[{"publisher":"NDT.net GmbH & Co. KG","_id":"64129","user_id":"93720","volume":31,"status":"public","conference":{"name":"15th Conference on Industrial Computed Tomography (iCT)","location":"Linz"},"oa":"1","citation":{"short":"L. Butzhammer, M.R.O. Braun, C. Herath, T. Hausotte, in: E-Journal of Nondestructive Testing, NDT.net GmbH &#38; Co. KG, 2026.","ama":"Butzhammer L, Braun MRO, Herath C, Hausotte T. Higher accuracy with fewer projections? Automated scan angle selection for dimensional Computed Tomography based on a simple data completeness measure for the part surface. In: <i>E-Journal of Nondestructive Testing</i>. Vol 31. NDT.net GmbH &#38; Co. KG; 2026. doi:<a href=\"https://doi.org/10.58286/32560\">10.58286/32560</a>","chicago":"Butzhammer, Lorenz, Matthias Robert Oskar Braun, Colin Herath, and Tino Hausotte. “Higher Accuracy with Fewer Projections? Automated Scan Angle Selection for Dimensional Computed Tomography Based on a Simple Data Completeness Measure for the Part Surface.” In <i>E-Journal of Nondestructive Testing</i>, Vol. 31. NDT.net GmbH &#38; Co. KG, 2026. <a href=\"https://doi.org/10.58286/32560\">https://doi.org/10.58286/32560</a>.","bibtex":"@inproceedings{Butzhammer_Braun_Herath_Hausotte_2026, title={Higher accuracy with fewer projections? Automated scan angle selection for dimensional Computed Tomography based on a simple data completeness measure for the part surface}, volume={31}, DOI={<a href=\"https://doi.org/10.58286/32560\">10.58286/32560</a>}, number={3}, booktitle={e-Journal of Nondestructive Testing}, publisher={NDT.net GmbH &#38; Co. KG}, author={Butzhammer, Lorenz and Braun, Matthias Robert Oskar and Herath, Colin and Hausotte, Tino}, year={2026} }","apa":"Butzhammer, L., Braun, M. R. O., Herath, C., &#38; Hausotte, T. (2026). Higher accuracy with fewer projections? Automated scan angle selection for dimensional Computed Tomography based on a simple data completeness measure for the part surface. <i>E-Journal of Nondestructive Testing</i>, <i>31</i>(3). <a href=\"https://doi.org/10.58286/32560\">https://doi.org/10.58286/32560</a>","mla":"Butzhammer, Lorenz, et al. “Higher Accuracy with Fewer Projections? Automated Scan Angle Selection for Dimensional Computed Tomography Based on a Simple Data Completeness Measure for the Part Surface.” <i>E-Journal of Nondestructive Testing</i>, vol. 31, no. 3, NDT.net GmbH &#38; Co. KG, 2026, doi:<a href=\"https://doi.org/10.58286/32560\">10.58286/32560</a>.","ieee":"L. Butzhammer, M. R. O. Braun, C. Herath, and T. Hausotte, “Higher accuracy with fewer projections? Automated scan angle selection for dimensional Computed Tomography based on a simple data completeness measure for the part surface,” in <i>e-Journal of Nondestructive Testing</i>, Linz, 2026, vol. 31, no. 3, doi: <a href=\"https://doi.org/10.58286/32560\">10.58286/32560</a>."},"quality_controlled":"1","project":[{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"name":"TRR 285 - Project Area C","_id":"133"},{"_id":"149","name":"TRR 285 - Subproject C05"}],"main_file_link":[{"url":"https://www.ndt.net/article/ctc2026/papers/ict26_Contribution_184.pdf","open_access":"1"}],"language":[{"iso":"eng"}],"doi":"10.58286/32560","year":"2026","title":"Higher accuracy with fewer projections? Automated scan angle selection for dimensional Computed Tomography based on a simple data completeness measure for the part surface","author":[{"full_name":"Butzhammer, Lorenz","last_name":"Butzhammer","first_name":"Lorenz"},{"last_name":"Braun","first_name":"Matthias Robert Oskar","full_name":"Braun, Matthias Robert Oskar"},{"last_name":"Herath","first_name":"Colin","full_name":"Herath, Colin"},{"first_name":"Tino","last_name":"Hausotte","full_name":"Hausotte, Tino"}],"publication_identifier":{"issn":["1435-4934"]},"publication_status":"published","date_updated":"2026-02-12T10:41:45Z","intvolume":"        31","date_created":"2026-02-12T10:11:08Z","type":"conference","department":[{"_id":"630"}],"issue":"3","publication":"e-Journal of Nondestructive Testing","abstract":[{"lang":"eng","text":"<jats:p>Selecting scan angles such that surface segments are aligned with straight X-ray paths (i.e., rays are tangential to the surface and therefore perpendicular to the local surface normal) is known to produce sharper transitions of those surface segments in the reconstructed volume. This enhances dimensional accuracy in sparse-view computed tomography (CT). However, existing approaches offer no direct means to exploit this criterion for automatic scan-angle optimization. We propose a method that uses a virtual representation of the CT setup, including an STL surface model of the inspected part, to automatically identify taskspecific scan angles. Using elementary vector calculus, the algorithm determines projection directions that generate tangential X-rays for targeted surface segments. To support different levels of geometric complexity, we introduce two variants of the angle-selection procedure. The methods were experimentally validated on two objects with distinct absorption and geometric characteristics. For a steel gauge block, employing the minimum number of task-specific projections required for surface-data completeness substantially outperformed a conventional high-projection scan. For a geometrically more complex test object, surface-related errors were still reduced within the region of interest. The proposed approach – particularly suited for flat surface structures and not accounting for image-degrading factors other than cone-beam artifacts – shows promise for high-throughput dimensional metrology of mono-material parts.</jats:p>"}]},{"author":[{"id":"114741","full_name":"Chen, Chin","last_name":"Chen","first_name":"Chin"},{"first_name":"Martin","last_name":"Hofmann","full_name":"Hofmann, Martin"},{"last_name":"Wallmersperger","first_name":"Thomas","full_name":"Wallmersperger, Thomas"}],"publication_identifier":{"issn":["1617-7061","1617-7061"]},"year":"2026","title":"A 2D Approach to Predict the High‐Cycle Fatigue Life of Clinched Joints","intvolume":"        26","publication_status":"published","date_updated":"2026-02-24T15:10:04Z","language":[{"iso":"eng"}],"article_number":"e70035","doi":"10.1002/pamm.70035","publication":"PAMM","issue":"1","abstract":[{"text":"<jats:title>ABSTRACT</jats:title>\r\n                  <jats:p>Clinching is a widely adopted joining technique in the automotive industry, enabling the fabrication of lightweight structures from dissimilar sheet materials. Accurate prediction of the fatigue life of clinched joints is essential for ensuring structural safety and minimizing development costs. However, full 3D fatigue simulations over millions of cycles are computationally intensive due to the complexity of contact mechanics. This study introduces a 2D numerical model that circumvents direct contact modeling by applying a slip condition at the sheet interface, significantly reducing computational demands. A micro‐slip friction model is used to represent the mechanical interface behavior, while a two‐scale damage model captures the fatigue damage evolution. The model is validated against experimental data and used to investigate the influence of friction coefficient and tangential contact stiffness on fatigue life, highlighting its efficiency and predictive capability.</jats:p>","lang":"eng"}],"date_created":"2026-02-19T10:03:06Z","type":"journal_article","status":"public","_id":"64251","publisher":"Wiley","volume":26,"user_id":"114741","citation":{"mla":"Chen, Chin, et al. “A 2D Approach to Predict the High‐Cycle Fatigue Life of Clinched Joints.” <i>PAMM</i>, vol. 26, no. 1, e70035, Wiley, 2026, doi:<a href=\"https://doi.org/10.1002/pamm.70035\">10.1002/pamm.70035</a>.","ama":"Chen C, Hofmann M, Wallmersperger T. A 2D Approach to Predict the High‐Cycle Fatigue Life of Clinched Joints. <i>PAMM</i>. 2026;26(1). doi:<a href=\"https://doi.org/10.1002/pamm.70035\">10.1002/pamm.70035</a>","bibtex":"@article{Chen_Hofmann_Wallmersperger_2026, title={A 2D Approach to Predict the High‐Cycle Fatigue Life of Clinched Joints}, volume={26}, DOI={<a href=\"https://doi.org/10.1002/pamm.70035\">10.1002/pamm.70035</a>}, number={1e70035}, journal={PAMM}, publisher={Wiley}, author={Chen, Chin and Hofmann, Martin and Wallmersperger, Thomas}, year={2026} }","apa":"Chen, C., Hofmann, M., &#38; Wallmersperger, T. (2026). A 2D Approach to Predict the High‐Cycle Fatigue Life of Clinched Joints. <i>PAMM</i>, <i>26</i>(1), Article e70035. <a href=\"https://doi.org/10.1002/pamm.70035\">https://doi.org/10.1002/pamm.70035</a>","ieee":"C. Chen, M. Hofmann, and T. Wallmersperger, “A 2D Approach to Predict the High‐Cycle Fatigue Life of Clinched Joints,” <i>PAMM</i>, vol. 26, no. 1, Art. no. e70035, 2026, doi: <a href=\"https://doi.org/10.1002/pamm.70035\">10.1002/pamm.70035</a>.","chicago":"Chen, Chin, Martin Hofmann, and Thomas Wallmersperger. “A 2D Approach to Predict the High‐Cycle Fatigue Life of Clinched Joints.” <i>PAMM</i> 26, no. 1 (2026). <a href=\"https://doi.org/10.1002/pamm.70035\">https://doi.org/10.1002/pamm.70035</a>.","short":"C. Chen, M. Hofmann, T. Wallmersperger, PAMM 26 (2026)."},"project":[{"_id":"142","name":"TRR 285 - Subproject B03"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"_id":"132","name":"TRR 285 - Project Area B"}]},{"date_created":"2026-02-19T10:02:29Z","type":"journal_article","citation":{"ieee":"C. Chen, M. Hofmann, and T. Wallmersperger, “Modeling the uniform corrosion behavior of zinc in salt spray testing,” <i>npj Materials Degradation</i>, 2026, doi: <a href=\"https://doi.org/10.1038/s41529-026-00749-0\">10.1038/s41529-026-00749-0</a>.","apa":"Chen, C., Hofmann, M., &#38; Wallmersperger, T. (2026). Modeling the uniform corrosion behavior of zinc in salt spray testing. <i>Npj Materials Degradation</i>. <a href=\"https://doi.org/10.1038/s41529-026-00749-0\">https://doi.org/10.1038/s41529-026-00749-0</a>","mla":"Chen, Chin, et al. “Modeling the Uniform Corrosion Behavior of Zinc in Salt Spray Testing.” <i>Npj Materials Degradation</i>, Springer Science and Business Media LLC, 2026, doi:<a href=\"https://doi.org/10.1038/s41529-026-00749-0\">10.1038/s41529-026-00749-0</a>.","bibtex":"@article{Chen_Hofmann_Wallmersperger_2026, title={Modeling the uniform corrosion behavior of zinc in salt spray testing}, DOI={<a href=\"https://doi.org/10.1038/s41529-026-00749-0\">10.1038/s41529-026-00749-0</a>}, journal={npj Materials Degradation}, publisher={Springer Science and Business Media LLC}, author={Chen, Chin and Hofmann, Martin and Wallmersperger, Thomas}, year={2026} }","chicago":"Chen, Chin, Martin Hofmann, and Thomas Wallmersperger. “Modeling the Uniform Corrosion Behavior of Zinc in Salt Spray Testing.” <i>Npj Materials Degradation</i>, 2026. <a href=\"https://doi.org/10.1038/s41529-026-00749-0\">https://doi.org/10.1038/s41529-026-00749-0</a>.","short":"C. Chen, M. Hofmann, T. Wallmersperger, Npj Materials Degradation (2026).","ama":"Chen C, Hofmann M, Wallmersperger T. Modeling the uniform corrosion behavior of zinc in salt spray testing. <i>npj Materials Degradation</i>. Published online 2026. doi:<a href=\"https://doi.org/10.1038/s41529-026-00749-0\">10.1038/s41529-026-00749-0</a>"},"publication":"npj Materials Degradation","project":[{"_id":"142","name":"TRR 285 - Subproject B03"},{"name":"TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n                  <jats:p>Salt-spray testing is widely used in the automotive and materials industries to assess the corrosion resistance of protective coatings, where uniform corrosion is a key indicator of material performance. This work presents a numerical uniform corrosion model that predicts the corrosion rate of hot-dip zinc in salt-spray environments by incorporating electrochemical reactions, mass transport via the Nernst–Planck equation, and ionic-strength effects through the Brønsted–Bjerrum relation. The model is calibrated using immersion-test data and extended to account for electrolyte layer growth, droplet deposition, and periodic run-off in salt-spray environments. The calibration establishes a relationship between the porosity of the zinc oxide layer and the rate constant of zinc oxide precipitation. The validated model reproduces the transition from activation- to diffusion-controlled corrosion and captures the experimentally observed corrosion kinetics with an error margin of 20% when electrolyte renewal is included. The results highlight the decisive role of electrolyte dynamics in salt-spray environments and provide a foundation for extending the framework to more complex cyclic corrosion tests.