[{"year":"2024","quality_controlled":"1","issue":"11","title":"The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component","publisher":"MDPI AG","date_created":"2024-11-28T08:45:06Z","abstract":[{"lang":"eng","text":"<jats:p>Additive manufacturing of metallic components often results in the formation of columnar grain structures aligned along the build direction. These elongated grains can introduce anisotropy, negatively impacting the mechanical properties of the components. This study aimed to achieve controlled solidification with a fine-grained microstructure to enhance the mechanical performance of printed parts. Stainless steel 316L was used as the test material. High-intensity ultrasound was applied during the direct energy deposition (DED) process to inhibit the formation of columnar grains. The investigation emphasized the importance of amplitude changes of the ultrasound wave as the system’s geometry continuously evolves with the addition of multiple layers and assessed how these changes influence the grain size and distribution. Initial tests revealed significant amplitude fluctuations during layer deposition, highlighting the impact of layer deposition on process uniformity. The mechanical results demonstrated that the application of ultrasound effectively refined the grain structure, leading to a 15% increase in tensile strength compared to conventionally additively manufactured samples.</jats:p>"}],"file":[{"success":1,"relation":"main_file","content_type":"application/pdf","file_size":5779744,"access_level":"closed","file_name":"crystals-14-01001-v2 (4).pdf","file_id":"57470","date_updated":"2024-11-28T08:52:48Z","creator":"dlehnert","date_created":"2024-11-28T08:52:48Z"}],"publication":"Crystals","ddc":["670"],"language":[{"iso":"eng"}],"citation":{"ama":"Lehnert D, Bödger C, Pabel P, et al. The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component. <i>Crystals</i>. 2024;14(11). doi:<a href=\"https://doi.org/10.3390/cryst14111001\">10.3390/cryst14111001</a>","ieee":"D. Lehnert <i>et al.</i>, “The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component,” <i>Crystals</i>, vol. 14, no. 11, Art. no. 1001, 2024, doi: <a href=\"https://doi.org/10.3390/cryst14111001\">10.3390/cryst14111001</a>.","chicago":"Lehnert, Dennis, Christian Bödger, Philipp Pabel, Claus Scheidemann, Tobias Hemsel, Stefan Gnaase, David Kostka, and Thomas Tröster. “The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component.” <i>Crystals</i> 14, no. 11 (2024). <a href=\"https://doi.org/10.3390/cryst14111001\">https://doi.org/10.3390/cryst14111001</a>.","mla":"Lehnert, Dennis, et al. “The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component.” <i>Crystals</i>, vol. 14, no. 11, 1001, MDPI AG, 2024, doi:<a href=\"https://doi.org/10.3390/cryst14111001\">10.3390/cryst14111001</a>.","bibtex":"@article{Lehnert_Bödger_Pabel_Scheidemann_Hemsel_Gnaase_Kostka_Tröster_2024, title={The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component}, volume={14}, DOI={<a href=\"https://doi.org/10.3390/cryst14111001\">10.3390/cryst14111001</a>}, number={111001}, journal={Crystals}, publisher={MDPI AG}, author={Lehnert, Dennis and Bödger, Christian and Pabel, Philipp and Scheidemann, Claus and Hemsel, Tobias and Gnaase, Stefan and Kostka, David and Tröster, Thomas}, year={2024} }","short":"D. Lehnert, C. Bödger, P. Pabel, C. Scheidemann, T. Hemsel, S. Gnaase, D. Kostka, T. Tröster, Crystals 14 (2024).","apa":"Lehnert, D., Bödger, C., Pabel, P., Scheidemann, C., Hemsel, T., Gnaase, S., Kostka, D., &#38; Tröster, T. (2024). The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component. <i>Crystals</i>, <i>14</i>(11), Article 1001. <a href=\"https://doi.org/10.3390/cryst14111001\">https://doi.org/10.3390/cryst14111001</a>"},"intvolume":"        