---
_id: '26901'
abstract:
- lang: ger
text: In der vorliegenden Arbeit wurden die mikrostrukturellen Eigenschaften und
das dadurch resultierende mechanische Verhalten der im SLM-Verfahren (Selective
Laser Melting) hergestellten Nickelbasis-Superlegierung Inconel 939 untersucht
und einer Inconel 939 Gusslegierung gegenübergestellt. Die monotonen und mikrostrukturellen
Untersuchungsergebnisse zeigen eine eindeutige Abhängigkeit der Herstellungsrichtung
und deutliche Unterschiede zur Gusslegierung, insbesondere in der Mikrostruktur.
Dehnungsgeregelte isotherme und thermomechanische Ermüdungsversuche in Kombination
mit der Methode der digitalen Bildkorrelation (DIC) beschreiben das mechanische
Verhalten sowie die kritischen Bereiche im Gefüge. Ob beim SLM- oder Gusswerkstoff
eine höhere Lebensdauer bei der isothermen Ermüdung erreicht wird, ist von der
Höhe der Beanspruchung abhängig. Im ausscheidungsgehärteten Zustand besitzt das
SLM-Material bei niedrigen Belastungen und Temperaturen von Raumtemperatur bis
750 °C eine höhere Lebensdauer und zeigt somit ein besseres Ermüdungsverhalten
als der Gusswerkstoff. Bei höheren Dehnungsamplituden werden vorhandene Poren
aktiviert und ein schnelles Versagen tritt ein. Mit geeigneten HIP-Parametern
konnte die Porosität allerdings deutlich reduziert werden.
author:
- first_name: Pirabagini
full_name: Kanagarajah, Pirabagini
last_name: Kanagarajah
citation:
ama: Kanagarajah P. Ermüdungsverhalten und mikrostrukturelle Charakterisierung
der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel
939. Vol 6.; 2016.
apa: Kanagarajah, P. (2016). Ermüdungsverhalten und mikrostrukturelle Charakterisierung
der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel
939 (Vol. 6).
bibtex: '@book{Kanagarajah_2016, series={Forschungsberichte des Direct Manufacturing
Research Centers}, title={Ermüdungsverhalten und mikrostrukturelle Charakterisierung
der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel
939}, volume={6}, author={Kanagarajah, Pirabagini}, year={2016}, collection={Forschungsberichte
des Direct Manufacturing Research Centers} }'
chicago: Kanagarajah, Pirabagini. Ermüdungsverhalten und mikrostrukturelle Charakterisierung
der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel
939. Vol. 6. Forschungsberichte des Direct Manufacturing Research Centers,
2016.
ieee: P. Kanagarajah, Ermüdungsverhalten und mikrostrukturelle Charakterisierung
der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel
939, vol. 6. 2016.
mla: Kanagarajah, Pirabagini. Ermüdungsverhalten und mikrostrukturelle Charakterisierung
der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel
939. 2016.
short: P. Kanagarajah, Ermüdungsverhalten und mikrostrukturelle Charakterisierung
der im Laserschmelzverfahren hergestellten Nickelbasis-Superlegierung Inconel
939, 2016.
date_created: 2021-10-26T13:39:27Z
date_updated: 2022-01-06T06:57:30Z
department:
- _id: '9'
- _id: '158'
- _id: '219'
intvolume: ' 6'
keyword:
- Nickelbasis-Superlegierung
- Inconel 939
- Laserschmelzverfahren
- SLM
- Ermüdung
- Mikrostruktur
language:
- iso: ger
page: '182'
publication_identifier:
isbn:
- 978-3-8440-4796-7
publication_status: published
series_title: Forschungsberichte des Direct Manufacturing Research Centers
status: public
title: Ermüdungsverhalten und mikrostrukturelle Charakterisierung der im Laserschmelzverfahren
hergestellten Nickelbasis-Superlegierung Inconel 939
type: dissertation
user_id: '77250'
volume: 6
year: '2016'
...
---
_id: '33'
abstract:
- lang: eng
text: Lightweight materials play an ever growing role in today's world. Saving on
the mass of a machine will usually translate into a lower energy consumption.
However, lightweight applications are prone to develop performance problems due
to vibration induced by the operation of the machine. The Fraunhofer Institute
for Manufacturing Technology and Advanced Materials in Dresden conducts research
into the damping properties of composite materials. They are experimenting with
hollow, particle filled spheres embedded in the lightweight material. Such a system
is the technical motivation of this thesis. Ultimately, a numerical experiment
to derive the coefficient of restitution is required. The simulation developed
in this thesis is based on a discrete element method to track the individual particle
and sphere trajectories. Based on a potential based approach for the particle
interactions deployed in molecular dynamics, the behavior of the particles can
be controlled effectively. The simulated volume is using reflecting boundaries
and encloses the hollow sphere. In this work, a highly flexible memory structure
was used with a linked cell approach to cope with the highly flexible mass of
particles. This allows for a linear complexity of the method in regard to the
particle number by reducing the computational overhead of the interaction computation.
Multiple numerical experiments show the great effect the particles have on the
damping behavior of the system.
- lang: ger
text: In vielen technischen Anwendungen spielt heute der Leichtbau eine große Rolle,
denn durch Gewichtseinsparungen lässt sich auch Energie einsparen. Allerdings
birgt der Leichtbau die Gefahr einer erhöhten Störanfälligkeit gegenüber Vibrationen,
die durch die Operation von Maschinen entstehen können. Das Fraunhofer Institut
für Fertigungstechnik und Angewandte Materialforschung in Dresden beschäftigt
sich mit den Möglichkeiten einer Schwingungsdämpfung durch Verbundwerkstoffe.
Dabei wird in die Leichtbaustruktur eine Vielzahl von Hohlkugeln eingebracht,
die mit Keramikpartikeln gefüllt sind. Diese Fragestellung bildet die technische
Motivation für diese Arbeit. Ziel ist, ein Experiment zur Bestimmung des Restitutionskoeffizienten
numerisch nachzubilden. Die Simulation basiert auf einer Diskreten Elemente Methode
um die Trajektorien der einzelnen Partikel und der Kugel berechnen zu können.
Basierend auf einem Potentialansatz für die Interaktionsberechnung in der Molekulardynamik
kann das Reibungsverhalten vielfältig angepasst werden. Das Simulationsvolumen
wird durch reflektierende Randbedingungen abgeschlossen und umfasst die Kugelhülle.
Dazu kam eine hochflexible Speicherstruktur zum Einsatz, um die heterogene Verteilung
der Partikel im Raum mit einer effizienten Linked Cell Methode abbilden zu können.
