[{"year":"2023","issue":"1","quality_controlled":"1","title":"Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete","date_created":"2023-03-16T19:06:49Z","publisher":"Walter de Gruyter GmbH","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>The accessibility to rheological parameters for concrete is becoming more and more relevant. This is mainly related to the constantly emerging challenges, such as not only the development of high-strength concretes is progressing very fast but also the simulation of the flow behaviour is of high importance. The main problem, however, is that the rheological characterisation of fresh concrete is not possible via commercial rheometers. The so-called concrete rheometers provide valuable relative values for comparing different concretes, but they cannot measure absolute values. Therefore, we developed an adaptive coaxial concrete rheometer (ACCR) that allows the measurement of fresh concrete with particles up to <jats:inline-formula>\r\n                     <jats:alternatives>\r\n                        <jats:inline-graphic xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"graphic/j_arh-2022-0140_eq_001.png\" />\r\n                        <m:math xmlns:m=\"http://www.w3.org/1998/Math/MathML\">\r\n                           <m:msub>\r\n                              <m:mrow>\r\n                                 <m:mi>d</m:mi>\r\n                              </m:mrow>\r\n                              <m:mrow>\r\n                                 <m:mi mathvariant=\"normal\">max</m:mi>\r\n                              </m:mrow>\r\n                           </m:msub>\r\n                           <m:mo>=</m:mo>\r\n                           <m:mn>5.5</m:mn>\r\n                           <m:mspace width=\".5em\" />\r\n                           <m:mi mathvariant=\"normal\">mm</m:mi>\r\n                        </m:math>\r\n                        <jats:tex-math>{d}_{{\\rm{\\max }}}=5.5\\hspace{.5em}{\\rm{mm}}</jats:tex-math>\r\n                     </jats:alternatives>\r\n                  </jats:inline-formula>. The comparison of the ACCR with a commercial rheometer showed very good agreement for selected test materials (Newtonian fluid, shear thinning fluid, suspension, and yield stress fluid), so that self-compacting concrete was subsequently measured. Since these measurements showed a very high reproducibility, the rheological properties of the fresh concrete could be determined with high accuracy. The common flow models (Bingham (B), Herschel–Bulkley, modified Bingham (MB) models) were also tested for their applicability, with the Bingham and the modified Bingham model proving to be the best suitable ones.</jats:p>","lang":"eng"}],"publication":"Applied Rheology","language":[{"iso":"eng"}],"keyword":["Condensed Matter Physics","General Materials Science"],"citation":{"apa":"Josch, S., Jesinghausen, S., &#38; Schmid, H.-J. (2023). Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete. <i>Applied Rheology</i>, <i>33</i>(1). <a href=\"https://doi.org/10.1515/arh-2022-0140\">https://doi.org/10.1515/arh-2022-0140</a>","mla":"Josch, Sebastian, et al. “Development of an Adaptive Coaxial Concrete Rheometer and Rheological Characterisation of Fresh Concrete.” <i>Applied Rheology</i>, vol. 33, no. 1, Walter de Gruyter GmbH, 2023, doi:<a href=\"https://doi.org/10.1515/arh-2022-0140\">10.1515/arh-2022-0140</a>.","short":"S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).","bibtex":"@article{Josch_Jesinghausen_Schmid_2023, title={Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete}, volume={33}, DOI={<a href=\"https://doi.org/10.1515/arh-2022-0140\">10.1515/arh-2022-0140</a>}, number={1}, journal={Applied Rheology}, publisher={Walter de Gruyter GmbH}, author={Josch, Sebastian and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2023} }","chicago":"Josch, Sebastian, Steffen Jesinghausen, and Hans-Joachim Schmid. “Development of an Adaptive Coaxial Concrete Rheometer and Rheological Characterisation of Fresh Concrete.” <i>Applied Rheology</i> 33, no. 1 (2023). <a href=\"https://doi.org/10.1515/arh-2022-0140\">https://doi.org/10.1515/arh-2022-0140</a>.","ieee":"S. Josch, S. Jesinghausen, and H.-J. Schmid, “Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete,” <i>Applied Rheology</i>, vol. 33, no. 1, 2023, doi: <a href=\"https://doi.org/10.1515/arh-2022-0140\">10.1515/arh-2022-0140</a>.","ama":"Josch S, Jesinghausen S, Schmid H-J. Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete. <i>Applied Rheology</i>. 2023;33(1). doi:<a href=\"https://doi.org/10.1515/arh-2022-0140\">10.1515/arh-2022-0140</a>"},"intvolume":"        33","publication_status":"published","publication_identifier":{"issn":["1617-8106"]},"main_file_link":[{"url":"https://www.degruyter.com/document/doi/10.1515/arh-2022-0140/html","open_access":"1"}],"doi":"10.1515/arh-2022-0140","author":[{"full_name":"Josch, Sebastian","id":"38243","last_name":"Josch","first_name":"Sebastian"},{"full_name":"Jesinghausen, Steffen","id":"3959","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298","first_name":"Steffen"},{"full_name":"Schmid, Hans-Joachim","id":"464","orcid":"000-0001-8590-1921","last_name":"Schmid","first_name":"Hans-Joachim"}],"volume":33,"oa":"1","date_updated":"2023-04-27T11:19:08Z","status":"public","type":"journal_article","user_id":"3959","department":[{"_id":"150"}],"_id":"43034"},{"type":"journal_article","publication":"Powder Technology","status":"public","_id":"43128","user_id":"71545","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"}],"article_number":"118460","keyword":["General Chemical Engineering"],"language":[{"iso":"eng"}],"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0032-5910"]},"year":"2023","citation":{"mla":"Rüther, Moritz Johannes, et al. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.” <i>Powder Technology</i>, vol. 422, 118460, Elsevier BV, 2023, doi:<a href=\"https://doi.org/10.1016/j.powtec.2023.118460\">10.1016/j.powtec.2023.118460</a>.","bibtex":"@article{Rüther_Klippstein_Ponusamy_Rüther_Schmid_2023, title={Flowability of polymer powders at elevated temperatures for additive manufacturing}, volume={422}, DOI={<a href=\"https://doi.org/10.1016/j.powtec.2023.118460\">10.1016/j.powtec.2023.118460</a>}, number={118460}, journal={Powder Technology}, publisher={Elsevier BV}, author={Rüther, Moritz Johannes and Klippstein, Sven Helge and Ponusamy, SathishKumar and Rüther, Torben and Schmid, Hans-Joachim}, year={2023} }","short":"M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder Technology 422 (2023).","apa":"Rüther, M. J., Klippstein, S. H., Ponusamy, S., Rüther, T., &#38; Schmid, H.-J. (2023). Flowability of polymer powders at elevated temperatures for additive manufacturing. <i>Powder Technology</i>, <i>422</i>, Article 118460. <a href=\"https://doi.org/10.1016/j.powtec.2023.118460\">https://doi.org/10.1016/j.powtec.2023.118460</a>","ama":"Rüther MJ, Klippstein SH, Ponusamy S, Rüther T, Schmid H-J. Flowability of polymer powders at elevated temperatures for additive manufacturing. <i>Powder Technology</i>. 2023;422. doi:<a href=\"https://doi.org/10.1016/j.powtec.2023.118460\">10.1016/j.powtec.2023.118460</a>","ieee":"M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” <i>Powder Technology</i>, vol. 422, Art. no. 118460, 2023, doi: <a href=\"https://doi.org/10.1016/j.powtec.2023.118460\">10.1016/j.powtec.2023.118460</a>.","chicago":"Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy, Torben Rüther, and Hans-Joachim Schmid. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.” <i>Powder Technology</i> 422 (2023). <a href=\"https://doi.org/10.1016/j.powtec.2023.118460\">https://doi.org/10.1016/j.powtec.2023.118460</a>."},"intvolume":"       422","date_updated":"2023-04-27T12:33:28Z","publisher":"Elsevier BV","author":[{"id":"38188","full_name":"Rüther, Moritz Johannes","last_name":"Rüther","first_name":"Moritz Johannes"},{"first_name":"Sven Helge","id":"71545","full_name":"Klippstein, Sven Helge","last_name":"Klippstein"},{"full_name":"Ponusamy, SathishKumar","id":"77383","last_name":"Ponusamy","first_name":"SathishKumar"},{"first_name":"Torben","last_name":"Rüther","full_name":"Rüther, Torben","id":"76950"},{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim"}],"date_created":"2023-03-27T19:57:12Z","volume":422,"title":"Flowability of polymer powders at elevated temperatures for additive manufacturing","doi":"10.1016/j.powtec.2023.118460"},{"type":"conference_abstract","file":[{"relation":"main_file","content_type":"application/pdf","file_name":"MechPartRund_Ponusamy_ProcNet23.pdf","file_id":"44245","access_level":"closed","file_size":63115,"creator":"ponusamy","date_created":"2023-04-27T19:42:18Z","date_updated":"2023-04-27T19:47:17Z"}],"status":"public","_id":"44244","user_id":"77383","department":[{"_id":"150"}],"ddc":["620"],"file_date_updated":"2023-04-27T19:47:17Z","language":[{"iso":"eng"}],"has_accepted_license":"1","year":"2023","citation":{"ieee":"S. Ponusamy and H.-J. Schmid, “Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern,” presented at the Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik, Braunschweig, 2023.","chicago":"Ponusamy, SathishKumar, and Hans-Joachim Schmid. “Dynamisch-Mechanische Polymerpartikelverrundung Zur Verbesserung Der Fließfähigkeit Für Das Selektive Lasersintern,” 2023.","ama":"Ponusamy S, Schmid H-J. Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern. In: ; 2023.","mla":"Ponusamy, SathishKumar, and Hans-Joachim Schmid. <i>Dynamisch-Mechanische Polymerpartikelverrundung Zur Verbesserung Der Fließfähigkeit Für Das Selektive Lasersintern</i>. 2023.","short":"S. Ponusamy, H.-J. Schmid, in: 2023.","bibtex":"@inproceedings{Ponusamy_Schmid_2023, title={Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern}, author={Ponusamy, SathishKumar and Schmid, Hans-Joachim}, year={2023} }","apa":"Ponusamy, S., &#38; Schmid, H.-J. (2023). <i>Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern</i>. Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik, Braunschweig."},"date_updated":"2023-04-27T19:47:17Z","author":[{"first_name":"SathishKumar","last_name":"Ponusamy","full_name":"Ponusamy, SathishKumar","id":"77383"},{"id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","first_name":"Hans-Joachim"}],"date_created":"2023-04-27T19:44:07Z","title":"Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern","conference":{"start_date":"2023-03-21","name":"Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik","location":"Braunschweig","end_date":"2023-03-23"}},{"year":"2023","citation":{"mla":"Neukötter, Moritz, et al. <i>Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)</i>. 2023.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2023, title={Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2023} }","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2023). <i>Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)</i>. Annual Meeting of the German Rheological Society (DRG) , Berlin.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” 2023.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” presented at the Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation). In: ; 2023."},"date_updated":"2023-05-04T08:20:27Z","date_created":"2023-04-21T11:24:21Z","author":[{"last_name":"Neukötter","orcid":"0000-0001-9101-8828","id":"45530","full_name":"Neukötter, Moritz","first_name":"Moritz"},{"id":"3959","full_name":"Jesinghausen, Steffen","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298","first_name":"Steffen"},{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464"}],"title":"Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)","conference":{"location":"Berlin","end_date":"2023-09-22","start_date":"2023-09-21","name":"Annual Meeting of the German Rheological Society (DRG) "},"type":"conference_abstract","status":"public","_id":"44103","department":[{"_id":"9"},{"_id":"150"}],"user_id":"3959","language":[{"iso":"eng"}]},{"date_updated":"2023-05-12T06:47:18Z","supervisor":[{"first_name":"Moritz","id":"45530","full_name":"Neukötter, Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter"},{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim"},{"first_name":"Steffen","full_name":"Jesinghausen, Steffen","id":"3959","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298"}],"author":[{"last_name":"Temborius","full_name":"Temborius, Fiona","first_name":"Fiona"},{"first_name":"Moritz","last_name":"Neukötter","orcid":"0000-0001-9101-8828","id":"45530","full_name":"Neukötter, Moritz"}],"date_created":"2023-04-21T11:15:41Z","title":"Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln","year":"2023","citation":{"ama":"Temborius F, Neukötter M. <i>Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln</i>.; 2023.","chicago":"Temborius, Fiona, and Moritz Neukötter. <i>Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln</i>, 2023.","ieee":"F. Temborius and M. Neukötter, <i>Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln</i>. 