14","publication_status":"published","publication_identifier":{"issn":["2073-4352"]},"has_accepted_license":"1","doi":"10.3390/cryst14111001","date_updated":"2026-02-23T08:07:37Z","author":[{"last_name":"Lehnert","full_name":"Lehnert, Dennis","id":"90491","first_name":"Dennis"},{"full_name":"Bödger, Christian","id":"93904","last_name":"Bödger","first_name":"Christian"},{"last_name":"Pabel","id":"67374","full_name":"Pabel, Philipp","first_name":"Philipp"},{"last_name":"Scheidemann","id":"38259","full_name":"Scheidemann, Claus","first_name":"Claus"},{"full_name":"Hemsel, Tobias","id":"210","last_name":"Hemsel","first_name":"Tobias"},{"last_name":"Gnaase","full_name":"Gnaase, Stefan","id":"25730","first_name":"Stefan"},{"full_name":"Kostka, David","last_name":"Kostka","first_name":"David"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"}],"volume":14,"status":"public","type":"journal_article","article_number":"1001","file_date_updated":"2024-11-28T08:52:48Z","_id":"57467","user_id":"93904","department":[{"_id":"149"},{"_id":"321"},{"_id":"9"}]},{"title":"Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling","date_created":"2024-12-10T12:13:23Z","publisher":"MDPI AG","year":"2024","issue":"12","quality_controlled":"1","language":[{"iso":"eng"}],"ddc":["670"],"keyword":["additive manufacturing","direct energy deposition","laser metal deposition"],"abstract":[{"lang":"eng","text":"<jats:p>The optimization of process parameters in powder Directed Energy Deposition (DED) is essential for achieving consistent, high-quality bead geometries, which directly influence the performance and structural integrity of fabricated components. As a subset of additive manufacturing (AM), the DED process, also referred to as laser metal deposition (LMD), enables precise, layer-by-layer material deposition, making it highly suitable for complex geometries and part repair applications. Critical parameters, such as the laser power, feed rate, powder mass flow, and substrate temperature govern the deposition process, impacting the bead height, width, contact angle, and dilution. Inconsistent control over these variables can lead to defects, such as poor bonding, dimensional inaccuracies, and material weaknesses, ultimately compromising the final product. This paper investigates the effects of various process parameters, specifically the substrate temperature, on bead track geometry in DED processes for stainless steel (1.4404). A specialized experimental setup, integrated within a DED machine, facilitates the controlled thermal conditioning of sample sheets. Using Design of Experiments (DoE) methods, individual bead marks are generated and analyzed to assess geometric characteristics. Regression models, including both linear and quadratic approaches, are constructed to predict machine parameters for achieving the desired bead geometry at different substrate temperatures. Validation experiments confirm the accuracy and reliability of the models, particularly in predicting the bead height, bead width, and contact angle across a broad range of substrate temperatures. However, the models demonstrated limitations in accurately predicting dilution, indicating the need for further refinement. Despite some deviations in measured values, successful fabrication is achieved, demonstrating robust bonding between the bead and substrate. The developed models offer insights into optimizing DED process parameters to achieve desired bead characteristics, advancing the precision and reliability of additive manufacturing technology. Future work will focus on refining the regression models to improve predictions, particularly for dilution, and further investigate non-linear interactions between process variables.