---
_id: '42630'
author:
- first_name: Christian
full_name: Fuchs, Christian
id: '21863'
last_name: Fuchs
orcid: 0000-0003-0589-4579
citation:
ama: 'Fuchs C. Validation Report. Deliverable D5.3 of the EU FP7 Project “PACT
– Public Perception of Security and Privacy: Assessing Knowledge, Collecting Evidence,
Translating Research into Action” (Grant Agreement Number: 285635).; 2015.'
apa: 'Fuchs, C. (2015). Validation Report. Deliverable D5.3 of the EU FP7 project
“PACT – Public Perception of Security and Privacy: Assessing Knowledge, Collecting
Evidence, Translating Research into Action” (grant agreement number: 285635).'
bibtex: '@book{Fuchs_2015, title={Validation Report. Deliverable D5.3 of the EU
FP7 project “PACT – Public Perception of Security and Privacy: Assessing Knowledge,
Collecting Evidence, Translating Research into Action” (grant agreement number:
285635)}, author={Fuchs, Christian}, year={2015} }'
chicago: 'Fuchs, Christian. Validation Report. Deliverable D5.3 of the EU FP7
Project “PACT – Public Perception of Security and Privacy: Assessing Knowledge,
Collecting Evidence, Translating Research into Action” (Grant Agreement Number:
285635), 2015.'
ieee: 'C. Fuchs, Validation Report. Deliverable D5.3 of the EU FP7 project “PACT
– Public Perception of Security and Privacy: Assessing Knowledge, Collecting Evidence,
Translating Research into Action” (grant agreement number: 285635). 2015.'
mla: 'Fuchs, Christian. Validation Report. Deliverable D5.3 of the EU FP7 Project
“PACT – Public Perception of Security and Privacy: Assessing Knowledge, Collecting
Evidence, Translating Research into Action” (Grant Agreement Number: 285635).
2015.'
short: 'C. Fuchs, Validation Report. Deliverable D5.3 of the EU FP7 Project “PACT
– Public Perception of Security and Privacy: Assessing Knowledge, Collecting Evidence,
Translating Research into Action” (Grant Agreement Number: 285635), 2015.'
date_created: 2023-02-28T02:01:25Z
date_updated: 2023-03-08T06:35:39Z
department:
- _id: '136'
extern: '1'
language:
- iso: eng
status: public
title: 'Validation Report. Deliverable D5.3 of the EU FP7 project “PACT – Public Perception
of Security and Privacy: Assessing Knowledge, Collecting Evidence, Translating Research
into Action” (grant agreement number: 285635)'
type: report
user_id: '49063'
year: '2015'
...
---
_id: '29020'
author:
- first_name: Jens
full_name: Lehmann, Jens
last_name: Lehmann
- first_name: Spiros
full_name: Athanasiou, Spiros
last_name: Athanasiou
- first_name: Andreas
full_name: Both, Andreas
last_name: Both
- first_name: Alejandra
full_name: Garcia-Rojas, Alejandra
last_name: Garcia-Rojas
- first_name: Giorgos
full_name: Giannopoulos, Giorgos
last_name: Giannopoulos
- first_name: Daniel
full_name: Hladky, Daniel
last_name: Hladky
- first_name: Konrad
full_name: Hoeffner, Konrad
last_name: Hoeffner
- first_name: Jon
full_name: Jay Le Grange, Jon
last_name: Jay Le Grange
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
- first_name: Mohamed
full_name: Sherif, Mohamed
id: '67234'
last_name: Sherif
orcid: https://orcid.org/0000-0002-9927-2203
- first_name: Claus
full_name: Stadler, Claus
last_name: Stadler
- first_name: Matthias
full_name: Wauer, Matthias
last_name: Wauer
- first_name: Patrick
full_name: Westphal, Patrick
last_name: Westphal
- first_name: Vadim
full_name: Zaslawski, Vadim
last_name: Zaslawski
citation:
ama: 'Lehmann J, Athanasiou S, Both A, et al. Managing Geospatial Linked Data in
the GeoKnow Project. In: The Semantic Web in Earth and Space Science. Current
Status and Future Directions. Vol Volume 20. Studies on the Semantic Web .
IOS Press; 2015:51–78. doi:
10.3233/978-1-61499-501-2-51'
apa: 'Lehmann, J., Athanasiou, S., Both, A., Garcia-Rojas, A., Giannopoulos, G.,
Hladky, D., Hoeffner, K., Jay Le Grange, J., Ngonga Ngomo, A.-C., Sherif, M.,
Stadler, C., Wauer, M., Westphal, P., & Zaslawski, V. (2015). Managing Geospatial
Linked Data in the GeoKnow Project. In The Semantic Web in Earth and Space
Science. Current Status and Future Directions: Vol. Volume 20 (pp. 51–78).
IOS Press. https://doi.org/
10.3233/978-1-61499-501-2-51'
bibtex: '@inbook{Lehmann_Athanasiou_Both_Garcia-Rojas_Giannopoulos_Hladky_Hoeffner_Jay
Le Grange_Ngonga Ngomo_Sherif_et al._2015, series={Studies on the Semantic Web
}, title={Managing Geospatial Linked Data in the GeoKnow Project}, volume={Volume
20}, DOI={ 10.3233/978-1-61499-501-2-51},
booktitle={The Semantic Web in Earth and Space Science. Current Status and Future
Directions}, publisher={IOS Press}, author={Lehmann, Jens and Athanasiou, Spiros
and Both, Andreas and Garcia-Rojas, Alejandra and Giannopoulos, Giorgos and Hladky,
Daniel and Hoeffner, Konrad and Jay Le Grange, Jon and Ngonga Ngomo, Axel-Cyrille
and Sherif, Mohamed and et al.}, year={2015}, pages={51–78}, collection={Studies
on the Semantic Web } }'
chicago: Lehmann, Jens, Spiros Athanasiou, Andreas Both, Alejandra Garcia-Rojas,
Giorgos Giannopoulos, Daniel Hladky, Konrad Hoeffner, et al. “Managing Geospatial
Linked Data in the GeoKnow Project.” In The Semantic Web in Earth and Space
Science. Current Status and Future Directions, Volume 20:51–78. Studies on
the Semantic Web . IOS Press, 2015. https://doi.org/
10.3233/978-1-61499-501-2-51.
ieee: J. Lehmann et al., “Managing Geospatial Linked Data in the GeoKnow
Project,” in The Semantic Web in Earth and Space Science. Current Status and
Future Directions, vol. Volume 20, IOS Press, 2015, pp. 51–78.
mla: Lehmann, Jens, et al. “Managing Geospatial Linked Data in the GeoKnow Project.”
The Semantic Web in Earth and Space Science. Current Status and Future Directions,
vol. Volume 20, IOS Press, 2015, pp. 51–78, doi:
10.3233/978-1-61499-501-2-51.
short: 'J. Lehmann, S. Athanasiou, A. Both, A. Garcia-Rojas, G. Giannopoulos, D.
Hladky, K. Hoeffner, J. Jay Le Grange, A.-C. Ngonga Ngomo, M. Sherif, C. Stadler,
M. Wauer, P. Westphal, V. Zaslawski, in: The Semantic Web in Earth and Space Science.
Current Status and Future Directions, IOS Press, 2015, pp. 51–78.'
date_created: 2021-12-17T09:56:31Z
date_updated: 2023-08-16T09:42:23Z
doi: ' 10.3233/978-1-61499-501-2-51'
keyword:
- 2015 group\_aksw sys:relevantFor:infai sys:relevantFor:bis sys:relevantFor:geoknow
lehmann ngonga MOLE sherif simba dice hoeffner geoknow wauer westphal
language:
- iso: eng
page: 51–78
publication: The Semantic Web in Earth and Space Science. Current Status and Future
Directions
publisher: IOS Press
series_title: 'Studies on the Semantic Web '
status: public
title: Managing Geospatial Linked Data in the GeoKnow Project
type: book_chapter
user_id: '67234'
volume: ' Volume 20'
year: '2015'
...
---
_id: '1773'
author:
- first_name: Jörn
full_name: Schumacher, Jörn
last_name: Schumacher
- first_name: J.
full_name: T. Anderson, J.
last_name: T. Anderson
- first_name: A.
full_name: Borga, A.
last_name: Borga
- first_name: H.
full_name: Boterenbrood, H.
last_name: Boterenbrood
- first_name: H.
full_name: Chen, H.
last_name: Chen
- first_name: K.
full_name: Chen, K.
last_name: Chen
- first_name: G.
full_name: Drake, G.
last_name: Drake
- first_name: D.
full_name: Francis, D.
last_name: Francis
- first_name: B.
full_name: Gorini, B.
last_name: Gorini
- first_name: F.
full_name: Lanni, F.
last_name: Lanni
- first_name: Giovanna
full_name: Lehmann-Miotto, Giovanna
last_name: Lehmann-Miotto
- first_name: L.
full_name: Levinson, L.
last_name: Levinson
- first_name: J.
full_name: Narevicius, J.
last_name: Narevicius
- first_name: Christian
full_name: Plessl, Christian
id: '16153'
last_name: Plessl
orcid: 0000-0001-5728-9982
- first_name: A.
full_name: Roich, A.
last_name: Roich
- first_name: S.
full_name: Ryu, S.
last_name: Ryu
- first_name: F.
full_name: P. Schreuder, F.
last_name: P. Schreuder
- first_name: Wainer
full_name: Vandelli, Wainer
last_name: Vandelli
- first_name: J.
full_name: Vermeulen, J.
last_name: Vermeulen
- first_name: J.
full_name: Zhang, J.
last_name: Zhang
citation:
ama: 'Schumacher J, T. Anderson J, Borga A, et al. Improving Packet Processing Performance
in the ATLAS FELIX Project – Analysis and Optimization of a Memory-Bounded Algorithm.
