@inproceedings{62079,
  abstract     = {{This paper investigates two modeling approaches for the simulation of the deformation and decomposition behavior of preconsolidated rovings above the thermoplastic matrix{\textquoteright} melting temperature. This is crucial for capturing the local material structure after processes introducing highly localized deformation such as mechanical joining processes between metal and fiber reinforced thermoplastics (FRTP). A generic finite element (FE) model is developed, incorporating interfaces discretized through either cohesive zone (CZ) elements or Coulomb friction-based contacts. The material parameters for the FE elements are derived from the initial stiffness of a statistical volume element (SVE) at micro scale modelled with an Arbitrary-Lagrange-Eulerian method for three load cases. The CZ properties calculated are based on the shear viscosity of the composite. The CZ and contact modelling approaches are evaluated using three load cases of the SVE, comparing force-displacement curves. Under simple loading conditions, such as normal pressure tension and bending, both methods produce similar results; however, in complex load cases, the CZ approach shows clear advantages in handling interface interactions and shows robust simulations. The CZ approach thus presents a promising method for simulating roving decomposition in FRTP-metal joining applications above the matrix{\textquoteright} melting temperature.}},
  author       = {{Gröger, Benjamin and Gerritzen, Johannes and Hornig, Andreas and Gude, Maik}},
  booktitle    = {{Sheet Metal 2025}},
  editor       = {{Meschut, G. and Bobbert, M. and Duflou, J. and Fratini, L. and Hagenah, H. and Martins, P. and Merklein, M. and Micari, F.}},
  isbn         = {{978-1-64490-354-4}},
  keywords     = {{Finite Element Method (FEM), Process, Thermoplastic Fiber Reinforced Plastic}},
  pages        = {{268–275}},
  publisher    = {{Materials Research Forum LLC, Materials Research Foundations}},
  title        = {{{Modeling approaches for the decomposition behavior of preconsolidated rovings throughout local deformation processes}}},
  doi          = {{10.21741/9781644903551-33}},
  year         = {{2025}},
}

@inproceedings{62080,
  abstract     = {{The failure behavior of fiber reinforced polymers (FRP) is strongly influenced by their microstructure, i.e. fiber arrangement or local fiber volume content. However, this information cannot be directly used for structural analyses, since it requires a discretization on micrometer level. Therefore, current failure theories do not directly account for such effects, but describe the behavior averaged over an entire specimen. This foundation in experimentally accessible loading conditions leads to purely theory based extension to more complex stress states without direct validation possibilities. This work aims at leveraging micro-scale simulations to obtain failure information under arbitrary loading conditions. The results are propagated to the meso-scale, enabling efficient structural analyses, by means of machine learning (ML). It is shown that the ML model is capable of correctly assessing previously unseen stress states and therefore poses an efficient tool of exploiting information from the micro-scale in larger simulations.}},
  author       = {{Gerritzen, Johannes and Hornig, Andreas and Gude, Maik}},
  booktitle    = {{Sheet Metal 2025}},
  editor       = {{Meschut, G. and Bobbert, M. and Duflou, J. and Fratini, L. and Hagenah, H. and Martins, P. and Merklein, M. and Micari, F.}},
  isbn         = {{978-1-64490-354-4}},
  keywords     = {{Failure, Fiber Reinforced Plastic, Machine Learning}},
  pages        = {{260–267}},
  publisher    = {{Materials Research Forum LLC, Materials Research Foundations}},
  title        = {{{Efficient failure information propagation under complex stress states in fiber reinforced polymers: From micro- to meso-scale using machine learning}}},
  doi          = {{10.21741/9781644903551-32}},
  year         = {{2025}},
}

@article{62081,
  author       = {{Gerritzen, Johannes and Gröger, Benjamin and Zscheyge, Matthias and Hornig, Andreas and Gude, Maik}},
  issn         = {{0264-1275}},
  journal      = {{Materials & Design}},
  publisher    = {{Elsevier BV}},
  title        = {{{3D viscoelastic plastic model coupled with a continuum damage formulation for fiber reinforced polymers}}},
  doi          = {{10.1016/j.matdes.2025.114969}},
  volume       = {{260}},
  year         = {{2025}},
}

