--- _id: '16065' author: - first_name: P. full_name: Kutz, P. last_name: Kutz - first_name: Z. full_name: Wang, Z. last_name: Wang - first_name: M. full_name: Ellouz, M. last_name: Ellouz - first_name: T. full_name: Kordisch, T. last_name: Kordisch - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Kutz P, Wang Z, Ellouz M, Kordisch T, Tröster T. Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. In: ; 2017.' apa: Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., & Tröster, T. (2017). Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. Presented at the 2nd Conference & Exhibition on Light Materials, Bremen. bibtex: '@inproceedings{Kutz_Wang_Ellouz_Kordisch_Tröster_2017, title={Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test}, author={Kutz, P. and Wang, Z. and Ellouz, M. and Kordisch, T. and Tröster, Thomas}, year={2017} }' chicago: Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” 2017. ieee: P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, and T. Tröster, “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” presented at the 2nd Conference & Exhibition on Light Materials, Bremen, 2017. mla: Kutz, P., et al. Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. 2017. short: 'P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.' conference: end_date: 2017-11-10 location: Bremen name: 2nd Conference & Exhibition on Light Materials start_date: 2017-11-08 date_created: 2020-02-24T16:38:15Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test type: conference user_id: '72008' year: '2017' ... --- _id: '16070' author: - first_name: 'Nathalie ' full_name: 'Weiß Borkowski, Nathalie ' last_name: Weiß Borkowski citation: ama: Weiß Borkowski N. Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22; 2017. apa: Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22. bibtex: '@book{Weiß Borkowski_2017, title={Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen}, publisher={Shaker Verlag Band 2017/22}, author={Weiß Borkowski, Nathalie }, year={2017} }' chicago: Weiß Borkowski, Nathalie . Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017. ieee: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017. mla: Weiß Borkowski, Nathalie. Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017. short: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017. date_created: 2020-02-25T10:24:55Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger publication_identifier: isbn: - 978-3-8440-5013-4 publisher: Shaker Verlag Band 2017/22 status: public supervisor: - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster title: Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter Strukturen type: dissertation user_id: '72008' year: '2017' ... --- _id: '16071' author: - first_name: Z. full_name: Wang, Z. last_name: Wang - first_name: P. full_name: Kutz, P. last_name: Kutz - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Wang Z, Kutz P, Tröster T. Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. In: ; 2017.' apa: Wang, Z., Kutz, P., & Tröster, T. (2017). Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. Presented at the 15. Bielefelder Werkstofftag, Bielefeld. bibtex: '@inproceedings{Wang_Kutz_Tröster_2017, title={Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen}, author={Wang, Z. and Kutz, P. and Tröster, Thomas}, year={2017} }' chicago: Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” 2017. ieee: Z. Wang, P. Kutz, and T. Tröster, “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” presented at the 15. Bielefelder Werkstofftag, Bielefeld, 2017. mla: Wang, Z., et al. Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. 2017. short: 'Z. Wang, P. Kutz, T. Tröster, in: 2017.' conference: location: Bielefeld name: 15. Bielefelder Werkstofftag start_date: 06. April 2017 date_created: 2020-02-25T10:30:04Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger status: public title: Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen type: conference user_id: '72008' year: '2017' ... --- _id: '16072' author: - first_name: N. full_name: Weiß Borkowski, N. last_name: Weiß Borkowski - first_name: Alan Adam full_name: Camberg, Alan Adam id: '60544' last_name: Camberg - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Thorsten full_name: Marten, Thorsten id: '338' last_name: Marten citation: ama: 'Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. In: ; 2017.' apa: Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM Conference, Schloss Hohenkammer. bibtex: '@inproceedings{Weiß Borkowski_Camberg_Tröster_Marten_2017, title={Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH}, author={Weiß Borkowski, N. and Camberg, Alan Adam and Tröster, Thomas and Marten, Thorsten}, year={2017} }' chicago: Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten. “Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH,” 2017. ieee: N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM Conference, Schloss Hohenkammer, 2017. mla: Weiß Borkowski, N., et al. Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH. 2017. short: 'N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.' conference: location: Schloss Hohenkammer name: 4th MATFEM Conference start_date: 2017-04-25 date_created: 2020-02-25T10:37:14Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH type: conference user_id: '72008' year: '2017' ... --- _id: '16073' author: - first_name: N. full_name: Weiß Borkowski, N. last_name: Weiß Borkowski - first_name: Thorsten full_name: Marten, Thorsten id: '338' last_name: Marten - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: A. full_name: Schulz Beenken, A. last_name: Schulz Beenken citation: ama: 'Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. In: ; 2017.' apa: Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017). Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. Presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA. bibtex: '@inproceedings{Weiß Borkowski_Marten_Tröster_Schulz Beenken_2017, title={Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates}, author={Weiß Borkowski, N. and Marten, Thorsten and Tröster, Thomas and Schulz Beenken, A.}, year={2017} }' chicago: Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken. “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” 2017. ieee: N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017. mla: Weiß Borkowski, N., et al. Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. 2017. short: 'N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.' conference: end_date: 2017-06-07 location: Atlanta, USA name: 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017) start_date: 2017-06-04 date_created: 2020-02-25T10:46:26Z date_updated: 2022-01-06T06:52:43Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng publication_identifier: isbn: - 978-1-935117-66-7 status: public title: Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates type: conference user_id: '72008' year: '2017' ... --- _id: '16074' author: - first_name: Dominik full_name: Ahlers, Dominik id: '11207' last_name: Ahlers - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In: ; 2017.' apa: Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt. bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Materialkombinationen in der additive Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017} }' chicago: Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive Fertigung,” 2017. ieee: D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,” presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017. mla: Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive Fertigung. 2017. short: 'D. Ahlers, T. Tröster, in: 2017.' conference: location: Erfurt name: Rapid.Tech 2017 – Fachforum Luftfahrt start_date: 2017-06-22 date_created: 2020-02-25T10:52:14Z date_updated: 2022-01-06T06:52:43Z department: - _id: '9' - _id: '321' - _id: '149' - _id: '219' language: - iso: ger status: public title: Materialkombinationen in der additive Fertigung type: conference user_id: '11207' year: '2017' ... --- _id: '16075' author: - first_name: Dominik full_name: Ahlers, Dominik id: '11207' last_name: Ahlers - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung. In: ; 2017.' apa: 'Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen.' bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Aspekte der Produktentwicklung in der additiven Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017} }' chicago: Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in der additiven Fertigung,” 2017. ieee: 'D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen, 2017.' mla: Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der additiven Fertigung. 2017. short: 'D. Ahlers, T. Tröster, in: 2017.' conference: location: Nördlingen name: 'Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil' start_date: 2017-07-04 date_created: 2020-02-25T10:55:13Z date_updated: 2022-01-06T06:52:43Z department: - _id: '9' - _id: '321' - _id: '149' - _id: '219' language: - iso: ger status: public title: Aspekte der Produktentwicklung in der additiven Fertigung type: conference user_id: '11207' year: '2017' ... --- _id: '16068' author: - first_name: Thorsten full_name: Marten, Thorsten id: '338' last_name: Marten citation: ama: Marten T. Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag; 2017. apa: Marten, T. (2017). Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag. bibtex: '@book{Marten_2017, title={Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen}, publisher={Shaker Verlag}, author={Marten, Thorsten}, year={2017} }' chicago: Marten, Thorsten. Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag, 2017. ieee: T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag, 2017. mla: Marten, Thorsten. Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen. Shaker Verlag, 2017. short: T. Marten, Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen, Shaker Verlag, 2017. date_created: 2020-02-24T16:44:36Z date_updated: 2023-12-20T09:27:52Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger publication_identifier: isbn: - '9783844055184' - '3844055185' publisher: Shaker Verlag status: public title: Erweiterung des Portfolios presshärtbarer Stähle durch gezielte Werkstoff- und Prozessmodifikationen type: dissertation user_id: '338' year: '2017' ... --- _id: '37564' abstract: - lang: ger text: Die Bedeutung von beanspruchungsangepassten Bauteilen aus metallischer Grundstruktur verstärkt mit einem Faserverbundkunststoff (FVK) steigt im automobilen Leichtbau stark an. Ein Verfahren zur Herstellung dieser hybriden Strukturen ist das Prepreg-Pressen. Bei diesem Verfahren wird der FVK direkt unter Temperatur und Druck auf die metallische Grundstruktur geklebt, wobei es aufgrund der deutlich unterschiedlichen Wärmeausdehnungskoeffizienten zu starken Eigenspannungen im Bauteil kommt. Diese prozessinduzierten Eigenspannungen wurden im Rahmen dieser Arbeit reduziert. Dazu wurde in einem ersten Schritt die Ausgangslage untersucht, indem die Eigenspannungen analytisch berechnet sowie experimentell untersucht wurden. Im zweiten Schritt wurde ein Konzept zur Reduzierung dieser erarbeitet. Hierbei spielt vor allem die Temperaturverteilung im Bauteil eine entscheidende Rolle, die analytisch, numerisch sowie praktisch bestimmt wurde. Im Anschluss wurden die Parameter dieses angepassten Verfahrens optimiert. In weiteren Optimierungsschritten wurde der Einfluss unterschiedlicher Materialien auf die induzierten Eigenspannungen sowie auf die mechanischen Eigenschaften des Gesamtverbundes untersucht. Die Eigenspannungen konnten mithilfe des optimierten Verfahrens deutlich reduziert werden. Abschließend wurden die Ergebnisse in einer Methodik zur Herstellung eigenspannungsoptimierter asymmetrischer Hybride zusammengefasst. author: - first_name: Meike Maria full_name: Frantz, Meike Maria last_name: Frantz citation: ama: Frantz MM. Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen. Vol 2017,25. Shaker Verlag; 2017. apa: 'Frantz, M. M. (2017). Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen: Vol. 2017,25. Shaker Verlag.' bibtex: '@book{Frantz_2017, series={Schriftenreihe Institut für Leichtbau mit Hybridsystemen}, title={Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen}, volume={2017,25}, publisher={Shaker Verlag}, author={Frantz, Meike Maria}, year={2017}, collection={Schriftenreihe Institut für Leichtbau mit Hybridsystemen} }' chicago: Frantz, Meike Maria. Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen. Vol. 2017,25. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2017. ieee: M. M. Frantz, Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen, vol. 2017,25. Shaker Verlag, 2017. mla: Frantz, Meike Maria. Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen. Shaker Verlag, 2017. short: M.M. Frantz, Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen, Shaker Verlag, 2017. date_created: 2023-01-19T11:17:26Z date_updated: 2023-01-19T11:24:23Z department: - _id: '9' - _id: '149' - _id: '321' extern: '1' language: - iso: ger page: '144' publication_identifier: isbn: - 978-3-8440-5251-0 publication_status: published publisher: Shaker Verlag series_title: Schriftenreihe Institut für Leichtbau mit Hybridsystemen status: public supervisor: - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster title: Analyse und Optimierung der Delta-Alpha-Problematik im Fertigungsprozess von asymmetrischen hybriden Werkstoffen aus Metall und faserverstärkten Kunststoffen type: dissertation user_id: '15952' volume: 2017,25 year: '2017' ... --- _id: '15961' article_number: '244' author: - first_name: Kay André full_name: Weidenmann, Kay André last_name: Weidenmann - first_name: Florentin full_name: Pottmeyer, Florentin last_name: Pottmeyer - first_name: Zheng full_name: Wang, Zheng last_name: Wang - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Dieter full_name: Meiners, Dieter last_name: Meiners - first_name: Carolin full_name: Zinn, Carolin last_name: Zinn - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Jonathan Serna full_name: Gonzalez, Jonathan Serna last_name: Gonzalez citation: ama: 'Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites. Published online 2017. doi:10.1504/ijautoc.2016.10005303' apa: 'Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., & Gonzalez, J. S. (2017). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244. https://doi.org/10.1504/ijautoc.2016.10005303' bibtex: '@article{Weidenmann_Pottmeyer_Wang_Tröster_Meiners_Zinn_Schaper_Gonzalez_2017, title={Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids}, DOI={10.1504/ijautoc.2016.10005303}, number={244}, journal={International Journal of Automotive Composites}, author={Weidenmann, Kay André and Pottmeyer, Florentin and Wang, Zheng and Tröster, Thomas and Meiners, Dieter and Zinn, Carolin and Schaper, Mirko and Gonzalez, Jonathan Serna}, year={2017} }' chicago: 'Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2017. https://doi.org/10.1504/ijautoc.2016.10005303.' ieee: 'K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2017, doi: 10.1504/ijautoc.2016.10005303.' mla: 'Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2017, doi:10.1504/ijautoc.2016.10005303.' short: K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017). date_created: 2020-02-21T14:36:15Z date_updated: 2023-06-01T14:20:17Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.1504/ijautoc.2016.10005303 language: - iso: eng publication: International Journal of Automotive Composites publication_identifier: issn: - 2051-8218 - 2051-8226 publication_status: published quality_controlled: '1' status: public title: 'Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids' type: journal_article user_id: '43720' year: '2017' ... --- _id: '59977' abstract: - lang: eng text: In the present paper, the crashworthiness of fabric-reinforced thermoplastic composites is experimentally and numerically investigated under axial impact loading. Main aim of this article is the qualification of large-scale producible structures for energy absorbing applications. For this reason, the considerable steps of thermo-forming as well as relevant process parameters are identified. This includes the development of an appropriate handling system for production on lab-scale. Formed three-dimensional profiles are tested under axial impact loading in a drop tower to initiate a continuous progressive crushing mode. Experimental results are analysed and evaluated regarding specific energy absorption (SEA). Numerical analysis by the explicit finite element code LS-Dyna is based on the orthotropic material model MAT54 and a four-layered shell model to implement crushing failure. Investigations show, that energy absorbing structures made of bidirectional organic sheets are suitable for automotive lightweight design. author: - first_name: Jan Andre full_name: Striewe, Jan Andre id: '29413' last_name: Striewe - first_name: C. full_name: Reuter, C. last_name: Reuter - first_name: K.-H. full_name: Sauerland, K.-H. last_name: Sauerland - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Striewe JA, Reuter C, Sauerland K-H, Tröster T. Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures. 2017;123:501-508. doi:10.1016/j.tws.2017.11.011 apa: Striewe, J. A., Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures, 123, 501–508. https://doi.org/10.1016/j.tws.2017.11.011 bibtex: '@article{Striewe_Reuter_Sauerland_Tröster_2017, title={Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites}, volume={123}, DOI={10.1016/j.tws.2017.11.011}, journal={Thin-Walled Structures}, publisher={Elsevier BV}, author={Striewe, Jan Andre and Reuter, C. and Sauerland, K.-H. and Tröster, Thomas}, year={2017}, pages={501–508} }' chicago: 'Striewe, Jan Andre, C. Reuter, K.-H. Sauerland, and Thomas Tröster. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.” Thin-Walled Structures 123 (2017): 501–8. https://doi.org/10.1016/j.tws.2017.11.011.' ieee: 'J. A. Striewe, C. Reuter, K.-H. Sauerland, and T. Tröster, “Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites,” Thin-Walled Structures, vol. 123, pp. 501–508, 2017, doi: 10.1016/j.tws.2017.11.011.' mla: Striewe, Jan Andre, et al. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.” Thin-Walled Structures, vol. 123, Elsevier BV, 2017, pp. 501–08, doi:10.1016/j.tws.2017.11.011. short: J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures 123 (2017) 501–508. date_created: 2025-05-19T06:47:48Z date_updated: 2025-05-19T06:52:09Z department: - _id: '9' - _id: '149' - _id: '321' doi: 10.1016/j.tws.2017.11.011 intvolume: ' 123' language: - iso: eng page: 501-508 publication: Thin-Walled Structures publication_identifier: issn: - 0263-8231 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites type: journal_article user_id: '15952' volume: 123 year: '2017' ... --- _id: '41530' author: - first_name: Florian full_name: Hengsbach, Florian id: '14073' last_name: Hengsbach - first_name: Peter full_name: Koppa, Peter last_name: Koppa - first_name: Kristina full_name: Duschik, Kristina last_name: Duschik - first_name: Martin Joachim full_name: Holzweissig, Martin Joachim last_name: Holzweissig - first_name: Madison full_name: Burns, Madison last_name: Burns - first_name: Jens full_name: Nellesen, Jens last_name: Nellesen - first_name: Wolfgang full_name: Tillmann, Wolfgang last_name: Tillmann - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. 