[{"abstract":[{"text":"The influence of selective laser sintering (SLS) parameters on PA12 part properties is well known, but research on other materials is rare. One alternative material is a thermoplastic elastomer (TPE) called PrimePart ST that is more elastic and shows a distinct SLS processing behavior. It undergoes a three-dimensional temperature distribution during the SLS process within the TPE part cake. To examine this further, a temperature measurement system that allows temperature measurements inside the part cake is applied to TPE in the present work. Position-dependent temperature histories are directly correlated with the color and mechanical properties of built parts and are in very good agreement with artificial heat treatment in a furnace. Furthermore, it is clearly shown that the yellowish discoloration of parts in different intensities is not only temperature dependent but also influenced by the residual oxygen content in the process atmosphere. Nevertheless, the discoloration has no influence on the mechanical part properties.","lang":"eng"}],"citation":{"ieee":"C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” <i>Journal of Minerals, Metals and Materials Society</i>, vol. 70, no. 3, pp. 425–430, 2018.","apa":"Kummert, C., Josupeit, S., &#38; Schmid, H.-J. (2018). Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung. <i>Journal of Minerals, Metals and Materials Society</i>, <i>70</i>(3), 425–430. <a href=\"https://doi.org/10.1007/s11837-017-2658-2\">https://doi.org/10.1007/s11837-017-2658-2</a>","short":"C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials Society 70 (2018) 425–430.","chicago":"Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.” <i>Journal of Minerals, Metals and Materials Society</i> 70, no. 3 (2018): 425–30. <a href=\"https://doi.org/10.1007/s11837-017-2658-2\">https://doi.org/10.1007/s11837-017-2658-2</a>.","mla":"Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.” <i>Journal of Minerals, Metals and Materials Society</i>, vol. 70, no. 3, Springer, 2018, pp. 425–30, doi:<a href=\"https://doi.org/10.1007/s11837-017-2658-2\">10.1007/s11837-017-2658-2</a>.","bibtex":"@article{Kummert_Josupeit_Schmid_2018, title={Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung}, volume={70}, DOI={<a href=\"https://doi.org/10.1007/s11837-017-2658-2\">10.1007/s11837-017-2658-2</a>}, number={3}, journal={Journal of Minerals, Metals and Materials Society}, publisher={Springer}, author={Kummert, Christina and Josupeit, Stefan and Schmid, Hans-Joachim}, year={2018}, pages={425–430} }","ama":"Kummert C, Josupeit S, Schmid H-J. Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung. <i>Journal of Minerals, Metals and Materials Society</i>. 2018;70(3):425-430. doi:<a href=\"https://doi.org/10.1007/s11837-017-2658-2\">10.1007/s11837-017-2658-2</a>"},"issue":"3","publication":"Journal of Minerals, Metals and Materials Society","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"}],"type":"journal_article","date_created":"2021-05-14T07:46:28Z","intvolume":"        70","date_updated":"2022-01-06T06:55:28Z","author":[{"full_name":"Kummert, Christina","first_name":"Christina","last_name":"Kummert"},{"last_name":"Josupeit","first_name":"Stefan","full_name":"Josupeit, Stefan"},{"full_name":"Schmid, Hans-Joachim","last_name":"Schmid","first_name":"Hans-Joachim","id":"464"}],"year":"2018","status":"public","title":"Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung","volume":70,"doi":"10.1007/s11837-017-2658-2","user_id":"71545","_id":"22196","language":[{"iso":"eng"}],"publisher":"Springer","page":"425-430"},{"date_updated":"2022-01-06T06:55:32Z","title":"Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine","status":"public","year":"2018","author":[{"first_name":"Stefan","last_name":"Urbanek","full_name":"Urbanek, Stefan"},{"first_name":"Bernd","last_name":"Ponick","full_name":"Ponick, Bernd"},{"full_name":"Taube, Alexander","last_name":"Taube","first_name":"Alexander"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"id":"13835","last_name":"Lammers","first_name":"Stefan","full_name":"Lammers, Stefan"},{"id":"13956","last_name":"Lieneke","first_name":"Tobias","full_name":"Lieneke, Tobias"},{"id":"604","first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar"}],"user_id":"38077","_id":"22430","language":[{"iso":"eng"}],"publication":"Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250","citation":{"apa":"Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S., … Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In <i>Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>.","ieee":"S. Urbanek <i>et al.</i>, “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in <i>Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>, 2018.","short":"S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T. Lieneke, D. Zimmer, in: Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.","chicago":"Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In <i>Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>, 2018.","mla":"Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” <i>Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>, 2018.","ama":"Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: <i>Conference Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250</i>. ; 2018.","bibtex":"@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018, title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine}, booktitle={Conference paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250}, author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar}, year={2018} }"},"type":"conference","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"date_created":"2021-06-15T11:10:02Z"},{"publication_identifier":{"isbn":["978-3-926494-18-4"]},"author":[{"full_name":"Tominski, Johannes","first_name":"Johannes","last_name":"Tominski"},{"id":"13835","last_name":"Lammers","first_name":"Stefan","full_name":"Lammers, Stefan"}],"status":"public","title":"Software-assisted design check of additive manufactured components","year":"2018","intvolume":"        14","date_updated":"2022-01-06T06:55:33Z","language":[{"iso":"eng"}],"_id":"22433","volume":14,"user_id":"38077","doi":"https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted","citation":{"apa":"Tominski, J., &#38; Lammers, S. (2018). Software-assisted design check of additive manufactured components. In <i>14th PERMAS Users’ Conference</i> (Vol. 14). <a href=\"https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted\">https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted</a>","ieee":"J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured components,” in <i>14th PERMAS Users’ Conference</i>, 2018, vol. 14.","chicago":"Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.” In <i>14th PERMAS Users’ Conference</i>, Vol. 14, 2018. <a href=\"https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted\">https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted</a>.","short":"J. Tominski, S. Lammers, in: 14th PERMAS Users’ Conference, 2018.","mla":"Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of Additive Manufactured Components.” <i>14th PERMAS Users’ Conference</i>, vol. 14, 2018, doi:<a