---
_id: '22149'
author:
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
citation:
ama: 'Riemer A, Richard HA. Crack Propagation in Additive Manufactured Materials
and Structures. In: Procedia Structural Integrity. ; 2016:1229-1236.'
apa: Riemer, A., & Richard, H. A. (2016). Crack Propagation in Additive Manufactured
Materials and Structures. In Procedia Structural Integrity (pp. 1229–1236).
bibtex: '@inproceedings{Riemer_Richard_2016, title={Crack Propagation in Additive
Manufactured Materials and Structures}, booktitle={Procedia Structural Integrity},
author={Riemer, A. and Richard, H.A.}, year={2016}, pages={1229–1236} }'
chicago: Riemer, A., and H.A. Richard. “Crack Propagation in Additive Manufactured
Materials and Structures.” In Procedia Structural Integrity, 1229–36, 2016.
ieee: A. Riemer and H. A. Richard, “Crack Propagation in Additive Manufactured Materials
and Structures,” in Procedia Structural Integrity, 2016, pp. 1229–1236.
mla: Riemer, A., and H. A. Richard. “Crack Propagation in Additive Manufactured
Materials and Structures.” Procedia Structural Integrity, 2016, pp. 1229–36.
short: 'A. Riemer, H.A. Richard, in: Procedia Structural Integrity, 2016, pp. 1229–1236.'
date_created: 2021-05-11T07:48:41Z
date_updated: 2022-01-06T06:55:27Z
department:
- _id: '143'
- _id: '219'
page: 1229-1236
publication: Procedia Structural Integrity
status: public
title: Crack Propagation in Additive Manufactured Materials and Structures
type: conference
user_id: '60486'
year: '2016'
...
---
_id: '22180'
abstract:
- lang: eng
text: The implementation of lattice structures into additive manufactured parts
is an important method to decrease part weight maintaining a high specific payload.
However, the manufacturability of lattice structures and mechanical properties
for polymer laser sintering are quite unknown yet. To examine the manufacturability,
sandwich structures with different cell types, cell sizes and lattice bar widths
were designed, manufactured and evaluated. A decisive criterion is for example
a sufficient powder removal. In a second step, manufacturable structures were
analyzed using four-point-bending tests. Experimental data is compared to the
density of the lattice structures and allows for a direct comparison of different
cell types with varied geometrical attributes. The results of this work are guidelines
for the design and dimensioning of laser sintered lattice structures.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Dennis
full_name: Menge, Dennis
id: '29240'
last_name: Menge
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Delfs P, Menge D, Schmid H-J. Manufacturability and Mechanical
Characterization of Laser Sintered Lattice Structures. In: 27th Annual International
Solid Freeform Fabrication Symposium . Vol 27. ; 2016:2077-2086. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf'
apa: Josupeit, S., Delfs, P., Menge, D., & Schmid, H.-J. (2016). Manufacturability
and Mechanical Characterization of Laser Sintered Lattice Structures. In 27th
Annual International Solid Freeform Fabrication Symposium (Vol. 27, pp. 2077–2086).
http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Delfs_Menge_Schmid_2016, title={Manufacturability
and Mechanical Characterization of Laser Sintered Lattice Structures}, volume={27},
DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf},
booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Josupeit,
Stefan and Delfs, Patrick and Menge, Dennis and Schmid, Hans-Joachim}, year={2016},
pages={2077–2086} }'
chicago: Josupeit, Stefan, Patrick Delfs, Dennis Menge, and Hans-Joachim Schmid.
“Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.”
In 27th Annual International Solid Freeform Fabrication Symposium , 27:2077–86,
2016. http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
ieee: S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and
Mechanical Characterization of Laser Sintered Lattice Structures,” in 27th
Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27,
pp. 2077–2086.
mla: Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization
of Laser Sintered Lattice Structures.” 27th Annual International Solid Freeform
Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
short: 'S. Josupeit, P. Delfs, D. Menge, H.-J. Schmid, in: 27th Annual International
Solid Freeform Fabrication Symposium , 2016, pp. 2077–2086.'
date_created: 2021-05-14T07:46:10Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf
intvolume: ' 27'
language:
- iso: eng
page: 2077-2086
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Manufacturability and Mechanical Characterization of Laser Sintered Lattice
Structures
type: conference
user_id: '71545'
volume: 27
year: '2016'
...
---
_id: '22185'
abstract:
- lang: eng
text: The layered structure of Additive Manufacturing processes results in a stair-
stepping effect of the surface topographies. In general, the impact of this effect
strongly depends on the build angle of a surface, whereas the overall surface
roughness is additionally caused by the resolution of the specific AM process.
The aim of this work is the prediction of the surface quality in dependence of
the building orientation of a part. These results can finally be used to optimize
the orientation to get a desired surface quality. As not all parts of the component
surface are equally important, a preselection of areas can be used to improve
the overall surface quality of relevant areas. The model uses the digital AMF
format of a part. Each triangle is assigned with a roughness value and by testing
different orientations the best one can be found. This approach needs a database
for the surface qualities. This must be done separately for each Additive Manufacturing
process and is shown exemplarily with a surface topography simulation for the
laser sintering process.
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Marcel
full_name: Tows, Marcel
last_name: Tows
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: Delfs P, Tows M, Schmid H-J. Optimized build orientation of additive manufactured
parts for improved surface quality and build time. Additive Manufacturing.