2023.","mla":"Temborius, Fiona, and Moritz Neukötter. <i>Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln</i>. 2023.","bibtex":"@book{Temborius_Neukötter_2023, title={Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln}, author={Temborius, Fiona and Neukötter, Moritz}, year={2023} }","short":"F. Temborius, M. Neukötter, Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln, 2023.","apa":"Temborius, F., &#38; Neukötter, M. (2023). <i>Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln</i>."},"_id":"44101","department":[{"_id":"9"},{"_id":"150"}],"user_id":"45530","language":[{"iso":"ger"}],"type":"bachelorsthesis","status":"public"},{"title":"Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells","supervisor":[{"full_name":"Neukötter, Moritz","id":"45530","last_name":"Neukötter","orcid":"0000-0001-9101-8828","first_name":"Moritz"},{"first_name":"Hans-Joachim","id":"464","full_name":"Schmid, Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid"},{"orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","id":"3959","full_name":"Jesinghausen, Steffen","first_name":"Steffen"}],"author":[{"full_name":"Bünder, Dirk","last_name":"Bünder","first_name":"Dirk"},{"first_name":"Moritz","full_name":"Neukötter, Moritz","id":"45530","last_name":"Neukötter","orcid":"0000-0001-9101-8828"}],"date_created":"2023-03-14T08:52:57Z","date_updated":"2023-05-12T06:49:04Z","citation":{"short":"D. Bünder, M. Neukötter, Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells, 2023.","bibtex":"@book{Bünder_Neukötter_2023, title={Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells}, author={Bünder, Dirk and Neukötter, Moritz}, year={2023} }","mla":"Bünder, Dirk, and Moritz Neukötter. <i>Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells</i>. 2023.","apa":"Bünder, D., &#38; Neukötter, M. (2023). <i>Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells</i>.","ama":"Bünder D, Neukötter M. <i>Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells</i>.; 2023.","ieee":"D. Bünder and M. Neukötter, <i>Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells</i>. 2023.","chicago":"Bünder, Dirk, and Moritz Neukötter. <i>Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells</i>, 2023."},"year":"2023","language":[{"iso":"ger"}],"department":[{"_id":"9"},{"_id":"150"}],"user_id":"45530","_id":"42999","status":"public","type":"mastersthesis"},{"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2363-9512","2363-9520"]},"year":"2023","citation":{"apa":"Kletetzka, I., Kosanke, M., Meinderink, D., Neßlinger, V., Grundmeier, G., &#38; Schmid, H.-J. (2023). Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends. <i>Progress in Additive Manufacturing</i>. <a href=\"https://doi.org/10.1007/s40964-023-00501-z\">https://doi.org/10.1007/s40964-023-00501-z</a>","mla":"Kletetzka, Ivo, et al. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.” <i>Progress in Additive Manufacturing</i>, Springer Science and Business Media LLC, 2023, doi:<a href=\"https://doi.org/10.1007/s40964-023-00501-z\">10.1007/s40964-023-00501-z</a>.","bibtex":"@article{Kletetzka_Kosanke_Meinderink_Neßlinger_Grundmeier_Schmid_2023, title={Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends}, DOI={<a href=\"https://doi.org/10.1007/s40964-023-00501-z\">10.1007/s40964-023-00501-z</a>}, journal={Progress in Additive Manufacturing}, publisher={Springer Science and Business Media LLC}, author={Kletetzka, Ivo and Kosanke, Maren and Meinderink, Dennis and Neßlinger, Vanessa and Grundmeier, Guido and Schmid, Hans-Joachim}, year={2023} }","short":"I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, Progress in Additive Manufacturing (2023).","ama":"Kletetzka I, Kosanke M, Meinderink D, Neßlinger V, Grundmeier G, Schmid H-J. Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends. <i>Progress in Additive Manufacturing</i>. Published online 2023. doi:<a href=\"https://doi.org/10.1007/s40964-023-00501-z\">10.1007/s40964-023-00501-z</a>","chicago":"Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.” <i>Progress in Additive Manufacturing</i>, 2023. <a href=\"https://doi.org/10.1007/s40964-023-00501-z\">https://doi.org/10.1007/s40964-023-00501-z</a>.","ieee":"I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,” <i>Progress in Additive Manufacturing</i>, 2023, doi: <a href=\"https://doi.org/10.1007/s40964-023-00501-z\">10.1007/s40964-023-00501-z</a>."