</jats:p>"}],"language":[{"iso":"eng"}],"_id":"64250","publisher":"Springer Science and Business Media LLC","doi":"10.1038/s41529-026-00749-0","user_id":"114741","author":[{"id":"114741","full_name":"Chen, Chin","last_name":"Chen","first_name":"Chin"},{"full_name":"Hofmann, Martin","last_name":"Hofmann","first_name":"Martin"},{"full_name":"Wallmersperger, Thomas","first_name":"Thomas","last_name":"Wallmersperger"}],"publication_identifier":{"issn":["2397-2106"]},"status":"public","year":"2026","title":"Modeling the uniform corrosion behavior of zinc in salt spray testing","date_updated":"2026-02-24T15:10:55Z","publication_status":"published"},{"language":[{"iso":"eng"}],"doi":"https://doi.org/10.1016/j.jmapro.2026.02.040","title":"Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR)","year":"2026","author":[{"id":"32340","last_name":"Neuser","first_name":"Moritz","full_name":"Neuser, Moritz"},{"full_name":"Kaimann, Pia Katharina","first_name":"Pia Katharina","last_name":"Kaimann","id":"44935"},{"full_name":"Stratmann, Ina","first_name":"Ina","last_name":"Stratmann"},{"full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias","id":"7850"},{"full_name":"Klöckner, Johann Moritz Benedikt","first_name":"Johann Moritz Benedikt","last_name":"Klöckner"},{"full_name":"Mann, Moritz","first_name":"Moritz","last_name":"Mann"},{"id":"48411","first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter"},{"full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"}],"publication_status":"published","date_updated":"2026-02-26T11:22:03Z","article_type":"original","intvolume":"       164","date_created":"2026-02-26T11:21:24Z","keyword":["Mechanical joining","Aluminium","Self-piercing riveting","Casting","Microstructure","Joinability AlSi-alloys"],"type":"journal_article","department":[{"_id":"43"},{"_id":"158"},{"_id":"157"},{"_id":"321"}],"publication":"Journal of Manufacturing Processes","abstract":[{"text":"One of the major topics in the modern automotive industry is reducing emissions and increasing the mileage\r\nrange. To tackle this challenge, on the one hand, modifying the powertrain system is a possibility, and on the\r\nother hand, lightweight design offers various possibilities. Multi-Material Design (MMD) involves designing car\r\nbodies that combine different materials that require joining. Given the variety of materials, mechanical joining\r\nprocesses are preferred. Especially the current development of the Giga/Mega-casting process concerning\r\naluminium casting and the subsequent mechanical joining illustrates the challenges of this material group. In car\r\nproduction, aluminium castings are mainly made from aluminium-silicon (AlSi) alloys. Ultimately, the alloy\r\nsystem's insufficient ductility leads to crack initiation during mechanical joining. Cast parts are therefore often\r\nused in areas of the car body that are exposed to high-pressure loads. For example, self-piercing riveting (SPR) is\r\nused due to its high load-bearing capacity. In this study, improved joinability is demonstrated by influencing the\r\nmicrostructure through tailored solidification rates and a developed heat-treatment chain strategy adapted for\r\nhypoeutectic AlSi systems. Data on microstructure, mechanical, and joining properties are used to develop a\r\nsolidification-joining correlation for the SPR process across a range of Si contents and solidification rates. The\r\npurpose is to develop the ability to produce suitable aluminium castings with sufficient joinability, thereby\r\nimproving versatility.","lang":"eng"}],"funded_apc":"1","_id":"64678","publisher":"Elsevier","user_id":"32340","volume":164,"status":"public","citation":{"bibtex":"@article{Neuser_Kaimann_Stratmann_Bobbert_Klöckner_Mann_Hoyer_Meschut_Schaper_2026, title={Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR)}, volume={164}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>}, journal={Journal of Manufacturing Processes}, publisher={Elsevier}, author={Neuser, Moritz and Kaimann, Pia Katharina and Stratmann, Ina and Bobbert, Mathias and Klöckner, Johann Moritz Benedikt and Mann, Moritz and Hoyer, Kay-Peter and Meschut, Gerson and Schaper, Mirko}, year={2026} }","ama":"Neuser M, Kaimann PK, Stratmann I, et al. Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR). <i>Journal of Manufacturing Processes</i>. 2026;164. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>","short":"M. Neuser, P.K. Kaimann, I. Stratmann, M. Bobbert, J.M.B. Klöckner, M. Mann, K.-P. Hoyer, G. Meschut, M. Schaper, Journal of Manufacturing Processes 164 (2026).","chicago":"Neuser, Moritz, Pia Katharina Kaimann, Ina Stratmann, Mathias Bobbert, Johann Moritz Benedikt Klöckner, Moritz Mann, Kay-Peter Hoyer, Gerson Meschut, and Mirko Schaper. “Solidification-Joinability Correlation of Hypoeutectic Aluminium Casting Alloys for Self-Piercing Riveting (SPR).” <i>Journal of Manufacturing Processes</i> 164 (2026). <a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>.","ieee":"M. Neuser <i>et al.</i>, “Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR),” <i>Journal of Manufacturing Processes</i>, vol. 164, 2026, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>.","apa":"Neuser, M., Kaimann, P. K., Stratmann, I., Bobbert, M., Klöckner, J. M. B., Mann, M., Hoyer, K.-P., Meschut, G., &#38; Schaper, M. (2026). Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR). <i>Journal of Manufacturing Processes</i>, <i>164</i>. <a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>","mla":"Neuser, Moritz, et al. “Solidification-Joinability Correlation of Hypoeutectic Aluminium Casting Alloys for Self-Piercing Riveting (SPR).” <i>Journal of Manufacturing Processes</i>, vol. 164, Elsevier, 2026, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2026.02.040\">https://doi.org/10.1016/j.jmapro.2026.02.040</a>."},"quality_controlled":"1","project":[{"name":"TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 - Subproject A02","_id":"136"},{"name":"TRR 285 - Subproject C02","_id":"146"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}]},{"intvolume":"        13","date_updated":"2026-03-16T12:38:13Z","publication_status":"published","publication_identifier":{"issn":["2666-3309"]},"author":[{"last_name":"Ludwig","first_name":"Jean-Patrick","full_name":"Ludwig, Jean-Patrick","id":"76631"},{"last_name":"Tolke","first_name":"Emil","full_name":"Tolke, Emil"},{"id":"61977","full_name":"Schlichter, Malte Christian","last_name":"Schlichter","first_name":"Malte Christian"},{"id":"7850","last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias"},{"id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"}],"year":"2026","title":"Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners","doi":"10.1016/j.jajp.2026.100391","language":[{"iso":"eng"}],"article_number":"100391","abstract":[{"lang":"eng","text":"Modern industrial development has necessitated a wide range of joining technologies. Self-pierce riveting has become a prevalent technique for sheet metal assembly, especially in automotive applications. Achieving proper joint geometry and adequate load-bearing capacity depends on appropriate tool selection and precise process control. Material properties and condition also play a significant role in process performance. To accommodate the inevitable variations in component characteristics during production, a robust and stable joining process is essential. The study focuses on investigating the influence of preformed joining partners on the joining process and the joint's load capacity. An EN AW-6014 in T4 condition, as well as an HCT590X, are used as materials for this study. For this purpose, an exemplary process chain consisting of the steps of performing, joining, and shear load testing is studied. Each process step is implemented using an FE model to predict the outcome of subsequent steps. For analysis of the influence of pre-strain, an optimisation software is used to plan and execute variations of the process. These variations are used to create a meta-model that can describe the relationships between pre-forming and characteristic parameters of subsequent process steps. The resulting model is validated by comparing simulation and experimental data. Finally, in a novel approach, the robustness of the presented process chain is analyzed in terms of a tolerable performance level for the joining partners."}],"publication":"Journal of Advanced Joining Processes","department":[{"_id":"9"}],"keyword":["Self-pierce riveting","FE modelling","Plastic pre-deformation","Meta modelling"],"type":"journal_article","date_created":"2026-03-16T12:30:39Z","status":"public","volume":13,"user_id":"76631","_id":"64985","publisher":"Elsevier BV","project":[{"_id":"131","name":"TRR 285 - Project Area A"},{"_id":"135","name":"TRR 285 - Subproject A01"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","citation":{"ama":"Ludwig J-P, Tolke E, Schlichter MC, Bobbert M, Meschut G. Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners. <i>Journal of Advanced Joining Processes</i>. 2026;13. doi:<a href=\"https://doi.org/10.1016/j.jajp.2026.100391\">10.1016/j.jajp.2026.100391</a>","bibtex":"@article{Ludwig_Tolke_Schlichter_Bobbert_Meschut_2026, title={Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners}, volume={13}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2026.100391\">10.1016/j.jajp.2026.100391</a>}, number={100391}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Ludwig, Jean-Patrick and Tolke, Emil and Schlichter, Malte Christian and Bobbert, Mathias and Meschut, Gerson}, year={2026} }","mla":"Ludwig, Jean-Patrick, et al. “Numerical Analysis of the Robustness of Self-Pierce Riveting with Pre-Formed Joining Partners.” <i>Journal of Advanced Joining Processes</i>, vol. 13, 100391, Elsevier BV, 2026, doi:<a href=\"https://doi.org/10.1016/j.jajp.2026.100391\">10.1016/j.jajp.2026.100391</a>.","chicago":"Ludwig, Jean-Patrick, Emil Tolke, Malte Christian Schlichter, Mathias Bobbert, and Gerson Meschut. “Numerical Analysis of the Robustness of Self-Pierce Riveting with Pre-Formed Joining Partners.” <i>Journal of Advanced Joining Processes</i> 13 (2026). <a href=\"https://doi.org/10.1016/j.jajp.2026.100391\">https://doi.org/10.1016/j.jajp.2026.100391</a>.","short":"J.-P. Ludwig, E. Tolke, M.C. Schlichter, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes 13 (2026).","apa":"Ludwig, J.-P., Tolke, E., Schlichter, M. C., Bobbert, M., &#38; Meschut, G. (2026). Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners. <i>Journal of Advanced Joining Processes</i>, <i>13</i>, Article 100391. <a href=\"https://doi.org/10.1016/j.jajp.2026.100391\">https://doi.org/10.1016/j.jajp.2026.100391</a>","ieee":"J.