2016;2(12, Part B):214-320. doi:10.1016/j.addma.2016.06.003
apa: Delfs, P., Tows, M., & Schmid, H.-J. (2016). Optimized build orientation
of additive manufactured parts for improved surface quality and build time. Additive
Manufacturing, 2(12, Part B), 214–320. https://doi.org/10.1016/j.addma.2016.06.003
bibtex: '@article{Delfs_Tows_Schmid_2016, title={Optimized build orientation of
additive manufactured parts for improved surface quality and build time}, volume={2},
DOI={10.1016/j.addma.2016.06.003},
number={12, Part B}, journal={Additive Manufacturing}, publisher={Elsevier}, author={Delfs,
Patrick and Tows, Marcel and Schmid, Hans-Joachim}, year={2016}, pages={214–320}
}'
chicago: 'Delfs, Patrick, Marcel Tows, and Hans-Joachim Schmid. “Optimized Build
Orientation of Additive Manufactured Parts for Improved Surface Quality and Build
Time.” Additive Manufacturing 2, no. 12, Part B (2016): 214–320. https://doi.org/10.1016/j.addma.2016.06.003.'
ieee: P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive
manufactured parts for improved surface quality and build time,” Additive Manufacturing,
vol. 2, no. 12, Part B, pp. 214–320, 2016.
mla: Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured
Parts for Improved Surface Quality and Build Time.” Additive Manufacturing,
vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.
short: P. Delfs, M. Tows, H.-J. Schmid, Additive Manufacturing 2 (2016) 214–320.
date_created: 2021-05-14T07:46:16Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1016/j.addma.2016.06.003
intvolume: ' 2'
issue: 12, Part B
language:
- iso: eng
page: 214-320
publication: Additive Manufacturing
publication_identifier:
isbn:
- 2214-8604
publisher: Elsevier
status: public
title: Optimized build orientation of additive manufactured parts for improved surface
quality and build time
type: journal_article
user_id: '71545'
volume: 2
year: '2016'
...
---
_id: '22190'
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Schmid H-J. Extended Analysis of the Surface Topography of Laser
Sintered Polymer Parts . In: Fraunhofer Direct Digital Manufacturing Conference.
Vol 3. ; 2016:411-414. doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#'
apa: Delfs, P., & Schmid, H.-J. (2016). Extended Analysis of the Surface Topography
of Laser Sintered Polymer Parts . In Fraunhofer Direct Digital Manufacturing
Conference (Vol. 3, pp. 411–414). https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#
bibtex: '@inproceedings{Delfs_Schmid_2016, title={Extended Analysis of the Surface
Topography of Laser Sintered Polymer Parts }, volume={3}, DOI={https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#},
booktitle={Fraunhofer Direct Digital Manufacturing Conference}, author={Delfs,
Patrick and Schmid, Hans-Joachim}, year={2016}, pages={411–414} }'
chicago: Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface
Topography of Laser Sintered Polymer Parts .” In Fraunhofer Direct Digital
Manufacturing Conference, 3:411–14, 2016. https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
ieee: P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of
Laser Sintered Polymer Parts ,” in Fraunhofer Direct Digital Manufacturing
Conference, 2016, vol. 3, pp. 411–414.
mla: Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface
Topography of Laser Sintered Polymer Parts .” Fraunhofer Direct Digital Manufacturing
Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
short: 'P. Delfs, H.-J. Schmid, in: Fraunhofer Direct Digital Manufacturing Conference,
2016, pp. 411–414.'
date_created: 2021-05-14T07:46:21Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#
intvolume: ' 3'
language:
- iso: eng
page: 411-414
publication: Fraunhofer Direct Digital Manufacturing Conference
publication_identifier:
isbn:
- 978-3-8396-1001-5
status: public
title: 'Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts '
type: conference
user_id: '71545'
volume: 3
year: '2016'
...
---
_id: '22194'
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Schmid H-J. Thermal properties of polyamide 12 powder for application
in laser sintering. In: International Congress on Particle Technology (PARTEC)
. ; 2016.'
apa: Josupeit, S., & Schmid, H.-J. (2016). Thermal properties of polyamide 12
powder for application in laser sintering. In International Congress on Particle
Technology (PARTEC) .
bibtex: '@inproceedings{Josupeit_Schmid_2016, title={Thermal properties of polyamide
12 powder for application in laser sintering}, booktitle={International Congress
on Particle Technology (PARTEC) }, author={Josupeit, Stefan and Schmid, Hans-Joachim},
year={2016} }'
chicago: Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide
12 Powder for Application in Laser Sintering.” In International Congress on
Particle Technology (PARTEC) , 2016.
ieee: S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for
application in laser sintering,” in International Congress on Particle Technology
(PARTEC) , 2016.
mla: Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide
12 Powder for Application in Laser Sintering.” International Congress on Particle
Technology (PARTEC) , 2016.
short: 'S. Josupeit, H.-J. Schmid, in: International Congress on Particle Technology
(PARTEC) , 2016.'
date_created: 2021-05-14T07:46:26Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
language:
- iso: eng
publication: 'International Congress on Particle Technology (PARTEC) '
status: public
title: Thermal properties of polyamide 12 powder for application in laser sintering
type: conference
user_id: '71545'
year: '2016'
...
---
_id: '22200'
abstract:
- lang: eng
text: In the polymer laser sinter process, part quality depends on many influencing
factors along the process chain. For application of the technology in series production
and an integration of laser sintered parts into a technical environment, the dimensional
accuracy of parts has to be taken into account. Therefore, occuring deviatons
and their scattering have to be reduced and homogenized based on process parameters
and build job layout. In this work, the dimensional accuracy of laser sintered
parts is analyzed for varied parameter values. Influences of different process
and geometrical build job parameters on dimensional deviatons are figured out.
The experimental results allow an evaluation of more and less important influences.
Finally, measures are deduced to reduce and homogenize dimensional deviations.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Monika
full_name: Gessler, Monika
last_name: Gessler
- first_name: H.
full_name: Pfisterer, H.
