---
_id: '20942'
abstract:
- lang: eng
text: Interface modification based on ultra-thin mercapto-propyl(trimethoxy) silane
(MPTMS) films is shown to promote joining of copper and aluminum by plastic deformation
followed by a heat treatment. The surface morphology and the surface chemistry
of the metal substrates were analyzed by means of FE-SEM, XPS, and FT-IRRAS. The
spectroscopic data show that the MPTMS film is crosslinked via Si-O-Si bonds and
that stable Cu-S and Si-O-Al interfacial bonds are formed. The shear-force tests
of the joints led to force displacement curves that are characteristic for a covalently
bonded interface. Complementary cross sectional SEM and EDS analysis of the joint
proved that a defect-free interface was formed without any measureable interdiffusion
of metals across the interface or cracking of an oxide films.
author:
- first_name: Christian
full_name: Hoppe, Christian
id: '27401'
last_name: Hoppe
- first_name: Christoph
full_name: Ebbert, Christoph
id: '7266'
last_name: Ebbert
- first_name: Markus
full_name: Voigt, Markus
last_name: Voigt
- first_name: Hans Christian
full_name: Schmidt, Hans Christian
last_name: Schmidt
- first_name: Dmytro
full_name: Rodman, Dmytro
last_name: Rodman
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Hans Juergen
full_name: Maier, Hans Juergen
last_name: Maier
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Hoppe C, Ebbert C, Voigt M, et al. Molecular Engineering of Aluminum-Copper
Interfaces for Joining by Plastic Deformation. ADVANCED ENGINEERING MATERIALS.
2016;18(6):1066-1074. doi:10.1002/adem.201500501
apa: Hoppe, C., Ebbert, C., Voigt, M., Schmidt, H. C., Rodman, D., Homberg, W.,
… Grundmeier, G. (2016). Molecular Engineering of Aluminum-Copper Interfaces for
Joining by Plastic Deformation. ADVANCED ENGINEERING MATERIALS, 18(6),
1066–1074. https://doi.org/10.1002/adem.201500501
bibtex: '@article{Hoppe_Ebbert_Voigt_Schmidt_Rodman_Homberg_Maier_Grundmeier_2016,
title={Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic
Deformation}, volume={18}, DOI={10.1002/adem.201500501},
number={6}, journal={ADVANCED ENGINEERING MATERIALS}, author={Hoppe, Christian
and Ebbert, Christoph and Voigt, Markus and Schmidt, Hans Christian and Rodman,
Dmytro and Homberg, Werner and Maier, Hans Juergen and Grundmeier, Guido}, year={2016},
pages={1066–1074} }'
chicago: 'Hoppe, Christian, Christoph Ebbert, Markus Voigt, Hans Christian Schmidt,
Dmytro Rodman, Werner Homberg, Hans Juergen Maier, and Guido Grundmeier. “Molecular
Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation.”
ADVANCED ENGINEERING MATERIALS 18, no. 6 (2016): 1066–74. https://doi.org/10.1002/adem.201500501.'
ieee: C. Hoppe et al., “Molecular Engineering of Aluminum-Copper Interfaces
for Joining by Plastic Deformation,” ADVANCED ENGINEERING MATERIALS, vol.
18, no. 6, pp. 1066–1074, 2016.
mla: Hoppe, Christian, et al. “Molecular Engineering of Aluminum-Copper Interfaces
for Joining by Plastic Deformation.” ADVANCED ENGINEERING MATERIALS, vol.
18, no. 6, 2016, pp. 1066–74, doi:10.1002/adem.201500501.
short: C. Hoppe, C. Ebbert, M. Voigt, H.C. Schmidt, D. Rodman, W. Homberg, H.J.
Maier, G. Grundmeier, ADVANCED ENGINEERING MATERIALS 18 (2016) 1066–1074.
date_created: 2021-01-13T10:12:47Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '35'
- _id: '302'
- _id: '321'
doi: 10.1002/adem.201500501
external_id:
isi:
- '000378684200023'
intvolume: ' 18'
isi: '1'
issue: '6'
language:
- iso: eng
page: 1066-1074
publication: ADVANCED ENGINEERING MATERIALS
publication_identifier:
eissn:
- 1527-2648
issn:
- 1438-1656
publication_status: published
quality_controlled: '1'
status: public
title: Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic
Deformation
type: journal_article
user_id: '7266'
volume: 18
year: '2016'
...
---
_id: '17320'
author:
- first_name: Jannica
full_name: Budde, Jannica
last_name: Budde
- first_name: Gudrun
full_name: Oevel, Gudrun
id: '14924'
last_name: Oevel
orcid: https://orcid.org/0000-0002-6396-9535
citation:
ama: 'Budde J, Oevel G. Innovationsmanagement an Hochschulen: Maßnahmen zur Unterstützung
der Digitalisierung von Studium und Lehre. In: Mayr HC, Pinzger M, eds. INFORMATIK
2016. Lecture Notes in Informatics (LNI). Bonn: Gesellschaft für Informatik;
2016:947-959.'
apa: 'Budde, J., & Oevel, G. (2016). Innovationsmanagement an Hochschulen: Maßnahmen
zur Unterstützung der Digitalisierung von Studium und Lehre. In H. C. Mayr &
M. Pinzger (Eds.), INFORMATIK 2016 (pp. 947–959). Bonn: Gesellschaft für
Informatik.'
bibtex: '@inproceedings{Budde_Oevel_2016, place={Bonn}, series={Lecture Notes in
Informatics (LNI)}, title={Innovationsmanagement an Hochschulen: Maßnahmen zur
Unterstützung der Digitalisierung von Studium und Lehre}, booktitle={INFORMATIK
2016}, publisher={Gesellschaft für Informatik}, author={Budde, Jannica and Oevel,
Gudrun}, editor={Mayr, Heinrich C. and Pinzger, MartinEditors}, year={2016}, pages={947–959},
collection={Lecture Notes in Informatics (LNI)} }'
chicago: 'Budde, Jannica, and Gudrun Oevel. “Innovationsmanagement an Hochschulen:
Maßnahmen zur Unterstützung der Digitalisierung von Studium und Lehre.” In INFORMATIK
2016, edited by Heinrich C. Mayr and Martin Pinzger, 947–59. Lecture Notes
in Informatics (LNI). Bonn: Gesellschaft für Informatik, 2016.'
ieee: 'J. Budde and G. Oevel, “Innovationsmanagement an Hochschulen: Maßnahmen zur
Unterstützung der Digitalisierung von Studium und Lehre,” in INFORMATIK 2016,
2016, pp. 947–959.'
mla: 'Budde, Jannica, and Gudrun Oevel. “Innovationsmanagement an Hochschulen: Maßnahmen
zur Unterstützung der Digitalisierung von Studium und Lehre.” INFORMATIK 2016,
edited by Heinrich C. Mayr and Martin Pinzger, Gesellschaft für Informatik, 2016,
pp. 947–59.'
short: 'J. Budde, G. Oevel, in: H.C. Mayr, M. Pinzger (Eds.), INFORMATIK 2016, Gesellschaft
für Informatik, Bonn, 2016, pp. 947–959.'
conference:
name: INFORMATIK 2016
date_created: 2020-06-25T10:28:08Z
date_updated: 2022-01-06T06:53:07Z
department:
- _id: '25'
editor:
- first_name: Heinrich C.
full_name: Mayr, Heinrich C.
last_name: Mayr
- first_name: Martin
full_name: Pinzger, Martin
last_name: Pinzger
language:
- iso: ger
page: 947-959
place: Bonn
publication: INFORMATIK 2016
publisher: Gesellschaft für Informatik
series_title: Lecture Notes in Informatics (LNI)
status: public
title: 'Innovationsmanagement an Hochschulen: Maßnahmen zur Unterstützung der Digitalisierung
von Studium und Lehre'
type: conference
user_id: '14932'
year: '2016'
...
---
_id: '17323'
author:
- first_name: Gudrun
full_name: Oevel, Gudrun
id: '14924'
last_name: Oevel
orcid: https://orcid.org/0000-0002-6396-9535
citation:
ama: 'Oevel G. Der Ton macht die Musik. Digitalisierung von Forschungsprozessen
nicht nur in der Musikwissenschaft. In: Richts K, Stadler P, eds. “Ei, dem
alten Herrn zoll’’ ich Achtung gern’". Festschrift für Joachim Veit zum 60. Geburtstag.”
