---
_id: '44509'
author:
- first_name: Anne
full_name: Kruse, Anne
id: '55833'
last_name: Kruse
citation:
ama: Kruse A. Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns. Vol 27.; 2023.
apa: Kruse, A. (2023). Entwicklung einer Methode zur Integration der Additiven
Fertigung in die Serienproduktion am Beispiel des Lasersinterns (Vol. 27).
bibtex: '@book{Kruse_2023, series={Forschungsberichte des Direct Manufacturing Research
Centers }, title={Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns}, volume={27}, author={Kruse,
Anne}, year={2023}, collection={Forschungsberichte des Direct Manufacturing Research
Centers } }'
chicago: Kruse, Anne. Entwicklung einer Methode zur Integration der Additiven
Fertigung in die Serienproduktion am Beispiel des Lasersinterns. Vol. 27.
Forschungsberichte des Direct Manufacturing Research Centers , 2023.
ieee: A. Kruse, Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns, vol. 27. 2023.
mla: Kruse, Anne. Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns. 2023.
short: A. Kruse, Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns, 2023.
date_created: 2023-05-05T11:24:51Z
date_updated: 2023-05-05T11:24:56Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
- _id: '741'
intvolume: ' 27'
language:
- iso: ger
page: '145'
publication_identifier:
isbn:
- 978-3-8440-8955-4
publication_status: published
series_title: 'Forschungsberichte des Direct Manufacturing Research Centers '
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion
am Beispiel des Lasersinterns
type: dissertation
user_id: '55833'
volume: 27
year: '2023'
...
---
_id: '46957'
abstract:
- lang: eng
text: Modern companies often face various challenges in concept development of products
or systems. Design engineers prepare initial concepts as 3D models. These are
then simulated by computational engineers. If requirements are not met, this necessitates
an iterative process that runs between the design and computation departments
until a valid concept is created. Design methods such as topology optimization
are often used here. The upcoming result is then attempted to be adapted to certain
manufacturing processes. These iteration loops can sometimes take a very long
time, since the model construction and structural optimization generate large
computational efforts. The present work shows on an example a methodical approach,
which represents a first proof of concept, to solving this problem, including
a description of methods and techniques, as well as possible problems in a detailed
analysis concerning training data for neural networks and their abstraction capabilities.
It is evident that additional research work needs to be conducted for further
utilization in order to address all arising questions.
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Niclas
full_name: Meihöfener, Niclas
id: '38611'
last_name: Meihöfener
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Ott M, Meihöfener N, Mozgova I. Methodical Approach to Reducing Design Time
by using Neural Networks in Early Stages of Concept Development. In: Ott M, ed.
Proceedings of the 34rd Annual International Solid Freeform Fabrication Symposium
2023. ; 2023.'
apa: Ott, M., Meihöfener, N., & Mozgova, I. (2023). Methodical Approach to Reducing
Design Time by using Neural Networks in Early Stages of Concept Development. In
M. Ott (Ed.), Proceedings of the 34rd Annual International Solid Freeform Fabrication
Symposium 2023.
bibtex: '@inproceedings{Ott_Meihöfener_Mozgova_2023, place={Austin, Texas, United
States}, title={Methodical Approach to Reducing Design Time by using Neural Networks
in Early Stages of Concept Development}, booktitle={Proceedings of the 34rd Annual
International Solid Freeform Fabrication Symposium 2023}, author={Ott, Manuel
and Meihöfener, Niclas and Mozgova, Iryna}, editor={Ott, Manuel}, year={2023}
}'
chicago: Ott, Manuel, Niclas Meihöfener, and Iryna Mozgova. “Methodical Approach
to Reducing Design Time by Using Neural Networks in Early Stages of Concept Development.”
In Proceedings of the 34rd Annual International Solid Freeform Fabrication
Symposium 2023, edited by Manuel Ott. Austin, Texas, United States, 2023.
ieee: M. Ott, N. Meihöfener, and I. Mozgova, “Methodical Approach to Reducing Design
Time by using Neural Networks in Early Stages of Concept Development,” in Proceedings
of the 34rd Annual International Solid Freeform Fabrication Symposium 2023,
Austin, Texas, United States, 2023.
mla: Ott, Manuel, et al. “Methodical Approach to Reducing Design Time by Using Neural
Networks in Early Stages of Concept Development.” Proceedings of the 34rd Annual
International Solid Freeform Fabrication Symposium 2023, edited by Manuel
Ott, 2023.
short: 'M. Ott, N. Meihöfener, I. Mozgova, in: M. Ott (Ed.), Proceedings of the
34rd Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas,
United States, 2023.'
conference:
end_date: 2023-08-16
location: Austin, Texas, United States
name: Solid Freeform Fabrication Symposium 2023
start_date: 2023-08-14
date_created: 2023-09-11T12:12:50Z
date_updated: 2023-09-18T06:12:51Z
department:
- _id: '741'
- _id: '144'
editor:
- first_name: Manuel
full_name: Ott, Manuel
last_name: Ott
language:
- iso: eng
place: Austin, Texas, United States
publication: Proceedings of the 34rd Annual International Solid Freeform Fabrication
Symposium 2023
quality_controlled: '1'
status: public
title: Methodical Approach to Reducing Design Time by using Neural Networks in Early
Stages of Concept Development
type: conference
user_id: '44204'
year: '2023'
...
---
_id: '36866'
abstract:
- lang: ger
text: "Die additive Fertigung bietet die Möglichkeit, digitale Prototypen dank der\r\nBesonderheit
der werkzeuglosen Fertigung schnellstmöglich in reale Strukturen\r\numzusetzen.
Dieses Verfahren kann jedoch nur dann mit optimaler Geschwindigkeit\r\ngenutzt
werden, wenn Engpässe wirksam vermieden werden können. Einer dieser\r\nEngpässe
ist der Konstruktionsprozess. Gerade im Bereich der additiven Fertigung\r\nsind
in letzter Zeit immer leistungsfähigere Softwarelösungen erschienen, die das\r\nDesign
für die additive Fertigung, einschließlich der meisten Computer-Aided-Design\r\n(CAD)-Aufgaben,
beschleunigen. In vielen Bereichen wird daher bereits versucht, so\r\nviele Schritte
wie möglich zu automatisieren, nicht selten unter Verwendung\r\nneuronaler Netze
und künstlicher Intelligenz. Dieser Beitrag zeigt am Beispiel einer\r\nautomatisierten
Strukturoptimierung eines Stuhls, warum das Nutzen neuronaler\r\nNetze im Konstruktionsprozess
sinnvoll ist, um die Bereiche der konventionellen\r\nTopologieoptimierung und
des Generative Design weiter zu verknüpfen und somit die\r\nProduktentwicklungszeit
zu reduzieren."
