---
_id: '22153'
author:
- first_name: B.
full_name: Bauer, B.
last_name: Bauer
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
citation:
ama: 'Bauer B, Reschetnik W, Kullmer G, Richard HA. Crack length measurement of
additive manufactured plastics based on the current potential drop method. In:
Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components.
; 2017.'
apa: Bauer, B., Reschetnik, W., Kullmer, G., & Richard, H. A. (2017). Crack
length measurement of additive manufactured plastics based on the current potential
drop method. In Symposium on Fatigue and Fracture of Additive Manufactured
Materials and Components.
bibtex: '@inproceedings{Bauer_Reschetnik_Kullmer_Richard_2017, title={Crack length
measurement of additive manufactured plastics based on the current potential drop
method.}, booktitle={Symposium on Fatigue and Fracture of Additive Manufactured
Materials and Components}, author={Bauer, B. and Reschetnik, W. and Kullmer, G.
and Richard, H.A.}, year={2017} }'
chicago: Bauer, B., W. Reschetnik, G. Kullmer, and H.A. Richard. “Crack Length Measurement
of Additive Manufactured Plastics Based on the Current Potential Drop Method.”
In Symposium on Fatigue and Fracture of Additive Manufactured Materials and
Components, 2017.
ieee: B. Bauer, W. Reschetnik, G. Kullmer, and H. A. Richard, “Crack length measurement
of additive manufactured plastics based on the current potential drop method.,”
in Symposium on Fatigue and Fracture of Additive Manufactured Materials and
Components, 2017.
mla: Bauer, B., et al. “Crack Length Measurement of Additive Manufactured Plastics
Based on the Current Potential Drop Method.” Symposium on Fatigue and Fracture
of Additive Manufactured Materials and Components, 2017.
short: 'B. Bauer, W. Reschetnik, G. Kullmer, H.A. Richard, in: Symposium on Fatigue
and Fracture of Additive Manufactured Materials and Components, 2017.'
date_created: 2021-05-11T07:48:45Z
date_updated: 2022-01-06T06:55:27Z
department:
- _id: '143'
- _id: '219'
publication: Symposium on Fatigue and Fracture of Additive Manufactured Materials
and Components
status: public
title: Crack length measurement of additive manufactured plastics based on the current
potential drop method.
type: conference
user_id: '60486'
year: '2017'
...
---
_id: '22165'
abstract:
- lang: eng
text: FeMn-Ag alloys as potential bioresorbable implant materials were prepared
by selective laser melting (SLM) from mixed powders of FeMn and Ag. The microstructure
of the samples is characterized by presence of few micrometers to several tens
of micrometer large Ag-phases within the FeMn matrix. The microstructure dependent
corrosion and biomineralization processes in simulated body fluid (SBF) were studied
in-situ by means of electrochemical impedance spectroscopy (EIS). The microstructure
and local surface film formation were analyzed by electron microscopy (FE-SEM)
and Raman microscopy. The results clearly show that the Ag-phase acts as a local
cathode within the FeMn matrix. However, surface film formation is observed both
for the Ag- and the FeMn-phases, which potentially lowers the self-corrosion as
well as the galvanic coupling of the two phases. The formation of AgCl on the
Ag-phases and mixed metal phosphates on the FeMn-phases can be observed by local
Raman spectroscopic analysis in combination with FE-SEM characterization.
author:
- first_name: M.
full_name: Wiesener, M.
last_name: Wiesener
- first_name: K.
full_name: Peters, K.
last_name: Peters
- first_name: A.
full_name: Taube, A.
last_name: Taube
- first_name: A.
full_name: Keller, A.
last_name: Keller
- first_name: K.P.
full_name: Hoyer, K.P.
last_name: Hoyer
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
- first_name: G.
full_name: Grundmeier, G.
last_name: Grundmeier
citation:
ama: Wiesener M, Peters K, Taube A, et al. Corrosion properties of bioresorbable
FeMn-Ag alloys prepared by selective laser melting. Materials and Corrosion.
2017;68(10):1028-1036. doi:10.1002/maco.201709478
apa: Wiesener, M., Peters, K., Taube, A., Keller, A., Hoyer, K. P., Niendorf, T.,
& Grundmeier, G. (2017). Corrosion properties of bioresorbable FeMn-Ag alloys
prepared by selective laser melting. Materials and Corrosion, 68(10),
1028–1036. https://doi.org/10.1002/maco.201709478
bibtex: '@article{Wiesener_Peters_Taube_Keller_Hoyer_Niendorf_Grundmeier_2017, title={Corrosion
properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting},
volume={68}, DOI={10.1002/maco.201709478},
number={10}, journal={Materials and Corrosion}, author={Wiesener, M. and Peters,
K. and Taube, A. and Keller, A. and Hoyer, K.P. and Niendorf, T. and Grundmeier,
G.}, year={2017}, pages={1028–1036} }'
chicago: 'Wiesener, M., K. Peters, A. Taube, A. Keller, K.P. Hoyer, T. Niendorf,
and G. Grundmeier. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared
by Selective Laser Melting.” Materials and Corrosion 68, no. 10 (2017):
1028–36. https://doi.org/10.1002/maco.201709478.'
ieee: M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag
alloys prepared by selective laser melting,” Materials and Corrosion, vol.
68, no. 10, pp. 1028–1036, 2017.
mla: Wiesener, M., et al. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys
Prepared by Selective Laser Melting.” Materials and Corrosion, vol. 68,
no. 10, 2017, pp. 1028–36, doi:10.1002/maco.201709478.
short: M. Wiesener, K. Peters, A. Taube, A. Keller, K.P. Hoyer, T. Niendorf, G.
Grundmeier, Materials and Corrosion 68 (2017) 1028–1036.
date_created: 2021-05-14T07:45:52Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '624'
- _id: '219'
doi: 10.1002/maco.201709478
intvolume: ' 68'
issue: '10'
language:
- iso: eng
page: 1028-1036
publication: Materials and Corrosion
status: public
title: Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective
laser melting
type: journal_article
user_id: '71545'
volume: 68
year: '2017'
...
