---
_id: '1782'
author:
- first_name: Tobias
full_name: Graf, Tobias
last_name: Graf
- first_name: Lars
full_name: Schaefers, Lars
last_name: Schaefers
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
citation:
ama: 'Graf T, Schaefers L, Platzner M. On Semeai Detection in Monte-Carlo Go. In:
Proc. Conf. on Computers and Games (CG). Lecture Notes in Computer Science.
Switzerland: Springer; 2014:14-25. doi:10.1007/978-3-319-09165-5_2'
apa: 'Graf, T., Schaefers, L., & Platzner, M. (2014). On Semeai Detection in
Monte-Carlo Go. In Proc. Conf. on Computers and Games (CG) (pp. 14–25).
Switzerland: Springer. https://doi.org/10.1007/978-3-319-09165-5_2'
bibtex: '@inproceedings{Graf_Schaefers_Platzner_2014, place={Switzerland}, series={Lecture
Notes in Computer Science}, title={On Semeai Detection in Monte-Carlo Go}, DOI={10.1007/978-3-319-09165-5_2},
number={8427}, booktitle={Proc. Conf. on Computers and Games (CG)}, publisher={Springer},
author={Graf, Tobias and Schaefers, Lars and Platzner, Marco}, year={2014}, pages={14–25},
collection={Lecture Notes in Computer Science} }'
chicago: 'Graf, Tobias, Lars Schaefers, and Marco Platzner. “On Semeai Detection
in Monte-Carlo Go.” In Proc. Conf. on Computers and Games (CG), 14–25.
Lecture Notes in Computer Science. Switzerland: Springer, 2014. https://doi.org/10.1007/978-3-319-09165-5_2.'
ieee: T. Graf, L. Schaefers, and M. Platzner, “On Semeai Detection in Monte-Carlo
Go,” in Proc. Conf. on Computers and Games (CG), 2014, no. 8427, pp. 14–25.
mla: Graf, Tobias, et al. “On Semeai Detection in Monte-Carlo Go.” Proc. Conf.
on Computers and Games (CG), no. 8427, Springer, 2014, pp. 14–25, doi:10.1007/978-3-319-09165-5_2.
short: 'T. Graf, L. Schaefers, M. Platzner, in: Proc. Conf. on Computers and Games
(CG), Springer, Switzerland, 2014, pp. 14–25.'
date_created: 2018-03-26T13:50:37Z
date_updated: 2022-01-06T06:53:20Z
department:
- _id: '27'
- _id: '78'
doi: 10.1007/978-3-319-09165-5_2
issue: '8427'
page: 14-25
place: Switzerland
publication: Proc. Conf. on Computers and Games (CG)
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: On Semeai Detection in Monte-Carlo Go
type: conference
user_id: '24135'
year: '2014'
...
---
_id: '20903'
author:
- first_name: Claudia
full_name: Priesterjahn, Claudia
last_name: Priesterjahn
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
citation:
ama: 'Priesterjahn C, Holtmann J, Meyer M. Smarte Entwicklung fuer smarte Systeme:
Softwareentwicklung im Kontext des Gesamtsystems. In: Tagungsband Embedded
Software Engineering Kongress 2014. ; 2014:619-627.'
apa: 'Priesterjahn, C., Holtmann, J., & Meyer, M. (2014). Smarte Entwicklung
fuer smarte Systeme: Softwareentwicklung im Kontext des Gesamtsystems. In Tagungsband
Embedded Software Engineering Kongress 2014 (pp. 619–627).'
bibtex: '@inproceedings{Priesterjahn_Holtmann_Meyer_2014, title={Smarte Entwicklung
fuer smarte Systeme: Softwareentwicklung im Kontext des Gesamtsystems}, booktitle={Tagungsband
Embedded Software Engineering Kongress 2014}, author={Priesterjahn, Claudia and
Holtmann, Jörg and Meyer, Matthias}, year={2014}, pages={619–627} }'
chicago: 'Priesterjahn, Claudia, Jörg Holtmann, and Matthias Meyer. “Smarte Entwicklung
Fuer Smarte Systeme: Softwareentwicklung Im Kontext Des Gesamtsystems.” In Tagungsband
Embedded Software Engineering Kongress 2014, 619–27, 2014.'
ieee: 'C. Priesterjahn, J. Holtmann, and M. Meyer, “Smarte Entwicklung fuer smarte
Systeme: Softwareentwicklung im Kontext des Gesamtsystems,” in Tagungsband
Embedded Software Engineering Kongress 2014, 2014, pp. 619–627.'
mla: 'Priesterjahn, Claudia, et al. “Smarte Entwicklung Fuer Smarte Systeme: Softwareentwicklung
Im Kontext Des Gesamtsystems.” Tagungsband Embedded Software Engineering Kongress
2014, 2014, pp. 619–27.'
short: 'C. Priesterjahn, J. Holtmann, M. Meyer, in: Tagungsband Embedded Software
Engineering Kongress 2014, 2014, pp. 619–627.'
date_created: 2021-01-12T14:01:32Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '241'
language:
- iso: eng
page: 619-627
publication: Tagungsband Embedded Software Engineering Kongress 2014
status: public
title: 'Smarte Entwicklung fuer smarte Systeme: Softwareentwicklung im Kontext des
Gesamtsystems'
type: conference
user_id: '15249'
year: '2014'
...
---
_id: '20904'
author:
- first_name: Christian
full_name: Diedrich, Christian
last_name: Diedrich
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: Lars
full_name: Evertz, Lars
last_name: Evertz
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
citation:
ama: Diedrich C, Meyer M, Evertz L, Schäfer W. Dienste in der Automatisierungstechnik.
atp edition - Automatisierungstechnische Praxis. 2014:24-35.
apa: Diedrich, C., Meyer, M., Evertz, L., & Schäfer, W. (2014). Dienste in der
Automatisierungstechnik. Atp Edition - Automatisierungstechnische Praxis,
24–35.
bibtex: '@article{Diedrich_Meyer_Evertz_Schäfer_2014, title={Dienste in der Automatisierungstechnik},
journal={atp edition - Automatisierungstechnische Praxis}, author={Diedrich, Christian
and Meyer, Matthias and Evertz, Lars and Schäfer, Wilhelm}, year={2014}, pages={24–35}
}'
chicago: Diedrich, Christian, Matthias Meyer, Lars Evertz, and Wilhelm Schäfer.
