--- _id: '4377' abstract: - lang: eng text: Confocal Raman spectroscopy was performed as an archetype imaging method to study the ferroelectric domain structure of periodically poled lithium niobate. More precisely, the linkage out of spatial resolution and spectral information proved itself as very useful. Here a specific modulation of the Raman lines by the local variation of polarity and a non-symmetric measuring-signal across the domain structure were found, which allows for imaging of domain boundaries as well as oppositely orientated domains. The high potential of this method is demonstrated by the visualization of the ferroelectric domain structures based on various phonon modes. article_type: original author: - first_name: Gerhard full_name: Berth, Gerhard id: '53' last_name: Berth - first_name: Wjatscheslaw full_name: Hahn, Wjatscheslaw last_name: Hahn - first_name: Volker full_name: Wiedemeier, Volker last_name: Wiedemeier - first_name: Artur full_name: Zrenner, Artur id: '606' last_name: Zrenner orcid: 0000-0002-5190-0944 - first_name: Simone full_name: Sanna, Simone last_name: Sanna - first_name: Wolf Gero full_name: Schmidt, Wolf Gero last_name: Schmidt citation: ama: Berth G, Hahn W, Wiedemeier V, Zrenner A, Sanna S, Schmidt WG. Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy. Ferroelectrics. 2011;420(1):44-48. doi:10.1080/00150193.2011.594774 apa: Berth, G., Hahn, W., Wiedemeier, V., Zrenner, A., Sanna, S., & Schmidt, W. G. (2011). Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy. Ferroelectrics, 420(1), 44–48. https://doi.org/10.1080/00150193.2011.594774 bibtex: '@article{Berth_Hahn_Wiedemeier_Zrenner_Sanna_Schmidt_2011, title={Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy}, volume={420}, DOI={10.1080/00150193.2011.594774}, number={1}, journal={Ferroelectrics}, publisher={Informa UK Limited}, author={Berth, Gerhard and Hahn, Wjatscheslaw and Wiedemeier, Volker and Zrenner, Artur and Sanna, Simone and Schmidt, Wolf Gero}, year={2011}, pages={44–48} }' chicago: 'Berth, Gerhard, Wjatscheslaw Hahn, Volker Wiedemeier, Artur Zrenner, Simone Sanna, and Wolf Gero Schmidt. “Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy.” Ferroelectrics 420, no. 1 (2011): 44–48. https://doi.org/10.1080/00150193.2011.594774.' ieee: G. Berth, W. Hahn, V. Wiedemeier, A. Zrenner, S. Sanna, and W. G. Schmidt, “Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy,” Ferroelectrics, vol. 420, no. 1, pp. 44–48, 2011. mla: Berth, Gerhard, et al. “Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy.” Ferroelectrics, vol. 420, no. 1, Informa UK Limited, 2011, pp. 44–48, doi:10.1080/00150193.2011.594774. short: G. Berth, W. Hahn, V. Wiedemeier, A. Zrenner, S. Sanna, W.G. Schmidt, Ferroelectrics 420 (2011) 44–48. date_created: 2018-09-11T14:10:35Z date_updated: 2022-01-06T07:01:00Z department: - _id: '15' - _id: '230' - _id: '35' doi: 10.1080/00150193.2011.594774 intvolume: ' 420' issue: '1' keyword: - Raman spectroscopy - ferroelectric domains - LiNbO3 - confocal imaging language: - iso: eng page: 44-48 publication: Ferroelectrics publication_identifier: issn: - 0015-0193 - 1563-5112 publication_status: published publisher: Informa UK Limited status: public title: Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy type: journal_article user_id: '49428' volume: 420 year: '2011' ... --- _id: '4378' abstract: - lang: eng text: Using a combined all-ultra-high-vacuum process employing lateral patterning with focused ion beams and molecular beam epitaxy, site-selective growth of single (In,Ga)As quantum dots is achieved. We have embedded such a layer of intentionally positioned quantum dots in the intrinsic region of a p-i-n junction so that the quantum dots can be driven electrically. In this contribution, we will present our results on the morphological properties of the ion-beam modified surface on which the quantum dot nucleation occurs together with a characterization of the electrical and optoelectronic