Dadurch wird eine in der Partikelzahl lineare Komplexität erreicht. Umfangreiche
numerische Experimente zeigen den großen Effekt der Partikelfüllung auf das Dämpfungsverhalten.
author:
- first_name: Tobias
full_name: Steinle, Tobias
last_name: Steinle
citation:
ama: Steinle T. Modeling and Simulation of Metallic, Particle-Damped Spheres
for Lightweight Materials.; 2016.
apa: Steinle, T. (2016). Modeling and simulation of metallic, particle-damped
spheres for lightweight materials.
bibtex: '@book{Steinle_2016, title={Modeling and simulation of metallic, particle-damped
spheres for lightweight materials}, author={Steinle, Tobias}, year={2016} }'
chicago: Steinle, Tobias. Modeling and Simulation of Metallic, Particle-Damped
Spheres for Lightweight Materials, 2016.
ieee: T. Steinle, Modeling and simulation of metallic, particle-damped spheres
for lightweight materials. 2016.
mla: Steinle, Tobias. Modeling and Simulation of Metallic, Particle-Damped Spheres
for Lightweight Materials. 2016.
short: T. Steinle, Modeling and Simulation of Metallic, Particle-Damped Spheres
for Lightweight Materials, 2016.
date_created: 2017-07-26T15:19:44Z
date_updated: 2022-01-06T06:59:09Z
department:
- _id: '27'
- _id: '104'
- _id: '155'
language:
- iso: eng
main_file_link:
- url: http://nbn-resolving.de/urn:nbn:de:hbz:466:2-24042
status: public
supervisor:
- first_name: Andrea
full_name: Walther, Andrea
last_name: Walther
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
title: Modeling and simulation of metallic, particle-damped spheres for lightweight
materials
type: dissertation
user_id: '24135'
year: '2016'
...
---
_id: '34'
author:
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
- first_name: Julian
full_name: Eckstein, Julian
last_name: Eckstein
- first_name: Kathrin
full_name: Flaßkamp, Kathrin
last_name: Flaßkamp
- first_name: Patrick
full_name: Friedel, Patrick
last_name: Friedel
- first_name: Christian
full_name: Horenkamp, Christian
last_name: Horenkamp
- first_name: Ulrich
full_name: Köhler, Ulrich
last_name: Köhler
- first_name: Sina
full_name: Ober-Blöbaum, Sina
last_name: Ober-Blöbaum
- first_name: Sebastian
full_name: Peitz, Sebastian
last_name: Peitz
- first_name: Sebastian
full_name: Tiemeyer, Sebastian
last_name: Tiemeyer
citation:
ama: 'Dellnitz M, Eckstein J, Flaßkamp K, et al. Multiobjective Optimal Control
Methods for the Development of an Intelligent Cruise Control. In: Progress
in Industrial Mathematics at ECMI. Vol 22. Mathematics in Industry. Cham:
Springer International Publishing; 2016:633-641. doi:10.1007/978-3-319-23413-7_87'
apa: 'Dellnitz, M., Eckstein, J., Flaßkamp, K., Friedel, P., Horenkamp, C., Köhler,
U., … Tiemeyer, S. (2016). Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control. In Progress in Industrial Mathematics at
ECMI (Vol. 22, pp. 633–641). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-23413-7_87'
bibtex: '@inproceedings{Dellnitz_Eckstein_Flaßkamp_Friedel_Horenkamp_Köhler_Ober-Blöbaum_Peitz_Tiemeyer_2016,
place={Cham}, series={Mathematics in Industry}, title={Multiobjective Optimal
Control Methods for the Development of an Intelligent Cruise Control}, volume={22},
DOI={10.1007/978-3-319-23413-7_87},
booktitle={Progress in Industrial Mathematics at ECMI}, publisher={Springer International
Publishing}, author={Dellnitz, Michael and Eckstein, Julian and Flaßkamp, Kathrin
and Friedel, Patrick and Horenkamp, Christian and Köhler, Ulrich and Ober-Blöbaum,
Sina and Peitz, Sebastian and Tiemeyer, Sebastian}, year={2016}, pages={633–641},
collection={Mathematics in Industry} }'
chicago: 'Dellnitz, Michael, Julian Eckstein, Kathrin Flaßkamp, Patrick Friedel,
Christian Horenkamp, Ulrich Köhler, Sina Ober-Blöbaum, Sebastian Peitz, and Sebastian
Tiemeyer. “Multiobjective Optimal Control Methods for the Development of an Intelligent
Cruise Control.” In Progress in Industrial Mathematics at ECMI, 22:633–41.
Mathematics in Industry. Cham: Springer International Publishing, 2016. https://doi.org/10.1007/978-3-319-23413-7_87.'
ieee: M. Dellnitz et al., “Multiobjective Optimal Control Methods for the
Development of an Intelligent Cruise Control,” in Progress in Industrial Mathematics
at ECMI, 2016, vol. 22, pp. 633–641.
mla: Dellnitz, Michael, et al. “Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control.” Progress in Industrial Mathematics at ECMI,
vol. 22, Springer International Publishing, 2016, pp. 633–41, doi:10.1007/978-3-319-23413-7_87.
short: 'M. Dellnitz, J. Eckstein, K. Flaßkamp, P. Friedel, C. Horenkamp, U. Köhler,
S. Ober-Blöbaum, S. Peitz, S. Tiemeyer, in: Progress in Industrial Mathematics
at ECMI, Springer International Publishing, Cham, 2016, pp. 633–641.'
date_created: 2017-07-26T15:25:33Z
date_updated: 2022-01-06T06:59:14Z
department:
- _id: '27'
- _id: '101'
doi: 10.1007/978-3-319-23413-7_87
intvolume: ' 22'
page: 633-641
place: Cham
publication: Progress in Industrial Mathematics at ECMI
publication_identifier:
issn:
- 2212-0173
publisher: Springer International Publishing
series_title: Mathematics in Industry
status: public
title: Multiobjective Optimal Control Methods for the Development of an Intelligent
Cruise Control
type: conference
user_id: '24135'
volume: 22
year: '2016'
...