-P. Ludwig, E. Tolke, M. C. Schlichter, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners,” <i>Journal of Advanced Joining Processes</i>, vol. 13, Art. no. 100391, 2026, doi: <a href=\"https://doi.org/10.1016/j.jajp.2026.100391\">10.1016/j.jajp.2026.100391</a>."}},{"department":[{"_id":"43"},{"_id":"157"}],"type":"journal_article","date_created":"2026-04-08T08:25:32Z","abstract":[{"text":"To reduce CO₂ emissions, the automotive industry is adopting multi-material structures. Fusion-based joining reaches its limits for aluminium–steel due to brittle intermetallic phases and mismatched thermophysical properties; therefore, mechanical joining (e.g., SPR) is used. Though conventional SPR requires tool changes for different stack-ups. Versatile self-piercing riveting (V-SPR) addresses this with an extended punch actuator and a multi-range-capable rivet (Kappe in PERD16:363–378, 2022), enabling joints up to 600 MPa across varying thicknesses without retooling. With the use of ultra-high-strength steels up to 1000 MPa, optimisation is required. This study quantifies how rivet shank geometry affects joint formation using a design of experiments and validated 2D axisymmetric FE simulations. The optimum depends strongly on the material system. For CP1000–EN AW-6014, maximum interlock f is predicted for a medium shank thickness of about 0.73 mm, a small internal foot radius of 0.620 mm, and a deeper drill depth of 3.136 mm, yielding f fc =0.4503 mm with a desirability of 0.954. For EN AW-6014–EN AW-6014, the optimum shifts to a thinner shank of 0.670 mm, a larger internal foot radius of 0.820 mm and a shallow drill depth of 2.30 mm, giving ffc = 0.3023 mm with a desirability of 1.0. A compromise geometry of 0.713 mm shank thickness, 0.776 mm internal foot radius and 2.755 mm drill depth achieves ffc = 0.3641 mm for CP1000–aluminium and ffc = 0.1851 mm for aluminium–aluminium with an overall desirability D = 0.6378, expanding V-SPR to ultra-high-strength steel–aluminium joints while maintaining aluminium joinability.","lang":"eng"}],"publication":"Discover Mechanical Engineering","issue":"1","doi":"10.1007/s44245-026-00221-y","language":[{"iso":"eng"}],"article_number":"43","intvolume":"         5","publication_status":"published","date_updated":"2026-04-08T08:34:40Z","author":[{"last_name":"Kaimann","first_name":"Pia Katharina","full_name":"Kaimann, Pia Katharina","id":"44935"},{"full_name":"Ritter, Nico","last_name":"Ritter","first_name":"Nico"},{"last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias","id":"7850"},{"id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246"}],"publication_identifier":{"issn":["2731-6564"]},"title":"Influence of the shank geometry on the joint formation of the versatile self-piercing riveting of ultra-high-strength steel-aluminium and aluminium-aluminium assemblies","year":"2026","project":[{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"_id":"133","name":"TRR 285 - Project Area C"},{"_id":"146","name":"TRR 285 - Subproject C02"}],"quality_controlled":"1","citation":{"ama":"Kaimann PK, Ritter N, Bobbert M, Meschut G. Influence of the shank geometry on the joint formation of the versatile self-piercing riveting of ultra-high-strength steel-aluminium and aluminium-aluminium assemblies. <i>Discover Mechanical Engineering</i>. 2026;5(1). doi:<a href=\"https://doi.org/10.1007/s44245-026-00221-y\">10.1007/s44245-026-00221-y</a>","short":"P.K. Kaimann, N. Ritter, M. Bobbert, G. Meschut, Discover Mechanical Engineering 5 (2026).","chicago":"Kaimann, Pia Katharina, Nico Ritter, Mathias Bobbert, and Gerson Meschut. “Influence of the Shank Geometry on the Joint Formation of the Versatile Self-Piercing Riveting of Ultra-High-Strength Steel-Aluminium and Aluminium-Aluminium Assemblies.” <i>Discover Mechanical Engineering</i> 5, no. 1 (2026). <a href=\"https://doi.org/10.1007/s44245-026-00221-y\">https://doi.org/10.1007/s44245-026-00221-y</a>.","bibtex":"@article{Kaimann_Ritter_Bobbert_Meschut_2026, title={Influence of the shank geometry on the joint formation of the versatile self-piercing riveting of ultra-high-strength steel-aluminium and aluminium-aluminium assemblies}, volume={5}, DOI={<a href=\"https://doi.org/10.1007/s44245-026-00221-y\">10.1007/s44245-026-00221-y</a>}, number={143}, journal={Discover Mechanical Engineering}, publisher={Springer Science and Business Media LLC}, author={Kaimann, Pia Katharina and Ritter, Nico and Bobbert, Mathias and Meschut, Gerson}, year={2026} }","apa":"Kaimann, P. K., Ritter, N., Bobbert, M., &#38; Meschut, G. (2026). Influence of the shank geometry on the joint formation of the versatile self-piercing riveting of ultra-high-strength steel-aluminium and aluminium-aluminium assemblies. <i>Discover Mechanical Engineering</i>, <i>5</i>(1), Article 43. <a href=\"https://doi.org/10.1007/s44245-026-00221-y\">https://doi.org/10.1007/s44245-026-00221-y</a>","mla":"Kaimann, Pia Katharina, et al. “Influence of the Shank Geometry on the Joint Formation of the Versatile Self-Piercing Riveting of Ultra-High-Strength Steel-Aluminium and Aluminium-Aluminium Assemblies.” <i>Discover Mechanical Engineering</i>, vol. 5, no. 1, 43, Springer Science and Business Media LLC, 2026, doi:<a href=\"https://doi.org/10.1007/s44245-026-00221-y\">10.1007/s44245-026-00221-y</a>.","ieee":"P. K. Kaimann, N. Ritter, M. Bobbert, and G. Meschut, “Influence of the shank geometry on the joint formation of the versatile self-piercing riveting of ultra-high-strength steel-aluminium and aluminium-aluminium assemblies,” <i>Discover Mechanical Engineering</i>, vol. 5, no. 1, Art. no. 43, 2026, doi: <a href=\"https://doi.org/10.1007/s44245-026-00221-y\">10.1007/s44245-026-00221-y</a>."},"volume":5,"user_id":"44935","_id":"65373","publisher":"Springer Science and Business Media LLC","status":"public"},{"department":[{"_id":"149"}],"type":"journal_article","date_created":"2026-04-14T13:05:24Z","project":[{"_id":"140","name":"TRR 285 - Subproject B01"},{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"citation":{"ieee":"D. R. Devulapally and T. Tröster, “Improving the load-bearing capacity of clinched joints through cavity filling with structural epoxy adhesive.,” <i>Discover Mechanical Engineering</i>, vol. 5, 2026, doi: <a href=\"https://doi.org/10.1007/s44245-026-00223-w\">https://doi.org/10.1007/s44245-026-00223-w</a>.","mla":"Devulapally, Deekshith Reddy, and Thomas Tröster. “Improving the Load-Bearing Capacity of Clinched Joints through Cavity Filling with Structural Epoxy Adhesive.” <i>Discover Mechanical Engineering</i>, vol. 5, Springer Nature, 2026, doi:<a href=\"https://doi.org/10.1007/s44245-026-00223-w\">https://doi.org/10.1007/s44245-026-00223-w</a>.","apa":"Devulapally, D. R., &#38; Tröster, T. (2026). Improving the load-bearing capacity of clinched joints through cavity filling with structural epoxy adhesive. <i>Discover Mechanical Engineering</i>, <i>5</i>. <a href=\"https://doi.org/10.1007/s44245-026-00223-w\">https://doi.org/10.1007/s44245-026-00223-w</a>","bibtex":"@article{Devulapally_Tröster_2026, title={Improving the load-bearing capacity of clinched joints through cavity filling with structural epoxy adhesive.}, volume={5}, DOI={<a href=\"https://doi.org/10.1007/s44245-026-00223-w\">https://doi.org/10.1007/s44245-026-00223-w</a>}, journal={Discover Mechanical Engineering}, publisher={Springer Nature}, author={Devulapally, Deekshith Reddy and Tröster, Thomas}, year={2026} }","ama":"Devulapally DR, Tröster T. Improving the load-bearing capacity of clinched joints through cavity filling with structural epoxy adhesive. <i>Discover Mechanical Engineering</i>. 2026;5. doi:<a href=\"https://doi.org/10.1007/s44245-026-00223-w\">https://doi.org/10.1007/s44245-026-00223-w</a>","short":"D.R. Devulapally, T. Tröster, Discover Mechanical Engineering 5 (2026).","chicago":"Devulapally, Deekshith Reddy, and Thomas Tröster. “Improving the Load-Bearing Capacity of Clinched Joints through Cavity Filling with Structural Epoxy Adhesive.” <i>Discover Mechanical Engineering</i> 5 (2026). <a href=\"https://doi.org/10.1007/s44245-026-00223-w\">https://doi.org/10.1007/s44245-026-00223-w</a>."},"publication":"Discover Mechanical Engineering","volume":5,"user_id":"76837","doi":"https://doi.org/10.1007/s44245-026-00223-w","language":[{"iso":"eng"}],"_id":"65435","publisher":"Springer Nature","article_type":"original","intvolume":"         5","publication_status":"published","date_updated":"2026-04-14T13:07:17Z","author":[{"full_name":"Devulapally, Deekshith Reddy","last_name":"Devulapally","first_name":"Deekshith Reddy","id":"76837"},{"id":"553","first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas"}],"status":"public","title":"Improving the load-bearing capacity of clinched joints through cavity filling with structural epoxy adhesive.","year":"2026"},{"department":[{"_id":"149"},{"_id":"321"},{"_id":"9"}],"type":"journal_article","date_created":"2026-04-22T10:23:12Z","project":[{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"name":"TRR 285 - Subproject B01","_id":"140"}],"citation":{"bibtex":"@article{Mergheim_Wallmersperger_Wolf_Schlichter_Ludwig_Friedlein_Gerritzen_Devulapally_Chen_Weiss_et al._2026, title={Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2026.100402\">10.1016/j.jajp.2026.100402</a>}, number={100402}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Mergheim, Julia and Wallmersperger, Thomas and Wolf, Eugen and Schlichter, Malte and Ludwig, Jean-Patrick and Friedlein, Johannes and Gerritzen, Johannes and Devulapally, Deekshith Reddy and Chen, Chin and Weiss, Deborah and et al.}, year={2026} }","short":"J. Mergheim, T. Wallmersperger, E. Wolf, M. Schlichter, J.-P. Ludwig, J. Friedlein, J. Gerritzen, D.R. Devulapally, C. Chen, D. Weiss, S. Krome, G. Reschke, M. Gude, Journal of Advanced Joining Processes (2026).","ama":"Mergheim J, Wallmersperger T, Wolf E, et al. Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior. <i>Journal of Advanced Joining Processes</i>. Published online 2026. doi:<a href=\"https://doi.org/10.1016/j.jajp.2026.100402\">10.1016/j.jajp.2026.100402</a>","chicago":"Mergheim, Julia, Thomas Wallmersperger, Eugen Wolf, Malte Schlichter, Jean-Patrick Ludwig, Johannes Friedlein, Johannes Gerritzen, et al. “Simulation-Based Process Chain for Aluminum Clinched Joints: Predicting Geometry, Strength, and Failure Behavior.” <i>Journal of Advanced Joining Processes</i>, 2026. <a href=\"https://doi.org/10.1016/j.jajp.2026.100402\">https://doi.org/10.1016/j.jajp.2026.100402</a>.","ieee":"J. Mergheim <i>et al.</i>, “Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior,” <i>Journal of Advanced Joining Processes</i>, Art. no. 100402, 2026, doi: <a href=\"https://doi.org/10.1016/j.jajp.2026.100402\">10.1016/j.jajp.2026.100402</a>.","mla":"Mergheim, Julia, et al. “Simulation-Based Process Chain for Aluminum Clinched Joints: Predicting Geometry, Strength, and Failure Behavior.” <i>Journal of Advanced Joining Processes</i>, 100402, Elsevier BV, 2026, doi:<a href=\"https://doi.org/10.1016/j.jajp.2026.100402\">10.1016/j.jajp.2026.100402</a>.","apa":"Mergheim, J., Wallmersperger, T., Wolf, E., Schlichter, M., Ludwig, J.-P., Friedlein, J., Gerritzen, J., Devulapally, D. R., Chen, C., Weiss, D., Krome, S., Reschke, G., &#38; Gude, M. (2026). Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior. <i>Journal of Advanced Joining Processes</i>, Article 100402. <a href=\"https://doi.org/10.1016/j.jajp.2026.100402\">https://doi.org/10.1016/j.jajp.2026.100402</a>"},"publication":"Journal of Advanced Joining Processes","doi":"10.1016/j.jajp.2026.100402","user_id":"76837","publisher":"Elsevier BV","_id":"65488","language":[{"iso":"eng"}],"article_number":"100402","date_updated":"2026-04-22T10:26:11Z","publication_status":"published","author":[{"full_name":"Mergheim, Julia","last_name":"Mergheim","first_name":"Julia"},{"full_name":"Wallmersperger, Thomas","first_name":"Thomas","last_name":"Wallmersperger"},{"full_name":"Wolf, Eugen","last_name":"Wolf","first_name":"Eugen"},{"full_name":"Schlichter, Malte","first_name":"Malte","last_name":"Schlichter"},{"last_name":"Ludwig","first_name":"Jean-Patrick","full_name":"Ludwig, Jean-Patrick"},{"first_name":"Johannes","last_name":"Friedlein","full_name":"Friedlein, Johannes"},{"last_name":"Gerritzen","first_name":"Johannes","full_name":"Gerritzen, Johannes"},{"id":"76837","full_name":"Devulapally, Deekshith Reddy","first_name":"Deekshith Reddy","last_name":"Devulapally"},{"last_name":"Chen","first_name":"Chin","full_name":"Chen, Chin"},{"last_name":"Weiss","first_name":"Deborah","full_name":"Weiss, Deborah"},{"first_name":"Sven","last_name":"Krome","full_name":"Krome, Sven"},{"full_name":"Reschke, Gregor","first_name":"Gregor","last_name":"Reschke"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"publication_identifier":{"issn":["2666-3309"]},"status":"public","title":"Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior","year":"2026"},{"type":"journal_article","date_created":"2026-05-07T15:07:34Z","abstract":[{"lang":"eng","text":"<jats:p>The mechanical joining of continuous fiber-reinforced thermoplastics (cFRTP) and metal sheets represents a promising approach for manufacturing hybrid lightweight structures. To reduce the time and cost associated with extensive experimental investigations, numerical modeling strategies are increasingly applied. In this numerical study, a further step in the modelling strategy for the direct pin-pressing (DPP) process of cFRTP and metal sheets is presented. The study focuses on modeling and simulating the occurring deformation mechanisms of decomposition, compaction, and separation of individual rovings on the mesoscale to analyze the resulting material structure. For this purpose, two simplified models were derived. The textile architecture is represented based on micrographs of cross-sections and discretized using the finite element method. The deformation of individual rovings during joining leads to a deformation of their initial elliptical cross section. To capture this level of resolution, both a cohesive zone and a pure contact approach are applied within the rovings. The highly viscous thermoplastic melt is modeled as a fluid employing the Arbitrary Lagrange–Eulerian (ALE) method. Matrix and roving meshes are coupled to account for fluid–structure interaction (FSI) during process. The study shows that coupling of matrix and rovings is necessary to obtain more accurate predictions of the deformation behaviour. Furthermore, the cohesive zone approach is better suited to simulate the emerging deformation mechanisms.</jats:p>"}],"publication":"Key Engineering Materials","doi":"10.4028/p-e8wywr","language":[{"iso":"eng"}],"date_updated":"2026-05-07T15:10:16Z","publication_status":"published","intvolume":"      1050","year":"2026","title":"Modelling Deformation Mechanisms Decomposition, Separation and Compaction in Mechanical Joining Processes of Fiber Reinforced Thermoplastics on Meso Scale","publication_identifier":{"issn":["1662-9795"]},"author":[{"first_name":"Benjamin","last_name":"Gröger","full_name":"Gröger, Benjamin"},{"id":"105344","full_name":"Gerritzen, Johannes","last_name":"Gerritzen","orcid":"0000-0002-0169-8602","first_name":"Johannes"},{"last_name":"Hornig","first_name":"Andreas","full_name":"Hornig, Andreas"},{"full_name":"Gude, Maik","first_name":"Maik","last_name":"Gude"}],"project":[{"_id":"137","name":"TRR 285 - Subproject A03"},{"_id":"131","name":"TRR 285 - Project Area A"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"citation":{"ieee":"B. Gröger, J. Gerritzen, A. Hornig, and M. Gude, “Modelling Deformation Mechanisms Decomposition, Separation and Compaction in Mechanical Joining Processes of Fiber Reinforced Thermoplastics on Meso Scale,” <i>Key Engineering Materials</i>, vol. 1050, pp. 227–234, 2026, doi: <a href=\"https://doi.org/10.4028/p-e8wywr\">10.4028/p-e8wywr</a>.","apa":"Gröger, B., Gerritzen, J., Hornig, A., &#38; Gude, M. (2026). Modelling Deformation Mechanisms Decomposition, Separation and Compaction in Mechanical Joining Processes of Fiber Reinforced Thermoplastics on Meso Scale. <i>Key Engineering Materials</i>, <i>1050</i>, 227–234. <a href=\"https://doi.org/10.4028/p-e8wywr\">https://doi.org/10.4028/p-e8wywr</a>","short":"B. Gröger, J. Gerritzen, A. Hornig, M. Gude, Key Engineering Materials 1050 (2026) 227–234.","chicago":"Gröger, Benjamin, Johannes Gerritzen, Andreas Hornig, and Maik Gude. “Modelling Deformation Mechanisms Decomposition, Separation and Compaction in Mechanical Joining Processes of Fiber Reinforced Thermoplastics on Meso Scale.” <i>Key Engineering Materials</i> 1050 (2026): 227–34. <a href=\"https://doi.org/10.4028/p-e8wywr\">https://doi.org/10.4028/p-e8wywr</a>.","mla":"Gröger, Benjamin, et al. “Modelling Deformation Mechanisms Decomposition, Separation and Compaction in Mechanical Joining Processes of Fiber Reinforced Thermoplastics on Meso Scale.” <i>Key Engineering Materials</i>, vol. 1050, Trans Tech Publications, Ltd., 2026, pp. 227–34, doi:<a href=\"https://doi.org/10.4028/p-e8wywr\">10.4028/p-e8wywr</a>.","bibtex":"@article{Gröger_Gerritzen_Hornig_Gude_2026, title={Modelling Deformation Mechanisms Decomposition, Separation and Compaction in Mechanical Joining Processes of Fiber Reinforced Thermoplastics on Meso Scale}, volume={1050}, DOI={<a href=\"https://doi.org/10.4028/p-e8wywr\">10.4028/p-e8wywr</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Gröger, Benjamin and Gerritzen, Johannes and Hornig, Andreas and Gude, Maik}, year={2026}, pages={227–234} }","ama":"Gröger B, Gerritzen J, Hornig A, Gude M. Modelling Deformation Mechanisms Decomposition, Separation and Compaction in Mechanical Joining Processes of Fiber Reinforced Thermoplastics on Meso Scale. <i>Key Engineering Materials</i>. 2026;1050:227-234. doi:<a href=\"https://doi.org/10.4028/p-e8wywr\">10.4028/p-e8wywr</a>"},"user_id":"105344","volume":1050,"page":"227-234","_id":"65582","publisher":"Trans Tech Publications, Ltd.","status":"public"},{"citation":{"ieee":"L. Butzhammer, “Conversion between detector- and rotary-table-related misalignment parameterisations for unified projection-matrix-based geometry calibration in dimensional X-ray computed tomography,” <i>Precision Engineering</i>, vol. 100, pp. 377–400, 2026, doi: <a href=\"https://doi.org/10.1016/j.precisioneng.2026.03.015\">10.1016/j.precisioneng.2026.03.015</a>.","apa":"Butzhammer, L. (2026). Conversion between detector- and rotary-table-related misalignment parameterisations for unified projection-matrix-based geometry calibration in dimensional X-ray computed tomography. <i>Precision Engineering</i>, <i>100</i>, 377–400. <a href=\"https://doi.org/10.1016/j.precisioneng.2026.03.015\">https://doi.org/10.1016/j.precisioneng.2026.03.015</a>","mla":"Butzhammer, Lorenz. “Conversion between Detector- and Rotary-Table-Related Misalignment Parameterisations for Unified Projection-Matrix-Based Geometry Calibration in Dimensional X-Ray Computed Tomography.” <i>Precision Engineering</i>, vol. 100, Elsevier BV, 2026, pp. 377–400, doi:<a href=\"https://doi.org/10.1016/j.precisioneng.2026.03.015\">10.1016/j.precisioneng.2026.03.015</a>.","bibtex":"@article{Butzhammer_2026, title={Conversion between detector- and rotary-table-related misalignment parameterisations for unified projection-matrix-based geometry calibration in dimensional X-ray computed tomography}, volume={100}, DOI={<a href=\"https://doi.org/10.1016/j.precisioneng.2026.03.015\">10.1016/j.precisioneng.2026.03.015</a>}, journal={Precision Engineering}, publisher={Elsevier BV}, author={Butzhammer, Lorenz}, year={2026}, pages={377–400} }","chicago":"Butzhammer, Lorenz. “Conversion between Detector- and Rotary-Table-Related Misalignment Parameterisations for Unified Projection-Matrix-Based Geometry Calibration in Dimensional X-Ray Computed Tomography.” <i>Precision Engineering</i> 100 (2026): 377–400. <a href=\"https://doi.org/10.1016/j.precisioneng.2026.03.015\">https://doi.org/10.1016/j.precisioneng.2026.03.015</a>.","ama":"Butzhammer L. Conversion between detector- and rotary-table-related misalignment parameterisations for unified projection-matrix-based geometry calibration in dimensional X-ray computed tomography. <i>Precision Engineering</i>. 2026;100:377-400. doi:<a href=\"https://doi.org/10.1016/j.precisioneng.2026.03.015\">10.1016/j.precisioneng.2026.03.015</a>","short":"L. Butzhammer, Precision Engineering 100 (2026) 377–400."},"project":[{"name":"TRR 285 - Project Area C","_id":"133"},{"_id":"149","name":"TRR 285 - Subproject C05"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","oa":"1","status":"public","publisher":"Elsevier BV","_id":"65153","page":"377-400","volume":100,"user_id":"7850","publication":"Precision Engineering","date_created":"2026-03-26T15:25:23Z","department":[{"_id":"630"}],"type":"journal_article","publication_identifier":{"issn":["0141-6359"]},"author":[{"last_name":"Butzhammer","first_name":"Lorenz","full_name":"Butzhammer, Lorenz"}],"year":"2026","title":"Conversion between detector- and rotary-table-related misalignment parameterisations for unified projection-matrix-based geometry calibration in dimensional X-ray computed tomography","intvolume":"       100","article_type":"original","date_updated":"2026-05-12T11:38:52Z","publication_status":"published","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://www.sciencedirect.com/science/article/pii/S0141635926000851/pdfft?md5=5f0cd152522e4ff286a245f033269774&pid=1-s2.0-S0141635926000851-main.pdf"}],"doi":"10.1016/j.precisioneng.2026.03.015"},{"page":"161-169","_id":"65483","publisher":"Trans Tech Publications, Ltd.","user_id":"76837","volume":1185,"status":"public","citation":{"bibtex":"@inproceedings{Devulapally_Tröster_2026, title={A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints}, volume={1185}, DOI={<a href=\"https://doi.org/10.4028/p-0tiihi\">10.4028/p-0tiihi</a>}, booktitle={Materials Science Forum}, publisher={Trans Tech Publications, Ltd.