---
_id: '22195'
abstract:
- lang: eng
text: 'Polymer laser sintering (LS) is an important additive manufacturing (AM)
technology. Individual and complex parts are directly produced from CAD data without
the need of specific tools. The raw material is a polymer powder, which is deposited
layerwise and melted selectively with a laser. Built parts are embedded in residual
unmolten powder, the so-called part cake, which undergoes thermal ageing effects
due to the exposure to high temperatures for long times during the manufacturing
process. Hence, the recyclability of the unmolten powder is limited. This article
focuses on a fundamental analysis of the ageing kinetics dependent on time, temperature,
and oxygen content in the gas atmosphere. A model is developed and applied to
measured, position-dependent process temperature histories to successfully predict
the ageing distribution within a part cake. The results can be used to optimize
the thermal process management in LS and to develop new efficient powder recycling
methods. '
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: Josupeit S, Schmid H-J. Experimental analysis and modeling of local ageing
effects during laser sintering of polyamide 12 in regard to individual thermal
histories. Journal of Applied Polymer Science. 2017;134(42). doi:10.1002/app.45435
apa: Josupeit, S., & Schmid, H.-J. (2017). Experimental analysis and modeling
of local ageing effects during laser sintering of polyamide 12 in regard to individual
thermal histories. Journal of Applied Polymer Science, 134(42).
https://doi.org/10.1002/app.45435
bibtex: '@article{Josupeit_Schmid_2017, title={Experimental analysis and modeling
of local ageing effects during laser sintering of polyamide 12 in regard to individual
thermal histories}, volume={134}, DOI={10.1002/app.45435},
number={42}, journal={Journal of Applied Polymer Science}, publisher={Wiley},
author={Josupeit, Stefan and Schmid, Hans-Joachim}, year={2017} }'
chicago: Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling
of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual
Thermal Histories.” Journal of Applied Polymer Science 134, no. 42 (2017).
https://doi.org/10.1002/app.45435.
ieee: S. Josupeit and H.-J. Schmid, “Experimental analysis and modeling of local
ageing effects during laser sintering of polyamide 12 in regard to individual
thermal histories,” Journal of Applied Polymer Science, vol. 134, no. 42,
2017.
mla: Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling
of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual
Thermal Histories.” Journal of Applied Polymer Science, vol. 134, no. 42,
Wiley, 2017, doi:10.1002/app.45435.
short: S. Josupeit, H.-J. Schmid, Journal of Applied Polymer Science 134 (2017).
date_created: 2021-05-14T07:46:27Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1002/app.45435
intvolume: ' 134'
issue: '42'
language:
- iso: eng
publication: Journal of Applied Polymer Science
publisher: Wiley
status: public
title: Experimental analysis and modeling of local ageing effects during laser sintering
of polyamide 12 in regard to individual thermal histories
type: journal_article
user_id: '71545'
volume: 134
year: '2017'
...
---
_id: '22419'
abstract:
- lang: eng
text: Schwingungen und Vibrationen sind in Technik und Alltag häufig anzutreffen.
Meist sind sie unerwünscht und müssen durch Dämpfung reduziert werden. Hierzu
werden aktuell häufig zusätzlich zu montierende Dämpfungselemente eingesetzt.
Diese sind durch zusätzlichen Montageaufwand und erhöhte Kosten gekennzeichnet.
Durch die zusätzliche Masse wird Leichtbauansätzen widersprochen. Additive Fertigungsverfahren
bieten große Freiheiten in der Bauteilgestaltung. Dies ermöglicht ein hohes Maß
an Funktionsintegration. So ergeben sich auch im Bereich der Schwingungsdämpfung
Möglichkeiten zur gezielten Integration von Dämpfungsfunktionen durch die Eigenschaften
der additiven Fertigungsverfahren. Mittels der pulverbasierten Verfahren kann
disperses Stützmaterial innerhalb von Hohlräumen in der Struktur belassen werden.
Dieses Pulvermaterial kann als Partikeldämpfer fungieren. Durch die Freiheiten
in der Bauteilgestalt kann die Dämpfungswirkung über die geometrischen Merkmale
der Hohlräume gezielt eingestellt werden. Im Rahmen dieses Beitrags werden speziell
Untersuchungen zur Dämpfungswirkung additiv gefertigter Bauteile bei freien Biegeschwingungen
betrachtet. Die praxisnahe Umsetzung zur Funktionsintegration von Dämpfungsstrukturen
erfolgt am Beispiel der Ankerscheibe einer Federkraftbremse. Hier kann durch die
additive Fertigung verbunden mit der Funktionsintegration von Partikeldämpfern
eine Reduzierung der Schallabstrahlung für den Schaltvorgang der Bremse erreicht
werden.
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Künneke T, Zimmer D. Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen
Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH; 2017:61-74. doi:10.1007/978-3-658-17780-5
apa: Künneke, T., & Zimmer, D. (2017). Funktionsintegration additiv gefertigter
Dämpfungsstrukturen bei Biegeschwingungen (pp. 61–74). Springer Fachmedien
Wiesbaden GmbH. https://doi.org/10.1007/978-3-658-17780-5
bibtex: '@book{Künneke_Zimmer_2017, title={Funktionsintegration additiv gefertigter
Dämpfungsstrukturen bei Biegeschwingungen}, DOI={10.1007/978-3-658-17780-5},
publisher={Springer Fachmedien Wiesbaden GmbH}, author={Künneke, Thomas and Zimmer,
Detmar}, year={2017}, pages={61–74} }'
chicago: Künneke, Thomas, and Detmar Zimmer. Funktionsintegration Additiv Gefertigter
Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH,
2017. https://doi.org/10.1007/978-3-658-17780-5.
ieee: T. Künneke and D. Zimmer, Funktionsintegration additiv gefertigter Dämpfungsstrukturen
bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74.
mla: Künneke, Thomas, and Detmar Zimmer. Funktionsintegration Additiv Gefertigter
Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH,
2017, pp. 61–74, doi:10.1007/978-3-658-17780-5.
short: T. Künneke, D. Zimmer, Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen
Bei Biegeschwingungen, Springer Fachmedien Wiesbaden GmbH, 2017.
date_created: 2021-06-15T11:09:49Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1007/978-3-658-17780-5
language:
- iso: eng
page: 61-74
publication_identifier:
isbn:
- 978-3-658-17780-5
publisher: Springer Fachmedien Wiesbaden GmbH
status: public
title: Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen
type: book
user_id: '38077'
year: '2017'
...
---
_id: '22420'
abstract:
- lang: eng
text: 'Additive Fertigungsverfahren (engl.: Additive Manufacturing, kurz: AM) ermöglichen
die werkzeuglose Herstellung von Komponenten und kompletten Baugruppen direkt
aus dem 3D-CAD-Modell. Insbesondere additiv hergestellte Leichtbaukonstruktionen
weisen ein hohes Potential für den Elektromaschinenbau auf. In diesem Paper werden
erste Ansätze zur additiven Fertigung einer Rotorwelle für eine permanentmagneterregte
Synchronmaschine (PMSM) aufgezeigt. Die Verbesserung einer ausgeprägten Leichtbaukonstruktion
der Rotorwelle sowie die Charakterisierung des additiv verarbeiteten Werkstoffs
werden aufgeführt. Hierzu wurden Prüfkörper aus dem Werkstoffs H13 (1.2344) hergestellt.