properties. We will demonstrate that a single, individual quantum dot can directly be electrically addressed. article_type: original author: - first_name: Minisha full_name: Mehta, Minisha last_name: Mehta - first_name: Dirk full_name: Reuter, Dirk id: '37763' last_name: Reuter - first_name: Andreas D. full_name: Wieck, Andreas D. last_name: Wieck - first_name: Steffen full_name: Michaelis de Vasconcellos, Steffen last_name: Michaelis de Vasconcellos - first_name: Artur full_name: Zrenner, Artur id: '606' last_name: Zrenner orcid: 0000-0002-5190-0944 - first_name: Cedrik full_name: Meier, Cedrik id: '20798' last_name: Meier orcid: https://orcid.org/0000-0002-3787-3572 citation: ama: Mehta M, Reuter D, Wieck AD, Michaelis de Vasconcellos S, Zrenner A, Meier C. Electrically driven intentionally positioned single quantum dot. physica status solidi (c). 2011;8(4):1182-1185. doi:10.1002/pssc.201000828 apa: Mehta, M., Reuter, D., Wieck, A. D., Michaelis de Vasconcellos, S., Zrenner, A., & Meier, C. (2011). Electrically driven intentionally positioned single quantum dot. Physica Status Solidi (C), 8(4), 1182–1185. https://doi.org/10.1002/pssc.201000828 bibtex: '@article{Mehta_Reuter_Wieck_Michaelis de Vasconcellos_Zrenner_Meier_2011, title={Electrically driven intentionally positioned single quantum dot}, volume={8}, DOI={10.1002/pssc.201000828}, number={4}, journal={physica status solidi (c)}, publisher={Wiley}, author={Mehta, Minisha and Reuter, Dirk and Wieck, Andreas D. and Michaelis de Vasconcellos, Steffen and Zrenner, Artur and Meier, Cedrik}, year={2011}, pages={1182–1185} }' chicago: 'Mehta, Minisha, Dirk Reuter, Andreas D. Wieck, Steffen Michaelis de Vasconcellos, Artur Zrenner, and Cedrik Meier. “Electrically Driven Intentionally Positioned Single Quantum Dot.” Physica Status Solidi (C) 8, no. 4 (2011): 1182–85. https://doi.org/10.1002/pssc.201000828.' ieee: M. Mehta, D. Reuter, A. D. Wieck, S. Michaelis de Vasconcellos, A. Zrenner, and C. Meier, “Electrically driven intentionally positioned single quantum dot,” physica status solidi (c), vol. 8, no. 4, pp. 1182–1185, 2011. mla: Mehta, Minisha, et al. “Electrically Driven Intentionally Positioned Single Quantum Dot.” Physica Status Solidi (C), vol. 8, no. 4, Wiley, 2011, pp. 1182–85, doi:10.1002/pssc.201000828. short: M. Mehta, D. Reuter, A.D. Wieck, S. Michaelis de Vasconcellos, A. Zrenner, C. Meier, Physica Status Solidi (C) 8 (2011) 1182–1185. date_created: 2018-09-11T14:15:28Z date_updated: 2022-01-06T07:01:00Z department: - _id: '15' - _id: '230' - _id: '35' - _id: '287' doi: 10.1002/pssc.201000828 intvolume: ' 8' issue: '4' keyword: - molecular beam epitaxy - quantum dot - site control - electroluminescence language: - iso: eng page: 1182-1185 publication: physica status solidi (c) publication_identifier: issn: - 1862-6351 publication_status: published publisher: Wiley status: public title: Electrically driven intentionally positioned single quantum dot type: journal_article user_id: '20798' volume: 8 year: '2011' ... --- _id: '4379' abstract: - lang: eng text: Uniform mesoporous Si double layers are formed on 4 inch p-type < 100> wafers with an off orientation of 6º towards < 111> by means of electrochemical etching in ethanoic-based HF electrolytes. These substrates are of interest for the epitaxial growth of III–V compound semiconductor stacks on their top for the production of multi-junction solar cells and very thin electronic devices. We demonstrate transfer of porous layers after an annealing process in hydrogen atmosphere. Electron Back-Scatter Diffraction analysis confirms that the substrate orientation is conserved during the etching and annealing steps. Confocal μ-Raman spectroscopy analysis shows a decrease in the Raman signal intensity after etching and a subsequent increase after annealing while no shift is observed. By means of Atomic Force Microscopy, analysis the surface appearance after the etching and annealing steps can be visualized. The