---
_id: '4131'
abstract:
- lang: eng
  text: "We report an anisotropic formation of defects in cubic GaN grown on nano-patterned
    3C-SiC/Si (001) by molecular\r\nbeam epitaxy. Nano-patterning of 3C-SiC/Si (001)
    is achieved by nanosphere lithography and a reactive\r\nion etching process. Atomic
    force microscopy and scanning electron microscopy show that the selectivearea-\r\ngrown
    cubic GaN nucleates in two structurally different domains, which most probably
    originate from the\r\nsubstrate. In adjacent domains the formation of defects,
    especially hexagonal inclusions, is different and leads to\r\ntwo different surface
    morphologies. The dominant phase within these domains was measured by electron
    backscatter\r\ndiffraction. Optical properties were investigated by micro-photoluminescence
    and cathodoluminescence spectroscopy."
article_type: original
author:
- first_name: R. M.
  full_name: Kemper, R. M.
  last_name: Kemper
- first_name: M.
  full_name: Häberlen, M.
  last_name: Häberlen
- first_name: T.
  full_name: Schupp, T.
  last_name: Schupp
- first_name: M.
  full_name: Weinl, M.
  last_name: Weinl
- first_name: M.
  full_name: Bürger, M.
  last_name: Bürger
- first_name: M.
  full_name: Ruth, M.
  last_name: Ruth
- first_name: Cedrik
  full_name: Meier, Cedrik
  id: '20798'
  last_name: Meier
  orcid: https://orcid.org/0000-0002-3787-3572
- first_name: T.
  full_name: Niendorf, T.
  last_name: Niendorf
- first_name: H. J.
  full_name: Maier, H. J.
  last_name: Maier
- first_name: K.
  full_name: Lischka, K.
  last_name: Lischka
- first_name: D. J.
  full_name: As, D. J.
  last_name: As
- first_name: Jörg
  full_name: Lindner, Jörg
  last_name: Lindner
citation:
  ama: Kemper RM, Häberlen M, Schupp T, et al. Formation of defects in cubic GaN grown
    on nano-patterned 3C-SiC (001). <i>physica status solidi (c)</i>. 2012;9(3-4):1028-1031.
    doi:<a href="https://doi.org/10.1002/pssc.201100174">10.1002/pssc.201100174</a>
  apa: Kemper, R. M., Häberlen, M., Schupp, T., Weinl, M., Bürger, M., Ruth, M., …
    Lindner, J. (2012). Formation of defects in cubic GaN grown on nano-patterned
    3C-SiC (001). <i>Physica Status Solidi (C)</i>, <i>9</i>(3–4), 1028–1031. <a href="https://doi.org/10.1002/pssc.201100174">https://doi.org/10.1002/pssc.201100174</a>
  bibtex: '@article{Kemper_Häberlen_Schupp_Weinl_Bürger_Ruth_Meier_Niendorf_Maier_Lischka_et
    al._2012, title={Formation of defects in cubic GaN grown on nano-patterned 3C-SiC
    (001)}, volume={9}, DOI={<a href="https://doi.org/10.1002/pssc.201100174">10.1002/pssc.201100174</a>},
    number={3–4}, journal={physica status solidi (c)}, publisher={Wiley}, author={Kemper,
    R. M. and Häberlen, M. and Schupp, T. and Weinl, M. and Bürger, M. and Ruth, M.
    and Meier, Cedrik and Niendorf, T. and Maier, H. J. and Lischka, K. and et al.},
    year={2012}, pages={1028–1031} }'
  chicago: 'Kemper, R. M., M. Häberlen, T. Schupp, M. Weinl, M. Bürger, M. Ruth, Cedrik
    Meier, et al. “Formation of Defects in Cubic GaN Grown on Nano-Patterned 3C-SiC
    (001).” <i>Physica Status Solidi (C)</i> 9, no. 3–4 (2012): 1028–31. <a href="https://doi.org/10.1002/pssc.201100174">https://doi.org/10.1002/pssc.201100174</a>.'
  ieee: R. M. Kemper <i>et al.</i>, “Formation of defects in cubic GaN grown on nano-patterned
    3C-SiC (001),” <i>physica status solidi (c)</i>, vol. 9, no. 3–4, pp. 1028–1031,
    2012.
  mla: Kemper, R. M., et al. “Formation of Defects in Cubic GaN Grown on Nano-Patterned
    3C-SiC (001).” <i>Physica Status Solidi (C)</i>, vol. 9, no. 3–4, Wiley, 2012,
    pp. 1028–31, doi:<a href="https://doi.org/10.1002/pssc.201100174">10.1002/pssc.201100174</a>.
  short: R.M. Kemper, M. Häberlen, T. Schupp, M. Weinl, M. Bürger, M. Ruth, C. Meier,
    T. Niendorf, H.J. Maier, K. Lischka, D.J. As, J. Lindner, Physica Status Solidi
    (C) 9 (2012) 1028–1031.
date_created: 2018-08-27T11:31:07Z
date_updated: 2022-01-06T07:00:23Z
ddc:
- '530'
department:
- _id: '286'
- _id: '287'
- _id: '15'
- _id: '230'
- _id: '35'
doi: 10.1002/pssc.201100174
file:
- access_level: closed
  content_type: application/pdf
  creator: hclaudia
  date_created: 2018-08-27T11:35:10Z
  date_updated: 2018-08-27T11:35:10Z
  file_id: '4132'
  file_name: Formation of defects in cubic GaN grown on nano-patterned 3C-SiC 001.pdf
  file_size: 848414
  relation: main_file
  success: 1
file_date_updated: 2018-08-27T11:35:10Z
has_accepted_license: '1'
intvolume: '         9'
issue: 3-4
language:
- iso: eng
page: 1028-1031
publication: physica status solidi (c)
publication_identifier:
  issn:
  - 1862-6351
publication_status: published
publisher: Wiley
status: public
title: Formation of defects in cubic GaN grown on nano-patterned 3C-SiC (001)
type: journal_article
user_id: '20798'
volume: 9
year: '2012'
...
---
_id: '4380'
abstract:
- lang: eng
  text: The structural and vibrational properties of lithium niobate (LN) – lithium
    tantalate (LT) mixed crystals (LNT, LiNb1-xTaxO3) are investigated over the whole
    composition range by first-principles simulations. The crystal volume grows roughly
    linearly from LT to LN, whereby the lattice parameters a and c show minor deviations
    from the Vegard behavior between the end compounds, LiNbO3 and LiTaO3. Our calculations
    in the framework of the density functional theory show the TO1, TO2 and TO4-modes
    to become harder with increasing Nb concentration. TO3 becomes softer with increasing
    Nb content, instead. The frequency shifts of the zone center A1-TO phonon modes
    for crystals with different compositions are found to be as large as 30 cm-1.