---
_id: '3543'
author:
- first_name: Andre
full_name: Hildebrandt, Andre
last_name: Hildebrandt
- first_name: Samer
full_name: Alhaddad, Samer
id: '42456'
last_name: Alhaddad
- first_name: Manfred
full_name: Hammer, Manfred
id: '48077'
last_name: Hammer
orcid: 0000-0002-6331-9348
- first_name: Jens
full_name: Förstner, Jens
id: '158'
last_name: Förstner
orcid: 0000-0001-7059-9862
citation:
ama: 'Hildebrandt A, Alhaddad S, Hammer M, Förstner J. Oblique incidence of semi-guided
waves on step-like folds in planar dielectric slabs: Lossless vertical interconnects
in 3D integrated photonic circuits. In: Broquin J-E, Nunzi Conti G, eds. Integrated
Optics: Devices, Materials, and Technologies XX. SPIE; 2016. doi:10.1117/12.2214460'
apa: 'Hildebrandt, A., Alhaddad, S., Hammer, M., & Förstner, J. (2016). Oblique
incidence of semi-guided waves on step-like folds in planar dielectric slabs:
Lossless vertical interconnects in 3D integrated photonic circuits. In J.-E. Broquin
& G. Nunzi Conti (Eds.), Integrated Optics: Devices, Materials, and Technologies
XX. SPIE. https://doi.org/10.1117/12.2214460'
bibtex: '@inproceedings{Hildebrandt_Alhaddad_Hammer_Förstner_2016, title={Oblique
incidence of semi-guided waves on step-like folds in planar dielectric slabs:
Lossless vertical interconnects in 3D integrated photonic circuits}, DOI={10.1117/12.2214460},
booktitle={Integrated Optics: Devices, Materials, and Technologies XX}, publisher={SPIE},
author={Hildebrandt, Andre and Alhaddad, Samer and Hammer, Manfred and Förstner,
Jens}, editor={Broquin, Jean-Emmanuel and Nunzi Conti, GualtieroEditors}, year={2016}
}'
chicago: 'Hildebrandt, Andre, Samer Alhaddad, Manfred Hammer, and Jens Förstner.
“Oblique Incidence of Semi-Guided Waves on Step-like Folds in Planar Dielectric
Slabs: Lossless Vertical Interconnects in 3D Integrated Photonic Circuits.” In
Integrated Optics: Devices, Materials, and Technologies XX, edited by Jean-Emmanuel
Broquin and Gualtiero Nunzi Conti. SPIE, 2016. https://doi.org/10.1117/12.2214460.'
ieee: 'A. Hildebrandt, S. Alhaddad, M. Hammer, and J. Förstner, “Oblique incidence
of semi-guided waves on step-like folds in planar dielectric slabs: Lossless vertical
interconnects in 3D integrated photonic circuits,” in Integrated Optics: Devices,
Materials, and Technologies XX, 2016.'
mla: 'Hildebrandt, Andre, et al. “Oblique Incidence of Semi-Guided Waves on Step-like
Folds in Planar Dielectric Slabs: Lossless Vertical Interconnects in 3D Integrated
Photonic Circuits.” Integrated Optics: Devices, Materials, and Technologies
XX, edited by Jean-Emmanuel Broquin and Gualtiero Nunzi Conti, SPIE, 2016,
doi:10.1117/12.2214460.'
short: 'A. Hildebrandt, S. Alhaddad, M. Hammer, J. Förstner, in: J.-E. Broquin,
G. Nunzi Conti (Eds.), Integrated Optics: Devices, Materials, and Technologies
XX, SPIE, 2016.'
date_created: 2018-07-11T09:35:06Z
date_updated: 2022-01-06T06:59:23Z
ddc:
- '530'
department:
- _id: '61'
- _id: '230'
- _id: '429'
doi: 10.1117/12.2214460
editor:
- first_name: Jean-Emmanuel
full_name: Broquin, Jean-Emmanuel
last_name: Broquin
- first_name: Gualtiero
full_name: Nunzi Conti, Gualtiero
last_name: Nunzi Conti
file:
- access_level: closed
content_type: application/pdf
creator: fossie
date_created: 2018-07-11T09:38:29Z
date_updated: 2018-07-11T09:38:29Z
file_id: '3544'
file_name: 2016-02 Hildebrandt SPIE OPTO 2016.pdf
file_size: 1239213
relation: main_file
success: 1
file_date_updated: 2018-07-11T09:38:29Z
has_accepted_license: '1'
keyword:
- tet_topic_waveguide
language:
- iso: eng
publication: 'Integrated Optics: Devices, Materials, and Technologies XX'
publication_status: published
publisher: SPIE
status: public
title: 'Oblique incidence of semi-guided waves on step-like folds in planar dielectric
slabs: Lossless vertical interconnects in 3D integrated photonic circuits'
type: conference
user_id: '158'
year: '2016'
...
---
_id: '3798'
author:
- first_name: Thomas
full_name: Hett, Thomas
last_name: Hett
- first_name: Torsten
full_name: Frers, Torsten
last_name: Frers
- first_name: Alex
full_name: Widhalm, Alex
last_name: Widhalm
- first_name: Gerhard
full_name: Berth, Gerhard
id: '53'
last_name: Berth
- first_name: Ulrich
full_name: Hilleringmann, Ulrich
last_name: Hilleringmann
- first_name: Artur
full_name: Zrenner, Artur
id: '606'
last_name: Zrenner
orcid: 0000-0002-5190-0944
citation:
ama: 'Hett T, Frers T, Widhalm A, Berth G, Hilleringmann U, Zrenner A. Silicon oxynitride
microdisk resonators for integrated waveguide coupling. In: Smart Systems Integration
2016 - International Conference and Exhibition on Integration Issues of Miniaturized
Systems, SSI 2016. Munich; 2016:400-403.'
apa: Hett, T., Frers, T., Widhalm, A., Berth, G., Hilleringmann, U., & Zrenner,
A. (2016). Silicon oxynitride microdisk resonators for integrated waveguide coupling.
In Smart Systems Integration 2016 - International Conference and Exhibition
on Integration Issues of Miniaturized Systems, SSI 2016 (pp. 400–403). Munich.
bibtex: '@inproceedings{Hett_Frers_Widhalm_Berth_Hilleringmann_Zrenner_2016, place={Munich},
title={Silicon oxynitride microdisk resonators for integrated waveguide coupling},
booktitle={Smart Systems Integration 2016 - International Conference and Exhibition
on Integration Issues of Miniaturized Systems, SSI 2016}, author={Hett, Thomas
and Frers, Torsten and Widhalm, Alex and Berth, Gerhard and Hilleringmann, Ulrich
and Zrenner, Artur}, year={2016}, pages={400–403} }'
chicago: Hett, Thomas, Torsten Frers, Alex Widhalm, Gerhard Berth, Ulrich Hilleringmann,
and Artur Zrenner. “Silicon Oxynitride Microdisk Resonators for Integrated Waveguide
Coupling.” In Smart Systems Integration 2016 - International Conference and
Exhibition on Integration Issues of Miniaturized Systems, SSI 2016, 400–403.