In: Proc. Int. Conf. on Distributed Event-Based Systems (DEBS). ACM; 2015.
doi:10.1145/2675743.2771824'
apa: Schumacher, J., T. Anderson, J., Borga, A., Boterenbrood, H., Chen, H., Chen,
K., Drake, G., Francis, D., Gorini, B., Lanni, F., Lehmann-Miotto, G., Levinson,
L., Narevicius, J., Plessl, C., Roich, A., Ryu, S., P. Schreuder, F., Vandelli,
W., Vermeulen, J., & Zhang, J. (2015). Improving Packet Processing Performance
in the ATLAS FELIX Project – Analysis and Optimization of a Memory-Bounded Algorithm.
Proc. Int. Conf. on Distributed Event-Based Systems (DEBS). https://doi.org/10.1145/2675743.2771824
bibtex: '@inproceedings{Schumacher_T. Anderson_Borga_Boterenbrood_Chen_Chen_Drake_Francis_Gorini_Lanni_et
al._2015, title={Improving Packet Processing Performance in the ATLAS FELIX Project
– Analysis and Optimization of a Memory-Bounded Algorithm}, DOI={10.1145/2675743.2771824},
booktitle={Proc. Int. Conf. on Distributed Event-Based Systems (DEBS)}, publisher={ACM},
author={Schumacher, Jörn and T. Anderson, J. and Borga, A. and Boterenbrood, H.
and Chen, H. and Chen, K. and Drake, G. and Francis, D. and Gorini, B. and Lanni,
F. and et al.}, year={2015} }'
chicago: Schumacher, Jörn, J. T. Anderson, A. Borga, H. Boterenbrood, H. Chen, K.
Chen, G. Drake, et al. “Improving Packet Processing Performance in the ATLAS FELIX
Project – Analysis and Optimization of a Memory-Bounded Algorithm.” In Proc.
Int. Conf. on Distributed Event-Based Systems (DEBS). ACM, 2015. https://doi.org/10.1145/2675743.2771824.
ieee: 'J. Schumacher et al., “Improving Packet Processing Performance in
the ATLAS FELIX Project – Analysis and Optimization of a Memory-Bounded Algorithm,”
2015, doi: 10.1145/2675743.2771824.'
mla: Schumacher, Jörn, et al. “Improving Packet Processing Performance in the ATLAS
FELIX Project – Analysis and Optimization of a Memory-Bounded Algorithm.” Proc.
Int. Conf. on Distributed Event-Based Systems (DEBS), ACM, 2015, doi:10.1145/2675743.2771824.
short: 'J. Schumacher, J. T. Anderson, A. Borga, H. Boterenbrood, H. Chen, K. Chen,
G. Drake, D. Francis, B. Gorini, F. Lanni, G. Lehmann-Miotto, L. Levinson, J.
Narevicius, C. Plessl, A. Roich, S. Ryu, F. P. Schreuder, W. Vandelli, J. Vermeulen,
J. Zhang, in: Proc. Int. Conf. on Distributed Event-Based Systems (DEBS), ACM,
2015.'
date_created: 2018-03-23T14:09:33Z
date_updated: 2023-09-26T13:31:01Z
department:
- _id: '27'
- _id: '518'
- _id: '78'
doi: 10.1145/2675743.2771824
language:
- iso: eng
publication: Proc. Int. Conf. on Distributed Event-Based Systems (DEBS)
publisher: ACM
quality_controlled: '1'
status: public
title: Improving Packet Processing Performance in the ATLAS FELIX Project – Analysis
and Optimization of a Memory-Bounded Algorithm
type: conference
user_id: '15278'
year: '2015'
...
---
_id: '35491'
abstract:
- lang: eng
text: Im Hinblick auf die Verbesserung der Lehrerbildung besteht ein hohes Interesse
daran, die Struktur und Genese der Kompetenzen von Lehramtsstudierenden zu beschreiben.
Die Ziele des vorgestellten Projekts liegen in der Modellierung und Messung domänenspezifischer
und generischer Kompetenzen, die Lehramtsstudierende der Physik im Hochschulstudium
erwerben sollen. Das Modell umfasst differenzierte Facetten des physikalischen
Fachwissens und des physikdidaktischen Wissens sowie das fachspezifische Erklärungswissen
in unterrichtsnahen Vermittlungssituationen. Es enthält zudem Annahmen über Zusammenhänge
dieser Bereiche des Professionswissens. Ausgehend vom Modell wurden schriftliche
Testinstrumente und videografierte Lehr-Lern-Rollenspiele entwickelt und bei Physik-Lehramtsstudierenden
eingesetzt. Die Ergebnisse sprechen für die Validität der genutzten Testverfahren.
(DIPF/Orig.)
- lang: eng
text: For improving teacher education, there has been an increasing interest in
describing teachers' professional competencies and their development in the course
of implementing educational programs. The focus of the reported project is on
modeling and measuring domain-specific and generic competencies that future physics
teachers acquire during their university studies. The model comprises characteristics
and relationships between physics content knowledge, pedagogical content knowledge,
and skills for explaining physics phenomena. Based on the model, assessment instruments
were developed and applied as paper-and-pencil-tests and videotaped expert-novice
dialogues for measuring the competencies in a large sample of physics student
teachers. Trials and validation suggest that the instruments are valid in terms
of content and construct validities. (DIPF/Orig.)
author:
- first_name: Josef
full_name: Riese, Josef
id: '429'
last_name: Riese
orcid: 0000-0003-2927-2619
- first_name: Christoph
full_name: Kulgemeyer, Christoph
id: '84533'
last_name: Kulgemeyer
- first_name: Simon
full_name: Zander, Simon
last_name: Zander
- first_name: Andreas
full_name: Borowski, Andreas
last_name: Borowski
- first_name: Hans E.
full_name: Fischer, Hans E.
last_name: Fischer
- first_name: Yvonne
full_name: Gramzow, Yvonne
id: '9605'
last_name: Gramzow
- first_name: Peter
full_name: Reinhold, Peter
id: '416'
last_name: Reinhold
- first_name: Horst
full_name: Schecker, Horst
last_name: Schecker
- first_name: Elisabeth
full_name: Tomczyszyn, Elisabeth
last_name: Tomczyszyn
citation:
ama: 'Riese J, Kulgemeyer C, Zander S, et al. Modellierung und Messung des Professionswissens
in der Lehramtsausbildung Physik. In: Blömeke S, Zlatkin-Troitschanskaia O, eds.
Kompetenzen von Studierenden: 61. Beiheft der Zeitschrift für Pädagogik.
Belz; 2015:55-79. doi:10.25656/01:15503'
apa: 'Riese, J., Kulgemeyer, C., Zander, S., Borowski, A., Fischer, H. E., Gramzow,
Y., Reinhold, P., Schecker, H., & Tomczyszyn, E. (2015). Modellierung und
Messung des Professionswissens in der Lehramtsausbildung Physik. In S. Blömeke
& O. Zlatkin-Troitschanskaia (Eds.), Kompetenzen von Studierenden: 61.
Beiheft der Zeitschrift für Pädagogik (pp. 55–79). Belz. https://doi.org/10.25656/01:15503'
bibtex: '@inbook{Riese_Kulgemeyer_Zander_Borowski_Fischer_Gramzow_Reinhold_Schecker_Tomczyszyn_2015,
place={Weinheim}, title={Modellierung und Messung des Professionswissens in der
Lehramtsausbildung Physik}, DOI={10.25656/01:15503},
booktitle={Kompetenzen von Studierenden: 61. Beiheft der Zeitschrift für Pädagogik},
publisher={Belz}, author={Riese, Josef and Kulgemeyer, Christoph and Zander, Simon
and Borowski, Andreas and Fischer, Hans E. and Gramzow, Yvonne and Reinhold, Peter
and Schecker, Horst and Tomczyszyn, Elisabeth}, editor={Blömeke, Sigrid and Zlatkin-Troitschanskaia,
Olga}, year={2015}, pages={55–79} }'
chicago: 'Riese, Josef, Christoph Kulgemeyer, Simon Zander, Andreas Borowski, Hans
E. Fischer, Yvonne Gramzow, Peter Reinhold, Horst Schecker, and Elisabeth Tomczyszyn.
“Modellierung und Messung des Professionswissens in der Lehramtsausbildung Physik.”
In Kompetenzen von Studierenden: 61. Beiheft der Zeitschrift für Pädagogik,
edited by Sigrid Blömeke and Olga Zlatkin-Troitschanskaia, 55–79. Weinheim: Belz,
2015. https://doi.org/10.25656/01:15503.'
ieee: 'J. Riese et al., “Modellierung und Messung des Professionswissens
in der Lehramtsausbildung Physik,” in Kompetenzen von Studierenden: 61. Beiheft
der Zeitschrift für Pädagogik, S. Blömeke and O. Zlatkin-Troitschanskaia,
Eds. Weinheim: Belz, 2015, pp. 55–79.'
mla: 'Riese, Josef, et al. “Modellierung und Messung des Professionswissens in der
Lehramtsausbildung Physik.” Kompetenzen von Studierenden: 61. Beiheft der Zeitschrift
für Pädagogik, edited by Sigrid Blömeke and Olga Zlatkin-Troitschanskaia,
Belz, 2015, pp. 55–79, doi:10.25656/01:15503.'
short: 'J. Riese, C. Kulgemeyer, S. Zander, A. Borowski, H.E. Fischer, Y. Gramzow,
P. Reinhold, H. Schecker, E. Tomczyszyn, in: S. Blömeke, O. Zlatkin-Troitschanskaia
(Eds.), Kompetenzen von Studierenden: 61. Beiheft der Zeitschrift für Pädagogik,
Belz, Weinheim, 2015, pp. 55–79.'
date_created: 2023-01-09T13:48:46Z
date_updated: 2025-06-17T10:16:53Z
department:
- _id: '299'
doi: 10.25656/01:15503
editor:
- first_name: Sigrid
full_name: Blömeke, Sigrid
last_name: Blömeke
- first_name: Olga
full_name: Zlatkin-Troitschanskaia, Olga
last_name: Zlatkin-Troitschanskaia
language:
- iso: ger
page: 55-79
place: Weinheim
publication: 'Kompetenzen von Studierenden: 61. Beiheft der Zeitschrift für Pädagogik'
publisher: Belz
status: public
title: Modellierung und Messung des Professionswissens in der Lehramtsausbildung Physik
type: book_chapter
user_id: '429'
year: '2015'
...