2017;133:136-142. doi:10.1016/j.matdes.2017.07.046 apa: Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., & Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design, 133, 136–142. https://doi.org/10.1016/j.matdes.2017.07.046 bibtex: '@article{Hengsbach_Koppa_Duschik_Holzweissig_Burns_Nellesen_Tillmann_Tröster_Hoyer_Schaper_2017, title={Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties}, volume={133}, DOI={10.1016/j.matdes.2017.07.046}, journal={Materials & Design}, publisher={Elsevier BV}, author={Hengsbach, Florian and Koppa, Peter and Duschik, Kristina and Holzweissig, Martin Joachim and Burns, Madison and Nellesen, Jens and Tillmann, Wolfgang and Tröster, Thomas and Hoyer, Kay-Peter and Schaper, Mirko}, year={2017}, pages={136–142} }' chicago: 'Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design 133 (2017): 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.' ieee: 'F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, vol. 133, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.' mla: Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046. short: F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design 133 (2017) 136–142. date_created: 2023-02-02T14:47:57Z date_updated: 2025-06-06T08:25:43Z department: - _id: '9' - _id: '158' - _id: '149' - _id: '321' doi: 10.1016/j.matdes.2017.07.046 intvolume: ' 133' keyword: - Mechanical Engineering - Mechanics of Materials - General Materials Science language: - iso: eng page: 136-142 publication: Materials & Design publication_identifier: issn: - 0264-1275 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties type: journal_article user_id: '15952' volume: 133 year: '2017' ... --- _id: '16066' author: - first_name: Dominik full_name: Ahlers, Dominik id: '11207' last_name: Ahlers - first_name: Peter full_name: Koppa, Peter last_name: Koppa - first_name: Florian full_name: Hengsbach, Florian id: '14073' last_name: Hengsbach - first_name: P. full_name: Gloetter, P. last_name: Gloetter - first_name: A. full_name: Altmann, A. last_name: Altmann - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Ahlers D, Koppa P, Hengsbach F, et al. Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. In: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. ; 2017.' apa: Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., & Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA. bibtex: '@inproceedings{Ahlers_Koppa_Hengsbach_Gloetter_Altmann_Schaper_Tröster_2017, title={Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing}, booktitle={Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference}, author={Ahlers, Dominik and Koppa, Peter and Hengsbach, Florian and Gloetter, P. and Altmann, A. and Schaper, Mirko and Tröster, Thomas}, year={2017} }' chicago: Ahlers, Dominik, Peter Koppa, Florian Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017. ieee: D. Ahlers et al., “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017. mla: Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017. short: 'D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.' conference: end_date: 2017-11-10 location: Austin, Texas, USA name: 28th Annual International Solid Freeform Fabrication Symposium 2017 start_date: 2017-11-08 date_created: 2020-02-24T16:41:38Z date_updated: 2025-06-06T08:29:48Z department: - _id: '9' - _id: '321' - _id: '149' - _id: '219' - _id: '158' language: - iso: eng publication: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference status: public title: Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing type: conference user_id: '15952' year: '2017' ... --- _id: '24108' author: - first_name: Florian full_name: Hengsbach, Florian id: '14073' last_name: Hengsbach - first_name: Peter full_name: Koppa, Peter last_name: Koppa - first_name: Kristina full_name: Duschik, Kristina last_name: Duschik - first_name: Martin Joachim full_name: Holzweissig, Martin Joachim last_name: Holzweissig - first_name: Madison full_name: Burns, Madison last_name: Burns - first_name: Jens full_name: Nellesen, Jens last_name: Nellesen - first_name: Wolfgang full_name: Tillmann, Wolfgang last_name: Tillmann - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Kay-Peter full_name: Hoyer, Kay-Peter id: '48411' last_name: Hoyer - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. Published online 2017:136-142. doi:10.1016/j.matdes.2017.07.046 apa: Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., & Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design, 136–142. https://doi.org/10.1016/j.matdes.2017.07.046 bibtex: '@article{Hengsbach_Koppa_Duschik_Holzweissig_Burns_Nellesen_Tillmann_Tröster_Hoyer_Schaper_2017, title={Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties}, DOI={10.1016/j.matdes.2017.07.046}, journal={Materials & Design}, author={Hengsbach, Florian and Koppa, Peter and Duschik, Kristina and Holzweissig, Martin Joachim and Burns, Madison and Nellesen, Jens and Tillmann, Wolfgang and Tröster, Thomas and Hoyer, Kay-Peter and Schaper, Mirko}, year={2017}, pages={136–142} }' chicago: Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, 136–42. https://doi.org/10.1016/j.matdes.2017.07.046. ieee: 'F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.' mla: Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046. short: F. Hengsbach, P. Koppa, K. Duschik, M.J. Holzweissig, M. Burns, J. Nellesen, W. Tillmann, T. Tröster, K.