[{"type":"conference","publication":"Special Interest Group Meeting: Advancing Precision in Additive Manufacturing","status":"public","abstract":[{"lang":"eng","text":"Additive Manufacturing (AM) processes generate plastic or metal parts layer-by-layer without using formative tools. The resulting advantages highlight the capability of AM to become an inherent part within the product development. However, process specific challenges such as a high surface roughness, the stair-stepping effect or geometrical deviations inhibit the industrial establishment. Thus, additively manufactured parts often need to be post-processed using established manufacturing processes. Many process parameters and geometrical factors influence the manufacturing accuracy in AM which can lead to large deviations and high scatterings. Published results concerning these deviations are also difficult to compare, because they are based on several geometries that are manufactured using different processes, materials and machine settings. It is emphasized that reliable tolerances for AM are difficult to define in standards. Within this investigation, a uniform method was developed regarding relevant test specimens to examine geometrical deviations for Laser Beam Melting (LBM), Fused Deposition Modeling (FDM) and Selective Laser Sintering (SLS) in order to derive geometrical tolerance values. The manufactured test specimens were measured using tactile and optical systems to examine the occurring geometrical deviations. The results show possible geometrical tolerance values that were classified according to the international standard DIN EN ISO 286-1."}],"user_id":"38077","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"_id":"22443","language":[{"iso":"eng"}],"citation":{"ieee":"T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,” in <i>Special Interest Group Meeting: Advancing Precision in Additive Manufacturing</i>, 2019.","chicago":"Lieneke, Tobias, Thomas Künneke, Fabian Schlenker, Vera Denzer, and Detmar Zimmer. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.” In <i>Special Interest Group Meeting: Advancing Precision in Additive Manufacturing</i>, 2019. <a href=\"https://www.euspen.eu/knowledge-base/AM19129.pdf\">https://www.euspen.eu/knowledge-base/AM19129.pdf</a>.","ama":"Lieneke T, Künneke T, Schlenker F, Denzer V, Zimmer D. Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances. In: <i>Special Interest Group Meeting: Advancing Precision in Additive Manufacturing</i>. ; 2019. doi:<a href=\"https://www.euspen.eu/knowledge-base/AM19129.pdf\">https://www.euspen.eu/knowledge-base/AM19129.pdf</a>","apa":"Lieneke, T., Künneke, T., Schlenker, F., Denzer, V., &#38; Zimmer, D. (2019). Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances. In <i>Special Interest Group Meeting: Advancing Precision in Additive Manufacturing</i>. <a href=\"https://www.euspen.eu/knowledge-base/AM19129.pdf\">https://www.euspen.eu/knowledge-base/AM19129.pdf</a>","bibtex":"@inproceedings{Lieneke_Künneke_Schlenker_Denzer_Zimmer_2019, title={Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances}, DOI={<a href=\"https://www.euspen.eu/knowledge-base/AM19129.pdf\">https://www.euspen.eu/knowledge-base/AM19129.pdf</a>}, booktitle={Special Interest Group Meeting: Advancing Precision in Additive Manufacturing}, author={Lieneke, Tobias and Künneke, Thomas and Schlenker, Fabian and Denzer, Vera and Zimmer, Detmar}, year={2019} }","mla":"Lieneke, Tobias, et al. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances.” <i>Special Interest Group Meeting: Advancing Precision in Additive Manufacturing</i>, 2019, doi:<a href=\"https://www.euspen.eu/knowledge-base/AM19129.pdf\">https://www.euspen.eu/knowledge-base/AM19129.pdf</a>.","short":"T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, D. Zimmer, in: Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019."},"year":"2019","date_created":"2021-06-15T11:10:17Z","author":[{"first_name":"Tobias","id":"13956","full_name":"Lieneke, Tobias","last_name":"Lieneke"},{"last_name":"Künneke","full_name":"Künneke, Thomas","id":"13226","first_name":"Thomas"},{"last_name":"Schlenker","full_name":"Schlenker, Fabian","first_name":"Fabian"},{"first_name":"Vera","full_name":"Denzer, Vera","last_name":"Denzer"},{"last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604","first_name":"Detmar"}],"date_updated":"2022-01-06T06:55:33Z","doi":"https://www.euspen.eu/knowledge-base/AM19129.pdf","title":"Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances"},{"_id":"22444","user_id":"38077","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"language":[{"iso":"eng"}],"type":"journal_article","publication":"konstruktionspraxis","status":"public","date_updated":"2022-01-06T06:55:33Z","publisher":"Vogel Communications Groupe GmbH & Co. KG","author":[{"last_name":"Künneke","full_name":"Künneke, Thomas","id":"13226","first_name":"Thomas"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"date_created":"2021-06-15T11:10:18Z","volume":6,"title":"Schall mittels Pulver dämpfen","publication_identifier":{"isbn":["0937-4167"]},"year":"2019","citation":{"bibtex":"@article{Künneke_Zimmer_2019, title={Schall mittels Pulver dämpfen}, volume={6}, journal={konstruktionspraxis}, publisher={Vogel Communications Groupe GmbH &#38; Co. KG}, author={Künneke, Thomas and Zimmer, Detmar}, year={2019}, pages={24–26} }","mla":"Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” <i>Konstruktionspraxis</i>, vol. 6, Vogel Communications Groupe GmbH &#38; Co. KG, 2019, pp. 24–26.","short":"T. Künneke, D. Zimmer, Konstruktionspraxis 6 (2019) 24–26.","apa":"Künneke, T., &#38; Zimmer, D. (2019). Schall mittels Pulver dämpfen. <i>Konstruktionspraxis</i>, <i>6</i>, 24–26.","ama":"Künneke T, Zimmer D. Schall mittels Pulver dämpfen. <i>konstruktionspraxis</i>. 2019;6:24-26.","chicago":"Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” <i>Konstruktionspraxis</i> 6 (2019): 24–26.","ieee":"T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” <i>konstruktionspraxis</i>, vol. 6, pp. 24–26, 2019."},"page":"24-26","intvolume":"         6"},{"date_created":"2021-06-15T11:10:15Z","author":[{"full_name":"Lammers, Stefan","id":"13835","last_name":"Lammers","first_name":"Stefan"},{"first_name":"Johannes","full_name":"Tominski, Johannes","last_name":"Tominski"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"date_updated":"2023-05-04T07:26:59Z","doi":"http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf","title":"Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization","quality_controlled":"1","publication_identifier":{"isbn":["978-84-949194-8-0"]},"page":"174-185","citation":{"ama":"Lammers S, Tominski J, Zimmer D. Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization. In: <i>II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019</i>. ; 2019:174-185. doi:<a href=\"http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf\">http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf</a>","ieee":"S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization,” in <i>II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019</i>, 2019, pp. 174–185, doi: <a href=\"http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf\">http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf</a>.","chicago":"Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology Optimization.” In <i>II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019</i>, 174–85, 2019. <a href=\"http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf\">http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf</a>.","bibtex":"@inproceedings{Lammers_Tominski_Zimmer_2019, title={Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization}, DOI={<a href=\"http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf\">http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf</a>}, booktitle={II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019}, author={Lammers, Stefan and Tominski, Johannes and