@inproceedings{61149,
  abstract     = {{The use of continuous fiber-reinforced thermoplastics (FRTP) in automotive industry increases due to their excellent material properties and possibility of rapid processing. The scale spanning heterogeneity of their material structure and its influence on the material behavior, however, presents significant challenges for most joining technologies, such as self-piercing riveting (SPR). During mechanical joining, the material structure is significantly altered within and around the joining zone, heavily influencing the material behavior. A comprehensive understanding of the underlying phenomena of material alteration during the SPR process is essential as basis for validating numerical simulations. This study examines the material structure at ten stages of a step-setting test of SPR with two FRTP sheets with glass-fiber reinforcement. Utilizing X-ray computed tomography (CT), the damage phenomena within different areas of the setting test are analyzed three-dimensionally and key parameters are quantified. Dominating phenomena during the penetration of the rivet into the laminate are fiber failure (FF), interfiber failure (IFF) and fiber bending, while delamination, fiber kinking and roving splitting are also observed. At the final stages, the bottom layers of the second sheet collapse and form a bulge into the cavity of the die.}},
  author       = {{Dargel, Alrik and Gröger, Benjamin and Schlichter, Malte Christian and Gerritzen, Johannes and Köhler, Daniel and Meschut, Gerson and Gude, Maik and Kupfer, Robert}},
  booktitle    = {{Proceedings of the 8th International Conference on Integrity-Reliability-Failure (IRF2025)}},
  editor       = {{Gomes, J.F. Silva and Meguid, Shaker A.}},
  isbn         = {{9789727523238}},
  keywords     = {{self-piercing riveting, computed tomography, thermoplastic composites, process-structure-interaction}},
  location     = {{Porto}},
  publisher    = {{FEUP}},
  title        = {{{LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION}}},
  doi          = {{10.24840/978-972-752-323-8}},
  year         = {{2025}},
}

@article{63828,
  author       = {{Gerritzen, Johannes and Chopra, Kunal and Reschke, Gregor and Hornig, Andreas and Brosius, Alexander and Gude, Maik}},
  issn         = {{2666-3309}},
  journal      = {{Journal of Advanced Joining Processes}},
  publisher    = {{Elsevier BV}},
  title        = {{{Quality assurance of clinched joints using explainable machine learning}}},
  doi          = {{10.1016/j.jajp.2025.100368}},
  volume       = {{13}},
  year         = {{2025}},
}

@article{62073,
  abstract     = {{<jats:p> A numerical modelling strategy for the direct pin pressing process of metallic pins into continuous fibre-reinforced thermoplastic organosheets is developed. The joining process is performed above the thermoplast’s melting temperature, altering the initial material structure of the composite by fibre rearrangement, which in turn influences the load-bearing capacity of the joint. Therefore, the modelling strategy aims at predicting the resultant material structure after pin pressing. The modelling approach considers both the textile architecture and the process parameters (temperature, tool velocity). A sub-meso modelling framework for the fibres based on a multi-filament approach is used. The interaction between fibres and the thermoplastic melt, as well as the matrix flow, is modelled using the Arbitrary Lagrangian Eulerian method. This allows for the prediction of matrix-rich zones and fibre rearrangement around the pin. The promising results show a good agreement of the resultant material structure in terms of compaction and fibre volume content around the pressed pin. Characteristic parameters show an underestimation of the laminate thickness below the pin. Moreover, an evaluation method for evaluating the orientation changes of the virtual multi-filaments is developed and presented to observe and assess fibre rearrangement and fibre volume content in detail during the numerical process simulation. It can be seen that only fibres around the pin are displaced and not in the whole molten area. Furthermore, it can be observed in detail that the initial position of the fibres in relation to the pin determines whether the fibres are displaced in the in-plane or out-of-plane direction. </jats:p>}},
  author       = {{Gröger, B. and Gerritzen, Johannes and Hornig, A. and Gude, M.}},
  issn         = {{1464-4207}},
  journal      = {{Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}},
  number       = {{12}},
  pages        = {{2286--2298}},
  publisher    = {{SAGE Publications}},
  title        = {{{Developing a numerical modelling strategy for metallic pin pressing processes in fibre reinforced thermoplastics to investigate fibre rearrangement mechanisms during joining}}},
  doi          = {{10.1177/14644207241280035}},
  volume       = {{238}},
  year         = {{2024}},
}

