---
_id: '16255'
author:
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: T.
  full_name: Niendorf, T.
  last_name: Niendorf
citation:
  ama: 'Leuders S, Riemer A, Richard HA, Tröster T, Niendorf T. Selective-Laser-Melting
    materials under cyclic loading: Influence of process-inherent defects on the initiation
    and propagation of fatigue cracks. In: ; 2014.'
  apa: 'Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Niendorf, T. (2014).
    Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent
    defects on the initiation and propagation of fatigue cracks. Presented at the
    25th Colloquium on Fatigue Mechanisms, Erlangen, Germany.'
  bibtex: '@inproceedings{Leuders_Riemer_Richard_Tröster_Niendorf_2014, title={Selective-Laser-Melting
    materials under cyclic loading: Influence of process-inherent defects on the initiation
    and propagation of fatigue cracks}, author={Leuders, S. and Riemer, A. and Richard,
    H. A. and Tröster, Thomas and Niendorf, T.}, year={2014} }'
  chicago: 'Leuders, S., A. Riemer, H. A. Richard, Thomas Tröster, and T. Niendorf.
    “Selective-Laser-Melting Materials under Cyclic Loading: Influence of Process-Inherent
    Defects on the Initiation and Propagation of Fatigue Cracks,” 2014.'
  ieee: 'S. Leuders, A. Riemer, H. A. Richard, T. Tröster, and T. Niendorf, “Selective-Laser-Melting
    materials under cyclic loading: Influence of process-inherent defects on the initiation
    and propagation of fatigue cracks,” presented at the 25th Colloquium on Fatigue
    Mechanisms, Erlangen, Germany, 2014.'
  mla: 'Leuders, S., et al. <i>Selective-Laser-Melting Materials under Cyclic Loading:
    Influence of Process-Inherent Defects on the Initiation and Propagation of Fatigue
    Cracks</i>. 2014.'
  short: 'S. Leuders, A. Riemer, H.A. Richard, T. Tröster, T. Niendorf, in: 2014.'
conference:
  end_date: 2014-03-28
  location: Erlangen, Germany
  name: 25th Colloquium on Fatigue Mechanisms
  start_date: 2014-03-27
date_created: 2020-03-09T07:40:04Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: 'Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent
  defects on the initiation and propagation of fatigue cracks'
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16256'
author:
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: F.
  full_name: Brenne, F.
  last_name: Brenne
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
- first_name: T.
  full_name: Niendorf, T.
  last_name: Niendorf
citation:
  ama: 'Leuders S, Tröster T, Brenne F, Riemer A, Richard HA, Niendorf T. Evaluation
    of the effect of defects on the mechanical performance of components manufactured
    by selective laser melting. In: ; 2014.'
  apa: 'Leuders, S., Tröster, T., Brenne, F., Riemer, A., Richard, H. A., &#38; Niendorf,
    T. (2014). Evaluation of the effect of defects on the mechanical performance of
    components manufactured by selective laser melting. Presented at the American
    Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy
    and Surface Finish in Additive Manufacturing, San Francisco, California, USA.'
  bibtex: '@inproceedings{Leuders_Tröster_Brenne_Riemer_Richard_Niendorf_2014, title={Evaluation
    of the effect of defects on the mechanical performance of components manufactured
    by selective laser melting}, author={Leuders, S. and Tröster, Thomas and Brenne,
    F. and Riemer, A. and Richard, H. A. and Niendorf, T.}, year={2014} }'
  chicago: Leuders, S., Thomas Tröster, F. Brenne, A. Riemer, H. A. Richard, and T.
    Niendorf. “Evaluation of the Effect of Defects on the Mechanical Performance of
    Components Manufactured by Selective Laser Melting,” 2014.
  ieee: 'S. Leuders, T. Tröster, F. Brenne, A. Riemer, H. A. Richard, and T. Niendorf,
    “Evaluation of the effect of defects on the mechanical performance of components
    manufactured by selective laser melting,” presented at the American Society for
    Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy and Surface
    Finish in Additive Manufacturing, San Francisco, California, USA, 2014.'
  mla: Leuders, S., et al. <i>Evaluation of the Effect of Defects on the Mechanical
    Performance of Components Manufactured by Selective Laser Melting</i>. 2014.
  short: 'S. Leuders, T. Tröster, F. Brenne, A. Riemer, H.A. Richard, T. Niendorf,
    in: 2014.'
conference:
  end_date: 2014-04-16
  location: San Francisco, California, USA
  name: 'American Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional
    Accuracy and Surface Finish in Additive Manufacturing'
  start_date: 2014-04-13
date_created: 2020-03-09T07:42:49Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Evaluation of the effect of defects on the mechanical performance of components
  manufactured by selective laser melting
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16257'
author:
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
- first_name: T.
  full_name: Niendorf, T.
  last_name: Niendorf
citation:
  ama: 'Leuders S, Tröster T, Riemer A, Richard HA, Niendorf T. On the mechanical
    performance of structures manufactured by selective laser melting: Damage initiation
    and propagation. In: ; 2014.'
  apa: 'Leuders, S., Tröster, T., Riemer, A., Richard, H. A., &#38; Niendorf, T. (2014).
    On the mechanical performance of structures manufactured by selective laser melting:
    Damage initiation and propagation. Presented at the Additive Manufacturing with
    Powder Metallurgy Conference, Orlando, Florida, USA.'
  bibtex: '@inproceedings{Leuders_Tröster_Riemer_Richard_Niendorf_2014, title={On
    the mechanical performance of structures manufactured by selective laser melting:
    Damage initiation and propagation}, author={Leuders, S. and Tröster, Thomas and
    Riemer, A. and Richard, H. A. and Niendorf, T.}, year={2014} }'
  chicago: 'Leuders, S., Thomas Tröster, A. Riemer, H. A. Richard, and T. Niendorf.
