---
_id: '21685'
abstract:
- lang: eng
text: 'Presently the implications Additive Manufacturing (AM) on intellectual properties
are discussed in public. Here AM is often mentioned as a driver for product piracy
as it allows to produce and to copy objects with any geometries. Imitators need
a lot of information to copy an object accurately. As reverse engineering has
been identified as the most important information source for product imitators,
AM can also help to reduce the threat of product piracy when correctly applied
in the product development. Due to the layer wise production process that allows
the manufacturing of very complex shapes and geometries, the reverse-engineering
process can be complicated by far. By this, quite contrary to the public opinion,
AM can increase the needed effort of imitators and strongly reduce the economic
efficiency of product piracy. This paper will show different protection measures
and a methodological approach of how to apply these measures to a product. Beside
the protective effect some measures allow a traceability of parts over the product’s
lifecycle and thus support the quality management of AM processes and additively
produced parts. '
author:
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: J.
full_name: Büsching, J.
last_name: Büsching
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Jahnke U, Büsching J, Reiher T, Koch R. Protection measures against product
piracy and application by the use of AM. In: 26th Annual International Solid
Freeform Fabrication Symposium. Vol 26. ; 2015:1601-1611. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf'
apa: Jahnke, U., Büsching, J., Reiher, T., & Koch, R. (2015). Protection measures
against product piracy and application by the use of AM. In 26th Annual International
Solid Freeform Fabrication Symposium (Vol. 26, pp. 1601–1611). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf
bibtex: '@inproceedings{Jahnke_Büsching_Reiher_Koch_2015, title={Protection measures
against product piracy and application by the use of AM}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Jahnke,
U. and Büsching, J. and Reiher, T. and Koch, R.}, year={2015}, pages={1601–1611}
}'
chicago: Jahnke, U., J. Büsching, T. Reiher, and R. Koch. “Protection Measures against
Product Piracy and Application by the Use of AM.” In 26th Annual International
Solid Freeform Fabrication Symposium, 26:1601–11, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf.
ieee: U. Jahnke, J. Büsching, T. Reiher, and R. Koch, “Protection measures against
product piracy and application by the use of AM,” in 26th Annual International
Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1601–1611.
mla: Jahnke, U., et al. “Protection Measures against Product Piracy and Application
by the Use of AM.” 26th Annual International Solid Freeform Fabrication Symposium,
vol. 26, 2015, pp. 1601–11, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf.
short: 'U. Jahnke, J. Büsching, T. Reiher, R. Koch, in: 26th Annual International
Solid Freeform Fabrication Symposium, 2015, pp. 1601–1611.'
date_created: 2021-04-21T07:22:26Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf
intvolume: ' 26'
language:
- iso: eng
page: 1601-1611
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Protection measures against product piracy and application by the use of AM
type: conference
user_id: '55833'
volume: 26
year: '2015'
...
---
_id: '21686'
abstract:
- lang: eng
text: 'Additive Manufacturing (AM) offers high potential due to its freedom of design
for structural parts. Especially in combination with FE-based topology optimization
an optimal use of material and thus significant weight reductions can be expected.
However, the application of AM is hampered by different additional manufacturing
processes along the entire production chain and data handling induced restrictions.Disadvantages
emerge from a lack of adjustment of the entire design process for AM. First the
optimization algorithms are not targeted to the opportunities and restrictions
of AM –represented by design rules – like the design of support structures. Secondly,
the CAD software is not adjusted to AM in particular. Creating freeform shaped
surfaces based on the optimization results is significantly less convenient than
building defined blocks or turning parts following the needs of conventional machining.
The indispensable subsequent interpretation of optimization results regarding
the design rules and the possibilities of CAD-tools counteracts optimal results.
This paper considers different approaches for a Topology Optimization (TO)-shape
regaining on different sample parts including telecommunication satellite parts.