Munich, 2016.
ieee: T. Hett, T. Frers, A. Widhalm, G. Berth, U. Hilleringmann, and A. Zrenner,
“Silicon oxynitride microdisk resonators for integrated waveguide coupling,” in
Smart Systems Integration 2016 - International Conference and Exhibition on
Integration Issues of Miniaturized Systems, SSI 2016, Munich, 2016, pp. 400–403.
mla: Hett, Thomas, et al. “Silicon Oxynitride Microdisk Resonators for Integrated
Waveguide Coupling.” Smart Systems Integration 2016 - International Conference
and Exhibition on Integration Issues of Miniaturized Systems, SSI 2016, 2016,
pp. 400–03.
short: 'T. Hett, T. Frers, A. Widhalm, G. Berth, U. Hilleringmann, A. Zrenner, in:
Smart Systems Integration 2016 - International Conference and Exhibition on Integration
Issues of Miniaturized Systems, SSI 2016, Munich, 2016, pp. 400–403.'
conference:
end_date: 2016-03-10
location: Munich
name: Smart Systems Integration 2016 - International Conference and Exhibition on
Integration Issues of Miniaturized Systems, SSI 2016
start_date: 2016-03-09
date_created: 2018-08-02T12:19:51Z
date_updated: 2022-01-06T06:59:36Z
department:
- _id: '15'
- _id: '230'
- _id: '35'
language:
- iso: eng
page: 400 - 403
place: Munich
publication: Smart Systems Integration 2016 - International Conference and Exhibition
on Integration Issues of Miniaturized Systems, SSI 2016
publication_identifier:
unknown:
- 978-3-95735-040-4
publication_status: published
status: public
title: Silicon oxynitride microdisk resonators for integrated waveguide coupling
type: conference
user_id: '49428'
year: '2016'
...
---
_id: '27245'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: K.
full_name: Westhues, K.
last_name: Westhues
- first_name: T
full_name: Westhues, T
last_name: Westhues
citation:
ama: 'Schöppner V, Westhues K, Westhues T. A New Sample Preparation Method to Investigate
Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw
Extruders. In: 32nd International Conference of the Polymer Processing Society
(PPS). ; 2016.'
apa: Schöppner, V., Westhues, K., & Westhues, T. (2016). A New Sample Preparation
Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of
Co-Rotating Twin Screw Extruders. 32nd International Conference of the Polymer
Processing Society (PPS). 32nd International Conference of the Polymer Processing
Society (PPS), Lyon (Frankreich).
bibtex: '@inproceedings{Schöppner_Westhues_Westhues_2016, place={Lyon (Frankreich)},
title={A New Sample Preparation Method to Investigate Melting Phenomena within
a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders}, booktitle={32nd
International Conference of the Polymer Processing Society (PPS)}, author={Schöppner,
Volker and Westhues, K. and Westhues, T}, year={2016} }'
chicago: Schöppner, Volker, K. Westhues, and T Westhues. “A New Sample Preparation
Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of
Co-Rotating Twin Screw Extruders.” In 32nd International Conference of the
Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
ieee: V. Schöppner, K. Westhues, and T. Westhues, “A New Sample Preparation Method
to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating
Twin Screw Extruders,” presented at the 32nd International Conference of the Polymer
Processing Society (PPS), Lyon (Frankreich), 2016.
mla: Schöppner, Volker, et al. “A New Sample Preparation Method to Investigate Melting
Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders.”
32nd International Conference of the Polymer Processing Society (PPS),
2016.
short: 'V. Schöppner, K. Westhues, T. Westhues, in: 32nd International Conference
of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
location: Lyon (Frankreich)
name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T09:55:02Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: A New Sample Preparation Method to Investigate Melting Phenomena within a Partly
Filled Melting Zone Of Co-Rotating Twin Screw Extruders
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27246'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: M.
full_name: Hüttner, M.
last_name: Hüttner
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
- first_name: Manuel
full_name: Webersen, Manuel
id: '11289'
last_name: Webersen
orcid: 0000-0001-6411-4232
citation:
ama: 'Moritzer E, Hüttner M, Henning B, Webersen M. An Approach to Non-Destructive
Testing of Aged Polymers. In: 32nd International Conference of the Polymer
Processing Society (PPS). ; 2016.'
apa: Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). An Approach
to Non-Destructive Testing of Aged Polymers. 32nd International Conference
of the Polymer Processing Society (PPS). 32nd International Conference of
the Polymer Processing Society (PPS), Lyon (Frankreich).
bibtex: '@inproceedings{Moritzer_Hüttner_Henning_Webersen_2016, place={Lyon (Frankreich)},
title={An Approach to Non-Destructive Testing of Aged Polymers}, booktitle={32nd
International Conference of the Polymer Processing Society (PPS)}, author={Moritzer,
Elmar and Hüttner, M. and Henning, Bernd and Webersen, Manuel}, year={2016} }'
chicago: Moritzer, Elmar, M. Hüttner, Bernd Henning, and Manuel Webersen. “An Approach
to Non-Destructive Testing of Aged Polymers.” In 32nd International Conference
of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
ieee: E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “An Approach to Non-Destructive
Testing of Aged Polymers,” presented at the 32nd International Conference of the
Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
mla: Moritzer, Elmar, et al. “An Approach to Non-Destructive Testing of Aged Polymers.”
32nd International Conference of the Polymer Processing Society (PPS),
2016.
short: 'E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: 32nd International
Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
location: Lyon (Frankreich)
name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T09:56:48Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: An Approach to Non-Destructive Testing of Aged Polymers
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27248'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: S.
full_name: Brockhaus, S.
last_name: Brockhaus
- first_name: C.
full_name: Penner, C.
last_name: Penner
- first_name: J.
full_name: Möckel, J.
last_name: Möckel
citation:
ama: Schöppner V, Brockhaus S, Penner C, Möckel J. Auswirkungen von Betriebsparametern
in der Heißluftvulkanisation. GAK Gummi Fasern Kunststoffe. 2016;(69. Jg.
Heft 7):410-413.
apa: Schöppner, V., Brockhaus, S., Penner, C., & Möckel, J. (2016). Auswirkungen
von Betriebsparametern in der Heißluftvulkanisation. GAK Gummi Fasern Kunststoffe,
69. Jg. Heft 7, 410–413.
bibtex: '@article{Schöppner_Brockhaus_Penner_Möckel_2016, title={Auswirkungen von
Betriebsparametern in der Heißluftvulkanisation}, number={69. Jg. Heft 7}, journal={GAK
Gummi Fasern Kunststoffe}, author={Schöppner, Volker and Brockhaus, S. and Penner,
C. and Möckel, J.}, year={2016}, pages={410–413} }'
chicago: 'Schöppner, Volker, S. Brockhaus, C. Penner, and J. Möckel. “Auswirkungen
von Betriebsparametern in Der Heißluftvulkanisation.” GAK Gummi Fasern Kunststoffe,
no. 69. Jg. Heft 7 (2016): 410–13.'
ieee: V. Schöppner, S. Brockhaus, C. Penner, and J. Möckel, “Auswirkungen von Betriebsparametern
in der Heißluftvulkanisation,” GAK Gummi Fasern Kunststoffe, no. 69. Jg.
