@article{46480,
author = {{Müller, Hendrik and Weinberger, Christian and Grundmeier, Guido and de los Arcos de Pedro, Maria Teresa}},
issn = {{0368-2048}},
journal = {{Journal of Electron Spectroscopy and Related Phenomena}},
keywords = {{Physical and Theoretical Chemistry, Spectroscopy, Condensed Matter Physics, Atomic and Molecular Physics, and Optics, Radiation, Electronic, Optical and Magnetic Materials}},
publisher = {{Elsevier BV}},
title = {{{UV-enhanced environmental charge compensation in near ambient pressure XPS}}},
doi = {{10.1016/j.elspec.2023.147317}},
volume = {{264}},
year = {{2023}},
}
@article{46542,
abstract = {{Multiprotein adsorption from complex body fluids represents a highly important and complicated phenomenon in medicine. In this work, multiprotein adsorption from diluted human serum at gold and oxidized iron surfaces is investigated at different serum concentrations and pH values. Adsorption-induced changes in surface topography and the total amount of adsorbed proteins are quantified by atomic force microscopy (AFM) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRRAS), respectively. For both surfaces, stronger protein adsorption is observed at pH 6 compared to pH 7 and pH 8. PM-IRRAS furthermore provides some qualitative insights into the pH-dependent alterations in the composition of the adsorbed multiprotein films. Changes in the amide II/amide I band area ratio and in particular side-chain IR absorption suggest that the increased adsorption at pH 6 is accompanied by a change in protein film composition. Presumably, this is mostly driven by the adsorption of human serum albumin, which at pH 6 adsorbs more readily and thereby replaces other proteins with lower surface affinities in the resulting multiprotein film.}},
author = {{Huang, Jingyuan and Qiu, Yunshu and Lücke, Felix and Su, Jiangling and Grundmeier, Guido and Keller, Adrian}},
issn = {{1420-3049}},
journal = {{Molecules}},
keywords = {{Chemistry (miscellaneous), Analytical Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, Molecular Medicine, Drug Discovery, Pharmaceutical Science}},
number = {{16}},
publisher = {{MDPI AG}},
title = {{{Multiprotein Adsorption from Human Serum at Gold and Oxidized Iron Surfaces Studied by Atomic Force Microscopy and Polarization-Modulation Infrared Reflection Absorption Spectroscopy}}},
doi = {{10.3390/molecules28166060}},
volume = {{28}},
year = {{2023}},
}
@article{46543,
abstract = {{The influence of nanoscale surface topography on protein adsorption is highly important for numerous applications in medicine and technology. Herein, ferritin adsorption at flat and nanofaceted, single-crystalline Al2O3 surfaces is investigated using atomic force microscopy and X-ray photoelectron spectroscopy. The nanofaceted surfaces are generated by the thermal annealing of Al2O3 wafers at temperatures above 1000 °C, which leads to the formation of faceted saw-tooth-like surface topographies with periodicities of about 160 nm and amplitudes of about 15 nm. Ferritin adsorption at these nanofaceted surfaces is notably suppressed compared to the flat surface at a concentration of 10 mg/mL, which is attributed to lower adsorption affinities of the newly formed facets. Consequently, adsorption is restricted mostly to the pattern grooves, where the proteins can maximize their contact area with the surface. However, this effect depends on the protein concentration, with an inverse trend being observed at 30 mg/mL. Furthermore, different ferritin adsorption behavior is observed at topographically similar nanofacet patterns fabricated at different annealing temperatures and attributed to different step and kink densities. These results demonstrate that while protein adsorption at solid surfaces can be notably affected by nanofacet patterns, fine-tuning protein adsorption in this way requires the precise control of facet properties.}},
author = {{Pothineni, Bhanu K. and Kollmann, Sabrina and Li, Xinyang and Grundmeier, Guido and Erb, Denise J. and Keller, Adrian}},
issn = {{1422-0067}},
journal = {{International Journal of Molecular Sciences}},
keywords = {{Inorganic Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, Computer Science Applications, Spectroscopy, Molecular Biology, General Medicine, Catalysis}},
number = {{16}},
publisher = {{MDPI AG}},
