---
_id: '15941'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Kim-Henning
full_name: Sauerland, Kim-Henning
last_name: Sauerland
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Reuter C, Sauerland K-H, Tröster T. Experimental and numerical crushing analysis
of circular CFRP tubes under axial impact loading. Composite Structures.
2017:33-44. doi:10.1016/j.compstruct.2017.04.052
apa: Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Experimental and numerical
crushing analysis of circular CFRP tubes under axial impact loading. Composite
Structures, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052
bibtex: '@article{Reuter_Sauerland_Tröster_2017, title={Experimental and numerical
crushing analysis of circular CFRP tubes under axial impact loading}, DOI={10.1016/j.compstruct.2017.04.052},
journal={Composite Structures}, author={Reuter, Corin and Sauerland, Kim-Henning
and Tröster, Thomas}, year={2017}, pages={33–44} }'
chicago: Reuter, Corin, Kim-Henning Sauerland, and Thomas Tröster. “Experimental
and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.”
Composite Structures, 2017, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052.
ieee: C. Reuter, K.-H. Sauerland, and T. Tröster, “Experimental and numerical crushing
analysis of circular CFRP tubes under axial impact loading,” Composite Structures,
pp. 33–44, 2017.
mla: Reuter, Corin, et al. “Experimental and Numerical Crushing Analysis of Circular
CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, pp.
33–44, doi:10.1016/j.compstruct.2017.04.052.
short: C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
date_created: 2020-02-20T13:23:14Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.compstruct.2017.04.052
language:
- iso: eng
page: 33-44
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Composite Structures
publication_identifier:
issn:
- 0263-8223
publication_status: published
status: public
title: Experimental and numerical crushing analysis of circular CFRP tubes under axial
impact loading
type: journal_article
user_id: '72008'
year: '2017'
...
---
_id: '15942'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Reuter C, Tröster T. Crashworthiness and numerical simulation of hybrid aluminium-CFRP
tubes under axial impact. Thin-Walled Structures. 2017;117:1-9. doi:10.1016/j.tws.2017.03.034
apa: Reuter, C., & Tröster, T. (2017). Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures,
117, 1–9. https://doi.org/10.1016/j.tws.2017.03.034
bibtex: '@article{Reuter_Tröster_2017, title={Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact}, volume={117}, DOI={10.1016/j.tws.2017.03.034},
journal={Thin-Walled Structures}, author={Reuter, Corin and Tröster, Thomas},
year={2017}, pages={1–9} }'
chicago: 'Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures
117 (2017): 1–9. https://doi.org/10.1016/j.tws.2017.03.034.'
ieee: C. Reuter and T. Tröster, “Crashworthiness and numerical simulation of hybrid
aluminium-CFRP tubes under axial impact,” Thin-Walled Structures, vol.
117, pp. 1–9, 2017.
mla: Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures,
vol. 117, 2017, pp. 1–9, doi:10.1016/j.tws.2017.03.034.
short: C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
date_created: 2020-02-20T13:33:08Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2017.03.034
intvolume: ' 117'
language:
- iso: eng
page: 1-9
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under
axial impact
type: journal_article
user_id: '72008'
volume: 117
year: '2017'
...
---
_id: '15944'
author:
- first_name: Jan André
full_name: Striewe, Jan André
id: '29413'
last_name: Striewe
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Kim-Henning
full_name: Sauerland, Kim-Henning
last_name: Sauerland
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Striewe JA, Reuter C, Sauerland K-H, Tröster T. Manufacturing and crashworthiness
of fabric-reinforced thermoplastic composites. Thin-Walled Structures.
2017:501-508. doi:10.1016/j.tws.2017.11.011
apa: Striewe, J. A., Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Manufacturing
and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled
Structures, 501–508. https://doi.org/10.1016/j.tws.2017.11.011
bibtex: '@article{Striewe_Reuter_Sauerland_Tröster_2017, title={Manufacturing and
crashworthiness of fabric-reinforced thermoplastic composites}, DOI={10.1016/j.tws.2017.11.011},
journal={Thin-Walled Structures}, author={Striewe, Jan André and Reuter, Corin
and Sauerland, Kim-Henning and Tröster, Thomas}, year={2017}, pages={501–508}
}'
chicago: Striewe, Jan André, Corin Reuter, Kim-Henning Sauerland, and Thomas Tröster.
“Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.”
Thin-Walled Structures, 2017, 501–8. https://doi.org/10.1016/j.tws.2017.11.011.
ieee: J. A. Striewe, C. Reuter, K.-H. Sauerland, and T. Tröster, “Manufacturing
and crashworthiness of fabric-reinforced thermoplastic composites,” Thin-Walled
Structures, pp. 501–508, 2017.
mla: Striewe, Jan André, et al. “Manufacturing and Crashworthiness of Fabric-Reinforced
Thermoplastic Composites.” Thin-Walled Structures, 2017, pp. 501–08, doi:10.1016/j.tws.2017.11.011.
short: J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures
(2017) 501–508.
date_created: 2020-02-20T14:00:29Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2017.11.011
language:
- iso: eng
page: 501-508
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
type: journal_article
user_id: '29413'
year: '2017'
...