last_name: Pfisterer
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Delfs P, Lieneke T, et al. Dimensional accuracy of polymer laser
sintered parts: Influences and measures. In: Rapid Tech - International Trade
Show & Conference for Additive Manufacturing . ; 2016:107-120. doi:10.3139/9783446450608.009'
apa: 'Josupeit, S., Delfs, P., Lieneke, T., Adam, G., Gessler, M., Pfisterer, H.,
& Schmid, H.-J. (2016). Dimensional accuracy of polymer laser sintered parts:
Influences and measures. In Rapid Tech - International Trade Show & Conference
for Additive Manufacturing (pp. 107–120). https://doi.org/10.3139/9783446450608.009'
bibtex: '@inproceedings{Josupeit_Delfs_Lieneke_Adam_Gessler_Pfisterer_Schmid_2016,
title={Dimensional accuracy of polymer laser sintered parts: Influences and measures},
DOI={10.3139/9783446450608.009},
booktitle={Rapid Tech - International Trade Show & Conference for Additive
Manufacturing }, author={Josupeit, Stefan and Delfs, Patrick and Lieneke, Tobias
and Adam, Guido and Gessler, Monika and Pfisterer, H. and Schmid, Hans-Joachim},
year={2016}, pages={107–120} }'
chicago: 'Josupeit, Stefan, Patrick Delfs, Tobias Lieneke, Guido Adam, Monika Gessler,
H. Pfisterer, and Hans-Joachim Schmid. “Dimensional Accuracy of Polymer Laser
Sintered Parts: Influences and Measures.” In Rapid Tech - International Trade
Show & Conference for Additive Manufacturing , 107–20, 2016. https://doi.org/10.3139/9783446450608.009.'
ieee: 'S. Josupeit et al., “Dimensional accuracy of polymer laser sintered
parts: Influences and measures,” in Rapid Tech - International Trade Show &
Conference for Additive Manufacturing , 2016, pp. 107–120.'
mla: 'Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts:
Influences and Measures.” Rapid Tech - International Trade Show & Conference
for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.'
short: 'S. Josupeit, P. Delfs, T. Lieneke, G. Adam, M. Gessler, H. Pfisterer, H.-J.
Schmid, in: Rapid Tech - International Trade Show & Conference for Additive
Manufacturing , 2016, pp. 107–120.'
date_created: 2021-05-14T07:46:33Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
- _id: '146'
doi: 10.3139/9783446450608.009
language:
- iso: eng
page: 107-120
publication: 'Rapid Tech - International Trade Show & Conference for Additive Manufacturing '
publication_identifier:
isbn:
- 978-3-446-45060-8
status: public
title: 'Dimensional accuracy of polymer laser sintered parts: Influences and measures'
type: conference
user_id: '71545'
year: '2016'
...
---
_id: '22403'
abstract:
- lang: eng
text: Additive manufacturing processes offer great freedom in the design of components.
This enables a high level of function integration. Also in terms of vibration
damping, additive manufacturing yields opportunities for the selective implementation
of damping functions due to their characteristics. In powder-based processes the
disperse support material can be kept inside the cavities of the structure. This
powder material can act as a particle damper. Due to the freedoms in design, the
damping behavior can be adjusted selectively by varying the geometrical features
of the cavities. Within this paper, investigations on the damping behavior of
additive manufactured parts regarding free bending vibrations are focused.
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Künneke T, Zimmer D. Funktionsintegration additiv gefertigter Dämpfungsstrukturen
bei Biegeschwingungen. In: DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen.
; 2016:151-160.'
apa: Künneke, T., & Zimmer, D. (2016). Funktionsintegration additiv gefertigter
Dämpfungsstrukturen bei Biegeschwingungen. In DVM Tagung - Additiv gefertigte
Bauteile und Strukturen (pp. 151–160).
bibtex: '@inproceedings{Künneke_Zimmer_2016, title={Funktionsintegration additiv
gefertigter Dämpfungsstrukturen bei Biegeschwingungen}, booktitle={DVM Tagung
- Additiv gefertigte Bauteile und Strukturen}, author={Künneke, Thomas and Zimmer,
Detmar}, year={2016}, pages={151–160} }'
chicago: Künneke, Thomas, and Detmar Zimmer. “Funktionsintegration Additiv Gefertigter
Dämpfungsstrukturen Bei Biegeschwingungen.” In DVM Tagung - Additiv Gefertigte
Bauteile Und Strukturen, 151–60, 2016.
ieee: T. Künneke and D. Zimmer, “Funktionsintegration additiv gefertigter Dämpfungsstrukturen
bei Biegeschwingungen,” in DVM Tagung - Additiv gefertigte Bauteile und Strukturen,
2016, pp. 151–160.
mla: Künneke, Thomas, and Detmar Zimmer. “Funktionsintegration Additiv Gefertigter
Dämpfungsstrukturen Bei Biegeschwingungen.” DVM Tagung - Additiv Gefertigte
Bauteile Und Strukturen, 2016, pp. 151–60.
short: 'T. Künneke, D. Zimmer, in: DVM Tagung - Additiv Gefertigte Bauteile Und
Strukturen, 2016, pp. 151–160.'
date_created: 2021-06-15T11:09:30Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
page: 151-160
publication: DVM Tagung - Additiv gefertigte Bauteile und Strukturen
status: public
title: Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '22404'
abstract:
- lang: eng
text: Additive Manufacturing (AM), also known as 3D printing, is a relatively new
technology which enables the toolless production of components and entire assemblies
directly from a CAD file. Today, the technology is still not widely used in industrial
production. It is mainly limited to special applications, although it shows great
potential. In this paper, first approaches are shown to apply AM to the production
of rotors for permanent magnet synchronous machines (PMSM). The possibilities
of a lightweight design with a low moment of inertia as well as the influence
on the magnetic anisotropy for an improved sensorless control of PMSM are pointed
out. The results clearly demonstrate the great potential of additive manufacturing
in electrical engineering applications.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
- first_name: Rafael
full_name: Mrozek, Rafael
last_name: Mrozek
- first_name: Rainer
full_name: Oberacker, Rainer
last_name: Oberacker
- first_name: Michael
full_name: Hoffmann, Michael
last_name: Hoffmann
- first_name: Francesco
full_name: Quattrone, Francesco
last_name: Quattrone
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
citation:
ama: 'Lammers S, Adam G, Schmid H-J, et al. Additive Manufacturing of a Lightweight
Rotor for a Permanent Magnet Synchronous Machine. In: EDPC 2016. ; 2016.
doi:10.1109/EDPC.2016.7851312'
apa: Lammers, S., Adam, G., Schmid, H.-J., Mrozek, R., Oberacker, R., Hoffmann,
M., … Ponick, B. (2016). Additive Manufacturing of a Lightweight Rotor for a Permanent
Magnet Synchronous Machine. In EDPC 2016. https://doi.org/10.1109/EDPC.2016.7851312
bibtex: '@inproceedings{Lammers_Adam_Schmid_Mrozek_Oberacker_Hoffmann_Quattrone_Ponick_2016,
title={Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous
Machine}, DOI={10.1109/EDPC.2016.7851312},
booktitle={EDPC 2016}, author={Lammers, Stefan and Adam, Guido and Schmid, Hans-Joachim
and Mrozek, Rafael and Oberacker, Rainer and Hoffmann, Michael and Quattrone,
Francesco and Ponick, Bernd}, year={2016} }'
chicago: Lammers, Stefan, Guido Adam, Hans-Joachim Schmid, Rafael Mrozek, Rainer
Oberacker, Michael Hoffmann, Francesco Quattrone, and Bernd Ponick. “Additive
Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.”