title = {{{Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces}}},
doi = {{10.3390/ijms241612808}},
volume = {{24}},
year = {{2023}},
}
@article{47140,
abstract = {{The structural stability of DNA origami nanostructures in various chemical environments is an important factor in numerous applications, ranging from biomedicine and biophysics to analytical chemistry and materials synthesis. In...}},
author = {{Hanke, Marcel and Dornbusch, Daniel and Tomm, Emilia and Grundmeier, Guido and Fahmy, Karim and Keller, Adrian}},
issn = {{2040-3364}},
journal = {{Nanoscale}},
keywords = {{General Materials Science}},
publisher = {{Royal Society of Chemistry (RSC)}},
title = {{{Superstructure-dependent stability of DNA origami nanostructures in the presence of chaotropic denaturants}}},
doi = {{10.1039/d3nr02045b}},
year = {{2023}},
}
@inproceedings{62812,
abstract = {{Attributing features of electrochemical impedance spectra to electrochemical phenomena is both crucial and frequently ambiguous. To elucidate the origin of the ohmic part of the spectrum, activated carbon electrodes were prepared with different contents of polyacrylic acid as binder. Their impedance spectra and cyclic voltammograms were recorded using sulfuric acid of five different concentrations as the electrolyte. To distinguish electrolyte resistance and resistances related to the activated carbon layer of the electrode, the specific electrolyte conductivity was independently measured and compared against the ohmic part of the electrochemical impedance spectra (EIS). The capacitive cyclic voltammograms show larger resistive contributions with higher scan rate and lower electrolyte conductivity. Comparing the ohmic part of the EIS to the specific resistance of the electrolyte, a linear function with no statistically significant offset was found. The ohmic part of the EIS, thus, reflects the electrolyte resistance, not that of the carbon electrode.}},
author = {{Reinke, Sebastian and Khamitsevich, Vera and Röth, Oliver and Linnemann, Julia}},
booktitle = {{2023 International Workshop on Impedance Spectroscopy (IWIS)}},
keywords = {{electrochemical impedance spectroscopy, supercapacitors, carbon}},
publisher = {{IEEE}},
title = {{{Assessment of the Physicochemical Meaning of the Ohmic Series Resistance Observed for High Frequencies in Electrochemical Impedance Spectra}}},
doi = {{10.1109/iwis61214.2023.10302764}},
year = {{2023}},
}
@article{58608,
abstract = {{Interfacial reactions at the polycarbonate (PC)/FeCr-alloy interface during melt contact were studied as function of the Fe:Cr ratio within the alloy. Thin Fe/Cr films with lateral composition gradients were deposited by magnetron sputtering; the analysis of the films was done with microscopy and X-ray photoelectron spectroscopy (XPS). The local interfacial polymeric film formation could be therefore directly correlated with the Fe:Cr ratio. The local thickness and structure of the formed polycarbonate residue was analyzed by means of imaging ellipsometry, atomic force microscopy as well as Fourier-transform infrared spectroscopy under grazing incidence and XPS. Moreover, confocal fluorescence microscopy of the PC melt/alloy interface could reveal the formation of minor degradation products in the interphase region. The results show that already an Fe:Cr ratio of 2 : 1 leads to a strong inhibition of the thermal degradation in comparison to the unalloyed iron, and that in general, the enrichment of chromium in the passive film leads to an effective suppression of interfacial PC degradation. The data contributes to improving the mechanistic understanding of the role of iron during this process. Additionally, a critical concentration of chromium in the alloys used for PC processing can be deduced.}},
author = {{Theile-Rasche, Chantal and Meng, T. and de los Arcos de Pedro, Maria Teresa and Grundmeier, Guido}},
issn = {{2523-3971}},
journal = {{SN Applied Sciences}},
number = {{10}},
pages = {{1–12}},
title = {{{Analysis of polycarbonate degradation at melt/FeCr-alloy interfaces as a function of the alloy composition by means of combinatorial thin film chemistry}}},
doi = {{10.1007/s42452-023-05441-5}},
volume = {{5}},
year = {{2023}},
}
@article{58609,
abstract = {{Plasma Processes and Polymers is a plasma journal focusing on the interdisciplinary field of low temperature plasma science.}},