---
_id: '16059'
author:
- first_name: Nathalie
full_name: Weiß-Borkowski, Nathalie
last_name: Weiß-Borkowski
- first_name: Juhne
full_name: Lian, Juhne
last_name: Lian
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Sebastian
full_name: Münstermann, Sebastian
last_name: Münstermann
- first_name: Wolfgang
full_name: Bleck, Wolfgang
last_name: Bleck
citation:
ama: 'Weiß-Borkowski N, Lian J, Marten T, Tröster T, Münstermann S, Bleck W. Forming
limit curves determined in high-speed Nakajima tests and predicted by a strain
rate sensitive model. In: Proceedings of The 20th International ESAFORM Conference
on Material Forming: ESAFORM 2017. ; 2017. doi:10.1063/1.5007961'
apa: 'Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., &
Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests
and predicted by a strain rate sensitive model. In Proceedings of The 20th
International ESAFORM Conference on Material Forming: ESAFORM 2017. https://doi.org/10.1063/1.5007961'
bibtex: '@inproceedings{Weiß-Borkowski_Lian_Marten_Tröster_Münstermann_Bleck_2017,
title={Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model}, DOI={10.1063/1.5007961},
booktitle={Proceedings of The 20th International ESAFORM Conference on Material
Forming: ESAFORM 2017}, author={Weiß-Borkowski, Nathalie and Lian, Juhne and Marten,
Thorsten and Tröster, Thomas and Münstermann, Sebastian and Bleck, Wolfgang},
year={2017} }'
chicago: 'Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster,
Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in
High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” In
Proceedings of The 20th International ESAFORM Conference on Material Forming:
ESAFORM 2017, 2017. https://doi.org/10.1063/1.5007961.'
ieee: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, and W.
Bleck, “Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model,” in Proceedings of The 20th International
ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.'
mla: 'Weiß-Borkowski, Nathalie, et al. “Forming Limit Curves Determined in High-Speed
Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” Proceedings
of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017,
2017, doi:10.1063/1.5007961.'
short: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck,
in: Proceedings of The 20th International ESAFORM Conference on Material Forming:
ESAFORM 2017, 2017.'
date_created: 2020-02-24T16:28:58Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1063/1.5007961
language:
- iso: eng
publication: 'Proceedings of The 20th International ESAFORM Conference on Material
Forming: ESAFORM 2017'
publication_status: published
status: public
title: Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16062'
abstract:
- lang: eng
text: The main objective for an economic and ecological use of raw materials
is the achievement of closed raw material cycles. Because of that, not only the
manufacturing procedures are important during the development of new materials
but also the recycling processes. Within the increased use of lightweight construction
in recent years, the application of multi-material or hybrid structures reach
high significance for the automotive industry. In this development, especially
the carbon fibre reinforced plastics (CFRP) gained its importance. However, currently
there are no recycling strategies available for hybrid structures; complete recycling
processes for CFRP are still expandable. This work presents methods for separation
of hybrid structures made of metal and CFRP, as well as the corresponding process
windows and the boundary conditions. The separation is performed by introduction
of thermal heat and the behaviour of these bonded compounds is analyzed based
on shear tensile tests. The results of these studies are used to develop a complete
recycling process for reclamation of hybrid structures.
author:
- first_name: Swetlana
full_name: Schweizer, Swetlana
id: '8938'
last_name: Schweizer
- first_name: Anna
full_name: Becker-Staines, Anna
last_name: Becker-Staines
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Schweizer S, Becker-Staines A, Tröster T. Separation of Hybrid Structures for
the Reclaim of their Single Components. Key Engineering Materials. 2017:568-575.
doi:10.4028/www.scientific.net/kem.742.568
apa: Schweizer, S., Becker-Staines, A., & Tröster, T. (2017). Separation of
Hybrid Structures for the Reclaim of their Single Components. Key Engineering
Materials, 568–575. https://doi.org/10.4028/www.scientific.net/kem.742.568
bibtex: '@article{Schweizer_Becker-Staines_Tröster_2017, title={Separation of Hybrid
Structures for the Reclaim of their Single Components}, DOI={10.4028/www.scientific.net/kem.742.568},
journal={Key Engineering Materials}, author={Schweizer, Swetlana and Becker-Staines,
Anna and Tröster, Thomas}, year={2017}, pages={568–575} }'
chicago: Schweizer, Swetlana, Anna Becker-Staines, and Thomas Tröster. “Separation
of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering
Materials, 2017, 568–75. https://doi.org/10.4028/www.scientific.net/kem.742.568.
ieee: S. Schweizer, A. Becker-Staines, and T. Tröster, “Separation of Hybrid Structures
for the Reclaim of their Single Components,” Key Engineering Materials,
pp. 568–575, 2017.
mla: Schweizer, Swetlana, et al. “Separation of Hybrid Structures for the Reclaim
of Their Single Components.” Key Engineering Materials, 2017, pp. 568–75,
doi:10.4028/www.scientific.net/kem.742.568.
short: S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017)
568–575.
date_created: 2020-02-24T16:32:21Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.4028/www.scientific.net/kem.742.568
language:
- iso: eng
page: 568-575
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
status: public
title: Separation of Hybrid Structures for the Reclaim of their Single Components
type: journal_article
user_id: '72008'
year: '2017'
...
