---
_id: '53638'
abstract:
- lang: eng
text: Abstract. Spring steel wires are usually supplied and stored on coils.
The manufacturing and coiling processes of these wires induce inhomogeneous plastic
deformations that lead to undesirable residual stresses and varying wire curvatures
in the semi-finished product. These residual stresses and curvatures defects are
causing varying process conditions in the subsequent manufacturing processes,
which have a negative impact on the product quality, leading to wastage and thus
affecting the economic and ecological efficiency. Especially the curvature deviations
must be compensated for the stability of the subsequent processes. This is usually
realised with roller straighteners, which are set manually by the machine operators
only at the beginning of a process. In this paper, we introduce a new approach
with a modular straightening-machine design and a new set-up process. The more
isolated deformation behaviour in a module-based straightener overcomes the complexity
of interactions between the close-positioned spaced straightening rollers. This
is combined with a set-up process that is independent of conventional material
testing, modelling the actual and batch-specific behaviour of the wire in the
straightening process. The exact knowledge and time-consuming determination of
the material properties thus becomes obsolete. The experimental investigations
show the influence of defined straightening strategies on the residual stress
evolution and the residual forming limit of the spring steel wires (X10CrNi18-8)
in the new straightening process.
author:
- first_name: Frederik Simon
full_name: Dahms, Frederik Simon
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms FS, Homberg W. Modular 3D roller straightening – A new approach to straightening
and forming of spring steel wires (X10CrNi18-8). In: Materials Research Proceedings.
Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-154'
apa: Dahms, F. S., & Homberg, W. (2024). Modular 3D roller straightening – A
new approach to straightening and forming of spring steel wires (X10CrNi18-8).
Materials Research Proceedings. ESAFORM2024, Toulouse. https://doi.org/10.21741/9781644903131-154
bibtex: '@inproceedings{Dahms_Homberg_2024, title={Modular 3D roller straightening
– A new approach to straightening and forming of spring steel wires (X10CrNi18-8)},
DOI={10.21741/9781644903131-154},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Dahms, Frederik Simon and Homberg, Werner}, year={2024} }'
chicago: Dahms, Frederik Simon, and Werner Homberg. “Modular 3D Roller Straightening
– A New Approach to Straightening and Forming of Spring Steel Wires (X10CrNi18-8).”
In Materials Research Proceedings. Materials Research Forum LLC, 2024.
https://doi.org/10.21741/9781644903131-154.
ieee: 'F. S. Dahms and W. Homberg, “Modular 3D roller straightening – A new approach
to straightening and forming of spring steel wires (X10CrNi18-8),” presented at
the ESAFORM2024, Toulouse, 2024, doi: 10.21741/9781644903131-154.'
mla: Dahms, Frederik Simon, and Werner Homberg. “Modular 3D Roller Straightening
– A New Approach to Straightening and Forming of Spring Steel Wires (X10CrNi18-8).”
Materials Research Proceedings, Materials Research Forum LLC, 2024, doi:10.21741/9781644903131-154.
short: 'F.S. Dahms, W. Homberg, in: Materials Research Proceedings, Materials Research
Forum LLC, 2024.'
conference:
location: Toulouse
name: ESAFORM2024
date_created: 2024-04-25T08:29:20Z
date_updated: 2024-05-27T08:16:18Z
department:
- _id: '156'
doi: 10.21741/9781644903131-154
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Modular 3D roller straightening – A new approach to straightening and forming
of spring steel wires (X10CrNi18-8)
type: conference
user_id: '64977'
year: '2024'
...
---
_id: '48001'
author:
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Bathelt L, Djakow E, Dahms F, Henke C, Trächtler A, Homberg W. Neuartiger
Ansatz zum Richten von zwei- und dreidimensionalen Fehlern an einem Federdraht.
