---
_id: '10014'
abstract:
- lang: eng
text: The cubic, tetragonal, and orthorhombic phase of potassium niobate (KNbO3)
are studied based on density-functional theory. Starting from the relaxed atomic
geometries, we analyze the influence of self-energy corrections on the electronic
band structure within the GW approximation. We find that quasiparticle shifts
widen the direct (indirect) band gap by 1.21 (1.44), 1.58 (1.55), and 1.67 (1.64)
eV for the cubic, tetragonal, and orthorhombic phase, respectively. By solving
the Bethe-Salpeter equation, we obtain the linear dielectric function with excitonic
and local-field effects, which turn out to be essential for good agreement with
experimental data. From our results, we extract an exciton binding energy of 0.6,
0.5, and 0.5 eV for the cubic, tetragonal, and orthorhombic phase, respectively.
Furthermore, we investigate the nonlinear second-harmonic generation (SHG) both
theoretically and experimentally. The frequency-dependent second-order polarization
tensor of orthorhombic KNbO3 is measured for incoming photon energies between
1.2 and 1.6 eV. In addition, calculations within the independent-(quasi)particle
approximation are performed for the tetragonal and orthorhombic phase. The novel
experimental data are in excellent agreement with the quasiparticle calculations
and resolve persistent discrepancies between earlier experimental measurements
and ab initio results reported in the literature.
article_number: '054401'
article_type: original
author:
- first_name: Falko
full_name: Schmidt, Falko
id: '35251'
last_name: Schmidt
orcid: 0000-0002-5071-5528
- first_name: Arthur
full_name: Riefer, Arthur
last_name: Riefer
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
- first_name: Arno
full_name: Schindlmayr, Arno
id: '458'
last_name: Schindlmayr
orcid: 0000-0002-4855-071X
- first_name: Mirco
full_name: Imlau, Mirco
last_name: Imlau
- first_name: Florian
full_name: Dobener, Florian
last_name: Dobener
- first_name: Nils
full_name: Mengel, Nils
last_name: Mengel
- first_name: Sangam
full_name: Chatterjee, Sangam
last_name: Chatterjee
- first_name: Simone
full_name: Sanna, Simone
last_name: Sanna
citation:
ama: Schmidt F, Riefer A, Schmidt WG, et al. Quasiparticle and excitonic effects
in the optical response of KNbO3. Physical Review Materials. 2019;3(5).
doi:10.1103/PhysRevMaterials.3.054401
apa: Schmidt, F., Riefer, A., Schmidt, W. G., Schindlmayr, A., Imlau, M., Dobener,
F., Mengel, N., Chatterjee, S., & Sanna, S. (2019). Quasiparticle and excitonic
effects in the optical response of KNbO3. Physical Review Materials, 3(5),
Article 054401. https://doi.org/10.1103/PhysRevMaterials.3.054401
bibtex: '@article{Schmidt_Riefer_Schmidt_Schindlmayr_Imlau_Dobener_Mengel_Chatterjee_Sanna_2019,
title={Quasiparticle and excitonic effects in the optical response of KNbO3},
volume={3}, DOI={10.1103/PhysRevMaterials.3.054401},
number={5054401}, journal={Physical Review Materials}, publisher={American Physical
Society}, author={Schmidt, Falko and Riefer, Arthur and Schmidt, Wolf Gero and
Schindlmayr, Arno and Imlau, Mirco and Dobener, Florian and Mengel, Nils and Chatterjee,
Sangam and Sanna, Simone}, year={2019} }'
chicago: Schmidt, Falko, Arthur Riefer, Wolf Gero Schmidt, Arno Schindlmayr, Mirco
Imlau, Florian Dobener, Nils Mengel, Sangam Chatterjee, and Simone Sanna. “Quasiparticle
and Excitonic Effects in the Optical Response of KNbO3.” Physical Review Materials
3, no. 5 (2019). https://doi.org/10.1103/PhysRevMaterials.3.054401.
ieee: 'F. Schmidt et al., “Quasiparticle and excitonic effects in the optical
response of KNbO3,” Physical Review Materials, vol. 3, no. 5, Art. no.
054401, 2019, doi: 10.1103/PhysRevMaterials.3.054401.'
mla: Schmidt, Falko, et al. “Quasiparticle and Excitonic Effects in the Optical
Response of KNbO3.” Physical Review Materials, vol. 3, no. 5, 054401, American
Physical Society, 2019, doi:10.1103/PhysRevMaterials.3.054401.
short: F. Schmidt, A. Riefer, W.G. Schmidt, A. Schindlmayr, M. Imlau, F. Dobener,
N. Mengel, S. Chatterjee, S. Sanna, Physical Review Materials 3 (2019).
date_created: 2019-05-29T06:55:29Z
date_updated: 2023-04-20T14:20:33Z
ddc:
- '530'
department:
- _id: '295'
- _id: '296'
- _id: '230'
- _id: '429'
- _id: '170'
- _id: '35'
doi: 10.1103/PhysRevMaterials.3.054401
external_id:
isi:
- '000467044000003'
file:
- access_level: open_access
content_type: application/pdf
creator: schindlm
date_created: 2020-08-27T19:05:54Z
date_updated: 2020-08-30T14:34:33Z
description: © 2019 American Physical Society
file_id: '18465'
file_name: PhysRevMaterials.3.054401.pdf
file_size: 1949504
relation: main_file
title: Quasiparticle and excitonic effects in the optical response of KNbO3
file_date_updated: 2020-08-30T14:34:33Z
has_accepted_license: '1'
intvolume: ' 3'
isi: '1'
issue: '5'
language:
- iso: eng
oa: '1'
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '53'
name: TRR 142
- _id: '55'
name: TRR 142 - Project Area B
- _id: '69'
name: TRR 142 - Subproject B4
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Physical Review Materials
publication_identifier:
eissn:
- 2475-9953
publication_status: published
publisher: American Physical Society
quality_controlled: '1'
status: public
title: Quasiparticle and excitonic effects in the optical response of KNbO3
type: journal_article
user_id: '16199'
volume: 3
year: '2019'
...
---
_id: '37288'
abstract:
- lang: eng
text: An integrated chip with quantum state generation, active polarization
manipulation, and precise time control is demonstrated.
author:
- first_name: Kai-Hong
full_name: Luo, Kai-Hong
id: '36389'
last_name: Luo
orcid: 0000-0003-1008-4976
- first_name: Sebastian
full_name: Brauner, Sebastian
id: '38161'
last_name: Brauner
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Polina
full_name: Sharapova, Polina
id: '60286'
last_name: Sharapova
- first_name: Raimund
full_name: Ricken, Raimund
last_name: Ricken
- first_name: Torsten
full_name: Meier, Torsten
id: '344'
last_name: Meier
orcid: 0000-0001-8864-2072
- first_name: Harald
full_name: Herrmann, Harald
id: '216'
last_name: Herrmann
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
citation:
ama: Luo K-H, Brauner S, Eigner C, et al. Nonlinear integrated quantum electro-optic
circuits. Science Advances. 2019;5(1). doi:10.1126/sciadv.aat1451
apa: Luo, K.-H., Brauner, S., Eigner, C., Sharapova, P., Ricken, R., Meier, T.,
Herrmann, H., & Silberhorn, C. (2019). Nonlinear integrated quantum electro-optic
circuits. Science Advances, 5(1). https://doi.org/10.1126/sciadv.aat1451
bibtex: '@article{Luo_Brauner_Eigner_Sharapova_Ricken_Meier_Herrmann_Silberhorn_2019,
title={Nonlinear integrated quantum electro-optic circuits}, volume={5}, DOI={10.1126/sciadv.aat1451}, number={1},
journal={Science Advances}, publisher={American Association for the Advancement
of Science (AAAS)}, author={Luo, Kai-Hong and Brauner, Sebastian and Eigner, Christof
and Sharapova, Polina and Ricken, Raimund and Meier, Torsten and Herrmann, Harald
and Silberhorn, Christine}, year={2019} }'
chicago: Luo, Kai-Hong, Sebastian Brauner, Christof Eigner, Polina Sharapova, Raimund
Ricken, Torsten Meier, Harald Herrmann, and Christine Silberhorn. “Nonlinear Integrated
Quantum Electro-Optic Circuits.” Science Advances 5, no. 1 (2019). https://doi.org/10.1126/sciadv.aat1451.
ieee: 'K.-H. Luo et al., “Nonlinear integrated quantum electro-optic circuits,”
Science Advances, vol. 5, no. 1, 2019, doi: 10.1126/sciadv.aat1451.'
mla: Luo, Kai-Hong, et al. “Nonlinear Integrated Quantum Electro-Optic Circuits.”
