[{"type":"preprint","oa":"1","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"date_created":"2023-03-20T09:13:23Z","abstract":[{"text":"<jats:title>Abstract</jats:title>\r\n        <jats:p>In this work, the influence of the filler matrix adhesion on the tensile properties of laser-sintered parts built with Polyamide 613 filled with glass beads was investigated. For this purpose, dry blends of glass beads with and without organosilane coupling agents and polyamide powder were prepared and processed into tensile specimens on an EOS P396. The samples were tested both in the dry state and after an accelerated conditioning in a climate chamber. Furthermore, FEM simulations were performed to model the limiting cases of optimum adhesion and no adhesion. By correlating the tensile tests with the simulation results and by analyzing the fracture surfaces, it was shown that the filler matrix adhesion is sufficient in the dry state but is strongly degraded by conditioning. Even the presence of various organosilane thin films could not prevent a strong deterioration of the filler-matrix adhesion and the associated deterioration of the mechanical properties. Since a comparison with an injection molded sample of the same polymer filler combination shows identical behavior after conditioning, it is assumed that this problem is not limited to additively manufactured parts.</jats:p>","lang":"eng"}],"citation":{"mla":"Kletetzka, Ivo, et al. <i>Influence of the Filler Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser Sintered Parts Built with Polyamide Glass Bead Dry Blends</i>. Research Square Platform LLC, 2023.","bibtex":"@article{Kletetzka_Kosanke_Meinderink_Neßlinger_Grundmeier_Schmid_2023, title={Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends}, publisher={Research Square Platform LLC}, author={Kletetzka, Ivo and Kosanke, Maren and Meinderink, Dennis and Neßlinger, Vanessa and Grundmeier, Guido and Schmid, Hans-Joachim}, year={2023} }","ama":"Kletetzka I, Kosanke M, Meinderink D, Neßlinger V, Grundmeier G, Schmid H-J. Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends. Published online 2023.","ieee":"I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends.” Research Square Platform LLC, 2023.","apa":"Kletetzka, I., Kosanke, M., Meinderink, D., Neßlinger, V., Grundmeier, G., &#38; Schmid, H.-J. (2023). <i>Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends</i>. Research Square Platform LLC.","short":"I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, H.-J. Schmid, (2023).","chicago":"Kletetzka, Ivo, Maren Kosanke, Dennis Meinderink, Vanessa Neßlinger, Guido Grundmeier, and Hans-Joachim Schmid. “Influence of the Filler Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser Sintered Parts Built with Polyamide Glass Bead Dry Blends.” Research Square Platform LLC, 2023."},"user_id":"50769","main_file_link":[{"url":"https://www.researchsquare.com/article/rs-2664324/v1","open_access":"1"}],"publisher":"Research Square Platform LLC","_id":"43049","language":[{"iso":"eng"}],"date_updated":"2023-09-07T11:52:39Z","publication_status":"published","title":"Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends","status":"public","year":"2023","author":[{"last_name":"Kletetzka","first_name":"Ivo","full_name":"Kletetzka, Ivo"},{"full_name":"Kosanke, Maren","first_name":"Maren","last_name":"Kosanke"},{"full_name":"Meinderink, Dennis","last_name":"Meinderink","first_name":"Dennis"},{"last_name":"Neßlinger","first_name":"Vanessa","full_name":"Neßlinger, Vanessa"},{"full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido"},{"full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim","last_name":"Schmid"}]},{"type":"conference_abstract","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"date_created":"2023-06-27T08:32:16Z","citation":{"ieee":"I. Kletetzka, “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” presented at the Mobility goes Additve, Berlin, 2023.","apa":"Kletetzka, I. (2023). <i>Tensile Testing for Polymer AM - Best Pratice at the DMRC</i>. Mobility goes Additve, Berlin.","short":"I. Kletetzka, in: 2023.","chicago":"Kletetzka, Ivo. “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” 2023.","mla":"Kletetzka, Ivo. <i>Tensile Testing for Polymer AM - Best Pratice at the DMRC</i>. 2023.","bibtex":"@inproceedings{Kletetzka_2023, title={Tensile Testing for Polymer AM - Best Pratice at the DMRC}, author={Kletetzka, Ivo}, year={2023} }","ama":"Kletetzka I. Tensile Testing for Polymer AM - Best Pratice at the DMRC. In: ; 2023."},"user_id":"50769","language":[{"iso":"eng"}],"_id":"45783","publication_status":"published","date_updated":"2023-09-07T11:52:08Z","year":"2023","status":"public","title":"Tensile Testing for Polymer AM - Best Pratice at the DMRC","author":[{"full_name":"Kletetzka, Ivo","first_name":"Ivo","last_name":"Kletetzka","id":"50769"}],"conference":{"end_date":"2023-05-31","location":"Berlin","start_date":"2023-05-31","name":"Mobility goes Additve"}},{"quality_controlled":"1","citation":{"bibtex":"@article{Klippstein_Kletetzka_Sural_Schmid_2023, title={Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties}, DOI={<a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>}, journal={The International Journal of Advanced Manufacturing Technology }, publisher={Springer}, author={Klippstein, Sven Helge and Kletetzka, Ivo and Sural, Ilknur and Schmid, Hans-Joachim}, year={2023} }","chicago":"Klippstein, Sven Helge, Ivo Kletetzka, Ilknur Sural, and Hans-Joachim Schmid. “Influence of a Prolonged Shelf Time on PA12 Laser Sintering Powder and Resulting Part Properties.” <i>The International Journal of Advanced Manufacturing Technology </i>, 2023. <a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>.","ama":"Klippstein SH, Kletetzka I, Sural I, Schmid H-J. Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties. <i>The International Journal of Advanced Manufacturing Technology </i>. Published online 2023. doi:<a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>","short":"S.H. Klippstein, I. Kletetzka, I. Sural, H.-J. Schmid, The International Journal of Advanced Manufacturing Technology  (2023).","ieee":"S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” <i>The International Journal of Advanced Manufacturing Technology </i>, 2023, doi: <a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>.","mla":"Klippstein, Sven Helge, et al. “Influence of a Prolonged Shelf Time on PA12 Laser Sintering Powder and Resulting Part Properties.” <i>The International Journal of Advanced Manufacturing Technology </i>, Springer, 2023, doi:<a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>.","apa":"Klippstein, S. H., Kletetzka, I., Sural, I., &#38; Schmid, H.-J. (2023). Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties. <i>The International Journal of Advanced Manufacturing Technology </i>. <a href=\"https://doi.org/10.1007/s00170-023-11243-1\">https://doi.org/10.1007/s00170-023-11243-1</a>"},"oa":"1","status":"public","user_id":"50769","_id":"43046","publisher":"Springer","abstract":[{"text":"In the laser sintering technology, the semi-crystalline polymer material is exposed to elevated temperatures during processing, which leads to serious material ageing for most materials. This has already been investigated intensively by various authors. However, the ageing of the material at ambient temperatures during shelf life has not been the focus so far. The need to analyse the shelf life can be derived from an ecological and economic point of view. This work is focusing on the shelf life of PA2200 (PA12). To reduce the potential influences of powder production fluctuations, two different powder batches stored for 5.5 years and 6.5 years are investigated and compared to a reference powder produced 0.5 years before these investigations. Multiple powder analyses and part characterisations have been performed. A significant yellowing and molecular chain length reduction can be