[{"page":"012057","intvolume":"       651","citation":{"ama":"Camberg AA, Tröster T, Bohner F, Tölle J. Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. <i>IOP Conference Series: Materials Science and Engineering</i>. 2019;651:012057. doi:<a href=\"https://doi.org/10.1088/1757-899X/651/1/012057\">10.1088/1757-899X/651/1/012057</a>","chicago":"Camberg, Alan Adam, Thomas Tröster, F. Bohner, and J. Tölle. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.” <i>IOP Conference Series: Materials Science and Engineering</i> 651 (2019): 012057. <a href=\"https://doi.org/10.1088/1757-899X/651/1/012057\">https://doi.org/10.1088/1757-899X/651/1/012057</a>.","ieee":"A. A. Camberg, T. Tröster, F. Bohner, and J. Tölle, “Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications,” <i>IOP Conference Series: Materials Science and Engineering</i>, vol. 651, p. 012057, 2019.","apa":"Camberg, A. A., Tröster, T., Bohner, F., &#38; Tölle, J. (2019). Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. <i>IOP Conference Series: Materials Science and Engineering</i>, <i>651</i>, 012057. <a href=\"https://doi.org/10.1088/1757-899X/651/1/012057\">https://doi.org/10.1088/1757-899X/651/1/012057</a>","short":"A.A. Camberg, T. Tröster, F. Bohner, J. Tölle, IOP Conference Series: Materials Science and Engineering 651 (2019) 012057.","bibtex":"@article{Camberg_Tröster_Bohner_Tölle_2019, title={Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications}, volume={651}, DOI={<a href=\"https://doi.org/10.1088/1757-899X/651/1/012057\">10.1088/1757-899X/651/1/012057</a>}, journal={IOP Conference Series: Materials Science and Engineering}, author={Camberg, Alan Adam and Tröster, Thomas and Bohner, F. and Tölle, J.}, year={2019}, pages={012057} }","mla":"Camberg, Alan Adam, et al. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.” <i>IOP Conference Series: Materials Science and Engineering</i>, vol. 651, 2019, p. 012057, doi:<a href=\"https://doi.org/10.1088/1757-899X/651/1/012057\">10.1088/1757-899X/651/1/012057</a>."},"year":"2019","publication_identifier":{"issn":["1757-899X"]},"doi":"10.1088/1757-899X/651/1/012057","title":"Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications","volume":651,"date_created":"2020-02-11T10:21:57Z","author":[{"id":"60544","full_name":"Camberg, Alan Adam","last_name":"Camberg","first_name":"Alan Adam"},{"full_name":"Tröster, Thomas","id":"553","last_name":"Tröster","first_name":"Thomas"},{"first_name":"F.","last_name":"Bohner","full_name":"Bohner, F."},{"last_name":"Tölle","full_name":"Tölle, J.","first_name":"J."}],"date_updated":"2022-01-06T06:52:39Z","status":"public","publication":"IOP Conference Series: Materials Science and Engineering","type":"journal_article","language":[{"iso":"eng"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"60544","_id":"15875","project":[{"_id":"52","name":"Computing Resources Provided by the Paderborn Center for Parallel Computing"}]},{"publication_identifier":{"issn":["2452-3216"]},"publication_status":"published","page":"190-197","citation":{"ieee":"E. F. Akbulut Irmak and T. Tröster, “Fracture prediction of additively manufactured AlSi10Mg materials,” <i>Procedia Structural Integrity</i>, pp. 190–197, 2019.","chicago":"Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.” <i>Procedia Structural Integrity</i>, 2019, 190–97. <a href=\"https://doi.org/10.1016/j.prostr.2019.12.101\">https://doi.org/10.1016/j.prostr.2019.12.101</a>.","ama":"Akbulut Irmak EF, Tröster T. Fracture prediction of additively manufactured AlSi10Mg materials. <i>Procedia Structural Integrity</i>. 2019:190-197. doi:<a href=\"https://doi.org/10.1016/j.prostr.2019.12.101\">10.1016/j.prostr.2019.12.101</a>","apa":"Akbulut Irmak, E. F., &#38; Tröster, T. (2019). Fracture prediction of additively manufactured AlSi10Mg materials. <i>Procedia Structural Integrity</i>, 190–197. <a href=\"https://doi.org/10.1016/j.prostr.2019.12.101\">https://doi.org/10.1016/j.prostr.2019.12.101</a>","mla":"Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.” <i>Procedia Structural Integrity</i>, 2019, pp. 190–97, doi:<a href=\"https://doi.org/10.1016/j.prostr.2019.12.101\">10.1016/j.prostr.2019.12.101</a>.","short":"E.F. Akbulut Irmak, T. Tröster, Procedia Structural Integrity (2019) 190–197.","bibtex":"@article{Akbulut Irmak_Tröster_2019, title={Fracture prediction of additively manufactured AlSi10Mg materials}, DOI={<a href=\"https://doi.org/10.1016/j.prostr.2019.12.101\">10.1016/j.prostr.2019.12.101</a>}, journal={Procedia Structural Integrity}, author={Akbulut Irmak, Emine Fulya and Tröster, Thomas}, year={2019}, pages={190–197} }"},"year":"2019","author":[{"first_name":"Emine Fulya","id":"72008","full_name":"Akbulut Irmak, Emine Fulya","orcid":"0000-0002-1338-810X","last_name":"Akbulut Irmak"},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"}],"date_created":"2020-02-20T15:18:55Z","date_updated":"2022-01-06T06:52:41Z","doi":"10.1016/j.prostr.2019.12.101","title":"Fracture prediction of additively manufactured AlSi10Mg materials","publication":"Procedia Structural Integrity","type":"journal_article","status":"public","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","_id":"15950","project":[{"_id":"52","name":"Computing Resources Provided by the Paderborn Center for Parallel Computing"}],"language":[{"iso":"eng"}]},{"status":"public","type":"conference","language":[{"iso":"eng"}],"_id":"15976","project":[{"_id":"52","name":"Computing Resources Provided by the Paderborn Center for Parallel Computing"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"8938","year":"2019","citation":{"apa":"Akbulut Irmak, E. F., Hanses, J., Schweizer, S., &#38; Tröster, T. (2019). <i>Modeling the Energy Absorption Characteristics of Wood Crash Elements</i>. 