Des Weiteren wurden Prüfkörper additiv gefertigter Gitterstrukturen entwickelt
und untersucht. Zur Werkstoffcharakterisierung wurden sowohl mechanische Eigenschaften
ermittelt, wie die Streckgrenze, die Zugfestigkeit und die Härte als auch elektromagnetische
Eigenschaften, wie die Koerzitivfeldstärke, die elektrische Leitfähigkeit und
die Permeabilität. Die Ergebnisse zeigen, dass die magnetischen Eigenschaften
von H13 durch eine angeschlossene Wärmebehandlung deutlich verbessert werden konnten.
Im Anschluss an die Werkstoffcharakterisierung wurde ein innovatives Leichtbau-Rotorwellenkonzept
mit internen Gitterstrukturen entwickelt. Verglichen mit einem konventionell gefertigten
Rotor konnte die Rotormasse um 25% reduziert werden sowie das Massenträgheitsmoment
um 23% reduziert werden bei einer Testdrehzahl von 3000 U/min und einem Drehmoment
von 71,98 Nm.'
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Francesco
full_name: Quattrone, Francesco
last_name: Quattrone
- first_name: Rafael
full_name: Mrozek, Rafael
last_name: Mrozek
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
last_name: Schmid
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Michael
full_name: Hoffmann, Michael
last_name: Hoffmann
citation:
ama: 'Lammers S, Quattrone F, Mrozek R, et al. Entwicklung und additive Herstellung
einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In:
Proceedings of the 14th Rapid.Tech Conference. Hanser Verlag; 2017:80-93.
doi:10.3139/9783446454606.006'
apa: Lammers, S., Quattrone, F., Mrozek, R., Zimmer, D., Schmid, H.-J., Ponick,
B., & Hoffmann, M. (2017). Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle
für eine permanentmagneterregte Synchronmaschine. In Proceedings of the 14th
Rapid.Tech Conference (pp. 80–93). Hanser Verlag. https://doi.org/10.3139/9783446454606.006
bibtex: '@inproceedings{Lammers_Quattrone_Mrozek_Zimmer_Schmid_Ponick_Hoffmann_2017,
title={Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine
permanentmagneterregte Synchronmaschine}, DOI={10.3139/9783446454606.006},
booktitle={Proceedings of the 14th Rapid.Tech Conference}, publisher={Hanser Verlag},
author={Lammers, Stefan and Quattrone, Francesco and Mrozek, Rafael and Zimmer,
Detmar and Schmid, Hans-Joachim and Ponick, Bernd and Hoffmann, Michael}, year={2017},
pages={80–93} }'
chicago: Lammers, Stefan, Francesco Quattrone, Rafael Mrozek, Detmar Zimmer, Hans-Joachim
Schmid, Bernd Ponick, and Michael Hoffmann. “Entwicklung Und Additive Herstellung
Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.”
In Proceedings of the 14th Rapid.Tech Conference, 80–93. Hanser Verlag,
2017. https://doi.org/10.3139/9783446454606.006.
ieee: S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle
für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th
Rapid.Tech Conference, 2017, pp. 80–93.
mla: Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle
Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th
Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006.
short: 'S. Lammers, F. Quattrone, R. Mrozek, D. Zimmer, H.-J. Schmid, B. Ponick,
M. Hoffmann, in: Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag,
2017, pp. 80–93.'
date_created: 2021-06-15T11:09:50Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446454606.006
language:
- iso: eng
page: 80-93
publication: Proceedings of the 14th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45459-0
publisher: Hanser Verlag
status: public
title: Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte
Synchronmaschine
type: conference
user_id: '38077'
year: '2017'
...
---
_id: '22421'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Adam G, Josupeit S, Delfs P, Zimmer D. Maßtoleranzen für die additive
Fertigung: Experimentelle Untersuchungen für das Lasersintern. In: Proceedings
of the 14th Rapid.Tech Conference. Hanser Verlag; 2017:327-344. doi:10.3139/9783446454606.024 '
apa: 'Lieneke, T., Adam, G., Josupeit, S., Delfs, P., & Zimmer, D. (2017). Maßtoleranzen
für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern.
In Proceedings of the 14th Rapid.Tech Conference (pp. 327–344). Hanser
Verlag. https://doi.org/10.3139/9783446454606.024
'
bibtex: '@inproceedings{Lieneke_Adam_Josupeit_Delfs_Zimmer_2017, title={Maßtoleranzen
für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern},
DOI={10.3139/9783446454606.024
}, booktitle={Proceedings of the 14th Rapid.Tech Conference}, publisher={Hanser
Verlag}, author={Lieneke, Tobias and Adam, Guido and Josupeit, Stefan and Delfs,
Patrick and Zimmer, Detmar}, year={2017}, pages={327–344} }'
chicago: 'Lieneke, Tobias, Guido Adam, Stefan Josupeit, Patrick Delfs, and Detmar
Zimmer. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen
Für Das Lasersintern.” In Proceedings of the 14th Rapid.Tech Conference,
327–44. Hanser Verlag, 2017. https://doi.org/10.3139/9783446454606.024 .'
ieee: 'T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen
für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,”
in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.'
mla: 'Lieneke, Tobias, et al. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle
Untersuchungen Für Das Lasersintern.” Proceedings of the 14th Rapid.Tech Conference,
Hanser Verlag, 2017, pp. 327–44, doi:10.3139/9783446454606.024 .'
short: 'T. Lieneke, G. Adam, S. Josupeit, P. Delfs, D. Zimmer, in: Proceedings of
the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–344.'
date_created: 2021-06-15T11:09:51Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '150'
doi: '10.3139/9783446454606.024 '
language:
- iso: eng
page: 327-344
publication: Proceedings of the 14th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45460-6
publisher: Hanser Verlag
status: public
title: 'Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für
das Lasersintern'
type: conference
user_id: '38077'
year: '2017'
...
---
_id: '22422'
author:
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
citation:
ama: 'Knoop F, Lieneke T. Dimensional Tolerances for Additive Manufacturing: Fused
Deposition Modeling. In: Inside 3D Printing 2017. ; 2017.'
apa: 'Knoop, F., & Lieneke, T. (2017). Dimensional Tolerances for Additive Manufacturing:
Fused Deposition Modeling. In Inside 3D Printing 2017.'
bibtex: '@inproceedings{Knoop_Lieneke_2017, title={Dimensional Tolerances for Additive
Manufacturing: Fused Deposition Modeling}, booktitle={Inside 3D Printing 2017},
author={Knoop, Frederick and Lieneke, Tobias}, year={2017} }'
chicago: 'Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive
Manufacturing: Fused Deposition Modeling.” In Inside 3D Printing 2017,
2017.'
ieee: 'F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing:
Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.'
mla: 'Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive
Manufacturing: Fused Deposition Modeling.” Inside 3D Printing 2017, 2017.'
short: 'F. Knoop, T. Lieneke, in: Inside 3D Printing 2017, 2017.'
date_created: 2021-06-15T11:09:52Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
language:
- iso: eng
publication: Inside 3D Printing 2017
status: public
title: 'Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling'
type: conference
user_id: '38077'
year: '2017'
...
