---
_id: '20914'
abstract:
- lang: eng
text: This chapter summarizes the application and evaluation of the SPES engineering
methodology in the automotive domain. After introducing the particular domain
characteristics, we state some research questions that we have investigated. Some
of the activities that address these research questions are presented in detail.
We conclude that the SPES engineering methodology is a good basis for the development
of automotive systems, but could be further refined to fit the particular needs
of the domain.
author:
- first_name: Markus
full_name: Fockel, Markus
id: '8472'
last_name: Fockel
orcid: 0000-0002-1269-0702
- first_name: Peter
full_name: Heidl, Peter
last_name: Heidl
- first_name: Jens
full_name: Höfflinger, Jens
last_name: Höfflinger
- first_name: Harald
full_name: Hönninger, Harald
last_name: Hönninger
- first_name: Jörg
full_name: Holtmann, Jörg
id: '3875'
last_name: Holtmann
orcid: 0000-0001-6141-4571
- first_name: Wilfried
full_name: Horn, Wilfried
last_name: Horn
- first_name: Jan
full_name: Meyer, Jan
last_name: Meyer
- first_name: Matthias
full_name: Meyer, Matthias
id: '683'
last_name: Meyer
- first_name: Jörg
full_name: Schäuffele, Jörg
last_name: Schäuffele
citation:
ama: 'Fockel M, Heidl P, Höfflinger J, et al. Application and Evaluation in the
Automotive Domain. In: Model-Based Engineering of Embedded Systems. ; 2012.
doi:10.1007/978-3-642-34614-9_12'
apa: Fockel, M., Heidl, P., Höfflinger, J., Hönninger, H., Holtmann, J., Horn, W.,
Meyer, J., Meyer, M., & Schäuffele, J. (2012). Application and Evaluation
in the Automotive Domain. In Model-Based Engineering of Embedded Systems.
https://doi.org/10.1007/978-3-642-34614-9_12
bibtex: '@inbook{Fockel_Heidl_Höfflinger_Hönninger_Holtmann_Horn_Meyer_Meyer_Schäuffele_2012,
place={Berlin, Heidelberg}, title={Application and Evaluation in the Automotive
Domain}, DOI={10.1007/978-3-642-34614-9_12},
booktitle={Model-Based Engineering of Embedded Systems}, author={Fockel, Markus
and Heidl, Peter and Höfflinger, Jens and Hönninger, Harald and Holtmann, Jörg
and Horn, Wilfried and Meyer, Jan and Meyer, Matthias and Schäuffele, Jörg}, year={2012}
}'
chicago: Fockel, Markus, Peter Heidl, Jens Höfflinger, Harald Hönninger, Jörg Holtmann,
Wilfried Horn, Jan Meyer, Matthias Meyer, and Jörg Schäuffele. “Application and
Evaluation in the Automotive Domain.” In Model-Based Engineering of Embedded
Systems. Berlin, Heidelberg, 2012. https://doi.org/10.1007/978-3-642-34614-9_12.
ieee: M. Fockel et al., “Application and Evaluation in the Automotive Domain,”
in Model-Based Engineering of Embedded Systems, Berlin, Heidelberg, 2012.
mla: Fockel, Markus, et al. “Application and Evaluation in the Automotive Domain.”
Model-Based Engineering of Embedded Systems, 2012, doi:10.1007/978-3-642-34614-9_12.
short: 'M. Fockel, P. Heidl, J. Höfflinger, H. Hönninger, J. Holtmann, W. Horn,
J. Meyer, M. Meyer, J. Schäuffele, in: Model-Based Engineering of Embedded Systems,
Berlin, Heidelberg, 2012.'
date_created: 2021-01-12T14:21:35Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '76'
- _id: '241'
- _id: '662'
doi: 10.1007/978-3-642-34614-9_12
language:
- iso: eng
place: Berlin, Heidelberg
publication: Model-Based Engineering of Embedded Systems
publication_identifier:
isbn:
- '9783642346132'
- '9783642346149'
publication_status: published
status: public
title: Application and Evaluation in the Automotive Domain
type: book_chapter
user_id: '5786'
year: '2012'
...
---
_id: '22174'
abstract:
- lang: eng
text: The quality of laser sintered parts, in this work, manufactured by polymer
laser sintering by using an EOSINT P395 Laser Sintering system, depends on several
steps along the process chain. The first step is the characterization of the powder
quality, whereas the rheological and physical investigations of nylon 12 powder
are shown. By changing some important influencing factors, for example the powder
ratio, the powder ageing and the moisture content, the influence on mechanical
and physical properties, density and porosity, are investigated. The composition
of the used powder is known. The previous process (storage conditions, etc.) as
well as the laser sintering process (regarding energy density, temperature, etc.)
is kept constant for the duration of this work. Regarding the post process in
this work the cooling down phase is investigated as well. With an automatically
blasting system it is possible to keep the post process parameters blasting distance
and blasting time, constant. All of the tests will be performed using dry and
conditioned test specimens. This work is showing the dependence on mechanical,
rheological and physical parameters by varying important influencing factors along
the laser sintering process quality chain.
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: R.
full_name: Weiffen, R.
last_name: Weiffen
- first_name: F.
full_name: Knoop, F.
last_name: Knoop
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Rüsenberg S, Weiffen R, Knoop F, Schmid H-J. Controlling the Quality of Laser
Sintered Parts Along the Process Chain. In: 23rd Annual International Solid
Freeform Fabrication Symposium. Vol 23. ; 2012:1024-1044. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf'
apa: Rüsenberg, S., Weiffen, R., Knoop, F., & Schmid, H.-J. (2012). Controlling
the Quality of Laser Sintered Parts Along the Process Chain. In 23rd Annual
International Solid Freeform Fabrication Symposium (Vol. 23, pp. 1024–1044).
http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
bibtex: '@inproceedings{Rüsenberg_Weiffen_Knoop_Schmid_2012, title={Controlling
the Quality of Laser Sintered Parts Along the Process Chain}, volume={23}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Rüsenberg,
Stefan and Weiffen, R. and Knoop, F. and Schmid, Hans-Joachim}, year={2012}, pages={1024–1044}
}'
chicago: Rüsenberg, Stefan, R. Weiffen, F. Knoop, and Hans-Joachim Schmid. “Controlling
the Quality of Laser Sintered Parts Along the Process Chain.” In 23rd Annual
International Solid Freeform Fabrication Symposium, 23:1024–44, 2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
ieee: S. Rüsenberg, R. Weiffen, F. Knoop, and H.-J. Schmid, “Controlling the Quality
of Laser Sintered Parts Along the Process Chain,” in 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 1024–1044.
mla: Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts
Along the Process Chain.” 23rd Annual International Solid Freeform Fabrication
Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
short: 'S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.'
date_created: 2021-05-14T07:46:03Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
intvolume: ' 23'
language:
- iso: eng
page: 1024-1044
publication: 23rd Annual International Solid Freeform Fabrication Symposium
status: public
title: Controlling the Quality of Laser Sintered Parts Along the Process Chain
type: conference
user_id: '71545'
volume: 23
year: '2012'
...