---
_id: '25596'
author:
- first_name: Thomas
full_name: Gutfeld, Thomas
last_name: Gutfeld
- first_name: Ulrich
full_name: Jessen, Ulrich
last_name: Jessen
- first_name: Sigrid
full_name: Wenzel, Sigrid
last_name: Wenzel
- first_name: Christoph
full_name: Laroque, Christoph
last_name: Laroque
- first_name: Jens
full_name: Weber, Jens
last_name: Weber
citation:
ama: 'Gutfeld T, Jessen U, Wenzel S, Laroque C, Weber J. A Technical Concept for
Plant Engineering by Simulation-Based and Logistic-Integrated Project Management.
In: Tolk A, Diallo SY, Ryzhov IO, Yilmaz L, Buckley S, Miller JA, eds. Proceedings
of the 2014 Winter Simulation Conference. IEEE; 2014.'
apa: Gutfeld, T., Jessen, U., Wenzel, S., Laroque, C., & Weber, J. (2014). A
Technical Concept for Plant Engineering by Simulation-Based and Logistic-Integrated
Project Management. In A. Tolk, S. Y. Diallo, I. O. Ryzhov, L. Yilmaz, S. Buckley,
& J. A. Miller (Eds.), Proceedings of the 2014 Winter Simulation Conference.
IEEE.
bibtex: '@inproceedings{Gutfeld_Jessen_Wenzel_Laroque_Weber_2014, title={A Technical
Concept for Plant Engineering by Simulation-Based and Logistic-Integrated Project
Management}, booktitle={Proceedings of the 2014 Winter Simulation Conference},
publisher={IEEE}, author={Gutfeld, Thomas and Jessen, Ulrich and Wenzel, Sigrid
and Laroque, Christoph and Weber, Jens}, editor={Tolk, A and Diallo, S. Y and
Ryzhov, I. O and Yilmaz, L and Buckley, S and Miller, J. A}, year={2014} }'
chicago: Gutfeld, Thomas, Ulrich Jessen, Sigrid Wenzel, Christoph Laroque, and Jens
Weber. “A Technical Concept for Plant Engineering by Simulation-Based and Logistic-Integrated
Project Management.” In Proceedings of the 2014 Winter Simulation Conference,
edited by A Tolk, S. Y Diallo, I. O Ryzhov, L Yilmaz, S Buckley, and J. A Miller.
IEEE, 2014.
ieee: T. Gutfeld, U. Jessen, S. Wenzel, C. Laroque, and J. Weber, “A Technical Concept
for Plant Engineering by Simulation-Based and Logistic-Integrated Project Management,”
in Proceedings of the 2014 Winter Simulation Conference, 2014.
mla: Gutfeld, Thomas, et al. “A Technical Concept for Plant Engineering by Simulation-Based
and Logistic-Integrated Project Management.” Proceedings of the 2014 Winter
Simulation Conference, edited by A Tolk et al., IEEE, 2014.
short: 'T. Gutfeld, U. Jessen, S. Wenzel, C. Laroque, J. Weber, in: A. Tolk, S.Y. Diallo,
I.O. Ryzhov, L. Yilmaz, S. Buckley, J.A. Miller (Eds.), Proceedings of the 2014
Winter Simulation Conference, IEEE, 2014.'
date_created: 2021-10-06T16:02:47Z
date_updated: 2022-01-06T06:57:07Z
department:
- _id: '671'
editor:
- first_name: A
full_name: Tolk, A
last_name: Tolk
- first_name: S. Y
full_name: ' Diallo, S. Y'
last_name: ' Diallo'
- first_name: I. O
full_name: Ryzhov, I. O
last_name: Ryzhov
- first_name: L
full_name: Yilmaz, L
last_name: Yilmaz
- first_name: S
full_name: Buckley, S
last_name: Buckley
- first_name: J. A
full_name: ' Miller, J. A'
last_name: ' Miller'
language:
- iso: eng
publication: Proceedings of the 2014 Winter Simulation Conference
publication_status: published
publisher: IEEE
status: public
title: A Technical Concept for Plant Engineering by Simulation-Based and Logistic-Integrated
Project Management
type: conference
user_id: '71124'
year: '2014'
...
---
_id: '2629'
author:
- first_name: B.
full_name: Heinrich, B.
last_name: Heinrich
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
- first_name: Steffen
full_name: Zimmermann, Steffen
last_name: Zimmermann
citation:
ama: Heinrich B, Kundisch D, Zimmermann S. Analyzing Cost and Risk Interaction Effects
in IT Project Portfolios. BIT - Banking and Information Technology. 2014;15(2):8-20.
apa: Heinrich, B., Kundisch, D., & Zimmermann, S. (2014). Analyzing Cost and
Risk Interaction Effects in IT Project Portfolios. BIT - Banking and Information
Technology, 15(2), 8–20.
bibtex: '@article{Heinrich_Kundisch_Zimmermann_2014, title={Analyzing Cost and Risk
Interaction Effects in IT Project Portfolios}, volume={15}, number={2}, journal={BIT
- Banking and Information Technology}, author={Heinrich, B. and Kundisch, Dennis
and Zimmermann, Steffen}, year={2014}, pages={8–20} }'
chicago: 'Heinrich, B., Dennis Kundisch, and Steffen Zimmermann. “Analyzing Cost
and Risk Interaction Effects in IT Project Portfolios.” BIT - Banking and Information
Technology 15, no. 2 (2014): 8–20.'
ieee: B. Heinrich, D. Kundisch, and S. Zimmermann, “Analyzing Cost and Risk Interaction
Effects in IT Project Portfolios,” BIT - Banking and Information Technology,
vol. 15, no. 2, pp. 8–20, 2014.
mla: Heinrich, B., et al. “Analyzing Cost and Risk Interaction Effects in IT Project
Portfolios.” BIT - Banking and Information Technology, vol. 15, no. 2,
2014, pp. 8–20.
short: B. Heinrich, D. Kundisch, S. Zimmermann, BIT - Banking and Information Technology
15 (2014) 8–20.
date_created: 2018-05-03T14:50:31Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '276'
intvolume: ' 15'
issue: '2'
language:
- iso: eng
page: 8-20
publication: BIT - Banking and Information Technology
publication_status: published
status: public
title: Analyzing Cost and Risk Interaction Effects in IT Project Portfolios
type: journal_article
user_id: '16205'
volume: 15
year: '2014'
...
---
_id: '1140'
abstract:
- lang: eng
text: Customized planning, engineering and build-up of factory plants are very complex
tasks, where project management contains lots of risks and uncertainties. Existing
simulation techniques could help massively to evaluate these uncertainties and
achieve improved and at least more robust plans during project management, but
are typically not applied in industry, especially at SMEs (small and medium-sized
enterprises). This paper presents some results of the joint research project simject
of the Universities of Paderborn and Kassel, which aims at the development of
a demonstrator for a simulation-based and logistic-integrated project planning
and scheduling. Based on the researched state-of-the-art, requirements and a planning
process are derived and described, as well as a draft of the current technical
infrastructure of the intended modular prototype. First plug-ins for project simulation
and multi-project optimization are implemented and already show possible benefits
for the project management process.
author:
- first_name: Thomas
full_name: Gutfeld, Thomas
last_name: Gutfeld
- first_name: Ulrich
full_name: Jessen, Ulrich
last_name: Jessen
- first_name: Sigrid
full_name: Wenzel, Sigrid
last_name: Wenzel
- first_name: Jens
full_name: Weber, Jens
last_name: Weber
citation:
ama: 'Gutfeld T, Jessen U, Wenzel S, Weber J. A Technical Concept for Plant Engineering
by Simulation-Based and Logistic-Integrated Project Management. In: Tolk A, Diallo
SY, Ryzhov IO, Yilmaz L, Buckley SJ, Miller JA, eds. Proceedings of the 2014
Winter Simulation Conference. Piscataway, NJ: IEEE Press; 2014:3423-3434.
doi:10.1109/WSC.2014.7020175'
apa: 'Gutfeld, T., Jessen, U., Wenzel, S., & Weber, J. (2014). A Technical Concept
for Plant Engineering by Simulation-Based and Logistic-Integrated Project Management.
In A. Tolk, S. Y. Diallo, I. O. Ryzhov, L. Yilmaz, S. J. Buckley, & J. A.
Miller (Eds.), Proceedings of the 2014 Winter Simulation Conference (pp.
