---
_id: '59978'
abstract:
- lang: eng
text: In latest body-in-white (BIW) concepts, engineers take into account a wider
range of different materials to pursue a multi-material design approach. However,
the lightweight potential of common materials like steel, aluminum or even fiber-reinforcement
plastics (FRP) is limited. In keeping with the motto “the best material for the
best application”, a new approach for a top-down material design is introduced.
With the aim to develop an application tailored material, the multi-material concept
is adapted for the thickness dimension of the component. Within this contribution
a new optimization- based design methodology is applied on a stiffness relevant
car body part. Starting with benchmark simulations of a reference BIW structure,
a critical car body component is determined by an internal energy based method
and a subsequent sensitivity analysis. The identified demonstrator component is
later subdivided into multiple layers and submitted to a first optimization loop
in which the developed methodology varies the material parameters for each single
layer. Once an optimum for the through-thickness properties of the part is found,
further optimization loops with concrete material pendants and manufacturing restrictions
are carried out. The result is a hybrid laminate part consisting of steel and
FRP plies. To achieve a further improvement in body characteristics and lightweight,
the investigated part is redesigned by the aim of topology optimization. Finally,
the tailored hybrid stacks are validated in BIW simulations and compared with
the reference. The optimization-based approach allows a weight reduction up to
25 % while maintaining or even improving the BIW properties.
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Ina
full_name: Stratmann, Ina
last_name: Stratmann
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Camberg AA, Stratmann I, Tröster T. TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED
APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.
In: Zukunftstechnologien Für Den Multifunktionalen Leichtbau. Springer
Berlin Heidelberg; 2019. doi:10.1007/978-3-662-58206-0_12'
apa: Camberg, A. A., Stratmann, I., & Tröster, T. (2019). TAILORED STACKED HYBRIDS
– AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN
LIGHTWEIGHT CAR BODY STRUCTURES. In Zukunftstechnologien für den multifunktionalen
Leichtbau. Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-58206-0_12
bibtex: '@inbook{Camberg_Stratmann_Tröster_2019, place={Berlin, Heidelberg}, title={TAILORED
STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER
IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES}, DOI={10.1007/978-3-662-58206-0_12},
booktitle={Zukunftstechnologien für den multifunktionalen Leichtbau}, publisher={Springer
Berlin Heidelberg}, author={Camberg, Alan Adam and Stratmann, Ina and Tröster,
Thomas}, year={2019} }'
chicago: 'Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED
HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT
IN LIGHTWEIGHT CAR BODY STRUCTURES.” In Zukunftstechnologien Für Den Multifunktionalen
Leichtbau. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. https://doi.org/10.1007/978-3-662-58206-0_12.'
ieee: 'A. A. Camberg, I. Stratmann, and T. Tröster, “TAILORED STACKED HYBRIDS –
AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT
CAR BODY STRUCTURES,” in Zukunftstechnologien für den multifunktionalen Leichtbau,
Berlin, Heidelberg: Springer Berlin Heidelberg, 2019.'
mla: Camberg, Alan Adam, et al. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED
APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.”
Zukunftstechnologien Für Den Multifunktionalen Leichtbau, Springer Berlin
Heidelberg, 2019, doi:10.1007/978-3-662-58206-0_12.
short: 'A.A. Camberg, I. Stratmann, T. Tröster, in: Zukunftstechnologien Für Den
Multifunktionalen Leichtbau, Springer Berlin Heidelberg, Berlin, Heidelberg, 2019.'
date_created: 2025-05-19T06:54:59Z
date_updated: 2025-05-19T06:56:19Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
doi: 10.1007/978-3-662-58206-0_12
language:
- iso: eng
place: Berlin, Heidelberg
publication: Zukunftstechnologien für den multifunktionalen Leichtbau
publication_identifier:
isbn:
- '9783662582053'
- '9783662582060'
issn:
- 2524-4787
- 2524-4795
publication_status: published
publisher: Springer Berlin Heidelberg
quality_controlled: '1'
status: public
title: TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN
FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES
type: book_chapter
user_id: '15952'
year: '2019'
...
---
_id: '13436'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Ina
full_name: Stratmann, Ina
last_name: Stratmann
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Camberg AA, Stratmann I, Tröster T. TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED
APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.
In: Technologies for Economical and Functional Lightweight Design. ; 2019.
doi:10.1007/978-3-662-58206-0_12'
apa: Camberg, A. A., Stratmann, I., & Tröster, T. (2019). TAILORED STACKED HYBRIDS
– AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN
LIGHTWEIGHT CAR BODY STRUCTURES. In Technologies for economical and functional
lightweight design. https://doi.org/10.1007/978-3-662-58206-0_12
bibtex: '@inbook{Camberg_Stratmann_Tröster_2019, place={Berlin, Heidelberg}, title={TAILORED
STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER
IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES}, DOI={10.1007/978-3-662-58206-0_12},
booktitle={Technologies for economical and functional lightweight design}, author={Camberg,
Alan Adam and Stratmann, Ina and Tröster, Thomas}, year={2019} }'
chicago: Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED
HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT
IN LIGHTWEIGHT CAR BODY STRUCTURES.” In Technologies for Economical and Functional
Lightweight Design. Berlin, Heidelberg, 2019. https://doi.org/10.1007/978-3-662-58206-0_12.
ieee: A. A. Camberg, I. Stratmann, and T. Tröster, “TAILORED STACKED HYBRIDS – AN
OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT
CAR BODY STRUCTURES,” in Technologies for economical and functional lightweight
design, Berlin, Heidelberg, 2019.
mla: Camberg, Alan Adam, et al. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED
APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.”