---
_id: '22204'
abstract:
- lang: eng
text: Material properties of parts from additive manufacturing are influenced by
a huge number of material, operational and job parameters. This work aims to identify
the most important ones and to investigate mechanical properties as depending
on those parameters. Test specimens were produced with standard PA12 powder on
an EOSINT P390 and P395, respectively. The influence of the orientation and placement
of parts in the building chamber were investigated systematically. The mechanical
properties
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Rüsenberg S, Schmid H-J. Mechanical Properties as a Result of multitude of
Parameters. In: The European Forum on Additive Manufacturing. Vol 17. ;
2012. doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf'
apa: Rüsenberg, S., & Schmid, H.-J. (2012). Mechanical Properties as a Result
of multitude of Parameters. In The European Forum on Additive Manufacturing
(Vol. 17). https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
bibtex: '@inproceedings{Rüsenberg_Schmid_2012, title={Mechanical Properties as a
Result of multitude of Parameters}, volume={17}, DOI={https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf},
booktitle={The European Forum on Additive Manufacturing}, author={Rüsenberg, Stefan
and Schmid, Hans-Joachim}, year={2012} }'
chicago: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a
Result of Multitude of Parameters.” In The European Forum on Additive Manufacturing,
Vol. 17, 2012. https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
ieee: S. Rüsenberg and H.-J. Schmid, “Mechanical Properties as a Result of multitude
of Parameters,” in The European Forum on Additive Manufacturing, 2012,
vol. 17.
mla: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result
of Multitude of Parameters.” The European Forum on Additive Manufacturing,
vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
short: 'S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing,
2012.'
date_created: 2021-05-14T07:46:38Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
intvolume: ' 17'
language:
- iso: eng
publication: The European Forum on Additive Manufacturing
status: public
title: Mechanical Properties as a Result of multitude of Parameters
type: conference
user_id: '71545'
volume: 17
year: '2012'
...
---
_id: '22364'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
last_name: Zimmer
citation:
ama: 'Adam G, Zimmer D. Elementbasierte Erarbeitung von Konstruktionsregeln für
additive Fertigung. In: ; 2012.'
apa: Adam, G., & Zimmer, D. (2012). Elementbasierte Erarbeitung von Konstruktionsregeln
für additive Fertigung.
bibtex: '@inproceedings{Adam_Zimmer_2012, title={Elementbasierte Erarbeitung von
Konstruktionsregeln für additive Fertigung}, author={Adam, Guido and Zimmer, Detmar},
year={2012} }'
chicago: Adam, Guido, and Detmar Zimmer. “Elementbasierte Erarbeitung von Konstruktionsregeln
Für Additive Fertigung,” 2012.
ieee: G. Adam and D. Zimmer, “Elementbasierte Erarbeitung von Konstruktionsregeln
für additive Fertigung,” 2012.
mla: Adam, Guido, and Detmar Zimmer. Elementbasierte Erarbeitung von Konstruktionsregeln
Für Additive Fertigung. 2012.
short: 'G. Adam, D. Zimmer, in: 2012.'
date_created: 2021-06-15T11:08:45Z
date_updated: 2022-01-06T06:55:31Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
status: public
title: Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung
type: conference
user_id: '38077'
year: '2012'
...
---
_id: '21680'
abstract:
- lang: eng
text: The costs of additive manufactured parts often seem too high in comparison
to those of traditionally manufactured parts, as the information about major cost
drivers, especially for additive manufactured metal parts, is weak. Therefore,
a lifecycle analysis of additive manufactured parts is needed to understand and
rate the cost drivers that act as the largest contributors to unit costs, and
to provide a focus for future cost reduction activities for the Additive Manufacturing
(AM) technology. A better understanding of the cost structure will help to compare
the AM costs with the opportunity costs of the classical manufacturing technologies
and will make it easier to justify the use of AM manufactured parts. This paper
will present work in progress and methodology based on a sample investigated with
business process analysis / simulation and activity based costing. In addition,
cost drivers associated with metal AM process will be rated.
author:
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: M.
full_name: Moi, M.
last_name: Moi
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Analyzing Product Lifecycle Costs for
a Better Understanding of Cost Drivers in Additve Manufacturing. In: 23rd Annual
International Solid Freeform Fabrication Symposium. Vol 23. ; 2012:177-188.
doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf'
apa: Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2012). Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.
In 23rd Annual International Solid Freeform Fabrication Symposium (Vol.
23, pp. 177–188). http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2012, title={Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing},
volume={23}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2012}, pages={177–188} }'
chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.” In
23rd Annual International Solid Freeform Fabrication Symposium, 23:177–88,
2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in
23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol.
23, pp. 177–188.
mla: Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding
of Cost Drivers in Additve Manufacturing.” 23rd Annual International Solid
Freeform Fabrication Symposium, vol. 23, 2012, pp. 177–88, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, pp. 177–188.'
date_created: 2021-04-21T06:34:46Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
intvolume: ' 23'
language:
- iso: eng
page: 177-188
publication: 23rd Annual International Solid Freeform Fabrication Symposium
publication_identifier:
isbn:
- 1053-2153
status: public
title: Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers
in Additve Manufacturing
type: conference
user_id: '55833'
volume: 23
year: '2012'
...
---
_id: '2171'
author:
- first_name: Sandra
full_name: Gesing, Sandra
last_name: Gesing
- first_name: Sonja
full_name: Herres-Pawlis, Sonja
last_name: Herres-Pawlis
- first_name: Georg
full_name: Birkenheuer, Georg
last_name: Birkenheuer
- first_name: André
full_name: Brinkmann, André
last_name: Brinkmann
- first_name: Richard
full_name: Grunzke, Richard
last_name: Grunzke
- first_name: Peter
full_name: Kacsuk, Peter
last_name: Kacsuk
- first_name: Oliver
full_name: Kohlbacher, Oliver
last_name: Kohlbacher
- first_name: Miklos
full_name: Kozlovszky, Miklos
last_name: Kozlovszky
- first_name: Jens
full_name: Krüger, Jens
last_name: Krüger
- first_name: Ralph
full_name: Müller-Pfefferkorn, Ralph
last_name: Müller-Pfefferkorn
- first_name: Patrick
full_name: Schäfer, Patrick
last_name: Schäfer
- first_name: Thomas
full_name: Steinke, Thomas
last_name: Steinke
citation:
ama: 'Gesing S, Herres-Pawlis S, Birkenheuer G, et al. The MoSGrid Community From
National to International Scale. In: Proc. EGI Community Forum. ; 2012.'
apa: Gesing, S., Herres-Pawlis, S., Birkenheuer, G., Brinkmann, A., Grunzke, R.,
Kacsuk, P., … Steinke, T. (2012). The MoSGrid Community From National to International
Scale. In Proc. EGI Community Forum.
bibtex: '@inproceedings{Gesing_Herres-Pawlis_Birkenheuer_Brinkmann_Grunzke_Kacsuk_Kohlbacher_Kozlovszky_Krüger_Müller-Pfefferkorn_et
al._2012, title={The MoSGrid Community From National to International Scale},
booktitle={Proc. EGI Community Forum}, author={Gesing, Sandra and Herres-Pawlis,
Sonja and Birkenheuer, Georg and Brinkmann, André and Grunzke, Richard and Kacsuk,
Peter and Kohlbacher, Oliver and Kozlovszky, Miklos and Krüger, Jens and Müller-Pfefferkorn,
Ralph and et al.}, year={2012} }'
chicago: Gesing, Sandra, Sonja Herres-Pawlis, Georg Birkenheuer, André Brinkmann,
Richard Grunzke, Peter Kacsuk, Oliver Kohlbacher, et al. “The MoSGrid Community
From National to International Scale.” In Proc. EGI Community Forum, 2012.
ieee: S. Gesing et al., “The MoSGrid Community From National to International
Scale,” in Proc. EGI Community Forum, 2012.
mla: Gesing, Sandra, et al. “The MoSGrid Community From National to International
Scale.” Proc. EGI Community Forum, 2012.
short: 'S. Gesing, S. Herres-Pawlis, G. Birkenheuer, A. Brinkmann, R. Grunzke, P.