München: Allitera; 2016:509-522.'
apa: 'Oevel, G. (2016). Der Ton macht die Musik. Digitalisierung von Forschungsprozessen
nicht nur in der Musikwissenschaft. In K. Richts & P. Stadler (Eds.), “Ei,
dem alten Herrn zoll’’ ich Achtung gern’". Festschrift für Joachim Veit zum 60.
Geburtstag” (pp. 509–522). München: Allitera.'
bibtex: '@inbook{Oevel_2016, place={München}, title={Der Ton macht die Musik. Digitalisierung
von Forschungsprozessen nicht nur in der Musikwissenschaft}, booktitle={“Ei, dem
alten Herrn zoll’’ ich Achtung gern’". Festschrift für Joachim Veit zum 60. Geburtstag”},
publisher={Allitera}, author={Oevel, Gudrun}, editor={Richts, Kristina and Stadler,
PeterEditors}, year={2016}, pages={509–522} }'
chicago: 'Oevel, Gudrun. “Der Ton macht die Musik. Digitalisierung von Forschungsprozessen
nicht nur in der Musikwissenschaft.” In “Ei, dem alten Herrn zoll’’ ich Achtung
gern’". Festschrift für Joachim Veit zum 60. Geburtstag,” edited by Kristina
Richts and Peter Stadler, 509–22. München: Allitera, 2016.'
ieee: 'G. Oevel, “Der Ton macht die Musik. Digitalisierung von Forschungsprozessen
nicht nur in der Musikwissenschaft,” in “Ei, dem alten Herrn zoll’’ ich Achtung
gern’". Festschrift für Joachim Veit zum 60. Geburtstag,” K. Richts and P.
Stadler, Eds. München: Allitera, 2016, pp. 509–522.'
mla: Oevel, Gudrun. “Der Ton macht die Musik. Digitalisierung von Forschungsprozessen
nicht nur in der Musikwissenschaft.” “Ei, dem alten Herrn zoll’’ ich Achtung
gern’". Festschrift für Joachim Veit zum 60. Geburtstag,” edited by Kristina
Richts and Peter Stadler, Allitera, 2016, pp. 509–22.
short: 'G. Oevel, in: K. Richts, P. Stadler (Eds.), “Ei, dem alten Herrn zoll’’
ich Achtung gern’". Festschrift für Joachim Veit zum 60. Geburtstag,” Allitera,
München, 2016, pp. 509–522.'
date_created: 2020-06-25T12:46:39Z
date_updated: 2022-01-06T06:53:08Z
department:
- _id: '25'
editor:
- first_name: Kristina
full_name: Richts, Kristina
last_name: Richts
- first_name: Peter
full_name: Stadler, Peter
last_name: Stadler
language:
- iso: ger
page: 509-522
place: München
publication: '"Ei, dem alten Herrn zoll'' ich Achtung gern''". Festschrift für Joachim
Veit zum 60. Geburtstag'
publisher: Allitera
status: public
title: Der Ton macht die Musik. Digitalisierung von Forschungsprozessen nicht nur
in der Musikwissenschaft
type: book_chapter
user_id: '14932'
year: '2016'
...
---
_id: '17327'
author:
- first_name: Gudrun
full_name: Oevel, Gudrun
id: '14924'
last_name: Oevel
orcid: https://orcid.org/0000-0002-6396-9535
citation:
ama: 'Oevel G. G´schichten aus dem Rechnerwald: Sieben auf einen Streich. In: von
Suchodoletz D, Schulz JC, Leendertse J, Hotzel H, Wimmer M, eds. Kooperation
von Rechenzentren. Festkolloquium für Gerhard Schneider zum 60. Geburtstag.
Berlin: De Gruyter; 2016:365-376. doi:10.1515/9783110459753-031'
apa: 'Oevel, G. (2016). G´schichten aus dem Rechnerwald: Sieben auf einen Streich.
In D. von Suchodoletz, J. C. Schulz, J. Leendertse, H. Hotzel, & M. Wimmer
(Eds.), Kooperation von Rechenzentren. Festkolloquium für Gerhard Schneider
zum 60. Geburtstag (pp. 365–376). Berlin: De Gruyter. https://doi.org/10.1515/9783110459753-031'
bibtex: '@inbook{Oevel_2016, place={Berlin}, title={G´schichten aus dem Rechnerwald:
Sieben auf einen Streich}, DOI={10.1515/9783110459753-031},
booktitle={Kooperation von Rechenzentren. Festkolloquium für Gerhard Schneider
zum 60. Geburtstag}, publisher={De Gruyter}, author={Oevel, Gudrun}, editor={von
Suchodoletz, Dirk and Schulz, Janne Chr. and Leendertse, Jan and Hotzel, Hartmut
and Wimmer, MartinEditors}, year={2016}, pages={365–376} }'
chicago: 'Oevel, Gudrun. “G´schichten aus dem Rechnerwald: Sieben auf einen Streich.”
In Kooperation von Rechenzentren. Festkolloquium für Gerhard Schneider zum
60. Geburtstag, edited by Dirk von Suchodoletz, Janne Chr. Schulz, Jan Leendertse,
Hartmut Hotzel, and Martin Wimmer, 365–76. Berlin: De Gruyter, 2016. https://doi.org/10.1515/9783110459753-031.'
ieee: 'G. Oevel, “G´schichten aus dem Rechnerwald: Sieben auf einen Streich,” in
Kooperation von Rechenzentren. Festkolloquium für Gerhard Schneider zum 60.
Geburtstag, D. von Suchodoletz, J. C. Schulz, J. Leendertse, H. Hotzel, and
M. Wimmer, Eds. Berlin: De Gruyter, 2016, pp. 365–376.'
mla: 'Oevel, Gudrun. “G´schichten aus dem Rechnerwald: Sieben auf einen Streich.”
Kooperation von Rechenzentren. Festkolloquium für Gerhard Schneider zum 60.
Geburtstag, edited by Dirk von Suchodoletz et al., De Gruyter, 2016, pp. 365–76,
doi:10.1515/9783110459753-031.'
short: 'G. Oevel, in: D. von Suchodoletz, J.C. Schulz, J. Leendertse, H. Hotzel,
M. Wimmer (Eds.), Kooperation von Rechenzentren. Festkolloquium für Gerhard Schneider
zum 60. Geburtstag, De Gruyter, Berlin, 2016, pp. 365–376.'
date_created: 2020-06-26T05:29:20Z
date_updated: 2022-01-06T06:53:08Z
department:
- _id: '25'
doi: 10.1515/9783110459753-031
editor:
- first_name: Dirk
full_name: von Suchodoletz, Dirk
last_name: von Suchodoletz
- first_name: Janne Chr.
full_name: Schulz, Janne Chr.
last_name: Schulz
- first_name: Jan
full_name: Leendertse, Jan
last_name: Leendertse
- first_name: Hartmut
full_name: Hotzel, Hartmut
last_name: Hotzel
- first_name: Martin
full_name: Wimmer, Martin
last_name: Wimmer
language:
- iso: ger
page: 365-376
place: Berlin
publication: Kooperation von Rechenzentren. Festkolloquium für Gerhard Schneider zum
60. Geburtstag
publisher: De Gruyter
status: public
title: 'G´schichten aus dem Rechnerwald: Sieben auf einen Streich'
type: book_chapter
user_id: '14932'
year: '2016'
...
---
_id: '19'
abstract:
- lang: eng
text: "Version Control Systems (VCS) are a valuable tool for software development\r\nand
document management. Both client/server and distributed (Peer-to-Peer)\r\nmodels
exist, with the latter (e.g., Git and Mercurial) becoming\r\nincreasingly popular.