“Dienste in Der Automatisierungstechnik.” Atp Edition - Automatisierungstechnische
Praxis, 2014, 24–35.
ieee: C. Diedrich, M. Meyer, L. Evertz, and W. Schäfer, “Dienste in der Automatisierungstechnik,”
atp edition - Automatisierungstechnische Praxis, pp. 24–35, 2014.
mla: Diedrich, Christian, et al. “Dienste in Der Automatisierungstechnik.” Atp
Edition - Automatisierungstechnische Praxis, 2014, pp. 24–35.
short: C. Diedrich, M. Meyer, L. Evertz, W. Schäfer, Atp Edition - Automatisierungstechnische
Praxis (2014) 24–35.
date_created: 2021-01-12T14:02:59Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '241'
language:
- iso: eng
page: 24-35
publication: atp edition - Automatisierungstechnische Praxis
status: public
title: Dienste in der Automatisierungstechnik
type: journal_article
user_id: '15249'
year: '2014'
...
---
_id: '20905'
author:
- first_name: Uwe
full_name: Pohlmann, Uwe
last_name: Pohlmann
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: Christopher
full_name: Gerking, Christopher
last_name: Gerking
citation:
ama: 'Pohlmann U, Holtmann J, Meyer M, Gerking C. Generating Modelica Models from
Software Specifications for the Simulation of Cyber-physical Systems. In: Proceedings
of the 40th Euromicro Conference on Software Engineering and Advanced Applications
(SEAA). IEEE Xplore; 2014.'
apa: Pohlmann, U., Holtmann, J., Meyer, M., & Gerking, C. (2014). Generating
Modelica Models from Software Specifications for the Simulation of Cyber-physical
Systems. Proceedings of the 40th Euromicro Conference on Software Engineering
and Advanced Applications (SEAA).
bibtex: '@inproceedings{Pohlmann_Holtmann_Meyer_Gerking_2014, title={Generating
Modelica Models from Software Specifications for the Simulation of Cyber-physical
Systems}, booktitle={Proceedings of the 40th Euromicro Conference on Software
Engineering and Advanced Applications (SEAA)}, publisher={IEEE Xplore}, author={Pohlmann,
Uwe and Holtmann, Jörg and Meyer, Matthias and Gerking, Christopher}, year={2014}
}'
chicago: Pohlmann, Uwe, Jörg Holtmann, Matthias Meyer, and Christopher Gerking.
“Generating Modelica Models from Software Specifications for the Simulation of
Cyber-Physical Systems.” In Proceedings of the 40th Euromicro Conference on
Software Engineering and Advanced Applications (SEAA). IEEE Xplore, 2014.
ieee: U. Pohlmann, J. Holtmann, M. Meyer, and C. Gerking, “Generating Modelica Models
from Software Specifications for the Simulation of Cyber-physical Systems,” 2014.
mla: Pohlmann, Uwe, et al. “Generating Modelica Models from Software Specifications
for the Simulation of Cyber-Physical Systems.” Proceedings of the 40th Euromicro
Conference on Software Engineering and Advanced Applications (SEAA), IEEE
Xplore, 2014.
short: 'U. Pohlmann, J. Holtmann, M. Meyer, C. Gerking, in: Proceedings of the 40th
Euromicro Conference on Software Engineering and Advanced Applications (SEAA),
IEEE Xplore, 2014.'
date_created: 2021-01-12T14:03:55Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '76'
- _id: '241'
language:
- iso: eng
publication: Proceedings of the 40th Euromicro Conference on Software Engineering
and Advanced Applications (SEAA)
publisher: IEEE Xplore
status: public
title: Generating Modelica Models from Software Specifications for the Simulation
of Cyber-physical Systems
type: conference
user_id: '5786'
year: '2014'
...
---
_id: '20906'
abstract:
- lang: ger
text: 'Von heutigen technischen Systemen wird immer mehr Funktionalität gefordert.
Dies manifestiert sich in einer steigenden Anzahl von Anforderungen, die üblicherweise
in freier natürlicher Sprache festgehalten werden. Das führt oft zu mehrdeutigen,
widersprüchlichen oder unvollständigen Anforderungen. In diesem Beitrag wird eine
Methode zur Spezifikation von Anforderungen auf Basis von Satzmustern inklusive
ihrer Werkzeugunterstützung „ReqPat“ vorgestellt: Anforderungen werden weiterhin
textuell aber in einer eingeschränkten natürlichen Sprache verfasst. Dadurch wird
ein einheitliches Anforderungsverständnis erreicht und es werden Qualitätsanalysen
sowie der Übergang zu Modellen automatisiert.'
author:
- first_name: Markus
full_name: Fockel, Markus
id: '8472'
last_name: Fockel
orcid: 0000-0002-1269-0702
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
citation:
ama: Fockel M, Holtmann J, Meyer M. Mit Satzmustern hochwertige Anforderungsdokumente
effizient erstellen. OBJEKTspektrum. 2014;(RE/2014).
apa: Fockel, M., Holtmann, J., & Meyer, M. (2014). Mit Satzmustern hochwertige
Anforderungsdokumente effizient erstellen. OBJEKTspektrum, (RE/2014).
bibtex: '@article{Fockel_Holtmann_Meyer_2014, title={Mit Satzmustern hochwertige
Anforderungsdokumente effizient erstellen}, number={RE/2014}, journal={OBJEKTspektrum},
author={Fockel, Markus and Holtmann, Jörg and Meyer, Matthias}, year={2014} }'
chicago: Fockel, Markus, Jörg Holtmann, and Matthias Meyer. “Mit Satzmustern Hochwertige
Anforderungsdokumente Effizient Erstellen.” OBJEKTspektrum, no. RE/2014
(2014).
ieee: M. Fockel, J. Holtmann, and M. Meyer, “Mit Satzmustern hochwertige Anforderungsdokumente
effizient erstellen,” OBJEKTspektrum, no. RE/2014, 2014.
mla: Fockel, Markus, et al. “Mit Satzmustern Hochwertige Anforderungsdokumente Effizient
Erstellen.” OBJEKTspektrum, no. RE/2014, 2014.
short: M. Fockel, J. Holtmann, M. Meyer, OBJEKTspektrum (2014).
date_created: 2021-01-12T14:05:27Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '241'
- _id: '662'
issue: RE/2014
language:
- iso: eng
publication: OBJEKTspektrum
status: public
title: Mit Satzmustern hochwertige Anforderungsdokumente effizient erstellen
type: journal_article
user_id: '8472'
year: '2014'
...