12th European LS-DYNA Conference, Koblenz.","short":"E.F. Akbulut Irmak, J. Hanses, S. Schweizer, T. Tröster, in: 2019.","mla":"Akbulut Irmak, Emine Fulya, et al. <i>Modeling the Energy Absorption Characteristics of Wood Crash Elements</i>. 2019.","bibtex":"@inproceedings{Akbulut Irmak_Hanses_Schweizer_Tröster_2019, title={Modeling the Energy Absorption Characteristics of Wood Crash Elements}, author={Akbulut Irmak, Emine Fulya and Hanses, Julius and Schweizer, Swetlana and Tröster, Thomas}, year={2019} }","chicago":"Akbulut Irmak, Emine Fulya, Julius Hanses, Swetlana Schweizer, and Thomas Tröster. “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” 2019.","ieee":"E. F. Akbulut Irmak, J. Hanses, S. Schweizer, and T. Tröster, “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” presented at the 12th European LS-DYNA Conference, Koblenz, 2019.","ama":"Akbulut Irmak EF, Hanses J, Schweizer S, Tröster T. Modeling the Energy Absorption Characteristics of Wood Crash Elements. In: ; 2019."},"title":"Modeling the Energy Absorption Characteristics of Wood Crash Elements","conference":{"name":"12th European LS-DYNA Conference","start_date":"2019-05-14","end_date":"2019-05-16","location":"Koblenz"},"date_updated":"2022-01-06T06:52:41Z","date_created":"2020-02-21T15:31:51Z","author":[{"first_name":"Emine Fulya","full_name":"Akbulut Irmak, Emine Fulya","id":"72008","last_name":"Akbulut Irmak","orcid":"0000-0002-1338-810X"},{"full_name":"Hanses, Julius","last_name":"Hanses","first_name":"Julius"},{"id":"8938","full_name":"Schweizer, Swetlana","last_name":"Schweizer","first_name":"Swetlana"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}]},{"citation":{"mla":"Marten, Thorsten, and Thomas Tröster. <i>Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.","bibtex":"@book{Marten_Tröster_2019, place={Düsseldorf}, title={Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess}, publisher={Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH}, author={Marten, Thorsten and Tröster, Thomas}, year={2019} }","short":"T. Marten, T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess, Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2019.","apa":"Marten, T., &#38; Tröster, T. (2019). <i>Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH.","chicago":"Marten, Thorsten, and Thomas Tröster. <i>Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.","ieee":"T. Marten and T. Tröster, <i>Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.","ama":"Marten T, Tröster T. <i>Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH; 2019."},"place":"Düsseldorf","year":"2019","title":"Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess","date_created":"2020-02-24T14:35:08Z","author":[{"last_name":"Marten","full_name":"Marten, Thorsten","id":"338","first_name":"Thorsten"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"}],"publisher":"Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH","date_updated":"2022-01-06T06:52:42Z","status":"public","type":"report","report_number":"P920","language":[{"iso":"ger"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","_id":"16029"},{"language":[{"iso":"eng"}],"_id":"16032","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"45538","status":"public","type":"conference","title":"Self-sealing tool concept for RTM-processes","conference":{"name":"22nd International Conference on Composite Materials (ICCM22 2019)","start_date":"2019-08-12","end_date":"2019-08-16","location":"Melbourne "},"date_updated":"2022-04-19T05:36:46Z","author":[{"last_name":"Stallmeister","full_name":"Stallmeister, Tim","id":"45538","first_name":"Tim"},{"first_name":"Deviprasad","id":"49504","full_name":"Chalicheemalapalli Jayasankar, Deviprasad","last_name":"Chalicheemalapalli Jayasankar","orcid":"https://orcid.org/ 0000-0002-3446-2444"},{"last_name":"Wang","full_name":"Wang, Z.","first_name":"Z."},{"first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas","id":"553"}],"date_created":"2020-02-24T14:47:56Z","year":"2019","citation":{"ama":"Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Self-sealing tool concept for RTM-processes. In: ; 2019.","chicago":"Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Self-Sealing Tool Concept for RTM-Processes,” 2019.","ieee":"T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Self-sealing tool concept for RTM-processes,” presented at the 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne , 2019.","short":"T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.","mla":"Stallmeister, Tim, et al. <i>Self-Sealing Tool Concept for RTM-Processes</i>. 2019.","bibtex":"@inproceedings{Stallmeister_Chalicheemalapalli Jayasankar_Wang_Tröster_2019, title={Self-sealing tool concept for RTM-processes}, author={Stallmeister, Tim and Chalicheemalapalli Jayasankar, Deviprasad and Wang, Z. and Tröster, Thomas}, year={2019} }","apa":"Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &#38; Tröster, T. (2019). <i>Self-sealing tool concept for RTM-processes</i>. 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne ."},"publication_identifier":{"isbn":["9781925627220"]},"quality_controlled":"1"},{"type":"conference","quality_controlled":"1","status":"public","citation":{"apa":"Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., &#38; Tröster, T. (2019). <i>Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse</i>. Tagung Werkstoffprüfung 2019, Neu-Ulm.","short":"T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.","mla":"Stallmeister, Tim, et al. <i>Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse</i>. 2019.","bibtex":"@inproceedings{Stallmeister_Chalicheemalapalli Jayasankar_Wang_Tröster_2019, title={Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse}, author={Stallmeister, Tim and Chalicheemalapalli Jayasankar, Deviprasad and Wang, Z. and Tröster, Thomas}, year={2019} }","ieee":"T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” presented at the Tagung Werkstoffprüfung 2019, Neu-Ulm, 2019.","chicago":"Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” 2019.","ama":"Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. In: ; 2019."