In EDPC 2016, 2016. https://doi.org/10.1109/EDPC.2016.7851312.
ieee: S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for
a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
mla: Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for
a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
short: 'S. Lammers, G. Adam, H.-J. Schmid, R. Mrozek, R. Oberacker, M. Hoffmann,
F. Quattrone, B. Ponick, in: EDPC 2016, 2016.'
date_created: 2021-06-15T11:09:32Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1109/EDPC.2016.7851312
language:
- iso: eng
publication: EDPC 2016
publication_identifier:
isbn:
- 978-1-5090-2908-2
status: public
title: Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous
Machine
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '22408'
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Delfs P, Lieneke T, Schmid H-J. Influences on the dimensional
Accuracy of Laser Sintered Parts along the Process Chain. In: 27th Annual International
Solid Freeform Fabrication Symposium . ; 2016.'
apa: Josupeit, S., Delfs, P., Lieneke, T., & Schmid, H.-J. (2016). Influences
on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In
27th Annual International Solid Freeform Fabrication Symposium .
bibtex: '@inproceedings{Josupeit_Delfs_Lieneke_Schmid_2016, title={Influences on
the dimensional Accuracy of Laser Sintered Parts along the Process Chain}, booktitle={27th
Annual International Solid Freeform Fabrication Symposium }, author={Josupeit,
Stefan and Delfs, Patrick and Lieneke, Tobias and Schmid, Hans-Joachim}, year={2016}
}'
chicago: Josupeit, Stefan, Patrick Delfs, Tobias Lieneke, and Hans-Joachim Schmid.
“Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process
Chain.” In 27th Annual International Solid Freeform Fabrication Symposium ,
2016.
ieee: S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional
Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International
Solid Freeform Fabrication Symposium , 2016.
mla: Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered
Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication
Symposium , 2016.
short: 'S. Josupeit, P. Delfs, T. Lieneke, H.-J. Schmid, in: 27th Annual International
Solid Freeform Fabrication Symposium , 2016.'
date_created: 2021-06-15T11:09:36Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '150'
language:
- iso: eng
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Influences on the dimensional Accuracy of Laser Sintered Parts along the Process
Chain
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '22409'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Stefan
full_name: de Groot, Stefan
last_name: de Groot
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, de Groot S, Adam G, Zimmer D. Dimensional tolerances for additive
manufacturing: Experimental investigation of manufacturing accuracy for selective
laser melting. In: ASPE 2016 Summer Topical Meeting. ; 2016:S.9-15.'
apa: 'Lieneke, T., de Groot, S., Adam, G., & Zimmer, D. (2016). Dimensional
tolerances for additive manufacturing: Experimental investigation of manufacturing
accuracy for selective laser melting. In ASPE 2016 Summer Topical Meeting
(p. S.9-15).'
bibtex: '@inproceedings{Lieneke_de Groot_Adam_Zimmer_2016, title={Dimensional tolerances
for additive manufacturing: Experimental investigation of manufacturing accuracy
for selective laser melting}, booktitle={ASPE 2016 Summer Topical Meeting}, author={Lieneke,
Tobias and de Groot, Stefan and Adam, Guido and Zimmer, Detmar}, year={2016},
pages={S.9-15} }'
chicago: 'Lieneke, Tobias, Stefan de Groot, Guido Adam, and Detmar Zimmer. “Dimensional
Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing
Accuracy for Selective Laser Melting.” In ASPE 2016 Summer Topical Meeting,
S.9-15, 2016.'
ieee: 'T. Lieneke, S. de Groot, G. Adam, and D. Zimmer, “Dimensional tolerances
for additive manufacturing: Experimental investigation of manufacturing accuracy
for selective laser melting,” in ASPE 2016 Summer Topical Meeting, 2016,
p. S.9-15.'
mla: 'Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing:
Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.”
ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.'
short: 'T. Lieneke, S. de Groot, G. Adam, D. Zimmer, in: ASPE 2016 Summer Topical
Meeting, 2016, p. S.9-15.'
date_created: 2021-06-15T11:09:37Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
page: S.9-15
publication: ASPE 2016 Summer Topical Meeting
status: public
title: 'Dimensional tolerances for additive manufacturing: Experimental investigation
of manufacturing accuracy for selective laser melting'
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '22410'
author:
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Volker
full_name: Schoeppner, Volker
last_name: Schoeppner
citation:
ama: 'Knoop F, Lieneke T, Schoeppner V. Reproducibility of the Dimensional Accuracy
- Investigations for FDM. In: ASPE Spring Topical Meeting. ; 2016:S.3-8.
doi:10.3139/9783446454606.004'
apa: Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the
Dimensional Accuracy - Investigations for FDM. In ASPE Spring Topical Meeting
(p. S.3-8). https://doi.org/10.3139/9783446454606.004
bibtex: '@inproceedings{Knoop_Lieneke_Schoeppner_2016, title={Reproducibility of
the Dimensional Accuracy - Investigations for FDM}, DOI={10.3139/9783446454606.004},
booktitle={ASPE Spring Topical Meeting}, author={Knoop, Frederick and Lieneke,
Tobias and Schoeppner, Volker}, year={2016}, pages={S.3-8} }'
chicago: Knoop, Frederick, Tobias Lieneke, and Volker Schoeppner. “Reproducibility
of the Dimensional Accuracy - Investigations for FDM.” In ASPE Spring Topical
Meeting, S.3-8, 2016. https://doi.org/10.3139/9783446454606.004.