</jats:p>"}],"publication":"Metals","main_file_link":[{"url":"https://www.mdpi.com/2075-4701/14/12/1353","open_access":"1"}],"doi":"10.3390/met14121353","author":[{"first_name":"Deviprasad","full_name":"Chalicheemalapalli Jayasankar, Deviprasad","id":"49504","last_name":"Chalicheemalapalli Jayasankar","orcid":"https://orcid.org/ 0000-0002-3446-2444"},{"first_name":"Stefan","last_name":"Gnaase","full_name":"Gnaase, Stefan","id":"25730"},{"first_name":"Dennis","full_name":"Lehnert, Dennis","id":"90491","last_name":"Lehnert"},{"full_name":"Walter, Artur","last_name":"Walter","first_name":"Artur"},{"first_name":"Robin","last_name":"Rohling","full_name":"Rohling, Robin"},{"full_name":"Tröster, Thomas","id":"553","last_name":"Tröster","first_name":"Thomas"}],"volume":14,"date_updated":"2026-03-20T08:44:28Z","oa":"1","citation":{"ama":"Chalicheemalapalli Jayasankar D, Gnaase S, Lehnert D, Walter A, Rohling R, Tröster T. Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. <i>Metals</i>. 2024;14(12). doi:<a href=\"https://doi.org/10.3390/met14121353\">10.3390/met14121353</a>","ieee":"D. Chalicheemalapalli Jayasankar, S. Gnaase, D. Lehnert, A. Walter, R. Rohling, and T. Tröster, “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling,” <i>Metals</i>, vol. 14, no. 12, Art. no. 1353, 2024, doi: <a href=\"https://doi.org/10.3390/met14121353\">10.3390/met14121353</a>.","chicago":"Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Dennis Lehnert, Artur Walter, Robin Rohling, and Thomas Tröster. “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling.” <i>Metals</i> 14, no. 12 (2024). <a href=\"https://doi.org/10.3390/met14121353\">https://doi.org/10.3390/met14121353</a>.","short":"D. Chalicheemalapalli Jayasankar, S. Gnaase, D. Lehnert, A. Walter, R. Rohling, T. Tröster, Metals 14 (2024).","bibtex":"@article{Chalicheemalapalli Jayasankar_Gnaase_Lehnert_Walter_Rohling_Tröster_2024, title={Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling}, volume={14}, DOI={<a href=\"https://doi.org/10.3390/met14121353\">10.3390/met14121353</a>}, number={121353}, journal={Metals}, publisher={MDPI AG}, author={Chalicheemalapalli Jayasankar, Deviprasad and Gnaase, Stefan and Lehnert, Dennis and Walter, Artur and Rohling, Robin and Tröster, Thomas}, year={2024} }","mla":"Chalicheemalapalli Jayasankar, Deviprasad, et al. “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling.” <i>Metals</i>, vol. 14, no. 12, 1353, MDPI AG, 2024, doi:<a href=\"https://doi.org/10.3390/met14121353\">10.3390/met14121353</a>.","apa":"Chalicheemalapalli Jayasankar, D., Gnaase, S., Lehnert, D., Walter, A., Rohling, R., &#38; Tröster, T. (2024). Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. <i>Metals</i>, <i>14</i>(12), Article 1353. <a href=\"https://doi.org/10.3390/met14121353\">https://doi.org/10.3390/met14121353</a>"},"intvolume":"        14","publication_status":"published","has_accepted_license":"1","publication_identifier":{"issn":["2075-4701"]},"article_number":"1353","article_type":"original","user_id":"49504","department":[{"_id":"321"},{"_id":"149"},{"_id":"9"}],"_id":"57699","status":"public","type":"journal_article"},{"user_id":"49504","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"_id":"56089","article_type":"original","article_number":"772","type":"journal_article","status":"public","author":[{"id":"49504","full_name":"Chalicheemalapalli Jayasankar, Deviprasad","orcid":"https://orcid.org/ 0000-0002-3446-2444","last_name":"Chalicheemalapalli Jayasankar","first_name":"Deviprasad"},{"id":"25730","full_name":"Gnaase, Stefan","last_name":"Gnaase","first_name":"Stefan"},{"last_name":"Kaiser","orcid":"0009-0008-1333-3396","id":"72351","full_name":"Kaiser, Maximilian Alexander","first_name":"Maximilian Alexander"},{"first_name":"Dennis","id":"90491","full_name":"Lehnert, Dennis","last_name":"Lehnert"},{"first_name":"Thomas","last_name":"Tröster","id":"553","full_name":"Tröster, Thomas"}],"volume":14,"date_updated":"2026-03-20T08:44:23Z","oa":"1","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2075-4701/14/7/772"}],"doi":"10.3390/met14070772","publication_status":"published","publication_identifier":{"issn":["2075-4701"]},"citation":{"chicago":"Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Maximilian Alexander Kaiser, Dennis Lehnert, and Thomas Tröster. “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications.” <i>Metals</i> 14, no. 7 (2024). <a href=\"https://doi.org/10.3390/met14070772\">https://doi.org/10.3390/met14070772</a>.","ieee":"D. Chalicheemalapalli Jayasankar, S. Gnaase, M. A. Kaiser, D. Lehnert, and T. Tröster, “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications,” <i>Metals</i>, vol. 14, no. 7, Art. no. 772, 2024, doi: <a href=\"https://doi.org/10.3390/met14070772\">10.3390/met14070772</a>.","ama":"Chalicheemalapalli Jayasankar D, Gnaase S, Kaiser MA, Lehnert D, Tröster T. Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. <i>Metals</i>. 2024;14(7). doi:<a href=\"https://doi.org/10.3390/met14070772\">10.3390/met14070772</a>","apa":"Chalicheemalapalli Jayasankar, D., Gnaase, S., Kaiser, M. A., Lehnert, D., &#38; Tröster, T. (2024). Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. <i>Metals</i>, <i>14</i>(7), Article 772. <a href=\"https://doi.org/10.3390/met14070772\">https://doi.org/10.3390/met14070772</a>","short":"D. Chalicheemalapalli Jayasankar, S. Gnaase, M.A. Kaiser, D. Lehnert, T. Tröster, Metals 14 (2024).","bibtex":"@article{Chalicheemalapalli Jayasankar_Gnaase_Kaiser_Lehnert_Tröster_2024, title={Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications}, volume={14}, DOI={<a href=\"https://doi.org/10.3390/met14070772\">10.3390/met14070772</a>}, number={7772}, journal={Metals}, publisher={MDPI AG}, author={Chalicheemalapalli Jayasankar, Deviprasad and Gnaase, Stefan and Kaiser, Maximilian Alexander and Lehnert, Dennis and Tröster, Thomas}, year={2024} }","mla":"Chalicheemalapalli Jayasankar, Deviprasad, et al. “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications.” <i>Metals</i>, vol. 14, no. 7, 772, MDPI AG, 2024, doi:<a href=\"https://doi.org/10.3390/met14070772\">10.3390/met14070772</a>."},"intvolume":"        14","language":[{"iso":"eng"}],"keyword":["additive manufacturing (AM)","selective laser melting (SLM)","laser metal deposition (LMD)","hybrid manufacturing","process optimization","316L","1.2709"],"publication":"Metals","abstract":[{"lang":"eng","text":"<jats:p>Additive manufacturing (AM) technologies enable near-net-shape designs and demand-oriented material usage, which significantly minimizes waste. This points to a substantial opportunity for further optimization in material savings and process design. The current study delves into the advancement of sustainable manufacturing practices in the automotive industry, emphasizing the crucial role of lightweight construction concepts and AM technologies in enhancing resource efficiency and reducing greenhouse gas emissions. By exploring the integration of novel AM techniques such as selective laser melting (SLM) and laser metal deposition (LMD), the study aims to overcome existing limitations like slow build-up rates and limited component resolution. The study’s core objective revolves around the development and validation of a continuous process chain that synergizes different AM routes. In the current study, the continuous process chain for DMG MORI Lasertec 65 3D’s LMD system and the DMG MORI Lasertec 30 3D’s was demonstrated using 316L and 1.2709 steel materials. This integrated approach is designed to significantly curtail process times and minimize component costs, thus suggesting an industry-oriented process chain for future manufacturing paradigms. Additionally, the research investigates the production and material behavior of components under varying manufacturing processes, material combinations, and boundary layer materials. The culmination of this study is the validation of the proposed process route through a technology demonstrator, assessing its scalability and setting a benchmark for resource-efficient manufacturing in the automotive sector.