@inproceedings{16065,
  author       = {{Kutz, P. and Wang, Z. and Ellouz, M. and Kordisch, T. and Tröster, Thomas}},
  location     = {{Bremen}},
  title        = {{{Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test}}},
  year         = {{2017}},
}

@phdthesis{16070,
  author       = {{Weiß Borkowski, Nathalie }},
  isbn         = {{978-3-8440-5013-4}},
  publisher    = {{Shaker Verlag Band 2017/22}},
  title        = {{{Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen}}},
  year         = {{2017}},
}

@inproceedings{16071,
  author       = {{Wang, Z. and Kutz, P. and Tröster, Thomas}},
  location     = {{Bielefeld}},
  title        = {{{Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen}}},
  year         = {{2017}},
}

@inproceedings{16072,
  author       = {{Weiß Borkowski, N. and Camberg, Alan Adam and Tröster, Thomas and Marten, Thorsten}},
  location     = {{Schloss Hohenkammer}},
  title        = {{{Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH}}},
  year         = {{2017}},
}

@inproceedings{16073,
  author       = {{Weiß Borkowski, N. and Marten, Thorsten and Tröster, Thomas and Schulz Beenken, A.}},
  isbn         = {{978-1-935117-66-7}},
  location     = {{Atlanta, USA}},
  title        = {{{Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates}}},
  year         = {{2017}},
}

@inproceedings{16074,
  author       = {{Ahlers, Dominik and Tröster, Thomas}},
  location     = {{Erfurt}},
  title        = {{{Materialkombinationen in der additive Fertigung}}},
  year         = {{2017}},
}

@inproceedings{16075,
  author       = {{Ahlers, Dominik and Tröster, Thomas}},
  location     = {{Nördlingen}},
  title        = {{{Aspekte der Produktentwicklung in der additiven Fertigung}}},
  year         = {{2017}},
}

@phdthesis{16068,
  author       = {{Marten, Thorsten}},
  isbn         = {{9783844055184}},
  publisher    = {{Shaker Verlag}},
  title        = {{{Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen}}},
  year         = {{2017}},
}

@phdthesis{37564,
  abstract     = {{Die Bedeutung von beanspruchungsangepassten Bauteilen aus metallischer Grundstruktur verstärkt mit einem Faserverbundkunststoff (FVK) steigt im automobilen Leichtbau stark an. Ein Verfahren zur Herstellung dieser hybriden Strukturen ist das Prepreg-Pressen. Bei diesem Verfahren wird der FVK direkt unter Temperatur und Druck auf die metallische Grundstruktur geklebt, wobei es aufgrund der deutlich unterschiedlichen Wärmeausdehnungskoeffizienten zu starken Eigenspannungen im Bauteil kommt. Diese prozessinduzierten Eigenspannungen wurden im Rahmen dieser Arbeit reduziert. Dazu wurde in einem ersten Schritt die Ausgangslage untersucht, indem die Eigenspannungen analytisch berechnet sowie experimentell untersucht wurden. Im zweiten Schritt wurde ein Konzept zur Reduzierung dieser erarbeitet. Hierbei spielt vor allem die Temperaturverteilung im Bauteil eine entscheidende Rolle, die analytisch, numerisch sowie praktisch bestimmt wurde. Im Anschluss wurden die Parameter dieses angepassten Verfahrens optimiert. In weiteren Optimierungsschritten wurde der Einfluss unterschiedlicher Materialien auf die induzierten Eigenspannungen sowie auf die mechanischen Eigenschaften des Gesamtverbundes untersucht. Die Eigenspannungen konnten mithilfe des optimierten Verfahrens deutlich reduziert werden. Abschließend wurden die Ergebnisse in einer Methodik zur Herstellung eigenspannungsoptimierter asymmetrischer Hybride zusammengefasst.}},
  author       = {{Frantz, Meike Maria}},
  isbn         = {{978-3-8440-5251-0}},
  pages        = {{144}},
  publisher    = {{Shaker Verlag}},
  title        = {{{Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen}}},
  volume       = {{2017,25}},
  year         = {{2017}},
}

@article{15961,
  author       = {{Weidenmann, Kay André and Pottmeyer, Florentin and Wang, Zheng and Tröster, Thomas and Meiners, Dieter and Zinn, Carolin and Schaper, Mirko and Gonzalez, Jonathan Serna}},
  issn         = {{2051-8218}},
  journal      = {{International Journal of Automotive Composites}},
  title        = {{{Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids}}},
  doi          = {{10.1504/ijautoc.2016.10005303}},
  year         = {{2017}},
}

@article{59977,
  abstract     = {{In the present paper, the crashworthiness of fabric-reinforced thermoplastic composites is experimentally and numerically investigated under axial impact loading. Main aim of this article is the qualification of large-scale producible structures for energy absorbing applications. For this reason, the considerable steps of thermo-forming as well as relevant process parameters are identified. This includes the development of an appropriate handling system for production on lab-scale. Formed three-dimensional profiles are tested under axial impact loading in a drop tower to initiate a continuous progressive crushing mode. Experimental results are analysed and evaluated regarding specific energy absorption (SEA). Numerical analysis by the explicit finite element code LS-Dyna is based on the orthotropic material model MAT54 and a four-layered shell model to implement crushing failure. Investigations show, that energy absorbing structures made of bidirectional organic sheets are suitable for automotive lightweight design.}},
  author       = {{Striewe, Jan Andre and Reuter, C. and Sauerland, K.-H. and Tröster, Thomas}},
  issn         = {{0263-8231}},
  journal      = {{Thin-Walled Structures}},
  pages        = {{501--508}},
  publisher    = {{Elsevier BV}},
  title        = {{{Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites}}},
  doi          = {{10.1016/j.tws.2017.11.011}},
  volume       = {{123}},
  year         = {{2017}},
}