ieee: F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional
Accuracy - Investigations for FDM,” in ASPE Spring Topical Meeting, 2016,
p. S.3-8.
mla: Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations
for FDM.” ASPE Spring Topical Meeting, 2016, p. S.3-8, doi:10.3139/9783446454606.004.
short: 'F. Knoop, T. Lieneke, V. Schoeppner, in: ASPE Spring Topical Meeting, 2016,
p. S.3-8.'
date_created: 2021-06-15T11:09:39Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
doi: 10.3139/9783446454606.004
language:
- iso: eng
page: S.3-8
publication: ASPE Spring Topical Meeting
status: public
title: Reproducibility of the Dimensional Accuracy - Investigations for FDM
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '22411'
author:
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Volker
full_name: Schoeppner, Volker
last_name: Schoeppner
citation:
ama: 'Knoop F, Lieneke T, Schoeppner V. Reproducibility of the Dimensional Accuracy
- Investigations for FDM. In: Summer Topical Meeting 2016. ; 2016.'
apa: Knoop, F., Lieneke, T., & Schoeppner, V. (2016). Reproducibility of the
Dimensional Accuracy - Investigations for FDM. In Summer Topical Meeting 2016.
bibtex: '@inproceedings{Knoop_Lieneke_Schoeppner_2016, title={Reproducibility of
the Dimensional Accuracy - Investigations for FDM}, booktitle={Summer Topical
Meeting 2016}, author={Knoop, Frederick and Lieneke, Tobias and Schoeppner, Volker},
year={2016} }'
chicago: Knoop, Frederick, Tobias Lieneke, and Volker Schoeppner. “Reproducibility
of the Dimensional Accuracy - Investigations for FDM.” In Summer Topical Meeting
2016, 2016.
ieee: F. Knoop, T. Lieneke, and V. Schoeppner, “Reproducibility of the Dimensional
Accuracy - Investigations for FDM,” in Summer Topical Meeting 2016, 2016.
mla: Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations
for FDM.” Summer Topical Meeting 2016, 2016.
short: 'F. Knoop, T. Lieneke, V. Schoeppner, in: Summer Topical Meeting 2016, 2016.'
date_created: 2021-06-15T11:09:40Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
language:
- iso: eng
publication: Summer Topical Meeting 2016
status: public
title: Reproducibility of the Dimensional Accuracy - Investigations for FDM
type: conference
user_id: '38077'
year: '2016'
...
---
_id: '22412'
abstract:
- lang: eng
text: Additive manufacturing creates parts in layers without using formative tools.
Compared to established manufacturing processes, additive manufacturing offers
many advantages. However, only a few research institutions and technology-leading
companies use additive manufacturing for end-use part production because relevant
challenges have not been sufficiently researched yet. Missing restrictions become
apparent in the available geometrical accuracy. The objective of this investigation
was the experimental determination of dimensional tolerances using standard parameters.
To this end, a methodical procedure was set up. Based on experimentally determined
deviations, dimensional tolerances were derived.
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Vera
full_name: Denzer, Vera
last_name: Denzer
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Denzer V, Adam G, Zimmer D. Dimensional tolerances for additive
manufacturing: Experimental investigation for Fused Deposition Modeling. In: CAT
2016. Vol 43. ; 2016:286-291. doi:10.1016/j.procir.2016.02.361'
apa: 'Lieneke, T., Denzer, V., Adam, G., & Zimmer, D. (2016). Dimensional tolerances
for additive manufacturing: Experimental investigation for Fused Deposition Modeling.
In CAT 2016 (Vol. 43, pp. 286–291). https://doi.org/10.1016/j.procir.2016.02.361'
bibtex: '@inproceedings{Lieneke_Denzer_Adam_Zimmer_2016, title={Dimensional tolerances
for additive manufacturing: Experimental investigation for Fused Deposition Modeling},
volume={43}, DOI={10.1016/j.procir.2016.02.361},
booktitle={CAT 2016}, author={Lieneke, Tobias and Denzer, Vera and Adam, Guido
and Zimmer, Detmar}, year={2016}, pages={286–291} }'
chicago: 'Lieneke, Tobias, Vera Denzer, Guido Adam, and Detmar Zimmer. “Dimensional
Tolerances for Additive Manufacturing: Experimental Investigation for Fused Deposition
Modeling.” In CAT 2016, 43:286–91, 2016. https://doi.org/10.1016/j.procir.2016.02.361.'
ieee: 'T. Lieneke, V. Denzer, G. Adam, and D. Zimmer, “Dimensional tolerances for
additive manufacturing: Experimental investigation for Fused Deposition Modeling,”
in CAT 2016, 2016, vol. 43, pp. 286–291.'
mla: 'Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing:
Experimental Investigation for Fused Deposition Modeling.” CAT 2016, vol.
43, 2016, pp. 286–91, doi:10.1016/j.procir.2016.02.361.'
short: 'T. Lieneke, V. Denzer, G. Adam, D. Zimmer, in: CAT 2016, 2016, pp. 286–291.'
date_created: 2021-06-15T11:09:41Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1016/j.procir.2016.02.361
intvolume: ' 43'
language:
- iso: eng
page: 286-291
publication: CAT 2016
status: public
title: 'Dimensional tolerances for additive manufacturing: Experimental investigation
for Fused Deposition Modeling'
type: conference
user_id: '38077'
volume: 43
year: '2016'
...
---
_id: '23027'
author:
- first_name: Jens
full_name: Holtkötter, Jens
last_name: Holtkötter
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Felix
full_name: Oestersötebier, Felix
last_name: Oestersötebier
- first_name: Sebastian
full_name: Wessels, Sebastian
last_name: Wessels
citation:
ama: 'Holtkötter J, Michael J, Henke C, Trächtler A, Oestersötebier F, Wessels S.