---
_id: '16063'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Approve of porostiy for increasing process speed in the
laser melting process of Ti6Al4V. In: ; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process
speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Approve of porostiy for increasing
process speed in the laser melting process of Ti6Al4V}, author={Ahlers, Dominik
and Tröster, Thomas}, year={2017} }'
chicago: Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
ieee: D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed
in the laser melting process of Ti6Al4V,” presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
end_date: 2017-08-09
location: Austin, Texas, USA
name: 28th Annual International Solid Freeform Fabrication Symposium 2017
start_date: 2017-08-07
date_created: 2020-02-24T16:34:43Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: eng
status: public
title: Approve of porostiy for increasing process speed in the laser melting process
of Ti6Al4V
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16065'
author:
- first_name: P.
full_name: Kutz, P.
last_name: Kutz
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: M.
full_name: Ellouz, M.
last_name: Ellouz
- first_name: T.
full_name: Kordisch, T.
last_name: Kordisch
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Kutz P, Wang Z, Ellouz M, Kordisch T, Tröster T. Computed Tomography Examination
of Hybrid Components after Dynamic 3-Point Bending Test. In: ; 2017.'
apa: Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., & Tröster, T. (2017). Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test.
Presented at the 2nd Conference & Exhibition on Light Materials, Bremen.
bibtex: '@inproceedings{Kutz_Wang_Ellouz_Kordisch_Tröster_2017, title={Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test},
author={Kutz, P. and Wang, Z. and Ellouz, M. and Kordisch, T. and Tröster, Thomas},
year={2017} }'
chicago: Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,”
2017.
ieee: P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, and T. Tröster, “Computed Tomography
Examination of Hybrid Components after Dynamic 3-Point Bending Test,” presented
at the 2nd Conference & Exhibition on Light Materials, Bremen, 2017.
mla: Kutz, P., et al. Computed Tomography Examination of Hybrid Components after
Dynamic 3-Point Bending Test. 2017.
short: 'P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.'
conference:
end_date: 2017-11-10
location: Bremen
name: 2nd Conference & Exhibition on Light Materials
start_date: 2017-11-08
date_created: 2020-02-24T16:38:15Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Computed Tomography Examination of Hybrid Components after Dynamic 3-Point
Bending Test
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16070'
author:
- first_name: 'Nathalie '
full_name: 'Weiß Borkowski, Nathalie '
last_name: Weiß Borkowski
citation:
ama: Weiß Borkowski N. Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen. Shaker Verlag Band 2017/22; 2017.
apa: Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22.
bibtex: '@book{Weiß Borkowski_2017, title={Analyse des Verformungsverhaltens von
Übergangszonen partiell pressgehärteter Strukturen}, publisher={Shaker Verlag
Band 2017/22}, author={Weiß Borkowski, Nathalie }, year={2017} }'
chicago: Weiß Borkowski, Nathalie . Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
ieee: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
mla: Weiß Borkowski, Nathalie. Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
short: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
date_created: 2020-02-25T10:24:55Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-8440-5013-4
publisher: Shaker Verlag Band 2017/22
status: public
supervisor:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
title: Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter
Strukturen
type: dissertation
user_id: '72008'
year: '2017'
...
---
_id: '16071'
author:
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: P.
full_name: Kutz, P.
last_name: Kutz
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wang Z, Kutz P, Tröster T. Herstellung und computertomographische Untersuchung
von hybriden Strukturen aus Metall und Faserverbundkunststoffen. In: ; 2017.'
apa: Wang, Z., Kutz, P., & Tröster, T. (2017). Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen.
Presented at the 15. Bielefelder Werkstofftag, Bielefeld.
bibtex: '@inproceedings{Wang_Kutz_Tröster_2017, title={Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen},
author={Wang, Z. and Kutz, P. and Tröster, Thomas}, year={2017} }'
chicago: Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,”
2017.
ieee: Z. Wang, P. Kutz, and T. Tröster, “Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,”
presented at the 15. Bielefelder Werkstofftag, Bielefeld, 2017.
mla: Wang, Z., et al. Herstellung und computertomographische Untersuchung von
hybriden Strukturen aus Metall und Faserverbundkunststoffen. 2017.
short: 'Z. Wang, P. Kutz, T. Tröster, in: 2017.'
conference:
location: Bielefeld
name: 15. Bielefelder Werkstofftag
start_date: 06. April 2017
date_created: 2020-02-25T10:30:04Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Herstellung und computertomographische Untersuchung von hybriden Strukturen
aus Metall und Faserverbundkunststoffen
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16072'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
citation:
ama: 'Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate
on the instability in high speed cupping tests – Investigation on dual phase steel
and numerical validation by CRACH. In: ; 2017.'
apa: Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM
Conference, Schloss Hohenkammer.
bibtex: '@inproceedings{Weiß Borkowski_Camberg_Tröster_Marten_2017, title={Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH}, author={Weiß Borkowski,
N. and Camberg, Alan Adam and Tröster, Thomas and Marten, Thorsten}, year={2017}
}'
chicago: Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten.
“Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation
on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
ieee: N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of
strain rate on the instability in high speed cupping tests – Investigation on
dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM
Conference, Schloss Hohenkammer, 2017.
mla: Weiß Borkowski, N., et al. Influence of Strain Rate on the Instability in
High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation
by CRACH. 2017.
short: 'N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.'
conference:
location: Schloss Hohenkammer
name: 4th MATFEM Conference
start_date: 2017-04-25
date_created: 2020-02-25T10:37:14Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influence of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16073'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: A.
full_name: Schulz Beenken, A.
last_name: Schulz Beenken
citation:
ama: 'Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming
Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates.
In: ; 2017.'
apa: Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017).
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates. Presented at the 6th International Conference on Hot
Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
bibtex: '@inproceedings{Weiß Borkowski_Marten_Tröster_Schulz Beenken_2017, title={Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates}, author={Weiß Borkowski, N. and Marten, Thorsten and Tröster,
Thomas and Schulz Beenken, A.}, year={2017} }'
chicago: Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken.
“Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates,” 2017.
ieee: N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates,” presented at the 6th International Conference on Hot Sheet
Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017.
mla: Weiß Borkowski, N., et al. Analysis of the Forming Behaviour of Transition
Areas of Partial Press-Hardened Steel at High Strain-Rates. 2017.
short: 'N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.'
conference:
end_date: 2017-06-07
location: Atlanta, USA
name: 6th International Conference on Hot Sheet Metal Forming of High-Performance
Steel (CHS2 2017)
start_date: 2017-06-04
date_created: 2020-02-25T10:46:26Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication_identifier:
isbn:
- 978-1-935117-66-7
status: public
title: Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16074'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In:
; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive
Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Materialkombinationen in der
additive Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive
Fertigung,” 2017.
ieee: D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,”
presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive
Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Erfurt
name: Rapid.Tech 2017 – Fachforum Luftfahrt
start_date: 2017-06-22
date_created: 2020-02-25T10:52:14Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Materialkombinationen in der additive Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16075'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung.
In: ; 2017.'
apa: 'Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der
additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck:
Der Weg zum fertigen Bauteil, Nördlingen.'
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Aspekte der Produktentwicklung
in der additiven Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in
der additiven Fertigung,” 2017.
ieee: 'D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven
Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der
Weg zum fertigen Bauteil, Nördlingen, 2017.'
mla: Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der
additiven Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Nördlingen
name: 'Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil'
start_date: 2017-07-04
date_created: 2020-02-25T10:55:13Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Aspekte der Produktentwicklung in der additiven Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '10147'
author:
- first_name: Dagmar
full_name: Simon, Dagmar
last_name: Simon
- first_name: Eckhard
full_name: Steffen, Eckhard
id: '15548'
last_name: Steffen
citation:
ama: 'Simon D, Steffen E. Digitale Zukunft: ein inter- und transdisziplinäres Thema.
In: Maier GW, Engels G, Steffen E, eds. Handbuch Gestaltung digitaler und vernetzter
Arbeitswelten,. 1st ed. Springer Berlin Heidelberg; 2017:1-12.'
apa: 'Simon, D., & Steffen, E. (2017). Digitale Zukunft: ein inter- und transdisziplinäres
Thema. In G. W. Maier, G. Engels, & E. Steffen (Eds.), Handbuch Gestaltung
digitaler und vernetzter Arbeitswelten, (1st ed., pp. 1–12). Springer Berlin
Heidelberg.'
bibtex: '@inbook{Simon_Steffen_2017, edition={1}, title={Digitale Zukunft: ein inter-
und transdisziplinäres Thema}, booktitle={Handbuch Gestaltung digitaler und vernetzter
Arbeitswelten,}, publisher={Springer Berlin Heidelberg}, author={Simon, Dagmar
and Steffen, Eckhard}, editor={Maier, Günter W. and Engels, Gregor and Steffen,
EckhardEditors}, year={2017}, pages={1–12} }'
chicago: 'Simon, Dagmar, and Eckhard Steffen. “Digitale Zukunft: ein inter- und
transdisziplinäres Thema.” In Handbuch Gestaltung digitaler und vernetzter
Arbeitswelten, edited by Günter W. Maier, Gregor Engels, and Eckhard Steffen,
1st ed., 1–12. Springer Berlin Heidelberg, 2017.'
ieee: 'D. Simon and E. Steffen, “Digitale Zukunft: ein inter- und transdisziplinäres
Thema,” in Handbuch Gestaltung digitaler und vernetzter Arbeitswelten,
1st ed., G. W. Maier, G. Engels, and E. Steffen, Eds. Springer Berlin Heidelberg,
2017, pp. 1–12.'
mla: 'Simon, Dagmar, and Eckhard Steffen. “Digitale Zukunft: ein inter- und transdisziplinäres
Thema.” Handbuch Gestaltung digitaler und vernetzter Arbeitswelten, edited
by Günter W. Maier et al., 1st ed., Springer Berlin Heidelberg, 2017, pp. 1–12.'
short: 'D. Simon, E. Steffen, in: G.W. Maier, G. Engels, E. Steffen (Eds.), Handbuch
Gestaltung digitaler und vernetzter Arbeitswelten, 1st ed., Springer Berlin Heidelberg,
2017, pp. 1–12.'