Science Advances, vol. 5, no. 1, American Association for the Advancement
of Science (AAAS), 2019, doi:10.1126/sciadv.aat1451.
short: K.-H. Luo, S. Brauner, C. Eigner, P. Sharapova, R. Ricken, T. Meier, H. Herrmann,
C. Silberhorn, Science Advances 5 (2019).
date_created: 2023-01-18T10:35:19Z
date_updated: 2023-04-21T11:25:39Z
department:
- _id: '15'
- _id: '569'
- _id: '170'
- _id: '293'
- _id: '230'
- _id: '623'
- _id: '429'
- _id: '35'
doi: 10.1126/sciadv.aat1451
intvolume: ' 5'
issue: '1'
keyword:
- Multidisciplinary
language:
- iso: eng
project:
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '56'
name: 'TRR 142 - C: TRR 142 - Project Area C'
- _id: '72'
name: 'TRR 142 - C2: TRR 142 - Subproject C2'
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Science Advances
publication_identifier:
issn:
- 2375-2548
publication_status: published
publisher: American Association for the Advancement of Science (AAAS)
status: public
title: Nonlinear integrated quantum electro-optic circuits
type: journal_article
user_id: '16199'
volume: 5
year: '2019'
...
---
_id: '13284'
article_number: '125301'
author:
- first_name: Wolf-Rüdiger
full_name: Hannes, Wolf-Rüdiger
id: '66789'
last_name: Hannes
orcid: https://orcid.org/0000-0003-1210-4838
- first_name: Torsten
full_name: Meier, Torsten
id: '344'
last_name: Meier
orcid: 0000-0001-8864-2072
citation:
ama: Hannes W-R, Meier T. Higher-order contributions and nonperturbative effects
in the nondegenerate nonlinear optical absorption of semiconductors using a two-band
model. Physical Review B. 2019;99(12). doi:10.1103/physrevb.99.125301
apa: Hannes, W.-R., & Meier, T. (2019). Higher-order contributions and nonperturbative
effects in the nondegenerate nonlinear optical absorption of semiconductors using
a two-band model. Physical Review B, 99(12), Article 125301. https://doi.org/10.1103/physrevb.99.125301
bibtex: '@article{Hannes_Meier_2019, title={Higher-order contributions and nonperturbative
effects in the nondegenerate nonlinear optical absorption of semiconductors using
a two-band model}, volume={99}, DOI={10.1103/physrevb.99.125301},
number={12125301}, journal={Physical Review B}, author={Hannes, Wolf-Rüdiger and
Meier, Torsten}, year={2019} }'
chicago: Hannes, Wolf-Rüdiger, and Torsten Meier. “Higher-Order Contributions and
Nonperturbative Effects in the Nondegenerate Nonlinear Optical Absorption of Semiconductors
Using a Two-Band Model.” Physical Review B 99, no. 12 (2019). https://doi.org/10.1103/physrevb.99.125301.
ieee: 'W.-R. Hannes and T. Meier, “Higher-order contributions and nonperturbative
effects in the nondegenerate nonlinear optical absorption of semiconductors using
a two-band model,” Physical Review B, vol. 99, no. 12, Art. no. 125301,
2019, doi: 10.1103/physrevb.99.125301.'
mla: Hannes, Wolf-Rüdiger, and Torsten Meier. “Higher-Order Contributions and Nonperturbative
Effects in the Nondegenerate Nonlinear Optical Absorption of Semiconductors Using
a Two-Band Model.” Physical Review B, vol. 99, no. 12, 125301, 2019, doi:10.1103/physrevb.99.125301.
short: W.-R. Hannes, T. Meier, Physical Review B 99 (2019).
date_created: 2019-09-18T14:18:05Z
date_updated: 2023-04-21T11:26:19Z
department:
- _id: '15'
- _id: '170'
- _id: '293'
- _id: '230'
- _id: '429'
- _id: '35'
doi: 10.1103/physrevb.99.125301
intvolume: ' 99'
issue: '12'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '64'
name: TRR 142 - Subproject A7
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '54'
name: 'TRR 142 - A: TRR 142 - Project Area A'
publication: Physical Review B
publication_identifier:
issn:
- 2469-9950
- 2469-9969
publication_status: published
status: public
title: Higher-order contributions and nonperturbative effects in the nondegenerate
nonlinear optical absorption of semiconductors using a two-band model
type: journal_article
user_id: '16199'
volume: 99
year: '2019'
...
---
_id: '13365'
abstract:
- lang: eng
text: 'The KTiOPO4 (KTP) band structure and dielectric function are calculated on
various levels of theory starting from density-functional calculations. Within
the independent-particle approximation an electronic transport gap of 2.97 eV
is obtained that widens to about 5.23 eV when quasiparticle effects are included
using the GW approximation. The optical response is shown to be strongly anisotropic
due to (i) the slight asymmetry of the TiO6 octahedra in the (001) plane and (ii)
their anisotropic distribution along the [001] and [100] directions. In addition,
excitonic effects are very important: The solution of the Bethe–Salpeter equation
indicates exciton binding energies of the order of 1.5 eV. Calculations that include
both quasiparticle and excitonic effects are in good agreement with the measured
reflectivity.'
article_type: original
author:
- first_name: Sergej
full_name: Neufeld, Sergej
id: '23261'
last_name: Neufeld
- first_name: Adriana
full_name: Bocchini, Adriana
id: '58349'
last_name: Bocchini
orcid: https://orcid.org/0000-0002-2134-3075
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Arno
full_name: Schindlmayr, Arno
id: '458'
last_name: Schindlmayr
orcid: 0000-0002-4855-071X
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
citation:
ama: 'Neufeld S, Bocchini A, Gerstmann U, Schindlmayr A, Schmidt WG. Potassium titanyl
phosphate (KTP) quasiparticle energies and optical response. Journal of Physics:
Materials. 2019;2:045003. doi:10.1088/2515-7639/ab29ba'
apa: 'Neufeld, S., Bocchini, A., Gerstmann, U., Schindlmayr, A., & Schmidt,
W. G. (2019). Potassium titanyl phosphate (KTP) quasiparticle energies and optical
response. Journal of Physics: Materials, 2, 045003. https://doi.org/10.1088/2515-7639/ab29ba'
bibtex: '@article{Neufeld_Bocchini_Gerstmann_Schindlmayr_Schmidt_2019, title={Potassium
titanyl phosphate (KTP) quasiparticle energies and optical response}, volume={2},
DOI={10.1088/2515-7639/ab29ba},
journal={Journal of Physics: Materials}, publisher={IOP Publishing}, author={Neufeld,
Sergej and Bocchini, Adriana and Gerstmann, Uwe and Schindlmayr, Arno and Schmidt,
Wolf Gero}, year={2019}, pages={045003} }'
chicago: 'Neufeld, Sergej, Adriana Bocchini, Uwe Gerstmann, Arno Schindlmayr, and
Wolf Gero Schmidt. “Potassium Titanyl Phosphate (KTP) Quasiparticle Energies and
Optical Response.” Journal of Physics: Materials 2 (2019): 045003. https://doi.org/10.1088/2515-7639/ab29ba.'
ieee: 'S. Neufeld, A. Bocchini, U. Gerstmann, A. Schindlmayr, and W. G. Schmidt,
“Potassium titanyl phosphate (KTP) quasiparticle energies and optical response,”
Journal of Physics: Materials, vol. 2, p. 045003, 2019, doi: 10.1088/2515-7639/ab29ba.'
mla: 'Neufeld, Sergej, et al. “Potassium Titanyl Phosphate (KTP) Quasiparticle Energies
and Optical Response.” Journal of Physics: Materials, vol. 2, IOP Publishing,
2019, p. 045003, doi:10.1088/2515-7639/ab29ba.'
short: 'S. Neufeld, A. Bocchini, U. Gerstmann, A. Schindlmayr, W.G. Schmidt, Journal
of Physics: Materials 2 (2019) 045003.'
date_created: 2019-09-19T14:34:16Z
date_updated: 2023-04-21T11:36:12Z
ddc:
- '530'
department:
- _id: '296'
- _id: '295'
- _id: '230'
- _id: '429'
- _id: '170'
- _id: '35'
doi: 10.1088/2515-7639/ab29ba
external_id:
isi:
- '000560410300003'
file:
- access_level: open_access
content_type: application/pdf
creator: schindlm
date_created: 2020-08-28T09:07:18Z
date_updated: 2020-08-30T14:29:27Z
description: Creative Commons Attribution 3.0 Unported Public License (CC BY 3.0)
file_id: '18535'
file_name: Neufeld_2019_J._Phys._Mater._2_045003.pdf
file_size: 1481174
relation: main_file
title: Potassium titanyl phosphate (KTP) quasiparticle energies and optical response
file_date_updated: 2020-08-30T14:29:27Z
has_accepted_license: '1'
intvolume: ' 2'
isi: '1'
language:
- iso: eng
oa: '1'
page: '045003'
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '53'
name: TRR 142
- _id: '55'
name: TRR 142 - Project Area B
- _id: '69'
name: TRR 142 - Subproject B4
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: 'Journal of Physics: Materials'
publication_identifier:
eissn:
- 2515-7639
publication_status: published
publisher: IOP Publishing
quality_controlled: '1'
status: public
title: Potassium titanyl phosphate (KTP) quasiparticle energies and optical response
type: journal_article
user_id: '171'
volume: 2
year: '2019'
...