    “On the Mechanical Performance of Structures Manufactured by Selective Laser Melting:
    Damage Initiation and Propagation,” 2014.'
  ieee: 'S. Leuders, T. Tröster, A. Riemer, H. A. Richard, and T. Niendorf, “On the
    mechanical performance of structures manufactured by selective laser melting:
    Damage initiation and propagation,” presented at the Additive Manufacturing with
    Powder Metallurgy Conference, Orlando, Florida, USA, 2014.'
  mla: 'Leuders, S., et al. <i>On the Mechanical Performance of Structures Manufactured
    by Selective Laser Melting: Damage Initiation and Propagation</i>. 2014.'
  short: 'S. Leuders, T. Tröster, A. Riemer, H.A. Richard, T. Niendorf, in: 2014.'
conference:
  end_date: 2014-05-20
  location: Orlando, Florida, USA
  name: Additive Manufacturing with Powder Metallurgy Conference
  start_date: 2014-05-18
date_created: 2020-03-09T07:45:09Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: 'On the mechanical performance of structures manufactured by selective laser
  melting: Damage initiation and propagation'
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '22030'
abstract:
- lang: eng
  text: Parts produced by Fused Deposition Modeling (FDM) tend to have rough and undulating
    surfaces with staircase effects on rounded and slanting areas of the part. This
    is due to the characteristics of the process. In many fields of application, high
    demands are made on the optical quality of the part. An improvement in the surface
    quality of FDM parts made of Ultem*9085 can be achieved through post-treatment
    with a mass finishing process. In this paper, FDM specimens are post-treated in
    a disk finishing unit. Influences of the mass finishing process are analyzed with
    regard to the dependence of surface quality on the various process parameters
    and on the finishing medium, grinding time and grinding speed. The finishing efficiency
    depends on the finishing media and decreases for lower finishing time. For all
    media a lower disk velocity results a smaller grinding effect, but there are clearly
    differences between the finishing media. The paper also discusses effects of the
    grinding process on the mechanical properties of the parts. Especially small part
    geometries and parts build in z-direction tend to break during the finishing process.
author:
- first_name: M.
  full_name: Fischer, M.
  last_name: Fischer
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Fischer M, Schöppner V. Effects of a mass finishing process on parts produced
    from Ultem 9085 by Fused Deposition Modeling. In: <i>ANTEC</i>. SPE: Society of
    Plastics Engineers; 2014:2331-2336.'
  apa: Fischer, M., &#38; Schöppner, V. (2014). Effects of a mass finishing process
    on parts produced from Ultem 9085 by Fused Deposition Modeling. <i>ANTEC</i>,
    2331–2336.
  bibtex: '@inproceedings{Fischer_Schöppner_2014, title={Effects of a mass finishing
    process on parts produced from Ultem 9085 by Fused Deposition Modeling}, booktitle={ANTEC},
    publisher={SPE: Society of Plastics Engineers}, author={Fischer, M. and Schöppner,
    Volker}, year={2014}, pages={2331–2336} }'
  chicago: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process
    on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” In <i>ANTEC</i>,
    2331–36. SPE: Society of Plastics Engineers, 2014.'
  ieee: M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts
    produced from Ultem 9085 by Fused Deposition Modeling,” in <i>ANTEC</i>, 2014,
    pp. 2331–2336.
  mla: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on
    Parts Produced from Ultem 9085 by Fused Deposition Modeling.” <i>ANTEC</i>, SPE:
    Society of Plastics Engineers, 2014, pp. 2331–36.'
  short: 'M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers,
    2014, pp. 2331–2336.'
date_created: 2021-05-07T13:23:11Z
date_updated: 2022-04-25T08:03:55Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
language:
- iso: eng
page: 2331-2336
publication: ANTEC
publication_identifier:
  isbn:
  - 978-1-63439-708-7
publisher: 'SPE: Society of Plastics Engineers'
quality_controlled: '1'
status: public
title: Effects of a mass finishing process on parts produced from Ultem 9085 by Fused
  Deposition Modeling
type: conference
user_id: '70729'
year: '2014'
...
---
_id: '22021'
abstract:
- lang: eng
  text: Additive production techniques have the advantage of manufacturing parts without
    needing a forming tool. One of the most used additive manufacturing processes
    is "Fused Deposition Modeling" (FDM) which allows the production of prototypes
    and end-use parts. Due to the manufacture layer by layer, also complex part geometries
    can be created in one working step. Furthermore, lightweight parts with specific
    inner core structures can be manufactured in order to achieve good weightrelated
    strength properties. In this paper the mechanical behavior of lightweight parts
    manufactured with the 3D production system Fortus 400mc from Stratasys and the
    material Polyetherimide (PEI) with the trade name Ultem*9085 is analyzed. The
    test specimens were built up with different inner structures and building directions.
    Therefore, test specimens with known lightweight core geometries (e.g. corrugated
    and honeycomb cores) were designed. A four-point bending test was conducted to
    analyze the strength properties as well as the weight-related strength properties.
    Additionally the influence of the structure width, the structure wall thickness
    and the top layer thickness was analyzed using a honeycomb structure.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: S.
  full_name: Josupeit, S.
  last_name: Josupeit
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Josupeit S, Schöppner V, Klemp E. Mechanical Analysis of Lightweight
    Constructions manufactured with Fused Deposition Modeling. In: <i>29th International
    Conference of the Polymer Processing Society</i>. Vol 29. American Institute of
    Physics ; 2014:696-701. doi:<a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>'
  apa: Bagsik, A., Josupeit, S., Schöppner, V., &#38; Klemp, E. (2014). Mechanical
    Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling.
    <i>29th International Conference of the Polymer Processing Society</i>, <i>29</i>,
    696–701. <a href="https://doi.org/10.1063/1.4873874">https://doi.org/10.1063/1.4873874</a>
  bibtex: '@inproceedings{Bagsik_Josupeit_Schöppner_Klemp_2014, title={Mechanical
    Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling},
    volume={29}, DOI={<a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>},
    booktitle={29th International Conference of the Polymer Processing Society}, publisher={American
    Institute of Physics }, author={Bagsik, A. and Josupeit, S. and Schöppner, Volker
    and Klemp, E.}, year={2014}, pages={696–701} }'
  chicago: Bagsik, A., S. Josupeit, Volker Schöppner, and E. Klemp. “Mechanical Analysis
    of Lightweight Constructions Manufactured with Fused Deposition Modeling.” In
    <i>29th International Conference of the Polymer Processing Society</i>, 29:696–701.