Heft 7, pp. 410–413, 2016.
mla: Schöppner, Volker, et al. “Auswirkungen von Betriebsparametern in Der Heißluftvulkanisation.”
GAK Gummi Fasern Kunststoffe, no. 69. Jg. Heft 7, 2016, pp. 410–13.
short: V. Schöppner, S. Brockhaus, C. Penner, J. Möckel, GAK Gummi Fasern Kunststoffe
(2016) 410–413.
date_created: 2021-11-08T10:02:05Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 69. Jg. Heft 7
language:
- iso: eng
page: 410-413
publication: GAK Gummi Fasern Kunststoffe
publication_identifier:
issn:
- 0176-1625
status: public
title: Auswirkungen von Betriebsparametern in der Heißluftvulkanisation
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27249'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: S.
full_name: Littek, S.
last_name: Littek
- first_name: 'Artjom '
full_name: 'Döring, Artjom '
last_name: Döring
- first_name: Dirk
full_name: Kuckling, Dirk
id: '287'
last_name: Kuckling
citation:
ama: 'Schöppner V, Littek S, Döring A, Kuckling D. Berechnung des Materialabbaus
von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung.
Zeitschrift Kunststofftechnik / Journal of Plastics Technology. Published
online 2016:18.'
apa: 'Schöppner, V., Littek, S., Döring, A., & Kuckling, D. (2016). Berechnung
des Materialabbaus von PP und PS in der Plastifiziereinheit Teil 1: Belastung
und Materialmodellierung. Zeitschrift Kunststofftechnik / Journal of Plastics
Technology, 18.'
bibtex: '@article{Schöppner_Littek_Döring_Kuckling_2016, title={Berechnung des Materialabbaus
von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung},
journal={Zeitschrift Kunststofftechnik / Journal of Plastics Technology}, author={Schöppner,
Volker and Littek, S. and Döring, Artjom and Kuckling, Dirk}, year={2016}, pages={18}
}'
chicago: 'Schöppner, Volker, S. Littek, Artjom Döring, and Dirk Kuckling. “Berechnung
Des Materialabbaus von PP Und PS in Der Plastifiziereinheit Teil 1: Belastung
Und Materialmodellierung.” Zeitschrift Kunststofftechnik / Journal of Plastics
Technology, 2016, 18.'
ieee: 'V. Schöppner, S. Littek, A. Döring, and D. Kuckling, “Berechnung des Materialabbaus
von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung,”
Zeitschrift Kunststofftechnik / Journal of Plastics Technology, p. 18,
2016.'
mla: 'Schöppner, Volker, et al. “Berechnung Des Materialabbaus von PP Und PS in
Der Plastifiziereinheit Teil 1: Belastung Und Materialmodellierung.” Zeitschrift
Kunststofftechnik / Journal of Plastics Technology, 2016, p. 18.'
short: V. Schöppner, S. Littek, A. Döring, D. Kuckling, Zeitschrift Kunststofftechnik
/ Journal of Plastics Technology (2016) 18.
date_created: 2021-11-08T10:04:13Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: '18'
publication: Zeitschrift Kunststofftechnik / Journal of Plastics Technology
status: public
title: 'Berechnung des Materialabbaus von PP und PS in der Plastifiziereinheit Teil
1: Belastung und Materialmodellierung'
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27250'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: M.
full_name: Hüttner, M.
last_name: Hüttner
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
- first_name: Manuel
full_name: Webersen, Manuel
id: '11289'
last_name: Webersen
orcid: 0000-0001-6411-4232
citation:
ama: Moritzer E, Hüttner M, Henning B, Webersen M. Detecting Molecular Damage -
Non-Destructive Characterization of Molecular Changes in Aged Polymers. Kunststoffe
international. 2016;(10. Jg. Heft 4):43-45.
apa: Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). Detecting
Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged
Polymers. Kunststoffe International, 10. Jg. Heft 4, 43–45.
bibtex: '@article{Moritzer_Hüttner_Henning_Webersen_2016, title={Detecting Molecular
Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers},
number={10. Jg. Heft 4}, journal={Kunststoffe international}, author={Moritzer,
Elmar and Hüttner, M. and Henning, Bernd and Webersen, Manuel}, year={2016}, pages={43–45}
}'
chicago: 'Moritzer, Elmar, M. Hüttner, Bernd Henning, and Manuel Webersen. “Detecting
Molecular Damage - Non-Destructive Characterization of Molecular Changes in Aged
Polymers.” Kunststoffe International, no. 10. Jg. Heft 4 (2016): 43–45.'
ieee: E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Detecting Molecular
Damage - Non-Destructive Characterization of Molecular Changes in Aged Polymers,”
Kunststoffe international, no. 10. Jg. Heft 4, pp. 43–45, 2016.
mla: Moritzer, Elmar, et al. “Detecting Molecular Damage - Non-Destructive Characterization
of Molecular Changes in Aged Polymers.” Kunststoffe International, no.
10. Jg. Heft 4, 2016, pp. 43–45.
short: E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe International
(2016) 43–45.
date_created: 2021-11-08T10:06:15Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 10. Jg. Heft 4
language:
- iso: eng
page: 43-45
publication: Kunststoffe international
publication_identifier:
issn:
- 1862-4243
status: public
title: Detecting Molecular Damage - Non-Destructive Characterization of Molecular
Changes in Aged Polymers
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27251'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: T.
full_name: Nordmeyer, T.
last_name: Nordmeyer
- first_name: L.
full_name: Enneking, L.
last_name: Enneking
- first_name: A.
full_name: Grishin, A.
last_name: Grishin
- first_name: A.
full_name: Knospe, A.
last_name: Knospe
- first_name: C.
full_name: Buske, C.
last_name: Buske
citation:
ama: 'Moritzer E, Nordmeyer T, Enneking L, Grishin A, Knospe A, Buske C. Development
of an Inline Plasma Treatment During Injection Molding Process. In: 74th Annual
Technical Conference of the Society of Plastics Engineers (ANTEC). ; 2016.'
apa: Moritzer, E., Nordmeyer, T., Enneking, L., Grishin, A., Knospe, A., & Buske,
C. (2016). Development of an Inline Plasma Treatment During Injection Molding
Process. 74th Annual Technical Conference of the Society of Plastics Engineers
(ANTEC). 74th Annual Technical Conference of the Society of Plastics Engineers
(ANTEC), Indianapolis (USA).