    Raman spectroscopy, which is sensitive to the A1 modes, can be therefore employed
    to determine the crystal composition.
author:
- first_name: Simone
  full_name: Sanna, Simone
  last_name: Sanna
- first_name: Arthur
  full_name: Riefer, Arthur
  last_name: Riefer
- first_name: Sergej
  full_name: Neufeld, Sergej
  last_name: Neufeld
- first_name: Wolf Gero
  full_name: Schmidt, Wolf Gero
  last_name: Schmidt
- first_name: Gerhard
  full_name: Berth, Gerhard
  id: '53'
  last_name: Berth
- first_name: Alex
  full_name: Widhalm, Alex
  last_name: Widhalm
- first_name: Artur
  full_name: Zrenner, Artur
  id: '606'
  last_name: Zrenner
  orcid: 0000-0002-5190-0944
citation:
  ama: 'Sanna S, Riefer A, Neufeld S, et al. Vibrational fingerprints of LiNbO3-LiTaO3
    mixed crystals. In: <i>Proceedings of ISAF-ECAPD-PFM 2012</i>. ; 2012.'
  apa: Sanna, S., Riefer, A., Neufeld, S., Schmidt, W. G., Berth, G., Widhalm, A.,
    &#38; Zrenner, A. (2012). Vibrational fingerprints of LiNbO3-LiTaO3 mixed crystals.
    In <i>Proceedings of ISAF-ECAPD-PFM 2012</i>. Aveiro, Portugal.
  bibtex: '@inproceedings{Sanna_Riefer_Neufeld_Schmidt_Berth_Widhalm_Zrenner_2012,
    title={Vibrational fingerprints of LiNbO3-LiTaO3 mixed crystals}, booktitle={Proceedings
    of ISAF-ECAPD-PFM 2012}, author={Sanna, Simone and Riefer, Arthur and Neufeld,
    Sergej and Schmidt, Wolf Gero and Berth, Gerhard and Widhalm, Alex and Zrenner,
    Artur}, year={2012} }'
  chicago: Sanna, Simone, Arthur Riefer, Sergej Neufeld, Wolf Gero Schmidt, Gerhard
    Berth, Alex Widhalm, and Artur Zrenner. “Vibrational Fingerprints of LiNbO3-LiTaO3
    Mixed Crystals.” In <i>Proceedings of ISAF-ECAPD-PFM 2012</i>, 2012.
  ieee: S. Sanna <i>et al.</i>, “Vibrational fingerprints of LiNbO3-LiTaO3 mixed crystals,”
    in <i>Proceedings of ISAF-ECAPD-PFM 2012</i>, Aveiro, Portugal, 2012.
  mla: Sanna, Simone, et al. “Vibrational Fingerprints of LiNbO3-LiTaO3 Mixed Crystals.”
    <i>Proceedings of ISAF-ECAPD-PFM 2012</i>, 2012.
  short: 'S. Sanna, A. Riefer, S. Neufeld, W.G. Schmidt, G. Berth, A. Widhalm, A.
    Zrenner, in: Proceedings of ISAF-ECAPD-PFM 2012, 2012.'
conference:
  end_date: 2012-07-13
  location: Aveiro, Portugal
  name: 2012 INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS HELD JOINTLY
    WITH 11TH IEEE ECAPD AND IEEE PFM (ISAF/ECAPD/PFM)
  start_date: 2012-07-09
date_created: 2018-09-12T14:32:09Z
date_updated: 2022-01-06T07:01:00Z
department:
- _id: '15'
- _id: '230'
- _id: '35'
keyword:
- Ferroelectrics
- Vibrational properties
- LiNbO3
- LiTaO3
- Mixed Crystals
publication: Proceedings of ISAF-ECAPD-PFM 2012
status: public
title: Vibrational fingerprints of LiNbO3-LiTaO3 mixed crystals
type: conference
user_id: '49428'
year: '2012'
...
---
_id: '4381'
abstract:
- lang: eng
  text: Coherent physics and applications of exciton qubits in electric fi eld tunable
    quantum dot structures are our focus. Excitations with picosecond (ps) laser pulses
    result in qubit rotations. Using state projection by tunnelling the readout can
    be performed in quantitative way. As a function of electric fi eld induced detuning
    Ramsey fringes of a single exciton qubit can be observed and controlled for double
    pulse excitation. Therefore it is possible to demonstrate voltage controlled qubit
    manipulations within a wide range of pulse delays. Using fast electric signals,
    phase-locked to ps-laser pulses, the coherent control of an exciton qubit can
    be obtained by electric interaction. Such voltage controlled qubit manipulations
    seem to be essential for new types of optoelectronic quantum gates and novel applications
    in the fi eld of coherent optoelectronics.
author:
- first_name: Steffen
  full_name: Michaelis de Vasconcellos, Steffen
  last_name: Michaelis de Vasconcellos
- first_name: Simon
  full_name: Gordon, Simon
  last_name: Gordon
- first_name: Dirk
  full_name: Mantei, Dirk
  last_name: Mantei
- first_name: Yves Alexander
  full_name: Leier, Yves Alexander
  last_name: Leier
- first_name: M.
  full_name: Al-Hmoud, M.
  last_name: Al-Hmoud
- first_name: Wadim
  full_name: Quiring, Wadim
  last_name: Quiring
- first_name: Artur
  full_name: Zrenner, Artur
  id: '606'
  last_name: Zrenner
  orcid: 0000-0002-5190-0944
citation:
  ama: 'Michaelis de Vasconcellos S, Gordon S, Mantei D, et al. Coherent optoelectronics
    with quantum dots. In: Jahnke F, ed. <i>QUANTUM OPTICS WITH SEMICONDUCTOR NANOSTRUCTURES</i>.
    Woodhead Publishing; 2012:528-559.'
  apa: Michaelis de Vasconcellos, S., Gordon, S., Mantei, D., Leier, Y. A., Al-Hmoud,
    M., Quiring, W., &#38; Zrenner, A. (2012). Coherent optoelectronics with quantum
    dots. In F. Jahnke (Ed.), <i>QUANTUM OPTICS WITH SEMICONDUCTOR NANOSTRUCTURES</i>
    (pp. 528–559). Woodhead Publishing.
  bibtex: '@inbook{Michaelis de Vasconcellos_Gordon_Mantei_Leier_Al-Hmoud_Quiring_Zrenner_2012,
    title={Coherent optoelectronics with quantum dots}, booktitle={QUANTUM OPTICS
    WITH SEMICONDUCTOR NANOSTRUCTURES}, publisher={Woodhead Publishing}, author={Michaelis
    de Vasconcellos, Steffen and Gordon, Simon and Mantei, Dirk and Leier, Yves Alexander
    and Al-Hmoud, M. and Quiring, Wadim and Zrenner, Artur}, editor={Jahnke, FrankEditor},
    year={2012}, pages={528–559} }'
  chicago: Michaelis de Vasconcellos, Steffen, Simon Gordon, Dirk Mantei, Yves Alexander
    Leier, M. Al-Hmoud, Wadim Quiring, and Artur Zrenner. “Coherent Optoelectronics
    with Quantum Dots.” In <i>QUANTUM OPTICS WITH SEMICONDUCTOR NANOSTRUCTURES</i>,
    edited by Frank Jahnke, 528–59. Woodhead Publishing, 2012.
  ieee: S. Michaelis de Vasconcellos <i>et al.</i>, “Coherent optoelectronics with
    quantum dots,” in <i>QUANTUM OPTICS WITH SEMICONDUCTOR NANOSTRUCTURES</i>, F.