    American Institute of Physics , 2014. <a href="https://doi.org/10.1063/1.4873874">https://doi.org/10.1063/1.4873874</a>.
  ieee: 'A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis
    of Lightweight Constructions manufactured with Fused Deposition Modeling,” in
    <i>29th International Conference of the Polymer Processing Society</i>, 2014,
    vol. 29, pp. 696–701, doi: <a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>.'
  mla: Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured
    with Fused Deposition Modeling.” <i>29th International Conference of the Polymer
    Processing Society</i>, vol. 29, American Institute of Physics , 2014, pp. 696–701,
    doi:<a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>.
  short: 'A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference
    of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.'
date_created: 2021-05-07T13:23:00Z
date_updated: 2022-04-25T08:05:29Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.4873874
intvolume: '        29'
language:
- iso: eng
page: 696-701
publication: 29th International Conference of the Polymer Processing Society
publisher: 'American Institute of Physics '
quality_controlled: '1'
status: public
title: Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition
  Modeling
type: conference
user_id: '70729'
volume: 29
year: '2014'
...
---
_id: '31294'
article_number: '101501'
author:
- first_name: Tobias
  full_name: Weich, Tobias
  id: '49178'
  last_name: Weich
  orcid: 0000-0002-9648-6919
citation:
  ama: Weich T. Equivariant spectral asymptotics for<i>h</i>-pseudodifferential operators.
    <i>Journal of Mathematical Physics</i>. 2014;55(10). doi:<a href="https://doi.org/10.1063/1.4896698">10.1063/1.4896698</a>
  apa: Weich, T. (2014). Equivariant spectral asymptotics for<i>h</i>-pseudodifferential
    operators. <i>Journal of Mathematical Physics</i>, <i>55</i>(10), Article 101501.
    <a href="https://doi.org/10.1063/1.4896698">https://doi.org/10.1063/1.4896698</a>
  bibtex: '@article{Weich_2014, title={Equivariant spectral asymptotics for<i>h</i>-pseudodifferential
    operators}, volume={55}, DOI={<a href="https://doi.org/10.1063/1.4896698">10.1063/1.4896698</a>},
    number={10101501}, journal={Journal of Mathematical Physics}, publisher={AIP Publishing},
    author={Weich, Tobias}, year={2014} }'
  chicago: Weich, Tobias. “Equivariant Spectral Asymptotics for<i>h</i>-Pseudodifferential
    Operators.” <i>Journal of Mathematical Physics</i> 55, no. 10 (2014). <a href="https://doi.org/10.1063/1.4896698">https://doi.org/10.1063/1.4896698</a>.
  ieee: 'T. Weich, “Equivariant spectral asymptotics for<i>h</i>-pseudodifferential
    operators,” <i>Journal of Mathematical Physics</i>, vol. 55, no. 10, Art. no.
    101501, 2014, doi: <a href="https://doi.org/10.1063/1.4896698">10.1063/1.4896698</a>.'
  mla: Weich, Tobias. “Equivariant Spectral Asymptotics for<i>h</i>-Pseudodifferential
    Operators.” <i>Journal of Mathematical Physics</i>, vol. 55, no. 10, 101501, AIP
    Publishing, 2014, doi:<a href="https://doi.org/10.1063/1.4896698">10.1063/1.4896698</a>.
  short: T. Weich, Journal of Mathematical Physics 55 (2014).
date_created: 2022-05-17T12:57:00Z
date_updated: 2022-05-19T10:16:38Z
department:
- _id: '10'
- _id: '623'
- _id: '548'
doi: 10.1063/1.4896698
external_id:
  arxiv:
  - '1311.2436 '
intvolume: '        55'
issue: '10'
keyword:
- Mathematical Physics
- Statistical and Nonlinear Physics
language:
- iso: eng
publication: Journal of Mathematical Physics
publication_identifier:
  issn:
  - 0022-2488
  - 1089-7658
publication_status: published
publisher: AIP Publishing
status: public
title: Equivariant spectral asymptotics for<i>h</i>-pseudodifferential operators
type: journal_article
user_id: '49178'
volume: 55
year: '2014'
...
---
_id: '15965'
abstract:
- lang: eng
  text: <jats:title>Abstract</jats:title><jats:p><jats:fig position="anchor"><jats:graphic
    xmlns:xlink="http://www.w3.org/1999/xlink" orientation="portrait" mime-subtype="jpeg"
    mimetype="image" position="float" xlink:type="simple" xlink:href="S0884291414001575_figAb"
    /></jats:fig></jats:p>
author:
- first_name: Stefan
  full_name: Leuders, Stefan
  last_name: Leuders
- first_name: Tobias
  full_name: Lieneke, Tobias
  id: '13956'
  last_name: Lieneke
- first_name: Stefan
  full_name: Lammers, Stefan
  id: '13835'
  last_name: Lammers
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Thomas
  full_name: Niendorf, Thomas
  last_name: Niendorf
citation:
  ama: Leuders S, Lieneke T, Lammers S, Tröster T, Niendorf T. On the fatigue properties
    of metals manufactured by selective laser melting – The role of ductility. <i>Journal
    of Materials Research</i>. Published online 2014:1911-1919. doi:<a href="https://doi.org/10.1557/jmr.2014.157">10.1557/jmr.2014.157</a>
  apa: Leuders, S., Lieneke, T., Lammers, S., Tröster, T., &#38; Niendorf, T. (2014).
    On the fatigue properties of metals manufactured by selective laser melting –
    The role of ductility. <i>Journal of Materials Research</i>, 1911–1919. <a href="https://doi.org/10.1557/jmr.2014.157">https://doi.org/10.1557/jmr.2014.157</a>
  bibtex: '@article{Leuders_Lieneke_Lammers_Tröster_Niendorf_2014, title={On the fatigue
    properties of metals manufactured by selective laser melting – The role of ductility},
    DOI={<a href="https://doi.org/10.1557/jmr.2014.157">10.1557/jmr.2014.157</a>},
    journal={Journal of Materials Research}, author={Leuders, Stefan and Lieneke,
    Tobias and Lammers, Stefan and Tröster, Thomas and Niendorf, Thomas}, year={2014},
    pages={1911–1919} }'
  chicago: Leuders, Stefan, Tobias Lieneke, Stefan Lammers, Thomas Tröster, and Thomas
    Niendorf. “On the Fatigue Properties of Metals Manufactured by Selective Laser
    Melting – The Role of Ductility.” <i>Journal of Materials Research</i>, 2014,
    1911–19. <a href="https://doi.org/10.1557/jmr.2014.157">https://doi.org/10.1557/jmr.2014.157</a>.
  ieee: 'S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the
    fatigue properties of metals manufactured by selective laser melting – The role
    of ductility,” <i>Journal of Materials Research</i>, pp. 1911–1919, 2014, doi:
    <a href="https://doi.org/10.1557/jmr.2014.157">10.1557/jmr.2014.157</a>.'
  mla: Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by
    Selective Laser Melting – The Role of Ductility.” <i>Journal of Materials Research</i>,
    2014, pp. 1911–19, doi:<a href="https://doi.org/10.1557/jmr.2014.157">10.1557/jmr.2014.157</a>.
  short: S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials
    Research (2014) 1911–1919.
date_created: 2020-02-21T14:40:39Z
date_updated: 2024-03-27T15:25:07Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '146'
- _id: '219'
doi: 10.1557/jmr.2014.157
language:
- iso: eng
page: 1911-1919
publication: Journal of Materials Research
publication_identifier:
  issn:
  - 0884-2914
  - 2044-5326
publication_status: published
status: public
title: On the fatigue properties of metals manufactured by selective laser melting
  – The role of ductility
type: journal_article
user_id: '13956'
year: '2014'
...