},"date_updated":"2023-09-07T11:51:01Z","oa":"1","publisher":"Springer Science and Business Media LLC","date_created":"2023-09-06T06:49:38Z","author":[{"full_name":"Kletetzka, Ivo","id":"50769","last_name":"Kletetzka","first_name":"Ivo"},{"first_name":"Maren","full_name":"Kosanke, Maren","last_name":"Kosanke"},{"first_name":"Dennis","last_name":"Meinderink","full_name":"Meinderink, Dennis"},{"last_name":"Neßlinger","full_name":"Neßlinger, Vanessa","first_name":"Vanessa"},{"first_name":"Guido","last_name":"Grundmeier","id":"194","full_name":"Grundmeier, Guido"},{"first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim","id":"464","last_name":"Schmid","orcid":"000-0001-8590-1921"}],"title":"Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends","main_file_link":[{"open_access":"1","url":"https://rdcu.be/dlqzG"}],"doi":"10.1007/s40964-023-00501-z","type":"journal_article","publication":"Progress in Additive Manufacturing","abstract":[{"lang":"eng","text":"In this work, the influence of the filler–matrix adhesion on the tensile properties of laser-sintered parts built with Polyamide 613 filled with glass beads was investigated. For this purpose, dry blends of glass beads with and without organosilane coupling agents and polyamide powder were prepared and processed into tensile specimens on an EOS P396 laser sintering system. The samples were tested both in the dry state and after an accelerated conditioning in a climate chamber. Furthermore, finite element method (FEM) simulations were performed to model the extreme cases of optimum adhesion and no adhesion. By correlating the tensile tests with the simulation results and by analyzing the fracture surfaces, it was shown that the filler–matrix adhesion is sufficient in the dry state but is strongly degraded by conditioning. Even the presence of various organosilane thin films could not prevent a strong deterioration of the filler–matrix adhesion and the associated deterioration of the mechanical properties. Since a comparison with an injection-molded sample of the same polymer filler combination shows identical behavior after conditioning, it is assumed that this problem is not limited to additively manufactured parts."}],"status":"public","_id":"46815","user_id":"50769","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"keyword":["Industrial and Manufacturing Engineering"],"language":[{"iso":"eng"}]},{"main_file_link":[{"open_access":"1","url":"https://www.researchsquare.com/article/rs-2664324/v1"}],"title":"Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends","date_created":"2023-03-20T09:13:23Z","author":[{"last_name":"Kletetzka","full_name":"Kletetzka, Ivo","first_name":"Ivo"},{"first_name":"Maren","last_name":"Kosanke","full_name":"Kosanke, Maren"},{"last_name":"Meinderink","full_name":"Meinderink, Dennis","first_name":"Dennis"},{"first_name":"Vanessa","full_name":"Neßlinger, Vanessa","last_name":"Neßlinger"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido"},{"full_name":"Schmid, Hans-Joachim","last_name":"Schmid","first_name":"Hans-Joachim"}],"publisher":"Research Square Platform LLC","date_updated":"2023-09-07T11:52:39Z","oa":"1","citation":{"ama":"Kletetzka I, Kosanke M, Meinderink D, Neßlinger V, Grundmeier G, Schmid H-J. Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends. Published online 2023.","ieee":"I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends.” Research Square Platform LLC, 2023.","chicago":"Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser Sintered Parts Built with Polyamide Glass Bead Dry Blends.” Research Square Platform LLC, 2023.","apa":"Kletetzka, I., Kosanke, M., Meinderink, D., Neßlinger, V., Grundmeier, G., &#38; Schmid, H.-J. (2023). <i>Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends</i>. Research Square Platform LLC.","mla":"Kletetzka, Ivo, et al. <i>Influence of the Filler Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser Sintered Parts Built with Polyamide Glass Bead Dry Blends</i>. Research Square Platform LLC, 2023.","short":"I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, (2023).","bibtex":"@article{Kletetzka_Kosanke_Meinderink_Neßlinger_Grundmeier_Schmid_2023, title={Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends}, publisher={Research Square Platform LLC}, author={Kletetzka, Ivo and Kosanke, Maren and Meinderink, Dennis and Neßlinger, Vanessa and Grundmeier, Guido and Schmid, Hans-Joachim}, year={2023} }"},"year":"2023","publication_status":"published","language":[{"iso":"eng"}],"department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"user_id":"50769","_id":"43049","status":"public","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n        <jats:p>In this work, the influence of the filler matrix adhesion on the tensile properties of laser-sintered parts built with Polyamide 613 filled with glass beads was investigated. For this purpose, dry blends of glass beads with and without organosilane coupling agents and polyamide powder were prepared and processed into tensile specimens on an EOS P396. The samples were tested both in the dry state and after an accelerated conditioning in a climate chamber. Furthermore, FEM simulations were performed to model the limiting cases of optimum adhesion and no adhesion. By correlating the tensile tests with the simulation results and by analyzing the fracture surfaces, it was shown that the filler matrix adhesion is sufficient in the dry state but is strongly degraded by conditioning. Even the presence of various organosilane thin films could not prevent a strong deterioration of the filler-matrix adhesion and the associated deterioration of the mechanical properties. Since a comparison with an injection molded sample of the same polymer filler combination shows identical behavior after conditioning, it is assumed that this problem is not limited to additively manufactured parts.</jats:p>","lang":"eng"}],"type":"preprint"},{"conference":{"end_date":"2023-05-31","location":"Berlin","name":"Mobility goes Additve","start_date":"2023-05-31"},"title":"Tensile Testing for Polymer AM - Best Pratice at the DMRC","date_created":"2023-06-27T08:32:16Z","author":[{"first_name":"Ivo","last_name":"Kletetzka","id":"50769","full_name":"Kletetzka, Ivo"}],"date_updated":"2023-09-07T11:52:08Z","citation":{"chicago":"Kletetzka, Ivo. “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” 2023.","ieee":"I. Kletetzka, “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” presented at the Mobility goes Additve, Berlin, 2023.","ama":"Kletetzka I. Tensile Testing for Polymer AM - Best Pratice at the DMRC. In: ; 2023.","apa":"Kletetzka, I. (2023). <i>Tensile Testing for Polymer AM - Best Pratice at the DMRC</i>. Mobility goes Additve, Berlin.","mla":"Kletetzka, Ivo. <i>Tensile Testing for Polymer AM - Best Pratice at the DMRC</i>. 