Zimmer, Detmar}, year={2019}, pages={174–185} }","short":"S. Lammers, J. Tominski, D. Zimmer, in: II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185.","mla":"Lammers, Stefan, et al. “Guidelines for Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology Optimization.” <i>II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019</i>, 2019, pp. 174–85, doi:<a href=\"http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf\">http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf</a>.","apa":"Lammers, S., Tominski, J., &#38; Zimmer, D. (2019). Guidelines for post processing oriented design of additive manufactured parts for use in topology optimization. <i>II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019</i>, 174–185. <a href=\"http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf\">http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf</a>"},"year":"2019","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"user_id":"13835","_id":"22441","language":[{"iso":"eng"}],"publication":"II International Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September, 2019","type":"conference","status":"public","abstract":[{"lang":"eng","text":"According to ISO / ASTM 52900, additive manufacturing (AM) is defined as \"the process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to conventional manufacturing including subtractive manufacturing technologies and formative manufacturing methodologies” [1]. This results in significant advantages over conventional manufacturing methodologies, such as the production of topologically optimized, complex structures, lower material consumption or shorter product development cycles. In order to be able to use these advantages, the possibilities and restrictions of the processes must be known. In particular, selective laser beam melting (SLM), in which a powdery metallic starting material is melted by means of a laser, requires a sound understanding of the process. For this purpose, design guidelines have been presented in various scientific papers. These design guidelines help to design a component in such a way that it can be manufactured successfully using additive manufacturing. These so-called “AMsuitable design guidelines” can be found among others at Adam, Kranz and Thomas [2,3,4,5]. In contrast to established manufacturing processes, the post-processing of additive components is divided into two steps. First, the AM immanent post processing, such as the removing of the component from the building platform or the removing of the remaining powder. These post-processing steps are in the following referred to “post-processing”. Secondly, the subsequent post-processing steps to improve the component properties, such as milling and turning or a stress-relief annealing. These are referred to as “finishing” and form the focus of this paper. With regard to a successful finishing of additively manufactured components, design guidelines must be taken into account that consider the finishing inherent restrictions and possibilities. In the following, these design guidelines are referred to “finishing suitable”. They can deviate significantly from those of conventionally manufactured components in the case of additively manufactured components. Although there are some investigations that deal with the post-processing of additively manufactured components [6,7], there are hardly any design guidelines that are suitable for finishing [8]. Therefore, knowledge about the finishing of additively manufactured components is based on experimental experience rather than on scientific knowledge. For this reason, design guidelines for a finishing suitable design must be methodically determined and quantified. These quantified design guidelines can be used for an automated design check on complex components like topology optimized geometries."}]},{"type":"conference","publication":"2018 IEEE Transportation Electrification Conference and Expo (ITEC)","status":"public","_id":"24105","user_id":"48411","department":[{"_id":"9"},{"_id":"158"},{"_id":"146"}],"language":[{"iso":"eng"}],"publication_status":"published","year":"2018","citation":{"chicago":"Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>, 2018. <a href=\"https://doi.org/10.1109/itec.2018.8450250\">https://doi.org/10.1109/itec.2018.8450250</a>.","ieee":"S. Urbanek <i>et al.</i>, “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: <a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>.","ama":"Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>. ; 2018. doi:<a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>","apa":"Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., Lieneke, T., &#38; Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>. <a href=\"https://doi.org/10.1109/itec.2018.8450250\">https://doi.org/10.1109/itec.2018.8450250</a>","bibtex":"@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018, title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine}, DOI={<a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>}, booktitle={2018 IEEE Transportation Electrification Conference and Expo (ITEC)}, author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar}, year={2018} }","mla":"Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>, 2018, doi:<a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>.","short":"S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018."},"date_updated":"2022-01-06T06:56:07Z","author":[{"first_name":"Stefan","full_name":"Urbanek, Stefan","last_name":"Urbanek"},{"first_name":"Bernd","last_name":"Ponick","full_name":"Ponick, Bernd"},{"first_name":"Alexander","last_name":"Taube","full_name":"Taube, Alexander"},{"last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"first_name":"Stefan","id":"13835","full_name":"Lammers, Stefan","last_name":"Lammers"},{"first_name":"Tobias","last_name":"Lieneke","id":"13956","full_name":"Lieneke, Tobias"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"date_created":"2021-09-10T07:14:31Z","title":"Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine","doi":"10.1109/itec.2018.8450250"},{"title":"Trainingsgerät mit Laufbandeinheit","ipn":"DE 10 2017 003 587 A1","applicant":["Universität Paderborn"],"application_number":"102017003587.3","ipc":"A63B 22/02","date_updated":"2022-01-06T06:55:53Z","author":[{"last_name":"Tominski","full_name":"Tominski, Johannes","first_name":"Johannes"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"},{"full_name":"Just, Viktor","last_name":"Just","first_name":"Viktor"},{"full_name":"Lankeit, Christopher","last_name":"Lankeit","first_name":"Christopher"},{"first_name":"Felix","last_name":"Oestersötebier","full_name":"Oestersötebier, Felix"},{"first_name":"Ansgar","last_name":"Trächtler","id":"552","full_name":"Trächtler, Ansgar"}],"date_created":"2021-08-17T07:02:33Z","year":"2018","application_date":"2017-04-12","citation":{"short":"J. Tominski, D. Zimmer, V. Just, C. Lankeit, F. Oestersötebier, A. Trächtler, (2018).","mla":"Tominski, Johannes, et al. <i>Trainingsgerät Mit Laufbandeinheit</i>. 2018.","bibtex":"@article{Tominski_Zimmer_Just_Lankeit_Oestersötebier_Trächtler_2018, title={Trainingsgerät mit Laufbandeinheit}, author={Tominski, Johannes and Zimmer, Detmar and Just, Viktor and Lankeit, Christopher and Oestersötebier, Felix and Trächtler, Ansgar}, year={2018} }","apa":"Tominski, J., Zimmer, D., Just, V., Lankeit, C., Oestersötebier, F., &#38; Trächtler, A. (2018). Trainingsgerät mit Laufbandeinheit.","ama":"Tominski J, Zimmer D, Just V, Lankeit C, Oestersötebier F, Trächtler A. Trainingsgerät mit Laufbandeinheit. 2018.","chicago":"Tominski, Johannes, Detmar Zimmer, Viktor Just, Christopher Lankeit, Felix Oestersötebier, and Ansgar Trächtler. “Trainingsgerät Mit Laufbandeinheit,” 2018.","ieee":"J. Tominski, D. Zimmer, V. Just, C. Lankeit, F. Oestersötebier, and A. Trächtler, “Trainingsgerät mit Laufbandeinheit.” 2018."