---
_id: '22425'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Vera
full_name: Denzer, Vera
last_name: Denzer
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Denzer V, Zimmer D. Geometrische Toleranzen für additive Fertigungsverfahren.
In: 3. Summer School Toleranzmangement 2017. Vol 3. ; 2017.'
apa: Lieneke, T., Denzer, V., & Zimmer, D. (2017). Geometrische Toleranzen für
additive Fertigungsverfahren. In 3. Summer School Toleranzmangement 2017
(Vol. 3).
bibtex: '@inproceedings{Lieneke_Denzer_Zimmer_2017, title={Geometrische Toleranzen
für additive Fertigungsverfahren}, volume={3}, booktitle={3. Summer School Toleranzmangement
2017}, author={Lieneke, Tobias and Denzer, Vera and Zimmer, Detmar}, year={2017}
}'
chicago: Lieneke, Tobias, Vera Denzer, and Detmar Zimmer. “Geometrische Toleranzen
Für Additive Fertigungsverfahren.” In 3. Summer School Toleranzmangement 2017,
Vol. 3, 2017.
ieee: T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive
Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017,
vol. 3.
mla: Lieneke, Tobias, et al. “Geometrische Toleranzen Für Additive Fertigungsverfahren.”
3. Summer School Toleranzmangement 2017, vol. 3, 2017.
short: 'T. Lieneke, V. Denzer, D. Zimmer, in: 3. Summer School Toleranzmangement
2017, 2017.'
date_created: 2021-06-15T11:09:56Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
intvolume: ' 3'
language:
- iso: eng
publication: 3. Summer School Toleranzmangement 2017
status: public
title: Geometrische Toleranzen für additive Fertigungsverfahren
type: conference
user_id: '38077'
volume: 3
year: '2017'
...
---
_id: '22426'
abstract:
- lang: eng
text: Der Serieneinsatz der additiven Fertigung ist maßgeblich durch die hohen Kosten
und der geringen Produktivität der Verfahren limitiert. Der hier vorgestellte
Ansatz zeigt, wie die Wirtschaftlichkeit des Laser-Strahlschmelzens (LBM) durch
die Kombination mit etablierten Fertigungsverfahren erhöht werden kann. Ziel ist
es, nur solche Funktionsträger additiv zu fertigen, die einen höheren Kundennutzen
bringen. Dazu werden Konstruktionsrichtlinien definiert, Prozessketten erarbeitet
und eine Qualitätssicherung mittels Ultraschallüberwachung realisiert.
author:
- first_name: Niclas
full_name: Eschner, Niclas
last_name: Eschner
- first_name: Robin
full_name: Kopf, Robin
last_name: Kopf
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Dietrich
full_name: Berger, Dietrich
last_name: Berger
- first_name: Benjamin
full_name: Häfner, Benjamin
last_name: Häfner
- first_name: Gisela
full_name: Lanza, Gisela
last_name: Lanza
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Eschner N, Kopf R, Lieneke T, et al. Kombination etablierter und additiver
Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die
Kombination mit etablierten Fertigungsverfahren in einer Prozesskette. ZWF
Zeitschrift für wirtschaftlichen Fabrikbetrieb. 2017;112(7-8):469-472. doi:10.3139/104.111751'
apa: 'Eschner, N., Kopf, R., Lieneke, T., Künneke, T., Berger, D., Häfner, B., …
Zimmer, D. (2017). Kombination etablierter und additiver Fertigung: Wirtschaftlicher
Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten
Fertigungsverfahren in einer Prozesskette. ZWF Zeitschrift Für Wirtschaftlichen
Fabrikbetrieb, 112(7–8), 469–472. https://doi.org/10.3139/104.111751'
bibtex: '@article{Eschner_Kopf_Lieneke_Künneke_Berger_Häfner_Lanza_Zimmer_2017,
title={Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz
des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren
in einer Prozesskette}, volume={112}, DOI={10.3139/104.111751},
number={7–8}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={De
Gruyter}, author={Eschner, Niclas and Kopf, Robin and Lieneke, Tobias and Künneke,
Thomas and Berger, Dietrich and Häfner, Benjamin and Lanza, Gisela and Zimmer,
Detmar}, year={2017}, pages={469–472} }'
chicago: 'Eschner, Niclas, Robin Kopf, Tobias Lieneke, Thomas Künneke, Dietrich
Berger, Benjamin Häfner, Gisela Lanza, and Detmar Zimmer. “Kombination Etablierter
Und Additiver Fertigung: Wirtschaftlicher Einsatz Des Laser-Strahlschmelzens (LBM)
Durch Die Kombination Mit Etablierten Fertigungsverfahren in Einer Prozesskette.”
ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 112, no. 7–8 (2017):
469–72. https://doi.org/10.3139/104.111751.'
ieee: 'N. Eschner et al., “Kombination etablierter und additiver Fertigung:
Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination
mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift
für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.'
mla: 'Eschner, Niclas, et al. “Kombination Etablierter Und Additiver Fertigung:
Wirtschaftlicher Einsatz Des Laser-Strahlschmelzens (LBM) Durch Die Kombination
Mit Etablierten Fertigungsverfahren in Einer Prozesskette.” ZWF Zeitschrift
Für Wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, De Gruyter, 2017, pp.
469–72, doi:10.3139/104.111751.'
short: N. Eschner, R. Kopf, T. Lieneke, T. Künneke, D. Berger, B. Häfner, G. Lanza,
D. Zimmer, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 112 (2017) 469–472.
date_created: 2021-06-15T11:09:57Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/104.111751
intvolume: ' 112'
issue: 7-8
language:
- iso: eng
page: 469-472
publication: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb
publication_identifier:
isbn:
- 2511-0896
publisher: De Gruyter
status: public
title: 'Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz
des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren
in einer Prozesskette'
type: journal_article
user_id: '38077'
volume: 112
year: '2017'
...