Kacsuk, O. Kohlbacher, M. Kozlovszky, J. Krüger, R. Müller-Pfefferkorn, P. Schäfer,
T. Steinke, in: Proc. EGI Community Forum, 2012.'
date_created: 2018-04-03T09:01:19Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '27'
publication: Proc. EGI Community Forum
status: public
title: The MoSGrid Community From National to International Scale
type: conference
user_id: '24135'
year: '2012'
...
---
_id: '2172'
author:
- first_name: Kris
full_name: Thielemans, Kris
last_name: Thielemans
- first_name: Charalampos
full_name: Tsoumpas, Charalampos
last_name: Tsoumpas
- first_name: Sanida
full_name: Mustafovic, Sanida
last_name: Mustafovic
- first_name: Tobias
full_name: Beisel, Tobias
last_name: Beisel
- first_name: Pablo
full_name: Aguiar, Pablo
last_name: Aguiar
- first_name: Nikolaos
full_name: Dikaios, Nikolaos
last_name: Dikaios
- first_name: Matthew
full_name: W Jacobson, Matthew
last_name: W Jacobson
citation:
ama: 'Thielemans K, Tsoumpas C, Mustafovic S, et al. STIR: Software for Tomographic
Image Reconstruction Release 2. Physics in Medicine and Biology. 2012;57(4):867-883.
doi:10.1088/0031-9155/57/4/867'
apa: 'Thielemans, K., Tsoumpas, C., Mustafovic, S., Beisel, T., Aguiar, P., Dikaios,
N., & W Jacobson, M. (2012). STIR: Software for Tomographic Image Reconstruction
Release 2. Physics in Medicine and Biology, 57(4), 867–883. https://doi.org/10.1088/0031-9155/57/4/867'
bibtex: '@article{Thielemans_Tsoumpas_Mustafovic_Beisel_Aguiar_Dikaios_W Jacobson_2012,
title={STIR: Software for Tomographic Image Reconstruction Release 2}, volume={57},
DOI={10.1088/0031-9155/57/4/867},
number={4}, journal={Physics in Medicine and Biology}, publisher={IOP Publishing},
author={Thielemans, Kris and Tsoumpas, Charalampos and Mustafovic, Sanida and
Beisel, Tobias and Aguiar, Pablo and Dikaios, Nikolaos and W Jacobson, Matthew},
year={2012}, pages={867–883} }'
chicago: 'Thielemans, Kris, Charalampos Tsoumpas, Sanida Mustafovic, Tobias Beisel,
Pablo Aguiar, Nikolaos Dikaios, and Matthew W Jacobson. “STIR: Software for Tomographic
Image Reconstruction Release 2.” Physics in Medicine and Biology 57, no.
4 (2012): 867–83. https://doi.org/10.1088/0031-9155/57/4/867.'
ieee: 'K. Thielemans et al., “STIR: Software for Tomographic Image Reconstruction
Release 2,” Physics in Medicine and Biology, vol. 57, no. 4, pp. 867–883,
2012.'
mla: 'Thielemans, Kris, et al. “STIR: Software for Tomographic Image Reconstruction
Release 2.” Physics in Medicine and Biology, vol. 57, no. 4, IOP Publishing,
2012, pp. 867–83, doi:10.1088/0031-9155/57/4/867.'
short: K. Thielemans, C. Tsoumpas, S. Mustafovic, T. Beisel, P. Aguiar, N. Dikaios,
M. W Jacobson, Physics in Medicine and Biology 57 (2012) 867–883.
date_created: 2018-04-03T09:02:27Z
date_updated: 2022-01-06T06:55:12Z
department:
- _id: '27'
- _id: '78'
doi: 10.1088/0031-9155/57/4/867
intvolume: ' 57'
issue: '4'
page: 867-883
publication: Physics in Medicine and Biology
publisher: IOP Publishing
status: public
title: 'STIR: Software for Tomographic Image Reconstruction Release 2'
type: journal_article
user_id: '24135'
volume: 57
year: '2012'
...
---
_id: '2173'
author:
- first_name: Soydan
full_name: Redif, Soydan
last_name: Redif
- first_name: Server
full_name: Kasap, Server
last_name: Kasap
citation:
ama: Redif S, Kasap S. Parallel algorithm for computation of second-order sequential
best rotations. Int Journal of Electronics. 2012;100(12):1646-1651. doi:10.1080/00207217.2012.751343
apa: Redif, S., & Kasap, S. (2012). Parallel algorithm for computation of second-order
sequential best rotations. Int. Journal of Electronics, 100(12),
1646–1651. https://doi.org/10.1080/00207217.2012.751343
bibtex: '@article{Redif_Kasap_2012, title={Parallel algorithm for computation of
second-order sequential best rotations}, volume={100}, DOI={10.1080/00207217.2012.751343},
number={12}, journal={Int. Journal of Electronics}, publisher={Taylor & Francis},
author={Redif, Soydan and Kasap, Server}, year={2012}, pages={1646–1651} }'
chicago: 'Redif, Soydan, and Server Kasap. “Parallel Algorithm for Computation of
Second-Order Sequential Best Rotations.” Int. Journal of Electronics 100,
no. 12 (2012): 1646–51. https://doi.org/10.1080/00207217.2012.751343.'
ieee: S. Redif and S. Kasap, “Parallel algorithm for computation of second-order
sequential best rotations,” Int. Journal of Electronics, vol. 100, no.
12, pp. 1646–1651, 2012.
mla: Redif, Soydan, and Server Kasap. “Parallel Algorithm for Computation of Second-Order
Sequential Best Rotations.” Int. Journal of Electronics, vol. 100, no.
12, Taylor & Francis, 2012, pp. 1646–51, doi:10.1080/00207217.2012.751343.
short: S. Redif, S. Kasap, Int. Journal of Electronics 100 (2012) 1646–1651.
date_created: 2018-04-03T09:05:36Z
date_updated: 2022-01-06T06:55:12Z
department:
- _id: '27'
- _id: '78'
doi: 10.1080/00207217.2012.751343
intvolume: ' 100'
issue: '12'
page: 1646-1651
publication: Int. Journal of Electronics
publisher: Taylor & Francis
status: public
title: Parallel algorithm for computation of second-order sequential best rotations
type: journal_article
user_id: '24135'
volume: 100
year: '2012'
...
---
_id: '2174'
author:
- first_name: Server
full_name: Kasap, Server
last_name: Kasap
- first_name: Khaled
full_name: Benkrid, Khaled
last_name: Benkrid
citation:
ama: Kasap S, Benkrid K. Parallel Processor Design and Implementation for Molecular
Dynamics Simulations on a FPGA Parallel Computer. Journal of Computers.
