---
_id: '22196'
abstract:
- lang: eng
text: The influence of selective laser sintering (SLS) parameters on PA12 part properties
is well known, but research on other materials is rare. One alternative material
is a thermoplastic elastomer (TPE) called PrimePart ST that is more elastic and
shows a distinct SLS processing behavior. It undergoes a three-dimensional temperature
distribution during the SLS process within the TPE part cake. To examine this
further, a temperature measurement system that allows temperature measurements
inside the part cake is applied to TPE in the present work. Position-dependent
temperature histories are directly correlated with the color and mechanical properties
of built parts and are in very good agreement with artificial heat treatment in
a furnace. Furthermore, it is clearly shown that the yellowish discoloration of
parts in different intensities is not only temperature dependent but also influenced
by the residual oxygen content in the process atmosphere. Nevertheless, the discoloration
has no influence on the mechanical part properties.
author:
- first_name: Christina
full_name: Kummert, Christina
last_name: Kummert
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: Kummert C, Josupeit S, Schmid H-J. Thermoplastic Elastomer Part Color as Function
of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.
Journal of Minerals, Metals and Materials Society. 2018;70(3):425-430.
doi:10.1007/s11837-017-2658-2
apa: Kummert, C., Josupeit, S., & Schmid, H.-J. (2018). Thermoplastic Elastomer
Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective
Laser Sinterung. Journal of Minerals, Metals and Materials Society, 70(3),
425–430. https://doi.org/10.1007/s11837-017-2658-2
bibtex: '@article{Kummert_Josupeit_Schmid_2018, title={Thermoplastic Elastomer Part
Color as Function of Temperature Histories and Oxygen Atmosphere During Selective
Laser Sinterung}, volume={70}, DOI={10.1007/s11837-017-2658-2},
number={3}, journal={Journal of Minerals, Metals and Materials Society}, publisher={Springer},
author={Kummert, Christina and Josupeit, Stefan and Schmid, Hans-Joachim}, year={2018},
pages={425–430} }'
chicago: 'Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic
Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere
During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials
Society 70, no. 3 (2018): 425–30. https://doi.org/10.1007/s11837-017-2658-2.'
ieee: C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color
as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser
Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70,
no. 3, pp. 425–430, 2018.
mla: Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function
of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.”
Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer,
2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
short: C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials
Society 70 (2018) 425–430.
date_created: 2021-05-14T07:46:28Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1007/s11837-017-2658-2
intvolume: ' 70'
issue: '3'
language:
- iso: eng
page: 425-430
publication: Journal of Minerals, Metals and Materials Society
publisher: Springer
status: public
title: Thermoplastic Elastomer Part Color as Function of Temperature Histories and
Oxygen Atmosphere During Selective Laser Sinterung
type: journal_article
user_id: '71545'
volume: 70
year: '2018'
...
---
_id: '22430'
author:
- first_name: Stefan
full_name: Urbanek, Stefan
last_name: Urbanek
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Alexander
full_name: Taube, Alexander
last_name: Taube
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: Conference
Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250. ; 2018.'
apa: 'Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,
… Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part
and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250.'
bibtex: '@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018,
title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for
a Permanent Magnet Synchronous Machine}, booktitle={Conference paper, 2018 IEEE
Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250},
author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter
and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar},
year={2018} }'
chicago: 'Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko
Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing
of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous
Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
ieee: 'S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor
Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference
paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
mla: 'Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active
Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250, 2018.'
short: 'S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T.
Lieneke, D. Zimmer, in: Conference Paper, 2018 IEEE Transportation Electrification
Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
date_created: 2021-06-15T11:10:02Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: 'Conference paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250'
status: public
title: Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a
Permanent Magnet Synchronous Machine
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22433'
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
citation:
ama: 'Tominski J, Lammers S. Software-assisted design check of additive manufactured
components. In: 14th PERMAS Users’ Conference. Vol 14. ; 2018. doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted'
apa: Tominski, J., & Lammers, S. (2018). Software-assisted design check of additive
manufactured components. In 14th PERMAS Users’ Conference (Vol. 14). https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
bibtex: '@inproceedings{Tominski_Lammers_2018, title={Software-assisted design check
of additive manufactured components}, volume={14}, DOI={https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted},
booktitle={14th PERMAS Users’ Conference}, author={Tominski, Johannes and Lammers,
Stefan}, year={2018} }'
chicago: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check
of Additive Manufactured Components.” In 14th PERMAS Users’ Conference,
Vol. 14, 2018. https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
ieee: J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured
components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
mla: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of
Additive Manufactured Components.” 14th PERMAS Users’ Conference, vol.
14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
short: 'J. Tominski, S. Lammers, in: 14th PERMAS Users’ Conference, 2018.'
date_created: 2021-06-15T11:10:05Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
intvolume: ' 14'
language:
- iso: eng
publication: 14th PERMAS Users' Conference
publication_identifier:
isbn:
- 978-3-926494-18-4
status: public
title: Software-assisted design check of additive manufactured components
type: conference
user_id: '38077'
volume: 14
year: '2018'
...
---
_id: '22434'
abstract:
- lang: eng
text: This paper reports on the experimental development and the theoretical analysis
of the scanning laser epitaxy (SLE) process that is currently being investigated
and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing
process for deposition of equiaxed, directionally solidified and single-crystal
nickel superalloys onto superalloy substrates through the selective melting and
re-solidification of superalloy powders. The thermal modeling of the system, done
in a commercial CFD software package, simulates a heat source moving over a powder
bed and considers the approximate change in the property values for consolidating
CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the
melting temperature criteria and the resulting plots are presented alongside matching
experimental micrographs obtained through cross-sectional metallography. The influence
of the processing parameters on the microstructural evolution, as evidenced through
observations made from the micrographs, is discussed. This work is sponsored by
the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526.
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Christian
full_name: Wulf, Christian
last_name: Wulf
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design
Check of Additively Manufactured Components. In: 29th Annual International
Solid Freeform Fabrication Symposium. Vol 29. ; 2018. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf'
apa: Tominski, J., Lammers, S., Wulf, C., & Zimmer, D. (2018). Method for a
Software-based Design Check of Additively Manufactured Components. In 29th
Annual International Solid Freeform Fabrication Symposium (Vol. 29). http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
bibtex: '@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based
Design Check of Additively Manufactured Components}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski,
Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018}
}'
chicago: Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer.