    Jahnke, Ed. Woodhead Publishing, 2012, pp. 528–559.
  mla: Michaelis de Vasconcellos, Steffen, et al. “Coherent Optoelectronics with Quantum
    Dots.” <i>QUANTUM OPTICS WITH SEMICONDUCTOR NANOSTRUCTURES</i>, edited by Frank
    Jahnke, Woodhead Publishing, 2012, pp. 528–59.
  short: 'S. Michaelis de Vasconcellos, S. Gordon, D. Mantei, Y.A. Leier, M. Al-Hmoud,
    W. Quiring, A. Zrenner, in: F. Jahnke (Ed.), QUANTUM OPTICS WITH SEMICONDUCTOR
    NANOSTRUCTURES, Woodhead Publishing, 2012, pp. 528–559.'
date_created: 2018-09-13T06:43:40Z
date_updated: 2022-01-06T07:01:00Z
department:
- _id: '15'
- _id: '230'
- _id: '35'
editor:
- first_name: Frank
  full_name: Jahnke, Frank
  last_name: Jahnke
keyword:
- excitons
- quantum bits
- coherent manipulation
- Ramsey interference
- quantum gate
language:
- iso: eng
page: 528-559
publication: QUANTUM OPTICS WITH SEMICONDUCTOR NANOSTRUCTURES
publication_identifier:
  isbn:
  - 9780857092328 0857092324
publication_status: published
publisher: Woodhead Publishing
status: public
title: Coherent optoelectronics with quantum dots
type: book_chapter
user_id: '49428'
year: '2012'
...
---
_id: '1711'
author:
- first_name: Lingling
  full_name: Huang, Lingling
  last_name: Huang
- first_name: Xianzhong
  full_name: Chen, Xianzhong
  last_name: Chen
- first_name: Holger
  full_name: Mühlenbernd, Holger
  last_name: Mühlenbernd
- first_name: Guixin
  full_name: Li, Guixin
  last_name: Li
- first_name: Benfeng
  full_name: Bai, Benfeng
  last_name: Bai
- first_name: Qiaofeng
  full_name: Tan, Qiaofeng
  last_name: Tan
- first_name: Guofan
  full_name: Jin, Guofan
  last_name: Jin
- first_name: Thomas
  full_name: Zentgraf, Thomas
  id: '30525'
  last_name: Zentgraf
  orcid: 0000-0002-8662-1101
- first_name: Shuang
  full_name: Zhang, Shuang
  last_name: Zhang
citation:
  ama: Huang L, Chen X, Mühlenbernd H, et al. Dispersionless Phase Discontinuities
    for Controlling Light Propagation. <i>Nano Letters</i>. 2012;12(11):5750-5755.
    doi:<a href="https://doi.org/10.1021/nl303031j">10.1021/nl303031j</a>
  apa: Huang, L., Chen, X., Mühlenbernd, H., Li, G., Bai, B., Tan, Q., … Zhang, S.
    (2012). Dispersionless Phase Discontinuities for Controlling Light Propagation.
    <i>Nano Letters</i>, <i>12</i>(11), 5750–5755. <a href="https://doi.org/10.1021/nl303031j">https://doi.org/10.1021/nl303031j</a>
  bibtex: '@article{Huang_Chen_Mühlenbernd_Li_Bai_Tan_Jin_Zentgraf_Zhang_2012, title={Dispersionless
    Phase Discontinuities for Controlling Light Propagation}, volume={12}, DOI={<a
    href="https://doi.org/10.1021/nl303031j">10.1021/nl303031j</a>}, number={11},
    journal={Nano Letters}, publisher={American Chemical Society (ACS)}, author={Huang,
    Lingling and Chen, Xianzhong and Mühlenbernd, Holger and Li, Guixin and Bai, Benfeng
    and Tan, Qiaofeng and Jin, Guofan and Zentgraf, Thomas and Zhang, Shuang}, year={2012},
    pages={5750–5755} }'
  chicago: 'Huang, Lingling, Xianzhong Chen, Holger Mühlenbernd, Guixin Li, Benfeng
    Bai, Qiaofeng Tan, Guofan Jin, Thomas Zentgraf, and Shuang Zhang. “Dispersionless
    Phase Discontinuities for Controlling Light Propagation.” <i>Nano Letters</i>
    12, no. 11 (2012): 5750–55. <a href="https://doi.org/10.1021/nl303031j">https://doi.org/10.1021/nl303031j</a>.'
  ieee: L. Huang <i>et al.</i>, “Dispersionless Phase Discontinuities for Controlling
    Light Propagation,” <i>Nano Letters</i>, vol. 12, no. 11, pp. 5750–5755, 2012.
  mla: Huang, Lingling, et al. “Dispersionless Phase Discontinuities for Controlling
    Light Propagation.” <i>Nano Letters</i>, vol. 12, no. 11, American Chemical Society
    (ACS), 2012, pp. 5750–55, doi:<a href="https://doi.org/10.1021/nl303031j">10.1021/nl303031j</a>.
  short: L. Huang, X. Chen, H. Mühlenbernd, G. Li, B. Bai, Q. Tan, G. Jin, T. Zentgraf,
    S. Zhang, Nano Letters 12 (2012) 5750–5755.
date_created: 2018-03-22T18:46:27Z
date_updated: 2022-01-06T06:53:05Z
department:
- _id: '15'
- _id: '230'
doi: 10.1021/nl303031j
intvolume: '        12'
issue: '11'
page: 5750-5755
publication: Nano Letters
publication_identifier:
  issn:
  - 1530-6984
  - 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Dispersionless Phase Discontinuities for Controlling Light Propagation
type: journal_article
user_id: '30525'
volume: 12
year: '2012'
...
---
_id: '1712'
author:
- first_name: Ziliang
  full_name: Ye, Ziliang
  last_name: Ye
- first_name: Shuang
  full_name: Zhang, Shuang
  last_name: Zhang
- first_name: Yuan
  full_name: Wang, Yuan
  last_name: Wang
- first_name: Yong-Shik
  full_name: Park, Yong-Shik
  last_name: Park
- first_name: Thomas
  full_name: Zentgraf, Thomas
  id: '30525'
  last_name: Zentgraf
  orcid: 0000-0002-8662-1101
- first_name: Guy
  full_name: Bartal, Guy
  last_name: Bartal
- first_name: Xiaobo
  full_name: Yin, Xiaobo
  last_name: Yin
- first_name: Xiang
  full_name: Zhang, Xiang
  last_name: Zhang
citation:
  ama: Ye Z, Zhang S, Wang Y, et al. Mapping the near-field dynamics in plasmon-induced
    transparency. <i>Physical Review B</i>. 2012;86(15). doi:<a href="https://doi.org/10.1103/physrevb.86.155148">10.1103/physrevb.86.155148</a>
  apa: Ye, Z., Zhang, S., Wang, Y., Park, Y.-S., Zentgraf, T., Bartal, G., … Zhang,
    X. (2012). Mapping the near-field dynamics in plasmon-induced transparency. <i>Physical
    Review B</i>, <i>86</i>(15). <a href="https://doi.org/10.1103/physrevb.86.155148">https://doi.org/10.1103/physrevb.86.155148</a>
  bibtex: '@article{Ye_Zhang_Wang_Park_Zentgraf_Bartal_Yin_Zhang_2012, title={Mapping
    the near-field dynamics in plasmon-induced transparency}, volume={86}, DOI={<a
    href="https://doi.org/10.1103/physrevb.86.155148">10.1103/physrevb.86.155148</a>},
    number={15}, journal={Physical Review B}, publisher={American Physical Society
    (APS)}, author={Ye, Ziliang and Zhang, Shuang and Wang, Yuan and Park, Yong-Shik
    and Zentgraf, Thomas and Bartal, Guy and Yin, Xiaobo and Zhang, Xiang}, year={2012}
    }'
  chicago: Ye, Ziliang, Shuang Zhang, Yuan Wang, Yong-Shik Park, Thomas Zentgraf,
    Guy Bartal, Xiaobo Yin, and Xiang Zhang. “Mapping the Near-Field Dynamics in Plasmon-Induced
    Transparency.” <i>Physical Review B</i> 86, no. 15 (2012). <a href="https://doi.org/10.1103/physrevb.86.155148">https://doi.org/10.1103/physrevb.86.155148</a>.
  ieee: Z. Ye <i>et al.</i>, “Mapping the near-field dynamics in plasmon-induced transparency,”
    <i>Physical Review B</i>, vol. 86, no. 15, 2012.
  mla: Ye, Ziliang, et al. “Mapping the Near-Field Dynamics in Plasmon-Induced Transparency.”