author = {{de los Arcos de Pedro, Maria Teresa and Awakowicz, Peter and Böke, Marc and Boysen, Nils and Brinkmann, Ralf Peter and Dahlmann, Rainer and Devi, Anjana and Eremin, Denis and Franke, Jonas and Gergs, Tobias and Jenderny, Jonathan and Kemaneci, Efe and Kühne, Thomas D. and Kusmierz, Simon and Mussenbrock, Thomas and Rubner, Jens and Trieschmann, Jan and Wessling, Matthias and Xie, Xiaofan and Zanders, David and Zysk, Frederik and Grundmeier, Guido}},
issn = {{1612-8850}},
journal = {{PLASMA PROCESSES AND POLYMERS}},
pages = {{e2300186}},
title = {{{PECVD and PEALD on polymer substrates (part II): Understanding and tuning of barrier and membrane properties of thin films}}},
doi = {{10.1002/ppap.202300186}},
year = {{2023}},
}
@article{58610,
author = {{de los Arcos de Pedro, Maria Teresa and Awakowicz, Peter and Benedikt, Jan and Biskup, Beatrix and Böke, Marc and Boysen, Nils and Buschhaus, Rahel and Dahlmann, Rainer and Devi, Anjana and Gergs, Tobias and Jenderny, Jonathan and von Keudell, Achim and Kühne, Thomas D. and Kusmierz, Simon and Müller, Hendrik and Mussenbrock, Thomas and Trieschmann, Jan and Zanders, David and Zysk, Frederik and Grundmeier, Guido}},
issn = {{1612-8850}},
journal = {{PLASMA PROCESSES AND POLYMERS}},
pages = {{e2300150}},
title = {{{PECVD and PEALD on polymer substrates (part I): Fundamentals and analysis of plasma activation and thin film growth}}},
doi = {{10.1002/ppap.202300150}},
year = {{2023}},
}
@article{58607,
author = {{Xie, Xiaofan and Zanders, David and Preischel, Florian and de los Arcos de Pedro, Maria Teresa and Devi, Anjana and Grundmeier, Guido}},
issn = {{0142-2421}},
journal = {{Surface and Interface Analysis}},
title = {{{Complementary spectroscopic and electrochemical analysis of the sealing of micropores in hexamethyldisilazane plasma polymer films by Al 2 O 3 atomic layer deposition}}},
doi = {{10.1002/sia.7256}},
year = {{2023}},
}
@article{62810,
abstract = {{Cobalt iron containing layered double hydroxides (LDHs) and spinels are promising catalysts for the electrochemical oxygen evolution reaction (OER). Towards development of better performing catalysts, the precise tuning of mesostructural features such as pore size is desirable, but often hard to achieve. Herein, a computer‐controlled microemulsion‐assisted co‐precipitation (MACP) method at constant pH is established and compared to conventional co‐precipitation. With MACP, the particle growth is limited and through variation of the constant pH during synthesis the pore size of the as‐prepared catalysts is controlled, generating materials for the systematic investigation of confinement effects during OER. At a threshold pore size, overpotential increased significantly. Electrochemical impedance spectroscopy (EIS) indicated a change in OER mechanism, involving the oxygen release step. It is assumed that in smaller pores the critical radius for gas bubble formation is not met and therefore a smaller charge‐transfer resistance is observed for medium frequencies.}},
author = {{Rabe, Anna and Jaugstetter, Maximilian and Hiege, Felix and Cosanne, Nicolas and Ortega, Klaus Friedel and Linnemann, Julia and Tschulik, Kristina and Behrens, Malte}},
issn = {{1864-5631}},
journal = {{ChemSusChem}},
keywords = {{electrocatalysis, oxygen evolution reaction, cobalt spinel, cobalt hydroxide, LDH}},
number = {{10}},
publisher = {{Wiley}},
title = {{{Tailoring Pore Size and Catalytic Activity in Cobalt Iron Layered Double Hydroxides and Spinels by Microemulsion‐Assisted pH‐Controlled Co‐Precipitation}}},
doi = {{10.1002/cssc.202202015}},
volume = {{16}},
year = {{2023}},
}
@article{62827,
author = {{Mahnel, Sabrina and Bannert, Franz and Zimmermann, Johannes and Grunder, Sergio and Demmig, Martin and Lomolino, Silvia and Grundmeier, Guido}},
issn = {{0143-7496}},
journal = {{International Journal of Adhesion and Adhesives}},
publisher = {{Elsevier BV}},
title = {{{Open time studies of cold curing polyurethane adhesives using a standardized spatula test setup suitable for near-production conditions}}},
doi = {{10.1016/j.ijadhadh.2023.103560}},
volume = {{129}},
year = {{2023}},
}
@article{62854,