2012;7(6):1312-1328.
apa: Kasap, S., & Benkrid, K. (2012). Parallel Processor Design and Implementation
for Molecular Dynamics Simulations on a FPGA Parallel Computer. Journal of
Computers, 7(6), 1312–1328.
bibtex: '@article{Kasap_Benkrid_2012, title={Parallel Processor Design and Implementation
for Molecular Dynamics Simulations on a FPGA Parallel Computer}, volume={7}, number={6},
journal={Journal of Computers}, publisher={Academy Publishers}, author={Kasap,
Server and Benkrid, Khaled}, year={2012}, pages={1312–1328} }'
chicago: 'Kasap, Server, and Khaled Benkrid. “Parallel Processor Design and Implementation
for Molecular Dynamics Simulations on a FPGA Parallel Computer.” Journal of
Computers 7, no. 6 (2012): 1312–28.'
ieee: S. Kasap and K. Benkrid, “Parallel Processor Design and Implementation for
Molecular Dynamics Simulations on a FPGA Parallel Computer,” Journal of Computers,
vol. 7, no. 6, pp. 1312–1328, 2012.
mla: Kasap, Server, and Khaled Benkrid. “Parallel Processor Design and Implementation
for Molecular Dynamics Simulations on a FPGA Parallel Computer.” Journal of
Computers, vol. 7, no. 6, Academy Publishers, 2012, pp. 1312–28.
short: S. Kasap, K. Benkrid, Journal of Computers 7 (2012) 1312–1328.
date_created: 2018-04-03T09:08:00Z
date_updated: 2022-01-06T06:55:12Z
department:
- _id: '27'
- _id: '78'
intvolume: ' 7'
issue: '6'
page: 1312-1328
publication: Journal of Computers
publisher: Academy Publishers
status: public
title: Parallel Processor Design and Implementation for Molecular Dynamics Simulations
on a FPGA Parallel Computer
type: journal_article
user_id: '24135'
volume: 7
year: '2012'
...
---
_id: '2176'
author:
- first_name: Sonja
full_name: Herres-Pawlis, Sonja
last_name: Herres-Pawlis
- first_name: Georg
full_name: Birkenheuer, Georg
last_name: Birkenheuer
- first_name: André
full_name: Brinkmann, André
last_name: Brinkmann
- first_name: Sandra
full_name: Gesing, Sandra
last_name: Gesing
- first_name: Richard
full_name: Grunzke, Richard
last_name: Grunzke
- first_name: René
full_name: Jäkel, René
last_name: Jäkel
- first_name: Oliver
full_name: Kohlbacher, Oliver
last_name: Kohlbacher
- first_name: Jens
full_name: Krüger, Jens
last_name: Krüger
- first_name: Ines
full_name: Dos Santos Vieira, Ines
last_name: Dos Santos Vieira
citation:
ama: Herres-Pawlis S, Birkenheuer G, Brinkmann A, et al. Workflow-enhanced conformational
analysis of guanidine zinc complexes via a science gateway. Studies in Health
Technology and Informatics. 2012;175:142-151. doi:10.3233/978-1-61499-054-3-142
apa: Herres-Pawlis, S., Birkenheuer, G., Brinkmann, A., Gesing, S., Grunzke, R.,
Jäkel, R., … Dos Santos Vieira, I. (2012). Workflow-enhanced conformational analysis
of guanidine zinc complexes via a science gateway. Studies in Health Technology
and Informatics, 175, 142–151. https://doi.org/10.3233/978-1-61499-054-3-142
bibtex: '@article{Herres-Pawlis_Birkenheuer_Brinkmann_Gesing_Grunzke_Jäkel_Kohlbacher_Krüger_Dos
Santos Vieira_2012, title={Workflow-enhanced conformational analysis of guanidine
zinc complexes via a science gateway}, volume={175}, DOI={10.3233/978-1-61499-054-3-142},
journal={Studies in Health Technology and Informatics}, publisher={IOP Publishing},
author={Herres-Pawlis, Sonja and Birkenheuer, Georg and Brinkmann, André and Gesing,
Sandra and Grunzke, Richard and Jäkel, René and Kohlbacher, Oliver and Krüger,
Jens and Dos Santos Vieira, Ines}, year={2012}, pages={142–151} }'
chicago: 'Herres-Pawlis, Sonja, Georg Birkenheuer, André Brinkmann, Sandra Gesing,
Richard Grunzke, René Jäkel, Oliver Kohlbacher, Jens Krüger, and Ines Dos Santos
Vieira. “Workflow-Enhanced Conformational Analysis of Guanidine Zinc Complexes
via a Science Gateway.” Studies in Health Technology and Informatics 175
(2012): 142–51. https://doi.org/10.3233/978-1-61499-054-3-142.'
ieee: S. Herres-Pawlis et al., “Workflow-enhanced conformational analysis
of guanidine zinc complexes via a science gateway,” Studies in Health Technology
and Informatics, vol. 175, pp. 142–151, 2012.
mla: Herres-Pawlis, Sonja, et al. “Workflow-Enhanced Conformational Analysis of
Guanidine Zinc Complexes via a Science Gateway.” Studies in Health Technology
and Informatics, vol. 175, IOP Publishing, 2012, pp. 142–51, doi:10.3233/978-1-61499-054-3-142.
short: S. Herres-Pawlis, G. Birkenheuer, A. Brinkmann, S. Gesing, R. Grunzke, R.
Jäkel, O. Kohlbacher, J. Krüger, I. Dos Santos Vieira, Studies in Health Technology
and Informatics 175 (2012) 142–151.
date_created: 2018-04-03T09:12:01Z
date_updated: 2022-01-06T06:55:13Z
department:
- _id: '27'
doi: 10.3233/978-1-61499-054-3-142
intvolume: ' 175'
page: 142-151
publication: Studies in Health Technology and Informatics
publisher: IOP Publishing
status: public
title: Workflow-enhanced conformational analysis of guanidine zinc complexes via a
science gateway
type: journal_article
user_id: '24135'
volume: 175
year: '2012'
...
---
_id: '2178'
author:
- first_name: Sandra
full_name: Gesing, Sandra
last_name: Gesing
- first_name: Sonja
full_name: Herres-Pawlis, Sonja
last_name: Herres-Pawlis
- first_name: Georg
full_name: Birkenheuer, Georg
last_name: Birkenheuer
- first_name: André
full_name: Brinkmann, André
last_name: Brinkmann
- first_name: Richard
full_name: Grunzke, Richard
last_name: Grunzke
- first_name: Peter
full_name: Kacsuk, Peter
last_name: Kacsuk
- first_name: Oliver
full_name: Kohlbacher, Oliver
last_name: Kohlbacher
- first_name: Miklos
full_name: Kozlovszky, Miklos
last_name: Kozlovszky
- first_name: Jens
full_name: Krüger, Jens
last_name: Krüger
- first_name: Ralph
full_name: Müller-Pfefferkorn, Ralph
last_name: Müller-Pfefferkorn
- first_name: Patrick
full_name: Schäfer, Patrick
last_name: Schäfer
- first_name: Thomas
full_name: Steinke, Thomas
last_name: Steinke
citation:
ama: 'Gesing S, Herres-Pawlis S, Birkenheuer G, et al. A Science Gateway Getting
Ready for Serving the International Molecular Simulation Community. In: Proceedings
of Science. Vol PoS(EGICF12-EMITC2)050. ; 2012.'
