---
_id: '21679'
abstract:
- lang: eng
  text: <jats:p>Three-dimensional modelling enables to determine the in-plane material
    flow in asymmetrical situation. Thus, the distortion of the sheets to be joined
    can be characterized more exactly. This study shows a method for building up a
    three-dimensional shear-clinching framework without damage criteria. In fact,
    the die-sided sheet in shear-clinching was designed as a pre-punched sheet and
    slugs. The material separation in the die-sided joining partner, which in two-dimensional
    simulation is often described by macro- and micromechanical fracture criteria,
    was realised in this study based on a defined contact condition. By means of a
    shear-cutting simulation, a correlation between the break angle and the separation
    stress was determined, which was used as a separation criterion in the shear-clinching
    simulation. The separation line was confirmed using post-particles. To validate
    this model, the results of the simulation using a quadratic single-point specimen
    were compared to the experiments with respect to the distortion of the joining
    partner. In general, the built three-dimensional framework provides for further
    tool developments with regard to the reduction of distortion in shear-clinching.</jats:p>
author:
- first_name: Daxin
  full_name: Han, Daxin
  id: '36544'
  last_name: Han
- first_name: Chen
  full_name: Yang, Chen
  last_name: Yang
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: Han D, Yang C, Meschut G. A method for three-dimensional modelling of the shear-clinching
    process. <i>ESAFORM 2021</i>. 2021. doi:<a href="https://doi.org/10.25518/esaform21.1948">10.25518/esaform21.1948</a>
  apa: Han, D., Yang, C., &#38; Meschut, G. (2021). A method for three-dimensional
    modelling of the shear-clinching process. <i>ESAFORM 2021</i>. <a href="https://doi.org/10.25518/esaform21.1948">https://doi.org/10.25518/esaform21.1948</a>
  bibtex: '@article{Han_Yang_Meschut_2021, title={A method for three-dimensional modelling
    of the shear-clinching process}, DOI={<a href="https://doi.org/10.25518/esaform21.1948">10.25518/esaform21.1948</a>},
    journal={ESAFORM 2021}, author={Han, Daxin and Yang, Chen and Meschut, Gerson},
    year={2021} }'
  chicago: Han, Daxin, Chen Yang, and Gerson Meschut. “A Method for Three-Dimensional
    Modelling of the Shear-Clinching Process.” <i>ESAFORM 2021</i>, 2021. <a href="https://doi.org/10.25518/esaform21.1948">https://doi.org/10.25518/esaform21.1948</a>.
  ieee: D. Han, C. Yang, and G. Meschut, “A method for three-dimensional modelling
    of the shear-clinching process,” <i>ESAFORM 2021</i>, 2021.
  mla: Han, Daxin, et al. “A Method for Three-Dimensional Modelling of the Shear-Clinching
    Process.” <i>ESAFORM 2021</i>, 2021, doi:<a href="https://doi.org/10.25518/esaform21.1948">10.25518/esaform21.1948</a>.
  short: D. Han, C. Yang, G. Meschut, ESAFORM 2021 (2021).
date_created: 2021-04-21T06:22:10Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '157'
doi: 10.25518/esaform21.1948
language:
- iso: eng
publication: ESAFORM 2021
publication_status: published
status: public
title: A method for three-dimensional modelling of the shear-clinching process
type: journal_article
user_id: '36544'
year: '2021'
...
---
_id: '21716'
author:
- first_name: Tobias
  full_name: Schmolke, Tobias
  id: '44759'
  last_name: Schmolke
- first_name: Christopher
  full_name: Krüger, Christopher
  last_name: Krüger
- first_name: David
  full_name: Merdivan, David
  last_name: Merdivan
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Peter
  full_name: Urban, Peter
  last_name: Urban
citation:
  ama: 'Schmolke T, Krüger C, Merdivan D, Meschut G, Urban P. Development of a Leak
    Test Method for the Joining technology of Functionally Integrated Lightweight
    Battery Housings for Electric Vehicles. In: ; 2021.'
  apa: Schmolke, T., Krüger, C., Merdivan, D., Meschut, G., &#38; Urban, P. (2021).
    Development of a Leak Test Method for the Joining technology of Functionally Integrated
    Lightweight Battery Housings for Electric Vehicles. Presented at the Joining in
    Car Body Engineering 2021, Bad Nauheim.
  bibtex: '@inproceedings{Schmolke_Krüger_Merdivan_Meschut_Urban_2021, title={Development
    of a Leak Test Method for the Joining technology of Functionally Integrated Lightweight
    Battery Housings for Electric Vehicles}, author={Schmolke, Tobias and Krüger,
    Christopher and Merdivan, David and Meschut, Gerson and Urban, Peter}, year={2021}
    }'
  chicago: Schmolke, Tobias, Christopher Krüger, David Merdivan, Gerson Meschut, and
    Peter Urban. “Development of a Leak Test Method for the Joining Technology of
    Functionally Integrated Lightweight Battery Housings for Electric Vehicles,” 2021.
  ieee: T. Schmolke, C. Krüger, D. Merdivan, G. Meschut, and P. Urban, “Development
    of a Leak Test Method for the Joining technology of Functionally Integrated Lightweight
    Battery Housings for Electric Vehicles,” presented at the Joining in Car Body
    Engineering 2021, Bad Nauheim, 2021.
  mla: Schmolke, Tobias, et al. <i>Development of a Leak Test Method for the Joining
    Technology of Functionally Integrated Lightweight Battery Housings for Electric
    Vehicles</i>. 2021.
  short: 'T. Schmolke, C. Krüger, D. Merdivan, G. Meschut, P. Urban, in: 2021.'
conference:
  end_date: 2021-04-22
  location: Bad Nauheim
  name: Joining in Car Body Engineering 2021
  start_date: 2021-04-19
date_created: 2021-04-22T10:09:03Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '157'
language:
- iso: eng
status: public
title: Development of a Leak Test Method for the Joining technology of Functionally
  Integrated Lightweight Battery Housings for Electric Vehicles
type: conference
user_id: '44759'
year: '2021'
...
---
_id: '21717'
author:
- first_name: Tobias
  full_name: Schmolke, Tobias
  id: '44759'
  last_name: Schmolke
- first_name: Dominik
  full_name: Teutenberg, Dominik
  id: '537'
  last_name: Teutenberg
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Dennis
  full_name: Meinderink, Dennis
  id: '32378'
  last_name: Meinderink
  orcid: 0000-0002-2755-6514
- first_name: 'Leon '
  full_name: 'Koch, Leon '
  last_name: Koch
- first_name: Christoph
  full_name: Ebbert, Christoph
  id: '7266'
  last_name: Ebbert
- first_name: Guido
  full_name: Grundmeier, Guido
  id: '194'
  last_name: Grundmeier
citation:
  ama: 'Schmolke T, Teutenberg D, Meschut G, et al. Entwicklung einer Methode zur
    Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses
    gegenüber mechanischer und medialer Belastung und Berücksichtigung der Interphasenstruktur.
    In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., ed. ;
    2021.'
  apa: Schmolke, T., Teutenberg, D., Meschut, G., Meinderink, D., Koch, L., Ebbert,
    C., &#38; Grundmeier, G. (2021). Entwicklung einer Methode zur Bewertung einer
    stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer
    und medialer Belastung und Berücksichtigung der Interphasenstruktur. In DECHEMA,
    Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.). Presented at
    the 21. Kolloquium Gemeinsame Forschung in der Klebtechnik , Online Event.
  bibtex: '@inproceedings{Schmolke_Teutenberg_Meschut_Meinderink_Koch_Ebbert_Grundmeier_2021,
    title={Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
    eines Batteriegehäuses gegenüber mechanischer und medialer Belastung und Berücksichtigung
    der Interphasenstruktur}, author={Schmolke, Tobias and Teutenberg, Dominik and
    Meschut, Gerson and Meinderink, Dennis and Koch, Leon  and Ebbert, Christoph and
    Grundmeier, Guido}, editor={DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie
    e.V.Editor}, year={2021} }'
  chicago: Schmolke, Tobias, Dominik Teutenberg, Gerson Meschut, Dennis Meinderink,
    Leon  Koch, Christoph Ebbert, and Guido Grundmeier. “Entwicklung Einer Methode
    Zur Bewertung Einer Stahlintensiven Mischbau-Klebverbindung Eines Batteriegehäuses
    Gegenüber Mechanischer Und Medialer Belastung Und Berücksichtigung Der Interphasenstruktur.”
    edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.,
    2021.
  ieee: T. Schmolke <i>et al.</i>, “Entwicklung einer Methode zur Bewertung einer
    stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer
    und medialer Belastung und Berücksichtigung der Interphasenstruktur,” presented
    at the 21. Kolloquium Gemeinsame Forschung in der Klebtechnik , Online Event,
    2021.
  mla: Schmolke, Tobias, et al. <i>Entwicklung Einer Methode Zur Bewertung Einer Stahlintensiven
    Mischbau-Klebverbindung Eines Batteriegehäuses Gegenüber Mechanischer Und Medialer
    Belastung Und Berücksichtigung Der Interphasenstruktur</i>. Edited by DECHEMA,
    Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
  short: 'T. Schmolke, D. Teutenberg, G. Meschut, D. Meinderink, L. Koch, C. Ebbert,
    G. Grundmeier, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie
    e.V. (Ed.), 2021.'
conference:
  end_date: 2021-03-03
  location: Online Event
  name: '21. Kolloquium Gemeinsame Forschung in der Klebtechnik '
  start_date: 2021-03-02
corporate_editor:
- DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
date_created: 2021-04-22T10:19:48Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '157'
- _id: '302'
language:
- iso: eng
status: public
title: Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung
  eines Batteriegehäuses gegenüber mechanischer und medialer Belastung und Berücksichtigung
  der Interphasenstruktur
type: conference
user_id: '7266'
year: '2021'
...