---
_id: '20907'
author:
- first_name: Steffen
full_name: Becker, Steffen
last_name: Becker
- first_name: Stefan
full_name: Dziwok, Stefan
id: '3901'
last_name: Dziwok
orcid: http://orcid.org/0000-0002-8679-6673
- first_name: Christopher
full_name: Gerking, Christopher
last_name: Gerking
- first_name: Christian
full_name: Heinzemann, Christian
last_name: Heinzemann
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: Uwe
full_name: Pohlmann, Uwe
last_name: Pohlmann
citation:
ama: 'Becker S, Dziwok S, Gerking C, et al. The MechatronicUML Method: Model-Driven
Software Engineering of Self-Adaptive Mechatronic Systems. In: Proceedings
of the 36th International Conference on Software Engineering (Posters). ACM,
New York, NY, USA; 2014.'
apa: 'Becker, S., Dziwok, S., Gerking, C., Heinzemann, C., Schäfer, W., Meyer, M.,
& Pohlmann, U. (2014). The MechatronicUML Method: Model-Driven Software Engineering
of Self-Adaptive Mechatronic Systems. Proceedings of the 36th International
Conference on Software Engineering (Posters).'
bibtex: '@inproceedings{Becker_Dziwok_Gerking_Heinzemann_Schäfer_Meyer_Pohlmann_2014,
title={The MechatronicUML Method: Model-Driven Software Engineering of Self-Adaptive
Mechatronic Systems}, booktitle={Proceedings of the 36th International Conference
on Software Engineering (Posters)}, publisher={ACM, New York, NY, USA}, author={Becker,
Steffen and Dziwok, Stefan and Gerking, Christopher and Heinzemann, Christian
and Schäfer, Wilhelm and Meyer, Matthias and Pohlmann, Uwe}, year={2014} }'
chicago: 'Becker, Steffen, Stefan Dziwok, Christopher Gerking, Christian Heinzemann,
Wilhelm Schäfer, Matthias Meyer, and Uwe Pohlmann. “The MechatronicUML Method:
Model-Driven Software Engineering of Self-Adaptive Mechatronic Systems.” In Proceedings
of the 36th International Conference on Software Engineering (Posters). ACM,
New York, NY, USA, 2014.'
ieee: 'S. Becker et al., “The MechatronicUML Method: Model-Driven Software
Engineering of Self-Adaptive Mechatronic Systems,” 2014.'
mla: 'Becker, Steffen, et al. “The MechatronicUML Method: Model-Driven Software
Engineering of Self-Adaptive Mechatronic Systems.” Proceedings of the 36th
International Conference on Software Engineering (Posters), ACM, New York,
NY, USA, 2014.'
short: 'S. Becker, S. Dziwok, C. Gerking, C. Heinzemann, W. Schäfer, M. Meyer, U.
Pohlmann, in: Proceedings of the 36th International Conference on Software Engineering
(Posters), ACM, New York, NY, USA, 2014.'
date_created: 2021-01-12T14:06:40Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '76'
- _id: '241'
language:
- iso: eng
publication: Proceedings of the 36th International Conference on Software Engineering
(Posters)
publisher: ACM, New York, NY, USA
status: public
title: 'The MechatronicUML Method: Model-Driven Software Engineering of Self-Adaptive
Mechatronic Systems'
type: conference
user_id: '5786'
year: '2014'
...
---
_id: '20908'
author:
- first_name: Uwe
full_name: Pohlmann, Uwe
last_name: Pohlmann
- first_name: Stefan
full_name: Dziwok, Stefan
id: '3901'
last_name: Dziwok
orcid: http://orcid.org/0000-0002-8679-6673
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: Matthias
full_name: Tichy, Matthias
last_name: Tichy
- first_name: Sebastian
full_name: Thiele, Sebastian
last_name: Thiele
citation:
ama: 'Pohlmann U, Dziwok S, Meyer M, Tichy M, Thiele S. A Modelica Coordination
Pattern Library for Cyber-Physical Systems. In: Proceedings of the 7th International
ICST Conference on Simulation Tools and Techniques. ; 2014.'
apa: Pohlmann, U., Dziwok, S., Meyer, M., Tichy, M., & Thiele, S. (2014). A
Modelica Coordination Pattern Library for Cyber-Physical Systems. Proceedings
of the 7th International ICST Conference on Simulation Tools and Techniques.
bibtex: '@inproceedings{Pohlmann_Dziwok_Meyer_Tichy_Thiele_2014, title={A Modelica
Coordination Pattern Library for Cyber-Physical Systems}, booktitle={Proceedings
of the 7th International ICST Conference on Simulation Tools and Techniques},
author={Pohlmann, Uwe and Dziwok, Stefan and Meyer, Matthias and Tichy, Matthias
and Thiele, Sebastian}, year={2014} }'
chicago: Pohlmann, Uwe, Stefan Dziwok, Matthias Meyer, Matthias Tichy, and Sebastian
Thiele. “A Modelica Coordination Pattern Library for Cyber-Physical Systems.”
In Proceedings of the 7th International ICST Conference on Simulation Tools
and Techniques, 2014.
ieee: U. Pohlmann, S. Dziwok, M. Meyer, M. Tichy, and S. Thiele, “A Modelica Coordination
Pattern Library for Cyber-Physical Systems,” 2014.
mla: Pohlmann, Uwe, et al. “A Modelica Coordination Pattern Library for Cyber-Physical
Systems.” Proceedings of the 7th International ICST Conference on Simulation
Tools and Techniques, 2014.
short: 'U. Pohlmann, S. Dziwok, M. Meyer, M. Tichy, S. Thiele, in: Proceedings of
the 7th International ICST Conference on Simulation Tools and Techniques, 2014.'
date_created: 2021-01-12T14:07:40Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '76'
- _id: '241'
language:
- iso: eng
main_file_link:
- url: http://dl.acm.org/citation.cfm?id=2643106&CFID=389201271&CFTOKEN=71445276
publication: Proceedings of the 7th International ICST Conference on Simulation Tools
and Techniques
status: public
title: A Modelica Coordination Pattern Library for Cyber-Physical Systems
type: conference
user_id: '5786'
year: '2014'
...