Technologies for Economical and Functional Lightweight Design, 2019, doi:10.1007/978-3-662-58206-0_12.
short: 'A.A. Camberg, I. Stratmann, T. Tröster, in: Technologies for Economical
and Functional Lightweight Design, Berlin, Heidelberg, 2019.'
date_created: 2019-09-22T17:33:23Z
date_updated: 2025-06-06T08:43:04Z
department:
- _id: '149'
- _id: '9'
- _id: '321'
doi: 10.1007/978-3-662-58206-0_12
language:
- iso: eng
place: Berlin, Heidelberg
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Technologies for economical and functional lightweight design
publication_identifier:
isbn:
- '9783662582053'
- '9783662582060'
issn:
- 2524-4787
- 2524-4795
publication_status: published
status: public
title: TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN
FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES
type: book_chapter
user_id: '15952'
year: '2019'
...
---
_id: '16030'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: S.
full_name: Bienia, S.
last_name: Bienia
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: K.
full_name: Dröder, K.
last_name: Dröder
citation:
ama: 'Triebus M, Bienia S, Marten T, Tröster T, Dröder K. Press Hardening Integrated
Structuring for Hybrid Components. In: Oldenburg M, Hardell J, Casellas D, eds.
Proceedings of 7th International Conference Hot Sheet Metal Forming of High-Performance
Steel. Verlag Wissenschaftliche Scripten; 2019.'
apa: Triebus, M., Bienia, S., Marten, T., Tröster, T., & Dröder, K. (2019).
Press Hardening Integrated Structuring for Hybrid Components. In M. Oldenburg,
J. Hardell, & D. Casellas (Eds.), Proceedings of 7th International Conference
Hot Sheet Metal Forming of High-Performance Steel. Verlag Wissenschaftliche
Scripten.
bibtex: '@inproceedings{Triebus_Bienia_Marten_Tröster_Dröder_2019, title={Press
Hardening Integrated Structuring for Hybrid Components}, booktitle={Proceedings
of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel},
publisher={Verlag Wissenschaftliche Scripten}, author={Triebus, Marcel and Bienia,
S. and Marten, Thorsten and Tröster, Thomas and Dröder, K.}, editor={Oldenburg,
Mats and Hardell, Jens and Casellas, Daniel}, year={2019} }'
chicago: Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder.
“Press Hardening Integrated Structuring for Hybrid Components.” In Proceedings
of 7th International Conference Hot Sheet Metal Forming of High-Performance Steel,
edited by Mats Oldenburg, Jens Hardell, and Daniel Casellas. Verlag Wissenschaftliche
Scripten, 2019.
ieee: M. Triebus, S. Bienia, T. Marten, T. Tröster, and K. Dröder, “Press Hardening
Integrated Structuring for Hybrid Components,” in Proceedings of 7th International
Conference Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden,
2019.
mla: Triebus, Marcel, et al. “Press Hardening Integrated Structuring for Hybrid
Components.” Proceedings of 7th International Conference Hot Sheet Metal Forming
of High-Performance Steel, edited by Mats Oldenburg et al., Verlag Wissenschaftliche
Scripten, 2019.
short: 'M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: M. Oldenburg,
J. Hardell, D. Casellas (Eds.), Proceedings of 7th International Conference Hot
Sheet Metal Forming of High-Performance Steel, Verlag Wissenschaftliche Scripten,
2019.'
conference:
end_date: 2019-06-05
location: Lulea, Sweden
name: 7th International Conference on Hot Sheet Metal Forming of High-Performance
Steel
start_date: 2019-06-02
date_created: 2020-02-24T14:41:21Z
date_updated: 2026-02-16T15:24:39Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
editor:
- first_name: Mats
full_name: Oldenburg, Mats
last_name: Oldenburg
- first_name: Jens
full_name: Hardell, Jens
last_name: Hardell
- first_name: Daniel
full_name: Casellas, Daniel
last_name: Casellas
language:
- iso: eng
publication: Proceedings of 7th International Conference Hot Sheet Metal Forming of
High-Performance Steel
publication_identifier:
isbn:
- 978-3-95735-104-3
publication_status: published
publisher: Verlag Wissenschaftliche Scripten
status: public
title: Press Hardening Integrated Structuring for Hybrid Components
type: conference
user_id: '338'
year: '2019'
...
---
_id: '64186'
author:
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Rainer
full_name: Salomon, Rainer
last_name: Salomon
citation:
ama: Marten T, Tröster T, Salomon R. P920 - Einsatz neuartiger Stähle und Generierung
gradierter Leichtbaustrukturen im Presshärteprozess. Verlag und Vertriebsgesellschaft
mbH; 2019.
apa: Marten, T., Tröster, T., & Salomon, R. (2019). P920 - Einsatz neuartiger
Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess.
Verlag und Vertriebsgesellschaft mbH.
bibtex: '@book{Marten_Tröster_Salomon_2019, place={Düsseldorf}, series={Forschung
für die Praxis}, title={P920 - Einsatz neuartiger Stähle und Generierung gradierter
Leichtbaustrukturen im Presshärteprozess}, publisher={Verlag und Vertriebsgesellschaft
mbH}, author={Marten, Thorsten and Tröster, Thomas and Salomon, Rainer}, year={2019},
collection={Forschung für die Praxis} }'
chicago: 'Marten, Thorsten, Thomas Tröster, and Rainer Salomon. P920 - Einsatz
neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess.
Forschung für die Praxis. Düsseldorf: Verlag und Vertriebsgesellschaft mbH, 2019.'
ieee: 'T. Marten, T. Tröster, and R. Salomon, P920 - Einsatz neuartiger Stähle
und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf:
Verlag und Vertriebsgesellschaft mbH, 2019.'
mla: Marten, Thorsten, et al. P920 - Einsatz neuartiger Stähle und Generierung
gradierter Leichtbaustrukturen im Presshärteprozess. Verlag und Vertriebsgesellschaft
mbH, 2019.
short: T. Marten, T. Tröster, R. Salomon, P920 - Einsatz neuartiger Stähle und Generierung
gradierter Leichtbaustrukturen im Presshärteprozess, Verlag und Vertriebsgesellschaft
mbH, Düsseldorf, 2019.
date_created: 2026-02-17T09:38:26Z
date_updated: 2026-02-17T09:50:27Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
place: Düsseldorf
publication_identifier:
isbn:
- 978-3-946885-33-7
publication_status: published
publisher: Verlag und Vertriebsgesellschaft mbH
report_number: P920
series_title: Forschung für die Praxis
status: public
title: P920 - Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen
im Presshärteprozess
type: report
user_id: '338'
year: '2019'
...