bibtex: '@inproceedings{Moritzer_Nordmeyer_Enneking_Grishin_Knospe_Buske_2016, place={Indianapolis
(USA)}, title={Development of an Inline Plasma Treatment During Injection Molding
Process}, booktitle={74th Annual Technical Conference of the Society of Plastics
Engineers (ANTEC)}, author={Moritzer, Elmar and Nordmeyer, T. and Enneking, L.
and Grishin, A. and Knospe, A. and Buske, C.}, year={2016} }'
chicago: Moritzer, Elmar, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and
C. Buske. “Development of an Inline Plasma Treatment During Injection Molding
Process.” In 74th Annual Technical Conference of the Society of Plastics Engineers
(ANTEC). Indianapolis (USA), 2016.
ieee: E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and C. Buske,
“Development of an Inline Plasma Treatment During Injection Molding Process,”
presented at the 74th Annual Technical Conference of the Society of Plastics Engineers
(ANTEC), Indianapolis (USA), 2016.
mla: Moritzer, Elmar, et al. “Development of an Inline Plasma Treatment During Injection
Molding Process.” 74th Annual Technical Conference of the Society of Plastics
Engineers (ANTEC), 2016.
short: 'E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, C. Buske,
in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC),
Indianapolis (USA), 2016.'
conference:
location: Indianapolis (USA)
name: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-08T10:08:11Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Indianapolis (USA)
publication: 74th Annual Technical Conference of the Society of Plastics Engineers
(ANTEC)
status: public
title: Development of an Inline Plasma Treatment During Injection Molding Process
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27252'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: C.
full_name: Budde, C.
last_name: Budde
- first_name: M.
full_name: Hüttner, M.
last_name: Hüttner
citation:
ama: 'Moritzer E, Budde C, Hüttner M. Die Riveting – A New Joining Technology for
Composite Sheet-Metal-Hybrid Joints. In: Joining in Car Body Engineering 2016.
; 2016.'
apa: Moritzer, E., Budde, C., & Hüttner, M. (2016). Die Riveting – A New Joining
Technology for Composite Sheet-Metal-Hybrid Joints. Joining in Car Body Engineering
2016. Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland).
bibtex: '@inproceedings{Moritzer_Budde_Hüttner_2016, place={Bad Nauheim (Deutschland)},
title={Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid
Joints}, booktitle={Joining in Car Body Engineering 2016}, author={Moritzer, Elmar
and Budde, C. and Hüttner, M.}, year={2016} }'
chicago: Moritzer, Elmar, C. Budde, and M. Hüttner. “Die Riveting – A New Joining
Technology for Composite Sheet-Metal-Hybrid Joints.” In Joining in Car Body
Engineering 2016. Bad Nauheim (Deutschland), 2016.
ieee: E. Moritzer, C. Budde, and M. Hüttner, “Die Riveting – A New Joining Technology
for Composite Sheet-Metal-Hybrid Joints,” presented at the Joining in Car Body
Engineering 2016, Bad Nauheim (Deutschland), 2016.
mla: Moritzer, Elmar, et al. “Die Riveting – A New Joining Technology for Composite
Sheet-Metal-Hybrid Joints.” Joining in Car Body Engineering 2016, 2016.
short: 'E. Moritzer, C. Budde, M. Hüttner, in: Joining in Car Body Engineering 2016,
Bad Nauheim (Deutschland), 2016.'
conference:
location: Bad Nauheim (Deutschland)
name: Joining in Car Body Engineering 2016
date_created: 2021-11-08T10:09:38Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Bad Nauheim (Deutschland)
publication: Joining in Car Body Engineering 2016
status: public
title: Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27253'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: M.
full_name: Hüttner, M.
last_name: Hüttner
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
- first_name: Manuel
full_name: Webersen, Manuel
id: '11289'
last_name: Webersen
orcid: 0000-0001-6411-4232
citation:
ama: 'Moritzer E, Hüttner M, Henning B, Webersen M. Ein Ansatz zur zerstörungsfreien
Prüfung von hydrothermisch gealterten Polymeren. In: Safe and Reliable Structures.
; 2016.'
apa: Moritzer, E., Hüttner, M., Henning, B., & Webersen, M. (2016). Ein Ansatz
zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren. Safe
and Reliable Structures. Safe and Reliable Structures, Dalheim (Deutschland).
bibtex: '@inproceedings{Moritzer_Hüttner_Henning_Webersen_2016, place={Dalheim (Deutschland)},
title={Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten
Polymeren}, booktitle={Safe and Reliable Structures}, author={Moritzer, Elmar
and Hüttner, M. and Henning, Bernd and Webersen, Manuel}, year={2016} }'
chicago: Moritzer, Elmar, M. Hüttner, Bernd Henning, and Manuel Webersen. “Ein Ansatz
Zur Zerstörungsfreien Prüfung von Hydrothermisch Gealterten Polymeren.” In Safe
and Reliable Structures. Dalheim (Deutschland), 2016.
ieee: E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ein Ansatz zur zerstörungsfreien
Prüfung von hydrothermisch gealterten Polymeren,” presented at the Safe and Reliable
Structures, Dalheim (Deutschland), 2016.
mla: Moritzer, Elmar, et al. “Ein Ansatz Zur Zerstörungsfreien Prüfung von Hydrothermisch
Gealterten Polymeren.” Safe and Reliable Structures, 2016.
short: 'E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Safe and Reliable
Structures, Dalheim (Deutschland), 2016.'
conference:
location: Dalheim (Deutschland)
name: Safe and Reliable Structures
date_created: 2021-11-08T10:11:50Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Dalheim (Deutschland)
publication: Safe and Reliable Structures
status: public
title: Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27254'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Y.
full_name: Martin, Y.
last_name: Martin
citation:
ama: 'Moritzer E, Martin Y. Experimental Investigations on the Fibre Length Degradation
in Injection Moulds. In: 32nd International Conference of the Polymer Processing
Society (PPS). ; 2016.'
apa: Moritzer, E., & Martin, Y. (2016). Experimental Investigations on the Fibre
Length Degradation in Injection Moulds. 32nd International Conference of the
Polymer Processing Society (PPS). 32nd International Conference of the Polymer
Processing Society (PPS), Lyon (Frankreich).