href=\"https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted\">https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted</a>.","ama":"Tominski J, Lammers S. Software-assisted design check of additive manufactured components. In: <i>14th PERMAS Users’ Conference</i>. Vol 14. ; 2018. doi:<a href=\"https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted\">https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted</a>","bibtex":"@inproceedings{Tominski_Lammers_2018, title={Software-assisted design check of additive manufactured components}, volume={14}, DOI={<a href=\"https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted\">https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted</a>}, booktitle={14th PERMAS Users’ Conference}, author={Tominski, Johannes and Lammers, Stefan}, year={2018} }"},"publication":"14th PERMAS Users' Conference","date_created":"2021-06-15T11:10:05Z","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"conference"},{"language":[{"iso":"eng"}],"_id":"22434","volume":29,"doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf","user_id":"38077","author":[{"first_name":"Johannes","last_name":"Tominski","full_name":"Tominski, Johannes"},{"last_name":"Lammers","first_name":"Stefan","full_name":"Lammers, Stefan","id":"13835"},{"full_name":"Wulf, Christian","first_name":"Christian","last_name":"Wulf"},{"id":"604","full_name":"Zimmer, Detmar","last_name":"Zimmer","first_name":"Detmar"}],"year":"2018","title":"Method for a Software-based Design Check of Additively Manufactured Components","status":"public","intvolume":"        29","date_updated":"2022-01-06T06:55:33Z","date_created":"2021-06-15T11:10:06Z","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"conference","citation":{"bibtex":"@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based Design Check of Additively Manufactured Components}, volume={29}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>}, booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski, Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018} }","ama":"Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design Check of Additively Manufactured Components. In: <i>29th Annual International Solid Freeform Fabrication Symposium</i>. Vol 29. ; 2018. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>","mla":"Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively Manufactured Components.” <i>29th Annual International Solid Freeform Fabrication Symposium</i>, vol. 29, 2018, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.","chicago":"Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer. “Method for a Software-Based Design Check of Additively Manufactured Components.” In <i>29th Annual International Solid Freeform Fabrication Symposium</i>, Vol. 29, 2018. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.","short":"J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018.","ieee":"J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in <i>29th Annual International Solid Freeform Fabrication Symposium</i>, 2018, vol. 29.","apa":"Tominski, J., Lammers, S., Wulf, C., &#38; Zimmer, D. (2018). Method for a Software-based Design Check of Additively Manufactured Components. In <i>29th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 29). <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>"},"publication":"29th Annual International Solid Freeform Fabrication Symposium","abstract":[{"lang":"eng","text":"This paper reports on the experimental development and the theoretical analysis of the scanning laser epitaxy (SLE) process that is currently being investigated and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing process for deposition of equiaxed, directionally solidified and single-crystal nickel superalloys onto superalloy substrates through the selective melting and re-solidification of superalloy powders. The thermal modeling of the system, done in a commercial CFD software package, simulates a heat source moving over a powder bed and considers the approximate change in the property values for consolidating CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the melting temperature criteria and the resulting plots are presented alongside matching experimental micrographs obtained through cross-sectional metallography. The influence of the processing parameters on the microstructural evolution, as evidenced through observations made from the micrographs, is discussed. This work is sponsored by the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526."}]},{"page":"128-143","_id":"22435","language":[{"iso":"eng"}],"publisher":"Carl Hanser Verlag GmbH & Co. KG","user_id":"38077","doi":"10.3139/9783446458123.008","status":"public","title":"Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren","year":"2018","author":[{"full_name":"Künneke, Thomas","last_name":"Künneke","first_name":"Thomas","id":"13226"},{"last_name":"Bücker","first_name":"Sonja","full_name":"Bücker, Sonja"},{"full_name":"Lieneke, Tobias","last_name":"Lieneke","first_name":"Tobias","id":"13956"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"publication_identifier":{"isbn":["978-3-446-45812-3"]},"date_updated":"2022-01-06T06:55:33Z","date_created":"2021-06-15T11:10:08Z","type":"conference","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"publication":"Proceedings of the 15th Rapid.Tech Conference","citation":{"ieee":"T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in <i>Proceedings of the 15th Rapid.Tech Conference</i>, 2018, pp. 128–143.","apa":"Künneke, T., Bücker, S., Lieneke, T., &#38; Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In <i>Proceedings of the 15th Rapid.Tech Conference</i> (pp. 128–143). Carl Hanser Verlag GmbH &#38; Co. KG. <a href=\"https://doi.org/10.3139/9783446458123.008\">https://doi.org/10.3139/9783446458123.008</a>","short":"T. Künneke, S. Bücker, T. Lieneke, D. Zimmer, in: Proceedings of the 15th Rapid.Tech Conference, Carl Hanser Verlag GmbH &#38; Co. KG, 2018, pp. 128–143.","chicago":"Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” In <i>Proceedings of the 15th Rapid.Tech Conference</i>, 128–43. Carl Hanser Verlag GmbH &#38; Co. KG, 2018. <a href=\"https://doi.org/10.3139/9783446458123.008\">https://doi.org/10.3139/9783446458123.008</a>.","mla":"Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” <i>Proceedings of the 15th Rapid.Tech Conference</i>, Carl Hanser Verlag GmbH &#38; Co. KG, 2018, pp. 128–43, doi:<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>.","bibtex":"@inproceedings{Künneke_Bücker_Lieneke_Zimmer_2018, title={Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren}, DOI={<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>}, booktitle={Proceedings of the 15th Rapid.Tech Conference}, publisher={Carl Hanser Verlag GmbH &#38; Co. KG}, author={Künneke, Thomas and Bücker, Sonja and Lieneke, Tobias and Zimmer, Detmar}, year={2018}, pages={128–143} }","ama":"Künneke T, Bücker S, Lieneke T, Zimmer D. Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In: <i>Proceedings of the 15th Rapid.Tech Conference</i>. Carl Hanser Verlag GmbH &#38; Co. KG; 2018:128-143. doi:<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>"},"abstract":[{"text":"In der Industrie entsteht aufgrund des dynamischen Wettbewerbsumfelds ein zunehmender Drang nach verkürzten Produktentstehungszeiten, hoher Funktionsintegration und individualisierten Produkten. Mithin erlangen additive Fertigungsverfahren eine zunehmende industrielle Bedeutung. Das Laser-Strahlschmelzen (LBM) als additives Verfahren ist hierbei beispielhaft hervorzuheben, da es bereits im Bereich des Prototypenbaus und der Kleinserienfertigung ein etabliertes Verfahren ist, das an der Schwelle zum Einsatz in der Serienproduktion steht. Entscheidendes Hemmnis für den Einsatz der additiven Fertigungsverfahren bildet die fehlende methodische Ausnutzung der gestalterischen Freiheiten und Randbedingungen durch die vergleichsweise neuartige Gruppe an Fertigungsverfahren im gesamten Produktentstehungsprozess. In der Produktentwicklung bildet die Konstruktionsmethodik einen möglichen Ansatz, um gestalterische Freiheiten und Vorteile additiver Fertigungsverfahren bereits in frühen Phasen der Entwicklung gezielt zu berücksichtigen. Hierfür werden aufgrund bestehender und allgemein anerkannter Konstruktionsmethoden (z.B. VDI2221, Pahl/Beitz, etc.) Anknüpfungspunkte aufgezeigt, die eine Implementierung, speziell des Laser-Strahlschmelzens, ermöglichen. Besonderes Augenmerk wird in dieser Veröffentlichung auf die beiden Konstruktionsphasen Konzeption und Gestaltung gelegt. Hierzu werden Ergänzungen oder Anpassungen der bestehenden Konstruktionsmethoden vorgestellt. In besonderer Weise wird dabei auf die Einbringung und die Vorteile der additiven Fertigungsverfahren eingegangen.","lang":"eng"}]},{"citation":{"chicago":"Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i> 113, no. 11 (2018): 742–45. <a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>.","short":"A. Jacob, T. Künneke, T. Lieneke, T. Baumann, N. Stricker, D. Zimmer, G. Lanza, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113 (2018) 742–745.","ieee":"A. Jacob <i>et al.</i>, “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” <i>ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>, vol. 113, no. 11, pp. 742–745, 2018.","apa":"Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., &#38; Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i>, <i>113</i>(11), 742–745. <a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>","bibtex":"@article{Jacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title={Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung}, volume={113}, DOI={<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>}, number={11}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Carl Hanser Verlag}, author={Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela}, year={2018}, pages={742–745} }","ama":"Jacob A, Künneke T, Lieneke T, et al. Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. <i>ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>. 2018;113(11):742-745. doi:<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>","mla":"Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i>, vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>."},"publication":"ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb","issue":"11","abstract":[{"lang":"eng","text":"Die Additive Fertigung eröffnet neue Freiheitsgrade in der Produktentwicklung. Unsicherheiten über die Wirtschaftlichkeit und Leistungsfähigkeit der aus der Konstruktion ableitbaren Fertigungstechnologieketten sind zu beachten. In diesem Beitrag wird eine Methode vorgestellt, welche die Anpassung einer bestehenden Konstruktionsmethode berücksichtigt und eine iterative Bewertung der Konstruktionsentscheidungen anhand von Technologieketten ermöglicht. Hiermit können die Potenziale der additiven Fertigungstechnologien zielgerichtet realisiert werden."}],"date_created":"2021-06-15T11:10:09Z","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"journal_article","author":[{"last_name":"Jacob","first_name":"Alexander","full_name":"Jacob, Alexander"},{"first_name":"Thomas","last_name":"Künneke","full_name":"Künneke, Thomas","id":"13226"},{"full_name":"Lieneke, Tobias","last_name":"Lieneke","first_name":"Tobias","id":"13956"},{"first_name":"Tobias","last_name":"Baumann","full_name":"Baumann, Tobias"},{"full_name":"Stricker, Nicole","first_name":"Nicole","last_name":"Stricker"},{"id":"604","last_name":"Zimmer","first_name":"Detmar","full_name":"Zimmer, Detmar"},{"last_name":"Lanza","first_name":"Gisela","full_name":"Lanza, Gisela"}],"year":"2018","title":"Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung","status":"public","intvolume":"       113","date_updated":"2022-01-06T06:55:33Z","_id":"22436","language":[{"iso":"eng"}],"publisher":"Carl Hanser Verlag","page":"742-745","volume":113,"doi":"https://doi.org/10.3139/104.112005","user_id":"38077"},{"citation":{"ama":"Brückner U, Künneke T, Schadomsky MH, Strop M, Zimmer D. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag; 2018:247-290. doi:<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>","bibtex":"@book{Brückner_Künneke_Schadomsky_Strop_Zimmer_2018, title={Elektromechanische Antriebe}, DOI={<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>}, publisher={Carl Hanser Verlag}, author={Brückner, Uwe and Künneke, Thomas and Schadomsky, Magnus Hubert and Strop, Malte and Zimmer, Detmar}, year={2018}, pages={247–290} }","mla":"Brückner, Uwe, et al. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018, pp. 247–90, doi:<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>.","chicago":"Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and Detmar Zimmer. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018. <a href=\"https://doi.org/10.3139/9783446456198.009\">https://doi.org/10.3139/9783446456198.009</a>.","short":"U. Brückner, T. Künneke, M.H. Schadomsky, M. Strop, D. Zimmer, Elektromechanische Antriebe, Carl Hanser Verlag, 2018.","apa":"Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., &#38; Zimmer, D. (2018). <i>Elektromechanische Antriebe</i> (pp. 247–290). Carl Hanser Verlag. <a href=\"https://doi.org/10.3139/9783446456198.009\">https://doi.org/10.3139/9783446456198.009</a>","ieee":"U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018, pp. 247–290."},"department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"book","date_created":"2021-06-22T13:31:43Z","date_updated":"2022-01-06T06:55:35Z","author":[{"first_name":"Uwe","last_name":"Brückner","full_name":"Brückner, Uwe"},{"last_name":"Künneke","first_name":"Thomas","full_name":"Künneke, Thomas","id":"13226"},{"first_name":"Magnus Hubert","last_name":"Schadomsky","full_name":"Schadomsky, Magnus Hubert","id":"11904"},{"last_name":"Strop","first_name":"Malte","full_name":"Strop, Malte"},{"full_name":"Zimmer, Detmar","first_name":"Detmar","last_name":"Zimmer","id":"604"}],"publication_identifier":{"isbn":["978-3-446-45619-8"]},"status":"public","year":"2018","title":"Elektromechanische Antriebe","doi":"10.3139/9783446456198.009","user_id":"38077","publisher":"Carl Hanser Verlag","_id":"22506","language":[{"iso":"eng"}],"page":"247-290"},{"date_updated":"2022-01-06T06:55:44Z","author":[{"full_name":"Drüke, Simon","first_name":"Simon","last_name":"Drüke"},{"full_name":"Bicker, Rainer","last_name":"Bicker","first_name":"Rainer"},{"full_name":"Schullter, Bernd","last_name":"Schullter","first_name":"Bernd"},{"full_name":"Henke, Christian","last_name":"Henke","first_name":"Christian"},{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552"}],"status":"public","title":"Rotordynamic