“Method for a Software-Based Design Check of Additively Manufactured Components.”
In 29th Annual International Solid Freeform Fabrication Symposium, Vol.
29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
ieee: J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based
Design Check of Additively Manufactured Components,” in 29th Annual International
Solid Freeform Fabrication Symposium, 2018, vol. 29.
mla: Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively
Manufactured Components.” 29th Annual International Solid Freeform Fabrication
Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
short: 'J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International
Solid Freeform Fabrication Symposium, 2018.'
date_created: 2021-06-15T11:10:06Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
intvolume: ' 29'
language:
- iso: eng
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Method for a Software-based Design Check of Additively Manufactured Components
type: conference
user_id: '38077'
volume: 29
year: '2018'
...
---
_id: '22435'
abstract:
- lang: eng
text: In der Industrie entsteht aufgrund des dynamischen Wettbewerbsumfelds ein
zunehmender Drang nach verkürzten Produktentstehungszeiten, hoher Funktionsintegration
und individualisierten Produkten. Mithin erlangen additive Fertigungsverfahren
eine zunehmende industrielle Bedeutung. Das Laser-Strahlschmelzen (LBM) als additives
Verfahren ist hierbei beispielhaft hervorzuheben, da es bereits im Bereich des
Prototypenbaus und der Kleinserienfertigung ein etabliertes Verfahren ist, das
an der Schwelle zum Einsatz in der Serienproduktion steht. Entscheidendes Hemmnis
für den Einsatz der additiven Fertigungsverfahren bildet die fehlende methodische
Ausnutzung der gestalterischen Freiheiten und Randbedingungen durch die vergleichsweise
neuartige Gruppe an Fertigungsverfahren im gesamten Produktentstehungsprozess.
In der Produktentwicklung bildet die Konstruktionsmethodik einen möglichen Ansatz,
um gestalterische Freiheiten und Vorteile additiver Fertigungsverfahren bereits
in frühen Phasen der Entwicklung gezielt zu berücksichtigen. Hierfür werden aufgrund
bestehender und allgemein anerkannter Konstruktionsmethoden (z.B. VDI2221, Pahl/Beitz,
etc.) Anknüpfungspunkte aufgezeigt, die eine Implementierung, speziell des Laser-Strahlschmelzens,
ermöglichen. Besonderes Augenmerk wird in dieser Veröffentlichung auf die beiden
Konstruktionsphasen Konzeption und Gestaltung gelegt. Hierzu werden Ergänzungen
oder Anpassungen der bestehenden Konstruktionsmethoden vorgestellt. In besonderer
Weise wird dabei auf die Einbringung und die Vorteile der additiven Fertigungsverfahren
eingegangen.
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Sonja
full_name: Bücker, Sonja
last_name: Bücker
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Künneke T, Bücker S, Lieneke T, Zimmer D. Ein Beitrag zur Anpassung bestehender
Konstruktionsmethodiken an die additiven Fertigungsverfahren. In: Proceedings
of the 15th Rapid.Tech Conference. Carl Hanser Verlag GmbH & Co. KG; 2018:128-143.
doi:10.3139/9783446458123.008'
apa: Künneke, T., Bücker, S., Lieneke, T., & Zimmer, D. (2018). Ein Beitrag
zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren.
In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser
Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446458123.008
bibtex: '@inproceedings{Künneke_Bücker_Lieneke_Zimmer_2018, title={Ein Beitrag zur
Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren},
DOI={10.3139/9783446458123.008},
booktitle={Proceedings of the 15th Rapid.Tech Conference}, publisher={Carl Hanser
Verlag GmbH & Co. KG}, author={Künneke, Thomas and Bücker, Sonja and Lieneke,
Tobias and Zimmer, Detmar}, year={2018}, pages={128–143} }'
chicago: Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein
Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”
In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag
GmbH & Co. KG, 2018. https://doi.org/10.3139/9783446458123.008.
ieee: T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung
bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in
Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
mla: Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken
an Die Additiven Fertigungsverfahren.” Proceedings of the 15th Rapid.Tech Conference,
Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
short: 'T. Künneke, S. Bücker, T. Lieneke, D. Zimmer, in: Proceedings of the 15th
Rapid.Tech Conference, Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–143.'
date_created: 2021-06-15T11:10:08Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446458123.008
language:
- iso: eng
page: 128-143
publication: Proceedings of the 15th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45812-3
publisher: Carl Hanser Verlag GmbH & Co. KG
status: public
title: Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven
Fertigungsverfahren
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22436'
abstract:
- lang: eng
text: Die Additive Fertigung eröffnet neue Freiheitsgrade in der Produktentwicklung.
Unsicherheiten über die Wirtschaftlichkeit und Leistungsfähigkeit der aus der
Konstruktion ableitbaren Fertigungstechnologieketten sind zu beachten. In diesem
Beitrag wird eine Methode vorgestellt, welche die Anpassung einer bestehenden
Konstruktionsmethode berücksichtigt und eine iterative Bewertung der Konstruktionsentscheidungen
anhand von Technologieketten ermöglicht. Hiermit können die Potenziale der additiven
Fertigungstechnologien zielgerichtet realisiert werden.
author:
- first_name: Alexander
full_name: Jacob, Alexander
last_name: Jacob
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Tobias
full_name: Baumann, Tobias
last_name: Baumann
- first_name: Nicole
full_name: Stricker, Nicole
last_name: Stricker
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Gisela
full_name: Lanza, Gisela
last_name: Lanza
citation:
ama: Jacob A, Künneke T, Lieneke T, et al. Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb.
2018;113(11):742-745. doi:https://doi.org/10.3139/104.112005
apa: Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D.,
& Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für
die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
113(11), 742–745. https://doi.org/10.3139/104.112005
bibtex: '@article{Jacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title={Iterative
Produktentwicklung und Produktionsplanung für die Additive Fertigung}, volume={113},
DOI={https://doi.org/10.3139/104.112005},
number={11}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Carl
Hanser Verlag}, author={Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias
and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela},
year={2018}, pages={742–745} }'
chicago: 'Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole
Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb
113, no. 11 (2018): 742–45. https://doi.org/10.3139/104.112005.'
ieee: A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, pp. 742–745, 2018.
mla: Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
short: A. Jacob, T. Künneke, T. Lieneke, T. Baumann, N. Stricker, D. Zimmer, G.