---
_id: '23001'
author:
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christopher
full_name: Lankeit, Christopher
last_name: Lankeit
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Henke C, Michael J, Lankeit C, Trächtler A. Virtuelle Inbetriebnahme eines
Fertigungszentrums. In: Tag Des System Engineering. Gesellschaft für Systems
Engineering e.V.; 2017:45-54.'
apa: Henke, C., Michael, J., Lankeit, C., & Trächtler, A. (2017). Virtuelle
Inbetriebnahme eines Fertigungszentrums. In Tag des System Engineering
(pp. 45–54). Gesellschaft für Systems Engineering e.V.
bibtex: '@inproceedings{Henke_Michael_Lankeit_Trächtler_2017, title={Virtuelle Inbetriebnahme
eines Fertigungszentrums}, booktitle={Tag des System Engineering}, publisher={Gesellschaft
für Systems Engineering e.V.}, author={Henke, Christian and Michael, Jan and Lankeit,
Christopher and Trächtler, Ansgar}, year={2017}, pages={45–54} }'
chicago: Henke, Christian, Jan Michael, Christopher Lankeit, and Ansgar Trächtler.
“Virtuelle Inbetriebnahme Eines Fertigungszentrums.” In Tag Des System Engineering,
45–54. Gesellschaft für Systems Engineering e.V., 2017.
ieee: C. Henke, J. Michael, C. Lankeit, and A. Trächtler, “Virtuelle Inbetriebnahme
eines Fertigungszentrums,” in Tag des System Engineering, 2017, pp. 45–54.
mla: Henke, Christian, et al. “Virtuelle Inbetriebnahme Eines Fertigungszentrums.”
Tag Des System Engineering, Gesellschaft für Systems Engineering e.V.,
2017, pp. 45–54.
short: 'C. Henke, J. Michael, C. Lankeit, A. Trächtler, in: Tag Des System Engineering,
Gesellschaft für Systems Engineering e.V., 2017, pp. 45–54.'
date_created: 2021-08-09T05:50:06Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 45-54
publication: Tag des System Engineering
publisher: Gesellschaft für Systems Engineering e.V.
status: public
title: Virtuelle Inbetriebnahme eines Fertigungszentrums
type: conference
user_id: '24876'
year: '2017'
...
---
_id: '23002'
author:
- first_name: Jens
full_name: Holtkötter, Jens
last_name: Holtkötter
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
citation:
ama: 'Holtkötter J, Michael J, Henke C. Systematische Inbetriebnahme einer Prüfeinrichtung
für Zugversuche. In: Virtuelle Instrumente in Der Praxis 2017. Vol 22.
VDE VERLAG; 2017:62-65.'
apa: Holtkötter, J., Michael, J., & Henke, C. (2017). Systematische Inbetriebnahme
einer Prüfeinrichtung für Zugversuche. In Virtuelle Instrumente in der Praxis
2017 (Vol. 22, pp. 62–65). VDE VERLAG.
bibtex: '@inproceedings{Holtkötter_Michael_Henke_2017, title={Systematische Inbetriebnahme
einer Prüfeinrichtung für Zugversuche}, volume={22}, booktitle={Virtuelle Instrumente
in der Praxis 2017}, publisher={VDE VERLAG}, author={Holtkötter, Jens and Michael,
Jan and Henke, Christian}, year={2017}, pages={62–65} }'
chicago: Holtkötter, Jens, Jan Michael, and Christian Henke. “Systematische Inbetriebnahme
Einer Prüfeinrichtung Für Zugversuche.” In Virtuelle Instrumente in Der Praxis
2017, 22:62–65. VDE VERLAG, 2017.
ieee: J. Holtkötter, J. Michael, and C. Henke, “Systematische Inbetriebnahme einer
Prüfeinrichtung für Zugversuche,” in Virtuelle Instrumente in der Praxis 2017,
2017, vol. 22, pp. 62–65.
mla: Holtkötter, Jens, et al. “Systematische Inbetriebnahme Einer Prüfeinrichtung
Für Zugversuche.” Virtuelle Instrumente in Der Praxis 2017, vol. 22, VDE
VERLAG, 2017, pp. 62–65.
short: 'J. Holtkötter, J. Michael, C. Henke, in: Virtuelle Instrumente in Der Praxis
2017, VDE VERLAG, 2017, pp. 62–65.'
date_created: 2021-08-09T05:50:07Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '241'
intvolume: ' 22'
language:
- iso: eng
page: 62-65
publication: Virtuelle Instrumente in der Praxis 2017
publisher: VDE VERLAG
status: public
title: Systematische Inbetriebnahme einer Prüfeinrichtung für Zugversuche
type: conference
user_id: '24876'
volume: 22
year: '2017'
...
---
_id: '23008'
author:
- first_name: Martin
full_name: Krüger, Martin
last_name: Krüger
- first_name: Michael
full_name: Borsig, Michael
last_name: Borsig
- first_name: Ulf-Hendrik
full_name: Damerow, Ulf-Hendrik
last_name: Damerow
- first_name: Manuel
full_name: Gräler, Manuel
last_name: Gräler
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Krüger M, Borsig M, Damerow U-H, Gräler M, Trächtler A. Model-Based Design
of Self-Correcting Forming Processes. In: Math for the Digital Factory.
Mathematics in Industry. Springer International Publishing; 2017:273-288.'
apa: Krüger, M., Borsig, M., Damerow, U.-H., Gräler, M., & Trächtler, A. (2017).
Model-Based Design of Self-Correcting Forming Processes. In Math for the Digital
Factory (pp. 273–288). Springer International Publishing.
bibtex: '@inbook{Krüger_Borsig_Damerow_Gräler_Trächtler_2017, series={Mathematics
in Industry}, title={Model-Based Design of Self-Correcting Forming Processes},
booktitle={Math for the Digital Factory}, publisher={Springer International Publishing},
author={Krüger, Martin and Borsig, Michael and Damerow, Ulf-Hendrik and Gräler,
Manuel and Trächtler, Ansgar}, year={2017}, pages={273–288}, collection={Mathematics
in Industry} }'
chicago: Krüger, Martin, Michael Borsig, Ulf-Hendrik Damerow, Manuel Gräler, and
Ansgar Trächtler. “Model-Based Design of Self-Correcting Forming Processes.” In
Math for the Digital Factory, 273–88. Mathematics in Industry. Springer
International Publishing, 2017.
ieee: M. Krüger, M. Borsig, U.-H. Damerow, M. Gräler, and A. Trächtler, “Model-Based
Design of Self-Correcting Forming Processes,” in Math for the Digital Factory,
Springer International Publishing, 2017, pp. 273–288.
mla: Krüger, Martin, et al. “Model-Based Design of Self-Correcting Forming Processes.”
Math for the Digital Factory, Springer International Publishing, 2017,
pp. 273–88.
short: 'M. Krüger, M. Borsig, U.-H. Damerow, M. Gräler, A. Trächtler, in: Math for
the Digital Factory, Springer International Publishing, 2017, pp. 273–288.'
date_created: 2021-08-09T05:50:14Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 273-288
publication: Math for the Digital Factory
publisher: Springer International Publishing
series_title: Mathematics in Industry
status: public
title: Model-Based Design of Self-Correcting Forming Processes
type: book_chapter
user_id: '24876'
year: '2017'
...