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Niclas
full_name: Meihöfener, Niclas
last_name: Meihöfener
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
citation:
ama: 'Ott M, Meihöfener N, Koch R. Neuronale Netze in der Konstruktion zur Ausschöpfung
der Potentiale additiver Fertigungstechnologien. In: Deutscher Verband für Materialforschung
und -prüfung e.V. , ed. Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv
gefertigte Bauteile und Strukturen. Vol 7. Bericht 407 - 7. Tagung des DVM-Arbeitskreises
Additiv gefertigte Bauteile und Strukturen. ; 2022:91-106. doi:10.48447/ADD-2022-014'
apa: Ott, M., Meihöfener, N., & Koch, R. (2022). Neuronale Netze in der Konstruktion
zur Ausschöpfung der Potentiale additiver Fertigungstechnologien. In Deutscher
Verband für Materialforschung und -prüfung e.V. (Ed.), Bericht 407 - 7. Tagung
des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen (Vol. 7,
pp. 91–106). https://doi.org/10.48447/ADD-2022-014
bibtex: '@inproceedings{Ott_Meihöfener_Koch_2022, place={Berlin}, series={Bericht
407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen},
title={Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver
Fertigungstechnologien}, volume={7}, DOI={10.48447/ADD-2022-014},
booktitle={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile
und Strukturen}, author={Ott, Manuel and Meihöfener, Niclas and Koch, Rainer},
editor={Deutscher Verband für Materialforschung und -prüfung e.V. }, year={2022},
pages={91–106}, collection={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv
gefertigte Bauteile und Strukturen} }'
chicago: Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Neuronale Netze in der
Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien.”
In Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile
und Strukturen, edited by Deutscher Verband für Materialforschung und -prüfung
e.V. , 7:91–106. Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte
Bauteile und Strukturen. Berlin, 2022. https://doi.org/10.48447/ADD-2022-014.
ieee: 'M. Ott, N. Meihöfener, and R. Koch, “Neuronale Netze in der Konstruktion
zur Ausschöpfung der Potentiale additiver Fertigungstechnologien,” in Bericht
407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen,
Berlin, 2022, vol. 7, pp. 91–106, doi: 10.48447/ADD-2022-014.'
mla: Ott, Manuel, et al. “Neuronale Netze in der Konstruktion zur Ausschöpfung der
Potentiale additiver Fertigungstechnologien.” Bericht 407 - 7. Tagung des DVM-Arbeitskreises
Additiv gefertigte Bauteile und Strukturen, edited by Deutscher Verband für
Materialforschung und -prüfung e.V. , vol. 7, 2022, pp. 91–106, doi:10.48447/ADD-2022-014.
short: 'M. Ott, N. Meihöfener, R. Koch, in: Deutscher Verband für Materialforschung
und -prüfung e.V. (Ed.), Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv
gefertigte Bauteile und Strukturen, Berlin, 2022, pp. 91–106.'
conference:
end_date: 2022-11-09
location: Berlin
name: 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen
start_date: 2022-11-08
corporate_editor:
- 'Deutscher Verband für Materialforschung und -prüfung e.V. '
date_created: 2023-01-16T08:42:28Z
date_updated: 2023-01-18T08:52:56Z
department:
- _id: '741'
- _id: '144'
doi: 10.48447/ADD-2022-014
intvolume: ' 7'
jel:
- L74
keyword:
- Künstliche Intelligenz
- Neuronale Netze
- 3D-Druck
- Design for Additive Manufacturing
language:
- iso: ger
page: 91-106
place: Berlin
publication: Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile
und Strukturen
publication_status: published
series_title: Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile
und Strukturen
status: public
title: Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver
Fertigungstechnologien
type: conference
user_id: '44204'
volume: 7
year: '2022'
...
---
_id: '36871'
abstract:
- lang: eng
text: "Additive manufacturing offers the option of converting digital prototypes
into real\r\nstructures as quickly as possible by the special property of tool-free
manufacturing. However, this\r\nprocess can only be used at optimum speed if bottlenecks
can be effectively avoided. One of these\r\nconstraints is the design process.
Although modern CAD systems allow a significant increase in\r\nmany areas, this
always requires a person with specific skills (e.g. engineer). In the field of
AM in\r\nparticular, more and more powerful software solutions have recently been
published which\r\naccelerate the Design for Additive Manufacturing, including
most CAD-tasks. In many areas,\r\ntherefore, attempts are already made to automate
relevant design steps as much as possible, more\r\nand more using neural networks
and artificial intelligence. This paper presents how and why such\r\ntechniques
can be used to generate three-dimensional structures quickly and efficiently in
cases of\r\ndeep generative design tasks."
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Niclas
full_name: Meihöfener, Niclas
last_name: Meihöfener
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
citation:
ama: 'Ott M, Meihöfener N, Koch R. Boosting artificial intelligence in design processes
by the use of additive manufacturing. In: Proceedings of the 33rd Annual International
Solid Freeform Fabrication Symposium 2022. Vol 33. Proceedings of the 33rd
Annual International Solid Freeform Fabrication Symposium 2022. ; 2022:696-705.'
apa: Ott, M., Meihöfener, N., & Koch, R. (2022). Boosting artificial intelligence
in design processes by the use of additive manufacturing. Proceedings of the
33rd Annual International Solid Freeform Fabrication Symposium 2022, 33,
696–705.
bibtex: '@inproceedings{Ott_Meihöfener_Koch_2022, place={Austin, Texas}, series={Proceedings
of the 33rd Annual International Solid Freeform Fabrication Symposium 2022}, title={Boosting
artificial intelligence in design processes by the use of additive manufacturing},
volume={33}, booktitle={Proceedings of the 33rd Annual International Solid Freeform
Fabrication Symposium 2022}, author={Ott, Manuel and Meihöfener, Niclas and Koch,
Rainer}, year={2022}, pages={696–705}, collection={Proceedings of the 33rd Annual
International Solid Freeform Fabrication Symposium 2022} }'
chicago: Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Boosting Artificial Intelligence
in Design Processes by the Use of Additive Manufacturing.” In Proceedings of
the 33rd Annual International Solid Freeform Fabrication Symposium 2022, 33:696–705.
Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium
2022. Austin, Texas, 2022.
ieee: M. Ott, N. Meihöfener, and R. Koch, “Boosting artificial intelligence in design
processes by the use of additive manufacturing,” in Proceedings of the 33rd
Annual International Solid Freeform Fabrication Symposium 2022, Austin, Texas,
2022, vol. 33, pp. 696–705.
mla: Ott, Manuel, et al. “Boosting Artificial Intelligence in Design Processes by
the Use of Additive Manufacturing.” Proceedings of the 33rd Annual International
Solid Freeform Fabrication Symposium 2022, vol. 33, 2022, pp. 696–705.
short: 'M. Ott, N. Meihöfener, R. Koch, in: Proceedings of the 33rd Annual International
Solid Freeform Fabrication Symposium 2022, Austin, Texas, 2022, pp. 696–705.'
conference:
end_date: 2022-07-27
location: Austin, Texas
name: Solid Freeform Fabrication Symposium 2022
start_date: 2022-07-25
date_created: 2023-01-16T08:59:19Z
date_updated: 2023-03-30T11:42:25Z
ddc:
- '620'
department:
- _id: '741'
- _id: '144'
file:
- access_level: closed
content_type: application/pdf
creator: maot
date_created: 2023-01-16T08:58:25Z
date_updated: 2023-01-16T08:58:25Z
file_id: '36875'
file_name: Boosting Artificial Intelligence in Design Process.pdf
file_size: 1354163
relation: main_file
success: 1
file_date_updated: 2023-01-16T08:58:25Z
has_accepted_license: '1'
intvolume: ' 33'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://utw10945.utweb.utexas.edu/sites/default/files/2022/Boosting%20Artificial%20Intelligence%20in%20Design%20Process.pdf
oa: '1'
page: 696-705
place: Austin, Texas
publication: Proceedings of the 33rd Annual International Solid Freeform Fabrication
Symposium 2022
publication_status: published
related_material:
link:
- relation: confirmation
url: https://utw10945.utweb.utexas.edu/sites/default/files/2022/Boosting%20Artificial%20Intelligence%20in%20Design%20Process.pdf
series_title: Proceedings of the 33rd Annual International Solid Freeform Fabrication
Symposium 2022
status: public
title: Boosting artificial intelligence in design processes by the use of additive
manufacturing
type: conference
user_id: '44204'
volume: 33
year: '2022'
...