---
_id: '21718'
author:
- first_name: Elena
  full_name: Fischer, Elena
  id: '14068'
  last_name: Fischer
- first_name: Tobias
  full_name: Schmolke, Tobias
  id: '44759'
  last_name: Schmolke
- first_name: Nick
  full_name: Chudalla, Nick
  id: '41235'
  last_name: Chudalla
- first_name: Dominik
  full_name: Teutenberg, Dominik
  id: '537'
  last_name: Teutenberg
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: 'Fischer E, Schmolke T, Chudalla N, Teutenberg D, Meschut G. Auslegungsmethode
    für Klebverbindungen mit KTL-beschichteten Fügeteilen und polymeren, faserverstärkten
    Werkstoffen – Kleben auf KTL. In:  DECHEMA, Gesellschaft für Chemische Technik
    und Biotechnologie e.V, ed. ; 2021.'
  apa: Fischer, E., Schmolke, T., Chudalla, N., Teutenberg, D., &#38; Meschut, G.
    (2021). Auslegungsmethode für Klebverbindungen mit KTL-beschichteten Fügeteilen
    und polymeren, faserverstärkten Werkstoffen – Kleben auf KTL. In  DECHEMA, Gesellschaft
    für Chemische Technik und Biotechnologie e.V (Ed.). Presented at the  21. Kolloquium
    Gemeinsame Forschung in der Klebtechnik , Online Event.
  bibtex: '@inproceedings{Fischer_Schmolke_Chudalla_Teutenberg_Meschut_2021, title={Auslegungsmethode
    für Klebverbindungen mit KTL-beschichteten Fügeteilen und polymeren, faserverstärkten
    Werkstoffen – Kleben auf KTL}, author={Fischer, Elena and Schmolke, Tobias and
    Chudalla, Nick and Teutenberg, Dominik and Meschut, Gerson}, editor={ DECHEMA,
    Gesellschaft für Chemische Technik und Biotechnologie e.VEditor}, year={2021}
    }'
  chicago: Fischer, Elena, Tobias Schmolke, Nick Chudalla, Dominik Teutenberg, and
    Gerson Meschut. “Auslegungsmethode Für Klebverbindungen Mit KTL-Beschichteten
    Fügeteilen Und Polymeren, Faserverstärkten Werkstoffen – Kleben Auf KTL.” edited
    by  DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V, 2021.
  ieee: E. Fischer, T. Schmolke, N. Chudalla, D. Teutenberg, and G. Meschut, “Auslegungsmethode
    für Klebverbindungen mit KTL-beschichteten Fügeteilen und polymeren, faserverstärkten
    Werkstoffen – Kleben auf KTL,” presented at the  21. Kolloquium Gemeinsame Forschung
    in der Klebtechnik , Online Event, 2021.
  mla: Fischer, Elena, et al. <i>Auslegungsmethode Für Klebverbindungen Mit KTL-Beschichteten
    Fügeteilen Und Polymeren, Faserverstärkten Werkstoffen – Kleben Auf KTL</i>. Edited
    by  DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V, 2021.
  short: 'E. Fischer, T. Schmolke, N. Chudalla, D. Teutenberg, G. Meschut, in:  DECHEMA,
    Gesellschaft für Chemische Technik und Biotechnologie e.V (Ed.), 2021.'
conference:
  end_date: 2021-03-03
  location: Online Event
  name: ' 21. Kolloquium Gemeinsame Forschung in der Klebtechnik '
  start_date: 2021-03-02
corporate_editor:
- ' DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V'
date_created: 2021-04-22T10:25:28Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '157'
language:
- iso: eng
status: public
title: Auslegungsmethode für Klebverbindungen mit KTL-beschichteten Fügeteilen und
  polymeren, faserverstärkten Werkstoffen – Kleben auf KTL
type: conference
user_id: '44759'
year: '2021'
...
---
_id: '21800'
alternative_title:
- Grundlagen der Fertigung, Charakterisierung und Auslegung
author:
- first_name: Sascha
  full_name: Sander, Sascha
  id: '23175'
  last_name: Sander
- first_name: Mathias
  full_name: Bobbert, Mathias
  id: '7850'
  last_name: Bobbert
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: Sander S, Bobbert M, Meschut G. <i>Intrinsische  Hybridverbunde für  Leichtbautragstrukturen</i>.
    Springer Vieweg; 2021.
  apa: Sander, S., Bobbert, M., &#38; Meschut, G. (2021). <i>Intrinsische  Hybridverbunde
    für  Leichtbautragstrukturen</i>. Springer Vieweg.
  bibtex: '@book{Sander_Bobbert_Meschut_2021, title={Intrinsische  Hybridverbunde
    für  Leichtbautragstrukturen}, publisher={Springer Vieweg}, author={Sander, Sascha
    and Bobbert, Mathias and Meschut, Gerson}, year={2021} }'
  chicago: Sander, Sascha, Mathias Bobbert, and Gerson Meschut. <i>Intrinsische  Hybridverbunde
    für  Leichtbautragstrukturen</i>. Springer Vieweg, 2021.
  ieee: S. Sander, M. Bobbert, and G. Meschut, <i>Intrinsische  Hybridverbunde für 
    Leichtbautragstrukturen</i>. Springer Vieweg, 2021.
  mla: Sander, Sascha, et al. <i>Intrinsische  Hybridverbunde für  Leichtbautragstrukturen</i>.
    Springer Vieweg, 2021.
  short: S. Sander, M. Bobbert, G. Meschut, Intrinsische  Hybridverbunde für  Leichtbautragstrukturen,
    Springer Vieweg, 2021.
date_created: 2021-04-26T13:21:58Z
date_updated: 2022-01-06T06:55:14Z
department:
- _id: '157'
language:
- iso: ger
page: '332'
publication_identifier:
  eisbn:
  - 978-3-662-62833-1
  isbn:
  - 978-3-662-62832-4
publication_status: published
publisher: Springer Vieweg
status: public
title: Intrinsische  Hybridverbunde für  Leichtbautragstrukturen
type: book
user_id: '23175'
year: '2021'
...
---
_id: '21823'
article_number: '117182'
author:
- first_name: Daxin
  full_name: Han, Daxin
  id: '36544'
  last_name: Han
- first_name: Keke
  full_name: Yang, Keke
  last_name: Yang
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: Han D, Yang K, Meschut G. Mechanical joining of glass fibre reinforced polymer
    (GFRP) through an innovative solid self-piercing rivet. <i>Journal of Materials
    Processing Technology</i>. 2021. doi:<a href="https://doi.org/10.1016/j.jmatprotec.2021.117182">10.1016/j.jmatprotec.2021.117182</a>
  apa: Han, D., Yang, K., &#38; Meschut, G. (2021). Mechanical joining of glass fibre
    reinforced polymer (GFRP) through an innovative solid self-piercing rivet. <i>Journal
    of Materials Processing Technology</i>. <a href="https://doi.org/10.1016/j.jmatprotec.2021.117182">https://doi.org/10.1016/j.jmatprotec.2021.117182</a>
  bibtex: '@article{Han_Yang_Meschut_2021, title={Mechanical joining of glass fibre
    reinforced polymer (GFRP) through an innovative solid self-piercing rivet}, DOI={<a
    href="https://doi.org/10.1016/j.jmatprotec.2021.117182">10.1016/j.jmatprotec.2021.117182</a>},
    number={117182}, journal={Journal of Materials Processing Technology}, author={Han,
    Daxin and Yang, Keke and Meschut, Gerson}, year={2021} }'
  chicago: Han, Daxin, Keke Yang, and Gerson Meschut. “Mechanical Joining of Glass
    Fibre Reinforced Polymer (GFRP) through an Innovative Solid Self-Piercing Rivet.”