Their distributed nature introduces complications,\r\nespecially concerning security:
it is hard to control the dissemination of\r\ncontents stored in distributed VCS
as they rely on replication of complete\r\nrepositories to any involved user.\r\n\r\nWe
overcome this issue by designing and implementing a concept for\r\ncryptography-enforced
access control which is transparent to the user. Use\r\nof field-tested schemes
(end-to-end encryption, digital signatures) allows\r\nfor strong security, while
adoption of convergent encryption and\r\ncontent-defined chunking retains storage
efficiency. The concept is\r\nseamlessly integrated into Mercurial---respecting
its distributed storage\r\nconcept---to ensure practical usability and compatibility
to existing\r\ndeployments."
author:
- first_name: Michael
full_name: Lass, Michael
id: '24135'
last_name: Lass
orcid: 0000-0002-5708-7632
- first_name: Dominik
full_name: Leibenger, Dominik
last_name: Leibenger
- first_name: Christoph
full_name: Sorge, Christoph
last_name: Sorge
citation:
ama: 'Lass M, Leibenger D, Sorge C. Confidentiality and Authenticity for Distributed
Version Control Systems - A Mercurial Extension. In: Proc. 41st Conference
on Local Computer Networks (LCN). IEEE; 2016. doi:10.1109/lcn.2016.11'
apa: Lass, M., Leibenger, D., & Sorge, C. (2016). Confidentiality and Authenticity
for Distributed Version Control Systems - A Mercurial Extension. In Proc. 41st
Conference on Local Computer Networks (LCN). IEEE. https://doi.org/10.1109/lcn.2016.11
bibtex: '@inproceedings{Lass_Leibenger_Sorge_2016, title={Confidentiality and Authenticity
for Distributed Version Control Systems - A Mercurial Extension}, DOI={10.1109/lcn.2016.11},
booktitle={Proc. 41st Conference on Local Computer Networks (LCN)}, publisher={IEEE},
author={Lass, Michael and Leibenger, Dominik and Sorge, Christoph}, year={2016}
}'
chicago: Lass, Michael, Dominik Leibenger, and Christoph Sorge. “Confidentiality
and Authenticity for Distributed Version Control Systems - A Mercurial Extension.”
In Proc. 41st Conference on Local Computer Networks (LCN). IEEE, 2016.
https://doi.org/10.1109/lcn.2016.11.
ieee: M. Lass, D. Leibenger, and C. Sorge, “Confidentiality and Authenticity for
Distributed Version Control Systems - A Mercurial Extension,” in Proc. 41st
Conference on Local Computer Networks (LCN), 2016.
mla: Lass, Michael, et al. “Confidentiality and Authenticity for Distributed Version
Control Systems - A Mercurial Extension.” Proc. 41st Conference on Local Computer
Networks (LCN), IEEE, 2016, doi:10.1109/lcn.2016.11.
short: 'M. Lass, D. Leibenger, C. Sorge, in: Proc. 41st Conference on Local Computer
Networks (LCN), IEEE, 2016.'
date_created: 2017-07-25T14:36:16Z
date_updated: 2022-01-06T06:53:56Z
department:
- _id: '27'
- _id: '518'
doi: 10.1109/lcn.2016.11
keyword:
- access control
- distributed version control systems
- mercurial
- peer-to-peer
- convergent encryption
- confidentiality
- authenticity
language:
- iso: eng
publication: Proc. 41st Conference on Local Computer Networks (LCN)
publication_identifier:
isbn:
- 978-1-5090-2054-6
publication_status: published
publisher: IEEE
status: public
title: Confidentiality and Authenticity for Distributed Version Control Systems -
A Mercurial Extension
type: conference
user_id: '24135'
year: '2016'
...
---
_id: '23737'
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Francesco
full_name: Quattrone, Francesco
last_name: Quattrone
- first_name: Rafael
full_name: Mrozek, Rafael
last_name: Mrozek
citation:
ama: Lammers S, Quattrone F, Mrozek R. Machbarkeitsstudie 3D Druck Elektromotoren.
Vol Nr. 1189. Forschungsvereinigung Antriebstechnik e.V.; 2016.
apa: 'Lammers, S., Quattrone, F., & Mrozek, R. (2016). Machbarkeitsstudie
3D Druck Elektromotoren: Vol. Nr. 1189. Forschungsvereinigung Antriebstechnik
e.V.'
bibtex: '@book{Lammers_Quattrone_Mrozek_2016, series={FVA Abschlussbericht }, title={Machbarkeitsstudie
3D Druck Elektromotoren}, volume={Nr. 1189}, publisher={Forschungsvereinigung
Antriebstechnik e.V.}, author={Lammers, Stefan and Quattrone, Francesco and Mrozek,
Rafael}, year={2016}, collection={FVA Abschlussbericht } }'
chicago: Lammers, Stefan, Francesco Quattrone, and Rafael Mrozek. Machbarkeitsstudie
3D Druck Elektromotoren. Vol. Nr. 1189. FVA Abschlussbericht . Forschungsvereinigung
Antriebstechnik e.V., 2016.
ieee: S. Lammers, F. Quattrone, and R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren,
vol. Nr. 1189. Forschungsvereinigung Antriebstechnik e.V., 2016.
mla: Lammers, Stefan, et al. Machbarkeitsstudie 3D Druck Elektromotoren.
Forschungsvereinigung Antriebstechnik e.V., 2016.
short: S. Lammers, F. Quattrone, R. Mrozek, Machbarkeitsstudie 3D Druck Elektromotoren,
Forschungsvereinigung Antriebstechnik e.V., 2016.
date_created: 2021-09-03T10:35:33Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
language:
- iso: ger
publication_status: published
publisher: Forschungsvereinigung Antriebstechnik e.V.
report_number: FVA 731 I
series_title: 'FVA Abschlussbericht '
status: public
title: Machbarkeitsstudie 3D Druck Elektromotoren
type: report
user_id: '13835'
volume: Nr. 1189
year: '2016'
...
---
_id: '20822'
abstract:
- lang: eng
text: 'Several examples of mechatronic systems can be found nowadays in modern cars,
production systems, and medical technology. Day by day, the number of innovative
functionalities in such mechatronic systems is increasing. These functionalities
are realized with complex software. Such software exhibits hard real-time, safety
requirements. The adherence to these requirements must be thoroughly analyzed
and verified. Moreover, to obtain a significant increment in the reliability,
performance, and efficiency of such software, it needs to maintain the self-adaptation
of its properties. In order to develop such systems with a high quality and within
a short time, we need a systematic and consistent design method. For this purpose,
the software engineering group at the University of Paderborn and the Fraunhofer
IEM in Paderborn propose the MechatronicUML method. This method provides a comprehensive
model-driven process support, that starts from requirements and reaches the executable
software after passing through several design and analysis steps. This process
improves the comprehension during development and makes complex systems manageable.
MechatronicUML emphasizes mainly on: (1) modeling and (formal) verification of
reconfigurable software architectures, (2) the coordination among system components
in such architectures, and (3) the integration of discrete software events with
the continuous behavior of control devices.'
author:
- first_name: Stefan
full_name: Dziwok, Stefan
id: '3901'
last_name: Dziwok
orcid: http://orcid.org/0000-0002-8679-6673
- first_name: Uwe
full_name: Pohlmann, Uwe
last_name: Pohlmann
- first_name: Goran
full_name: Piskachev, Goran
id: '41936'
last_name: Piskachev
orcid: 0000-0003-4424-5838
- first_name: David
full_name: Schubert, David
id: '9106'
last_name: Schubert
- first_name: Sebastian
full_name: Thiele, Sebastian
last_name: Thiele
- first_name: Christopher
full_name: Gerking, Christopher
last_name: Gerking
citation:
ama: 'Dziwok S, Pohlmann U, Piskachev G, Schubert D, Thiele S, Gerking C. The
MechatronicUML Design Method: Process and Language for Platform-Independent Modeling.;
2016.'
apa: 'Dziwok, S., Pohlmann, U., Piskachev, G., Schubert, D., Thiele, S., & Gerking,
C. (2016). The MechatronicUML Design Method: Process and Language for Platform-Independent
Modeling.'
bibtex: '@book{Dziwok_Pohlmann_Piskachev_Schubert_Thiele_Gerking_2016, place={Zukunftsmeile
1, 33102 Paderborn, Germany}, title={The MechatronicUML Design Method: Process
and Language for Platform-Independent Modeling}, author={Dziwok, Stefan and Pohlmann,
Uwe and Piskachev, Goran and Schubert, David and Thiele, Sebastian and Gerking,
Christopher}, year={2016} }'
chicago: 'Dziwok, Stefan, Uwe Pohlmann, Goran Piskachev, David Schubert, Sebastian
Thiele, and Christopher Gerking. The MechatronicUML Design Method: Process
and Language for Platform-Independent Modeling. Zukunftsmeile 1, 33102 Paderborn,
Germany, 2016.'
ieee: 'S. Dziwok, U. Pohlmann, G. Piskachev, D. Schubert, S. Thiele, and C. Gerking,
The MechatronicUML Design Method: Process and Language for Platform-Independent
Modeling. Zukunftsmeile 1, 33102 Paderborn, Germany, 2016.'
mla: 'Dziwok, Stefan, et al. The MechatronicUML Design Method: Process and Language
for Platform-Independent Modeling. 2016.'
short: 'S. Dziwok, U. Pohlmann, G. Piskachev, D. Schubert, S. Thiele, C. Gerking,
The MechatronicUML Design Method: Process and Language for Platform-Independent
Modeling, Zukunftsmeile 1, 33102 Paderborn, Germany, 2016.'
date_created: 2020-12-22T09:24:42Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '76'
- _id: '241'
language:
- iso: eng
place: Zukunftsmeile 1, 33102 Paderborn, Germany
status: public
title: 'The MechatronicUML Design Method: Process and Language for Platform-Independent
Modeling'
type: report
user_id: '5786'
year: '2016'
...