apa: Gesing, S., Herres-Pawlis, S., Birkenheuer, G., Brinkmann, A., Grunzke, R.,
Kacsuk, P., … Steinke, T. (2012). A Science Gateway Getting Ready for Serving
the International Molecular Simulation Community. In Proceedings of Science
(Vol. PoS(EGICF12-EMITC2)050).
bibtex: '@inproceedings{Gesing_Herres-Pawlis_Birkenheuer_Brinkmann_Grunzke_Kacsuk_Kohlbacher_Kozlovszky_Krüger_Müller-Pfefferkorn_et
al._2012, title={A Science Gateway Getting Ready for Serving the International
Molecular Simulation Community}, volume={PoS(EGICF12-EMITC2)050}, booktitle={Proceedings
of Science}, author={Gesing, Sandra and Herres-Pawlis, Sonja and Birkenheuer,
Georg and Brinkmann, André and Grunzke, Richard and Kacsuk, Peter and Kohlbacher,
Oliver and Kozlovszky, Miklos and Krüger, Jens and Müller-Pfefferkorn, Ralph and
et al.}, year={2012} }'
chicago: Gesing, Sandra, Sonja Herres-Pawlis, Georg Birkenheuer, André Brinkmann,
Richard Grunzke, Peter Kacsuk, Oliver Kohlbacher, et al. “A Science Gateway Getting
Ready for Serving the International Molecular Simulation Community.” In Proceedings
of Science, Vol. PoS(EGICF12-EMITC2)050, 2012.
ieee: S. Gesing et al., “A Science Gateway Getting Ready for Serving the
International Molecular Simulation Community,” in Proceedings of Science,
2012, vol. PoS(EGICF12-EMITC2)050.
mla: Gesing, Sandra, et al. “A Science Gateway Getting Ready for Serving the International
Molecular Simulation Community.” Proceedings of Science, vol. PoS(EGICF12-EMITC2)050,
2012.
short: 'S. Gesing, S. Herres-Pawlis, G. Birkenheuer, A. Brinkmann, R. Grunzke, P.
Kacsuk, O. Kohlbacher, M. Kozlovszky, J. Krüger, R. Müller-Pfefferkorn, P. Schäfer,
T. Steinke, in: Proceedings of Science, 2012.'
date_created: 2018-04-03T09:15:35Z
date_updated: 2022-01-06T06:55:13Z
department:
- _id: '27'
publication: Proceedings of Science
status: public
title: A Science Gateway Getting Ready for Serving the International Molecular Simulation
Community
type: conference
user_id: '24135'
volume: PoS(EGICF12-EMITC2)050
year: '2012'
...
---
_id: '22016'
abstract:
- lang: eng
text: Relating to the direct manufacturing of end-use parts the knowledge about
the effect of the long-term ageing of Fused Deposition Modeling (FDM) parts is
of particular importance. For this, tensile specimens were stored for time periods
of up to 52 weeks in two different conditions and the testing was conducted at
different temperatures within a temperature range of -60°C to +160°C. Further
tests were made after the exposure in multiple media. The parts were built up
with the system “Fortus 400mc” from Stratasys with the material Ultem*9085 in
two different build directions, the strongest direction X (on its side) and the
weakest build direction Z (upright) and with the standard toolpath parameters
of the Insight software version 7.0.
author:
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: E.
full_name: Klemp, E.
last_name: Klemp
citation:
ama: 'Bagsik A, Schöppner V, Klemp E. Long-Term ageing effects on Fused Deposition
Modeling Parts manufactured with ULTEM*9085. In: 23rd Annual International
Solid Freeform Fabrication Symposium. Vol 23. ; 2012:629-640. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf'
apa: Bagsik, A., Schöppner, V., & Klemp, E. (2012). Long-Term ageing effects
on Fused Deposition Modeling Parts manufactured with ULTEM*9085. 23rd Annual
International Solid Freeform Fabrication Symposium, 23, 629–640. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Long-Term ageing effects
on Fused Deposition Modeling Parts manufactured with ULTEM*9085}, volume={23},
DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Bagsik,
A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={629–640} }'
chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Long-Term Ageing Effects on
Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In 23rd Annual
International Solid Freeform Fabrication Symposium, 23:629–40, 2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused
Deposition Modeling Parts manufactured with ULTEM*9085,” in 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 629–640, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.'
mla: Bagsik, A., et al. “Long-Term Ageing Effects on Fused Deposition Modeling Parts
Manufactured with ULTEM*9085.” 23rd Annual International Solid Freeform Fabrication
Symposium, vol. 23, 2012, pp. 629–40, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform
Fabrication Symposium, 2012, pp. 629–640.'
date_created: 2021-05-07T13:22:54Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
intvolume: ' 23'
language:
- iso: eng
page: 629-640
publication: 23rd Annual International Solid Freeform Fabrication Symposium
status: public
title: Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with
ULTEM*9085
type: conference
user_id: '70729'
volume: 23
year: '2012'
...
---
_id: '587'
author:
- first_name: Christian
full_name: Plessl, Christian
id: '16153'
last_name: Plessl
orcid: 0000-0001-5728-9982
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
- first_name: Andreas
full_name: Agne, Andreas
last_name: Agne
- first_name: Markus
full_name: Happe, Markus
last_name: Happe
- first_name: Enno
full_name: Lübbers, Enno
last_name: Lübbers
citation:
ama: Plessl C, Platzner M, Agne A, Happe M, Lübbers E. Programming Models for
Reconfigurable Heterogeneous Multi-Cores. Awareness Magazine; 2012.
apa: Plessl, C., Platzner, M., Agne, A., Happe, M., & Lübbers, E. (2012). Programming
models for reconfigurable heterogeneous multi-cores. Awareness Magazine.
bibtex: '@book{Plessl_Platzner_Agne_Happe_Lübbers_2012, title={Programming models
for reconfigurable heterogeneous multi-cores}, publisher={Awareness Magazine},
author={Plessl, Christian and Platzner, Marco and Agne, Andreas and Happe, Markus
and Lübbers, Enno}, year={2012} }'
chicago: Plessl, Christian, Marco Platzner, Andreas Agne, Markus Happe, and Enno
Lübbers. Programming Models for Reconfigurable Heterogeneous Multi-Cores.
Awareness Magazine, 2012.
ieee: C. Plessl, M. Platzner, A. Agne, M. Happe, and E. Lübbers, Programming
models for reconfigurable heterogeneous multi-cores. Awareness Magazine, 2012.
mla: Plessl, Christian, et al. Programming Models for Reconfigurable Heterogeneous
Multi-Cores. Awareness Magazine, 2012.
short: C. Plessl, M. Platzner, A. Agne, M. Happe, E. Lübbers, Programming Models
for Reconfigurable Heterogeneous Multi-Cores, Awareness Magazine, 2012.
date_created: 2017-10-17T12:42:46Z
date_updated: 2022-01-06T07:02:44Z
ddc:
- '040'
department:
- _id: '27'
- _id: '518'
- _id: '78'
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-15T08:37:02Z
date_updated: 2018-03-15T08:37:02Z
file_id: '1260'
file_name: 587-2012_plessl_awareness_magazine.pdf
file_size: 353057
relation: main_file
success: 1
file_date_updated: 2018-03-15T08:37:02Z
has_accepted_license: '1'
language:
- iso: eng
project:
- _id: '1'
name: SFB 901
- _id: '14'
name: SFB 901 - Subprojekt C2
- _id: '4'
name: SFB 901 - Project Area C
publisher: Awareness Magazine
status: public
title: Programming models for reconfigurable heterogeneous multi-cores
type: misc
user_id: '398'
year: '2012'
...
