[{"doi":"10.1002/advs.202201749","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2022-10-20T12:25:35Z","intvolume":"         9","year":"2022","title":"Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice","author":[{"full_name":"Kim, Sanghoon","last_name":"Kim","first_name":"Sanghoon"},{"last_name":"Pathak","first_name":"Sachin","full_name":"Pathak, Sachin"},{"first_name":"Sonny H.","last_name":"Rhim","full_name":"Rhim, Sonny H."},{"full_name":"Cha, Jongin","first_name":"Jongin","last_name":"Cha"},{"last_name":"Jekal","first_name":"Soyoung","full_name":"Jekal, Soyoung"},{"last_name":"Hong","first_name":"Soon Cheol","full_name":"Hong, Soon Cheol"},{"full_name":"Lee, Hyun Hwi","first_name":"Hyun Hwi","last_name":"Lee"},{"first_name":"Sung‐Hun","last_name":"Park","full_name":"Park, Sung‐Hun"},{"full_name":"Lee, Han‐Koo","first_name":"Han‐Koo","last_name":"Lee"},{"full_name":"Park, Jae‐Hoon","last_name":"Park","first_name":"Jae‐Hoon"},{"full_name":"Lee, Soogil","first_name":"Soogil","last_name":"Lee"},{"full_name":"Steinrück, Hans-Georg","last_name":"Steinrück","first_name":"Hans-Georg","orcid":"0000-0001-6373-0877","id":"84268"},{"full_name":"Mehta, Apurva","last_name":"Mehta","first_name":"Apurva"},{"full_name":"Wang, Shan X.","last_name":"Wang","first_name":"Shan X."},{"full_name":"Hong, Jongill","last_name":"Hong","first_name":"Jongill"}],"publication_identifier":{"issn":["2198-3844","2198-3844"]},"keyword":["General Physics and Astronomy","General Engineering","Biochemistry","Genetics and Molecular Biology (miscellaneous)","General Materials Science","General Chemical Engineering","Medicine (miscellaneous)"],"type":"journal_article","department":[{"_id":"633"}],"date_created":"2022-10-20T12:23:54Z","publication":"Advanced Science","issue":"24","user_id":"84268","volume":9,"page":"2201749","_id":"33833","publisher":"Wiley","status":"public","citation":{"mla":"Kim, Sanghoon, et al. “Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice.” <i>Advanced Science</i>, vol. 9, no. 24, Wiley, 2022, p. 2201749, doi:<a href=\"https://doi.org/10.1002/advs.202201749\">10.1002/advs.202201749</a>.","bibtex":"@article{Kim_Pathak_Rhim_Cha_Jekal_Hong_Lee_Park_Lee_Park_et al._2022, title={Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice}, volume={9}, DOI={<a href=\"https://doi.org/10.1002/advs.202201749\">10.1002/advs.202201749</a>}, number={24}, journal={Advanced Science}, publisher={Wiley}, author={Kim, Sanghoon and Pathak, Sachin and Rhim, Sonny H. and Cha, Jongin and Jekal, Soyoung and Hong, Soon Cheol and Lee, Hyun Hwi and Park, Sung‐Hun and Lee, Han‐Koo and Park, Jae‐Hoon and et al.}, year={2022}, pages={2201749} }","ama":"Kim S, Pathak S, Rhim SH, et al. Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice. <i>Advanced Science</i>. 2022;9(24):2201749. doi:<a href=\"https://doi.org/10.1002/advs.202201749\">10.1002/advs.202201749</a>","ieee":"S. Kim <i>et al.</i>, “Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice,” <i>Advanced Science</i>, vol. 9, no. 24, p. 2201749, 2022, doi: <a href=\"https://doi.org/10.1002/advs.202201749\">10.1002/advs.202201749</a>.","apa":"Kim, S., Pathak, S., Rhim, S. H., Cha, J., Jekal, S., Hong, S. C., Lee, H. H., Park, S., Lee, H., Park, J., Lee, S., Steinrück, H.-G., Mehta, A., Wang, S. X., &#38; Hong, J. (2022). Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice. <i>Advanced Science</i>, <i>9</i>(24), 2201749. <a href=\"https://doi.org/10.1002/advs.202201749\">https://doi.org/10.1002/advs.202201749</a>","short":"S. Kim, S. Pathak, S.H. Rhim, J. Cha, S. Jekal, S.C. Hong, H.H. Lee, S. Park, H. Lee, J. Park, S. Lee, H.-G. Steinrück, A. Mehta, S.X. Wang, J. Hong, Advanced Science 9 (2022) 2201749.","chicago":"Kim, Sanghoon, Sachin Pathak, Sonny H. Rhim, Jongin Cha, Soyoung Jekal, Soon Cheol Hong, Hyun Hwi Lee, et al. “Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice.” <i>Advanced Science</i> 9, no. 24 (2022): 2201749. <a href=\"https://doi.org/10.1002/advs.202201749\">https://doi.org/10.1002/advs.202201749</a>."}},{"date_created":"2023-03-14T13:02:55Z","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"type":"journal_article","department":[{"_id":"321"},{"_id":"302"}],"publication":"Journal of Advanced Joining Processes","article_number":"100137","language":[{"iso":"eng"}],"doi":"10.1016/j.jajp.2022.100137","year":"2022","title":"Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation","publication_identifier":{"issn":["2666-3309"]},"author":[{"last_name":"Duderija","first_name":"B.","full_name":"Duderija, B."},{"full_name":"González-Orive, A.","last_name":"González-Orive","first_name":"A."},{"full_name":"Schmidt, H.C.","first_name":"H.C.","last_name":"Schmidt"},{"full_name":"Calderón, J.C.","first_name":"J.C.","last_name":"Calderón"},{"full_name":"Hordych, I.","first_name":"I.","last_name":"Hordych"},{"last_name":"Maier","first_name":"H.J.","full_name":"Maier, H.J."},{"full_name":"Homberg, W.","last_name":"Homberg","first_name":"W."},{"first_name":"G.","last_name":"Grundmeier","full_name":"Grundmeier, G."}],"date_updated":"2024-02-06T12:33:20Z","publication_status":"published","intvolume":"         7","citation":{"bibtex":"@article{Duderija_González-Orive_Schmidt_Calderón_Hordych_Maier_Homberg_Grundmeier_2022, title={Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation}, volume={7}, DOI={<a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>}, number={100137}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Duderija, B. and González-Orive, A. and Schmidt, H.C. and Calderón, J.C. and Hordych, I. and Maier, H.J. and Homberg, W. and Grundmeier, G.}, year={2022} }","ama":"Duderija B, González-Orive A, Schmidt HC, et al. Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. <i>Journal of Advanced Joining Processes</i>. 2022;7. doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>","short":"B. Duderija, A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, G. Grundmeier, Journal of Advanced Joining Processes 7 (2022).","chicago":"Duderija, B., A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, and G. Grundmeier. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” <i>Journal of Advanced Joining Processes</i> 7 (2022). <a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">https://doi.org/10.1016/j.jajp.2022.100137</a>.","ieee":"B. Duderija <i>et al.</i>, “Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation,” <i>Journal of Advanced Joining Processes</i>, vol. 7, Art. no. 100137, 2022, doi: <a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>.","apa":"Duderija, B., González-Orive, A., Schmidt, H. C., Calderón, J. C., Hordych, I., Maier, H. J., Homberg, W., &#38; Grundmeier, G. (2022). Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. <i>Journal of Advanced Joining Processes</i>, <i>7</i>, Article 100137. <a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">https://doi.org/10.1016/j.jajp.2022.100137</a>","mla":"Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” <i>Journal of Advanced Joining Processes</i>, vol. 7, 100137, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jajp.2022.100137\">10.1016/j.jajp.2022.100137</a>."},"publisher":"Elsevier BV","_id":"43021","user_id":"54863","volume":7,"status":"public"},{"type":"journal_article","department":[{"_id":"157"},{"_id":"302"}],"date_created":"2022-06-29T11:41:25Z","publication":"adhäsion KLEBEN & DICHTEN ","citation":{"chicago":"Schmolke, Tobias, Gerson Meschut, Florian Rieker, Dennis Meinderink, and Guido Grundmeier. “Untersuchung von Klebverbindungen für Batteriegehäuse.” <i>adhäsion KLEBEN &#38; DICHTEN </i> 66 (2022): 40–43. <a href=\"https://doi.org/10.1007/s35145-022-0596-9\">https://doi.org/10.1007/s35145-022-0596-9</a>.","short":"T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, G. Grundmeier, adhäsion KLEBEN &#38; DICHTEN  66 (2022) 40–43.","ieee":"T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, and G. Grundmeier, “Untersuchung von Klebverbindungen für Batteriegehäuse,” <i>adhäsion KLEBEN &#38; DICHTEN </i>, vol. 66, pp. 40–43, 2022, doi: <a href=\"https://doi.org/10.1007/s35145-022-0596-9\">https://doi.org/10.1007/s35145-022-0596-9</a>.","apa":"Schmolke, T., Meschut, G., Rieker, F., Meinderink, D., &#38; Grundmeier, G. (2022). Untersuchung von Klebverbindungen für Batteriegehäuse. <i>adhäsion KLEBEN &#38; DICHTEN </i>, <i>66</i>, 40–43. <a href=\"https://doi.org/10.1007/s35145-022-0596-9\">https://doi.org/10.1007/s35145-022-0596-9</a>","bibtex":"@article{Schmolke_Meschut_Rieker_Meinderink_Grundmeier_2022, title={Untersuchung von Klebverbindungen für Batteriegehäuse}, volume={66}, DOI={<a href=\"https://doi.org/10.1007/s35145-022-0596-9\">https://doi.org/10.1007/s35145-022-0596-9</a>}, journal={adhäsion KLEBEN &#38; DICHTEN }, publisher={Springer Nature}, author={Schmolke, Tobias and Meschut, Gerson and Rieker, Florian and Meinderink, Dennis and Grundmeier, Guido}, year={2022}, pages={40–43} }","ama":"Schmolke T, Meschut G, Rieker F, Meinderink D, Grundmeier G. Untersuchung von Klebverbindungen für Batteriegehäuse. <i>adhäsion KLEBEN &#38; DICHTEN </i>. 2022;66:40-43. doi:<a href=\"https://doi.org/10.1007/s35145-022-0596-9\">https://doi.org/10.1007/s35145-022-0596-9</a>","mla":"Schmolke, Tobias, et al. “Untersuchung von Klebverbindungen für Batteriegehäuse.” <i>adhäsion KLEBEN &#38; DICHTEN </i>, vol. 66, Springer Nature, 2022, pp. 40–43, doi:<a href=\"https://doi.org/10.1007/s35145-022-0596-9\">https://doi.org/10.1007/s35145-022-0596-9</a>."