Lanza, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113 (2018) 742–745.
date_created: 2021-06-15T11:10:09Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://doi.org/10.3139/104.112005
intvolume: ' 113'
issue: '11'
language:
- iso: eng
page: 742-745
publication: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb
publisher: Carl Hanser Verlag
status: public
title: Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung
type: journal_article
user_id: '38077'
volume: 113
year: '2018'
...
---
_id: '22506'
author:
- first_name: Uwe
full_name: Brückner, Uwe
last_name: Brückner
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Magnus Hubert
full_name: Schadomsky, Magnus Hubert
id: '11904'
last_name: Schadomsky
- first_name: Malte
full_name: Strop, Malte
last_name: Strop
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Brückner U, Künneke T, Schadomsky MH, Strop M, Zimmer D. Elektromechanische
Antriebe. Carl Hanser Verlag; 2018:247-290. doi:10.3139/9783446456198.009
apa: Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., & Zimmer, D. (2018).
Elektromechanische Antriebe (pp. 247–290). Carl Hanser Verlag. https://doi.org/10.3139/9783446456198.009
bibtex: '@book{Brückner_Künneke_Schadomsky_Strop_Zimmer_2018, title={Elektromechanische
Antriebe}, DOI={10.3139/9783446456198.009},
publisher={Carl Hanser Verlag}, author={Brückner, Uwe and Künneke, Thomas and
Schadomsky, Magnus Hubert and Strop, Malte and Zimmer, Detmar}, year={2018}, pages={247–290}
}'
chicago: Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and
Detmar Zimmer. Elektromechanische Antriebe. Carl Hanser Verlag, 2018. https://doi.org/10.3139/9783446456198.009.
ieee: U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, Elektromechanische
Antriebe. Carl Hanser Verlag, 2018, pp. 247–290.
mla: Brückner, Uwe, et al. Elektromechanische Antriebe. Carl Hanser Verlag,
2018, pp. 247–90, doi:10.3139/9783446456198.009.
short: U. Brückner, T. Künneke, M.H. Schadomsky, M. Strop, D. Zimmer, Elektromechanische
Antriebe, Carl Hanser Verlag, 2018.
date_created: 2021-06-22T13:31:43Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446456198.009
language:
- iso: eng
page: 247-290
publication_identifier:
isbn:
- 978-3-446-45619-8
publisher: Carl Hanser Verlag
status: public
title: Elektromechanische Antriebe
type: book
user_id: '38077'
year: '2018'
...
---
_id: '22987'
author:
- first_name: Simon
full_name: Drüke, Simon
last_name: Drüke
- first_name: Rainer
full_name: Bicker, Rainer
last_name: Bicker
- first_name: Bernd
full_name: Schullter, Bernd
last_name: Schullter
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Drüke S, Bicker R, Schullter B, Henke C, Trächtler A. Rotordynamic instabilities
in washing machines. In: Proceedings of the 10th International Conference on
Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics -
IFToMM. Springer Nature Switzerland AG; 2018:383-397.'
apa: Drüke, S., Bicker, R., Schullter, B., Henke, C., & Trächtler, A. (2018).
Rotordynamic instabilities in washing machines. In Proceedings of the 10th
International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference
on Rotor Dynamics - IFToMM (pp. 383–397). Springer Nature Switzerland AG.
bibtex: '@inproceedings{Drüke_Bicker_Schullter_Henke_Trächtler_2018, title={Rotordynamic
instabilities in washing machines}, booktitle={Proceedings of the 10th International
Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor
Dynamics - IFToMM}, publisher={Springer Nature Switzerland AG}, author={Drüke,
Simon and Bicker, Rainer and Schullter, Bernd and Henke, Christian and Trächtler,
Ansgar}, year={2018}, pages={383–397} }'
chicago: Drüke, Simon, Rainer Bicker, Bernd Schullter, Christian Henke, and Ansgar
Trächtler. “Rotordynamic Instabilities in Washing Machines.” In Proceedings
of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International
Conference on Rotor Dynamics - IFToMM, 383–97. Springer Nature Switzerland
AG, 2018.
ieee: S. Drüke, R. Bicker, B. Schullter, C. Henke, and A. Trächtler, “Rotordynamic
instabilities in washing machines,” in Proceedings of the 10th International
Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor
Dynamics - IFToMM, 2018, pp. 383–397.
mla: Drüke, Simon, et al. “Rotordynamic Instabilities in Washing Machines.” Proceedings
of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International
Conference on Rotor Dynamics - IFToMM, Springer Nature Switzerland AG, 2018,
pp. 383–97.
short: 'S. Drüke, R. Bicker, B. Schullter, C. Henke, A. Trächtler, in: Proceedings
of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International
Conference on Rotor Dynamics - IFToMM, Springer Nature Switzerland AG, 2018, pp.
383–397.'
date_created: 2021-08-09T05:39:54Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 383-397
publication: Proceedings of the 10th International Conference on Rotor Dynamics -
IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM
publisher: Springer Nature Switzerland AG
status: public
title: Rotordynamic instabilities in washing machines
type: conference
user_id: '24876'
year: '2018'
...
---
_id: '22988'
author:
- first_name: Manuel
full_name: Gräler, Manuel
last_name: Gräler
- first_name: Robert
full_name: Springer, Robert
last_name: Springer
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
citation:
ama: 'Gräler M, Springer R, Henke C, Trächtler A, Homberg W. Assisted setup of forming
processes: compensation of initial stochastic disturbances. Swedish Production
Symposium. 2018;25:358-364.'
apa: 'Gräler, M., Springer, R., Henke, C., Trächtler, A., & Homberg, W. (2018).
Assisted setup of forming processes: compensation of initial stochastic disturbances.