},"_id":"23419","publication_date":"2018-10-18","department":[{"_id":"146"}],"user_id":"38077","status":"public","type":"patent"},{"publication":"Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250","type":"conference","status":"public","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"user_id":"38077","_id":"22430","language":[{"iso":"eng"}],"citation":{"ama":"Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: <i>Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>. ; 2018.","chicago":"Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In <i>Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>, 2018.","ieee":"S. Urbanek <i>et al.</i>, “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in <i>Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>, 2018.","mla":"Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” <i>Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>, 2018.","short":"S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.","bibtex":"@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018, title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine}, booktitle={Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250}, author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar}, year={2018} }","apa":"Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., … Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In <i>Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>."},"year":"2018","date_created":"2021-06-15T11:10:02Z","author":[{"first_name":"Stefan","last_name":"Urbanek","full_name":"Urbanek, Stefan"},{"full_name":"Ponick, Bernd","last_name":"Ponick","first_name":"Bernd"},{"first_name":"Alexander","last_name":"Taube","full_name":"Taube, Alexander"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"id":"13835","full_name":"Lammers, Stefan","last_name":"Lammers","first_name":"Stefan"},{"full_name":"Lieneke, Tobias","id":"13956","last_name":"Lieneke","first_name":"Tobias"},{"first_name":"Detmar","last_name":"Zimmer","id":"604","full_name":"Zimmer, Detmar"}],"date_updated":"2022-01-06T06:55:32Z","title":"Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine"},{"user_id":"38077","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"_id":"22434","language":[{"iso":"eng"}],"type":"conference","publication":"29th Annual International Solid Freeform Fabrication Symposium","status":"public","abstract":[{"text":"This paper reports on the experimental development and the theoretical analysis of the scanning laser epitaxy (SLE) process that is currently being investigated and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing process for deposition of equiaxed, directionally solidified and single-crystal nickel superalloys onto superalloy substrates through the selective melting and re-solidification of superalloy powders. The thermal modeling of the system, done in a commercial CFD software package, simulates a heat source moving over a powder bed and considers the approximate change in the property values for consolidating CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the melting temperature criteria and the resulting plots are presented alongside matching experimental micrographs obtained through cross-sectional metallography. The influence of the processing parameters on the microstructural evolution, as evidenced through observations made from the micrographs, is discussed. This work is sponsored by the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526.","lang":"eng"}],"date_created":"2021-06-15T11:10:06Z","author":[{"last_name":"Tominski","full_name":"Tominski, Johannes","first_name":"Johannes"},{"first_name":"Stefan","id":"13835","full_name":"Lammers, Stefan","last_name":"Lammers"},{"first_name":"Christian","full_name":"Wulf, Christian","last_name":"Wulf"},{"last_name":"Zimmer","id":"604","full_name":"Zimmer, Detmar","first_name":"Detmar"}],"volume":29,"date_updated":"2022-01-06T06:55:33Z","doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf","title":"Method for a Software-based Design Check of Additively Manufactured Components","citation":{"short":"J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018.","bibtex":"@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based Design Check of Additively Manufactured Components}, volume={29}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>}, booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski, Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018} }","mla":"Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively Manufactured Components.” <i>29th Annual International Solid Freeform Fabrication Symposium</i>, vol. 29, 2018, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.","apa":"Tominski, J., Lammers, S., Wulf, C., &#38; Zimmer, D. (2018). Method for a Software-based Design Check of Additively Manufactured Components. In <i>29th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 29). <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>","chicago":"Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer. “Method for a Software-Based Design Check of Additively Manufactured Components.” In <i>29th Annual International Solid Freeform Fabrication Symposium</i>, Vol. 29, 2018. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.","ieee":"J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in <i>29th Annual International Solid Freeform Fabrication Symposium</i>, 2018, vol. 29.","ama":"Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design Check of Additively Manufactured Components. In: <i>29th Annual International Solid Freeform Fabrication Symposium</i>. Vol 29. ; 2018. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>"},"intvolume":"        29","year":"2018"},{"doi":"10.3139/9783446458123.008","title":"Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren","date_created":"2021-06-15T11:10:08Z","author":[{"first_name":"Thomas","last_name":"Künneke","id":"13226","full_name":"Künneke, Thomas"},{"last_name":"Bücker","full_name":"Bücker, Sonja","first_name":"Sonja"},{"first_name":"Tobias","last_name":"Lieneke","id":"13956","full_name":"Lieneke, Tobias"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"date_updated":"2022-01-06T06:55:33Z","publisher":"Carl Hanser Verlag GmbH & Co. KG","citation":{"ama":"Künneke T, Bücker S, Lieneke T, Zimmer D. Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In: <i>Proceedings of the 15th Rapid.Tech Conference</i>. Carl Hanser Verlag GmbH &#38; Co. KG; 2018:128-143. doi:<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>","ieee":"T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in <i>Proceedings of the 15th Rapid.Tech Conference</i>, 2018, pp. 128–143.","chicago":"Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” In <i>Proceedings of the 15th Rapid.Tech Conference</i>, 128–43. Carl Hanser Verlag GmbH &#38; Co. KG, 2018. <a href=\"https://doi.org/10.3139/9783446458123.008\">https://doi.org/10.3139/9783446458123.008</a>.","apa":"Künneke, T., Bücker, S., Lieneke, T., &#38; Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In <i>Proceedings of the 15th Rapid.Tech Conference</i> (pp. 128–143). Carl Hanser Verlag GmbH &#38; Co. KG. <a href=\"https://doi.org/10.3139/9783446458123.008\">https://doi.org/10.3139/9783446458123.008</a>","bibtex":"@inproceedings{Künneke_Bücker_Lieneke_Zimmer_2018, title={Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren}, DOI={<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>}, booktitle={Proceedings of the 15th Rapid.Tech Conference}, publisher={Carl Hanser Verlag GmbH &#38; Co. KG}, author={Künneke, Thomas and Bücker, Sonja and Lieneke, Tobias and Zimmer, Detmar}, year={2018}, pages={128–143} }","mla":"Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” <i>Proceedings of the 15th Rapid.Tech Conference</i>, Carl Hanser Verlag GmbH &#38; Co. KG, 2018, pp. 128–43, doi:<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>.","short":"T. Künneke, S. Bücker, T. Lieneke, D. Zimmer, in: Proceedings of the 15th Rapid.Tech Conference, Carl Hanser Verlag GmbH &#38; Co. KG, 2018, pp. 128–143."