@inproceedings{62078,
  abstract     = {{Fiber reinforced plastics (FRP) exhibit strongly non-linear deformation behavior. To capture this in simulations, intricate models with a variety of parameters are typically used. The identification of values for such parameters is highly challenging and requires in depth understanding of the model itself. Machine learning (ML) is a promising approach for alleviating this challenge by directly predicting parameters based on experimental results. So far, this works mostly for purely artificial data. In this work, two approaches to generalize to experimental data are investigated: a sequential approach, leveraging understanding of the constitutive model and a direct, purely data driven approach. This is exemplary carried out for a highly non-linear strain rate dependent constitutive model for the shear behavior of FRP.The sequential model is found to work better on both artificial and experimental data. It is capable of extracting well suited parameters from the artificial data under realistic conditions. For the experimental data, the model performance depends on the composition of the experimental curves, varying between excellently suiting and reasonable predictions. Taking the expert knowledge into account for ML-model training led to far better results than the purely data driven approach. Robustifying the model predictions on experimental data promises further improvement. }},
  author       = {{Gerritzen, Johannes and Hornig, Andreas and Winkler, Peter and Gude, Maik}},
  booktitle    = {{ECCM21 - Proceedings of the 21st European Conference on Composite Materials}},
  isbn         = {{978-2-912985-01-9}},
  keywords     = {{Direct parameter identification, Machine learning, Convolutional neural networks, Strain rate dependency, Fiber reinforced plastics, woven composites, segmentation, synthetic training data, x-ray computed tomography}},
  pages        = {{1252–1259}},
  publisher    = {{European Society for Composite Materials (ESCM)}},
  title        = {{{Direct parameter identification for highly nonlinear strain rate dependent constitutive models using machine learning}}},
  doi          = {{10.60691/yj56-np80}},
  volume       = {{3}},
  year         = {{2024}},
}

@article{62076,
  author       = {{Gerritzen, Johannes and Hornig, Andreas and Winkler, Peter and Gude, Maik}},
  issn         = {{0927-0256}},
  journal      = {{Computational Materials Science}},
  publisher    = {{Elsevier BV}},
  title        = {{{A methodology for direct parameter identification for experimental results using machine learning — Real world application to the highly non-linear deformation behavior of FRP}}},
  doi          = {{10.1016/j.commatsci.2024.113274}},
  volume       = {{244}},
  year         = {{2024}},
}

@inproceedings{62082,
  author       = {{Gröger, Benjamin and Gerritzen, Johannes and Eckardt, Simon and Gelencsér, Anton and Kunze, Eckart and Hornig, Andreas and Protz, Richard and Gude, Maik}},
  location     = {{Belfast}},
  title        = {{{Modelling of Composite Manufacturing Processes Incorporating Large Fibre Deformations and Process Parameter Interactions - Example Braiding}}},
  year         = {{2023}},
}

@article{34225,
  abstract     = {{Thermoplastic composites (TPCs) are predestined for use in lightweight structures, especially for high-volume applications. In many cases, joining is a key factor for the successful application of TPCs in multi-material systems. Many joining processes for this material group are based on warm forming the joining zone. This results in a change of the local material structure characterised by modified fibre paths, as well as varying fibre contents, which significantly influences the load-bearing behaviour. During the forming process, many different phenomena occur simultaneously at different scales. In this paper, the deformation modes and flow mechanisms of TPCs during forming described in the literature are first analysed. Based on this, three different joining processes are investigated: embedding of inserts, moulding of contour joints, and hotclinching. In order to identify the phenomena occurring in each process and to describe the characteristic resulting material structure in the joining zones, micrographs as well as computed tomography (CT) analyses are performed for both individual process stages and final joining zones.}},
  author       = {{Troschitz, Juliane and Gröger, Benjamin and Würfel, Veit and Kupfer, Robert and Gude, Maik}},
  issn         = {{1996-1944}},
  journal      = {{Materials}},
  number       = {{15}},
  publisher    = {{MDPI AG}},
  title        = {{{Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation}}},
  doi          = {{10.3390/ma15155454}},
  volume       = {{15}},
  year         = {{2022}},
}

