@article{24565,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Laser surface treatment of metals is one option to improve their properties for adhesive bonding. In this paper, a pulsed YVO4 Laser source with a wavelength of 1064 nm and a maximum power of 25 W was utilized to increase the surface area of the steel HCT490X in order to improve its bonding properties with a carbon fibre reinforced polymer (CFRP). Investigated was the influence of the scanning speed of the laser source on the bonding properties. For this purpose, the steel surfaces were ablated at a scanning speed between 1500 and 4500 mm/s. Afterwards the components were bonded with the adhesive HexBond™ 677. After lap shear tests were carried out on the specimen, the surfaces were inspected using scanning electron microscopy (SEM). The experiments revealed that the bonding quality can be improved with a high scanning speed, even when the surface is not completely ablated.</jats:p>}},
  author       = {{Voswinkel, Dietrich and Kloidt, D. and Grydin, Olexandr and Schaper, Mirko}},
  issn         = {{0944-6524}},
  journal      = {{Production Engineering}},
  number       = {{2}},
  pages        = {{263--270}},
  title        = {{{Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials}}},
  doi          = {{10.1007/s11740-020-01006-2}},
  volume       = {{15}},
  year         = {{2021}},
}

@article{24566,
  author       = {{Engelkemeier, Katja and Sun, Aijia and Voswinkel, Dietrich and Grydin, Olexandr and Schaper, Mirko and Bremser, Wolfgang}},
  issn         = {{2196-0216}},
  journal      = {{ChemElectroChem}},
  pages        = {{2155--2168}},
  publisher    = {{Wiley}},
  title        = {{{Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte}}},
  doi          = {{10.1002/celc.202100216}},
  year         = {{2021}},
}

@article{23897,
  author       = {{Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}},
  issn         = {{0921-5093}},
  journal      = {{Materials Science and Engineering: A}},
  title        = {{{Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance}}},
  doi          = {{10.1016/j.msea.2021.141662}},
  year         = {{2021}},
}

@article{23911,
  author       = {{Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}},
  issn         = {{0142-1123}},
  journal      = {{International Journal of Fatigue}},
  title        = {{{Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy}}},
  doi          = {{10.1016/j.ijfatigue.2021.106498}},
  year         = {{2021}},
}

@article{24088,
  author       = {{Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}},
  issn         = {{2214-8604}},
  journal      = {{Additive Manufacturing}},
  title        = {{{Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study}}},
  doi          = {{10.1016/j.addma.2021.102087}},
  year         = {{2021}},
}

@article{23803,
  author       = {{Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}},
  journal      = {{Materials Data for Smart Forming Technologies}},
  location     = {{Freiberg}},
  title        = {{{Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods }}},
  year         = {{2021}},
}

@proceedings{58117,
  editor       = {{Paschke, Hanno and Lauth, Martin and Schaper, Mirko and Brückner, Tristan and Thewes, Alexander}},
  location     = {{Virtual Conference}},
  title        = {{{Surface modifications reducing the adhesion of aluminum in twin roll casting applications}}},
  year         = {{2021}},
}

@article{41508,
  author       = {{Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}},
  issn         = {{0921-5093}},
  journal      = {{Materials Science and Engineering: A}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science}},
  publisher    = {{Elsevier BV}},
  title        = {{{Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks}}},
  doi          = {{10.1016/j.msea.2021.142312}},
  volume       = {{831}},
  year         = {{2021}},
}

@article{27700,
  author       = {{Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}},
  issn         = {{0921-5093}},
  journal      = {{Materials Science and Engineering: A}},
  publisher    = {{Elsevier}},
  title        = {{{Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks}}},
  doi          = {{10.1016/j.msea.2021.142312}},
  year         = {{2021}},
}

@article{23898,
  author       = {{Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Haase, Michael and Gierse, Jan and Zimmer, Detmar and Tröster, Thomas and Schaper, Mirko}},
  issn         = {{0924-0136}},
  journal      = {{Journal of Materials Processing Technology}},
  title        = {{{Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section}}},
  doi          = {{10.1016/j.jmatprotec.2021.117183}},
  year         = {{2021}},
}

@inproceedings{24006,
  author       = {{Weiß, Deborah and Schramm, Britta and Neuser, Moritz and Grydin, Olexandr and Kullmer, Gunter}},
  location     = {{Bremen}},
  pages        = {{231--240}},
  title        = {{{Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie}}},
  doi          = {{10.48447/BR-2021-025}},
  volume       = {{DVM-Bericht 253}},
  year         = {{2021}},
}

@inproceedings{24567,
  author       = {{Krivská, Barbora and Šlapáková, Michaela and Kihoulou, Martin and Králík, Rostislav and Bajtošová, Lucia and Cieslar, Miroslav and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}},
  booktitle    = {{Proc. 20th Conference of Czech and Slovak Physicists}},
  location     = {{Prague}},
  pages        = {{153--154}},
  title        = {{{Interdiffusion in aluminum-steel clad strip}}},
  year         = {{2020}},
}

