[{"publication":"19th Int. Conference on Metal Forming 2022","type":"conference","status":"public","department":[{"_id":"153"},{"_id":"241"},{"_id":"156"}],"user_id":"36287","_id":"34003","language":[{"iso":"eng"}],"quality_controlled":"1","citation":{"ama":"Arian B, Oesterwinter A, Homberg W, et al. A flow forming process model to predict workpiece properties in AISI 304L. In: <i>19th Int. Conference on Metal Forming 2022</i>. ; 2022.","ieee":"B. Arian <i>et al.</i>, “A flow forming process model to predict workpiece properties in AISI 304L,” 2022.","chicago":"Arian, Bahman, Annika Oesterwinter, Werner Homberg, Julian Rozo Vasquez, Frank Walther, Lukas Kersting, and Ansgar Trächtler. “A Flow Forming Process Model to Predict Workpiece Properties in AISI 304L.” In <i>19th Int. Conference on Metal Forming 2022</i>, 2022.","apa":"Arian, B., Oesterwinter, A., Homberg, W., Rozo Vasquez, J., Walther, F., Kersting, L., &#38; Trächtler, A. (2022). A flow forming process model to predict workpiece properties in AISI 304L. <i>19th Int. Conference on Metal Forming 2022</i>.","bibtex":"@inproceedings{Arian_Oesterwinter_Homberg_Rozo Vasquez_Walther_Kersting_Trächtler_2022, title={A flow forming process model to predict workpiece properties in AISI 304L}, booktitle={19th Int. Conference on Metal Forming 2022}, author={Arian, Bahman and Oesterwinter, Annika and Homberg, Werner and Rozo Vasquez, Julian and Walther, Frank and Kersting, Lukas and Trächtler, Ansgar}, year={2022} }","short":"B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting, A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.","mla":"Arian, Bahman, et al. “A Flow Forming Process Model to Predict Workpiece Properties in AISI 304L.” <i>19th Int. Conference on Metal Forming 2022</i>, 2022."},"year":"2022","author":[{"last_name":"Arian","full_name":"Arian, Bahman","id":"36287","first_name":"Bahman"},{"first_name":"Annika","last_name":"Oesterwinter","id":"44917","full_name":"Oesterwinter, Annika"},{"first_name":"Werner","id":"233","full_name":"Homberg, Werner","last_name":"Homberg"},{"last_name":"Rozo Vasquez","full_name":"Rozo Vasquez, Julian","first_name":"Julian"},{"full_name":"Walther, Frank","last_name":"Walther","first_name":"Frank"},{"first_name":"Lukas","full_name":"Kersting, Lukas","last_name":"Kersting"},{"first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler"}],"date_created":"2022-11-04T09:02:27Z","oa":"1","date_updated":"2023-12-15T09:38:57Z","main_file_link":[{"open_access":"1"}],"title":"A flow forming process model to predict workpiece properties in AISI 304L"},{"year":"2022","citation":{"apa":"Vieth, P., Borgert, T., Homberg, W., &#38; Grundmeier, G. (2022). Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants. <i>Advanced Engineering Materials</i>. <a href=\"https://doi.org/10.1002/adem.202201081\">https://doi.org/10.1002/adem.202201081</a>","short":"P. Vieth, T. Borgert, W. Homberg, G. Grundmeier, Advanced Engineering Materials (2022).","mla":"Vieth, Pascal, et al. “Assessment of Mechanical and Optical Properties of Al 6060 Alloy Particles by Removal of Contaminants.” <i>Advanced Engineering Materials</i>, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>.","bibtex":"@article{Vieth_Borgert_Homberg_Grundmeier_2022, title={Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants}, DOI={<a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Vieth, Pascal and Borgert, Thomas and Homberg, Werner and Grundmeier, Guido}, year={2022} }","ama":"Vieth P, Borgert T, Homberg W, Grundmeier G. Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants. <i>Advanced Engineering Materials</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>","chicago":"Vieth, Pascal, Thomas Borgert, Werner Homberg, and Guido Grundmeier. “Assessment of Mechanical and Optical Properties of Al 6060 Alloy Particles by Removal of Contaminants.” <i>Advanced Engineering Materials</i>, 2022. <a href=\"https://doi.org/10.1002/adem.202201081\">https://doi.org/10.1002/adem.202201081</a>.","ieee":"P. Vieth, T. Borgert, W. Homberg, and G. Grundmeier, “Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants,” <i>Advanced Engineering Materials</i>, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>."},"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["1438-1656","1527-2648"]},"title":"Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants","doi":"10.1002/adem.202201081","publisher":"Wiley","date_updated":"2023-04-26T13:26:02Z","date_created":"2022-10-14T08:10:07Z","author":[{"full_name":"Vieth, Pascal","last_name":"Vieth","first_name":"Pascal"},{"full_name":"Borgert, Thomas","id":"83141","last_name":"Borgert","first_name":"Thomas"},{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"},{"first_name":"Guido","id":"194","full_name":"Grundmeier, Guido","last_name":"Grundmeier"}],"status":"public","type":"journal_article","publication":"Advanced Engineering Materials","keyword":["Condensed Matter Physics","General Materials Science"],"language":[{"iso":"eng"}],"_id":"33724","user_id":"83141","department":[{"_id":"156"}]},{"language":[{"iso":"eng"}],"article_number":"100113","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"user_id":"66459","department":[{"_id":"157"},{"_id":"156"},{"_id":"9"}],"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"},{"name":"TRR 285 – A04: TRR 285 - Subproject A04","_id":"138"},{"_id":"137","name":"TRR 285 – A03: TRR 285 - Subproject A03"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"140","name":"TRR 285 – B01: TRR 285 - Subproject B01"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"},{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"},{"_id":"148","name":"TRR 285 – C04: TRR 285 - Subproject C04"}],"_id":"34216","status":"public","abstract":[{"text":"Mechanical joining technologies are increasingly used in multi-material lightweight constructions and offer opportunities to create versatile joining processes due to their low heat input, robustness to metallurgical incompatibilities and various process variants. They can be categorised into technologies which require an auxiliary joining element, or do not require an auxiliary joining element. A typical example for a mechanical joining process with auxiliary joining element is self-piercing riveting. A wide range of processes exist which are not requiring an auxiliary joining element. This allows both point-shaped (e.g., by clinching) and line-shaped (e.g., friction stir welding) joints to be produced. In order to achieve versatile processes, challenges exist in particular in the creation of intervention possibilities in the process and the understanding and handling of materials that are difficult to join, such as fiber reinforced plastics (FRP) or high-strength metals. In addition, predictive capability is required, which in particular requires accurate process simulation. Finally, the processes must be measured non-destructively in order to generate control variables in the process or to investigate the cause-effect relationship. This paper covers the state of the art in scientific research concerning mechanical joining and discusses future challenges on the way to versatile mechanical joining processes.","lang":"eng"}],"type":"journal_article","publication":"Journal of Advanced Joining Processes","doi":"10.1016/j.jajp.2022.100113","title":"Review on mechanical joining by plastic deformation","author":[{"orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056","first_name":"Gerson"},{"full_name":"Merklein, M.","last_name":"Merklein","first_name":"M."},{"first_name":"A.","full_name":"Brosius, A.","last_name":"Brosius"},{"first_name":"D.","full_name":"Drummer, D.","last_name":"Drummer"},{"full_name":"Fratini, L.","last_name":"Fratini","first_name":"L."},{"first_name":"U.","full_name":"Füssel, U.","last_name":"Füssel"},{"full_name":"Gude, M.","last_name":"Gude","first_name":"M."},{"full_name":"Homberg, Werner","id":"233","last_name":"Homberg","first_name":"Werner"},{"first_name":"P.A.F.","last_name":"Martins","full_name":"Martins, P.A.F."},{"id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias"},{"first_name":"M.","last_name":"Lechner","full_name":"Lechner, M."},{"full_name":"Kupfer, R.","last_name":"Kupfer","first_name":"R."},{"full_name":"Gröger, B.","last_name":"Gröger","first_name":"B."