2023.","short":"I. Kletetzka, in: 2023.","bibtex":"@inproceedings{Kletetzka_2023, title={Tensile Testing for Polymer AM - Best Pratice at the DMRC}, author={Kletetzka, Ivo}, year={2023} }"},"year":"2023","publication_status":"published","language":[{"iso":"eng"}],"user_id":"50769","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"_id":"45783","status":"public","type":"conference_abstract"},{"date_created":"2023-03-18T14:28:46Z","author":[{"first_name":"Sven Helge","last_name":"Klippstein","full_name":"Klippstein, Sven Helge","id":"71545"},{"first_name":"Ivo","last_name":"Kletetzka","full_name":"Kletetzka, Ivo","id":"50769"},{"first_name":"Ilknur","last_name":"Sural","full_name":"Sural, Ilknur"},{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim"}],"date_updated":"2023-09-07T11:57:59Z","oa":"1","publisher":"Springer","main_file_link":[{"url":"https://link.springer.com/article/10.1007/s00170-023-11243-1","open_access":"1"}],"doi":"https://doi.org/10.1007/s00170-023-11243-1","title":"Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties","publication_status":"published","quality_controlled":"1","citation":{"ieee":"S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” <i>The International Journal of Advanced Manufacturing Technology </i>, 2023, doi: <a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>.","chicago":"Klippstein, Sven Helge, Ivo Kletetzka, Ilknur Sural, and Hans-Joachim Schmid. “Influence of a Prolonged Shelf Time on PA12 Laser Sintering Powder and Resulting Part Properties.” <i>The International Journal of Advanced Manufacturing Technology </i>, 2023. <a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>.","ama":"Klippstein SH, Kletetzka I, Sural I, Schmid H-J. Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties. <i>The International Journal of Advanced Manufacturing Technology </i>. Published online 2023. doi:<a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>","mla":"Klippstein, Sven Helge, et al. “Influence of a Prolonged Shelf Time on PA12 Laser Sintering Powder and Resulting Part Properties.” <i>The International Journal of Advanced Manufacturing Technology </i>, Springer, 2023, doi:<a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>.","bibtex":"@article{Klippstein_Kletetzka_Sural_Schmid_2023, title={Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties}, DOI={<a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>}, journal={The International Journal of Advanced Manufacturing Technology }, publisher={Springer}, author={Klippstein, Sven Helge and Kletetzka, Ivo and Sural, Ilknur and Schmid, Hans-Joachim}, year={2023} }","short":"S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology  (2023).","apa":"Klippstein, S. H., Kletetzka, I., Sural, I., &#38; Schmid, H.-J. (2023). Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties. <i>The International Journal of Advanced Manufacturing Technology </i>. <a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>"},"year":"2023","user_id":"50769","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"_id":"43046","language":[{"iso":"eng"}],"keyword":["Selective laser sintering","Shelf life","Polyamide 12","powder","PA2200","material ageing"],"type":"journal_article","publication":"The International Journal of Advanced Manufacturing Technology ","status":"public","abstract":[{"lang":"eng","text":"In the laser sintering technology, the semi-crystalline polymer material is exposed to elevated temperatures during processing, which leads to serious material ageing for most materials. This has already been investigated intensively by various authors. However, the ageing of the material at ambient temperatures during shelf life has not been the focus so far. The need to analyse the shelf life can be derived from an ecological and economic point of view. This work is focusing on the shelf life of PA2200 (PA12). To reduce the potential influences of powder production fluctuations, two different powder batches stored for 5.5 years and 6.5 years are investigated and compared to a reference powder produced 0.5 years before these investigations. Multiple powder analyses and part characterisations have been performed. A significant yellowing and molecular chain length reduction can be derived from the measurement results. Whereas the influence on mechanical part performance was minor, the parts built with the stored powders are more yellowish. As it is most likely that this is due to the consumption of polyamide stabilisers, it can be assumed that these parts will be subject to significantly faster ageing. Therefore, it is still not recommended to use the stored powders for critical parts or light intense and humid environments."}]},{"type":"bachelorsthesis","status":"public","user_id":"72307","department":[{"_id":"150"},{"_id":"219"},{"_id":"624"},{"_id":"9"}],"_id":"46861","language":[{"iso":"ger"}],"citation":{"ama":"Sajadi S. <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>.; 2023.","chicago":"Sajadi, Said. <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>, 2023.","ieee":"S. Sajadi, <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>. 2023.","short":"S. Sajadi, Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess, 2023.","bibtex":"@book{Sajadi_2023, title={Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess}, author={Sajadi, Said}, year={2023} }","mla":"Sajadi, Said. <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>. 2023.","apa":"Sajadi, S. (2023). <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>."