Swedish Production Symposium, 25, 358–364.'
bibtex: '@article{Gräler_Springer_Henke_Trächtler_Homberg_2018, title={Assisted
setup of forming processes: compensation of initial stochastic disturbances},
volume={25}, journal={Swedish Production Symposium}, author={Gräler, Manuel and
Springer, Robert and Henke, Christian and Trächtler, Ansgar and Homberg, Werner},
year={2018}, pages={358–364} }'
chicago: 'Gräler, Manuel, Robert Springer, Christian Henke, Ansgar Trächtler, and
Werner Homberg. “Assisted Setup of Forming Processes: Compensation of Initial
Stochastic Disturbances.” Swedish Production Symposium 25 (2018): 358–64.'
ieee: 'M. Gräler, R. Springer, C. Henke, A. Trächtler, and W. Homberg, “Assisted
setup of forming processes: compensation of initial stochastic disturbances,”
Swedish Production Symposium, vol. 25, pp. 358–364, 2018.'
mla: 'Gräler, Manuel, et al. “Assisted Setup of Forming Processes: Compensation
of Initial Stochastic Disturbances.” Swedish Production Symposium, vol.
25, 2018, pp. 358–64.'
short: M. Gräler, R. Springer, C. Henke, A. Trächtler, W. Homberg, Swedish Production
Symposium 25 (2018) 358–364.
date_created: 2021-08-09T05:39:55Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 25'
language:
- iso: eng
page: 358-364
publication: Swedish Production Symposium
status: public
title: 'Assisted setup of forming processes: compensation of initial stochastic disturbances'
type: journal_article
user_id: '24876'
volume: 25
year: '2018'
...
---
_id: '22989'
author:
- first_name: Arne Thorsten
full_name: Rüting, Arne Thorsten
last_name: Rüting
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rüting AT, Henke C, Trächtler A. Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung
auf einer Industriesteuerung. In: EKA 2018 Entwurf Komplexer Automatisierungssysteme
- Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen. IFAK - Institut
für Automation und Kommunikation e.V.; 2018.'
apa: Rüting, A. T., Henke, C., & Trächtler, A. (2018). Umsetzung einer echtzeitfähigen
Mehrgrößenoptimierung auf einer Industriesteuerung. In EKA 2018 Entwurf komplexer
Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen.
IFAK - Institut für Automation und Kommunikation e.V.
bibtex: '@inproceedings{Rüting_Henke_Trächtler_2018, title={Umsetzung einer echtzeitfähigen
Mehrgrößenoptimierung auf einer Industriesteuerung}, booktitle={EKA 2018 Entwurf
komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und
Anwendungen}, publisher={IFAK - Institut für Automation und Kommunikation e.V.},
author={Rüting, Arne Thorsten and Henke, Christian and Trächtler, Ansgar}, year={2018}
}'
chicago: Rüting, Arne Thorsten, Christian Henke, and Ansgar Trächtler. “Umsetzung
Einer Echtzeitfähigen Mehrgrößenoptimierung Auf Einer Industriesteuerung.” In
EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden,
Werkzeuge Und Anwendungen. IFAK - Institut für Automation und Kommunikation
e.V., 2018.
ieee: A. T. Rüting, C. Henke, and A. Trächtler, “Umsetzung einer echtzeitfähigen
Mehrgrößenoptimierung auf einer Industriesteuerung,” in EKA 2018 Entwurf komplexer
Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen,
2018.
mla: Rüting, Arne Thorsten, et al. “Umsetzung Einer Echtzeitfähigen Mehrgrößenoptimierung
Auf Einer Industriesteuerung.” EKA 2018 Entwurf Komplexer Automatisierungssysteme
- Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen, IFAK - Institut
für Automation und Kommunikation e.V., 2018.
short: 'A.T. Rüting, C. Henke, A. Trächtler, in: EKA 2018 Entwurf Komplexer Automatisierungssysteme
- Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen, IFAK - Institut für
Automation und Kommunikation e.V., 2018.'
date_created: 2021-08-09T05:39:57Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel,
Methoden, Werkzeuge und Anwendungen
publisher: IFAK - Institut für Automation und Kommunikation e.V.
status: public
title: Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung
type: conference
user_id: '24876'
year: '2018'
...
---
_id: '22990'
author:
- first_name: Robert
full_name: Springer, Robert
last_name: Springer
- first_name: Manuel
full_name: Graeler, Manuel
last_name: Graeler
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Springer R, Graeler M, Homberg W, Henke C, Trächtler A. Model based Setup Assistant
for Progressive Tools. AIP Conference Proceedings. 2018;160025(2018).
apa: Springer, R., Graeler, M., Homberg, W., Henke, C., & Trächtler, A. (2018).
Model based Setup Assistant for Progressive Tools. AIP Conference Proceedings,
160025(2018).
bibtex: '@article{Springer_Graeler_Homberg_Henke_Trächtler_2018, title={Model based
Setup Assistant for Progressive Tools}, volume={160025}, number={2018}, journal={AIP
Conference Proceedings}, author={Springer, Robert and Graeler, Manuel and Homberg,
Werner and Henke, Christian and Trächtler, Ansgar}, year={2018} }'
chicago: Springer, Robert, Manuel Graeler, Werner Homberg, Christian Henke, and
Ansgar Trächtler. “Model Based Setup Assistant for Progressive Tools.” AIP
Conference Proceedings 160025, no. 2018 (2018).
ieee: R. Springer, M. Graeler, W. Homberg, C. Henke, and A. Trächtler, “Model based
Setup Assistant for Progressive Tools,” AIP Conference Proceedings, vol.
160025, no. 2018, 2018.
mla: Springer, Robert, et al. “Model Based Setup Assistant for Progressive Tools.”
AIP Conference Proceedings, vol. 160025, no. 2018, 2018.
short: R. Springer, M. Graeler, W. Homberg, C. Henke, A. Trächtler, AIP Conference
Proceedings 160025 (2018).
date_created: 2021-08-09T05:39:58Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 160025'
issue: '2018'
language:
- iso: eng
publication: AIP Conference Proceedings
status: public
title: Model based Setup Assistant for Progressive Tools
type: journal_article
user_id: '24876'
volume: 160025
year: '2018'
...
---
_id: '22991'
author:
- first_name: Jonathan
full_name: Millitzer, Jonathan
last_name: Millitzer
- first_name: Dirk
full_name: Mayer, Dirk
last_name: Mayer
- first_name: Torben
full_name: Jersch, Torben
last_name: Jersch
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christoph
full_name: Tamm, Christoph
last_name: Tamm
- first_name: Christopher
full_name: Ranisch, Christopher
last_name: Ranisch
citation:
ama: 'Millitzer J, Mayer D, Jersch T, et al. Recent Developments in Hardware-in-the-Loop
Testing. In: IMAC-XXXVI Conference and Exposition on Structural Dynamics.