},"user_id":"41235","doi":"https://doi.org/10.1007/s35145-022-0596-9","volume":66,"page":"40-43","language":[{"iso":"ger"}],"_id":"32283","publisher":"Springer Nature","publication_status":"published","date_updated":"2024-03-19T06:08:14Z","intvolume":"        66","title":"Untersuchung von Klebverbindungen für Batteriegehäuse","year":"2022","status":"public","author":[{"id":"44759","full_name":"Schmolke, Tobias","last_name":"Schmolke","first_name":"Tobias"},{"full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056"},{"full_name":"Rieker, Florian","first_name":"Florian","last_name":"Rieker"},{"full_name":"Meinderink, Dennis","last_name":"Meinderink","first_name":"Dennis","orcid":"0000-0002-2755-6514","id":"32378"},{"last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido","id":"194"}]},{"_id":"36874","publisher":"Elsevier BV","user_id":"48864","volume":609,"status":"public","citation":{"mla":"Su, Jiangling, et al. “Nano-FTIR and Chemical Force Analysis of Electrografted Aryldiazonium Salts on ODT-Microcontact Printed Au-Surfaces.” <i>Applied Surface Science</i>, vol. 609, 155355, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.apsusc.2022.155355\">10.1016/j.apsusc.2022.155355</a>.","bibtex":"@article{Su_González Orive_Grundmeier_2022, title={Nano-FTIR and chemical force analysis of electrografted aryldiazonium salts on ODT-microcontact printed Au-surfaces}, volume={609}, DOI={<a href=\"https://doi.org/10.1016/j.apsusc.2022.155355\">10.1016/j.apsusc.2022.155355</a>}, number={155355}, journal={Applied Surface Science}, publisher={Elsevier BV}, author={Su, Jiangling and González Orive, Alejandro and Grundmeier, Guido}, year={2022} }","ama":"Su J, González Orive A, Grundmeier G. Nano-FTIR and chemical force analysis of electrografted aryldiazonium salts on ODT-microcontact printed Au-surfaces. <i>Applied Surface Science</i>. 2022;609. doi:<a href=\"https://doi.org/10.1016/j.apsusc.2022.155355\">10.1016/j.apsusc.2022.155355</a>","ieee":"J. Su, A. González Orive, and G. Grundmeier, “Nano-FTIR and chemical force analysis of electrografted aryldiazonium salts on ODT-microcontact printed Au-surfaces,” <i>Applied Surface Science</i>, vol. 609, Art. no. 155355, 2022, doi: <a href=\"https://doi.org/10.1016/j.apsusc.2022.155355\">10.1016/j.apsusc.2022.155355</a>.","apa":"Su, J., González Orive, A., &#38; Grundmeier, G. (2022). Nano-FTIR and chemical force analysis of electrografted aryldiazonium salts on ODT-microcontact printed Au-surfaces. <i>Applied Surface Science</i>, <i>609</i>, Article 155355. <a href=\"https://doi.org/10.1016/j.apsusc.2022.155355\">https://doi.org/10.1016/j.apsusc.2022.155355</a>","short":"J. Su, A. González Orive, G. Grundmeier, Applied Surface Science 609 (2022).","chicago":"Su, Jiangling, Alejandro González Orive, and Guido Grundmeier. “Nano-FTIR and Chemical Force Analysis of Electrografted Aryldiazonium Salts on ODT-Microcontact Printed Au-Surfaces.” <i>Applied Surface Science</i> 609 (2022). <a href=\"https://doi.org/10.1016/j.apsusc.2022.155355\">https://doi.org/10.1016/j.apsusc.2022.155355</a>."},"article_number":"155355","language":[{"iso":"eng"}],"doi":"10.1016/j.apsusc.2022.155355","title":"Nano-FTIR and chemical force analysis of electrografted aryldiazonium salts on ODT-microcontact printed Au-surfaces","year":"2022","author":[{"full_name":"Su, Jiangling","first_name":"Jiangling","last_name":"Su"},{"first_name":"Alejandro","last_name":"González Orive","full_name":"González Orive, Alejandro"},{"last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido","id":"194"}],"publication_identifier":{"issn":["0169-4332"]},"date_updated":"2023-01-16T08:57:20Z","publication_status":"published","intvolume":"       609","date_created":"2023-01-16T08:57:02Z","keyword":["Surfaces","Coatings and Films","Condensed Matter Physics","Surfaces and Interfaces","General Physics and Astronomy","General Chemistry"],"type":"journal_article","department":[{"_id":"302"}],"publication":"Applied Surface Science"},{"publication":"Surface and Coatings Technology","date_created":"2023-01-16T08:55:49Z","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Condensed Matter Physics","General Chemistry"],"type":"journal_article","department":[{"_id":"302"}],"year":"2022","title":"Oxidation stability of chromium aluminum oxynitride hard coatings","author":[{"full_name":"Bobzin, K.","first_name":"K.","last_name":"Bobzin"},{"first_name":"C.","last_name":"Kalscheuer","full_name":"Kalscheuer, C."},{"id":"194","full_name":"Grundmeier, Guido","first_name":"Guido","last_name":"Grundmeier"},{"first_name":"T.","last_name":"de los Arcos","full_name":"de los Arcos, T."},{"full_name":"Kollmann, S.","first_name":"S.","last_name":"Kollmann"},{"full_name":"Carlet, M.","last_name":"Carlet","first_name":"M."}],"publication_identifier":{"issn":["0257-8972"]},"date_updated":"2023-01-16T08:56:13Z","publication_status":"published","intvolume":"       449","article_number":"128927","language":[{"iso":"eng"}],"doi":"10.1016/j.surfcoat.2022.128927","citation":{"mla":"Bobzin, K., et al. “Oxidation Stability of Chromium Aluminum Oxynitride Hard Coatings.” <i>Surface and Coatings Technology</i>, vol. 449, 128927, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>.","ama":"Bobzin K, Kalscheuer C, Grundmeier G, de los Arcos T, Kollmann S, Carlet M. Oxidation stability of chromium aluminum oxynitride hard coatings. <i>Surface and Coatings Technology</i>. 2022;449. doi:<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>","bibtex":"@article{Bobzin_Kalscheuer_Grundmeier_de los Arcos_Kollmann_Carlet_2022, title={Oxidation stability of chromium aluminum oxynitride hard coatings}, volume={449}, DOI={<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>}, number={128927}, journal={Surface and Coatings Technology}, publisher={Elsevier BV}, author={Bobzin, K. and Kalscheuer, C. and Grundmeier, Guido and de los Arcos, T. and Kollmann, S. and Carlet, M.}, year={2022} }","apa":"Bobzin, K., Kalscheuer, C., Grundmeier, G., de los Arcos, T., Kollmann, S., &#38; Carlet, M. (2022). Oxidation stability of chromium aluminum oxynitride hard coatings. <i>Surface and Coatings Technology</i>, <i>449</i>, Article 128927. <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">https://doi.org/10.1016/j.surfcoat.2022.128927</a>","ieee":"K. Bobzin, C. Kalscheuer, G. Grundmeier, T. de los Arcos, S. Kollmann, and M. Carlet, “Oxidation stability of chromium aluminum oxynitride hard coatings,” <i>Surface and Coatings Technology</i>, vol. 449, Art. no. 128927, 2022, doi: <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>.","short":"K. Bobzin, C. Kalscheuer, G. Grundmeier, T. de los Arcos, S. Kollmann, M. Carlet, Surface and Coatings Technology 449 (2022).","chicago":"Bobzin, K., C. Kalscheuer, Guido Grundmeier, T. de los Arcos, S. Kollmann, and M. Carlet. “Oxidation Stability of Chromium Aluminum Oxynitride Hard Coatings.” <i>Surface and Coatings Technology</i> 449 (2022). <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">https://doi.org/10.1016/j.surfcoat.2022.128927</a>."},"status":"public","_id":"36872","publisher":"Elsevier BV","user_id":"48864","volume":449},{"title":"Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components","status":"public","year":"2022","publication_identifier":{"issn":["1862-832X","1862-8338"]},"author":[{"full_name":"Neßlinger, Vanessa","first_name":"Vanessa","last_name":"Neßlinger"},{"full_name":"Welzel, Stefan","last_name":"Welzel","first_name":"Stefan"},{"last_name":"Rieker","first_name":"Florian","full_name":"Rieker, Florian"},{"full_name":"Meinderink, Dennis","first_name":"Dennis","last_name":"Meinderink","orcid":"0000-0002-2755-6514","id":"32378"},{"last_name":"Nieken","first_name":"Ulrich","full_name":"Nieken, Ulrich"},{"full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido","id":"194"}],"publication_status":"published","date_updated":"2023-01-16T08:56:52Z","article_number":"2200043","language":[{"iso":"eng"}],"_id":"36873","publisher":"Wiley","user_id":"48864","doi":"10.1002/mren.202200043","publication":"Macromolecular Reaction Engineering","citation":{"ama":"Neßlinger V, Welzel S, Rieker F, Meinderink D, Nieken U, Grundmeier G. Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components. <i>Macromolecular Reaction Engineering</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1002/mren.202200043\">10.1002/mren.202200043</a>","bibtex":"@article{Neßlinger_Welzel_Rieker_Meinderink_Nieken_Grundmeier_2022, title={Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components}, DOI={<a href=\"https://doi.org/10.1002/mren.202200043\">10.1002/mren.202200043</a>}, number={2200043}, journal={Macromolecular Reaction Engineering}, publisher={Wiley}, author={Neßlinger, Vanessa and Welzel, Stefan and Rieker, Florian and Meinderink, Dennis and Nieken, Ulrich and Grundmeier, Guido}, year={2022} }","mla":"Neßlinger, Vanessa, et al. “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components.” <i>Macromolecular Reaction Engineering</i>, 2200043, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/mren.202200043\">10.1002/mren.202200043</a>.","chicago":"Neßlinger, Vanessa, Stefan Welzel, Florian Rieker, Dennis Meinderink, Ulrich Nieken, and Guido Grundmeier. “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components.” <i>Macromolecular Reaction Engineering</i>, 2022. <a href=\"https://doi.org/10.1002/mren.202200043\">https://doi.org/10.1002/mren.202200043</a>.","short":"V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, G. Grundmeier, Macromolecular Reaction Engineering (2022).","apa":"Neßlinger, V., Welzel, S., Rieker, F., Meinderink, D., Nieken, U., &#38; Grundmeier, G. (2022). Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components. <i>Macromolecular Reaction Engineering</i>, Article 2200043. <a href=\"https://doi.org/10.1002/mren.202200043\">https://doi.org/10.1002/mren.202200043</a>","ieee":"V. Neßlinger, S. Welzel, F. Rieker, D. Meinderink, U. Nieken, and G. Grundmeier, “Thin Organic‐Inorganic Anti‐Fouling Hybrid‐Films for Microreactor Components,” <i>Macromolecular Reaction Engineering</i>, Art. no. 2200043, 2022, doi: <a href=\"https://doi.org/10.1002/mren.202200043\">10.1002/mren.202200043</a>."},"date_created":"2023-01-16T08:56:30Z","keyword":["Polymers and Plastics","General Chemical Engineering","General Chemistry"],"type":"journal_article","department":[{"_id":"302"}]},{"issue":"4","publication":"Plasma Processes and Polymers","type":"journal_article","keyword":["Polymers and Plastics","Condensed Matter Physics"],"department":[{"_id":"302"}],"date_created":"2023-01-11T10:10:09Z","publication_status":"published","date_updated":"2023-01-24T08:07:46Z","intvolume":"        19","title":"Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO            <sub>              <i>x</i>            </sub>            thin films on PDMS","year":"2022","publication_identifier":{"issn":["1612-8850","1612-8869"]},"author":[{"last_name":"Hoppe","first_name":"Christian","full_name":"Hoppe, Christian"},{"first_name":"Felix","last_name":"Mitschker","full_name":"Mitschker, Felix"},{"full_name":"Mai, Lukas","first_name":"Lukas","last_name":"Mai"},{"full_name":"Liedke, Maciej Oskar","first_name":"Maciej Oskar","last_name":"Liedke"},{"id":"54556","last_name":"de los Arcos de Pedro","first_name":"Maria Teresa","full_name":"de los Arcos de Pedro, Maria Teresa"},{"full_name":"Awakowicz, Peter","last_name":"Awakowicz","first_name":"Peter"},{"last_name":"Devi","first_name":"Anjana","full_name":"Devi, Anjana"},{"last_name":"Attallah","first_name":"Ahmed Gamal","full_name":"Attallah, Ahmed Gamal"},{"last_name":"Butterling","first_name":"Maik","full_name":"Butterling, Maik"},{"first_name":"Andreas","last_name":"Wagner","full_name":"Wagner, Andreas"},{"last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido"}],"doi":"10.1002/ppap.202100174","article_number":"2100174","language":[{"iso":"eng"}],"citation":{"apa":"Hoppe, C., Mitschker, F., Mai, L., Liedke, M. O., de los Arcos de Pedro, M. T., Awakowicz, P., Devi, A., Attallah, A. G., Butterling, M., Wagner, A., &#38; Grundmeier, G. (2022). Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO            <sub>              <i>x</i>            </sub>            thin films on PDMS. <i>Plasma Processes and Polymers</i>, <i>19</i>(4), Article 2100174. <a href=\"https://doi.org/10.1002/ppap.202100174\">https://doi.org/10.1002/ppap.202100174</a>","ieee":"C. Hoppe <i>et al.</i>, “Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO            <sub>              <i>x</i>            </sub>            thin films on PDMS,” <i>Plasma Processes and Polymers</i>, vol. 19, no. 4, Art. no. 2100174, 2022, doi: <a href=\"https://doi.org/10.1002/ppap.202100174\">10.1002/ppap.202100174</a>.","chicago":"Hoppe, Christian, Felix Mitschker, Lukas Mai, Maciej Oskar Liedke, Maria Teresa de los Arcos de Pedro, Peter Awakowicz, Anjana Devi, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO            <sub>              <i>x</i>            </sub>            Thin Films on PDMS.” <i>Plasma Processes and Polymers</i> 19, no. 4 (2022). <a href=\"https://doi.org/10.1002/ppap.202100174\">https://doi.org/10.1002/ppap.202100174</a>.","short":"C. Hoppe, F. Mitschker, L. Mai, M.O. Liedke, M.T. de los Arcos de Pedro, P. Awakowicz, A. Devi, A.G. Attallah, M. Butterling, A. Wagner, G. Grundmeier, Plasma Processes and Polymers 19 (2022).","mla":"Hoppe, Christian, et al. “Influence of Surface Activation on the Microporosity of PE‐CVD and PE‐ALD SiO            <sub>              <i>x</i>            </sub>            Thin Films on PDMS.” <i>Plasma Processes and Polymers</i>, vol. 19, no. 4, 2100174, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/ppap.202100174\">10.1002/ppap.202100174</a>.","ama":"Hoppe C, Mitschker F, Mai L, et al. Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO            <sub>              <i>x</i>            </sub>            thin films on PDMS. <i>Plasma Processes and Polymers</i>. 2022;19(4). doi:<a href=\"https://doi.org/10.1002/ppap.202100174\">10.1002/ppap.202100174</a>","bibtex":"@article{Hoppe_Mitschker_Mai_Liedke_de los Arcos de Pedro_Awakowicz_Devi_Attallah_Butterling_Wagner_et al._2022, title={Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiO            <sub>              <i>x</i>            </sub>            thin films on PDMS}, volume={19}, DOI={<a href=\"https://doi.org/10.1002/ppap.202100174\">10.1002/ppap.202100174</a>}, number={42100174}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Hoppe, Christian and Mitschker, Felix and Mai, Lukas and Liedke, Maciej Oskar and de los Arcos de Pedro, Maria Teresa and Awakowicz, Peter and Devi, Anjana and Attallah, Ahmed Gamal and Butterling, Maik and Wagner, Andreas and et al.}, year={2022} }"},"status":"public","user_id":"54556","volume":19,"_id":"35977","publisher":"Wiley"},{"citation":{"chicago":"Arcos de Pedro, Maria Teresa de los, Christian Weinberger, Frederik Zysk, Varun Raj Damerla, Sabrina Kollmann, Pascal Vieth, Michael Tiemann, Thomas D. Kühne, and Guido Grundmeier. “Challenges in the Interpretation of Gas Core Levels for the Determination of Gas-Solid Interactions within Dielectric Porous Films by Ambient Pressure XPS.” <i>Applied Surface Science</i> 604 (2022). <a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">https://doi.org/10.1016/j.apsusc.2022.154525</a>.","short":"M.T. de los Arcos de Pedro, C. Weinberger, F. Zysk, V. Raj Damerla, S. Kollmann, P. Vieth, M. Tiemann, T.D. Kühne, G. Grundmeier, Applied Surface Science 604 (2022).","apa":"de los Arcos de Pedro, M. T., Weinberger, C., Zysk, F., Raj Damerla, V., Kollmann, S., Vieth, P., Tiemann, M., Kühne, T. D., &#38; Grundmeier, G. (2022). Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS. <i>Applied Surface Science</i>, <i>604</i>, Article 154525. <a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">https://doi.org/10.1016/j.apsusc.2022.154525</a>","ieee":"M. T. de los Arcos de Pedro <i>et al.</i>, “Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS,” <i>Applied Surface Science</i>, vol. 604, Art. no. 154525, 2022, doi: <a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>.","ama":"de los Arcos de Pedro MT, Weinberger C, Zysk F, et al. Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS. <i>Applied Surface Science</i>. 2022;604. doi:<a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>","bibtex":"@article{de los Arcos de Pedro_Weinberger_Zysk_Raj Damerla_Kollmann_Vieth_Tiemann_Kühne_Grundmeier_2022, title={Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS}, volume={604}, DOI={<a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>}, number={154525}, journal={Applied Surface Science}, publisher={Elsevier BV}, author={de los Arcos de Pedro, Maria Teresa and Weinberger, Christian and Zysk, Frederik and Raj Damerla, Varun and Kollmann, Sabrina and Vieth, Pascal and Tiemann, Michael and Kühne, Thomas D. and Grundmeier, Guido}, year={2022} }","mla":"de los Arcos de Pedro, Maria Teresa, et al. “Challenges in the Interpretation of Gas Core Levels for the Determination of Gas-Solid Interactions within Dielectric Porous Films by Ambient Pressure XPS.” <i>Applied Surface Science</i>, vol. 604, 154525, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>."},"user_id":"54556","volume":604,"_id":"35976","publisher":"Elsevier BV","status":"public","keyword":["Surfaces","Coatings and Films","Condensed Matter Physics","Surfaces and Interfaces","General Physics and Astronomy","General Chemistry"],"type":"journal_article","department":[{"_id":"302"}],"date_created":"2023-01-11T10:09:49Z","publication":"Applied Surface Science","doi":"10.1016/j.apsusc.2022.154525","article_number":"154525","language":[{"iso":"eng"}],"date_updated":"2023-01-24T08:10:06Z","publication_status":"published","intvolume":"       604","title":"Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS","year":"2022","author":[{"id":"54556","full_name":"de los Arcos de Pedro, Maria Teresa","first_name":"Maria Teresa","last_name":"de los Arcos de Pedro"},{"full_name":"Weinberger, Christian","last_name":"Weinberger","first_name":"Christian"},{"full_name":"Zysk, Frederik","first_name":"Frederik","last_name":"Zysk"},{"full_name":"Raj Damerla, Varun","last_name":"Raj Damerla","first_name":"Varun"},{"full_name":"Kollmann, Sabrina","first_name":"Sabrina","last_name":"Kollmann"},{"last_name":"Vieth","first_name":"Pascal","full_name":"Vieth, Pascal"},{"last_name":"Tiemann","first_name":"Michael","full_name":"Tiemann, Michael"},{"first_name":"Thomas D.","last_name":"Kühne","full_name":"Kühne, Thomas D."