mean surface roughness varies during the process from 0.55 nm for the unprocessed wafers to 0.27 nm after etching and 0.78 nm after annealing. The decrease of average roughness after etching is caused by an electropolishing step prior to porous formation. Despite of slight increase of mean surface roughness after annealing the samples are still appropriate for high quality epitaxial growth and subsequent lift-off. article_type: original author: - first_name: E. full_name: Garralaga Rojas, E. last_name: Garralaga Rojas - first_name: B. full_name: Terheiden, B. last_name: Terheiden - first_name: H. full_name: Plagwitz, H. last_name: Plagwitz - first_name: J. full_name: Hensen, J. last_name: Hensen - first_name: V. full_name: Wiedemeier, V. last_name: Wiedemeier - first_name: Gerhard full_name: Berth, Gerhard id: '53' last_name: Berth - first_name: Artur full_name: Zrenner, Artur id: '606' last_name: Zrenner orcid: 0000-0002-5190-0944 - first_name: R. full_name: Brendel, R. last_name: Brendel citation: ama: Garralaga Rojas E, Terheiden B, Plagwitz H, et al. Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111). Thin Solid Films. 2011;520(1):606-609. doi:10.1016/j.tsf.2011.07.063 apa: Garralaga Rojas, E., Terheiden, B., Plagwitz, H., Hensen, J., Wiedemeier, V., Berth, G., … Brendel, R. (2011). Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111). Thin Solid Films, 520(1), 606–609. https://doi.org/10.1016/j.tsf.2011.07.063 bibtex: '@article{Garralaga Rojas_Terheiden_Plagwitz_Hensen_Wiedemeier_Berth_Zrenner_Brendel_2011, title={Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111)}, volume={520}, DOI={10.1016/j.tsf.2011.07.063}, number={1}, journal={Thin Solid Films}, publisher={Elsevier BV}, author={Garralaga Rojas, E. and Terheiden, B. and Plagwitz, H. and Hensen, J. and Wiedemeier, V. and Berth, Gerhard and Zrenner, Artur and Brendel, R.}, year={2011}, pages={606–609} }' chicago: 'Garralaga Rojas, E., B. Terheiden, H. Plagwitz, J. Hensen, V. Wiedemeier, Gerhard Berth, Artur Zrenner, and R. Brendel. “Lift-off of Mesoporous Layers by Electrochemical Etching on Si (100) Substrates with Miscut of 6° off towards (111).” Thin Solid Films 520, no. 1 (2011): 606–9. https://doi.org/10.1016/j.tsf.2011.07.063.' ieee: E. Garralaga Rojas et al., “Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111),” Thin Solid Films, vol. 520, no. 1, pp. 606–609, 2011. mla: Garralaga Rojas, E., et al. “Lift-off of Mesoporous Layers by Electrochemical Etching on Si (100) Substrates with Miscut of 6° off towards (111).” Thin Solid Films, vol. 520, no. 1, Elsevier BV, 2011, pp. 606–09, doi:10.1016/j.tsf.2011.07.063. short: E. Garralaga Rojas, B. Terheiden, H. Plagwitz, J. Hensen, V. Wiedemeier, G. Berth, A. Zrenner, R. Brendel, Thin Solid Films 520 (2011) 606–609. date_created: 2018-09-11T14:21:12Z date_updated: 2022-01-06T07:01:00Z department: - _id: '15' - _id: '230' - _id: '35' doi: 10.1016/j.tsf.2011.07.063 intvolume: ' 520' issue: '1' keyword: - Porous Si - Layer transfer - Thin-film - Photovoltaics language: - iso: eng page: 606-609 publication: Thin Solid Films publication_identifier: issn: - 0040-6090 publication_status: published publisher: Elsevier BV status: public title: Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111) type: journal_article user_id: '49428' volume: 520 year: '2011' ... --- _id: '1723' author: - first_name: Tobias full_name: Utikal, Tobias last_name: Utikal - first_name: Thomas full_name: Zentgraf, Thomas id: '30525' last_name: Zentgraf orcid: 0000-0002-8662-1101 - first_name: Sergei G. full_name: Tikhodeev, Sergei G. last_name: Tikhodeev - first_name: Markus full_name: Lippitz, Markus last_name: Lippitz - first_name: Harald full_name: Giessen, Harald last_name: Giessen citation: ama: Utikal T, Zentgraf T, Tikhodeev SG, Lippitz M, Giessen H. Tailoring the photonic band splitting in metallodielectric photonic crystal superlattices. Physical Review B. 2011;84(7). doi:10.1103/physrevb.84.075101 