}, author={Devulapally, Deekshith Reddy and Tröster, Thomas}, year={2026}, pages={161–169} }","ama":"Devulapally DR, Tröster T. A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints. In: <i>Materials Science Forum</i>. Vol 1185. Trans Tech Publications, Ltd.; 2026:161-169. doi:<a href=\"https://doi.org/10.4028/p-0tiihi\">10.4028/p-0tiihi</a>","mla":"Devulapally, Deekshith Reddy, and Thomas Tröster. “A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints.” <i>Materials Science Forum</i>, vol. 1185, Trans Tech Publications, Ltd., 2026, pp. 161–69, doi:<a href=\"https://doi.org/10.4028/p-0tiihi\">10.4028/p-0tiihi</a>.","chicago":"Devulapally, Deekshith Reddy, and Thomas Tröster. “A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints.” In <i>Materials Science Forum</i>, 1185:161–69. Trans Tech Publications, Ltd., 2026. <a href=\"https://doi.org/10.4028/p-0tiihi\">https://doi.org/10.4028/p-0tiihi</a>.","short":"D.R. Devulapally, T. Tröster, in: Materials Science Forum, Trans Tech Publications, Ltd., 2026, pp. 161–169.","ieee":"D. R. Devulapally and T. Tröster, “A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints,” in <i>Materials Science Forum</i>, 2026, vol. 1185, pp. 161–169, doi: <a href=\"https://doi.org/10.4028/p-0tiihi\">10.4028/p-0tiihi</a>.","apa":"Devulapally, D. R., &#38; Tröster, T. (2026). A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints. <i>Materials Science Forum</i>, <i>1185</i>, 161–169. <a href=\"https://doi.org/10.4028/p-0tiihi\">https://doi.org/10.4028/p-0tiihi</a>"},"project":[{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"name":"TRR 285 - Subproject B01","_id":"140"},{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"language":[{"iso":"eng"}],"doi":"10.4028/p-0tiihi","title":"A Numerical Study on the Mutual Influence of Joint Orientation and Component Geometry in Non-Rotationally Symmetric Clinched Joints","year":"2026","publication_identifier":{"issn":["1662-9752"]},"author":[{"last_name":"Devulapally","first_name":"Deekshith Reddy","full_name":"Devulapally, Deekshith Reddy"},{"first_name":"Thomas","last_name":"Tröster","full_name":"Tröster, Thomas"}],"publication_status":"published","date_updated":"2026-05-12T14:06:08Z","intvolume":"      1185","date_created":"2026-04-22T08:19:27Z","type":"conference","department":[{"_id":"149"},{"_id":"321"},{"_id":"9"}],"publication":"Materials Science Forum","abstract":[{"lang":"eng","text":"<jats:p>Clinched joints with non-rotationally symmetric geometries exhibit orientation-dependent mechanical behavior that is commonly neglected in structural-scale simulations. Reuleaux triangle shaped clinched joints, in particular, show pronounced in-plane anisotropy depending on their orientation. While such effects have been studied at joint and specimen scale, their relevance at the structural level remains largely unexplored. In this work, the influence of joint orientation on the bending response of a joined structure is investigated using numerical simulations. A simplified joint replacement model based on the *CONSTRAINED_SPR2 point-connector formulation in LS-DYNA is employed, with parameters calibrated from previously obtained experimental force displacement data. A hat shaped profile structure subjected to three-point bending is analyzed in a parametric study considering variations in joint orientation, joint spacing, and profile geometry. The results show that joint orientation has little influence during the initial deformation phase but becomes increasingly significant at larger displacements, where joint behavior governs load transfer. Orientation dependent effects are found to influence the global force displacement response and local load redistribution among joints, with magnitudes comparable to those induced by changes in joint spacing and structural geometry. The findings confirm that joint orientation effects remain relevant at the structural level and should be considered in the design of structures assembled using non-rotationally symmetric clinched joints.</jats:p>"}]},{"publication_identifier":{"issn":["2731-6564"]},"author":[{"full_name":"Einwag, Jonathan-Markus","last_name":"Einwag","first_name":"Jonathan-Markus"},{"full_name":"Wiemer, Maximilian","first_name":"Maximilian","last_name":"Wiemer"},{"full_name":"Wartzack, Sandro","first_name":"Sandro","last_name":"Wartzack"},{"full_name":"Goetz, Stefan","last_name":"Goetz","first_name":"Stefan"}],"year":"2026","title":"A hybrid knowledge based and data based approach for efficient clinch joint design","intvolume":"         5","publication_status":"published","date_updated":"2026-05-13T11:50:48Z","language":[{"iso":"eng"}],"article_number":"56","doi":"10.1007/s44245-026-00230-x","issue":"1","publication":"Discover Mechanical Engineering","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n                  <jats:p>The design of clinch joints is a cost- and time-intensive iterative process due to the complex relationships between tool and process parameters and the resulting joint properties. To address this, this contribution proposes a novel hybrid workflow that combines knowledge- and data-based approaches. Relationships are categorized based on their knowledge quality and the need for a quantitative prediction. Well-established, generalizable relationships are formalized in an ontology as design guidelines (no quantification required) or SWRL rules (quantification required) to model expert knowledge. In contrast, hard-to-formalize or not-fully-understood relationships are treated with regression models for continuous or classification models for binary criteria. These approaches are combined in a generic user interface (GUI), where the ontology can be accessed using predefined SPARQL queries to select and adapt parameters using expert knowledge. These parameters are then used as input for the metamodels. The developed workflow is evaluated on two exemplary joining tasks to illustrate, how designers can retrieve similar prior joints, adapt parameters using the encoded design rules and predict resulting joint properties under varying process conditions. In summary, the combination of ontology and metamodels facilitates the transition of trial and error into an efficient, documentable design process.</jats:p>"}],"date_created":"2026-05-13T11:46:44Z","type":"journal_article","status":"public","_id":"65620","publisher":"Springer Science and Business Media LLC","volume":5,"user_id":"107109","citation":{"ama":"Einwag J-M, Wiemer M, Wartzack S, Goetz S. A hybrid knowledge based and data based approach for efficient clinch joint design. <i>Discover Mechanical Engineering</i>. 2026;5(1). doi:<a href=\"https://doi.org/10.1007/s44245-026-00230-x\">10.1007/s44245-026-00230-x</a>","bibtex":"@article{Einwag_Wiemer_Wartzack_Goetz_2026, title={A hybrid knowledge based and data based approach for efficient clinch joint design}, volume={5}, DOI={<a href=\"https://doi.org/10.1007/s44245-026-00230-x\">10.1007/s44245-026-00230-x</a>}, number={156}, journal={Discover Mechanical Engineering}, publisher={Springer Science and Business Media LLC}, author={Einwag, Jonathan-Markus and Wiemer, Maximilian and Wartzack, Sandro and Goetz, Stefan}, year={2026} }","mla":"Einwag, Jonathan-Markus, et al. “A Hybrid Knowledge Based and Data Based Approach for Efficient Clinch Joint Design.” <i>Discover Mechanical Engineering</i>, vol. 5, no. 1, 56, Springer Science and Business Media LLC, 2026, doi:<a href=\"https://doi.org/10.1007/s44245-026-00230-x\">10.1007/s44245-026-00230-x</a>.","short":"J.-M. Einwag, M. Wiemer, S. Wartzack, S. Goetz, Discover Mechanical Engineering 5 (2026).","chicago":"Einwag, Jonathan-Markus, Maximilian Wiemer, Sandro Wartzack, and Stefan Goetz. “A Hybrid Knowledge Based and Data Based Approach for Efficient Clinch Joint Design.” <i>Discover Mechanical Engineering</i> 5, no. 1 (2026). <a href=\"https://doi.org/10.1007/s44245-026-00230-x\">https://doi.org/10.1007/s44245-026-00230-x</a>.","apa":"Einwag, J.-M., Wiemer, M., Wartzack, S., &#38; Goetz, S. (2026). A hybrid knowledge based and data based approach for efficient clinch joint design. <i>Discover Mechanical Engineering</i>, <i>5</i>(1), Article 56. <a href=\"https://doi.org/10.1007/s44245-026-00230-x\">https://doi.org/10.1007/s44245-026-00230-x</a>","ieee":"J.-M. Einwag, M. Wiemer, S. Wartzack, and S. Goetz, “A hybrid knowledge based and data based approach for efficient clinch joint design,” <i>Discover Mechanical Engineering</i>, vol. 5, no. 1, Art. no. 56, 2026, doi: <a href=\"https://doi.org/10.1007/s44245-026-00230-x\">10.1007/s44245-026-00230-x</a>."},"project":[{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"name":"TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 - Subproject B05","_id":"144"}]},{"quality_controlled":"1","project":[{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"_id":"133","name":"TRR 285 - Project Area C"},{"_id":"146","name":"TRR 285 - Subproject C02"}],"citation":{"chicago":"Kaimann, Pia Katharina, Mathias Bobbert, and Gerson Meschut. “Numerical Analysis of the Influence of a Movable Die on Joint Formation in Versatile Self-Piercing Riveting.” <i>Materials Science Forum</i> 1185 (2026): 149–60. <a href=\"https://doi.org/10.4028/p-8jkha8\">https://doi.org/10.4028/p-8jkha8</a>.","short":"P.K. Kaimann, M. Bobbert, G. Meschut, Materials Science Forum 1185 (2026) 149–160.","apa":"Kaimann, P. K., Bobbert, M., &#38; Meschut, G. (2026). Numerical Analysis of the Influence of a Movable Die on Joint Formation in Versatile Self-Piercing Riveting. <i>Materials Science Forum</i>, <i>1185</i>, 149–160. <a href=\"https://doi.org/10.4028/p-8jkha8\">https://doi.org/10.4028/p-8jkha8</a>","ieee":"P. K. Kaimann, M. Bobbert, and G. Meschut, “Numerical Analysis of the Influence of a Movable Die on Joint Formation in Versatile Self-Piercing Riveting,” <i>Materials Science Forum</i>, vol. 1185, pp. 149–160, 2026, doi: <a href=\"https://doi.org/10.4028/p-8jkha8\">10.4028/p-8jkha8</a>.","ama":"Kaimann PK, Bobbert M, Meschut G. Numerical Analysis of the Influence of a Movable Die on Joint Formation in Versatile Self-Piercing Riveting. <i>Materials Science Forum</i>. 2026;1185:149-160. doi:<a href=\"https://doi.org/10.4028/p-8jkha8\">10.4028/p-8jkha8</a>","bibtex":"@article{Kaimann_Bobbert_Meschut_2026, title={Numerical Analysis of the Influence of a Movable Die on Joint Formation in Versatile Self-Piercing Riveting}, volume={1185}, DOI={<a href=\"https://doi.org/10.4028/p-8jkha8\">10.4028/p-8jkha8</a>}, journal={Materials Science Forum}, publisher={Trans Tech Publications, Ltd.}, author={Kaimann, Pia Katharina and Bobbert, Mathias and Meschut, Gerson}, year={2026}, pages={149–160} }","mla":"Kaimann, Pia Katharina, et al. “Numerical Analysis of the Influence of a Movable Die on Joint Formation in Versatile Self-Piercing Riveting.” <i>Materials Science Forum</i>, vol. 1185, Trans Tech Publications, Ltd., 2026, pp. 149–60, doi:<a href=\"https://doi.org/10.4028/p-8jkha8\">10.4028/p-8jkha8</a>."},"status":"public","user_id":"44935","volume":1185,"page":"149-160","_id":"65615","publisher":"Trans Tech Publications, Ltd.","abstract":[{"text":"Self-piercing riveting (SPR) is a well-established joining technique in lightweight construction, as it enables the joining of different materials without requiring pre-drilling. However, the necessary adaptation of the rivet-die combination to the respective material and thickness combinations requires a large number of specific tool sets, which significantly limits the process's flexibility. To overcome these limitations, the versatile self-piercing riveting (V-SPR) was developed, which features enhanced punch actuation in combination with a multi-range-capable rivet . In this context, the concept of a movable die was introduced, which enables an extended process window and adaptable joint formation. Kappe et al. presented initial studies demonstrating the potential of this approach . However, a detailed numerical understanding of the underlying mechanisms remains lacking. This paper presents a numerical analysis of V-SPR with a movable die using a finite element (FE) model. The model includes deformable rivets, sheet metal materials and a kinematically controlled die with adjustable movement. A parameter study was conducted to analyse the influence of die movement on the material flow of the rivet and sheets, as well as joint formation. The simulations were validated using selected experimental data. The goal is to compare the joint geometries achieved with fixed and moving dies and expand the process windows of VSPR. The results demonstrate that the movable-die concept significantly enhances the material flow of both the sheets and the rivet, resulting in a noticeably larger and more reliable interlock than what