An innovative design methodology is presented getting crucial for creating high
quality designs. '
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Reiher T, Koch R. FE-Optimization and data handling for Additive Manufacturing
of structural parts. In: 26th Annual International Solid Freeform Fabrication
Symposium. Vol 26. ; 2015:1092-1103. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf'
apa: Reiher, T., & Koch, R. (2015). FE-Optimization and data handling for Additive
Manufacturing of structural parts. In 26th Annual International Solid Freeform
Fabrication Symposium (Vol. 26, pp. 1092–1103). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf
bibtex: '@inproceedings{Reiher_Koch_2015, title={FE-Optimization and data handling
for Additive Manufacturing of structural parts}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Reiher,
T. and Koch, R.}, year={2015}, pages={1092–1103} }'
chicago: Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive
Manufacturing of Structural Parts.” In 26th Annual International Solid Freeform
Fabrication Symposium, 26:1092–1103, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf.
ieee: T. Reiher and R. Koch, “FE-Optimization and data handling for Additive Manufacturing
of structural parts,” in 26th Annual International Solid Freeform Fabrication
Symposium, 2015, vol. 26, pp. 1092–1103.
mla: Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive Manufacturing
of Structural Parts.” 26th Annual International Solid Freeform Fabrication
Symposium, vol. 26, 2015, pp. 1092–103, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf.
short: 'T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication
Symposium, 2015, pp. 1092–1103.'
date_created: 2021-04-21T07:22:27Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf
intvolume: ' 26'
language:
- iso: eng
page: 1092-1103
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: FE-Optimization and data handling for Additive Manufacturing of structural
parts
type: conference
user_id: '55833'
volume: 26
year: '2015'
...
---
_id: '21700'
author:
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
citation:
ama: 'Jahnke U, Lindemann C. Sustainable Part Selection for the Use of Additive
Manufacturing in Companies Focussing on Prevention of Product Piracy. In: Inside
3D Printing Conference and Expo. ; 2015.'
apa: Jahnke, U., & Lindemann, C. (2015). Sustainable Part Selection for the
Use of Additive Manufacturing in Companies Focussing on Prevention of Product
Piracy. In Inside 3D Printing Conference and Expo.
bibtex: '@inproceedings{Jahnke_Lindemann_2015, title={Sustainable Part Selection
for the Use of Additive Manufacturing in Companies Focussing on Prevention of
Product Piracy}, booktitle={Inside 3D Printing Conference and Expo}, author={Jahnke,
U. and Lindemann, C.}, year={2015} }'
chicago: Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of
Additive Manufacturing in Companies Focussing on Prevention of Product Piracy.”
In Inside 3D Printing Conference and Expo, 2015.
ieee: U. Jahnke and C. Lindemann, “Sustainable Part Selection for the Use of Additive
Manufacturing in Companies Focussing on Prevention of Product Piracy,” in Inside
3D Printing Conference and Expo, 2015.
mla: Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of Additive
Manufacturing in Companies Focussing on Prevention of Product Piracy.” Inside
3D Printing Conference and Expo, 2015.
short: 'U. Jahnke, C. Lindemann, in: Inside 3D Printing Conference and Expo, 2015.'
date_created: 2021-04-21T07:40:33Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: Inside 3D Printing Conference and Expo
status: public
title: Sustainable Part Selection for the Use of Additive Manufacturing in Companies
Focussing on Prevention of Product Piracy
type: conference
user_id: '55833'
year: '2015'
...
---
_id: '21701'
abstract:
- lang: eng
text: The aerospace sector is characterized by long product life cycles and a need
for lightweight design. Additive manufacturing is a technology that produces parts
layer by layer and thus enables the manufacturing of any complex parts at nearly
no extra costs. A topology optimization enhances the part’s performance for their
special purpose. The results are often complex bionic structures that cannot be
produced with conventional manufacturing technologies. The paper analyzes how
the high potential of this technology can be applied to aerospace parts. A topology
optimization will be conducted for an aircraft part explaining the crucial points
and a life cycle analysis examines the achieved sustainable improvements for the
aircraft’s life cycle.
author:
- first_name: G.
full_name: Deppe, G.
last_name: Deppe
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Deppe G, Reiher T, Koch R. Exploring the cost and lifetime benefits of a topology
optimized aerospace part applying additive manufacturing. In: International
Conference Production Engineering and Management 2015. Vol 5. ; 2015:219-230.
doi:https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf'
apa: Deppe, G., Reiher, T., & Koch, R. (2015). Exploring the cost and lifetime
benefits of a topology optimized aerospace part applying additive manufacturing.