date_created: 2019-06-07T08:57:03Z
date_updated: 2022-01-06T06:50:31Z
department:
- _id: '422'
edition: '1'
editor:
- first_name: Günter W.
full_name: Maier, Günter W.
last_name: Maier
- first_name: Gregor
full_name: Engels, Gregor
last_name: Engels
- first_name: Eckhard
full_name: Steffen, Eckhard
last_name: Steffen
language:
- iso: ger
page: 1-12
publication: Handbuch Gestaltung digitaler und vernetzter Arbeitswelten,
publication_status: published
publisher: Springer Berlin Heidelberg
status: public
title: 'Digitale Zukunft: ein inter- und transdisziplinäres Thema'
type: book_chapter
user_id: '15540'
year: '2017'
...
---
_id: '29915'
abstract:
- lang: eng
text: Für On-Board-Ladegeräte sind brückenlose netzfreundliche Gleichrichter in Kombination mit einem
Resonanzkonverter empfehlenswert. Auf diese Weise lassen sich Verluste minimieren und es wird eine hohe Leistungsdichte erreicht. Darüber hinaus wurde der Kühlungskreislauf des Ladegeräts durch CFD (Computational Fluid
Dynamics, rechnergestützte Flüssigkeitsdynamik)-Simulationen des Kühlkanals optimiert, um einen bestmöglichen Wärmeübergang bei
geringem Druckabfall zu erzielen.
author:
- first_name: Sven
full_name: Bolte, Sven
last_name: Bolte
- first_name: Carsten
full_name: Henkenius, Carsten
last_name: Henkenius
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Alexander
full_name: Zibart, Alexander
id: '11029'
last_name: Zibart
- first_name: Heiko
full_name: Figge, Heiko
last_name: Figge
citation:
ama: Bolte S, Henkenius C, Böcker J, Kenig E, Zibart A, Figge H. Wassergekühltes
On-Board-Ladegerät mit optimiertem Kühlkanal. wt Werkstattstechnik online.
2017;107(5):381ff.
apa: Bolte, S., Henkenius, C., Böcker, J., Kenig, E., Zibart, A., & Figge, H.
(2017). Wassergekühltes On-Board-Ladegerät mit optimiertem Kühlkanal. Wt Werkstattstechnik
Online, 107(5), 381ff.
bibtex: '@article{Bolte_Henkenius_Böcker_Kenig_Zibart_Figge_2017, title={Wassergekühltes
On-Board-Ladegerät mit optimiertem Kühlkanal}, volume={107}, number={5}, journal={wt
Werkstattstechnik online}, publisher={Springer-VDI-Verlag}, author={Bolte, Sven
and Henkenius, Carsten and Böcker, Joachim and Kenig, Eugeny and Zibart, Alexander
and Figge, Heiko}, year={2017}, pages={381ff} }'
chicago: 'Bolte, Sven, Carsten Henkenius, Joachim Böcker, Eugeny Kenig, Alexander
Zibart, and Heiko Figge. “Wassergekühltes On-Board-Ladegerät Mit Optimiertem Kühlkanal.”
Wt Werkstattstechnik Online 107, no. 5 (2017): 381ff.'
ieee: S. Bolte, C. Henkenius, J. Böcker, E. Kenig, A. Zibart, and H. Figge, “Wassergekühltes
On-Board-Ladegerät mit optimiertem Kühlkanal,” wt Werkstattstechnik online,
vol. 107, no. 5, p. 381ff, 2017.
mla: Bolte, Sven, et al. “Wassergekühltes On-Board-Ladegerät Mit Optimiertem Kühlkanal.”
Wt Werkstattstechnik Online, vol. 107, no. 5, Springer-VDI-Verlag, 2017,
p. 381ff.
short: S. Bolte, C. Henkenius, J. Böcker, E. Kenig, A. Zibart, H. Figge, Wt Werkstattstechnik
Online 107 (2017) 381ff.
date_created: 2022-02-21T09:32:28Z
date_updated: 2022-02-21T09:58:01Z
department:
- _id: '393'
- _id: '52'
- _id: '145'
intvolume: ' 107'
issue: '5'
language:
- iso: eng
main_file_link:
- url: https://docplayer.org/116518773-Wassergekuehltes-on-board-ladegeraet-mit-optimiertem-kuehlkanal.html
page: 381ff
publication: wt Werkstattstechnik online
publisher: Springer-VDI-Verlag
status: public
title: Wassergekühltes On-Board-Ladegerät mit optimiertem Kühlkanal
type: journal_article
user_id: '66'
volume: 107
year: '2017'
...
---
_id: '29914'
author:
- first_name: Sven
full_name: Bolte, Sven
last_name: Bolte
- first_name: Carsten
full_name: Henkenius, Carsten
last_name: Henkenius
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Alexander
full_name: Zibart, Alexander
id: '11029'
last_name: Zibart
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Heiko
full_name: Figge, Heiko
last_name: Figge
citation:
ama: 'Bolte S, Henkenius C, Böcker J, Zibart A, Kenig E, Figge H. Water-cooled on-board
charger with optimized cooling channel. In: 2017 19th European Conference on
Power Electronics and Applications (EPE’17 ECCE Europe). IEEE; 2017. doi:10.23919/epe17ecceeurope.2017.8099019'
apa: Bolte, S., Henkenius, C., Böcker, J., Zibart, A., Kenig, E., & Figge, H.