    <i>Journal of Materials Processing Technology</i>, 2021. <a href="https://doi.org/10.1016/j.jmatprotec.2021.117182">https://doi.org/10.1016/j.jmatprotec.2021.117182</a>.
  ieee: D. Han, K. Yang, and G. Meschut, “Mechanical joining of glass fibre reinforced
    polymer (GFRP) through an innovative solid self-piercing rivet,” <i>Journal of
    Materials Processing Technology</i>, 2021.
  mla: Han, Daxin, et al. “Mechanical Joining of Glass Fibre Reinforced Polymer (GFRP)
    through an Innovative Solid Self-Piercing Rivet.” <i>Journal of Materials Processing
    Technology</i>, 117182, 2021, doi:<a href="https://doi.org/10.1016/j.jmatprotec.2021.117182">10.1016/j.jmatprotec.2021.117182</a>.
  short: D. Han, K. Yang, G. Meschut, Journal of Materials Processing Technology (2021).
date_created: 2021-04-29T08:05:21Z
date_updated: 2022-01-06T06:55:17Z
department:
- _id: '157'
doi: 10.1016/j.jmatprotec.2021.117182
language:
- iso: eng
publication: Journal of Materials Processing Technology
publication_identifier:
  issn:
  - 0924-0136
publication_status: published
status: public
title: Mechanical joining of glass fibre reinforced polymer (GFRP) through an innovative
  solid self-piercing rivet
type: journal_article
user_id: '36544'
year: '2021'
...
---
_id: '21560'
author:
- first_name: Felix
  full_name: Beule, Felix
  id: '66192'
  last_name: Beule
- first_name: Dominik
  full_name: Teutenberg, Dominik
  id: '537'
  last_name: Teutenberg
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Tobias
  full_name: Aubel, Tobias
  last_name: Aubel
- first_name: Anton
  full_name: Matzenmiller, Anton
  last_name: Matzenmiller
citation:
  ama: 'Beule F, Teutenberg D, Meschut G, Aubel T, Matzenmiller A. Methodenentwicklung
    zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen
    in stahlintensiven Mischbaustrukturen. In: <i>21. Kolloquium: Gemeinsame Forschung
    in der Klebtechnik</i>. ; 2021.'
  apa: 'Beule, F., Teutenberg, D., Meschut, G., Aubel, T., &#38; Matzenmiller, A.
    (2021). Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter
    Klebverbindungen in stahlintensiven Mischbaustrukturen. <i>21. Kolloquium: Gemeinsame
    Forschung in der Klebtechnik</i>. 21. Kolloquium: Gemeinsame Forschung in der
    Klebtechnik.'
  bibtex: '@inproceedings{Beule_Teutenberg_Meschut_Aubel_Matzenmiller_2021, title={Methodenentwicklung
    zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen
    in stahlintensiven Mischbaustrukturen}, booktitle={21. Kolloquium: Gemeinsame
    Forschung in der Klebtechnik}, author={Beule, Felix and Teutenberg, Dominik and
    Meschut, Gerson and Aubel, Tobias and Matzenmiller, Anton}, year={2021} }'
  chicago: 'Beule, Felix, Dominik Teutenberg, Gerson Meschut, Tobias Aubel, and Anton
    Matzenmiller. “Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung
    vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.” In <i>21.
    Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2021.'
  ieee: 'F. Beule, D. Teutenberg, G. Meschut, T. Aubel, and A. Matzenmiller, “Methodenentwicklung
    zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen
    in stahlintensiven Mischbaustrukturen,” presented at the 21. Kolloquium: Gemeinsame
    Forschung in der Klebtechnik, 2021.'
  mla: 'Beule, Felix, et al. “Methodenentwicklung zur Versagensanalyse aufgrund der
    Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.”
    <i>21. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2021.'
  short: 'F. Beule, D. Teutenberg, G. Meschut, T. Aubel, A. Matzenmiller, in: 21.
    Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021.'
conference:
  end_date: 2021-03-03
  name: '21. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
  start_date: 2021-03-02
date_created: 2021-03-23T11:42:37Z
date_updated: 2022-02-16T07:14:36Z
department:
- _id: '157'
language:
- iso: ger
publication: '21. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter
  Klebverbindungen in stahlintensiven Mischbaustrukturen
type: conference_abstract
user_id: '66192'
year: '2021'
...
---
_id: '20807'
author:
- first_name: Christian Roman
  full_name: Bielak, Christian Roman
  id: '34782'
  last_name: Bielak
- first_name: Max
  full_name: Böhnke, Max
  id: '45779'
  last_name: Böhnke
- first_name: Mathias
  full_name: Bobbert, Mathias
  id: '7850'
  last_name: Bobbert
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: Bielak CR, Böhnke M, Bobbert M, Meschut G. Further development of a numerical
    method for analyzing the load capacity of clinched joints in versatile process
    chains. doi:<a href="https://doi.org/10.25518/esaform21.4298">10.25518/esaform21.4298</a>
  apa: Bielak, C. R., Böhnke, M., Bobbert, M., &#38; Meschut, G. (n.d.). <i>Further
    development of a numerical method for analyzing the load capacity of clinched
    joints in versatile process chains</i>. ESAFORM 2021, Lüttich. <a href="https://doi.org/10.25518/esaform21.4298">https://doi.org/10.25518/esaform21.4298</a>
  bibtex: '@inproceedings{Bielak_Böhnke_Bobbert_Meschut, place={ESAFORM 2021}, title={Further
    development of a numerical method for analyzing the load capacity of clinched
    joints in versatile process chains}, DOI={<a href="https://doi.org/10.25518/esaform21.4298">10.25518/esaform21.4298</a>},
    author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias and Meschut,
    Gerson} }'
  chicago: Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut.
    “Further Development of a Numerical Method for Analyzing the Load Capacity of
    Clinched Joints in Versatile Process Chains.” ESAFORM 2021, n.d. <a href="https://doi.org/10.25518/esaform21.4298">https://doi.org/10.25518/esaform21.4298</a>.
  ieee: 'C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Further development
    of a numerical method for analyzing the load capacity of clinched joints in versatile
    process chains,” presented at the ESAFORM 2021, Lüttich, doi: <a href="https://doi.org/10.25518/esaform21.4298">10.25518/esaform21.4298</a>.'
  mla: Bielak, Christian Roman, et al. <i>Further Development of a Numerical Method
    for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains</i>.
    doi:<a href="https://doi.org/10.25518/esaform21.4298">10.25518/esaform21.4298</a>.
  short: 'C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: ESAFORM 2021, n.d.'
conference:
  end_date: 2021 04 16
  location: Lüttich
  name: ESAFORM 2021
  start_date: 2021 04 14
date_created: 2020-12-21T08:15:27Z
date_updated: 2022-03-29T12:55:57Z
department:
- _id: '157'
doi: 10.25518/esaform21.4298
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://popups.uliege.be/esaform21/index.php?id=3418
oa: '1'
place: ESAFORM 2021
project:
- _id: '130'
  grant_number: '418701707'
  name: 'TRR 285: TRR 285'
- _id: '131'
  name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
  name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication_status: submitted
status: public
title: Further development of a numerical method for analyzing the load capacity of
  clinched joints in versatile process chains
type: conference
user_id: '34782'
year: '2021'
...
---
_id: '30652'
abstract:
- lang: eng
  text: Clinching continuous fibre reinforced thermoplastic composites and metals
    is challenging due to the low ductility of the composite material. Therefore,
    a number of novel clinching technologies has been developed specifically for these
    material combinations. A systematic overview of these advanced clinching methods
    is given in the present paper. With a focus on process design, three selected
    clinching methods suitable for different joining tasks are described in detail.
    The clinching processes including equipment and tools, observed process phenomena
    and the resultant material structure are compared. Process phenomena during joining
    are explained in general and compared using computed tomography and micrograph
    images for each process. In addition the load bearing behaviour and the corresponding
    failure mechanisms are investigated by means of single-lap shear tests. Finally,
    the new joining technologies are discussed regarding application relevant criteria.
author:
- first_name: B.
  full_name: Gröger, B.
  last_name: Gröger
- first_name: J.
  full_name: Troschitz, J.
  last_name: Troschitz
- first_name: J.
  full_name: Vorderbrüggen, J.
  last_name: Vorderbrüggen
- first_name: C.
  full_name: Vogel, C.
  last_name: Vogel
- first_name: R.
  full_name: Kupfer, R.
  last_name: Kupfer
- first_name: G.
  full_name: Meschut, G.
  last_name: Meschut
- first_name: M.
  full_name: Gude, M.
  last_name: Gude
citation:
  ama: Gröger B, Troschitz J, Vorderbrüggen J, et al. Clinching of Thermoplastic Composites
    and Metals—A Comparison of Three Novel Joining Technologies. <i>Materials</i>.