---
_id: '19868'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Nikolay
full_name: Sotirov, Nikolay
last_name: Sotirov
- first_name: Jörn
full_name: Tölle, Jörn
last_name: Tölle
- first_name: Friedrich
full_name: Bohner, Friedrich
last_name: Bohner
citation:
ama: 'Camberg AA, Tröster T, Sotirov N, Tölle J, Bohner F. Investigation of ductility
and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions.
In: Materials Science and Engineering (MSE) Congress 2018. Darmstadt; 2018.'
apa: Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., & Bohner, F. (2018).
Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal
forming conditions. In Materials Science and Engineering (MSE) Congress 2018.
Darmstadt.
bibtex: '@inproceedings{Camberg_Tröster_Sotirov_Tölle_Bohner_2018, place={Darmstadt},
title={Investigation of ductility and damage characteristics of EN AW-5182 H18
at non-isothermal forming conditions}, booktitle={Materials Science and Engineering
(MSE) Congress 2018}, author={Camberg, Alan Adam and Tröster, Thomas and Sotirov,
Nikolay and Tölle, Jörn and Bohner, Friedrich}, year={2018} }'
chicago: Camberg, Alan Adam, Thomas Tröster, Nikolay Sotirov, Jörn Tölle, and Friedrich
Bohner. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18
at Non-Isothermal Forming Conditions.” In Materials Science and Engineering
(MSE) Congress 2018. Darmstadt, 2018.
ieee: A. A. Camberg, T. Tröster, N. Sotirov, J. Tölle, and F. Bohner, “Investigation
of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming
conditions,” in Materials Science and Engineering (MSE) Congress 2018,
Darmstadt, 2018.
mla: Camberg, Alan Adam, et al. “Investigation of Ductility and Damage Characteristics
of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” Materials Science
and Engineering (MSE) Congress 2018, 2018.
short: 'A.A. Camberg, T. Tröster, N. Sotirov, J. Tölle, F. Bohner, in: Materials
Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.'
conference:
end_date: 2018-09-27
location: Darmstadt
name: Materials Science and Engineering (MSE) Congress 2018
start_date: 2018-09-25
date_created: 2020-10-04T19:23:56Z
date_updated: 2022-01-06T06:54:14Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
place: Darmstadt
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Materials Science and Engineering (MSE) Congress 2018
publication_status: published
status: public
title: Investigation of ductility and damage characteristics of EN AW-5182 H18 at
non-isothermal forming conditions
type: conference_abstract
user_id: '60544'
year: '2018'
...
---
_id: '6594'
author:
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Henning
full_name: Zeipert, Henning
id: '32580'
last_name: Zeipert
- first_name: Peter
full_name: Koppa, Peter
last_name: Koppa
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additiv Gefertigte, Akustische
Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen
von Ultraschall”, Drübeck; 2018.
apa: Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2018). Additiv
gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop
“Messtechnische Anwendungen von Ultraschall”, Drübeck.
bibtex: '@book{Claes_Zeipert_Koppa_Tröster_Henning_2018, place={Workshop “Messtechnische
Anwendungen von Ultraschall”, Drübeck}, title={Additiv gefertigte, akustische
Diffusor-Strukturen für Ultraschallanwendungen}, author={Claes, Leander and Zeipert,
Henning and Koppa, Peter and Tröster, Thomas and Henning, Bernd}, year={2018}
}'
chicago: Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd
Henning. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen.
Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
ieee: L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, Additiv gefertigte,
akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische
Anwendungen von Ultraschall”, Drübeck, 2018.
mla: Claes, Leander, et al. Additiv Gefertigte, Akustische Diffusor-Strukturen
Für Ultraschallanwendungen. 2018.
short: L. Claes, H. Zeipert, P. Koppa, T. Tröster, B. Henning, Additiv Gefertigte,
Akustische Diffusor-Strukturen Für Ultraschallanwendungen, Workshop “Messtechnische
Anwendungen von Ultraschall”, Drübeck, 2018.
date_created: 2019-01-09T16:12:23Z
date_updated: 2022-01-06T07:03:13Z
department:
- _id: '49'
- _id: '149'
- _id: '219'
language:
- iso: eng
place: Workshop "Messtechnische Anwendungen von Ultraschall", Drübeck
status: public
title: Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen
type: misc
user_id: '11829'
year: '2018'
...
---
_id: '15876'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Katja
full_name: Engelkemeier, Katja
last_name: Engelkemeier
- first_name: Jan
full_name: Dietrich, Jan
last_name: Dietrich
- first_name: Thomas
full_name: Heggemann, Thomas
last_name: Heggemann
citation:
ama: Camberg AA, Engelkemeier K, Dietrich J, Heggemann T. Top-down design of tailored
fiber-metal laminates. Lightweight Design worldwide. 2018;11(2):24-29.
doi:10.1007/s41777-018-0004-1
apa: Camberg, A. A., Engelkemeier, K., Dietrich, J., & Heggemann, T. (2018).
Top-down design of tailored fiber-metal laminates. Lightweight Design Worldwide,
11(2), 24–29. https://doi.org/10.1007/s41777-018-0004-1
bibtex: '@article{Camberg_Engelkemeier_Dietrich_Heggemann_2018, title={Top-down
design of tailored fiber-metal laminates}, volume={11}, DOI={10.1007/s41777-018-0004-1},
number={2}, journal={Lightweight Design worldwide}, publisher={Springer Vieweg},
author={Camberg, Alan Adam and Engelkemeier, Katja and Dietrich, Jan and Heggemann,
Thomas}, year={2018}, pages={24–29} }'
chicago: 'Camberg, Alan Adam, Katja Engelkemeier, Jan Dietrich, and Thomas Heggemann.