},"year":"2019","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"date_created":"2020-02-24T14:50:12Z","user_id":"45538","author":[{"full_name":"Stallmeister, Tim","id":"45538","last_name":"Stallmeister","first_name":"Tim"},{"first_name":"Deviprasad","id":"49504","full_name":"Chalicheemalapalli Jayasankar, Deviprasad","last_name":"Chalicheemalapalli Jayasankar","orcid":"https://orcid.org/ 0000-0002-3446-2444"},{"first_name":"Z.","last_name":"Wang","full_name":"Wang, Z."},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}],"_id":"16033","date_updated":"2022-04-19T05:37:38Z","conference":{"end_date":"2019-12-04","location":"Neu-Ulm","name":"Tagung Werkstoffprüfung 2019","start_date":"2019-12-03"},"language":[{"iso":"ger"}],"title":"Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse"},{"publication":"5th MATFEM Conference","type":"conference","popular_science":"1","status":"public","_id":"16027","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","language":[{"iso":"eng"}],"place":"München","year":"2019","citation":{"chicago":"Camberg, Alan Adam, Marius Striewe, Thomas Tröster, F. Bohner, and J. Tölle. “Investigation of Ductility and Fracture Behavior of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In <i>5th MATFEM Conference</i>. München: MATFEM, 2019.","ieee":"A. A. Camberg, M. Striewe, T. Tröster, F. Bohner, and J. Tölle, “Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions,” presented at the 5th MATFEM Conference, Schloss Hohenkammer, 2019.","ama":"Camberg AA, Striewe M, Tröster T, Bohner F, Tölle J. Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions. In: <i>5th MATFEM Conference</i>. MATFEM; 2019.","apa":"Camberg, A. A., Striewe, M., Tröster, T., Bohner, F., &#38; Tölle, J. (2019). Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions. <i>5th MATFEM Conference</i>. 5th MATFEM Conference, Schloss Hohenkammer.","mla":"Camberg, Alan Adam, et al. “Investigation of Ductility and Fracture Behavior of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” <i>5th MATFEM Conference</i>, MATFEM, 2019.","bibtex":"@inproceedings{Camberg_Striewe_Tröster_Bohner_Tölle_2019, place={München}, title={Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions}, booktitle={5th MATFEM Conference}, publisher={MATFEM}, author={Camberg, Alan Adam and Striewe, Marius and Tröster, Thomas and Bohner, F. and Tölle, J.}, year={2019} }","short":"A.A. Camberg, M. Striewe, T. Tröster, F. Bohner, J. Tölle, in: 5th MATFEM Conference, MATFEM, München, 2019."},"publisher":"MATFEM","date_updated":"2023-05-24T08:41:36Z","author":[{"first_name":"Alan Adam","full_name":"Camberg, Alan Adam","id":"60544","last_name":"Camberg"},{"last_name":"Striewe","id":"30228","full_name":"Striewe, Marius","first_name":"Marius"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"},{"first_name":"F.","full_name":"Bohner, F.","last_name":"Bohner"},{"full_name":"Tölle, J.","last_name":"Tölle","first_name":"J."}],"date_created":"2020-02-24T14:27:38Z","title":"Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions","conference":{"location":"Schloss Hohenkammer","name":"5th MATFEM Conference","start_date":"2019-05-07"}},{"department":[{"_id":"321"},{"_id":"157"},{"_id":"149"},{"_id":"9"},{"_id":"302"}],"user_id":"29413","_id":"16795","language":[{"iso":"eng"}],"alternative_title":["EFB-Forschungsbericht Nr. 516"],"type":"book","status":"public","date_created":"2020-04-22T06:58:01Z","author":[{"id":"29413","full_name":"Striewe, Jan André","last_name":"Striewe","first_name":"Jan André"},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"},{"first_name":"Jannik","full_name":"Kowatz, Jannik","id":"32252","orcid":"0000-0002-4972-4718","last_name":"Kowatz"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"},{"full_name":"Grothe, Richard","last_name":"Grothe","first_name":"Richard"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"}],"date_updated":"2023-05-25T15:57:46Z","publisher":"Europäische Forschungsgesellschaft für Blechverarbeitung","title":"Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK","citation":{"apa":"Striewe, J. A., Tröster, T., Kowatz, J., Meschut, G., Grothe, R., &#38; Grundmeier, G. (2019). <i>Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK</i>. Europäische Forschungsgesellschaft für Blechverarbeitung.","bibtex":"@book{Striewe_Tröster_Kowatz_Meschut_Grothe_Grundmeier_2019, place={Hannover}, title={Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK}, publisher={Europäische Forschungsgesellschaft für Blechverarbeitung}, author={Striewe, Jan André and Tröster, Thomas and Kowatz, Jannik and Meschut, Gerson and Grothe, Richard and Grundmeier, Guido}, year={2019} }","short":"J.A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, G. Grundmeier, Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK, Europäische Forschungsgesellschaft für Blechverarbeitung, Hannover, 2019.","mla":"Striewe, Jan André, et al. <i>Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK</i>. Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.","ama":"Striewe JA, Tröster T, Kowatz J, Meschut G, Grothe R, Grundmeier G. <i>Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK</i>. Europäische Forschungsgesellschaft für Blechverarbeitung; 2019.","ieee":"J. A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, and G. Grundmeier, <i>Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK</i>. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.","chicago":"Striewe, Jan André, Thomas Tröster, Jannik Kowatz, Gerson Meschut, Richard Grothe, and Guido Grundmeier. <i>Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK</i>. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019."