},{"last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido"}],"publication_identifier":{"issn":["0169-4332"]}},{"date_created":"2023-01-11T10:08:25Z","keyword":["Polymers and Plastics","Condensed Matter Physics"],"type":"journal_article","department":[{"_id":"302"}],"issue":"11","publication":"Plasma Processes and Polymers","article_number":"2200052","language":[{"iso":"eng"}],"doi":"10.1002/ppap.202200052","year":"2022","title":"Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation","publication_identifier":{"issn":["1612-8850","1612-8869"]},"author":[{"full_name":"Xie, Xiaofan","last_name":"Xie","first_name":"Xiaofan"},{"full_name":"de los Arcos de Pedro, Maria Teresa","last_name":"de los Arcos de Pedro","first_name":"Maria Teresa","id":"54556"},{"full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido","id":"194"}],"publication_status":"published","date_updated":"2023-01-24T08:48:44Z","intvolume":"        19","citation":{"mla":"Xie, Xiaofan, et al. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” <i>Plasma Processes and Polymers</i>, vol. 19, no. 11, 2200052, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/ppap.202200052\">10.1002/ppap.202200052</a>.","ama":"Xie X, de los Arcos de Pedro MT, Grundmeier G. Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. <i>Plasma Processes and Polymers</i>. 2022;19(11). doi:<a href=\"https://doi.org/10.1002/ppap.202200052\">10.1002/ppap.202200052</a>","bibtex":"@article{Xie_de los Arcos de Pedro_Grundmeier_2022, title={Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation}, volume={19}, DOI={<a href=\"https://doi.org/10.1002/ppap.202200052\">10.1002/ppap.202200052</a>}, number={112200052}, journal={Plasma Processes and Polymers}, publisher={Wiley}, author={Xie, Xiaofan and de los Arcos de Pedro, Maria Teresa and Grundmeier, Guido}, year={2022} }","apa":"Xie, X., de los Arcos de Pedro, M. T., &#38; Grundmeier, G. (2022). Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation. <i>Plasma Processes and Polymers</i>, <i>19</i>(11), Article 2200052. <a href=\"https://doi.org/10.1002/ppap.202200052\">https://doi.org/10.1002/ppap.202200052</a>","ieee":"X. Xie, M. T. de los Arcos de Pedro, and G. Grundmeier, “Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation,” <i>Plasma Processes and Polymers</i>, vol. 19, no. 11, Art. no. 2200052, 2022, doi: <a href=\"https://doi.org/10.1002/ppap.202200052\">10.1002/ppap.202200052</a>.","chicago":"Xie, Xiaofan, Maria Teresa de los Arcos de Pedro, and Guido Grundmeier. “Comparative Analysis of Hexamethyldisiloxane and Hexamethyldisilazane Plasma Polymer Thin Films before and after Plasma Oxidation.” <i>Plasma Processes and Polymers</i> 19, no. 11 (2022). <a href=\"https://doi.org/10.1002/ppap.202200052\">https://doi.org/10.1002/ppap.202200052</a>.","short":"X. Xie, M.T. de los Arcos de Pedro, G. Grundmeier, Plasma Processes and Polymers 19 (2022)."},"_id":"35974","publisher":"Wiley","user_id":"54556","volume":19,"status":"public"},{"doi":"10.1016/j.porgcoat.2022.106977","language":[{"iso":"eng"}],"article_number":"106977","intvolume":"       170","publication_status":"published","date_updated":"2023-02-06T09:58:55Z","author":[{"first_name":"Deniz","last_name":"Dogan","full_name":"Dogan, Deniz"},{"last_name":"Ruthmann","first_name":"Simon","full_name":"Ruthmann, Simon"},{"first_name":"Oliver","last_name":"Seewald","full_name":"Seewald, Oliver"},{"full_name":"Bremser, Wolfgang","first_name":"Wolfgang","last_name":"Bremser"}],"publication_identifier":{"issn":["0300-9440"]},"year":"2022","title":"Tuning of antifouling active PDMS domains tethered to epoxy/amine surface","department":[{"_id":"35"},{"_id":"301"},{"_id":"321"}],"type":"journal_article","keyword":["Materials Chemistry","Organic Chemistry","Surfaces","Coatings and Films","General Chemical Engineering"],"date_created":"2023-01-12T12:45:39Z","publication":"Progress in Organic Coatings","volume":170,"user_id":"32","publisher":"Elsevier BV","_id":"36425","status":"public","citation":{"bibtex":"@article{Dogan_Ruthmann_Seewald_Bremser_2022, title={Tuning of antifouling active PDMS domains tethered to epoxy/amine surface}, volume={170}, DOI={<a href=\"https://doi.org/10.1016/j.porgcoat.2022.106977\">10.1016/j.porgcoat.2022.106977</a>}, number={106977}, journal={Progress in Organic Coatings}, publisher={Elsevier BV}, author={Dogan, Deniz and Ruthmann, Simon and Seewald, Oliver and Bremser, Wolfgang}, year={2022} }","ama":"Dogan D, Ruthmann S, Seewald O, Bremser W. Tuning of antifouling active PDMS domains tethered to epoxy/amine surface. <i>Progress in Organic Coatings</i>. 2022;170. doi:<a href=\"https://doi.org/10.1016/j.porgcoat.2022.106977\">10.1016/j.porgcoat.2022.106977</a>","mla":"Dogan, Deniz, et al. “Tuning of Antifouling Active PDMS Domains Tethered to Epoxy/Amine Surface.” <i>Progress in Organic Coatings</i>, vol. 170, 106977, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.porgcoat.2022.106977\">10.1016/j.porgcoat.2022.106977</a>.","short":"D. Dogan, S. Ruthmann, O. Seewald, W. Bremser, Progress in Organic Coatings 170 (2022).","chicago":"Dogan, Deniz, Simon Ruthmann, Oliver Seewald, and Wolfgang Bremser. “Tuning of Antifouling Active PDMS Domains Tethered to Epoxy/Amine Surface.” <i>Progress in Organic Coatings</i> 170 (2022). <a href=\"https://doi.org/10.1016/j.porgcoat.2022.106977\">https://doi.org/10.1016/j.porgcoat.2022.106977</a>.","ieee":"D. Dogan, S. Ruthmann, O. Seewald, and W. Bremser, “Tuning of antifouling active PDMS domains tethered to epoxy/amine surface,” <i>Progress in Organic Coatings</i>, vol. 170, Art. no. 106977, 2022, doi: <a href=\"https://doi.org/10.1016/j.porgcoat.2022.106977\">10.1016/j.porgcoat.2022.106977</a>.","apa":"Dogan, D., Ruthmann, S., Seewald, O., &#38; Bremser, W. (2022). Tuning of antifouling active PDMS domains tethered to epoxy/amine surface. <i>Progress in Organic Coatings</i>, <i>170</i>, Article 106977. <a href=\"https://doi.org/10.1016/j.porgcoat.2022.106977\">https://doi.org/10.1016/j.porgcoat.2022.106977</a>"}},{"citation":{"short":"N.F. Torkaman, M. Kley, W. Bremser, R. Wilhelm, RSC Advances 12 (2022) 17249–17256.","chicago":"Torkaman, Najmeh Filvan, Marina Kley, Wolfgang Bremser, and René Wilhelm. “Reversible Functionalization and Exfoliation of Graphite by a Diels–Alder Reaction with Furfuryl Amine.” <i>RSC Advances</i> 12, no. 27 (2022): 17249–56. <a href=\"https://doi.org/10.1039/d2ra02566c\">https://doi.org/10.1039/d2ra02566c</a>.","ieee":"N. F. Torkaman, M. Kley, W. Bremser, and R. Wilhelm, “Reversible functionalization and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine,” <i>RSC Advances</i>, vol. 12, no. 27, pp. 17249–17256, 2022, doi: <a href=\"https://doi.org/10.1039/d2ra02566c\">10.1039/d2ra02566c</a>.","apa":"Torkaman, N. F., Kley, M., Bremser, W., &#38; Wilhelm, R. (2022). Reversible functionalization and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine. <i>RSC Advances</i>, <i>12</i>(27), 17249–17256. <a href=\"https://doi.org/10.1039/d2ra02566c\">https://doi.org/10.1039/d2ra02566c</a>","bibtex":"@article{Torkaman_Kley_Bremser_Wilhelm_2022, title={Reversible functionalization and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine}, volume={12}, DOI={<a href=\"https://doi.org/10.1039/d2ra02566c\">10.1039/d2ra02566c</a>}, number={27}, journal={RSC Advances}, publisher={Royal Society of Chemistry (RSC)}, author={Torkaman, Najmeh Filvan and Kley, Marina and Bremser, Wolfgang and Wilhelm, René}, year={2022}, pages={17249–17256} }","ama":"Torkaman NF, Kley M, Bremser W, Wilhelm R. Reversible functionalization and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine. <i>RSC Advances</i>. 2022;12(27):17249-17256. doi:<a href=\"https://doi.org/10.1039/d2ra02566c\">10.1039/d2ra02566c</a>","mla":"Torkaman, Najmeh Filvan, et al. “Reversible Functionalization and Exfoliation of Graphite by a Diels–Alder Reaction with Furfuryl Amine.” <i>RSC Advances</i>, vol. 12, no. 27, Royal Society of Chemistry (RSC), 2022, pp. 17249–56, doi:<a href=\"https://doi.org/10.1039/d2ra02566c\">10.1039/d2ra02566c</a>."},"status":"public","page":"17249-17256","_id":"41810","publisher":"Royal Society of Chemistry (RSC)","user_id":"32","volume":12,"issue":"27","publication":"RSC Advances","abstract":[{"text":"<jats:p>Furfuryl amine-functionalized few-layered graphene was prepared <jats:italic>via</jats:italic> a mechanochemical process by a [4 + 2] cycloaddition under solvent-free conditions.