bibtex: '@inproceedings{Moritzer_Martin_2016, place={Lyon (Frankreich)}, title={Experimental
Investigations on the Fibre Length Degradation in Injection Moulds}, booktitle={32nd
International Conference of the Polymer Processing Society (PPS)}, author={Moritzer,
Elmar and Martin, Y.}, year={2016} }'
chicago: Moritzer, Elmar, and Y. Martin. “Experimental Investigations on the Fibre
Length Degradation in Injection Moulds.” In 32nd International Conference of
the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
ieee: E. Moritzer and Y. Martin, “Experimental Investigations on the Fibre Length
Degradation in Injection Moulds,” presented at the 32nd International Conference
of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
mla: Moritzer, Elmar, and Y. Martin. “Experimental Investigations on the Fibre Length
Degradation in Injection Moulds.” 32nd International Conference of the Polymer
Processing Society (PPS), 2016.
short: 'E. Moritzer, Y. Martin, in: 32nd International Conference of the Polymer
Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
location: Lyon (Frankreich)
name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T10:12:52Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: Experimental Investigations on the Fibre Length Degradation in Injection Moulds
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27255'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: S.
full_name: Brockhaus, S.
last_name: Brockhaus
- first_name: G.
full_name: Heiderich, G.
last_name: Heiderich
citation:
ama: 'Moritzer E, Brockhaus S, Heiderich G. Fiber Length Degradation of Glass Fiber-Reinforced
Polypropylene during Shearing. In: 74th Annual Technical Conference of the
Society of Plastics Engineers (ANTEC). ; 2016.'
apa: Moritzer, E., Brockhaus, S., & Heiderich, G. (2016). Fiber Length Degradation
of Glass Fiber-Reinforced Polypropylene during Shearing. 74th Annual Technical
Conference of the Society of Plastics Engineers (ANTEC). 74th Annual Technical
Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).
bibtex: '@inproceedings{Moritzer_Brockhaus_Heiderich_2016, place={Indianapolis (USA)},
title={Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during
Shearing}, booktitle={74th Annual Technical Conference of the Society of Plastics
Engineers (ANTEC)}, author={Moritzer, Elmar and Brockhaus, S. and Heiderich, G.},
year={2016} }'
chicago: Moritzer, Elmar, S. Brockhaus, and G. Heiderich. “Fiber Length Degradation
of Glass Fiber-Reinforced Polypropylene during Shearing.” In 74th Annual Technical
Conference of the Society of Plastics Engineers (ANTEC). Indianapolis (USA),
2016.
ieee: E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of
Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 74th Annual
Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis
(USA), 2016.
mla: Moritzer, Elmar, et al. “Fiber Length Degradation of Glass Fiber-Reinforced
Polypropylene during Shearing.” 74th Annual Technical Conference of the Society
of Plastics Engineers (ANTEC), 2016.
short: 'E. Moritzer, S. Brockhaus, G. Heiderich, in: 74th Annual Technical Conference
of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.'
conference:
location: Indianapolis (USA)
name: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-08T10:14:36Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Indianapolis (USA)
publication: 74th Annual Technical Conference of the Society of Plastics Engineers
(ANTEC)
status: public
title: Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27256'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: S.
full_name: Brockhaus, S.
last_name: Brockhaus
- first_name: G.
full_name: Heiderich, G.
last_name: Heiderich
citation:
ama: 'Moritzer E, Brockhaus S, Heiderich G. Fiber Length Degradation of Glass Fiber-Reinforced
Polypropylene during Shearing. In: 16th Annual International Polymer Colloquium
(IPC). ; 2016.'
apa: Moritzer, E., Brockhaus, S., & Heiderich, G. (2016). Fiber Length Degradation
of Glass Fiber-Reinforced Polypropylene during Shearing. 16th Annual International
Polymer Colloquium (IPC). 16th Annual International Polymer Colloquium (IPC),
Madison (USA).
bibtex: '@inproceedings{Moritzer_Brockhaus_Heiderich_2016, place={Madison (USA)},
title={Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during
Shearing}, booktitle={16th Annual International Polymer Colloquium (IPC)}, author={Moritzer,
Elmar and Brockhaus, S. and Heiderich, G.}, year={2016} }'
chicago: Moritzer, Elmar, S. Brockhaus, and G. Heiderich. “Fiber Length Degradation
of Glass Fiber-Reinforced Polypropylene during Shearing.” In 16th Annual International
Polymer Colloquium (IPC). Madison (USA), 2016.
ieee: E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of
Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 16th Annual
International Polymer Colloquium (IPC), Madison (USA), 2016.
mla: Moritzer, Elmar, et al. “Fiber Length Degradation of Glass Fiber-Reinforced
Polypropylene during Shearing.” 16th Annual International Polymer Colloquium
(IPC), 2016.
short: 'E. Moritzer, S. Brockhaus, G. Heiderich, in: 16th Annual International Polymer
Colloquium (IPC), Madison (USA), 2016.'
conference:
location: Madison (USA)
name: 16th Annual International Polymer Colloquium (IPC)
date_created: 2021-11-08T10:15:52Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Madison (USA)
publication: 16th Annual International Polymer Colloquium (IPC)
status: public
title: Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27257'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: G.
full_name: Heiderich, G.
last_name: Heiderich
citation:
ama: 'Moritzer E, Heiderich G. Fiber Length Reduction during Shearing in Polymer
Processing. In: 32nd International Conference of the Polymer Processing Society
(PPS). ; 2016.'
apa: Moritzer, E., & Heiderich, G. (2016). Fiber Length Reduction during Shearing
in Polymer Processing. 32nd International Conference of the Polymer Processing
Society (PPS). 32nd International Conference of the Polymer Processing Society
(PPS), Lyon (Frankreich).
bibtex: '@inproceedings{Moritzer_Heiderich_2016, place={Lyon (Frankreich)}, title={Fiber
Length Reduction during Shearing in Polymer Processing}, booktitle={32nd International
Conference of the Polymer Processing Society (PPS)}, author={Moritzer, Elmar and
Heiderich, G.}, year={2016} }'
chicago: Moritzer, Elmar, and G. Heiderich. “Fiber Length Reduction during Shearing
in Polymer Processing.” In 32nd International Conference of the Polymer Processing
Society (PPS). Lyon (Frankreich), 2016.
ieee: E. Moritzer and G. Heiderich, “Fiber Length Reduction during Shearing in Polymer
Processing,” presented at the 32nd International Conference of the Polymer Processing
Society (PPS), Lyon (Frankreich), 2016.
mla: Moritzer, Elmar, and G. Heiderich. “Fiber Length Reduction during Shearing
in Polymer Processing.” 32nd International Conference of the Polymer Processing
Society (PPS), 2016.
short: 'E. Moritzer, G. Heiderich, in: 32nd International Conference of the Polymer
Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
location: Lyon (Frankreich)
name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T10:17:03Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: Fiber Length Reduction during Shearing in Polymer Processing
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27258'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: M.
full_name: Pohl, M.
last_name: Pohl
citation:
ama: 'Schöppner V, Pohl M. First Insight into the High Speed Extrusion of Polycarbonate.