---
_id: '26996'
citation:
ama: Koch R, Gräßler I, Zimmer D, Tröster T, eds. Mehrzieloptimierte und durchgängig
automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess
- Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol 25. Shaker Verlag;
2021.
apa: Koch, R., Gräßler, I., Zimmer, D., & Tröster, T. (Eds.). (2021). Mehrzieloptimierte
und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren
im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix
(Vol. 25). Shaker Verlag.
bibtex: '@book{Koch_Gräßler_Zimmer_Tröster_2021, place={Düren}, series={Forschungsberichte
des Direct Manufacturing Research Centers (DMRC)}, title={Mehrzieloptimierte und
durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren
im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix},
volume={25}, publisher={Shaker Verlag}, year={2021}, collection={Forschungsberichte
des Direct Manufacturing Research Centers (DMRC)} }'
chicago: 'Koch, Rainer, Iris Gräßler, Detmar Zimmer, and Thomas Tröster, eds. Mehrzieloptimierte
und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren
im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix.
Vol. 25. Forschungsberichte des Direct Manufacturing Research Centers (DMRC).
Düren: Shaker Verlag, 2021.'
ieee: 'R. Koch, I. Gräßler, D. Zimmer, and T. Tröster, Eds., Mehrzieloptimierte
und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren
im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix,
vol. 25. Düren: Shaker Verlag, 2021.'
mla: Koch, Rainer, et al., editors. Mehrzieloptimierte und durchgängig automatisierte
Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess
- Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Shaker Verlag, 2021.
short: R. Koch, I. Gräßler, D. Zimmer, T. Tröster, eds., Mehrzieloptimierte und
durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren
im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix,
Shaker Verlag, Düren, 2021.
date_created: 2021-10-28T15:06:42Z
date_updated: 2022-01-06T06:57:32Z
department:
- _id: '152'
- _id: '144'
- _id: '146'
- _id: '321'
editor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
intvolume: ' 25'
language:
- iso: ger
page: '222'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-7932-6
publication_status: published
publisher: Shaker Verlag
series_title: Forschungsberichte des Direct Manufacturing Research Centers (DMRC)
status: public
title: Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive
Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes
OptiAMix
type: book_editor
user_id: '77594'
volume: 25
year: '2021'
...
---
_id: '36845'
author:
- first_name: Anne
full_name: Kruse, Anne
id: '55833'
last_name: Kruse
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Lena
full_name: Risse, Lena
last_name: Risse
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
citation:
ama: Kruse A, Ott M, Risse L, Koch R. 3D-Druck - Eine Technologie als Schlüssel
zur Steigerung der Teilhabe. Published online 2021. doi:10.48447/Add-2021-016
apa: Kruse, A., Ott, M., Risse, L., & Koch, R. (2021). 3D-Druck - Eine Technologie
als Schlüssel zur Steigerung der Teilhabe. 6. Tagung des DVM-Arbeitskreises
Additiv gefertigte Bauteile und Strukturen, Berlin. Deutscher Verband für Materialforschung
und -prüfung e.V. https://doi.org/10.48447/Add-2021-016
bibtex: '@article{Kruse_Ott_Risse_Koch_2021, series={Additiv gefertigte Bauteile
und Strukturen}, title={3D-Druck - Eine Technologie als Schlüssel zur Steigerung
der Teilhabe}, DOI={10.48447/Add-2021-016},
publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Kruse,
Anne and Ott, Manuel and Risse, Lena and Koch, Rainer}, year={2021}, collection={Additiv
gefertigte Bauteile und Strukturen} }'
chicago: Kruse, Anne, Manuel Ott, Lena Risse, and Rainer Koch. “3D-Druck - Eine
Technologie als Schlüssel zur Steigerung der Teilhabe.” Additiv gefertigte Bauteile
und Strukturen. Deutscher Verband für Materialforschung und -prüfung e.V., 2021.
https://doi.org/10.48447/Add-2021-016.
ieee: 'A. Kruse, M. Ott, L. Risse, and R. Koch, “3D-Druck - Eine Technologie als
Schlüssel zur Steigerung der Teilhabe.” Deutscher Verband für Materialforschung
und -prüfung e.V., 2021, doi: 10.48447/Add-2021-016.'
mla: Kruse, Anne, et al. 3D-Druck - Eine Technologie als Schlüssel zur Steigerung
der Teilhabe. Deutscher Verband für Materialforschung und -prüfung e.V., 2021,
doi:10.48447/Add-2021-016.
short: A. Kruse, M. Ott, L. Risse, R. Koch, (2021).
conference:
end_date: 2021-12-04
location: Berlin
name: 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen
start_date: 2021-12-03
date_created: 2023-01-16T06:55:05Z
date_updated: 2023-01-16T09:00:30Z
department:
- _id: '144'
- _id: '219'
doi: 10.48447/Add-2021-016
language:
- iso: ger
publisher: Deutscher Verband für Materialforschung und -prüfung e.V.
series_title: Additiv gefertigte Bauteile und Strukturen
status: public
title: 3D-Druck - Eine Technologie als Schlüssel zur Steigerung der Teilhabe
type: conference
user_id: '55833'
year: '2021'
...
---
_id: '42046'
author:
- first_name: Matthias
full_name: Habdank, Matthias
last_name: Habdank
citation:
ama: Habdank M. Entwicklung eines Konzepts zum qualitätsorientierten Monitoring
von Social Media in der zivilen Gefahrenabwehr. Shaker Verlag; 2020.
apa: Habdank, M. (2020). Entwicklung eines Konzepts zum qualitätsorientierten
Monitoring von Social Media in der zivilen Gefahrenabwehr. Shaker Verlag.
bibtex: '@book{Habdank_2020, place={Düren}, title={Entwicklung eines Konzepts zum
qualitätsorientierten Monitoring von Social Media in der zivilen Gefahrenabwehr},
publisher={Shaker Verlag}, author={Habdank, Matthias}, year={2020} }'
chicago: 'Habdank, Matthias. Entwicklung eines Konzepts zum qualitätsorientierten
Monitoring von Social Media in der zivilen Gefahrenabwehr. Düren: Shaker Verlag,
2020.'
ieee: 'M. Habdank, Entwicklung eines Konzepts zum qualitätsorientierten Monitoring
von Social Media in der zivilen Gefahrenabwehr. Düren: Shaker Verlag, 2020.'
mla: Habdank, Matthias. Entwicklung eines Konzepts zum qualitätsorientierten
Monitoring von Social Media in der zivilen Gefahrenabwehr. Shaker Verlag,
2020.
short: M. Habdank, Entwicklung eines Konzepts zum qualitätsorientierten Monitoring
von Social Media in der zivilen Gefahrenabwehr, Shaker Verlag, Düren, 2020.
date_created: 2023-02-13T10:08:05Z
date_updated: 2023-02-13T10:08:16Z
department:
- _id: '144'
language:
- iso: ger
page: '189'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-7673-8
publisher: Shaker Verlag
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Entwicklung eines Konzepts zum qualitätsorientierten Monitoring von Social
Media in der zivilen Gefahrenabwehr
type: dissertation
user_id: '55833'
year: '2020'
...