instabilities in washing machines","year":"2018","user_id":"24876","publisher":"Springer Nature Switzerland AG","_id":"22987","language":[{"iso":"eng"}],"page":"383-397","citation":{"ama":"Drüke S, Bicker R, Schullter B, Henke C, Trächtler A. Rotordynamic instabilities in washing machines. In: <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>. Springer Nature Switzerland AG; 2018:383-397.","short":"S. Drüke, R. Bicker, B. Schullter, C. Henke, A. Trächtler, in: Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM, Springer Nature Switzerland AG, 2018, pp. 383–397.","chicago":"Drüke, Simon, Rainer Bicker, Bernd Schullter, Christian Henke, and Ansgar Trächtler. “Rotordynamic Instabilities in Washing Machines.” In <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>, 383–97. Springer Nature Switzerland AG, 2018.","bibtex":"@inproceedings{Drüke_Bicker_Schullter_Henke_Trächtler_2018, title={Rotordynamic instabilities in washing machines}, booktitle={Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM}, publisher={Springer Nature Switzerland AG}, author={Drüke, Simon and Bicker, Rainer and Schullter, Bernd and Henke, Christian and Trächtler, Ansgar}, year={2018}, pages={383–397} }","mla":"Drüke, Simon, et al. “Rotordynamic Instabilities in Washing Machines.” <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>, Springer Nature Switzerland AG, 2018, pp. 383–97.","apa":"Drüke, S., Bicker, R., Schullter, B., Henke, C., &#38; Trächtler, A. (2018). Rotordynamic instabilities in washing machines. In <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i> (pp. 383–397). Springer Nature Switzerland AG.","ieee":"S. Drüke, R. Bicker, B. Schullter, C. Henke, and A. Trächtler, “Rotordynamic instabilities in washing machines,” in <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>, 2018, pp. 383–397."},"publication":"Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM","department":[{"_id":"153"},{"_id":"241"}],"type":"conference","date_created":"2021-08-09T05:39:54Z"},{"citation":{"chicago":"Gräler, Manuel, Robert Springer, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Assisted Setup of Forming Processes: Compensation of Initial Stochastic Disturbances.” <i>Swedish Production Symposium</i> 25 (2018): 358–64.","short":"M. Gräler, R. Springer, C. Henke, A. Trächtler, W. Homberg, Swedish Production Symposium 25 (2018) 358–364.","ama":"Gräler M, Springer R, Henke C, Trächtler A, Homberg W. Assisted setup of forming processes: compensation of initial stochastic disturbances. <i>Swedish Production Symposium</i>. 2018;25:358-364.","bibtex":"@article{Gräler_Springer_Henke_Trächtler_Homberg_2018, title={Assisted setup of forming processes: compensation of initial stochastic disturbances}, volume={25}, journal={Swedish Production Symposium}, author={Gräler, Manuel and Springer, Robert and Henke, Christian and Trächtler, Ansgar and Homberg, Werner}, year={2018}, pages={358–364} }","apa":"Gräler, M., Springer, R., Henke, C., Trächtler, A., &#38; Homberg, W. (2018). Assisted setup of forming processes: compensation of initial stochastic disturbances. <i>Swedish Production Symposium</i>, <i>25</i>, 358–364.","mla":"Gräler, Manuel, et al. “Assisted Setup of Forming Processes: Compensation of Initial Stochastic Disturbances.” <i>Swedish Production Symposium</i>, vol. 25, 2018, pp. 358–64.","ieee":"M. Gräler, R. Springer, C. Henke, A. Trächtler, and W. Homberg, “Assisted setup of forming processes: compensation of initial stochastic disturbances,” <i>Swedish Production Symposium</i>, vol. 25, pp. 358–364, 2018."},"publication":"Swedish Production Symposium","date_created":"2021-08-09T05:39:55Z","department":[{"_id":"153"},{"_id":"241"}],"type":"journal_article","author":[{"full_name":"Gräler, Manuel","last_name":"Gräler","first_name":"Manuel"},{"full_name":"Springer, Robert","last_name":"Springer","first_name":"Robert"},{"full_name":"Henke, Christian","first_name":"Christian","last_name":"Henke"},{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552"},{"full_name":"Homberg, Werner","first_name":"Werner","last_name":"Homberg"}],"title":"Assisted setup of forming processes: compensation of initial stochastic disturbances","status":"public","year":"2018","intvolume":"        25","date_updated":"2022-01-06T06:55:44Z","language":[{"iso":"eng"}],"_id":"22988","page":"358-364","volume":25,"user_id":"24876"},{"type":"conference","department":[{"_id":"153"},{"_id":"241"}],"date_created":"2021-08-09T05:39:57Z","publication":"EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen","citation":{"ieee":"A. T. Rüting, C. Henke, and A. Trächtler, “Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung,” in <i>EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen</i>, 2018.","mla":"Rüting, Arne Thorsten, et al. “Umsetzung Einer Echtzeitfähigen Mehrgrößenoptimierung Auf Einer Industriesteuerung.” <i>EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen</i>, IFAK - Institut für Automation und Kommunikation e.V., 2018.","apa":"Rüting, A. T., Henke, C., &#38; Trächtler, A. (2018). Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung. In <i>EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen</i>. IFAK - Institut für Automation und Kommunikation e.V.","bibtex":"@inproceedings{Rüting_Henke_Trächtler_2018, title={Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung}, booktitle={EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen}, publisher={IFAK - Institut für Automation und Kommunikation e.V.}, author={Rüting, Arne Thorsten and Henke, Christian and Trächtler, Ansgar}, year={2018} }","short":"A.T. Rüting, C. Henke, A. Trächtler, in: EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen, IFAK - Institut für Automation und Kommunikation e.V., 2018.","ama":"Rüting AT, Henke C, Trächtler A. Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung. In: <i>EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen</i>. IFAK - Institut für Automation und Kommunikation e.V.; 2018.","chicago":"Rüting, Arne Thorsten, Christian Henke, and Ansgar Trächtler. “Umsetzung Einer Echtzeitfähigen Mehrgrößenoptimierung Auf Einer Industriesteuerung.” In <i>EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen</i>. IFAK - Institut für Automation und Kommunikation e.V., 2018."},"user_id":"24876","_id":"22989","publisher":"IFAK - Institut für Automation und Kommunikation e.V.","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:55:44Z","status":"public","title":"Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung","year":"2018","author":[{"full_name":"Rüting, Arne Thorsten","last_name":"Rüting","first_name":"Arne Thorsten"},{"last_name":"Henke","first_name":"Christian","full_name":"Henke, Christian"},{"id":"552","first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar"}]},{"publication":"AIP Conference Proceedings","issue":"2018","citation":{"mla":"Springer, Robert, et al. “Model Based Setup Assistant for Progressive Tools.” <i>AIP Conference Proceedings</i>, vol. 160025, no. 2018, 2018.","ama":"Springer R, Graeler M, Homberg W, Henke C, Trächtler A. Model based Setup Assistant for Progressive Tools. <i>AIP Conference Proceedings</i>. 