},"place":"Hannover","year":"2019"},{"year":"2019","citation":{"mla":"Grothe, R., et al. <i>Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK</i>. 2019.","short":"R. Grothe, J.A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, G. Meschut, in: 2019.","bibtex":"@inproceedings{Grothe_Striewe_Kowatz_Grundmeier_Tröster_Meschut_2019, title={Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK}, author={Grothe, R. and Striewe, Jan André and Kowatz, Jannik and Grundmeier, Guido and Tröster, Thomas and Meschut, Gerson}, year={2019} }","apa":"Grothe, R., Striewe, J. A., Kowatz, J., Grundmeier, G., Tröster, T., &#38; Meschut, G. (2019). <i>Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK</i>. 39. EFB-Kolloquium, Bad Boll .","ama":"Grothe R, Striewe JA, Kowatz J, Grundmeier G, Tröster T, Meschut G. Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. In: ; 2019.","ieee":"R. Grothe, J. A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, and G. Meschut, “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” presented at the 39. EFB-Kolloquium, Bad Boll , 2019.","chicago":"Grothe, R., Jan André Striewe, Jannik Kowatz, Guido Grundmeier, Thomas Tröster, and Gerson Meschut. “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” 2019."},"date_updated":"2023-05-25T15:56:18Z","author":[{"full_name":"Grothe, R.","last_name":"Grothe","first_name":"R."},{"first_name":"Jan André","full_name":"Striewe, Jan André","id":"29413","last_name":"Striewe"},{"orcid":"0000-0002-4972-4718","last_name":"Kowatz","full_name":"Kowatz, Jannik","id":"32252","first_name":"Jannik"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"},{"full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"date_created":"2020-02-24T14:31:14Z","title":"Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK","conference":{"location":"Bad Boll ","end_date":"2019-04-03","start_date":"2019-04-02","name":"39. EFB-Kolloquium"},"type":"conference","status":"public","_id":"16028","user_id":"29413","department":[{"_id":"321"},{"_id":"149"},{"_id":"157"},{"_id":"9"},{"_id":"302"}],"language":[{"iso":"ger"}]},{"language":[{"iso":"eng"}],"_id":"59978","user_id":"15952","department":[{"_id":"9"},{"_id":"149"},{"_id":"321"}],"abstract":[{"text":"In latest body-in-white (BIW) concepts, engineers take into account a wider range of different materials to pursue a multi-material design approach. However, the lightweight potential of common materials like steel, aluminum or even fiber-reinforcement plastics (FRP) is limited. In keeping with the motto “the best material for the best application”, a new approach for a top-down material design is introduced. With the aim to develop an application tailored material, the multi-material concept is adapted for the thickness dimension of the component. Within this contribution a new optimization- based design methodology is applied on a stiffness relevant car body part. Starting with benchmark simulations of a reference BIW structure, a critical car body component is determined by an internal energy based method and a subsequent sensitivity analysis. The identified demonstrator component is later subdivided into multiple layers and submitted to a first optimization loop in which the developed methodology varies the material parameters for each single layer. Once an optimum for the through-thickness properties of the part is found, further optimization loops with concrete material pendants and manufacturing restrictions are carried out. The result is a hybrid laminate part consisting of steel and FRP plies. To achieve a further improvement in body characteristics and lightweight, the investigated part is redesigned by the aim of topology optimization. Finally, the tailored hybrid stacks are validated in BIW simulations and compared with the reference. The optimization-based approach allows a weight reduction up to 25 % while maintaining or even improving the BIW properties.","lang":"eng"}],"status":"public","type":"book_chapter","publication":"Zukunftstechnologien für den multifunktionalen Leichtbau","title":"TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES","doi":"10.1007/978-3-662-58206-0_12","publisher":"Springer Berlin Heidelberg","date_updated":"2025-05-19T06:56:19Z","date_created":"2025-05-19T06:54:59Z","author":[{"first_name":"Alan Adam","full_name":"Camberg, Alan Adam","id":"60544","last_name":"Camberg"},{"first_name":"Ina","full_name":"Stratmann, Ina","last_name":"Stratmann"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}],"year":"2019","place":"Berlin, Heidelberg","citation":{"ama":"Camberg AA, Stratmann I, Tröster T. TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In: <i>Zukunftstechnologien Für Den Multifunktionalen Leichtbau</i>. Springer Berlin Heidelberg; 2019. doi:<a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">10.1007/978-3-662-58206-0_12</a>","chicago":"Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” In <i>Zukunftstechnologien Für Den Multifunktionalen Leichtbau</i>. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. <a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">https://doi.org/10.1007/978-3-662-58206-0_12</a>.","ieee":"A. A. Camberg, I. Stratmann, and T. Tröster, “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES,” in <i>Zukunftstechnologien für den multifunktionalen Leichtbau</i>, Berlin, Heidelberg: Springer Berlin Heidelberg, 2019.","mla":"Camberg, Alan Adam, et al. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” <i>Zukunftstechnologien Für Den Multifunktionalen Leichtbau</i>, Springer Berlin Heidelberg, 2019, doi:<a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">10.1007/978-3-662-58206-0_12</a>.","bibtex":"@inbook{Camberg_Stratmann_Tröster_2019, place={Berlin, Heidelberg}, title={TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES}, DOI={<a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">10.1007/978-3-662-58206-0_12</a>}, booktitle={Zukunftstechnologien für den multifunktionalen Leichtbau}, publisher={Springer Berlin Heidelberg}, author={Camberg, Alan Adam and Stratmann, Ina and Tröster, Thomas}, year={2019} }","short":"A.A. Camberg, I. Stratmann, T. Tröster, in: Zukunftstechnologien Für Den Multifunktionalen Leichtbau, Springer Berlin Heidelberg, Berlin, Heidelberg, 2019.","apa":"Camberg, A. A., Stratmann, I., &#38; Tröster, T. (2019). TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In <i>Zukunftstechnologien für den multifunktionalen Leichtbau</i>. Springer Berlin Heidelberg. <a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">https://doi.org/10.1007/978-3-662-58206-0_12</a>"},"publication_status":"published","publication_identifier":{"isbn":["9783662582053","9783662582060"],"issn":["2524-4787","2524-4795"]},"quality_controlled":"1"},{"citation":{"ama":"Camberg AA, Stratmann I, Tröster T. TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In: <i>Technologies for Economical and Functional Lightweight Design</i>. ; 2019. doi:<a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">10.1007/978-3-662-58206-0_12</a>","ieee":"A. A. Camberg, I. Stratmann, and T. Tröster, “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES,” in <i>Technologies for economical and functional lightweight design</i>, Berlin, Heidelberg, 2019.","chicago":"Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” In <i>Technologies for Economical and Functional Lightweight Design</i>. Berlin, Heidelberg, 2019. <a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">https://doi.org/10.1007/978-3-662-58206-0_12</a>.","bibtex":"@inbook{Camberg_Stratmann_Tröster_2019, place={Berlin, Heidelberg}, title={TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES}, DOI={<a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">10.1007/978-3-662-58206-0_12</a>}, booktitle={Technologies for economical and functional lightweight design}, author={Camberg, Alan Adam and Stratmann, Ina and Tröster, Thomas}, year={2019} }","short":"A.A. Camberg, I. Stratmann, T. Tröster, in: Technologies for Economical and Functional Lightweight Design, Berlin, Heidelberg, 2019.","mla":"Camberg, Alan Adam, et al. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” <i>Technologies for Economical and Functional Lightweight Design</i>, 2019, doi:<a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">10.1007/978-3-662-58206-0_12</a>.","apa":"Camberg, A. A., Stratmann, I., &#38; Tröster, T. (2019). TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In <i>Technologies for economical and functional lightweight design</i>. <a href=\"https://doi.org/10.1007/978-3-662-58206-0_12\">https://doi.org/10.1007/978-3-662-58206-0_12</a>"},"place":"Berlin, Heidelberg","year":"2019","publication_status":"published","publication_identifier":{"isbn":["9783662582053","9783662582060"],"issn":["2524-4787","2524-4795"]},"doi":"10.1007/978-3-662-58206-0_12","title":"TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES","date_created":"2019-09-22T17:33:23Z","author":[{"id":"60544","full_name":"Camberg, Alan Adam","last_name":"Camberg","first_name":"Alan Adam"},{"full_name":"Stratmann, Ina","last_name":"Stratmann","first_name":"Ina"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}],"date_updated":"2025-06-06T08:43:04Z","status":"public","type":"book_chapter","publication":"Technologies for economical and functional lightweight design","language":[{"iso":"eng"}],"user_id":"15952","department":[{"_id":"149"},{"_id":"9"},{"_id":"321"}],"project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"_id":"13436"},{"publication_identifier":{"isbn":["978-3-95735-104-3"]},"publication_status":"published","year":"2019","citation":{"ama":"Triebus M, Bienia S, Marten T, Tröster T, Dröder K. Press Hardening Integrated Structuring for Hybrid Components. In: Oldenburg M, Hardell J, Casellas D, eds. <i>Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel</i>. Verlag Wissenschaftliche Scripten; 2019.","ieee":"M. Triebus, S. Bienia, T. Marten, T. Tröster, and K. Dröder, “Press Hardening Integrated Structuring for Hybrid Components,” in <i>Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel</i>, Lulea, Sweden, 2019.","chicago":"Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder. “Press Hardening Integrated Structuring for Hybrid Components.” In <i>Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel</i>, edited by Mats Oldenburg, Jens Hardell, and Daniel Casellas. Verlag Wissenschaftliche Scripten, 2019.","bibtex":"@inproceedings{Triebus_Bienia_Marten_Tröster_Dröder_2019, title={Press Hardening Integrated Structuring for Hybrid Components}, booktitle={Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel}, publisher={Verlag Wissenschaftliche Scripten}, author={Triebus, Marcel and Bienia, S. and Marten, Thorsten and Tröster, Thomas and Dröder, K.}, editor={Oldenburg, Mats and Hardell, Jens and Casellas, Daniel}, year={2019} }","short":"M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: M. Oldenburg, J. Hardell, D. Casellas (Eds.), Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel, Verlag Wissenschaftliche Scripten, 2019.","mla":"Triebus, Marcel, et al. “Press Hardening Integrated Structuring for Hybrid Components.” <i>Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel</i>, edited by Mats Oldenburg et al., Verlag Wissenschaftliche Scripten, 2019.","apa":"Triebus, M., Bienia, S., Marten, T., Tröster, T., &#38; Dröder, K. (2019). Press Hardening Integrated Structuring for Hybrid Components. In M. Oldenburg, J. Hardell, &#38; D. Casellas (Eds.), <i>Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel</i>. Verlag Wissenschaftliche Scripten."