In: Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung,
Prüfung Und Gestaltung von Federn Und Werkstoffen. ISLE Steuerungstechnik
und Leistungselektronik; 2023.'
apa: 'Bathelt, L., Djakow, E., Dahms, F., Henke, C., Trächtler, A., & Homberg,
W. (2023). Neuartiger Ansatz zum Richten von zwei- und dreidimensionalen Fehlern
an einem Federdraht. Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion,
Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen. Ilmenauer Federntag
2023, Ilmenau.'
bibtex: '@inproceedings{Bathelt_Djakow_Dahms_Henke_Trächtler_Homberg_2023, place={Ilmenau,
Germany}, title={Neuartiger Ansatz zum Richten von zwei- und dreidimensionalen
Fehlern an einem Federdraht}, booktitle={Ilmenauer Federntag 2023: Neueste Erkenntnisse
zu Funktion, Berechnung, Prüfung und Gestaltung von Federn und Werkstoffen}, publisher={ISLE
Steuerungstechnik und Leistungselektronik}, author={Bathelt, Lukas and Djakow,
Eugen and Dahms, Frederik and Henke, Christian and Trächtler, Ansgar and Homberg,
Werner}, year={2023} }'
chicago: 'Bathelt, Lukas, Eugen Djakow, Frederik Dahms, Christian Henke, Ansgar
Trächtler, and Werner Homberg. “Neuartiger Ansatz Zum Richten von Zwei- Und Dreidimensionalen
Fehlern an Einem Federdraht.” In Ilmenauer Federntag 2023: Neueste Erkenntnisse
Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen.
Ilmenau, Germany: ISLE Steuerungstechnik und Leistungselektronik, 2023.'
ieee: L. Bathelt, E. Djakow, F. Dahms, C. Henke, A. Trächtler, and W. Homberg, “Neuartiger
Ansatz zum Richten von zwei- und dreidimensionalen Fehlern an einem Federdraht,”
presented at the Ilmenauer Federntag 2023, Ilmenau, 2023.
mla: 'Bathelt, Lukas, et al. “Neuartiger Ansatz Zum Richten von Zwei- Und Dreidimensionalen
Fehlern an Einem Federdraht.” Ilmenauer Federntag 2023: Neueste Erkenntnisse
Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen,
ISLE Steuerungstechnik und Leistungselektronik, 2023.'
short: 'L. Bathelt, E. Djakow, F. Dahms, C. Henke, A. Trächtler, W. Homberg, in:
Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung, Prüfung
Und Gestaltung von Federn Und Werkstoffen, ISLE Steuerungstechnik und Leistungselektronik,
Ilmenau, Germany, 2023.'
conference:
end_date: 2023-09-19
location: Ilmenau
name: Ilmenauer Federntag 2023
start_date: 2023-09-18
date_created: 2023-10-11T11:45:56Z
date_updated: 2023-10-31T14:56:44Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
language:
- iso: eng
place: Ilmenau, Germany
publication: 'Ilmenauer Federntag 2023: Neueste Erkenntnisse zu Funktion, Berechnung,
Prüfung und Gestaltung von Federn und Werkstoffen'
publication_identifier:
isbn:
- 978-3-948595-09-8
publisher: ISLE Steuerungstechnik und Leistungselektronik
quality_controlled: '1'
status: public
title: Neuartiger Ansatz zum Richten von zwei- und dreidimensionalen Fehlern an einem
Federdraht
type: conference
user_id: '14931'
year: '2023'
...
---
_id: '44035'
abstract:
- lang: eng
text: Abstract. Friction-spinning as an innovative incremental forming process
enables large degrees of deformation in tube and sheet metal-forming due to a
self-induced heat generation in the forming zone. This paper presents new process
designs for energy and resource-efficient forming of gas cylinders by friction-spinning
without the use of an external heat supply. The self-generated heat enables friction-spinning
process to reduce the energy demand in the manufacture of gas cylinders, which
are usually manufactured with external heat (mostly fossil fuels), by 95 %. Typical
gas cylinder contours, such as flattened and spherical bottom ends and cylinder
necks, are manufactured by friction-spinning of AW 6060 tubular profiles with
specifically designed tool path strategies. It is shown that friction-spinning
enables the manufacture of typical gas cylinder contours with sufficient wall
thickness and the required gas tightness without the input of external heat. Thus,
this process can contribute to an increase in the energy and resource efficiency
of forming processes.