@article{41530,
  author       = {{Hengsbach, Florian and Koppa, Peter and Duschik, Kristina and Holzweissig, Martin Joachim and Burns, Madison and Nellesen, Jens and Tillmann, Wolfgang and Tröster, Thomas and Hoyer, Kay-Peter and Schaper, Mirko}},
  issn         = {{0264-1275}},
  journal      = {{Materials & Design}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, General Materials Science}},
  pages        = {{136--142}},
  publisher    = {{Elsevier BV}},
  title        = {{{Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties}}},
  doi          = {{10.1016/j.matdes.2017.07.046}},
  volume       = {{133}},
  year         = {{2017}},
}

@inproceedings{16066,
  author       = {{Ahlers, Dominik and Koppa, Peter and Hengsbach, Florian and Gloetter, P. and Altmann, A. and Schaper, Mirko and Tröster, Thomas}},
  booktitle    = {{Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference}},
  location     = {{Austin, Texas, USA}},
  title        = {{{Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing}}},
  year         = {{2017}},
}

@article{24108,
  author       = {{Hengsbach, Florian and Koppa, Peter and Duschik, Kristina and Holzweissig, Martin Joachim and Burns, Madison and Nellesen, Jens and Tillmann, Wolfgang and Tröster, Thomas and Hoyer, Kay-Peter and Schaper, Mirko}},
  issn         = {{0264-1275}},
  journal      = {{Materials & Design}},
  pages        = {{136--142}},
  title        = {{{Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties}}},
  doi          = {{10.1016/j.matdes.2017.07.046}},
  year         = {{2017}},
}

@inproceedings{15978,
  author       = {{Tasdemirci, Alper and Tüzgel, Firat and Güzel, Erkan and Akbulut Irmak, Emine Fulya and Güden, Mustafa}},
  location     = {{Exeter, London}},
  publisher    = {{The British Society for Strain Measurement}},
  title        = {{{The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments}}},
  year         = {{2016}},
}

@article{16139,
  author       = {{Schweizer, Swetlana and Tröster, Thomas}},
  journal      = {{Carbon Composites Magazin}},
  number       = {{2}},
  pages        = {{23}},
  title        = {{{Recyclingkonzepte für hybride Strukturen}}},
  year         = {{2016}},
}

@article{16142,
  abstract     = {{<jats:p>The increasing use of hybrid materials requires efficient manufacturing processes. With the concept of the intrinsic hybrids the shaping or forming of the part is combined with the hybridization in the same process step and thereby the same tool. Hence new tooling concepts, which realise the process requirements, are necessary. This paper describes tooling concepts and design methods for the manufacturing of intrinsic hybrid parts. Different solutions for rotational and planar parts with thermosetting or thermoplastic matrix material are presented. Additionally the integration of inserts in such tools is discussed. Finally the main challenges for the design of tools for intrinsic hybrids will be presented.</jats:p>}},
  author       = {{Wang, Zheng and Riemer, Matthias and Koch, Simon Frederik and Barfuss, Daniel and Grützner, Raik and Augenthaler, Florian and Schwennen, Jan}},
  issn         = {{1662-8985}},
  journal      = {{Advanced Materials Research}},
  pages        = {{247--254}},
  title        = {{{Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies}}},
  doi          = {{10.4028/www.scientific.net/amr.1140.247}},
  year         = {{2016}},
}

@article{16144,
  abstract     = {{<jats:p>This publication describes new process chain approaches for the manufacturing of intrinsic hybrid composites for lightweight structures. The introduced process chains show a variety of different part and sample types, like insert technology for fastening of hollow hybrid shafts and profiles. Another field of research are hybrid laminates with different layers of carbon fiber reinforced plastics stacked with aluminum or steel sheets. The derived process chains base on automated fiber placement, resin transfer molding, deep drawing, rotational molding and integral tube blow molding.</jats:p>}},
  author       = {{Koch, Simon Frederik and Barfuss, Daniel and Bobbert, Mathias and Groß, Lukas and Grützner, Raik and Riemer, Matthias and Stefaniak, Daniel and Wang, Zheng}},
  issn         = {{1662-8985}},
  journal      = {{Advanced Materials Research}},
  pages        = {{239--246}},
  title        = {{{Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches}}},
  doi          = {{10.4028/www.scientific.net/amr.1140.239}},
  year         = {{2016}},
}

@phdthesis{16145,
  author       = {{Reuter, C.}},
  isbn         = {{978-3-8440-4797-4}},
  title        = {{{Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen}}},
  year         = {{2016}},
}

@article{16146,
  author       = {{Grienitz, Volker and Tröster, Thomas and Meiners, Stefan}},
  issn         = {{0001-2785}},
  journal      = {{ATZ - Automobiltechnische Zeitschrift}},
  pages        = {{36--41}},
  title        = {{{Technikevaluation für die generative Fertigung eines Serien-Radträgers}}},
  doi          = {{10.1007/s35148-016-0090-5}},
  year         = {{2016}},
}