@article{30622,
  author       = {{Gröger, B. and Würfel, V. and Hornig, A. and Gude, M.}},
  journal      = {{Journal of Advanced Joining Processes}},
  title        = {{{Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process}}},
  doi          = {{10.1016/j.jajp.2022.100100}},
  volume       = {{5}},
  year         = {{2022}},
}

@article{34255,
  abstract     = {{Deformation of continuous fibre reinforced plastics during thermally-assisted forming or joining processes leads to a change of the initial material structure. The load behaviour of composite parts strongly depends on the resultant material structure. The prediction of this material structure is a challenging task and requires a deep knowledge of the material behaviour above melting temperature and the occurring complex forming phenomena. Through this knowledge, the optimisation of manufacturing parameters for a more efficient and reproducible process can be enabled and are in the focus of many investigations. In the present paper, a simplified pultrusion test rig is developed and presented to investigate the deformation behaviour of a thermoplastic semi-finished fiber product in a forming element. Therefore, different process parameters, like forming element temperature, pulling velocity as well as the forming element geometry, are varied. The deformation behaviour in the forming zone of the thermoplastic preimpregnated continuous glass fibre-reinforced material is investigated by computed tomography and the resultant pulling forces are measured. The results clearly show the correlation between the forming element temperature and the resulting forces due to a change in the viscosity of the thermoplastic matrix and the resulting fiber matrix interaction. In addition, the evaluation of the measurement data shows which forming forces are required to change the shape of the thermoplastic unidirectional material with a rectangular cross-section to a round one.}},
  author       = {{Borowski, Andreas and Gröger, Benjamin and Füßel, René and Gude, Maik}},
  issn         = {{2504-4494}},
  journal      = {{Journal of Manufacturing and Materials Processing}},
  keywords     = {{Industrial and Manufacturing Engineering, Mechanical Engineering, Mechanics of Materials}},
  number       = {{6}},
  publisher    = {{MDPI AG}},
  title        = {{{Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions}}},
  doi          = {{10.3390/jmmp6060146}},
  volume       = {{6}},
  year         = {{2022}},
}

@article{34247,
  abstract     = {{The paper presents research regarding a thermally supported multi-material clinching process (hotclinching) for metal and thermoplastic composite (TPC) sheets: an experimental approach to investigate the flow pressing phenomena during joining. Therefore, an experimental setup is developed to compress the TPC-specimens in out-of-plane direction with different initial TPC thicknesses and varying temperature levels. The deformed specimens are analyzed with computed tomography to investigate the resultant inner material structure at different compaction levels. The results are compared in terms of force-compaction-curves and occurring phenomena during compaction. The change of the material structure is characterized by sliding phenomena and crack initiation and growth.}},
  author       = {{Gröger, Benjamin and Römisch, David and Kraus, Martin and Troschitz, Juliane and Füßel, René and Merklein, Marion and Gude, Maik}},
  issn         = {{2073-4360}},
  journal      = {{Polymers}},
  keywords     = {{Polymers and Plastics, General Chemistry}},
  number       = {{22}},
  publisher    = {{MDPI AG}},
  title        = {{{Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites}}},
  doi          = {{10.3390/polym14225039}},
  volume       = {{14}},
  year         = {{2022}},
}