-P. Hoyer, M. Schaper, Materials & Design (2017) 136–142. date_created: 2021-09-10T07:17:59Z date_updated: 2025-06-06T08:29:02Z department: - _id: '9' - _id: '158' - _id: '149' - _id: '321' doi: 10.1016/j.matdes.2017.07.046 language: - iso: eng page: 136-142 publication: Materials & Design publication_identifier: issn: - 0264-1275 publication_status: published quality_controlled: '1' status: public title: Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties type: journal_article user_id: '15952' year: '2017' ... --- _id: '15978' author: - first_name: Alper full_name: Tasdemirci, Alper last_name: Tasdemirci - first_name: Firat full_name: Tüzgel, Firat last_name: Tüzgel - first_name: Erkan full_name: Güzel, Erkan last_name: Güzel - first_name: Emine Fulya full_name: Akbulut Irmak, Emine Fulya id: '72008' last_name: Akbulut Irmak orcid: 0000-0002-1338-810X - first_name: Mustafa full_name: Güden, Mustafa last_name: Güden citation: ama: 'Tasdemirci A, Tüzgel F, Güzel E, Akbulut Irmak EF, Güden M. The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments. In: The British Society for Strain Measurement; 2016.' apa: 'Tasdemirci, A., Tüzgel, F., Güzel, E., Akbulut Irmak, E. F., & Güden, M. (2016). The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments. Presented at the 11th International Conference on Advances in Experimental Mechanics, Exeter, London: The British Society for Strain Measurement.' bibtex: '@inproceedings{Tasdemirci_Tüzgel_Güzel_Akbulut Irmak_Güden_2016, title={The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments}, publisher={The British Society for Strain Measurement}, author={Tasdemirci, Alper and Tüzgel, Firat and Güzel, Erkan and Akbulut Irmak, Emine Fulya and Güden, Mustafa}, year={2016} }' chicago: Tasdemirci, Alper, Firat Tüzgel, Erkan Güzel, Emine Fulya Akbulut Irmak, and Mustafa Güden. “The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments.” The British Society for Strain Measurement, 2016. ieee: A. Tasdemirci, F. Tüzgel, E. Güzel, E. F. Akbulut Irmak, and M. Güden, “The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments,” presented at the 11th International Conference on Advances in Experimental Mechanics, Exeter, London, 2016. mla: Tasdemirci, Alper, et al. The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments. The British Society for Strain Measurement, 2016. short: 'A. Tasdemirci, F. Tüzgel, E. Güzel, E.F. Akbulut Irmak, M. Güden, in: The British Society for Strain Measurement, 2016.' conference: end_date: 2016-09-07 location: Exeter, London name: 11th International Conference on Advances in Experimental Mechanics start_date: 2016-09-05 date_created: 2020-02-21T15:40:18Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' extern: '1' language: - iso: eng publisher: The British Society for Strain Measurement status: public title: The Investigation of the Dynamic Deformation Behaviour of a 304L Steel Plate with Direct-Pressure Pulse Experiments type: conference user_id: '72008' year: '2016' ... --- _id: '16139' author: - first_name: Swetlana full_name: Schweizer, Swetlana id: '8938' last_name: Schweizer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Schweizer S, Tröster T. Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin. 2016;(2):23. apa: Schweizer, S., & Tröster, T. (2016). Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin, (2), 23. bibtex: '@article{Schweizer_Tröster_2016, title={Recyclingkonzepte für hybride Strukturen}, number={2}, journal={Carbon Composites Magazin}, author={Schweizer, Swetlana and Tröster, Thomas}, year={2016}, pages={23} }' chicago: 'Schweizer, Swetlana, and Thomas Tröster. “Recyclingkonzepte für hybride Strukturen.” Carbon Composites Magazin, no. 2 (2016): 23.' ieee: S. Schweizer and T. Tröster, “Recyclingkonzepte für hybride Strukturen,” Carbon Composites Magazin, no. 2, p. 23, 2016. mla: Schweizer, Swetlana, and Thomas Tröster. “Recyclingkonzepte für hybride Strukturen.” Carbon Composites Magazin, no. 2, 2016, p. 23. short: S. Schweizer, T. Tröster, Carbon Composites Magazin (2016) 23. date_created: 2020-02-27T15:54:59Z date_updated: 2022-01-06T06:52:44Z department: - _id: '9' - _id: '321' - _id: '149' issue: '2' language: - iso: ger page: '23' publication: Carbon Composites Magazin status: public title: Recyclingkonzepte für hybride Strukturen type: journal_article user_id: '72008' year: '2016' ... --- _id: '16142' abstract: - lang: eng text: The increasing use of hybrid