    2021;14:2286. doi:<a href="https://doi.org/10.3390/ma14092286X">10.3390/ma14092286X</a>
  apa: Gröger, B., Troschitz, J., Vorderbrüggen, J., Vogel, C., Kupfer, R., Meschut,
    G., &#38; Gude, M. (2021). Clinching of Thermoplastic Composites and Metals—A
    Comparison of Three Novel Joining Technologies. <i>Materials</i>, <i>14</i>, 2286.
    <a href="https://doi.org/10.3390/ma14092286X">https://doi.org/10.3390/ma14092286X</a>
  bibtex: '@article{Gröger_Troschitz_Vorderbrüggen_Vogel_Kupfer_Meschut_Gude_2021,
    title={Clinching of Thermoplastic Composites and Metals—A Comparison of Three
    Novel Joining Technologies}, volume={14}, DOI={<a href="https://doi.org/10.3390/ma14092286X">10.3390/ma14092286X</a>},
    journal={Materials}, author={Gröger, B. and Troschitz, J. and Vorderbrüggen, J.
    and Vogel, C. and Kupfer, R. and Meschut, G. and Gude, M.}, year={2021}, pages={2286}
    }'
  chicago: 'Gröger, B., J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut,
    and M. Gude. “Clinching of Thermoplastic Composites and Metals—A Comparison of
    Three Novel Joining Technologies.” <i>Materials</i> 14 (2021): 2286. <a href="https://doi.org/10.3390/ma14092286X">https://doi.org/10.3390/ma14092286X</a>.'
  ieee: 'B. Gröger <i>et al.</i>, “Clinching of Thermoplastic Composites and Metals—A
    Comparison of Three Novel Joining Technologies,” <i>Materials</i>, vol. 14, p.
    2286, 2021, doi: <a href="https://doi.org/10.3390/ma14092286X">10.3390/ma14092286X</a>.'
  mla: Gröger, B., et al. “Clinching of Thermoplastic Composites and Metals—A Comparison
    of Three Novel Joining Technologies.” <i>Materials</i>, vol. 14, 2021, p. 2286,
    doi:<a href="https://doi.org/10.3390/ma14092286X">10.3390/ma14092286X</a>.
  short: B. Gröger, J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut,
    M. Gude, Materials 14 (2021) 2286.
date_created: 2022-03-28T12:51:22Z
date_updated: 2022-03-29T15:48:59Z
department:
- _id: '157'
doi: 10.3390/ma14092286X
intvolume: '        14'
language:
- iso: eng
page: '2286'
project:
- _id: '130'
  grant_number: '418701707'
  name: 'TRR 285: TRR 285'
- _id: '131'
  name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '137'
  name: 'TRR 285 – A03: TRR 285 - Subproject A03'
publication: Materials
status: public
title: Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel
  Joining Technologies
type: journal_article
user_id: '68518'
volume: 14
year: '2021'
...
---
_id: '25476'
abstract:
- lang: eng
  text: This study deals with the damage behavior of metallic materials by the application
    of different manufacturing processes and using different optical measurement methods
    to identify the crack initiation in the damage specimen. The study is intended
    to highlight the importance of considering manufacturing processes and optical
    measurement methods in a numerical simulation when analyzing the damage behavior
    of metallic materials. To describe the damage behavior of the material in the
    process chain simulations, it is important to calibrate the parameters of damage
    model more accurately. These parameters are determined using experimental investigation
    of desired damage specimens. In this regard, a selected damage specimen manufactured
    by different cutting processes is first experimentally and then numerically investigated.
    It is shown that the manufacturing process and the optical measurement methods
    influence the stress state analyzed in the numerical simulation.
article_type: original
author:
- first_name: Mortaza
  full_name: Otroshi, Mortaza
  id: '71269'
  last_name: Otroshi
  orcid: 0000-0002-8652-9209
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Aathavan
  full_name: Nesakumar, Aathavan
  last_name: Nesakumar
citation:
  ama: Otroshi M, Meschut G, Nesakumar A. The influence of manufacturing processes
    and optical measurement methods on the damage behavior of HX340LAD micro-alloyed
    steels. <i>Journal of Manufacturing Engineering</i>. 2021;16(3):70-76. doi:<a
    href="https://doi.org/10.37255/jme.v16i3pp070-076">https://doi.org/10.37255/jme.v16i3pp070-076</a>
  apa: Otroshi, M., Meschut, G., &#38; Nesakumar, A. (2021). The influence of manufacturing
    processes and optical measurement methods on the damage behavior of HX340LAD micro-alloyed
    steels. <i>Journal of Manufacturing Engineering</i>, <i>16</i>(3), 70–76. <a href="https://doi.org/10.37255/jme.v16i3pp070-076">https://doi.org/10.37255/jme.v16i3pp070-076</a>
  bibtex: '@article{Otroshi_Meschut_Nesakumar_2021, title={The influence of manufacturing
    processes and optical measurement methods on the damage behavior of HX340LAD micro-alloyed
    steels}, volume={16}, DOI={<a href="https://doi.org/10.37255/jme.v16i3pp070-076">https://doi.org/10.37255/jme.v16i3pp070-076</a>},
    number={3}, journal={Journal of Manufacturing Engineering}, author={Otroshi, Mortaza
    and Meschut, Gerson and Nesakumar, Aathavan}, year={2021}, pages={70–76} }'
  chicago: 'Otroshi, Mortaza, Gerson Meschut, and Aathavan Nesakumar. “The Influence
    of Manufacturing Processes and Optical Measurement Methods on the Damage Behavior
    of HX340LAD Micro-Alloyed Steels.” <i>Journal of Manufacturing Engineering</i>
    16, no. 3 (2021): 70–76. <a href="https://doi.org/10.37255/jme.v16i3pp070-076">https://doi.org/10.37255/jme.v16i3pp070-076</a>.'
  ieee: 'M. Otroshi, G. Meschut, and A. Nesakumar, “The influence of manufacturing
    processes and optical measurement methods on the damage behavior of HX340LAD micro-alloyed
    steels,” <i>Journal of Manufacturing Engineering</i>, vol. 16, no. 3, pp. 70–76,
    2021, doi: <a href="https://doi.org/10.37255/jme.v16i3pp070-076">https://doi.org/10.37255/jme.v16i3pp070-076</a>.'
  mla: Otroshi, Mortaza, et al. “The Influence of Manufacturing Processes and Optical
    Measurement Methods on the Damage Behavior of HX340LAD Micro-Alloyed Steels.”
    <i>Journal of Manufacturing Engineering</i>, vol. 16, no. 3, 2021, pp. 70–76,
    doi:<a href="https://doi.org/10.37255/jme.v16i3pp070-076">https://doi.org/10.37255/jme.v16i3pp070-076</a>.
  short: M. Otroshi, G. Meschut, A. Nesakumar, Journal of Manufacturing Engineering
    16 (2021) 70–76.
date_created: 2021-10-05T09:11:47Z
date_updated: 2022-04-25T07:48:07Z
department:
- _id: '157'
doi: https://doi.org/10.37255/jme.v16i3pp070-076
intvolume: '        16'
issue: '3'
keyword:
- Damage behaviour
- Stress triaxiality
- Manufacturing process and Optical measurement
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: http://smenec.org/index.php/1/article/view/187
oa: '1'
page: 70-76
publication: Journal of Manufacturing Engineering
publication_status: published
quality_controlled: '1'
status: public
title: The influence of manufacturing processes and optical measurement methods on
  the damage behavior of HX340LAD micro-alloyed steels
type: journal_article
user_id: '71269'
volume: 16
year: '2021'
...
---
_id: '21810'
author:
- first_name: Mortaza
  full_name: Otroshi, Mortaza
  id: '71269'
  last_name: Otroshi
  orcid: 0000-0002-8652-9209
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Christian Roman
  full_name: Bielak, Christian Roman
  id: '34782'
  last_name: Bielak
- first_name: Lukas
  full_name: Masendorf, Lukas
  last_name: Masendorf
- first_name: Alfons
  full_name: Esderts, Alfons
  last_name: Esderts
citation:
  ama: Otroshi M, Meschut G, Bielak CR, Masendorf L, Esderts A. Modeling of Stiffness
    Anisotropy in Simulation of Self-Piercing Riveted Components. <i>Key Engineering
    Materials</i>. 2021;883:35-40. doi:<a href="https://doi.org/10.4028/www.scientific.net/KEM.883.35">https://doi.org/10.4028/www.scientific.net/KEM.883.35</a>
  apa: Otroshi, M., Meschut, G., Bielak, C. R., Masendorf, L., &#38; Esderts, A. (2021).
    Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components.
    <i>Key Engineering Materials</i>, <i>883</i>, 35–40. <a href="https://doi.org/10.4028/www.scientific.net/KEM.883.35">https://doi.org/10.4028/www.scientific.net/KEM.883.35</a>
  bibtex: '@article{Otroshi_Meschut_Bielak_Masendorf_Esderts_2021, title={Modeling
    of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components}, volume={883},
    DOI={<a href="https://doi.org/10.4028/www.scientific.net/KEM.883.35">https://doi.org/10.4028/www.scientific.net/KEM.883.35</a>},
    journal={Key Engineering Materials}, publisher={Trans Tech Publications Ltd},
    author={Otroshi, Mortaza and Meschut, Gerson and Bielak, Christian Roman and Masendorf,
    Lukas and Esderts, Alfons}, year={2021}, pages={35–40} }'
  chicago: 'Otroshi, Mortaza, Gerson Meschut, Christian Roman Bielak, Lukas Masendorf,
    and Alfons Esderts. “Modeling of Stiffness Anisotropy in Simulation of Self-Piercing
    Riveted Components.” <i>Key Engineering Materials</i> 883 (2021): 35–40. <a href="https://doi.org/10.4028/www.scientific.net/KEM.883.35">https://doi.org/10.4028/www.scientific.net/KEM.883.35</a>.'
  ieee: 'M. Otroshi, G. Meschut, C. R. Bielak, L. Masendorf, and A. Esderts, “Modeling
    of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components,” <i>Key
    Engineering Materials</i>, vol. 883, pp. 35–40, 2021, doi: <a href="https://doi.org/10.4028/www.scientific.net/KEM.883.35">https://doi.org/10.4028/www.scientific.net/KEM.883.35</a>.'
  mla: Otroshi, Mortaza, et al. “Modeling of Stiffness Anisotropy in Simulation of
    Self-Piercing Riveted Components.” <i>Key Engineering Materials</i>, vol. 883,
    Trans Tech Publications Ltd, 2021, pp. 35–40, doi:<a href="https://doi.org/10.4028/www.scientific.net/KEM.883.35">https://doi.org/10.4028/www.scientific.net/KEM.883.35</a>.
  short: M. Otroshi, G. Meschut, C.R. Bielak, L. Masendorf, A. Esderts, Key Engineering
    Materials 883 (2021) 35–40.
date_created: 2021-04-27T08:33:03Z
date_updated: 2022-04-25T07:49:04Z
department:
- _id: '157'
doi: https://doi.org/10.4028/www.scientific.net/KEM.883.35
intvolume: '       883'
language:
- iso: eng
page: 35-40
publication: Key Engineering Materials
publication_identifier:
  issn:
  - 1662-9795
publication_status: published
publisher: Trans Tech Publications Ltd
quality_controlled: '1'
status: public
title: Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components
type: journal_article
user_id: '71269'
volume: 883
year: '2021'
...
---
_id: '26821'
author:
- first_name: Tim Michael
  full_name: Wibbeke, Tim Michael
  last_name: Wibbeke
- first_name: Auerélie
  full_name: Bartley, Auerélie
  last_name: Bartley
- first_name: Nick
  full_name: Chudalla, Nick
  id: '41235'
  last_name: Chudalla
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: 'Wibbeke TM, Bartley A, Chudalla N, Meschut G. Fügen und Trennen von Kfz-Karosseriestrukturen
    in Leichtbauweise. In: <i>Fahrzeug + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband
    Zu Den Würzburger Karosserie- Und Schadenstagen 22./23. Oktober 2021</i>. ; 2021.'
  apa: Wibbeke, T. M., Bartley, A., Chudalla, N., &#38; Meschut, G. (2021). Fügen
    und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise. <i>Fahrzeug + Karosserie
    Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie- Und Schadenstagen
    22./23. Oktober 2021</i>.
  bibtex: '@inproceedings{Wibbeke_Bartley_Chudalla_Meschut_2021, title={Fügen und
    Trennen von Kfz-Karosseriestrukturen in Leichtbauweise}, booktitle={Fahrzeug +
    Karosserie und kfz-betrieb (Hrsg,); Tagungsband zu den Würzburger Karosserie-
    und Schadenstagen 22./23. Oktober 2021}, author={Wibbeke, Tim Michael and Bartley,
    Auerélie and Chudalla, Nick and Meschut, Gerson}, year={2021} }'
  chicago: Wibbeke, Tim Michael, Auerélie Bartley, Nick Chudalla, and Gerson Meschut.
    “Fügen Und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise.” In <i>Fahrzeug
    + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie-
    Und Schadenstagen 22./23. Oktober 2021</i>, 2021.
  ieee: T. M. Wibbeke, A. Bartley, N. Chudalla, and G. Meschut, “Fügen und Trennen
    von Kfz-Karosseriestrukturen in Leichtbauweise,” 2021.
  mla: Wibbeke, Tim Michael, et al. “Fügen Und Trennen von Kfz-Karosseriestrukturen
    in Leichtbauweise.” <i>Fahrzeug + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband
    Zu Den Würzburger Karosserie- Und Schadenstagen 22./23. Oktober 2021</i>, 2021.
  short: 'T.M. Wibbeke, A. Bartley, N. Chudalla, G. Meschut, in: Fahrzeug + Karosserie
    Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie- Und Schadenstagen
    22./23. Oktober 2021, 2021.'
date_created: 2021-10-25T12:05:22Z
date_updated: 2022-04-25T11:24:34Z
department:
- _id: '43'
- _id: '157'
language:
- iso: eng
publication: Fahrzeug + Karosserie und kfz-betrieb (Hrsg,); Tagungsband zu den Würzburger
  Karosserie- und Schadenstagen 22./23. Oktober 2021
status: public
title: Fügen und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise
type: conference
user_id: '41235'
year: '2021'
...
---
_id: '21814'
author:
- first_name: Benjamin
  full_name: Gröger, Benjamin
  last_name: Gröger
- first_name: Juliane
  full_name: Troschitz, Juliane
  last_name: Troschitz
- first_name: Julian
  full_name: Vorderbrüggen, Julian
  id: '36235'
  last_name: Vorderbrüggen
- first_name: Christian
  full_name: Vogel, Christian
  last_name: Vogel
- first_name: Robert
  full_name: Kupfer, Robert
  last_name: Kupfer
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Maik
  full_name: Gude, Maik
  last_name: Gude
citation:
  ama: Gröger B, Troschitz J, Vorderbrüggen J, et al. Clinching of Thermoplastic Composites
    and Metals—A Comparison of Three Novel Joining Technologies. <i>Materials</i>.
    Published online 2021. doi:<a href="https://doi.org/ 10.3390/ma14092286">https://doi.org/
    10.3390/ma14092286</a>
  apa: Gröger, B., Troschitz, J., Vorderbrüggen, J., Vogel, C., Kupfer, R., Meschut,
    G., &#38; Gude, M. (2021). Clinching of Thermoplastic Composites and Metals—A
    Comparison of Three Novel Joining Technologies. <i>Materials</i>. <a href="https://doi.org/
    10.3390/ma14092286">https://doi.org/ 10.3390/ma14092286</a>
  bibtex: '@article{Gröger_Troschitz_Vorderbrüggen_Vogel_Kupfer_Meschut_Gude_2021,
    title={Clinching of Thermoplastic Composites and Metals—A Comparison of Three
    Novel Joining Technologies}, DOI={<a href="https://doi.org/ 10.3390/ma14092286">https://doi.org/
    10.3390/ma14092286</a>}, journal={Materials}, publisher={MDPI}, author={Gröger,
    Benjamin and Troschitz, Juliane and Vorderbrüggen, Julian and Vogel, Christian
    and Kupfer, Robert and Meschut, Gerson and Gude, Maik}, year={2021} }'
  chicago: Gröger, Benjamin, Juliane Troschitz, Julian Vorderbrüggen, Christian Vogel,
    Robert Kupfer, Gerson Meschut, and Maik Gude. “Clinching of Thermoplastic Composites
    and Metals—A Comparison of Three Novel Joining Technologies.” <i>Materials</i>,
    2021. <a href="https://doi.org/ 10.3390/ma14092286">https://doi.org/ 10.3390/ma14092286</a>.
  ieee: 'B. Gröger <i>et al.</i>, “Clinching of Thermoplastic Composites and Metals—A
    Comparison of Three Novel Joining Technologies,” <i>Materials</i>, 2021, doi:
    <a href="https://doi.org/ 10.3390/ma14092286">https://doi.org/ 10.3390/ma14092286</a>.'
  mla: Gröger, Benjamin, et al. “Clinching of Thermoplastic Composites and Metals—A
    Comparison of Three Novel Joining Technologies.” <i>Materials</i>, MDPI, 2021,
    doi:<a href="https://doi.org/ 10.3390/ma14092286">https://doi.org/ 10.3390/ma14092286</a>.
  short: B. Gröger, J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut,
    M. Gude, Materials (2021).
date_created: 2021-04-28T13:47:18Z
date_updated: 2022-04-25T14:46:16Z
department:
- _id: '157'
doi: https://doi.org/ 10.3390/ma14092286
language:
- iso: eng
publication: Materials
publisher: MDPI
quality_controlled: '1'
status: public
title: Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel
  Joining Technologies
type: journal_article
user_id: '36235'
year: '2021'
...