is achievable with V-SPR using a fixed die. The numerical analyses support the observations reported by Kappe et al. and extend them by providing a quantitative description of how die displacement influences the resulting interlock size. Moreover, the ability to precisely control the die movement makes it possible to join challenging sheet-metal combinations that are difficult to process with conventional setups, particularly in cases involving thicker sheet materials.","lang":"eng"}],"publication":"Materials Science Forum","type":"journal_article","department":[{"_id":"43"},{"_id":"157"}],"date_created":"2026-05-13T07:33:27Z","publication_status":"published","date_updated":"2026-06-15T15:22:59Z","intvolume":"      1185","year":"2026","title":"Numerical Analysis of the Influence of a Movable Die on Joint Formation in Versatile Self-Piercing Riveting","publication_identifier":{"issn":["1662-9752"]},"author":[{"full_name":"Kaimann, Pia Katharina","last_name":"Kaimann","first_name":"Pia Katharina","id":"44935"},{"full_name":"Bobbert, Mathias","first_name":"Mathias","last_name":"Bobbert","id":"7850"},{"id":"32056","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson"}],"doi":"10.4028/p-8jkha8","language":[{"iso":"eng"}]},{"_id":"66067","publisher":"Springer Science and Business Media LLC","volume":79,"user_id":"88725","status":"public","citation":{"short":"A.B. Nordieker, W. Homberg, Transactions of the Indian Institute of Metals 79 (2026).","chicago":"Nordieker, Ansgar Bernhard, and Werner Homberg. “Quenching During Thermomechanical Joining Using Friction Spun Joint Connectors.” <i>Transactions of the Indian Institute of Metals</i> 79, no. 6 (2026). <a href=\"https://doi.org/10.1007/s12666-026-03846-5\">https://doi.org/10.1007/s12666-026-03846-5</a>.","ieee":"A. B. Nordieker and W. Homberg, “Quenching During Thermomechanical Joining Using Friction Spun Joint Connectors,” <i>Transactions of the Indian Institute of Metals</i>, vol. 79, no. 6, Art. no. 90, 2026, doi: <a href=\"https://doi.org/10.1007/s12666-026-03846-5\">10.1007/s12666-026-03846-5</a>.","apa":"Nordieker, A. B., &#38; Homberg, W. (2026). Quenching During Thermomechanical Joining Using Friction Spun Joint Connectors. <i>Transactions of the Indian Institute of Metals</i>, <i>79</i>(6), Article 90. <a href=\"https://doi.org/10.1007/s12666-026-03846-5\">https://doi.org/10.1007/s12666-026-03846-5</a>","bibtex":"@article{Nordieker_Homberg_2026, title={Quenching During Thermomechanical Joining Using Friction Spun Joint Connectors}, volume={79}, DOI={<a href=\"https://doi.org/10.1007/s12666-026-03846-5\">10.1007/s12666-026-03846-5</a>}, number={690}, journal={Transactions of the Indian Institute of Metals}, publisher={Springer Science and Business Media LLC}, author={Nordieker, Ansgar Bernhard and Homberg, Werner}, year={2026} }","ama":"Nordieker AB, Homberg W. Quenching During Thermomechanical Joining Using Friction Spun Joint Connectors. <i>Transactions of the Indian Institute of Metals</i>. 2026;79(6). doi:<a href=\"https://doi.org/10.1007/s12666-026-03846-5\">10.1007/s12666-026-03846-5</a>","mla":"Nordieker, Ansgar Bernhard, and Werner Homberg. “Quenching During Thermomechanical Joining Using Friction Spun Joint Connectors.” <i>Transactions of the Indian Institute of Metals</i>, vol. 79, no. 6, 90, Springer Science and Business Media LLC, 2026, doi:<a href=\"https://doi.org/10.1007/s12666-026-03846-5\">10.1007/s12666-026-03846-5</a>."},"project":[{"_id":"133","name":"TRR 285 - Project Area C"},{"name":"TRR 285 - Subproject C03","_id":"147"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"language":[{"iso":"eng"}],"article_number":"90","doi":"10.1007/s12666-026-03846-5","author":[{"first_name":"Ansgar Bernhard","last_name":"Nordieker","full_name":"Nordieker, Ansgar Bernhard","id":"88725"},{"last_name":"Homberg","first_name":"Werner","full_name":"Homberg, Werner","id":"233"}],"publication_identifier":{"issn":["0972-2815","0975-1645"]},"year":"2026","title":"Quenching During Thermomechanical Joining Using Friction Spun Joint Connectors","intvolume":"        79","publication_status":"published","date_updated":"2026-06-29T06:49:45Z","date_created":"2026-06-29T06:35:48Z","department":[{"_id":"156"}],"type":"journal_article","issue":"6","publication":"Transactions of the Indian Institute of Metals","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n                  <jats:p>Mechanical joining processes have played an increasingly important role in the manufacturing of modern lightweight structures due to a greater variety of materials. The growing number of joining tasks requires a large number of joining elements. Friction spun joint connectors (FSJC) offer an innovative approach that meets the growing demand for flexibility. This process combines rotational movement and axial force to create targeted friction heating, enabling the production of FSJCs and the joining of various sheet metal materials. The shape of the FSJC can be optimally adapted to the joining situation in question, providing a significant advantage in terms of process chain versatility. This paper investigates FSJCs made of the steel grades C45E+C (1.1191) and 115CrV3 (1.2210), the effect of in situ quenching during the joining process. The influences of the essential parameters of rotational speed, feed rate, and FSJC length on the mechanical properties after quenching are being focused on and compared to similar conditions during joining without quenching. At the same time, the material change is analyzed to determine the effect of different alloy approaches on hardness profiles and strength characteristics in cross-tensile testing. For this purpose, systematic test series with varying process parameters are conducted and evaluated using hardness measurements and cross-tensile tests.</jats:p>"}]},{"project":[{"name":"TRR 285 - Project Area B","_id":"132"},{"_id":"143","name":"TRR 285 - Subproject B04"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"citation":{"apa":"Krome, S., Kullmer, G., Weiß, D., Duffe, T., &#38; Ostwald, R. (2026). Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry. <i>Discover Mechanical Engineering</i>, <i>5</i>(1), Article 113. <a href=\"https://doi.org/10.1007/s44245-026-00236-5\">https://doi.org/10.1007/s44245-026-00236-5</a>","ieee":"S. Krome, G. Kullmer, D. Weiß, T. Duffe, and R. Ostwald, “Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry,” <i>Discover Mechanical Engineering</i>, vol. 5, no. 1, Art. no. 113, 2026, doi: <a href=\"https://doi.org/10.1007/s44245-026-00236-5\">10.1007/s44245-026-00236-5</a>.","short":"S. Krome, G. Kullmer, D. Weiß, T. Duffe, R. Ostwald, Discover Mechanical Engineering 5 (2026).","chicago":"Krome, Sven, Gunter Kullmer, Deborah Weiß, Tobias Duffe, and Richard Ostwald. “Experimental Determination of Kinking Angles with Out-of-Phase Mixed-Mode Loading by Means of a Novel Specimen Geometry.” <i>Discover Mechanical Engineering</i> 5, no. 1 (2026). <a href=\"https://doi.org/10.1007/s44245-026-00236-5\">https://doi.org/10.1007/s44245-026-00236-5</a>.","mla":"Krome, Sven, et al. “Experimental Determination of Kinking Angles with Out-of-Phase Mixed-Mode Loading by Means of a Novel Specimen Geometry.” <i>Discover Mechanical Engineering</i>, vol. 5, no. 1, 113, Springer Science and Business Media LLC, 2026, doi:<a href=\"https://doi.org/10.1007/s44245-026-00236-5\">10.1007/s44245-026-00236-5</a>.","ama":"Krome S, Kullmer G, Weiß D, Duffe T, Ostwald R. Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry. <i>Discover Mechanical Engineering</i>. 2026;5(1). doi:<a href=\"https://doi.org/10.1007/s44245-026-00236-5\">10.1007/s44245-026-00236-5</a>","bibtex":"@article{Krome_Kullmer_Weiß_Duffe_Ostwald_2026, title={Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry}, volume={5}, DOI={<a href=\"https://doi.org/10.1007/s44245-026-00236-5\">10.1007/s44245-026-00236-5</a>}, number={1113}, journal={Discover Mechanical Engineering}, publisher={Springer Science and Business Media LLC}, author={Krome, Sven and Kullmer, Gunter and Weiß, Deborah and Duffe, Tobias and Ostwald, Richard}, year={2026} }"},"popular_science":"1","status":"public","volume":5,"user_id":"85414","publisher":"Springer Science and Business Media LLC","_id":"66457","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n                  <jats:p>The service life of fatigue-loaded components that already contain manufacturing‑induced microcracks is primarily governed by the direction and the rate of fatigue-crack growth. When multiple loading components (e.g., tension, compression, shear) act simultaneously but not in temporal synchrony, out‑of‑phase mixed‑mode conditions occur. Such loadings are typical for automotive chassis parts and mechanically joined sheet‑metal assemblies. For optimized design of structural components, the crack kinking angle that occurs under mixed‑mode loading must be predicted as accurately as possible. At present, however, this is still challenging for out‑of‑phase loading conditions. To investigate the associated crack kinking behavior, a novel Compact‑Tension‑Shear‑Mini (CTSM) specimen was developed, enabling controlled generation of plane out-of-phase mixed-mode loading states. Experiments were performed under various combinations of cyclic and static mode I and mode II load components and compared with the analytical predictions of the Out-of-Phase Mixed-Mode (OMM) concept. The measured crack kinking angles showed very good agreement with the predicted values, with mean deviations of only a few degrees, demonstrating the validity and reproducibility of the approach. These findings confirm the applicability of the OMM concept for describing fatigue‑crack propagation under non‑proportional mixed‑mode loading and provide a basis for fatigue‑life assessment of clinched joints and other cyclic multi-axially loaded components.</jats:p>","lang":"eng"}],"issue":"1","publication":"Discover Mechanical Engineering","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"type":"journal_article","date_created":"2026-07-13T11:41:47Z","intvolume":"         5","date_updated":"2026-08-06T10:07:30Z","publication_status":"published","publication_identifier":{"issn":["2731-6564"]},"author":[{"last_name":"Krome","first_name":"Sven","full_name":"Krome, Sven","id":"57245"},{"id":"291","full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter"},{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß"},{"full_name":"Duffe, Tobias","last_name":"Duffe","first_name":"Tobias"},{"orcid":"0000-0003-2147-8444","first_name":"Richard","last_name":"Ostwald","full_name":"Ostwald, Richard","id":"106876"}],"year":"2026","title":"Experimental determination of kinking angles with out-of-phase mixed-mode loading by means of a novel specimen geometry","doi":"10.1007/s44245-026-00236-5","language":[{"iso":"eng"}],"article_number":"113"},{"quality_controlled":"1","project":[{"name":"TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 - Subproject B04","_id":"143"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"citation":{"apa":"Kullmer, G., Krome, S., Weiß, D., Schramm, B., &#38; Ostwald, R. (2026). Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves. <i>Metals</i>, <i>16</i>(8), Article 835. <a href=\"https://doi.org/10.3390/met16080835\">https://doi.org/10.3390/met16080835</a>","ieee":"G. Kullmer, S. Krome, D. Weiß, B. Schramm, and R. Ostwald, “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves,” <i>Metals</i>, vol. 16, no. 8, Art. no. 835, 2026, doi: <a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>.","short":"G. Kullmer, S. Krome, D. Weiß, B. Schramm, R. Ostwald, Metals 16 (2026).","chicago":"Kullmer, Gunter, Sven Krome, Deborah Weiß, Britta Schramm, and Richard Ostwald. “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves.” <i>Metals</i> 16, no. 8 (2026). <a href=\"https://doi.org/10.3390/met16080835\">https://doi.org/10.3390/met16080835</a>.","mla":"Kullmer, Gunter, et al. “Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves.” <i>Metals</i>, vol. 16, no. 8, 835, MDPI AG, 2026, doi:<a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>.","ama":"Kullmer G, Krome S, Weiß D, Schramm B, Ostwald R. Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves. <i>Metals</i>. 2026;16(8). doi:<a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>","bibtex":"@article{Kullmer_Krome_Weiß_Schramm_Ostwald_2026, title={Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves}, volume={16}, DOI={<a href=\"https://doi.org/10.3390/met16080835\">10.3390/met16080835</a>}, number={8835}, journal={Metals}, publisher={MDPI AG}, author={Kullmer, Gunter and Krome, Sven and Weiß, Deborah and Schramm, Britta and Ostwald, Richard}, year={2026} }"},"status":"public","user_id":"85414","volume":16,"_id":"66673","publisher":"MDPI AG","abstract":[{"lang":"eng","text":"<jats:p>Investigating crack growth in sheet metal originating from clinched joints is a major part of predicting the service life of mechanically joined structures. Clinching allows different materials to be joined together. A key task in this context is to perform crack growth simulations in the vicinity of clinched joints considering different load and environmental conditions. This requires formulaic descriptions of the fatigue crack growth rate curves for the materials used. For this purpose, fatigue crack growth rate curves for different R-ratios and temperatures are determined experimentally. Generally, these fatigue crack growth rate curves can be described very well using a novel two-part exponential approach for the formulaic description of fatigue crack growth rate curves developed at Applied Mechanics of Paderborn University (FAM). In this case, three parameters are sufficient to describe the fatigue crack growth rate curves. For the material HCT590X, which is frequently used in clinched joints, it is shown as an example how the parameters vary with the R-ratio and the temperature. In addition, at high crack growth rates, a significant rise in the fatigue crack growth rate curve sometimes occurs at both low and high temperatures. To account for this feature, the two-part exponential approach can be expanded to include a third part.</jats:p>"}],"publication":"Metals","issue":"8","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"date_created":"2026-08-06T10:14:38Z","publication_status":"published","date_updated":"2026-08-06T10:17:54Z","intvolume":"        16","title":"Influence of the R-Ratio and the Temperature on the Coefficients of a Novel Exponential Approach for the Formulaic Description of Fatigue Crack Growth Rate Curves","year":"2026","author":[{"full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter","id":"291"},{"last_name":"Krome","first_name":"Sven","full_name":"Krome, Sven","id":"57245"},{"id":"45673","full_name":"Weiß, Deborah","last_name":"Weiß","first_name":"Deborah"},{"id":"4668","last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta"},{"last_name":"Ostwald","orcid":"0000-0003-2147-8444","first_name":"Richard","full_name":"Ostwald, Richard","id":"106876"}],"publication_identifier":{"issn":["2075-4701"]},"doi":"10.3390/met16080835","article_number":"835","language":[{"iso":"eng"}]},{"abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n                  <jats:p>Pitting corrosion is a critical durability concern for mechanically joined sheet metal components commonly used in automotive and industrial applications. The narrow interfacial gaps created during mechanical joining—typically of tens to hundreds of micrometers—lead to highly localized chemical environments with nonuniform distributions of chloride ions, hydroxide ions, and oxygen. These micro-environmental variations strongly influence pit initiation and growth, however, their impact on joint performance remains insufficiently quantified. The present numerical study investigates the sensitivity of pitting corrosion to local chemical conditions using a phase-field modeling framework. Systematic parameter variations are performed to examine how different electrolyte compositions affect pit evolution within joint interfaces. The results provide insight into corrosion-driven degradation mechanisms in mechanically joined assemblies and support future efforts to integrate corrosion modeling into the performance prediction of sheet metal components.</jats:p>","lang":"eng"}],"publication":"Transactions of the Indian Institute of Metals","issue":"6","type":"journal_article","date_created":"2026-10-05T09:33:18Z","date_updated":"2026-10-05T09:37:59Z","publication_status":"published","intvolume":"        79","year":"2026","title":"Numerical Investigation of Pitting Corrosion in Mechanically Jointed Components","publication_identifier":{"issn":["0972-2815","0975-1645"]},"author":[{"last_name":"Chen","first_name":"Chin","full_name":"Chen, Chin","id":"114741"},{"last_name":"Hofmann","first_name":"Martin","full_name":"Hofmann, Martin"},{"full_name":"Wallmersperger, Thomas","first_name":"Thomas","last_name":"Wallmersperger"}],"doi":"10.1007/s12666-026-03894-x","article_number":"153","language":[{"iso":"eng"}],"project":[{"_id":"132","name":"TRR 285 - Project Area B"},{"name":"TRR 285 - Subproject B03","_id":"142"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"citation":{"bibtex":"@article{Chen_Hofmann_Wallmersperger_2026, title={Numerical Investigation of Pitting Corrosion in Mechanically Jointed Components}, volume={79}, DOI={<a href=\"https://doi.org/10.1007/s12666-026-03894-x\">10.1007/s12666-026-03894-x</a>}, number={6153}, journal={Transactions of the Indian Institute of Metals}, publisher={Springer Science and Business Media LLC}, author={Chen, Chin and Hofmann, Martin and Wallmersperger, Thomas}, year={2026} }","ama":"Chen C, Hofmann M, Wallmersperger T. Numerical Investigation of Pitting Corrosion in Mechanically Jointed Components. <i>Transactions of the Indian Institute of Metals</i>. 2026;79(6). doi:<a href=\"https://doi.org/10.1007/s12666-026-03894-x\">10.1007/s12666-026-03894-x</a>","mla":"Chen, Chin, et al. “Numerical Investigation of Pitting Corrosion in Mechanically Jointed Components.” <i>Transactions of the Indian Institute of Metals</i>, vol. 79, no. 6, 153, Springer Science and Business Media LLC, 2026, doi:<a href=\"https://doi.org/10.1007/s12666-026-03894-x\">10.1007/s12666-026-03894-x</a>.","short":"C. Chen, M. Hofmann, T. Wallmersperger, Transactions of the Indian Institute of Metals 79 (2026).","chicago":"Chen, Chin, Martin Hofmann, and Thomas Wallmersperger. “Numerical Investigation of Pitting Corrosion in Mechanically Jointed Components.” <i>Transactions of the Indian Institute of Metals</i> 79, no. 6 (2026). <a href=\"https://doi.org/10.1007/s12666-026-03894-x\">https://doi.org/10.1007/s12666-026-03894-x</a>.","ieee":"C. Chen, M. Hofmann, and T. Wallmersperger, “Numerical Investigation of Pitting Corrosion in Mechanically Jointed Components,” <i>Transactions of the Indian Institute of Metals</i>, vol. 79, no. 6, Art. no. 153, 2026, doi: <a href=\"https://doi.org/10.1007/s12666-026-03894-x\">10.1007/s12666-026-03894-x</a>.","apa":"Chen, C., Hofmann, M., &#38; Wallmersperger, T. (2026). Numerical Investigation of Pitting Corrosion in Mechanically Jointed Components. <i>Transactions of the Indian Institute of Metals</i>, <i>79</i>(6), Article 153. <a href=\"https://doi.org/10.1007/s12666-026-03894-x\">https://doi.org/10.1007/s12666-026-03894-x</a>"},"status":"public","user_id":"114741","volume":79,"publisher":"Springer Science and Business Media LLC","_id":"67394"},{"status":"public","conference":{"location":"Coimbra, Portugal","name":"4th International Conference on Advanced Joining Processes","start_date":"2025-10-16","end_date":"2025-10-17"},"publisher":"Elsevier BV","_id":"67532","funded_apc":"1","user_id":"104468","volume":14,"citation":{"mla":"Lüder, Stephan, and Hans Christian Schmale. “Influence Analysis of Punch Velocity on Joint Formation, Binding Mechanisms, and Joint Properties in Clinching and Self-Piercing Riveting.” <i>Journal of Advanced Joining Processes</i>, vol. 14, 100421, Elsevier BV, 2026, doi:<a href=\"https://doi.org/10.1016/j.jajp.2026.100421\">10.1016/j.jajp.2026.100421</a>.","bibtex":"@article{Lüder_Schmale_2026, title={Influence analysis of punch velocity on joint formation, binding mechanisms, and joint properties in clinching and self-piercing riveting}, volume={14}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2026.100421\">10.1016/j.jajp.2026.100421</a>}, number={100421}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Lüder, Stephan and Schmale, Hans Christian}, year={2026} }","ama":"Lüder S, Schmale HC. Influence analysis of punch velocity on joint formation, binding mechanisms, and joint properties in clinching and self-piercing riveting. <i>Journal of Advanced Joining Processes</i>. 2026;14. doi:<a href=\"https://doi.org/10.1016/j.jajp.2026.100421\">10.1016/j.jajp.2026.100421</a>","ieee":"S. Lüder and H. C. Schmale, “Influence analysis of punch velocity on joint formation, binding mechanisms, and joint properties in clinching and self-piercing riveting,” <i>Journal of Advanced Joining Processes</i>, vol. 14, Art. no. 100421, 2026, doi: <a href=\"https://doi.org/10.1016/j.jajp.2026.100421\">10.1016/j.jajp.2026.100421</a>.","apa":"Lüder, S., &#38; Schmale, H. C. (2026). Influence analysis of punch velocity on joint formation, binding mechanisms, and joint properties in clinching and self-piercing riveting. <i>Journal of Advanced Joining Processes</i>, <i>14</i>, Article 100421. <a href=\"https://doi.org/10.1016/j.jajp.2026.100421\">https://doi.org/10.1016/j.jajp.2026.100421</a>","short":"S. Lüder, H.C. Schmale, Journal of Advanced Joining Processes 14 (2026).","chicago":"Lüder, Stephan, and Hans Christian Schmale. “Influence Analysis of Punch Velocity on Joint Formation, Binding Mechanisms, and Joint Properties in Clinching and Self-Piercing Riveting.” <i>Journal of Advanced Joining Processes</i> 14 (2026). <a href=\"https://doi.org/10.1016/j.jajp.2026.100421\">https://doi.org/10.1016/j.jajp.2026.100421</a>."