abstract = {{Highly selective rare-earth separation has become increasingly important due to the indispensable role of these elements in various cutting-edge technologies including clean energy. However, the similar physicochemical properties of rare-earth elements (REEs) render their separation very challenging, and the development of new selective receptors for these elements is potentially of very considerable economic and environmental importance. Herein, we report the development of a series of 4-phosphoryl pyrazolone receptors for the selective separation of trivalent lanthanum, europium, and ytterbium as the representatives of light, middle, and heavy REEs, respectively. X-ray crystallography studies were employed to obtain solid-state structures across 11 of the resulting complexes, allowing comparative structure–function relationships to be probed, including the effect of lanthanide contraction that occurs along the series from lanthanum to europium to ytterbium and which potentially provides a basis for REE ion separation. In addition, the influence of ligand structure and lipophilicity on lanthanide binding and selectivity was systematically investigated via n-octanol/water distribution and liquid–liquid extraction (LLE) studies. Corresponding stoichiometry relationships between solid and solution states were well established using slope analyses. The results provide new insights into some fundamental lanthanide coordination chemistry from a separation perspective and establish 4-phosphoryl pyrazolone derivatives as potential practical extraction reagents for the selective separation of REEs in the future.}},
author = {{Zhang, Jianfeng and Wenzel, Marco and Schnaars, Kathleen and Hennersdorf, Felix and Lindoy, Leonard F. and Weigand, Jan J.}},
issn = {{0020-1669}},
journal = {{Inorganic Chemistry}},
number = {{7}},
pages = {{3212--3228}},
publisher = {{American Chemical Society (ACS)}},
title = {{{Highly Tunable 4-Phosphoryl Pyrazolone Receptors for Selective Rare-Earth Separation}}},
doi = {{10.1021/acs.inorgchem.2c04221}},
volume = {{62}},
year = {{2023}},
}
@article{62944,
abstract = {{AbstractMonitoring early stages of polymeric deposit formation and its prevention were studied by in‐situ electrochemical impedance spectroscopy (EIS) in a continuously operating reactor employed for polymer production. An EIS flow cell was designed and employed during the emulsion polymerization of vinyl acetate. The electrochemical analysis of the complex impedance at the solution/reactor interface allows the time‐resolved detection of film formation processes. In comparison to oxide‐covered stainless steel, an anti‐adhesive sol‐gel coated alloy showed a significant inhibition of poly(vinyl acetate) fouling. The EIS‐based approach proved to be a valuable tool for monitoring both thin barrier film performance and fouling processes under harsh process conditions.}},
author = {{Neßlinger, Vanessa and Rust, Sören and Atlanov, Jan and Pauer, Werner and Grundmeier, Guido}},
issn = {{0009-286X}},
journal = {{Chemie Ingenieur Technik}},
number = {{3}},
pages = {{291--299}},
publisher = {{Wiley}},
title = {{{Monitoring Polymeric Fouling in a Continuous Reactor by Electrochemical Impedance Spectroscopy}}},
doi = {{10.1002/cite.202300032}},
volume = {{96}},
year = {{2023}},
}
@article{30209,
abstract = {{DNA origami technology enables the folding of DNA strands into complex nanoscale shapes whose properties and interactions with molecular species often deviate significantly from that of genomic DNA. Here, we investigate the salting-out of different DNA origami shapes by the kosmotropic salt ammonium sulfate that is routinely employed in protein precipitation. We find that centrifugation in the presence of 3 M ammonium sulfate results in notable precipitation of DNA origami nanostructures but not of double-stranded genomic DNA. The precipitated DNA origami nanostructures can be resuspended in ammonium sulfate-free buffer without apparent formation of aggregates or loss of structural integrity. Even though quasi-1D six-helix bundle DNA origami are slightly less susceptible toward salting-out than more compact DNA origami triangles and 24-helix bundles, precipitation and recovery yields appear to be mostly independent of DNA origami shape and superstructure. Exploiting the specificity of ammonium sulfate salting-out for DNA origami nanostructures, we further apply this method to separate DNA origami triangles from genomic DNA fragments in a complex mixture. Our results thus demonstrate the possibility of concentrating and purifying DNA origami nanostructures by ammonium sulfate-induced salting-out.}},