In International Conference Production Engineering and Management 2015
(Vol. 5, pp. 219–230). https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf
bibtex: '@inproceedings{Deppe_Reiher_Koch_2015, title={Exploring the cost and lifetime
benefits of a topology optimized aerospace part applying additive manufacturing},
volume={5}, DOI={https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf},
booktitle={International Conference Production Engineering and Management 2015},
author={Deppe, G. and Reiher, T. and Koch, R.}, year={2015}, pages={219–230} }'
chicago: Deppe, G., T. Reiher, and R. Koch. “Exploring the Cost and Lifetime Benefits
of a Topology Optimized Aerospace Part Applying Additive Manufacturing.” In International
Conference Production Engineering and Management 2015, 5:219–30, 2015. https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf.
ieee: G. Deppe, T. Reiher, and R. Koch, “Exploring the cost and lifetime benefits
of a topology optimized aerospace part applying additive manufacturing,” in International
Conference Production Engineering and Management 2015, 2015, vol. 5, pp. 219–230.
mla: Deppe, G., et al. “Exploring the Cost and Lifetime Benefits of a Topology Optimized
Aerospace Part Applying Additive Manufacturing.” International Conference Production
Engineering and Management 2015, vol. 5, 2015, pp. 219–30, doi:https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf.
short: 'G. Deppe, T. Reiher, R. Koch, in: International Conference Production Engineering
and Management 2015, 2015, pp. 219–230.'
date_created: 2021-04-21T07:40:34Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf
intvolume: ' 5'
language:
- iso: eng
page: 219-230
publication: International Conference Production Engineering and Management 2015
publication_identifier:
isbn:
- '9783941645110'
status: public
title: Exploring the cost and lifetime benefits of a topology optimized aerospace
part applying additive manufacturing
type: conference
user_id: '55833'
volume: 5
year: '2015'
...
---
_id: '21703'
author:
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Lindemann C, Reiher T, Koch R. Guidelines for a sustainable and economic selection
of part candidates for space applications using additive manufacturing. In: Paris
Space Week. ; 2015.'
apa: Lindemann, C., Reiher, T., & Koch, R. (2015). Guidelines for a sustainable
and economic selection of part candidates for space applications using additive
manufacturing. In Paris Space Week.
bibtex: '@inproceedings{Lindemann_Reiher_Koch_2015, title={Guidelines for a sustainable
and economic selection of part candidates for space applications using additive
manufacturing}, booktitle={Paris Space Week}, author={Lindemann, C. and Reiher,
T. and Koch, R.}, year={2015} }'
chicago: Lindemann, C., T. Reiher, and R. Koch. “Guidelines for a Sustainable and
Economic Selection of Part Candidates for Space Applications Using Additive Manufacturing.”
In Paris Space Week, 2015.
ieee: C. Lindemann, T. Reiher, and R. Koch, “Guidelines for a sustainable and economic
selection of part candidates for space applications using additive manufacturing,”
in Paris Space Week, 2015.
mla: Lindemann, C., et al. “Guidelines for a Sustainable and Economic Selection
of Part Candidates for Space Applications Using Additive Manufacturing.” Paris
Space Week, 2015.
short: 'C. Lindemann, T. Reiher, R. Koch, in: Paris Space Week, 2015.'
date_created: 2021-04-21T07:45:00Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: Paris Space Week
status: public
title: Guidelines for a sustainable and economic selection of part candidates for
space applications using additive manufacturing
type: conference
user_id: '55833'
year: '2015'
...
---
_id: '21706'
abstract:
- lang: eng
text: Additive Manufacturing offers a high potential in the aerospace due to its
freedom of design and the ability to manufacture complex and lightweight parts.