---
_id: '28568'
abstract:
- lang: eng
  text: <jats:title>Abstract</jats:title><jats:p>Recent developments in automotive
    and aircraft industry towards a multi-material design pose challenges for modern
    joining technologies due to different mechanical properties and material compositions
    of various materials such as composites and metals. Therefore, mechanical joining
    technologies like clinching are in the focus of current research activities. For
    multi-material joints of metals and thermoplastic composites thermally assisted
    clinching processes with advanced tool concepts are well developed. The material-specific
    properties of fibre-reinforced thermoplastics have a significant influence on
    the joining process and the resulting material structure in the joining zone.
    For this reason, it is important to investigate these influences in detail and
    to understand the phenomena occurring during the joining process. Additionally,
    this provides the basis for a validation of a numerical simulation of such joining
    processes. In this paper, the material structure in a joint resulting from a thermally
    assisted clinching process is investigated. The joining partners are an aluminium
    sheet and a thermoplastic composite (organo sheet). Using computed tomography
    enables a three-dimensional investigation that allows a detailed analysis of the
    phenomena in different joining stages and in the material structure of the finished
    joint. Consequently, this study provides a more detailed understanding of the
    material behavior of thermoplastic composites during thermally assisted clinching.</jats:p>
author:
- first_name: Benjamin
  full_name: Gröger, Benjamin
  last_name: Gröger
- first_name: Daniel
  full_name: Köhler, Daniel
  last_name: Köhler
- first_name: Julian
  full_name: Vorderbrüggen, Julian
  id: '36235'
  last_name: Vorderbrüggen
- first_name: Juliane
  full_name: Troschitz, Juliane
  last_name: Troschitz
- first_name: Robert
  full_name: Kupfer, Robert
  last_name: Kupfer
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Maik
  full_name: Gude, Maik
  last_name: Gude
citation:
  ama: Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation
    of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic
    sheets. <i>Production Engineering</i>. Published online 2021. doi:<a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>
  apa: Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut,
    G., &#38; Gude, M. (2021). Computed tomography investigation of the material structure
    in clinch joints in aluminium fibre-reinforced thermoplastic sheets. <i>Production
    Engineering</i>. <a href="https://doi.org/10.1007/s11740-021-01091-x">https://doi.org/10.1007/s11740-021-01091-x</a>
  bibtex: '@article{Gröger_Köhler_Vorderbrüggen_Troschitz_Kupfer_Meschut_Gude_2021,
    title={Computed tomography investigation of the material structure in clinch joints
    in aluminium fibre-reinforced thermoplastic sheets}, DOI={<a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>},
    journal={Production Engineering}, author={Gröger, Benjamin and Köhler, Daniel
    and Vorderbrüggen, Julian and Troschitz, Juliane and Kupfer, Robert and Meschut,
    Gerson and Gude, Maik}, year={2021} }'
  chicago: Gröger, Benjamin, Daniel Köhler, Julian Vorderbrüggen, Juliane Troschitz,
    Robert Kupfer, Gerson Meschut, and Maik Gude. “Computed Tomography Investigation
    of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic
    Sheets.” <i>Production Engineering</i>, 2021. <a href="https://doi.org/10.1007/s11740-021-01091-x">https://doi.org/10.1007/s11740-021-01091-x</a>.
  ieee: 'B. Gröger <i>et al.</i>, “Computed tomography investigation of the material
    structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,”
    <i>Production Engineering</i>, 2021, doi: <a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>.'
  mla: Gröger, Benjamin, et al. “Computed Tomography Investigation of the Material
    Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.”
    <i>Production Engineering</i>, 2021, doi:<a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>.
  short: B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut,
    M. Gude, Production Engineering (2021).
date_created: 2021-12-10T14:25:29Z
date_updated: 2022-04-25T14:48:52Z
department:
- _id: '157'
doi: 10.1007/s11740-021-01091-x
language:
- iso: eng
publication: Production Engineering
publication_identifier:
  issn:
  - 0944-6524
  - 1863-7353
publication_status: published
quality_controlled: '1'
status: public
title: Computed tomography investigation of the material structure in clinch joints
  in aluminium fibre-reinforced thermoplastic sheets
type: journal_article
user_id: '36235'
year: '2021'
...
---
_id: '21802'
alternative_title:
- Langzeitprognose Klebverbindungen
author:
- first_name: Sascha
  full_name: Sander, Sascha
  id: '23175'
  last_name: Sander
- first_name: Dominik
  full_name: Teutenberg, Dominik
  id: '537'
  last_name: Teutenberg
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Anton
  full_name: Matzenmiller, Anton
  last_name: Matzenmiller
citation:
  ama: 'Sander S, Teutenberg D, Meschut G, Matzenmiller A. Methodenentwicklung zur
    Langzeitprognose von Klebverbindungen bei kombinierter Temperatur- und Medieneinwirkung.
    In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., ed. <i>21.
    Kolloquium Gemeinsame Forschung in der Klebtechnik</i>. ; 2021.'
  apa: Sander, S., Teutenberg, D., Meschut, G., &#38; Matzenmiller, A. (2021). Methodenentwicklung
    zur Langzeitprognose von Klebverbindungen bei kombinierter Temperatur- und Medieneinwirkung.
    In DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.),
    <i>21. Kolloquium Gemeinsame Forschung in der Klebtechnik</i>.
  bibtex: '@inproceedings{Sander_Teutenberg_Meschut_Matzenmiller_2021, title={Methodenentwicklung
    zur Langzeitprognose von Klebverbindungen bei kombinierter Temperatur- und Medieneinwirkung},
    booktitle={21. Kolloquium Gemeinsame Forschung in der Klebtechnik}, author={Sander,
    Sascha and Teutenberg, Dominik and Meschut, Gerson and Matzenmiller, Anton}, editor={DECHEMA,
    Gesellschaft für Chemische Technik und Biotechnologie e.V.}, year={2021} }'
  chicago: Sander, Sascha, Dominik Teutenberg, Gerson Meschut, and Anton Matzenmiller.
    “Methodenentwicklung zur Langzeitprognose von Klebverbindungen bei kombinierter
    Temperatur- und Medieneinwirkung.” In <i>21. Kolloquium Gemeinsame Forschung in
    der Klebtechnik</i>, edited by DECHEMA, Gesellschaft für Chemische Technik und
    Biotechnologie e.V., 2021.
  ieee: S. Sander, D. Teutenberg, G. Meschut, and A. Matzenmiller, “Methodenentwicklung
    zur Langzeitprognose von Klebverbindungen bei kombinierter Temperatur- und Medieneinwirkung,”
    in <i>21. Kolloquium Gemeinsame Forschung in der Klebtechnik</i>, Online Konferenz,
    2021.
  mla: Sander, Sascha, et al. “Methodenentwicklung zur Langzeitprognose von Klebverbindungen
    bei kombinierter Temperatur- und Medieneinwirkung.” <i>21. Kolloquium Gemeinsame
    Forschung in der Klebtechnik</i>, edited by DECHEMA, Gesellschaft für Chemische
    Technik und Biotechnologie e.V., 2021.
  short: 'S. Sander, D. Teutenberg, G. Meschut, A. Matzenmiller, in: DECHEMA, Gesellschaft
    für Chemische Technik und Biotechnologie e.V. (Ed.), 21. Kolloquium Gemeinsame
    Forschung in der Klebtechnik, 2021.'
conference:
  end_date: 2021-03-03
  location: Online Konferenz
  name: 21. Kolloquium Gemeinsame Forschung in der Klebtechnik, 2021
  start_date: 2021-03-02
corporate_editor:
- DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
date_created: 2021-04-26T13:30:06Z
date_updated: 2022-01-14T08:06:55Z
department:
- _id: '157'
language:
- iso: ger
publication: 21. Kolloquium Gemeinsame Forschung in der Klebtechnik
publication_status: published
status: public
title: Methodenentwicklung zur Langzeitprognose von Klebverbindungen bei kombinierter
  Temperatur- und Medieneinwirkung
type: conference
user_id: '23175'
year: '2021'
...