},{"first_name":"Daxin","full_name":"Han, Daxin","id":"36544","last_name":"Han"},{"first_name":"J.","full_name":"Kalich, J.","last_name":"Kalich"},{"id":"66459","full_name":"Kappe, Fabian","last_name":"Kappe","first_name":"Fabian"},{"last_name":"Kleffel","full_name":"Kleffel, T.","first_name":"T."},{"full_name":"Köhler, D.","last_name":"Köhler","first_name":"D."},{"first_name":"C.-M.","full_name":"Kuball, C.-M.","last_name":"Kuball"},{"last_name":"Popp","full_name":"Popp, J.","first_name":"J."},{"last_name":"Römisch","full_name":"Römisch, D.","first_name":"D."},{"last_name":"Troschitz","full_name":"Troschitz, J.","first_name":"J."},{"first_name":"Christian","full_name":"Wischer, Christian","id":"72219","last_name":"Wischer"},{"first_name":"S.","full_name":"Wituschek, S.","last_name":"Wituschek"},{"last_name":"Wolf","full_name":"Wolf, M.","first_name":"M."}],"date_created":"2022-12-05T21:24:49Z","volume":5,"date_updated":"2023-04-27T08:52:38Z","publisher":"Elsevier BV","citation":{"short":"G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).","bibtex":"@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et al._2022, title={Review on mechanical joining by plastic deformation}, volume={5}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2022.100113\">10.1016/j.jajp.2022.100113</a>}, number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Meschut, Gerson and Merklein, M. and Brosius, A. and Drummer, D. and Fratini, L. and Füssel, U. and Gude, M. and Homberg, Werner and Martins, P.A.F. and Bobbert, Mathias and et al.}, year={2022} }","mla":"Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.” <i>Journal of Advanced Joining Processes</i>, vol. 5, 100113, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100113\">10.1016/j.jajp.2022.100113</a>.","apa":"Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U., Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R., Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M., … Wolf, M. (2022). Review on mechanical joining by plastic deformation. <i>Journal of Advanced Joining Processes</i>, <i>5</i>, Article 100113. <a href=\"https://doi.org/10.1016/j.jajp.2022.100113\">https://doi.org/10.1016/j.jajp.2022.100113</a>","ama":"Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. <i>Journal of Advanced Joining Processes</i>. 2022;5. doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100113\">10.1016/j.jajp.2022.100113</a>","ieee":"G. Meschut <i>et al.</i>, “Review on mechanical joining by plastic deformation,” <i>Journal of Advanced Joining Processes</i>, vol. 5, Art. no. 100113, 2022, doi: <a href=\"https://doi.org/10.1016/j.jajp.2022.100113\">10.1016/j.jajp.2022.100113</a>.","chicago":"Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” <i>Journal of Advanced Joining Processes</i> 5 (2022). <a href=\"https://doi.org/10.1016/j.jajp.2022.100113\">https://doi.org/10.1016/j.jajp.2022.100113</a>."},"intvolume":"         5","year":"2022","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2666-3309"]}},{"citation":{"ama":"Borgert T, Homberg W. Energy saving potentials of an efficient recycling process of different aluminum rejects. <i>Energy Reports</i>. 2022;8:399-404. doi:<a href=\"https://doi.org/10.1016/j.egyr.2022.01.027\">10.1016/j.egyr.2022.01.027</a>","ieee":"T. Borgert and W. Homberg, “Energy saving potentials of an efficient recycling process of different aluminum rejects,” <i>Energy Reports</i>, vol. 8, pp. 399–404, 2022, doi: <a href=\"https://doi.org/10.1016/j.egyr.2022.01.027\">10.1016/j.egyr.2022.01.027</a>.","chicago":"Borgert, Thomas, and Werner Homberg. “Energy Saving Potentials of an Efficient Recycling Process of Different Aluminum Rejects.” <i>Energy Reports</i> 8 (2022): 399–404. <a href=\"https://doi.org/10.1016/j.egyr.2022.01.027\">https://doi.org/10.1016/j.egyr.2022.01.027</a>.","apa":"Borgert, T., &#38; Homberg, W. (2022). Energy saving potentials of an efficient recycling process of different aluminum rejects. <i>Energy Reports</i>, <i>8</i>, 399–404. <a href=\"https://doi.org/10.1016/j.egyr.2022.01.027\">https://doi.org/10.1016/j.egyr.2022.01.027</a>","bibtex":"@article{Borgert_Homberg_2022, title={Energy saving potentials of an efficient recycling process of different aluminum rejects}, volume={8}, DOI={<a href=\"https://doi.org/10.1016/j.egyr.2022.01.027\">10.1016/j.egyr.2022.01.027</a>}, journal={Energy Reports}, publisher={Elsevier BV}, author={Borgert, Thomas and Homberg, Werner}, year={2022}, pages={399–404} }","mla":"Borgert, Thomas, and Werner Homberg. “Energy Saving Potentials of an Efficient Recycling Process of Different Aluminum Rejects.” <i>Energy Reports</i>, vol. 8, Elsevier BV, 2022, pp. 399–404, doi:<a href=\"https://doi.org/10.1016/j.egyr.2022.01.027\">10.1016/j.egyr.2022.01.027</a>.","short":"T. Borgert, W. Homberg, Energy Reports 8 (2022) 399–404."},"intvolume":"         8","page":"399-404","publication_status":"published","publication_identifier":{"issn":["2352-4847"]},"doi":"10.1016/j.egyr.2022.01.027","conference":{"end_date":"17.09.2021","name":"The 8th International Conference on Energy and Environment Research ICEER 2021","start_date":"13.09.2021"},"date_updated":"2023-04-27T09:07:15Z","author":[{"first_name":"Thomas","id":"83141","full_name":"Borgert, Thomas","last_name":"Borgert"},{"first_name":"Werner","full_name":"Homberg, Werner","last_name":"Homberg"}],"volume":8,"status":"public","type":"journal_article","article_type":"original","_id":"29719","user_id":"83141","department":[{"_id":"156"}],"year":"2022","quality_controlled":"1","title":"Energy saving potentials of an efficient recycling process of different aluminum rejects","publisher":"Elsevier BV","date_created":"2022-02-02T07:48:01Z","publication":"Energy Reports","keyword":["General Energy"],"language":[{"iso":"eng"}]},{"place":"Braga - Portugal","year":"2022","citation":{"apa":"Engemann, D., &#38; Homberg, W. (n.d.). <i>Hot Spinning of Cutting Blades for Food Industry</i>. Esaform 2022, Braga - Portugal.","short":"D. Engemann, W. Homberg, in: Braga - Portugal, n.d.","mla":"Engemann, David, and Werner Homberg. <i>Hot Spinning of Cutting Blades for Food Industry</i>.","bibtex":"@inproceedings{Engemann_Homberg, place={Braga - Portugal}, title={Hot Spinning of Cutting Blades for Food Industry}, author={Engemann, David and Homberg, Werner} }","ama":"Engemann D, Homberg W. Hot Spinning of Cutting Blades for Food Industry.","ieee":"D. Engemann and W. Homberg, “Hot Spinning of Cutting Blades for Food Industry,” presented at the Esaform 2022, Braga - Portugal.","chicago":"Engemann, David, and Werner Homberg. “Hot Spinning of Cutting Blades for Food Industry.” Braga - Portugal, n.d."},"publication_status":"accepted","quality_controlled":"1","has_accepted_license":"1","title":"Hot Spinning of Cutting Blades for Food Industry","conference":{"start_date":"26.04.2022","name":"Esaform 2022","location":"Braga - Portugal","end_date":"29.04.2022"},"date_updated":"2023-04-27T09:39:21Z","date_created":"2022-03-14T07:22:43Z","author":[{"last_name":"Engemann","full_name":"Engemann, David","id":"51720","first_name":"David"},{"full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"}],"abstract":[{"lang":"eng","text":"The spinning process is a flexible incremental forming process for the manufacturing of axially-symmetric sheet metal or tubular components with functionally graded properties. It is characterized by the utilization of universal tooling geometries and quite low forming forces. The process has a high potential to reduce material waste, to extend the forming limits and to achieve more complex geometries as well as favorable part properties [1]. Current research work at the Chair of Forming Technology (LUF) is focused on innovative flow-turning processes that have a high potential for producing flat components with excellent geometrical and mechanical properties while keeping process times short [2]. In combination with process-integrated local heat treatment, the new spinning process is predestined for the efficient forming of ultra-high-strength steel or tailored materials. Due to the desired field of food industry only food-safe materials such as special stainless steels are being investigated. This paper presents an innovative machine layout as well as an adequate process design for the production of high-performance circular knives with optimized mechanical hardness. In this context, particular attention is paid to various areas of temperature control as well as process-related challenges during the process."