“Top-down Design of Tailored Fiber-Metal Laminates.” Lightweight Design Worldwide
11, no. 2 (2018): 24–29. https://doi.org/10.1007/s41777-018-0004-1.'
ieee: A. A. Camberg, K. Engelkemeier, J. Dietrich, and T. Heggemann, “Top-down design
of tailored fiber-metal laminates,” Lightweight Design worldwide, vol.
11, no. 2, pp. 24–29, 2018.
mla: Camberg, Alan Adam, et al. “Top-down Design of Tailored Fiber-Metal Laminates.”
Lightweight Design Worldwide, vol. 11, no. 2, Springer Vieweg, 2018, pp.
24–29, doi:10.1007/s41777-018-0004-1.
short: A.A. Camberg, K. Engelkemeier, J. Dietrich, T. Heggemann, Lightweight Design
Worldwide 11 (2018) 24–29.
date_created: 2020-02-11T10:25:31Z
date_updated: 2022-01-06T06:52:39Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1007/s41777-018-0004-1
intvolume: ' 11'
issue: '2'
language:
- iso: eng
page: 24-29
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Lightweight Design worldwide
publication_identifier:
issn:
- 2510-2877
publication_status: published
publisher: Springer Vieweg
status: public
title: Top-down design of tailored fiber-metal laminates
type: journal_article
user_id: '60544'
volume: 11
year: '2018'
...
---
_id: '15977'
author:
- first_name: Alper
full_name: Tasdemirci, Alper
last_name: Tasdemirci
- first_name: Emine Fulya
full_name: Akbulut Irmak, Emine Fulya
id: '72008'
last_name: Akbulut Irmak
orcid: 0000-0002-1338-810X
- first_name: Erkan
full_name: Guzel, Erkan
last_name: Guzel
- first_name: Firat
full_name: Tuzgel, Firat
last_name: Tuzgel
- first_name: Atacan
full_name: Yucesoy, Atacan
last_name: Yucesoy
- first_name: Selim
full_name: Sahin, Selim
last_name: Sahin
- first_name: Mustafa
full_name: Guden, Mustafa
last_name: Guden
citation:
ama: 'Tasdemirci A, Akbulut Irmak EF, Guzel E, et al. Crushing behavior and energy
absorption performance of a bio-inspired metallic structure: Experimental and
numerical study. Thin-Walled Structures. 2018:547-555. doi:10.1016/j.tws.2018.07.051'
apa: 'Tasdemirci, A., Akbulut Irmak, E. F., Guzel, E., Tuzgel, F., Yucesoy, A.,
Sahin, S., & Guden, M. (2018). Crushing behavior and energy absorption performance
of a bio-inspired metallic structure: Experimental and numerical study. Thin-Walled
Structures, 547–555. https://doi.org/10.1016/j.tws.2018.07.051'
bibtex: '@article{Tasdemirci_Akbulut Irmak_Guzel_Tuzgel_Yucesoy_Sahin_Guden_2018,
title={Crushing behavior and energy absorption performance of a bio-inspired metallic
structure: Experimental and numerical study}, DOI={10.1016/j.tws.2018.07.051},
journal={Thin-Walled Structures}, author={Tasdemirci, Alper and Akbulut Irmak,
Emine Fulya and Guzel, Erkan and Tuzgel, Firat and Yucesoy, Atacan and Sahin,
Selim and Guden, Mustafa}, year={2018}, pages={547–555} }'
chicago: 'Tasdemirci, Alper, Emine Fulya Akbulut Irmak, Erkan Guzel, Firat Tuzgel,
Atacan Yucesoy, Selim Sahin, and Mustafa Guden. “Crushing Behavior and Energy
Absorption Performance of a Bio-Inspired Metallic Structure: Experimental and
Numerical Study.” Thin-Walled Structures, 2018, 547–55. https://doi.org/10.1016/j.tws.2018.07.051.'
ieee: 'A. Tasdemirci et al., “Crushing behavior and energy absorption performance
of a bio-inspired metallic structure: Experimental and numerical study,” Thin-Walled
Structures, pp. 547–555, 2018.'
mla: 'Tasdemirci, Alper, et al. “Crushing Behavior and Energy Absorption Performance
of a Bio-Inspired Metallic Structure: Experimental and Numerical Study.” Thin-Walled
Structures, 2018, pp. 547–55, doi:10.1016/j.tws.2018.07.051.'
short: A. Tasdemirci, E.F. Akbulut Irmak, E. Guzel, F. Tuzgel, A. Yucesoy, S. Sahin,
M. Guden, Thin-Walled Structures (2018) 547–555.
date_created: 2020-02-21T15:34:12Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2018.07.051
extern: '1'
language:
- iso: eng
page: 547-555
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: 'Crushing behavior and energy absorption performance of a bio-inspired metallic
structure: Experimental and numerical study'
type: journal_article
user_id: '72008'
year: '2018'
...
---
_id: '16034'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Camberg AA, Tröster T. Optimization-based material design of tailored stacked
hybrids for further improvement in lightweight car body structures. In: HYBRID
- MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft
für Materialkunde e.V.; 2018.'
apa: 'Camberg, A. A., & Tröster, T. (2018). Optimization-based material design
of tailored stacked hybrids for further improvement in lightweight car body structures.
In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. Bremen: DGM -
Deutsche Gesellschaft für Materialkunde e.V.'
bibtex: '@inproceedings{Camberg_Tröster_2018, title={Optimization-based material
design of tailored stacked hybrids for further improvement in lightweight car
body structures}, booktitle={HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS},
publisher={DGM - Deutsche Gesellschaft für Materialkunde e.V.}, author={Camberg,
Alan Adam and Tröster, Thomas}, year={2018} }'
chicago: Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design
of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.”
In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche
Gesellschaft für Materialkunde e.V., 2018.
ieee: A. A. Camberg and T. Tröster, “Optimization-based material design of tailored
stacked hybrids for further improvement in lightweight car body structures,” in
HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, Bremen, 2018.
mla: Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design
of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.”
HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft
für Materialkunde e.V., 2018.
short: 'A.A. Camberg, T. Tröster, in: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS,
DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.'
conference:
end_date: 2018-04-19
location: Bremen
name: 3rd International Conference on Hybrid Materials and Structures
start_date: 2018-04-18
date_created: 2020-02-24T14:59:47Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS
publication_identifier:
isbn:
- 978-3-88355-417-4
publication_status: published
publisher: DGM - Deutsche Gesellschaft für Materialkunde e.V.
status: public
title: Optimization-based material design of tailored stacked hybrids for further
improvement in lightweight car body structures
type: conference
user_id: '60544'
year: '2018'
...
---
_id: '16039'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Entwicklung einer Prozessroute für die Luftfahrtindustrie
mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. In: ; 2018.'
apa: Ahlers, D., & Tröster, T. (2018). Entwicklung einer Prozessroute für die
Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V.
Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.
bibtex: '@inproceedings{Ahlers_Tröster_2018, title={Entwicklung einer Prozessroute
für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess
von Ti6Al4V}, author={Ahlers, Dominik and Tröster, Thomas}, year={2018} }'
chicago: Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für
die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von
Ti6Al4V,” 2018.
ieee: D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie
mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at
the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.
mla: Ahlers, Dominik, and Thomas Tröster. Entwicklung einer Prozessroute für
die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von
Ti6Al4V. 2018.
short: 'D. Ahlers, T. Tröster, in: 2018.'
conference:
location: Erfurt
name: Rapid.Tech 2018 – Fachforum Luftfahrt
start_date: 2018-06-07
date_created: 2020-02-24T15:57:52Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate
im Laserstrahlschmelzprozess von Ti6Al4V
type: conference
user_id: '11207'
year: '2018'
...
---
_id: '16040'
author:
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wang Z, Tröster T. Influences of interface on the adhesion and corrosion properties
of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer
moulding. In: ; 2018.'
apa: Wang, Z., & Tröster, T. (2018). Influences of interface on the adhesion
and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum
assisted resin transfer moulding. Presented at the 21th International Conference
on Composite Structures (ICCS21), Bologna, Italy.
bibtex: '@inproceedings{Wang_Tröster_2018, title={Influences of interface on the
adhesion and corrosion properties of steel-CFRP hybrid structures manufactured
by vacuum assisted resin transfer moulding}, author={Wang, Z. and Tröster, Thomas},
year={2018} }'
chicago: Wang, Z., and Thomas Tröster. “Influences of Interface on the Adhesion
and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum
Assisted Resin Transfer Moulding,” 2018.
ieee: Z. Wang and T. Tröster, “Influences of interface on the adhesion and corrosion
properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin
transfer moulding,” presented at the 21th International Conference on Composite
Structures (ICCS21), Bologna, Italy, 2018.
mla: Wang, Z., and Thomas Tröster. Influences of Interface on the Adhesion and
Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted
Resin Transfer Moulding. 2018.
short: 'Z. Wang, T. Tröster, in: 2018.'
conference:
end_date: 2018-09-07
location: Bologna, Italy
name: 21th International Conference on Composite Structures (ICCS21)
start_date: 2018-09-04
date_created: 2020-02-24T15:59:53Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influences of interface on the adhesion and corrosion properties of steel-CFRP
hybrid structures manufactured by vacuum assisted resin transfer moulding
type: conference
user_id: '72008'
year: '2018'
...
---
_id: '16042'
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: S.
full_name: Bienia, S.
last_name: Bienia
- first_name: K.
full_name: Dröder, K.
last_name: Dröder
citation:
ama: 'Triebus M, Tröster T, Camberg AA, Bienia S, Dröder K. Modelling the Interface
of Hybrid Metal-FRP Components Joint by Form Closures. In: 15. Deutsches LS-Dyna
Forum. ; 2018.'
apa: Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., & Dröder, K. (2018).
Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.
In 15. Deutsches LS-Dyna Forum. Bamberg.
bibtex: '@inproceedings{Triebus_Tröster_Camberg_Bienia_Dröder_2018, title={Modelling
the Interface of Hybrid Metal-FRP Components Joint by Form Closures}, booktitle={15.
Deutsches LS-Dyna Forum}, author={Triebus, Marcel and Tröster, Thomas and Camberg,
Alan Adam and Bienia, S. and Dröder, K.}, year={2018} }'
chicago: Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder.
“Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.”
In 15. Deutsches LS-Dyna Forum, 2018.
ieee: M. Triebus, T. Tröster, A. A. Camberg, S. Bienia, and K. Dröder, “Modelling
the Interface of Hybrid Metal-FRP Components Joint by Form Closures,” in 15.
Deutsches LS-Dyna Forum, Bamberg, 2018.
mla: Triebus, Marcel, et al. “Modelling the Interface of Hybrid Metal-FRP Components
Joint by Form Closures.” 15. Deutsches LS-Dyna Forum, 2018.
short: 'M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches
LS-Dyna Forum, 2018.'
conference:
end_date: 2018-10-17
location: Bamberg
name: 15. Deutsches LS-Dyna Forum
start_date: 2018-10-15
date_created: 2020-02-24T16:03:13Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.dynamore.de/de/download/papers/2018-ls-dyna-forum/papers-2018/montag-15.-oktober-2018/crash-lightweight-composites/modelling-the-interface-of-hybrid-metal-frp-components-joint-by-form-closures
oa: '1'
popular_science: '1'
publication: 15. Deutsches LS-Dyna Forum
status: public
title: Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures
type: conference
user_id: '60544'
year: '2018'
...
---
_id: '16043'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: A.
full_name: Schneidt , A.
last_name: 'Schneidt '
- first_name: N.
full_name: Sotirov , N.
last_name: 'Sotirov '
- first_name: J.
full_name: Tölle, J.
last_name: Tölle
citation:
ama: 'Camberg AA, Tröster T, Schneidt A, Sotirov N, Tölle J. The influence of
damage accumulation on failure prediction: a comparative assessment of *MAT_224
and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming.