3423–3434). Piscataway, NJ: IEEE Press. https://doi.org/10.1109/WSC.2014.7020175'
bibtex: '@inproceedings{Gutfeld_Jessen_Wenzel_Weber_2014, place={Piscataway, NJ},
title={A Technical Concept for Plant Engineering by Simulation-Based and Logistic-Integrated
Project Management}, DOI={10.1109/WSC.2014.7020175},
booktitle={Proceedings of the 2014 Winter Simulation Conference}, publisher={IEEE
Press}, author={Gutfeld, Thomas and Jessen, Ulrich and Wenzel, Sigrid and Weber,
Jens}, editor={Tolk, Andreas and Diallo, Saikou Y. and Ryzhov, Ilya O. and Yilmaz,
Levent and Buckley, Stephen J. and Miller, John A.Editors}, year={2014}, pages={3423–3434}
}'
chicago: 'Gutfeld, Thomas, Ulrich Jessen, Sigrid Wenzel, and Jens Weber. “A Technical
Concept for Plant Engineering by Simulation-Based and Logistic-Integrated Project
Management.” In Proceedings of the 2014 Winter Simulation Conference, edited
by Andreas Tolk, Saikou Y. Diallo, Ilya O. Ryzhov, Levent Yilmaz, Stephen J.
Buckley, and John A. Miller, 3423–34. Piscataway, NJ: IEEE Press, 2014. https://doi.org/10.1109/WSC.2014.7020175.'
ieee: T. Gutfeld, U. Jessen, S. Wenzel, and J. Weber, “A Technical Concept for Plant
Engineering by Simulation-Based and Logistic-Integrated Project Management,” in
Proceedings of the 2014 Winter Simulation Conference, Savannah, GA, USA,
2014, pp. 3423–3434.
mla: Gutfeld, Thomas, et al. “A Technical Concept for Plant Engineering by Simulation-Based
and Logistic-Integrated Project Management.” Proceedings of the 2014 Winter
Simulation Conference, edited by Andreas Tolk et al., IEEE Press, 2014, pp.
3423–34, doi:10.1109/WSC.2014.7020175.
short: 'T. Gutfeld, U. Jessen, S. Wenzel, J. Weber, in: A. Tolk, S.Y. Diallo, I.O.
Ryzhov, L. Yilmaz, S.J. Buckley, J.A. Miller (Eds.), Proceedings of the 2014 Winter
Simulation Conference, IEEE Press, Piscataway, NJ, 2014, pp. 3423–3434.'
conference:
end_date: 2014-12-10
location: Savannah, GA, USA
name: 2014 Winter Simulation Conference (WSC '14)
start_date: 2014-12-07
date_created: 2018-01-31T09:14:56Z
date_updated: 2022-01-06T06:51:00Z
department:
- _id: '36'
- _id: '1'
- _id: '579'
doi: 10.1109/WSC.2014.7020175
editor:
- first_name: 'Andreas '
full_name: 'Tolk, Andreas '
last_name: Tolk
- first_name: Saikou Y.
full_name: Diallo, Saikou Y.
last_name: Diallo
- first_name: Ilya O.
full_name: Ryzhov, Ilya O.
last_name: Ryzhov
- first_name: Levent
full_name: Yilmaz, Levent
last_name: Yilmaz
- first_name: Stephen J.
full_name: Buckley, Stephen J.
last_name: Buckley
- first_name: John A.
full_name: Miller, John A.
last_name: Miller
language:
- iso: eng
page: 3423-3434
place: Piscataway, NJ
publication: Proceedings of the 2014 Winter Simulation Conference
publication_identifier:
isbn:
- '9781479974863'
publication_status: published
publisher: IEEE Press
status: public
title: A Technical Concept for Plant Engineering by Simulation-Based and Logistic-Integrated
Project Management
type: conference
user_id: '13929'
year: '2014'
...
---
_id: '22384'
abstract:
- lang: eng
text: 'Additive Manufacturing technologies create parts layer by layer. Thereby,
lots of benefits are offered. Especially extended design freedoms provide new
potentials for the design of technical parts. To make these benefits accessible
to different user groups, design rules for Additive Manufacturing were developed
within the project ‘‘Direct Manufacturing Design Rules’’. Therefore a process
independent method was defined first. Next, design rules were developed for Laser
Sintering, Laser Melting and Fused Deposition Modeling. The results were summarized
in a design rule catalog and support a suitable design for Additive Manufacturing '
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Adam G, Zimmer D. Design for Additive Manufacturing - Element transitions and
aggregated structures. CIRP Journal of Manufacturing Science and Technology.
2014;7(1):20-28. doi:10.1016/j.cirpj.2013.10.001
apa: Adam, G., & Zimmer, D. (2014). Design for Additive Manufacturing - Element
transitions and aggregated structures. CIRP Journal of Manufacturing Science
and Technology, 7(1), 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001
bibtex: '@article{Adam_Zimmer_2014, title={Design for Additive Manufacturing - Element
transitions and aggregated structures}, volume={7}, DOI={10.1016/j.cirpj.2013.10.001 }, number={1}, journal={CIRP Journal of Manufacturing
Science and Technology}, author={Adam, Guido and Zimmer, Detmar}, year={2014},
pages={20–28} }'
chicago: 'Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element
Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science
and Technology 7, no. 1 (2014): 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001 .'
ieee: G. Adam and D. Zimmer, “Design for Additive Manufacturing - Element transitions
and aggregated structures,” CIRP Journal of Manufacturing Science and Technology,
vol. 7, no. 1, pp. 20–28, 2014.
mla: Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element
Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science
and Technology, vol. 7, no. 1, 2014, pp. 20–28, doi:10.1016/j.cirpj.2013.10.001 .
short: G. Adam, D. Zimmer, CIRP Journal of Manufacturing Science and Technology
7 (2014) 20–28.
date_created: 2021-06-15T11:09:08Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: '10.1016/j.cirpj.2013.10.001 '
intvolume: ' 7'
issue: '1'
language:
- iso: eng
page: 20-28
publication: CIRP Journal of Manufacturing Science and Technology
status: public
title: Design for Additive Manufacturing - Element transitions and aggregated structures
type: journal_article
user_id: '38077'
volume: 7
year: '2014'
...
---
_id: '8065'
abstract:
- lang: eng
text: Software engineering methods are used to prescribe and coordinate the tasks
necessary to plan, build, deliver, and maintain software. There is a broad consensus
that there is no one-size-fits-all method and that, e.g., agile and plan-driven
approaches have to be mixed sometimes, based on the context of a project. Creating
these so-called situational methods and assuring that they cover all necessary
details consistently is a challenge. There is also the challenge for the project
teams to follow methods as prescribed by the method engineer. Our approach supports
the creation of consistent situational methods from a repository of pre-existing
building blocks. Moreover, we present means to enact these methods with standard
BPEL/BPEL4People workflow engines, automating the coordination of tasks and providing
guidance for them.
author:
- first_name: Masud
full_name: Fazal-Baqaie, Masud
last_name: Fazal-Baqaie
- first_name: Christian
full_name: Gerth, Christian
last_name: Gerth
- first_name: Gregor
full_name: Engels, Gregor
id: '107'
last_name: Engels
citation:
ama: 'Fazal-Baqaie M, Gerth C, Engels G. Breathing Life into Situational Software
Engineering Methods. In: In Proceedings of the 15th International Conference
of Product Focused Software Development and Process Improvement (PROFES 2014).
Vol 8892. Springer; 2014:281-284.'
apa: Fazal-Baqaie, M., Gerth, C., & Engels, G. (2014). Breathing Life into Situational
Software Engineering Methods. In In Proceedings of the 15th International Conference
of Product Focused Software Development and Process Improvement (PROFES 2014)
(Vol. 8892, pp. 281–284). Springer.
bibtex: '@inproceedings{Fazal-Baqaie_Gerth_Engels_2014, title={Breathing Life into
Situational Software Engineering Methods}, volume={8892}, booktitle={In Proceedings
of the 15th International Conference of Product Focused Software Development and
Process Improvement (PROFES 2014)}, publisher={Springer}, author={Fazal-Baqaie,
Masud and Gerth, Christian and Engels, Gregor}, year={2014}, pages={281–284} }'
chicago: Fazal-Baqaie, Masud, Christian Gerth, and Gregor Engels. “Breathing Life
into Situational Software Engineering Methods.” In In Proceedings of the 15th
International Conference of Product Focused Software Development and Process Improvement
(PROFES 2014), 8892:281–84. Springer, 2014.
ieee: M. Fazal-Baqaie, C. Gerth, and G. Engels, “Breathing Life into Situational
Software Engineering Methods,” in In Proceedings of the 15th International
Conference of Product Focused Software Development and Process Improvement (PROFES
2014), 2014, vol. 8892, pp. 281–284.
mla: Fazal-Baqaie, Masud, et al. “Breathing Life into Situational Software Engineering
Methods.” In Proceedings of the 15th International Conference of Product Focused
Software Development and Process Improvement (PROFES 2014), vol. 8892, Springer,
2014, pp. 281–84.
short: 'M. Fazal-Baqaie, C. Gerth, G. Engels, in: In Proceedings of the 15th International
Conference of Product Focused Software Development and Process Improvement (PROFES
2014), Springer, 2014, pp. 281–284.'
date_created: 2019-02-21T21:15:04Z
date_updated: 2022-01-06T07:03:50Z
department:
- _id: '66'
intvolume: ' 8892'
language:
- iso: eng
page: 281-284
publication: In Proceedings of the 15th International Conference of Product Focused
Software Development and Process Improvement (PROFES 2014)
publisher: Springer
status: public
title: Breathing Life into Situational Software Engineering Methods
type: conference
user_id: '52534'
volume: 8892
year: '2014'
...