author = {{Hanke, Marcel and Hansen, Niklas and Chen, Ruiping and Grundmeier, Guido and Fahmy, Karim and Keller, Adrian}},
issn = {{1422-0067}},
journal = {{International Journal of Molecular Sciences}},
keywords = {{Inorganic Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, Computer Science Applications, Spectroscopy, Molecular Biology, General Medicine, Catalysis}},
number = {{5}},
pages = {{2817}},
publisher = {{MDPI AG}},
title = {{{Salting-Out of DNA Origami Nanostructures by Ammonium Sulfate}}},
doi = {{10.3390/ijms23052817}},
volume = {{23}},
year = {{2022}},
}
@article{30910,
author = {{Ma, Lin and Pollard, Travis P. and Zhang, Yong and Schroeder, Marshall A. and Ren, Xiaoming and Han, Kee Sung and Ding, Michael S. and Cresce, Arthur V. and Atwater, Terrill B. and Mars, Julian and Cao, Longsheng and Steinrück, Hans-Georg and Mueller, Karl T. and Toney, Michael F. and Hourwitz, Matt and Fourkas, John T. and Maginn, Edward J. and Wang, Chunsheng and Borodin, Oleg and Xu, Kang}},
issn = {{2590-3322}},
journal = {{One Earth}},
keywords = {{Earth and Planetary Sciences (miscellaneous), General Environmental Science}},
number = {{4}},
pages = {{413--421}},
publisher = {{Elsevier BV}},
title = {{{Ammonium enables reversible aqueous Zn battery chemistries by tailoring the interphase}}},
doi = {{10.1016/j.oneear.2022.03.012}},
volume = {{5}},
year = {{2022}},
}
@article{30920,
abstract = {{Abstract
Batteries capable of extreme fast-charging (XFC) are a necessity for the deployment of electric vehicles. Material properties of electrodes and electrolytes along with cell parameters such as stack pressure and temperature have coupled, synergistic, and sometimes deleterious effects on fast-charging performance. We develop a new experimental testbed that allows precise and conformal application of electrode stack pressure. We focus on cell capacity degradation using single-layer pouch cells with graphite anodes, LiNi0.5Mn0.3Co0.2O2 (NMC532) cathodes, and carbonate-based electrolyte. In the tested range (10 – 125 psi), cells cycled at higher pressure show higher capacity and less capacity fading. Additionally, Li plating decreases with increasing pressure as observed with scanning electron microscopy (SEM) and optical imaging. While the loss of Li inventory from Li plating is the largest contributor to capacity fade, electrochemical and SEM examination of the NMC cathodes after XFC experiments show increased secondary particle damage at lower pressure. We infer that the better performance at higher pressure is due to more homogenous reactions of active materials across the electrode and less polarization through the electrode thickness. Our study emphasizes the importance of electrode stack pressure in XFC batteries and highlights its subtle role in cell conditions.}},
author = {{Cao, Chuntian and Steinrück, Hans-Georg and Paul, Partha P and Dunlop, Alison R. and Trask, Stephen E. and Jansen, Andrew and Kasse, Robert M and Thampy, Vivek and Yusuf, Maha and Nelson Weker, Johanna and Shyam, Badri and Subbaraman, Ram and Davis, Kelly and Johnston, Christina M and Takacs, Christopher J and Toney, Michael}},
issn = {{0013-4651}},
journal = {{Journal of The Electrochemical Society}},
keywords = {{Materials Chemistry, Electrochemistry, Surfaces, Coatings and Films, Condensed Matter Physics, Renewable Energy, Sustainability and the Environment, Electronic, Optical and Magnetic Materials}},
pages = {{040540}},
publisher = {{The Electrochemical Society}},
title = {{{Conformal Pressure and Fast-Charging Li-Ion Batteries}}},
doi = {{10.1149/1945-7111/ac653f}},
volume = {{169}},
year = {{2022}},
}
@article{30922,
abstract = {{AbstractPure iron is very attractive as a biodegradable implant material due to its high biocompatibility. In combination with additive manufacturing, which facilitates great flexibility of the implant design, it is possible to selectively adjust the microstructure of the material in the process, thereby control the corrosion and fatigue behavior. In the present study, conventional hot-rolled (HR) pure iron is compared to pure iron manufactured by electron beam melting (EBM). The microstructure, the corrosion behavior and the fatigue properties were studied comprehensively. The investigated sample conditions showed significant differences in the microstructures that led to changes in corrosion and fatigue properties. The EBM iron showed significantly lower fatigue strength compared to the HR iron. These different fatigue responses were observed under purely mechanical loading as well as with superimposed corrosion influence and are summarized in a model that describes the underlying failure mechanisms.}},