Vol XXXVI. Society for Experimental Mechanics, Inc.; 2018.'
apa: Millitzer, J., Mayer, D., Jersch, T., Henke, C., Michael, J., Tamm, C., &
Ranisch, C. (2018). Recent Developments in Hardware-in-the-Loop Testing. In IMAC-XXXVI
Conference and Exposition on Structural Dynamics (Vol. XXXVI). Society for
Experimental Mechanics, Inc.
bibtex: '@inproceedings{Millitzer_Mayer_Jersch_Henke_Michael_Tamm_Ranisch_2018,
title={Recent Developments in Hardware-in-the-Loop Testing}, volume={XXXVI}, booktitle={IMAC-XXXVI
Conference and Exposition on Structural Dynamics}, publisher={Society for Experimental
Mechanics, Inc.}, author={Millitzer, Jonathan and Mayer, Dirk and Jersch, Torben
and Henke, Christian and Michael, Jan and Tamm, Christoph and Ranisch, Christopher},
year={2018} }'
chicago: Millitzer, Jonathan, Dirk Mayer, Torben Jersch, Christian Henke, Jan Michael,
Christoph Tamm, and Christopher Ranisch. “Recent Developments in Hardware-in-the-Loop
Testing.” In IMAC-XXXVI Conference and Exposition on Structural Dynamics,
Vol. XXXVI. Society for Experimental Mechanics, Inc., 2018.
ieee: J. Millitzer et al., “Recent Developments in Hardware-in-the-Loop Testing,”
in IMAC-XXXVI Conference and Exposition on Structural Dynamics, 2018, vol.
XXXVI.
mla: Millitzer, Jonathan, et al. “Recent Developments in Hardware-in-the-Loop Testing.”
IMAC-XXXVI Conference and Exposition on Structural Dynamics, vol. XXXVI,
Society for Experimental Mechanics, Inc., 2018.
short: 'J. Millitzer, D. Mayer, T. Jersch, C. Henke, J. Michael, C. Tamm, C. Ranisch,
in: IMAC-XXXVI Conference and Exposition on Structural Dynamics, Society for Experimental
Mechanics, Inc., 2018.'
date_created: 2021-08-09T05:40:20Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '241'
language:
- iso: eng
publication: IMAC-XXXVI Conference and Exposition on Structural Dynamics
publisher: Society for Experimental Mechanics, Inc.
status: public
title: Recent Developments in Hardware-in-the-Loop Testing
type: conference
user_id: '24876'
volume: XXXVI
year: '2018'
...
---
_id: '22994'
author:
- first_name: Christopher
full_name: Lankeit, Christopher
last_name: Lankeit
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Lankeit C, Michael J, Henke C, Trächtler A. Holistic Requirements for Interdisciplinary
Development Processes. In: Proceedings 1st International Workshop on Learning
from Other Disciplines for Requirements Engineering. IEEE; 2018:4-7.'
apa: Lankeit, C., Michael, J., Henke, C., & Trächtler, A. (2018). Holistic Requirements
for Interdisciplinary Development Processes. In Proceedings 1st International
Workshop on Learning from other Disciplines for Requirements Engineering (pp.
4–7). IEEE.
bibtex: '@inproceedings{Lankeit_Michael_Henke_Trächtler_2018, title={Holistic Requirements
for Interdisciplinary Development Processes}, booktitle={Proceedings 1st International
Workshop on Learning from other Disciplines for Requirements Engineering}, publisher={IEEE},
author={Lankeit, Christopher and Michael, Jan and Henke, Christian and Trächtler,
Ansgar}, year={2018}, pages={4–7} }'
chicago: Lankeit, Christopher, Jan Michael, Christian Henke, and Ansgar Trächtler.
“Holistic Requirements for Interdisciplinary Development Processes.” In Proceedings
1st International Workshop on Learning from Other Disciplines for Requirements
Engineering, 4–7. IEEE, 2018.
ieee: C. Lankeit, J. Michael, C. Henke, and A. Trächtler, “Holistic Requirements
for Interdisciplinary Development Processes,” in Proceedings 1st International
Workshop on Learning from other Disciplines for Requirements Engineering,
2018, pp. 4–7.
mla: Lankeit, Christopher, et al. “Holistic Requirements for Interdisciplinary Development
Processes.” Proceedings 1st International Workshop on Learning from Other Disciplines
for Requirements Engineering, IEEE, 2018, pp. 4–7.
short: 'C. Lankeit, J. Michael, C. Henke, A. Trächtler, in: Proceedings 1st International
Workshop on Learning from Other Disciplines for Requirements Engineering, IEEE,
2018, pp. 4–7.'
date_created: 2021-08-09T05:40:24Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 4-7
publication: Proceedings 1st International Workshop on Learning from other Disciplines
for Requirements Engineering
publisher: IEEE
status: public
title: Holistic Requirements for Interdisciplinary Development Processes
type: conference
user_id: '24876'
year: '2018'
...
---
_id: '22995'
author:
- first_name: Arathi
full_name: Pai, Arathi
last_name: Pai
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Pai A, Riepold M, Trächtler A. Model-based precision position and force control
of SMA actuators with a clamping application. Mechatronics. 2018;50:303-320.
apa: Pai, A., Riepold, M., & Trächtler, A. (2018). Model-based precision position
and force control of SMA actuators with a clamping application. Mechatronics,
50, 303–320.
bibtex: '@article{Pai_Riepold_Trächtler_2018, title={Model-based precision position
and force control of SMA actuators with a clamping application}, volume={50},
journal={Mechatronics}, author={Pai, Arathi and Riepold, Markus and Trächtler,
Ansgar}, year={2018}, pages={303–320} }'
chicago: 'Pai, Arathi, Markus Riepold, and Ansgar Trächtler. “Model-Based Precision
Position and Force Control of SMA Actuators with a Clamping Application.” Mechatronics
50 (2018): 303–20.'
ieee: A. Pai, M. Riepold, and A. Trächtler, “Model-based precision position and
force control of SMA actuators with a clamping application,” Mechatronics,
vol. 50, pp. 303–320, 2018.
mla: Pai, Arathi, et al. “Model-Based Precision Position and Force Control of SMA
Actuators with a Clamping Application.” Mechatronics, vol. 50, 2018, pp.