},"date_updated":"2026-02-16T15:24:39Z","publisher":"Verlag Wissenschaftliche Scripten","author":[{"last_name":"Triebus","full_name":"Triebus, Marcel","id":"66036","first_name":"Marcel"},{"first_name":"S.","full_name":"Bienia, S.","last_name":"Bienia"},{"last_name":"Marten","orcid":"0009-0001-6433-7839","id":"338","full_name":"Marten, Thorsten","first_name":"Thorsten"},{"first_name":"Thomas","last_name":"Tröster","id":"553","full_name":"Tröster, Thomas"},{"last_name":"Dröder","full_name":"Dröder, K.","first_name":"K."}],"date_created":"2020-02-24T14:41:21Z","title":"Press Hardening Integrated Structuring for Hybrid Components","conference":{"name":"7th International Conference on Hot Sheet Metal Forming of High-Performance Steel","start_date":"2019-06-02","end_date":"2019-06-05","location":"Lulea, Sweden"},"publication":"Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel","type":"conference","editor":[{"full_name":"Oldenburg, Mats","last_name":"Oldenburg","first_name":"Mats"},{"first_name":"Jens","full_name":"Hardell, Jens","last_name":"Hardell"},{"full_name":"Casellas, Daniel","last_name":"Casellas","first_name":"Daniel"}],"status":"public","_id":"16030","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"338","language":[{"iso":"eng"}]},{"report_number":"P920","type":"report","status":"public","user_id":"338","series_title":"Forschung für die Praxis","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"_id":"64186","language":[{"iso":"ger"}],"publication_status":"published","publication_identifier":{"isbn":["978-3-946885-33-7"]},"citation":{"chicago":"Marten, Thorsten, Thomas Tröster, and Rainer Salomon. <i>P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Forschung für die Praxis. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2019.","ieee":"T. Marten, T. Tröster, and R. Salomon, <i>P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2019.","ama":"Marten T, Tröster T, Salomon R. <i>P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Verlag und Vertriebsgesellschaft mbH; 2019.","apa":"Marten, T., Tröster, T., &#38; Salomon, R. (2019). <i>P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Verlag und Vertriebsgesellschaft mbH.","mla":"Marten, Thorsten, et al. <i>P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess</i>. Verlag und Vertriebsgesellschaft mbH, 2019.","bibtex":"@book{Marten_Tröster_Salomon_2019, place={Düsseldorf}, series={Forschung für die Praxis}, title={P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess}, publisher={Verlag und Vertriebsgesellschaft mbH}, author={Marten, Thorsten and Tröster, Thomas and Salomon, Rainer}, year={2019}, collection={Forschung für die Praxis} }","short":"T. Marten, T. Tröster, R. Salomon, P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2019."},"place":"Düsseldorf","year":"2019","author":[{"first_name":"Thorsten","id":"338","full_name":"Marten, Thorsten","orcid":"0009-0001-6433-7839","last_name":"Marten"},{"full_name":"Tröster, Thomas","id":"553","last_name":"Tröster","first_name":"Thomas"},{"first_name":"Rainer","last_name":"Salomon","full_name":"Salomon, Rainer"}],"date_created":"2026-02-17T09:38:26Z","date_updated":"2026-02-17T09:50:27Z","publisher":"Verlag und Vertriebsgesellschaft mbH","title":"P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess"},{"conference":{"end_date":"2018-09-27","location":"Darmstadt","name":"Materials Science and Engineering (MSE) Congress 2018","start_date":"2018-09-25"},"title":"Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions","date_created":"2020-10-04T19:23:56Z","author":[{"first_name":"Alan Adam","id":"60544","full_name":"Camberg, Alan Adam","last_name":"Camberg"},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"},{"first_name":"Nikolay","full_name":"Sotirov, Nikolay","last_name":"Sotirov"},{"full_name":"Tölle, Jörn","last_name":"Tölle","first_name":"Jörn"},{"first_name":"Friedrich","last_name":"Bohner","full_name":"Bohner, Friedrich"}],"date_updated":"2022-01-06T06:54:14Z","citation":{"ieee":"A. A. Camberg, T. Tröster, N. Sotirov, J. Tölle, and F. Bohner, “Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions,” in <i>Materials Science and Engineering (MSE) Congress 2018</i>, Darmstadt, 2018.","chicago":"Camberg, Alan Adam, Thomas Tröster, Nikolay Sotirov, Jörn Tölle, and Friedrich Bohner. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In <i>Materials Science and Engineering (MSE) Congress 2018</i>. Darmstadt, 2018.","ama":"Camberg AA, Tröster T, Sotirov N, Tölle J, Bohner F. Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions. In: <i>Materials Science and Engineering (MSE) Congress 2018</i>. Darmstadt; 2018.","mla":"Camberg, Alan Adam, et al. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” <i>Materials Science and Engineering (MSE) Congress 2018</i>, 2018.","bibtex":"@inproceedings{Camberg_Tröster_Sotirov_Tölle_Bohner_2018, place={Darmstadt}, title={Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions}, booktitle={Materials Science and Engineering (MSE) Congress 2018}, author={Camberg, Alan Adam and Tröster, Thomas and Sotirov, Nikolay and Tölle, Jörn and Bohner, Friedrich}, year={2018} }","short":"A.A. Camberg, T. Tröster, N. Sotirov, J. Tölle, F. Bohner, in: Materials Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.","apa":"Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., &#38; Bohner, F. (2018). Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions. In <i>Materials Science and Engineering (MSE) Congress 2018</i>. Darmstadt."},"place":"Darmstadt","year":"2018","publication_status":"published","language":[{"iso":"eng"}],"user_id":"60544","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"project":[{"_id":"52","name":"Computing Resources Provided by the Paderborn Center for Parallel Computing"}],"_id":"19868","status":"public","type":"conference_abstract","publication":"Materials Science and Engineering (MSE) Congress 2018"},{"status":"public","type":"misc","language":[{"iso":"eng"}],"user_id":"11829","department":[{"_id":"49"},{"_id":"149"},{"_id":"219"}],"_id":"6594","citation":{"bibtex":"@book{Claes_Zeipert_Koppa_Tröster_Henning_2018, place={Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck}, title={Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen}, author={Claes, Leander and Zeipert, Henning and Koppa, Peter and Tröster, Thomas and Henning, Bernd}, year={2018} }","short":"L. Claes, H. Zeipert, P. Koppa, T. Tröster, B. Henning, Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen, Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.","mla":"Claes, Leander, et al. <i>Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen</i>. 