PROFINET-Implementierung im Rahmen der Entwicklung eines intelligenten, selbstlernenden
Teigkneters. In: Virtuelle Instrumente in Der Praxis 2016. VDE Verlag;
2016.'
apa: Holtkötter, J., Michael, J., Henke, C., Trächtler, A., Oestersötebier, F.,
& Wessels, S. (2016). PROFINET-Implementierung im Rahmen der Entwicklung eines
intelligenten, selbstlernenden Teigkneters. In Virtuelle Instrumente in der
Praxis 2016. VDE Verlag.
bibtex: '@inproceedings{Holtkötter_Michael_Henke_Trächtler_Oestersötebier_Wessels_2016,
title={PROFINET-Implementierung im Rahmen der Entwicklung eines intelligenten,
selbstlernenden Teigkneters}, booktitle={Virtuelle Instrumente in der Praxis 2016},
publisher={VDE Verlag}, author={Holtkötter, Jens and Michael, Jan and Henke, Christian
and Trächtler, Ansgar and Oestersötebier, Felix and Wessels, Sebastian}, year={2016}
}'
chicago: Holtkötter, Jens, Jan Michael, Christian Henke, Ansgar Trächtler, Felix
Oestersötebier, and Sebastian Wessels. “PROFINET-Implementierung Im Rahmen Der
Entwicklung Eines Intelligenten, Selbstlernenden Teigkneters.” In Virtuelle
Instrumente in Der Praxis 2016. VDE Verlag, 2016.
ieee: J. Holtkötter, J. Michael, C. Henke, A. Trächtler, F. Oestersötebier, and
S. Wessels, “PROFINET-Implementierung im Rahmen der Entwicklung eines intelligenten,
selbstlernenden Teigkneters,” in Virtuelle Instrumente in der Praxis 2016,
2016.
mla: Holtkötter, Jens, et al. “PROFINET-Implementierung Im Rahmen Der Entwicklung
Eines Intelligenten, Selbstlernenden Teigkneters.” Virtuelle Instrumente in
Der Praxis 2016, VDE Verlag, 2016.
short: 'J. Holtkötter, J. Michael, C. Henke, A. Trächtler, F. Oestersötebier, S.
Wessels, in: Virtuelle Instrumente in Der Praxis 2016, VDE Verlag, 2016.'
date_created: 2021-08-09T06:34:10Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: Virtuelle Instrumente in der Praxis 2016
publisher: VDE Verlag
status: public
title: PROFINET-Implementierung im Rahmen der Entwicklung eines intelligenten, selbstlernenden
Teigkneters
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23028'
author:
- first_name: Fabian
full_name: Bertelsmeier, Fabian
last_name: Bertelsmeier
- first_name: Jan
full_name: Pollmann, Jan
last_name: Pollmann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bertelsmeier F, Pollmann J, Trächtler A. A HRRN based scheduling for FMS and
RMS with networked control and product-intelligence. In: Inproceedings of the
IEEE IECON 2016. Florence, Italy: IEEE; 2016.'
apa: 'Bertelsmeier, F., Pollmann, J., & Trächtler, A. (2016). A HRRN based scheduling
for FMS and RMS with networked control and product-intelligence. In Inproceedings
of the IEEE IECON 2016. Florence, Italy: IEEE.'
bibtex: '@inproceedings{Bertelsmeier_Pollmann_Trächtler_2016, place={Florence, Italy},
title={A HRRN based scheduling for FMS and RMS with networked control and product-intelligence},
booktitle={Inproceedings of the IEEE IECON 2016}, publisher={IEEE}, author={Bertelsmeier,
Fabian and Pollmann, Jan and Trächtler, Ansgar}, year={2016} }'
chicago: 'Bertelsmeier, Fabian, Jan Pollmann, and Ansgar Trächtler. “A HRRN Based
Scheduling for FMS and RMS with Networked Control and Product-Intelligence.” In
Inproceedings of the IEEE IECON 2016. Florence, Italy: IEEE, 2016.'
ieee: F. Bertelsmeier, J. Pollmann, and A. Trächtler, “A HRRN based scheduling for
FMS and RMS with networked control and product-intelligence,” in Inproceedings
of the IEEE IECON 2016, 2016.
mla: Bertelsmeier, Fabian, et al. “A HRRN Based Scheduling for FMS and RMS with
Networked Control and Product-Intelligence.” Inproceedings of the IEEE IECON
2016, IEEE, 2016.
short: 'F. Bertelsmeier, J. Pollmann, A. Trächtler, in: Inproceedings of the IEEE
IECON 2016, IEEE, Florence, Italy, 2016.'
date_created: 2021-08-09T06:34:11Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
place: Florence, Italy
publication: Inproceedings of the IEEE IECON 2016
publisher: IEEE
status: public
title: A HRRN based scheduling for FMS and RMS with networked control and product-intelligence
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23029'
author:
- first_name: Arne Thorsten
full_name: Rüting, Arne Thorsten
last_name: Rüting
- first_name: Lars Martin
full_name: Blumenthal, Lars Martin
id: '27566'
last_name: Blumenthal
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rüting AT, Blumenthal LM, Trächtler A. Model Predictive Feedforward Compensation
for Control of Multi Axes Hybrid Kinematics on PLC. In: Proceedings of IEEE
IECON 2016. Florence, Italy: IEEE; 2016.'
apa: 'Rüting, A. T., Blumenthal, L. M., & Trächtler, A. (2016). Model Predictive
Feedforward Compensation for Control of Multi Axes Hybrid Kinematics on PLC. In
Proceedings of IEEE IECON 2016. Florence, Italy: IEEE.'
bibtex: '@inproceedings{Rüting_Blumenthal_Trächtler_2016, place={Florence, Italy},
title={Model Predictive Feedforward Compensation for Control of Multi Axes Hybrid
Kinematics on PLC}, booktitle={Proceedings of IEEE IECON 2016}, publisher={IEEE},
author={Rüting, Arne Thorsten and Blumenthal, Lars Martin and Trächtler, Ansgar},
year={2016} }'
chicago: 'Rüting, Arne Thorsten, Lars Martin Blumenthal, and Ansgar Trächtler. “Model
Predictive Feedforward Compensation for Control of Multi Axes Hybrid Kinematics
on PLC.” In Proceedings of IEEE IECON 2016. Florence, Italy: IEEE, 2016.'