---
_id: '601'
abstract:
- lang: eng
text: Wir betrachten eine Gruppe von mobilen, autonomen Robotern in einem ebenen
Gel{\"a}nde. Es gibt keine zentrale Steuerung und die Roboter m{\"u}ssen sich
selbst koordinieren. Zentrale Herausforderung dabei ist, dass jeder Roboter nur
seine unmittelbare Nachbarschaft sieht und auch nur mit Robotern in seiner unmittelbaren
Nachbarschaft kommunizieren kann. Daraus ergeben sich viele algorithmische Fragestellungen.
In dieser Arbeit wird untersucht, unter welchen Voraussetzungen die Roboter sich
auf einem Punkt versammeln bzw. eine Linie zwischen zwei festen Stationen bilden
k{\"o}nnen. Daf{\"u}r werden mehrere Roboter-Strategien in verschiedenen Bewegungsmodellen
vorgestellt. Diese Strategien werden auf ihre Effizienz hin untersucht. Es werden
obere und untere Schranken f{\"u}r die ben{\"o}tigte Anzahl Runden und die Bewegungsdistanz
gezeigt. In einigen F{\"a}llen wird außerdem die ben{\"o}tigte Bewegungsdistanz
mit derjenigen Bewegungsdistanz verglichen, die eine optimale globale Strategie
auf der gleichen Instanz ben{\"o}tigen w{\"u}rde. So werden kompetititve Faktoren
hergeleitet.
author:
- first_name: Barbara
full_name: Kempkes, Barbara
last_name: Kempkes
citation:
ama: Kempkes B. Local Strategies for Robot Formation Problems. Vol 302. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn; 2012.
apa: Kempkes, B. (2012). Local strategies for robot formation problems (Vol.
302). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
bibtex: '@book{Kempkes_2012, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn}, title={Local strategies for robot formation problems}, volume={302},
publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Kempkes,
Barbara}, year={2012}, collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn} }'
chicago: Kempkes, Barbara. Local Strategies for Robot Formation Problems.
Vol. 302. Verlagsschriftenreihe Des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2012.
ieee: B. Kempkes, Local strategies for robot formation problems, vol. 302.
Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2012.
mla: Kempkes, Barbara. Local Strategies for Robot Formation Problems. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2012.
short: B. Kempkes, Local Strategies for Robot Formation Problems, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2012.
date_created: 2017-10-17T12:42:49Z
date_updated: 2022-01-06T07:02:50Z
ddc:
- '040'
department:
- _id: '63'
- _id: '26'
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-15T08:16:44Z
date_updated: 2018-03-15T08:16:44Z
file_id: '1252'
file_name: 601-Kempkes-PhD.pdf
file_size: 3805310
relation: main_file
success: 1
file_date_updated: 2018-03-15T08:16:44Z
has_accepted_license: '1'
intvolume: ' 302'
language:
- iso: eng
project:
- _id: '1'
name: SFB 901
- _id: '5'
name: SFB 901 - Subprojekt A1
- _id: '2'
name: SFB 901 - Project Area A
publication_identifier:
isbn:
- 978-3-942647-21-2
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
supervisor:
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
title: Local strategies for robot formation problems
type: dissertation
user_id: '5786'
volume: 302
year: '2012'
...
---
_id: '6250'
author:
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Karsten
full_name: Nebe, Karsten
last_name: Nebe
- first_name: Christian
full_name: Geiger, Christian
last_name: Geiger
- first_name: Florian
full_name: Klompmaker, Florian
last_name: Klompmaker
- first_name: Holger Gerhard
full_name: Fischer, Holger Gerhard
id: '30457'
last_name: Fischer
citation:
ama: Paelke V, Nebe K, Geiger C, Klompmaker F, Fischer HG. Multi-Modal, Multi-Touch
Interaction with Maps in Disaster Management Applications. ISPRS - International
Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences.
2012;XXXIX-B8:55-60. doi:10.5194/isprsarchives-xxxix-b8-55-2012
apa: Paelke, V., Nebe, K., Geiger, C., Klompmaker, F., & Fischer, H. G. (2012).
Multi-Modal, Multi-Touch Interaction with Maps in Disaster Management Applications.
ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial
Information Sciences, XXXIX-B8, 55–60. https://doi.org/10.5194/isprsarchives-xxxix-b8-55-2012
bibtex: '@article{Paelke_Nebe_Geiger_Klompmaker_Fischer_2012, title={Multi-Modal,
Multi-Touch Interaction with Maps in Disaster Management Applications}, volume={XXXIX-B8},
DOI={10.5194/isprsarchives-xxxix-b8-55-2012},
journal={ISPRS - International Archives of the Photogrammetry, Remote Sensing
and Spatial Information Sciences}, publisher={Copernicus GmbH}, author={Paelke,
Volker and Nebe, Karsten and Geiger, Christian and Klompmaker, Florian and Fischer,
Holger Gerhard}, year={2012}, pages={55–60} }'
chicago: 'Paelke, Volker, Karsten Nebe, Christian Geiger, Florian Klompmaker, and
Holger Gerhard Fischer. “Multi-Modal, Multi-Touch Interaction with Maps in Disaster
Management Applications.” ISPRS - International Archives of the Photogrammetry,
Remote Sensing and Spatial Information Sciences XXXIX-B8 (2012): 55–60. https://doi.org/10.5194/isprsarchives-xxxix-b8-55-2012.'
ieee: V. Paelke, K. Nebe, C. Geiger, F. Klompmaker, and H. G. Fischer, “Multi-Modal,
Multi-Touch Interaction with Maps in Disaster Management Applications,” ISPRS
- International Archives of the Photogrammetry, Remote Sensing and Spatial Information
Sciences, vol. XXXIX-B8, pp. 55–60, 2012.
mla: Paelke, Volker, et al. “Multi-Modal, Multi-Touch Interaction with Maps in Disaster
Management Applications.” ISPRS - International Archives of the Photogrammetry,
Remote Sensing and Spatial Information Sciences, vol. XXXIX-B8, Copernicus
GmbH, 2012, pp. 55–60, doi:10.5194/isprsarchives-xxxix-b8-55-2012.
short: V. Paelke, K. Nebe, C. Geiger, F. Klompmaker, H.G. Fischer, ISPRS - International
Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
XXXIX-B8 (2012) 55–60.
date_created: 2018-12-18T10:18:13Z
date_updated: 2022-01-06T07:02:58Z
department:
- _id: '66'
- _id: '534'
- _id: '221'
doi: 10.5194/isprsarchives-xxxix-b8-55-2012
language:
- iso: eng
page: 55-60
publication: ISPRS - International Archives of the Photogrammetry, Remote Sensing
and Spatial Information Sciences
publication_identifier:
issn:
- 1682-1777
publication_status: published
publisher: Copernicus GmbH
status: public
title: Multi-Modal, Multi-Touch Interaction with Maps in Disaster Management Applications
type: journal_article
user_id: '30457'
volume: XXXIX-B8
year: '2012'
...