---
_id: '20909'
author:
- first_name: Steffen
full_name: Becker, Steffen
last_name: Becker
- first_name: Stefan
full_name: Dziwok, Stefan
id: '3901'
last_name: Dziwok
orcid: http://orcid.org/0000-0002-8679-6673
- first_name: Christopher
full_name: Gerking, Christopher
last_name: Gerking
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
- first_name: Christian
full_name: Heinzemann, Christian
last_name: Heinzemann
- first_name: Sebastian
full_name: Thiele, Sebastian
last_name: Thiele
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: Claudia
full_name: Priesterjahn, Claudia
last_name: Priesterjahn
- first_name: Uwe
full_name: Pohlmann, Uwe
last_name: Pohlmann
- first_name: Matthias
full_name: Tichy, Matthias
last_name: Tichy
citation:
ama: Becker S, Dziwok S, Gerking C, et al. The MechatronicUML Design Method -
Process and Language for Platform-Independent Modeling.; 2014.
apa: Becker, S., Dziwok, S., Gerking, C., Schäfer, W., Heinzemann, C., Thiele, S.,
Meyer, M., Priesterjahn, C., Pohlmann, U., & Tichy, M. (2014). The MechatronicUML
Design Method - Process and Language for Platform-Independent Modeling.
bibtex: '@book{Becker_Dziwok_Gerking_Schäfer_Heinzemann_Thiele_Meyer_Priesterjahn_Pohlmann_Tichy_2014,
title={The MechatronicUML Design Method - Process and Language for Platform-Independent
Modeling}, author={Becker, Steffen and Dziwok, Stefan and Gerking, Christopher
and Schäfer, Wilhelm and Heinzemann, Christian and Thiele, Sebastian and Meyer,
Matthias and Priesterjahn, Claudia and Pohlmann, Uwe and Tichy, Matthias}, year={2014}
}'
chicago: Becker, Steffen, Stefan Dziwok, Christopher Gerking, Wilhelm Schäfer, Christian
Heinzemann, Sebastian Thiele, Matthias Meyer, Claudia Priesterjahn, Uwe Pohlmann,
and Matthias Tichy. The MechatronicUML Design Method - Process and Language
for Platform-Independent Modeling, 2014.
ieee: S. Becker et al., The MechatronicUML Design Method - Process and
Language for Platform-Independent Modeling. 2014.
mla: Becker, Steffen, et al. The MechatronicUML Design Method - Process and Language
for Platform-Independent Modeling. 2014.
short: S. Becker, S. Dziwok, C. Gerking, W. Schäfer, C. Heinzemann, S. Thiele, M.
Meyer, C. Priesterjahn, U. Pohlmann, M. Tichy, The MechatronicUML Design Method
- Process and Language for Platform-Independent Modeling, 2014.
date_created: 2021-01-12T14:08:53Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '76'
- _id: '241'
language:
- iso: eng
status: public
title: The MechatronicUML Design Method - Process and Language for Platform-Independent
Modeling
type: report
user_id: '5786'
year: '2014'
...
---
_id: '20910'
author:
- first_name: Uwe
full_name: Pohlmann, Uwe
last_name: Pohlmann
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: Andreas Peter
full_name: Dann, Andreas Peter
last_name: Dann
- first_name: Christopher
full_name: Brink, Christopher
last_name: Brink
citation:
ama: 'Pohlmann U, Meyer M, Dann AP, Brink C. Viewpoints and Views in Hardware Platform
Modeling for Safe Deployment. In: Proceedings of the 2Nd Workshop on View-Based,
Aspect-Oriented and Orthographic Software Modelling. ACM, New York, NY, USA;
2014:23:23-23:30.'
apa: Pohlmann, U., Meyer, M., Dann, A. P., & Brink, C. (2014). Viewpoints and
Views in Hardware Platform Modeling for Safe Deployment. Proceedings of the
2Nd Workshop on View-Based, Aspect-Oriented and Orthographic Software Modelling,
23:23-23:30.
bibtex: '@inproceedings{Pohlmann_Meyer_Dann_Brink_2014, title={Viewpoints and Views
in Hardware Platform Modeling for Safe Deployment}, booktitle={Proceedings of
the 2Nd Workshop on View-Based, Aspect-Oriented and Orthographic Software Modelling},
publisher={ACM, New York, NY, USA}, author={Pohlmann, Uwe and Meyer, Matthias
and Dann, Andreas Peter and Brink, Christopher}, year={2014}, pages={23:23-23:30}
}'
chicago: Pohlmann, Uwe, Matthias Meyer, Andreas Peter Dann, and Christopher Brink.
“Viewpoints and Views in Hardware Platform Modeling for Safe Deployment.” In Proceedings
of the 2Nd Workshop on View-Based, Aspect-Oriented and Orthographic Software Modelling,
23:23-23:30. ACM, New York, NY, USA, 2014.
ieee: U. Pohlmann, M. Meyer, A. P. Dann, and C. Brink, “Viewpoints and Views in
Hardware Platform Modeling for Safe Deployment,” in Proceedings of the 2Nd
Workshop on View-Based, Aspect-Oriented and Orthographic Software Modelling,
2014, p. 23:23-23:30.
mla: Pohlmann, Uwe, et al. “Viewpoints and Views in Hardware Platform Modeling for
Safe Deployment.” Proceedings of the 2Nd Workshop on View-Based, Aspect-Oriented
and Orthographic Software Modelling, ACM, New York, NY, USA, 2014, p. 23:23-23:30.
short: 'U. Pohlmann, M. Meyer, A.P. Dann, C. Brink, in: Proceedings of the 2Nd Workshop
on View-Based, Aspect-Oriented and Orthographic Software Modelling, ACM, New York,
NY, USA, 2014, p. 23:23-23:30.'
date_created: 2021-01-12T14:09:51Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '76'
- _id: '241'
language:
- iso: eng
page: 23:23-23:30
publication: Proceedings of the 2Nd Workshop on View-Based, Aspect-Oriented and Orthographic
Software Modelling
publisher: ACM, New York, NY, USA
status: public
title: Viewpoints and Views in Hardware Platform Modeling for Safe Deployment
type: conference
user_id: '5786'
year: '2014'
...