---
_id: '31499'
author:
- first_name: Viktoria
  full_name: Olfert, Viktoria
  id: '5974'
  last_name: Olfert
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: David
  full_name: Hein, David
  id: '7728'
  last_name: Hein
- first_name: Philip
  full_name: Rochel, Philip
  last_name: Rochel
- first_name: Silke
  full_name: Sommer, Silke
  last_name: Sommer
citation:
  ama: 'Olfert V, Meschut G, Hein D, Rochel P, Sommer S. Einfluss fertigungsbedingter
    Toleranzen auf das Versagens- und Verformungsverhalten mechanisch gefügter Verbindungen
    unter Crashbelastung. In: ; 2021.'
  apa: Olfert, V., Meschut, G., Hein, D., Rochel, P., &#38; Sommer, S. (2021). <i>Einfluss
    fertigungsbedingter Toleranzen auf das Versagens- und Verformungsverhalten mechanisch
    gefügter Verbindungen unter Crashbelastung</i>. 11. Fügetechnisches Gemeinschaftskolloquium,
    Dresden.
  bibtex: '@inproceedings{Olfert_Meschut_Hein_Rochel_Sommer_2021, title={Einfluss
    fertigungsbedingter Toleranzen auf das Versagens- und Verformungsverhalten mechanisch
    gefügter Verbindungen unter Crashbelastung}, author={Olfert, Viktoria and Meschut,
    Gerson and Hein, David and Rochel, Philip and Sommer, Silke}, year={2021} }'
  chicago: Olfert, Viktoria, Gerson Meschut, David Hein, Philip Rochel, and Silke
    Sommer. “Einfluss fertigungsbedingter Toleranzen auf das Versagens- und Verformungsverhalten
    mechanisch gefügter Verbindungen unter Crashbelastung,” 2021.
  ieee: V. Olfert, G. Meschut, D. Hein, P. Rochel, and S. Sommer, “Einfluss fertigungsbedingter
    Toleranzen auf das Versagens- und Verformungsverhalten mechanisch gefügter Verbindungen
    unter Crashbelastung,” presented at the 11. Fügetechnisches Gemeinschaftskolloquium,
    Dresden, 2021.
  mla: Olfert, Viktoria, et al. <i>Einfluss fertigungsbedingter Toleranzen auf das
    Versagens- und Verformungsverhalten mechanisch gefügter Verbindungen unter Crashbelastung</i>.
    2021.
  short: 'V. Olfert, G. Meschut, D. Hein, P. Rochel, S. Sommer, in: 2021.'
conference:
  end_date: 2021-12-08
  location: Dresden
  name: 11. Fügetechnisches Gemeinschaftskolloquium
  start_date: 2021-12-07
date_created: 2022-05-30T08:50:00Z
date_updated: 2022-05-30T08:52:02Z
department:
- _id: '157'
language:
- iso: ger
publication_status: published
status: public
title: Einfluss fertigungsbedingter Toleranzen auf das Versagens- und Verformungsverhalten
  mechanisch gefügter Verbindungen unter Crashbelastung
type: conference_abstract
user_id: '5974'
year: '2021'
...
---
_id: '30698'
author:
- first_name: B.
  full_name: Gröger, B.
  last_name: Gröger
- first_name: D.
  full_name: Köhler, D.
  last_name: Köhler
- first_name: J.
  full_name: Vorderbrüggen, J.
  last_name: Vorderbrüggen
- first_name: J.
  full_name: Troschitz, J.
  last_name: Troschitz
- first_name: R.
  full_name: Kupfer, R.
  last_name: Kupfer
- first_name: G.
  full_name: Meschut, G.
  last_name: Meschut
- first_name: M.
  full_name: Gude, M.
  last_name: Gude
citation:
  ama: Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation
    of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic
    sheets. <i>Production Engineering</i>. Published online 2021. doi:<a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>
  apa: Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut,
    G., &#38; Gude, M. (2021). Computed tomography investigation of the material structure
    in clinch joints in aluminium fibre-reinforced thermoplastic sheets. <i>Production
    Engineering</i>. <a href="https://doi.org/10.1007/s11740-021-01091-x">https://doi.org/10.1007/s11740-021-01091-x</a>
  bibtex: '@article{Gröger_Köhler_Vorderbrüggen_Troschitz_Kupfer_Meschut_Gude_2021,
    title={Computed tomography investigation of the material structure in clinch joints
    in aluminium fibre-reinforced thermoplastic sheets}, DOI={<a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>},
    journal={Production Engineering}, author={Gröger, B. and Köhler, D. and Vorderbrüggen,
    J. and Troschitz, J. and Kupfer, R. and Meschut, G. and Gude, M.}, year={2021}
    }'
  chicago: Gröger, B., D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut,
    and M. Gude. “Computed Tomography Investigation of the Material Structure in Clinch
    Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” <i>Production Engineering</i>,
    2021. <a href="https://doi.org/10.1007/s11740-021-01091-x">https://doi.org/10.1007/s11740-021-01091-x</a>.
  ieee: 'B. Gröger <i>et al.</i>, “Computed tomography investigation of the material
    structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,”
    <i>Production Engineering</i>, 2021, doi: <a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>.'
  mla: Gröger, B., et al. “Computed Tomography Investigation of the Material Structure
    in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” <i>Production
    Engineering</i>, 2021, doi:<a href="https://doi.org/10.1007/s11740-021-01091-x">10.1007/s11740-021-01091-x</a>.
  short: B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut,
    M. Gude, Production Engineering (2021).
date_created: 2022-03-29T09:15:36Z
date_updated: 2023-01-02T11:18:51Z
department:
- _id: '157'
- _id: '630'
doi: 10.1007/s11740-021-01091-x
language:
- iso: eng
project:
- _id: '130'
  grant_number: '418701707'
  name: 'TRR 285: TRR 285'
- _id: '131'
  name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '137'
  name: 'TRR 285 – A03: TRR 285 - Subproject A03'
- _id: '133'
  name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
  name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Production Engineering
status: public
title: Computed tomography investigation of the material structure in clinch joints
  in aluminium fibre-reinforced thermoplastic sheets
type: journal_article
user_id: '14931'
year: '2021'
...
---
_id: '35512'
author:
- first_name: Viktor
  full_name: Haak, Viktor
  id: '60398'
  last_name: Haak
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
- first_name: Uwe
  full_name: Reisgen, Uwe
  last_name: Reisgen
- first_name: Alexander
  full_name: Schiebahn, Alexander
  last_name: Schiebahn
- first_name: Maike
  full_name: Epperlein, Maike
  last_name: Epperlein
citation:
  ama: 'Haak V, Meschut G, Reisgen U, Schiebahn A, Epperlein M. Einseitiges Widerstandselementschweißen
    für die stahlintensive Mischbauweise (eWES). In: <i>11. Fügetechnisches Gemeinschaftskolloquium</i>.
    ; 2021.'
  apa: Haak, V., Meschut, G., Reisgen, U., Schiebahn, A., &#38; Epperlein, M. (2021).
    Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise (eWES).
    <i>11. Fügetechnisches Gemeinschaftskolloquium</i>. 11. Fügetechnisches Gemeinschaftskolloquium,
    Dresden.
  bibtex: '@inproceedings{Haak_Meschut_Reisgen_Schiebahn_Epperlein_2021, title={Einseitiges
    Widerstandselementschweißen für die stahlintensive Mischbauweise (eWES)}, booktitle={11.