---
_id: '22898'
author:
- first_name: Andreas Maximilian
full_name: Schultz, Andreas Maximilian
id: '40599'
last_name: Schultz
- first_name: Christoph
full_name: Lamers, Christoph
last_name: Lamers
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
- first_name: Richard
full_name: Lüke, Richard
last_name: Lüke
- first_name: Torben
full_name: Sauerland, Torben
id: '28007'
last_name: Sauerland
citation:
ama: Schultz AM, Lamers C, Koch R, Lüke R, Sauerland T. IRiS – Intelligente Rettung
im SmartHome. vfdb-Zeitschrift. 2020;4.
apa: Schultz, A. M., Lamers, C., Koch, R., Lüke, R., & Sauerland, T. (2020).
IRiS – Intelligente Rettung im SmartHome. vfdb-Zeitschrift, 4.
bibtex: '@article{Schultz_Lamers_Koch_Lüke_Sauerland_2020, title={IRiS – Intelligente
Rettung im SmartHome}, volume={4}, journal={vfdb-Zeitschrift}, author={Schultz,
Andreas Maximilian and Lamers, Christoph and Koch, Rainer and Lüke, Richard and
Sauerland, Torben}, year={2020} }'
chicago: Schultz, Andreas Maximilian, Christoph Lamers, Rainer Koch, Richard Lüke,
and Torben Sauerland. “IRiS – Intelligente Rettung im SmartHome.” vfdb-Zeitschrift
4 (2020).
ieee: A. M. Schultz, C. Lamers, R. Koch, R. Lüke, and T. Sauerland, “IRiS – Intelligente
Rettung im SmartHome,” vfdb-Zeitschrift, vol. 4, 2020.
mla: Schultz, Andreas Maximilian, et al. “IRiS – Intelligente Rettung im SmartHome.”
vfdb-Zeitschrift, vol. 4, 2020.
short: A.M. Schultz, C. Lamers, R. Koch, R. Lüke, T. Sauerland, vfdb-Zeitschrift
4 (2020).
date_created: 2021-07-29T10:06:11Z
date_updated: 2023-05-03T14:54:37Z
department:
- _id: '144'
intvolume: ' 4'
language:
- iso: ger
publication: vfdb-Zeitschrift
publication_status: published
status: public
title: IRiS – Intelligente Rettung im SmartHome
type: journal_article
user_id: '40599'
volume: 4
year: '2020'
...
---
_id: '24752'
abstract:
- lang: ger
text: 'Die Additiven Fertigungsverfahren stehen im Übergang zur stärken industriellen
Anwendung. Weit mehr als die Hälfte aller mittelständischen Unternehmen sehen
die Technologien zukünftig als etablierte Verfahren oder gar Schlüsseltechnologien
im eigenen Unter-nehmen. Dass der Schritt zur industriellen Nutzung bislang allerdings
nicht erfolgt ist, liegt oft am Prozess der Technologieintegration selbst. Unternehmen
gelingt es nicht, die fehlende Expertise aufzubauen, die Akzeptanz gegenüber der
Additiven Fertigung erfolg-reich zu stärken und die hohen Kosten zu beherrschen.
Diese Problematik bestätigen neben Studien des Industriearbeitskreises Light Alliance
und der National Association of Manufacturers (USA) auch der Richtungswandel der
Forschungsförderung des Bundesministeriums für Bildung und Forschung. Vor diesem
Hintergrund gilt es, die auftretenden Hindernisse der Technologieintegration differenziert
zu betrachten und erforderliche spezifische Lösungsmethoden in einzelnen Handlungsfeldern
abzuleiten. Für diese Handlungsfelder sind anschließend Vorgehensmodelle zu entwickeln,
wodurch Hemmnisse wie die hohen Kosten gelöst werden sollen. Die resultierenden
Modelle sind in eine Gesamtsystematik zu überführen, welche Unternehmen unter
Berücksichtigung der bestehenden Unternehmensprozesse und -strukturen bei der
prozessbasierten Technologieintegration der Additiven Fertigung im Unternehmen
unterstützt. Die Anwendbarkeit des Verfahrens wird durch eine industrielle Fallstudie
untermauert und validiert. '
author:
- first_name: 'Johannes '
full_name: 'Rohde, Johannes '
last_name: Rohde
citation:
ama: Rohde J. Prozessbasierte Technologieintegration der Additiven Fertigung
in Unternehmen. Vol 16. Shaker Verlag; 2019.
apa: Rohde, J. (2019). Prozessbasierte Technologieintegration der Additiven Fertigung
in Unternehmen (Vol. 16). Shaker Verlag.
bibtex: '@book{Rohde_2019, place={Düren}, series={Forschungsbericht des Direct Manufacturing
Research Centers}, title={Prozessbasierte Technologieintegration der Additiven
Fertigung in Unternehmen}, volume={16}, publisher={Shaker Verlag}, author={Rohde,
Johannes }, year={2019}, collection={Forschungsbericht des Direct Manufacturing
Research Centers} }'
chicago: 'Rohde, Johannes . Prozessbasierte Technologieintegration der Additiven
Fertigung in Unternehmen. Vol. 16. Forschungsbericht des Direct Manufacturing
Research Centers. Düren: Shaker Verlag, 2019.'
ieee: 'J. Rohde, Prozessbasierte Technologieintegration der Additiven Fertigung
in Unternehmen, vol. 16. Düren: Shaker Verlag, 2019.'
mla: Rohde, Johannes. Prozessbasierte Technologieintegration der Additiven Fertigung
in Unternehmen. Shaker Verlag, 2019.
short: J. Rohde, Prozessbasierte Technologieintegration der Additiven Fertigung
in Unternehmen, Shaker Verlag, Düren, 2019.
date_created: 2021-09-21T11:31:43Z
date_updated: 2022-01-06T06:56:33Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
intvolume: ' 16'
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-7090-3&search=yes
page: '182'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-7090-3
publisher: Shaker Verlag
series_title: Forschungsbericht des Direct Manufacturing Research Centers
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Prozessbasierte Technologieintegration der Additiven Fertigung in Unternehmen
type: dissertation
user_id: '55833'
volume: 16
year: '2019'
...
---
_id: '24759'
abstract:
- lang: ger
text: 'Produktpiraterie und damit einhergehende Imitationen gefährden neben dem
wirtschaftlichen Erfolg der Unternehmen am Beispiel des deutschen Maschinen- und
Anlagenbaus auch den sicheren Betrieb von Anlagen und somit von Leib und Leben.