(2017). Water-cooled on-board charger with optimized cooling channel. 2017
19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe).
European Conference on Power Electronics and Applications (EPE’17 ECCE Europe),
Warsaw, Poland . https://doi.org/10.23919/epe17ecceeurope.2017.8099019
bibtex: '@inproceedings{Bolte_Henkenius_Böcker_Zibart_Kenig_Figge_2017, title={Water-cooled
on-board charger with optimized cooling channel}, DOI={10.23919/epe17ecceeurope.2017.8099019},
booktitle={2017 19th European Conference on Power Electronics and Applications
(EPE’17 ECCE Europe)}, publisher={IEEE}, author={Bolte, Sven and Henkenius, Carsten
and Böcker, Joachim and Zibart, Alexander and Kenig, Eugeny and Figge, Heiko},
year={2017} }'
chicago: Bolte, Sven, Carsten Henkenius, Joachim Böcker, Alexander Zibart, Eugeny
Kenig, and Heiko Figge. “Water-Cooled on-Board Charger with Optimized Cooling
Channel.” In 2017 19th European Conference on Power Electronics and Applications
(EPE’17 ECCE Europe). IEEE, 2017. https://doi.org/10.23919/epe17ecceeurope.2017.8099019.
ieee: 'S. Bolte, C. Henkenius, J. Böcker, A. Zibart, E. Kenig, and H. Figge, “Water-cooled
on-board charger with optimized cooling channel,” presented at the European Conference
on Power Electronics and Applications (EPE’17 ECCE Europe), Warsaw, Poland , 2017,
doi: 10.23919/epe17ecceeurope.2017.8099019.'
mla: Bolte, Sven, et al. “Water-Cooled on-Board Charger with Optimized Cooling Channel.”
2017 19th European Conference on Power Electronics and Applications (EPE’17
ECCE Europe), IEEE, 2017, doi:10.23919/epe17ecceeurope.2017.8099019.
short: 'S. Bolte, C. Henkenius, J. Böcker, A. Zibart, E. Kenig, H. Figge, in: 2017
19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe),
IEEE, 2017.'
conference:
location: 'Warsaw, Poland '
name: European Conference on Power Electronics and Applications (EPE'17 ECCE Europe)
start_date: 2017-09
date_created: 2022-02-21T09:20:19Z
date_updated: 2022-02-21T09:58:16Z
department:
- _id: '52'
- _id: '145'
- _id: '393'
doi: 10.23919/epe17ecceeurope.2017.8099019
language:
- iso: eng
publication: 2017 19th European Conference on Power Electronics and Applications (EPE'17
ECCE Europe)
publication_status: published
publisher: IEEE
status: public
title: Water-cooled on-board charger with optimized cooling channel
type: conference
user_id: '66'
year: '2017'
...
---
_id: '22038'
abstract:
- lang: eng
text: 'Micro Physiological Systems (MPS), also known as Multi-Organ-Chip, Organ-on-a-Chip,
or Body-on-a-Chip, are advanced microfluidic systems that allow the cultivation
of different types of cells and tissue in just one common circuit. Furthermore,
they thus can also adjust the interaction of these different tissues. Perspectival
MPS will replace animal testing. For fast and flexible manufacturing and marking
of MPS, a concept for a universal micromachining platform has been developed which
provides the following latest key technologies: laser micro cutting of polymer
foils, laser micro- and sub-micro-structuring of polymer foils, 3D printing of
polymer components as well as optical inspection and online process control. The
combination of different laser sources, processing optics, inspection systems,
and print heads on multiple axes allows the change and exactly positioning to
the workpiece during the process. Therewith, the realization of MPS including
3D printed components as well as direct laser interference patterned surfaces
for well-defined cell adhesion and product protection is possible. Additional
basic technologies for the generation of periodical line-like structures at polycarbonate
foils using special Direct Laser Interference Patterning (DLIP) optics as well
as for the 3D printing of fluid-tight cell culture reservoirs made of Acrylonitrile
Butadiene Styrene directly onto polycarbonate microfluidics were established.