</jats:p>"}],"date_created":"2024-09-10T10:19:32Z","publisher":"MDPI AG","title":"Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications","issue":"7","quality_controlled":"1","year":"2024"},{"main_file_link":[{"url":"https://utw10945.utweb.utexas.edu/sites/default/files/2023/091%20InvestigationoftheInfluenceofProcessParametersonProductivityintheLPBFProcessfortheMat.pdf","open_access":"1"}],"conference":{"location":"Austin","end_date":"2023-08-16","start_date":"2023-08-14","name":"Solid Freeform Fabrication"},"date_updated":"2025-03-18T12:44:43Z","oa":"1","author":[{"last_name":"Bödger","full_name":"Bödger, Christian","id":"93904","first_name":"Christian"},{"last_name":"Gnaase","id":"25730","full_name":"Gnaase, Stefan","first_name":"Stefan"},{"first_name":"Dennis","id":"90491","full_name":"Lehnert, Dennis","last_name":"Lehnert"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}],"citation":{"ama":"Bödger C, Gnaase S, Lehnert D, Tröster T. Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. In: <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>. ; 2023.","chicago":"Bödger, Christian, Stefan Gnaase, Dennis Lehnert, and Thomas Tröster. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” In <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>, 2023.","ieee":"C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718,” presented at the Solid Freeform Fabrication, Austin, 2023.","short":"C. Bödger, S. Gnaase, D. Lehnert, T. Tröster, in: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.","mla":"Bödger, Christian, et al. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>, 2023.","bibtex":"@inproceedings{Bödger_Gnaase_Lehnert_Tröster_2023, title={Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718}, booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference}, author={Bödger, Christian and Gnaase, Stefan and Lehnert, Dennis and Tröster, Thomas}, year={2023} }","apa":"Bödger, C., Gnaase, S., Lehnert, D., &#38; Tröster, T. (2023). Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>. Solid Freeform Fabrication, Austin."},"publication_status":"published","has_accepted_license":"1","file_date_updated":"2024-01-23T08:25:26Z","_id":"50742","user_id":"90491","department":[{"_id":"149"},{"_id":"219"},{"_id":"321"},{"_id":"9"}],"status":"public","type":"conference","title":"Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718","date_created":"2024-01-23T08:32:28Z","year":"2023","ddc":["670"],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"The nickel-based alloy Inconel 718, which is used in aerospace technology, poses a great\r\nchallenge to conventional machining due to its high strain hardening and toughness. Here, the laser\r\npowder bed fusion process (LPBF) offers an alternative with potential savings if sufficiently high\r\nproductivity can be achieved. Based on the parameter study carried out, starting from the SLM\r\nSolutions standard parameters for the manufacturing of components, exposure parameters could be\r\ndeveloped to realize manufacturing with 120 μm and 150 μm layer thickness, with almost the same\r\ngeometric accuracy. For this purpose, the process parameters of laser power, focus diameter, hatch\r\ndistance and scan speed were varied. The negative defocusing of the laser showed a positive effect\r\non the density of the parts, realizing densities ≥ 99.94 %, with high dimensional stability and good\r\nmechanical properties. Considering the reduced manufacturing time of up to 61 %, a significant\r\nincrease in productivity was achieved."}],"file":[{"relation":"main_file","success":1,"content_type":"application/pdf","file_name":"Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel718 - Bödger.pdf","file_id":"50743","access_level":"closed","file_size":999107,"date_created":"2024-01-23T08:25:26Z","creator":"cboedger","date_updated":"2024-01-23T08:25:26Z"}],"publication":"Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference"},{"intvolume":"        13","citation":{"ama":"Gnaase S, Niggemeyer D, Lehnert D, Bödger C, Tröster T. Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. <i>Crystals</i>. 2023;13(2). doi:<a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>","chicago":"Gnaase, Stefan, Dennis Niggemeyer, Dennis Lehnert, Christian Bödger, and Thomas Tröster. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” <i>Crystals</i> 13, no. 2 (2023). <a href=\"https://doi.org/10.3390/cryst13020157\">https://doi.org/10.3390/cryst13020157</a>.","ieee":"S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,” <i>Crystals</i>, vol. 13, no. 2, Art. no. 157, 2023, doi: <a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>.","apa":"Gnaase, S., Niggemeyer, D., Lehnert, D., Bödger, C., &#38; Tröster, T. (2023). Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. <i>Crystals</i>, <i>13</i>(2), Article 157. <a href=\"https://doi.org/10.3390/cryst13020157\">https://doi.org/10.3390/cryst13020157</a>","mla":"Gnaase, Stefan, et al. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” <i>Crystals</i>, vol. 13, no. 2, 157, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>.","bibtex":"@article{Gnaase_Niggemeyer_Lehnert_Bödger_Tröster_2023, title={Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709}, volume={13}, DOI={<a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>}, number={2157}, journal={Crystals}, publisher={MDPI AG}, author={Gnaase, Stefan and Niggemeyer, Dennis and Lehnert, Dennis and Bödger, Christian and Tröster, Thomas}, year={2023} }","short":"S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, T. Tröster, Crystals 13 (2023)."},"publication_identifier":{"issn":["2073-4352"]},"publication_status":"published","doi":"10.3390/cryst13020157","date_updated":"2025-03-18T12:45:57Z","volume":13,"author":[{"id":"25730","full_name":"Gnaase, Stefan","last_name":"Gnaase","first_name":"Stefan"},{"last_name":"Niggemeyer","id":"77214","full_name":"Niggemeyer, Dennis","first_name":"Dennis"},{"last_name":"Lehnert","id":"90491","full_name":"Lehnert, Dennis","first_name":"Dennis"},{"first_name":"Christian","last_name":"Bödger","id":"93904","full_name":"Bödger, Christian"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"}],"status":"public","type":"journal_article","article_type":"original","article_number":"157","file_date_updated":"2024-11-22T15:55:07Z","_id":"37200","department":[{"_id":"149"},{"_id":"9"},{"_id":"321"}],"user_id":"90491","year":"2023","quality_controlled":"1","issue":"2","title":"Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709","publisher":"MDPI AG","date_created":"2023-01-18T05:44:59Z","abstract":[{"text":"<jats:p>(1) This work answers the question of whether and to what extent there is a significant difference in mechanical properties when different additive manufacturing processes are applied to the material 1.2709. The Laser-Powder-Bed-Fusion (L-PBF) and Laser-Metal-Deposition (LMD) processes are considered, as they differ fundamentally in the way a part is manufactured. (2) Known process parameters for low-porosity parts were used to fabricate tensile strength specimens. Half of the specimens were heat-treated, and all specimens were tested for mechanical properties in a quasi-static tensile test. In addition, the material hardness was determined. (3) It was found that, firstly, heat treatment resulted in a sharp increase in mechanical properties such as hardness, elastic modulus, yield strength and ultimate strength. In addition to the increase in these properties, the elongation at break also decreases significantly after heat treatment. The choice of process, on the other hand, does not give either process a clear advantage in terms of mechanical properties but shows that it is necessary to consider the essential mechanical properties for a desired application.</jats:p>","lang":"eng"}],"file":[{"file_name":"crystals-13-00157.pdf","file_id":"57334","access_level":"closed","file_size":5838834,"date_created":"2024-11-22T15:55:07Z","creator":"cboedger","date_updated":"2024-11-22T15:55:07Z","relation":"main_file","success":1,"content_type":"application/pdf"}],"publication":"Crystals","keyword":["Inorganic Chemistry","Condensed Matter Physics","General Materials Science","General Chemical Engineering"],"ddc":["670"],"language":[{"iso":"eng"}]}]