---
_id: '6285'
author:
- first_name: Volker
full_name: Paelke, Volker
last_name: Paelke
- first_name: Karsten
full_name: Nebe, Karsten
last_name: Nebe
- first_name: Christian
full_name: Geiger, Christian
last_name: Geiger
- first_name: Florian
full_name: Klompmaker, Florian
last_name: Klompmaker
- first_name: Holger Gerhard
full_name: Fischer, Holger Gerhard
id: '30457'
last_name: Fischer
citation:
ama: 'Paelke V, Nebe K, Geiger C, Klompmaker F, Fischer HG. Designing Multi-Modal
Map-Based Interfaces for Disaster Management. In: Proceedings of the 5th International
Conference on Advances in Computer-Human Interaction (ACHI). IARIA; 2012:95-100.'
apa: Paelke, V., Nebe, K., Geiger, C., Klompmaker, F., & Fischer, H. G. (2012).
Designing Multi-Modal Map-Based Interfaces for Disaster Management. In Proceedings
of the 5th International Conference on Advances in Computer-Human Interaction
(ACHI) (pp. 95–100). IARIA.
bibtex: '@inproceedings{Paelke_Nebe_Geiger_Klompmaker_Fischer_2012, title={Designing
Multi-Modal Map-Based Interfaces for Disaster Management}, booktitle={Proceedings
of the 5th International Conference on Advances in Computer-Human Interaction
(ACHI)}, publisher={IARIA}, author={Paelke, Volker and Nebe, Karsten and Geiger,
Christian and Klompmaker, Florian and Fischer, Holger Gerhard}, year={2012}, pages={95–100}
}'
chicago: Paelke, Volker, Karsten Nebe, Christian Geiger, Florian Klompmaker, and
Holger Gerhard Fischer. “Designing Multi-Modal Map-Based Interfaces for Disaster
Management.” In Proceedings of the 5th International Conference on Advances
in Computer-Human Interaction (ACHI), 95–100. IARIA, 2012.
ieee: V. Paelke, K. Nebe, C. Geiger, F. Klompmaker, and H. G. Fischer, “Designing
Multi-Modal Map-Based Interfaces for Disaster Management,” in Proceedings of
the 5th International Conference on Advances in Computer-Human Interaction (ACHI),
2012, pp. 95–100.
mla: Paelke, Volker, et al. “Designing Multi-Modal Map-Based Interfaces for Disaster
Management.” Proceedings of the 5th International Conference on Advances in
Computer-Human Interaction (ACHI), IARIA, 2012, pp. 95–100.
short: 'V. Paelke, K. Nebe, C. Geiger, F. Klompmaker, H.G. Fischer, in: Proceedings
of the 5th International Conference on Advances in Computer-Human Interaction
(ACHI), IARIA, 2012, pp. 95–100.'
date_created: 2018-12-18T12:49:38Z
date_updated: 2022-01-06T07:02:59Z
department:
- _id: '66'
- _id: '534'
- _id: '221'
language:
- iso: eng
page: 95-100
publication: Proceedings of the 5th International Conference on Advances in Computer-Human
Interaction (ACHI)
publisher: IARIA
status: public
title: Designing Multi-Modal Map-Based Interfaces for Disaster Management
type: conference
user_id: '30457'
year: '2012'
...
---
_id: '6286'
author:
- first_name: Florian
full_name: Klompmaker, Florian
last_name: Klompmaker
- first_name: Holger Gerhard
full_name: Fischer, Holger Gerhard
id: '30457'
last_name: Fischer
- first_name: Helge
full_name: Jung, Helge
last_name: Jung
citation:
ama: 'Klompmaker F, Fischer HG, Jung H. Authenticated Tangible Interaction using
RFID and Depth-Sensing Cameras - Supporting Collaboration on Interactive Tabletops.
In: Proceedings of the 5th International Conference on Advances in Computer-Human
Interaction (ACHI). IARIA; 2012:141-144.'
apa: Klompmaker, F., Fischer, H. G., & Jung, H. (2012). Authenticated Tangible
Interaction using RFID and Depth-Sensing Cameras - Supporting Collaboration on
Interactive Tabletops. In Proceedings of the 5th International Conference on
Advances in Computer-Human Interaction (ACHI) (pp. 141–144). IARIA.
bibtex: '@inproceedings{Klompmaker_Fischer_Jung_2012, title={Authenticated Tangible
Interaction using RFID and Depth-Sensing Cameras - Supporting Collaboration on
Interactive Tabletops}, booktitle={Proceedings of the 5th International Conference
on Advances in Computer-Human Interaction (ACHI)}, publisher={IARIA}, author={Klompmaker,
Florian and Fischer, Holger Gerhard and Jung, Helge}, year={2012}, pages={141–144}
}'
chicago: Klompmaker, Florian, Holger Gerhard Fischer, and Helge Jung. “Authenticated
Tangible Interaction Using RFID and Depth-Sensing Cameras - Supporting Collaboration
on Interactive Tabletops.” In Proceedings of the 5th International Conference
on Advances in Computer-Human Interaction (ACHI), 141–44. IARIA, 2012.
ieee: F. Klompmaker, H. G. Fischer, and H. Jung, “Authenticated Tangible Interaction
using RFID and Depth-Sensing Cameras - Supporting Collaboration on Interactive
Tabletops,” in Proceedings of the 5th International Conference on Advances
in Computer-Human Interaction (ACHI), 2012, pp. 141–144.
mla: Klompmaker, Florian, et al. “Authenticated Tangible Interaction Using RFID
and Depth-Sensing Cameras - Supporting Collaboration on Interactive Tabletops.”
Proceedings of the 5th International Conference on Advances in Computer-Human
Interaction (ACHI), IARIA, 2012, pp. 141–44.
short: 'F. Klompmaker, H.G. Fischer, H. Jung, in: Proceedings of the 5th International
Conference on Advances in Computer-Human Interaction (ACHI), IARIA, 2012, pp.
141–144.'
date_created: 2018-12-18T12:50:15Z
date_updated: 2022-01-06T07:02:59Z
department:
- _id: '66'
- _id: '534'
- _id: '221'
language:
- iso: eng
page: 141-144
publication: Proceedings of the 5th International Conference on Advances in Computer-Human
Interaction (ACHI)
publisher: IARIA
status: public
title: Authenticated Tangible Interaction using RFID and Depth-Sensing Cameras - Supporting
Collaboration on Interactive Tabletops
type: conference
user_id: '30457'
year: '2012'
...
---
_id: '6288'
author:
- first_name: Holger Gerhard
full_name: Fischer, Holger Gerhard
id: '30457'
last_name: Fischer
citation:
ama: 'Fischer HG. Integrating usability engineering in the software development
lifecycle based on international standards. In: Proceedings of the 4th ACM
SIGCHI Symposium on Engineering Interactive Computing Systems - EICS ’12.