</jats:p>","lang":"eng"}],"date_created":"2023-02-06T10:30:40Z","keyword":["General Chemical Engineering","General Chemistry"],"type":"journal_article","department":[{"_id":"301"},{"_id":"321"}],"year":"2022","title":"Reversible functionalization and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine","publication_identifier":{"issn":["2046-2069"]},"author":[{"full_name":"Torkaman, Najmeh Filvan","last_name":"Torkaman","first_name":"Najmeh Filvan"},{"full_name":"Kley, Marina","first_name":"Marina","last_name":"Kley"},{"first_name":"Wolfgang","last_name":"Bremser","full_name":"Bremser, Wolfgang"},{"first_name":"René","last_name":"Wilhelm","full_name":"Wilhelm, René"}],"date_updated":"2023-02-06T10:33:03Z","publication_status":"published","intvolume":"        12","language":[{"iso":"eng"}],"doi":"10.1039/d2ra02566c"},{"publication":"Applied Surface Science","abstract":[{"lang":"eng","text":"Near ambient pressure XPS in nitrogen atmosphere was utilized to investigate gas-solid interactions within porous SiO2 films ranging from 30 to 75 nm thickness. The films were differentiated in terms of porosity and roughness. The XPS N1s core levels of the N2 gas in presence of the SiO2 samples showed variations in width, binding energy and line shape. The width correlated with the surface charge induced in the dielectric films upon X-ray irradiation. The observed different binding energies observed for the N1s peak can only partly be associated with intrinsic work function differences between the samples, opening the possibility that the effect of physisorption at room temperature could be detected by a shift in the measured binding energy. However, the signals also show an increasing asymmetry with rising surface charge. This might be associated with the formation of vertical electrical gradients within the dielectric porous thin films, which complicates the assignment of binding energy positions to specific surface-related effects. With the support of Monte Carlo and first principles density functional theory calculations, the observed shifts were discussed in terms of the possible formation of transitory dipoles upon N2 physisorption within the porous SiO2 films."}],"date_created":"2022-10-11T08:22:25Z","keyword":["Surfaces","Coatings and Films","Condensed Matter Physics","Surfaces and Interfaces","General Physics and Astronomy","General Chemistry"],"type":"journal_article","department":[{"_id":"613"},{"_id":"35"},{"_id":"2"},{"_id":"307"},{"_id":"302"},{"_id":"304"}],"year":"2022","title":"Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS","author":[{"first_name":"Teresa","last_name":"de los Arcos","full_name":"de los Arcos, Teresa"},{"id":"11848","last_name":"Weinberger","first_name":"Christian","full_name":"Weinberger, Christian"},{"id":"14757","full_name":"Zysk, Frederik","first_name":"Frederik","last_name":"Zysk"},{"first_name":"Varun","last_name":"Raj Damerla","full_name":"Raj Damerla, Varun"},{"first_name":"Sabrina","last_name":"Kollmann","full_name":"Kollmann, Sabrina"},{"full_name":"Vieth, Pascal","last_name":"Vieth","first_name":"Pascal"},{"orcid":"0000-0003-1711-2722","first_name":"Michael","last_name":"Tiemann","full_name":"Tiemann, Michael","id":"23547"},{"full_name":"Kühne, Thomas","last_name":"Kühne","first_name":"Thomas","id":"49079"},{"full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido","id":"194"}],"publication_identifier":{"issn":["0169-4332"]},"date_updated":"2023-03-03T11:32:04Z","publication_status":"published","intvolume":"       604","article_type":"original","article_number":"154525","language":[{"iso":"eng"}],"doi":"10.1016/j.apsusc.2022.154525","citation":{"short":"T. de los Arcos, C. Weinberger, F. Zysk, V. Raj Damerla, S. Kollmann, P. Vieth, M. Tiemann, T. Kühne, G. Grundmeier, Applied Surface Science 604 (2022).","chicago":"Arcos, Teresa de los, Christian Weinberger, Frederik Zysk, Varun Raj Damerla, Sabrina Kollmann, Pascal Vieth, Michael Tiemann, Thomas Kühne, and Guido Grundmeier. “Challenges in the Interpretation of Gas Core Levels for the Determination of Gas-Solid Interactions within Dielectric Porous Films by Ambient Pressure XPS.” <i>Applied Surface Science</i> 604 (2022). <a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">https://doi.org/10.1016/j.apsusc.2022.154525</a>.","apa":"de los Arcos, T., Weinberger, C., Zysk, F., Raj Damerla, V., Kollmann, S., Vieth, P., Tiemann, M., Kühne, T., &#38; Grundmeier, G. (2022). Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS. <i>Applied Surface Science</i>, <i>604</i>, Article 154525. <a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">https://doi.org/10.1016/j.apsusc.2022.154525</a>","ieee":"T. de los Arcos <i>et al.</i>, “Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS,” <i>Applied Surface Science</i>, vol. 604, Art. no. 154525, 2022, doi: <a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>.","ama":"de los Arcos T, Weinberger C, Zysk F, et al. Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS. <i>Applied Surface Science</i>. 2022;604. doi:<a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>","bibtex":"@article{de los Arcos_Weinberger_Zysk_Raj Damerla_Kollmann_Vieth_Tiemann_Kühne_Grundmeier_2022, title={Challenges in the interpretation of gas core levels for the determination of gas-solid interactions within dielectric porous films by ambient pressure XPS}, volume={604}, DOI={<a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>}, number={154525}, journal={Applied Surface Science}, publisher={Elsevier BV}, author={de los Arcos, Teresa and Weinberger, Christian and Zysk, Frederik and Raj Damerla, Varun and Kollmann, Sabrina and Vieth, Pascal and Tiemann, Michael and Kühne, Thomas and Grundmeier, Guido}, year={2022} }","mla":"de los Arcos, Teresa, et al. “Challenges in the Interpretation of Gas Core Levels for the Determination of Gas-Solid Interactions within Dielectric Porous Films by Ambient Pressure XPS.” <i>Applied Surface Science</i>, vol. 604, 154525, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.apsusc.2022.154525\">10.1016/j.apsusc.2022.154525</a>."},"quality_controlled":"1","status":"public","publisher":"Elsevier BV","_id":"33691","user_id":"23547","volume":604},{"publication":"Phys. Rev. Materials","date_created":"2022-10-31T15:00:19Z","file":[{"access_level":"closed","file_size":3945388,"file_name":"PhysRevMaterials.6.105401.pdf","date_updated":"2022-10-31T15:05:24Z","relation":"main_file","content_type":"application/pdf","success":1,"file_id":"33966","creator":"adrianab","date_created":"2022-10-31T15:05:24Z"}],"department":[{"_id":"15"},{"_id":"295"},{"_id":"230"},{"_id":"2"},{"_id":"165"},{"_id":"633"},{"_id":"429"},{"_id":"35"},{"_id":"790"}],"type":"journal_article","author":[{"first_name":"Adriana","last_name":"Bocchini","orcid":"0000-0002-2134-3075","full_name":"Bocchini, Adriana","id":"58349"},{"id":"171","orcid":"0000-0002-4476-223X","last_name":"Gerstmann","first_name":"Uwe","full_name":"Gerstmann, Uwe"},{"last_name":"Bartley","first_name":"Tim","full_name":"Bartley, Tim","id":"49683"},{"full_name":"Steinrück, Hans-Georg","orcid":"0000-0001-6373-0877","last_name":"Steinrück","first_name":"Hans-Georg","id":"84268"},{"full_name":"Henkel, Gerald","first_name":"Gerald","last_name":"Henkel"},{"first_name":"Wolf Gero","last_name":"Schmidt","orcid":"0000-0002-2717-5076","full_name":"Schmidt, Wolf Gero","id":"468"}],"year":"2022","title":"Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory","intvolume":"         6","publication_status":"published","date_updated":"2023-04-21T11:30:08Z","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://journals.aps.org/prmaterials/abstract/10.1103/PhysRevMaterials.6.105401"}],"doi":"10.1103/PhysRevMaterials.6.105401","citation":{"bibtex":"@article{Bocchini_Gerstmann_Bartley_Steinrück_Henkel_Schmidt_2022, title={Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory}, volume={6}, DOI={<a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>}, journal={Phys. Rev. Materials}, publisher={American Physical Society}, author={Bocchini, Adriana and Gerstmann, Uwe and Bartley, Tim and Steinrück, Hans-Georg and Henkel, Gerald and Schmidt, Wolf Gero}, year={2022}, pages={105401} }","ama":"Bocchini A, Gerstmann U, Bartley T, Steinrück H-G, Henkel G, Schmidt WG. Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory. <i>Phys Rev Materials</i>. 2022;6:105401. doi:<a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>","mla":"Bocchini, Adriana, et al. “Electrochemical Performance of KTiOAsO_4 (KTA) in Potassium-Ion Batteries from Density-Functional Theory.” <i>Phys. Rev. Materials</i>, vol. 6, American Physical Society, 2022, p. 105401, doi:<a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>.","short":"A. Bocchini, U. Gerstmann, T. Bartley, H.-G. Steinrück, G. Henkel, W.G. Schmidt, Phys. Rev. Materials 6 (2022) 105401.","chicago":"Bocchini, Adriana, Uwe Gerstmann, Tim Bartley, Hans-Georg Steinrück, Gerald Henkel, and Wolf Gero Schmidt. “Electrochemical Performance of KTiOAsO_4 (KTA) in Potassium-Ion Batteries from Density-Functional Theory.” <i>Phys. Rev. Materials</i> 6 (2022): 105401. <a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">https://doi.org/10.1103/PhysRevMaterials.6.105401</a>.","ieee":"A. Bocchini, U. Gerstmann, T. Bartley, H.-G. Steinrück, G. Henkel, and W. G. Schmidt, “Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory,” <i>Phys. Rev. Materials</i>, vol. 6, p. 105401, 2022, doi: <a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>.","apa":"Bocchini, A., Gerstmann, U., Bartley, T., Steinrück, H.-G., Henkel, G., &#38; Schmidt, W. G. (2022). Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory. <i>Phys. Rev. Materials</i>, <i>6</i>, 105401. <a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">https://doi.org/10.1103/PhysRevMaterials.6.105401</a>"},"file_date_updated":"2022-10-31T15:05:24Z","project":[{"_id":"52","name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing"},{"_id":"53","name":"TRR 142: TRR 142"},{"_id":"55","name":"TRR 142 - B: TRR 142 - Project Area B"},{"name":"TRR 142 - A: TRR 142 - Project Area A","_id":"54"},{"name":"TRR 142 - A11: TRR 142 - Subproject A11","_id":"166"},{"_id":"168","name":"TRR 142 - B07: TRR 142 - Subproject B07"}],"oa":"1","status":"public","has_accepted_license":"1","publisher":"American Physical Society","_id":"33965","page":"105401","volume":6,"user_id":"171","ddc":["530"]},{"page":"185","publisher":"MDPI AG","_id":"40154","user_id":"43720","volume":13,"status":"public","citation":{"mla":"Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” <i>Journal of Functional Biomaterials</i>, vol. 13, no. 4, MDPI AG, 2022, p. 185, doi:<a href=\"https://doi.org/10.3390/jfb13040185\">10.3390/jfb13040185</a>.","ama":"Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. <i>Journal of Functional Biomaterials</i>. 2022;13(4):185. doi:<a href=\"https://doi.org/10.3390/jfb13040185\">10.3390/jfb13040185</a>","bibtex":"@article{Krüger_Hoyer_Huang_Filor_Mateus-Vargas_Oltmanns_Meißner_Grundmeier_Schaper_2022, title={FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability}, volume={13}, DOI={<a href=\"https://doi.org/10.3390/jfb13040185\">10.3390/jfb13040185</a>}, number={4}, journal={Journal of Functional Biomaterials}, publisher={MDPI AG}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Huang, Jingyuan and Filor, Viviane and Mateus-Vargas, Rafael Hernan and Oltmanns, Hilke and Meißner, Jessica and Grundmeier, Guido and Schaper, Mirko}, year={2022}, pages={185} }","apa":"Krüger, J. T., Hoyer, K.-P., Huang, J., Filor, V., Mateus-Vargas, R. H., Oltmanns, H., Meißner, J., Grundmeier, G., &#38; Schaper, M. (2022). FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. <i>Journal of Functional Biomaterials</i>, <i>13</i>(4), 185. <a href=\"https://doi.org/10.3390/jfb13040185\">https://doi.org/10.3390/jfb13040185</a>","ieee":"J. T. Krüger <i>et al.</i>, “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,” <i>Journal of Functional Biomaterials</i>, vol. 13, no. 4, p. 185, 2022, doi: <a href=\"https://doi.org/10.3390/jfb13040185\">10.3390/jfb13040185</a>.","short":"J.T. Krüger, K.-P. Hoyer, J. Huang, V. Filor, R.H. Mateus-Vargas, H. Oltmanns, J. Meißner, G. Grundmeier, M. Schaper, Journal of Functional Biomaterials 13 (2022) 185.","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” <i>Journal of Functional Biomaterials</i> 13, no. 4 (2022): 185. <a href=\"https://doi.org/10.3390/jfb13040185\">https://doi.org/10.3390/jfb13040185</a>."},"quality_controlled":"1","language":[{"iso":"eng"}],"doi":"10.3390/jfb13040185","title":"FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability","year":"2022","author":[{"id":"44307","first_name":"Jan Tobias","last_name":"Krüger","orcid":"0000-0002-0827-9654","full_name":"Krüger, Jan Tobias"},{"last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411"},{"full_name":"Huang, Jingyuan","first_name":"Jingyuan","last_name":"Huang"},{"first_name":"Viviane","last_name":"Filor","full_name":"Filor, Viviane"},{"full_name":"Mateus-Vargas, Rafael Hernan","last_name":"Mateus-Vargas","first_name":"Rafael Hernan"},{"first_name":"Hilke","last_name":"Oltmanns","full_name":"Oltmanns, Hilke"},{"full_name":"Meißner, Jessica","last_name":"Meißner","first_name":"Jessica"},{"id":"194","first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"}],"publication_identifier":{"issn":["2079-4983"]},"date_updated":"2023-04-27T16:39:26Z","publication_status":"published","intvolume":"        13","date_created":"2023-01-26T06:39:42Z","keyword":["Biomedical Engineering","Biomaterials"],"type":"journal_article","department":[{"_id":"302"},{"_id":"158"}],"publication":"Journal of Functional Biomaterials","issue":"4","abstract":[{"text":"<jats:p>The development of bioresorbable materials for temporary implantation enables progress in medical technology. Iron (Fe)-based degradable materials are biocompatible and exhibit good mechanical properties, but their degradation rate is low. Aside from alloying with Manganese (Mn), the creation of phases with high electrochemical potential such as silver (Ag) phases to cause the anodic dissolution of FeMn is promising. However, to enable residue-free dissolution, the Ag needs to be modified. This concern is addressed, as FeMn modified with a degradable Ag-Calcium-Lanthanum (AgCaLa) alloy is investigated. The electrochemical properties and the degradation behavior are determined via a static immersion test. The local differences in electrochemical potential increase the degradation rate (low pH values), and the formation of gaps around the Ag phases (neutral pH values) demonstrates the benefit of the strategy. Nevertheless, the formation of corrosion-inhibiting layers avoids an increased degradation rate under a neutral pH value. The complete bioresorption of the material is possible since the phases of the degradable AgCaLa alloy dissolve after the FeMn matrix. Cell viability tests reveal biocompatibility, and the antibacterial activity of the degradation supernatant is observed. Thus, FeMn modified with degradable AgCaLa phases is promising as a bioresorbable material if corrosion-inhibiting layers can be diminished.</jats:p>","lang":"eng"}]},{"type":"journal_article","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Condensed Matter Physics","General Chemistry"],"department":[{"_id":"302"}],"date_created":"2022-12-21T09:35:17Z","publication":"Surface and Coatings Technology","doi":"10.1016/j.surfcoat.2022.128835","article_number":"128835","language":[{"iso":"eng"}],"date_updated":"2023-04-27T16:40:55Z","publication_status":"published","intvolume":"       447","year":"2022","title":"Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption","author":[{"full_name":"Vieth, P.","first_name":"P.","last_name":"Vieth"},{"last_name":"Garthe","first_name":"M.-A.","full_name":"Garthe, M.-A."},{"full_name":"Voswinkel, Dietrich","last_name":"Voswinkel","first_name":"Dietrich","id":"52634"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"}],"publication_identifier":{"issn":["0257-8972"]},"quality_controlled":"1","citation":{"ama":"Vieth P, Garthe M-A, Voswinkel D, Schaper M, Grundmeier G. Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption. <i>Surface and Coatings Technology</i>. 2022;447. doi:<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128835\">10.1016/j.surfcoat.2022.128835</a>","bibtex":"@article{Vieth_Garthe_Voswinkel_Schaper_Grundmeier_2022, title={Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption}, volume={447}, DOI={<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128835\">10.1016/j.surfcoat.2022.128835</a>}, number={128835}, journal={Surface and Coatings Technology}, publisher={Elsevier BV}, author={Vieth, P. and Garthe, M.-A. and Voswinkel, Dietrich and Schaper, Mirko and Grundmeier, Guido}, year={2022} }","mla":"Vieth, P., et al. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075-T6 Alloy by Aminophosphonic Acid Adsorption.” <i>Surface and Coatings Technology</i>, vol. 447, 128835, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128835\">10.1016/j.surfcoat.2022.128835</a>.","chicago":"Vieth, P., M.-A. Garthe, Dietrich Voswinkel, Mirko Schaper, and Guido Grundmeier. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075-T6 Alloy by Aminophosphonic Acid Adsorption.” <i>Surface and Coatings Technology</i> 447 (2022). <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128835\">https://doi.org/10.1016/j.surfcoat.2022.128835</a>.","short":"P. Vieth, M.-A. Garthe, D. Voswinkel, M. Schaper, G. Grundmeier, Surface and Coatings Technology 447 (2022).","apa":"Vieth, P., Garthe, M.-A., Voswinkel, D., Schaper, M., &#38; Grundmeier, G. (2022). Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption. <i>Surface and Coatings Technology</i>, <i>447</i>, Article 128835. <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128835\">https://doi.org/10.1016/j.surfcoat.2022.128835</a>","ieee":"P. Vieth, M.-A. Garthe, D. Voswinkel, M. Schaper, and G. Grundmeier, “Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption,” <i>Surface and Coatings Technology</i>, vol. 447, Art. no. 128835, 2022, doi: <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128835\">10.1016/j.surfcoat.2022.128835</a>."},"user_id":"43720","volume":447,"publisher":"Elsevier BV","_id":"34652","status":"public"},{"citation":{"mla":"Huang, Jingyuan, et al. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” <i>Corrosion Science</i>, vol. 200, Elsevier BV, 2022, p. 110186, doi:<a href=\"https://doi.org/10.1016/j.corsci.2022.110186\">10.1016/j.corsci.2022.110186</a>.","bibtex":"@article{Huang_Orive_Krüger_Hoyer_Keller_Grundmeier_2022, title={Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes}, volume={200}, DOI={<a href=\"https://doi.org/10.1016/j.corsci.2022.110186\">10.1016/j.corsci.2022.110186</a>}, journal={Corrosion Science}, publisher={Elsevier BV}, author={Huang, Jingyuan and Orive, Alejandro Gonzalez and Krüger, Jan Tobias and Hoyer, Kay-Peter and Keller, Adrian and Grundmeier, Guido}, year={2022}, pages={110186} }","ama":"Huang J, Orive AG, Krüger JT, Hoyer K-P, Keller A, Grundmeier G. Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. <i>Corrosion Science</i>. 2022;200:110186. doi:<a href=\"https://doi.org/10.1016/j.corsci.2022.110186\">10.1016/j.corsci.2022.110186</a>","ieee":"J. Huang, A. G. Orive, J. T. Krüger, K.