---
_id: '9895'
abstract:
- lang: eng
text: Power semiconductor modules are used to control and switch high electrical
currents and voltages. Within the power module package wire bonding is used as
an interconnection technology. In recent years, aluminum wire has been used preferably,
but an ever-growing market of powerful and efficient power modules requires a
material with better mechanical and electrical properties. For this reason, a
technology change from aluminum to copper is indispensable. However, the copper
wire bonding process reacts more sensitive to parameter changes. This makes manufacturing
reliable copper bond connections a challenging task. The aim of the BMBF funded
project Itsowl-InCuB is the development of self-optimizing techniques to enable
the reliable production of copper bond connections under varying conditions. A
model of the process is essential to achieve this aim. This model needs to include
the dynamic elasto-plastic deformation, the ultrasonic softening effect and the
proceeding adhesion between wire and substrate. This paper focusses on the pre-deformation
process. In the touchdown phase, the wire is pressed into the V-groove of the
tool and a small initial contact area between wire and substrate arise. The local
characteristics of the material change abruptly because of the cold forming. Consequently,
the pre-deformation has a strong effect on the joining process. In [1], a pre-cleaning
effect during the touchdown process of aluminum wires by cracking of oxide layers
was presented. These interactions of the process parameters are still largely
unknown for copper. In a first step, this paper validates the importance of modeling
the pre-deformation by showing its impact on the wire deformation characteristic
experimentally. Creating cross-section views of pre-deformed copper wires has
shown a low deformation degree compared to aluminum. By using a digital microscope
and a scanning confocal microscope an analysis about the contact areas and penetration
depths after touchdown has been made. Additionally, it has to be taken into account
that the dynamical touchdown force depends on the touchdown speed and the touchdown
force set in the bonding machine. In order to measure the overshoot in the force
signals, a strain gauge sensor has been used. Subsequently, the affecting factors
have been interpreted independently Furthermore, the material properties of copper
wire have been investigated with tensile tests and hardness measurements. In a
second step, the paper presents finite element models of the touchdown process
for source and destination bonds. These models take the measured overshoot in
the touchdown forces into account. A multi-linear, isotropic material model has
been selected to map the material properties of the copper. A validation of the
model with the experimental determined contact areas, normal pressures and penetration
depths reveals the high model quality. Thus, the simulation is able to calculate
and visualize the three dimensional pre-deformation with an integrated material
parameter of the wire if the touchdown parameters of the bonding machine are known.
Based on the calculated deformation degrees of wire and substrate, it is probably
possible to investigate the effect of the pre-deformation on the pre-cleaning
phase in the copper wire bonding.
author:
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Paul
full_name: Eichwald, Paul
last_name: Eichwald
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Florian
full_name: Eacock, Florian
last_name: Eacock
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
citation:
ama: 'Unger A, Sextro W, Althoff S, et al. Experimental and Numerical Simulation
Study of Pre-Deformed Heavy Copper Wire Wedge Bonds. In: Proceedings of the
47th International Symposium on Microelectronics (IMAPS). San Diego, CA, US;
2014:289-294.'
apa: Unger, A., Sextro, W., Althoff, S., Eichwald, P., Meyer, T., Eacock, F., &
Brökelmann, M. (2014). Experimental and Numerical Simulation Study of Pre-Deformed
Heavy Copper Wire Wedge Bonds. In Proceedings of the 47th International Symposium
on Microelectronics (IMAPS) (pp. 289–294). San Diego, CA, US.
bibtex: '@inproceedings{Unger_Sextro_Althoff_Eichwald_Meyer_Eacock_Brökelmann_2014,
place={San Diego, CA, US}, title={Experimental and Numerical Simulation Study
of Pre-Deformed Heavy Copper Wire Wedge Bonds}, booktitle={Proceedings of the
47th International Symposium on Microelectronics (IMAPS)}, author={Unger, Andreas
and Sextro, Walter and Althoff, Simon and Eichwald, Paul and Meyer, Tobias and
Eacock, Florian and Brökelmann, Michael}, year={2014}, pages={289–294} }'
chicago: Unger, Andreas, Walter Sextro, Simon Althoff, Paul Eichwald, Tobias Meyer,
Florian Eacock, and Michael Brökelmann. “Experimental and Numerical Simulation
Study of Pre-Deformed Heavy Copper Wire Wedge Bonds.” In Proceedings of the
47th International Symposium on Microelectronics (IMAPS), 289–94. San Diego,
CA, US, 2014.
ieee: A. Unger et al., “Experimental and Numerical Simulation Study of Pre-Deformed
Heavy Copper Wire Wedge Bonds,” in Proceedings of the 47th International Symposium
on Microelectronics (IMAPS), 2014, pp. 289–294.
mla: Unger, Andreas, et al. “Experimental and Numerical Simulation Study of Pre-Deformed
Heavy Copper Wire Wedge Bonds.” Proceedings of the 47th International Symposium
on Microelectronics (IMAPS), 2014, pp. 289–94.
short: 'A. Unger, W. Sextro, S. Althoff, P. Eichwald, T. Meyer, F. Eacock, M. Brökelmann,
in: Proceedings of the 47th International Symposium on Microelectronics (IMAPS),
San Diego, CA, US, 2014, pp. 289–294.'
date_created: 2019-05-20T13:35:09Z
date_updated: 2020-05-07T05:33:47Z
department:
- _id: '151'
keyword:
- pre-deformation
- copper wire bonding
- finite element model
language:
- iso: eng
page: 289-294
place: San Diego, CA, US
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: Proceedings of the 47th International Symposium on Microelectronics (IMAPS)
status: public
title: Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire
Wedge Bonds
type: conference
user_id: '210'
year: '2014'
...
---
_id: '13304'
abstract:
- lang: eng
text: A primary problem in multimedia content production is the plethora of formats
and the resulting multiple point-to-point transformation processes in different
content formatting specifications. However, these content transformation processes
can be conceptually broken down into a limited set of abstract principles. This
allows a unified approach that theoretically enables the transformation of any
given input channel into any desired output. Based on this principle, the present
article introduces the concept of Generic Content Transformation and the related
project MOCCA, which develops the corresponding software implementation of generic
content transformation for a variety of input and output channels. To balance
technical similarities with specific properties of different media channels, we
suggest a combination of an XML-based structure (MocML) and a high level authoring
environment. Generic Content Transformation further allows for novel means of
accessing assets via compound search algorithms. In the second part we summarize
and discuss current results and experiences in three scenarios of media production,
including mobile media.
author:
- first_name: Michael
full_name: Herzog, Michael
last_name: Herzog
- first_name: Matthias
full_name: Trier, Matthias
id: '72744'
last_name: Trier
citation:
ama: Herzog M, Trier M. MEDIA ENGINEERING WITH A CONTENT HUB SYSTEM. GENERIC CONTENT
TRANSFORMATION FOR MOBILE MEDIA. International Journal of Computing. 2014;7(2):108-115.
apa: Herzog, M., & Trier, M. (2014). MEDIA ENGINEERING WITH A CONTENT HUB SYSTEM.
GENERIC CONTENT TRANSFORMATION FOR MOBILE MEDIA. International Journal of Computing,
7(2), 108–115.
bibtex: '@article{Herzog_Trier_2014, title={MEDIA ENGINEERING WITH A CONTENT HUB
SYSTEM. GENERIC CONTENT TRANSFORMATION FOR MOBILE MEDIA}, volume={7}, number={2},
journal={International Journal of Computing}, author={Herzog, Michael and Trier,
Matthias}, year={2014}, pages={108–115} }'
chicago: 'Herzog, Michael, and Matthias Trier. “MEDIA ENGINEERING WITH A CONTENT
HUB SYSTEM. GENERIC CONTENT TRANSFORMATION FOR MOBILE MEDIA.” International
Journal of Computing 7, no. 2 (2014): 108–15.'
ieee: M. Herzog and M. Trier, “MEDIA ENGINEERING WITH A CONTENT HUB SYSTEM. GENERIC
CONTENT TRANSFORMATION FOR MOBILE MEDIA,” International Journal of Computing,
vol. 7, no. 2, pp. 108–115, 2014.
mla: Herzog, Michael, and Matthias Trier. “MEDIA ENGINEERING WITH A CONTENT HUB
SYSTEM. GENERIC CONTENT TRANSFORMATION FOR MOBILE MEDIA.” International Journal
of Computing, vol. 7, no. 2, 2014, pp. 108–15.
short: M. Herzog, M. Trier, International Journal of Computing 7 (2014) 108–115.
date_created: 2019-09-19T10:01:17Z
date_updated: 2022-01-06T06:51:32Z
department:
- _id: '198'
intvolume: ' 7'
issue: '2'
keyword:
- Multimedia Authoring
- Mobile Content
- Cross Media Production
- Content Engineering
- Media Retrieval
language:
- iso: eng
page: 108-115
publication: International Journal of Computing
publication_identifier:
issn:
- 2312-5381
status: public
title: MEDIA ENGINEERING WITH A CONTENT HUB SYSTEM. GENERIC CONTENT TRANSFORMATION
FOR MOBILE MEDIA
type: journal_article
user_id: '62809'
volume: 7
year: '2014'
...
---
_id: '35994'
author:
- first_name: Désirée
full_name: Laubenstein, Désirée
id: '52682'
last_name: Laubenstein
- first_name: D.
full_name: Scheer, D.
last_name: Scheer
citation:
ama: 'Laubenstein D, Scheer D. An inclusive school system in Rhineland-Palatinate?