In: 32nd International Conference of the Polymer Processing Society (PPS).
; 2016.'
apa: Schöppner, V., & Pohl, M. (2016). First Insight into the High Speed Extrusion
of Polycarbonate. 32nd International Conference of the Polymer Processing Society
(PPS). 32nd International Conference of the Polymer Processing Society (PPS),
Lyon (Frankreich).
bibtex: '@inproceedings{Schöppner_Pohl_2016, place={Lyon (Frankreich)}, title={First
Insight into the High Speed Extrusion of Polycarbonate}, booktitle={32nd International
Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker
and Pohl, M.}, year={2016} }'
chicago: Schöppner, Volker, and M. Pohl. “First Insight into the High Speed Extrusion
of Polycarbonate.” In 32nd International Conference of the Polymer Processing
Society (PPS). Lyon (Frankreich), 2016.
ieee: V. Schöppner and M. Pohl, “First Insight into the High Speed Extrusion of
Polycarbonate,” presented at the 32nd International Conference of the Polymer
Processing Society (PPS), Lyon (Frankreich), 2016.
mla: Schöppner, Volker, and M. Pohl. “First Insight into the High Speed Extrusion
of Polycarbonate.” 32nd International Conference of the Polymer Processing
Society (PPS), 2016.
short: 'V. Schöppner, M. Pohl, in: 32nd International Conference of the Polymer
Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
location: Lyon (Frankreich)
name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T10:25:11Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: First Insight into the High Speed Extrusion of Polycarbonate
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27259'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: R.
full_name: Kleeschulte, R.
last_name: Kleeschulte
- first_name: S.
full_name: Zavoral, S.
last_name: Zavoral
- first_name: E.
full_name: Kaiser, E.
last_name: Kaiser
citation:
ama: Moritzer E, Kleeschulte R, Zavoral S, Kaiser E. Gut gewickelt - Mit effektiver
Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule
für die Monofilindustrie. Kunststoffe. 2016;(106. Jg. Heft 2):54-58.
apa: Moritzer, E., Kleeschulte, R., Zavoral, S., & Kaiser, E. (2016). Gut gewickelt
- Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie
einer Kunststoffspule für die Monofilindustrie. Kunststoffe, 106. Jg.
Heft 2, 54–58.
bibtex: '@article{Moritzer_Kleeschulte_Zavoral_Kaiser_2016, title={Gut gewickelt
- Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie
einer Kunststoffspule für die Monofilindustrie}, number={106. Jg. Heft 2}, journal={Kunststoffe},
author={Moritzer, Elmar and Kleeschulte, R. and Zavoral, S. and Kaiser, E.}, year={2016},
pages={54–58} }'
chicago: 'Moritzer, Elmar, R. Kleeschulte, S. Zavoral, and E. Kaiser. “Gut Gewickelt
- Mit Effektiver Topologieentwicklung Zur Belastungsorientierten Bauteilgeometrie
Einer Kunststoffspule Für Die Monofilindustrie.” Kunststoffe, no. 106.
Jg. Heft 2 (2016): 54–58.'
ieee: E. Moritzer, R. Kleeschulte, S. Zavoral, and E. Kaiser, “Gut gewickelt - Mit
effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer
Kunststoffspule für die Monofilindustrie,” Kunststoffe, no. 106. Jg. Heft
2, pp. 54–58, 2016.
mla: Moritzer, Elmar, et al. “Gut Gewickelt - Mit Effektiver Topologieentwicklung
Zur Belastungsorientierten Bauteilgeometrie Einer Kunststoffspule Für Die Monofilindustrie.”
Kunststoffe, no. 106. Jg. Heft 2, 2016, pp. 54–58.
short: E. Moritzer, R. Kleeschulte, S. Zavoral, E. Kaiser, Kunststoffe (2016) 54–58.
date_created: 2021-11-08T10:27:08Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 106. Jg. Heft 2
language:
- iso: eng
page: 54-58
publication: Kunststoffe
publication_identifier:
issn:
- 0023-5563
status: public
title: Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten
Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27260'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: N.
full_name: Fecke, N.
last_name: Fecke
- first_name: B.
full_name: Landgräber, B.
last_name: Landgräber
- first_name: W.
full_name: Kern, W.
last_name: Kern
- first_name: B.
full_name: Kaynak, B.
last_name: Kaynak
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: S.
full_name: Waschke, S.
last_name: Waschke
citation:
ama: Moritzer E, Fecke N, Landgräber B, et al. In Zukunft einfach entformen - Neu
entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen
verringern. Kunststoffe. 2016;(106. Jg. Heft 8):70-72.
apa: Moritzer, E., Fecke, N., Landgräber, B., Kern, W., Kaynak, B., Grundmeier,
G., & Waschke, S. (2016). In Zukunft einfach entformen - Neu entwickelte molekulare
Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern. Kunststoffe,
106. Jg. Heft 8, 70–72.
bibtex: '@article{Moritzer_Fecke_Landgräber_Kern_Kaynak_Grundmeier_Waschke_2016,
title={In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen
sollen die Entformungskräfte beim Spritzgießen verringern}, number={106. Jg. Heft
8}, journal={Kunststoffe}, author={Moritzer, Elmar and Fecke, N. and Landgräber,
B. and Kern, W. and Kaynak, B. and Grundmeier, Guido and Waschke, S.}, year={2016},
pages={70–72} }'
chicago: 'Moritzer, Elmar, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, Guido Grundmeier,
and S. Waschke. “In Zukunft Einfach Entformen - Neu Entwickelte Molekulare Beschichtungen
Sollen Die Entformungskräfte Beim Spritzgießen Verringern.” Kunststoffe,
no. 106. Jg. Heft 8 (2016): 70–72.'
ieee: E. Moritzer et al., “In Zukunft einfach entformen - Neu entwickelte
molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern,”
Kunststoffe, no. 106. Jg. Heft 8, pp. 70–72, 2016.
mla: Moritzer, Elmar, et al. “In Zukunft Einfach Entformen - Neu Entwickelte Molekulare
Beschichtungen Sollen Die Entformungskräfte Beim Spritzgießen Verringern.” Kunststoffe,
no. 106. Jg. Heft 8, 2016, pp. 70–72.
short: E. Moritzer, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, G. Grundmeier,
S. Waschke, Kunststoffe (2016) 70–72.
date_created: 2021-11-08T10:31:59Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 106. Jg. Heft 8
language:
- iso: eng
page: 70-72
publication: Kunststoffe
publication_identifier:
issn:
- 0023-5563
status: public
title: In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen
die Entformungskräfte beim Spritzgießen verringern
type: journal_article
user_id: '44116'
year: '2016'
...