In: 15. Deutsches LS-Dyna Forum. ; 2018.'
apa: 'Camberg, A. A., Tröster, T., Schneidt , A., Sotirov , N., & Tölle, J.
(2018). The influence of damage accumulation on failure prediction: a comparative
assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal
sheet metal forming. In 15. Deutsches LS-Dyna Forum. Bamberg.'
bibtex: '@inproceedings{Camberg_Tröster_Schneidt _Sotirov _Tölle_2018, title={The
influence of damage accumulation on failure prediction: a comparative assessment
of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet
metal forming}, booktitle={15. Deutsches LS-Dyna Forum}, author={Camberg, Alan
Adam and Tröster, Thomas and Schneidt , A. and Sotirov , N. and Tölle, J.}, year={2018}
}'
chicago: 'Camberg, Alan Adam, Thomas Tröster, A. Schneidt , N. Sotirov , and J.
Tölle. “The Influence of Damage Accumulation on Failure Prediction: A Comparative
Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal
Sheet Metal Forming.” In 15. Deutsches LS-Dyna Forum, 2018.'
ieee: 'A. A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , and J. Tölle, “The
influence of damage accumulation on failure prediction: a comparative assessment
of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet
metal forming,” in 15. Deutsches LS-Dyna Forum, Bamberg, 2018.'
mla: 'Camberg, Alan Adam, et al. “The Influence of Damage Accumulation on Failure
Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the
Application in Non-Isothermal Sheet Metal Forming.” 15. Deutsches LS-Dyna Forum,
2018.'
short: 'A.A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , J. Tölle, in: 15. Deutsches
LS-Dyna Forum, 2018.'
conference:
end_date: 2018-10-17
location: Bamberg
name: 15. Deutsches LS-Dyna Forum
start_date: 2018-10-15
date_created: 2020-02-24T16:05:37Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.dynamore.de/de/download/papers/2018-ls-dyna-forum/papers-2018/dienstag-16.-oktober/process-metal-forming-iii/the-influence-of-damage-accumulation-on-failure-prediction-a-comparative-assessment-of-mat_224-and-mat_024-gissmo-for-the-application-in-non-isothermal-sheet-metal-forming
oa: '1'
popular_science: '1'
publication: 15. Deutsches LS-Dyna Forum
status: public
title: 'The influence of damage accumulation on failure prediction: a comparative
assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal
sheet metal forming'
type: conference
user_id: '60544'
year: '2018'
...
---
_id: '16045'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
citation:
ama: Camberg AA. Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von
Gesamtfahrzeugsimulationen. Carbon Composites Magazin. 2018;(2):15-16.
apa: Camberg, A. A. (2018). Top-down-Entwicklung von Faser-Metall-Laminaten auf
Grundlage von Gesamtfahrzeugsimulationen. Carbon Composites Magazin, (2),
15–16.
bibtex: '@article{Camberg_2018, title={Top-down-Entwicklung von Faser-Metall-Laminaten
auf Grundlage von Gesamtfahrzeugsimulationen}, number={2}, journal={Carbon Composites
Magazin}, author={Camberg, Alan Adam}, year={2018}, pages={15–16} }'
chicago: 'Camberg, Alan Adam. “Top-down-Entwicklung von Faser-Metall-Laminaten auf
Grundlage von Gesamtfahrzeugsimulationen.” Carbon Composites Magazin, no.
2 (2018): 15–16.'
ieee: A. A. Camberg, “Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage
von Gesamtfahrzeugsimulationen,” Carbon Composites Magazin, no. 2, pp.
15–16, 2018.
mla: Camberg, Alan Adam. “Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage
von Gesamtfahrzeugsimulationen.” Carbon Composites Magazin, no. 2, 2018,
pp. 15–16.
short: A.A. Camberg, Carbon Composites Magazin (2018) 15–16.
date_created: 2020-02-24T16:09:35Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
issue: '2'
language:
- iso: ger
page: 15-16
publication: Carbon Composites Magazin
publication_identifier:
issn:
- 2366-8024
status: public
title: Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen
type: journal_article
user_id: '72008'
year: '2018'
...
---
_id: '16056'
author:
- first_name: Swetlana
full_name: Schweizer, Swetlana
id: '8938'
last_name: Schweizer
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Schweizer S, Tröster T. Holz als Werkstoff im Automobil. In: ; 2018.'
apa: Schweizer, S., & Tröster, T. (2018). Holz als Werkstoff im Automobil.
2. Siegener Leichtbaukolloquium, Siegen.
bibtex: '@inproceedings{Schweizer_Tröster_2018, title={Holz als Werkstoff im Automobil},
author={Schweizer, Swetlana and Tröster, Thomas}, year={2018} }'
chicago: Schweizer, Swetlana, and Thomas Tröster. “Holz als Werkstoff im Automobil,”
2018.
ieee: S. Schweizer and T. Tröster, “Holz als Werkstoff im Automobil,” presented
at the 2. Siegener Leichtbaukolloquium, Siegen, 2018.
mla: Schweizer, Swetlana, and Thomas Tröster. Holz als Werkstoff im Automobil.
2018.
short: 'S. Schweizer, T. Tröster, in: 2018.'
conference:
location: Siegen
name: 2. Siegener Leichtbaukolloquium
start_date: 2018-10-16
date_created: 2020-02-24T16:24:19Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Holz als Werkstoff im Automobil
type: conference_abstract
user_id: '8938'
year: '2018'
...