A first prototype of the universal micromachining platform combining different
lasers with Direct Laser Writing and DLIP is shown. With this laser micro cutting
as well as laser micro-structuring of polycarbonate (PC) foils and therewith functionalization
for MPS application could be successfully demonstrated.'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: André
full_name: Hirsch, André
id: '27599'
last_name: Hirsch
- first_name: K.
full_name: Günther, K.
last_name: Günther
- first_name: F.
full_name: Sonntag, F.
last_name: Sonntag
- first_name: U.
full_name: Klotzbach, U.
last_name: Klotzbach
- first_name: A.F.
full_name: Lasagni, A.F.
last_name: Lasagni
citation:
ama: Moritzer E, Hirsch A, Günther K, Sonntag F, Klotzbach U, Lasagni AF. Universal
Micromachining Platform and Basic Technologies for the Manufacture and Marking
of Microphysiological Systems. Micromachines. 2017;8(246). doi:10.3390/mi8080246
apa: Moritzer, E., Hirsch, A., Günther, K., Sonntag, F., Klotzbach, U., & Lasagni,
A. F. (2017). Universal Micromachining Platform and Basic Technologies for the
Manufacture and Marking of Microphysiological Systems. Micromachines, 8(246).
https://doi.org/10.3390/mi8080246
bibtex: '@article{Moritzer_Hirsch_Günther_Sonntag_Klotzbach_Lasagni_2017, title={Universal
Micromachining Platform and Basic Technologies for the Manufacture and Marking
of Microphysiological Systems}, volume={8}, DOI={10.3390/mi8080246},
number={246}, journal={Micromachines}, publisher={MDPI}, author={Moritzer, Elmar
and Hirsch, André and Günther, K. and Sonntag, F. and Klotzbach, U. and Lasagni,
A.F.}, year={2017} }'
chicago: Moritzer, Elmar, André Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and
A.F. Lasagni. “Universal Micromachining Platform and Basic Technologies for the
Manufacture and Marking of Microphysiological Systems.” Micromachines 8,
no. 246 (2017). https://doi.org/10.3390/mi8080246.
ieee: 'E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni,
“Universal Micromachining Platform and Basic Technologies for the Manufacture
and Marking of Microphysiological Systems,” Micromachines, vol. 8, no.
246, 2017, doi: 10.3390/mi8080246.'
mla: Moritzer, Elmar, et al. “Universal Micromachining Platform and Basic Technologies
for the Manufacture and Marking of Microphysiological Systems.” Micromachines,
vol. 8, no. 246, MDPI, 2017, doi:10.3390/mi8080246.
short: E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni,
Micromachines 8 (2017).
date_created: 2021-05-07T13:23:20Z
date_updated: 2022-04-25T08:02:49Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.3390/mi8080246
intvolume: ' 8'
issue: '246'
language:
- iso: eng
publication: Micromachines
publisher: MDPI
quality_controlled: '1'
status: public
title: Universal Micromachining Platform and Basic Technologies for the Manufacture
and Marking of Microphysiological Systems
type: journal_article
user_id: '70729'
volume: 8
year: '2017'
...
---
_id: '22033'
abstract:
- lang: eng
text: The mechanical characterization of fused deposition modeling (FDM) parts is
mostly done by static tests. In many applications, parts are also dynamically
loaded. Here, fatigue tests can help to identify the expected lifetime of a part.
This article discusses the fatigue behavior of FDM specimens manufactured with
Ultem 9085. For this, tensile bars are manufactured according to ASTM D638 in
different build orientations. Tests are performed in a range of pulsating tensile
stresses, and S-N curves are documented for different build orientations. For
higher loads, the FDM anisotropy characterizes the lifetime of used specimens,
which is similar to static tensile bars. For lower loads, including a higher number
of cycles to failure, S-N curves of different build orientations converge. In
further tests, tensile bars were chemically smoothed with chloroform vapor. Chemical
smoothing reduces surface roughness and increases tensile strength of specimens
in the upright build direction. Fatigue tests of chemically treated specimens
show no significant lifetime increase.
author:
- first_name: M.
full_name: Fischer, M.
last_name: Fischer
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Fischer M, Schöppner V. Fatigue Behavior of FDM Parts Manufactured with Ultem
9085. JOM: The Journal of The Minerals Metals & Materials Society (TMS).
Published online 2017:563-568. doi:10.1007/s11837-016-2197-2'
apa: 'Fischer, M., & Schöppner, V. (2017). Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085. JOM: The Journal of The Minerals. Metals & Materials Society
(TMS), 563–568. https://doi.org/10.1007/s11837-016-2197-2'
bibtex: '@article{Fischer_Schöppner_2017, title={Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085}, DOI={10.1007/s11837-016-2197-2},
journal={JOM: The Journal of The Minerals. Metals & Materials Society (TMS)},
publisher={Springer Verlag}, author={Fischer, M. and Schöppner, Volker}, year={2017},
pages={563–568} }'
chicago: 'Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials
Society (TMS), 2017, 563–68. https://doi.org/10.1007/s11837-016-2197-2.'
ieee: 'M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials
Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.'
mla: 'Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials
Society (TMS), Springer Verlag, 2017, pp. 563–68, doi:10.1007/s11837-016-2197-2.'
short: 'M. Fischer, V. Schöppner, JOM: The Journal of The Minerals. Metals &
Materials Society (TMS) (2017) 563–568.'
date_created: 2021-05-07T13:23:14Z
date_updated: 2022-04-25T08:02:28Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1007/s11837-016-2197-2
language:
- iso: eng
page: 563-568
publication: 'JOM: The Journal of The Minerals. Metals & Materials Society (TMS)'
publisher: Springer Verlag
quality_controlled: '1'
status: public
title: Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
type: journal_article
user_id: '70729'
year: '2017'
...
---
_id: '22023'
abstract:
- lang: eng
text: Fused Deposition Modeling (FDM) is an Additive Manufacturing (AM) technology
which is used for prototypes, single-part-production and also small batch productions.