---
_id: '22445'
abstract:
- lang: ger
text: Am Beispiel des chinesisch-deutschen Kooperationsstudiengangs Maschinenbau
an der Chinesisch-Deutschen Technischen Fakultät in Qingdao (China) werden unter
Rückgriff auf unterschiedliche im Rahmen formativer Evaluation erhobener Datensätze
Möglichkeiten und Grenzen der Integration von Fach- und Sprachlernen sowie Optimierungsmöglichkeiten
der Unterstützung des studienvorbereitenden und -begleitenden (Fach-)Spracherwerbs
diskutiert.
author:
- first_name: Vera
full_name: Denzer, Vera
last_name: Denzer
- first_name: Andrea
full_name: Didier, Andrea
last_name: Didier
- first_name: Sandra
full_name: Drumm, Sandra
last_name: Drumm
- first_name: Dennis
full_name: Hambach, Dennis
id: '32850'
last_name: Hambach
- first_name: Marta
full_name: Kaplinska-Zajontz, Marta
last_name: Kaplinska-Zajontz
- first_name: Josef
full_name: Noeke, Josef
last_name: Noeke
- first_name: Julia
full_name: Settinieri, Julia
last_name: Settinieri
- first_name: Lin
full_name: Xi, Lin
last_name: Xi
- first_name: Hongyu
full_name: Zhu, Hongyu
last_name: Zhu
citation:
ama: Denzer V, Didier A, Drumm S, et al. Integration von Sprach- und Fachlernen
im Kontext chinesisch-deutscher Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums
an der Chinesisch-Deutschen Technischen Fakultät (CDTF, Qingdao/Paderborn). Informationen
Deutsch als Fremdsprache. 2019;46(1):178-199. doi:10.1515/infodaf-2019-0013
apa: Denzer, V., Didier, A., Drumm, S., Hambach, D., Kaplinska-Zajontz, M., Noeke,
J., Settinieri, J., Xi, L., & Zhu, H. (2019). Integration von Sprach- und
Fachlernen im Kontext chinesisch-deutscher Kooperationsstudiengänge am Beispiel
des Maschinenbaustudiums an der Chinesisch-Deutschen Technischen Fakultät (CDTF,
Qingdao/Paderborn). Informationen Deutsch als Fremdsprache, 46(1),
178–199. https://doi.org/10.1515/infodaf-2019-0013
bibtex: '@article{Denzer_Didier_Drumm_Hambach_Kaplinska-Zajontz_Noeke_Settinieri_Xi_Zhu_2019,
title={Integration von Sprach- und Fachlernen im Kontext chinesisch-deutscher
Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums an der Chinesisch-Deutschen
Technischen Fakultät (CDTF, Qingdao/Paderborn)}, volume={46}, DOI={10.1515/infodaf-2019-0013},
number={1}, journal={Informationen Deutsch als Fremdsprache}, publisher={De Gruyter
Mouton}, author={Denzer, Vera and Didier, Andrea and Drumm, Sandra and Hambach,
Dennis and Kaplinska-Zajontz, Marta and Noeke, Josef and Settinieri, Julia and
Xi, Lin and Zhu, Hongyu}, year={2019}, pages={178–199} }'
chicago: 'Denzer, Vera, Andrea Didier, Sandra Drumm, Dennis Hambach, Marta Kaplinska-Zajontz,
Josef Noeke, Julia Settinieri, Lin Xi, and Hongyu Zhu. “Integration von Sprach-
und Fachlernen im Kontext chinesisch-deutscher Kooperationsstudiengänge am Beispiel
des Maschinenbaustudiums an der Chinesisch-Deutschen Technischen Fakultät (CDTF,
Qingdao/Paderborn).” Informationen Deutsch als Fremdsprache 46, no. 1 (2019):
178–99. https://doi.org/10.1515/infodaf-2019-0013.'
ieee: 'V. Denzer et al., “Integration von Sprach- und Fachlernen im Kontext
chinesisch-deutscher Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums
an der Chinesisch-Deutschen Technischen Fakultät (CDTF, Qingdao/Paderborn),” Informationen
Deutsch als Fremdsprache, vol. 46, no. 1, pp. 178–199, 2019, doi: 10.1515/infodaf-2019-0013.'
mla: Denzer, Vera, et al. “Integration von Sprach- und Fachlernen im Kontext chinesisch-deutscher
Kooperationsstudiengänge am Beispiel des Maschinenbaustudiums an der Chinesisch-Deutschen
Technischen Fakultät (CDTF, Qingdao/Paderborn).” Informationen Deutsch als
Fremdsprache, vol. 46, no. 1, De Gruyter Mouton, 2019, pp. 178–99, doi:10.1515/infodaf-2019-0013.
short: V. Denzer, A. Didier, S. Drumm, D. Hambach, M. Kaplinska-Zajontz, J. Noeke,
J. Settinieri, L. Xi, H. Zhu, Informationen Deutsch als Fremdsprache 46 (2019)
178–199.
date_created: 2021-06-15T11:10:19Z
date_updated: 2023-04-27T09:02:12Z
department:
- _id: '9'
- _id: '146'
- _id: '398'
doi: 10.1515/infodaf-2019-0013
intvolume: ' 46'
issue: '1'
language:
- iso: ger
page: 178-199
publication: Informationen Deutsch als Fremdsprache
publication_identifier:
isbn:
- 2511-0853
publication_status: published
publisher: De Gruyter Mouton
quality_controlled: '1'
status: public
title: Integration von Sprach- und Fachlernen im Kontext chinesisch-deutscher Kooperationsstudiengänge
am Beispiel des Maschinenbaustudiums an der Chinesisch-Deutschen Technischen Fakultät
(CDTF, Qingdao/Paderborn)
type: journal_article
user_id: '32850'
volume: 46
year: '2019'
...
---
_id: '22887'
author:
- first_name: J.
full_name: Vondran, J.
last_name: Vondran
- first_name: F.
full_name: Spitzer, F.
last_name: Spitzer
- first_name: M.
full_name: Bayer, M.
last_name: Bayer
- first_name: I. A.
full_name: Akimov, I. A.
last_name: Akimov
- first_name: Alexander
full_name: Trautmann, Alexander
id: '38163'
last_name: Trautmann
- first_name: Matthias
full_name: Reichelt, Matthias
id: '138'
last_name: Reichelt
- first_name: Cedrik
full_name: Meier, Cedrik
id: '20798'
last_name: Meier
orcid: https://orcid.org/0000-0002-3787-3572
- first_name: N.
full_name: Weber, N.
last_name: Weber
- first_name: Torsten
full_name: Meier, Torsten
id: '344'
last_name: Meier
orcid: 0000-0001-8864-2072
- first_name: R.
full_name: André, R.
last_name: André
- first_name: H.
full_name: Mariette, H.
last_name: Mariette
citation:
ama: Vondran J, Spitzer F, Bayer M, et al. Spatially asymmetric transients of propagating
exciton-polariton modes in a planar CdZnTe/CdMgTe guiding structure. Physical
Review B. 2019;100(15):155308. doi:10.1103/physrevb.100.155308
apa: Vondran, J., Spitzer, F., Bayer, M., Akimov, I. A., Trautmann, A., Reichelt,
M., Meier, C., Weber, N., Meier, T., André, R., & Mariette, H. (2019). Spatially
asymmetric transients of propagating exciton-polariton modes in a planar CdZnTe/CdMgTe
guiding structure. Physical Review B, 100(15), 155308. https://doi.org/10.1103/physrevb.100.155308
bibtex: '@article{Vondran_Spitzer_Bayer_Akimov_Trautmann_Reichelt_Meier_Weber_Meier_André_et
al._2019, title={Spatially asymmetric transients of propagating exciton-polariton
modes in a planar CdZnTe/CdMgTe guiding structure}, volume={100}, DOI={10.1103/physrevb.100.155308},
number={15}, journal={Physical Review B}, author={Vondran, J. and Spitzer, F.
and Bayer, M. and Akimov, I. A. and Trautmann, Alexander and Reichelt, Matthias
and Meier, Cedrik and Weber, N. and Meier, Torsten and André, R. and et al.},
year={2019}, pages={155308} }'
chicago: 'Vondran, J., F. Spitzer, M. Bayer, I. A. Akimov, Alexander Trautmann,
Matthias Reichelt, Cedrik Meier, et al. “Spatially Asymmetric Transients of Propagating
Exciton-Polariton Modes in a Planar CdZnTe/CdMgTe Guiding Structure.” Physical
Review B 100, no. 15 (2019): 155308. https://doi.org/10.1103/physrevb.100.155308.'
ieee: 'J. Vondran et al., “Spatially asymmetric transients of propagating
exciton-polariton modes in a planar CdZnTe/CdMgTe guiding structure,” Physical
Review B, vol. 100, no. 15, p. 155308, 2019, doi: 10.1103/physrevb.100.155308.'
mla: Vondran, J., et al. “Spatially Asymmetric Transients of Propagating Exciton-Polariton
Modes in a Planar CdZnTe/CdMgTe Guiding Structure.” Physical Review B,
vol. 100, no. 15, 2019, p. 155308, doi:10.1103/physrevb.100.155308.
short: J. Vondran, F. Spitzer, M. Bayer, I.A. Akimov, A. Trautmann, M. Reichelt,
C. Meier, N. Weber, T. Meier, R. André, H. Mariette, Physical Review B 100 (2019)
155308.
date_created: 2021-07-29T08:13:23Z
date_updated: 2023-04-21T11:30:46Z
department:
- _id: '15'
- _id: '170'
- _id: '293'
- _id: '429'
- _id: '230'
- _id: '35'
doi: 10.1103/physrevb.100.155308
intvolume: ' 100'
issue: '15'
language:
- iso: eng
page: '155308'
project:
- _id: '53'
name: TRR 142
- _id: '54'
name: TRR 142 - Project Area A
- _id: '56'
name: TRR 142 - Project Area C
- _id: '55'
name: TRR 142 - Project Area B
- _id: '59'
name: TRR 142 - Subproject A2
- _id: '67'
name: TRR 142 - Subproject B2
- _id: '68'
name: TRR 142 - Subproject B3
- _id: '62'
name: TRR 142 - Subproject A5
- _id: '71'
name: TRR 142 - Subproject C1
publication: Physical Review B
publication_identifier:
issn:
- 2469-9950
- 2469-9969
publication_status: published
status: public
title: Spatially asymmetric transients of propagating exciton-polariton modes in a
planar CdZnTe/CdMgTe guiding structure
type: journal_article
user_id: '16199'
volume: 100
year: '2019'
...