    <i>Physical Review B</i>, vol. 86, no. 15, American Physical Society (APS), 2012,
    doi:<a href="https://doi.org/10.1103/physrevb.86.155148">10.1103/physrevb.86.155148</a>.
  short: Z. Ye, S. Zhang, Y. Wang, Y.-S. Park, T. Zentgraf, G. Bartal, X. Yin, X.
    Zhang, Physical Review B 86 (2012).
date_created: 2018-03-22T18:46:51Z
date_updated: 2022-01-06T06:53:05Z
department:
- _id: '15'
- _id: '230'
doi: 10.1103/physrevb.86.155148
intvolume: '        86'
issue: '15'
publication: Physical Review B
publication_identifier:
  issn:
  - 1098-0121
  - 1550-235X
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Mapping the near-field dynamics in plasmon-induced transparency
type: journal_article
user_id: '30525'
volume: 86
year: '2012'
...
---
_id: '1713'
author:
- first_name: Yongmin
  full_name: Liu, Yongmin
  last_name: Liu
- first_name: Stefano
  full_name: Palomba, Stefano
  last_name: Palomba
- first_name: Yongshik
  full_name: Park, Yongshik
  last_name: Park
- first_name: Thomas
  full_name: Zentgraf, Thomas
  id: '30525'
  last_name: Zentgraf
  orcid: 0000-0002-8662-1101
- first_name: Xiaobo
  full_name: Yin, Xiaobo
  last_name: Yin
- first_name: Xiang
  full_name: Zhang, Xiang
  last_name: Zhang
citation:
  ama: Liu Y, Palomba S, Park Y, Zentgraf T, Yin X, Zhang X. Compact Magnetic Antennas
    for Directional Excitation of Surface Plasmons. <i>Nano Letters</i>. 2012;12(9):4853-4858.
    doi:<a href="https://doi.org/10.1021/nl302339z">10.1021/nl302339z</a>
  apa: Liu, Y., Palomba, S., Park, Y., Zentgraf, T., Yin, X., &#38; Zhang, X. (2012).
    Compact Magnetic Antennas for Directional Excitation of Surface Plasmons. <i>Nano
    Letters</i>, <i>12</i>(9), 4853–4858. <a href="https://doi.org/10.1021/nl302339z">https://doi.org/10.1021/nl302339z</a>
  bibtex: '@article{Liu_Palomba_Park_Zentgraf_Yin_Zhang_2012, title={Compact Magnetic
    Antennas for Directional Excitation of Surface Plasmons}, volume={12}, DOI={<a
    href="https://doi.org/10.1021/nl302339z">10.1021/nl302339z</a>}, number={9}, journal={Nano
    Letters}, publisher={American Chemical Society (ACS)}, author={Liu, Yongmin and
    Palomba, Stefano and Park, Yongshik and Zentgraf, Thomas and Yin, Xiaobo and Zhang,
    Xiang}, year={2012}, pages={4853–4858} }'
  chicago: 'Liu, Yongmin, Stefano Palomba, Yongshik Park, Thomas Zentgraf, Xiaobo
    Yin, and Xiang Zhang. “Compact Magnetic Antennas for Directional Excitation of
    Surface Plasmons.” <i>Nano Letters</i> 12, no. 9 (2012): 4853–58. <a href="https://doi.org/10.1021/nl302339z">https://doi.org/10.1021/nl302339z</a>.'
  ieee: Y. Liu, S. Palomba, Y. Park, T. Zentgraf, X. Yin, and X. Zhang, “Compact Magnetic
    Antennas for Directional Excitation of Surface Plasmons,” <i>Nano Letters</i>,
    vol. 12, no. 9, pp. 4853–4858, 2012.
  mla: Liu, Yongmin, et al. “Compact Magnetic Antennas for Directional Excitation
    of Surface Plasmons.” <i>Nano Letters</i>, vol. 12, no. 9, American Chemical Society
    (ACS), 2012, pp. 4853–58, doi:<a href="https://doi.org/10.1021/nl302339z">10.1021/nl302339z</a>.
  short: Y. Liu, S. Palomba, Y. Park, T. Zentgraf, X. Yin, X. Zhang, Nano Letters
    12 (2012) 4853–4858.
date_created: 2018-03-22T18:47:13Z
date_updated: 2022-01-06T06:53:05Z
department:
- _id: '15'
- _id: '230'
doi: 10.1021/nl302339z
intvolume: '        12'
issue: '9'
page: 4853-4858
publication: Nano Letters
publication_identifier:
  issn:
  - 1530-6984
  - 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Compact Magnetic Antennas for Directional Excitation of Surface Plasmons
type: journal_article
user_id: '30525'
volume: 12
year: '2012'
...
---
_id: '1714'
author:
- first_name: N. D.
  full_name: Lanzillotti-Kimura, N. D.
  last_name: Lanzillotti-Kimura
- first_name: Thomas
  full_name: Zentgraf, Thomas
  id: '30525'
  last_name: Zentgraf
  orcid: 0000-0002-8662-1101
- first_name: X.
  full_name: Zhang, X.
  last_name: Zhang
citation:
  ama: Lanzillotti-Kimura ND, Zentgraf T, Zhang X. Control of plasmon dynamics in
    coupled plasmonic hybrid mode microcavities. <i>Physical Review B</i>. 2012;86(4).
    doi:<a href="https://doi.org/10.1103/physrevb.86.045309">10.1103/physrevb.86.045309</a>
  apa: Lanzillotti-Kimura, N. D., Zentgraf, T., &#38; Zhang, X. (2012). Control of
    plasmon dynamics in coupled plasmonic hybrid mode microcavities. <i>Physical Review
    B</i>, <i>86</i>(4). <a href="https://doi.org/10.1103/physrevb.86.045309">https://doi.org/10.1103/physrevb.86.045309</a>
  bibtex: '@article{Lanzillotti-Kimura_Zentgraf_Zhang_2012, title={Control of plasmon
    dynamics in coupled plasmonic hybrid mode microcavities}, volume={86}, DOI={<a
    href="https://doi.org/10.1103/physrevb.86.045309">10.1103/physrevb.86.045309</a>},
    number={4}, journal={Physical Review B}, publisher={American Physical Society
    (APS)}, author={Lanzillotti-Kimura, N. D. and Zentgraf, Thomas and Zhang, X.},
    year={2012} }'
  chicago: Lanzillotti-Kimura, N. D., Thomas Zentgraf, and X. Zhang. “Control of Plasmon
    Dynamics in Coupled Plasmonic Hybrid Mode Microcavities.” <i>Physical Review B</i>
    86, no. 4 (2012). <a href="https://doi.org/10.1103/physrevb.86.045309">https://doi.org/10.1103/physrevb.86.045309</a>.
  ieee: N. D. Lanzillotti-Kimura, T. Zentgraf, and X. Zhang, “Control of plasmon dynamics
    in coupled plasmonic hybrid mode microcavities,” <i>Physical Review B</i>, vol.