---
_id: '20823'
abstract:
- lang: eng
text: 'In this technical report, we present the MechatronicUML requirements engineering
method. The method encompasses a process and a scenario-based modeling language
for the documentation and analysis of requirements on the message-based interaction
behavior of software-intensive systems. The modeling language uses a scenario
notation based on Modal Sequence Diagrams (MSDs), which borrows concepts of UML
Interactions as well as of Live Sequence Charts. Furthermore, we introduce the
so-called Emergency Braking & Evasion System (EBEAS) as a running example, which
is based on current and upcoming real-world driver assistance systems. '
author:
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Markus
full_name: Fockel, Markus
id: '8472'
last_name: Fockel
orcid: 0000-0002-1269-0702
- first_name: Thorsten
full_name: Koch, Thorsten
id: '13616'
last_name: Koch
- first_name: David
full_name: Schmelter, David
id: '40982'
last_name: Schmelter
orcid: 0000-0001-7787-5380
- first_name: Christian
full_name: Brenner, Christian
last_name: Brenner
- first_name: Ruslan
full_name: Bernijazov, Ruslan
last_name: Bernijazov
- first_name: Marcel
full_name: Sander, Marcel
last_name: Sander
citation:
ama: 'Holtmann J, Fockel M, Koch T, et al. The MechatronicUML Requirements Engineering
Method: Process and Language.; 2016. doi:10.13140/RG.2.2.33223.29606'
apa: 'Holtmann, J., Fockel, M., Koch, T., Schmelter, D., Brenner, C., Bernijazov,
R., & Sander, M. (2016). The MechatronicUML Requirements Engineering Method:
Process and Language. https://doi.org/10.13140/RG.2.2.33223.29606'
bibtex: '@book{Holtmann_Fockel_Koch_Schmelter_Brenner_Bernijazov_Sander_2016, title={The
MechatronicUML Requirements Engineering Method: Process and Language}, DOI={10.13140/RG.2.2.33223.29606},
author={Holtmann, Jörg and Fockel, Markus and Koch, Thorsten and Schmelter, David
and Brenner, Christian and Bernijazov, Ruslan and Sander, Marcel}, year={2016}
}'
chicago: 'Holtmann, Jörg, Markus Fockel, Thorsten Koch, David Schmelter, Christian
Brenner, Ruslan Bernijazov, and Marcel Sander. The MechatronicUML Requirements
Engineering Method: Process and Language, 2016. https://doi.org/10.13140/RG.2.2.33223.29606.'
ieee: 'J. Holtmann et al., The MechatronicUML Requirements Engineering
Method: Process and Language. 2016.'
mla: 'Holtmann, Jörg, et al. The MechatronicUML Requirements Engineering Method:
Process and Language. 2016, doi:10.13140/RG.2.2.33223.29606.'
short: 'J. Holtmann, M. Fockel, T. Koch, D. Schmelter, C. Brenner, R. Bernijazov,
M. Sander, The MechatronicUML Requirements Engineering Method: Process and Language,
2016.'
date_created: 2020-12-22T09:28:23Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '76'
- _id: '241'
- _id: '662'
doi: 10.13140/RG.2.2.33223.29606
language:
- iso: eng
status: public
title: 'The MechatronicUML Requirements Engineering Method: Process and Language'
type: report
user_id: '5786'
year: '2016'
...
---
_id: '20824'
abstract:
- lang: ger
text: 'Für die Ausführung der Software müssen die Softwarekomponenten auf ECUs verteilt
werden. Dabei unterliegt die Verteilung sicherheitskritischen Constraints. Das
Suchen der optimalen und gültigen Verteilung ist sehr komplex. Die Lösung kann
effizient durch Verfahren des Operations Research ermittelt werden. Jedoch ist
die manuelle Kodierung sehr aufwändig. Dieser Beitrag stellt eine modellgetriebene
Methode und Werkzeugunterstützung vor, welche die Beschreibung von Constraints
und Optimierungen vereinfacht sowie die formale Kodierung und Lösungssuche automatisiert.
Dies erlaubt die effiziente Nutzung der Macht von formalen Modellen ohne Kenntnis
der formalen mathematischen Verfahren. Die Vorteile der Methode werden anhand
eines Beispiels aus der Automobilindustrie beschrieben. '
author:
- first_name: Uwe
full_name: Pohlmann, Uwe
last_name: Pohlmann
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
citation:
ama: 'Pohlmann U, Holtmann J, Meyer M. Das Erwachen der Macht – Automatische Softwareverteilung.
In: Tagungsband Embedded Software Engineering Kongress 2016. ; 2016:587-592.'
apa: Pohlmann, U., Holtmann, J., & Meyer, M. (2016). Das Erwachen der Macht
– Automatische Softwareverteilung. In Tagungsband Embedded Software Engineering
Kongress 2016 (pp. 587–592).
bibtex: '@inproceedings{Pohlmann_Holtmann_Meyer_2016, title={Das Erwachen der Macht
– Automatische Softwareverteilung}, booktitle={Tagungsband Embedded Software Engineering
Kongress 2016}, author={Pohlmann, Uwe and Holtmann, Jörg and Meyer, Matthias},
year={2016}, pages={587–592} }'
chicago: Pohlmann, Uwe, Jörg Holtmann, and Matthias Meyer. “Das Erwachen Der Macht
– Automatische Softwareverteilung.” In Tagungsband Embedded Software Engineering
Kongress 2016, 587–92, 2016.
ieee: U. Pohlmann, J. Holtmann, and M. Meyer, “Das Erwachen der Macht – Automatische
Softwareverteilung,” in Tagungsband Embedded Software Engineering Kongress
2016, 2016, pp. 587–592.
mla: Pohlmann, Uwe, et al. “Das Erwachen Der Macht – Automatische Softwareverteilung.”
Tagungsband Embedded Software Engineering Kongress 2016, 2016, pp. 587–92.
short: 'U. Pohlmann, J. Holtmann, M. Meyer, in: Tagungsband Embedded Software Engineering
Kongress 2016, 2016, pp. 587–592.'
date_created: 2020-12-22T09:30:16Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '241'
language:
- iso: eng
page: 587-592
publication: Tagungsband Embedded Software Engineering Kongress 2016
status: public
title: Das Erwachen der Macht – Automatische Softwareverteilung
type: conference
user_id: '15249'
year: '2016'
...
---
_id: '20826'
abstract:
- lang: eng
text: "The development of today’s technical products (e.g., in automation) is characterized
by high customer expectations regarding the product individualization, which causes
a wide range of product variants. Original equipment manufacturers (OEMs) can
apply classical approaches from product line engineering, like feature modeling,
to cope with the variability and the induced development complexity. Our tool
support for feature models integrates a variety of feature model extensions like
feature attributes and properties, logical constraints between features and feature
properties, and the distinction between features and feature realizations. Furthermore,
technical products have geometrical dimensions. The OEM specifies Computer Aided
Design (CAD) models to consider these geometric dimensions and to virtually layout
particular product variants. Geometric assembly constraints specify how parts
of the product can be arranged in a CAD model. However, a potential product customer
cannot configure an individual product variant and virtually layout this variant
in the same software tool since the respective information stems from different
sources. In order to cope with this problem, we present in this paper an extension
of our tool support for feature models to specify geometric assembly constraints.