author = {{Wackenrohr, Steffen and Torrent, Christof Johannes Jaime and Herbst, Sebastian and Nürnberger, Florian and Krooss, Philipp and Ebbert, Christoph and Voigt, Markus and Grundmeier, Guido and Niendorf, Thomas and Maier, Hans Jürgen}},
issn = {{2397-2106}},
journal = {{npj Materials Degradation}},
keywords = {{Materials Chemistry, Materials Science (miscellaneous), Chemistry (miscellaneous), Ceramics and Composites}},
number = {{1}},
publisher = {{Springer Science and Business Media LLC}},
title = {{{Corrosion fatigue behavior of electron beam melted iron in simulated body fluid}}},
doi = {{10.1038/s41529-022-00226-4}},
volume = {{6}},
year = {{2022}},
}
@article{30923,
abstract = {{Additive manufacturing (AM) processes are not solely used where maximum design freedom meets low lot sizes. Direct microstructure design and topology optimization can be realized concomitantly during processing by adjusting the geometry, the material composition, and the solidification behavior of the material considered. However, when complex specific requirements have to be met, a targeted part design is highly challenging. In the field of biodegradable implant surgery, a cytocompatible material of an application-adapted shape has to be characterized by a specific degradation behavior and reliably predictable mechanical properties. For instance, small amounts of oxides can have a significant effect on microstructural development, thus likewise affecting the strength and corrosion behavior of the processed material. In the present study, biocompatible pure Fe was processed using electron powder bed fusion (E-PBF). Two different modifications of the Fe were processed by incorporating Fe oxide and Ce oxide in different proportions in order to assess their impact on the microstructural evolution, the mechanical response and the corrosion behavior. The quasistatic mechanical and chemical properties were analyzed and correlated with the final microstructural appearance.}},
author = {{Torrent, Christof J. J. and Krooß, Philipp and Huang, Jingyuan and Voigt, Markus and Ebbert, Christoph and Knust, Steffen and Grundmeier, Guido and Niendorf, Thomas}},
issn = {{2674-063X}},
journal = {{Alloys}},
number = {{1}},
pages = {{31--53}},
publisher = {{MDPI AG}},
title = {{{Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties}}},
doi = {{10.3390/alloys1010004}},
volume = {{1}},
year = {{2022}},
}
@article{30738,
author = {{Xin, Yang and Piskunen, Petteri and Suma, Antonio and Li, Changyong and Ijäs, Heini and Ojasalo, Sofia and Seitz, Iris and Kostiainen, Mauri A. and Grundmeier, Guido and Linko, Veikko and Keller, Adrian}},
issn = {{1613-6810}},
journal = {{Small}},
keywords = {{Biomaterials, Biotechnology, General Materials Science, General Chemistry}},
pages = {{2107393}},
publisher = {{Wiley}},
title = {{{Environment‐Dependent Stability and Mechanical Properties of DNA Origami Six‐Helix Bundles with Different Crossover Spacings}}},
doi = {{10.1002/smll.202107393}},
volume = {{18}},
year = {{2022}},
}
@article{29806,
author = {{Huang, Jingyuan and Voigt, Markus and Wackenrohr, Steffen and Ebbert, Christoph and Keller, Adrian and Maier, Hans Jürgen and Grundmeier, Guido}},
issn = {{0947-5117}},
journal = {{Materials and Corrosion}},
keywords = {{Materials Chemistry, Metals and Alloys, Surfaces, Coatings and Films, Mechanical Engineering, Mechanics of Materials, Environmental Chemistry, Materials Chemistry, Metals and Alloys, Surfaces, Coatings and Films, Mechanical Engineering, Mechanics of Materials, Environmental Chemistry, Materials Chemistry, Metals and Alloys, Surfaces, Coatings and Films, Mechanical Engineering, Mechanics of Materials, Environmental Chemistry}},
pages = {{1034}},
publisher = {{Wiley}},
title = {{{Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid}}},
doi = {{10.1002/maco.202112841}},
volume = {{73}},
year = {{2022}},
}