Im Kontext der Produktpiraterie werden Additive Fertigungsverfahren durch den
global möglichen, nahezu unkontrollierbaren Datenaustausch häufig als Treibertechnologie
dargestellt. Dem entgegenstehend werden die Additiven Fertigungsverfahren aber
in der Literatur auch sehr undifferenziert als mögliche Produktschutzmaßnahme
aufgeführt. Darauf deuten auch die Ergebnisse einer Studie des Verbands Deutscher
Maschinen- und Anlagenbau e.V., der auf das Reverse Engineering als relevanteste
Informationsquelle für Imitatoren verweist. Vor diesem Hintergrund gilt es, die
Motivation und das Vorgehen der Imitatoren zu untersuchen und den technischen
und wirtschaftlichen Potentialen der Additiven Fertigungsverfahren differenziert
gegenüberzustellen. Darauf aufbauend ist ein systematisches Vorgehen zum präventiven
Produktschutz durch Additive Fertigungsverfahren zu entwickeln. Die resultierende
Systematik führt die Unternehmen unter Berücksichtigung des präventiven Produktschutzes
schrittweise durch die Produktentstehung und unterstützt bei der Identifikation
schützenswerter Funktionen sowie der Auswahl und Implementierung geeigneter additiver
Schutzpotentiale. Die Anwendbarkeit des Verfahrens wird durch eine industrielle
Fallstudie untermauert und validiert. '
author:
- first_name: Ulrich
full_name: Jahnke, Ulrich
last_name: Jahnke
citation:
ama: Jahnke U. Systematik zum präventiven Schutz vor Produktpiraterie durch Additive
Fertigungsverfahren. Vol 13. Shaker Verlag; 2019.
apa: Jahnke, U. (2019). Systematik zum präventiven Schutz vor Produktpiraterie
durch Additive Fertigungsverfahren (Vol. 13). Shaker Verlag.
bibtex: '@book{Jahnke_2019, place={Düren}, series={Forschungsbericht des Direct
Manufacturing Research Centers}, title={Systematik zum präventiven Schutz vor
Produktpiraterie durch Additive Fertigungsverfahren}, volume={13}, publisher={Shaker
Verlag}, author={Jahnke, Ulrich}, year={2019}, collection={Forschungsbericht des
Direct Manufacturing Research Centers} }'
chicago: 'Jahnke, Ulrich. Systematik zum präventiven Schutz vor Produktpiraterie
durch Additive Fertigungsverfahren. Vol. 13. Forschungsbericht des Direct
Manufacturing Research Centers. Düren: Shaker Verlag, 2019.'
ieee: 'U. Jahnke, Systematik zum präventiven Schutz vor Produktpiraterie durch
Additive Fertigungsverfahren, vol. 13. Düren: Shaker Verlag, 2019.'
mla: Jahnke, Ulrich. Systematik zum präventiven Schutz vor Produktpiraterie durch
Additive Fertigungsverfahren. Shaker Verlag, 2019.
short: U. Jahnke, Systematik zum präventiven Schutz vor Produktpiraterie durch Additive
Fertigungsverfahren, Shaker Verlag, Düren, 2019.
date_created: 2021-09-21T11:34:16Z
date_updated: 2022-01-06T06:56:34Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
intvolume: ' 13'
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-6738-5&search=yes
page: '208'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-6738-5
publisher: Shaker Verlag
series_title: Forschungsbericht des Direct Manufacturing Research Centers
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Systematik zum präventiven Schutz vor Produktpiraterie durch Additive Fertigungsverfahren
type: dissertation
user_id: '55833'
volume: 13
year: '2019'
...
---
_id: '24761'
abstract:
- lang: ger
text: "Die additive Fertigung als werkzeugloses Fertigungsverfahren bietet zahlreiche
neue Möglichkeiten in der technischen Produktgestaltung. Insbesondere auf Leichtbau
optimierte, hochkomplexe Strukturen lassen sich hiermit wirtschaftlich fertigen.
Die Bauteile müssen jedoch auch speziell auf die Verfahren angepasst sein, um
sicher, fehlerfrei und kostengünstig produziert werden zu können. Mit konventionellen
Konstruktionsverfahren sind solche Strukturen nur schwer erzeugbar.\r\nIm Rahmen
dieser Arbeit wird daher eine Methodik zur intelligenten Optimierung von Produktgeometrien,
angepasst an die additive Fertigung, entwickelt. Dies beinhaltet die automatische
Erzeugung von anwendungsfallspezifisch optimierten Geometrien sowie deren Überführung
in Datenstrukturen, welche in konventionellen CAD-Systemen nutzbar sind. Als grundlegendes
Werkzeug wird dabei die Topologieoptimierung verwendet, welche hochaufgelöst durchgeführt
und im Anschluss mit hoher Qualität geglättet und weiterverarbeitet werden muss.
Hierzu wurde ein durchgängiger voxelbasierter Ansatz gefunden, der auch die Anpassung
der Geometrien an die additive Fertigung erlaubt. Die Entwicklung und Funktionalität
des Ansatzes wird auf Basis mehrerer Beispielbauteile gezeigt. Das Ergebnis der
Optimierungen sind hochkomplexe, im Detail optimierte und an die additive Fertigung
angepasste Strukturen. "
author:
- first_name: Thomas
full_name: Reiher, Thomas
last_name: Reiher
citation:
ama: Reiher T. Intelligente Optimierung von Produktgeometrien für die additive
Fertigung. Vol 12. Shaker Verlag; 2019.
apa: Reiher, T. (2019). Intelligente Optimierung von Produktgeometrien für die
additive Fertigung (Vol. 12). Shaker Verlag.
bibtex: '@book{Reiher_2019, place={Düren}, series={Forschungsbericht des Direct
Manufacturing Research Centers}, title={Intelligente Optimierung von Produktgeometrien
für die additive Fertigung}, volume={12}, publisher={Shaker Verlag}, author={Reiher,
Thomas}, year={2019}, collection={Forschungsbericht des Direct Manufacturing Research
Centers} }'
chicago: 'Reiher, Thomas. Intelligente Optimierung von Produktgeometrien für
die additive Fertigung. Vol. 12. Forschungsbericht des Direct Manufacturing
Research Centers. Düren: Shaker Verlag, 2019.'
ieee: 'T. Reiher, Intelligente Optimierung von Produktgeometrien für die additive
Fertigung, vol. 12. Düren: Shaker Verlag, 2019.'
mla: Reiher, Thomas. Intelligente Optimierung von Produktgeometrien für die additive
Fertigung. Shaker Verlag, 2019.
short: T. Reiher, Intelligente Optimierung von Produktgeometrien für die additive
Fertigung, Shaker Verlag, Düren, 2019.
date_created: 2021-09-21T11:37:21Z
date_updated: 2022-01-06T06:56:34Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
intvolume: ' 12'
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-6728-6&search=yes
page: '180'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-6728-6
publisher: Shaker Verlag
series_title: Forschungsbericht des Direct Manufacturing Research Centers
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Intelligente Optimierung von Produktgeometrien für die additive Fertigung
type: dissertation
user_id: '55833'
volume: 12
year: '2019'
...
---
_id: '24762'
abstract:
- lang: ger
text: Industrieunternehmen versuchen zunehmend das technologische und ökonomische
Potential des schichtbasierten Fertigungsansatzes der additiven Fertigung vorteilhaft
für sich einzusetzen. Problematisch ist dabei jedoch die geringe Erfahrung der
Unternehmen mit der additiven Fertigung und ihren Besonderheiten. Ein Vergleich
mit anderen Fertigungsverfahren muss dabei über eine reine Kostenkalkulation hinausgehen,
um zusätzliche Potentiale und Einschränkungen abwägen zu können. Die vorliegende
Arbeit gibt daher einen Überblick über die wesentlichen Einflussfaktoren Kosten,
Zeit und Qualität und es wird auf dieser Basis eine Entscheidungsunterstützung
entwickelt, die bei der Identifizierung vorteilhafter Einsatzmöglichkeiten für
die additive Fertigung hilft. Da die additive Technologie auch signifikante Änderungen
im Bereich der Supply Chain erzielen kann, liegt der Fokus des Einsatzgebietes
auf der zeitkritischen Ersatzteilversorgung, betrachtet am Beispiel der Luftfahrtindustrie.