---
_id: '16057'
author:
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wang Z, Tröster T. Herstellung hybrider Strukturkomponenten in einem modifizierten
VARTM-Prozess. In: ; 2018.'
apa: Wang, Z., & Tröster, T. (2018). Herstellung hybrider Strukturkomponenten
in einem modifizierten VARTM-Prozess. Presented at the 2. Siegener Leichtbaukolloquium,
Siegen.
bibtex: '@inproceedings{Wang_Tröster_2018, title={Herstellung hybrider Strukturkomponenten
in einem modifizierten VARTM-Prozess}, author={Wang, Z. and Tröster, Thomas},
year={2018} }'
chicago: Wang, Z., and Thomas Tröster. “Herstellung hybrider Strukturkomponenten
in einem modifizierten VARTM-Prozess,” 2018.
ieee: Z. Wang and T. Tröster, “Herstellung hybrider Strukturkomponenten in einem
modifizierten VARTM-Prozess,” presented at the 2. Siegener Leichtbaukolloquium,
Siegen, 2018.
mla: Wang, Z., and Thomas Tröster. Herstellung hybrider Strukturkomponenten in
einem modifizierten VARTM-Prozess. 2018.
short: 'Z. Wang, T. Tröster, in: 2018.'
conference:
location: Siegen
name: 2. Siegener Leichtbaukolloquium
start_date: 2018-10-16
date_created: 2020-02-24T16:25:15Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess
type: conference
user_id: '72008'
year: '2018'
...
---
_id: '13439'
article_number: '012018'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: F
full_name: Bohner, F
last_name: Bohner
- first_name: J
full_name: Tölle, J
last_name: Tölle
- first_name: A
full_name: Schneidt, A
last_name: Schneidt
- first_name: S
full_name: Meiners, S
last_name: Meiners
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Camberg AA, Bohner F, Tölle J, Schneidt A, Meiners S, Tröster T. Formability
enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming
process: testing, calibration and evaluation of fracture models. IOP Conference
Series: Materials Science and Engineering. 2018. doi:10.1088/1757-899x/418/1/012018'
apa: 'Camberg, A. A., Bohner, F., Tölle, J., Schneidt, A., Meiners, S., & Tröster,
T. (2018). Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal
parts in a flash forming process: testing, calibration and evaluation of fracture
models. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/418/1/012018'
bibtex: '@article{Camberg_Bohner_Tölle_Schneidt_Meiners_Tröster_2018, title={Formability
enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming
process: testing, calibration and evaluation of fracture models}, DOI={10.1088/1757-899x/418/1/012018},
number={012018}, journal={IOP Conference Series: Materials Science and Engineering},
author={Camberg, Alan Adam and Bohner, F and Tölle, J and Schneidt, A and Meiners,
S and Tröster, Thomas}, year={2018} }'
chicago: 'Camberg, Alan Adam, F Bohner, J Tölle, A Schneidt, S Meiners, and Thomas
Tröster. “Formability Enhancement of EN AW-5182 H18 Aluminum Alloy Sheet Metal
Parts in a Flash Forming Process: Testing, Calibration and Evaluation of Fracture
Models.” IOP Conference Series: Materials Science and Engineering, 2018.
https://doi.org/10.1088/1757-899x/418/1/012018.'
ieee: 'A. A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, and T. Tröster,
“Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in
a flash forming process: testing, calibration and evaluation of fracture models,”
IOP Conference Series: Materials Science and Engineering, 2018.'
mla: 'Camberg, Alan Adam, et al. “Formability Enhancement of EN AW-5182 H18 Aluminum
Alloy Sheet Metal Parts in a Flash Forming Process: Testing, Calibration and Evaluation
of Fracture Models.” IOP Conference Series: Materials Science and Engineering,
012018, 2018, doi:10.1088/1757-899x/418/1/012018.'
short: 'A.A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, T. Tröster,
IOP Conference Series: Materials Science and Engineering (2018).'
date_created: 2019-09-22T17:39:04Z
date_updated: 2022-01-06T06:51:36Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1088/1757-899x/418/1/012018
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: 'IOP Conference Series: Materials Science and Engineering'
publication_identifier:
issn:
- 1757-899X
publication_status: published
status: public
title: 'Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts
in a flash forming process: testing, calibration and evaluation of fracture models'
type: journal_article
user_id: '60544'
year: '2018'
...
---
_id: '16118'
abstract:
- lang: eng
text: By adding fibers to a polymer matrix, a reinforcement of the material can
be achieved. Shortfiber-reinforced polymers can easily be processed by the Fused
Deposition Modeling (FDM)process without major modifications to the processing
machine. For instance, short fiber-reinforcedfilaments can be processed to produce
short fiber-reinforced components in the FDM process. Inmany other additive manufacturing
processes this is not possible at this low cost. The choice of thematrix material,
fiber type, fiber length and fiber orientation have a major influence on theproperties
of the produced component. In this paper, short fiber-reinforced filaments are
processedby the FDM process. The processing properties and the resulting part
properties are investigatedwith regard to fiber-specific influences. Additionally,
the effects of different strand geometries andthus changed flow fields on the
fiber orientation and mechanical part properties are investigated.
author:
- first_name: Christian
full_name: Schumacher, Christian
last_name: Schumacher
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: Stefan
full_name: Gnaase, Stefan
id: '25730'
last_name: Gnaase
citation:
ama: 'Schumacher C, Schöppner V, Gnaase S. Processing Short Fiber-reinforced Polymers
in the Fused Deposition Modeling Process. In: Proceedings of the 29th Annual
InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing
Conference. ; 2018.'
apa: Schumacher, C., Schöppner, V., & Gnaase, S. (2018). Processing Short Fiber-reinforced
Polymers in the Fused Deposition Modeling Process. Proceedings of the 29th
Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing
Conference. Solid Freeform Fabrication.
bibtex: '@inproceedings{Schumacher_Schöppner_Gnaase_2018, title={Processing Short
Fiber-reinforced Polymers in the Fused Deposition Modeling Process}, booktitle={Proceedings
of the 29th Annual InternationalSolid Freeform Fabrication Symposium – An Additive
Manufacturing Conference}, author={Schumacher, Christian and Schöppner, Volker
and Gnaase, Stefan}, year={2018} }'
chicago: Schumacher, Christian, Volker Schöppner, and Stefan Gnaase. “Processing
Short Fiber-Reinforced Polymers in the Fused Deposition Modeling Process.” In
Proceedings of the 29th Annual InternationalSolid Freeform Fabrication Symposium
– An Additive Manufacturing Conference, 2018.