2018;160025(2018).","bibtex":"@article{Springer_Graeler_Homberg_Henke_Trächtler_2018, title={Model based Setup Assistant for Progressive Tools}, volume={160025}, number={2018}, journal={AIP Conference Proceedings}, author={Springer, Robert and Graeler, Manuel and Homberg, Werner and Henke, Christian and Trächtler, Ansgar}, year={2018} }","apa":"Springer, R., Graeler, M., Homberg, W., Henke, C., &#38; Trächtler, A. (2018). Model based Setup Assistant for Progressive Tools. <i>AIP Conference Proceedings</i>, <i>160025</i>(2018).","ieee":"R. Springer, M. Graeler, W. Homberg, C. Henke, and A. Trächtler, “Model based Setup Assistant for Progressive Tools,” <i>AIP Conference Proceedings</i>, vol. 160025, no. 2018, 2018.","short":"R. Springer, M. Graeler, W. Homberg, C. Henke, A. Trächtler, AIP Conference Proceedings 160025 (2018).","chicago":"Springer, Robert, Manuel Graeler, Werner Homberg, Christian Henke, and Ansgar Trächtler. “Model Based Setup Assistant for Progressive Tools.” <i>AIP Conference Proceedings</i> 160025, no. 2018 (2018)."},"type":"journal_article","department":[{"_id":"153"},{"_id":"241"}],"date_created":"2021-08-09T05:39:58Z","date_updated":"2022-01-06T06:55:44Z","intvolume":"    160025","title":"Model based Setup Assistant for Progressive Tools","status":"public","year":"2018","author":[{"last_name":"Springer","first_name":"Robert","full_name":"Springer, Robert"},{"first_name":"Manuel","last_name":"Graeler","full_name":"Graeler, Manuel"},{"full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"},{"full_name":"Henke, Christian","last_name":"Henke","first_name":"Christian"},{"id":"552","first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar"}],"user_id":"24876","volume":160025,"_id":"22990","language":[{"iso":"eng"}]},{"year":"2018","title":"Recent Developments in Hardware-in-the-Loop Testing","status":"public","author":[{"full_name":"Millitzer, Jonathan","first_name":"Jonathan","last_name":"Millitzer"},{"full_name":"Mayer, Dirk","last_name":"Mayer","first_name":"Dirk"},{"full_name":"Jersch, Torben","first_name":"Torben","last_name":"Jersch"},{"full_name":"Henke, Christian","first_name":"Christian","last_name":"Henke"},{"full_name":"Michael, Jan","last_name":"Michael","first_name":"Jan"},{"full_name":"Tamm, Christoph","last_name":"Tamm","first_name":"Christoph"},{"full_name":"Ranisch, Christopher","first_name":"Christopher","last_name":"Ranisch"}],"date_updated":"2022-01-06T06:55:44Z","_id":"22991","publisher":"Society for Experimental Mechanics, Inc.","language":[{"iso":"eng"}],"user_id":"24876","volume":"XXXVI","publication":"IMAC-XXXVI Conference and Exposition on Structural Dynamics","citation":{"ieee":"J. Millitzer <i>et al.</i>, “Recent Developments in Hardware-in-the-Loop Testing,” in <i>IMAC-XXXVI Conference and Exposition on Structural Dynamics</i>, 2018, vol. XXXVI.","mla":"Millitzer, Jonathan, et al. “Recent Developments in Hardware-in-the-Loop Testing.” <i>IMAC-XXXVI Conference and Exposition on Structural Dynamics</i>, vol. XXXVI, Society for Experimental Mechanics, Inc., 2018.","apa":"Millitzer, J., Mayer, D., Jersch, T., Henke, C., Michael, J., Tamm, C., &#38; Ranisch, C. (2018). Recent Developments in Hardware-in-the-Loop Testing. In <i>IMAC-XXXVI Conference and Exposition on Structural Dynamics</i> (Vol. XXXVI). Society for Experimental Mechanics, Inc.","bibtex":"@inproceedings{Millitzer_Mayer_Jersch_Henke_Michael_Tamm_Ranisch_2018, title={Recent Developments in Hardware-in-the-Loop Testing}, volume={XXXVI}, booktitle={IMAC-XXXVI Conference and Exposition on Structural Dynamics}, publisher={Society for Experimental Mechanics, Inc.}, author={Millitzer, Jonathan and Mayer, Dirk and Jersch, Torben and Henke, Christian and Michael, Jan and Tamm, Christoph and Ranisch, Christopher}, year={2018} }","short":"J. Millitzer, D. Mayer, T. Jersch, C. Henke, J. Michael, C. Tamm, C. Ranisch, in: IMAC-XXXVI Conference and Exposition on Structural Dynamics, Society for Experimental Mechanics, Inc., 2018.","ama":"Millitzer J, Mayer D, Jersch T, et al. Recent Developments in Hardware-in-the-Loop Testing. In: <i>IMAC-XXXVI Conference and Exposition on Structural Dynamics</i>. Vol XXXVI. Society for Experimental Mechanics, Inc.; 2018.","chicago":"Millitzer, Jonathan, Dirk Mayer, Torben Jersch, Christian Henke, Jan Michael, Christoph Tamm, and Christopher Ranisch. “Recent Developments in Hardware-in-the-Loop Testing.” In <i>IMAC-XXXVI Conference and Exposition on Structural Dynamics</i>, Vol. XXXVI. Society for Experimental Mechanics, Inc., 2018."},"date_created":"2021-08-09T05:40:20Z","type":"conference","department":[{"_id":"241"}]},{"user_id":"24876","_id":"22994","language":[{"iso":"eng"}],"publisher":"IEEE","page":"4-7","date_updated":"2022-01-06T06:55:44Z","author":[{"first_name":"Christopher","last_name":"Lankeit","full_name":"Lankeit, Christopher"},{"full_name":"Michael, Jan","last_name":"Michael","first_name":"Jan"},{"full_name":"Henke, Christian","first_name":"Christian","last_name":"Henke"},{"full_name":"Trächtler, Ansgar","first_name":"Ansgar","last_name":"Trächtler","id":"552"}],"status":"public","title":"Holistic Requirements for Interdisciplinary Development Processes","year":"2018","department":[{"_id":"153"},{"_id":"241"}],"type":"conference","date_created":"2021-08-09T05:40:24Z","citation":{"short":"C. Lankeit, J. Michael, C. Henke, A. Trächtler, in: Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering, IEEE, 2018, pp. 4–7.","chicago":"Lankeit, Christopher, Jan Michael, Christian Henke, and Ansgar Trächtler. “Holistic Requirements for Interdisciplinary Development Processes.” In <i>Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering</i>, 4–7. IEEE, 2018.","apa":"Lankeit, C., Michael, J., Henke, C., &#38; Trächtler, A. (2018). Holistic Requirements for Interdisciplinary Development Processes. In <i>Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering</i> (pp. 4–7). IEEE.","ieee":"C. Lankeit, J. Michael, C. Henke, and A. Trächtler, “Holistic Requirements for Interdisciplinary Development Processes,” in <i>Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering</i>, 2018, pp. 4–7.","ama":"Lankeit C, Michael J, Henke C, Trächtler A. Holistic Requirements for Interdisciplinary Development Processes. In: <i>Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering</i>. IEEE; 2018:4-7.","bibtex":"@inproceedings{Lankeit_Michael_Henke_Trächtler_2018, title={Holistic Requirements for Interdisciplinary Development Processes}, booktitle={Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering}, publisher={IEEE}, author={Lankeit, Christopher and Michael, Jan and Henke, Christian and Trächtler, Ansgar}, year={2018}, pages={4–7} }","mla":"Lankeit, Christopher, et al. “Holistic Requirements for Interdisciplinary Development Processes.” <i>Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering</i>, IEEE, 2018, pp. 4–7."},"publication":"Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering"},{"citation":{"bibtex":"@article{Pai_Riepold_Trächtler_2018, title={Model-based precision position and force control of SMA actuators with a clamping application}, volume={50}, journal={Mechatronics}, author={Pai, Arathi and Riepold, Markus and Trächtler, Ansgar}, year={2018}, pages={303–320} }","ama":"Pai A, Riepold M, Trächtler A. Model-based precision position and force control of SMA actuators with a clamping application. <i>Mechatronics</i>. 