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Energy and Resource-efficient Forming of Gas Cylinders
by Friction-Spinning. In: Materials Research Proceedings. Materials Research
Forum LLC; 2023. doi:10.21741/9781644902479-208'
apa: Dahms, F., & Homberg, W. (2023). Energy and Resource-efficient Forming
of Gas Cylinders by Friction-Spinning. Materials Research Proceedings.
ESAFORM 2023, Krakau. https://doi.org/10.21741/9781644902479-208
bibtex: '@inproceedings{Dahms_Homberg_2023, title={Energy and Resource-efficient
Forming of Gas Cylinders by Friction-Spinning}, DOI={10.21741/9781644902479-208},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Dahms, Frederik and Homberg, Werner}, year={2023} }'
chicago: Dahms, Frederik, and Werner Homberg. “Energy and Resource-Efficient Forming
of Gas Cylinders by Friction-Spinning.” In Materials Research Proceedings.
Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-208.
ieee: 'F. Dahms and W. Homberg, “Energy and Resource-efficient Forming of Gas Cylinders
by Friction-Spinning,” presented at the ESAFORM 2023, Krakau, 2023, doi: 10.21741/9781644902479-208.'
mla: Dahms, Frederik, and Werner Homberg. “Energy and Resource-Efficient Forming
of Gas Cylinders by Friction-Spinning.” Materials Research Proceedings,
Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-208.
short: 'F. Dahms, W. Homberg, in: Materials Research Proceedings, Materials Research
Forum LLC, 2023.'
conference:
end_date: 2023-04-21
location: Krakau
name: ESAFORM 2023
start_date: 2023-04-19
date_created: 2023-04-17T07:40:54Z
date_updated: 2023-04-27T10:30:44Z
department:
- _id: '156'
doi: 10.21741/9781644902479-208
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://www.mrforum.com/product/9781644902479-208/
status: public
title: Energy and Resource-efficient Forming of Gas Cylinders by Friction-Spinning
type: conference
user_id: '64977'
year: '2023'
...
---
_id: '46691'
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Analysis and Modelling of the Deformation in the Manufacture
of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process.
In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland;
2023. doi:10.1007/978-3-031-41023-9_72'
apa: Dahms, F., & Homberg, W. (2023). Analysis and Modelling of the Deformation
in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming
Process. In Lecture Notes in Mechanical Engineering. 14th International
Conference on the Technology of Plasticity, 2023, Cannes, France. Springer Nature
Switzerland. https://doi.org/10.1007/978-3-031-41023-9_72
bibtex: '@inbook{Dahms_Homberg_2023, title={Analysis and Modelling of the Deformation
in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming
Process}, DOI={10.1007/978-3-031-41023-9_72},
booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature
Switzerland}, author={Dahms, Frederik and Homberg, Werner}, year={2023} }'
chicago: Dahms, Frederik, and Werner Homberg. “Analysis and Modelling of the Deformation
in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming
Process.” In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland,
2023. https://doi.org/10.1007/978-3-031-41023-9_72.
ieee: F. Dahms and W. Homberg, “Analysis and Modelling of the Deformation in the
Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming
Process,” in Lecture Notes in Mechanical Engineering, Springer Nature Switzerland,
2023.
mla: Dahms, Frederik, and Werner Homberg. “Analysis and Modelling of the Deformation
in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming
Process.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland,
2023, doi:10.1007/978-3-031-41023-9_72.
short: 'F. Dahms, W. Homberg, in: Lecture Notes in Mechanical Engineering, Springer
Nature Switzerland, 2023.'
conference:
location: Cannes, France
name: 14th International Conference on the Technology of Plasticity, 2023
date_created: 2023-08-25T09:16:21Z
date_updated: 2023-08-25T09:22:29Z
department:
- _id: '156'
doi: 10.1007/978-3-031-41023-9_72
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-031-41023-9_72
publication: Lecture Notes in Mechanical Engineering
publication_identifier:
isbn:
- '9783031410222'
- '9783031410239'
issn:
- 2195-4356
- 2195-4364
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours
by the Combined Friction-Spinning and Flow-Forming Process
type: book_chapter
user_id: '64977'
year: '2023'
...