derived from the measurement results. Whereas the influence on mechanical part performance was minor, the parts built with the stored powders are more yellowish. As it is most likely that this is due to the consumption of polyamide stabilisers, it can be assumed that these parts will be subject to significantly faster ageing. Therefore, it is still not recommended to use the stored powders for critical parts or light intense and humid environments.","lang":"eng"}],"publication":"The International Journal of Advanced Manufacturing Technology ","keyword":["Selective laser sintering","Shelf life","Polyamide 12","powder","PA2200","material ageing"],"type":"journal_article","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"date_created":"2023-03-18T14:28:46Z","publication_status":"published","date_updated":"2023-09-07T11:57:59Z","title":"Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties","year":"2023","author":[{"id":"71545","full_name":"Klippstein, Sven Helge","last_name":"Klippstein","first_name":"Sven Helge"},{"id":"50769","full_name":"Kletetzka, Ivo","first_name":"Ivo","last_name":"Kletetzka"},{"full_name":"Sural, Ilknur","first_name":"Ilknur","last_name":"Sural"},{"full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464"}],"doi":"https://doi.org/10.1007/s00170-023-11243-1","main_file_link":[{"open_access":"1","url":"https://link.springer.com/article/10.1007/s00170-023-11243-1"}],"language":[{"iso":"eng"}]},{"user_id":"72307","_id":"46861","language":[{"iso":"ger"}],"date_updated":"2023-09-07T12:02:38Z","author":[{"full_name":"Sajadi, Said","first_name":"Said","last_name":"Sajadi"}],"status":"public","year":"2023","title":"Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess","department":[{"_id":"150"},{"_id":"219"},{"_id":"624"},{"_id":"9"}],"type":"bachelorsthesis","date_created":"2023-09-07T11:57:48Z","supervisor":[{"first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464"},{"full_name":"Jesinghausen, Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","first_name":"Steffen","last_name":"Jesinghausen","id":"3959"},{"full_name":"Neitzel, Fabian","last_name":"Neitzel","first_name":"Fabian","orcid":"0009-0004-8412-3645 ","id":"72307"}],"citation":{"ama":"Sajadi S. <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>.; 2023.","bibtex":"@book{Sajadi_2023, title={Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess}, author={Sajadi, Said}, year={2023} }","mla":"Sajadi, Said. <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>. 2023.","chicago":"Sajadi, Said. <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>, 2023.","short":"S. Sajadi, Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess, 2023.","apa":"Sajadi, S. (2023). <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>.","ieee":"S. Sajadi, <i>Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess</i>. 2023."}},{"date_updated":"2023-09-14T07:59:00Z","year":"2023","status":"public","title":"Minimizing Eye Movements and Distractions in Head-Mounted Augmented Reality through Eye-Gaze Adaptiveness","author":[{"full_name":"Wecker, Daniel ","first_name":"Daniel ","last_name":"Wecker"},{"first_name":"Enes","orcid":"0000-0002-5967-833X","last_name":"Yigitbas","full_name":"Yigitbas, Enes","id":"8447"}],"user_id":"8447","publisher":"ACM","_id":"47050","language":[{"iso":"eng"}],"publication":"Proceedings of the ACM Symposium on Spatial User Interaction (SUI 2023)","citation":{"ama":"Wecker D, Yigitbas E. Minimizing Eye Movements and Distractions in Head-Mounted Augmented Reality through Eye-Gaze Adaptiveness. In: <i>Proceedings of the ACM Symposium on Spatial User Interaction (SUI 2023)</i>. ACM; 2023.","bibtex":"@inproceedings{Wecker_Yigitbas_2023, title={Minimizing Eye Movements and Distractions in Head-Mounted Augmented Reality through Eye-Gaze Adaptiveness}, booktitle={Proceedings of the ACM Symposium on Spatial User Interaction (SUI 2023)}, publisher={ACM}, author={Wecker, Daniel  and Yigitbas, Enes}, year={2023} }","mla":"Wecker, Daniel, and Enes Yigitbas. “Minimizing Eye Movements and Distractions in Head-Mounted Augmented Reality through Eye-Gaze Adaptiveness.” <i>Proceedings of the ACM Symposium on Spatial User Interaction (SUI 2023)</i>, ACM, 2023.","chicago":"Wecker, Daniel , and Enes Yigitbas. “Minimizing Eye Movements and Distractions in Head-Mounted Augmented Reality through Eye-Gaze Adaptiveness.” In <i>Proceedings of the ACM Symposium on Spatial User Interaction (SUI 2023)</i>. ACM, 2023.","short":"D. Wecker, E. Yigitbas, in: Proceedings of the ACM Symposium on Spatial User Interaction (SUI 2023), ACM, 2023.","apa":"Wecker, D., &#38; Yigitbas, E. (2023). Minimizing Eye Movements and Distractions in Head-Mounted Augmented Reality through Eye-Gaze Adaptiveness. <i>Proceedings of the ACM Symposium on Spatial User Interaction (SUI 2023)</i>.","ieee":"D. Wecker and E. Yigitbas, “Minimizing Eye Movements and Distractions in Head-Mounted Augmented Reality through Eye-Gaze Adaptiveness,” 2023."},"type":"conference","department":[{"_id":"66"},{"_id":"534"}],"date_created":"2023-09-14T07:58:51Z"},{"date_created":"2023-09-14T08:02:14Z","department":[{"_id":"66"},{"_id":"534"}],"type":"journal_article","citation":{"apa":"Yigitbas, E., Schmidt, M., Bucchiarone, A., Gottschalk, S., &#38; Engels, G. (2023). GaMoVR: Gamification-Based UML Learning Environment in Virtual Reality. <i>Science of Computer Programming</i>.","ieee":"E. Yigitbas, M. Schmidt, A. Bucchiarone, S. Gottschalk, and G. Engels, “GaMoVR: Gamification-Based UML Learning Environment in Virtual Reality,” <i>Science of Computer Programming</i>, 2023.","short":"E. Yigitbas, M. Schmidt, A. Bucchiarone, S. Gottschalk, G. Engels, Science of Computer Programming (2023).","chicago":"Yigitbas, Enes, Maximilian Schmidt, Antonio Bucchiarone, Sebastian Gottschalk, and Gregor Engels. “GaMoVR: Gamification-Based UML Learning Environment in Virtual Reality.” <i>Science of Computer Programming</i>, 2023.","mla":"Yigitbas, Enes, et al. “GaMoVR: Gamification-Based UML Learning Environment in Virtual Reality.” <i>Science of Computer Programming</i>, Elsevier, 2023.","ama":"Yigitbas E, Schmidt M, Bucchiarone A, Gottschalk S, Engels G. GaMoVR: Gamification-Based UML Learning Environment in Virtual Reality. <i>Science of Computer Programming</i>. Published online 2023.","bibtex":"@article{Yigitbas_Schmidt_Bucchiarone_Gottschalk_Engels_2023, title={GaMoVR: Gamification-Based UML Learning Environment in Virtual Reality}, journal={Science of Computer Programming}, publisher={Elsevier}, author={Yigitbas, Enes and Schmidt, Maximilian and Bucchiarone, Antonio and Gottschalk, Sebastian and Engels, Gregor}, year={2023} }"},"publication":"Science of Computer Programming","_id":"47051","language":[{"iso":"eng"}],"publisher":"Elsevier","user_id":"8447","author":[{"id":"8447","last_name":"Yigitbas","orcid":"0000-0002-5967-833X","first_name":"Enes","full_name":"Yigitbas, Enes"},{"first_name":"Maximilian","last_name":"Schmidt","full_name":"Schmidt, Maximilian"},{"first_name":"Antonio","last_name":"Bucchiarone","full_name":"Bucchiarone, Antonio"},{"full_name":"Gottschalk, Sebastian","first_name":"Sebastian","last_name":"Gottschalk","id":"47208"},{"full_name":"Engels, Gregor","last_name":"Engels","first_name":"Gregor","id":"107"}],"year":"2023","status":"public","title":"GaMoVR: Gamification-Based UML Learning Environment in Virtual Reality","date_updated":"2023-09-14T08:02:26Z"},{"publication":"Proceedings of the 27th International Workshop on Personalization and Recommendation","citation":{"apa":"Schmidt, L., &#38; Yigitbas, E. (2023). Transitional Cross Reality Interfaces for Spatially Demanding Search and Collect Tasks . <i>Proceedings of the 27th International Workshop on Personalization and Recommendation</i>.","ieee":"L. Schmidt and E. Yigitbas, “Transitional Cross Reality Interfaces for Spatially Demanding Search and Collect Tasks ,” 2023.","short":"L. Schmidt, E. Yigitbas, in: Proceedings