},"quality_controlled":"1","project":[{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"name":"TRR 285 - Project Area A","_id":"131"},{"_id":"138","name":"TRR 285 - Subproject A04"}],"oa":"1","title":"Influence analysis of punch velocity on joint formation, binding mechanisms, and joint properties in clinching and self-piercing riveting","year":"2026","author":[{"first_name":"Stephan","last_name":"Lüder","full_name":"Lüder, Stephan"},{"last_name":"Schmale","first_name":"Hans Christian","full_name":"Schmale, Hans Christian"}],"publication_identifier":{"issn":["2666-3309"]},"date_updated":"2026-10-14T11:46:39Z","publication_status":"published","intvolume":"        14","article_type":"original","main_file_link":[{"url":"https://pdf.sciencedirectassets.com/776858/1-s2.0-S2666330926X20015/1-s2.0-S266633092600049X/main.pdf?X-Amz-Security-Token=IQoJb3JpZ2luX2VjEOv%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FwEaCXVzLWVhc3QtMSJHMEUCIQCSo9OWxWvUU0GifhcS3eXdrFnPiKiJx25%2FjpFcfy9gbQIgcdd4G4282SvPcxMe7ew8TnXM7F486hadUeyZXuAoYAEqvAUItP%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FARAFGgwwNTkwMDM1NDY4NjUiDOrYby0ESNphXFC7tiqQBcYnLIZ26QZLhaeNazB4EHmdqOWbXXr658Q8xtQceOV%2BYdSLOVPpX6KRZHda8XhQEjV%2FStimUiNpz0ofAPJ7ikTxi%2BENjLGWmIOlowwSZxRxvvwsoCBX5vsUxNQ%2Fxka5U1F8ax2Z6Mdlyav4Tjhb4P%2FYqH3a0N8YaMHY8l143ZG7gtYpBBm7fVeDdq5XGn1Lkuk6h4KeLuCEnQ6pBBuU3zIiKPeImnyJgrTW5S6rYIoqXJBEvaY%2BxkuYahnaD8UJ3ZhrtC%2FzCmCqImHP30zVFAjJGeuI4kfgB1eSAhZVsmyX2gXDPupcP2pcE3SPZnOiLzG6CmyISZQkVchB4X5nzaH%2FPp7W267t81aFskzrY9z%2FbRbeG7JzAKRZ3e13Oq3Nyd78KG6js0elQhUD5W%2Fd735%2FflyB9FxCg%2BNT4XTc949TL5RDIyC2g62bq1sOyYYnAQkCspnuXNATE7zGNQ7lIFe1A5zNOuMRsNhTrJyjvjMj0TsxMV7EhN6Gf3MOyBRQqAI%2BXcWuiR3CxTvG54bU1fa0smEyWkKc2GkXWsuXBpHhYFl7mCeO5h7igMHZgz6ql18b9diRf4HeKgnggHiXZ6GMxyI20nFY%2Ba1ik581o6LhZytXV6IELTB5DDbJ3W0lKl%2FT%2FcU6eQCVBQ91tNF0bD3x3h3sOidIKK5L92iZzFhrxj0X7A46f3Pn6CyDl1GhCSmv0TAqj2v5x%2BPM%2BIiQqZKZ4Z8N25OXo0HOF%2Ft1NAsgiPQcy1NwwBbG1NoVZqBI9GngbY48ZpfV4nmCFocXgUP%2F%2BABEgpg41hvsJ0Poj88EONIouDWRgu%2BTFIqmd39ky7aV1GaZSy0sAPDjN1a7F%2Fzu8eqOAPIWSVYyTGvJoPWdMNTAvdYGOrEBkBFHgwBpTIKOm6%2BmDOczXmGCGpLXmuPIVwSsGnncaDhh7dz3iLJQPzaJJbG2OIX6DlYyVvcsWIbuMA5Vj4z4YiT6RQJDMXT%2B97tmEb7Ik845o6M73a4yp3gtpYTgg9YAnabMIIAgQJ4L6jNTNUMbowYC%2BED6f3AGXItYnaa2mFo3KDqzTbf773SznJiyb2zmY5DkH9EEQxBOX57T811l2R39PF9ziq%2FYF9d2f1qY%2B5zf&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Date=20261014T113744Z&X-Amz-SignedHeaders=host&X-Amz-Expires=300&X-Amz-Credential=ASIAQ3PHCVTYQWKYMMOO%2F20261014%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Signature=80e84c0b1c41340b7dabda02fdd8815f5284e2b626a2d8ea512c1986af1fe353&hash=6bd54e1cc4b4b5ab321d4fb58f33e91a4e3eaf2e7905d6080905698c78ae3a95&host=68042c943591013ac2b2430a89b270f6af2c76d8dfd086a07176afe7c76c2c61&pii=S266633092600049X&tid=spdf-ea63527f-b42d-47ff-9dac-3cc80b742e5a&sid=12c865366c3181420b58d6d1c025b06e0217gxrqa&type=client&tsoh=d3d3LnNjaWVuY2VkaXJlY3QuY29t&rh=d3d3LnNjaWVuY2VkaXJlY3QuY29t&ua=1e030f530454550350505a&rr=a4a64b3448bfe51b&cc=de","open_access":"1"}],"article_number":"100421","language":[{"iso":"eng"}],"doi":"10.1016/j.jajp.2026.100421","publication":"Journal of Advanced Joining Processes","abstract":[{"text":"In mechanical joining, a wide variety of tool geometries and rivet types have been developed to meet different requirements. For example, this is due to the mechanical properties of sheet materials and the increasing number of material combinations that require joining. However, to address rising costs and sustainability demands or to react to supply chain disruptions, versatile joining processes are needed to reduce the amount of joining equipment required by adapting the process to the joining task. This study examines the influence of punch velocity on the clinching and semi-tubular self-piercing riveting processes, as well as on the binding mechanisms, joint's geometric parameters, and joint properties. The aim is to determine the relevant range of punch velocities based on material properties, such as strain rate dependence, and to assess whether punch velocity can be utilized as a control variable for versatile joining processes. To this aim, similar joints made of steel (HCT590X+Z), aluminum (EN AW-6014), and mixed joints of these materials are examined. The resulting joining forces are analyzed using force-displacement curves to evaluate the influence on the joining process. The form closure is examined using micrographs of the joints' geometric parameters. To characterize the force closure, the connection resistance is measured using the four-wire sensing method, and the load-bearing capacity is determined via a shear tensile test.","lang":"eng"}],"extern":"1","date_created":"2026-10-14T11:08:14Z","keyword":["clinching","self-piercing riveting","punch velocity","binding mechanisms","tensile testing","non-destructive testing"],"type":"journal_article","department":[{"_id":"630"}]},{"article_number":"e70168","language":[{"iso":"eng"}],"doi":"10.1002/pamm.70168","year":"2026","title":"Arbitrary Lagrangian–Eulerian Formulation in a Rotating Frame to Model Friction Spinning","author":[{"first_name":"Johannes","last_name":"Friedlein","full_name":"Friedlein, Johannes"},{"last_name":"Hamed","first_name":"Maien","full_name":"Hamed, Maien"},{"last_name":"Steinmann","first_name":"Paul","full_name":"Steinmann, Paul"},{"first_name":"Julia","last_name":"Mergheim","full_name":"Mergheim, Julia"}],"publication_identifier":{"issn":["1617-7061","1617-7061"]},"date_updated":"2026-09-22T05:55:33Z","publication_status":"published","intvolume":"        26","date_created":"2026-09-22T05:49:02Z","type":"conference","issue":"4","publication":"Proceedings in Applied Mathematics and Mechanics","abstract":[{"text":"Friction spinning is a metal forming process that can be used to manufacture various shapes by rotating a metallic workpiece relative to a blunt tool. When used as a hot metal forming process, the relative velocity between workpiece and tool is increased until substantial heat is generated due to friction. This frictional heat softens the workpiece and allows it to be more readily shaped. However, the process's complex interactions between mechanical, frictional and thermal effects pose significant challenges for numerical modelling. The present study outlines a numerical model that uses the arbitrary Lagrangian–Eulerian (ALE) formulation in a rotating frame to simulate the friction spinning process. The key enabler is an incremental ALE formulation with reference‐velocity‐based remapping that allows for severe deformation and large rotational motion while preserving path‐dependent constitutive history variables. Proof‐of‐concept examples demonstrate its ability to simulate the upsetting of rods and rivets by friction spinning. The potential of the ALE formulation for modelling friction spinning is thereby confirmed, which paves the way for further research, model enhancements, parameter identifications and applications.","lang":"eng"}],"publisher":"Wiley","_id":"67202","user_id":"84990","volume":26,"status":"public","conference":{"name":"96th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2026)","location":"Stuttgart"},"citation":{"ama":"Friedlein J, Hamed M, Steinmann P, Mergheim J. Arbitrary Lagrangian–Eulerian Formulation in a Rotating Frame to Model Friction Spinning. In: <i>Proceedings in Applied Mathematics and Mechanics</i>. Vol 26. Wiley; 2026. doi:<a href=\"https://doi.org/10.1002/pamm.70168\">10.1002/pamm.70168</a>","bibtex":"@inproceedings{Friedlein_Hamed_Steinmann_Mergheim_2026, title={Arbitrary Lagrangian–Eulerian Formulation in a Rotating Frame to Model Friction Spinning}, volume={26}, DOI={<a href=\"https://doi.org/10.1002/pamm.70168\">10.1002/pamm.70168</a>}, number={4e70168}, booktitle={Proceedings in Applied Mathematics and Mechanics}, publisher={Wiley}, author={Friedlein, Johannes and Hamed, Maien and Steinmann, Paul and Mergheim, Julia}, year={2026} }","mla":"Friedlein, Johannes, et al. “Arbitrary Lagrangian–Eulerian Formulation in a Rotating Frame to Model Friction Spinning.” <i>Proceedings in Applied Mathematics and Mechanics</i>, vol. 26, no. 4, e70168, Wiley, 2026, doi:<a href=\"https://doi.org/10.1002/pamm.70168\">10.1002/pamm.70168</a>.","short":"J. Friedlein, M. Hamed, P. Steinmann, J. Mergheim, in: Proceedings in Applied Mathematics and Mechanics, Wiley, 2026.","chicago":"Friedlein, Johannes, Maien Hamed, Paul Steinmann, and Julia Mergheim. “Arbitrary Lagrangian–Eulerian Formulation in a Rotating Frame to Model Friction Spinning.” In <i>Proceedings in Applied Mathematics and Mechanics</i>, Vol. 26. Wiley, 2026. <a href=\"https://doi.org/10.1002/pamm.70168\">https://doi.org/10.1002/pamm.70168</a>.","apa":"Friedlein, J., Hamed, M., Steinmann, P., &#38; Mergheim, J. (2026). Arbitrary Lagrangian–Eulerian Formulation in a Rotating Frame to Model Friction Spinning. <i>Proceedings in Applied Mathematics and Mechanics</i>, <i>26</i>(4), Article e70168. <a href=\"https://doi.org/10.1002/pamm.70168\">https://doi.org/10.1002/pamm.70168</a>","ieee":"J. Friedlein, M. Hamed, P. Steinmann, and J. Mergheim, “Arbitrary Lagrangian–Eulerian Formulation in a Rotating Frame to Model Friction Spinning,” in <i>Proceedings in Applied Mathematics and Mechanics</i>, Stuttgart, 2026, vol. 26, no. 4, doi: <a href=\"https://doi.org/10.1002/pamm.70168\">10.1002/pamm.70168</a>."},"project":[{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"},{"_id":"131","name":"TRR 285 - Project Area A"},{"_id":"139","name":"TRR 285 - Subproject A05"}]},{"date_updated":"2026-09-30T13:37:39Z","publication_status":"published","intvolume":"       345","year":"2026","title":"A new approach for the formulaic description of the crack growth rate curve for long cracks in aluminum alloys","publication_identifier":{"issn":["0013-7944"]},"author":[{"id":"291","first_name":"Gunter","last_name":"Kullmer","full_name":"Kullmer, Gunter"},{"first_name":"Sven","last_name":"Krome","full_name":"Krome, Sven","id":"57245"},{"id":"106876","full_name":"Ostwald, Richard","last_name":"Ostwald","orcid":"0000-0003-2147-8444","first_name":"Richard"}],"doi":"10.1016/j.engfracmech.2026.112568","article_number":"112568","language":[{"iso":"eng"}],"publication":"Engineering Fracture Mechanics","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"date_created":"2026-09-08T04:52:28Z","status":"public","user_id":"57245","volume":345,"_id":"67066","publisher":"Elsevier BV","quality_controlled":"1","project":[{"_id":"132","name":"TRR 285 - Project Area B"},{"name":"TRR 285 - Subproject B04","_id":"143"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"citation":{"apa":"Kullmer, G., Krome, S., &#38; Ostwald, R. (2026). A new approach for the formulaic description of the crack growth rate curve for long cracks in aluminum alloys. <i>Engineering Fracture Mechanics</i>, <i>345</i>, Article 112568. <a href=\"https://doi.org/10.1016/j.engfracmech.2026.112568\">https://doi.org/10.1016/j.engfracmech.2026.112568</a>","ieee":"G. Kullmer, S. Krome, and R. Ostwald, “A new approach for the formulaic description of the crack growth rate curve for long cracks in aluminum alloys,” <i>Engineering Fracture Mechanics</i>, vol. 345, Art. no. 112568, 2026, doi: <a href=\"https://doi.org/10.1016/j.engfracmech.2026.112568\">10.1016/j.engfracmech.2026.112568</a>.","short":"G. Kullmer, S. Krome, R. Ostwald, Engineering Fracture Mechanics 345 (2026).","chicago":"Kullmer, Gunter, Sven Krome, and Richard Ostwald. “A New Approach for the Formulaic Description of the Crack Growth Rate Curve for Long Cracks in Aluminum Alloys.” <i>Engineering Fracture Mechanics</i> 345 (2026). <a href=\"https://doi.org/10.1016/j.engfracmech.2026.112568\">https://doi.org/10.1016/j.engfracmech.2026.112568</a>.","mla":"Kullmer, Gunter, et al. “A New Approach for the Formulaic Description of the Crack Growth Rate Curve for Long Cracks in Aluminum Alloys.” <i>Engineering Fracture Mechanics</i>, vol. 345, 112568, Elsevier BV, 2026, doi:<a href=\"https://doi.org/10.1016/j.engfracmech.2026.112568\">10.1016/j.engfracmech.2026.112568</a>.","ama":"Kullmer G, Krome S, Ostwald R. A new approach for the formulaic description of the crack growth rate curve for long cracks in aluminum alloys. <i>Engineering Fracture Mechanics</i>. 2026;345. doi:<a href=\"https://doi.org/10.1016/j.engfracmech.2026.112568\">10.1016/j.engfracmech.2026.112568</a>","bibtex":"@article{Kullmer_Krome_Ostwald_2026, title={A new approach for the formulaic description of the crack growth rate curve for long cracks in aluminum alloys}, volume={345}, DOI={<a href=\"https://doi.org/10.1016/j.engfracmech.2026.112568\">10.1016/j.engfracmech.2026.112568</a>}, number={112568}, journal={Engineering Fracture Mechanics}, publisher={Elsevier BV}, author={Kullmer, Gunter and Krome, Sven and Ostwald, Richard}, year={2026} }"}}]