---
_id: '32412'
abstract:
- lang: eng
text: Friction-spinning as an innovative incremental forming process enables
large degrees of deformation in the field of tube and sheet metal forming due
to a self-induced heat generation in the forming zone. This paper presents a new
tool and process design with a driven tool for the targeted adjustment of residual
stress distributions in the friction-spinning process. Locally adapted residual
stress depth distributions are intended to improve the functionality of the friction-spinning
workpieces, e.g. by delaying failure or triggering it in a defined way. The new
process designs with the driven tool and a subsequent flow-forming operation are
investigated regarding the influence on the residual stress depth distributions
compared to those of standard friction-spinning process. Residual stress depth
distributions are measured with the incremental hole-drilling method. The workpieces
(tubular part with a flange) are manufactured using heat-treatable 3.3206 (EN-AW
6060 T6) tubular profiles. It is shown that the residual stress depth distributions
change significantly due to the new process designs, which offers new potentials
for the targeted adjustment of residual stresses that serve to improve the workpiece
properties.
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Manufacture of Defined Residual Stress Distributions in
the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming. Key
Engineering Materials. 2022;926:683-689. doi:10.4028/p-3rk19y'
apa: 'Dahms, F., & Homberg, W. (2022). Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.
Key Engineering Materials, 926, 683–689. https://doi.org/10.4028/p-3rk19y'
bibtex: '@article{Dahms_Homberg_2022, title={Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming},
volume={926}, DOI={10.4028/p-3rk19y},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Dahms, Frederik and Homberg, Werner}, year={2022}, pages={683–689} }'
chicago: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual
Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent
Flow-Forming.” Key Engineering Materials 926 (2022): 683–89. https://doi.org/10.4028/p-3rk19y.'
ieee: 'F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions
in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming,” Key
Engineering Materials, vol. 926, pp. 683–689, 2022, doi: 10.4028/p-3rk19y.'
mla: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.”
Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022,
pp. 683–89, doi:10.4028/p-3rk19y.'
short: F. Dahms, W. Homberg, Key Engineering Materials 926 (2022) 683–689.
conference:
end_date: 29 April 2022
location: Braga, Portugal
name: 25th International Conference on Material Forming (ESAFORM 2022)
start_date: 27 April 2022
date_created: 2022-07-25T08:32:43Z
date_updated: 2023-04-27T10:30:38Z
department:
- _id: '156'
doi: 10.4028/p-3rk19y
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 683-689
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: 'Manufacture of Defined Residual Stress Distributions in the Friction-Spinning
Process: Driven Tool and Subsequent Flow-Forming'
type: journal_article
user_id: '64977'
volume: 926
year: '2022'
...
---
_id: '29357'
abstract:
- lang: eng
text: Friction-spinning as an innovative incremental forming process enables
high degrees of deformation in the field of tube and sheet metal forming due to
self-induced heat generation in the forming area. The complex thermomechanical
conditions generate non-uniform residual stress distributions. In order to specifically
adjust these residual stress distributions, the influence of different process
parameters on residual stress distributions in flanges formed by the friction-spinning
of tubes is investigated using the design of experiments (DoE) method. The feed
rate with an effect of −156 MPa/mm is the dominating control parameter for residual
stress depth distribution in steel flange forming, whereas the rotation speed
of the workpiece with an effect of 18 MPa/mm dominates the gradient of residual
stress generation in the aluminium flange-forming process. A run-to-run predictive
control system for the specific adjustment of residual stress distributions is
proposed and validated. The predictive model provides an initial solution in the
form of a parameter set, and the controlled feedback iteratively approaches the
target value with new parameter sets recalculated on the basis of the deviation
of the previous run. Residual stress measurements are carried out using the hole-drilling
method and X-ray diffraction by the cosα-method.
article_number: '158'
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Manufacture of Defined Residual Stress Distributions in
the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.