},"page":"128-143","year":"2018","publication_identifier":{"isbn":["978-3-446-45812-3"]},"language":[{"iso":"eng"}],"user_id":"38077","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"_id":"22435","status":"public","abstract":[{"lang":"eng","text":"In der Industrie entsteht aufgrund des dynamischen Wettbewerbsumfelds ein zunehmender Drang nach verkürzten Produktentstehungszeiten, hoher Funktionsintegration und individualisierten Produkten. Mithin erlangen additive Fertigungsverfahren eine zunehmende industrielle Bedeutung. Das Laser-Strahlschmelzen (LBM) als additives Verfahren ist hierbei beispielhaft hervorzuheben, da es bereits im Bereich des Prototypenbaus und der Kleinserienfertigung ein etabliertes Verfahren ist, das an der Schwelle zum Einsatz in der Serienproduktion steht. Entscheidendes Hemmnis für den Einsatz der additiven Fertigungsverfahren bildet die fehlende methodische Ausnutzung der gestalterischen Freiheiten und Randbedingungen durch die vergleichsweise neuartige Gruppe an Fertigungsverfahren im gesamten Produktentstehungsprozess. In der Produktentwicklung bildet die Konstruktionsmethodik einen möglichen Ansatz, um gestalterische Freiheiten und Vorteile additiver Fertigungsverfahren bereits in frühen Phasen der Entwicklung gezielt zu berücksichtigen. Hierfür werden aufgrund bestehender und allgemein anerkannter Konstruktionsmethoden (z.B. VDI2221, Pahl/Beitz, etc.) Anknüpfungspunkte aufgezeigt, die eine Implementierung, speziell des Laser-Strahlschmelzens, ermöglichen. Besonderes Augenmerk wird in dieser Veröffentlichung auf die beiden Konstruktionsphasen Konzeption und Gestaltung gelegt. Hierzu werden Ergänzungen oder Anpassungen der bestehenden Konstruktionsmethoden vorgestellt. In besonderer Weise wird dabei auf die Einbringung und die Vorteile der additiven Fertigungsverfahren eingegangen."}],"type":"conference","publication":"Proceedings of the 15th Rapid.Tech Conference"},{"abstract":[{"text":"Die Additive Fertigung eröffnet neue Freiheitsgrade in der Produktentwicklung. Unsicherheiten über die Wirtschaftlichkeit und Leistungsfähigkeit der aus der Konstruktion ableitbaren Fertigungstechnologieketten sind zu beachten. In diesem Beitrag wird eine Methode vorgestellt, welche die Anpassung einer bestehenden Konstruktionsmethode berücksichtigt und eine iterative Bewertung der Konstruktionsentscheidungen anhand von Technologieketten ermöglicht. Hiermit können die Potenziale der additiven Fertigungstechnologien zielgerichtet realisiert werden.","lang":"eng"}],"status":"public","publication":"ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb","type":"journal_article","language":[{"iso":"eng"}],"_id":"22436","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"user_id":"38077","year":"2018","intvolume":"       113","page":"742-745","citation":{"ieee":"A. Jacob <i>et al.</i>, “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” <i>ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>, vol. 113, no. 11, pp. 742–745, 2018.","chicago":"Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i> 113, no. 11 (2018): 742–45. <a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>.","ama":"Jacob A, Künneke T, Lieneke T, et al. Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. <i>ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>. 2018;113(11):742-745. doi:<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>","mla":"Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i>, vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>.","bibtex":"@article{Jacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title={Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung}, volume={113}, DOI={<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>}, number={11}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Carl Hanser Verlag}, author={Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela}, year={2018}, pages={742–745} }","short":"A. Jacob, T. Künneke, T. Lieneke, T. Baumann, N. Stricker, D. Zimmer, G. Lanza, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113 (2018) 742–745.","apa":"Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., &#38; Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i>, <i>113</i>(11), 742–745. <a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>"},"issue":"11","title":"Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung","doi":"https://doi.org/10.3139/104.112005","date_updated":"2022-01-06T06:55:33Z","publisher":"Carl Hanser Verlag","volume":113,"author":[{"first_name":"Alexander","full_name":"Jacob, Alexander","last_name":"Jacob"},{"last_name":"Künneke","full_name":"Künneke, Thomas","id":"13226","first_name":"Thomas"},{"last_name":"Lieneke","id":"13956","full_name":"Lieneke, Tobias","first_name":"Tobias"},{"first_name":"Tobias","last_name":"Baumann","full_name":"Baumann, Tobias"},{"full_name":"Stricker, Nicole","last_name":"Stricker","first_name":"Nicole"},{"id":"604","full_name":"Zimmer, Detmar","last_name":"Zimmer","first_name":"Detmar"},{"full_name":"Lanza, Gisela","last_name":"Lanza","first_name":"Gisela"}],"date_created":"2021-06-15T11:10:09Z"},{"language":[{"iso":"eng"}],"user_id":"38077","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"_id":"22506","status":"public","type":"book","doi":"10.3139/9783446456198.009","title":"Elektromechanische Antriebe","author":[{"first_name":"Uwe","full_name":"Brückner, Uwe","last_name":"Brückner"},{"last_name":"Künneke","id":"13226","full_name":"Künneke, Thomas","first_name":"Thomas"},{"first_name":"Magnus Hubert","id":"11904","full_name":"Schadomsky, Magnus Hubert","last_name":"Schadomsky"},{"last_name":"Strop","full_name":"Strop, Malte","first_name":"Malte"},{"first_name":"Detmar","full_name":"Zimmer, Detmar","id":"604","last_name":"Zimmer"}],"date_created":"2021-06-22T13:31:43Z","publisher":"Carl Hanser Verlag","date_updated":"2022-01-06T06:55:35Z","citation":{"mla":"Brückner, Uwe, et al. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018, pp. 247–90, doi:<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>.","short":"U. Brückner, T. Künneke, M.H. Schadomsky, M. Strop, D. Zimmer, Elektromechanische Antriebe, Carl Hanser Verlag, 2018.","bibtex":"@book{Brückner_Künneke_Schadomsky_Strop_Zimmer_2018, title={Elektromechanische Antriebe}, DOI={<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>}, publisher={Carl Hanser Verlag}, author={Brückner, Uwe and Künneke, Thomas and Schadomsky, Magnus Hubert and Strop, Malte and Zimmer, Detmar}, year={2018}, pages={247–290} }","apa":"Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., &#38; Zimmer, D. (2018). <i>Elektromechanische Antriebe</i> (pp. 247–290). Carl Hanser Verlag. <a href=\"https://doi.org/10.3139/9783446456198.009\">https://doi.org/10.3139/9783446456198.009</a>","ama":"Brückner U, Künneke T, Schadomsky MH, Strop M, Zimmer D. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag; 2018:247-290. doi:<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>","chicago":"Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and Detmar Zimmer. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018. <a href=\"https://doi.org/10.3139/9783446456198.009\">https://doi.org/10.3139/9783446456198.009</a>.","ieee":"U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018, pp. 247–290."},"page":"247-290","year":"2018","publication_identifier":{"isbn":["978-3-446-45619-8"]}},{"language":[{"iso":"eng"}],"user_id":"70729","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"146"},{"_id":"321"},{"_id":"9"}],"_id":"22034","status":"public","type":"journal_article","publication":"Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe","title":"Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen","author":[{"full_name":"Knoop, F.","last_name":"Knoop","first_name":"F."},{"full_name":"Köhler, M.","last_name":"Köhler","first_name":"M."