    86, no. 4, 2012.
  mla: Lanzillotti-Kimura, N. D., et al. “Control of Plasmon Dynamics in Coupled Plasmonic
    Hybrid Mode Microcavities.” <i>Physical Review B</i>, vol. 86, no. 4, American
    Physical Society (APS), 2012, doi:<a href="https://doi.org/10.1103/physrevb.86.045309">10.1103/physrevb.86.045309</a>.
  short: N.D. Lanzillotti-Kimura, T. Zentgraf, X. Zhang, Physical Review B 86 (2012).
date_created: 2018-03-22T18:47:42Z
date_updated: 2022-01-06T06:53:05Z
department:
- _id: '15'
- _id: '230'
doi: 10.1103/physrevb.86.045309
intvolume: '        86'
issue: '4'
publication: Physical Review B
publication_identifier:
  issn:
  - 1098-0121
  - 1550-235X
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Control of plasmon dynamics in coupled plasmonic hybrid mode microcavities
type: journal_article
user_id: '30525'
volume: 86
year: '2012'
...
---
_id: '1715'
author:
- first_name: Atsushi
  full_name: Ishikawa, Atsushi
  last_name: Ishikawa
- first_name: Rupert F.
  full_name: Oulton, Rupert F.
  last_name: Oulton
- first_name: Thomas
  full_name: Zentgraf, Thomas
  id: '30525'
  last_name: Zentgraf
  orcid: 0000-0002-8662-1101
- first_name: Xiang
  full_name: Zhang, Xiang
  last_name: Zhang
citation:
  ama: Ishikawa A, Oulton RF, Zentgraf T, Zhang X. Slow-light dispersion by transparent
    waveguide plasmon polaritons. <i>Physical Review B</i>. 2012;85(15). doi:<a href="https://doi.org/10.1103/physrevb.85.155108">10.1103/physrevb.85.155108</a>
  apa: Ishikawa, A., Oulton, R. F., Zentgraf, T., &#38; Zhang, X. (2012). Slow-light
    dispersion by transparent waveguide plasmon polaritons. <i>Physical Review B</i>,
    <i>85</i>(15). <a href="https://doi.org/10.1103/physrevb.85.155108">https://doi.org/10.1103/physrevb.85.155108</a>
  bibtex: '@article{Ishikawa_Oulton_Zentgraf_Zhang_2012, title={Slow-light dispersion
    by transparent waveguide plasmon polaritons}, volume={85}, DOI={<a href="https://doi.org/10.1103/physrevb.85.155108">10.1103/physrevb.85.155108</a>},
    number={15}, journal={Physical Review B}, publisher={American Physical Society
    (APS)}, author={Ishikawa, Atsushi and Oulton, Rupert F. and Zentgraf, Thomas and
    Zhang, Xiang}, year={2012} }'
  chicago: Ishikawa, Atsushi, Rupert F. Oulton, Thomas Zentgraf, and Xiang Zhang.
    “Slow-Light Dispersion by Transparent Waveguide Plasmon Polaritons.” <i>Physical
    Review B</i> 85, no. 15 (2012). <a href="https://doi.org/10.1103/physrevb.85.155108">https://doi.org/10.1103/physrevb.85.155108</a>.
  ieee: A. Ishikawa, R. F. Oulton, T. Zentgraf, and X. Zhang, “Slow-light dispersion
    by transparent waveguide plasmon polaritons,” <i>Physical Review B</i>, vol. 85,
    no. 15, 2012.
  mla: Ishikawa, Atsushi, et al. “Slow-Light Dispersion by Transparent Waveguide Plasmon
    Polaritons.” <i>Physical Review B</i>, vol. 85, no. 15, American Physical Society
    (APS), 2012, doi:<a href="https://doi.org/10.1103/physrevb.85.155108">10.1103/physrevb.85.155108</a>.
  short: A. Ishikawa, R.F. Oulton, T. Zentgraf, X. Zhang, Physical Review B 85 (2012).
date_created: 2018-03-22T18:48:00Z
date_updated: 2022-01-06T06:53:05Z
department:
- _id: '15'
- _id: '230'
doi: 10.1103/physrevb.85.155108
intvolume: '        85'
issue: '15'
publication: Physical Review B
publication_identifier:
  issn:
  - 1098-0121
  - 1550-235X
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Slow-light dispersion by transparent waveguide plasmon polaritons
type: journal_article
user_id: '30525'
volume: 85
year: '2012'
...
---
_id: '15981'
author:
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Dieter
  full_name: Thomas, Dieter
  last_name: Thomas
- first_name: Holger
  full_name: Block, Holger
  last_name: Block
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Markus
  full_name: Thöne, Markus
  last_name: Thöne
citation:
  ama: Tröster T, Marten T, Thomas D, Block H, Lauter C, Thöne M. Automobilleichtbau
    mit innovativen Werkstoffen und Prozessen. <i>Forschungsforum Paderborn</i>. 2012;15(15/2012):30-38.
  apa: Tröster, T., Marten, T., Thomas, D., Block, H., Lauter, C., &#38; Thöne, M.
    (2012). Automobilleichtbau mit innovativen Werkstoffen und Prozessen. <i>Forschungsforum
    Paderborn</i>, <i>15</i>(15/2012), 30–38.
  bibtex: '@article{Tröster_Marten_Thomas_Block_Lauter_Thöne_2012, title={Automobilleichtbau
    mit innovativen Werkstoffen und Prozessen}, volume={15}, number={15/2012}, journal={Forschungsforum
    Paderborn}, publisher={Universität Paderborn}, author={Tröster, Thomas and Marten,
    Thorsten and Thomas, Dieter and Block, Holger and Lauter, Christian and Thöne,
    Markus}, year={2012}, pages={30–38} }'
  chicago: 'Tröster, Thomas, Thorsten Marten, Dieter Thomas, Holger Block, Christian
    Lauter, and Markus Thöne. “Automobilleichtbau mit innovativen Werkstoffen und
    Prozessen.” <i>Forschungsforum Paderborn</i> 15, no. 15/2012 (2012): 30–38.'
  ieee: T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, and M. Thöne, “Automobilleichtbau
    mit innovativen Werkstoffen und Prozessen,” <i>Forschungsforum Paderborn</i>,
    vol. 15, no. 15/2012, pp. 30–38, 2012.
  mla: Tröster, Thomas, et al. “Automobilleichtbau mit innovativen Werkstoffen und
    Prozessen.” <i>Forschungsforum Paderborn</i>, vol. 15, no. 15/2012, Universität
    Paderborn, 2012, pp. 30–38.
  short: T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, M. Thöne, Forschungsforum
    Paderborn 15 (2012) 30–38.
date_created: 2020-02-24T08:31:17Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
intvolume: '        15'
issue: 15/2012
language:
- iso: ger
page: 30-38
publication: Forschungsforum Paderborn
publisher: Universität Paderborn
status: public
title: Automobilleichtbau mit innovativen Werkstoffen und Prozessen
type: journal_article
user_id: '72008'
volume: 15
year: '2012'
...