-P. Hoyer, A. Keller, and G. Grundmeier, “Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes,” <i>Corrosion Science</i>, vol. 200, p. 110186, 2022, doi: <a href=\"https://doi.org/10.1016/j.corsci.2022.110186\">10.1016/j.corsci.2022.110186</a>.","apa":"Huang, J., Orive, A. G., Krüger, J. T., Hoyer, K.-P., Keller, A., &#38; Grundmeier, G. (2022). Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes. <i>Corrosion Science</i>, <i>200</i>, 110186. <a href=\"https://doi.org/10.1016/j.corsci.2022.110186\">https://doi.org/10.1016/j.corsci.2022.110186</a>","short":"J. Huang, A.G. Orive, J.T. Krüger, K.-P. Hoyer, A. Keller, G. Grundmeier, Corrosion Science 200 (2022) 110186.","chicago":"Huang, Jingyuan, Alejandro Gonzalez Orive, Jan Tobias Krüger, Kay-Peter Hoyer, Adrian Keller, and Guido Grundmeier. “Influence of Proteins on the Corrosion of a Conventional and Selective Laser Beam Melted FeMn Alloy in Physiological Electrolytes.” <i>Corrosion Science</i> 200 (2022): 110186. <a href=\"https://doi.org/10.1016/j.corsci.2022.110186\">https://doi.org/10.1016/j.corsci.2022.110186</a>."},"quality_controlled":"1","status":"public","page":"110186","publisher":"Elsevier BV","_id":"30103","user_id":"48411","volume":200,"publication":"Corrosion Science","date_created":"2022-02-25T09:32:43Z","keyword":["General Materials Science","General Chemical Engineering","General Chemistry"],"type":"journal_article","department":[{"_id":"302"},{"_id":"158"}],"title":"Influence of proteins on the corrosion of a conventional and selective laser beam melted FeMn alloy in physiological electrolytes","year":"2022","author":[{"first_name":"Jingyuan","last_name":"Huang","full_name":"Huang, Jingyuan"},{"first_name":"Alejandro Gonzalez","last_name":"Orive","full_name":"Orive, Alejandro Gonzalez"},{"id":"44307","orcid":"0000-0002-0827-9654","first_name":"Jan Tobias","last_name":"Krüger","full_name":"Krüger, Jan Tobias"},{"last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411"},{"id":"48864","full_name":"Keller, Adrian","last_name":"Keller","orcid":"0000-0001-7139-3110","first_name":"Adrian"},{"id":"194","first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido"}],"publication_identifier":{"issn":["0010-938X"]},"publication_status":"published","date_updated":"2023-04-27T16:47:42Z","intvolume":"       200","language":[{"iso":"eng"}],"doi":"10.1016/j.corsci.2022.110186"},{"date_created":"2022-12-21T09:35:47Z","department":[{"_id":"302"}],"keyword":["General Medicine"],"type":"journal_article","publication":"Procedia CIRP","language":[{"iso":"eng"}],"doi":"10.1016/j.procir.2022.08.046","author":[{"full_name":"Kusoglu, Ihsan Murat","first_name":"Ihsan Murat","last_name":"Kusoglu"},{"last_name":"Vieth","first_name":"Pascal","full_name":"Vieth, Pascal"},{"full_name":"Heiland, Steffen","last_name":"Heiland","first_name":"Steffen","id":"77250"},{"full_name":"Huber, Florian","last_name":"Huber","first_name":"Florian"},{"full_name":"Lüddecke, Arne","last_name":"Lüddecke","first_name":"Arne"},{"first_name":"Anna Rosa","last_name":"Ziefuss","full_name":"Ziefuss, Anna Rosa"},{"full_name":"Kwade, Arno","first_name":"Arno","last_name":"Kwade"},{"first_name":"Michael","last_name":"Schmidt","full_name":"Schmidt, Michael"},{"id":"43720","first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko"},{"full_name":"Barcikowski, Stephan","first_name":"Stephan","last_name":"Barcikowski"},{"id":"194","full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido"}],"publication_identifier":{"issn":["2212-8271"]},"title":"Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts","year":"2022","intvolume":"       111","date_updated":"2023-04-28T09:00:53Z","publication_status":"published","citation":{"bibtex":"@article{Kusoglu_Vieth_Heiland_Huber_Lüddecke_Ziefuss_Kwade_Schmidt_Schaper_Barcikowski_et al._2022, title={Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts}, volume={111}, DOI={<a href=\"https://doi.org/10.1016/j.procir.2022.08.046\">10.1016/j.procir.2022.08.046</a>}, journal={Procedia CIRP}, publisher={Elsevier BV}, author={Kusoglu, Ihsan Murat and Vieth, Pascal and Heiland, Steffen and Huber, Florian and Lüddecke, Arne and Ziefuss, Anna Rosa and Kwade, Arno and Schmidt, Michael and Schaper, Mirko and Barcikowski, Stephan and et al.}, year={2022}, pages={10–13} }","ama":"Kusoglu IM, Vieth P, Heiland S, et al. Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts. <i>Procedia CIRP</i>. 2022;111:10-13. doi:<a href=\"https://doi.org/10.1016/j.procir.2022.08.046\">10.1016/j.procir.2022.08.046</a>","mla":"Kusoglu, Ihsan Murat, et al. “Microstructure and Corrosion Properties of PBF-LB Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.” <i>Procedia CIRP</i>, vol. 111, Elsevier BV, 2022, pp. 10–13, doi:<a href=\"https://doi.org/10.1016/j.procir.2022.08.046\">10.1016/j.procir.2022.08.046</a>.","chicago":"Kusoglu, Ihsan Murat, Pascal Vieth, Steffen Heiland, Florian Huber, Arne Lüddecke, Anna Rosa Ziefuss, Arno Kwade, et al. “Microstructure and Corrosion Properties of PBF-LB Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.” <i>Procedia CIRP</i> 111 (2022): 10–13. <a href=\"https://doi.org/10.1016/j.procir.2022.08.046\">https://doi.org/10.1016/j.procir.2022.08.046</a>.","short":"I.M. Kusoglu, P. Vieth, S. Heiland, F. Huber, A. Lüddecke, A.R. Ziefuss, A. Kwade, M. Schmidt, M. Schaper, S. Barcikowski, G. Grundmeier, Procedia CIRP 111 (2022) 10–13.","ieee":"I. M. Kusoglu <i>et al.</i>, “Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts,” <i>Procedia CIRP</i>, vol. 111, pp. 10–13, 2022, doi: <a href=\"https://doi.org/10.1016/j.procir.2022.08.046\">10.1016/j.procir.2022.08.046</a>.","apa":"Kusoglu, I. M., Vieth, P., Heiland, S., Huber, F., Lüddecke, A., Ziefuss, A. R., Kwade, A., Schmidt, M., Schaper, M., Barcikowski, S., &#38; Grundmeier, G. (2022). Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts. <i>Procedia CIRP</i>, <i>111</i>, 10–13. <a href=\"https://doi.org/10.1016/j.procir.2022.08.046\">https://doi.org/10.1016/j.procir.2022.08.046</a>"},"quality_controlled":"1","publisher":"Elsevier BV","_id":"34654","page":"10-13","volume":111,"user_id":"43720","status":"public"},{"department":[{"_id":"633"}],"keyword":["Pollution","Nuclear Energy and Engineering","Renewable Energy","Sustainability and the Environment","Environmental Chemistry"],"type":"journal_article","date_created":"2022-10-20T12:24:37Z","abstract":[{"lang":"eng","text":"<jats:p>Elucidating and quantifying the effects of doping on halide perovskites using lithium ion batteries.</jats:p>"}],"issue":"10","publication":"Energy & Environmental Science","doi":"10.1039/d2ee01754g","language":[{"iso":"eng"}],"intvolume":"        15","publication_status":"published","date_updated":"2023-05-19T12:32:32Z","publication_identifier":{"issn":["1754-5692","1754-5706"]},"author":[{"full_name":"Mathieson, Angus G. M.","first_name":"Angus G. M.","last_name":"Mathieson"},{"first_name":"Wesley M.","last_name":"Dose","full_name":"Dose, Wesley M."},{"full_name":"Steinrück, Hans-Georg","last_name":"Steinrück","orcid":"0000-0001-6373-0877","first_name":"Hans-Georg","id":"84268"},{"first_name":"Christopher J.","last_name":"Takacs","full_name":"Takacs, Christopher J."},{"full_name":"Feldmann, Sascha","last_name":"Feldmann","first_name":"Sascha"},{"first_name":"Raj","last_name":"Pandya","full_name":"Pandya, Raj"},{"full_name":"Merryweather, Alice J.","last_name":"Merryweather","first_name":"Alice J."},{"last_name":"Mackanic","first_name":"David","full_name":"Mackanic, David"},{"first_name":"Akshay","last_name":"Rao","full_name":"Rao, Akshay"},{"full_name":"Deschler, Felix","first_name":"Felix","last_name":"Deschler"},{"full_name":"De Volder, Michael","last_name":"De Volder","first_name":"Michael"}],"year":"2022","title":"A mechanistic study of the dopant-induced breakdown in halide perovskites using solid state energy storage devices","citation":{"apa":"Mathieson, A. G. M., Dose, W. M., Steinrück, H.-G., Takacs, C. J., Feldmann, S., Pandya, R., Merryweather, A. J., Mackanic, D., Rao, A., Deschler, F., &#38; De Volder, M. (2022). A mechanistic study of the dopant-induced breakdown in halide perovskites using solid state energy storage devices. <i>Energy &#38; Environmental Science</i>, <i>15</i>(10), 4323–4337. <a href=\"https://doi.org/10.1039/d2ee01754g\">https://doi.org/10.1039/d2ee01754g</a>","ieee":"A. G. M. Mathieson <i>et al.</i>, “A mechanistic study of the dopant-induced breakdown in halide perovskites using solid state energy storage devices,” <i>Energy &#38; Environmental Science</i>, vol. 15, no. 10, pp. 4323–4337, 2022, doi: <a href=\"https://doi.org/10.1039/d2ee01754g\">10.1039/d2ee01754g</a>.","chicago":"Mathieson, Angus G. M., Wesley M. Dose, Hans-Georg Steinrück, Christopher J. Takacs, Sascha Feldmann, Raj Pandya, Alice J. Merryweather, et al. “A Mechanistic Study of the Dopant-Induced Breakdown in Halide Perovskites Using Solid State Energy Storage Devices.” <i>Energy &#38; Environmental Science</i> 15, no. 10 (2022): 4323–37. <a href=\"https://doi.org/10.1039/d2ee01754g\">https://doi.org/10.1039/d2ee01754g</a>.","short":"A.G.M. Mathieson, W.M. Dose, H.