},{"first_name":"Tobias","full_name":"Lieneke, Tobias","id":"13956","last_name":"Lieneke"},{"first_name":"Detmar","id":"604","full_name":"Zimmer, Detmar","last_name":"Zimmer"},{"last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530","first_name":"Volker"}],"date_created":"2021-05-07T13:23:15Z","volume":10,"date_updated":"2022-01-06T06:55:23Z","publisher":"VDI Fachmedien GmbH & Co. KG","citation":{"mla":"Knoop, F., et al. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” <i>Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe</i>, vol. 10, VDI Fachmedien GmbH &#38; Co. KG, 2018, pp. 83–88.","bibtex":"@article{Knoop_Köhler_Lieneke_Zimmer_Schöppner_2018, title={Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen}, volume={10}, journal={Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe}, publisher={VDI Fachmedien GmbH &#38; Co. KG}, author={Knoop, F. and Köhler, M. and Lieneke, Tobias and Zimmer, Detmar and Schöppner, Volker}, year={2018}, pages={83–88} }","short":"F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, V. Schöppner, Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018) 83–88.","apa":"Knoop, F., Köhler, M., Lieneke, T., Zimmer, D., &#38; Schöppner, V. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. <i>Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe</i>, <i>10</i>, 83–88.","ama":"Knoop F, Köhler M, Lieneke T, Zimmer D, Schöppner V. Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>. 2018;10:83-88.","chicago":"Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” <i>Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe</i> 10 (2018): 83–88.","ieee":"F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>, vol. 10, pp. 83–88, 2018."},"page":"83-88","intvolume":"        10","year":"2018","publication_identifier":{"issn":["07205953"]}},{"language":[{"iso":"eng"}],"user_id":"70729","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"146"},{"_id":"321"},{"_id":"9"}],"_id":"22035","status":"public","type":"journal_article","publication":"Kunststoffe","doi":"https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf","title":"Additive Fertigung nach Maß","date_created":"2021-05-07T13:23:16Z","author":[{"first_name":"F.","full_name":"Knoop, F.","last_name":"Knoop"},{"last_name":"Lieneke","full_name":"Lieneke, Tobias","id":"13956","first_name":"Tobias"},{"first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530"},{"last_name":"Zimmer","id":"604","full_name":"Zimmer, Detmar","first_name":"Detmar"}],"volume":6,"date_updated":"2022-01-06T06:55:23Z","citation":{"ama":"Knoop F, Lieneke T, Schöppner V, Zimmer D. Additive Fertigung nach Maß. <i>Kunststoffe</i>. 2018;6:70-73. doi:<a href=\"https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf\">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>","chicago":"Knoop, F., Tobias Lieneke, Volker Schöppner, and Detmar Zimmer. “Additive Fertigung Nach Maß.” <i>Kunststoffe</i> 6 (2018): 70–73. <a href=\"https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf\">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>.","ieee":"F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” <i>Kunststoffe</i>, vol. 6, pp. 70–73, 2018, doi: <a href=\"https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf\">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>.","apa":"Knoop, F., Lieneke, T., Schöppner, V., &#38; Zimmer, D. (2018). Additive Fertigung nach Maß. <i>Kunststoffe</i>, <i>6</i>, 70–73. <a href=\"https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf\">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>","mla":"Knoop, F., et al. “Additive Fertigung Nach Maß.” <i>Kunststoffe</i>, vol. 6, 2018, pp. 70–73, doi:<a href=\"https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf\">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>.","short":"F. Knoop, T. Lieneke, V. Schöppner, D. Zimmer, Kunststoffe 6 (2018) 70–73.","bibtex":"@article{Knoop_Lieneke_Schöppner_Zimmer_2018, title={Additive Fertigung nach Maß}, volume={6}, DOI={<a href=\"https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf\">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>}, journal={Kunststoffe}, author={Knoop, F. and Lieneke, Tobias and Schöppner, Volker and Zimmer, Detmar}, year={2018}, pages={70–73} }"},"intvolume":"         6","page":"70-73","year":"2018","publication_identifier":{"issn":["0023-5563"]}},{"quality_controlled":"1","publication_identifier":{"isbn":["0373-3300"]},"citation":{"ieee":"M. Schadomsky, D. Zimmer, and C. Neumann, “Energieeffiziente Federkraftbremse,” <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>, pp. 73–82, 2018, doi: <a href=\"https://doi.org/10.37544/0720-5953-2018-09-73\">https://doi.org/10.37544/0720-5953-2018-09-73</a>.","chicago":"Schadomsky, Magnus, Detmar Zimmer, and Christian Neumann. “Energieeffiziente Federkraftbremse.” <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>, 2018, 73–82. <a href=\"https://doi.org/10.37544/0720-5953-2018-09-73\">https://doi.org/10.37544/0720-5953-2018-09-73</a>.","ama":"Schadomsky M, Zimmer D, Neumann C. Energieeffiziente Federkraftbremse. <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>. Published online 2018:73-82. doi:<a href=\"https://doi.org/10.37544/0720-5953-2018-09-73\">https://doi.org/10.37544/0720-5953-2018-09-73</a>","mla":"Schadomsky, Magnus, et al. “Energieeffiziente Federkraftbremse.” <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>, Springer-VDI-Verlag , 2018, pp. 73–82, doi:<a href=\"https://doi.org/10.37544/0720-5953-2018-09-73\">https://doi.org/10.37544/0720-5953-2018-09-73</a>.","bibtex":"@article{Schadomsky_Zimmer_Neumann_2018, title={Energieeffiziente Federkraftbremse}, DOI={<a href=\"https://doi.org/10.37544/0720-5953-2018-09-73\">https://doi.org/10.37544/0720-5953-2018-09-73</a>}, journal={Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe}, publisher={Springer-VDI-Verlag }, author={Schadomsky, Magnus and Zimmer, Detmar and Neumann, Christian}, year={2018}, pages={73–82} }","short":"M. Schadomsky, D. Zimmer, C. Neumann, Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe (2018) 73–82.","apa":"Schadomsky, M., Zimmer, D., &#38; Neumann, C. (2018). Energieeffiziente Federkraftbremse. <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>, 73–82. <a href=\"https://doi.org/10.37544/0720-5953-2018-09-73\">https://doi.org/10.37544/0720-5953-2018-09-73</a>"},"page":"73-82","year":"2018","date_created":"2021-06-15T11:10:13Z","author":[{"first_name":"Magnus","last_name":"Schadomsky","id":"11904","full_name":"Schadomsky, Magnus"},{"first_name":"Detmar","last_name":"Zimmer","id":"604","full_name":"Zimmer, Detmar"},{"full_name":"Neumann, Christian","last_name":"Neumann","first_name":"Christian"}],"date_updated":"2022-10-05T14:07:02Z","publisher":"Springer-VDI-Verlag ","doi":"https://doi.org/10.37544/0720-5953-2018-09-73","title":"Energieeffiziente Federkraftbremse","type":"journal_article","publication":"Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe","status":"public","abstract":[{"text":"Die Federkraftbremse ist eine in der elektromechanischen Antriebstechnik häufig eingesetzte Komponente. Ihre Hauptaufgabe besteht darin, bewegliche Lasten im Stillstand zu halten, sowie bei Stromausfall automatisch einen Notstopp einzuleiten. Das Öffnen und Offenhalten der Federkraftbremse erfolgt elektromagnetisch; das Schließen wird durch Druckfedern realisiert. Aufgrund der Kennlinie des Elektromagneten bietet sich hinsichtlich der Energieeffizienz ein nennenswertes Optimierungspotential. Der vorliegende Beitrag beschreibt die systematische Entwicklung eines Funktionsmusters, das bei ähnlichen Stückkosten und geringerem Materialeinsatz insbesondere für die Funktion „Halten“ eine signifikante Reduzierung des Energiebedarfs erreicht.","lang":"ger"}],"user_id":"11904","department":[{"_id":"9"},{"_id":"146"}],"_id":"22440","language":[{"iso":"ger"}],"article_type":"original","keyword":["Federkraftbremse","Energieeffizienz"]},{"publication":"2018 IEEE Transportation Electrification Conference and Expo (ITEC)","type":"conference","status":"public","department":[{"_id":"9"},{"_id":"158"},{"_id":"146"}],"user_id":"13956","_id":"41526","language":[{"iso":"eng"}],"quality_controlled":"1","publication_status":"published","citation":{"ama":"Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>. IEEE; 2018. doi:<a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>","chicago":"Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>. IEEE, 2018. <a href=\"https://doi.org/10.1109/itec.2018.8450250\">https://doi.org/10.1109/itec.2018.8450250</a>.","ieee":"S. Urbanek <i>et al.