---
_id: '15983'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Simon
  full_name: Werneke, Simon
  last_name: Werneke
- first_name: Bernd
  full_name: Siewers, Bernd
  last_name: Siewers
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Werneke S, Siewers B, Tröster T. Endkonturennahe Fertigung von höchstfesten
    Hybridbauteilen. <i>Lightweight Design</i>. 2012:53-58. doi:<a href="https://doi.org/10.1365/s35725-012-0079-2">10.1365/s35725-012-0079-2</a>
  apa: Lauter, C., Werneke, S., Siewers, B., &#38; Tröster, T. (2012). Endkonturennahe
    Fertigung von höchstfesten Hybridbauteilen. <i>Lightweight Design</i>, 53–58.
    <a href="https://doi.org/10.1365/s35725-012-0079-2">https://doi.org/10.1365/s35725-012-0079-2</a>
  bibtex: '@article{Lauter_Werneke_Siewers_Tröster_2012, title={Endkonturennahe Fertigung
    von höchstfesten Hybridbauteilen}, DOI={<a href="https://doi.org/10.1365/s35725-012-0079-2">10.1365/s35725-012-0079-2</a>},
    journal={Lightweight Design}, author={Lauter, Christian and Werneke, Simon and
    Siewers, Bernd and Tröster, Thomas}, year={2012}, pages={53–58} }'
  chicago: Lauter, Christian, Simon Werneke, Bernd Siewers, and Thomas Tröster. “Endkonturennahe
    Fertigung von höchstfesten Hybridbauteilen.” <i>Lightweight Design</i>, 2012,
    53–58. <a href="https://doi.org/10.1365/s35725-012-0079-2">https://doi.org/10.1365/s35725-012-0079-2</a>.
  ieee: C. Lauter, S. Werneke, B. Siewers, and T. Tröster, “Endkonturennahe Fertigung
    von höchstfesten Hybridbauteilen,” <i>Lightweight Design</i>, pp. 53–58, 2012.
  mla: Lauter, Christian, et al. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.”
    <i>Lightweight Design</i>, 2012, pp. 53–58, doi:<a href="https://doi.org/10.1365/s35725-012-0079-2">10.1365/s35725-012-0079-2</a>.
  short: C. Lauter, S. Werneke, B. Siewers, T. Tröster, Lightweight Design (2012)
    53–58.
date_created: 2020-02-24T08:34:12Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1365/s35725-012-0079-2
language:
- iso: ger
page: 53-58
publication: Lightweight Design
publication_identifier:
  issn:
  - 1865-4819
  - 2192-8738
publication_status: published
status: public
title: Endkonturennahe Fertigung von höchstfesten Hybridbauteilen
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '15985'
author:
- first_name: Corin
  full_name: Reuter, Corin
  last_name: Reuter
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Holger
  full_name: Block, Holger
  last_name: Block
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Reuter C, Frantz M, Lauter C, Block H, Tröster T. Simulation and testing of
    hybrid structures consisting of press-hardened steel and CFRP. In: ; 2012.'
  apa: Reuter, C., Frantz, M., Lauter, C., Block, H., &#38; Tröster, T. (2012). Simulation
    and testing of hybrid structures consisting of press-hardened steel and CFRP.
    Presented at the 1st International Conference on Mechanics of Nano, Micro and
    Macro Composite Structures (ICNMMCS), Turin, Italy.
  bibtex: '@inproceedings{Reuter_Frantz_Lauter_Block_Tröster_2012, title={Simulation
    and testing of hybrid structures consisting of press-hardened steel and CFRP},
    author={Reuter, Corin and Frantz, Meike and Lauter, Christian and Block, Holger
    and Tröster, Thomas}, year={2012} }'
  chicago: Reuter, Corin, Meike Frantz, Christian Lauter, Holger Block, and Thomas
    Tröster. “Simulation and Testing of Hybrid Structures Consisting of Press-Hardened
    Steel and CFRP,” 2012.
  ieee: C. Reuter, M. Frantz, C. Lauter, H. Block, and T. Tröster, “Simulation and
    testing of hybrid structures consisting of press-hardened steel and CFRP,” presented
    at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite
    Structures (ICNMMCS), Turin, Italy, 2012.
  mla: Reuter, Corin, et al. <i>Simulation and Testing of Hybrid Structures Consisting
    of Press-Hardened Steel and CFRP</i>. 2012.
  short: 'C. Reuter, M. Frantz, C. Lauter, H. Block, T. Tröster, in: 2012.'
conference:
  end_date: 2012-06-20
  location: Turin, Italy
  name: 1st International Conference on Mechanics of Nano, Micro and Macro Composite
    Structures (ICNMMCS)
  start_date: 2012-06-18
date_created: 2020-02-24T08:48:14Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Simulation and testing of hybrid structures consisting of press-hardened steel
  and CFRP
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '15987'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: J. P.
  full_name: Kohler, J. P.
  last_name: Kohler
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Lauter C, Frantz M, Kohler JP, Tröster T. Crash tests of hybrid structures
    consisting of sheet metal and local CFRP reinforcements. In: ; 2012.'
  apa: Lauter, C., Frantz, M., Kohler, J. P., &#38; Tröster, T. (2012). Crash tests
    of hybrid structures consisting of sheet metal and local CFRP reinforcements.
    Presented at the 15th European Conference on Composite Materials (ECCM15), Venice,
    Italy.
  bibtex: '@inproceedings{Lauter_Frantz_Kohler_Tröster_2012, title={Crash tests of
    hybrid structures consisting of sheet metal and local CFRP reinforcements}, author={Lauter,
    Christian and Frantz, Meike and Kohler, J. P. and Tröster, Thomas}, year={2012}
    }'
  chicago: Lauter, Christian, Meike Frantz, J. P. Kohler, and Thomas Tröster. “Crash
    Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements,”
    2012.
  ieee: C. Lauter, M. Frantz, J. P. Kohler, and T. Tröster, “Crash tests of hybrid
    structures consisting of sheet metal and local CFRP reinforcements,” presented
    at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy,
    2012.
  mla: Lauter, Christian, et al. <i>Crash Tests of Hybrid Structures Consisting of
    Sheet Metal and Local CFRP Reinforcements</i>. 2012.
  short: 'C. Lauter, M. Frantz, J.P. Kohler, T. Tröster, in: 2012.'
conference:
  end_date: 2012-06-28
  location: Venice, Italy
  name: 15th European Conference on Composite Materials (ECCM15)
  start_date: 2012-06-24
date_created: 2020-02-24T08:58:53Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '15988'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: M.
  full_name: Sarrazin, M.
  last_name: Sarrazin
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Lauter C, Sarrazin M, Tröster T. Joining technologies for hybrid materials
    consisting of sheet metal and carbon fibre reinforced plastics. In: ; 2012.'
  apa: Lauter, C., Sarrazin, M., &#38; Tröster, T. (2012). Joining technologies for
    hybrid materials consisting of sheet metal and carbon fibre reinforced plastics.