---
_id: '22884'
abstract:
- lang: eng
text: "Measurement-induced nonclassical effects in a two-mode interferometer are\r\ninvestigated
theoretically using numerical simulations and analytical results.\r\nWe demonstrate
that for certain parameters measurements within the\r\ninterferometer lead to
the occurrence of two-mode squeezing. The results\r\nstrongly depend on the detection
probability, the phase inside the\r\ninterferometer, and the choice of the input
states. The appropriate parameters\r\nfor maximized squeezing are obtained. We
analyze the influence of losses and\r\nconfirm that the predicted effects are
within reach of current experimental\r\ntechniques."
author:
- first_name: Matvei
full_name: Riabinin, Matvei
last_name: Riabinin
- first_name: Polina
full_name: Sharapova, Polina
id: '60286'
last_name: Sharapova
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
- first_name: Torsten
full_name: Meier, Torsten
id: '344'
last_name: Meier
orcid: 0000-0001-8864-2072
citation:
ama: Riabinin M, Sharapova P, Bartley T, Meier T. Generating two-mode squeezing
with multimode measurement-induced nonlinearity. arXiv:191209097. Published
online 2019.
apa: Riabinin, M., Sharapova, P., Bartley, T., & Meier, T. (2019). Generating
two-mode squeezing with multimode measurement-induced nonlinearity. In arXiv:1912.09097.
bibtex: '@article{Riabinin_Sharapova_Bartley_Meier_2019, title={Generating two-mode
squeezing with multimode measurement-induced nonlinearity}, journal={arXiv:1912.09097},
author={Riabinin, Matvei and Sharapova, Polina and Bartley, Tim and Meier, Torsten},
year={2019} }'
chicago: Riabinin, Matvei, Polina Sharapova, Tim Bartley, and Torsten Meier. “Generating
Two-Mode Squeezing with Multimode Measurement-Induced Nonlinearity.” ArXiv:1912.09097,
2019.
ieee: M. Riabinin, P. Sharapova, T. Bartley, and T. Meier, “Generating two-mode
squeezing with multimode measurement-induced nonlinearity,” arXiv:1912.09097.
2019.
mla: Riabinin, Matvei, et al. “Generating Two-Mode Squeezing with Multimode Measurement-Induced
Nonlinearity.” ArXiv:1912.09097, 2019.
short: M. Riabinin, P. Sharapova, T. Bartley, T. Meier, ArXiv:1912.09097 (2019).
date_created: 2021-07-29T08:09:22Z
date_updated: 2023-04-21T11:28:10Z
department:
- _id: '15'
- _id: '569'
- _id: '170'
- _id: '293'
- _id: '482'
- _id: '230'
- _id: '429'
- _id: '35'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1088/2399-6528/abeec2
oa: '1'
project:
- _id: '53'
name: TRR 142
- _id: '56'
name: TRR 142 - Project Area C
- _id: '72'
name: TRR 142 - Subproject C2
- _id: '76'
name: TRR 142 - Subproject C6
publication: arXiv:1912.09097
status: public
title: Generating two-mode squeezing with multimode measurement-induced nonlinearity
type: preprint
user_id: '16199'
year: '2019'
...
---
_id: '13900'
author:
- first_name: Xiaohong
full_name: Song, Xiaohong
last_name: Song
- first_name: Ruixin
full_name: Zuo, Ruixin
last_name: Zuo
- first_name: Shidong
full_name: Yang, Shidong
last_name: Yang
- first_name: Pengcheng
full_name: Li, Pengcheng
last_name: Li
- first_name: Torsten
full_name: Meier, Torsten
id: '344'
last_name: Meier
orcid: 0000-0001-8864-2072
- first_name: Weifeng
full_name: Yang, Weifeng
last_name: Yang
citation:
ama: Song X, Zuo R, Yang S, Li P, Meier T, Yang W. Attosecond temporal confinement
of interband excitation by intraband motion. Optics Express. 2019;27(3):2225-2234.
doi:10.1364/oe.27.002225
apa: Song, X., Zuo, R., Yang, S., Li, P., Meier, T., & Yang, W. (2019). Attosecond
temporal confinement of interband excitation by intraband motion. Optics Express,
27(3), 2225–2234. https://doi.org/10.1364/oe.27.002225
bibtex: '@article{Song_Zuo_Yang_Li_Meier_Yang_2019, title={Attosecond temporal confinement
of interband excitation by intraband motion}, volume={27}, DOI={10.1364/oe.27.002225},
number={3}, journal={Optics Express}, author={Song, Xiaohong and Zuo, Ruixin and
Yang, Shidong and Li, Pengcheng and Meier, Torsten and Yang, Weifeng}, year={2019},
pages={2225–2234} }'
chicago: 'Song, Xiaohong, Ruixin Zuo, Shidong Yang, Pengcheng Li, Torsten Meier,
and Weifeng Yang. “Attosecond Temporal Confinement of Interband Excitation by
Intraband Motion.” Optics Express 27, no. 3 (2019): 2225–34. https://doi.org/10.1364/oe.27.002225.'
ieee: 'X. Song, R. Zuo, S. Yang, P. Li, T. Meier, and W. Yang, “Attosecond temporal
confinement of interband excitation by intraband motion,” Optics Express,
vol. 27, no. 3, pp. 2225–2234, 2019, doi: 10.1364/oe.27.002225.'
mla: Song, Xiaohong, et al. “Attosecond Temporal Confinement of Interband Excitation
by Intraband Motion.” Optics Express, vol. 27, no. 3, 2019, pp. 2225–34,
doi:10.1364/oe.27.002225.
short: X. Song, R. Zuo, S. Yang, P. Li, T. Meier, W. Yang, Optics Express 27 (2019)
2225–2234.
date_created: 2019-10-18T07:35:35Z
date_updated: 2023-04-21T11:27:40Z
department:
- _id: '15'
- _id: '170'
- _id: '293'
- _id: '35'
- _id: '429'
doi: 10.1364/oe.27.002225
intvolume: ' 27'
issue: '3'
language:
- iso: eng
page: 2225-2234
project:
- _id: '53'
name: TRR 142
- _id: '54'
name: TRR 142 - Project Area A
- _id: '64'
name: TRR 142 - Subproject A7
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Optics Express
publication_identifier:
issn:
- 1094-4087
publication_status: published
status: public
title: Attosecond temporal confinement of interband excitation by intraband motion
type: journal_article
user_id: '16199'
volume: 27
year: '2019'
...
---
_id: '13429'
author:
- first_name: Adriana
full_name: Bocchini, Adriana
id: '58349'
last_name: Bocchini
orcid: https://orcid.org/0000-0002-2134-3075
- first_name: Sergej
full_name: Neufeld, Sergej
id: '23261'
last_name: Neufeld
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
citation:
ama: 'Bocchini A, Neufeld S, Gerstmann U, Schmidt WG. Oxygen and potassium vacancies
in KTP calculated from first principles. Journal of Physics: Condensed Matter.
2019;31:385401. doi:10.1088/1361-648x/ab295c'
apa: 'Bocchini, A., Neufeld, S., Gerstmann, U., & Schmidt, W. G. (2019). Oxygen
and potassium vacancies in KTP calculated from first principles. Journal of
Physics: Condensed Matter, 31, 385401. https://doi.org/10.1088/1361-648x/ab295c'
bibtex: '@article{Bocchini_Neufeld_Gerstmann_Schmidt_2019, title={Oxygen and potassium
vacancies in KTP calculated from first principles}, volume={31}, DOI={10.1088/1361-648x/ab295c},
journal={Journal of Physics: Condensed Matter}, author={Bocchini, Adriana and
Neufeld, Sergej and Gerstmann, Uwe and Schmidt, Wolf Gero}, year={2019}, pages={385401}
}'
chicago: 'Bocchini, Adriana, Sergej Neufeld, Uwe Gerstmann, and Wolf Gero Schmidt.