    Fügetechnisches Gemeinschaftskolloquium}, author={Haak, Viktor and Meschut, Gerson
    and Reisgen, Uwe and Schiebahn, Alexander and Epperlein, Maike}, year={2021} }'
  chicago: Haak, Viktor, Gerson Meschut, Uwe Reisgen, Alexander Schiebahn, and Maike
    Epperlein. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise
    (eWES).” In <i>11. Fügetechnisches Gemeinschaftskolloquium</i>, 2021.
  ieee: V. Haak, G. Meschut, U. Reisgen, A. Schiebahn, and M. Epperlein, “Einseitiges
    Widerstandselementschweißen für die stahlintensive Mischbauweise (eWES),” presented
    at the 11. Fügetechnisches Gemeinschaftskolloquium, Dresden, 2021.
  mla: Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive
    Mischbauweise (eWES).” <i>11. Fügetechnisches Gemeinschaftskolloquium</i>, 2021.
  short: 'V. Haak, G. Meschut, U. Reisgen, A. Schiebahn, M. Epperlein, in: 11. Fügetechnisches
    Gemeinschaftskolloquium, 2021.'
conference:
  end_date: 2021-12-08
  location: Dresden
  name: 11. Fügetechnisches Gemeinschaftskolloquium
  start_date: 2021-12-07
date_created: 2023-01-09T15:00:51Z
date_updated: 2023-01-09T15:07:31Z
department:
- _id: '157'
language:
- iso: ger
publication: 11. Fügetechnisches Gemeinschaftskolloquium
status: public
title: Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise
  (eWES)
type: conference_abstract
user_id: '60398'
year: '2021'
...
---
_id: '50598'
author:
- first_name: Felix
  full_name: Beule, Felix
  id: '66192'
  last_name: Beule
- first_name: Dominik
  full_name: Teutenberg, Dominik
  id: '537'
  last_name: Teutenberg
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: 'Beule F, Teutenberg D, Meschut G. Untersuchung des Einflusses von Relativverschiebungen
    während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen.
    In: ; 2021.'
  apa: Beule, F., Teutenberg, D., &#38; Meschut, G. (2021). <i>Untersuchung des Einflusses
    von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften
    von Klebverbindungen</i>. 12. Doktorandenseminar Klebtechnik , Paderborn.
  bibtex: '@inproceedings{Beule_Teutenberg_Meschut_2021, title={Untersuchung des Einflusses
    von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften
    von Klebverbindungen}, author={Beule, Felix and Teutenberg, Dominik and Meschut,
    Gerson}, year={2021} }'
  chicago: Beule, Felix, Dominik Teutenberg, and Gerson Meschut. “Untersuchung Des
    Einflusses von Relativverschiebungen Während Der Aushärtung Auf Die Mechanischen
    Eigenschaften von Klebverbindungen,” 2021.
  ieee: F. Beule, D. Teutenberg, and G. Meschut, “Untersuchung des Einflusses von
    Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften
    von Klebverbindungen,” presented at the 12. Doktorandenseminar Klebtechnik , Paderborn,
    2021.
  mla: Beule, Felix, et al. <i>Untersuchung Des Einflusses von Relativverschiebungen
    Während Der Aushärtung Auf Die Mechanischen Eigenschaften von Klebverbindungen</i>.
    2021.
  short: 'F. Beule, D. Teutenberg, G. Meschut, in: 2021.'
conference:
  end_date: 2021-09-22
  location: Paderborn
  name: '12. Doktorandenseminar Klebtechnik '
  start_date: 2021-09-21
date_created: 2024-01-18T11:34:51Z
date_updated: 2024-01-18T11:35:01Z
department:
- _id: '157'
language:
- iso: eng
status: public
title: Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung
  auf die mechanischen Eigenschaften von Klebverbindungen
type: conference
user_id: '66192'
year: '2021'
...
---
_id: '21811'
abstract:
- lang: eng
  text: 'In order to reduce the fuel consumption and consequently the greenhouse emissions,
    the automotive industry is implementing lightweight constructions in the body
    in white production. As a result, the use of aluminum alloys is continuously increasing.
    Due to poor weldability of aluminum in combination with other materials, mechanical
    joining technologies like clinching are increasingly used. In order to predict
    relevant characteristics of clinched joints and to ensure the reliability of the
    process, it is simulated numerically during product development processes. In
    this regard the predictive accuracy of the simulated process highly depends on
    the implemented friction model. In particular, the frictional behavior between
    the sheet metals affects the geometrical formation of the clinched joint significantly.
    This paper presents a testing method, which enables to determine the frictional
    coefficients between sheet metal materials for the simulation of clinching processes.
    For this purpose, the correlation of interface pressure and the relative velocity
    between aluminum sheets in clinching processes is investigated using numerical
    simulation. Furthermore, the developed testing method focuses on the specimen
    geometry as well as the reproduction of the occurring friction conditions between
    two sheet metal materials in clinching processes. Based on a methodical approach
    the test setup is explained and the functionality of the method is proven by experimental
    tests using sheet metal material EN AW6014. '
author:
- first_name: Moritz Sebastian
  full_name: Rossel, Moritz Sebastian
  id: '44503'
  last_name: Rossel
- first_name: Max
  full_name: Böhnke, Max
  id: '45779'
  last_name: Böhnke
- first_name: Christian Roman
  full_name: Bielak, Christian Roman
  id: '34782'
  last_name: Bielak
- first_name: Mathias
  full_name: Bobbert, Mathias
  id: '7850'
  last_name: Bobbert
- first_name: Gerson
  full_name: Meschut, Gerson
  id: '32056'
  last_name: Meschut
  orcid: 0000-0002-2763-1246
citation:
  ama: 'Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method
    for the Identification of Friction Coefficients in Sheet Metal Materials for the
    Numerical Simulation of Clinching Processes. In: <i>Sheet Metal 2021</i>. Vol
    883. Key Engineering Materials. Trans Tech Publications Ltd; 2021:81-88. doi:<a
    href="https://doi.org/10.4028/www.scientific.net/KEM.883.81">10.4028/www.scientific.net/KEM.883.81</a>'
  apa: Rossel, M. S., Böhnke, M., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2021).
    Development of a Method for the Identification of Friction Coefficients in Sheet
    Metal Materials for the Numerical Simulation of Clinching Processes. <i>Sheet
    Metal 2021</i>, <i>883</i>, 81–88. <a href="https://doi.org/10.4028/www.scientific.net/KEM.883.81">https://doi.org/10.4028/www.scientific.net/KEM.883.81</a>
  bibtex: '@inproceedings{Rossel_Böhnke_Bielak_Bobbert_Meschut_2021, series={Key Engineering
    Materials}, title={Development of a Method for the Identification of Friction
    Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching
    Processes}, volume={883}, DOI={<a href="https://doi.org/10.4028/www.scientific.net/KEM.883.81">10.4028/www.scientific.net/KEM.883.81</a>},
    booktitle={Sheet Metal 2021}, publisher={Trans Tech Publications Ltd}, author={Rossel,
    Moritz Sebastian and Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias
    and Meschut, Gerson}, year={2021}, pages={81–88}, collection={Key Engineering
    Materials} }'
  chicago: Rossel, Moritz Sebastian, Max Böhnke, Christian Roman Bielak, Mathias Bobbert,
    and Gerson Meschut. “Development of a Method for the Identification of Friction
    Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching
    Processes.” In <i>Sheet Metal 2021</i>, 883:81–88. Key Engineering Materials.
    Trans Tech Publications Ltd, 2021. <a href="https://doi.org/10.4028/www.scientific.net/KEM.883.81">https://doi.org/10.4028/www.scientific.net/KEM.883.81</a>.
  ieee: 'M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development
    of a Method for the Identification of Friction Coefficients in Sheet Metal Materials
    for the Numerical Simulation of Clinching Processes,” in <i>Sheet Metal 2021</i>,
    2021, vol. 883, pp. 81–88, doi: <a href="https://doi.org/10.4028/www.scientific.net/KEM.883.81">10.4028/www.scientific.net/KEM.883.81</a>.'
  mla: Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification
    of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation
    of Clinching Processes.” <i>Sheet Metal 2021</i>, vol. 883, Trans Tech Publications
    Ltd, 2021, pp. 81–88, doi:<a href="https://doi.org/10.4028/www.scientific.net/KEM.883.81">10.4028/www.scientific.net/KEM.883.81</a>.
  short: 'M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Sheet Metal
    2021, Trans Tech Publications Ltd, 2021, pp. 81–88.'
date_created: 2021-04-28T06:12:54Z
date_updated: 2024-03-11T08:15:08Z
department:
- _id: '157'
doi: 10.4028/www.scientific.net/KEM.883.81
intvolume: '       883'
keyword:
- Tribology
- Sheet Metal
- Simulation
language:
- iso: eng
page: 81-88
publication: Sheet Metal 2021
publication_status: published
publisher: Trans Tech Publications Ltd
quality_controlled: '1'
series_title: Key Engineering Materials
status: public
title: Development of a Method for the Identification of Friction Coefficients in
  Sheet Metal Materials for the Numerical Simulation of Clinching Processes
type: conference
user_id: '45779'
volume: 883
year: '2021'
...