},"year":"2023","author":[{"first_name":"Said","last_name":"Sajadi","full_name":"Sajadi, Said"}],"supervisor":[{"id":"464","full_name":"Schmid, Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","first_name":"Hans-Joachim"},{"first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","id":"3959","full_name":"Jesinghausen, Steffen"},{"first_name":"Fabian","full_name":"Neitzel, Fabian","id":"72307","orcid":"0009-0004-8412-3645 ","last_name":"Neitzel"}],"date_created":"2023-09-07T11:57:48Z","date_updated":"2023-09-07T12:02:38Z","title":"Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess"},{"language":[{"iso":"eng"}],"user_id":"48411","department":[{"_id":"9"},{"_id":"158"},{"_id":"150"}],"_id":"46870","status":"public","editor":[{"first_name":"Illona","last_name":"Horwath","full_name":"Horwath, Illona"},{"last_name":"Schweizer","full_name":"Schweizer, Swetlana","first_name":"Swetlana"}],"type":"book_chapter","publication":"Climate Protection, Resource Efficiency, and Sustainable Engineering","doi":"10.14361/9783839463772-007","title":"Case Study IV: Individualized Medical Technology using Additive Manufacturing","date_created":"2023-09-08T08:28:27Z","author":[{"first_name":"Dennis","full_name":"Menge, Dennis","id":"29240","last_name":"Menge"},{"first_name":"Dennis","full_name":"Milaege, Dennis","last_name":"Milaege"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464","full_name":"Schmid, Hans-Joachim"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"date_updated":"2023-09-08T08:32:42Z","publisher":"transcript Verlag","citation":{"bibtex":"@inbook{Menge_Milaege_Hoyer_Schmid_Schaper_2023, place={Bielefeld, Germany}, title={Case Study IV: Individualized Medical Technology using Additive Manufacturing}, DOI={<a href=\"https://doi.org/10.14361/9783839463772-007\">10.14361/9783839463772-007</a>}, booktitle={Climate Protection, Resource Efficiency, and Sustainable Engineering}, publisher={transcript Verlag}, author={Menge, Dennis and Milaege, Dennis and Hoyer, Kay-Peter and Schmid, Hans-Joachim and Schaper, Mirko}, editor={Horwath, Illona and Schweizer, Swetlana}, year={2023} }","short":"D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, M. Schaper, in: I. Horwath, S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.","mla":"Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:<a href=\"https://doi.org/10.14361/9783839463772-007\">10.14361/9783839463772-007</a>.","apa":"Menge, D., Milaege, D., Hoyer, K.-P., Schmid, H.-J., &#38; Schaper, M. (2023). Case Study IV: Individualized Medical Technology using Additive Manufacturing. In I. Horwath &#38; S. Schweizer (Eds.), <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>. transcript Verlag. <a href=\"https://doi.org/10.14361/9783839463772-007\">https://doi.org/10.14361/9783839463772-007</a>","ieee":"D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.","chicago":"Menge, Dennis, Dennis Milaege, Kay-Peter Hoyer, Hans-Joachim Schmid, and Mirko Schaper. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” In <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>, edited by Illona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript Verlag, 2023. <a href=\"https://doi.org/10.14361/9783839463772-007\">https://doi.org/10.14361/9783839463772-007</a>.","ama":"Menge D, Milaege D, Hoyer K-P, Schmid H-J, Schaper M. Case Study IV: Individualized Medical Technology using Additive Manufacturing. In: Horwath I, Schweizer S, eds. <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>. transcript Verlag; 2023. doi:<a href=\"https://doi.org/10.14361/9783839463772-007\">10.14361/9783839463772-007</a>"},"place":"Bielefeld, Germany","year":"2023","publication_status":"published","publication_identifier":{"issn":["2703-1543","2703-1551"],"isbn":["9783837663778","9783839463772"]}},{"title":"Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen ","supervisor":[{"id":"45530","full_name":"Neukötter, Moritz","last_name":"Neukötter","orcid":"0000-0001-9101-8828","first_name":"Moritz"},{"first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim","id":"464","last_name":"Schmid","orcid":"000-0001-8590-1921"},{"first_name":"Steffen","id":"3959","full_name":"Jesinghausen, Steffen","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298"}],"date_created":"2023-03-14T08:51:10Z","author":[{"first_name":"Ahmad","last_name":"Almohammad","full_name":"Almohammad, Ahmad"},{"first_name":"Moritz","full_name":"Neukötter, Moritz","id":"45530","orcid":"0000-0001-9101-8828","last_name":"Neukötter"}],"date_updated":"2024-11-08T09:15:40Z","citation":{"apa":"Almohammad, A., &#38; Neukötter, M. (2023). <i>Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen </i>.","bibtex":"@book{Almohammad_Neukötter_2023, title={Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen }, author={Almohammad, Ahmad and Neukötter, Moritz}, year={2023} }","mla":"Almohammad, Ahmad, and Moritz Neukötter. <i>Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen </i>. 2023.","short":"A. Almohammad, M. Neukötter, Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen , 2023.","ieee":"A. Almohammad and M. Neukötter, <i>Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen </i>. 2023.","chicago":"Almohammad, Ahmad, and Moritz Neukötter. <i>Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen </i>, 2023.","ama":"Almohammad A, Neukötter M. <i>Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen </i>.; 2023."},"year":"2023","language":[{"iso":"ger"}],"user_id":"45530","department":[{"_id":"9"},{"_id":"150"}],"_id":"42997","status":"public","type":"mastersthesis"},{"type":"bachelorsthesis","status":"public","user_id":"45530","department":[{"_id":"9"},{"_id":"150"}],"_id":"56951","language":[{"iso":"ger"}],"citation":{"ama":"Otto M, Neukötter M. <i>Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer</i>.; 2023.","chicago":"Otto, Moritz, and Moritz Neukötter. <i>Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer</i>, 2023.","ieee":"M. Otto and M. Neukötter, <i>Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer</i>. 2023.","apa":"Otto, M., &#38; Neukötter, M. (2023). <i>Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer</i>.","bibtex":"@book{Otto_Neukötter_2023, title={Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer}, author={Otto, Moritz and Neukötter, Moritz}, year={2023} }","mla":"Otto, Moritz, and Moritz Neukötter. <i>Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer</i>. 2023.","short":"M. Otto, M. Neukötter, Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer, 2023."