“Oxygen and Potassium Vacancies in KTP Calculated from First Principles.” Journal
of Physics: Condensed Matter 31 (2019): 385401. https://doi.org/10.1088/1361-648x/ab295c.'
ieee: 'A. Bocchini, S. Neufeld, U. Gerstmann, and W. G. Schmidt, “Oxygen and potassium
vacancies in KTP calculated from first principles,” Journal of Physics: Condensed
Matter, vol. 31, p. 385401, 2019, doi: 10.1088/1361-648x/ab295c.'
mla: 'Bocchini, Adriana, et al. “Oxygen and Potassium Vacancies in KTP Calculated
from First Principles.” Journal of Physics: Condensed Matter, vol. 31,
2019, p. 385401, doi:10.1088/1361-648x/ab295c.'
short: 'A. Bocchini, S. Neufeld, U. Gerstmann, W.G. Schmidt, Journal of Physics:
Condensed Matter 31 (2019) 385401.'
date_created: 2019-09-20T12:22:27Z
date_updated: 2023-04-21T11:37:48Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '230'
- _id: '429'
- _id: '35'
doi: 10.1088/1361-648x/ab295c
intvolume: ' 31'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: '385401'
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '69'
name: 'TRR 142 - B4: TRR 142 - Subproject B4'
publication: 'Journal of Physics: Condensed Matter'
publication_identifier:
issn:
- 0953-8984
- 1361-648X
publication_status: published
status: public
title: Oxygen and potassium vacancies in KTP calculated from first principles
type: journal_article
user_id: '171'
volume: 31
year: '2019'
...
---
_id: '22441'
abstract:
- lang: eng
text: According to ISO / ASTM 52900, additive manufacturing (AM) is defined as "the
process of joining materials to make parts from 3D model data, usually layer upon
layer, as opposed to conventional manufacturing including subtractive manufacturing
technologies and formative manufacturing methodologies” [1]. This results in significant
advantages over conventional manufacturing methodologies, such as the production
of topologically optimized, complex structures, lower material consumption or
shorter product development cycles. In order to be able to use these advantages,
the possibilities and restrictions of the processes must be known. In particular,
selective laser beam melting (SLM), in which a powdery metallic starting material
is melted by means of a laser, requires a sound understanding of the process.
For this purpose, design guidelines have been presented in various scientific
papers. These design guidelines help to design a component in such a way that
it can be manufactured successfully using additive manufacturing. These so-called
“AMsuitable design guidelines” can be found among others at Adam, Kranz and Thomas
[2,3,4,5]. In contrast to established manufacturing processes, the post-processing
of additive components is divided into two steps. First, the AM immanent post
processing, such as the removing of the component from the building platform or
the removing of the remaining powder. These post-processing steps are in the following
referred to “post-processing”. Secondly, the subsequent post-processing steps
to improve the component properties, such as milling and turning or a stress-relief
annealing. These are referred to as “finishing” and form the focus of this paper.
With regard to a successful finishing of additively manufactured components, design
guidelines must be taken into account that consider the finishing inherent restrictions
and possibilities. In the following, these design guidelines are referred to “finishing
suitable”. They can deviate significantly from those of conventionally manufactured
components in the case of additively manufactured components. Although there are
some investigations that deal with the post-processing of additively manufactured
components [6,7], there are hardly any design guidelines that are suitable for
finishing [8]. Therefore, knowledge about the finishing of additively manufactured
components is based on experimental experience rather than on scientific knowledge.
For this reason, design guidelines for a finishing suitable design must be methodically
determined and quantified. These quantified design guidelines can be used for
an automated design check on complex components like topology optimized geometries.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lammers S, Tominski J, Zimmer D. Guidelines for post processing oriented design
of additive manufactured parts for use in topology optimization. In: II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019. ; 2019:174-185. doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf'
apa: Lammers, S., Tominski, J., & Zimmer, D. (2019). Guidelines for post processing
oriented design of additive manufactured parts for use in topology optimization.
II International Conference on Simulation for Additive Manufacturing Sim-AM
2019 11-13 September, 2019, 174–185. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
bibtex: '@inproceedings{Lammers_Tominski_Zimmer_2019, title={Guidelines for post
processing oriented design of additive manufactured parts for use in topology
optimization}, DOI={http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf},
booktitle={II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019}, author={Lammers, Stefan and Tominski, Johannes
and Zimmer, Detmar}, year={2019}, pages={174–185} }'
chicago: Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for
Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology
Optimization.” In II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019, 174–85, 2019. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
ieee: 'S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented
design of additive manufactured parts for use in topology optimization,” in II
International Conference on Simulation for Additive Manufacturing Sim-AM 2019
11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.'
mla: Lammers, Stefan, et al. “Guidelines for Post Processing Oriented Design of
Additive Manufactured Parts for Use in Topology Optimization.” II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019, 2019, pp. 174–85, doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
short: 'S. Lammers, J. Tominski, D. Zimmer, in: II International Conference on Simulation
for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185.'
date_created: 2021-06-15T11:10:15Z
date_updated: 2023-05-04T07:26:59Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
language:
- iso: eng
page: 174-185
publication: II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019
publication_identifier:
isbn:
- 978-84-949194-8-0
quality_controlled: '1'
status: public
title: Guidelines for post processing oriented design of additive manufactured parts
for use in topology optimization
type: conference
user_id: '13835'
year: '2019'
...
---
_id: '21462'
abstract:
- lang: eng
text: This paper presents a new methodology by using a multiple coil array for energy
transmission. The complex current strengths of the transmitting coil array are
calculated by having the knowledge about of the mutual inductances and the symmetries
of the transmitting coil array, so that its resulting magnetic field mainly penetrates
only the receiving coil and is strongly attenuated outside. This method is used
for an optimized wireless energy transmission but can also be implemented for
other inductive applications.
author:
- first_name: Sven
full_name: Lange, Sven
id: '38240'
last_name: Lange
orcid: '0009-0007-9150-2266 '
- first_name: Maik-Julian
full_name: Büker, Maik-Julian
last_name: Büker
- first_name: Denis
full_name: Sievers, Denis
last_name: Sievers
- first_name: Christian
full_name: Hedayat, Christian
last_name: Hedayat
- first_name: Jens
full_name: Förstner, Jens
id: '158'
last_name: Förstner
orcid: 0000-0001-7059-9862
- first_name: Ulrich
full_name: Hilleringmann, Ulrich
last_name: Hilleringmann
- first_name: Thomas
full_name: Otto, Thomas
last_name: Otto
citation:
ama: 'Lange S, Büker M-J, Sievers D, et al. Method of superposing a multiple driven
magnetic field to minimize stray fields around the receiver for inductive wireless
power transmission. In: Smart Systems Integration; 13th International Conference
and Exhibition on Integration Issues of Miniaturized Systems. VDE VERLAG GMBH;
2019:1-4.'
apa: Lange, S., Büker, M.-J., Sievers, D., Hedayat, C., Förstner, J., Hilleringmann,
U., & Otto, T. (2019). Method of superposing a multiple driven magnetic field
to minimize stray fields around the receiver for inductive wireless power transmission.
Smart Systems Integration; 13th International Conference and Exhibition on
Integration Issues of Miniaturized Systems, 1–4.
bibtex: '@inproceedings{Lange_Büker_Sievers_Hedayat_Förstner_Hilleringmann_Otto_2019,
place={Berlin · Offenbach}, title={Method of superposing a multiple driven magnetic
field to minimize stray fields around the receiver for inductive wireless power
transmission}, booktitle={Smart Systems Integration; 13th International Conference
and Exhibition on Integration Issues of Miniaturized Systems}, publisher={VDE
VERLAG GMBH}, author={Lange, Sven and Büker, Maik-Julian and Sievers, Denis and
Hedayat, Christian and Förstner, Jens and Hilleringmann, Ulrich and Otto, Thomas},
year={2019}, pages={1–4} }'
chicago: 'Lange, Sven, Maik-Julian Büker, Denis Sievers, Christian Hedayat, Jens
Förstner, Ulrich Hilleringmann, and Thomas Otto. “Method of Superposing a Multiple
Driven Magnetic Field to Minimize Stray Fields around the Receiver for Inductive
Wireless Power Transmission.” In Smart Systems Integration; 13th International
Conference and Exhibition on Integration Issues of Miniaturized Systems, 1–4.
Berlin · Offenbach: VDE VERLAG GMBH, 2019.'
ieee: S. Lange et al., “Method of superposing a multiple driven magnetic
field to minimize stray fields around the receiver for inductive wireless power
transmission,” in Smart Systems Integration; 13th International Conference
and Exhibition on Integration Issues of Miniaturized Systems, Barcelona, Spain
, 2019, pp. 1–4.
mla: Lange, Sven, et al. “Method of Superposing a Multiple Driven Magnetic Field
to Minimize Stray Fields around the Receiver for Inductive Wireless Power Transmission.”