Based on the proposed extension, we outline our research roadmap to consider these
constraints in an online shop of an e-commerce system, in which a potential customer
shall be able to configure a product variant and to virtually layout it according
to the assembly constraints.\r\n"
author:
- first_name: Thorsten
full_name: Koch, Thorsten
id: '13616'
last_name: Koch
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: David
full_name: Schubert, David
id: '9106'
last_name: Schubert
- first_name: Timo
full_name: Lindemann, Timo
last_name: Lindemann
citation:
ama: 'Koch T, Holtmann J, Schubert D, Lindemann T. Towards Feature-based Product
Line Engineering of Technical Systems. In: Trächtler A, Denkena B, Thoben K-D,
eds. 3rd International Conference on System-Integrated Intelligence: New Challenges
for Product and Production Engineering (SysInt 2016). Elsevier; 2016:447-454.
doi:10.1016/j.protcy.2016.08.057'
apa: 'Koch, T., Holtmann, J., Schubert, D., & Lindemann, T. (2016). Towards
Feature-based Product Line Engineering of Technical Systems. In A. Trächtler,
B. Denkena, & K.-D. Thoben (Eds.), 3rd International Conference on System-integrated
Intelligence: New Challenges for Product and Production Engineering (SysInt 2016)
(pp. 447–454). Elsevier. https://doi.org/10.1016/j.protcy.2016.08.057'
bibtex: '@inproceedings{Koch_Holtmann_Schubert_Lindemann_2016, title={Towards Feature-based
Product Line Engineering of Technical Systems}, DOI={10.1016/j.protcy.2016.08.057},
booktitle={3rd International Conference on System-integrated Intelligence: New
Challenges for Product and Production Engineering (SysInt 2016)}, publisher={Elsevier},
author={Koch, Thorsten and Holtmann, Jörg and Schubert, David and Lindemann, Timo},
editor={Trächtler, Ansgar and Denkena, Berend and Thoben, Klaus-DieterEditors},
year={2016}, pages={447–454} }'
chicago: 'Koch, Thorsten, Jörg Holtmann, David Schubert, and Timo Lindemann. “Towards
Feature-Based Product Line Engineering of Technical Systems.” In 3rd International
Conference on System-Integrated Intelligence: New Challenges for Product and Production
Engineering (SysInt 2016), edited by Ansgar Trächtler, Berend Denkena, and
Klaus-Dieter Thoben, 447–54. Elsevier, 2016. https://doi.org/10.1016/j.protcy.2016.08.057.'
ieee: 'T. Koch, J. Holtmann, D. Schubert, and T. Lindemann, “Towards Feature-based
Product Line Engineering of Technical Systems,” in 3rd International Conference
on System-integrated Intelligence: New Challenges for Product and Production Engineering
(SysInt 2016), 2016, pp. 447–454.'
mla: 'Koch, Thorsten, et al. “Towards Feature-Based Product Line Engineering of
Technical Systems.” 3rd International Conference on System-Integrated Intelligence:
New Challenges for Product and Production Engineering (SysInt 2016), edited
by Ansgar Trächtler et al., Elsevier, 2016, pp. 447–54, doi:10.1016/j.protcy.2016.08.057.'
short: 'T. Koch, J. Holtmann, D. Schubert, T. Lindemann, in: A. Trächtler, B. Denkena,
K.-D. Thoben (Eds.), 3rd International Conference on System-Integrated Intelligence:
New Challenges for Product and Production Engineering (SysInt 2016), Elsevier,
2016, pp. 447–454.'
date_created: 2020-12-22T09:33:36Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '241'
- _id: '662'
doi: 10.1016/j.protcy.2016.08.057
editor:
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
- first_name: Berend
full_name: Denkena, Berend
last_name: Denkena
- first_name: Klaus-Dieter
full_name: Thoben, Klaus-Dieter
last_name: Thoben
language:
- iso: eng
page: 447-454
publication: '3rd International Conference on System-integrated Intelligence: New
Challenges for Product and Production Engineering (SysInt 2016)'
publisher: Elsevier
status: public
title: Towards Feature-based Product Line Engineering of Technical Systems
type: conference
user_id: '13616'
year: '2016'
...
---
_id: '20827'
abstract:
- lang: eng
text: Cyber-physical systems like self-driving cars are highly complex and safety-critical.
This results in a great number of safety requirements that have different levels
of criticality. In automotive, the criticality is categorized in Automotive Safety
Integrity Levels (ASIL). As a high ASIL causes high development effort, the goal
is to develop most subsystems with lower ASIL requirements. To achieve this ASIL
tailoring, subsystems need to be separated or redundantly implemented. These safety
measures are usually integrated late in the development process and thus cause
costly development iterations. In this paper, we present a systematic, tool-supported
ASIL tailoring process for the requirements analysis phase. It is applied on formal
safety requirements and automatically generated fault trees for a functional view
of the system. The process supports early planning of safety efforts for mixed-criticality
systems and avoids costly late development iterations.
author:
- first_name: Markus
full_name: Fockel, Markus
id: '8472'
last_name: Fockel
orcid: 0000-0002-1269-0702
citation:
ama: 'Fockel M. ASIL Tailoring on Functional Safety Requirements. In: 5th International
Workshop on Next Generation of System Assurance Approaches for Safety-Critical
Systems (SASSUR). Vol 9923. Lecture Notes in Computer Science (LNCS). Trondheim,
Norway: Springer International Publishing Switzerland; 2016:298–310.'
apa: 'Fockel, M. (2016). ASIL Tailoring on Functional Safety Requirements. In 5th
International Workshop on Next Generation of System Assurance Approaches for Safety-Critical
Systems (SASSUR) (Vol. 9923, pp. 298–310). Trondheim, Norway: Springer International
Publishing Switzerland.'
bibtex: '@inproceedings{Fockel_2016, place={Trondheim, Norway}, series={Lecture
Notes in Computer Science (LNCS)}, title={ASIL Tailoring on Functional Safety
Requirements}, volume={9923}, booktitle={5th International Workshop on Next Generation
of System Assurance Approaches for Safety-Critical Systems (SASSUR)}, publisher={Springer
International Publishing Switzerland}, author={Fockel, Markus}, year={2016}, pages={298–310},
collection={Lecture Notes in Computer Science (LNCS)} }'
chicago: 'Fockel, Markus. “ASIL Tailoring on Functional Safety Requirements.” In
5th International Workshop on Next Generation of System Assurance Approaches
for Safety-Critical Systems (SASSUR), 9923:298–310. Lecture Notes in Computer
Science (LNCS). Trondheim, Norway: Springer International Publishing Switzerland,
2016.'
ieee: M. Fockel, “ASIL Tailoring on Functional Safety Requirements,” in 5th International
Workshop on Next Generation of System Assurance Approaches for Safety-Critical
Systems (SASSUR), 2016, vol. 9923, pp. 298–310.
mla: Fockel, Markus. “ASIL Tailoring on Functional Safety Requirements.” 5th
International Workshop on Next Generation of System Assurance Approaches for Safety-Critical
Systems (SASSUR), vol. 9923, Springer International Publishing Switzerland,
2016, pp. 298–310.
short: 'M. Fockel, in: 5th International Workshop on Next Generation of System Assurance
Approaches for Safety-Critical Systems (SASSUR), Springer International Publishing
Switzerland, Trondheim, Norway, 2016, pp. 298–310.'
date_created: 2020-12-22T09:35:16Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '241'
- _id: '662'
intvolume: ' 9923'
language:
- iso: eng
page: 298–310
place: Trondheim, Norway
publication: 5th International Workshop on Next Generation of System Assurance Approaches
for Safety-Critical Systems (SASSUR)
publisher: Springer International Publishing Switzerland
series_title: Lecture Notes in Computer Science (LNCS)
status: public
title: ASIL Tailoring on Functional Safety Requirements
type: conference
user_id: '8472'
volume: 9923
year: '2016'
...
---
_id: '20828'
abstract:
- lang: ger
text: In verschiedenen Unternehmen wird mit Anforderungen unterschiedlich umgegangen.