-G. Steinrück, C.J. Takacs, S. Feldmann, R. Pandya, A.J. Merryweather, D. Mackanic, A. Rao, F. Deschler, M. De Volder, Energy &#38; Environmental Science 15 (2022) 4323–4337.","mla":"Mathieson, Angus G. M., et al. “A Mechanistic Study of the Dopant-Induced Breakdown in Halide Perovskites Using Solid State Energy Storage Devices.” <i>Energy &#38; Environmental Science</i>, vol. 15, no. 10, Royal Society of Chemistry (RSC), 2022, pp. 4323–37, doi:<a href=\"https://doi.org/10.1039/d2ee01754g\">10.1039/d2ee01754g</a>.","ama":"Mathieson AGM, Dose WM, Steinrück H-G, et al. A mechanistic study of the dopant-induced breakdown in halide perovskites using solid state energy storage devices. <i>Energy &#38; Environmental Science</i>. 2022;15(10):4323-4337. doi:<a href=\"https://doi.org/10.1039/d2ee01754g\">10.1039/d2ee01754g</a>","bibtex":"@article{Mathieson_Dose_Steinrück_Takacs_Feldmann_Pandya_Merryweather_Mackanic_Rao_Deschler_et al._2022, title={A mechanistic study of the dopant-induced breakdown in halide perovskites using solid state energy storage devices}, volume={15}, DOI={<a href=\"https://doi.org/10.1039/d2ee01754g\">10.1039/d2ee01754g</a>}, number={10}, journal={Energy &#38; Environmental Science}, publisher={Royal Society of Chemistry (RSC)}, author={Mathieson, Angus G. M. and Dose, Wesley M. and Steinrück, Hans-Georg and Takacs, Christopher J. and Feldmann, Sascha and Pandya, Raj and Merryweather, Alice J. and Mackanic, David and Rao, Akshay and Deschler, Felix and et al.}, year={2022}, pages={4323–4337} }"},"volume":15,"user_id":"84268","publisher":"Royal Society of Chemistry (RSC)","_id":"33834","page":"4323-4337","status":"public"},{"citation":{"apa":"Bobzin, K., Kalscheuer, C., Grundmeier, G., Kollmann, S., Carlet, M., &#38; de los Arcos de Pedro, M. T. (2022). Oxidation stability of chromium aluminum oxynitride hard coatings. <i>Surface and Coatings Technology</i>, <i>449</i>, Article 128927. <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">https://doi.org/10.1016/j.surfcoat.2022.128927</a>","mla":"Bobzin, K., et al. “Oxidation Stability of Chromium Aluminum Oxynitride Hard Coatings.” <i>Surface and Coatings Technology</i>, vol. 449, 128927, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>.","ieee":"K. Bobzin, C. Kalscheuer, G. Grundmeier, S. Kollmann, M. Carlet, and M. T. de los Arcos de Pedro, “Oxidation stability of chromium aluminum oxynitride hard coatings,” <i>Surface and Coatings Technology</i>, vol. 449, Art. no. 128927, 2022, doi: <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>.","ama":"Bobzin K, Kalscheuer C, Grundmeier G, Kollmann S, Carlet M, de los Arcos de Pedro MT. Oxidation stability of chromium aluminum oxynitride hard coatings. <i>Surface and Coatings Technology</i>. 2022;449. doi:<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>","short":"K. Bobzin, C. Kalscheuer, G. Grundmeier, S. Kollmann, M. Carlet, M.T. de los Arcos de Pedro, Surface and Coatings Technology 449 (2022).","chicago":"Bobzin, K., C. Kalscheuer, Guido Grundmeier, S. Kollmann, M. Carlet, and Maria Teresa de los Arcos de Pedro. “Oxidation Stability of Chromium Aluminum Oxynitride Hard Coatings.” <i>Surface and Coatings Technology</i> 449 (2022). <a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">https://doi.org/10.1016/j.surfcoat.2022.128927</a>.","bibtex":"@article{Bobzin_Kalscheuer_Grundmeier_Kollmann_Carlet_de los Arcos de Pedro_2022, title={Oxidation stability of chromium aluminum oxynitride hard coatings}, volume={449}, DOI={<a href=\"https://doi.org/10.1016/j.surfcoat.2022.128927\">10.1016/j.surfcoat.2022.128927</a>}, number={128927}, journal={Surface and Coatings Technology}, publisher={Elsevier BV}, author={Bobzin, K. and Kalscheuer, C. and Grundmeier, Guido and Kollmann, S. and Carlet, M. and de los Arcos de Pedro, Maria Teresa}, year={2022} }"},"status":"public","user_id":"54556","volume":449,"_id":"46479","publisher":"Elsevier BV","publication":"Surface and Coatings Technology","type":"journal_article","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Condensed Matter Physics","General Chemistry"],"department":[{"_id":"302"}],"date_created":"2023-08-11T14:08:33Z","publication_status":"published","date_updated":"2023-08-11T14:13:27Z","intvolume":"       449","year":"2022","title":"Oxidation stability of chromium aluminum oxynitride hard coatings","author":[{"full_name":"Bobzin, K.","first_name":"K.","last_name":"Bobzin"},{"first_name":"C.","last_name":"Kalscheuer","full_name":"Kalscheuer, C."},{"id":"194","full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido"},{"full_name":"Kollmann, S.","last_name":"Kollmann","first_name":"S."},{"first_name":"M.","last_name":"Carlet","full_name":"Carlet, M."},{"id":"54556","last_name":"de los Arcos de Pedro","first_name":"Maria Teresa","full_name":"de los Arcos de Pedro, Maria Teresa"}],"publication_identifier":{"issn":["0257-8972"]},"doi":"10.1016/j.surfcoat.2022.128927","article_number":"128927","language":[{"iso":"eng"}]},{"citation":{"bibtex":"@article{Torrent_Krooß_Huang_Voigt_Ebbert_Knust_Grundmeier_Niendorf_2022, title={Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties}, volume={1}, DOI={<a href=\"https://doi.org/10.3390/alloys1010004\">10.3390/alloys1010004</a>}, number={1}, journal={Alloys}, publisher={MDPI AG}, author={Torrent, Christof J. J. and Krooß, Philipp and Huang, Jingyuan and Voigt, Markus and Ebbert, Christoph and Knust, Steffen and Grundmeier, Guido and Niendorf, Thomas}, year={2022}, pages={31–53} }","ama":"Torrent CJJ, Krooß P, Huang J, et al. Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties. <i>Alloys</i>. 2022;1(1):31-53. doi:<a href=\"https://doi.org/10.3390/alloys1010004\">10.3390/alloys1010004</a>","mla":"Torrent, Christof J. J., et al. “Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties.” <i>Alloys</i>, vol. 1, no. 1, MDPI AG, 2022, pp. 31–53, doi:<a href=\"https://doi.org/10.3390/alloys1010004\">10.3390/alloys1010004</a>.","chicago":"Torrent, Christof J. J., Philipp Krooß, Jingyuan Huang, Markus Voigt, Christoph Ebbert, Steffen Knust, Guido Grundmeier, and Thomas Niendorf. “Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties.” <i>Alloys</i> 1, no. 1 (2022): 31–53. <a href=\"https://doi.org/10.3390/alloys1010004\">https://doi.org/10.3390/alloys1010004</a>.","short":"C.J.J. Torrent, P. Krooß, J. Huang, M. Voigt, C. Ebbert, S. Knust, G. Grundmeier, T. Niendorf, Alloys 1 (2022) 31–53.","ieee":"C. J. J. Torrent <i>et al.</i>, “Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties,” <i>Alloys</i>, vol. 1, no. 1, pp. 31–53, 2022, doi: <a href=\"https://doi.org/10.3390/alloys1010004\">10.3390/alloys1010004</a>.","apa":"Torrent, C. J. J., Krooß, P., Huang, J., Voigt, M., Ebbert, C., Knust, S., Grundmeier, G., &#38; Niendorf, T. (2022). Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties. <i>Alloys</i>, <i>1</i>(1), 31–53. <a href=\"https://doi.org/10.3390/alloys1010004\">https://doi.org/10.3390/alloys1010004</a>"},"page":"31-53","_id":"62235","publisher":"MDPI AG","user_id":"7266","volume":1,"status":"public","date_created":"2025-11-18T12:01:42Z","type":"journal_article","department":[{"_id":"35"},{"_id":"302"},{"_id":"321"}],"publication":"Alloys","issue":"1","abstract":[{"lang":"eng","text":"<jats:p>Additive manufacturing (AM) processes are not solely used where maximum design freedom meets low lot sizes. Direct microstructure design and topology optimization can be realized concomitantly during processing by adjusting the geometry, the material composition, and the solidification behavior of the material considered. However, when complex specific requirements have to be met, a targeted part design is highly challenging. In the field of biodegradable implant surgery, a cytocompatible material of an application-adapted shape has to be characterized by a specific degradation behavior and reliably predictable mechanical properties. For instance, small amounts of oxides can have a significant effect on microstructural development, thus likewise affecting the strength and corrosion behavior of the processed material. In the present study, biocompatible pure Fe was processed using electron powder bed fusion (E-PBF). Two different modifications of the Fe were processed by incorporating Fe oxide and Ce oxide in different proportions in order to assess their impact on the microstructural evolution, the mechanical response and the corrosion behavior. The quasistatic mechanical and chemical properties were analyzed and correlated with the final microstructural appearance.</jats:p>"}],"language":[{"iso":"eng"}],"doi":"10.3390/alloys1010004","title":"Oxide Modified Iron in Electron Beam Powder Bed Fusion—From Processability to Corrosion Properties","year":"2022","author":[{"last_name":"Torrent","first_name":"Christof J. J.","full_name":"Torrent, Christof J. J."},{"first_name":"Philipp","last_name":"Krooß","full_name":"Krooß, Philipp"},{"full_name":"Huang, Jingyuan","last_name":"Huang","first_name":"Jingyuan"},{"id":"15182","last_name":"Voigt","first_name":"Markus","full_name":"Voigt, Markus"},{"full_name":"Ebbert, Christoph","last_name":"Ebbert","first_name":"Christoph","id":"7266"},{"last_name":"Knust","first_name":"Steffen","full_name":"Knust, Steffen"},{"full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido","id":"194"},{"last_name":"Niendorf","first_name":"Thomas","full_name":"Niendorf, Thomas"}],"publication_identifier":{"issn":["2674-063X"]},"publication_status":"published","date_updated":"2025-11-18T12:04:45Z","intvolume":"         1"}]