---
_id: '20912'
abstract:
- lang: eng
text: Mechatronics is the close interaction of mechanics, electronics, control
engineering and software engineering. The increasing complexity of mechatronic
systems results in a challenging development process and particularly requires
a consistent comprehension of the tasks between all the engineers involved. Especially
during the early design phases, the communication and cooperation between the
mechanical, electrical, control and software engineers is necessary to establish
a basis for efficient and effective product development. The approach of Model-Based
Systems Engineering focuses on this aspect by means of an abstract but superordinate
system model. It enables a holistic view of the system. The system model can be
specified using the Systems Modeling Language (SysML). The language allows many
degrees of freedom to specify a fact, bearing in mind that different system architects
can specify the same fact in different ways. This leads to system models that
can be interpreted in many ways. Thus, these models are hard to consistently compare
and interpret, resulting in communication issues. In order to tackle this problem,
we present a concept that uses modeling rules supporting model comparability.
We formalize them by means of checks implemented in the programming language Java
and the Object Constraint Language (OCL) in order to automatically verify the
system model’s compliance with these rules.
author:
- first_name: Lydia
full_name: Kaiser, Lydia
last_name: Kaiser
- first_name: Roman
full_name: Dumitrescu, Roman
last_name: Dumitrescu
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
citation:
ama: 'Kaiser L, Dumitrescu R, Holtmann J, Meyer M. Automatic Verification of Modeling
Rules in Systems Engineering for Mechatronic Systems. In: Volume 2B: 33rd Computers
and Information in Engineering Conference. ; 2014. doi:10.1115/detc2013-12330'
apa: 'Kaiser, L., Dumitrescu, R., Holtmann, J., & Meyer, M. (2014). Automatic
Verification of Modeling Rules in Systems Engineering for Mechatronic Systems.
In Volume 2B: 33rd Computers and Information in Engineering Conference.
https://doi.org/10.1115/detc2013-12330'
bibtex: '@inproceedings{Kaiser_Dumitrescu_Holtmann_Meyer_2014, title={Automatic
Verification of Modeling Rules in Systems Engineering for Mechatronic Systems},
DOI={10.1115/detc2013-12330},
booktitle={Volume 2B: 33rd Computers and Information in Engineering Conference},
author={Kaiser, Lydia and Dumitrescu, Roman and Holtmann, Jörg and Meyer, Matthias},
year={2014} }'
chicago: 'Kaiser, Lydia, Roman Dumitrescu, Jörg Holtmann, and Matthias Meyer. “Automatic
Verification of Modeling Rules in Systems Engineering for Mechatronic Systems.”
In Volume 2B: 33rd Computers and Information in Engineering Conference,
2014. https://doi.org/10.1115/detc2013-12330.'
ieee: 'L. Kaiser, R. Dumitrescu, J. Holtmann, and M. Meyer, “Automatic Verification
of Modeling Rules in Systems Engineering for Mechatronic Systems,” in Volume
2B: 33rd Computers and Information in Engineering Conference, 2014.'
mla: 'Kaiser, Lydia, et al. “Automatic Verification of Modeling Rules in Systems
Engineering for Mechatronic Systems.” Volume 2B: 33rd Computers and Information
in Engineering Conference, 2014, doi:10.1115/detc2013-12330.'
short: 'L. Kaiser, R. Dumitrescu, J. Holtmann, M. Meyer, in: Volume 2B: 33rd Computers
and Information in Engineering Conference, 2014.'
date_created: 2021-01-12T14:19:33Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '241'
doi: 10.1115/detc2013-12330
language:
- iso: eng
publication: 'Volume 2B: 33rd Computers and Information in Engineering Conference'
publication_identifier:
isbn:
- '9780791855867'
publication_status: published
status: public
title: Automatic Verification of Modeling Rules in Systems Engineering for Mechatronic
Systems
type: conference
user_id: '15249'
year: '2014'
...
---
_id: '20924'
author:
- first_name: Christoph
full_name: Ebbert, Christoph
id: '7266'
last_name: Ebbert
- first_name: N.
full_name: Alissawi, N.
last_name: Alissawi
- first_name: C.
full_name: Somsen, C.
last_name: Somsen
- first_name: G.
full_name: Eggeler, G.
last_name: Eggeler
- first_name: T.
full_name: Strunskus, T.
last_name: Strunskus
- first_name: F.
full_name: Faupel, F.
last_name: Faupel
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Ebbert C, Alissawi N, Somsen C, et al. Spectroelectrochemical and morphological
studies of the ageing of silver nanoparticles embedded in ultra-thin perfluorinated
sputter deposited films. Thin Solid Films. 2014:161-167. doi:10.1016/j.tsf.2014.10.054
apa: Ebbert, C., Alissawi, N., Somsen, C., Eggeler, G., Strunskus, T., Faupel, F.,
& Grundmeier, G. (2014). Spectroelectrochemical and morphological studies
of the ageing of silver nanoparticles embedded in ultra-thin perfluorinated sputter
deposited films. Thin Solid Films, 161–167. https://doi.org/10.1016/j.tsf.2014.10.054
bibtex: '@article{Ebbert_Alissawi_Somsen_Eggeler_Strunskus_Faupel_Grundmeier_2014,
title={Spectroelectrochemical and morphological studies of the ageing of silver
nanoparticles embedded in ultra-thin perfluorinated sputter deposited films},
DOI={10.1016/j.tsf.2014.10.054},
journal={Thin Solid Films}, author={Ebbert, Christoph and Alissawi, N. and Somsen,
C. and Eggeler, G. and Strunskus, T. and Faupel, F. and Grundmeier, Guido}, year={2014},
pages={161–167} }'
chicago: Ebbert, Christoph, N. Alissawi, C. Somsen, G. Eggeler, T. Strunskus, F.
Faupel, and Guido Grundmeier. “Spectroelectrochemical and Morphological Studies
of the Ageing of Silver Nanoparticles Embedded in Ultra-Thin Perfluorinated Sputter
Deposited Films.” Thin Solid Films, 2014, 161–67. https://doi.org/10.1016/j.tsf.2014.10.054.
ieee: C. Ebbert et al., “Spectroelectrochemical and morphological studies
of the ageing of silver nanoparticles embedded in ultra-thin perfluorinated sputter
deposited films,” Thin Solid Films, pp. 161–167, 2014.
mla: Ebbert, Christoph, et al. “Spectroelectrochemical and Morphological Studies
of the Ageing of Silver Nanoparticles Embedded in Ultra-Thin Perfluorinated Sputter
Deposited Films.” Thin Solid Films, 2014, pp. 161–67, doi:10.1016/j.tsf.2014.10.054.
short: C. Ebbert, N. Alissawi, C. Somsen, G. Eggeler, T. Strunskus, F. Faupel, G.