Results of a research project and their relevance for international research on
inclusive education. In: ; 2014.'
apa: Laubenstein, D., & Scheer, D. (2014). An inclusive school system in
Rhineland-Palatinate? Results of a research project and their relevance for international
research on inclusive education. ECER-Tagung, Budapest.
bibtex: '@inproceedings{Laubenstein_Scheer_2014, title={An inclusive school system
in Rhineland-Palatinate? Results of a research project and their relevance for
international research on inclusive education.}, author={Laubenstein, Désirée
and Scheer, D.}, year={2014} }'
chicago: Laubenstein, Désirée, and D. Scheer. “An Inclusive School System in Rhineland-Palatinate?
Results of a Research Project and Their Relevance for International Research on
Inclusive Education.,” 2014.
ieee: D. Laubenstein and D. Scheer, “An inclusive school system in Rhineland-Palatinate?
Results of a research project and their relevance for international research on
inclusive education.,” presented at the ECER-Tagung, Budapest, 2014.
mla: Laubenstein, Désirée, and D. Scheer. An Inclusive School System in Rhineland-Palatinate?
Results of a Research Project and Their Relevance for International Research on
Inclusive Education. 2014.
short: 'D. Laubenstein, D. Scheer, in: 2014.'
conference:
end_date: 2014.09.11
location: Budapest
name: ECER-Tagung
start_date: 2014.09.08
date_created: 2023-01-11T10:48:38Z
date_updated: 2023-01-11T10:49:11Z
department:
- _id: '454'
extern: '1'
language:
- iso: eng
status: public
title: An inclusive school system in Rhineland-Palatinate? Results of a research project
and their relevance for international research on inclusive education.
type: conference
user_id: '58446'
year: '2014'
...
---
_id: '47592'
author:
- first_name: Gabriela
full_name: Jonas-Ahrend, Gabriela
id: '77633'
last_name: Jonas-Ahrend
orcid: 0000-0003-3898-954X
citation:
ama: 'Jonas-Ahrend G. The project virtual science fair for promoting inquiry learning.
In: Berlin DF, White AL, eds. Initiatives in Mathematics and Science Education
with Global Implications. International Consortium for Research in Science
and Mathematics Education; 2014:85-89.'
apa: Jonas-Ahrend, G. (2014). The project virtual science fair for promoting inquiry
learning. In D. F. Berlin & A. L. White (Eds.), Initiatives in mathematics
and science education with global implications (pp. 85–89). International
Consortium for Research in Science and Mathematics Education.
bibtex: '@inproceedings{Jonas-Ahrend_2014, place={Columbus, Ohio}, title={The project
virtual science fair for promoting inquiry learning}, booktitle={Initiatives in
mathematics and science education with global implications}, publisher={International
Consortium for Research in Science and Mathematics Education}, author={Jonas-Ahrend,
Gabriela}, editor={Berlin, D.F. and White, A.L.}, year={2014}, pages={85–89} }'
chicago: 'Jonas-Ahrend, Gabriela. “The Project Virtual Science Fair for Promoting
Inquiry Learning.” In Initiatives in Mathematics and Science Education with
Global Implications, edited by D.F. Berlin and A.L. White, 85–89. Columbus,
Ohio: International Consortium for Research in Science and Mathematics Education,
2014.'
ieee: G. Jonas-Ahrend, “The project virtual science fair for promoting inquiry learning,”
in Initiatives in mathematics and science education with global implications,
2014, pp. 85–89.
mla: Jonas-Ahrend, Gabriela. “The Project Virtual Science Fair for Promoting Inquiry
Learning.” Initiatives in Mathematics and Science Education with Global Implications,
edited by D.F. Berlin and A.L. White, International Consortium for Research in
Science and Mathematics Education, 2014, pp. 85–89.
short: 'G. Jonas-Ahrend, in: D.F. Berlin, A.L. White (Eds.), Initiatives in Mathematics
and Science Education with Global Implications, International Consortium for Research
in Science and Mathematics Education, Columbus, Ohio, 2014, pp. 85–89.'
date_created: 2023-10-04T15:01:26Z
date_updated: 2023-10-04T15:01:33Z
department:
- _id: '300'
editor:
- first_name: D.F.
full_name: Berlin, D.F.
last_name: Berlin
- first_name: A.L.
full_name: White, A.L.
last_name: White
extern: '1'
language:
- iso: eng
page: 85-89
place: Columbus, Ohio
publication: Initiatives in mathematics and science education with global implications
publisher: International Consortium for Research in Science and Mathematics Education
status: public
title: The project virtual science fair for promoting inquiry learning
type: conference
user_id: '77633'
year: '2014'
...
---
_id: '29028'
abstract:
- lang: eng
text: In the last couple of years the amount of structured open government data
has increased significantly. Already now, citizens are able to leverage the advantages
of open data through increased transparency and better opportunities to take part
in governmental decision making processes. Our approach increases the interoperability
of existing but distributed open governmental datasets by converting them to the
RDF-based NLP Interchange Format (NIF). Furthermore, we integrate the converted
data into a geodata store and present a user interface for querying this data
via a keyword-based search. The language resource generated in this project is
publicly available for download and via a dedicated SPARQL endpoint.
author:
- first_name: Mohamed
full_name: Sherif, Mohamed
id: '67234'
last_name: Sherif
orcid: https://orcid.org/0000-0002-9927-2203
- first_name: Sandro
full_name: Coelho, Sandro
last_name: Coelho
- first_name: Ricardo
full_name: Usbeck, Ricardo
last_name: Usbeck
- first_name: Sebastian
full_name: Hellmann, Sebastian
last_name: Hellmann
- first_name: Jens
full_name: Lehmann, Jens
last_name: Lehmann
- first_name: Martin
full_name: Brümmer, Martin
last_name: Brümmer
- first_name: Andreas
full_name: Both, Andreas
last_name: Both
citation:
ama: 'Sherif M, Coelho S, Usbeck R, et al. NIF4OGGD - NLP Interchange Format for
Open German Governmental Data. In: The 9th Edition of the Language Resources
and Evaluation Conference, 26-31 May, Reykjavik, Iceland. ; 2014.'
apa: Sherif, M., Coelho, S., Usbeck, R., Hellmann, S., Lehmann, J., Brümmer, M.,
& Both, A. (2014). NIF4OGGD - NLP Interchange Format for Open German Governmental
Data. The 9th Edition of the Language Resources and Evaluation Conference,
26-31 May, Reykjavik, Iceland.
bibtex: '@inproceedings{Sherif_Coelho_Usbeck_Hellmann_Lehmann_Brümmer_Both_2014,
title={NIF4OGGD - NLP Interchange Format for Open German Governmental Data}, booktitle={The
9th edition of the Language Resources and Evaluation Conference, 26-31 May, Reykjavik,
Iceland}, author={Sherif, Mohamed and Coelho, Sandro and Usbeck, Ricardo and Hellmann,
Sebastian and Lehmann, Jens and Brümmer, Martin and Both, Andreas}, year={2014}
}'
chicago: Sherif, Mohamed, Sandro Coelho, Ricardo Usbeck, Sebastian Hellmann, Jens
Lehmann, Martin Brümmer, and Andreas Both. “NIF4OGGD - NLP Interchange Format
for Open German Governmental Data.” In The 9th Edition of the Language Resources
and Evaluation Conference, 26-31 May, Reykjavik, Iceland, 2014.
ieee: M. Sherif et al., “NIF4OGGD - NLP Interchange Format for Open German
Governmental Data,” 2014.
mla: Sherif, Mohamed, et al. “NIF4OGGD - NLP Interchange Format for Open German
Governmental Data.” The 9th Edition of the Language Resources and Evaluation
Conference, 26-31 May, Reykjavik, Iceland, 2014.
short: 'M. Sherif, S. Coelho, R. Usbeck, S. Hellmann, J. Lehmann, M. Brümmer, A.
Both, in: The 9th Edition of the Language Resources and Evaluation Conference,
26-31 May, Reykjavik, Iceland, 2014.'
date_created: 2021-12-17T09:59:58Z
date_updated: 2023-08-16T09:19:54Z
keyword:
- 2014 dice simba sherif sys:relevantFor:infai sys:relevantFor:bis sys:relevantFor:geoknow
hellmann kilt lehmann usbeck bruemmer nif4oggd group\_aksw kilt Lidmole MOLE
language:
- iso: eng
publication: The 9th edition of the Language Resources and Evaluation Conference,
26-31 May, Reykjavik, Iceland
status: public
title: NIF4OGGD - NLP Interchange Format for Open German Governmental Data
type: conference
user_id: '67234'
year: '2014'
...
---
_id: '61027'
abstract:
- lang: eng
text: Parturition is one of the most important yet least observed events in studies
of primate life history and reproduction. Here, I report the first documented
observation of a bonobo (Pan paniscus) birth event in the wild, at the Luikotale
Bonobo Project field site, Democratic Republic of the Congo. The nulliparous mother’s
behaviour before, during and after parturition is described, along with reactions
of other community members to the birth and the neonate. Data were collected through
focal-animal observations, and the events postpartum were photo-documented. The
behaviour and spatial distribution of party members were recorded using scan samples.