Smart Systems Integration; 13th International Conference and Exhibition on
Integration Issues of Miniaturized Systems, VDE VERLAG GMBH, 2019, pp. 1–4.
short: 'S. Lange, M.-J. Büker, D. Sievers, C. Hedayat, J. Förstner, U. Hilleringmann,
T. Otto, in: Smart Systems Integration; 13th International Conference and Exhibition
on Integration Issues of Miniaturized Systems, VDE VERLAG GMBH, Berlin · Offenbach,
2019, pp. 1–4.'
conference:
end_date: 2019-04-11
location: 'Barcelona, Spain '
name: Smart Systems Integration; 13th International Conference and Exhibition on
Integration Issues of Miniaturized Systems
start_date: 2019-04-10
date_created: 2021-03-12T09:46:55Z
date_updated: 2024-11-30T19:32:36Z
department:
- _id: '59'
- _id: '61'
- _id: '485'
keyword:
- tet_enas
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/8727831
page: 1-4
place: Berlin · Offenbach
publication: Smart Systems Integration; 13th International Conference and Exhibition
on Integration Issues of Miniaturized Systems
publication_identifier:
isbn:
- 978-3-8007-4919-5
publication_status: published
publisher: VDE VERLAG GMBH
related_material:
record:
- id: '9265'
relation: other
status: deleted
status: public
title: Method of superposing a multiple driven magnetic field to minimize stray fields
around the receiver for inductive wireless power transmission
type: conference
user_id: '158'
year: '2019'
...
---
_id: '58057'
author:
- first_name: A.A.
full_name: Demenev, A.A.
last_name: Demenev
- first_name: D.D.
full_name: Yaremkevich, D.D.
last_name: Yaremkevich
- first_name: 'A.V. '
full_name: 'Scherbakov, A.V. '
last_name: Scherbakov
- first_name: S.M.
full_name: Kukhtaruk, S.M.
last_name: Kukhtaruk
- first_name: S.S.
full_name: Gavrilov, S.S.
last_name: Gavrilov
- first_name: 'D.R. '
full_name: 'Yakolev, D.R. '
last_name: Yakolev
- first_name: V.D.
full_name: Kulakovskii, V.D.
last_name: Kulakovskii
- first_name: M.
full_name: Bayer, M.
last_name: Bayer
citation:
ama: Demenev AA, Yaremkevich DD, Scherbakov AV, et al. Ultrafast strain-induced
switching of a bistable cavity-polariton system. Physical Review B. 2019.
apa: Demenev, A. A., Yaremkevich, D. D., Scherbakov, A. V., Kukhtaruk, S. M., Gavrilov,
S. S., Yakolev, D. R., Kulakovskii, V. D., & Bayer, M. (2019). Ultrafast strain-induced
switching of a bistable cavity-polariton system. Physical Review B.
bibtex: '@article{Demenev_Yaremkevich_Scherbakov_Kukhtaruk_Gavrilov_Yakolev_Kulakovskii_Bayer_2019,
title={Ultrafast strain-induced switching of a bistable cavity-polariton system},
journal={Physical Review B}, author={Demenev, A.A. and Yaremkevich, D.D. and Scherbakov,
A.V. and Kukhtaruk, S.M. and Gavrilov, S.S. and Yakolev, D.R. and Kulakovskii,
V.D. and Bayer, M.}, year={2019} }'
chicago: Demenev, A.A., D.D. Yaremkevich, A.V. Scherbakov, S.M. Kukhtaruk, S.S.
Gavrilov, D.R. Yakolev, V.D. Kulakovskii, and M. Bayer. “Ultrafast Strain-Induced
Switching of a Bistable Cavity-Polariton System.” Physical Review B, 2019.
ieee: A. A. Demenev et al., “Ultrafast strain-induced switching of a bistable
cavity-polariton system,” Physical Review B, 2019.
mla: Demenev, A. A., et al. “Ultrafast Strain-Induced Switching of a Bistable Cavity-Polariton
System.” Physical Review B, 2019.
short: A.A. Demenev, D.D. Yaremkevich, A.V. Scherbakov, S.M. Kukhtaruk, S.S. Gavrilov,
D.R. Yakolev, V.D. Kulakovskii, M. Bayer, Physical Review B (2019).
date_created: 2025-01-06T15:14:50Z
date_updated: 2025-01-07T15:37:14Z
department:
- _id: '429'
extern: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://journals.aps.org/prb/abstract/10.1103/PhysRevB.100.100301
oa: '1'
project:
- _id: '63'
grant_number: '231447078'
name: 'TRR 142 - A06: TRR 142 - Ultraschnelle Akustik zur Modulation von Lichtemission
(A06)'
publication: Physical Review B
publication_date: 2019-09-10
publication_status: published
status: public
title: Ultrafast strain-induced switching of a bistable cavity-polariton system
type: newspaper_article
user_id: '94792'
year: '2019'
...
---
_id: '20578'
article_type: original
author:
- first_name: R
full_name: Driben, R
last_name: Driben
- first_name: Xuekai
full_name: Ma, Xuekai
id: '59416'
last_name: Ma
- first_name: Stefan
full_name: Schumacher, Stefan
id: '27271'
last_name: Schumacher
orcid: 0000-0003-4042-4951
- first_name: Torsten
full_name: Meier, Torsten
id: '344'
last_name: Meier
orcid: 0000-0001-8864-2072
citation:
ama: Driben R, Ma X, Schumacher S, Meier T. Bloch oscillations of multidimensional
dark soliton wave packets and light bullets. Optics Letters. 2019;44(6):1327-1330.
doi:10.1364/ol.44.001327
apa: Driben, R., Ma, X., Schumacher, S., & Meier, T. (2019). Bloch oscillations
of multidimensional dark soliton wave packets and light bullets. Optics Letters,
44(6), 1327–1330. https://doi.org/10.1364/ol.44.001327
bibtex: '@article{Driben_Ma_Schumacher_Meier_2019, title={Bloch oscillations of
multidimensional dark soliton wave packets and light bullets}, volume={44}, DOI={10.1364/ol.44.001327}, number={6},
journal={Optics Letters}, author={Driben, R and Ma, Xuekai and Schumacher, Stefan
and Meier, Torsten}, year={2019}, pages={1327–1330} }'
chicago: 'Driben, R, Xuekai Ma, Stefan Schumacher, and Torsten Meier. “Bloch Oscillations
of Multidimensional Dark Soliton Wave Packets and Light Bullets.” Optics Letters
44, no. 6 (2019): 1327–30. https://doi.org/10.1364/ol.44.001327.'
ieee: 'R. Driben, X. Ma, S. Schumacher, and T. Meier, “Bloch oscillations of multidimensional
dark soliton wave packets and light bullets,” Optics Letters, vol. 44,
no. 6, pp. 1327–1330, 2019, doi: 10.1364/ol.44.001327.'
mla: Driben, R., et al. “Bloch Oscillations of Multidimensional Dark Soliton Wave
Packets and Light Bullets.” Optics Letters, vol. 44, no. 6, 2019, pp. 1327–30,
doi:10.1364/ol.44.001327.
short: R. Driben, X. Ma, S. Schumacher, T. Meier, Optics Letters 44 (2019) 1327–1330.
date_created: 2020-12-02T08:58:21Z
date_updated: 2025-12-05T13:45:12Z
department:
- _id: '15'
- _id: '170'
- _id: '230'
- _id: '429'
- _id: '297'
- _id: '705'
- _id: '35'
- _id: '293'
doi: 10.1364/ol.44.001327
external_id:
pmid:
- '30874642'
intvolume: ' 44'
issue: '6'
language:
- iso: eng
page: 1327-1330
pmid: '1'
project:
- _id: '53'
name: TRR 142
- _id: '54'
name: TRR 142 - Project Area A
- _id: '61'
name: TRR 142 - Subproject A4
- _id: '53'
name: 'TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten
zu funktionellen Strukturen'
publication: Optics Letters
publication_identifier:
issn:
- 0146-9592
- 1539-4794
publication_status: published
status: public
title: Bloch oscillations of multidimensional dark soliton wave packets and light
bullets
type: journal_article
user_id: '16199'
volume: 44
year: '2019'
...
---
_id: '40384'
article_number: '053829'
author:
- first_name: Alessandro
full_name: Ferreri, Alessandro
id: '65609'
last_name: Ferreri
- first_name: V.
full_name: Ansari, V.
last_name: Ansari
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
- first_name: Polina R.
full_name: Sharapova, Polina R.
id: '60286'
last_name: Sharapova
citation:
ama: Ferreri A, Ansari V, Silberhorn C, Sharapova PR. Temporally multimode four-photon
Hong-Ou-Mandel interference. Physical Review A. 2019;100(5). doi:10.1103/physreva.100.053829
apa: Ferreri, A., Ansari, V., Silberhorn, C., & Sharapova, P. R. (2019). Temporally
multimode four-photon Hong-Ou-Mandel interference. Physical Review A, 100(5),
Article 053829. https://doi.org/10.1103/physreva.100.053829
bibtex: '@article{Ferreri_Ansari_Silberhorn_Sharapova_2019, title={Temporally multimode
four-photon Hong-Ou-Mandel interference}, volume={100}, DOI={10.1103/physreva.100.053829},
number={5053829}, journal={Physical Review A}, publisher={American Physical Society
(APS)}, author={Ferreri, Alessandro and Ansari, V. and Silberhorn, Christine and
Sharapova, Polina R.}, year={2019} }'
chicago: Ferreri, Alessandro, V. Ansari, Christine Silberhorn, and Polina R. Sharapova.