2018;50:303-320.","mla":"Pai, Arathi, et al. “Model-Based Precision Position and Force Control of SMA Actuators with a Clamping Application.” <i>Mechatronics</i>, vol. 50, 2018, pp. 303–20.","chicago":"Pai, Arathi, Markus Riepold, and Ansgar Trächtler. “Model-Based Precision Position and Force Control of SMA Actuators with a Clamping Application.” <i>Mechatronics</i> 50 (2018): 303–20.","short":"A. Pai, M. Riepold, A. Trächtler, Mechatronics 50 (2018) 303–320.","ieee":"A. Pai, M. Riepold, and A. Trächtler, “Model-based precision position and force control of SMA actuators with a clamping application,” <i>Mechatronics</i>, vol. 50, pp. 303–320, 2018.","apa":"Pai, A., Riepold, M., &#38; Trächtler, A. (2018). Model-based precision position and force control of SMA actuators with a clamping application. <i>Mechatronics</i>, <i>50</i>, 303–320."},"publication":"Mechatronics","department":[{"_id":"153"},{"_id":"241"}],"type":"journal_article","date_created":"2021-08-09T05:41:37Z","intvolume":"        50","date_updated":"2022-01-06T06:55:44Z","author":[{"full_name":"Pai, Arathi","last_name":"Pai","first_name":"Arathi"},{"full_name":"Riepold, Markus","last_name":"Riepold","first_name":"Markus"},{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552"}],"year":"2018","title":"Model-based precision position and force control of SMA actuators with a clamping application","status":"public","volume":50,"user_id":"24876","language":[{"iso":"eng"}],"_id":"22995","page":"303-320"},{"publication":"Procedia Manufacturing","citation":{"chicago":"Holtkötter, Jens, Jan Michael, Christian Henke, Ansgar Trächtler, Marcos Bockholt, Andreas Möhlenkamp, and Michael Katter. “Rapid-Control-Prototyping as Part of Model-Based Development of Heat Pump Dryers.” <i>Procedia Manufacturing</i> 24 (2018): 235–242.","short":"J. Holtkötter, J. Michael, C. Henke, A. Trächtler, M. Bockholt, A. Möhlenkamp, M. Katter, Procedia Manufacturing 24 (2018) 235–242.","apa":"Holtkötter, J., Michael, J., Henke, C., Trächtler, A., Bockholt, M., Möhlenkamp, A., &#38; Katter, M. (2018). Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers. <i>Procedia Manufacturing</i>, <i>24</i>, 235–242.","ieee":"J. Holtkötter <i>et al.</i>, “Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers,” <i>Procedia Manufacturing</i>, vol. 24, pp. 235–242, 2018.","ama":"Holtkötter J, Michael J, Henke C, et al. Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers. <i>Procedia Manufacturing</i>. 2018;24:235–242.","bibtex":"@article{Holtkötter_Michael_Henke_Trächtler_Bockholt_Möhlenkamp_Katter_2018, title={Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers}, volume={24}, journal={Procedia Manufacturing}, author={Holtkötter, Jens and Michael, Jan and Henke, Christian and Trächtler, Ansgar and Bockholt, Marcos and Möhlenkamp, Andreas and Katter, Michael}, year={2018}, pages={235–242} }","mla":"Holtkötter, Jens, et al. “Rapid-Control-Prototyping as Part of Model-Based Development of Heat Pump Dryers.” <i>Procedia Manufacturing</i>, vol. 24, 2018, pp. 235–242."},"date_created":"2021-08-09T05:41:40Z","type":"journal_article","department":[{"_id":"153"},{"_id":"241"}],"status":"public","title":"Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers","year":"2018","author":[{"full_name":"Holtkötter, Jens","first_name":"Jens","last_name":"Holtkötter"},{"first_name":"Jan","last_name":"Michael","full_name":"Michael, Jan"},{"full_name":"Henke, Christian","last_name":"Henke","first_name":"Christian"},{"full_name":"Trächtler, Ansgar","first_name":"Ansgar","last_name":"Trächtler","id":"552"},{"last_name":"Bockholt","first_name":"Marcos","full_name":"Bockholt, Marcos"},{"full_name":"Möhlenkamp, Andreas","first_name":"Andreas","last_name":"Möhlenkamp"},{"full_name":"Katter, Michael","first_name":"Michael","last_name":"Katter"}],"date_updated":"2022-01-06T06:55:44Z","intvolume":"        24","page":"235–242","_id":"22998","language":[{"iso":"eng"}],"user_id":"24876","volume":24},{"author":[{"full_name":"Büsching, J.","last_name":"Büsching","first_name":"J."},{"last_name":"Lindemann","first_name":"C.","full_name":"Lindemann, C."},{"first_name":"U.","last_name":"Jahnke","full_name":"Jahnke, U."},{"first_name":"A.","last_name":"Kruse","full_name":"Kruse, A."},{"first_name":"R.","last_name":"Koch","full_name":"Koch, R."}],"status":"public","title":"Technology Integration into Existing Companies","year":"2018","intvolume":"        29","date_updated":"2022-01-06T06:55:10Z","language":[{"iso":"eng"}],"_id":"21696","page":"14-31","volume":29,"user_id":"55833","doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf","citation":{"mla":"Büsching, J., et al. “Technology Integration into Existing Companies.” <i>29th Annual International Solid Freeform Fabrication Symposium</i>, vol. 29, 2018, pp. 14–31, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf</a>.","bibtex":"@inproceedings{Büsching_Lindemann_Jahnke_Kruse_Koch_2018, title={Technology Integration into Existing Companies}, volume={29}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf</a>}, booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Büsching, J. and Lindemann, C. and Jahnke, U. and Kruse, A. and Koch, R.}, year={2018}, pages={14–31} }","ama":"Büsching J, Lindemann C, Jahnke U, Kruse A, Koch R. Technology Integration into Existing Companies. In: <i>29th Annual International Solid Freeform Fabrication Symposium</i>. Vol 29. ; 2018:14-31. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf</a>","ieee":"J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, and R. Koch, “Technology Integration into Existing Companies,” in <i>29th Annual International Solid Freeform Fabrication Symposium</i>, 2018, vol. 29, pp. 14–31.","apa":"Büsching, J., Lindemann, C., Jahnke, U., Kruse, A., &#38; Koch, R. (2018). Technology Integration into Existing Companies. In <i>29th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 29, pp. 14–31). <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf</a>","chicago":"Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology Integration into Existing Companies.” In <i>29th Annual International Solid Freeform Fabrication Symposium</i>, 29:14–31, 2018. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf</a>.","short":"J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, R. Koch, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018, pp. 14–31."