Je nach Größe, Branche und Unternehmenskultur ist das Thema Requirements Engineering
(RE) mal weniger, mal mehr etabliert. In einigen Unternehmen wird es als lästige
Zusatzaufgabe betrachtet, während andere Unternehmen ganze Abteilungen mit RE
als Kernkompetenz betreiben. RE wird allerdings in jedem Projekt - bewusst oder
unbewusst - durchgeführt! RE ist die Basis für den weiteren Entwicklungsprozess,
die Validierung/Verifikation und die Plan- und Messbarkeit des Projekts. Darüber
hinaus können Fehler, die auf Anforderungsebene gefunden werden, weniger aufwendig
und somit günstiger behoben werden als in späteren Entwicklungsphasen. Am Fraunhofer
IEM beraten wir Unternehmen und erforschen neue Methoden bezüglich der Entwicklung
von intelligenten technischen Systemen. In diesem Artikel berichten wir über unsere
Erfahrungen aus Projekten, in denen wir Unternehmen aus verschiedenen Branchen
und mit unterschiedlichem RE-Reifegrad zwecks Leistungssteigerung des RE begleitet
haben. Auf Basis dieser Projekterfahrungen zeigen wir Wege auf, wie der Stand
des RE mittels eines Reifegradmodells im eigenen Unternehmen verbessert werden
kann.
author:
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Markus
full_name: Fockel, Markus
id: '8472'
last_name: Fockel
orcid: 0000-0002-1269-0702
- first_name: Thorsten
full_name: Koch, Thorsten
id: '13616'
last_name: Koch
- first_name: David
full_name: Schmelter, David
id: '40982'
last_name: Schmelter
orcid: 0000-0001-7787-5380
citation:
ama: Holtmann J, Fockel M, Koch T, Schmelter D. Requirements Engineering - Zusatzaufgabe
oder Kernkompetenz? OBJEKTspektrum. 2016;(RE/2016).
apa: Holtmann, J., Fockel, M., Koch, T., & Schmelter, D. (2016). Requirements
Engineering - Zusatzaufgabe oder Kernkompetenz? OBJEKTspektrum, (RE/2016).
bibtex: '@article{Holtmann_Fockel_Koch_Schmelter_2016, title={Requirements Engineering
- Zusatzaufgabe oder Kernkompetenz?}, number={RE/2016}, journal={OBJEKTspektrum},
author={Holtmann, Jörg and Fockel, Markus and Koch, Thorsten and Schmelter, David},
year={2016} }'
chicago: Holtmann, Jörg, Markus Fockel, Thorsten Koch, and David Schmelter. “Requirements
Engineering - Zusatzaufgabe Oder Kernkompetenz?” OBJEKTspektrum, no. RE/2016
(2016).
ieee: J. Holtmann, M. Fockel, T. Koch, and D. Schmelter, “Requirements Engineering
- Zusatzaufgabe oder Kernkompetenz?,” OBJEKTspektrum, no. RE/2016, 2016.
mla: Holtmann, Jörg, et al. “Requirements Engineering - Zusatzaufgabe Oder Kernkompetenz?”
OBJEKTspektrum, no. RE/2016, 2016.
short: J. Holtmann, M. Fockel, T. Koch, D. Schmelter, OBJEKTspektrum (2016).
date_created: 2020-12-22T09:36:49Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '241'
- _id: '662'
issue: RE/2016
language:
- iso: eng
main_file_link:
- url: http://www.sigs-datacom.de/uploads/tx_dmjournals/fockel_holtmann_koch_schmelter_OTS_RE_16.pdf
publication: OBJEKTspektrum
status: public
title: Requirements Engineering - Zusatzaufgabe oder Kernkompetenz?
type: journal_article
user_id: '8472'
year: '2016'
...
---
_id: '20829'
abstract:
- lang: eng
text: The development of software-intensive technical systems involves several engineering
disciplines like mechanical, electrical, control, and particularly software engineering.
Model-based Systems Engineering (MBSE) coordinates these disciplines throughout
the development by means of discipline-spanning processes and a system model.
Such a system model provides a common understanding of the system under development
and serves as a starting point for the discipline-specific development. An integral
part of MBSE is the requirements engineering on the system level. However, these
requirements need to be refined for the discipline-specific development to start,
e.g., into specific requirements for the embedded software. Since existing MBSE
approaches lack support for this refinement step, we conceived in previous work
a systematic transition from MBSE to model-based software requirements engineering.
We automated the steps of the transition where possible, in order to avoid error-prone
and time-consuming manual tasks. In this paper, we extend this approach with support
for subsequent process iterations and provide an algorithm for the automated steps.
We illustrate the approach and perform a case study with an example of an automotive
embedded system.
author:
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Ruslan
full_name: Bernijazov, Ruslan
last_name: Bernijazov
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: David
full_name: Schmelter, David
id: '40982'
last_name: Schmelter
orcid: 0000-0001-7787-5380
- first_name: Christian
full_name: Tschirner, Christian
last_name: Tschirner
citation:
ama: Holtmann J, Bernijazov R, Meyer M, Schmelter D, Tschirner C. Integrated and
iterative systems engineering and software requirements engineering for technical
systems. Journal of Software Evolution and Process. 2016. doi:10.1002/smr.1780
apa: Holtmann, J., Bernijazov, R., Meyer, M., Schmelter, D., & Tschirner, C.
(2016). Integrated and iterative systems engineering and software requirements
engineering for technical systems. Journal of Software Evolution and Process.
https://doi.org/10.1002/smr.1780
bibtex: '@article{Holtmann_Bernijazov_Meyer_Schmelter_Tschirner_2016, title={Integrated
and iterative systems engineering and software requirements engineering for technical
systems}, DOI={10.1002/smr.1780},
journal={Journal of Software Evolution and Process}, author={Holtmann, Jörg and
Bernijazov, Ruslan and Meyer, Matthias and Schmelter, David and Tschirner, Christian},
year={2016} }'
chicago: Holtmann, Jörg, Ruslan Bernijazov, Matthias Meyer, David Schmelter, and
Christian Tschirner. “Integrated and Iterative Systems Engineering and Software
Requirements Engineering for Technical Systems.” Journal of Software Evolution
and Process, 2016. https://doi.org/10.1002/smr.1780.
ieee: J. Holtmann, R. Bernijazov, M. Meyer, D. Schmelter, and C. Tschirner, “Integrated
and iterative systems engineering and software requirements engineering for technical
systems,” Journal of Software Evolution and Process, 2016.
mla: Holtmann, Jörg, et al. “Integrated and Iterative Systems Engineering and Software
Requirements Engineering for Technical Systems.” Journal of Software Evolution
and Process, 2016, doi:10.1002/smr.1780.
short: J. Holtmann, R. Bernijazov, M. Meyer, D. Schmelter, C. Tschirner, Journal
of Software Evolution and Process (2016).
date_created: 2020-12-22T09:39:46Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '241'
- _id: '662'
doi: 10.1002/smr.1780
language:
- iso: eng
publication: Journal of Software Evolution and Process
status: public
title: Integrated and iterative systems engineering and software requirements engineering
for technical systems
type: journal_article
user_id: '40982'
year: '2016'
...
---
_id: '20830'
author:
- first_name: David
full_name: Schubert, David
id: '9106'
last_name: Schubert
- first_name: Christian
full_name: Heinzemann, Christian
last_name: Heinzemann
- first_name: Christopher
full_name: Gerking, Christopher
last_name: Gerking
citation:
ama: 'Schubert D, Heinzemann C, Gerking C. Towards Safe Execution of Reconfigurations
in Cyber-Physical Systems. In: Proceedings of the 19th International ACM Sigsoft
Symposium on Component-Based Software Engineering. ACM; 2016.'
apa: Schubert, D., Heinzemann, C., & Gerking, C. (2016). Towards Safe Execution
of Reconfigurations in Cyber-Physical Systems. Proceedings of the 19th International
ACM Sigsoft Symposium on Component-Based Software Engineering.
bibtex: '@inproceedings{Schubert_Heinzemann_Gerking_2016, title={Towards Safe Execution
of Reconfigurations in Cyber-Physical Systems}, booktitle={Proceedings of the
19th international ACM Sigsoft symposium on component-based software engineering},
publisher={ACM}, author={Schubert, David and Heinzemann, Christian and Gerking,
Christopher}, year={2016} }'
chicago: Schubert, David, Christian Heinzemann, and Christopher Gerking. “Towards
Safe Execution of Reconfigurations in Cyber-Physical Systems.” In Proceedings
of the 19th International ACM Sigsoft Symposium on Component-Based Software Engineering.
ACM, 2016.
ieee: D. Schubert, C. Heinzemann, and C. Gerking, “Towards Safe Execution of Reconfigurations
in Cyber-Physical Systems,” 2016.
mla: Schubert, David, et al. “Towards Safe Execution of Reconfigurations in Cyber-Physical
Systems.” Proceedings of the 19th International ACM Sigsoft Symposium on Component-Based
Software Engineering, ACM, 2016.
short: 'D. Schubert, C. Heinzemann, C. Gerking, in: Proceedings of the 19th International
ACM Sigsoft Symposium on Component-Based Software Engineering, ACM, 2016.'
date_created: 2020-12-22T09:41:56Z
date_updated: 2022-01-06T06:54:40Z
department:
- _id: '76'
- _id: '241'
language:
- iso: eng
publication: Proceedings of the 19th international ACM Sigsoft symposium on component-based
software engineering
publisher: ACM
status: public
title: Towards Safe Execution of Reconfigurations in Cyber-Physical Systems
type: conference
user_id: '5786'
year: '2016'
...