ieee: C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber-reinforced
Polymers in the Fused Deposition Modeling Process,” presented at the Solid Freeform
Fabrication, 2018.
mla: Schumacher, Christian, et al. “Processing Short Fiber-Reinforced Polymers in
the Fused Deposition Modeling Process.” Proceedings of the 29th Annual InternationalSolid
Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2018.
short: 'C. Schumacher, V. Schöppner, S. Gnaase, in: Proceedings of the 29th Annual
InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing
Conference, 2018.'
conference:
name: Solid Freeform Fabrication
start_date: '2018'
date_created: 2020-02-27T14:42:04Z
date_updated: 2023-01-17T15:53:14Z
department:
- _id: '149'
extern: '1'
language:
- iso: eng
publication: Proceedings of the 29th Annual InternationalSolid Freeform Fabrication
Symposium – An Additive Manufacturing Conference
publication_status: published
status: public
title: Processing Short Fiber-reinforced Polymers in the Fused Deposition Modeling
Process
type: conference
user_id: '25730'
year: '2018'
...
---
_id: '37573'
author:
- first_name: Jörg
full_name: Niewel, Jörg
last_name: Niewel
citation:
ama: Niewel J. Untersuchungen zur induktiven Erwärmung im Warmformprozess .
Vol 2018,31. Shaker Verlag; 2018.
apa: 'Niewel, J. (2018). Untersuchungen zur induktiven Erwärmung im Warmformprozess
: Vol. 2018,31. Shaker Verlag.'
bibtex: '@book{Niewel_2018, series={Schriftenreihe Institut für Leichtbau mit Hybridsystemen},
title={Untersuchungen zur induktiven Erwärmung im Warmformprozess }, volume={2018,31},
publisher={Shaker Verlag}, author={Niewel, Jörg}, year={2018}, collection={Schriftenreihe
Institut für Leichtbau mit Hybridsystemen} }'
chicago: Niewel, Jörg. Untersuchungen zur induktiven Erwärmung im Warmformprozess
. Vol. 2018,31. Schriftenreihe Institut für Leichtbau mit Hybridsystemen.
Shaker Verlag, 2018.
ieee: J. Niewel, Untersuchungen zur induktiven Erwärmung im Warmformprozess ,
vol. 2018,31. Shaker Verlag, 2018.
mla: Niewel, Jörg. Untersuchungen zur induktiven Erwärmung im Warmformprozess
. Shaker Verlag, 2018.
short: J. Niewel, Untersuchungen zur induktiven Erwärmung im Warmformprozess , Shaker
Verlag, 2018.
date_created: 2023-01-19T11:29:22Z
date_updated: 2023-01-19T11:29:26Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
extern: '1'
keyword:
- Manganlegierung
- Borlegierung
- Formhärten
- Temperaturverteilung
- Blechumformen
- Warmumformen
- Rollofen
- Erwärmung
- Induktive Erwärmung
- Prozessanalyse
- Wirtschaftlichkeit
- Kraftfahrzeugbau
- Leichtbau
- Hochschulschrift
language:
- iso: ger
page: '160'
publication_identifier:
isbn:
- '978-3-8440-6086-7 '
publication_status: published
publisher: Shaker Verlag
series_title: Schriftenreihe Institut für Leichtbau mit Hybridsystemen
status: public
supervisor:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
title: 'Untersuchungen zur induktiven Erwärmung im Warmformprozess '
type: dissertation
user_id: '15952'
volume: 2018,31
year: '2018'
...
---
_id: '16052'
author:
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
- first_name: Silvia
full_name: Dohmeier-Fischer, Silvia
id: '16203'
last_name: Dohmeier-Fischer
- first_name: Nathalie
full_name: Weiß-Borkowski, Nathalie
last_name: Weiß-Borkowski
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Horwath I, Dohmeier-Fischer S, Weiß-Borkowski N, Tröster T. FROM EMPOWERMENT
TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.
In: INTED2018 Proceedings. ; 2018. doi:10.21125/inted.2018.1651'
apa: 'Horwath, I., Dohmeier-Fischer, S., Weiß-Borkowski, N., & Tröster, T. (2018).
FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS
IN LIGHTWEIGHT ENGINEERING. INTED2018 Proceedings. 12th International Technology,
Education and Development Conference, Valencia. https://doi.org/10.21125/inted.2018.1651'
bibtex: '@inproceedings{Horwath_Dohmeier-Fischer_Weiß-Borkowski_Tröster_2018, title={FROM
EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT
ENGINEERING}, DOI={10.21125/inted.2018.1651},
booktitle={INTED2018 Proceedings}, author={Horwath, Ilona and Dohmeier-Fischer,
Silvia and Weiß-Borkowski, Nathalie and Tröster, Thomas}, year={2018} }'
chicago: 'Horwath, Ilona, Silvia Dohmeier-Fischer, Nathalie Weiß-Borkowski, and
Thomas Tröster. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY
RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.” In INTED2018 Proceedings,
2018. https://doi.org/10.21125/inted.2018.1651.'
ieee: 'I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, and T. Tröster, “FROM
EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT
ENGINEERING,” presented at the 12th International Technology, Education and Development
Conference, Valencia, 2018, doi: 10.21125/inted.2018.1651.'
mla: 'Horwath, Ilona, et al. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY
RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.” INTED2018 Proceedings, 2018,
doi:10.21125/inted.2018.1651.'
short: 'I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, T. Tröster, in: INTED2018
Proceedings, 2018.'
conference:
end_date: 2018-03-06
location: Valencia
name: 12th International Technology, Education and Development Conference
start_date: 2018-03-05
date_created: 2020-02-24T16:16:58Z
date_updated: 2023-05-22T08:18:17Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.21125/inted.2018.1651
language:
- iso: eng
publication: INTED2018 Proceedings
publication_identifier:
isbn:
- '9788469794807'
publication_status: published
status: public
title: 'FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS
IN LIGHTWEIGHT ENGINEERING'
type: conference
user_id: '72008'
year: '2018'
...