Metals. 2022;12(1). doi:10.3390/met12010158'
apa: 'Dahms, F., & Homberg, W. (2022). Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control. Metals, 12(1), Article 158. https://doi.org/10.3390/met12010158'
bibtex: '@article{Dahms_Homberg_2022, title={Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control}, volume={12}, DOI={10.3390/met12010158},
number={1158}, journal={Metals}, publisher={MDPI AG}, author={Dahms, Frederik
and Homberg, Werner}, year={2022} }'
chicago: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual
Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control.” Metals 12, no. 1 (2022). https://doi.org/10.3390/met12010158.'
ieee: 'F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions
in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control,”
Metals, vol. 12, no. 1, Art. no. 158, 2022, doi: 10.3390/met12010158.'
mla: 'Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress
Distributions in the Friction-Spinning Process: Investigations and Run-to-Run
Predictive Control.” Metals, vol. 12, no. 1, 158, MDPI AG, 2022, doi:10.3390/met12010158.'
short: F. Dahms, W. Homberg, Metals 12 (2022).
date_created: 2022-01-17T08:21:04Z
date_updated: 2023-04-27T10:30:32Z
department:
- _id: '156'
doi: 10.3390/met12010158
intvolume: ' 12'
issue: '1'
keyword:
- General Materials Science
- Metals and Alloys
language:
- iso: eng
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: 'Manufacture of Defined Residual Stress Distributions in the Friction-Spinning
Process: Investigations and Run-to-Run Predictive Control'
type: journal_article
user_id: '64977'
volume: 12
year: '2022'
...
---
_id: '22766'
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Investigations and Improvements in 3D-DIC Optical Residual
Stress Analysis—A New Temperature Compensation Method. In: Forming the Future.
Springer, Cham; 2021:2249-2259. doi:10.1007/978-3-030-75381-8_189'
apa: Dahms, F., & Homberg, W. (2021). Investigations and Improvements in 3D-DIC
Optical Residual Stress Analysis—A New Temperature Compensation Method. In Forming
the Future (pp. 2249–2259). Springer, Cham. https://doi.org/10.1007/978-3-030-75381-8_189
bibtex: '@inbook{Dahms_Homberg_2021, title={Investigations and Improvements in 3D-DIC
Optical Residual Stress Analysis—A New Temperature Compensation Method}, DOI={10.1007/978-3-030-75381-8_189},
booktitle={Forming the Future}, publisher={Springer, Cham}, author={Dahms, Frederik
and Homberg, Werner}, year={2021}, pages={2249–2259} }'
chicago: Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in
3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method.”
In Forming the Future, 2249–59. Springer, Cham, 2021. https://doi.org/10.1007/978-3-030-75381-8_189.
ieee: F. Dahms and W. Homberg, “Investigations and Improvements in 3D-DIC Optical
Residual Stress Analysis—A New Temperature Compensation Method,” in Forming
the Future, Springer, Cham, 2021, pp. 2249–2259.
mla: Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in 3D-DIC
Optical Residual Stress Analysis—A New Temperature Compensation Method.” Forming
the Future, Springer, Cham, 2021, pp. 2249–59, doi:10.1007/978-3-030-75381-8_189.
short: 'F. Dahms, W. Homberg, in: Forming the Future, Springer, Cham, 2021, pp.
2249–2259.'
conference:
end_date: 2021-07-30
location: Ohio, USA, VIRTUAL EVENT
name: The 13th International Conference on the Technology of Plasticity
start_date: 2021-07-25
date_created: 2021-07-16T14:55:05Z
date_updated: 2023-04-27T10:30:18Z
department:
- _id: '156'
doi: 10.1007/978-3-030-75381-8_189
language:
- iso: eng
page: 2249-2259
publication: Forming the Future
publication_identifier:
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer, Cham
quality_controlled: '1'
status: public
title: Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A
New Temperature Compensation Method
type: book_chapter
user_id: '64977'
year: '2021'
...