}],"file":[{"file_size":785105,"access_level":"closed","file_id":"30293","file_name":"PaperSuperSharp_Revision.pdf","date_updated":"2022-03-14T07:19:21Z","date_created":"2022-03-14T07:19:21Z","creator":"davideng","success":1,"relation":"main_file","content_type":"application/pdf"}],"status":"public","type":"conference","ddc":["680"],"keyword":["Cutting blades","Flow-forming","Incremental forming","Hot Forming","High strength steels"],"language":[{"iso":"eng"}],"file_date_updated":"2022-03-14T07:19:21Z","_id":"30292","user_id":"83141","department":[{"_id":"156"}]},{"type":"journal_article","status":"public","department":[{"_id":"9"},{"_id":"156"},{"_id":"630"}],"user_id":"83141","_id":"31360","project":[{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"},{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"}],"article_number":"869","publication_identifier":{"issn":["2075-4701"]},"publication_status":"published","intvolume":"        12","citation":{"ama":"Oesterwinter A, Wischer C, Homberg W. Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC). <i>Metals</i>. 2022;12(5). doi:<a href=\"https://doi.org/10.3390/met12050869\">10.3390/met12050869</a>","ieee":"A. Oesterwinter, C. Wischer, and W. Homberg, “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC),” <i>Metals</i>, vol. 12, no. 5, Art. no. 869, 2022, doi: <a href=\"https://doi.org/10.3390/met12050869\">10.3390/met12050869</a>.","chicago":"Oesterwinter, Annika, Christian Wischer, and Werner Homberg. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).” <i>Metals</i> 12, no. 5 (2022). <a href=\"https://doi.org/10.3390/met12050869\">https://doi.org/10.3390/met12050869</a>.","apa":"Oesterwinter, A., Wischer, C., &#38; Homberg, W. (2022). Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC). <i>Metals</i>, <i>12</i>(5), Article 869. <a href=\"https://doi.org/10.3390/met12050869\">https://doi.org/10.3390/met12050869</a>","short":"A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).","bibtex":"@article{Oesterwinter_Wischer_Homberg_2022, title={Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/met12050869\">10.3390/met12050869</a>}, number={5869}, journal={Metals}, publisher={MDPI AG}, author={Oesterwinter, Annika and Wischer, Christian and Homberg, Werner}, year={2022} }","mla":"Oesterwinter, Annika, et al. “Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).” <i>Metals</i>, vol. 12, no. 5, 869, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/met12050869\">10.3390/met12050869</a>."},"volume":12,"author":[{"first_name":"Annika","last_name":"Oesterwinter","id":"44917","full_name":"Oesterwinter, Annika"},{"id":"72219","full_name":"Wischer, Christian","last_name":"Wischer","first_name":"Christian"},{"last_name":"Homberg","full_name":"Homberg, Werner","first_name":"Werner"}],"date_updated":"2023-04-27T09:39:39Z","doi":"10.3390/met12050869","publication":"Metals","abstract":[{"lang":"eng","text":"<jats:p>The adaptive joining process employing friction-spun joint connectors (FSJC) is a promising method for the realization of adaptable joints and thus for lightweight construction. In addition to experimental investigations, numerical studies are indispensable tools for its development. Therefore, this paper includes an analysis of boundary conditions for the spatial discretization and mesh modeling techniques, the material modeling, the contact and friction modeling, and the thermal boundary conditions for the finite element (FE) modeling of this joining process. For these investigations, two FE models corresponding to the two process steps were set up and compared with the two related processes of friction stir welding and friction drilling. Regarding the spatial discretization, the Lagrangian approach is not sufficient to represent the deformation that occurs. The Johnson-Cook model is well suited as a material model. The modeling of the contact detection and friction are important research subjects. Coulomb’s law of friction is not adequate to account for the complex friction phenomena of the adaptive joining process. The thermal boundary conditions play a decisive role in heat generation and thus in the material flow of the process. It is advisable to use temperature-dependent parameters and to investigate in detail the influence of radiation in the entire process.</jats:p>"}],"language":[{"iso":"eng"}],"keyword":["General Materials Science","Metals and Alloys"],"issue":"5","quality_controlled":"1","year":"2022","date_created":"2022-05-21T17:27:16Z","publisher":"MDPI AG","title":"Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)"},{"publication":"Key Engineering Materials","abstract":[{"text":"Mechanical joining processes are an essential part of modern lightweight construction. They permit materials of different types to be joined in a way that is suitable for the loads involved. These processes reach their limits, however, as soon as the boundary conditions change. In most cases, these elements are specially adapted to the joining point and cannot be used universally. Changes require cost-intensive adaptation of both the element and the process control, thus making production more complex. This results in high costs due to the increased number of auxiliary joining element variants required and reduces the economic efficiency of mechanical joining. One approach to overcoming this issue is the use of adaptive auxiliary joining elements formed by friction spinning. This article presents the current state of research on pre-hole-free joining with adaptive joining elements. The overall process chain is illustrated, explained and analyzed. Special attention is paid to demonstrating the feasibility of pre-hole-free joining with adaptive joining elements. The chosen mechanical parameters are subsequently listed. Finally, a comprehensive outlook of the future development potential is derived.</jats:p>","lang":"eng"}],"language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"quality_controlled":"1","year":"2022","date_created":"2023-01-20T07:47:18Z","publisher":"Trans Tech Publications, Ltd.","title":"Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints","type":"journal_article","status":"public","user_id":"83141","department":[{"_id":"156"}],"project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"}],"_id":"37647","article_type":"original","publication_status":"published","publication_identifier":{"issn":["1662-9795"]},"citation":{"ieee":"C. Wischer and W. Homberg, “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints,” <i>Key Engineering Materials</i>, vol. 926, pp. 1468–1478, 2022, doi: <a href=\"https://doi.org/10.4028/p-1n6741\">10.4028/p-1n6741</a>.","chicago":"Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.” <i>Key Engineering Materials</i> 926 (2022): 1468–78. <a href=\"https://doi.org/10.4028/p-1n6741\">https://doi.org/10.4028/p-1n6741</a>.","ama":"Wischer C, Homberg W. Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints. <i>Key Engineering Materials</i>. 2022;926:1468-1478. doi:<a href=\"https://doi.org/10.4028/p-1n6741\">10.4028/p-1n6741</a>","bibtex":"@article{Wischer_Homberg_2022, title={Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints}, volume={926}, DOI={<a href=\"https://doi.org/10.4028/p-1n6741\">10.4028/p-1n6741</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Wischer, Christian and Homberg, Werner}, year={2022}, pages={1468–1478} }","mla":"Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.” <i>Key Engineering Materials</i>, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1468–78, doi:<a href=\"https://doi.org/10.4028/p-1n6741\">10.4028/p-1n6741</a>.","short":"C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.","apa":"Wischer, C., &#38; Homberg, W. (2022). Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints. <i>Key Engineering Materials</i>, <i>926</i>, 1468–1478. <a href=\"https://doi.org/10.4028/p-1n6741\">https://doi.org/10.4028/p-1n6741</a>"},"page":"1468-1478","intvolume":"       926","author":[{"first_name":"Christian","full_name":"Wischer, Christian","last_name":"Wischer"},{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"}],"volume":926,"date_updated":"2023-04-27T09:40:52Z","doi":"10.4028/p-1n6741"},{"quality_controlled":"1","publication_identifier":{"issn":["2075-4701"]},"issue":"4","year":"2022","intvolume":"        12","citation":{"ama":"Heggemann T, Psyk V, Oesterwinter A, Linnemann M, Kräusel V, Homberg W. Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology. <i>Metals</i>. 