303–20.
short: A. Pai, M. Riepold, A. Trächtler, Mechatronics 50 (2018) 303–320.
date_created: 2021-08-09T05:41:37Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 50'
language:
- iso: eng
page: 303-320
publication: Mechatronics
status: public
title: Model-based precision position and force control of SMA actuators with a clamping
application
type: journal_article
user_id: '24876'
volume: 50
year: '2018'
...
---
_id: '22998'
author:
- first_name: Jens
full_name: Holtkötter, Jens
last_name: Holtkötter
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Marcos
full_name: Bockholt, Marcos
last_name: Bockholt
- first_name: Andreas
full_name: Möhlenkamp, Andreas
last_name: Möhlenkamp
- first_name: Michael
full_name: Katter, Michael
last_name: Katter
citation:
ama: Holtkötter J, Michael J, Henke C, et al. Rapid-Control-Prototyping as part
of Model-Based Development of Heat Pump Dryers. Procedia Manufacturing.
2018;24:235–242.
apa: Holtkötter, J., Michael, J., Henke, C., Trächtler, A., Bockholt, M., Möhlenkamp,
A., & Katter, M. (2018). Rapid-Control-Prototyping as part of Model-Based
Development of Heat Pump Dryers. Procedia Manufacturing, 24, 235–242.
bibtex: '@article{Holtkötter_Michael_Henke_Trächtler_Bockholt_Möhlenkamp_Katter_2018,
title={Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump
Dryers}, volume={24}, journal={Procedia Manufacturing}, author={Holtkötter, Jens
and Michael, Jan and Henke, Christian and Trächtler, Ansgar and Bockholt, Marcos
and Möhlenkamp, Andreas and Katter, Michael}, year={2018}, pages={235–242} }'
chicago: 'Holtkötter, Jens, Jan Michael, Christian Henke, Ansgar Trächtler, Marcos
Bockholt, Andreas Möhlenkamp, and Michael Katter. “Rapid-Control-Prototyping as
Part of Model-Based Development of Heat Pump Dryers.” Procedia Manufacturing
24 (2018): 235–242.'
ieee: J. Holtkötter et al., “Rapid-Control-Prototyping as part of Model-Based
Development of Heat Pump Dryers,” Procedia Manufacturing, vol. 24, pp.
235–242, 2018.
mla: Holtkötter, Jens, et al. “Rapid-Control-Prototyping as Part of Model-Based
Development of Heat Pump Dryers.” Procedia Manufacturing, vol. 24, 2018,
pp. 235–242.
short: J. Holtkötter, J. Michael, C. Henke, A. Trächtler, M. Bockholt, A. Möhlenkamp,
M. Katter, Procedia Manufacturing 24 (2018) 235–242.
date_created: 2021-08-09T05:41:40Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 24'
language:
- iso: eng
page: 235–242
publication: Procedia Manufacturing
status: public
title: Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers
type: journal_article
user_id: '24876'
volume: 24
year: '2018'
...
---
_id: '21696'
abstract:
- lang: eng
text: Theimplementation of additive manufacturing as an industrial manufacturing
process poses extraordinary challenges to companies due to their far-reaching
differences to conventional processes. In addition to the major differences in
the production process, the pre and post process steps in particular also require
a rethinking for companies and their employees. To overcome these challenges and
specifically to assist SMEs in the integration of technologies five industrial
companies are researching together within research project "OptiAMix", funded
by the German Federal Ministry of Education and Research (BMBF) and coordinated
by the Paderborn University. This paper focuses on the development of an optimal
and standardized process chain and its implementation in a general integration
methodology. This enables the standardized integration of additivemanufacturing
in order to create a uniform understanding of the procedures and tasks within
the company for the industrial application of additive manufacturing at an early
stage as well as the full exploitation of its high potentials. Therefore, the
methodology also includes other technology-specific components such as strategic
component selection, decision support for "make or buy" and the implementation
of automated component marking.
author:
- first_name: J.
full_name: Büsching, J.
last_name: Büsching
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: A.
full_name: Kruse, A.
last_name: Kruse
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Büsching J, Lindemann C, Jahnke U, Kruse A, Koch R. Technology Integration
into Existing Companies. In: 29th Annual International Solid Freeform Fabrication
Symposium. Vol 29. ; 2018:14-31. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf'
apa: Büsching, J., Lindemann, C., Jahnke, U., Kruse, A., & Koch, R. (2018).
Technology Integration into Existing Companies. In 29th Annual International
Solid Freeform Fabrication Symposium (Vol. 29, pp. 14–31). http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf
bibtex: '@inproceedings{Büsching_Lindemann_Jahnke_Kruse_Koch_2018, title={Technology
Integration into Existing Companies}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Büsching,
J. and Lindemann, C. and Jahnke, U. and Kruse, A. and Koch, R.}, year={2018},
pages={14–31} }'
chicago: Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology
Integration into Existing Companies.” In 29th Annual International Solid Freeform
Fabrication Symposium, 29:14–31, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
ieee: J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, and R. Koch, “Technology Integration
into Existing Companies,” in 29th Annual International Solid Freeform Fabrication
Symposium, 2018, vol. 29, pp. 14–31.
mla: Büsching, J., et al. “Technology Integration into Existing Companies.” 29th
Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018,
pp. 14–31, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
short: 'J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, R. Koch, in: 29th Annual
International Solid Freeform Fabrication Symposium, 2018, pp. 14–31.'
date_created: 2021-04-21T07:38:06Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf
intvolume: ' 29'
language:
- iso: eng
page: 14-31
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Technology Integration into Existing Companies
type: conference
user_id: '55833'
volume: 29
year: '2018'
...