In diesem Kontext ist es Ziel und Zweck der Arbeit, die oftmals isoliert betrachteten
drei Bereiche Kosten, Zeit und Qualität zu einem ganzheitlichen Vergleich zu kombinieren.
Die entwickelte Entscheidungsunterstützung ist dabei auf Basis einer funktionserweiterten
Tabellenkalkulation als Demonstrator umgesetzt worden.
author:
- first_name: Gereon
full_name: Deppe, Gereon
last_name: Deppe
citation:
ama: Deppe G. Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver
Fertigung in der zeitkritischen Ersatzteilversorgung. Vol 9. Shaker Verlag;
2019.
apa: Deppe, G. (2019). Entwicklung einer Entscheidungsunterstützung für den Einsatz
Additiver Fertigung in der zeitkritischen Ersatzteilversorgung (Vol. 9). Shaker
Verlag.
bibtex: '@book{Deppe_2019, place={Düren}, series={Forschungsbericht des Direct Manufacturing
Research Centers}, title={Entwicklung einer Entscheidungsunterstützung für den
Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung}, volume={9},
publisher={Shaker Verlag}, author={Deppe, Gereon}, year={2019}, collection={Forschungsbericht
des Direct Manufacturing Research Centers} }'
chicago: 'Deppe, Gereon. Entwicklung einer Entscheidungsunterstützung für den
Einsatz Additiver Fertigung in der zeitkritischen Ersatzteilversorgung. Vol.
9. Forschungsbericht des Direct Manufacturing Research Centers. Düren: Shaker
Verlag, 2019.'
ieee: 'G. Deppe, Entwicklung einer Entscheidungsunterstützung für den Einsatz
Additiver Fertigung in der zeitkritischen Ersatzteilversorgung, vol. 9. Düren:
Shaker Verlag, 2019.'
mla: Deppe, Gereon. Entwicklung einer Entscheidungsunterstützung für den Einsatz
Additiver Fertigung in der zeitkritischen Ersatzteilversorgung. Shaker Verlag,
2019.
short: G. Deppe, Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver
Fertigung in der zeitkritischen Ersatzteilversorgung, Shaker Verlag, Düren, 2019.
date_created: 2021-09-21T11:39:07Z
date_updated: 2022-01-06T06:56:34Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
intvolume: ' 9'
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-6402-5&search=yes
page: '180'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-6402-5
publisher: Shaker Verlag
series_title: Forschungsbericht des Direct Manufacturing Research Centers
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Entwicklung einer Entscheidungsunterstützung für den Einsatz Additiver Fertigung
in der zeitkritischen Ersatzteilversorgung
type: dissertation
user_id: '55833'
volume: 9
year: '2019'
...
---
_id: '36846'
author:
- first_name: Anne
full_name: Kruse, Anne
id: '55833'
last_name: Kruse
- first_name: Michael
full_name: Mummert, Michael
last_name: Mummert
citation:
ama: Kruse A, Mummert M. Mit 3D-Druck umfassende Teilhabe möglich machen . Werkstatt:Dialog.
2019;(4):34-35.
apa: Kruse, A., & Mummert, M. (2019). Mit 3D-Druck umfassende Teilhabe möglich
machen . Werkstatt:Dialog, 4, 34–35.
bibtex: '@article{Kruse_Mummert_2019, title={Mit 3D-Druck umfassende Teilhabe möglich
machen }, number={4}, journal={Werkstatt:Dialog}, author={Kruse, Anne and Mummert,
Michael}, year={2019}, pages={34–35} }'
chicago: 'Kruse, Anne, and Michael Mummert. “Mit 3D-Druck umfassende Teilhabe möglich
machen .” Werkstatt:Dialog, no. 4 (2019): 34–35.'
ieee: A. Kruse and M. Mummert, “Mit 3D-Druck umfassende Teilhabe möglich machen
,” Werkstatt:Dialog, no. 4, pp. 34–35, 2019.
mla: Kruse, Anne, and Michael Mummert. “Mit 3D-Druck umfassende Teilhabe möglich
machen .” Werkstatt:Dialog, no. 4, 2019, pp. 34–35.
short: A. Kruse, M. Mummert, Werkstatt:Dialog (2019) 34–35.
date_created: 2023-01-16T07:05:06Z
date_updated: 2023-01-16T07:05:23Z
department:
- _id: '144'
- _id: '219'
issue: '4'
language:
- iso: ger
page: 34-35
publication: Werkstatt:Dialog
publication_identifier:
issn:
- 1864-2993
status: public
title: 'Mit 3D-Druck umfassende Teilhabe möglich machen '
type: journal_article
user_id: '55833'
year: '2019'
...
---
_id: '42060'
author:
- first_name: 'Christina '
full_name: 'Schäfer, Christina '
last_name: Schäfer
citation:
ama: Schäfer C. Entwicklung eines Vorgehens zum Safety Assessment für sicherheits-kritische
Informationssysteme in der zivilen Gefahrenabwehr am Beispiel der Feuerwehr.
tredition GmbH; 2019.
apa: Schäfer, C. (2019). Entwicklung eines Vorgehens zum Safety Assessment für
sicherheits-kritische Informationssysteme in der zivilen Gefahrenabwehr am Beispiel
der Feuerwehr. tredition GmbH.
bibtex: '@book{Schäfer_2019, place={Hamburg}, title={Entwicklung eines Vorgehens
zum Safety Assessment für sicherheits-kritische Informationssysteme in der zivilen
Gefahrenabwehr am Beispiel der Feuerwehr}, publisher={tredition GmbH}, author={Schäfer,
Christina }, year={2019} }'
chicago: 'Schäfer, Christina . Entwicklung eines Vorgehens zum Safety Assessment
für sicherheits-kritische Informationssysteme in der zivilen Gefahrenabwehr am
Beispiel der Feuerwehr. Hamburg: tredition GmbH, 2019.'
ieee: 'C. Schäfer, Entwicklung eines Vorgehens zum Safety Assessment für sicherheits-kritische
Informationssysteme in der zivilen Gefahrenabwehr am Beispiel der Feuerwehr.
Hamburg: tredition GmbH, 2019.'
mla: Schäfer, Christina. Entwicklung eines Vorgehens zum Safety Assessment für
sicherheits-kritische Informationssysteme in der zivilen Gefahrenabwehr am Beispiel
der Feuerwehr. tredition GmbH, 2019.
short: C. Schäfer, Entwicklung eines Vorgehens zum Safety Assessment für sicherheits-kritische
Informationssysteme in der zivilen Gefahrenabwehr am Beispiel der Feuerwehr, tredition
GmbH, Hamburg, 2019.
date_created: 2023-02-14T06:47:58Z
date_updated: 2023-02-14T06:48:04Z
department:
- _id: '144'
language:
- iso: ger
page: '233'
place: Hamburg
publication_identifier:
isbn:
- 978-3-7482-1563-9
publisher: tredition GmbH
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Entwicklung eines Vorgehens zum Safety Assessment für sicherheits-kritische
Informationssysteme in der zivilen Gefahrenabwehr am Beispiel der Feuerwehr
type: dissertation
user_id: '55833'
year: '2019'
...