of the 27th International Workshop on Personalization and Recommendation, GI DL, 2023.","chicago":"Schmidt, Leonard, and Enes Yigitbas. “Transitional Cross Reality Interfaces for Spatially Demanding Search and Collect Tasks .” In <i>Proceedings of the 27th International Workshop on Personalization and Recommendation</i>. GI DL, 2023.","mla":"Schmidt, Leonard, and Enes Yigitbas. “Transitional Cross Reality Interfaces for Spatially Demanding Search and Collect Tasks .” <i>Proceedings of the 27th International Workshop on Personalization and Recommendation</i>, GI DL, 2023.","ama":"Schmidt L, Yigitbas E. Transitional Cross Reality Interfaces for Spatially Demanding Search and Collect Tasks . In: <i>Proceedings of the 27th International Workshop on Personalization and Recommendation</i>. GI DL; 2023.","bibtex":"@inproceedings{Schmidt_Yigitbas_2023, title={Transitional Cross Reality Interfaces for Spatially Demanding Search and Collect Tasks }, booktitle={Proceedings of the 27th International Workshop on Personalization and Recommendation}, publisher={GI DL}, author={Schmidt, Leonard and Yigitbas, Enes}, year={2023} }"},"type":"conference","department":[{"_id":"66"},{"_id":"534"}],"date_created":"2023-09-14T08:30:35Z","date_updated":"2023-09-14T08:30:46Z","year":"2023","status":"public","title":"Transitional Cross Reality Interfaces for Spatially Demanding Search and Collect Tasks ","author":[{"full_name":"Schmidt, Leonard","first_name":"Leonard","last_name":"Schmidt"},{"id":"8447","last_name":"Yigitbas","orcid":"0000-0002-5967-833X","first_name":"Enes","full_name":"Yigitbas, Enes"}],"user_id":"8447","_id":"47057","language":[{"iso":"eng"}],"publisher":"GI DL"},{"author":[{"full_name":"Neumayr, Thomas","first_name":"Thomas","last_name":"Neumayr"},{"id":"8447","orcid":"0000-0002-5967-833X","first_name":"Enes","last_name":"Yigitbas","full_name":"Yigitbas, Enes"},{"last_name":"Augstein","first_name":"Mirjam","full_name":"Augstein, Mirjam"},{"first_name":"Eelco","last_name":"Herder","full_name":"Herder, Eelco"}],"year":"2023","title":"ABIS 2023 – 27th International Workshop on Personalization and Recommendation","status":"public","date_updated":"2023-09-14T08:27:09Z","_id":"47055","language":[{"iso":"eng"}],"user_id":"8447","citation":{"mla":"Neumayr, Thomas, et al. “ABIS 2023 – 27th International Workshop on Personalization and Recommendation.” <i>Proceedings of the Mensch &#38; Computer (2023)</i>, 2023.","ama":"Neumayr T, Yigitbas E, Augstein M, Herder E. ABIS 2023 – 27th International Workshop on Personalization and Recommendation. In: <i>Proceedings of the Mensch &#38; Computer (2023)</i>. ; 2023.","bibtex":"@inproceedings{Neumayr_Yigitbas_Augstein_Herder_2023, title={ABIS 2023 – 27th International Workshop on Personalization and Recommendation}, booktitle={Proceedings of the Mensch &#38; Computer (2023)}, author={Neumayr, Thomas and Yigitbas, Enes and Augstein, Mirjam and Herder, Eelco}, year={2023} }","apa":"Neumayr, T., Yigitbas, E., Augstein, M., &#38; Herder, E. (2023). ABIS 2023 – 27th International Workshop on Personalization and Recommendation. <i>Proceedings of the Mensch &#38; Computer (2023)</i>.","ieee":"T. Neumayr, E. Yigitbas, M. Augstein, and E. Herder, “ABIS 2023 – 27th International Workshop on Personalization and Recommendation,” 2023.","chicago":"Neumayr, Thomas, Enes Yigitbas, Mirjam Augstein, and Eelco Herder. “ABIS 2023 – 27th International Workshop on Personalization and Recommendation.” In <i>Proceedings of the Mensch &#38; Computer (2023)</i>, 2023.","short":"T. Neumayr, E. Yigitbas, M. Augstein, E. Herder, in: Proceedings of the Mensch &#38; Computer (2023), 2023."},"publication":"Proceedings of the Mensch & Computer (2023)","date_created":"2023-09-14T08:26:34Z","department":[{"_id":"66"},{"_id":"534"}],"type":"conference"},{"date_updated":"2023-09-21T09:24:14Z","year":"2023","title":"Virtual Reality Collaboration Platform for Agile Software Development","status":"public","author":[{"full_name":"Yigitbas, Enes","orcid":"0000-0002-5967-833X","last_name":"Yigitbas","first_name":"Enes","id":"8447"},{"first_name":"Iwo","last_name":"Witalinski","full_name":"Witalinski, Iwo"},{"id":"47208","last_name":"Gottschalk","first_name":"Sebastian","full_name":"Gottschalk, Sebastian"},{"id":"107","full_name":"Engels, Gregor","first_name":"Gregor","last_name":"Engels"}],"user_id":"8447","language":[{"iso":"eng"}],"_id":"47150","publisher":"Springer","publication":"Proceedings of the 24th International Conference on Product-Focused Software Process Improvement (PROFES 2023)","citation":{"bibtex":"@inproceedings{Yigitbas_Witalinski_Gottschalk_Engels_2023, title={Virtual Reality Collaboration Platform for Agile Software Development}, booktitle={Proceedings of the 24th International Conference on Product-Focused Software Process Improvement (PROFES 2023)}, publisher={Springer}, author={Yigitbas, Enes and Witalinski, Iwo and Gottschalk, Sebastian and Engels, Gregor}, year={2023} }","chicago":"Yigitbas, Enes, Iwo Witalinski, Sebastian Gottschalk, and Gregor Engels. “Virtual Reality Collaboration Platform for Agile Software Development.” In <i>Proceedings of the 24th International Conference on Product-Focused Software Process Improvement (PROFES 2023)</i>. Springer, 2023.","short":"E. Yigitbas, I. Witalinski, S. Gottschalk, G. Engels, in: Proceedings of the 24th International Conference on Product-Focused Software Process Improvement (PROFES 2023), Springer, 2023.","ama":"Yigitbas E, Witalinski I, Gottschalk S, Engels G. Virtual Reality Collaboration Platform for Agile Software Development. In: <i>Proceedings of the 24th International Conference on Product-Focused Software Process Improvement (PROFES 2023)</i>. Springer; 2023.","ieee":"E. Yigitbas, I. Witalinski, S. Gottschalk, and G. Engels, “Virtual Reality Collaboration Platform for Agile Software Development,” 2023.","apa":"Yigitbas, E., Witalinski, I., Gottschalk, S., &#38; Engels, G. (2023). Virtual Reality Collaboration Platform for Agile Software Development. <i>Proceedings of the 24th International Conference on Product-Focused Software Process Improvement (PROFES 2023)</i>.","mla":"Yigitbas, Enes, et al. “Virtual Reality Collaboration Platform for Agile Software Development.” <i>Proceedings of the 24th International Conference on Product-Focused Software Process Improvement (PROFES 2023)</i>, Springer, 2023."},"type":"conference","department":[{"_id":"66"},{"_id":"534"}],"date_created":"2023-09-21T09:24:02Z"},{"quality_controlled":"1","citation":{"ama":"Kersting L, Arian B, Rozo Vasquez J, Trächtler A, Homberg W, Walther F. Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung. <i>at - Automatisierungstechnik</i>. 2023;71(1):68-81. doi:<a href=\"https://doi.org/10.1515/auto-2022-0106\">10.1515/auto-2022-0106</a>","bibtex":"@article{Kersting_Arian_Rozo Vasquez_Trächtler_Homberg_Walther_2023, title={Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung}, volume={71}, DOI={<a href=\"https://doi.org/10.1515/auto-2022-0106\">10.1515/auto-2022-0106</a>}, number={1}, journal={at - Automatisierungstechnik}, publisher={Walter de Gruyter GmbH}, author={Kersting, Lukas and Arian, Bahman and Rozo Vasquez, Julian and Trächtler, Ansgar and Homberg, Werner and Walther, Frank}, year={2023}, pages={68–81} }","mla":"Kersting, Lukas, et al. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.” <i>At - Automatisierungstechnik</i>, vol. 71, no. 1, Walter de Gruyter GmbH, 2023, pp. 68–81, doi:<a href=\"https://doi.org/10.1515/auto-2022-0106\">10.1515/auto-2022-0106</a>.","short":"L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther, At - Automatisierungstechnik 71 (2023) 68–81.","chicago":"Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.” <i>At - Automatisierungstechnik</i> 71, no. 1 (2023): 68–81. <a href=\"https://doi.org/10.1515/auto-2022-0106\">https://doi.org/10.1515/auto-2022-0106</a>.","apa":"Kersting, L., Arian, B., Rozo Vasquez, J., Trächtler, A., Homberg, W., &#38; Walther, F. (2023). Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung. <i>At - Automatisierungstechnik</i>, <i>71</i>(1), 68–81. <a href=\"https://doi.org/10.1515/auto-2022-0106\">https://doi.org/10.1515/auto-2022-0106</a>","ieee":"L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung,” <i>at - Automatisierungstechnik</i>, vol. 71, no. 1, pp. 68–81, 2023, doi: <a href=\"https://doi.org/10.1515/auto-2022-0106\">10.1515/auto-2022-0106</a>."},"status":"public","volume":71,"user_id":"552","_id":"44312","publisher":"Walter de Gruyter GmbH","page":"68-81","abstract":[{"text":"<jats:title>Zusammenfassung</jats:title>\r\n               <jats:p>Aufgrund aktueller Transformationsprozesse kommt der automatisierten und ressourceneffizienten Fertigung hochfester Leichtbauteile eine steigende Bedeutung zu, beispielsweise im Flugzeug- und Fahrzeugbau. Für kleine Losgrößen bietet sich hier insbesondere das Fertigungsverfahren des Drückwalzens an. Der konventionelle, industriell genutzte Drückwalzprozess stößt allerdings aufgrund der Prozesskomplexität hinsichtlich der Reproduzierbarkeit an seine Grenzen. Dies wird in der Praxis teilweise durch personengebundenes Erfahrungswissen kompensiert. Auch ist es nicht möglich, Bauteileigenschaften definiert einzustellen. Aus diesem Grund bietet der Einsatz einer neuartigen Eigenschaftsregelung Chancen zur Weiterentwicklung des Fertigungsprozesses und die Möglichkeit zur Prozessautomatisierung. Hier werden die Werkzeugbahnen abhängig einer Online-Eigenschaftsmessung über eine zusätzliche Reglerkaskade manipuliert. Die Entwicklung einer solchen Eigenschaftsregelung erfordert den Einsatz geeigneter, modellbasierter Entwurfsmethoden. In diesem Beitrag wird daher ein regelungstechnisches Systemmodell für das Drückwalzen metastabiler austenitischer Edelstähle vorgestellt. Das Simulationsmodell weist aufgrund seiner Echtzeitfähigkeit neben dem Einsatz als reines Entwurfsmodell weitere Nutzungsmöglichkeiten z.B. in Beobachtern auf und grenzt sich somit von domänenspezifischen Simulationstools wie der FEM ab.</jats:p>","lang":"eng"}],"publication":"at - Automatisierungstechnik","issue":"1","department":[{"_id":"156"},{"_id":"241"},{"_id":"153"}],"type":"journal_article","keyword":["Electrical and Electronic Engineering","Computer Science Applications","Control and Systems Engineering"],"date_created":"2023-05-02T09:35:01Z","intvolume":"        71","publication_status":"published","date_updated":"2023-09-25T10:08:25Z","publication_identifier":{"issn":["0178-2312","2196-677X"]},"author":[{"full_name":"Kersting, Lukas","first_name":"Lukas","last_name":"Kersting"},{"full_name":"Arian, Bahman","first_name":"Bahman","last_name":"Arian","id":"36287"},{"full_name":"Rozo Vasquez, Julian","last_name":"Rozo Vasquez","first_name":"Julian"},{"full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar","id":"552"},{"full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner","id":"233"},{"full_name":"Walther, Frank","first_name":"Frank","last_name":"Walther"}],"title":"Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung","year":"2023","doi":"10.1515/auto-2022-0106","language":[{"iso":"eng"}]},{"citation":{"mla":"Kersting, Lukas, et al. “Control Strategy for Angular Gradations by Means of the Flow Forming Process.” <i>Materials Research Proceedings</i>, Materials Research Forum LLC, 2023, doi:<a href=\"https://doi.org/10.21741/9781644902479-220\">10.21741/9781644902479-220</a>.","apa":"Kersting, L., Arian, B., Rozo Vasquez, J., Trächtler, A., Homberg, W., &#38; Walther, F. (2023). Control strategy for angular gradations by means of the flow forming process. <i>Materials Research Proceedings</i>. <a href=\"https://doi.org/10.21741/9781644902479-220\">https://doi.org/10.21741/9781644902479-220</a>","ieee":"L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Control strategy for angular gradations by means of the flow forming process,” 2023, doi: <a href=\"https://doi.org/10.21741/9781644902479-220\">10.21741/9781644902479-220</a>.","short":"L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.","ama":"Kersting L, Arian B, Rozo Vasquez J, Trächtler A, Homberg W, Walther F. Control strategy for angular gradations by means of the flow forming process. In: <i>Materials Research Proceedings</i>. Materials Research Forum LLC; 2023. doi:<a href=\"https://doi.org/10.21741/9781644902479-220\">10.21741/9781644902479-220</a>","chicago":"Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, and Frank Walther. “Control Strategy for Angular Gradations by Means of the Flow Forming Process.” In <i>Materials Research Proceedings</i>. Materials Research Forum LLC, 2023. <a href=\"https://doi.org/10.21741/9781644902479-220\">https://doi.org/10.21741/9781644902479-220</a>.","bibtex":"@inproceedings{Kersting_Arian_Rozo Vasquez_Trächtler_Homberg_Walther_2023, title={Control strategy for angular gradations by means of the flow forming process}, DOI={<a href=\"https://doi.org/10.21741/9781644902479-220\">10.21741/9781644902479-220</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Kersting, Lukas and Arian, Bahman and Rozo Vasquez, Julian and Trächtler, Ansgar and Homberg, Werner and Walther, Frank}, year={2023} }"},"publication":"Materials Research Proceedings","quality_controlled":"1","abstract":[{"lang":"eng","text":"<jats:p>Abstract. Climate change, rare resources and industrial transformation processes lead to a rising demand of multi-complex lightweight forming parts, especially in aerospace and automotive sectors. In these industries, flow forming is often used to produce cylindrical forming parts by reducing the wall thickness of tubular semifinished parts, e.g. for the production of hydraulic cylinders or gear shafts. The complexity and functionality of flow forming workpieces could be significantly increased by locally graded microstructure and geometry structures. This enables customized complex hardness distributions at wear surfaces or magnetic QR codes for a unique, tamper-proof product identification. The production of those complex, 2D (axial and angular) graded forming parts currently depicts a great challenge for the process and requires new solutions and strategies. Hence, this paper proposes a novel control strategy that includes online measurements from an absolute encoder to determine the angular workpiece position. Workpieces of AISI 304L stainless steel with 2D-graded structures are successfully manufactured using this new strategy and analyzed regarding the possible accuracy and resolution of the gradation. At this point, a dependency of the gradations on the sensor and actuator dynamics, accuracy and geometry could be noted. It is further evaluated how the control strategy could be extended by an observer-based closed-loop property control approach to enhance the accuracy of the suggested strategy. </jats:p>"}],"date_created":"2023-05-02T09:46:20Z","department":[{"_id":"156"},{"_id":"241"},{"_id":"153"}],"type":"conference","author":[{"full_name":"Kersting, Lukas","last_name":"Kersting","first_name":"Lukas"},{"id":"36287","full_name":"Arian, Bahman","first_name":"Bahman","last_name":"Arian"},{"last_name":"Rozo Vasquez","first_name":"Julian","full_name":"Rozo Vasquez, Julian"},{"id":"552","full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar"},{"id":"233","last_name":"Homberg","first_name":"Werner","full_name":"Homberg, Werner"},{"last_name":"Walther","first_name":"Frank","full_name":"Walther, Frank"}],"publication_identifier":{"issn":["2474-395X"]},"status":"public","title":"Control strategy for angular gradations by means of the flow forming process","year":"2023","publication_status":"published","date_updated":"2023-09-25T10:09:06Z","_id":"44315","language":[{"iso":"eng"}],"publisher":"Materials Research Forum LLC","user_id":"552","doi":"10.21741/9781644902479-220"},{"date_updated":"2023-09-25T10:10:05Z","title":"Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis","year":"2023","status":"public","author":[{"first_name":"Julian","last_name":"Rozo Vasquez","full_name":"Rozo Vasquez, Julian"},{"id":"36287","full_name":"Arian, Bahman","first_name":"Bahman","last_name":"Arian"},{"last_name":"Kersting","first_name":"Lukas","full_name":"Kersting, Lukas"},{"full_name":"Walther, Frank","first_name":"Frank","last_name":"Walther"},{"id":"233","first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"},{"id":"552","full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar"}],"user_id":"552","_id":"44318","language":[{"iso":"eng"}],"quality_controlled":"1","publication":"Metals","citation":{"ama":"Rozo Vasquez J, Arian B, Kersting L, Walther F, Homberg W, Trächtler A. Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis. <i>Metals</i>. Published online 2023.","short":"J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, A. Trächtler, Metals (2023).","chicago":"Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Detection of Phase Transformation during Plastic Deformation of Metastable Austenitic Steel AISI 304L by Means of X-Ray Diffraction Pattern Analysis.” <i>Metals</i>, 2023.","bibtex":"@article{Rozo Vasquez_Arian_Kersting_Walther_Homberg_Trächtler_2023, title={Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis}, journal={Metals}, author={Rozo Vasquez, Julian and Arian, Bahman and Kersting, Lukas and Walther, Frank and Homberg, Werner and Trächtler, Ansgar}, year={2023} }","apa":"Rozo Vasquez, J., Arian, B., Kersting, L., Walther, F., Homberg, W., &#38; Trächtler, A. (2023). Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis. <i>Metals</i>.","mla":"Rozo Vasquez, Julian, et al. “Detection of Phase Transformation during Plastic Deformation of Metastable Austenitic Steel AISI 304L by Means of X-Ray Diffraction Pattern Analysis.” <i>Metals</i>, 2023.","ieee":"J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, and A. Trächtler, “Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis,” <i>Metals</i>, 2023."},"type":"journal_article","department":[{"_id":"156"},{"_id":"241"},{"_id":"153"}],"date_created":"2023-05-02T10:07:29Z"},{"status":"public","conference":{"name":"45th Annual Conference of the Cognitive Science Society","location":"Sydney"},"user_id":"91018","_id":"46067","publisher":"Cognitive Science Society","quality_controlled":"1","project":[{"_id":"115","grant_number":"438445824","name":"TRR 318 - A05: TRR 318 - Echtzeitmessung der Aufmerksamkeit im Mensch-Roboter-Erklärdialog (Teilprojekt A05)"}],"popular_science":"1","citation":{"mla":"Singh, Amit, and Katharina J. Rohlfing. “Contrastiveness in the Context of Action Demonstration: An Eye-Tracking Study on Its Effects on Action Perception and Action Recall.” <i>Proceedings of the Annual Meeting of the Cognitive Science Society 45 (45)</i>, Cognitive Science Society, 2023.","bibtex":"@inproceedings{Singh_Rohlfing_2023, place={Sydney, Australia}, title={Contrastiveness in the context of action demonstration: an eye-tracking study on its effects on action perception and action recall}, booktitle={Proceedings of the Annual Meeting of the Cognitive Science Society 45 (45)}, publisher={Cognitive Science Society}, author={Singh, Amit and Rohlfing, Katharina J.}, year={2023} }","ama":"Singh A, Rohlfing KJ. Contrastiveness in the context of action demonstration: an eye-tracking study on its effects on action perception and action recall. In: <i>Proceedings of the Annual Meeting of the Cognitive Science Society 45 (45)</i>. Cognitive Science Society; 2023.","ieee":"A. Singh and K. J. Rohlfing, “Contrastiveness in the context of action demonstration: an eye-tracking study on its effects on action perception and action recall,” presented at the 45th Annual Conference of the Cognitive Science Society, Sydney, 2023.","apa":"Singh, A., &#38; Rohlfing, K. J. (2023). Contrastiveness in the context of action demonstration: an eye-tracking study on its effects on action perception and action recall. <i>Proceedings of the Annual Meeting of the Cognitive Science Society 45 (45)</i>. 45th Annual Conference of the Cognitive Science Society, Sydney.","short":"A. Singh, K.J. Rohlfing, in: Proceedings of the Annual Meeting of the Cognitive Science Society 45 (45), Cognitive Science Society, Sydney, Australia, 2023.","chicago":"Singh, Amit, and Katharina J. Rohlfing. “Contrastiveness in the Context of Action Demonstration: An Eye-Tracking Study on Its Effects on Action Perception and Action Recall.” In <i>Proceedings of the Annual Meeting of the Cognitive Science Society 45 (45)</i>. Sydney, Australia: Cognitive Science Society, 2023."},"oa":"1","place":"Sydney, Australia","date_updated":"2023-09-27T13:51:42Z","publication_status":"published","title":"Contrastiveness in the context of action demonstration: an eye-tracking study on its effects on action perception and action recall","year":"2023","author":[{"id":"91018","first_name":"Amit","last_name":"Singh","orcid":"0000-0002-7789-1521","full_name":"Singh, Amit"},{"last_name":"Rohlfing","first_name":"Katharina J.","full_name":"Rohlfing, Katharina J.","id":"50352"}],"main_file_link":[{"url":"https://escholarship.org/uc/item/2w94t4cv","open_access":"1"}],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"<p>The study investigates two different ways of guiding the addressee of an explanation - an explainee, through action demonstration: contrastive and non-contrastive. Their effect was tested on attention to specific action elements (goal) as well as on event memory. In an eye-tracking experiment, participants were shown different motion videos that were either contrastive or non-contrastive with respect to the segments of movement presentation. Given that everyday action demonstration is often multimodal, the stimuli were created with re- spect to their visual and verbal presentation. For visual presentation, a video combined two movements in a contrastive (e.g., Up-motion following a Down-motion) or non-contrastive way (e.g., two Up-motions following each other). For verbal presentation, each video was combined with a sequence of instruction descriptions in the form of negative (i.e., contrastive) or assertive (i.e., non-contrastive) guidance. It was found that a) attention to the event goal increased for this condition in the later time window, and b) participants’ recall of the event was facilitated when a visually contrastive motion was combined with a verbal contrast.</p>"}],"related_material":{"record":[{"relation":"contains","id":"46067","status":"public"}]},"publication":"Proceedings of the Annual Meeting of the Cognitive Science Society 45 (45)","type":"conference","keyword":["Attention","negation","contrastive  guidance","eye-movements","action understanding","event representation"],"department":[{"_id":"749"},{"_id":"660"}],"date_created":"2023-07-15T12:16:42Z"},{"date_created":"2024-10-09T14:50:09Z","type":"conference","keyword":["Explainable AI","Clinical decision support","Bayesian network","Counterfactual explanations"],"department":[{"_id":"660"}],"citation":{"ieee":"F. Liedeker and P. Cimiano, “A Prototype of an Interactive Clinical Decision Support System with Counterfactual Explanations,” presented at the xAI-2023 Late-breaking Work, Demos and Doctoral Consortium co-located with the 1st World Conference on eXplainable Artificial Intelligence (xAI-2023), Lissabon, 2023.","apa":"Liedeker, F., &#38; Cimiano, P. (2023). <i>A Prototype of an Interactive Clinical Decision Support System with Counterfactual Explanations</i>. xAI-2023 Late-breaking Work, Demos and Doctoral Consortium co-located with the 1st World Conference on eXplainable Artificial Intelligence (xAI-2023), Lissabon.","chicago":"Liedeker, Felix, and Philipp Cimiano. “A Prototype of an Interactive Clinical Decision Support System with Counterfactual Explanations,” 2023.","short":"F. Liedeker, P. Cimiano, in: 2023.","mla":"Liedeker, Felix, and Philipp Cimiano. <i>A Prototype of an Interactive Clinical Decision Support System with Counterfactual Explanations</i>. 