Profound changings of the existing processes can be expected for the area of Maintenance,
Repair and Overhaul (MRO) as well. It is described with the help of scenarios
which chances result from the integration of this technology while different applications
are considered. It starts with the implementation of AM as another manufacturing
technology for the repair of spare parts. The precision reduces the effort for
post-processing in comparison to the conventional manufacturing methods such as
the build-up welding. If an unexpected part breakdown occurs and the aircraft
has to stay on ground, there are high demands on the logistics to deliver the
required spare parts from the warehouse as fast as possible. The storage of spare
parts causes extremely high costs and can be considerably reduced with the help
of Additive Manufacturing. Distributed generative manufacturing centers can lead
to a far-reaching restructuring of the existing processes where the required spare
part is manufactured locally on demand. The resulting opportunities and risks
for the involved market actors are shown within the presentation. It is described
how MRO service providers and OEMs are affected by that and which changes of today’s
processes are necessary to implement the presented scenarios.
author:
- first_name: G.
full_name: Deppe, G.
last_name: Deppe
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: Deppe G, Koch R. Exploring the influence of an Additive Manufacturing integration
on future MRO processes in aeronautics. Rtejournal. 2014;2014(11). doi:https://www.rtejournal.de/ausgabe11/3958
apa: Deppe, G., & Koch, R. (2014). Exploring the influence of an Additive Manufacturing
integration on future MRO processes in aeronautics. Rtejournal, 2014(11).
https://www.rtejournal.de/ausgabe11/3958
bibtex: '@article{Deppe_Koch_2014, title={Exploring the influence of an Additive
Manufacturing integration on future MRO processes in aeronautics}, volume={2014},
DOI={https://www.rtejournal.de/ausgabe11/3958},
number={11}, journal={Rtejournal}, author={Deppe, G. and Koch, R.}, year={2014}
}'
chicago: Deppe, G., and R. Koch. “Exploring the Influence of an Additive Manufacturing
Integration on Future MRO Processes in Aeronautics.” Rtejournal 2014, no.
11 (2014). https://www.rtejournal.de/ausgabe11/3958.
ieee: G. Deppe and R. Koch, “Exploring the influence of an Additive Manufacturing
integration on future MRO processes in aeronautics,” Rtejournal, vol. 2014,
no. 11, 2014.
mla: Deppe, G., and R. Koch. “Exploring the Influence of an Additive Manufacturing
Integration on Future MRO Processes in Aeronautics.” Rtejournal, vol. 2014,
no. 11, 2014, doi:https://www.rtejournal.de/ausgabe11/3958.
short: G. Deppe, R. Koch, Rtejournal 2014 (2014).
date_created: 2021-04-21T07:45:03Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: https://www.rtejournal.de/ausgabe11/3958
intvolume: ' 2014'
issue: '11'
language:
- iso: eng
publication: Rtejournal
status: public
title: Exploring the influence of an Additive Manufacturing integration on future
MRO processes in aeronautics
type: journal_article
user_id: '55833'
volume: 2014
year: '2014'
...
---
_id: '21682'
abstract:
- lang: eng
text: At first sight the direct costs of Additive Manufacturing (AM) seem too high
in comparison to traditional manufacturing. Considering the whole lifecycle costs
of parts changes the point of view. Due to the modification of the new production
process and new supply chains during a parts lifecycle, producing companies can
strongly benefit from AM. Therefore, a costing model for assessing lifecycle costs
with regard to specific applications and branches has been developed. The costing
model represents the advantages of AM monetarily. For the evaluation of this model
and the influence factors, different case studies have been performed including
different approaches in part redesign. Deeper research is and will be carried
out with respect to the AM building rates and the comparability of various AM
machines, as these facts are hardly comparable for end users. This paper will
present the methodology and some results of the case studies conducted over the
whole product lifecycle.
author:
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: M.
full_name: Moi, M.
last_name: Moi
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Impact and Influence Factors of Additive
Manufacturing on Product Lifecycle Costs. In: 24th Annual International Solid
Freeform Fabrication Symposium. Vol 24. ; 2013:998-1008. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf'
apa: Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2013). Impact and Influence
Factors of Additive Manufacturing on Product Lifecycle Costs. In 24th Annual
International Solid Freeform Fabrication Symposium (Vol. 24, pp. 998–1008).
http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf
bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2013, title={Impact and Influence
Factors of Additive Manufacturing on Product Lifecycle Costs}, volume={24}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf},
booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2013}, pages={998–1008} }'
chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Impact and Influence Factors
of Additive Manufacturing on Product Lifecycle Costs.” In 24th Annual International
Solid Freeform Fabrication Symposium, 24:998–1008, 2013. http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf.
ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Impact and Influence Factors
of Additive Manufacturing on Product Lifecycle Costs,” in 24th Annual International
Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 998–1008.
mla: Lindemann, C., et al. “Impact and Influence Factors of Additive Manufacturing
on Product Lifecycle Costs.” 24th Annual International Solid Freeform Fabrication
Symposium, vol. 24, 2013, pp. 998–1008, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf.
short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International
Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.'
date_created: 2021-04-21T06:40:35Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf
intvolume: ' 24'
language:
- iso: eng
page: 998-1008
publication: 24th Annual International Solid Freeform Fabrication Symposium
publication_identifier:
isbn:
- 1053-2153
status: public
title: Impact and Influence Factors of Additive Manufacturing on Product Lifecycle
Costs
type: conference
user_id: '55833'
volume: 24
year: '2013'
...
---
_id: '42097'
author:
- first_name: 'Tobias '
full_name: 'Becker, Tobias '
last_name: Becker
citation:
ama: 'Becker T. Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen Durch Interaktive SOPs .; 2013.'
apa: 'Becker, T. (2013). Qualitätsmanagement in der zivilen Gefahrenabwehr :
Optimierung von Führungsprozessen durch interaktive SOPs .'
bibtex: '@book{Becker_2013, title={Qualitätsmanagement in der zivilen Gefahrenabwehr :
Optimierung von Führungsprozessen durch interaktive SOPs }, author={Becker, Tobias
}, year={2013} }'
chicago: 'Becker, Tobias . Qualitätsmanagement in Der Zivilen Gefahrenabwehr :
Optimierung von Führungsprozessen Durch Interaktive SOPs , 2013.'
ieee: 'T. Becker, Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen durch interaktive SOPs . 2013.'
mla: 'Becker, Tobias. Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen Durch Interaktive SOPs . 2013.'
short: 'T. Becker, Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen Durch Interaktive SOPs , 2013.'
date_created: 2023-02-14T12:46:54Z
date_updated: 2023-02-14T12:47:00Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
language:
- iso: eng
- iso: ger
main_file_link:
- url: https://digital.ub.uni-paderborn.de/ubpb/urn/urn:nbn:de:hbz:466:2-12597
page: '181'
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: 'Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung von Führungsprozessen
durch interaktive SOPs '
type: dissertation
user_id: '55833'
year: '2013'
...
---
_id: '21680'
abstract:
- lang: eng
text: The costs of additive manufactured parts often seem too high in comparison
to those of traditionally manufactured parts, as the information about major cost
drivers, especially for additive manufactured metal parts, is weak. Therefore,
a lifecycle analysis of additive manufactured parts is needed to understand and
rate the cost drivers that act as the largest contributors to unit costs, and
to provide a focus for future cost reduction activities for the Additive Manufacturing
(AM) technology. A better understanding of the cost structure will help to compare
the AM costs with the opportunity costs of the classical manufacturing technologies
and will make it easier to justify the use of AM manufactured parts. This paper
will present work in progress and methodology based on a sample investigated with
business process analysis / simulation and activity based costing. In addition,
cost drivers associated with metal AM process will be rated.
author:
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: M.
full_name: Moi, M.
last_name: Moi
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Analyzing Product Lifecycle Costs for
a Better Understanding of Cost Drivers in Additve Manufacturing. In: 23rd Annual
International Solid Freeform Fabrication Symposium. Vol 23. ; 2012:177-188.
doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf'
apa: Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2012). Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.
In 23rd Annual International Solid Freeform Fabrication Symposium (Vol.
23, pp. 177–188). http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2012, title={Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing},
volume={23}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2012}, pages={177–188} }'
chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.” In
23rd Annual International Solid Freeform Fabrication Symposium, 23:177–88,
2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in
23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol.
23, pp. 177–188.
mla: Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding
of Cost Drivers in Additve Manufacturing.” 23rd Annual International Solid
Freeform Fabrication Symposium, vol. 23, 2012, pp. 177–88, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, pp. 177–188.'
date_created: 2021-04-21T06:34:46Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
intvolume: ' 23'
language:
- iso: eng
page: 177-188
publication: 23rd Annual International Solid Freeform Fabrication Symposium
publication_identifier:
isbn:
- 1053-2153
status: public
title: Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers
in Additve Manufacturing
type: conference
user_id: '55833'
volume: 23
year: '2012'
...