2022;12(4). doi:<a href=\"https://doi.org/10.3390/met12040660\">10.3390/met12040660</a>","chicago":"Heggemann, Thomas, Verena Psyk, Annika Oesterwinter, Maik Linnemann, Verena Kräusel, and Werner Homberg. “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology.” <i>Metals</i> 12, no. 4 (2022). <a href=\"https://doi.org/10.3390/met12040660\">https://doi.org/10.3390/met12040660</a>.","ieee":"T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, and W. Homberg, “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology,” <i>Metals</i>, vol. 12, no. 4, 2022, doi: <a href=\"https://doi.org/10.3390/met12040660\">10.3390/met12040660</a>.","apa":"Heggemann, T., Psyk, V., Oesterwinter, A., Linnemann, M., Kräusel, V., &#38; Homberg, W. (2022). Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology. <i>Metals</i>, <i>12</i>(4). <a href=\"https://doi.org/10.3390/met12040660\">https://doi.org/10.3390/met12040660</a>","mla":"Heggemann, Thomas, et al. “Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology.” <i>Metals</i>, vol. 12, no. 4, 2022, doi:<a href=\"https://doi.org/10.3390/met12040660\">10.3390/met12040660</a>.","bibtex":"@article{Heggemann_Psyk_Oesterwinter_Linnemann_Kräusel_Homberg_2022, title={Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/met12040660\">10.3390/met12040660</a>}, number={4}, journal={Metals}, author={Heggemann, Thomas and Psyk, Verena and Oesterwinter, Annika and Linnemann, Maik and Kräusel, Verena and Homberg, Werner}, year={2022} }","short":"T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, W. Homberg, Metals 12 (2022)."},"date_updated":"2023-04-27T09:39:58Z","volume":12,"date_created":"2022-04-13T09:06:11Z","author":[{"first_name":"Thomas","id":"9360","full_name":"Heggemann, Thomas","last_name":"Heggemann"},{"first_name":"Verena","full_name":"Psyk, Verena","last_name":"Psyk"},{"id":"44917","full_name":"Oesterwinter, Annika","last_name":"Oesterwinter","first_name":"Annika"},{"full_name":"Linnemann, Maik","last_name":"Linnemann","first_name":"Maik"},{"last_name":"Kräusel","full_name":"Kräusel, Verena","first_name":"Verena"},{"last_name":"Homberg","full_name":"Homberg, Werner","first_name":"Werner"}],"title":"Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology","doi":"10.3390/met12040660","publication":"Metals","type":"journal_article","abstract":[{"lang":"eng","text":"High-speed forming processes such as electromagnetic forming (EMF) and electrohydraulic forming (EHF) have a high potential for producing lightweight components with complex geometries, but the forming zone is usually limited to a small size for equipment-related reasons. Incremental strategies overcome this limit by using a sequence of local deformations to form larger component areas gradually. Hence, the technological potential of high-speed forming can be exploited for large-area components too. The target-oriented process design of such incremental forming operations requires a deep understanding of the underlying electromagnetic and electrohydraulic forming processes. This article therefore analyzes and compares the influence of fundamental process parameters on the acting loads, the resulting course of deformation, and the forming result for both technologies via experimental and numerical investigations. Specifically, it is shown that for the EHF process considered, the electrode distance and the discharge energy have a significant influence on the resulting forming depth. In the EHF process, the largest forming depth is achieved directly below the electrodes, while the pressure distribution in the EMF depends on the fieldshaper used. The energy requirement for the EHF process is comparatively low, while significantly higher forming speeds are achieved with the EMF process."}],"status":"public","_id":"30885","department":[{"_id":"9"},{"_id":"156"}],"user_id":"83141","language":[{"iso":"eng"}]},{"_id":"42813","user_id":"15324","department":[{"_id":"156"}],"language":[{"iso":"ger"}],"type":"dissertation","status":"public","date_updated":"2023-03-07T09:31:06Z","author":[{"last_name":"Wiens","full_name":"Wiens, Eugen","first_name":"Eugen"}],"date_created":"2023-03-07T09:30:56Z","title":"Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften","publication_identifier":{"isbn":["978-3-8440-8408-5"]},"year":"2022","citation":{"short":"E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften, 2022.","bibtex":"@book{Wiens_2022, title={Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften}, author={Wiens, Eugen}, year={2022} }","mla":"Wiens, Eugen. <i>Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften</i>. 2022.","apa":"Wiens, E. (2022). <i>Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften</i>.","ama":"Wiens E. <i>Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften</i>.; 2022.","chicago":"Wiens, Eugen. <i>Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften</i>, 2022.","ieee":"E. Wiens, <i>Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften</i>. 2022."}},{"abstract":[{"text":"<jats:p>Friction-spinning as an innovative incremental forming process enables large degrees of deformation in the field of tube and sheet metal forming due to a self-induced heat generation in the forming zone. This paper presents a new tool and process design with a driven tool for the targeted adjustment of residual stress distributions in the friction-spinning process. Locally adapted residual stress depth distributions are intended to improve the functionality of the friction-spinning workpieces, e.g. by delaying failure or triggering it in a defined way. The new process designs with the driven tool and a subsequent flow-forming operation are investigated regarding the influence on the residual stress depth distributions compared to those of standard friction-spinning process. Residual stress depth distributions are measured with the incremental hole-drilling method. The workpieces (tubular part with a flange) are manufactured using heat-treatable 3.3206 (EN-AW 6060 T6) tubular profiles. It is shown that the residual stress depth distributions change significantly due to the new process designs, which offers new potentials for the targeted adjustment of residual stresses that serve to improve the workpiece properties.</jats:p>","lang":"eng"}],"publication":"Key Engineering Materials","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"language":[{"iso":"eng"}],"year":"2022","quality_controlled":"1","title":"Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming","publisher":"Trans Tech Publications, Ltd.","date_created":"2022-07-25T08:32:43Z","status":"public","type":"journal_article","_id":"32412","user_id":"64977","department":[{"_id":"156"}],"citation":{"ama":"Dahms F, Homberg W. Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming. <i>Key Engineering Materials</i>. 2022;926:683-689. doi:<a href=\"https://doi.org/10.4028/p-3rk19y\">10.4028/p-3rk19y</a>","chicago":"Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.” <i>Key Engineering Materials</i> 926 (2022): 683–89. <a href=\"https://doi.org/10.4028/p-3rk19y\">https://doi.org/10.4028/p-3rk19y</a>.","ieee":"F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming,” <i>Key Engineering Materials</i>, vol. 926, pp. 683–689, 2022, doi: <a href=\"https://doi.org/10.4028/p-3rk19y\">10.4028/p-3rk19y</a>.","bibtex":"@article{Dahms_Homberg_2022, title={Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming}, volume={926}, DOI={<a href=\"https://doi.org/10.4028/p-3rk19y\">10.4028/p-3rk19y</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Dahms, Frederik and Homberg, Werner}, year={2022}, pages={683–689} }","short":"F. Dahms, W. Homberg, Key Engineering Materials 926 (2022) 683–689.","mla":"Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming.” <i>Key Engineering Materials</i>, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 683–89, doi:<a href=\"https://doi.org/10.4028/p-3rk19y\">10.4028/p-3rk19y</a>.","apa":"Dahms, F., &#38; Homberg, W. (2022). Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming. <i>Key Engineering Materials</i>, <i>926</i>, 683–689. <a href=\"https://doi.org/10.4028/p-3rk19y\">https://doi.org/10.4028/p-3rk19y</a>"},"intvolume":"       926","page":"683-689","publication_status":"published","publication_identifier":{"issn":["1662-9795"]},"conference":{"location":"Braga, Portugal","end_date":"29 April 2022","start_date":"27 April 2022","name":"25th International Conference on Material Forming (ESAFORM 2022)"},"doi":"10.4028/p-3rk19y","date_updated":"2023-04-27T10:30:38Z","author":[{"first_name":"Frederik","full_name":"Dahms, Frederik","id":"64977","last_name":"Dahms"},{"first_name":"Werner","id":"233","full_name":"Homberg, Werner","last_name":"Homberg"}],"volume":926},{"language":[{"iso":"eng"}],"keyword":["General Materials Science","Metals and Alloys"],"publication":"Metals","abstract":[{"text":"<jats:p>Friction-spinning as an innovative incremental forming process enables high degrees of deformation in the field of tube and sheet metal forming due to self-induced heat generation in the forming area. The complex thermomechanical conditions generate non-uniform residual stress distributions. In order to specifically adjust these residual stress distributions, the influence of different process parameters on residual stress distributions in flanges formed by the friction-spinning of tubes is investigated using the design of experiments (DoE) method. The feed rate with an effect of −156 MPa/mm is the dominating control parameter for residual stress depth distribution in steel flange forming, whereas the rotation speed of the workpiece with an effect of 18 MPa/mm dominates the gradient of residual stress generation in the aluminium flange-forming process. A run-to-run predictive control system for the specific adjustment of residual stress distributions is proposed and validated. The predictive model provides an initial solution in the form of a parameter set, and the controlled feedback iteratively approaches the target value with new parameter sets recalculated on the basis of the deviation of the previous run. Residual stress measurements are carried out using the hole-drilling method and X-ray diffraction by the cosα-method.</jats:p>","lang":"eng"}],"date_created":"2022-01-17T08:21:04Z","publisher":"MDPI AG","title":"Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control","issue":"1","quality_controlled":"1","year":"2022","department":[{"_id":"156"}],"user_id":"64977","_id":"29357","article_number":"158","type":"journal_article","status":"public","volume":12,"author":[{"id":"64977","full_name":"Dahms, Frederik","last_name":"Dahms","first_name":"Frederik"},{"first_name":"Werner","last_name":"Homberg","id":"233","full_name":"Homberg, Werner"}],"date_updated":"2023-04-27T10:30:32Z","doi":"10.3390/met12010158","publication_identifier":{"issn":["2075-4701"]},"publication_status":"published","intvolume":"        12","citation":{"apa":"Dahms, F., &#38; Homberg, W. (2022). Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control. <i>Metals</i>, <i>12</i>(1), Article 158. <a href=\"https://doi.org/10.3390/met12010158\">https://doi.org/10.3390/met12010158</a>","short":"F. Dahms, W. Homberg, Metals 12 (2022).","mla":"Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.” <i>Metals</i>, vol. 12, no. 1, 158, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/met12010158\">10.3390/met12010158</a>.","bibtex":"@article{Dahms_Homberg_2022, title={Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/met12010158\">10.3390/met12010158</a>}, number={1158}, journal={Metals}, publisher={MDPI AG}, author={Dahms, Frederik and Homberg, Werner}, year={2022} }","ieee":"F. Dahms and W. Homberg, “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control,” <i>Metals</i>, vol. 12, no. 1, Art. no. 158, 2022, doi: <a href=\"https://doi.org/10.3390/met12010158\">10.3390/met12010158</a>.","chicago":"Dahms, Frederik, and Werner Homberg. “Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control.” <i>Metals</i> 12, no. 1 (2022). <a href=\"https://doi.org/10.3390/met12010158\">https://doi.org/10.3390/met12010158</a>.","ama":"Dahms F, Homberg W. Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control. <i>Metals</i>. 2022;12(1). doi:<a href=\"https://doi.org/10.3390/met12010158\">10.3390/met12010158</a>"}},{"date_updated":"2023-04-27T12:06:58Z","author":[{"first_name":"Lukas","full_name":"Bathelt, Lukas","last_name":"Bathelt"},{"last_name":"Bader","id":"65204","full_name":"Bader, Fabian","first_name":"Fabian"},{"first_name":"Eugen","last_name":"Djakow","full_name":"Djakow, Eugen","id":"7904"},{"full_name":"Henke, Christian","last_name":"Henke","first_name":"Christian"},{"last_name":"Trächtler","id":"552","full_name":"Trächtler, Ansgar","first_name":"Ansgar"},{"last_name":"Homberg","full_name":"Homberg, Werner","first_name":"Werner"}],"date_created":"2022-03-11T11:03:06Z","title":"Innovative assistance system for setting up a mechatronic straightening machine","doi":"https://doi.org/10.4028/p-vs07w9","conference":{"name":"ESAFORM 2022","start_date":"2022-04-26","end_date":"2022-04-29","location":"Braga / Portugal"},"quality_controlled":"1","year":"2022","citation":{"apa":"Bathelt, L., Bader, F., Djakow, E., Henke, C., Trächtler, A., &#38; Homberg, W. (2022). <i>Innovative assistance system for setting up a mechatronic straightening machine</i>. ESAFORM 2022, Braga / Portugal. <a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>","mla":"Bathelt, Lukas, et al. <i>Innovative Assistance System for Setting up a Mechatronic Straightening Machine</i>. 2022, doi:<a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>.","short":"L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: 2022.","bibtex":"@inproceedings{Bathelt_Bader_Djakow_Henke_Trächtler_Homberg_2022, title={Innovative assistance system for setting up a mechatronic straightening machine}, DOI={<a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>}, author={Bathelt, Lukas and Bader, Fabian and Djakow, Eugen and Henke, Christian and Trächtler, Ansgar and Homberg, Werner}, year={2022} }","ama":"Bathelt L, Bader F, Djakow E, Henke C, Trächtler A, Homberg W. Innovative assistance system for setting up a mechatronic straightening machine. In: ; 2022. doi:<a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>","ieee":"L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, and W. Homberg, “Innovative assistance system for setting up a mechatronic straightening machine,” presented at the ESAFORM 2022, Braga / Portugal, 2022, doi: <a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>.","chicago":"Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Innovative Assistance System for Setting up a Mechatronic Straightening Machine,” 2022. <a href=\"https://doi.org/10.4028/p-vs07w9\">https://doi.org/10.4028/p-vs07w9</a>."},"_id":"30263","user_id":"552","department":[{"_id":"241"},{"_id":"156"},{"_id":"153"}],"language":[{"iso":"eng"}],"type":"conference","abstract":[{"lang":"eng","text":"High-strength wire materials are usually available as strip material which is further processed in a forming process (e.g. punch-bending). For storage and transport of the semi-finished wire to the customer, the material is wound onto coils. The manufacturing and coiling process introduces plastic deformations into the wire, which lead to undesirable residual stresses and wire curvature of the semi-finished product. These residual stresses and curvatures cause variations in the material properties of the semi-finished product, which have a negative impact on the subsequent product quality. Straightening machines are used to compensate the residual stresses and the curvature in the wire. At the beginning of the straightening process, the straightening machines must be set up in such a way that residual stresses and curvatures are optimally compensated. This setup process is usually a manual and iterative process, where a lot of material is wasted until the optimal settings for the straightening machine are found.In order to reduce the amount of material waste, the operator must be supported in the setup process. In this context, a new and innovative setup assistance system was developed to support the operator during the setup process. The setup assistant system automatically detects the wire curvature by means of an optical measuring system. Based on the optically detected measuring points, the wire curvature is determined by a robust calculation algorithm. Based on a database built up through the carried out experimental and numerical research work, the optimum setting parameters for the straightening machine are suggested to the operator without lengthy trial and error. After confirmation by the operator, the roller settings are automatically adjusted by the mechatronic straightening machine. With the presented method, the