---
_id: '21991'
author:
- first_name: Iris
full_name: Graessler, Iris
last_name: Graessler
- first_name: Philipp
full_name: Scholle, Philipp
last_name: Scholle
- first_name: Julian
full_name: Hentze, Julian
last_name: Hentze
- first_name: Christian
full_name: Oleff, Christian
last_name: Oleff
citation:
ama: 'Graessler I, Scholle P, Hentze J, Oleff C. SEMI-AUTOMATIZED ASSESSMENT OF
REQUIREMENT INTERRELATIONS. In: Proceedings of the DESIGN 2018 15th International
Design Conference. ; 2018. doi:10.21278/idc.2018.0298'
apa: Graessler, I., Scholle, P., Hentze, J., & Oleff, C. (2018). SEMI-AUTOMATIZED
ASSESSMENT OF REQUIREMENT INTERRELATIONS. In Proceedings of the DESIGN 2018
15th International Design Conference. https://doi.org/10.21278/idc.2018.0298
bibtex: '@inproceedings{Graessler_Scholle_Hentze_Oleff_2018, title={SEMI-AUTOMATIZED
ASSESSMENT OF REQUIREMENT INTERRELATIONS}, DOI={10.21278/idc.2018.0298},
booktitle={Proceedings of the DESIGN 2018 15th International Design Conference},
author={Graessler, Iris and Scholle, Philipp and Hentze, Julian and Oleff, Christian},
year={2018} }'
chicago: Graessler, Iris, Philipp Scholle, Julian Hentze, and Christian Oleff. “SEMI-AUTOMATIZED
ASSESSMENT OF REQUIREMENT INTERRELATIONS.” In Proceedings of the DESIGN 2018
15th International Design Conference, 2018. https://doi.org/10.21278/idc.2018.0298.
ieee: I. Graessler, P. Scholle, J. Hentze, and C. Oleff, “SEMI-AUTOMATIZED ASSESSMENT
OF REQUIREMENT INTERRELATIONS,” in Proceedings of the DESIGN 2018 15th International
Design Conference, 2018.
mla: Graessler, Iris, et al. “SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS.”
Proceedings of the DESIGN 2018 15th International Design Conference, 2018,
doi:10.21278/idc.2018.0298.
short: 'I. Graessler, P. Scholle, J. Hentze, C. Oleff, in: Proceedings of the DESIGN
2018 15th International Design Conference, 2018.'
date_created: 2021-05-05T09:15:36Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '26'
- _id: '624'
- _id: '219'
doi: 10.21278/idc.2018.0298
publication: Proceedings of the DESIGN 2018 15th International Design Conference
publication_identifier:
isbn:
- '9789537738594'
publication_status: published
status: public
title: SEMI-AUTOMATIZED ASSESSMENT OF REQUIREMENT INTERRELATIONS
type: conference
user_id: '9138'
year: '2018'
...
---
_id: '21998'
abstract:
- lang: eng
text: Changing requirements have a broad impact on product development processes.
In this paper, a novel approach towards structuring requirements is proposed.
Based on a requirements list, interrelations of requirements are assessed semi-automatically
by a rule basis. Here, generic interrelations funded on either physical fundamentals
or working principles are recorded. By this approach, requirements structure matrices
are derived semi-automatically. Combined with selecting critical requirements
based on structured criterions, iterations due to changing requirements will be
reduced.
author:
- first_name: I.
full_name: Gräßler, I.
last_name: Gräßler
- first_name: P.
full_name: Scholle, P.
last_name: Scholle
- first_name: J.
full_name: Hentze, J.
last_name: Hentze
- first_name: C.
full_name: Oleff, C.
last_name: Oleff
citation:
ama: 'Gräßler I, Scholle P, Hentze J, Oleff C. Semi-Automatized Assessment of Requirement
Interrelations. In: 15th International Design Conference. Vol 15. ; 2018:S.
325-334. doi:10.21278/idc.2018.0298'
apa: Gräßler, I., Scholle, P., Hentze, J., & Oleff, C. (2018). Semi-Automatized
Assessment of Requirement Interrelations. In 15th International Design Conference
(Vol. 15, p. S. 325-334). https://doi.org/10.21278/idc.2018.0298
bibtex: '@inproceedings{Gräßler_Scholle_Hentze_Oleff_2018, title={Semi-Automatized
Assessment of Requirement Interrelations}, volume={15}, DOI={10.21278/idc.2018.0298},
booktitle={15th International Design Conference}, author={Gräßler, I. and Scholle,
P. and Hentze, J. and Oleff, C.}, year={2018}, pages={S. 325-334} }'
chicago: Gräßler, I., P. Scholle, J. Hentze, and C. Oleff. “Semi-Automatized Assessment
of Requirement Interrelations.” In 15th International Design Conference,
15:S. 325-334, 2018. https://doi.org/10.21278/idc.2018.0298.
ieee: I. Gräßler, P. Scholle, J. Hentze, and C. Oleff, “Semi-Automatized Assessment
of Requirement Interrelations,” in 15th International Design Conference,
2018, vol. 15, p. S. 325-334.
mla: Gräßler, I., et al. “Semi-Automatized Assessment of Requirement Interrelations.”
15th International Design Conference, vol. 15, 2018, p. S. 325-334, doi:10.21278/idc.2018.0298.
short: 'I. Gräßler, P. Scholle, J. Hentze, C. Oleff, in: 15th International Design
Conference, 2018, p. S. 325-334.'
date_created: 2021-05-05T09:39:24Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '26'
- _id: '624'
- _id: '219'
doi: 10.21278/idc.2018.0298
intvolume: ' 15'
page: S. 325-334
publication: 15th International Design Conference
status: public
title: Semi-Automatized Assessment of Requirement Interrelations
type: conference
user_id: '9138'
volume: 15
year: '2018'
...
---
_id: '21999'
abstract:
- lang: eng
text: 'In this paper, a novel approach towards risk classification of requirements
of additively manufactured (AM) products is presented. The classification of an
individual requirement is based on two aspects: a) influence factors implying
dynamics of its specification and b) network indices quantifying the degree of
cross-linkage with other requirements. Both aspects can indicate requirement changes.
Influences on a requirement are assessed by a priority index based on criteria
‘uncertainty’, ‘dynamics’ and ‘relevance for product development’. Effects from
other requirements are captured by network theoretical indices such as active
and passive sum. In the end, requirements are classified accord-ing to their criticality.
By this approach, requirements can be identified which might strongly affect the
product development process of AM products.'
author:
- first_name: I.
full_name: Gräßler, I.
last_name: Gräßler
- first_name: C.
full_name: Oleff, C.
last_name: Oleff
- first_name: P.
full_name: Scholle, P.
last_name: Scholle
citation:
ama: 'Gräßler I, Oleff C, Scholle P. Methode zur Bewertung von Anforderungsänderungen
additiv gefertigter Produkte. In: Design for X - Beiträge Zum 29. DfX-Symposium.