},"year":"2023","supervisor":[{"first_name":"Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter","full_name":"Neukötter, Moritz","id":"45530"},{"last_name":"Schmid","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"},{"first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","id":"3959","full_name":"Jesinghausen, Steffen"}],"author":[{"first_name":"Moritz","full_name":"Otto, Moritz","last_name":"Otto"},{"last_name":"Neukötter","orcid":"0000-0001-9101-8828","full_name":"Neukötter, Moritz","id":"45530","first_name":"Moritz"}],"date_created":"2024-11-08T08:52:12Z","date_updated":"2024-11-08T09:16:01Z","title":"Konstruktion einer Vorrichtung zur Probenherstellung für das Sermanat-Dehnrheometer"},{"status":"public","type":"mastersthesis","language":[{"iso":"ger"}],"_id":"56953","user_id":"45530","department":[{"_id":"9"},{"_id":"150"}],"year":"2023","citation":{"apa":"Gunasagran, S. K., &#38; Neukötter, M. (2023). <i>Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit)</i>.","short":"S.K. Gunasagran, M. Neukötter, Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit), 2023.","mla":"Gunasagran, Sharin Kumar, and Moritz Neukötter. <i>Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit)</i>. 2023.","bibtex":"@book{Gunasagran_Neukötter_2023, title={Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit)}, author={Gunasagran, Sharin Kumar and Neukötter, Moritz}, year={2023} }","ama":"Gunasagran SK, Neukötter M. <i>Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit)</i>.; 2023.","chicago":"Gunasagran, Sharin Kumar, and Moritz Neukötter. <i>Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit)</i>, 2023.","ieee":"S. K. Gunasagran and M. Neukötter, <i>Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit)</i>. 2023."},"title":"Automatisierung der Auswertungen rheologischer Messungen (Studienarbeit)","date_updated":"2024-11-08T09:15:52Z","date_created":"2024-11-08T08:57:11Z","author":[{"last_name":"Gunasagran","full_name":"Gunasagran, Sharin Kumar","first_name":"Sharin Kumar"},{"last_name":"Neukötter","orcid":"0000-0001-9101-8828","full_name":"Neukötter, Moritz","id":"45530","first_name":"Moritz"}],"supervisor":[{"first_name":"Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter","id":"45530","full_name":"Neukötter, Moritz"},{"first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","full_name":"Jesinghausen, Steffen","id":"3959"},{"first_name":"Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","id":"464"}]},{"title":"Evaluation of self-built low-budget particle sensors (Study Project)","supervisor":[{"full_name":"Neukötter, Moritz","id":"45530","last_name":"Neukötter","orcid":"0000-0001-9101-8828","first_name":"Moritz"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"author":[{"first_name":"Mohamed","last_name":"Al Mamoun","full_name":"Al Mamoun, Mohamed"},{"first_name":"Moritz","id":"45530","full_name":"Neukötter, Moritz","last_name":"Neukötter","orcid":"0000-0001-9101-8828"}],"date_created":"2023-03-14T08:48:07Z","date_updated":"2024-11-08T09:12:31Z","citation":{"ieee":"M. Al Mamoun and M. Neukötter, <i>Evaluation of self-built low-budget particle sensors (Study Project)</i>. 2023.","chicago":"Al Mamoun, Mohamed, and Moritz Neukötter. <i>Evaluation of Self-Built Low-Budget Particle Sensors (Study Project)</i>, 2023.","ama":"Al Mamoun M, Neukötter M. <i>Evaluation of Self-Built Low-Budget Particle Sensors (Study Project)</i>.; 2023.","apa":"Al Mamoun, M., &#38; Neukötter, M. (2023). <i>Evaluation of self-built low-budget particle sensors (Study Project)</i>.","mla":"Al Mamoun, Mohamed, and Moritz Neukötter. <i>Evaluation of Self-Built Low-Budget Particle Sensors (Study Project)</i>. 2023.","short":"M. Al Mamoun, M. Neukötter, Evaluation of Self-Built Low-Budget Particle Sensors (Study Project), 2023.","bibtex":"@book{Al Mamoun_Neukötter_2023, title={Evaluation of self-built low-budget particle sensors (Study Project)}, author={Al Mamoun, Mohamed and Neukötter, Moritz}, year={2023} }"},"year":"2023","language":[{"iso":"eng"}],"user_id":"45530","department":[{"_id":"9"},{"_id":"150"}],"_id":"42995","status":"public","type":"mastersthesis"},{"status":"public","type":"conference_abstract","language":[{"iso":"eng"}],"department":[{"_id":"9"},{"_id":"150"}],"user_id":"45530","_id":"44102","citation":{"ama":"Neukötter M, Jesinghausen S, Schmid H-J. Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster). In: ; 2023.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” presented at the International Congress on Rheology, Athens, 2023.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” 2023.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2023, title={Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2023} }","mla":"Neukötter, Moritz, et al. <i>Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)</i>. 2023.","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2023). <i>Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)</i>. International Congress on Rheology, Athens."},"year":"2023","conference":{"start_date":"2023-07-29","name":"International Congress on Rheology","location":"Athens","end_date":"2023-08-04"},"title":"Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster)","date_created":"2023-04-21T11:21:10Z","author":[{"first_name":"Moritz","full_name":"Neukötter, Moritz","id":"45530","orcid":"0000-0001-9101-8828","last_name":"Neukötter"},{"first_name":"Steffen","full_name":"Jesinghausen, Steffen","id":"3959","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298"},{"first_name":"Hans-Joachim","id":"464","full_name":"Schmid, Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid"}],"date_updated":"2024-11-08T09:18:24Z"},{"language":[{"iso":"ger"}],"department":[{"_id":"300"},{"_id":"34"},{"_id":"150"},{"_id":"9"}],"user_id":"65001","_id":"54632","status":"public","publication":"die hochschullehre","type":"journal_article","doi":"10.3278/HSL2310W","main_file_link":[{"open_access":"1","url":"https://www.wbv.de/shop/Entwicklung-eines-neuen-Konzeptes-zur-Vermittlung-von-Lerntechniken-und-Selbstlernkompetenzen-fuer-Studierende-des-Maschinenbaus-an-der-Universitaet-Paderborn-HSL2310W"}],"title":"Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn","author":[{"first_name":"Leon Alexander","last_name":"Bentrup","full_name":"Bentrup, Leon Alexander","id":"65001"},{"first_name":"Melanie ","last_name":"Gräßer","full_name":"Gräßer, Melanie "},{"last_name":"Temmen","full_name":"Temmen, Katrin","id":"30086","first_name":"Katrin"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464","full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim"}],"date_created":"2024-06-06T09:52:30Z","publisher":"wbv Publikation","date_updated":"2025-01-13T09:06:55Z","oa":"1","citation":{"short":"L.A. Bentrup, M. Gräßer, K. Temmen, H.