Parturition occurred during the late morning in a social context, with parous
females in close proximity to the parturient mother. Placentophagia occurred immediately
after delivery, and the parturient shared the placenta with two of the attending
females. I compare this observation with reports of parturition in captive bonobos,
and highlight the observed female sociality and social support during the birth
event. Plausible adaptive advantages of parturition occurring in a social context
are discussed, and accrued observations of birth events in wild and free-ranging
primates suggest that females may give birth within proximity of others more frequently
than previously thought. This account contributes rare empirical data for examining
the interface between female sociality and parturition, and the evolution of parturitional
behaviours in primates.
article_type: original
author:
- first_name: Pamela Heidi
full_name: Douglas, Pamela Heidi
id: '72311'
last_name: Douglas
citation:
ama: Douglas PH. Female sociality during the daytime birth of a wild bonobo at Luikotale,
Democratic Republic of the Congo. Primates. 2014;55(4):533-542. doi:10.1007/s10329-014-0436-0
apa: Douglas, P. H. (2014). Female sociality during the daytime birth of a wild
bonobo at Luikotale, Democratic Republic of the Congo. Primates, 55(4),
533–542. https://doi.org/10.1007/s10329-014-0436-0
bibtex: '@article{Douglas_2014, title={Female sociality during the daytime birth
of a wild bonobo at Luikotale, Democratic Republic of the Congo}, volume={55},
DOI={10.1007/s10329-014-0436-0},
number={4}, journal={Primates}, publisher={Springer Science and Business Media
LLC}, author={Douglas, Pamela Heidi}, year={2014}, pages={533–542} }'
chicago: 'Douglas, Pamela Heidi. “Female Sociality during the Daytime Birth of a
Wild Bonobo at Luikotale, Democratic Republic of the Congo.” Primates 55,
no. 4 (2014): 533–42. https://doi.org/10.1007/s10329-014-0436-0.'
ieee: 'P. H. Douglas, “Female sociality during the daytime birth of a wild bonobo
at Luikotale, Democratic Republic of the Congo,” Primates, vol. 55, no.
4, pp. 533–542, 2014, doi: 10.1007/s10329-014-0436-0.'
mla: Douglas, Pamela Heidi. “Female Sociality during the Daytime Birth of a Wild
Bonobo at Luikotale, Democratic Republic of the Congo.” Primates, vol.
55, no. 4, Springer Science and Business Media LLC, 2014, pp. 533–42, doi:10.1007/s10329-014-0436-0.
short: P.H. Douglas, Primates 55 (2014) 533–542.
date_created: 2025-08-26T19:35:29Z
date_updated: 2025-08-26T19:53:09Z
department:
- _id: '40'
doi: 10.1007/s10329-014-0436-0
extern: '1'
intvolume: ' 55'
issue: '4'
keyword:
- Birth
- Pan paniscus
- Parturition
- Perinatal behaviour
- Placentophagia
- Female sociality
language:
- iso: eng
main_file_link:
- url: https://rdcu.be/eCzPP
page: 533-542
publication: Primates
publication_identifier:
issn:
- 0032-8332
- 1610-7365
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Female sociality during the daytime birth of a wild bonobo at Luikotale, Democratic
Republic of the Congo
type: journal_article
user_id: '72311'
volume: 55
year: '2014'
...
---
_id: '25273'
abstract:
- lang: eng
text: Automation and control systems include many “intelligent” automation devices,
which are usually implemented as complex embedded systems. New methods and tools
are demanded to cope with the increasing design complexity, while keeping the
project on schedule. Proper handling of nonfunctional system requirements is a
key factor during the design of industrial automation systems, since in some application
domains they are as important as (sometimes, more important than) functional requirements.
This paper presents a model-driven engineering approach, which combines Unified
Modeling Language (UML) and aspect-oriented software development (AOSD) to design
real-time and embedded automation systems. The proposed approach allows a smooth
transition from the initial phases to implementation by using software tools,
comprising the system specification and the automatic generation of source code.
By combining UML with model-level aspects and a script-base code generation tool,
it enables the use of AOSD during system design and implementation, even though
the target platform does not natively support such concepts. Experimental results
on using this approach to design real-world examples of automation systems are
presented. The results indicate a positive impact on the design of automation
systems. The encapsulation of nonfunctional requirements was improved, increasing
the reuse of developed artifacts. Generated source code statistics indicate that
the proposed approach can generated a fair amount of code per model element.
author:
- first_name: Marco A.
full_name: Wehrmeister, Marco A.
last_name: Wehrmeister
- first_name: Carlos E.
full_name: Pereira, Carlos E.
last_name: Pereira
- first_name: Franz-Josef
full_name: Rammig, Franz-Josef
last_name: Rammig
citation:
ama: 'Wehrmeister MA, Pereira CE, Rammig F-J. Aspect-Oriented Model-Driven Engineering
for Embedded Systems Applied to Automation Systems. In: IEEE Trans. on Industrial
Informatics Vol. 9 (No. 4). ; 2013:2373-2386.'
apa: Wehrmeister, M. A., Pereira, C. E., & Rammig, F.-J. (2013). Aspect-Oriented
Model-Driven Engineering for Embedded Systems Applied to Automation Systems.
IEEE Trans. on Industrial Informatics Vol. 9 (No. 4), 2373–2386.
bibtex: '@inproceedings{Wehrmeister_Pereira_Rammig_2013, title={Aspect-Oriented
Model-Driven Engineering for Embedded Systems Applied to Automation Systems},
booktitle={ IEEE Trans. on Industrial Informatics vol. 9 (no. 4)}, author={Wehrmeister,
Marco A. and Pereira, Carlos E. and Rammig, Franz-Josef}, year={2013}, pages={2373–2386}
}'
chicago: Wehrmeister, Marco A., Carlos E. Pereira, and Franz-Josef Rammig. “Aspect-Oriented
Model-Driven Engineering for Embedded Systems Applied to Automation Systems.”
In IEEE Trans. on Industrial Informatics Vol. 9 (No. 4), 2373–86, 2013.
ieee: M. A. Wehrmeister, C. E. Pereira, and F.-J. Rammig, “Aspect-Oriented Model-Driven
Engineering for Embedded Systems Applied to Automation Systems,” in IEEE Trans.
on Industrial Informatics vol. 9 (no. 4), 2013, pp. 2373–2386.
mla: Wehrmeister, Marco A., et al. “Aspect-Oriented Model-Driven Engineering for
Embedded Systems Applied to Automation Systems.” IEEE Trans. on Industrial
Informatics Vol. 9 (No. 4), 2013, pp. 2373–86.
short: 'M.A. Wehrmeister, C.E. Pereira, F.-J. Rammig, in: IEEE Trans. on Industrial
Informatics Vol. 9 (No. 4), 2013, pp. 2373–2386.'
date_created: 2021-10-04T08:40:10Z
date_updated: 2022-01-06T06:56:58Z
department:
- _id: '672'
language:
- iso: eng
page: 2373-2386
publication: ' IEEE Trans. on Industrial Informatics vol. 9 (no. 4)'
status: public
title: Aspect-Oriented Model-Driven Engineering for Embedded Systems Applied to Automation
Systems
type: conference
user_id: '21240'
year: '2013'
...
---
_id: '29228'
abstract:
- lang: eng
text: The global economic crisis in the 1890s affected the economy of Greece severely,
and in 1893 the Greek State had to stop servicing its foreign debt. Part of the<br
/>problem was the lack of diversity of Greek agricultural production, which
was focused on raisins and currants (especially flavourful raisins, grown exclusively
in the area around Corinth) for export. The collapse of market prices for this
good seriously affected the Greek treasury and society in the growing regions.
The Greek government responded by trying to withhold part of the harvest in fertile
years to stabilise world market prices. Plans to organise a monopoly company for
the currant trade necessitated high sums of capital from abroad. This article
investigates the question of how foreign bankers in London (Hambro & Son,
Emile Erlanger) and Paris (Banque de l’Union Parisienne) could be convinced to
participate in the project. Which factors allowed foreign bankers to trust in the
Greek national economy despite its poor reputation? What factors influenced their risk
management? The focus is on the role of Greek brokers in persuading the foreigners to
invest in Greece, especially the role played by Ioannis Pesmazoglou, the director
of the young and innovative Bank of Athens.
author:
- first_name: Korinna
full_name: Schönhärl, Korinna
id: '89037'
last_name: Schönhärl
orcid: 0000-0002-7967-3261
citation:
ama: 'Schönhärl K. Fighting the Financial Crisis in Greece: The Privileged Company
to Protect Production and Trade in Currants (1905) as International Bank Cooperation.
The Historical Review/La Revue Historique. 2013;10:107-134. doi:10.12681/hr.308'
apa: 'Schönhärl, K. (2013). Fighting the Financial Crisis in Greece: The Privileged
Company to Protect Production and Trade in Currants (1905) as International Bank
Cooperation. The Historical Review/La Revue Historique, 10, 107–134.
https://doi.org/10.12681/hr.308'
bibtex: '@article{Schönhärl_2013, title={Fighting the Financial Crisis in Greece:
The Privileged Company to Protect Production and Trade in Currants (1905) as International
Bank Cooperation}, volume={10}, DOI={10.12681/hr.308},
journal={The Historical Review/La Revue Historique}, publisher={National Documentation
Centre (EKT)}, author={Schönhärl, Korinna}, year={2013}, pages={107–134} }'
chicago: 'Schönhärl, Korinna. “Fighting the Financial Crisis in Greece: The Privileged
Company to Protect Production and Trade in Currants (1905) as International Bank
Cooperation.” The Historical Review/La Revue Historique 10 (2013): 107–34.
https://doi.org/10.12681/hr.308.'
ieee: 'K. Schönhärl, “Fighting the Financial Crisis in Greece: The Privileged Company
to Protect Production and Trade in Currants (1905) as International Bank Cooperation,”
The Historical Review/La Revue Historique, vol. 10, pp. 107–134, 2013,
doi: 10.12681/hr.308.'
mla: 'Schönhärl, Korinna. “Fighting the Financial Crisis in Greece: The Privileged
Company to Protect Production and Trade in Currants (1905) as International Bank
Cooperation.” The Historical Review/La Revue Historique, vol. 10, National
Documentation Centre (EKT), 2013, pp. 107–34, doi:10.12681/hr.308.'
short: K. Schönhärl, The Historical Review/La Revue Historique 10 (2013) 107–134.
date_created: 2022-01-11T10:05:21Z
date_updated: 2022-01-11T10:13:06Z
department:
- _id: '445'
doi: 10.12681/hr.308
extern: '1'
intvolume: ' 10'
keyword:
- History
language:
- iso: eng
page: 107-134
publication: The Historical Review/La Revue Historique
publication_identifier:
issn:
- 1791-7603
- 1790-3572
publication_status: published
publisher: National Documentation Centre (EKT)
quality_controlled: '1'
status: public
title: 'Fighting the Financial Crisis in Greece: The Privileged Company to Protect
Production and Trade in Currants (1905) as International Bank Cooperation'
type: journal_article
user_id: '89037'
volume: 10
year: '2013'
...