---
_id: '23011'
author:
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christopher
full_name: Lankeit, Christopher
last_name: Lankeit
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Henke C, Michael J, Lankeit C, Trächtler A. A Holistic Approach for Virtual
Commissioning of Intelligent Systems. In: Systems Conference 2017. IEEE;
2017.'
apa: Henke, C., Michael, J., Lankeit, C., & Trächtler, A. (2017). A Holistic
Approach for Virtual Commissioning of Intelligent Systems. In Systems Conference
2017. IEEE.
bibtex: '@inproceedings{Henke_Michael_Lankeit_Trächtler_2017, title={A Holistic
Approach for Virtual Commissioning of Intelligent Systems}, booktitle={Systems
Conference 2017}, publisher={IEEE}, author={Henke, Christian and Michael, Jan
and Lankeit, Christopher and Trächtler, Ansgar}, year={2017} }'
chicago: Henke, Christian, Jan Michael, Christopher Lankeit, and Ansgar Trächtler.
“A Holistic Approach for Virtual Commissioning of Intelligent Systems.” In Systems
Conference 2017. IEEE, 2017.
ieee: C. Henke, J. Michael, C. Lankeit, and A. Trächtler, “A Holistic Approach for
Virtual Commissioning of Intelligent Systems,” in Systems Conference 2017,
2017.
mla: Henke, Christian, et al. “A Holistic Approach for Virtual Commissioning of
Intelligent Systems.” Systems Conference 2017, IEEE, 2017.
short: 'C. Henke, J. Michael, C. Lankeit, A. Trächtler, in: Systems Conference 2017,
IEEE, 2017.'
date_created: 2021-08-09T05:50:18Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: Systems Conference 2017
publisher: IEEE
status: public
title: A Holistic Approach for Virtual Commissioning of Intelligent Systems
type: conference
user_id: '24876'
year: '2017'
...
---
_id: '23012'
author:
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Alina
full_name: Hellweg, Alina
last_name: Hellweg
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Michael J, Hellweg A, Henke C, Trächtler A. Dynamische Prozessplanung im Smart
Home auf Basis von Mutliagentensystemen. In: Fachtagung Mechatronik 2017.
Vol 12. VDI Mechatronik; 2017:18-23.'
apa: Michael, J., Hellweg, A., Henke, C., & Trächtler, A. (2017). Dynamische
Prozessplanung im Smart Home auf Basis von Mutliagentensystemen. In Fachtagung
Mechatronik 2017 (Vol. 12, pp. 18–23). VDI Mechatronik.
bibtex: '@inproceedings{Michael_Hellweg_Henke_Trächtler_2017, title={Dynamische
Prozessplanung im Smart Home auf Basis von Mutliagentensystemen}, volume={12},
booktitle={Fachtagung Mechatronik 2017}, publisher={VDI Mechatronik}, author={Michael,
Jan and Hellweg, Alina and Henke, Christian and Trächtler, Ansgar}, year={2017},
pages={18–23} }'
chicago: Michael, Jan, Alina Hellweg, Christian Henke, and Ansgar Trächtler. “Dynamische
Prozessplanung Im Smart Home Auf Basis von Mutliagentensystemen.” In Fachtagung
Mechatronik 2017, 12:18–23. VDI Mechatronik, 2017.
ieee: J. Michael, A. Hellweg, C. Henke, and A. Trächtler, “Dynamische Prozessplanung
im Smart Home auf Basis von Mutliagentensystemen,” in Fachtagung Mechatronik
2017, 2017, vol. 12, pp. 18–23.
mla: Michael, Jan, et al. “Dynamische Prozessplanung Im Smart Home Auf Basis von
Mutliagentensystemen.” Fachtagung Mechatronik 2017, vol. 12, VDI Mechatronik,
2017, pp. 18–23.
short: 'J. Michael, A. Hellweg, C. Henke, A. Trächtler, in: Fachtagung Mechatronik
2017, VDI Mechatronik, 2017, pp. 18–23.'
date_created: 2021-08-09T05:50:19Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 12'
language:
- iso: eng
page: 18-23
publication: Fachtagung Mechatronik 2017
publisher: VDI Mechatronik
status: public
title: Dynamische Prozessplanung im Smart Home auf Basis von Mutliagentensystemen
type: conference
user_id: '24876'
volume: 12
year: '2017'
...
---
_id: '23014'
author:
- first_name: Arne Thorsten
full_name: Rüting, Arne Thorsten
last_name: Rüting
- first_name: Eduard
full_name: Block, Eduard
last_name: Block
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rüting AT, Block E, Trächtler A. Modellprädiktive Vorsteuerung für einen kinematisch
redundanten hybridkinematischen Mechanismus im Industrieumfeld. In: Fachtagung
Mechatronik 2017. Vol 12. VDI Mechatronik; 2017:250-255.'
apa: Rüting, A. T., Block, E., & Trächtler, A. (2017). Modellprädiktive Vorsteuerung
für einen kinematisch redundanten hybridkinematischen Mechanismus im Industrieumfeld.
In Fachtagung Mechatronik 2017 (Vol. 12, pp. 250–255). VDI Mechatronik.
bibtex: '@inproceedings{Rüting_Block_Trächtler_2017, title={Modellprädiktive Vorsteuerung
für einen kinematisch redundanten hybridkinematischen Mechanismus im Industrieumfeld},
volume={12}, booktitle={Fachtagung Mechatronik 2017}, publisher={VDI Mechatronik},
author={Rüting, Arne Thorsten and Block, Eduard and Trächtler, Ansgar}, year={2017},
pages={250–255} }'
chicago: Rüting, Arne Thorsten, Eduard Block, and Ansgar Trächtler. “Modellprädiktive
Vorsteuerung Für Einen Kinematisch Redundanten Hybridkinematischen Mechanismus
Im Industrieumfeld.” In Fachtagung Mechatronik 2017, 12:250–55. VDI Mechatronik,
2017.
ieee: A. T. Rüting, E. Block, and A. Trächtler, “Modellprädiktive Vorsteuerung für
einen kinematisch redundanten hybridkinematischen Mechanismus im Industrieumfeld,”
in Fachtagung Mechatronik 2017, 2017, vol. 12, pp. 250–255.
mla: Rüting, Arne Thorsten, et al. “Modellprädiktive Vorsteuerung Für Einen Kinematisch
Redundanten Hybridkinematischen Mechanismus Im Industrieumfeld.” Fachtagung
Mechatronik 2017, vol. 12, VDI Mechatronik, 2017, pp. 250–55.
short: 'A.T. Rüting, E. Block, A. Trächtler, in: Fachtagung Mechatronik 2017, VDI
Mechatronik, 2017, pp. 250–255.'
date_created: 2021-08-09T05:50:21Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 12'
language:
- iso: eng
page: 250-255
publication: Fachtagung Mechatronik 2017
publisher: VDI Mechatronik
status: public
title: Modellprädiktive Vorsteuerung für einen kinematisch redundanten hybridkinematischen
Mechanismus im Industrieumfeld
type: conference
user_id: '24876'
volume: 12
year: '2017'
...