    Presented at the 1st International Conference of the International Journal of
    Structural Integrity (IJSI), Porto, Portugal.
  bibtex: '@inproceedings{Lauter_Sarrazin_Tröster_2012, title={Joining technologies
    for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics},
    author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2012} }'
  chicago: Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Joining Technologies
    for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics,”
    2012.
  ieee: C. Lauter, M. Sarrazin, and T. Tröster, “Joining technologies for hybrid materials
    consisting of sheet metal and carbon fibre reinforced plastics,” presented at
    the 1st International Conference of the International Journal of Structural Integrity
    (IJSI), Porto, Portugal, 2012.
  mla: Lauter, Christian, et al. <i>Joining Technologies for Hybrid Materials Consisting
    of Sheet Metal and Carbon Fibre Reinforced Plastics</i>. 2012.
  short: 'C. Lauter, M. Sarrazin, T. Tröster, in: 2012.'
conference:
  end_date: 2012-06-28
  location: Porto, Portugal
  name: 1st International Conference of the International Journal of Structural Integrity
    (IJSI)
  start_date: 2012-06-25
date_created: 2020-02-24T09:01:31Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Joining technologies for hybrid materials consisting of sheet metal and carbon
  fibre reinforced plastics
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '15989'
author:
- first_name: Leif
  full_name: Ickert, Leif
  last_name: Ickert
- first_name: Dieter
  full_name: Thomas, Dieter
  last_name: Thomas
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Lutz
  full_name: Eckstein, Lutz
  last_name: Eckstein
citation:
  ama: Ickert L, Thomas D, Tröster T, Eckstein L. Beitrag zum Fortschritt im Automobilleichtbau
    durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen
    von Fahrzeugstrukturen in Mischbauweise. <i>FAT-Schriftenreihe 244</i>. 2012;(244).
  apa: Ickert, L., Thomas, D., Tröster, T., &#38; Eckstein, L. (2012). Beitrag zum
    Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative
    Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. <i>FAT-Schriftenreihe
    244</i>, (244).
  bibtex: '@article{Ickert_Thomas_Tröster_Eckstein_2012, title={Beitrag zum Fortschritt
    im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen
    für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise}, number={244},
    journal={FAT-Schriftenreihe 244}, publisher={Forschungsvereinigung Automobiltechnik
    e.V.}, author={Ickert, Leif and Thomas, Dieter and Tröster, Thomas and Eckstein,
    Lutz}, year={2012} }'
  chicago: Ickert, Leif, Dieter Thomas, Thomas Tröster, and Lutz Eckstein. “Beitrag
    zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und
    innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.”
    <i>FAT-Schriftenreihe 244</i>, no. 244 (2012).
  ieee: L. Ickert, D. Thomas, T. Tröster, and L. Eckstein, “Beitrag zum Fortschritt
    im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen
    für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise,” <i>FAT-Schriftenreihe
    244</i>, no. 244, 2012.
  mla: Ickert, Leif, et al. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte
    Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen
    in Mischbauweise.” <i>FAT-Schriftenreihe 244</i>, no. 244, Forschungsvereinigung
    Automobiltechnik e.V., 2012.
  short: L. Ickert, D. Thomas, T. Tröster, L. Eckstein, FAT-Schriftenreihe 244 (2012).
date_created: 2020-02-24T09:10:51Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
issue: '244'
language:
- iso: ger
publication: FAT-Schriftenreihe 244
publication_identifier:
  issn:
  - 2192-7863
publisher: Forschungsvereinigung Automobiltechnik e.V.
status: public
title: Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung
  und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '16004'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Bernd
  full_name: Siewers, Bernd
  last_name: Siewers
- first_name: B.
  full_name: Zanft, B.
  last_name: Zanft
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Lauter C, Siewers B, Zanft B, Tröster T. Crash worthiness of hybrid pillar
    structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.'
  apa: Lauter, C., Siewers, B., Zanft, B., &#38; Tröster, T. (2012). Crash worthiness
    of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements.
    Presented at the 15th International Conference on Experimental Mechanics (ICEM15),
    Porto .
  bibtex: '@inproceedings{Lauter_Siewers_Zanft_Tröster_2012, title={Crash worthiness
    of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements},
    author={Lauter, Christian and Siewers, Bernd and Zanft, B. and Tröster, Thomas},
    year={2012} }'
  chicago: Lauter, Christian, Bernd Siewers, B. Zanft, and Thomas Tröster. “Crash
    Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP
    Reinforcements,” 2012.
  ieee: C. Lauter, B. Siewers, B. Zanft, and T. Tröster, “Crash worthiness of hybrid
    pillar structures consisting of sheet metal and local CFRP reinforcements,” presented
    at the 15th International Conference on Experimental Mechanics (ICEM15), Porto
    , 2012.
  mla: Lauter, Christian, et al. <i>Crash Worthiness of Hybrid Pillar Structures Consisting
    of Sheet Metal and Local CFRP Reinforcements</i>. 2012.
  short: 'C. Lauter, B. Siewers, B. Zanft, T. Tröster, in: 2012.'
conference:
  end_date: 2012-07-27
  location: 'Porto '
  name: 15th International Conference on Experimental Mechanics (ICEM15)
  start_date: 2012-07-22
date_created: 2020-02-24T10:43:55Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Crash worthiness of hybrid pillar structures consisting of sheet metal and
  local CFRP reinforcements
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '16007'
author:
- first_name: M.
  full_name: Thöne, M.
  last_name: Thöne
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
citation:
  ama: 'Thöne M, Leuders S, Riemer A, Tröster T, Richard HA. Influence of heat-treatment
    on Selective Laser Melting products - e.g. Ti6Al4V. In: ; 2012.'
  apa: Thöne, M., Leuders, S., Riemer, A., Tröster, T., &#38; Richard, H. A. (2012).
    Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V.
    Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA.
  bibtex: '@inproceedings{Thöne_Leuders_Riemer_Tröster_Richard_2012, title={Influence
    of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V}, author={Thöne,
    M. and Leuders, S. and Riemer, A. and Tröster, Thomas and Richard, H. A.}, year={2012}
    }'
  chicago: Thöne, M., S. Leuders, A. Riemer, Thomas Tröster, and H. A. Richard. “Influence
    of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V,” 2012.
  ieee: M. Thöne, S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Influence
    of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V,” presented
    at the Solid Freeform Fabrication Symposium, Austin, Texas, USA, 2012.
  mla: Thöne, M., et al. <i>Influence of Heat-Treatment on Selective Laser Melting
    Products - e.g. Ti6Al4V</i>. 2012.
  short: 'M. Thöne, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.'
conference:
  end_date: 2012-08-08
  location: Austin, Texas, USA
  name: Solid Freeform Fabrication Symposium
  start_date: 2012-08-06
date_created: 2020-02-24T12:00:43Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '16008'
author:
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
citation:
  ama: Riemer A, Leuders S, Tröster T, Richard HA. Untersuchung zyklisch belasteter
    SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. <i>DVM-Bericht 139, Werkstoffe
    und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>. 2012.
  apa: Riemer, A., Leuders, S., Tröster, T., &#38; Richard, H. A. (2012). Untersuchung
    zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. <i>DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>.
  bibtex: '@article{Riemer_Leuders_Tröster_Richard_2012, title={Untersuchung zyklisch
    belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4}, journal={DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit},
    publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Riemer,
    A. and Leuders, S. and Tröster, Thomas and Richard, H. A.}, year={2012} }'
  chicago: Riemer, A., S. Leuders, Thomas Tröster, and H. A. Richard. “Untersuchung
    zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” <i>DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>,
    2012.
  ieee: A. Riemer, S. Leuders, T. Tröster, and H. A. Richard, “Untersuchung zyklisch
    belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4,” <i>DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>,
    2012.
  mla: Riemer, A., et al. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung
    TiAl6V4.” <i>DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen
    für die Betriebsfestigkeit</i>, Deutscher Verband für Materialforschung und -prüfung
    e.V., 2012.
  short: A. Riemer, S. Leuders, T. Tröster, H.A. Richard, DVM-Bericht 139, Werkstoffe
    und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit (2012).
date_created: 2020-02-24T12:15:35Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication: DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen
  für die Betriebsfestigkeit
publisher: Deutscher Verband für Materialforschung und -prüfung e.V.
status: public
title: Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung
  TiAl6V4
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '16009'
author:
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
citation:
  ama: 'Leuders S, Riemer A, Tröster T, Richard HA. Characterization and Comparison
    of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement.