---
_id: '21696'
abstract:
- lang: eng
text: Theimplementation of additive manufacturing as an industrial manufacturing
process poses extraordinary challenges to companies due to their far-reaching
differences to conventional processes. In addition to the major differences in
the production process, the pre and post process steps in particular also require
a rethinking for companies and their employees. To overcome these challenges and
specifically to assist SMEs in the integration of technologies five industrial
companies are researching together within research project "OptiAMix", funded
by the German Federal Ministry of Education and Research (BMBF) and coordinated
by the Paderborn University. This paper focuses on the development of an optimal
and standardized process chain and its implementation in a general integration
methodology. This enables the standardized integration of additivemanufacturing
in order to create a uniform understanding of the procedures and tasks within
the company for the industrial application of additive manufacturing at an early
stage as well as the full exploitation of its high potentials. Therefore, the
methodology also includes other technology-specific components such as strategic
component selection, decision support for "make or buy" and the implementation
of automated component marking.
author:
- first_name: J.
full_name: Büsching, J.
last_name: Büsching
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: A.
full_name: Kruse, A.
last_name: Kruse
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Büsching J, Lindemann C, Jahnke U, Kruse A, Koch R. Technology Integration
into Existing Companies. In: 29th Annual International Solid Freeform Fabrication
Symposium. Vol 29. ; 2018:14-31. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf'
apa: Büsching, J., Lindemann, C., Jahnke, U., Kruse, A., & Koch, R. (2018).
Technology Integration into Existing Companies. In 29th Annual International
Solid Freeform Fabrication Symposium (Vol. 29, pp. 14–31). http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf
bibtex: '@inproceedings{Büsching_Lindemann_Jahnke_Kruse_Koch_2018, title={Technology
Integration into Existing Companies}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Büsching,
J. and Lindemann, C. and Jahnke, U. and Kruse, A. and Koch, R.}, year={2018},
pages={14–31} }'
chicago: Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology
Integration into Existing Companies.” In 29th Annual International Solid Freeform
Fabrication Symposium, 29:14–31, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
ieee: J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, and R. Koch, “Technology Integration
into Existing Companies,” in 29th Annual International Solid Freeform Fabrication
Symposium, 2018, vol. 29, pp. 14–31.
mla: Büsching, J., et al. “Technology Integration into Existing Companies.” 29th
Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018,
pp. 14–31, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
short: 'J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, R. Koch, in: 29th Annual
International Solid Freeform Fabrication Symposium, 2018, pp. 14–31.'
date_created: 2021-04-21T07:38:06Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf
intvolume: ' 29'
language:
- iso: eng
page: 14-31
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Technology Integration into Existing Companies
type: conference
user_id: '55833'
volume: 29
year: '2018'
...
---
_id: '42768'
author:
- first_name: Christian-Friedrich Wilhelm
full_name: Lindemann, Christian-Friedrich Wilhelm
last_name: Lindemann
citation:
ama: Lindemann C-FW. Systematic Approach for Cost Efficient Design and Planning
with Additive Manufacturing.; 2018.
apa: Lindemann, C.-F. W. (2018). Systematic Approach for Cost Efficient Design
and Planning with Additive Manufacturing.
bibtex: '@book{Lindemann_2018, title={Systematic Approach for Cost Efficient Design
and Planning with Additive Manufacturing}, author={Lindemann, Christian-Friedrich
Wilhelm}, year={2018} }'
chicago: Lindemann, Christian-Friedrich Wilhelm. Systematic Approach for Cost
Efficient Design and Planning with Additive Manufacturing, 2018.
ieee: C.-F. W. Lindemann, Systematic Approach for Cost Efficient Design and Planning
with Additive Manufacturing. 2018.
mla: Lindemann, Christian-Friedrich Wilhelm. Systematic Approach for Cost Efficient
Design and Planning with Additive Manufacturing. 2018.
short: C.-F.W. Lindemann, Systematic Approach for Cost Efficient Design and Planning
with Additive Manufacturing, 2018.
date_created: 2023-03-06T12:03:48Z
date_updated: 2023-03-06T12:03:54Z
department:
- _id: '144'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-8440-5718-8
status: public
title: Systematic Approach for Cost Efficient Design and Planning with Additive Manufacturing
type: dissertation
user_id: '15324'
year: '2018'
...
---
_id: '21690'
abstract:
- lang: eng
text: Additive Manufacturing is a technology that offers a high potential forindustrial
companies.Nevertheless, companies lack experience with this new technology and
face the problem to identify processes where a successful and beneficial application
can be achieved. They have to be supported in this analysis with a decision support
tool which is capable to compare different manufacturing or repair approaches
in order to determine the optimal solution for the correspondent use case. This
is not always driven solely by costs but can also be critically affected by further
influencing factors. This is why the decision support takes into account also
time and quality alongside the costs. For a time-critical spare part supply, for
example within aerospace sector, they are substantial for taking a decision. The
presented decision support features a multi-attribute decision-making approach
for selecting the most appropriate process, either Additive Manufacturing, conventional
technologies or an external procurement.
author:
- first_name: G.
full_name: Deppe, G.
last_name: Deppe
- first_name: R.
full_name: Koch, R.
last_name: Koch
- first_name: M.
full_name: Kaesberg, M.
last_name: Kaesberg
citation:
ama: 'Deppe G, Koch R, Kaesberg M. Rational Decision-Making for the Beneficial Application
of Additive Manufacturing. In: 28th Annual International Solid Freeform Fabrication
Symposium. Vol 28. ; 2017:2597-2611. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf'
apa: Deppe, G., Koch, R., & Kaesberg, M. (2017). Rational Decision-Making for
the Beneficial Application of Additive Manufacturing. In 28th Annual International
Solid Freeform Fabrication Symposium (Vol. 28, pp. 2597–2611). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf
bibtex: '@inproceedings{Deppe_Koch_Kaesberg_2017, title={Rational Decision-Making
for the Beneficial Application of Additive Manufacturing}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Deppe,
G. and Koch, R. and Kaesberg, M.}, year={2017}, pages={2597–2611} }'
chicago: Deppe, G., R. Koch, and M. Kaesberg. “Rational Decision-Making for the
Beneficial Application of Additive Manufacturing.” In 28th Annual International
Solid Freeform Fabrication Symposium, 28:2597–2611, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf.
ieee: G. Deppe, R. Koch, and M. Kaesberg, “Rational Decision-Making for the Beneficial
Application of Additive Manufacturing,” in 28th Annual International Solid
Freeform Fabrication Symposium, 2017, vol. 28, pp. 2597–2611.
mla: Deppe, G., et al. “Rational Decision-Making for the Beneficial Application
of Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication
Symposium, vol. 28, 2017, pp. 2597–611, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf.
short: 'G. Deppe, R. Koch, M. Kaesberg, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 2597–2611.'
date_created: 2021-04-21T07:32:05Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf
intvolume: ' 28'
language:
- iso: eng
page: 2597-2611
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Rational Decision-Making for the Beneficial Application of Additive Manufacturing
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21691'
abstract:
- lang: eng
text: Designing parts for additive manufacturing (AM) offers a broad range of geometrical
and functional potentials. On the one hand the manufacturingtechnology offers
the possibility of manufacturing highly complex freeform shapes, often referred
to as bionic shapes. By use of these, perfect force fluxes without stress risings
due to imperfect notches are realizable, getting the most value of used material.
On the other hand these complex structures require a reliable geometry representation
in compatible CAD-files. Conventional CAD systems were developed to generate geometries
that are manufacturable with conventional machining. These are not capable of
representing the high complex designs for AM. Especially for geometries generated
by CAE like from topology optimization the conventional CAD systems fail to take
advantage of the combination of CAE and AM. This paper explains why there is a
lack of compatibility of well-known CAD systems with the potentials of AM. Therefore
the AM-side of the problem is described by showing some potentials of AM and the
need of high complex structures for this manufacturing technology. For the other
side of the problem conventional methodologies for geometry representation of
CAD systems are described and their limitations with regard to AM are worked out.