---
_id: '22186'
abstract:
- lang: eng
  text: 'The reproducibility and reliability of quality aspects are an important challenge
    of the polymer laser sintering process. However, existing quality concepts and
    standardization activities considering influencing factors along the whole process
    chain have not been validated experimentally yet. In this work, these factors
    are analyzed and kept constant to obtain a reliable material data set for different
    layer thicknesses and testing temperatures. In addition, material qualities regarding
    powder ageing effects are analyzed using different build heights and layer thicknesses:
    while an increase of the layer thickness reduces mechanical part strength and
    density, it also results in a less intense thermal ageing of unmolten powder due
    to shorter build times.'
article_number: '185374'
author:
- first_name: Stefan
  full_name: Rüsenberg, Stefan
  last_name: Rüsenberg
- first_name: Stefan
  full_name: Josupeit, Stefan
  last_name: Josupeit
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
  orcid: 000-0001-8590-1921
citation:
  ama: Rüsenberg S, Josupeit S, Schmid H-J. A method to characterize the quality of
    a polymer laser sintering process . <i>Advances in Mechanical Engineering</i>.
    2014;6. doi:<a href="https://doi.org/10.1155/2014/185374">10.1155/2014/185374</a>
  apa: Rüsenberg, S., Josupeit, S., &#38; Schmid, H.-J. (2014). A method to characterize
    the quality of a polymer laser sintering process . <i>Advances in Mechanical Engineering</i>,
    <i>6</i>, Article 185374. <a href="https://doi.org/10.1155/2014/185374">https://doi.org/10.1155/2014/185374</a>
  bibtex: '@article{Rüsenberg_Josupeit_Schmid_2014, title={A method to characterize
    the quality of a polymer laser sintering process }, volume={6}, DOI={<a href="https://doi.org/10.1155/2014/185374">10.1155/2014/185374</a>},
    number={185374}, journal={Advances in Mechanical Engineering}, publisher={SAGE
    Publications}, author={Rüsenberg, Stefan and Josupeit, Stefan and Schmid, Hans-Joachim},
    year={2014} }'
  chicago: Rüsenberg, Stefan, Stefan Josupeit, and Hans-Joachim Schmid. “A Method
    to Characterize the Quality of a Polymer Laser Sintering Process .” <i>Advances
    in Mechanical Engineering</i> 6 (2014). <a href="https://doi.org/10.1155/2014/185374">https://doi.org/10.1155/2014/185374</a>.
  ieee: 'S. Rüsenberg, S. Josupeit, and H.-J. Schmid, “A method to characterize the
    quality of a polymer laser sintering process ,” <i>Advances in Mechanical Engineering</i>,
    vol. 6, Art. no. 185374, 2014, doi: <a href="https://doi.org/10.1155/2014/185374">10.1155/2014/185374</a>.'
  mla: Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer
    Laser Sintering Process .” <i>Advances in Mechanical Engineering</i>, vol. 6,
    185374, SAGE Publications, 2014, doi:<a href="https://doi.org/10.1155/2014/185374">10.1155/2014/185374</a>.
  short: S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering
    6 (2014).
date_created: 2021-05-14T07:46:17Z
date_updated: 2026-02-19T14:21:49Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1155/2014/185374
intvolume: '         6'
language:
- iso: eng
publication: Advances in Mechanical Engineering
publication_identifier:
  issn:
  - 1687-8140
publisher: SAGE Publications
status: public
title: 'A method to characterize the quality of a polymer laser sintering process '
type: journal_article
user_id: '14972'
volume: 6
year: '2014'
...
---
_id: '10036'
author:
- first_name: Rebecca
  full_name: Hölscher, Rebecca
  last_name: Hölscher
- first_name: Wolf Gero
  full_name: Schmidt, Wolf Gero
  id: '468'
  last_name: Schmidt
  orcid: 0000-0002-2717-5076
- first_name: Simone
  full_name: Sanna, Simone
  last_name: Sanna
citation:
  ama: Hölscher R, Schmidt WG, Sanna S. Modeling LiNbO3 Surfaces at Ambient Conditions.
    <i>The Journal of Physical Chemistry C</i>. Published online 2014:10213-10220.
    doi:<a href="https://doi.org/10.1021/jp502936f">10.1021/jp502936f</a>
  apa: Hölscher, R., Schmidt, W. G., &#38; Sanna, S. (2014). Modeling LiNbO3 Surfaces
    at Ambient Conditions. <i>The Journal of Physical Chemistry C</i>, 10213–10220.
    <a href="https://doi.org/10.1021/jp502936f">https://doi.org/10.1021/jp502936f</a>
  bibtex: '@article{Hölscher_Schmidt_Sanna_2014, title={Modeling LiNbO3 Surfaces at
    Ambient Conditions}, DOI={<a href="https://doi.org/10.1021/jp502936f">10.1021/jp502936f</a>},
    journal={The Journal of Physical Chemistry C}, author={Hölscher, Rebecca and Schmidt,
    Wolf Gero and Sanna, Simone}, year={2014}, pages={10213–10220} }'
  chicago: Hölscher, Rebecca, Wolf Gero Schmidt, and Simone Sanna. “Modeling LiNbO3
    Surfaces at Ambient Conditions.” <i>The Journal of Physical Chemistry C</i>, 2014,
    10213–20. <a href="https://doi.org/10.1021/jp502936f">https://doi.org/10.1021/jp502936f</a>.
  ieee: 'R. Hölscher, W. G. Schmidt, and S. Sanna, “Modeling LiNbO3 Surfaces at Ambient
    Conditions,” <i>The Journal of Physical Chemistry C</i>, pp. 10213–10220, 2014,
    doi: <a href="https://doi.org/10.1021/jp502936f">10.1021/jp502936f</a>.'
  mla: Hölscher, Rebecca, et al. “Modeling LiNbO3 Surfaces at Ambient Conditions.”