@article{34256,
  abstract     = {{<jats:p>The 3D shear deformation and failure behaviour of a glass fibre reinforced polypropylene in a shear strain rate range of γ˙=2.2×10−4 to 3.4 1s is investigated. An Iosipescu testing setup on a servo-hydraulic high speed testing unit is used to experimentally characterise the in-plane and out-of-plane behaviour utilising three specimen configurations (12-, 13- and 31-direction). The experimental procedure as well as the testing results are presented and discussed. The measured shear stress–shear strain relations indicate a highly nonlinear behaviour and a distinct rate dependency. Two methods are investigated to derive according material characteristics: a classical engineering approach based on moduli and strengths and a data driven approach based on the curve progression. In all cases a Johnson–Cook based formulation is used to describe rate dependency. The analysis methodologies as well as the derived model parameters are described and discussed in detail. It is shown that a phenomenologically enhanced regression can be used to obtain material characteristics for a generalising constitutive model based on the data driven approach.</jats:p>}},
  author       = {{Gerritzen, Johannes and Hornig, Andreas and Gröger, Benjamin and Gude, Maik}},
  issn         = {{2504-477X}},
  journal      = {{Journal of Composites Science}},
  keywords     = {{Engineering (miscellaneous), Ceramics and Composites}},
  number       = {{10}},
  publisher    = {{MDPI AG}},
  title        = {{{A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters}}},
  doi          = {{10.3390/jcs6100318}},
  volume       = {{6}},
  year         = {{2022}},
}

@article{34254,
  abstract     = {{A virtual test setup for investigating single fibres in a transverse shear flow based on a parallel-plate rheometer is presented. The investigations are carried out to verify a numerical representation of the fluid–structure interaction (FSI), where Arbitrary Lagrangian–Eulerian (ALE) and computational fluid dynamics (CFD) methods are used and evaluated. Both are suitable to simulate flexible solid structures in a transverse shear flow. Comparative investigations with different model setups and increasing complexity are presented. It is shown, that the CFD method with an interface-based coupling approach is not capable of handling small fibre diameters in comparison to large fluid domains due to mesh dependencies at the interface definitions. The ALE method is more suited for this task since fibres are embedded without any mesh restrictions. Element types beam, solid, and discrete are considered for fibre modelling. It is shown that the beam formulation for ALE and 3D solid elements for the CFD method are the preferred options.}},
  author       = {{Gröger, Benjamin and Wang, Jingjing and Bätzel, Tim and Hornig, Andreas and Gude, Maik}},
  issn         = {{1996-1944}},
  journal      = {{Materials}},
  keywords     = {{General Materials Science}},
  number       = {{20}},
  publisher    = {{MDPI AG}},
  title        = {{{Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study}}},
  doi          = {{10.3390/ma15207241}},
  volume       = {{15}},
  year         = {{2022}},
}

@article{34216,
  abstract     = {{Mechanical joining technologies are increasingly used in multi-material lightweight constructions and offer opportunities to create versatile joining processes due to their low heat input, robustness to metallurgical incompatibilities and various process variants. They can be categorised into technologies which require an auxiliary joining element, or do not require an auxiliary joining element. A typical example for a mechanical joining process with auxiliary joining element is self-piercing riveting. A wide range of processes exist which are not requiring an auxiliary joining element. This allows both point-shaped (e.g., by clinching) and line-shaped (e.g., friction stir welding) joints to be produced. In order to achieve versatile processes, challenges exist in particular in the creation of intervention possibilities in the process and the understanding and handling of materials that are difficult to join, such as fiber reinforced plastics (FRP) or high-strength metals. In addition, predictive capability is required, which in particular requires accurate process simulation. Finally, the processes must be measured non-destructively in order to generate control variables in the process or to investigate the cause-effect relationship. This paper covers the state of the art in scientific research concerning mechanical joining and discusses future challenges on the way to versatile mechanical joining processes.}},
  author       = {{Meschut, Gerson and Merklein, M. and Brosius, A. and Drummer, D. and Fratini, L. and Füssel, U. and Gude, M. and Homberg, Werner and Martins, P.A.F. and Bobbert, Mathias and Lechner, M. and Kupfer, R. and Gröger, B. and Han, Daxin and Kalich, J. and Kappe, Fabian and Kleffel, T. and Köhler, D. and Kuball, C.-M. and Popp, J. and Römisch, D. and Troschitz, J. and Wischer, Christian and Wituschek, S. and Wolf, M.}},
  issn         = {{2666-3309}},
  journal      = {{Journal of Advanced Joining Processes}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Engineering (miscellaneous), Chemical Engineering (miscellaneous)}},
  publisher    = {{Elsevier BV}},
  title        = {{{Review on mechanical joining by plastic deformation}}},
  doi          = {{10.1016/j.jajp.2022.100113}},
  volume       = {{5}},
  year         = {{2022}},
}