For use as a final product, it is important that the parts have good mechanical
properties, a high dimensional accuracy and smooth surfaces. The knowledge of
the mechanical properties is very important for the design engineer when it comes
to the component design. In this paper, investigations were conducted with the
polymer ABS-M30 from Stratasys Inc. To achieve a quality improvement of FDM parts,
various toolpath parameters and orientations were used. Within the mechanical
properties, the tensile, flexural and impact strength were evaluated. Furthermore,
the tensile strength of FDM parts is compared to injection molded specimens. With
optimized parameters, an increase of the tensile strength by up to 28 % and a
doubling of the impact strength were possible.
author:
- first_name: F.
full_name: Knoop, F.
last_name: Knoop
- first_name: A.
full_name: Kloke, A.
last_name: Kloke
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knoop F, Kloke A, Schöppner V. Quality Improvement of FDM Parts by Parameter
Optimization . In: 32nd International Conference of the Polymer Processing
Society. Vol 32. American Institute of Physics; 2017. doi:10.1063/1.5016790'
apa: Knoop, F., Kloke, A., & Schöppner, V. (2017). Quality Improvement of FDM
Parts by Parameter Optimization . 32nd International Conference of the Polymer
Processing Society, 32. https://doi.org/10.1063/1.5016790
bibtex: '@inproceedings{Knoop_Kloke_Schöppner_2017, title={Quality Improvement of
FDM Parts by Parameter Optimization }, volume={32}, DOI={10.1063/1.5016790},
booktitle={32nd International Conference of the Polymer Processing Society}, publisher={American
Institute of Physics}, author={Knoop, F. and Kloke, A. and Schöppner, Volker},
year={2017} }'
chicago: Knoop, F., A. Kloke, and Volker Schöppner. “Quality Improvement of FDM
Parts by Parameter Optimization .” In 32nd International Conference of the
Polymer Processing Society, Vol. 32. American Institute of Physics, 2017.
https://doi.org/10.1063/1.5016790.
ieee: 'F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by
Parameter Optimization ,” in 32nd International Conference of the Polymer Processing
Society, 2017, vol. 32, doi: 10.1063/1.5016790.'
mla: Knoop, F., et al. “Quality Improvement of FDM Parts by Parameter Optimization
.” 32nd International Conference of the Polymer Processing Society, vol.
32, American Institute of Physics, 2017, doi:10.1063/1.5016790.
short: 'F. Knoop, A. Kloke, V. Schöppner, in: 32nd International Conference of the
Polymer Processing Society, American Institute of Physics, 2017.'
date_created: 2021-05-07T13:23:03Z
date_updated: 2022-04-25T08:04:50Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.5016790
intvolume: ' 32'
language:
- iso: eng
publication: 32nd International Conference of the Polymer Processing Society
publisher: American Institute of Physics
quality_controlled: '1'
status: public
title: 'Quality Improvement of FDM Parts by Parameter Optimization '
type: conference
user_id: '70729'
volume: 32
year: '2017'
...
---
_id: '27201'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Michael
full_name: Schadomsky, Michael
last_name: Schadomsky
- first_name: J.
full_name: Walter, J.
last_name: Walter
citation:
ama: 'Schöppner V, Schadomsky M, Walter J. Bestimmung der Mischgüte bei Kautschukstiftextrudern
auf Basis experimenteller und simulativer Methoden. In: 25. Fachtagung Technomer.
; 2017.'
apa: Schöppner, V., Schadomsky, M., & Walter, J. (2017). Bestimmung der Mischgüte
bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden.
25. Fachtagung Technomer. 25. Fachtagung Technomer, Chemnitz (Deutschland).
bibtex: '@inproceedings{Schöppner_Schadomsky_Walter_2017, place={Chemnitz (Deutschland)},
title={Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller
und simulativer Methoden}, booktitle={25. Fachtagung Technomer}, author={Schöppner,
Volker and Schadomsky, Michael and Walter, J.}, year={2017} }'
chicago: Schöppner, Volker, Michael Schadomsky, and J. Walter. “Bestimmung Der Mischgüte
Bei Kautschukstiftextrudern Auf Basis Experimenteller Und Simulativer Methoden.”
In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
ieee: V. Schöppner, M. Schadomsky, and J. Walter, “Bestimmung der Mischgüte bei
Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden,” presented
at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
mla: Schöppner, Volker, et al. “Bestimmung Der Mischgüte Bei Kautschukstiftextrudern
Auf Basis Experimenteller Und Simulativer Methoden.” 25. Fachtagung Technomer,
2017.
short: 'V. Schöppner, M. Schadomsky, J. Walter, in: 25. Fachtagung Technomer, Chemnitz
(Deutschland), 2017.'
conference:
location: Chemnitz (Deutschland)
name: 25. Fachtagung Technomer
date_created: 2021-11-08T08:31:41Z
date_updated: 2022-07-04T14:19:34Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Chemnitz (Deutschland)
publication: 25. Fachtagung Technomer
status: public
title: Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller
und simulativer Methoden
type: conference
user_id: '11904'
year: '2017'
...