Finally a voxel based geometry representation is presented as a solution for computer
aided geometry generation of high complex AM–structures.
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: S.
full_name: Vogelsang, S.
last_name: Vogelsang
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Reiher T, Vogelsang S, Koch R. Computer integration for geometry generation
for product optimization with Additive Manufacturing. In: 28th Annual International
Solid Freeform Fabrication Symposium. Vol 28. ; 2017:903-921. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf'
apa: Reiher, T., Vogelsang, S., & Koch, R. (2017). Computer integration for
geometry generation for product optimization with Additive Manufacturing. In 28th
Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 903–921).
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
bibtex: '@inproceedings{Reiher_Vogelsang_Koch_2017, title={Computer integration
for geometry generation for product optimization with Additive Manufacturing},
volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Reiher,
T. and Vogelsang, S. and Koch, R.}, year={2017}, pages={903–921} }'
chicago: Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry
Generation for Product Optimization with Additive Manufacturing.” In 28th Annual
International Solid Freeform Fabrication Symposium, 28:903–21, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
ieee: T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation
for product optimization with Additive Manufacturing,” in 28th Annual International
Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
mla: Reiher, T., et al. “Computer Integration for Geometry Generation for Product
Optimization with Additive Manufacturing.” 28th Annual International Solid
Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
short: 'T. Reiher, S. Vogelsang, R. Koch, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 903–921.'
date_created: 2021-04-21T07:32:06Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
intvolume: ' 28'
language:
- iso: eng
page: 903-921
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Computer integration for geometry generation for product optimization with
Additive Manufacturing
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21692'
abstract:
- lang: eng
text: In many branches in the designengineerdepartment, product designs are just
variations of existing parts. To bring the additive manufacturing technology closer
to the Designer, it is necessary to show them which of their existing, conventionally
manufactured parts can be produced with this technology. Apartselection methodology
supportsdesigners in the decision whether a part is suitable for additive manufacturingor
not. Due to the potential of the technology, which was especially seen in the
aerospace industries, many criteria of the methodology were initially adapted
for this industry. Furthermore the methodology is based on a quantified weighting
system, which comes to a certain subjectivity. For future use, a development towards
a less subjective methodology should be accomplished. Through a more detailed
adaption for individual industries and a simplification of the input mode, the
objectivity of the criteria can be increased. Likewise, the input time can be
reduced by simplifying the questioning. A more efficient part selection will be
achieved by a better weighting system.In the BMBF project “OptiAMix” this methodology
is supposed to be further developed for highly different branches. By a better
weighting system, the part selection will be more efficient. Therefore,the willingness
for the use of the improved selection andfor the additive manufacturing technology
will be increased.
author:
- first_name: A.
full_name: Kruse, A.
last_name: Kruse
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Kruse A, Reiher T, Koch R. Integrating AM into existing companies - selection
of existing parts for increase of acceptance. In: 28th Annual International
Solid Freeform Fabrication Symposium. Vol 28. ; 2017:2575-2584. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf'
apa: Kruse, A., Reiher, T., & Koch, R. (2017). Integrating AM into existing
companies - selection of existing parts for increase of acceptance. In 28th
Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 2575–2584).
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf
bibtex: '@inproceedings{Kruse_Reiher_Koch_2017, title={Integrating AM into existing
companies - selection of existing parts for increase of acceptance}, volume={28},
DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Kruse,
A. and Reiher, T. and Koch, R.}, year={2017}, pages={2575–2584} }'
chicago: Kruse, A., T. Reiher, and R. Koch. “Integrating AM into Existing Companies
- Selection of Existing Parts for Increase of Acceptance.” In 28th Annual International
Solid Freeform Fabrication Symposium, 28:2575–84, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf.
ieee: A. Kruse, T. Reiher, and R. Koch, “Integrating AM into existing companies
- selection of existing parts for increase of acceptance,” in 28th Annual International
Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2575–2584.
mla: Kruse, A., et al. “Integrating AM into Existing Companies - Selection of Existing
Parts for Increase of Acceptance.” 28th Annual International Solid Freeform
Fabrication Symposium, vol. 28, 2017, pp. 2575–84, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf.
short: 'A. Kruse, T. Reiher, R. Koch, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 2575–2584.'
date_created: 2021-04-21T07:32:07Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf
intvolume: ' 28'
language:
- iso: eng
page: 2575-2584
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Integrating AM into existing companies - selection of existing parts for increase
of acceptance
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21693'
abstract:
- lang: eng
text: Although infringements of intellectual properties in terms of product piracy
are growing for years and threaten investments in research and development most
companies still rely on legal measures like property rights. A more preventive
effect to protect against counterfeits can be achieved using technical measures
complicating reverse engineering, improving traceability and assuring data protection.
Additive Manufacturing can contribute a lot to the effectivity and efficiency
of those technical measures but presently they are often unconsidered during product
development. To support decision makers and designers through all the steps of
a product development process an integrated systematic approach has been developed.
Protective measures using AM are allocated to specific process steps and responsible
persons in charge so that the result is a guideline for “design for protection”.
The main idea is to help developing piracy-robust products for that the return
of investment is not threatened by counterfeits and its economical impacts.
author:
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: R.
full_name: Koch, R.
last_name: Koch
- first_name: A. T.
full_name: Oppermann, A. T.
last_name: Oppermann
citation:
ama: 'Jahnke U, Koch R, Oppermann AT. Design for protection: Systematic approach
to prevent product piracy during product development using AM . In: 28th Annual
International Solid Freeform Fabrication Symposium. Vol 28. ; 2017:2481-2492.
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf'
apa: 'Jahnke, U., Koch, R., & Oppermann, A. T. (2017). Design for protection:
Systematic approach to prevent product piracy during product development using
AM . In 28th Annual International Solid Freeform Fabrication Symposium
(Vol. 28, pp. 2481–2492). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf'
bibtex: '@inproceedings{Jahnke_Koch_Oppermann_2017, title={Design for protection:
Systematic approach to prevent product piracy during product development using
AM }, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Jahnke,
U. and Koch, R. and Oppermann, A. T.}, year={2017}, pages={2481–2492} }'
chicago: 'Jahnke, U., R. Koch, and A. T. Oppermann. “Design for Protection: Systematic
Approach to Prevent Product Piracy during Product Development Using AM .” In 28th
Annual International Solid Freeform Fabrication Symposium, 28:2481–92, 2017.
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf.'
ieee: 'U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic
approach to prevent product piracy during product development using AM ,” in 28th
Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28,
pp. 2481–2492.'
mla: 'Jahnke, U., et al. “Design for Protection: Systematic Approach to Prevent
Product Piracy during Product Development Using AM .” 28th Annual International
Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2481–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf.'
short: 'U. Jahnke, R. Koch, A.T. Oppermann, in: 28th Annual International Solid
Freeform Fabrication Symposium, 2017, pp. 2481–2492.'
date_created: 2021-04-21T07:38:02Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf
intvolume: ' 28'
language:
- iso: eng
page: 2481-2492
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: 'Design for protection: Systematic approach to prevent product piracy during
product development using AM '
type: conference
user_id: '55833'
volume: 28
year: '2017'
...