    <i>The Journal of Physical Chemistry C</i>, 2014, pp. 10213–20, doi:<a href="https://doi.org/10.1021/jp502936f">10.1021/jp502936f</a>.
  short: R. Hölscher, W.G. Schmidt, S. Sanna, The Journal of Physical Chemistry C
    (2014) 10213–10220.
date_created: 2019-05-29T08:56:42Z
date_updated: 2025-12-05T09:57:24Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '35'
- _id: '429'
- _id: '27'
doi: 10.1021/jp502936f
funded_apc: '1'
language:
- iso: eng
page: 10213-10220
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '53'
  name: TRR 142
- _id: '55'
  name: TRR 142 - Project Area B
- _id: '69'
  name: TRR 142 - Subproject B4
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: The Journal of Physical Chemistry C
publication_identifier:
  issn:
  - 1932-7447
  - 1932-7455
publication_status: published
status: public
title: Modeling LiNbO3 Surfaces at Ambient Conditions
type: journal_article
user_id: '16199'
year: '2014'
...
---
_id: '13514'
author:
- first_name: Yanlu
  full_name: Li, Yanlu
  last_name: Li
- first_name: Wolf Gero
  full_name: Schmidt, Wolf Gero
  id: '468'
  last_name: Schmidt
  orcid: 0000-0002-2717-5076
- first_name: S.
  full_name: Sanna, S.
  last_name: Sanna
citation:
  ama: Li Y, Schmidt WG, Sanna S. IntrinsicLiNbO3point defects from hybrid density
    functional calculations. <i>Physical Review B</i>. 2014;89(9). doi:<a href="https://doi.org/10.1103/physrevb.89.094111">10.1103/physrevb.89.094111</a>
  apa: Li, Y., Schmidt, W. G., &#38; Sanna, S. (2014). IntrinsicLiNbO3point defects
    from hybrid density functional calculations. <i>Physical Review B</i>, <i>89</i>(9).
    <a href="https://doi.org/10.1103/physrevb.89.094111">https://doi.org/10.1103/physrevb.89.094111</a>
  bibtex: '@article{Li_Schmidt_Sanna_2014, title={IntrinsicLiNbO3point defects from
    hybrid density functional calculations}, volume={89}, DOI={<a href="https://doi.org/10.1103/physrevb.89.094111">10.1103/physrevb.89.094111</a>},
    number={9}, journal={Physical Review B}, author={Li, Yanlu and Schmidt, Wolf Gero
    and Sanna, S.}, year={2014} }'
  chicago: Li, Yanlu, Wolf Gero Schmidt, and S. Sanna. “IntrinsicLiNbO3point Defects
    from Hybrid Density Functional Calculations.” <i>Physical Review B</i> 89, no.
    9 (2014). <a href="https://doi.org/10.1103/physrevb.89.094111">https://doi.org/10.1103/physrevb.89.094111</a>.
  ieee: 'Y. Li, W. G. Schmidt, and S. Sanna, “IntrinsicLiNbO3point defects from hybrid
    density functional calculations,” <i>Physical Review B</i>, vol. 89, no. 9, 2014,
    doi: <a href="https://doi.org/10.1103/physrevb.89.094111">10.1103/physrevb.89.094111</a>.'
  mla: Li, Yanlu, et al. “IntrinsicLiNbO3point Defects from Hybrid Density Functional
    Calculations.” <i>Physical Review B</i>, vol. 89, no. 9, 2014, doi:<a href="https://doi.org/10.1103/physrevb.89.094111">10.1103/physrevb.89.094111</a>.
  short: Y. Li, W.G. Schmidt, S. Sanna, Physical Review B 89 (2014).
date_created: 2019-09-30T13:38:01Z
date_updated: 2025-12-05T10:32:36Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '35'
- _id: '230'
- _id: '429'
doi: 10.1103/physrevb.89.094111
intvolume: '        89'
issue: '9'
language:
- iso: eng
project:
- _id: '53'
  name: TRR 142
- _id: '55'
  name: TRR 142 - Project Area B
- _id: '66'
  name: TRR 142 - Subproject B1
- _id: '69'
  name: TRR 142 - Subproject B4
- _id: '53'
  name: 'TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten
    zu funktionellen Strukturen'
publication: Physical Review B
publication_identifier:
  issn:
  - 1098-0121
  - 1550-235X
publication_status: published
status: public
title: IntrinsicLiNbO3point defects from hybrid density functional calculations
type: journal_article
user_id: '16199'
volume: 89
year: '2014'
...
---
_id: '13515'
author:
- first_name: S.
  full_name: Sanna, S.
  last_name: Sanna
- first_name: R.
  full_name: Hölscher, R.
  last_name: Hölscher
- first_name: Wolf Gero
  full_name: Schmidt, Wolf Gero
  id: '468'
  last_name: Schmidt
  orcid: 0000-0002-2717-5076
citation:
  ama: 'Sanna S, Hölscher R, Schmidt WG. Temperature dependent LiNbO3(0001): Surface
    reconstruction and surface charge. <i>Applied Surface Science</i>. Published online
    2014:70-78. doi:<a href="https://doi.org/10.1016/j.apsusc.2014.01.104">10.1016/j.apsusc.2014.01.104</a>'
  apa: 'Sanna, S., Hölscher, R., &#38; Schmidt, W. G. (2014). Temperature dependent
    LiNbO3(0001): Surface reconstruction and surface charge. <i>Applied Surface Science</i>,
    70–78. <a href="https://doi.org/10.1016/j.apsusc.2014.01.104">https://doi.org/10.1016/j.apsusc.2014.01.104</a>'
  bibtex: '@article{Sanna_Hölscher_Schmidt_2014, title={Temperature dependent LiNbO3(0001):
    Surface reconstruction and surface charge}, DOI={<a href="https://doi.org/10.1016/j.apsusc.2014.01.104">10.1016/j.apsusc.2014.01.104</a>},
    journal={Applied Surface Science}, author={Sanna, S. and Hölscher, R. and Schmidt,
    Wolf Gero}, year={2014}, pages={70–78} }'
  chicago: 'Sanna, S., R. Hölscher, and Wolf Gero Schmidt. “Temperature Dependent
    LiNbO3(0001): Surface Reconstruction and Surface Charge.” <i>Applied Surface Science</i>,
    2014, 70–78. <a href="https://doi.org/10.1016/j.apsusc.2014.01.104">https://doi.org/10.1016/j.apsusc.2014.01.104</a>.'
  ieee: 'S. Sanna, R. Hölscher, and W. G. Schmidt, “Temperature dependent LiNbO3(0001):
    Surface reconstruction and surface charge,” <i>Applied Surface Science</i>, pp.