conventional iterative setup procedure can be made more resource-efficient and a high straightening quality can be reproducibly achieved. "}],"status":"public"},{"_id":"30265","user_id":"552","department":[{"_id":"156"},{"_id":"241"},{"_id":"153"}],"language":[{"iso":"eng"}],"type":"conference","abstract":[{"text":"Due to increasing globalization and rising quality requirements, the steel and metal processing industry is facing growing cost and innovation pressure. Not least because of their high lightweight potential, high-strength steel materials are meeting the growing material requirements of steel and metal processing in areas such as aerospace and medical technology. In particular, the tight tolerance limits of applicable shape and dimensional accuracies pose a challenge in the processing of high-strength steel strip materials. Improving the processability of high-strength steel materials through the use of straighteners with set-up assistance systems significantly increases the potential for competing with other materials such as aluminum or magnesium alloys. ","lang":"eng"}],"status":"public","date_updated":"2023-04-27T12:06:39Z","date_created":"2022-03-11T11:08:06Z","author":[{"last_name":"Bader","id":"65204","full_name":"Bader, Fabian","first_name":"Fabian"},{"full_name":"Bathelt, Lukas","last_name":"Bathelt","first_name":"Lukas"},{"last_name":"Djakow","id":"7904","full_name":"Djakow, Eugen","first_name":"Eugen"},{"full_name":"Henke, Christian","last_name":"Henke","first_name":"Christian"},{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"},{"full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler","first_name":"Ansgar"}],"title":"An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation","doi":"https://doi.org/10.4028/p-87wvu0","conference":{"start_date":"2022-04-26","name":"ESAFORM 2022","location":"Braga / Portugal","end_date":"2022-04-29"},"quality_controlled":"1","year":"2022","citation":{"ama":"Bader F, Bathelt L, Djakow E, Henke C, Homberg W, Trächtler A. An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation. In: ; 2022. doi:<a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>","ieee":"F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, and A. Trächtler, “An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation,” presented at the ESAFORM 2022, Braga / Portugal, 2022, doi: <a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>.","chicago":"Bader, Fabian, Lukas Bathelt, Eugen Djakow, Christian Henke, Werner Homberg, and Ansgar Trächtler. “An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation,” 2022. <a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>.","short":"F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in: 2022.","bibtex":"@inproceedings{Bader_Bathelt_Djakow_Henke_Homberg_Trächtler_2022, title={An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation}, DOI={<a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>}, author={Bader, Fabian and Bathelt, Lukas and Djakow, Eugen and Henke, Christian and Homberg, Werner and Trächtler, Ansgar}, year={2022} }","mla":"Bader, Fabian, et al. <i>An Approach for an Innovative 3d Steel Strip Straightening Machine for Curvature and Saber Compensation</i>. 2022, doi:<a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>.","apa":"Bader, F., Bathelt, L., Djakow, E., Henke, C., Homberg, W., &#38; Trächtler, A. (2022). <i>An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation</i>. ESAFORM 2022, Braga / Portugal. <a href=\"https://doi.org/10.4028/p-87wvu0\">https://doi.org/10.4028/p-87wvu0</a>"}},{"publication_status":"published","publication_identifier":{"issn":["2195-8599","0032-678X"]},"citation":{"short":"J. Rozo Vasquez, H. Kanagarajah, B. Arian, L. Kersting, W. Homberg, A. Trächtler, F. Walther, Practical Metallography 59 (2022) 660–675.","mla":"Rozo Vasquez, Julian, et al. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.” <i>Practical Metallography</i>, vol. 59, no. 11, Walter de Gruyter GmbH, 2022, pp. 660–75, doi:<a href=\"https://doi.org/10.1515/pm-2022-0064\">10.1515/pm-2022-0064</a>.","bibtex":"@article{Rozo Vasquez_Kanagarajah_Arian_Kersting_Homberg_Trächtler_Walther_2022, title={Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming}, volume={59}, DOI={<a href=\"https://doi.org/10.1515/pm-2022-0064\">10.1515/pm-2022-0064</a>}, number={11}, journal={Practical Metallography}, publisher={Walter de Gruyter GmbH}, author={Rozo Vasquez, Julian and Kanagarajah, Hanigah and Arian, Bahman and Kersting, Lukas and Homberg, Werner and Trächtler, Ansgar and Walther, Frank}, year={2022}, pages={660–675} }","apa":"Rozo Vasquez, J., Kanagarajah, H., Arian, B., Kersting, L., Homberg, W., Trächtler, A., &#38; Walther, F. (2022). Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming. <i>Practical Metallography</i>, <i>59</i>(11), 660–675. <a href=\"https://doi.org/10.1515/pm-2022-0064\">https://doi.org/10.1515/pm-2022-0064</a>","ieee":"J. Rozo Vasquez <i>et al.</i>, “Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming,” <i>Practical Metallography</i>, vol. 59, no. 11, pp. 660–675, 2022, doi: <a href=\"https://doi.org/10.1515/pm-2022-0064\">10.1515/pm-2022-0064</a>.","chicago":"Rozo Vasquez, Julian, Hanigah Kanagarajah, Bahman Arian, Lukas Kersting, Werner Homberg, Ansgar Trächtler, and Frank Walther. “Coupled Microscopic and Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic Steel AISI 304L by Flow Forming.” <i>Practical Metallography</i> 59, no. 11 (2022): 660–75. <a href=\"https://doi.org/10.1515/pm-2022-0064\">https://doi.org/10.1515/pm-2022-0064</a>.","ama":"Rozo Vasquez J, Kanagarajah H, Arian B, et al. Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming. <i>Practical Metallography</i>. 2022;59(11):660-675. doi:<a href=\"https://doi.org/10.1515/pm-2022-0064\">10.1515/pm-2022-0064</a>"},"page":"660-675","intvolume":"        59","author":[{"full_name":"Rozo Vasquez, Julian","last_name":"Rozo Vasquez","first_name":"Julian"},{"full_name":"Kanagarajah, Hanigah","last_name":"Kanagarajah","first_name":"Hanigah"},{"full_name":"Arian, Bahman","id":"36287","last_name":"Arian","first_name":"Bahman"},{"first_name":"Lukas","full_name":"Kersting, Lukas","last_name":"Kersting"},{"first_name":"Werner","last_name":"Homberg","id":"233","full_name":"Homberg, Werner"},{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552"},{"first_name":"Frank","last_name":"Walther","full_name":"Walther, Frank"}],"volume":59,"date_updated":"2023-05-02T08:19:27Z","doi":"10.1515/pm-2022-0064","type":"journal_article","status":"public","user_id":"36287","department":[{"_id":"156"},{"_id":"153"},{"_id":"241"}],"_id":"34000","issue":"11","quality_controlled":"1","year":"2022","date_created":"2022-11-04T08:29:21Z","publisher":"Walter de Gruyter GmbH","title":"Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming","publication":"Practical Metallography","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>This paper presents the characterization of the microstructure evolution during flow forming of austenitic stainless steel AISI 304L. Due to plastic deformation of metastable austenitic steel, phase transformation from γ-austenite into α’-martensite occurs. This is initiated by the formation of shear bands as product of the external stresses. By means of coupled microscopic and micromagnetic investigations, a characterization of the microstructure was carried out. In particular, this study shows the distribution of the strain-induced α’-martensite and its influence on material properties like hardness at different depths. The microstructural analyses by means of electron backscattered diffraction (EBSD) technique, evidence a higher amount of α’-martensite (ca. 23 %) close to the outer specimen surface, where the plastic deformation and the direct contact with the forming tool take place. In the middle area (ca. 1.5 mm depth from the outer surface), the portion of transformed α’-martensite drops to 7 % and in the inner surface to 2 %. These results are well correlated with microhardness and micromagnetic measurements at different depths. EBSD and atomic force microscopy (AFM) were used to make a detailed characterization of the topography and degree of deformation of the shear bands. Likewise, the mechanisms of nucleation of α’-martensite were discussed. This research contributes to the development of micromagnetic sensors to monitor the evolution of properties during flow forming. This makes them more suitable for closed-loop property control, which offers possibilities for an application-oriented and more efficient production.