ieee: A. T. Rüting, L. M. Blumenthal, and A. Trächtler, “Model Predictive Feedforward
Compensation for Control of Multi Axes Hybrid Kinematics on PLC,” in Proceedings
of IEEE IECON 2016, 2016.
mla: Rüting, Arne Thorsten, et al. “Model Predictive Feedforward Compensation for
Control of Multi Axes Hybrid Kinematics on PLC.” Proceedings of IEEE IECON
2016, IEEE, 2016.
short: 'A.T. Rüting, L.M. Blumenthal, A. Trächtler, in: Proceedings of IEEE IECON
2016, IEEE, Florence, Italy, 2016.'
date_created: 2021-08-09T06:34:12Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
place: Florence, Italy
publication: Proceedings of IEEE IECON 2016
publisher: IEEE
status: public
title: Model Predictive Feedforward Compensation for Control of Multi Axes Hybrid
Kinematics on PLC
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23033'
author:
- first_name: Sebastian
full_name: Peitz, Sebastian
last_name: Peitz
- first_name: Manuel
full_name: Graeler, Manuel
last_name: Graeler
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Mirko
full_name: Hessel-von Molo, Mirko
last_name: Hessel-von Molo
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Peitz S, Graeler M, Henke C, Hessel-von Molo M, Dellnitz M, Trächtler A. Multiobjective
Model Predictive Control of an Industrial Laundry. 3rd International Conference
on System-integrated Intelligence: New Challenges for Product and Production Engineering.
2016;Procedia Technology 26:483 – 490.'
apa: 'Peitz, S., Graeler, M., Henke, C., Hessel-von Molo, M., Dellnitz, M., &
Trächtler, A. (2016). Multiobjective Model Predictive Control of an Industrial
Laundry. 3rd International Conference on System-Integrated Intelligence: New
Challenges for Product and Production Engineering, Procedia Technology
26, 483 – 490.'
bibtex: '@article{Peitz_Graeler_Henke_Hessel-von Molo_Dellnitz_Trächtler_2016, title={Multiobjective
Model Predictive Control of an Industrial Laundry}, volume={Procedia Technology
26}, journal={3rd International Conference on System-integrated Intelligence:
New Challenges for Product and Production Engineering}, author={Peitz, Sebastian
and Graeler, Manuel and Henke, Christian and Hessel-von Molo, Mirko and Dellnitz,
Michael and Trächtler, Ansgar}, year={2016}, pages={483 – 490} }'
chicago: 'Peitz, Sebastian, Manuel Graeler, Christian Henke, Mirko Hessel-von Molo,
Michael Dellnitz, and Ansgar Trächtler. “Multiobjective Model Predictive Control
of an Industrial Laundry.” 3rd International Conference on System-Integrated
Intelligence: New Challenges for Product and Production Engineering Procedia
Technology 26 (2016): 483 – 490.'
ieee: 'S. Peitz, M. Graeler, C. Henke, M. Hessel-von Molo, M. Dellnitz, and A. Trächtler,
“Multiobjective Model Predictive Control of an Industrial Laundry,” 3rd International
Conference on System-integrated Intelligence: New Challenges for Product and Production
Engineering, vol. Procedia Technology 26, pp. 483 – 490, 2016.'
mla: 'Peitz, Sebastian, et al. “Multiobjective Model Predictive Control of an Industrial
Laundry.” 3rd International Conference on System-Integrated Intelligence: New
Challenges for Product and Production Engineering, vol. Procedia Technology
26, 2016, pp. 483 – 490.'
short: 'S. Peitz, M. Graeler, C. Henke, M. Hessel-von Molo, M. Dellnitz, A. Trächtler,
3rd International Conference on System-Integrated Intelligence: New Challenges
for Product and Production Engineering Procedia Technology 26 (2016) 483 – 490.'
date_created: 2021-08-09T06:34:17Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 483 – 490
publication: '3rd International Conference on System-integrated Intelligence: New
Challenges for Product and Production Engineering'
status: public
title: Multiobjective Model Predictive Control of an Industrial Laundry
type: journal_article
user_id: '24876'
volume: 'Procedia Technology 26 '
year: '2016'
...
---
_id: '23040'
author:
- first_name: Fabian
full_name: Bertelsmeier, Fabian
last_name: Bertelsmeier
- first_name: Stefan
full_name: Schöne, Stefan
last_name: Schöne
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bertelsmeier F, Schöne S, Trächtler A. Development and design of intelligent
product carriers for flexible networked control of distributed manufacturing processes.
In: Inproceedings of the IEEE 24th Mediterranean Confernce on Control and Automation
(MED). Athens, Greece: IEEE; 2016.'
apa: 'Bertelsmeier, F., Schöne, S., & Trächtler, A. (2016). Development and
design of intelligent product carriers for flexible networked control of distributed
manufacturing processes. In Inproceedings of the IEEE 24th Mediterranean Confernce
on Control and Automation (MED). Athens, Greece: IEEE.'
bibtex: '@inproceedings{Bertelsmeier_Schöne_Trächtler_2016, place={Athens, Greece},
title={Development and design of intelligent product carriers for flexible networked
control of distributed manufacturing processes}, booktitle={Inproceedings of the
IEEE 24th Mediterranean Confernce on Control and Automation (MED)}, publisher={IEEE},
author={Bertelsmeier, Fabian and Schöne, Stefan and Trächtler, Ansgar}, year={2016}
}'
chicago: 'Bertelsmeier, Fabian, Stefan Schöne, and Ansgar Trächtler. “Development
and Design of Intelligent Product Carriers for FLexible Networked Control of Distributed
Manufacturing Processes.” In Inproceedings of the IEEE 24th Mediterranean Confernce
on Control and Automation (MED). Athens, Greece: IEEE, 2016.'
ieee: F. Bertelsmeier, S. Schöne, and A. Trächtler, “Development and design of intelligent
product carriers for flexible networked control of distributed manufacturing processes,”
in Inproceedings of the IEEE 24th Mediterranean Confernce on Control and Automation
(MED), 2016.
mla: Bertelsmeier, Fabian, et al. “Development and Design of Intelligent Product
Carriers for FLexible Networked Control of Distributed Manufacturing Processes.”