---
_id: '46940'
author:
- first_name: Katrin B.
full_name: Klingsieck, Katrin B.
id: '36716'
last_name: Klingsieck
- first_name: Axel
full_name: Grund, Axel
last_name: Grund
- first_name: Sebastian
full_name: Schmid, Sebastian
last_name: Schmid
- first_name: Stefan
full_name: Fries, Stefan
last_name: Fries
citation:
ama: 'Klingsieck KB, Grund A, Schmid S, Fries S. Why Students Procrastinate: A Qualitative
Approach. Journal of College Student Development. 2013;54(4):397-412. doi:10.1353/csd.2013.0060'
apa: 'Klingsieck, K. B., Grund, A., Schmid, S., & Fries, S. (2013). Why Students
Procrastinate: A Qualitative Approach. Journal of College Student Development,
54(4), 397–412. https://doi.org/10.1353/csd.2013.0060'
bibtex: '@article{Klingsieck_Grund_Schmid_Fries_2013, title={Why Students Procrastinate:
A Qualitative Approach}, volume={54}, DOI={10.1353/csd.2013.0060},
number={4}, journal={Journal of College Student Development}, publisher={Project
MUSE}, author={Klingsieck, Katrin B. and Grund, Axel and Schmid, Sebastian and
Fries, Stefan}, year={2013}, pages={397–412} }'
chicago: 'Klingsieck, Katrin B., Axel Grund, Sebastian Schmid, and Stefan Fries.
“Why Students Procrastinate: A Qualitative Approach.” Journal of College Student
Development 54, no. 4 (2013): 397–412. https://doi.org/10.1353/csd.2013.0060.'
ieee: 'K. B. Klingsieck, A. Grund, S. Schmid, and S. Fries, “Why Students Procrastinate:
A Qualitative Approach,” Journal of College Student Development, vol. 54,
no. 4, pp. 397–412, 2013, doi: 10.1353/csd.2013.0060.'
mla: 'Klingsieck, Katrin B., et al. “Why Students Procrastinate: A Qualitative Approach.”
Journal of College Student Development, vol. 54, no. 4, Project MUSE, 2013,
pp. 397–412, doi:10.1353/csd.2013.0060.'
short: K.B. Klingsieck, A. Grund, S. Schmid, S. Fries, Journal of College Student
Development 54 (2013) 397–412.
date_created: 2023-09-09T16:10:01Z
date_updated: 2023-09-09T16:29:11Z
doi: 10.1353/csd.2013.0060
intvolume: ' 54'
issue: '4'
keyword:
- Education
language:
- iso: eng
page: 397-412
publication: Journal of College Student Development
publication_identifier:
issn:
- 1543-3382
publication_status: published
publisher: Project MUSE
status: public
title: 'Why Students Procrastinate: A Qualitative Approach'
type: journal_article
user_id: '36716'
volume: 54
year: '2013'
...
---
_id: '47377'
author:
- first_name: M.
full_name: de Almeida Madeira Clemente, M.
last_name: de Almeida Madeira Clemente
- first_name: Axel
full_name: Berndt, Axel
id: '55565'
last_name: Berndt
- first_name: H.
full_name: Leitner, H.
last_name: Leitner
- first_name: M.
full_name: Keck, M.
last_name: Keck
- first_name: R.
full_name: Gaertner, R.
last_name: Gaertner
- first_name: R.
full_name: Groh, R.
last_name: Groh
citation:
ama: 'de Almeida Madeira Clemente M, Berndt A, Leitner H, Keck M, Gaertner R, Groh
R. New Perspectives on Interactivity in Project Management Tools. In: Stephanidis
C, ed. {HCI International 2013—Posters’ Extended Abstracts}. Vol 374. Communications
in Computer and Information Science. Springer Verlag; 2013:484–488.'
apa: de Almeida Madeira Clemente, M., Berndt, A., Leitner, H., Keck, M., Gaertner,
R., & Groh, R. (2013). New Perspectives on Interactivity in Project Management
Tools. In C. Stephanidis (Ed.), {HCI International 2013—Posters’ Extended Abstracts}
(Vol. 374, pp. 484–488). Springer Verlag.
bibtex: '@inproceedings{de Almeida Madeira Clemente_Berndt_Leitner_Keck_Gaertner_Groh_2013,
place={Las Vegas, Nevada}, series={Communications in Computer and Information
Science}, title={New Perspectives on Interactivity in Project Management Tools},
volume={374}, booktitle={{HCI International 2013—Posters’ Extended Abstracts}},
publisher={Springer Verlag}, author={de Almeida Madeira Clemente, M. and Berndt,
Axel and Leitner, H. and Keck, M. and Gaertner, R. and Groh, R.}, editor={Stephanidis,
C.}, year={2013}, pages={484–488}, collection={Communications in Computer and
Information Science} }'
chicago: 'Almeida Madeira Clemente, M. de, Axel Berndt, H. Leitner, M. Keck, R.
Gaertner, and R. Groh. “New Perspectives on Interactivity in Project Management
Tools.” In {HCI International 2013—Posters’ Extended Abstracts}, edited
by C. Stephanidis, 374:484–488. Communications in Computer and Information Science.
Las Vegas, Nevada: Springer Verlag, 2013.'
ieee: M. de Almeida Madeira Clemente, A. Berndt, H. Leitner, M. Keck, R. Gaertner,
and R. Groh, “New Perspectives on Interactivity in Project Management Tools,”
in {HCI International 2013—Posters’ Extended Abstracts}, 2013, vol. 374,
pp. 484–488.
mla: de Almeida Madeira Clemente, M., et al. “New Perspectives on Interactivity
in Project Management Tools.” {HCI International 2013—Posters’ Extended Abstracts},
edited by C. Stephanidis, vol. 374, Springer Verlag, 2013, pp. 484–488.
short: 'M. de Almeida Madeira Clemente, A. Berndt, H. Leitner, M. Keck, R. Gaertner,
R. Groh, in: C. Stephanidis (Ed.), {HCI International 2013—Posters’ Extended Abstracts},
Springer Verlag, Las Vegas, Nevada, 2013, pp. 484–488.'
date_created: 2023-09-25T10:44:15Z
date_updated: 2025-05-23T12:58:28Z
editor:
- first_name: C.
full_name: Stephanidis, C.
last_name: Stephanidis
intvolume: ' 374'
language:
- iso: eng
page: 484–488
place: Las Vegas, Nevada
publication: '{HCI International 2013—Posters’ Extended Abstracts}'
publisher: Springer Verlag
series_title: Communications in Computer and Information Science
status: public
title: New Perspectives on Interactivity in Project Management Tools
type: conference
user_id: '55565'
volume: 374
year: '2013'
...
---
_id: '28551'
abstract:
- lang: eng
text: The technical article describes the simulative support of work planning and
work control through a cloud application. On the basis of virtual machine tools,
customers are supported in the automated setup of the machines and in efficient
order scheduling. The approach presented is the core of the research project "Intelligent
work preparation based on virtual machine tools" (InVorMa) within the framework
of the top cluster "Intelligent Technical Systems OstWestfalenLippe" (it's OWL).
author:
- first_name: 'Frank '
full_name: 'Bauer, Frank '
last_name: Bauer
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Gerald
full_name: ' Rehage, Gerald'
last_name: ' Rehage'
citation:
ama: Bauer F, Gausemeier J, Rehage G. Work preparation 4.0 - cloud-based use of
virtual machine tools. wt workshop technology online. Published online
2013.
apa: Bauer, F., Gausemeier, J., & Rehage, G. (2013). Work preparation 4.0 -
cloud-based use of virtual machine tools. Wt Workshop Technology Online.
bibtex: '@article{Bauer_Gausemeier_ Rehage_2013, title={Work preparation 4.0 - cloud-based
use of virtual machine tools}, journal={wt workshop technology online}, author={Bauer,
Frank and Gausemeier, Jürgen and Rehage, Gerald}, year={2013} }'
chicago: Bauer, Frank , Jürgen Gausemeier, and Gerald Rehage. “Work Preparation
4.0 - Cloud-Based Use of Virtual Machine Tools.” Wt Workshop Technology Online,
2013.
ieee: F. Bauer, J. Gausemeier, and G. Rehage, “Work preparation 4.0 - cloud-based
use of virtual machine tools,” wt workshop technology online, 2013.
mla: Bauer, Frank, et al. “Work Preparation 4.0 - Cloud-Based Use of Virtual Machine
Tools.” Wt Workshop Technology Online, 2013.
short: F. Bauer, J. Gausemeier, G. Rehage, Wt Workshop Technology Online (2013).
date_created: 2021-12-10T09:54:46Z
date_updated: 2026-02-24T07:58:46Z
department:
- _id: '676'
language:
- iso: eng
publication: wt workshop technology online
publication_status: published
status: public
title: Work preparation 4.0 - cloud-based use of virtual machine tools
type: journal_article
user_id: '14972'
year: '2013'
...