2023.","bibtex":"@inproceedings{Liedeker_Cimiano_2023, title={A Prototype of an Interactive Clinical Decision Support System with Counterfactual Explanations}, author={Liedeker, Felix and Cimiano, Philipp}, year={2023} }","ama":"Liedeker F, Cimiano P. A Prototype of an Interactive Clinical Decision Support System with Counterfactual Explanations. In: ; 2023."},"abstract":[{"lang":"eng","text":"We describe a prototype of a Clinical Decision Support System (CDSS) that provides (counterfactual) explanations to support accurate medical diagnosis. The prototype is based on an inherently interpretable Bayesian network (BN). Our research aims to investigate which explanations are most useful for medical experts and whether co-constructing explanations can foster trust and acceptance of CDSS."}],"project":[{"name":"TRR 318 - C5: TRR 318 - Subproject C5","_id":"128"}],"_id":"56477","language":[{"iso":"eng"}],"user_id":"93275","status":"public","title":"A Prototype of an Interactive Clinical Decision Support System with Counterfactual Explanations","year":"2023","author":[{"full_name":"Liedeker, Felix","last_name":"Liedeker","first_name":"Felix","id":"93275"},{"last_name":"Cimiano","first_name":"Philipp","full_name":"Cimiano, Philipp"}],"conference":{"end_date":"2023-07-28","name":"xAI-2023 Late-breaking Work, Demos and Doctoral Consortium co-located with the 1st World Conference on eXplainable Artificial Intelligence (xAI-2023)","start_date":"2023-07-26","location":"Lissabon"},"date_updated":"2024-10-09T15:04:53Z"},{"user_id":"93275","_id":"56478","language":[{"iso":"eng"}],"date_updated":"2024-10-09T15:06:47Z","author":[{"first_name":"Felix","last_name":"Liedeker","full_name":"Liedeker, Felix","id":"93275"},{"first_name":"Philipp","last_name":"Cimiano","full_name":"Cimiano, Philipp"}],"conference":{"end_date":"2023-03-10","location":"Breckenridge, CO, USA ","start_date":"2023-03-07","name":"1st International Conference on Artificial Intelligence in Epilepsy and Neurological Disorders"},"status":"public","year":"2023","title":"Dynamic Feature Selection in AI-based Diagnostic Decision Support for Epilepsy","department":[{"_id":"660"}],"type":"conference_abstract","date_created":"2024-10-09T14:53:45Z","project":[{"_id":"128","name":"TRR 318 - C5: TRR 318 - Subproject C5"}],"citation":{"short":"F. Liedeker, P. Cimiano, in: 2023.","chicago":"Liedeker, Felix, and Philipp Cimiano. “Dynamic Feature Selection in AI-Based Diagnostic Decision Support for Epilepsy,” 2023.","ieee":"F. Liedeker and P. Cimiano, “Dynamic Feature Selection in AI-based Diagnostic Decision Support for Epilepsy,” presented at the 1st International Conference on Artificial Intelligence in Epilepsy and Neurological Disorders, Breckenridge, CO, USA , 2023.","apa":"Liedeker, F., &#38; Cimiano, P. (2023). <i>Dynamic Feature Selection in AI-based Diagnostic Decision Support for Epilepsy</i>. 1st International Conference on Artificial Intelligence in Epilepsy and Neurological Disorders, Breckenridge, CO, USA .","bibtex":"@inproceedings{Liedeker_Cimiano_2023, title={Dynamic Feature Selection in AI-based Diagnostic Decision Support for Epilepsy}, author={Liedeker, Felix and Cimiano, Philipp}, year={2023} }","ama":"Liedeker F, Cimiano P. Dynamic Feature Selection in AI-based Diagnostic Decision Support for Epilepsy. In: ; 2023.","mla":"Liedeker, Felix, and Philipp Cimiano. <i>Dynamic Feature Selection in AI-Based Diagnostic Decision Support for Epilepsy</i>. 2023."}},{"citation":{"ieee":"M. Gräler, <i>Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse</i>, vol. 417. Verlagsschriftenreihe des Heinz Nixdorf Instituts, 2023.","apa":"Gräler, M. (2023). <i>Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse</i> (Vol. 417). Verlagsschriftenreihe des Heinz Nixdorf Instituts. <a href=\"https://doi.org/10.17619/UNIPB/1-1894\">https://doi.org/10.17619/UNIPB/1-1894</a>","short":"M. Gräler, Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse, Verlagsschriftenreihe des Heinz Nixdorf Instituts, 2023.","chicago":"Gräler, Manuel. <i>Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse</i>. Vol. 417. Verlagsschriftenreihe des Heinz Nixdorf Instituts, 2023. <a href=\"https://doi.org/10.17619/UNIPB/1-1894\">https://doi.org/10.17619/UNIPB/1-1894</a>.","mla":"Gräler, Manuel. <i>Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse</i>. Verlagsschriftenreihe des Heinz Nixdorf Instituts, 2023, doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1894\">10.17619/UNIPB/1-1894</a>.","bibtex":"@book{Gräler_2023, title={Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse}, volume={417}, DOI={<a href=\"https://doi.org/10.17619/UNIPB/1-1894\">10.17619/UNIPB/1-1894</a>}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts}, author={Gräler, Manuel}, year={2023} }","ama":"Gräler M. <i>Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse</i>. Vol 417. Verlagsschriftenreihe des Heinz Nixdorf Instituts; 2023. doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1894\">10.17619/UNIPB/1-1894</a>"},"supervisor":[{"id":"552","full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar"}],"abstract":[{"lang":"eng","text":"Ein Trend in der Produktion sind individualisierte Produkte und damit eine höhere Variantenvielfalt, die idealerweise durch effiziente Produktionsprozesse hergestellt werden. Effizienz bedeutet in diesem Fall, dass die Produkte kostengünstig und bedarfsgerecht hergestellt werden. Der Trend geht hierbei auch in der Massenproduktion zu einer flexiblen Produktion, um das gebundene Kapital zu reduzieren und zeitnah auf Kundenwünsche reagieren zu können. Dies führt zu einem häufigeren Umrüsten der Werkzeuge in den Maschinen und somit zu einem immer häufigeren Einrichten der Prozesse.In dieser Arbeit wird eine Systematik für ein adaptives Einrichtassistenzsystem entwickelt, welches den Maschinenbediener beim Einrichten mithilfe eines definierten Vorgehens durch den Prozess leitet. Der Bediener wird dabei unterstützt die momentane Produktqualität zu bewerten und bekommt einen quantitativen Vorschlag zur Variation der Justagemöglichkeiten. So kann der Einrichtprozess zielgerichteter und fehlerfreier durchgeführt werden. Ermöglicht wird dies durch die Abbildung des notwendigen Expertenwissens in datengetriebenen Modellen. Mithilfe des so abgebildeten Expertenwissens werden optimierte Einstellungen berechnet und am Werkzeug eingestellt. Es ist nicht davon auszugehen, dass das virtualisierte Expertenwissen die Realität allumfassend abbilden und alle akuten Umwelteinflüsse messtechnisch ermittelt werden können. Etwaige Abweichungen der Produktqualität werden direkt in der entwickelten Optimierung und bei Bedarf mithilfe der vorgeschlagenen Kompensationsstrategie eliminiert.Die Systematik wird anhand eines Folgeverbundprozesses validiert. Nach der Analyse des Prozesses werden die wesentlichen Komponenten für das System entwickelt und mithilfe von Versuchen und Simulationen die Funktionsfähigkeit erfolgreich nachgewiesen."