materials requires efficient manufacturing processes. With the concept of the intrinsic hybrids the shaping or forming of the part is combined with the hybridization in the same process step and thereby the same tool. Hence new tooling concepts, which realise the process requirements, are necessary. This paper describes tooling concepts and design methods for the manufacturing of intrinsic hybrid parts. Different solutions for rotational and planar parts with thermosetting or thermoplastic matrix material are presented. Additionally the integration of inserts in such tools is discussed. Finally the main challenges for the design of tools for intrinsic hybrids will be presented. author: - first_name: Zheng full_name: Wang, Zheng last_name: Wang - first_name: Matthias full_name: Riemer, Matthias last_name: Riemer - first_name: Simon Frederik full_name: Koch, Simon Frederik last_name: Koch - first_name: Daniel full_name: Barfuss, Daniel last_name: Barfuss - first_name: Raik full_name: Grützner, Raik last_name: Grützner - first_name: Florian full_name: Augenthaler, Florian last_name: Augenthaler - first_name: Jan full_name: Schwennen, Jan last_name: Schwennen citation: ama: 'Wang Z, Riemer M, Koch SF, et al. Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies. Advanced Materials Research. 2016:247-254. doi:10.4028/www.scientific.net/amr.1140.247' apa: 'Wang, Z., Riemer, M., Koch, S. F., Barfuss, D., Grützner, R., Augenthaler, F., & Schwennen, J. (2016). Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies. Advanced Materials Research, 247–254. https://doi.org/10.4028/www.scientific.net/amr.1140.247' bibtex: '@article{Wang_Riemer_Koch_Barfuss_Grützner_Augenthaler_Schwennen_2016, title={Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies}, DOI={10.4028/www.scientific.net/amr.1140.247}, journal={Advanced Materials Research}, author={Wang, Zheng and Riemer, Matthias and Koch, Simon Frederik and Barfuss, Daniel and Grützner, Raik and Augenthaler, Florian and Schwennen, Jan}, year={2016}, pages={247–254} }' chicago: 'Wang, Zheng, Matthias Riemer, Simon Frederik Koch, Daniel Barfuss, Raik Grützner, Florian Augenthaler, and Jan Schwennen. “Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies.” Advanced Materials Research, 2016, 247–54. https://doi.org/10.4028/www.scientific.net/amr.1140.247.' ieee: 'Z. Wang et al., “Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies,” Advanced Materials Research, pp. 247–254, 2016.' mla: 'Wang, Zheng, et al. “Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies.” Advanced Materials Research, 2016, pp. 247–54, doi:10.4028/www.scientific.net/amr.1140.247.' short: Z. Wang, M. Riemer, S.F. Koch, D. Barfuss, R. Grützner, F. Augenthaler, J. Schwennen, Advanced Materials Research (2016) 247–254. date_created: 2020-02-27T15:58:34Z date_updated: 2022-01-06T06:52:44Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.4028/www.scientific.net/amr.1140.247 language: - iso: eng page: 247-254 publication: Advanced Materials Research publication_identifier: issn: - 1662-8985 publication_status: published status: public title: 'Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies' type: journal_article user_id: '72008' year: '2016' ... --- _id: '16144' abstract: - lang: eng text: This publication describes new process chain approaches for the manufacturing of intrinsic hybrid composites for lightweight structures. The introduced process chains show a variety of different part and sample types, like insert technology for fastening of hollow hybrid shafts and profiles. Another field of research are hybrid laminates with different layers of carbon fiber reinforced plastics stacked with aluminum or steel sheets. The derived process chains base on automated fiber placement, resin transfer molding, deep drawing, rotational molding and integral tube blow molding. author: - first_name: Simon Frederik full_name: Koch, Simon Frederik last_name: Koch - first_name: Daniel full_name: Barfuss, Daniel last_name: Barfuss - first_name: Mathias full_name: Bobbert, Mathias last_name: Bobbert - first_name: Lukas full_name: Groß, Lukas last_name: Groß - first_name: Raik full_name: Grützner, Raik last_name: Grützner - first_name: Matthias full_name: Riemer, Matthias last_name: Riemer - first_name: Daniel full_name: Stefaniak, Daniel last_name: Stefaniak - first_name: Zheng full_name: Wang, Zheng last_name: Wang citation: ama: 'Koch SF, Barfuss D, Bobbert M, et al. Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches. Advanced Materials Research. 2016:239-246. doi:10.4028/www.scientific.net/amr.1140.239' apa: 'Koch, S. F., Barfuss, D., Bobbert, M., Groß, L., Grützner, R., Riemer, M., … Wang, Z. (2016). Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches. Advanced Materials Research, 239–246. https://doi.org/10.4028/www.scientific.net/amr.1140.239' bibtex: '@article{Koch_Barfuss_Bobbert_Groß_Grützner_Riemer_Stefaniak_Wang_2016, title={Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches}, DOI={10.4028/www.scientific.net/amr.1140.239}, journal={Advanced Materials Research}, author={Koch, Simon Frederik and Barfuss, Daniel and Bobbert, Mathias and Groß, Lukas and Grützner, Raik and Riemer, Matthias and Stefaniak, Daniel and Wang, Zheng}, year={2016}, pages={239–246} }' chicago: 'Koch, Simon Frederik, Daniel Barfuss, Mathias Bobbert, Lukas Groß, Raik Grützner, Matthias Riemer, Daniel Stefaniak, and Zheng Wang. “Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches.” Advanced Materials Research, 2016, 239–46. https://doi.org/10.4028/www.scientific.net/amr.1140.239.' ieee: 'S. F. Koch et al., “Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches,” Advanced Materials Research, pp. 239–246, 2016.' mla: 'Koch, Simon Frederik, et al. “Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches.” Advanced Materials Research, 2016, pp. 239–46, doi:10.4028/www.scientific.net/amr.1140.239.' short: S.F. Koch, D. Barfuss, M. Bobbert, L. Groß, R. Grützner, M. Riemer, D. Stefaniak, Z. Wang, Advanced Materials Research (2016) 239–246. date_created: 2020-02-27T16:01:41Z date_updated: 2022-01-06T06:52:44Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.4028/www.scientific.net/amr.1140.239 language: - iso: eng page: 239-246 publication: Advanced Materials Research publication_identifier: issn: - 1662-8985 publication_status: published status: public title: 'Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches' type: journal_article user_id: '72008' year: '2016' ... --- _id: '16145' author: - first_name: C. full_name: Reuter, C. last_name: Reuter citation: ama: Reuter C. Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen.; 2016. apa: Reuter, C. (2016). Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen. bibtex: '@book{Reuter_2016, series={Shaker Verlag Band 20/2016}, title={Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen}, author={Reuter, C.}, year={2016}, collection={Shaker Verlag Band 20/2016} }' chicago: Reuter, C. Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen. Shaker Verlag Band 20/2016, 2016. ieee: C. Reuter, Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen. 2016. mla: Reuter, C. Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen. 2016. short: C. Reuter, Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen, 2016. date_created: 2020-02-27T16:04:36Z date_updated: 2022-01-06T06:52:44Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger publication_identifier: isbn: - 978-3-8440-4797-4 series_title: Shaker Verlag Band 20/2016 status: public supervisor: - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster title: Versagensverhalten und Energieabsorptionssimulation von Faser-Kunststoff-Verbunden und Aluminium-FKV-Hybridwerkstoffen type: dissertation user_id: '72008' year: '2016' ... --- _id: '16146' author: - first_name: Volker full_name: Grienitz, Volker last_name: Grienitz - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Stefan full_name: Meiners, Stefan last_name: Meiners citation: ama: Grienitz V, Tröster T, Meiners S. Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift. 2016:36-41. doi:10.1007/s35148-016-0090-5 apa: Grienitz, V., Tröster, T., & Meiners, S. (2016). Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift, 36–41. https://doi.org/10.1007/s35148-016-0090-5 bibtex: '@article{Grienitz_Tröster_Meiners_2016, title={Technikevaluation für die generative Fertigung eines Serien-Radträgers}, DOI={10.1007/s35148-016-0090-5}, journal={ATZ - Automobiltechnische Zeitschrift}, author={Grienitz, Volker and Tröster, Thomas and Meiners, Stefan}, year={2016}, pages={36–41} }' chicago: Grienitz, Volker, Thomas Tröster, and Stefan Meiners. “Technikevaluation für die generative Fertigung eines Serien-Radträgers.” ATZ - Automobiltechnische Zeitschrift, 2016, 36–41. https://doi.org/10.1007/s35148-016-0090-5. ieee: V. Grienitz, T. Tröster, and S. Meiners, “Technikevaluation für die generative Fertigung eines Serien-Radträgers,” ATZ - Automobiltechnische Zeitschrift, pp. 36–41, 2016. mla: Grienitz, Volker, et al. “Technikevaluation für die generative Fertigung eines Serien-Radträgers.” ATZ - Automobiltechnische Zeitschrift, 2016, pp. 36–41, doi:10.1007/s35148-016-0090-5. short: V. Grienitz, T. Tröster, S. Meiners, ATZ - Automobiltechnische Zeitschrift (2016) 36–41. date_created: 2020-02-27T16:05:23Z date_updated: 2022-01-06T06:52:44Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.1007/s35148-016-0090-5 language: - iso: ger page: 36-41 publication: ATZ - Automobiltechnische Zeitschrift publication_identifier: issn: - 0001-2785 - 2192-8800 publication_status: published status: public title: Technikevaluation für die generative Fertigung eines Serien-Radträgers type: journal_article user_id: '72008' year: '2016' ...