</i>, “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: <a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>.","apa":"Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., Lieneke, T., &#38; Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>. <a href=\"https://doi.org/10.1109/itec.2018.8450250\">https://doi.org/10.1109/itec.2018.8450250</a>","short":"S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018.","bibtex":"@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018, title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine}, DOI={<a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>}, booktitle={2018 IEEE Transportation Electrification Conference and Expo (ITEC)}, publisher={IEEE}, author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar}, year={2018} }","mla":"Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” <i>2018 IEEE Transportation Electrification Conference and Expo (ITEC)</i>, IEEE, 2018, doi:<a href=\"https://doi.org/10.1109/itec.2018.8450250\">10.1109/itec.2018.8450250</a>."},"year":"2018","date_created":"2023-02-02T14:45:45Z","author":[{"full_name":"Urbanek, Stefan","last_name":"Urbanek","first_name":"Stefan"},{"full_name":"Ponick, Bernd","last_name":"Ponick","first_name":"Bernd"},{"last_name":"Taube","full_name":"Taube, Alexander","first_name":"Alexander"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"},{"first_name":"Stefan","full_name":"Lammers, Stefan","id":"13835","last_name":"Lammers"},{"first_name":"Tobias","last_name":"Lieneke","id":"13956","full_name":"Lieneke, Tobias"},{"first_name":"Detmar","full_name":"Zimmer, Detmar","id":"604","last_name":"Zimmer"}],"publisher":"IEEE","date_updated":"2024-03-27T15:27:12Z","doi":"10.1109/itec.2018.8450250","title":"Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine"},{"publication_identifier":{"issn":["0720-5953"]},"page":"83-88","citation":{"ama":"Schöppner V, Knoop F, Köhler M, Lieneke T, Zimmer D. Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. <i>Konstruktion</i>. 2018;70. Jg. Heft 10:83-88.","ieee":"V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, and D. Zimmer, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” <i>Konstruktion</i>, vol. 70. Jg. Heft 10, pp. 83–88, 2018.","chicago":"Schöppner, Volker, F. Knoop, M. Köhler, Tobias Lieneke, and Detmar Zimmer. “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.” <i>Konstruktion</i> 70. Jg. Heft 10 (2018): 83–88.","apa":"Schöppner, V., Knoop, F., Köhler, M., Lieneke, T., &#38; Zimmer, D. (2018). Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen. <i>Konstruktion</i>, <i>70. Jg. Heft 10</i>, 83–88.","mla":"Schöppner, Volker, et al. “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.” <i>Konstruktion</i>, vol. 70. Jg. Heft 10, 2018, pp. 83–88.","short":"V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, Konstruktion 70. Jg. Heft 10 (2018) 83–88.","bibtex":"@article{Schöppner_Knoop_Köhler_Lieneke_Zimmer_2018, title={Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen}, volume={70. Jg. Heft 10}, journal={Konstruktion}, author={Schöppner, Volker and Knoop, F. and Köhler, M. and Lieneke, Tobias and Zimmer, Detmar}, year={2018}, pages={83–88} }"},"year":"2018","volume":"70. Jg. Heft 10","date_created":"2021-10-27T10:00:01Z","author":[{"last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530","first_name":"Volker"},{"last_name":"Knoop","full_name":"Knoop, F.","first_name":"F."},{"full_name":"Köhler, M.","last_name":"Köhler","first_name":"M."},{"last_name":"Lieneke","full_name":"Lieneke, Tobias","id":"13956","first_name":"Tobias"},{"first_name":"Detmar","last_name":"Zimmer","id":"604","full_name":"Zimmer, Detmar"}],"date_updated":"2024-03-27T15:27:39Z","title":"Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen","publication":"Konstruktion","type":"journal_article","status":"public","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"},{"_id":"146"}],"user_id":"13956","_id":"26943","language":[{"iso":"ger"}]},{"title":"Additive Fertigung nach Maß","volume":"108. Jg. Heft 6","date_created":"2021-10-27T09:27:01Z","author":[{"first_name":"Volker","last_name":"Schöppner","id":"20530","full_name":"Schöppner, Volker"},{"id":"604","full_name":"Zimmer, Detmar","last_name":"Zimmer","first_name":"Detmar"},{"last_name":"Knoop","full_name":"Knoop, Frederick","first_name":"Frederick"},{"first_name":"Tobias","last_name":"Lieneke","id":"13956","full_name":"Lieneke, Tobias"}],"date_updated":"2024-03-27T15:27:55Z","citation":{"ama":"Schöppner V, Zimmer D, Knoop F, Lieneke T. Additive Fertigung nach Maß. <i>Kunststoffe</i>. 2018;108. Jg. Heft 6.","ieee":"V. Schöppner, D. Zimmer, F. Knoop, and T. Lieneke, “Additive Fertigung nach Maß,” <i>Kunststoffe</i>, vol. 108. Jg. Heft 6, 2018.","chicago":"Schöppner, Volker, Detmar Zimmer, Frederick Knoop, and Tobias Lieneke. “Additive Fertigung nach Maß.” <i>Kunststoffe</i> 108. Jg. Heft 6 (2018).","bibtex":"@article{Schöppner_Zimmer_Knoop_Lieneke_2018, title={Additive Fertigung nach Maß}, volume={108. Jg. Heft 6}, journal={Kunststoffe}, author={Schöppner, Volker and Zimmer, Detmar and Knoop, Frederick and Lieneke, Tobias}, year={2018} }","mla":"Schöppner, Volker, et al. “Additive Fertigung nach Maß.” <i>Kunststoffe</i>, vol. 108. Jg. Heft 6, 2018.","short":"V. Schöppner, D. Zimmer, F. Knoop, T. Lieneke, Kunststoffe 108. Jg. Heft 6 (2018).","apa":"Schöppner, V., Zimmer, D., Knoop, F., &#38; Lieneke, T. (2018). Additive Fertigung nach Maß. <i>Kunststoffe</i>, <i>108. Jg. Heft 6</i>."},"year":"2018","publication_identifier":{"unknown":["0023-5563"]},"language":[{"iso":"ger"}],"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"},{"_id":"146"}],"user_id":"13956","_id":"26930","status":"public","publication":"Kunststoffe","type":"journal_article"},{"date_created":"2021-06-15T11:10:11Z","author":[{"first_name":"Stefan","last_name":"Lammers","full_name":"Lammers, Stefan","id":"13835"},{"full_name":"Tominski, Johannes","last_name":"Tominski","first_name":"Johannes"},{"first_name":"Sebastian","full_name":"Magerkohl, Sebastian","id":"28520","last_name":"Magerkohl"},{"last_name":"Künneke","id":"13226","full_name":"Künneke, Thomas","first_name":"Thomas"},{"last_name":"Lieneke","full_name":"Lieneke, Tobias","id":"13956","first_name":"Tobias"},{"first_name":"Detmar","id":"604","full_name":"Zimmer, Detmar","last_name":"Zimmer"}],"date_updated":"2023-05-04T07:26:09Z","doi":"https://doi.org/10.3139/9783446458123.005","title":"Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung","publication_identifier":{"isbn":["978-3-446-45812-3"]},"quality_controlled":"1","page":"81-94","citation":{"mla":"Lammers, Stefan, et al. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” <i>Proceedings of the 15th Rapid.Tech Conference</i>, 2018, pp. 81–94, doi:<a href=\"https://doi.org/10.3139/9783446458123.005\">https://doi.org/10.3139/9783446458123.005</a>.","bibtex":"@inproceedings{Lammers_Tominski_Magerkohl_Künneke_Lieneke_Zimmer_2018, title={Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung}, DOI={<a href=\"https://doi.org/10.3139/9783446458123.005\">https://doi.org/10.3139/9783446458123.005</a>}, booktitle={Proceedings of the 15th Rapid.Tech Conference}, author={Lammers, Stefan and Tominski, Johannes and Magerkohl, Sebastian and Künneke, Thomas and Lieneke, Tobias and Zimmer, Detmar}, year={2018}, pages={81–94} }","short":"S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, D. Zimmer, in: Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 81–94.","apa":"Lammers, S., Tominski, J., Magerkohl, S., Künneke, T., Lieneke, T., &#38; Zimmer, D. (2018). Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung. <i>Proceedings of the 15th Rapid.Tech Conference</i>, 81–94. <a href=\"https://doi.org/10.3139/9783446458123.005\">https://doi.org/10.3139/9783446458123.005</a>","ama":"Lammers S, Tominski J, Magerkohl S, Künneke T, Lieneke T, Zimmer D. Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung. In: <i>Proceedings of the 15th Rapid.Tech Conference</i>. ; 2018:81-94. doi:<a href=\"https://doi.org/10.3139/9783446458123.005\">https://doi.org/10.3139/9783446458123.005</a>","chicago":"Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Thomas Künneke, Tobias Lieneke, and Detmar Zimmer. “Konstruktionsrichtlinien Für Eine Softwaregestützte Anpassung von Additiv Gefertigten Bauteilen Im Hinblick Auf Eine Robuste Fertigung.” In <i>Proceedings of the 15th Rapid.Tech Conference</i>, 81–94, 2018. <a href=\"https://doi.org/10.3139/9783446458123.005\">https://doi.org/10.3139/9783446458123.005</a>.","ieee":"S. Lammers, J. Tominski, S. Magerkohl, T. Künneke, T. Lieneke, and D. Zimmer, “Konstruktionsrichtlinien für eine softwaregestützte Anpassung von additiv gefertigten Bauteilen im Hinblick auf eine robuste Fertigung,” in <i>Proceedings of the 15th Rapid.Tech Conference</i>, 2018, pp. 81–94, doi: <a href=\"https://doi.org/10.3139/9783446458123.005\">https://doi.org/10.3139/9783446458123.005</a>."},"year":"2018","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"user_id":"13835","_id":"22438","language":[{"iso":"eng"}],"publication":"Proceedings of the 15th Rapid.Tech Conference","type":"conference","status":"public","abstract":[{"text":"Neue Konstruktionsabläufe und Potentiale bei der Gestaltung additiv hergestellter Bauteile verlangen insbesondere im Konstruktionsprozess ein Umdenken. Fehlende Kenntnisse über die additive Fertigungstechnologie hemmen zusätzlich dieses Umdenken [HHD06, WC15]. Um die verhältnismäßig neue Fertigungstechnologie zugänglicher zu machen, wurden in den letzten Jahren verschiedene Konstruktionsempfehlungen erarbeitet. Die Vielzahl an Empfehlungen erschwert dem Konstrukteur allerdings einen entsprechenden Überblick zu behalten und für ihn relevante von nicht relevanten Empfehlungen zu sondieren. Aus diesem Grund wurden öffentlich zugängliche Empfehlungen für das Laser-Strahlschmelzen zusammengetragen und einer Priorisierung unterzogen. Das Ergebnis beinhaltet Konstruktionsempfehlungen, die einen relevanten Einfluss auf die Bauteilfertigung, die Bauteilqualität und -funktion haben. Durch Abstraktion dieser Empfehlungen konnten Richtlinien erarbeitet werden, die für eine softwareseitige Gestaltprüfung verwendet werden können. Durch diese Gestaltprüfung können Bauteile beliebiger Komplexität, zum Beispiel feine Gitter oder topologieoptimierte Strukturen, bereits vor der Fertigung hinsichtlich der Einhaltung relevanter Konstruktionsrichtlinien überprüft werden. Der Gestaltprüfer greift dabei auf eine Datenbank zurück, die zulässige, quantitative Grenzwerte von Konstruktionsrichtlinien enthält. Diese Grenzwerte werden im Folgenden Attributsausprägungen genannt und können experimentell ermittelt werden. Hierfür wurden standardisierte Prüfkörperbaujobs entwickelt, die alle notwendigen Prüfkörper zur Ermittlung der Attributsausprägungen enthalten und deren Auswertung eine Erweiterung der Datenbank hinsichtlich","lang":"eng"}]},{"author":[{"id":"13835","full_name":"Lammers, Stefan","last_name":"Lammers","first_name":"Stefan"},{"full_name":"Tominski, Johannes","last_name":"Tominski","first_name":"Johannes"},{"last_name":"Magerkohl","full_name":"Magerkohl, Sebastian","id":"28520","first_name":"Sebastian"},{"last_name":"Lieneke","id":"13956","full_name":"Lieneke, Tobias","first_name":"Tobias"},{"last_name":"Künneke","id":"13226","full_name":"Künneke, Thomas","first_name":"Thomas"},{"first_name":"Detmar","last_name":"Zimmer","id":"604","full_name":"Zimmer, Detmar"}],"date_created":"2021-06-15T11:10:03Z","volume":29,"date_updated":"2023-05-04T07:27:40Z","doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf","title":"Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production","quality_controlled":"1","citation":{"ama":"Lammers S, Tominski J, Magerkohl S, Lieneke T, Künneke T, Zimmer D. Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production. In: <i>29th Annual International Solid Freeform Fabrication Symposium</i>. Vol 29. ; 2018. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf</a>","ieee":"S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, and D. Zimmer, “Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production,” in <i>29th Annual International Solid Freeform Fabrication Symposium</i>, 2018, vol. 29, doi: <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf</a>.","chicago":"Lammers, Stefan, Johannes Tominski, Sebastian Magerkohl, Tobias Lieneke, Thomas Künneke, and Detmar Zimmer. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” In <i>29th Annual International Solid Freeform Fabrication Symposium</i>, Vol. 29, 2018. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf</a>.","apa":"Lammers, S., Tominski, J., Magerkohl, S., Lieneke, T., Künneke, T., &#38; Zimmer, D. (2018). Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production. <i>29th Annual International Solid Freeform Fabrication Symposium</i>, <i>29</i>. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf</a>","bibtex":"@inproceedings{Lammers_Tominski_Magerkohl_Lieneke_Künneke_Zimmer_2018, title={Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production}, volume={29}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf</a>}, booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Lammers, Stefan and Tominski, Johannes and Magerkohl, Sebastian and Lieneke, Tobias and Künneke, Thomas and Zimmer, Detmar}, year={2018} }","short":"S. Lammers, J. Tominski, S. Magerkohl, T. Lieneke, T. Künneke, D. Zimmer, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018.","mla":"Lammers, Stefan, et al. “Design Guidelines for a Software-Supported Adaptation of Additively Manufactured Components with Regard to a Robust Production.” <i>29th Annual International Solid Freeform Fabrication Symposium</i>, vol. 29, 2018, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf</a>."},"intvolume":"        29","year":"2018","user_id":"13835","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"_id":"22431","language":[{"iso":"eng"}],"type":"conference","publication":"29th Annual International Solid Freeform Fabrication Symposium","status":"public","abstract":[{"lang":"eng","text":"The design of additively manufactured components requires a rethinking in the design process. This is inhibited by a lack of knowledge about additive manufacturing technologies. For this reason, a large number of design guidelines have been developed in recent years. In their present form the design guidelines are not suitable for processing in a software algorithm, since the guidelines have a certain redundancy and partly influence each other. This paper describes several steps to consolidate the existing guidelines and to prepare them in a way that they can be used in a software algorithm for a design check. Therefore, existing guidelines are collected, prioritized and quantified with regard to their relevance for a robust production. To quantify the guidelines, test specimens are developed, produced and evaluated in order to obtain a limit value for the geometric properties. With these limit values, quantifiable design guidelines can be applied to designers and software tools."