Grundmeier, Thin Solid Films (2014) 161–167.
date_created: 2021-01-13T09:16:32Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '321'
doi: 10.1016/j.tsf.2014.10.054
language:
- iso: eng
page: 161-167
publication: Thin Solid Films
publication_identifier:
issn:
- 0040-6090
publication_status: published
status: public
title: Spectroelectrochemical and morphological studies of the ageing of silver nanoparticles
embedded in ultra-thin perfluorinated sputter deposited films
type: journal_article
user_id: '7266'
year: '2014'
...
---
_id: '22176'
abstract:
- lang: eng
text: One barrier of laser sintering (LS) to become the main process for Direct
Manufacturing (DM) is the surface quality of LS parts. Hence, the property which
has to be improved is the rough surfaces of LS parts due to the layered structure.
Another additional effect is the incomplete melting of powder particles on the
surface due to the high process temperature. In this paper we demonstrate our
approach of a theoretical model for the topography of LS part surfaces. We investigated
the surface roughness as a function of surface orientation. Considering that the
model involves further variables as layer thickness, particle density and particle
size distribution to describe the topography precisely. Experimental results were
used to optimize and check the results of the model.
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: A.A.
full_name: Herale, A.A.
last_name: Herale
- first_name: Z.
full_name: Li, Z.
last_name: Li
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Herale AA, Li Z, Schmid H-J. Simulation of the Surface Topography
on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform
Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf'
apa: Delfs, P., Herale, A. A., Li, Z., & Schmid, H.-J. (2014). Simulation of
the Surface Topography on Laser Sintered Polymer Parts. In 25th Annual International
Solid Freeform Fabrication Symposium (Vol. 25, pp. 1250–1258). http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
bibtex: '@inproceedings{Delfs_Herale_Li_Schmid_2014, title={Simulation of the Surface
Topography on Laser Sintered Polymer Parts}, volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Herale, A.A. and Li, Z. and Schmid, Hans-Joachim}, year={2014}, pages={1250–1258}
}'
chicago: Delfs, Patrick, A.A. Herale, Z. Li, and Hans-Joachim Schmid. “Simulation
of the Surface Topography on Laser Sintered Polymer Parts.” In 25th Annual
International Solid Freeform Fabrication Symposium, 25:1250–58, 2014. http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
ieee: P. Delfs, A. A. Herale, Z. Li, and H.-J. Schmid, “Simulation of the Surface
Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid
Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
mla: Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered
Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium,
vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
short: 'P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International
Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.'
date_created: 2021-05-14T07:46:05Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
intvolume: ' 25'
language:
- iso: eng
page: 1250-1258
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Simulation of the Surface Topography on Laser Sintered Polymer Parts
type: conference
user_id: '71545'
volume: 25
year: '2014'
...
---
_id: '22177'
abstract:
- lang: eng
text: An uneven temperature distribution and varying cooling rates at different
positions within the part cake are two of the most important challenges regarding
the part quality and reproducibility of the polymer laser sintering process. In
the presented work, a temperature measurement system is implemented within an
EOSINT P395 laser sintering system. It allows the determination of a three dimensional
temperature distribution and history during the full build and cooling process.
The influence of important job parameters, for example the packing density, job
height and layer thickness, can be figured out. In combination with a finite element
simulation of the cooling process, the temperature measurement will be the basis
for optimized process controls.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Schmid H-J. Three-dimensional in-process temperature measurement
of laser sintered part cakes. In: 25th Annual International Solid Freeform
Fabrication Symposium. Vol 25. ; 2014:49-58. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf'
apa: Josupeit, S., & Schmid, H.-J. (2014). Three-dimensional in-process temperature
measurement of laser sintered part cakes. In 25th Annual International Solid
Freeform Fabrication Symposium (Vol. 25, pp. 49–58). http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Schmid_2014, title={Three-dimensional in-process
temperature measurement of laser sintered part cakes}, volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit,
Stefan and Schmid, Hans-Joachim}, year={2014}, pages={49–58} }'
chicago: Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process
Temperature Measurement of Laser Sintered Part Cakes.” In 25th Annual International
Solid Freeform Fabrication Symposium, 25:49–58, 2014. http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
ieee: S. Josupeit and H.-J. Schmid, “Three-dimensional in-process temperature measurement
of laser sintered part cakes,” in 25th Annual International Solid Freeform
Fabrication Symposium, 2014, vol. 25, pp. 49–58.
mla: Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature
Measurement of Laser Sintered Part Cakes.” 25th Annual International Solid
Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
short: 'S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform
Fabrication Symposium, 2014, pp. 49–58.'
date_created: 2021-05-14T07:46:06Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
intvolume: ' 25'
language:
- iso: eng
page: 49-58
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Three-dimensional in-process temperature measurement of laser sintered part
cakes
type: conference
user_id: '71545'
volume: 25
year: '2014'
...
---
_id: '22184'
abstract:
- lang: eng
text: Polymer laser sintering is one of the most important additive manufacturing
technologies for the tool-less production of three-dimensional prototypes and
end-use parts. In this process, parts are manufactured layerwise out of a polymer
powder by laser exposure. After the building process, these parts are located
within a loose bulk powder cake. Due to long process times and high process temperatures,
this powder ages thermally, which reduces the recyclability of the material. As
a result, mixtures of used and virgin powder ("refreshed" powder) with a mixture
ratio of approximately 50% are commonly used in the industry. The goal of this
work is to determine the exact influence of different powder ages on resulting
part quality characteristics, especially the mechanical behavior and the surface
quality. Therefore, refreshed powder with different qualities adjusted by the
melt volume rate (MVR) was processed along a defined process quality chain. To
analyze the part qualities, mechanical tensile and profilometer tests were performed.
The focus is on an application-oriented test set-up to ensure the usability of
the results in the industry. The material used is polyamide 12 (PA 2200) processed
on an EOSINT P395 laser sintering system from EOS GmbH, Krailling, Germany.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: N.
full_name: Rupp, N.
last_name: Rupp
- first_name: Monika
full_name: Gessler, Monika
last_name: Gessler
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Rüsenberg S, Rupp N, Gessler M, Schmid H-J. Thermal ageing of
polyamide 12 used for polymer laser sintering - influence on part quality characteristics.