},"publication":"29th Annual International Solid Freeform Fabrication Symposium","abstract":[{"text":"Theimplementation of additive manufacturing as an industrial manufacturing process poses extraordinary challenges to companies due to their far-reaching differences to conventional processes. In addition to the major differences in the production process, the pre and post process steps in particular also require a rethinking for companies and their employees. To overcome these challenges and specifically to assist SMEs in the integration of technologies five industrial companies are researching together within research project \"OptiAMix\", funded by the German Federal Ministry of Education and Research (BMBF) and coordinated by the Paderborn University. This paper focuses on the development of an optimal and standardized process chain and its implementation in a general integration methodology. This enables the standardized integration of additivemanufacturing in order to create a uniform understanding of the procedures and tasks within the company for the industrial application of additive manufacturing at an early stage as well as the full exploitation of its high potentials. Therefore, the methodology also includes other technology-specific components such as strategic component selection, decision support for \"make or buy\" and the implementation of automated component marking.","lang":"eng"}],"date_created":"2021-04-21T07:38:06Z","department":[{"_id":"144"},{"_id":"219"},{"_id":"624"}],"type":"conference"},{"doi":"10.21278/idc.2018.0298","user_id":"9138","_id":"21991","date_updated":"2022-01-06T06:55:22Z","publication_status":"published","title":"SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS","year":"2018","status":"public","publication_identifier":{"isbn":["9789537738594"]},"author":[{"full_name":"Graessler, Iris","last_name":"Graessler","first_name":"Iris"},{"full_name":"Scholle, Philipp","first_name":"Philipp","last_name":"Scholle"},{"first_name":"Julian","last_name":"Hentze","full_name":"Hentze, Julian"},{"full_name":"Oleff, Christian","first_name":"Christian","last_name":"Oleff"}],"type":"conference","department":[{"_id":"26"},{"_id":"624"},{"_id":"219"}],"date_created":"2021-05-05T09:15:36Z","publication":"Proceedings of the DESIGN 2018 15th International Design Conference","citation":{"mla":"Graessler, Iris, et al. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.” <i>Proceedings of the DESIGN 2018 15th International Design Conference</i>, 2018, doi:<a href=\"https://doi.org/10.21278/idc.2018.0298\">10.21278/idc.2018.0298</a>.","bibtex":"@inproceedings{Graessler_Scholle_Hentze_Oleff_2018, title={SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS}, DOI={<a href=\"https://doi.org/10.21278/idc.2018.0298\">10.21278/idc.2018.0298</a>}, booktitle={Proceedings of the DESIGN 2018 15th International Design Conference}, author={Graessler, Iris and Scholle, Philipp and Hentze, Julian and Oleff, Christian}, year={2018} }","ama":"Graessler I, Scholle P, Hentze J, Oleff C. SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS. In: <i>Proceedings of the DESIGN 2018 15th International Design Conference</i>. ; 2018. doi:<a href=\"https://doi.org/10.21278/idc.2018.0298\">10.21278/idc.2018.0298</a>","ieee":"I. Graessler, P. Scholle, J. Hentze, and C. Oleff, “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS,” in <i>Proceedings of the DESIGN 2018 15th International Design Conference</i>, 2018.","apa":"Graessler, I., Scholle, P., Hentze, J., &#38; Oleff, C. (2018). SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS. In <i>Proceedings of the DESIGN 2018 15th International Design Conference</i>. <a href=\"https://doi.org/10.21278/idc.2018.0298\">https://doi.org/10.21278/idc.2018.0298</a>","short":"I. Graessler, P. Scholle, J. Hentze, C. Oleff, in: Proceedings of the DESIGN 2018 15th International Design Conference, 2018.","chicago":"Graessler, Iris, Philipp Scholle, Julian Hentze, and Christian Oleff. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.” In <i>Proceedings of the DESIGN 2018 15th International Design Conference</i>, 2018. <a href=\"https://doi.org/10.21278/idc.2018.0298\">https://doi.org/10.21278/idc.2018.0298</a>."}},{"date_updated":"2022-01-06T06:55:22Z","intvolume":"        15","year":"2018","title":"Semi-Automatized Assessment of Requirement Interrelations","status":"public","author":[{"first_name":"I.","last_name":"Gräßler","full_name":"Gräßler, I."},{"first_name":"P.","last_name":"Scholle","full_name":"Scholle, P."},{"full_name":"Hentze, J.","last_name":"Hentze","first_name":"J."},{"full_name":"Oleff, C.","last_name":"Oleff","first_name":"C."}],"user_id":"9138","doi":"10.21278/idc.2018.0298","volume":15,"page":"S. 325-334","_id":"21998","abstract":[{"lang":"eng","text":"Changing requirements have a broad impact on product development processes. In this paper, a novel approach towards structuring requirements is proposed. Based on a requirements list, interrelations of requirements are assessed semi-automatically by a rule basis. Here, generic interrelations funded on either physical fundamentals or working principles are recorded. By this approach, requirements structure matrices are derived semi-automatically. Combined with selecting critical requirements based on structured criterions, iterations due to changing requirements will be reduced."}],"publication":"15th International Design Conference","citation":{"ieee":"I. Gräßler, P. Scholle, J. Hentze, and C. Oleff, “Semi-Automatized Assessment of Requirement Interrelations,” in <i>15th International Design Conference</i>, 2018, vol. 15, p. S. 325-334.","apa":"Gräßler, I., Scholle, P., Hentze, J., &#38; Oleff, C. (2018). Semi-Automatized Assessment of Requirement Interrelations. In <i>15th International Design Conference</i> (Vol. 15, p. S. 325-334). <a href=\"https://doi.org/10.21278/idc.2018.0298\">https://doi.org/10.21278/idc.2018.0298</a>","mla":"Gräßler, I., et al. “Semi-Automatized Assessment of Requirement Interrelations.” <i>15th International Design Conference</i>, vol. 15, 2018, p. S. 325-334, doi:<a href=\"https://doi.org/10.21278/idc.2018.0298\">10.21278/idc.2018.0298</a>.","bibtex":"@inproceedings{Gräßler_Scholle_Hentze_Oleff_2018, title={Semi-Automatized Assessment of Requirement Interrelations}, volume={15}, DOI={<a href=\"https://doi.org/10.21278/idc.2018.0298\">10.21278/idc.2018.0298</a>}, booktitle={15th International Design Conference}, author={Gräßler, I. and Scholle, P. and Hentze, J. and Oleff, C.}, year={2018}, pages={S. 325-334} }","chicago":"Gräßler, I., P. Scholle, J. Hentze, and C. Oleff. “Semi-Automatized Assessment of Requirement Interrelations.” In <i>15th International Design Conference</i>, 15:S. 325-334, 2018. <a href=\"https://doi.org/10.21278/idc.2018.0298\">https://doi.org/10.21278/idc.2018.0298</a>.","short":"I. Gräßler, P. Scholle, J. Hentze, C. Oleff, in: 15th International Design Conference, 2018, p. S. 325-334.","ama":"Gräßler I, Scholle P, Hentze J, Oleff C. Semi-Automatized Assessment of Requirement Interrelations. In: <i>15th International Design Conference</i>. Vol 15. ; 2018:S. 325-334. doi:<a href=\"https://doi.org/10.21278/idc.2018.0298\">10.21278/idc.2018.0298</a>"},"type":"conference","department":[{"_id":"26"},{"_id":"624"},{"_id":"219"}],"date_created":"2021-05-05T09:39:24Z"},{"date_created":"2021-05-05T09:39:26Z","department":[{"_id":"26"},{"_id":"624"},{"_id":"219"}],"type":"conference","citation":{"apa":"Gräßler, I., Oleff, C., &#38; Scholle, P. (2018). Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte. <i>Design for X - Beiträge Zum 29. DfX-Symposium</i>, <i>29</i>, 333–344. <a href=\"https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte\">https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte</a>","ieee":"I. Gräßler, C. Oleff, and P. Scholle, “Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte,” in <i>Design for X - Beiträge zum 29. DfX-Symposium</i>, 2018, vol. 29, pp. 333–344, doi: <a href=\"https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte\">https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte</a>.","short":"I. Gräßler, C. Oleff, P. Scholle, in: Design for X - Beiträge Zum 29. DfX-Symposium, 2018, pp. 333–344.","chicago":"Gräßler, I., C. Oleff, and P. Scholle. “Methode Zur Bewertung von Anforderungsänderungen Additiv Gefertigter Produkte.” In <i>Design for X - Beiträge Zum 29. DfX-Symposium</i>, 29:333–44, 2018. <a href=\"https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte\">https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte</a>.","mla":"Gräßler, I., et al. “Methode Zur Bewertung von Anforderungsänderungen Additiv Gefertigter Produkte.” <i>Design for X - Beiträge Zum 29. DfX-Symposium</i>, vol. 29, 2018, pp. 333–44, doi:<a href=\"https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte\">https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte</a>.","ama":"Gräßler I, Oleff C, Scholle P. Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte. In: <i>Design for X - Beiträge Zum 29. DfX-Symposium</i>. Vol 29. ; 2018:333-344. doi:<a href=\"https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte\">https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte</a>","bibtex":"@inproceedings{Gräßler_Oleff_Scholle_2018, title={Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte}, volume={29}, DOI={<a href=\"https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte\">https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte</a>}, booktitle={Design for X - Beiträge zum 29. DfX-Symposium}, author={Gräßler, I. and Oleff, C. and Scholle, P.}, year={2018}, pages={333–344} }"},"publication":"Design for X - Beiträge zum 29. DfX-Symposium","abstract":[{"text":"In this paper, a novel approach towards risk classification of requirements of additively manufactured (AM) products is presented. The classification of an individual requirement is based on two aspects: a) influence factors implying dynamics of its specification and b) network indices quantifying the degree of cross-linkage with other requirements. Both aspects can indicate requirement changes. Influences on a requirement are assessed by a priority index based on criteria ‘uncertainty’, ‘dynamics’ and ‘relevance for product development’. Effects from other requirements are captured by network theoretical indices such as active and passive sum. In the end, requirements are classified accord-ing to their criticality. By this approach, requirements can be identified which might strongly affect the product development process of AM products.","lang":"eng"}],"_id":"21999","language":[{"iso":"eng"}],"page":"333-344","volume":29,"user_id":"5786","doi":"https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte","author":[{"last_name":"Gräßler","first_name":"I.","full_name":"Gräßler, I."},{"first_name":"C.","last_name":"Oleff","full_name":"Oleff, C."},{"last_name":"Scholle","first_name":"P.","full_name":"Scholle, P."}],"year":"2018","status":"public","title":"Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte","intvolume":"        29","date_updated":"2022-01-06T06:55:22Z"},{"publisher":"Springer","_id":"22","page":"132-151","volume":10773,"editor":[{"full_name":"Klusáček, D.","first_name":"D.","last_name":"Klusáček"},{"full_name":"Cirne, W.","first_name":"W.","last_name":"Cirne"},{"first_name":"N.","last_name":"Desai","full_name":"Desai, N."}],"user_id":"15274","conference":{"end_date":"2017-06-02","name":"21st Workshop on Job Scheduling Strategies for Parallel Processing","start_date":"2017-06-02","location":"Orlando, FL, USA"},"status":"public","citation":{"bibtex":"@inproceedings{Keller_2018, series={Lecture Notes in Computer Science}, title={A Data Structure for Planning Based Workload Management of Heterogeneous HPC Systems}, volume={10773}, DOI={<a href=\"https://doi.org/10.1007/978-3-319-77398-8_8\">10.1007/978-3-319-77398-8_8</a>}, booktitle={Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)}, publisher={Springer}, author={Keller, Axel}, editor={Klusáček, D. and Cirne, W. and Desai, N.Editors}, year={2018}, pages={132–151}, collection={Lecture Notes in Computer Science} }","chicago":"Keller, Axel. “A Data Structure for Planning Based Workload Management of Heterogeneous HPC Systems.” In <i>Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)</i>, edited by D. Klusáček, W. Cirne, and N. Desai, 10773:132–51. Lecture Notes in Computer Science. Springer, 2018. <a href=\"https://doi.org/10.1007/978-3-319-77398-8_8\">https://doi.org/10.1007/978-3-319-77398-8_8</a>.","short":"A. Keller, in: D. Klusáček, W. Cirne, N. Desai (Eds.), Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP), Springer, 2018, pp. 132–151.","ama":"Keller A. A Data Structure for Planning Based Workload Management of Heterogeneous HPC Systems. In: Klusáček D, Cirne W, Desai N, eds. <i>Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)</i>. Vol 10773. Lecture Notes in Computer Science. Springer; 2018:132-151. doi:<a href=\"https://doi.org/10.1007/978-3-319-77398-8_8\">10.1007/978-3-319-77398-8_8</a>","ieee":"A. Keller, “A Data Structure for Planning Based Workload Management of Heterogeneous HPC Systems,” in <i>Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)</i>, Orlando, FL, USA, 2018, vol. 10773, pp. 132–151.","apa":"Keller, A. (2018). A Data Structure for Planning Based Workload Management of Heterogeneous HPC Systems. In D. Klusáček, W. Cirne, &#38; N. Desai (Eds.), <i>Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)</i> (Vol. 10773, pp. 132–151). Orlando, FL, USA: Springer. <a href=\"https://doi.org/10.1007/978-3-319-77398-8_8\">https://doi.org/10.1007/978-3-319-77398-8_8</a>","mla":"Keller, Axel. “A Data Structure for Planning Based Workload Management of Heterogeneous HPC Systems.” <i>Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)</i>, edited by D. Klusáček et al., vol. 10773, Springer, 2018, pp. 132–51, doi:<a href=\"https://doi.org/10.1007/978-3-319-77398-8_8\">10.1007/978-3-319-77398-8_8</a>."},"language":[{"iso":"eng"}],"series_title":"Lecture Notes in Computer Science","doi":"10.1007/978-3-319-77398-8_8","author":[{"last_name":"Keller","first_name":"Axel","full_name":"Keller, Axel","id":"15274"}],"publication_identifier":{"isbn":["978-3-319-77398-8","978-3-319-77397-1"]},"year":"2018","title":"A Data Structure for Planning Based Workload Management of Heterogeneous HPC Systems","intvolume":"     10773","publication_status":"published","date_updated":"2022-01-06T06:55:22Z","date_created":"2017-07-25T14:54:08Z","department":[{"_id":"27"}],"type":"conference","keyword":["Scheduling Planning Mapping Workload management"],"publication":"Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)","abstract":[{"lang":"eng","text":"This paper describes a data structure and a heuristic to plan and map arbitrary resources in complex combinations while applying time dependent constraints. The approach is used in the planning based workload manager OpenCCS at the Paderborn Center for Parallel Computing (PC\\(^2\\)) to operate heterogeneous clusters with up to 10000 cores. We also show performance results derived from four years of operation."}]}]