-J. Schmid, die hochschullehre (2023).","mla":"Bentrup, Leon Alexander, et al. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” <i>die hochschullehre</i>, no. 9, wbv Publikation, 2023, doi:<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>.","bibtex":"@article{Bentrup_Gräßer_Temmen_Schmid_2023, title={Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn}, DOI={<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>}, number={9}, journal={die hochschullehre}, publisher={wbv Publikation}, author={Bentrup, Leon Alexander and Gräßer, Melanie  and Temmen, Katrin and Schmid, Hans-Joachim}, year={2023} }","apa":"Bentrup, L. A., Gräßer, M., Temmen, K., &#38; Schmid, H.-J. (2023). Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn. <i>die hochschullehre</i>, <i>9</i>. <a href=\"https://doi.org/10.3278/HSL2310W\">https://doi.org/10.3278/HSL2310W</a>","chicago":"Bentrup, Leon Alexander, Melanie  Gräßer, Katrin Temmen, and Hans-Joachim Schmid. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” <i>die hochschullehre</i>, no. 9 (2023). <a href=\"https://doi.org/10.3278/HSL2310W\">https://doi.org/10.3278/HSL2310W</a>.","ieee":"L. A. Bentrup, M. Gräßer, K. Temmen, and H.-J. Schmid, “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn,” <i>die hochschullehre</i>, no. 9, 2023, doi: <a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>.","ama":"Bentrup LA, Gräßer M, Temmen K, Schmid H-J. Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn. <i>die hochschullehre</i>. 2023;(9). doi:<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>"},"year":"2023","issue":"9","publication_status":"published"},{"citation":{"ieee":"J. Beimdiek and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system,” presented at the International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.","chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System.” Düsseldorf: VDI Verlag, 2023.","ama":"Beimdiek J, Schmid H-J. Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system. In: VDI Verlag; 2023.","bibtex":"@inproceedings{Beimdiek_Schmid_2023, place={Düsseldorf}, title={Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system}, publisher={VDI Verlag}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2023} }","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System</i>. VDI Verlag, 2023.","short":"J. Beimdiek, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.","apa":"Beimdiek, J., &#38; Schmid, H.-J. (2023). <i>Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system</i>. International Congress on Particle Technology | PARTEC 2023, Nürnberg."},"place":"Düsseldorf","year":"2023","has_accepted_license":"1","conference":{"end_date":"2023-09-28","location":"Nürnberg","name":"International Congress on Particle Technology | PARTEC 2023","start_date":"2023-09-26"},"title":"Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system","author":[{"last_name":"Beimdiek","orcid":"0009-0001-1348-496X","id":"45788","full_name":"Beimdiek, Janis","first_name":"Janis"},{"id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","first_name":"Hans-Joachim"}],"date_created":"2024-02-21T16:28:49Z","publisher":"VDI Verlag","date_updated":"2025-09-18T08:53:29Z","status":"public","file":[{"content_type":"application/pdf","success":1,"relation":"main_file","date_updated":"2024-02-21T16:27:47Z","creator":"jludwig","date_created":"2024-02-21T16:27:47Z","file_size":130920,"access_level":"closed","file_id":"51728","file_name":"Extended Abstract_PARTEC.pdf"}],"type":"conference","file_date_updated":"2024-02-21T16:27:47Z","language":[{"iso":"eng"}],"ddc":["660"],"department":[{"_id":"9"},{"_id":"150"}],"user_id":"45788","_id":"51727"},{"has_accepted_license":"1","place":"Paderborn","year":"2023","citation":{"apa":"Beimdiek, J., &#38; Schmid, H.-J. (2023). <i>Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)</i>. Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn.","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)</i>. 2023.","bibtex":"@inproceedings{Beimdiek_Schmid_2023, place={Paderborn}, title={Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2023} }","short":"J. Beimdiek, H.-J. Schmid, in: Paderborn, 2023.","ieee":"J. Beimdiek and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),” presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn, 2023.","chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster).” Paderborn, 2023.","ama":"Beimdiek J, Schmid H-J. Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster). In: ; 2023."},"date_updated":"2025-09-18T08:49:17Z","date_created":"2024-02-21T16:18:17Z","author":[{"first_name":"Janis","last_name":"Beimdiek","orcid":"0009-0001-1348-496X","id":"45788","full_name":"Beimdiek, Janis"},{"id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","first_name":"Hans-Joachim"}],"title":"Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)","conference":{"end_date":"2023-03-29","location":"Paderborn","name":"Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023","start_date":"2023-03-28"},"type":"conference_abstract","file":[{"date_updated":"2024-02-21T16:30:16Z","date_created":"2024-02-21T16:30:16Z","creator":"jludwig","file_size":803920,"access_level":"closed","file_id":"51729","file_name":"Poster_Gasreinigung.pdf","content_type":"application/pdf","success":1,"relation":"main_file"}],"status":"public","_id":"51726","user_id":"45788","department":[{"_id":"9"},{"_id":"150"}],"ddc":["660"],"language":[{"iso":"ger"}],"file_date_updated":"2024-02-21T16:30:16Z"}]