---
_id: '23018'
author:
- first_name: Arathi
full_name: Pai, Arathi
last_name: Pai
citation:
ama: 'Pai A. Sliding-Mode-Regler zur Kraft- und Positionsregelung eines Formgedächtnislegierung-Aktors.
In: Regelungstechnisches Kolloquium. ; 2017.'
apa: Pai, A. (2017). Sliding-Mode-Regler zur Kraft- und Positionsregelung eines
Formgedächtnislegierung-Aktors. In Regelungstechnisches Kolloquium.
bibtex: '@inproceedings{Pai_2017, title={Sliding-Mode-Regler zur Kraft- und Positionsregelung
eines Formgedächtnislegierung-Aktors}, booktitle={Regelungstechnisches Kolloquium},
author={Pai, Arathi}, year={2017} }'
chicago: Pai, Arathi. “Sliding-Mode-Regler Zur Kraft- Und Positionsregelung Eines
Formgedächtnislegierung-Aktors.” In Regelungstechnisches Kolloquium, 2017.
ieee: A. Pai, “Sliding-Mode-Regler zur Kraft- und Positionsregelung eines Formgedächtnislegierung-Aktors,”
in Regelungstechnisches Kolloquium, 2017.
mla: Pai, Arathi. “Sliding-Mode-Regler Zur Kraft- Und Positionsregelung Eines Formgedächtnislegierung-Aktors.”
Regelungstechnisches Kolloquium, 2017.
short: 'A. Pai, in: Regelungstechnisches Kolloquium, 2017.'
date_created: 2021-08-09T05:50:26Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '241'
language:
- iso: eng
publication: Regelungstechnisches Kolloquium
status: public
title: Sliding-Mode-Regler zur Kraft- und Positionsregelung eines Formgedächtnislegierung-Aktors
type: conference
user_id: '24876'
year: '2017'
...
---
_id: '21690'
abstract:
- lang: eng
text: Additive Manufacturing is a technology that offers a high potential forindustrial
companies.Nevertheless, companies lack experience with this new technology and
face the problem to identify processes where a successful and beneficial application
can be achieved. They have to be supported in this analysis with a decision support
tool which is capable to compare different manufacturing or repair approaches
in order to determine the optimal solution for the correspondent use case. This
is not always driven solely by costs but can also be critically affected by further
influencing factors. This is why the decision support takes into account also
time and quality alongside the costs. For a time-critical spare part supply, for
example within aerospace sector, they are substantial for taking a decision. The
presented decision support features a multi-attribute decision-making approach
for selecting the most appropriate process, either Additive Manufacturing, conventional
technologies or an external procurement.
author:
- first_name: G.
full_name: Deppe, G.
last_name: Deppe
- first_name: R.
full_name: Koch, R.
last_name: Koch
- first_name: M.
full_name: Kaesberg, M.
last_name: Kaesberg
citation:
ama: 'Deppe G, Koch R, Kaesberg M. Rational Decision-Making for the Beneficial Application
of Additive Manufacturing. In: 28th Annual International Solid Freeform Fabrication
Symposium. Vol 28. ; 2017:2597-2611. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf'
apa: Deppe, G., Koch, R., & Kaesberg, M. (2017). Rational Decision-Making for
the Beneficial Application of Additive Manufacturing. In 28th Annual International
Solid Freeform Fabrication Symposium (Vol. 28, pp. 2597–2611). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf
bibtex: '@inproceedings{Deppe_Koch_Kaesberg_2017, title={Rational Decision-Making
for the Beneficial Application of Additive Manufacturing}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Deppe,
G. and Koch, R. and Kaesberg, M.}, year={2017}, pages={2597–2611} }'
chicago: Deppe, G., R. Koch, and M. Kaesberg. “Rational Decision-Making for the
Beneficial Application of Additive Manufacturing.” In 28th Annual International
Solid Freeform Fabrication Symposium, 28:2597–2611, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf.
ieee: G. Deppe, R. Koch, and M. Kaesberg, “Rational Decision-Making for the Beneficial
Application of Additive Manufacturing,” in 28th Annual International Solid
Freeform Fabrication Symposium, 2017, vol. 28, pp. 2597–2611.
mla: Deppe, G., et al. “Rational Decision-Making for the Beneficial Application
of Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication
Symposium, vol. 28, 2017, pp. 2597–611, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf.
short: 'G. Deppe, R. Koch, M. Kaesberg, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 2597–2611.'
date_created: 2021-04-21T07:32:05Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf
intvolume: ' 28'
language:
- iso: eng
page: 2597-2611
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Rational Decision-Making for the Beneficial Application of Additive Manufacturing
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21691'
abstract:
- lang: eng
text: Designing parts for additive manufacturing (AM) offers a broad range of geometrical
and functional potentials. On the one hand the manufacturingtechnology offers
the possibility of manufacturing highly complex freeform shapes, often referred
to as bionic shapes. By use of these, perfect force fluxes without stress risings
due to imperfect notches are realizable, getting the most value of used material.
On the other hand these complex structures require a reliable geometry representation
in compatible CAD-files. Conventional CAD systems were developed to generate geometries
that are manufacturable with conventional machining. These are not capable of
representing the high complex designs for AM. Especially for geometries generated
by CAE like from topology optimization the conventional CAD systems fail to take
advantage of the combination of CAE and AM. This paper explains why there is a
lack of compatibility of well-known CAD systems with the potentials of AM. Therefore
the AM-side of the problem is described by showing some potentials of AM and the
need of high complex structures for this manufacturing technology. For the other
side of the problem conventional methodologies for geometry representation of
CAD systems are described and their limitations with regard to AM are worked out.
Finally a voxel based geometry representation is presented as a solution for computer
aided geometry generation of high complex AM–structures.
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: S.
full_name: Vogelsang, S.
last_name: Vogelsang
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Reiher T, Vogelsang S, Koch R. Computer integration for geometry generation
for product optimization with Additive Manufacturing. In: 28th Annual International
Solid Freeform Fabrication Symposium. Vol 28. ; 2017:903-921. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf'
apa: Reiher, T., Vogelsang, S., & Koch, R. (2017). Computer integration for
geometry generation for product optimization with Additive Manufacturing. In 28th
Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 903–921).