Inproceedings of the IEEE 24th Mediterranean Confernce on Control and Automation
(MED), IEEE, 2016.
short: 'F. Bertelsmeier, S. Schöne, A. Trächtler, in: Inproceedings of the IEEE
24th Mediterranean Confernce on Control and Automation (MED), IEEE, Athens, Greece,
2016.'
date_created: 2021-08-09T06:34:25Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
place: Athens, Greece
publication: Inproceedings of the IEEE 24th Mediterranean Confernce on Control and
Automation (MED)
publisher: IEEE
status: public
title: Development and design of intelligent product carriers for flexible networked
control of distributed manufacturing processes
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23043'
author:
- first_name: Volker
full_name: Geneiß, Volker
last_name: Geneiß
- first_name: Christian
full_name: Hedayat, Christian
last_name: Hedayat
- first_name: Fabian
full_name: Bertelsmeier, Fabian
last_name: Bertelsmeier
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Karl-Ernst
full_name: Vathauer, Karl-Ernst
last_name: Vathauer
- first_name: Thomas
full_name: Geßner, Thomas
last_name: Geßner
citation:
ama: 'Geneiß V, Hedayat C, Bertelsmeier F, Henke C, Vathauer K-E, Geßner T. Product
Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing and
Intralogistic Processes. In: Inproceedings of Smart Systems Integration 2016
International Conference and Exhibition on Integration of Materials, Devices and
Systems. ; 2016.'
apa: Geneiß, V., Hedayat, C., Bertelsmeier, F., Henke, C., Vathauer, K.-E., &
Geßner, T. (2016). Product Data and Sensor-based Intelligent Drive Control for
Flexible Manufacturing and Intralogistic Processes. In Inproceedings of Smart
Systems Integration 2016 International Conference and Exhibition on integration
of materials, devices and systems.
bibtex: '@inproceedings{Geneiß_Hedayat_Bertelsmeier_Henke_Vathauer_Geßner_2016,
title={Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing
and Intralogistic Processes}, booktitle={Inproceedings of Smart Systems Integration
2016 International Conference and Exhibition on integration of materials, devices
and systems}, author={Geneiß, Volker and Hedayat, Christian and Bertelsmeier,
Fabian and Henke, Christian and Vathauer, Karl-Ernst and Geßner, Thomas}, year={2016}
}'
chicago: Geneiß, Volker, Christian Hedayat, Fabian Bertelsmeier, Christian Henke,
Karl-Ernst Vathauer, and Thomas Geßner. “Product Data and Sensor-Based Intelligent
Drive Control for Flexible Manufacturing and Intralogistic Processes.” In Inproceedings
of Smart Systems Integration 2016 International Conference and Exhibition on Integration
of Materials, Devices and Systems, 2016.
ieee: V. Geneiß, C. Hedayat, F. Bertelsmeier, C. Henke, K.-E. Vathauer, and T. Geßner,
“Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing
and Intralogistic Processes,” in Inproceedings of Smart Systems Integration
2016 International Conference and Exhibition on integration of materials, devices
and systems, 2016.
mla: Geneiß, Volker, et al. “Product Data and Sensor-Based Intelligent Drive Control
for Flexible Manufacturing and Intralogistic Processes.” Inproceedings of Smart
Systems Integration 2016 International Conference and Exhibition on Integration
of Materials, Devices and Systems, 2016.
short: 'V. Geneiß, C. Hedayat, F. Bertelsmeier, C. Henke, K.-E. Vathauer, T. Geßner,
in: Inproceedings of Smart Systems Integration 2016 International Conference and
Exhibition on Integration of Materials, Devices and Systems, 2016.'
date_created: 2021-08-09T06:34:28Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '241'
language:
- iso: eng
publication: Inproceedings of Smart Systems Integration 2016 International Conference
and Exhibition on integration of materials, devices and systems
status: public
title: Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing
and Intralogistic Processes
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23044'
author:
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Jens
full_name: Holtkötter, Jens
last_name: Holtkötter
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Michael J, Holtkötter J, Henke C, Trächtler A. Modellbildung und Simulation
im Kontext des Systems Engineering. In: ASIM-Treffen STS/GMMS 2016. ; 2016:174-179.'
apa: Michael, J., Holtkötter, J., Henke, C., & Trächtler, A. (2016). Modellbildung
und Simulation im Kontext des Systems Engineering. In ASIM-Treffen STS/GMMS
2016 (pp. 174–179).
bibtex: '@inproceedings{Michael_Holtkötter_Henke_Trächtler_2016, title={Modellbildung
und Simulation im Kontext des Systems Engineering}, booktitle={ASIM-Treffen STS/GMMS
2016}, author={Michael, Jan and Holtkötter, Jens and Henke, Christian and Trächtler,
Ansgar}, year={2016}, pages={174–179} }'
chicago: Michael, Jan, Jens Holtkötter, Christian Henke, and Ansgar Trächtler. “Modellbildung
Und Simulation Im Kontext Des Systems Engineering.” In ASIM-Treffen STS/GMMS
2016, 174–79, 2016.
ieee: J. Michael, J. Holtkötter, C. Henke, and A. Trächtler, “Modellbildung und
Simulation im Kontext des Systems Engineering,” in ASIM-Treffen STS/GMMS 2016,
2016, pp. 174–179.
mla: Michael, Jan, et al. “Modellbildung Und Simulation Im Kontext Des Systems Engineering.”
ASIM-Treffen STS/GMMS 2016, 2016, pp. 174–79.
short: 'J. Michael, J. Holtkötter, C. Henke, A. Trächtler, in: ASIM-Treffen STS/GMMS
2016, 2016, pp. 174–179.'
date_created: 2021-08-09T06:34:30Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 174-179
publication: ASIM-Treffen STS/GMMS 2016
status: public
title: Modellbildung und Simulation im Kontext des Systems Engineering
type: conference
user_id: '24876'
year: '2016'
...