@article{34068,
  author       = {{Schramm, Britta and Friedlein, Johannes and Gröger, Benjamin and Bielak, Christian Roman and Bobbert, Mathias and Gude, Maik and Meschut, Gerson and Wallmersperger, Thomas and Mergheim, Julia}},
  issn         = {{2666-3309}},
  journal      = {{Journal of Advanced Joining Processes}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Engineering (miscellaneous), Chemical Engineering (miscellaneous)}},
  publisher    = {{Elsevier BV}},
  title        = {{{A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process}}},
  doi          = {{10.1016/j.jajp.2022.100134}},
  year         = {{2022}},
}

@article{63829,
  abstract     = {{<jats:p>The 3D shear deformation and failure behaviour of a glass fibre reinforced polypropylene in a shear strain rate range of γ˙=2.2×10−4 to 3.4 1s is investigated. An Iosipescu testing setup on a servo-hydraulic high speed testing unit is used to experimentally characterise the in-plane and out-of-plane behaviour utilising three specimen configurations (12-, 13- and 31-direction). The experimental procedure as well as the testing results are presented and discussed. The measured shear stress–shear strain relations indicate a highly nonlinear behaviour and a distinct rate dependency. Two methods are investigated to derive according material characteristics: a classical engineering approach based on moduli and strengths and a data driven approach based on the curve progression. In all cases a Johnson–Cook based formulation is used to describe rate dependency. The analysis methodologies as well as the derived model parameters are described and discussed in detail. It is shown that a phenomenologically enhanced regression can be used to obtain material characteristics for a generalising constitutive model based on the data driven approach.</jats:p>}},
  author       = {{Gerritzen, Johannes and Hornig, Andreas and Gröger, Benjamin and Gude, Maik}},
  issn         = {{2504-477X}},
  journal      = {{Journal of Composites Science}},
  number       = {{10}},
  publisher    = {{MDPI AG}},
  title        = {{{A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters}}},
  doi          = {{10.3390/jcs6100318}},
  volume       = {{6}},
  year         = {{2022}},
}

@article{30652,
  abstract     = {{Clinching continuous fibre reinforced thermoplastic composites and metals is challenging due to the low ductility of the composite material. Therefore, a number of novel clinching technologies has been developed specifically for these material combinations. A systematic overview of these advanced clinching methods is given in the present paper. With a focus on process design, three selected clinching methods suitable for different joining tasks are described in detail. The clinching processes including equipment and tools, observed process phenomena and the resultant material structure are compared. Process phenomena during joining are explained in general and compared using computed tomography and micrograph images for each process. In addition the load bearing behaviour and the corresponding failure mechanisms are investigated by means of single-lap shear tests. Finally, the new joining technologies are discussed regarding application relevant criteria.}},
  author       = {{Gröger, B. and Troschitz, J. and Vorderbrüggen, J. and Vogel, C. and Kupfer, R. and Meschut, G. and Gude, M.}},
  journal      = {{Materials}},
  pages        = {{2286}},
  title        = {{{Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies}}},
  doi          = {{10.3390/ma14092286X}},
  volume       = {{14}},
  year         = {{2021}},
}

@article{30698,
  author       = {{Gröger, B. and Köhler, D. and Vorderbrüggen, J. and Troschitz, J. and Kupfer, R. and Meschut, G. and Gude, M.}},
  journal      = {{Production Engineering}},
  title        = {{{Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets}}},
  doi          = {{10.1007/s11740-021-01091-x}},
  year         = {{2021}},
}