---
_id: '22107'
abstract:
- lang: eng
text: Die Zielsetzung beim Radfahren ist das Leistungspotential des Fahrers vollständig
auszunutzen. Dabei muss das Fahrrad optimal an die Körpermaße des Fahrers angepasst
werden. Besonders im Radrennsport ist neben dem hohen Leichtbaupotential eine
aerodynamische Sitzhaltung von enormer Bedeutung. Unter Berücksichtigung dieser
Anforderungen sind individuelle Bauteile und Strukturen zu entwickeln, da nicht
in allen Fällen die Abmessungen der Standardbauteile eine optimale Anpassung zulassen.
Im Hinblick auf einen groß gewachsenen Fahrer ist ein verlängerter Vorbau – Gabel-Lenker-Verbindung
– für eine aerodynamische Sitzhaltung und somit einen geringen Luftwiderstand
unumgänglich. Für die Herstellung solcher maßgeschneiderten Strukturen ist die
additive Fertigung aufgrund der hohen gestalterischen Freiheiten und des hohen
Individualisierungsgrades besonders geeignet. Im Rahmen dieses Beitrags wird ein
Fahrradvorbau für einen überdurchschnittlich langen Fahrer festigkeits- und leichtbauoptimiert
konstruiert und nach der Norm DIN EN ISO4210 unter Berücksichtigung der verfahrensspezifischen
Randbedingungen beziehungsweise Gestaltungsrichtlinien des Laserstrahlschmelzens
ausgelegt. Ausgangsbasis für die Geometriegestaltung sind die Grundlagen der Festigkeitsberechnung.
Ein CAD-Modell wird erstellt und aufgrund der komplexen Belastungssituation mit
Hilfe der Finite-Elemente-Methode numerisch untersucht sowie optimiert. Nach mehreren
Iterationsschritten wird für den Werkstoff TiAl6V4 ein gewichtsreduzierter überlanger
Fahrradvorbau von 140mm entwickelt und generativ hergestellt. Der anschließende
Vergleich zu einem handelsüblichen Vorbau zeigt eine Gewichtsreduktion von ca.
30%.
author:
- first_name: J.P.
full_name: Brüggemann, J.P.
last_name: Brüggemann
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
- first_name: B.
full_name: Schramm, B.
last_name: Schramm
citation:
ama: 'Brüggemann JP, Reschetnik W, Richard HA, Kullmer G, Schramm B. Festigkeits-
und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus.
In: Rapid Tech - International Trade Show & Conference for Additive Manufacturing.
; 2016:290-300. doi:10.3139/9783446450608.025'
apa: Brüggemann, J. P., Reschetnik, W., Richard, H. A., Kullmer, G., & Schramm,
B. (2016). Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines
additiv gefertigten Fahrradvorbaus. In Rapid Tech - International Trade Show
& Conference for Additive Manufacturing (pp. 290–300). https://doi.org/10.3139/9783446450608.025
bibtex: '@inproceedings{Brüggemann_Reschetnik_Richard_Kullmer_Schramm_2016, title={Festigkeits-
und leichtbauoptimierte Konstruktion und Auslegung eines additiv gefertigten Fahrradvorbaus},
DOI={10.3139/9783446450608.025},
booktitle={Rapid Tech - International Trade Show & Conference for Additive
Manufacturing}, author={Brüggemann, J.P. and Reschetnik, W. and Richard, H.A.
and Kullmer, G. and Schramm, B.}, year={2016}, pages={290–300} }'
chicago: Brüggemann, J.P., W. Reschetnik, H.A. Richard, G. Kullmer, and B. Schramm.
“Festigkeits- Und Leichtbauoptimierte Konstruktion Und Auslegung Eines Additiv
Gefertigten Fahrradvorbaus.” In Rapid Tech - International Trade Show &
Conference for Additive Manufacturing, 290–300, 2016. https://doi.org/10.3139/9783446450608.025.
ieee: J. P. Brüggemann, W. Reschetnik, H. A. Richard, G. Kullmer, and B. Schramm,
“Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv
gefertigten Fahrradvorbaus,” in Rapid Tech - International Trade Show &
Conference for Additive Manufacturing, 2016, pp. 290–300.
mla: Brüggemann, J. P., et al. “Festigkeits- Und Leichtbauoptimierte Konstruktion
Und Auslegung Eines Additiv Gefertigten Fahrradvorbaus.” Rapid Tech - International
Trade Show & Conference for Additive Manufacturing, 2016, pp. 290–300,
doi:10.3139/9783446450608.025.
short: 'J.P. Brüggemann, W. Reschetnik, H.A. Richard, G. Kullmer, B. Schramm, in:
Rapid Tech - International Trade Show & Conference for Additive Manufacturing,
2016, pp. 290–300.'
date_created: 2021-05-11T07:34:15Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
doi: 10.3139/9783446450608.025
page: 290-300
publication: Rapid Tech - International Trade Show & Conference for Additive Manufacturing
publication_identifier:
isbn:
- 978-3-446-45060-8
status: public
title: Festigkeits- und leichtbauoptimierte Konstruktion und Auslegung eines additiv
gefertigten Fahrradvorbaus
type: conference
user_id: '60486'
year: '2016'
...
---
_id: '22109'
author:
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: R.
full_name: Grylls, R.
last_name: Grylls
- first_name: B.
full_name: Bauer, B.
last_name: Bauer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
citation:
ama: 'Reschetnik W, Grylls R, Bauer B, Richard HA, Kullmer G. Fatigue Life Manipulation
of SLM Parts. In: ; 2016.'
apa: Reschetnik, W., Grylls, R., Bauer, B., Richard, H. A., & Kullmer, G. (2016).
Fatigue Life Manipulation of SLM Parts.
bibtex: '@inproceedings{Reschetnik_Grylls_Bauer_Richard_Kullmer_2016, title={Fatigue
Life Manipulation of SLM Parts}, author={Reschetnik, W. and Grylls, R. and Bauer,
B. and Richard, H.A. and Kullmer, G.}, year={2016} }'
chicago: Reschetnik, W., R. Grylls, B. Bauer, H.A. Richard, and G. Kullmer. “Fatigue
Life Manipulation of SLM Parts,” 2016.
ieee: W. Reschetnik, R. Grylls, B. Bauer, H. A. Richard, and G. Kullmer, “Fatigue
Life Manipulation of SLM Parts,” 2016.
mla: Reschetnik, W., et al. Fatigue Life Manipulation of SLM Parts. 2016.
short: 'W. Reschetnik, R. Grylls, B. Bauer, H.A. Richard, G. Kullmer, in: 2016.'
date_created: 2021-05-11T07:47:53Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
status: public
title: Fatigue Life Manipulation of SLM Parts
type: conference
user_id: '60486'
year: '2016'
...
---
_id: '22128'
author:
- first_name: J.P.
full_name: Brüggemann, J.P.
last_name: Brüggemann
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: M.E.
full_name: Aydinöz, M.E.
last_name: Aydinöz
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
- first_name: M.
full_name: Schaper, M.
last_name: Schaper
citation:
ama: 'Brüggemann JP, Riemer A, Reschetnik W, et al. Optimierung von Fahrradtretkurbeln
mittels additiver Fertigung. In: DVM - Tagung - Additiv Gefertigte Bauteile
Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V.
; 2016:101-112.'
apa: Brüggemann, J. P., Riemer, A., Reschetnik, W., Aydinöz, M. E., Kullmer, G.,
Richard, H. A., & Schaper, M. (2016). Optimierung von Fahrradtretkurbeln mittels
additiver Fertigung. In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen,
Deutscher Verband für Materialforschung und -prüfung e.V. (pp. 101–112).
bibtex: '@inproceedings{Brüggemann_Riemer_Reschetnik_Aydinöz_Kullmer_Richard_Schaper_2016,
title={Optimierung von Fahrradtretkurbeln mittels additiver Fertigung}, booktitle={DVM
- Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung
und -prüfung e.V.}, author={Brüggemann, J.P. and Riemer, A. and Reschetnik, W.
and Aydinöz, M.E. and Kullmer, G. and Richard, H.A. and Schaper, M.}, year={2016},
pages={101–112} }'
chicago: Brüggemann, J.P., A. Riemer, W. Reschetnik, M.E. Aydinöz, G. Kullmer, H.A.