    In: ; 2012.'
  apa: Leuders, S., Riemer, A., Tröster, T., &#38; Richard, H. A. (2012). Characterization
    and Comparison of Mechanical Properties of SLM Materials with Regard to Process
    Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically
    Graded Materials, Kassel.
  bibtex: '@inproceedings{Leuders_Riemer_Tröster_Richard_2012, title={Characterization
    and Comparison of Mechanical Properties of SLM Materials with Regard to Process
    Cycle Time Improvement}, author={Leuders, S. and Riemer, A. and Tröster, Thomas
    and Richard, H. A.}, year={2012} }'
  chicago: Leuders, S., A. Riemer, Thomas Tröster, and H. A. Richard. “Characterization
    and Comparison of Mechanical Properties of SLM Materials with Regard to Process
    Cycle Time Improvement,” 2012.
  ieee: S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Characterization and
    Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle
    Time Improvement,” presented at the 1st International Conference on Thermo-Mechanically
    Graded Materials, Kassel, 2012.
  mla: Leuders, S., et al. <i>Characterization and Comparison of Mechanical Properties
    of SLM Materials with Regard to Process Cycle Time Improvement</i>. 2012.
  short: 'S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.'
conference:
  end_date: 2012-10-30
  location: Kassel
  name: 1st International Conference on Thermo-Mechanically Graded Materials
  start_date: 2012-10-29
date_created: 2020-02-24T12:25:44Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Characterization and Comparison of Mechanical Properties of SLM Materials with
  Regard to Process Cycle Time Improvement
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '16015'
author:
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: M.
  full_name: Thöne, M.
  last_name: Thöne
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: T.
  full_name: Niendorf, T.
  last_name: Niendorf
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H.A.
  full_name: Richard, H.A.
  last_name: Richard
- first_name: H.J.
  full_name: Maier, H.J.
  last_name: Maier
citation:
  ama: 'Leuders S, Thöne M, Riemer A, et al. On the mechanical behaviour of titanium
    alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and
    crack growth performance. <i>International Journal of Fatigue</i>. 2012:300-307.
    doi:<a href="https://doi.org/10.1016/j.ijfatigue.2012.11.011">10.1016/j.ijfatigue.2012.11.011</a>'
  apa: 'Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H.
    A., &#38; Maier, H. J. (2012). On the mechanical behaviour of titanium alloy TiAl6V4
    manufactured by selective laser melting: Fatigue resistance and crack growth performance.
    <i>International Journal of Fatigue</i>, 300–307. <a href="https://doi.org/10.1016/j.ijfatigue.2012.11.011">https://doi.org/10.1016/j.ijfatigue.2012.11.011</a>'
  bibtex: '@article{Leuders_Thöne_Riemer_Niendorf_Tröster_Richard_Maier_2012, title={On
    the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser
    melting: Fatigue resistance and crack growth performance}, DOI={<a href="https://doi.org/10.1016/j.ijfatigue.2012.11.011">10.1016/j.ijfatigue.2012.11.011</a>},
    journal={International Journal of Fatigue}, author={Leuders, S. and Thöne, M.
    and Riemer, A. and Niendorf, T. and Tröster, Thomas and Richard, H.A. and Maier,
    H.J.}, year={2012}, pages={300–307} }'
  chicago: 'Leuders, S., M. Thöne, A. Riemer, T. Niendorf, Thomas Tröster, H.A. Richard,
    and H.J. Maier. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured
    by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.”
    <i>International Journal of Fatigue</i>, 2012, 300–307. <a href="https://doi.org/10.1016/j.ijfatigue.2012.11.011">https://doi.org/10.1016/j.ijfatigue.2012.11.011</a>.'
  ieee: 'S. Leuders <i>et al.</i>, “On the mechanical behaviour of titanium alloy
    TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack
    growth performance,” <i>International Journal of Fatigue</i>, pp. 300–307, 2012.'
  mla: 'Leuders, S., et al. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4
    Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.”
    <i>International Journal of Fatigue</i>, 2012, pp. 300–07, doi:<a href="https://doi.org/10.1016/j.ijfatigue.2012.11.011">10.1016/j.ijfatigue.2012.11.011</a>.'
  short: S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster, H.A. Richard, H.J.
    Maier, International Journal of Fatigue (2012) 300–307.
date_created: 2020-02-24T12:55:33Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.ijfatigue.2012.11.011
language:
- iso: eng
page: 300-307
publication: International Journal of Fatigue
publication_identifier:
  issn:
  - 0142-1123
publication_status: published
status: public
title: 'On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective
  laser melting: Fatigue resistance and crack growth performance'
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '22164'
abstract:
- lang: eng
  text: Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is "Fused Deposition Modeling" (FDM). It is one of
    the most used additive manufacturing processes to produce prototypes and end-use
    parts. From a 3D-CAD data set, components and assemblies are manufactured out
    of thermoplastic material layer by layer by means of an additive process. An extrusion
    head deposits the molten thermoplastic filament to create each layer with a particular
    tool path. Due to the thermal fusion the material bonds with the layer beneath
    and solidifies. Thus a permanent bonding of two layers is formed. In this paper
    the mechanical data of parts, manufactured with the system Fortus 400mc from Stratasys
    with the material Ultem*9085 are presented. Tensile and flexural tests according
    to both, the ASTM and the ISO standard, are conducted. Test specimens are generated
    with the standard parameters of the native software in different build directions.
    The tests show different strength and strain characteristics that depend on the
    given structure as a result of the build direction. Furthermore tensile specimens
    according to the ASTM standard are generated with changed parameters of the native
    software to increase the mechanical strength properties. The results are compared
    to injection molded strength properties.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. Tensile and Flexural Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085. In: <i>1st International Conference
    on Thermo-Mechanically Graded Materials</i>. Vol 1. ; 2012:129-134.'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2012). Tensile and Flexural Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, <i>1</i>, 129–134.
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Tensile and Flexural
    Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085}, volume={1},
    booktitle={1st International Conference on Thermo-Mechanically Graded Materials},
    author={Bagsik, A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={129–134}
    }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Tensile and Flexural Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, 1:129–34, 2012.
  ieee: A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of
    Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, 2012, vol. 1, pp. 129–134.
  mla: Bagsik, A., et al. “Tensile and Flexural Properties of Fused Deposition Modeling
    Parts Manufactured with ULTEM*9085.” <i>1st International Conference on Thermo-Mechanically
    Graded Materials</i>, vol. 1, 2012, pp. 129–34.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically
    Graded Materials, 2012, pp. 129–134.'
date_created: 2021-05-14T07:24:35Z
date_updated: 2022-04-25T07:58:51Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
intvolume: '         1'
language:
- iso: eng
page: 129-134
publication: 1st International Conference on Thermo-Mechanically Graded Materials
publication_identifier:
  isbn:
  - '9783942267588'
quality_controlled: '1'
status: public
title: Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured
  with ULTEM*9085
type: conference
user_id: '70729'
volume: 1
year: '2012'
...