    70–78, 2014, doi: <a href="https://doi.org/10.1016/j.apsusc.2014.01.104">10.1016/j.apsusc.2014.01.104</a>.'
  mla: 'Sanna, S., et al. “Temperature Dependent LiNbO3(0001): Surface Reconstruction
    and Surface Charge.” <i>Applied Surface Science</i>, 2014, pp. 70–78, doi:<a href="https://doi.org/10.1016/j.apsusc.2014.01.104">10.1016/j.apsusc.2014.01.104</a>.'
  short: S. Sanna, R. Hölscher, W.G. Schmidt, Applied Surface Science (2014) 70–78.
date_created: 2019-09-30T13:40:10Z
date_updated: 2025-12-05T10:31:53Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '35'
- _id: '230'
- _id: '429'
- _id: '27'
doi: 10.1016/j.apsusc.2014.01.104
language:
- iso: eng
page: 70-78
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
- _id: '53'
  name: TRR 142
- _id: '55'
  name: TRR 142 - Project Area B
- _id: '68'
  name: TRR 142 - Subproject B3
- _id: '69'
  name: TRR 142 - Subproject B4
publication: Applied Surface Science
publication_identifier:
  issn:
  - 0169-4332
publication_status: published
status: public
title: 'Temperature dependent LiNbO3(0001): Surface reconstruction and surface charge'
type: journal_article
user_id: '16199'
year: '2014'
...
---
_id: '28215'
author:
- first_name: Jürgen
  full_name: Gausemeier, Jürgen
  id: '163'
  last_name: Gausemeier
citation:
  ama: Gausemeier J. <i>Vorausschau und Technologieplanung. 9. Symposium für Vorausschau
    und Technologieplanung, Heinz Nixdorf Institut, 5. und 6. Dezember 2013</i>. Vol
    318. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2013.
  apa: Gausemeier, J. (2013). <i>Vorausschau und Technologieplanung. 9. Symposium
    für Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 5. und 6. Dezember
    2013</i> (Vol. 318). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
  bibtex: '@book{Gausemeier_2013, series={Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn}, title={Vorausschau und Technologieplanung. 9. Symposium
    für Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 5. und 6. Dezember
    2013}, volume={318}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, author={Gausemeier, Jürgen}, year={2013}, collection={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Gausemeier, Jürgen. <i>Vorausschau und Technologieplanung. 9. Symposium
    für Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 5. und 6. Dezember
    2013</i>. Vol. 318. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
    Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  ieee: J. Gausemeier, <i>Vorausschau und Technologieplanung. 9. Symposium für Vorausschau
    und Technologieplanung, Heinz Nixdorf Institut, 5. und 6. Dezember 2013</i>, vol.
    318. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  mla: Gausemeier, Jürgen. <i>Vorausschau und Technologieplanung. 9. Symposium für
    Vorausschau und Technologieplanung, Heinz Nixdorf Institut, 5. und 6. Dezember
    2013</i>. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  short: J. Gausemeier, Vorausschau und Technologieplanung. 9. Symposium für Vorausschau
    und Technologieplanung, Heinz Nixdorf Institut, 5. und 6. Dezember 2013, Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn, 2013.
date_created: 2021-12-02T09:33:03Z
date_updated: 2022-01-06T06:57:53Z
department:
- _id: '26'
intvolume: '       318'
language:
- iso: ger
publication_identifier:
  isbn:
  - 978-3-942647-37-3
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Vorausschau und Technologieplanung. 9. Symposium für Vorausschau und Technologieplanung,
  Heinz Nixdorf Institut, 5. und 6. Dezember 2013
type: misc
user_id: '60046'
volume: 318
year: '2013'
...
---
_id: '26202'
author:
- first_name: Felix
  full_name: Reymann, Felix
  last_name: Reymann
citation:
  ama: Reymann F. <i>Verfahren zur Strategieentwicklung und -umsetzung auf Basis einer
    Retropolation von Zukunftsszenarien</i>. Vol 307. Verlagsschriftenreihe des Heinz
    Nixdorf Instituts, Paderborn; 2013.
  apa: Reymann, F. (2013). <i>Verfahren zur Strategieentwicklung und -umsetzung auf
    Basis einer Retropolation von Zukunftsszenarien</i> (Vol. 307). Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn.
  bibtex: '@book{Reymann_2013, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, title={Verfahren zur Strategieentwicklung und -umsetzung auf Basis
    einer Retropolation von Zukunftsszenarien}, volume={307}, publisher={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn}, author={Reymann, Felix}, year={2013},
    collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Reymann, Felix. <i>Verfahren zur Strategieentwicklung und -umsetzung auf
    Basis einer Retropolation von Zukunftsszenarien</i>. Vol. 307. Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn, 2013.
  ieee: F. Reymann, <i>Verfahren zur Strategieentwicklung und -umsetzung auf Basis
    einer Retropolation von Zukunftsszenarien</i>, vol. 307. Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn, 2013.
  mla: Reymann, Felix. <i>Verfahren zur Strategieentwicklung und -umsetzung auf Basis
    einer Retropolation von Zukunftsszenarien</i>. Verlagsschriftenreihe des Heinz
    Nixdorf Instituts, Paderborn, 2013.
  short: F. Reymann, Verfahren zur Strategieentwicklung und -umsetzung auf Basis einer
    Retropolation von Zukunftsszenarien, Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn, 2013.
date_created: 2021-10-15T09:01:25Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
intvolume: '       307'
language:
- iso: ger
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Verfahren zur Strategieentwicklung und -umsetzung auf Basis einer Retropolation
  von Zukunftsszenarien
type: dissertation
user_id: '60046'
volume: 307
year: '2013'
...