},{"text":"A trend in production are individualized products and thus a higher number of variants, which are ideally produced by efficient production processes. In this case, efficiency means that the products are manufactured at low cost and in line with demand. This trend, flexible manufacturing, is also valid for mass production, in order to reduce tied up capital and still be able to react promptly to customer demands. This leads to more frequent retooling in the machines and thus also to an increasingly frequent setting up of the processes.In this thesis, a systematic for an adaptive set-up assistant is developed, which guides the machine operator through the process during setup. The machine operator is supported in evaluating the current product quality and receives a quantitative proposal for the variation of the adjustment possibilities. Thus, the set-up process can be carried out in a more targeted and error-free manner. This is made possible by mapping the necessary expert knowledge in data-driven models. The expert knowledge is used to calculate optimized settings and adjust them on the tool. It cannot be assumed that virtualized expert knowledge will comprehensively map reality and that all acute environmental influences can be measured. Any deviations in product quality are directly eliminated in the developed optimization and, if necessary, with a proposed compensation strategy.The system is validated with a progressive tool. After analyzing the process, the essential components for the system are developed and their functionality is successfully demonstrated by means of tests and simulations.","lang":"eng"}],"date_created":"2024-11-07T09:15:33Z","type":"dissertation","department":[{"_id":"153"},{"_id":"241"}],"title":"Entwicklung adaptiver Einrichtassistenzsysteme für Produktionsprozesse","status":"public","year":"2023","author":[{"last_name":"Gräler","first_name":"Manuel","full_name":"Gräler, Manuel"}],"publication_status":"published","date_updated":"2024-11-07T11:41:58Z","intvolume":"       417","language":[{"iso":"ger"}],"_id":"56937","publisher":"Verlagsschriftenreihe des Heinz Nixdorf Instituts","user_id":"82875","doi":"10.17619/UNIPB/1-1894","volume":417},{"status":"public","year":"2023","title":"SNAPE: A Sequential Non-Stationary Decision Process Model for Adaptive Explanation Generation","conference":{"end_date":" 2023-02-24","name":"15th International Conference on Agents and Artificial Intelligence","start_date":"2023-02-22 ","location":"Lisbon"},"author":[{"full_name":"Robrecht, Amelie","first_name":"Amelie","orcid":"0000-0001-5622-8248","last_name":"Robrecht","id":"91982"},{"full_name":"Kopp, Stefan","last_name":"Kopp","first_name":"Stefan"}],"publication_identifier":{"isbn":["978-989-758-623-1"]},"date_updated":"2025-01-15T13:46:38Z","publication_status":"published","page":"48-58","_id":"51367","language":[{"iso":"eng"}],"publisher":"SCITEPRESS - Science and Technology Publications","doi":"10.5220/0011671300003393","user_id":"55908","publication":"Proceedings of the 15th International Conference on Agents and Artificial Intelligence","citation":{"short":"A. Robrecht, S. Kopp, in: Proceedings of the 15th International Conference on Agents and Artificial Intelligence, SCITEPRESS - Science and Technology Publications, 2023, pp. 48–58.","chicago":"Robrecht, Amelie, and Stefan Kopp. “SNAPE: A Sequential Non-Stationary Decision Process Model for Adaptive Explanation Generation.” In <i>Proceedings of the 15th International Conference on Agents and Artificial Intelligence</i>, 48–58. SCITEPRESS - Science and Technology Publications, 2023. <a href=\"https://doi.org/10.5220/0011671300003393\">https://doi.org/10.5220/0011671300003393</a>.","ieee":"A. Robrecht and S. Kopp, “SNAPE: A Sequential Non-Stationary Decision Process Model for Adaptive Explanation Generation,” in <i>Proceedings of the 15th International Conference on Agents and Artificial Intelligence</i>, Lisbon, 2023, pp. 48–58, doi: <a href=\"https://doi.org/10.5220/0011671300003393\">10.5220/0011671300003393</a>.","apa":"Robrecht, A., &#38; Kopp, S. (2023). SNAPE: A Sequential Non-Stationary Decision Process Model for Adaptive Explanation Generation. <i>Proceedings of the 15th International Conference on Agents and Artificial Intelligence</i>, 48–58. <a href=\"https://doi.org/10.5220/0011671300003393\">https://doi.org/10.5220/0011671300003393</a>","bibtex":"@inproceedings{Robrecht_Kopp_2023, title={SNAPE: A Sequential Non-Stationary Decision Process Model for Adaptive Explanation Generation}, DOI={<a href=\"https://doi.org/10.5220/0011671300003393\">10.5220/0011671300003393</a>}, booktitle={Proceedings of the 15th International Conference on Agents and Artificial Intelligence}, publisher={SCITEPRESS - Science and Technology Publications}, author={Robrecht, Amelie and Kopp, Stefan}, year={2023}, pages={48–58} }","ama":"Robrecht A, Kopp S. SNAPE: A Sequential Non-Stationary Decision Process Model for Adaptive Explanation Generation. In: <i>Proceedings of the 15th International Conference on Agents and Artificial Intelligence</i>. SCITEPRESS - Science and Technology Publications; 2023:48-58. doi:<a href=\"https://doi.org/10.5220/0011671300003393\">10.5220/0011671300003393</a>","mla":"Robrecht, Amelie, and Stefan Kopp. “SNAPE: A Sequential Non-Stationary Decision Process Model for Adaptive Explanation Generation.” <i>Proceedings of the 15th International Conference on Agents and Artificial Intelligence</i>, SCITEPRESS - Science and Technology Publications, 2023, pp. 48–58, doi:<a href=\"https://doi.org/10.5220/0011671300003393\">10.5220/0011671300003393</a>."},"project":[{"name":"TRR 318 - A01: TRR 318 - Adaptives Erklären (Teilprojekt A01)","_id":"111","grant_number":"438445824"},{"name":"TRR 318 - C: TRR 318 - Project Area C","_id":"117"}],"date_created":"2024-02-18T10:05:42Z","type":"conference","department":[{"_id":"660"}]},{"language":[{"iso":"eng"}],"_id":"55156","user_id":"55908","conference":{"name":"Semdial","location":"Maribor"},"author":[{"id":"56345","first_name":"Josephine Beryl","last_name":"Fisher","full_name":"Fisher, Josephine Beryl"},{"full_name":"Robrecht, Amelie","orcid":"0000-0001-5622-8248","last_name":"Robrecht","first_name":"Amelie","id":"91982"},{"full_name":"Kopp, Stefan","first_name":"Stefan","last_name":"Kopp"},{"id":"50352","full_name":"Rohlfing, Katharina J.","last_name":"Rohlfing","first_name":"Katharina J.","orcid":"0000-0002-5676-8233"}],"status":"public","year":"2023","title":"Exploring the Semantic Dialogue Patterns of Explanations – a Case Study of Game Explanations","date_updated":"2025-01-15T13:57:35Z","date_created":"2024-07-10T11:07:51Z","department":[{"_id":"660"}],"type":"conference","citation":{"chicago":"Fisher, Josephine Beryl, Amelie Robrecht, Stefan Kopp, and Katharina J. Rohlfing. “Exploring the Semantic Dialogue Patterns of Explanations – a Case Study of Game Explanations.” In <i>Proceedings of the 27th Workshop on the Semantics and Pragmatics of Dialogue </i>, 2023.","short":"J.B. Fisher, A. Robrecht, S. Kopp, K.J. Rohlfing, in: Proceedings of the 27th Workshop on the Semantics and Pragmatics of Dialogue , 2023.","ieee":"J. B. Fisher, A. Robrecht, S. Kopp, and K. J. Rohlfing, “Exploring the Semantic Dialogue Patterns of Explanations – a Case Study of Game Explanations,” presented at the Semdial, Maribor, 2023.","apa":"Fisher, J. B., Robrecht, A., Kopp, S., &#38; Rohlfing, K. J. (2023). Exploring the Semantic Dialogue Patterns of Explanations – a Case Study of Game Explanations. <i>Proceedings of the 27th Workshop on the Semantics and Pragmatics of Dialogue </i>. Semdial, Maribor.","bibtex":"@inproceedings{Fisher_Robrecht_Kopp_Rohlfing_2023, title={Exploring the Semantic Dialogue Patterns of Explanations – a Case Study of Game Explanations}, booktitle={Proceedings of the 27th Workshop on the Semantics and Pragmatics of Dialogue }, author={Fisher, Josephine Beryl and Robrecht, Amelie and Kopp, Stefan and Rohlfing, Katharina J.}, year={2023} }","ama":"Fisher JB, Robrecht A, Kopp S, Rohlfing KJ. Exploring the Semantic Dialogue Patterns of Explanations – a Case Study of Game Explanations. In: <i>Proceedings of the 27th Workshop on the Semantics and Pragmatics of Dialogue </i>. ; 2023.","mla":"Fisher, Josephine Beryl, et al. “Exploring the Semantic Dialogue Patterns of Explanations – a Case Study of Game Explanations.” <i>Proceedings of the 27th Workshop on the Semantics and Pragmatics of Dialogue </i>, 2023."