In: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2014). Vol 72. ; 2014:2383-2385. doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics'
apa: Josupeit, S., Rüsenberg, S., Rupp, N., Gessler, M., & Schmid, H.-J. (2014).
Thermal ageing of polyamide 12 used for polymer laser sintering - influence on
part quality characteristics. In 72nd Annual Technical Conference of the Society
of Plastics Engineers (ANTEC 2014) (Vol. 72, pp. 2383–2385). https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
bibtex: '@inproceedings{Josupeit_Rüsenberg_Rupp_Gessler_Schmid_2014, title={Thermal
ageing of polyamide 12 used for polymer laser sintering - influence on part quality
characteristics}, volume={72}, DOI={https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics},
number={3}, booktitle={72nd Annual Technical Conference of the Society of Plastics
Engineers (ANTEC 2014)}, author={Josupeit, Stefan and Rüsenberg, Stefan and Rupp,
N. and Gessler, Monika and Schmid, Hans-Joachim}, year={2014}, pages={2383–2385}
}'
chicago: Josupeit, Stefan, Stefan Rüsenberg, N. Rupp, Monika Gessler, and Hans-Joachim
Schmid. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence
on Part Quality Characteristics.” In 72nd Annual Technical Conference of the
Society of Plastics Engineers (ANTEC 2014), 72:2383–85, 2014. https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
ieee: S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, and H.-J. Schmid, “Thermal
ageing of polyamide 12 used for polymer laser sintering - influence on part quality
characteristics,” in 72nd Annual Technical Conference of the Society of Plastics
Engineers (ANTEC 2014), 2014, vol. 72, no. 3, pp. 2383–2385.
mla: Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser
Sintering - Influence on Part Quality Characteristics.” 72nd Annual Technical
Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no.
3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
short: 'S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual
Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014,
pp. 2383–2385.'
date_created: 2021-05-14T07:46:14Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
intvolume: ' 72'
issue: '3'
language:
- iso: eng
page: 2383-2385
publication: 72nd Annual Technical Conference of the Society of Plastics Engineers
(ANTEC 2014)
publication_identifier:
isbn:
- 978-1-634-39708-7
status: public
title: Thermal ageing of polyamide 12 used for polymer laser sintering - influence
on part quality characteristics
type: conference
user_id: '71545'
volume: 72
year: '2014'
...
---
_id: '22193'
abstract:
- lang: eng
text: The process-related occurrence of varying cooling rates at different positions
within the part cake is an important challenge regarding the part quality and
reproducibility of the polymer laser sintering process. Temperature history dependent
parameters are for example the part warpage, the crystallization behavior or powder
ageing effects, which have to be considered for optimized process controls. Nevertheless,
the inner temperature distribution and history during the cooling process is difficult
to measure and less known yet. In this work, a Finite Element (FE) model is developed
to understand and predict the temperature distribution and history within the
part cake during the cooling process. Therefore, the thermal boundary conditions
of a laser sintering system are analyzed and relevant parameters are identified.
A basic FE model is set up in ABAQUS CAE software considering a part-free powder
cake. Important thermal parameters of the bulk powder and the environment are
adjusted and verified in relation to experimental in-process measured data. With
this model it is possible to predict position-dependent cooling rates as a function
of significant job parameters, for example the job height or the environmental
conditions during the cooling phase. In combination with extended in-process temperature
measurements and a consideration of built parts, this model will be an important
tool for the development of optimized process controls.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: L.
full_name: Ordia, L.
last_name: Ordia
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Ordia L, Schmid H-J. Development of a Basic Model to Simulate
the Laser Sintering Cooling Process. In: International Conference on Additive
Technologies. Vol 5. ; 2014:222-227. doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf'
apa: Josupeit, S., Ordia, L., & Schmid, H.-J. (2014). Development of a Basic
Model to Simulate the Laser Sintering Cooling Process. In International Conference
on Additive Technologies (Vol. 5, pp. 222–227). https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
bibtex: '@inproceedings{Josupeit_Ordia_Schmid_2014, title={Development of a Basic
Model to Simulate the Laser Sintering Cooling Process}, volume={5}, DOI={https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf},
booktitle={International Conference on Additive Technologies}, author={Josupeit,
Stefan and Ordia, L. and Schmid, Hans-Joachim}, year={2014}, pages={222–227} }'
chicago: Josupeit, Stefan, L. Ordia, and Hans-Joachim Schmid. “Development of a
Basic Model to Simulate the Laser Sintering Cooling Process.” In International
Conference on Additive Technologies, 5:222–27, 2014. https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
ieee: S. Josupeit, L. Ordia, and H.-J. Schmid, “Development of a Basic Model to
Simulate the Laser Sintering Cooling Process,” in International Conference
on Additive Technologies, 2014, vol. 5, pp. 222–227.
mla: Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser
Sintering Cooling Process.” International Conference on Additive Technologies,
vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
short: 'S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive
Technologies, 2014, pp. 222–227.'
date_created: 2021-05-14T07:46:25Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
intvolume: ' 5'
language:
- iso: eng
page: 222-227
publication: International Conference on Additive Technologies
publication_identifier:
isbn:
- 978-961-281-579-0
status: public
title: Development of a Basic Model to Simulate the Laser Sintering Cooling Process
type: conference
user_id: '71545'
volume: 5
year: '2014'
...
---
_id: '22203'
abstract:
- lang: eng
text: One barrier of laser sintering (LS) to become the main process for Direct
Manufacturing (DM) is the surface quality of LS parts. Hence, the property which
has to be improved is the rough surfaces of LS parts due to the layered structure.
Another additional effect is the incomplete melting of powder particles on the
surface due to the high process temperature. In this paper we demonstrate our
approach of a theoretical model for the topography of LS part surfaces. We investigated
the surface roughness as a function of surface orientation. Considering that the
model involves further variables as layer thickness, particle density and particle
size distribution to describe the topography precisely. Experimental results were
used to optimize and check the results of the model.
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Schmid H-J. Simulation of the Surface Topography on Laser Sintered
Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium.
Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf'
apa: Delfs, P., & Schmid, H.-J. (2014). Simulation of the Surface Topography
on Laser Sintered Polymer Parts. In 25th Annual International Solid Freeform
Fabrication Symposium (Vol. 25, pp. 1250–1258). http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
bibtex: '@inproceedings{Delfs_Schmid_2014, title={Simulation of the Surface Topography
on Laser Sintered Polymer Parts}, volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Schmid, Hans-Joachim}, year={2014}, pages={1250–1258} }'
chicago: Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography
on Laser Sintered Polymer Parts.” In 25th Annual International Solid Freeform
Fabrication Symposium, 25:1250–58, 2014. http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
ieee: P. Delfs and H.-J. Schmid, “Simulation of the Surface Topography on Laser
Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication
Symposium, 2014, vol. 25, pp. 1250–1258.
mla: Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography
on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform
Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
short: 'P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication
Symposium, 2014, pp. 1250–1258.'
date_created: 2021-05-14T07:46:36Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
intvolume: ' 25'
language:
- iso: eng
page: 1250-1258
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Simulation of the Surface Topography on Laser Sintered Polymer Parts
type: conference
user_id: '71545'
volume: 25
year: '2014'
...
---
_id: '22382'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Adam G, Zimmer D. Extension of prior developed design rules (LS). In: ASPE
- Spring Topical Meeting 2014. ; 2014. doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
'
apa: Adam, G., & Zimmer, D. (2014). Extension of prior developed design rules
(LS). In ASPE - Spring topical meeting 2014. https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
bibtex: '@inproceedings{Adam_Zimmer_2014, title={Extension of prior developed design
rules (LS)}, DOI={https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
}, booktitle={ASPE - Spring topical meeting 2014}, author={Adam, Guido and
Zimmer, Detmar}, year={2014} }'
chicago: Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules
(LS).” In ASPE - Spring Topical Meeting 2014, 2014. https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
.
ieee: G. Adam and D. Zimmer, “Extension of prior developed design rules (LS),” in
ASPE - Spring topical meeting 2014, 2014.
mla: Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules
(LS).” ASPE - Spring Topical Meeting 2014, 2014, doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
.
short: 'G. Adam, D. Zimmer, in: ASPE - Spring Topical Meeting 2014, 2014.'
date_created: 2021-06-15T11:09:06Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 'https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering '
language:
- iso: eng
publication: ASPE - Spring topical meeting 2014
status: public
title: Extension of prior developed design rules (LS)
type: conference
user_id: '38077'
year: '2014'
...
---
_id: '22383'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Adam G, Zimmer D. Systematic investigations of minimum feature sizes and geometrical
accuracies. In: ; 2014.'
apa: Adam, G., & Zimmer, D. (2014). Systematic investigations of minimum feature
sizes and geometrical accuracies.
bibtex: '@inproceedings{Adam_Zimmer_2014, title={Systematic investigations of minimum
feature sizes and geometrical accuracies}, author={Adam, Guido and Zimmer, Detmar},
year={2014} }'
chicago: Adam, Guido, and Detmar Zimmer. “Systematic Investigations of Minimum Feature
Sizes and Geometrical Accuracies,” 2014.
ieee: G. Adam and D. Zimmer, “Systematic investigations of minimum feature sizes
and geometrical accuracies,” 2014.
mla: Adam, Guido, and Detmar Zimmer. Systematic Investigations of Minimum Feature
Sizes and Geometrical Accuracies. 2014.
short: 'G. Adam, D. Zimmer, in: 2014.'
date_created: 2021-06-15T11:09:07Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
status: public
title: Systematic investigations of minimum feature sizes and geometrical accuracies
type: conference
user_id: '38077'
year: '2014'
...
---
_id: '22384'
abstract:
- lang: eng
text: 'Additive Manufacturing technologies create parts layer by layer. Thereby,
lots of benefits are offered. Especially extended design freedoms provide new
potentials for the design of technical parts. To make these benefits accessible
to different user groups, design rules for Additive Manufacturing were developed
within the project ‘‘Direct Manufacturing Design Rules’’. Therefore a process
independent method was defined first. Next, design rules were developed for Laser
Sintering, Laser Melting and Fused Deposition Modeling. The results were summarized
in a design rule catalog and support a suitable design for Additive Manufacturing '
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Adam G, Zimmer D. Design for Additive Manufacturing - Element transitions and
aggregated structures. CIRP Journal of Manufacturing Science and Technology.
2014;7(1):20-28. doi:10.1016/j.cirpj.2013.10.001
apa: Adam, G., & Zimmer, D. (2014). Design for Additive Manufacturing - Element
transitions and aggregated structures. CIRP Journal of Manufacturing Science
and Technology, 7(1), 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001
bibtex: '@article{Adam_Zimmer_2014, title={Design for Additive Manufacturing - Element
transitions and aggregated structures}, volume={7}, DOI={10.1016/j.cirpj.2013.10.001 }, number={1}, journal={CIRP Journal of Manufacturing
Science and Technology}, author={Adam, Guido and Zimmer, Detmar}, year={2014},
pages={20–28} }'
chicago: 'Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element
Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science
and Technology 7, no. 1 (2014): 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001 .'
ieee: G. Adam and D. Zimmer, “Design for Additive Manufacturing - Element transitions
and aggregated structures,” CIRP Journal of Manufacturing Science and Technology,
vol. 7, no. 1, pp. 20–28, 2014.
mla: Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element
Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science
and Technology, vol. 7, no. 1, 2014, pp. 20–28, doi:10.1016/j.cirpj.2013.10.001 .
short: G. Adam, D. Zimmer, CIRP Journal of Manufacturing Science and Technology
7 (2014) 20–28.
date_created: 2021-06-15T11:09:08Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: '10.1016/j.cirpj.2013.10.001 '
intvolume: ' 7'
issue: '1'
language:
- iso: eng
page: 20-28
publication: CIRP Journal of Manufacturing Science and Technology
status: public
title: Design for Additive Manufacturing - Element transitions and aggregated structures
type: journal_article
user_id: '38077'
volume: 7
year: '2014'
...
---
_id: '22385'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: 'Adam G. Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern.
In: ; 2014.'
apa: Adam, G. (2014). Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln
beim Lasersintern.
bibtex: '@inproceedings{Adam_2014, title={Erweiterung des Gültigkeitsbereichs von
Konstruktionsregeln beim Lasersintern}, author={Adam, Guido}, year={2014} }'
chicago: Adam, Guido. “Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln
Beim Lasersintern,” 2014.
ieee: G. Adam, “Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim
Lasersintern,” 2014.
mla: Adam, Guido. Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln
Beim Lasersintern. 2014.
short: 'G. Adam, in: 2014.'
date_created: 2021-06-15T11:09:09Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
status: public
title: Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern
type: conference
user_id: '38077'
year: '2014'
...