“Temporally Multimode Four-Photon Hong-Ou-Mandel Interference.” Physical Review
A 100, no. 5 (2019). https://doi.org/10.1103/physreva.100.053829.
ieee: 'A. Ferreri, V. Ansari, C. Silberhorn, and P. R. Sharapova, “Temporally multimode
four-photon Hong-Ou-Mandel interference,” Physical Review A, vol. 100,
no. 5, Art. no. 053829, 2019, doi: 10.1103/physreva.100.053829.'
mla: Ferreri, Alessandro, et al. “Temporally Multimode Four-Photon Hong-Ou-Mandel
Interference.” Physical Review A, vol. 100, no. 5, 053829, American Physical
Society (APS), 2019, doi:10.1103/physreva.100.053829.
short: A. Ferreri, V. Ansari, C. Silberhorn, P.R. Sharapova, Physical Review A 100
(2019).
date_created: 2023-01-26T14:12:28Z
date_updated: 2025-12-16T11:28:33Z
department:
- _id: '15'
- _id: '569'
- _id: '170'
- _id: '288'
- _id: '230'
- _id: '429'
- _id: '35'
doi: 10.1103/physreva.100.053829
intvolume: ' 100'
issue: '5'
language:
- iso: eng
project:
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '56'
name: 'TRR 142 - C: TRR 142 - Project Area C'
- _id: '72'
name: 'TRR 142 - C2: TRR 142 - Subproject C2'
publication: Physical Review A
publication_identifier:
issn:
- 2469-9926
- 2469-9934
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Temporally multimode four-photon Hong-Ou-Mandel interference
type: journal_article
user_id: '16199'
volume: 100
year: '2019'
...
---
_id: '25304'
author:
- first_name: Andreas
full_name: Wolk, Andreas
last_name: Wolk
- first_name: Marta
full_name: Rosenthal, Marta
last_name: Rosenthal
- first_name: Stephan
full_name: Neuhaus, Stephan
last_name: Neuhaus
- first_name: Klaus
full_name: Huber, Klaus
last_name: Huber
- first_name: Katharina
full_name: Brassat, Katharina
last_name: Brassat
- first_name: Jörg K. N.
full_name: Lindner, Jörg K. N.
last_name: Lindner
- first_name: Richard
full_name: Grothe, Richard
last_name: Grothe
- first_name: Guido
full_name: Grundmeier, Guido
last_name: Grundmeier
- first_name: Wolfgang
full_name: Bremser, Wolfgang
id: '32'
last_name: Bremser
- first_name: René
full_name: Wilhelm, René
last_name: Wilhelm
citation:
ama: Wolk A, Rosenthal M, Neuhaus S, et al. A Novel Lubricant Based on Covalent
Functionalized Graphene Oxide Quantum Dots. Scientific Reports. Published
online 2018. doi:10.1038/s41598-018-24062-2
apa: Wolk, A., Rosenthal, M., Neuhaus, S., Huber, K., Brassat, K., Lindner, J. K.
N., Grothe, R., Grundmeier, G., Bremser, W., & Wilhelm, R. (2018). A Novel
Lubricant Based on Covalent Functionalized Graphene Oxide Quantum Dots. Scientific
Reports. https://doi.org/10.1038/s41598-018-24062-2
bibtex: '@article{Wolk_Rosenthal_Neuhaus_Huber_Brassat_Lindner_Grothe_Grundmeier_Bremser_Wilhelm_2018,
title={A Novel Lubricant Based on Covalent Functionalized Graphene Oxide Quantum
Dots}, DOI={10.1038/s41598-018-24062-2},
journal={Scientific Reports}, author={Wolk, Andreas and Rosenthal, Marta and Neuhaus,
Stephan and Huber, Klaus and Brassat, Katharina and Lindner, Jörg K. N. and Grothe,
Richard and Grundmeier, Guido and Bremser, Wolfgang and Wilhelm, René}, year={2018}
}'
chicago: Wolk, Andreas, Marta Rosenthal, Stephan Neuhaus, Klaus Huber, Katharina
Brassat, Jörg K. N. Lindner, Richard Grothe, Guido Grundmeier, Wolfgang Bremser,
and René Wilhelm. “A Novel Lubricant Based on Covalent Functionalized Graphene
Oxide Quantum Dots.” Scientific Reports, 2018. https://doi.org/10.1038/s41598-018-24062-2.
ieee: 'A. Wolk et al., “A Novel Lubricant Based on Covalent Functionalized
Graphene Oxide Quantum Dots,” Scientific Reports, 2018, doi: 10.1038/s41598-018-24062-2.'
mla: Wolk, Andreas, et al. “A Novel Lubricant Based on Covalent Functionalized Graphene
Oxide Quantum Dots.” Scientific Reports, 2018, doi:10.1038/s41598-018-24062-2.
short: A. Wolk, M. Rosenthal, S. Neuhaus, K. Huber, K. Brassat, J.K.N. Lindner,
R. Grothe, G. Grundmeier, W. Bremser, R. Wilhelm, Scientific Reports (2018).
date_created: 2021-10-04T13:29:12Z
date_updated: 2022-01-06T06:57:00Z
department:
- _id: '321'
- _id: '301'
doi: 10.1038/s41598-018-24062-2
language:
- iso: eng
publication: Scientific Reports
publication_identifier:
issn:
- 2045-2322
publication_status: published
status: public
title: A Novel Lubricant Based on Covalent Functionalized Graphene Oxide Quantum Dots
type: journal_article
user_id: '32'
year: '2018'
...
---
_id: '25305'
author:
- first_name: Arne A.
full_name: Rüdiger, Arne A.
last_name: Rüdiger
- first_name: Katharina
full_name: Brassat, Katharina
last_name: Brassat
- first_name: Jörg K. N.
full_name: Lindner, Jörg K. N.
last_name: Lindner
- first_name: Wolfgang
full_name: Bremser, Wolfgang
id: '32'
last_name: Bremser
- first_name: Oliver I.
full_name: Strube, Oliver I.
last_name: Strube
citation:
ama: Rüdiger AA, Brassat K, Lindner JKN, Bremser W, Strube OI. Easily Accessible
Protein Nanostructures via Enzyme Mediated Addressing. Langmuir. Published
online 2018:4264-4270. doi:10.1021/acs.langmuir.7b04089
apa: Rüdiger, A. A., Brassat, K., Lindner, J. K. N., Bremser, W., & Strube,
O. I. (2018). Easily Accessible Protein Nanostructures via Enzyme Mediated Addressing.
Langmuir, 4264–4270. https://doi.org/10.1021/acs.langmuir.7b04089
bibtex: '@article{Rüdiger_Brassat_Lindner_Bremser_Strube_2018, title={Easily Accessible
Protein Nanostructures via Enzyme Mediated Addressing}, DOI={10.1021/acs.langmuir.7b04089},
journal={Langmuir}, author={Rüdiger, Arne A. and Brassat, Katharina and Lindner,
Jörg K. N. and Bremser, Wolfgang and Strube, Oliver I.}, year={2018}, pages={4264–4270}
}'
chicago: Rüdiger, Arne A., Katharina Brassat, Jörg K. N. Lindner, Wolfgang Bremser,
and Oliver I. Strube. “Easily Accessible Protein Nanostructures via Enzyme Mediated
Addressing.” Langmuir, 2018, 4264–70. https://doi.org/10.1021/acs.langmuir.7b04089.
ieee: 'A. A. Rüdiger, K. Brassat, J. K. N. Lindner, W. Bremser, and O. I. Strube,
“Easily Accessible Protein Nanostructures via Enzyme Mediated Addressing,” Langmuir,
pp. 4264–4270, 2018, doi: 10.1021/acs.langmuir.7b04089.'
mla: Rüdiger, Arne A., et al. “Easily Accessible Protein Nanostructures via Enzyme
Mediated Addressing.” Langmuir, 2018, pp. 4264–70, doi:10.1021/acs.langmuir.7b04089.
short: A.A. Rüdiger, K. Brassat, J.K.N. Lindner, W. Bremser, O.I. Strube, Langmuir
(2018) 4264–4270.
date_created: 2021-10-04T13:33:27Z
date_updated: 2022-01-06T06:57:00Z
department:
- _id: '321'
- _id: '301'
doi: 10.1021/acs.langmuir.7b04089
language:
- iso: eng
page: 4264-4270
publication: Langmuir
publication_identifier:
issn:
- 0743-7463
- 1520-5827
publication_status: published
status: public
title: Easily Accessible Protein Nanostructures via Enzyme Mediated Addressing
type: journal_article
user_id: '32'
year: '2018'
...
---
_id: '19868'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Nikolay
full_name: Sotirov, Nikolay
last_name: Sotirov
- first_name: Jörn
full_name: Tölle, Jörn
last_name: Tölle
- first_name: Friedrich
full_name: Bohner, Friedrich
last_name: Bohner
citation:
ama: 'Camberg AA, Tröster T, Sotirov N, Tölle J, Bohner F. Investigation of ductility
and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions.
In: Materials Science and Engineering (MSE) Congress 2018. Darmstadt; 2018.'
apa: Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., & Bohner, F. (2018).
Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal
forming conditions. In Materials Science and Engineering (MSE) Congress 2018.