---
_id: '26203'
author:
- first_name: Sascha
  full_name: Kahl, Sascha
  last_name: Kahl
citation:
  ama: Kahl S. <i>Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess fortschrittlicher
    mechatronischer Systeme</i>. Vol 308. Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn; 2013.
  apa: Kahl, S. (2013). <i>Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess
    fortschrittlicher mechatronischer Systeme</i> (Vol. 308). Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn.
  bibtex: '@book{Kahl_2013, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, title={Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess
    fortschrittlicher mechatronischer Systeme}, volume={308}, publisher={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn}, author={Kahl, Sascha}, year={2013}, collection={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Kahl, Sascha. <i>Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess
    fortschrittlicher mechatronischer Systeme</i>. Vol. 308. Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn, 2013.
  ieee: S. Kahl, <i>Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess fortschrittlicher
    mechatronischer Systeme</i>, vol. 308. Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn, 2013.
  mla: Kahl, Sascha. <i>Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess
    fortschrittlicher mechatronischer Systeme</i>. Verlagsschriftenreihe des Heinz
    Nixdorf Instituts, Paderborn, 2013.
  short: S. Kahl, Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess fortschrittlicher
    mechatronischer Systeme, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
    2013.
date_created: 2021-10-15T09:02:28Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
intvolume: '       308'
language:
- iso: ger
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Rahmenwerk für einen selbstoptimierenden Entwicklungsprozess fortschrittlicher
  mechatronischer Systeme
type: dissertation
user_id: '60046'
volume: 308
year: '2013'
...
---
_id: '26204'
author:
- first_name: Helene
  full_name: Wassmann, Helene
  last_name: Wassmann
citation:
  ama: Wassmann H. <i>Systematik zur Entwicklung von Visualisierungstechniken für
    die visuelle Analyse fortgeschrittener mechatronischer Systeme in VR-Anwendungen</i>.
    Vol 309. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2013.
  apa: Wassmann, H. (2013). <i>Systematik zur Entwicklung von Visualisierungstechniken
    für die visuelle Analyse fortgeschrittener mechatronischer Systeme in VR-Anwendungen</i>
    (Vol. 309). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
  bibtex: '@book{Wassmann_2013, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, title={Systematik zur Entwicklung von Visualisierungstechniken für
    die visuelle Analyse fortgeschrittener mechatronischer Systeme in VR-Anwendungen},
    volume={309}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn},
    author={Wassmann, Helene}, year={2013}, collection={Verlagsschriftenreihe des
    Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Wassmann, Helene. <i>Systematik zur Entwicklung von Visualisierungstechniken
    für die visuelle Analyse fortgeschrittener mechatronischer Systeme in VR-Anwendungen</i>.
    Vol. 309. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn, 2013.
  ieee: H. Wassmann, <i>Systematik zur Entwicklung von Visualisierungstechniken für
    die visuelle Analyse fortgeschrittener mechatronischer Systeme in VR-Anwendungen</i>,
    vol. 309. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  mla: Wassmann, Helene. <i>Systematik zur Entwicklung von Visualisierungstechniken
    für die visuelle Analyse fortgeschrittener mechatronischer Systeme in VR-Anwendungen</i>.
    Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  short: H. Wassmann, Systematik zur Entwicklung von Visualisierungstechniken für
    die visuelle Analyse fortgeschrittener mechatronischer Systeme in VR-Anwendungen,
    Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
date_created: 2021-10-15T09:03:31Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
intvolume: '       309'
language:
- iso: ger
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Systematik zur Entwicklung von Visualisierungstechniken für die visuelle Analyse
  fortgeschrittener mechatronischer Systeme in VR-Anwendungen
type: dissertation
user_id: '60046'
volume: 309
year: '2013'
...
---
_id: '26205'
author:
- first_name: Tobias
  full_name: Bensiek, Tobias
  last_name: Bensiek
citation:
  ama: Bensiek T. <i>Systematik zur reifegradbasierten Leistungsbewertung und -steigerung
    von Geschäftsprozessen im Mittelstand</i>. Vol 312. Verlagsschriftenreihe des
    Heinz Nixdorf Instituts, Paderborn; 2013.
  apa: Bensiek, T. (2013). <i>Systematik zur reifegradbasierten Leistungsbewertung
    und -steigerung von Geschäftsprozessen im Mittelstand</i> (Vol. 312). Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn.
  bibtex: '@book{Bensiek_2013, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, title={Systematik zur reifegradbasierten Leistungsbewertung und -steigerung
    von Geschäftsprozessen im Mittelstand}, volume={312}, publisher={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn}, author={Bensiek, Tobias}, year={2013},
    collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Bensiek, Tobias. <i>Systematik zur reifegradbasierten Leistungsbewertung
    und -steigerung von Geschäftsprozessen im Mittelstand</i>. Vol. 312. Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn, 2013.
  ieee: T. Bensiek, <i>Systematik zur reifegradbasierten Leistungsbewertung und -steigerung
    von Geschäftsprozessen im Mittelstand</i>, vol. 312. Verlagsschriftenreihe des
    Heinz Nixdorf Instituts, Paderborn, 2013.
  mla: Bensiek, Tobias. <i>Systematik zur reifegradbasierten Leistungsbewertung und
    -steigerung von Geschäftsprozessen im Mittelstand</i>. Verlagsschriftenreihe des
    Heinz Nixdorf Instituts, Paderborn, 2013.
  short: T. Bensiek, Systematik zur reifegradbasierten Leistungsbewertung und -steigerung
    von Geschäftsprozessen im Mittelstand, Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn, 2013.
date_created: 2021-10-15T09:05:27Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
intvolume: '       312'
language:
- iso: ger
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Systematik zur reifegradbasierten Leistungsbewertung und -steigerung von Geschäftsprozessen
  im Mittelstand
type: dissertation
user_id: '60046'
volume: 312
year: '2013'
...