Vol 29. ; 2018:333-344. doi:https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte'
apa: Gräßler, I., Oleff, C., & Scholle, P. (2018). Methode zur Bewertung von
Anforderungsänderungen additiv gefertigter Produkte. Design for X - Beiträge
Zum 29. DfX-Symposium, 29, 333–344. https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte
bibtex: '@inproceedings{Gräßler_Oleff_Scholle_2018, title={Methode zur Bewertung
von Anforderungsänderungen additiv gefertigter Produkte}, volume={29}, DOI={https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte},
booktitle={Design for X - Beiträge zum 29. DfX-Symposium}, author={Gräßler, I.
and Oleff, C. and Scholle, P.}, year={2018}, pages={333–344} }'
chicago: Gräßler, I., C. Oleff, and P. Scholle. “Methode Zur Bewertung von Anforderungsänderungen
Additiv Gefertigter Produkte.” In Design for X - Beiträge Zum 29. DfX-Symposium,
29:333–44, 2018. https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
ieee: 'I. Gräßler, C. Oleff, and P. Scholle, “Methode zur Bewertung von Anforderungsänderungen
additiv gefertigter Produkte,” in Design for X - Beiträge zum 29. DfX-Symposium,
2018, vol. 29, pp. 333–344, doi: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.'
mla: Gräßler, I., et al. “Methode Zur Bewertung von Anforderungsänderungen Additiv
Gefertigter Produkte.” Design for X - Beiträge Zum 29. DfX-Symposium, vol.
29, 2018, pp. 333–44, doi:https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte.
short: 'I. Gräßler, C. Oleff, P. Scholle, in: Design for X - Beiträge Zum 29. DfX-Symposium,
2018, pp. 333–344.'
date_created: 2021-05-05T09:39:26Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '26'
- _id: '624'
- _id: '219'
doi: https://www.researchgate.net/publication/331742431_Methode_zur_Bewertung_von_Anforderungsanderungen_additiv_gefertigter_Produkte
intvolume: ' 29'
language:
- iso: eng
page: 333-344
publication: Design for X - Beiträge zum 29. DfX-Symposium
status: public
title: Methode zur Bewertung von Anforderungsänderungen additiv gefertigter Produkte
type: conference
user_id: '5786'
volume: 29
year: '2018'
...
---
_id: '22'
abstract:
- lang: eng
text: This paper describes a data structure and a heuristic to plan and map arbitrary
resources in complex combinations while applying time dependent constraints. The
approach is used in the planning based workload manager OpenCCS at the Paderborn
Center for Parallel Computing (PC\(^2\)) to operate heterogeneous clusters with
up to 10000 cores. We also show performance results derived from four years of
operation.
author:
- first_name: Axel
full_name: Keller, Axel
id: '15274'
last_name: Keller
citation:
ama: 'Keller A. A Data Structure for Planning Based Workload Management of Heterogeneous
HPC Systems. In: Klusáček D, Cirne W, Desai N, eds. Proc. Workshop on Job Scheduling
Strategies for Parallel Processing (JSSPP). Vol 10773. Lecture Notes in Computer
Science. Springer; 2018:132-151. doi:10.1007/978-3-319-77398-8_8'
apa: 'Keller, A. (2018). A Data Structure for Planning Based Workload Management
of Heterogeneous HPC Systems. In D. Klusáček, W. Cirne, & N. Desai (Eds.),
Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)
(Vol. 10773, pp. 132–151). Orlando, FL, USA: Springer. https://doi.org/10.1007/978-3-319-77398-8_8'
bibtex: '@inproceedings{Keller_2018, series={Lecture Notes in Computer Science},
title={A Data Structure for Planning Based Workload Management of Heterogeneous
HPC Systems}, volume={10773}, DOI={10.1007/978-3-319-77398-8_8},
booktitle={Proc. Workshop on Job Scheduling Strategies for Parallel Processing
(JSSPP)}, publisher={Springer}, author={Keller, Axel}, editor={Klusáček, D. and
Cirne, W. and Desai, N.Editors}, year={2018}, pages={132–151}, collection={Lecture
Notes in Computer Science} }'
chicago: Keller, Axel. “A Data Structure for Planning Based Workload Management
of Heterogeneous HPC Systems.” In Proc. Workshop on Job Scheduling Strategies
for Parallel Processing (JSSPP), edited by D. Klusáček, W. Cirne, and N. Desai,
10773:132–51. Lecture Notes in Computer Science. Springer, 2018. https://doi.org/10.1007/978-3-319-77398-8_8.
ieee: A. Keller, “A Data Structure for Planning Based Workload Management of Heterogeneous
HPC Systems,” in Proc. Workshop on Job Scheduling Strategies for Parallel Processing
(JSSPP), Orlando, FL, USA, 2018, vol. 10773, pp. 132–151.
mla: Keller, Axel. “A Data Structure for Planning Based Workload Management of Heterogeneous
HPC Systems.” Proc. Workshop on Job Scheduling Strategies for Parallel Processing
(JSSPP), edited by D. Klusáček et al., vol. 10773, Springer, 2018, pp. 132–51,
doi:10.1007/978-3-319-77398-8_8.
short: 'A. Keller, in: D. Klusáček, W. Cirne, N. Desai (Eds.), Proc. Workshop on
Job Scheduling Strategies for Parallel Processing (JSSPP), Springer, 2018, pp.
132–151.'
conference:
end_date: 2017-06-02
location: Orlando, FL, USA
name: 21st Workshop on Job Scheduling Strategies for Parallel Processing
start_date: 2017-06-02
date_created: 2017-07-25T14:54:08Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '27'
doi: 10.1007/978-3-319-77398-8_8
editor:
- first_name: D.
full_name: Klusáček, D.
last_name: Klusáček
- first_name: W.
full_name: Cirne, W.
last_name: Cirne
- first_name: N.
full_name: Desai, N.
last_name: Desai
intvolume: ' 10773'
keyword:
- Scheduling Planning Mapping Workload management
language:
- iso: eng
page: 132-151
publication: Proc. Workshop on Job Scheduling Strategies for Parallel Processing (JSSPP)
publication_identifier:
isbn:
- 978-3-319-77398-8
- 978-3-319-77397-1
publication_status: published
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: A Data Structure for Planning Based Workload Management of Heterogeneous HPC
Systems
type: conference
user_id: '15274'
volume: 10773
year: '2018'
...