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
bibtex: '@inproceedings{Reiher_Vogelsang_Koch_2017, title={Computer integration
for geometry generation for product optimization with Additive Manufacturing},
volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Reiher,
T. and Vogelsang, S. and Koch, R.}, year={2017}, pages={903–921} }'
chicago: Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry
Generation for Product Optimization with Additive Manufacturing.” In 28th Annual
International Solid Freeform Fabrication Symposium, 28:903–21, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
ieee: T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation
for product optimization with Additive Manufacturing,” in 28th Annual International
Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
mla: Reiher, T., et al. “Computer Integration for Geometry Generation for Product
Optimization with Additive Manufacturing.” 28th Annual International Solid
Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
short: 'T. Reiher, S. Vogelsang, R. Koch, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 903–921.'
date_created: 2021-04-21T07:32:06Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
intvolume: ' 28'
language:
- iso: eng
page: 903-921
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Computer integration for geometry generation for product optimization with
Additive Manufacturing
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21692'
abstract:
- lang: eng
text: In many branches in the designengineerdepartment, product designs are just
variations of existing parts. To bring the additive manufacturing technology closer
to the Designer, it is necessary to show them which of their existing, conventionally
manufactured parts can be produced with this technology. Apartselection methodology
supportsdesigners in the decision whether a part is suitable for additive manufacturingor
not. Due to the potential of the technology, which was especially seen in the
aerospace industries, many criteria of the methodology were initially adapted
for this industry. Furthermore the methodology is based on a quantified weighting
system, which comes to a certain subjectivity. For future use, a development towards
a less subjective methodology should be accomplished. Through a more detailed
adaption for individual industries and a simplification of the input mode, the
objectivity of the criteria can be increased. Likewise, the input time can be
reduced by simplifying the questioning. A more efficient part selection will be
achieved by a better weighting system.In the BMBF project “OptiAMix” this methodology
is supposed to be further developed for highly different branches. By a better
weighting system, the part selection will be more efficient. Therefore,the willingness
for the use of the improved selection andfor the additive manufacturing technology
will be increased.
author:
- first_name: A.
full_name: Kruse, A.
last_name: Kruse
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Kruse A, Reiher T, Koch R. Integrating AM into existing companies - selection
of existing parts for increase of acceptance. In: 28th Annual International
Solid Freeform Fabrication Symposium. Vol 28. ; 2017:2575-2584. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf'
apa: Kruse, A., Reiher, T., & Koch, R. (2017). Integrating AM into existing
companies - selection of existing parts for increase of acceptance. In 28th
Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 2575–2584).
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf
bibtex: '@inproceedings{Kruse_Reiher_Koch_2017, title={Integrating AM into existing
companies - selection of existing parts for increase of acceptance}, volume={28},
DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Kruse,
A. and Reiher, T. and Koch, R.}, year={2017}, pages={2575–2584} }'
chicago: Kruse, A., T. Reiher, and R. Koch. “Integrating AM into Existing Companies
- Selection of Existing Parts for Increase of Acceptance.” In 28th Annual International
Solid Freeform Fabrication Symposium, 28:2575–84, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf.
ieee: A. Kruse, T. Reiher, and R. Koch, “Integrating AM into existing companies
- selection of existing parts for increase of acceptance,” in 28th Annual International
Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2575–2584.
mla: Kruse, A., et al. “Integrating AM into Existing Companies - Selection of Existing
Parts for Increase of Acceptance.” 28th Annual International Solid Freeform
Fabrication Symposium, vol. 28, 2017, pp. 2575–84, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf.
short: 'A. Kruse, T. Reiher, R. Koch, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 2575–2584.'
date_created: 2021-04-21T07:32:07Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf
intvolume: ' 28'
language:
- iso: eng
page: 2575-2584
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Integrating AM into existing companies - selection of existing parts for increase
of acceptance
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21693'
abstract:
- lang: eng
text: Although infringements of intellectual properties in terms of product piracy
are growing for years and threaten investments in research and development most
companies still rely on legal measures like property rights. A more preventive
effect to protect against counterfeits can be achieved using technical measures
complicating reverse engineering, improving traceability and assuring data protection.
Additive Manufacturing can contribute a lot to the effectivity and efficiency
of those technical measures but presently they are often unconsidered during product
development. To support decision makers and designers through all the steps of
a product development process an integrated systematic approach has been developed.
Protective measures using AM are allocated to specific process steps and responsible
persons in charge so that the result is a guideline for “design for protection”.
The main idea is to help developing piracy-robust products for that the return
of investment is not threatened by counterfeits and its economical impacts.
author:
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: R.
full_name: Koch, R.
last_name: Koch
- first_name: A. T.
full_name: Oppermann, A. T.
last_name: Oppermann
citation:
ama: 'Jahnke U, Koch R, Oppermann AT. Design for protection: Systematic approach
to prevent product piracy during product development using AM . In: 28th Annual
International Solid Freeform Fabrication Symposium. Vol 28. ; 2017:2481-2492.
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf'
apa: 'Jahnke, U., Koch, R., & Oppermann, A. T. (2017). Design for protection:
Systematic approach to prevent product piracy during product development using
AM . In 28th Annual International Solid Freeform Fabrication Symposium
(Vol. 28, pp. 2481–2492). http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf'
bibtex: '@inproceedings{Jahnke_Koch_Oppermann_2017, title={Design for protection:
Systematic approach to prevent product piracy during product development using
AM }, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Jahnke,
U. and Koch, R. and Oppermann, A. T.}, year={2017}, pages={2481–2492} }'
chicago: 'Jahnke, U., R. Koch, and A. T. Oppermann. “Design for Protection: Systematic
Approach to Prevent Product Piracy during Product Development Using AM .” In 28th
Annual International Solid Freeform Fabrication Symposium, 28:2481–92, 2017.
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf.'
ieee: 'U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic
approach to prevent product piracy during product development using AM ,” in 28th
Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28,
pp. 2481–2492.'
mla: 'Jahnke, U., et al. “Design for Protection: Systematic Approach to Prevent
Product Piracy during Product Development Using AM .” 28th Annual International
Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2481–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf.'
short: 'U. Jahnke, R. Koch, A.T. Oppermann, in: 28th Annual International Solid
Freeform Fabrication Symposium, 2017, pp. 2481–2492.'
date_created: 2021-04-21T07:38:02Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf
intvolume: ' 28'
language:
- iso: eng
page: 2481-2492
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: 'Design for protection: Systematic approach to prevent product piracy during
product development using AM '
type: conference
user_id: '55833'
volume: 28
year: '2017'
...