Richard, and M. Schaper. “Optimierung von Fahrradtretkurbeln Mittels Additiver
Fertigung.” In DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher
Verband Für Materialforschung Und -Prüfung e.V., 101–12, 2016.
ieee: J. P. Brüggemann et al., “Optimierung von Fahrradtretkurbeln mittels
additiver Fertigung,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen,
Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 101–112.
mla: Brüggemann, J. P., et al. “Optimierung von Fahrradtretkurbeln Mittels Additiver
Fertigung.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher
Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–12.
short: 'J.P. Brüggemann, A. Riemer, W. Reschetnik, M.E. Aydinöz, G. Kullmer, H.A.
Richard, M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen,
Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 101–112.'
date_created: 2021-05-11T07:48:16Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
page: 101-112
publication: DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher
Verband für Materialforschung und -prüfung e.V.
status: public
title: Optimierung von Fahrradtretkurbeln mittels additiver Fertigung
type: conference
user_id: '60486'
year: '2016'
...
---
_id: '22130'
author:
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: J.P.
full_name: Brüggemann, J.P.
last_name: Brüggemann
- first_name: M.E.
full_name: Aydinöz, M.E.
last_name: Aydinöz
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
- first_name: M.
full_name: Schaper, M.
last_name: Schaper
citation:
ama: 'Reschetnik W, Brüggemann JP, Aydinöz ME, Kullmer G, Richard HA, Schaper M.
Lebensdauerbeeinflussung durch Additive Fertigung. In: DVM - Tagung - Additiv
Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und
-Prüfung e.V. ; 2016:131-140.'
apa: Reschetnik, W., Brüggemann, J. P., Aydinöz, M. E., Kullmer, G., Richard, H.
A., & Schaper, M. (2016). Lebensdauerbeeinflussung durch Additive Fertigung.
In DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband
für Materialforschung und -prüfung e.V. (pp. 131–140).
bibtex: '@inproceedings{Reschetnik_Brüggemann_Aydinöz_Kullmer_Richard_Schaper_2016,
title={Lebensdauerbeeinflussung durch Additive Fertigung}, booktitle={DVM - Tagung
- Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung
und -prüfung e.V.}, author={Reschetnik, W. and Brüggemann, J.P. and Aydinöz, M.E.
and Kullmer, G. and Richard, H.A. and Schaper, M.}, year={2016}, pages={131–140}
}'
chicago: Reschetnik, W., J.P. Brüggemann, M.E. Aydinöz, G. Kullmer, H.A. Richard,
and M. Schaper. “Lebensdauerbeeinflussung Durch Additive Fertigung.” In DVM
- Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung
Und -Prüfung e.V., 131–40, 2016.
ieee: W. Reschetnik, J. P. Brüggemann, M. E. Aydinöz, G. Kullmer, H. A. Richard,
and M. Schaper, “Lebensdauerbeeinflussung durch Additive Fertigung,” in DVM
- Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung
und -prüfung e.V., 2016, pp. 131–140.
mla: Reschetnik, W., et al. “Lebensdauerbeeinflussung Durch Additive Fertigung.”
DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband
Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–40.
short: 'W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, G. Kullmer, H.A. Richard,
M. Schaper, in: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher
Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 131–140.'
date_created: 2021-05-11T07:48:18Z
date_updated: 2022-01-06T06:55:27Z
department:
- _id: '143'
- _id: '219'
page: 131-140
publication: DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher
Verband für Materialforschung und -prüfung e.V.
status: public
title: Lebensdauerbeeinflussung durch Additive Fertigung
type: conference
user_id: '60486'
year: '2016'
...
---
_id: '22132'
author:
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: L.
full_name: Leuders, L.
last_name: Leuders
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
citation:
ama: 'Riemer A, Leuders L, Kullmer G, Richard HA. Materialkennwerte lasergeschmolzener
Werkstoffe. In: DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen,
Deutscher Verband Für Materialforschung Und -Prüfung e.V. ; 2016:161-174.'
apa: Riemer, A., Leuders, L., Kullmer, G., & Richard, H. A. (2016). Materialkennwerte
lasergeschmolzener Werkstoffe. In DVM - Tagung - Additiv gefertigte Bauteile
und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V.
(pp. 161–174).
bibtex: '@inproceedings{Riemer_Leuders_Kullmer_Richard_2016, title={Materialkennwerte
lasergeschmolzener Werkstoffe}, booktitle={DVM - Tagung - Additiv gefertigte Bauteile
und Strukturen, Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Riemer,
A. and Leuders, L. and Kullmer, G. and Richard, H.A.}, year={2016}, pages={161–174}
}'
chicago: Riemer, A., L. Leuders, G. Kullmer, and H.A. Richard. “Materialkennwerte
Lasergeschmolzener Werkstoffe.” In DVM - Tagung - Additiv Gefertigte Bauteile
Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V.,
161–74, 2016.
ieee: A. Riemer, L. Leuders, G. Kullmer, and H. A. Richard, “Materialkennwerte lasergeschmolzener
Werkstoffe,” in DVM - Tagung - Additiv gefertigte Bauteile und Strukturen,
Deutscher Verband für Materialforschung und -prüfung e.V., 2016, pp. 161–174.
mla: Riemer, A., et al. “Materialkennwerte Lasergeschmolzener Werkstoffe.” DVM
- Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung
Und -Prüfung e.V., 2016, pp. 161–74.
short: 'A. Riemer, L. Leuders, G. Kullmer, H.A. Richard, in: DVM - Tagung - Additiv
Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und
-Prüfung e.V., 2016, pp. 161–174.'
date_created: 2021-05-11T07:48:21Z
date_updated: 2022-01-06T06:55:27Z
department:
- _id: '143'
- _id: '219'
page: 161-174
publication: DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher
Verband für Materialforschung und -prüfung e.V.
status: public
title: Materialkennwerte lasergeschmolzener Werkstoffe
type: conference
user_id: '60486'
year: '2016'
...
---
_id: '22146'
abstract:
- lang: eng
text: manufacturing in electrical engineering applications.
author:
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: J.P.
full_name: Brüggemann, J.P.
last_name: Brüggemann
- first_name: M.E.
full_name: Aydinöz, M.E.
last_name: Aydinöz
- first_name: O.
full_name: Grydin, O.
last_name: Grydin
- first_name: K.P.
full_name: Hoyer, K.P.
last_name: Hoyer
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
citation:
ama: 'Reschetnik W, Brüggemann JP, Aydinöz ME, et al. Fatigue crack growth behavior
and mechanical properties of additively processed EN AW-7075 aluminium alloy.
In: Procedia Structural Integrity. ; 2016:3040-3048.'
apa: Reschetnik, W., Brüggemann, J. P., Aydinöz, M. E., Grydin, O., Hoyer, K. P.,
Kullmer, G., & Richard, H. A. (2016). Fatigue crack growth behavior and mechanical
properties of additively processed EN AW-7075 aluminium alloy. In Procedia
Structural Integrity (pp. 3040–3048).
bibtex: '@inproceedings{Reschetnik_Brüggemann_Aydinöz_Grydin_Hoyer_Kullmer_Richard_2016,
title={Fatigue crack growth behavior and mechanical properties of additively processed
EN AW-7075 aluminium alloy}, booktitle={Procedia Structural Integrity}, author={Reschetnik,
W. and Brüggemann, J.P. and Aydinöz, M.E. and Grydin, O. and Hoyer, K.P. and Kullmer,
G. and Richard, H.A.}, year={2016}, pages={3040–3048} }'
chicago: Reschetnik, W., J.P. Brüggemann, M.E. Aydinöz, O. Grydin, K.P. Hoyer, G.
Kullmer, and H.A. Richard. “Fatigue Crack Growth Behavior and Mechanical Properties
of Additively Processed EN AW-7075 Aluminium Alloy.” In Procedia Structural
Integrity, 3040–48, 2016.
ieee: W. Reschetnik et al., “Fatigue crack growth behavior and mechanical
properties of additively processed EN AW-7075 aluminium alloy,” in Procedia
Structural Integrity, 2016, pp. 3040–3048.
mla: Reschetnik, W., et al. “Fatigue Crack Growth Behavior and Mechanical Properties
of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity,
2016, pp. 3040–48.
short: 'W. Reschetnik, J.P. Brüggemann, M.E. Aydinöz, O. Grydin, K.P. Hoyer, G.
Kullmer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 3040–3048.'
date_created: 2021-05-11T07:48:37Z
date_updated: 2022-01-06T06:55:27Z
department:
- _id: '143'
- _id: '219'
page: 3040-3048
publication: Procedia Structural Integrity
status: public
title: Fatigue crack growth behavior and mechanical properties of additively processed
EN AW-7075 aluminium alloy
type: conference
user_id: '60486'
year: '2016'
...