Darmstadt.
bibtex: '@inproceedings{Camberg_Tröster_Sotirov_Tölle_Bohner_2018, place={Darmstadt},
title={Investigation of ductility and damage characteristics of EN AW-5182 H18
at non-isothermal forming conditions}, booktitle={Materials Science and Engineering
(MSE) Congress 2018}, author={Camberg, Alan Adam and Tröster, Thomas and Sotirov,
Nikolay and Tölle, Jörn and Bohner, Friedrich}, year={2018} }'
chicago: Camberg, Alan Adam, Thomas Tröster, Nikolay Sotirov, Jörn Tölle, and Friedrich
Bohner. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18
at Non-Isothermal Forming Conditions.” In Materials Science and Engineering
(MSE) Congress 2018. Darmstadt, 2018.
ieee: A. A. Camberg, T. Tröster, N. Sotirov, J. Tölle, and F. Bohner, “Investigation
of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming
conditions,” in Materials Science and Engineering (MSE) Congress 2018,
Darmstadt, 2018.
mla: Camberg, Alan Adam, et al. “Investigation of Ductility and Damage Characteristics
of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” Materials Science
and Engineering (MSE) Congress 2018, 2018.
short: 'A.A. Camberg, T. Tröster, N. Sotirov, J. Tölle, F. Bohner, in: Materials
Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.'
conference:
end_date: 2018-09-27
location: Darmstadt
name: Materials Science and Engineering (MSE) Congress 2018
start_date: 2018-09-25
date_created: 2020-10-04T19:23:56Z
date_updated: 2022-01-06T06:54:14Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
place: Darmstadt
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Materials Science and Engineering (MSE) Congress 2018
publication_status: published
status: public
title: Investigation of ductility and damage characteristics of EN AW-5182 H18 at
non-isothermal forming conditions
type: conference_abstract
user_id: '60544'
year: '2018'
...
---
_id: '20'
abstract:
- lang: eng
text: "Approximate computing has shown to provide new ways to improve performance\r\nand
power consumption of error-resilient applications. While many of these\r\napplications
can be found in image processing, data classification or machine\r\nlearning,
we demonstrate its suitability to a problem from scientific\r\ncomputing. Utilizing
the self-correcting behavior of iterative algorithms, we\r\nshow that approximate
computing can be applied to the calculation of inverse\r\nmatrix p-th roots which
are required in many applications in scientific\r\ncomputing. Results show great
opportunities to reduce the computational effort\r\nand bandwidth required for
the execution of the discussed algorithm, especially\r\nwhen targeting special
accelerator hardware."
author:
- first_name: Michael
full_name: Lass, Michael
id: '24135'
last_name: Lass
orcid: 0000-0002-5708-7632
- first_name: Thomas
full_name: Kühne, Thomas
id: '49079'
last_name: Kühne
- first_name: Christian
full_name: Plessl, Christian
id: '16153'
last_name: Plessl
orcid: 0000-0001-5728-9982
citation:
ama: Lass M, Kühne T, Plessl C. Using Approximate Computing for the Calculation
of Inverse Matrix p-th Roots. Embedded Systems Letters. 2018;10(2):33-36.
doi:10.1109/LES.2017.2760923
apa: Lass, M., Kühne, T., & Plessl, C. (2018). Using Approximate Computing for
the Calculation of Inverse Matrix p-th Roots. Embedded Systems Letters,
10(2), 33–36. https://doi.org/10.1109/LES.2017.2760923
bibtex: '@article{Lass_Kühne_Plessl_2018, title={Using Approximate Computing for
the Calculation of Inverse Matrix p-th Roots}, volume={10}, DOI={10.1109/LES.2017.2760923},
number={2}, journal={Embedded Systems Letters}, publisher={IEEE}, author={Lass,
Michael and Kühne, Thomas and Plessl, Christian}, year={2018}, pages={33–36} }'
chicago: 'Lass, Michael, Thomas Kühne, and Christian Plessl. “Using Approximate
Computing for the Calculation of Inverse Matrix P-Th Roots.” Embedded Systems
Letters 10, no. 2 (2018): 33–36. https://doi.org/10.1109/LES.2017.2760923.'
ieee: M. Lass, T. Kühne, and C. Plessl, “Using Approximate Computing for the Calculation
of Inverse Matrix p-th Roots,” Embedded Systems Letters, vol. 10, no. 2,
pp. 33–36, 2018.
mla: Lass, Michael, et al. “Using Approximate Computing for the Calculation of Inverse
Matrix P-Th Roots.” Embedded Systems Letters, vol. 10, no. 2, IEEE, 2018,
pp. 33–36, doi:10.1109/LES.2017.2760923.
short: M. Lass, T. Kühne, C. Plessl, Embedded Systems Letters 10 (2018) 33–36.
date_created: 2017-07-25T14:41:08Z
date_updated: 2022-01-06T06:54:18Z
department:
- _id: '27'
- _id: '518'
- _id: '304'
doi: 10.1109/LES.2017.2760923
external_id:
arxiv:
- '1703.02283'
intvolume: ' 10'
issue: '2'
language:
- iso: eng
page: ' 33-36'
project:
- _id: '32'
grant_number: PL 595/2-1
name: Performance and Efficiency in HPC with Custom Computing
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Embedded Systems Letters
publication_identifier:
eissn:
- 1943-0671
issn:
- 1943-0663
publication_status: published
publisher: IEEE
status: public
title: Using Approximate Computing for the Calculation of Inverse Matrix p-th Roots
type: journal_article
user_id: '16153'
volume: 10
year: '2018'
...
---
_id: '28361'
author:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
id: '163'
last_name: Gausemeier
citation:
ama: Gausemeier J. Vorausschau und Technologieplanung. 14. Symposium für Vorausschau
und Technologieplanung, Heinz Nixdorf Institut, 8. und 9. November 2018. Vol
385. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2018.
apa: Gausemeier, J. (2018). Vorausschau und Technologieplanung. 14. Symposium
für Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 8. und 9. November
2018 (Vol. 385). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
bibtex: '@book{Gausemeier_2018, series={Verlagsschriftenreihe des Heinz Nixdorf
Instituts, Paderborn}, title={Vorausschau und Technologieplanung. 14. Symposium
für Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 8. und 9. November
2018}, volume={385}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn}, author={Gausemeier, Jürgen}, year={2018}, collection={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn} }'
chicago: Gausemeier, Jürgen. Vorausschau und Technologieplanung. 14. Symposium
für Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 8. und 9. November
2018. Vol. 385. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2018.
ieee: J. Gausemeier, Vorausschau und Technologieplanung. 14. Symposium für Vorausschau
und Technologieplanung, Heinz Nixdorf Institut, 8. und 9. November 2018, vol.
385. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2018.
mla: Gausemeier, Jürgen. Vorausschau und Technologieplanung. 14. Symposium für
Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 8. und 9. November
2018. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2018.
short: J. Gausemeier, Vorausschau und Technologieplanung. 14. Symposium für Vorausschau
und Technologieplanung, Heinz Nixdorf Institut, 8. und 9. November 2018, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2018.
date_created: 2021-12-07T13:21:19Z
date_updated: 2022-01-06T06:58:02Z
department:
- _id: '26'
intvolume: ' 385'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-947647-04-0
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Vorausschau und Technologieplanung. 14. Symposium für Vorausschau und Technologieplanung,
Heinz Nixdorf Institut, 8. und 9. November 2018
type: misc
user_id: '60046'
volume: 385
year: '2018'
...
---
_id: '24527'
author:
- first_name: Matthias
full_name: Hopp, Matthias
id: '13142'
last_name: Hopp
citation:
ama: Hopp M. Verfahrenstechnische Entwicklung Zum Kleben von WPC Für Anwendungsgebiete
Aus Dem Holz-/Kunststoffbereich. Shaker Verlag; 2018.
apa: Hopp, M. (2018). Verfahrenstechnische Entwicklung zum Kleben von WPC für
Anwendungsgebiete aus dem Holz-/Kunststoffbereich. Shaker Verlag.
bibtex: '@book{Hopp_2018, place={Aachen}, title={Verfahrenstechnische Entwicklung
zum Kleben von WPC für Anwendungsgebiete aus dem Holz-/Kunststoffbereich}, publisher={Shaker
Verlag}, author={Hopp, Matthias}, year={2018} }'
chicago: 'Hopp, Matthias. Verfahrenstechnische Entwicklung Zum Kleben von WPC
Für Anwendungsgebiete Aus Dem Holz-/Kunststoffbereich. Aachen: Shaker Verlag,
2018.'
ieee: 'M. Hopp, Verfahrenstechnische Entwicklung zum Kleben von WPC für Anwendungsgebiete
aus dem Holz-/Kunststoffbereich. Aachen: Shaker Verlag, 2018.'
mla: Hopp, Matthias. Verfahrenstechnische Entwicklung Zum Kleben von WPC Für
Anwendungsgebiete Aus Dem Holz-/Kunststoffbereich. Shaker Verlag, 2018.
short: M. Hopp, Verfahrenstechnische Entwicklung Zum Kleben von WPC Für Anwendungsgebiete
Aus Dem Holz-/Kunststoffbereich, Shaker Verlag, Aachen, 2018.
date_created: 2021-09-15T12:36:38Z
date_updated: 2022-01-06T06:56:27Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Aachen
publisher: Shaker Verlag
status: public
title: Verfahrenstechnische Entwicklung zum Kleben von WPC für Anwendungsgebiete aus
dem Holz-/Kunststoffbereich
type: dissertation
user_id: '13142'
year: '2018'
...