ACM Press; 2012. doi:10.1145/2305484.2305541'
apa: Fischer, H. G. (2012). Integrating usability engineering in the software development
lifecycle based on international standards. In Proceedings of the 4th ACM SIGCHI
symposium on Engineering interactive computing systems - EICS ’12. ACM Press.
https://doi.org/10.1145/2305484.2305541
bibtex: '@inproceedings{Fischer_2012, title={Integrating usability engineering in
the software development lifecycle based on international standards}, DOI={10.1145/2305484.2305541}, booktitle={Proceedings
of the 4th ACM SIGCHI symposium on Engineering interactive computing systems -
EICS ’12}, publisher={ACM Press}, author={Fischer, Holger Gerhard}, year={2012}
}'
chicago: Fischer, Holger Gerhard. “Integrating Usability Engineering in the Software
Development Lifecycle Based on International Standards.” In Proceedings of
the 4th ACM SIGCHI Symposium on Engineering Interactive Computing Systems - EICS
’12. ACM Press, 2012. https://doi.org/10.1145/2305484.2305541.
ieee: H. G. Fischer, “Integrating usability engineering in the software development
lifecycle based on international standards,” in Proceedings of the 4th ACM
SIGCHI symposium on Engineering interactive computing systems - EICS ’12,
2012.
mla: Fischer, Holger Gerhard. “Integrating Usability Engineering in the Software
Development Lifecycle Based on International Standards.” Proceedings of the
4th ACM SIGCHI Symposium on Engineering Interactive Computing Systems - EICS ’12,
ACM Press, 2012, doi:10.1145/2305484.2305541.
short: 'H.G. Fischer, in: Proceedings of the 4th ACM SIGCHI Symposium on Engineering
Interactive Computing Systems - EICS ’12, ACM Press, 2012.'
date_created: 2018-12-18T12:52:11Z
date_updated: 2022-01-06T07:03:00Z
department:
- _id: '66'
- _id: '534'
- _id: '221'
doi: 10.1145/2305484.2305541
language:
- iso: eng
publication: Proceedings of the 4th ACM SIGCHI symposium on Engineering interactive
computing systems - EICS '12
publication_identifier:
isbn:
- '9781450311687'
publication_status: published
publisher: ACM Press
status: public
title: Integrating usability engineering in the software development lifecycle based
on international standards
type: conference
user_id: '30457'
year: '2012'
...
---
_id: '6290'
author:
- first_name: Holger Gerhard
full_name: Fischer, Holger Gerhard
id: '30457'
last_name: Fischer
- first_name: Florian
full_name: Klompmaker, Florian
last_name: Klompmaker
citation:
ama: 'Fischer HG, Klompmaker F. Enriching Disaster Control Management based on Human-Computer
Design. In: Proceedings of the 9th International Conference on Information
Systems for Crisis Response and Management (ISCRAM). ISCRAM Digital Library;
2012.'
apa: Fischer, H. G., & Klompmaker, F. (2012). Enriching Disaster Control Management
based on Human-Computer Design. In Proceedings of the 9th International Conference
on Information Systems for Crisis Response and Management (ISCRAM). ISCRAM
Digital Library.
bibtex: '@inproceedings{Fischer_Klompmaker_2012, title={Enriching Disaster Control
Management based on Human-Computer Design}, booktitle={Proceedings of the 9th
International Conference on Information Systems for Crisis Response and Management
(ISCRAM)}, publisher={ISCRAM Digital Library}, author={Fischer, Holger Gerhard
and Klompmaker, Florian}, year={2012} }'
chicago: Fischer, Holger Gerhard, and Florian Klompmaker. “Enriching Disaster Control
Management Based on Human-Computer Design.” In Proceedings of the 9th International
Conference on Information Systems for Crisis Response and Management (ISCRAM).
ISCRAM Digital Library, 2012.
ieee: H. G. Fischer and F. Klompmaker, “Enriching Disaster Control Management based
on Human-Computer Design,” in Proceedings of the 9th International Conference
on Information Systems for Crisis Response and Management (ISCRAM), 2012.
mla: Fischer, Holger Gerhard, and Florian Klompmaker. “Enriching Disaster Control
Management Based on Human-Computer Design.” Proceedings of the 9th International
Conference on Information Systems for Crisis Response and Management (ISCRAM),
ISCRAM Digital Library, 2012.
short: 'H.G. Fischer, F. Klompmaker, in: Proceedings of the 9th International Conference
on Information Systems for Crisis Response and Management (ISCRAM), ISCRAM Digital
Library, 2012.'
date_created: 2018-12-18T12:52:45Z
date_updated: 2022-01-06T07:03:00Z
department:
- _id: '66'
- _id: '534'
- _id: '221'
language:
- iso: eng
publication: Proceedings of the 9th International Conference on Information Systems
for Crisis Response and Management (ISCRAM)
publisher: ISCRAM Digital Library
status: public
title: Enriching Disaster Control Management based on Human-Computer Design
type: conference
user_id: '30457'
year: '2012'
...
---
_id: '6291'
author:
- first_name: Holger Gerhard
full_name: Fischer, Holger Gerhard
id: '30457'
last_name: Fischer
- first_name: Thomas
full_name: Geis, Thomas
last_name: Geis
- first_name: Oliver
full_name: Kluge, Oliver
last_name: Kluge
- first_name: Christian
full_name: Bogner, Christian
last_name: Bogner
- first_name: Knut
full_name: Polkehn, Knut
last_name: Polkehn
citation:
ama: 'Fischer HG, Geis T, Kluge O, Bogner C, Polkehn K. Der Qualitätsstandard für
Usability Engineering der German UPA – Aktueller Stand der Arbeiten. In: Jahresband
Usability Professionals. German UPA; 2012:160-165.'
apa: Fischer, H. G., Geis, T., Kluge, O., Bogner, C., & Polkehn, K. (2012).
Der Qualitätsstandard für Usability Engineering der German UPA – Aktueller Stand
der Arbeiten. In Jahresband Usability Professionals (pp. 160–165). German
UPA.
bibtex: '@inproceedings{Fischer_Geis_Kluge_Bogner_Polkehn_2012, title={Der Qualitätsstandard
für Usability Engineering der German UPA – Aktueller Stand der Arbeiten}, booktitle={Jahresband
Usability Professionals}, publisher={German UPA}, author={Fischer, Holger Gerhard
and Geis, Thomas and Kluge, Oliver and Bogner, Christian and Polkehn, Knut}, year={2012},
pages={160–165} }'
chicago: Fischer, Holger Gerhard, Thomas Geis, Oliver Kluge, Christian Bogner, and
Knut Polkehn. “Der Qualitätsstandard Für Usability Engineering Der German UPA
– Aktueller Stand Der Arbeiten.” In Jahresband Usability Professionals,
160–65. German UPA, 2012.
ieee: H. G. Fischer, T. Geis, O. Kluge, C. Bogner, and K. Polkehn, “Der Qualitätsstandard
für Usability Engineering der German UPA – Aktueller Stand der Arbeiten,” in Jahresband
Usability Professionals, 2012, pp. 160–165.
mla: Fischer, Holger Gerhard, et al. “Der Qualitätsstandard Für Usability Engineering
Der German UPA – Aktueller Stand Der Arbeiten.” Jahresband Usability Professionals,
German UPA, 2012, pp. 160–65.
short: 'H.G. Fischer, T. Geis, O. Kluge, C. Bogner, K. Polkehn, in: Jahresband Usability
Professionals, German UPA, 2012, pp. 160–165.'
date_created: 2018-12-18T12:53:45Z
date_updated: 2022-01-06T07:03:00Z
department:
- _id: '66'
- _id: '534'
- _id: '221'
language:
- iso: eng
page: 160-165
publication: Jahresband Usability Professionals
publisher: German UPA
status: public
title: Der Qualitätsstandard für Usability Engineering der German UPA – Aktueller
Stand der Arbeiten
type: conference
user_id: '30457'
year: '2012'
...