},"publication":"Proceedings of the 27th Workshop on the Semantics and Pragmatics of Dialogue ","project":[{"name":"TRR 318 - A01: TRR 318 - Adaptives Erklären (Teilprojekt A01)","_id":"111","grant_number":"438445824"}]},{"language":[{"iso":"eng"}],"main_file_link":[{"url":"https://pubs.acs.org/doi/10.1021/acs.nanolett.3c01817","open_access":"1"}],"doi":"https://doi.org/10.1021/acs.nanolett.3c01817","author":[{"first_name":"Stefan ","last_name":"Grisard","full_name":"Grisard, Stefan "},{"full_name":"Trifonov, Artur V. ","first_name":"Artur V. ","last_name":"Trifonov"},{"full_name":"Solovev, Ivan A. ","last_name":"Solovev","first_name":"Ivan A. "},{"full_name":"Yakovlev, Dmitri R. ","first_name":"Dmitri R. ","last_name":"Yakovlev"},{"first_name":"Oleh ","last_name":"Hordiichuk","full_name":"Hordiichuk, Oleh "},{"last_name":"Kovalenko","first_name":"Maksym V. ","full_name":"Kovalenko, Maksym V. "},{"last_name":"Bayer","first_name":"Manfred ","full_name":"Bayer, Manfred "},{"full_name":"Akimov, Ilya A. ","first_name":"Ilya A. ","last_name":"Akimov"}],"year":"2023","title":"Long-Lived Exciton Coherence in Mixed-Halide Perovskite Crystals","intvolume":"        23","date_updated":"2025-01-16T15:31:44Z","publication_status":"published","date_created":"2025-01-16T15:31:29Z","department":[{"_id":"429"}],"type":"journal_article","publication":"Nano Letters","issue":"16","extern":"1","_id":"58222","volume":23,"user_id":"94792","status":"public","oa":"1","citation":{"ieee":"S. Grisard <i>et al.</i>, “Long-Lived Exciton Coherence in Mixed-Halide Perovskite Crystals,” <i>Nano Letters</i>, vol. 23, no. 16, 2023, doi: <a href=\"https://doi.org/10.1021/acs.nanolett.3c01817\">https://doi.org/10.1021/acs.nanolett.3c01817</a>.","apa":"Grisard, S., Trifonov, A. V., Solovev, I. A., Yakovlev, D. R., Hordiichuk, O., Kovalenko, M. V., Bayer, M., &#38; Akimov, I. A. (2023). Long-Lived Exciton Coherence in Mixed-Halide Perovskite Crystals. <i>Nano Letters</i>, <i>23</i>(16). <a href=\"https://doi.org/10.1021/acs.nanolett.3c01817\">https://doi.org/10.1021/acs.nanolett.3c01817</a>","chicago":"Grisard, Stefan , Artur V.  Trifonov, Ivan A.  Solovev, Dmitri R.  Yakovlev, Oleh  Hordiichuk, Maksym V.  Kovalenko, Manfred  Bayer, and Ilya A.  Akimov. “Long-Lived Exciton Coherence in Mixed-Halide Perovskite Crystals.” <i>Nano Letters</i> 23, no. 16 (2023). <a href=\"https://doi.org/10.1021/acs.nanolett.3c01817\">https://doi.org/10.1021/acs.nanolett.3c01817</a>.","short":"S. Grisard, A.V. Trifonov, I.A. Solovev, D.R. Yakovlev, O. Hordiichuk, M.V. Kovalenko, M. Bayer, I.A. Akimov, Nano Letters 23 (2023).","mla":"Grisard, Stefan, et al. “Long-Lived Exciton Coherence in Mixed-Halide Perovskite Crystals.” <i>Nano Letters</i>, vol. 23, no. 16, 2023, doi:<a href=\"https://doi.org/10.1021/acs.nanolett.3c01817\">https://doi.org/10.1021/acs.nanolett.3c01817</a>.","bibtex":"@article{Grisard_Trifonov_Solovev_Yakovlev_Hordiichuk_Kovalenko_Bayer_Akimov_2023, title={Long-Lived Exciton Coherence in Mixed-Halide Perovskite Crystals}, volume={23}, DOI={<a href=\"https://doi.org/10.1021/acs.nanolett.3c01817\">https://doi.org/10.1021/acs.nanolett.3c01817</a>}, number={16}, journal={Nano Letters}, author={Grisard, Stefan  and Trifonov, Artur V.  and Solovev, Ivan A.  and Yakovlev, Dmitri R.  and Hordiichuk, Oleh  and Kovalenko, Maksym V.  and Bayer, Manfred  and Akimov, Ilya A. }, year={2023} }","ama":"Grisard S, Trifonov AV, Solovev IA, et al. Long-Lived Exciton Coherence in Mixed-Halide Perovskite Crystals. <i>Nano Letters</i>. 2023;23(16). doi:<a href=\"https://doi.org/10.1021/acs.nanolett.3c01817\">https://doi.org/10.1021/acs.nanolett.3c01817</a>"},"project":[{"_id":"59","grant_number":"231447078","name":"TRR 142 - A02: TRR 142 - Nichtlineare Spektroskopie von Halbleiter-Nanostrukturen mit Quantenlicht (A02)"}]},{"citation":{"apa":"Fumagalli, F., Muschalik, M., Hüllermeier, E., &#38; Hammer, B. (2023). Incremental permutation feature importance (iPFI): towards online explanations on data streams. <i>Machine Learning</i>, <i>112</i>(12), 4863–4903. <a href=\"https://doi.org/10.1007/s10994-023-06385-y\">https://doi.org/10.1007/s10994-023-06385-y</a>","ieee":"F. Fumagalli, M. Muschalik, E. Hüllermeier, and B. Hammer, “Incremental permutation feature importance (iPFI): towards online explanations on data streams,” <i>Machine Learning</i>, vol. 112, no. 12, pp. 4863–4903, 2023, doi: <a href=\"https://doi.org/10.1007/s10994-023-06385-y\">10.1007/s10994-023-06385-y</a>.","short":"F. Fumagalli, M. Muschalik, E. Hüllermeier, B. Hammer, Machine Learning 112 (2023) 4863–4903.","chicago":"Fumagalli, Fabian, Maximilian Muschalik, Eyke Hüllermeier, and Barbara Hammer. “Incremental Permutation Feature Importance (IPFI): Towards Online Explanations on Data Streams.” <i>Machine Learning</i> 112, no. 12 (2023): 4863–4903. <a href=\"https://doi.org/10.1007/s10994-023-06385-y\">https://doi.org/10.1007/s10994-023-06385-y</a>.","mla":"Fumagalli, Fabian, et al. “Incremental Permutation Feature Importance (IPFI): Towards Online Explanations on Data Streams.” <i>Machine Learning</i>, vol. 112, no. 12, Springer Science and Business Media LLC, 2023, pp. 4863–903, doi:<a href=\"https://doi.org/10.1007/s10994-023-06385-y\">10.1007/s10994-023-06385-y</a>.","ama":"Fumagalli F, Muschalik M, Hüllermeier E, Hammer B. Incremental permutation feature importance (iPFI): towards online explanations on data streams. <i>Machine Learning</i>. 2023;112(12):4863-4903. doi:<a href=\"https://doi.org/10.1007/s10994-023-06385-y\">10.1007/s10994-023-06385-y</a>","bibtex":"@article{Fumagalli_Muschalik_Hüllermeier_Hammer_2023, title={Incremental permutation feature importance (iPFI): towards online explanations on data streams}, volume={112}, DOI={<a href=\"https://doi.org/10.1007/s10994-023-06385-y\">10.1007/s10994-023-06385-y</a>}, number={12}, journal={Machine Learning}, publisher={Springer Science and Business Media LLC}, author={Fumagalli, Fabian and Muschalik, Maximilian and Hüllermeier, Eyke and Hammer, Barbara}, year={2023}, pages={4863–4903} }"},"project":[{"name":"TRR 318 - C3: TRR 318 - Subproject C3","_id":"126"},{"name":"TRR 318 - C: TRR 318 - Project Area C","_id":"117"},{"name":"TRR 318: TRR 318 - Erklärbarkeit konstruieren","grant_number":"438445824","_id":"109"}],"_id":"50262","publisher":"Springer Science and Business Media LLC","page":"4863-4903","volume":112,"user_id":"93420","status":"public","date_created":"2024-01-05T21:52:28Z","department":[{"_id":"660"}],"keyword":["Artificial Intelligence","Software"],"type":"journal_article","issue":"12","publication":"Machine Learning","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>Explainable artificial intelligence has mainly focused on static learning scenarios so far. We are interested in dynamic scenarios where data is sampled progressively, and learning is done in an incremental rather than a batch mode. We seek efficient incremental algorithms for computing feature importance (FI). Permutation feature importance (PFI) is a well-established model-agnostic measure to obtain global FI based on feature marginalization of absent features. We propose an efficient, model-agnostic algorithm called iPFI to estimate this measure incrementally and under dynamic modeling conditions including concept drift. We prove theoretical guarantees on the approximation quality in terms of expectation and variance. To validate our theoretical findings and the efficacy of our approaches in incremental scenarios dealing with streaming data rather than traditional batch settings, we conduct multiple experimental studies on benchmark data with and without concept drift.</jats:p>","lang":"eng"}],"language":[{"iso":"eng"}],"doi":"10.1007/s10994-023-06385-y","author":[{"last_name":"Fumagalli","first_name":"Fabian","full_name":"Fumagalli, Fabian"},{"first_name":"Maximilian","last_name":"Muschalik","full_name":"Muschalik, Maximilian"},{"last_name":"Hüllermeier","first_name":"Eyke","full_name":"Hüllermeier, Eyke"},{"full_name":"Hammer, Barbara","last_name":"Hammer","first_name":"Barbara"}],"publication_identifier":{"issn":["0885-6125","1573-0565"]},"year":"2023","title":"Incremental permutation feature importance (iPFI): towards online explanations on data streams","intvolume":"       112","publication_status":"published","date_updated":"2025-01-16T16:20:12Z"}]