2018.","apa":"Claes, L., Zeipert, H., Koppa, P., Tröster, T., &#38; Henning, B. (2018). <i>Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen</i>. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck.","ama":"Claes L, Zeipert H, Koppa P, Tröster T, Henning B. <i>Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen</i>. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck; 2018.","ieee":"L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, <i>Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen</i>. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.","chicago":"Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. <i>Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen</i>. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018."},"year":"2018","place":"Workshop \"Messtechnische Anwendungen von Ultraschall\", Drübeck","title":"Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen","author":[{"orcid":"0000-0002-4393-268X","last_name":"Claes","id":"11829","full_name":"Claes, Leander","first_name":"Leander"},{"last_name":"Zeipert","id":"32580","full_name":"Zeipert, Henning","first_name":"Henning"},{"full_name":"Koppa, Peter","last_name":"Koppa","first_name":"Peter"},{"first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas","id":"553"},{"id":"213","full_name":"Henning, Bernd","last_name":"Henning","first_name":"Bernd"}],"date_created":"2019-01-09T16:12:23Z","date_updated":"2022-01-06T07:03:13Z"},{"type":"conference","publication":"HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS","status":"public","user_id":"60544","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"_id":"16034","language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"isbn":["978-3-88355-417-4"]},"citation":{"chicago":"Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” In <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>. DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.","ieee":"A. A. Camberg and T. Tröster, “Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures,” in <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>, Bremen, 2018.","ama":"Camberg AA, Tröster T. Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In: <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>. DGM - Deutsche Gesellschaft für Materialkunde e.V.; 2018.","short":"A.A. Camberg, T. Tröster, in: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.","bibtex":"@inproceedings{Camberg_Tröster_2018, title={Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures}, booktitle={HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS}, publisher={DGM - Deutsche Gesellschaft für Materialkunde e.V.}, author={Camberg, Alan Adam and Tröster, Thomas}, year={2018} }","mla":"Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.","apa":"Camberg, A. A., &#38; Tröster, T. (2018). Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>. Bremen: DGM - Deutsche Gesellschaft für Materialkunde e.V."},"year":"2018","date_created":"2020-02-24T14:59:47Z","author":[{"first_name":"Alan Adam","full_name":"Camberg, Alan Adam","id":"60544","last_name":"Camberg"},{"first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas","id":"553"}],"publisher":"DGM - Deutsche Gesellschaft für Materialkunde e.V.","date_updated":"2022-01-06T06:52:42Z","conference":{"start_date":"2018-04-18","name":"3rd International Conference on Hybrid Materials and Structures","location":"Bremen","end_date":"2018-04-19"},"title":"Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures"},{"citation":{"ama":"Ahlers D, Tröster T. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. In: ; 2018.","ieee":"D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.","chicago":"Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” 2018.","apa":"Ahlers, D., &#38; Tröster, T. (2018). Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.","short":"D. Ahlers, T. Tröster, in: 2018.","bibtex":"@inproceedings{Ahlers_Tröster_2018, title={Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V}, author={Ahlers, Dominik and Tröster, Thomas}, year={2018} }","mla":"Ahlers, Dominik, and Thomas Tröster. <i>Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V</i>. 2018."},"year":"2018","date_created":"2020-02-24T15:57:52Z","author":[{"first_name":"Dominik","last_name":"Ahlers","id":"11207","full_name":"Ahlers, Dominik"},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"}],"date_updated":"2022-01-06T06:52:42Z","conference":{"location":"Erfurt","start_date":"2018-06-07","name":"Rapid.Tech 2018 – Fachforum Luftfahrt"},"title":"Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V","type":"conference","status":"public","user_id":"11207","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"},{"_id":"219"}],"_id":"16039","language":[{"iso":"ger"}]},{"citation":{"bibtex":"@inproceedings{Wang_Tröster_2018, title={Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding}, author={Wang, Z. and Tröster, Thomas}, year={2018} }","mla":"Wang, Z., and Thomas Tröster. <i>Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding</i>. 2018.","short":"Z. Wang, T. Tröster, in: 2018.","apa":"Wang, Z., &#38; Tröster, T. (2018). Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. Presented at the 21th International Conference on Composite Structures (ICCS21), Bologna, Italy.","ieee":"Z. Wang and T. Tröster, “Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding,” presented at the 21th International Conference on Composite Structures (ICCS21), Bologna, Italy, 2018.","chicago":"Wang, Z., and Thomas Tröster. “Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding,” 2018.","ama":"Wang Z, Tröster T. Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. In: ; 2018."},"year":"2018","conference":{"location":"Bologna, Italy","end_date":"2018-09-07","start_date":"2018-09-04","name":"21th International Conference on Composite Structures (ICCS21)"},"title":"Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding","date_created":"2020-02-24T15:59:53Z","author":[{"first_name":"Z.","last_name":"Wang","full_name":"Wang, Z."},{"first_name":"Thomas","last_name":"Tröster","id":"553","full_name":"Tröster, Thomas"}],"date_updated":"2022-01-06T06:52:42Z","status":"public","type":"conference","language":[{"iso":"eng"}],"user_id":"72008","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"_id":"16040"},{"author":[{"last_name":"Triebus","full_name":"Triebus, Marcel","id":"66036","first_name":"Marcel"},{"full_name":"Tröster, Thomas","id":"553","last_name":"Tröster","first_name":"Thomas"},{"first_name":"Alan Adam","id":"60544","full_name":"Camberg, Alan Adam","last_name":"Camberg"},{"full_name":"Bienia, S.","last_name":"Bienia","first_name":"S."},{"full_name":"Dröder, K.","last_name":"Dröder","first_name":"K."}],"date_created":"2020-02-24T16:03:13Z","date_updated":"2022-01-06T06:52:42Z","oa":"1","main_file_link":[{"url":"https://www.dynamore.de/de/download/papers/2018-ls-dyna-forum/papers-2018/montag-15.-oktober-2018/crash-lightweight-composites/modelling-the-interface-of-hybrid-metal-frp-components-joint-by-form-closures","open_access":"1"}],"conference":{"end_date":"2018-10-17","location":"Bamberg","name":"15. Deutsches LS-Dyna Forum","start_date":"2018-10-15"},"title":"Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures","citation":{"apa":"Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., &#38; Dröder, K. (2018). Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In <i>15. Deutsches LS-Dyna Forum</i>. Bamberg.","mla":"Triebus, Marcel, et al. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” <i>15. Deutsches LS-Dyna Forum</i>, 2018.","short":"M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches LS-Dyna Forum, 2018.","bibtex":"@inproceedings{Triebus_Tröster_Camberg_Bienia_Dröder_2018, title={Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures}, booktitle={15. Deutsches LS-Dyna Forum}, author={Triebus, Marcel and Tröster, Thomas and Camberg, Alan Adam and Bienia, S. and Dröder, K.}, year={2018} }","ama":"Triebus M, Tröster T, Camberg AA, Bienia S, Dröder K. Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In: <i>15. Deutsches LS-Dyna Forum</i>. ; 2018.","chicago":"Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” In <i>15. Deutsches LS-Dyna Forum</i>, 2018.","ieee":"M. Triebus, T. Tröster, A. A. Camberg, S. Bienia, and K. Dröder, “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures,” in <i>15. Deutsches LS-Dyna Forum</i>, Bamberg, 2018."},"year":"2018","user_id":"60544","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"_id":"16042","language":[{"iso":"eng"}],"popular_science":"1","type":"conference","publication":"15. Deutsches LS-Dyna Forum","status":"public"},{"year":"2018","citation":{"ieee":"A. A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , and J. Tölle, “The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming,” in <i>15. Deutsches LS-Dyna Forum</i>, Bamberg, 2018.","chicago":"Camberg, Alan Adam, Thomas Tröster, A. Schneidt , N. Sotirov , and J. Tölle. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” In <i>15. Deutsches LS-Dyna Forum</i>, 2018.","ama":"Camberg AA, Tröster T, Schneidt  A, Sotirov  N, Tölle J. The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In: <i>15. Deutsches LS-Dyna Forum</i>. ; 2018.","apa":"Camberg, A. A., Tröster, T., Schneidt , A., Sotirov , N., &#38; Tölle, J. (2018). The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In <i>15. Deutsches LS-Dyna Forum</i>. Bamberg.","mla":"Camberg, Alan Adam, et al. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” <i>15. Deutsches LS-Dyna Forum</i>, 2018.","short":"A.A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , J. Tölle, in: 15. Deutsches LS-Dyna Forum, 2018.","bibtex":"@inproceedings{Camberg_Tröster_Schneidt _Sotirov _Tölle_2018, title={The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming}, booktitle={15. Deutsches LS-Dyna Forum}, author={Camberg, Alan Adam and Tröster, Thomas and Schneidt , A. and Sotirov , N. and Tölle, J.}, year={2018} }"},"date_updated":"2022-01-06T06:52:42Z","oa":"1","date_created":"2020-02-24T16:05:37Z","author":[{"full_name":"Camberg, Alan Adam","id":"60544","last_name":"Camberg","first_name":"Alan Adam"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"},{"first_name":"A.","full_name":"Schneidt , A.","last_name":"Schneidt "},{"last_name":"Sotirov ","full_name":"Sotirov , N.","first_name":"N."},{"first_name":"J.","full_name":"Tölle, J.","last_name":"Tölle"}],"title":"The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming","main_file_link":[{"open_access":"1","url":"https://www.dynamore.de/de/download/papers/2018-ls-dyna-forum/papers-2018/dienstag-16.-oktober/process-metal-forming-iii/the-influence-of-damage-accumulation-on-failure-prediction-a-comparative-assessment-of-mat_224-and-mat_024-gissmo-for-the-application-in-non-isothermal-sheet-metal-forming"}],"conference":{"start_date":"2018-10-15","name":"15. Deutsches LS-Dyna Forum","location":"Bamberg","end_date":"2018-10-17"},"popular_science":"1","type":"conference","publication":"15. Deutsches LS-Dyna Forum","status":"public","_id":"16043","user_id":"60544","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"language":[{"iso":"eng"}]}]