---
_id: '26206'
author:
- first_name: Martin
  full_name: Kokoschka, Martin
  last_name: Kokoschka
citation:
  ama: Kokoschka M. <i>Verfahren zur Konzipierung imitationsgeschützter Produkte und
    Produktionssysteme</i>. Vol 313. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn; 2013.
  apa: Kokoschka, M. (2013). <i>Verfahren zur Konzipierung imitationsgeschützter Produkte
    und Produktionssysteme</i> (Vol. 313). Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn.
  bibtex: '@book{Kokoschka_2013, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, title={Verfahren zur Konzipierung imitationsgeschützter Produkte und
    Produktionssysteme}, volume={313}, publisher={Verlagsschriftenreihe des Heinz
    Nixdorf Instituts, Paderborn}, author={Kokoschka, Martin}, year={2013}, collection={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Kokoschka, Martin. <i>Verfahren zur Konzipierung imitationsgeschützter
    Produkte und Produktionssysteme</i>. Vol. 313. Verlagsschriftenreihe des Heinz
    Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn, 2013.
  ieee: M. Kokoschka, <i>Verfahren zur Konzipierung imitationsgeschützter Produkte
    und Produktionssysteme</i>, vol. 313. Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn, 2013.
  mla: Kokoschka, Martin. <i>Verfahren zur Konzipierung imitationsgeschützter Produkte
    und Produktionssysteme</i>. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn, 2013.
  short: M. Kokoschka, Verfahren zur Konzipierung imitationsgeschützter Produkte und
    Produktionssysteme, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
    2013.
date_created: 2021-10-15T09:06:28Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
intvolume: '       313'
language:
- iso: ger
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Verfahren zur Konzipierung imitationsgeschützter Produkte und Produktionssysteme
type: dissertation
user_id: '60046'
volume: 313
year: '2013'
...
---
_id: '26207'
author:
- first_name: Markus
  full_name: von Detten, Markus
  last_name: von Detten
citation:
  ama: von Detten M. <i>Reengineering of Component-Based Systems in the Presence of
    Design Deficiencies</i>. Vol 314. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn; 2013.
  apa: von Detten, M. (2013). <i>Reengineering of Component-Based Systems in the Presence
    of Design Deficiencies</i> (Vol. 314). Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn.
  bibtex: '@book{von Detten_2013, series={Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn}, title={Reengineering of Component-Based Systems in the
    Presence of Design Deficiencies}, volume={314}, publisher={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn}, author={von Detten, Markus}, year={2013},
    collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Detten, Markus von. <i>Reengineering of Component-Based Systems in the
    Presence of Design Deficiencies</i>. Vol. 314. Verlagsschriftenreihe Des Heinz
    Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn, 2013.
  ieee: M. von Detten, <i>Reengineering of Component-Based Systems in the Presence
    of Design Deficiencies</i>, vol. 314. Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn, 2013.
  mla: von Detten, Markus. <i>Reengineering of Component-Based Systems in the Presence
    of Design Deficiencies</i>. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn, 2013.
  short: M. von Detten, Reengineering of Component-Based Systems in the Presence of
    Design Deficiencies, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
    2013.
date_created: 2021-10-15T09:07:29Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
intvolume: '       314'
language:
- iso: eng
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Reengineering of Component-Based Systems in the Presence of Design Deficiencies
type: book
user_id: '60046'
volume: 314
year: '2013'
...
---
_id: '26208'
citation:
  ama: Dangelmaier W, Laroque C, Klaas A, eds. <i>Simulation in Produktion und Logistik
    2013</i>. Vol 316. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn;
    2013.
  apa: Dangelmaier, W., Laroque, C., &#38; Klaas, A. (Eds.). (2013). <i>Simulation
    in Produktion und Logistik 2013</i> (Vol. 316). Verlagsschriftenreihe des Heinz
    Nixdorf Instituts, Paderborn.
  bibtex: '@book{Dangelmaier_Laroque_Klaas_2013, series={Verlagsschriftenreihe des
    Heinz Nixdorf Instituts, Paderborn}, title={Simulation in Produktion und Logistik
    2013}, volume={316}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, year={2013}, collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn} }'
  chicago: Dangelmaier, Wilhelm, Christoph Laroque, and Alexander Klaas, eds. <i>Simulation
    in Produktion und Logistik 2013</i>. Vol. 316. Verlagsschriftenreihe des Heinz
    Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn, 2013.
  ieee: W. Dangelmaier, C. Laroque, and A. Klaas, Eds., <i>Simulation in Produktion
    und Logistik 2013</i>, vol. 316. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn, 2013.
  mla: Dangelmaier, Wilhelm, et al., editors. <i>Simulation in Produktion und Logistik
    2013</i>. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  short: W. Dangelmaier, C. Laroque, A. Klaas, eds., Simulation in Produktion und
    Logistik 2013, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
date_created: 2021-10-15T09:09:11Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
editor:
- first_name: Wilhelm
  full_name: Dangelmaier, Wilhelm
  last_name: Dangelmaier
- first_name: Christoph
  full_name: Laroque, Christoph
  last_name: Laroque
- first_name: Alexander
  full_name: Klaas, Alexander
  last_name: Klaas
intvolume: '       316'
language:
- iso: ger
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Simulation in Produktion und Logistik 2013
type: conference_editor
user_id: '60046'
volume: 316
year: '2013'
...
---
_id: '26209'
author:
- first_name: Claudia
  full_name: Priesterjahn, Claudia
  last_name: Priesterjahn
citation:
  ama: Priesterjahn C. <i>Analyzing Self-Healing Operations in Mechatronic Systems
    </i>. Vol 317. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2013.
  apa: Priesterjahn, C. (2013). <i>Analyzing Self-healing Operations in Mechatronic
    Systems </i> (Vol. 317). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
  bibtex: '@book{Priesterjahn_2013, series={Verlagsschriftenreihe des Heinz Nixdorf
    Instituts, Paderborn}, title={Analyzing Self-healing Operations in Mechatronic
    Systems }, volume={317}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
    Paderborn}, author={Priesterjahn, Claudia}, year={2013}, collection={Verlagsschriftenreihe
    des Heinz Nixdorf Instituts, Paderborn} }'
  chicago: Priesterjahn, Claudia. <i>Analyzing Self-Healing Operations in Mechatronic
    Systems </i>. Vol. 317. Verlagsschriftenreihe Des Heinz Nixdorf Instituts, Paderborn.
    Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  ieee: C. Priesterjahn, <i>Analyzing Self-healing Operations in Mechatronic Systems
    </i>, vol. 317. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
    2013.
  mla: Priesterjahn, Claudia. <i>Analyzing Self-Healing Operations in Mechatronic
    Systems </i>. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
  short: C. Priesterjahn, Analyzing Self-Healing Operations in Mechatronic Systems
    , Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2013.
date_created: 2021-10-15T09:10:19Z
date_updated: 2022-01-06T06:57:18Z
department:
- _id: '26'
intvolume: '       317'
language:
- iso: eng
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: 'Analyzing Self-healing Operations in Mechatronic Systems '
type: book
user_id: '60046'
volume: 317
year: '2013'
...