</jats:p>"}],"language":[{"iso":"eng"}],"keyword":["Metals and Alloys","Mechanics of Materials","Condensed Matter Physics","Electronic","Optical and Magnetic Materials"]},{"quality_controlled":"1","year":"2022","publisher":"Trans Tech Publications, Ltd.","date_created":"2022-11-04T08:27:33Z","title":"Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes","publication":"Key Engineering Materials","abstract":[{"lang":"eng","text":"<jats:p>The production of complex multi-functional, high-strength parts is becoming increasingly important in the industry. Especially with small batch size, the incremental flow forming processes can be advantageous. The production of parts with complex geometry and locally graded material properties currently depicts a great challenge in the flow forming process. At this point, the usage of closed-loop control for the shape and properties could be a feasible new solution. The overall aim in this project is to establish an intelligent closed-loop control system for the wall thickness as well as the α’-martensite content of AISI 304L-workpieces in a flow forming process. To reach this goal, a novel sensor concept for online measurements of the wall thickness reduction and the martensite content during forming process is proposed. It includes the setup of a modified flow forming machine and the integration of the sensor system in the machine control. Additionally, a simulation model for the flow forming process is presented which describes the forming process with regard to the plastic workpiece deformation, the induced α’-martensite fraction, and the sensor behavior. This model was used for designing a closed-loop process control of the wall thickness reduction that was subsequently realized at the real plant including online measured feedback from the sensor system.</jats:p>"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"language":[{"iso":"eng"}],"publication_identifier":{"issn":["1662-9795"]},"publication_status":"published","page":"862-874","intvolume":"       926","citation":{"short":"L. Kersting, B. Arian, J.R. Vasquez, A. Trächtler, W. Homberg, F. Walther, Key Engineering Materials 926 (2022) 862–874.","bibtex":"@article{Kersting_Arian_Vasquez_Trächtler_Homberg_Walther_2022, title={Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes}, volume={926}, DOI={<a href=\"https://doi.org/10.4028/p-yp2hj3\">10.4028/p-yp2hj3</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Kersting, Lukas and Arian, Bahman and Vasquez, Julian Rozo and Trächtler, Ansgar and Homberg, Werner and Walther, Frank}, year={2022}, pages={862–874} }","mla":"Kersting, Lukas, et al. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.” <i>Key Engineering Materials</i>, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 862–74, doi:<a href=\"https://doi.org/10.4028/p-yp2hj3\">10.4028/p-yp2hj3</a>.","apa":"Kersting, L., Arian, B., Vasquez, J. R., Trächtler, A., Homberg, W., &#38; Walther, F. (2022). Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes. <i>Key Engineering Materials</i>, <i>926</i>, 862–874. <a href=\"https://doi.org/10.4028/p-yp2hj3\">https://doi.org/10.4028/p-yp2hj3</a>","ama":"Kersting L, Arian B, Vasquez JR, Trächtler A, Homberg W, Walther F. Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes. <i>Key Engineering Materials</i>. 2022;926:862-874. doi:<a href=\"https://doi.org/10.4028/p-yp2hj3\">10.4028/p-yp2hj3</a>","ieee":"L. Kersting, B. Arian, J. R. Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes,” <i>Key Engineering Materials</i>, vol. 926, pp. 862–874, 2022, doi: <a href=\"https://doi.org/10.4028/p-yp2hj3\">10.4028/p-yp2hj3</a>.","chicago":"Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes.” <i>Key Engineering Materials</i> 926 (2022): 862–74. <a href=\"https://doi.org/10.4028/p-yp2hj3\">https://doi.org/10.4028/p-yp2hj3</a>."},"date_updated":"2023-05-02T08:19:13Z","volume":926,"author":[{"full_name":"Kersting, Lukas","last_name":"Kersting","first_name":"Lukas"},{"first_name":"Bahman","id":"36287","full_name":"Arian, Bahman","last_name":"Arian"},{"first_name":"Julian Rozo","full_name":"Vasquez, Julian Rozo","last_name":"Vasquez"},{"last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552","first_name":"Ansgar"},{"id":"233","full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"},{"first_name":"Frank","last_name":"Walther","full_name":"Walther, Frank"}],"doi":"10.4028/p-yp2hj3","type":"journal_article","status":"public","_id":"33999","department":[{"_id":"156"},{"_id":"153"},{"_id":"241"}],"user_id":"36287"},{"citation":{"ama":"Rozo Vasquez J, Walther F, Arian B, Homberg W, Kersting L, Trächtler A. Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel. In: <i>Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing</i>. ; 2022.","chicago":"Rozo Vasquez, Julian, Frank Walther, Bahman Arian, Werner Homberg, Lukas Kersting, and Ansgar Trächtler. “Soft Sensor Concept for Micromagnetic Depth-Specific Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” In <i>Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing</i>, 2022.","ieee":"J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, and A. Trächtler, “Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel.,” presented at the ICBM 14, 14th International Conference on Barkhausen Noise and Micromagnetic Testing, Stockholm, 2022.","mla":"Rozo Vasquez, Julian, et al. “Soft Sensor Concept for Micromagnetic Depth-Specific Analysis of Phase Transformation during Flow Forming of AISI 304L Steel.” <i>Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing</i>, 2022.","short":"J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, A. Trächtler, in: Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.","bibtex":"@inproceedings{Rozo Vasquez_Walther_Arian_Homberg_Kersting_Trächtler_2022, title={Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel.}, booktitle={Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing}, author={Rozo Vasquez, Julian and Walther, Frank and Arian, Bahman and Homberg, Werner and Kersting, Lukas and Trächtler, Ansgar}, year={2022} }","apa":"Rozo Vasquez, J., Walther, F., Arian, B., Homberg, W., Kersting, L., &#38; Trächtler, A. (2022). Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel. <i>Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing</i>. ICBM 14, 14th International Conference on Barkhausen Noise and Micromagnetic Testing, Stockholm."},"year":"2022","quality_controlled":"1","conference":{"start_date":"2022-09-27","name":"ICBM 14, 14th International Conference on Barkhausen Noise and Micromagnetic Testing","location":"Stockholm","end_date":"2022-09-30"},"title":"Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel.","author":[{"first_name":"Julian","full_name":"Rozo Vasquez, Julian","last_name":"Rozo Vasquez"},{"first_name":"Frank","full_name":"Walther, Frank","last_name":"Walther"},{"first_name":"Bahman","id":"36287","full_name":"Arian, Bahman","last_name":"Arian"},{"last_name":"Homberg","id":"233","full_name":"Homberg, Werner","first_name":"Werner"},{"first_name":"Lukas","full_name":"Kersting, Lukas","last_name":"Kersting"},{"full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar"}],"date_created":"2023-01-13T10:10:03Z","date_updated":"2023-05-02T08:20:04Z","status":"public","publication":"Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing","type":"conference","language":[{"iso":"eng"}],"department":[{"_id":"156"},{"_id":"241"}],"user_id":"36287","_id":"36563"},{"type":"book","status":"public","department":[{"_id":"241"},{"_id":"156"}],"user_id":"36287","_id":"36412","language":[{"iso":"eng"}],"quality_controlled":"1","publication_identifier":{"isbn":["978-3-948749-23-1 "]},"citation":{"bibtex":"@book{Kersting_Trächtler_Arian_Homberg_Rozo Vasquez_Walther_2022, place={Magdeburg}, title={Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile.}, publisher={Diedrich}, author={Kersting, Lukas and Trächtler, Ansgar and Arian, Bahman and Homberg, Werner and Rozo Vasquez, Julian and Walther, Frank}, year={2022} }","short":"L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, F. Walther, Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile., Diedrich, Magdeburg, 2022.","mla":"Kersting, Lukas, et al. <i>Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile.</i> Diedrich, 2022.","apa":"Kersting, L., Trächtler, A., Arian, B., Homberg, W., Rozo Vasquez, J., &#38; Walther, F. (2022). <i>Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile.</i> Diedrich.","chicago":"Kersting, Lukas, Ansgar Trächtler, Bahman Arian, Werner Homberg, Julian Rozo Vasquez, and Frank Walther. <i>Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile.</i> Magdeburg: Diedrich, 2022.","ieee":"L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, and F. Walther, <i>Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile.</i> Magdeburg: Diedrich, 2022.","ama":"Kersting L, Trächtler A, Arian B, Homberg W, Rozo Vasquez J, Walther F. <i>Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile.</i> Diedrich; 2022."},"year":"2022","place":"Magdeburg","date_created":"2023-01-12T11:44:49Z","author":[{"last_name":"Kersting","full_name":"Kersting, Lukas","first_name":"Lukas"},{"last_name":"Trächtler","full_name":"Trächtler, Ansgar","first_name":"Ansgar"},{"first_name":"Bahman","last_name":"Arian","full_name":"Arian, Bahman","id":"36287"},{"full_name":"Homberg, Werner","id":"233","last_name":"Homberg","first_name":"Werner"},{"first_name":"Julian","full_name":"Rozo Vasquez, Julian","last_name":"Rozo Vasquez"},{"first_name":"Frank","last_name":"Walther","full_name":"Walther, Frank"}],"publisher":"Diedrich","date_updated":"2023-05-02T08:20:36Z","title":"Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile."},{"status":"public","type":"dissertation","language":[{"iso":"eng"}],"department":[{"_id":"156"}],"user_id":"7888","series_title":"Reihe Paderborner Umformtechnik","_id":"30255","citation":{"mla":"Wiens, Eugen. <i>Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften</i>. Shaker, 2022.","bibtex":"@book{Wiens_2022, place={Düren}, series={Reihe Paderborner Umformtechnik}, title={Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften}, publisher={Shaker}, author={Wiens, Eugen}, year={2022}, collection={Reihe Paderborner Umformtechnik} }","short":"E. Wiens, Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften, Shaker, Düren, 2022.","apa":"Wiens, E. (2022). <i>Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften</i>. Shaker.","chicago":"Wiens, Eugen. <i>Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften</i>. Reihe Paderborner Umformtechnik. Düren: Shaker, 2022.","ieee":"E. Wiens, <i>Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften</i>. Düren: Shaker, 2022.","ama":"Wiens E. <i>Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften</i>. Shaker; 2022."},"place":"Düren","year":"2022","publication_identifier":{"isbn":["978-3-8440-8408-5"]},"title":"Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften","date_created":"2022-03-11T08:08:33Z","author":[{"first_name":"Eugen","last_name":"Wiens","full_name":"Wiens, Eugen","id":"7888"}],"date_updated":"2023-05-05T11:19:34Z","publisher":"Shaker"},{"user_id":"13480","department":[{"_id":"156"}],"_id":"25448","language":[{"iso":"eng"}],"type":"book_chapter","publication":"Forming the Future","status":"public","date_created":"2021-10-05T08:18:08Z","author":[{"first_name":"Thomas","full_name":"Heggemann, Thomas","id":"9360","last_name":"Heggemann"},{"id":"13480","full_name":"Sapli, Hüseyin","last_name":"Sapli","first_name":"Hüseyin"},{"last_name":"Homberg","full_name":"Homberg, W.","first_name":"W."}],"date_updated":"2022-01-06T06:57:05Z","doi":"10.1007/978-3-030-75381-8_219","title":"Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates","publication_status":"published","publication_identifier":{"issn":["2367-1181","2367-1696"]},"citation":{"ieee":"T. Heggemann, H. Sapli, and W. Homberg, “Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates,” in <i>Forming the Future</i>, Cham, 2021.","chicago":"Heggemann, Thomas, Hüseyin Sapli, and W. Homberg. “Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates.” In <i>Forming the Future</i>. Cham, 2021. <a href=\"https://doi.org/10.1007/978-3-030-75381-8_219\">https://doi.org/10.1007/978-3-030-75381-8_219</a>.","ama":"Heggemann T, Sapli H, Homberg W. Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates. In: <i>Forming the Future</i>. ; 2021. doi:<a href=\"https://doi.org/10.1007/978-3-030-75381-8_219\">10.1007/978-3-030-75381-8_219</a>","bibtex":"@inbook{Heggemann_Sapli_Homberg_2021, place={Cham}, title={Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-75381-8_219\">10.1007/978-3-030-75381-8_219</a>}, booktitle={Forming the Future}, author={Heggemann, Thomas and Sapli, Hüseyin and Homberg, W.}, year={2021} }","mla":"Heggemann, Thomas, et al. “Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates.” <i>Forming the Future</i>, 2021, doi:<a href=\"https://doi.org/10.1007/978-3-030-75381-8_219\">10.1007/978-3-030-75381-8_219</a>.","short":"T. Heggemann, H. Sapli, W. Homberg, in: Forming the Future, Cham, 2021.","apa":"Heggemann, T., Sapli, H., &#38; Homberg, W. (2021). Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates. In <i>Forming the Future</i>. <a href=\"https://doi.org/10.1007/978-3-030-75381-8_219\">https://doi.org/10.1007/978-3-030-75381-8_219</a>"},"year":"2021","place":"Cham"},{"_id":"26191","user_id":"13480","department":[{"_id":"156"},{"_id":"158"}],"article_number":"012028","language":[{"iso":"eng"}],"type":"journal_article","publication":"IOP Conference Series: Materials Science and Engineering","status":"public","date_updated":"2022-01-06T06:57:17Z","author":[{"first_name":"Dietrich","full_name":"Voswinkel, Dietrich","id":"52634","last_name":"Voswinkel"},{"first_name":"Hüseyin","id":"13480","full_name":"Sapli, Hüseyin","last_name":"Sapli"},{"full_name":"Kloidt, Dennis","last_name":"Kloidt","first_name":"Dennis"},{"first_name":"Thomas","last_name":"Heggemann","full_name":"Heggemann, Thomas","id":"9360"},{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"},{"first_name":"Olexandr","full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin"},{"full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2021-10-15T08:05:53Z","title":"Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment","doi":"10.1088/1757-899x/1190/1/012028","publication_status":"published","publication_identifier":{"issn":["1757-8981","1757-899X"]},"year":"2021","citation":{"bibtex":"@article{Voswinkel_Sapli_Kloidt_Heggemann_Homberg_Grydin_Schaper_2021, title={Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment}, DOI={<a href=\"https://doi.org/10.1088/1757-899x/1190/1/012028\">10.1088/1757-899x/1190/1/012028</a>}, number={012028}, journal={IOP Conference Series: Materials Science and Engineering}, author={Voswinkel, Dietrich and Sapli, Hüseyin and Kloidt, Dennis and Heggemann, Thomas and Homberg, Werner and Grydin, Olexandr and Schaper, Mirko}, year={2021} }","mla":"Voswinkel, Dietrich, et al. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment.” <i>IOP Conference Series: Materials Science and Engineering</i>, 012028, 2021, doi:<a href=\"https://doi.org/10.1088/1757-899x/1190/1/012028\">10.1088/1757-899x/1190/1/012028</a>.","short":"D. Voswinkel, H. Sapli, D. Kloidt, T. Heggemann, W. Homberg, O. Grydin, M. Schaper, IOP Conference Series: Materials Science and Engineering (2021).","apa":"Voswinkel, D., Sapli, H., Kloidt, D., Heggemann, T., Homberg, W., Grydin, O., &#38; Schaper, M. (2021). Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment. <i>IOP Conference Series: Materials Science and Engineering</i>, Article 012028. <a href=\"https://doi.org/10.1088/1757-899x/1190/1/012028\">https://doi.org/10.1088/1757-899x/1190/1/012028</a>","ama":"Voswinkel D, Sapli H, Kloidt D, et al. Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment. <i>IOP Conference Series: Materials Science and Engineering</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1088/1757-899x/1190/1/012028\">10.1088/1757-899x/1190/1/012028</a>","ieee":"D. Voswinkel <i>et al.</i>, “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” <i>IOP Conference Series: Materials Science and Engineering</i>, Art. no. 012028, 2021, doi: <a href=\"https://doi.org/10.1088/1757-899x/1190/1/012028\">10.1088/1757-899x/1190/1/012028</a>.","chicago":"Voswinkel, Dietrich, Hüseyin Sapli, Dennis Kloidt, Thomas Heggemann, Werner Homberg, Olexandr Grydin, and Mirko Schaper. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment.” <i>IOP Conference Series: Materials Science and Engineering</i>, 2021. <a href=\"https://doi.org/10.1088/1757-899x/1190/1/012028\">https://doi.org/10.1088/1757-899x/1190/1/012028</a>."}}]