}]},{"type":"book","status":"public","abstract":[{"text":"Schwingungen und Vibrationen sind in Technik und Alltag häufig anzutreffen. Meist sind sie unerwünscht und müssen durch Dämpfung reduziert werden. Hierzu werden aktuell häufig zusätzlich zu montierende Dämpfungselemente eingesetzt. Diese sind durch zusätzlichen Montageaufwand und erhöhte Kosten gekennzeichnet. Durch die zusätzliche Masse wird Leichtbauansätzen widersprochen. Additive Fertigungsverfahren bieten große Freiheiten in der Bauteilgestaltung. Dies ermöglicht ein hohes Maß an Funktionsintegration. So ergeben sich auch im Bereich der Schwingungsdämpfung Möglichkeiten zur gezielten Integration von Dämpfungsfunktionen durch die Eigenschaften der additiven Fertigungsverfahren. Mittels der pulverbasierten Verfahren kann disperses Stützmaterial innerhalb von Hohlräumen in der Struktur belassen werden. Dieses Pulvermaterial kann als Partikeldämpfer fungieren. Durch die Freiheiten in der Bauteilgestalt kann die Dämpfungswirkung über die geometrischen Merkmale der Hohlräume gezielt eingestellt werden. Im Rahmen dieses Beitrags werden speziell Untersuchungen zur Dämpfungswirkung additiv gefertigter Bauteile bei freien Biegeschwingungen betrachtet. Die praxisnahe Umsetzung zur Funktionsintegration von Dämpfungsstrukturen erfolgt am Beispiel der Ankerscheibe einer Federkraftbremse. Hier kann durch die additive Fertigung verbunden mit der Funktionsintegration von Partikeldämpfern eine Reduzierung der Schallabstrahlung für den Schaltvorgang der Bremse erreicht werden.","lang":"eng"}],"department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"user_id":"38077","_id":"22419","language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-3-658-17780-5"]},"page":"61-74","citation":{"bibtex":"@book{Künneke_Zimmer_2017, title={Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen}, DOI={<a href=\"https://doi.org/10.1007/978-3-658-17780-5\">10.1007/978-3-658-17780-5</a>}, publisher={Springer Fachmedien Wiesbaden GmbH}, author={Künneke, Thomas and Zimmer, Detmar}, year={2017}, pages={61–74} }","mla":"Künneke, Thomas, and Detmar Zimmer. <i>Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen</i>. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74, doi:<a href=\"https://doi.org/10.1007/978-3-658-17780-5\">10.1007/978-3-658-17780-5</a>.","short":"T. Künneke, D. Zimmer, Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen, Springer Fachmedien Wiesbaden GmbH, 2017.","apa":"Künneke, T., &#38; Zimmer, D. (2017). <i>Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen</i> (pp. 61–74). Springer Fachmedien Wiesbaden GmbH. <a href=\"https://doi.org/10.1007/978-3-658-17780-5\">https://doi.org/10.1007/978-3-658-17780-5</a>","ama":"Künneke T, Zimmer D. <i>Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen</i>. Springer Fachmedien Wiesbaden GmbH; 2017:61-74. doi:<a href=\"https://doi.org/10.1007/978-3-658-17780-5\">10.1007/978-3-658-17780-5</a>","chicago":"Künneke, Thomas, and Detmar Zimmer. <i>Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen</i>. Springer Fachmedien Wiesbaden GmbH, 2017. <a href=\"https://doi.org/10.1007/978-3-658-17780-5\">https://doi.org/10.1007/978-3-658-17780-5</a>.","ieee":"T. Künneke and D. Zimmer, <i>Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen</i>. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74."},"year":"2017","date_created":"2021-06-15T11:09:49Z","author":[{"first_name":"Thomas","last_name":"Künneke","id":"13226","full_name":"Künneke, Thomas"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"publisher":"Springer Fachmedien Wiesbaden GmbH","date_updated":"2022-01-06T06:55:32Z","doi":"10.1007/978-3-658-17780-5","title":"Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen"},{"title":"Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine","doi":"10.3139/9783446454606.006","date_updated":"2022-01-06T06:55:32Z","publisher":"Hanser Verlag","author":[{"first_name":"Stefan","last_name":"Lammers","full_name":"Lammers, Stefan","id":"13835"},{"full_name":"Quattrone, Francesco","last_name":"Quattrone","first_name":"Francesco"},{"first_name":"Rafael","full_name":"Mrozek, Rafael","last_name":"Mrozek"},{"last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604","first_name":"Detmar"},{"full_name":"Schmid, Hans-Joachim","last_name":"Schmid","first_name":"Hans-Joachim"},{"first_name":"Bernd","full_name":"Ponick, Bernd","last_name":"Ponick"},{"last_name":"Hoffmann","full_name":"Hoffmann, Michael","first_name":"Michael"}],"date_created":"2021-06-15T11:09:50Z","year":"2017","citation":{"ieee":"S. Lammers <i>et al.</i>, “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in <i>Proceedings of the 14th Rapid.Tech Conference</i>, 2017, pp. 80–93.","chicago":"Lammers, Stefan, Francesco Quattrone, Rafael Mrozek, Detmar Zimmer, Hans-Joachim Schmid, Bernd Ponick, and Michael Hoffmann. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” In <i>Proceedings of the 14th Rapid.Tech Conference</i>, 80–93. Hanser Verlag, 2017. <a href=\"https://doi.org/10.3139/9783446454606.006\">https://doi.org/10.3139/9783446454606.006</a>.","ama":"Lammers S, Quattrone F, Mrozek R, et al. Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In: <i>Proceedings of the 14th Rapid.Tech Conference</i>. Hanser Verlag; 2017:80-93. doi:<a href=\"https://doi.org/10.3139/9783446454606.006\">10.3139/9783446454606.006</a>","mla":"Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” <i>Proceedings of the 14th Rapid.Tech Conference</i>, Hanser Verlag, 2017, pp. 80–93, doi:<a href=\"https://doi.org/10.3139/9783446454606.006\">10.3139/9783446454606.006</a>.","bibtex":"@inproceedings{Lammers_Quattrone_Mrozek_Zimmer_Schmid_Ponick_Hoffmann_2017, title={Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine}, DOI={<a href=\"https://doi.org/10.3139/9783446454606.006\">10.3139/9783446454606.006</a>}, booktitle={Proceedings of the 14th Rapid.Tech Conference}, publisher={Hanser Verlag}, author={Lammers, Stefan and Quattrone, Francesco and Mrozek, Rafael and Zimmer, Detmar and Schmid, Hans-Joachim and Ponick, Bernd and Hoffmann, Michael}, year={2017}, pages={80–93} }","short":"S. Lammers, F. Quattrone, R. Mrozek, D. Zimmer, H.-J. Schmid, B. Ponick, M. Hoffmann, in: Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93.","apa":"Lammers, S., Quattrone, F., Mrozek, R., Zimmer, D., Schmid, H.-J., Ponick, B., &#38; Hoffmann, M. (2017). Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In <i>Proceedings of the 14th Rapid.Tech Conference</i> (pp. 80–93). Hanser Verlag. <a href=\"https://doi.org/10.3139/9783446454606.006\">https://doi.org/10.3139/9783446454606.006</a>"},"page":"80-93","publication_identifier":{"isbn":["978-3-446-45459-0"]},"language":[{"iso":"eng"}],"_id":"22420","user_id":"38077","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"abstract":[{"text":"Additive Fertigungsverfahren (engl.: Additive Manufacturing, kurz: AM) ermöglichen die werkzeuglose Herstellung von Komponenten und kompletten Baugruppen direkt aus dem 3D-CAD-Modell. Insbesondere additiv hergestellte Leichtbaukonstruktionen weisen ein hohes Potential für den Elektromaschinenbau auf. In diesem Paper werden erste Ansätze zur additiven Fertigung einer Rotorwelle für eine permanentmagneterregte Synchronmaschine (PMSM) aufgezeigt. Die Verbesserung einer ausgeprägten Leichtbaukonstruktion der Rotorwelle sowie die Charakterisierung des additiv verarbeiteten Werkstoffs werden aufgeführt. Hierzu wurden Prüfkörper aus dem Werkstoffs H13 (1.2344) hergestellt. Des Weiteren wurden Prüfkörper additiv gefertigter Gitterstrukturen entwickelt und untersucht. Zur Werkstoffcharakterisierung wurden sowohl mechanische Eigenschaften ermittelt, wie die Streckgrenze, die Zugfestigkeit und die Härte als auch elektromagnetische Eigenschaften, wie die Koerzitivfeldstärke, die elektrische Leitfähigkeit und die Permeabilität. Die Ergebnisse zeigen, dass die magnetischen Eigenschaften von H13 durch eine angeschlossene Wärmebehandlung deutlich verbessert werden konnten. Im Anschluss an die Werkstoffcharakterisierung wurde ein innovatives Leichtbau-Rotorwellenkonzept mit internen Gitterstrukturen entwickelt. Verglichen mit einem konventionell gefertigten Rotor konnte die Rotormasse um 25% reduziert werden sowie das Massenträgheitsmoment um 23% reduziert werden bei einer Testdrehzahl von 3000 U/min und einem Drehmoment von 71,98 Nm.","lang":"eng"}],"status":"public","type":"conference","publication":"Proceedings of the 14th Rapid.Tech Conference"}]