@inproceedings{24569,
  author       = {{KŘIVSKÁ, Barbora and ŠLAPÁKOVÁ, Michaela and Grydin, Olexandr and CIESLAR, Miroslav}},
  booktitle    = {{METAL 2020 Conference Proeedings}},
  title        = {{{Aluminum-steel clad material prepared by twin-roll casting}}},
  doi          = {{10.37904/metal.2020.3595}},
  year         = {{2020}},
}

@article{24570,
  author       = {{Frolov, Yaroslav and Haranich, Yurii and Bobukh, Olexandr and Remez, Oleg and Voswinkel, Dietrich and Grydin, Olexandr}},
  issn         = {{1526-6125}},
  journal      = {{Journal of Manufacturing Processes}},
  pages        = {{857--867}},
  title        = {{{Deformation of expanded steel mesh inlay inside aluminum matrix during the roll bonding}}},
  doi          = {{10.1016/j.jmapro.2020.08.049}},
  volume       = {{58}},
  year         = {{2020}},
}

@article{24574,
  author       = {{Bondarenko, Serhii and Grydin, Olexandr and Frolov, Yaroslav and Kuzmina, Olga and Bobukh, Olexandr}},
  journal      = {{Modern Problems of Metallurgy – Scientific Bulletin}},
  pages        = {{91--101}},
  title        = {{{Cold rolling of pre-profiled strips from aluminum alloy EN AW-1050}}},
  volume       = {{23}},
  year         = {{2020}},
}

@inbook{23801,
  author       = {{Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}},
  booktitle    = {{The Minerals, Metals & Materials Series}},
  issn         = {{2367-1181}},
  publisher    = {{Springer}},
  title        = {{{Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts}}},
  doi          = {{10.1007/978-3-030-36628-5_7}},
  year         = {{2020}},
}

@article{24563,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Laser surface treatment of metals is one option to improve their properties for adhesive bonding. In this paper, a pulsed YVO4 Laser source with a wavelength of 1064 nm and a maximum power of 25 W was utilized to increase the surface area of the steel HCT490X in order to improve its bonding properties with a carbon fibre reinforced polymer (CFRP). Investigated was the influence of the scanning speed of the laser source on the bonding properties. For this purpose, the steel surfaces were ablated at a scanning speed between 1500 and 4500 mm/s. Afterwards the components were bonded with the adhesive HexBond™ 677. After lap shear tests were carried out on the specimen, the surfaces were inspected using scanning electron microscopy (SEM). The experiments revealed that the bonding quality can be improved with a high scanning speed, even when the surface is not completely ablated.</jats:p>}},
  author       = {{Voswinkel, D. and Kloidt, D. and Grydin, O. and Schaper, M.}},
  issn         = {{0944-6524}},
  journal      = {{Production Engineering}},
  pages        = {{263--270}},
  title        = {{{Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials}}},
  doi          = {{10.1007/s11740-020-01006-2}},
  year         = {{2020}},
}

@phdthesis{42012,
  author       = {{Andreiev, Anatolii}},
  isbn         = {{9783751900089}},
  publisher    = {{Books on Demand}},
  title        = {{{Kurzzeitaustenitisierung höchstfester Stähle – eine zeiteffiziente Methode zur Fertigung sicherheitsrelevanter Bauteile mit verbesserten Eigenschaften}}},
  year         = {{2020}},
}

@phdthesis{42010,
  author       = {{Wooldridge, Madison}},
  isbn         = {{978-3-8440-7190-0}},
  publisher    = {{Shaker Verlag}},
  title        = {{{Development of SLM Ni-based Superalloys and Investigation of Corrosion Behavior in Chloride-containing Environments}}},
  year         = {{2020}},
}

@article{41519,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Different studies have been demonstrated that the surface integrity of substrate bulk materials to be coated has a significant impact on the adhesion of thermally sprayed coatings. It is known that the surface integrity of parts processed by selective laser melting (SLM) differs from those obtained from bulk materials. Although 316L stainless steel is among the most investigated material for SLM, the adhesion of thermally sprayed coatings on 316L stainless steel substrates processed by SLM has not been studied yet. This study aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless steel substrates processed by SLM and their effect on the adhesion of high velocity oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical effects and residual stress-related phenomena, a stress-relief heat treatment of the SLM substrates served as a reference throughout the investigations. The differently pre-treated SLM substrates were investigated with regard to the surface roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers interfacial indentation tests were conducted to assess the resulting coating adhesion. The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit good adhesion to the SLM 316L substrates. However, it was found that the stress state in the SLM 316L substrate surface is more likely to affect the adhesion of the WC-Co coating, while the substrate surface roughness showed a marginal effect.</jats:p>}},
  author       = {{Tillmann, Wolfgang and Hagen, Leif and Schaak, Christoph and Liß, J. and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz, Mehmet Esat and Garthe, Kai-Uwe}},
  issn         = {{1059-9630}},
  journal      = {{Journal of Thermal Spray Technology}},
  keywords     = {{Materials Chemistry, Surfaces, Coatings and Films, Condensed Matter Physics}},
  number       = {{6}},
  pages        = {{1396--1409}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}}},
  doi          = {{10.1007/s11666-020-01081-y}},
  volume       = {{29}},
  year         = {{2020}},
}