apa: Utikal, T., Zentgraf, T., Tikhodeev, S. G., Lippitz, M., & Giessen, H. (2011). Tailoring the photonic band splitting in metallodielectric photonic crystal superlattices. Physical Review B, 84(7). https://doi.org/10.1103/physrevb.84.075101 bibtex: '@article{Utikal_Zentgraf_Tikhodeev_Lippitz_Giessen_2011, title={Tailoring the photonic band splitting in metallodielectric photonic crystal superlattices}, volume={84}, DOI={10.1103/physrevb.84.075101}, number={7}, journal={Physical Review B}, publisher={American Physical Society (APS)}, author={Utikal, Tobias and Zentgraf, Thomas and Tikhodeev, Sergei G. and Lippitz, Markus and Giessen, Harald}, year={2011} }' chicago: Utikal, Tobias, Thomas Zentgraf, Sergei G. Tikhodeev, Markus Lippitz, and Harald Giessen. “Tailoring the Photonic Band Splitting in Metallodielectric Photonic Crystal Superlattices.” Physical Review B 84, no. 7 (2011). https://doi.org/10.1103/physrevb.84.075101. ieee: T. Utikal, T. Zentgraf, S. G. Tikhodeev, M. Lippitz, and H. Giessen, “Tailoring the photonic band splitting in metallodielectric photonic crystal superlattices,” Physical Review B, vol. 84, no. 7, 2011. mla: Utikal, Tobias, et al. “Tailoring the Photonic Band Splitting in Metallodielectric Photonic Crystal Superlattices.” Physical Review B, vol. 84, no. 7, American Physical Society (APS), 2011, doi:10.1103/physrevb.84.075101. short: T. Utikal, T. Zentgraf, S.G. Tikhodeev, M. Lippitz, H. Giessen, Physical Review B 84 (2011). date_created: 2018-03-23T12:26:16Z date_updated: 2022-01-06T06:53:06Z department: - _id: '15' - _id: '230' doi: 10.1103/physrevb.84.075101 intvolume: ' 84' issue: '7' publication: Physical Review B publication_identifier: issn: - 1098-0121 - 1550-235X publication_status: published publisher: American Physical Society (APS) status: public title: Tailoring the photonic band splitting in metallodielectric photonic crystal superlattices type: journal_article user_id: '30525' volume: 84 year: '2011' ... --- _id: '1724' author: - first_name: Majid full_name: Gharghi, Majid last_name: Gharghi - first_name: Christopher full_name: Gladden, Christopher last_name: Gladden - first_name: Thomas full_name: Zentgraf, Thomas id: '30525' last_name: Zentgraf orcid: 0000-0002-8662-1101 - first_name: Yongmin full_name: Liu, Yongmin last_name: Liu - first_name: Xiaobo full_name: Yin, Xiaobo last_name: Yin - first_name: Jason full_name: Valentine, Jason last_name: Valentine - first_name: Xiang full_name: Zhang, Xiang last_name: Zhang citation: ama: Gharghi M, Gladden C, Zentgraf T, et al. A Carpet Cloak for Visible Light. Nano Letters. 2011;11(7):2825-2828. doi:10.1021/nl201189z apa: Gharghi, M., Gladden, C., Zentgraf, T., Liu, Y., Yin, X., Valentine, J., & Zhang, X. (2011). A Carpet Cloak for Visible Light. Nano Letters, 11(7), 2825–2828. https://doi.org/10.1021/nl201189z bibtex: '@article{Gharghi_Gladden_Zentgraf_Liu_Yin_Valentine_Zhang_2011, title={A Carpet Cloak for Visible Light}, volume={11}, DOI={10.1021/nl201189z}, number={7}, journal={Nano Letters}, publisher={American Chemical Society (ACS)}, author={Gharghi, Majid and Gladden, Christopher and Zentgraf, Thomas and Liu, Yongmin and Yin, Xiaobo and Valentine, Jason and Zhang, Xiang}, year={2011}, pages={2825–2828} }' chicago: 'Gharghi, Majid, Christopher Gladden, Thomas Zentgraf, Yongmin Liu, Xiaobo Yin, Jason Valentine, and Xiang Zhang. “A Carpet Cloak for Visible Light.” Nano Letters 11, no. 7 (2011): 2825–28. https://doi.org/10.1021/nl201189z.' ieee: M. Gharghi et al., “A Carpet Cloak for Visible Light,” Nano Letters, vol. 11, no. 7, pp. 2825–2828, 2011. mla: Gharghi, Majid, et al. “A Carpet Cloak for Visible Light.” Nano Letters, vol. 11, no. 7, American Chemical Society (ACS), 2011, pp. 2825–28, doi:10.1021/nl201189z. short: M. Gharghi, C. Gladden, T. Zentgraf, Y. Liu, X. Yin, J. Valentine, X. Zhang, Nano Letters 11 (2011) 2825–2828. date_created: 2018-03-23T12:26:47Z date_updated: 2022-01-06T06:53:07Z department: - _id: '15' - _id: '230' doi: 10.1021/nl201189z intvolume: ' 11' issue: '7' page: 2825-2828 publication: Nano Letters publication_identifier: issn: - 1530-6984 - 1530-6992 publication_status: published publisher: American Chemical Society (ACS) status: public title: A Carpet Cloak for Visible Light type: journal_article user_id: '30525' volume: 11 year: '2011' ... --- _id: '15969' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: M. full_name: Sarrazin, M. last_name: Sarrazin - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Lauter C, Sarrazin M, Tröster T. Multimaterialsysteme höchstfest verbunden. Adhäsion – Kleben und Dichten. 2011;3/2011:39-43. apa: Lauter, C., Sarrazin, M., & Tröster, T. (2011). Multimaterialsysteme höchstfest verbunden. Adhäsion – Kleben und Dichten, 3/2011, 39–43. bibtex: '@article{Lauter_Sarrazin_Tröster_2011, title={Multimaterialsysteme höchstfest verbunden}, volume={3/2011}, journal={Adhäsion – Kleben und Dichten}, publisher={Springer Vieweg}, author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2011}, pages={39–43} }' chicago: 'Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Multimaterialsysteme höchstfest verbunden.” Adhäsion – Kleben und Dichten 3/2011 (2011): 39–43.' ieee: C. Lauter, M. Sarrazin, and T. Tröster, “Multimaterialsysteme höchstfest verbunden,” Adhäsion – Kleben und Dichten, vol. 3/2011, pp. 39–43, 2011. mla: Lauter, Christian, et al. “Multimaterialsysteme höchstfest verbunden.” Adhäsion – Kleben und Dichten, vol. 3/2011, Springer Vieweg, 2011, pp. 39–43. short: C. Lauter, M. Sarrazin, T. Tröster, Adhäsion – Kleben und Dichten 3/2011 (2011) 39–43. date_created: 2020-02-21T15:07:12Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger page: 39-43 publication: Adhäsion – Kleben und Dichten publisher: Springer Vieweg status: public title: Multimaterialsysteme höchstfest verbunden type: journal_article user_id: '72008' volume: 3/2011 year: '2011' ... --- _id: '15971' author: - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: O. full_name: Stübbe, O. last_name: Stübbe - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: J. full_name: Schrange, J. last_name: Schrange - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Frantz M, Stübbe O, Lauter C, Schrange J, Tröster T. Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. In: ; 2011.' apa: Frantz, M., Stübbe, O., Lauter, C., Schrange, J., & Tröster, T. (2011). Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln. bibtex: '@inproceedings{Frantz_Stübbe_Lauter_Schrange_Tröster_2011, title={Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder}, author={Frantz, Meike and Stübbe, O. and Lauter, Christian and Schrange, J. and Tröster, Thomas}, year={2011} }' chicago: Frantz, Meike, O. Stübbe, Christian Lauter, J. Schrange, and Thomas Tröster. “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder,” 2011. ieee: M. Frantz, O. Stübbe, C. Lauter, J. Schrange, and T. Tröster, “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011. mla: Frantz, Meike, et al. Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. 2011. short: 'M. Frantz, O. Stübbe, C. Lauter, J. Schrange, T. Tröster, in: 2011.' conference: end_date: 2011-03-16 location: Köln name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe start_date: 2011-03-15 date_created: 2020-02-21T15:17:59Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger status: public title: Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder type: conference user_id: '72008' year: '2011' ... --- _id: '15972' author: - first_name: D. full_name: Thomas, D. last_name: Thomas - first_name: H. full_name: Block, H. last_name: Block - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: J. full_name: Krogmeier, J. last_name: Krogmeier citation: ama: 'Thomas D, Block H, Tröster T, Krogmeier J. Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. In: ; 2011.' apa: Thomas, D., Block, H., Tröster, T., & Krogmeier, J. (2011). Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln. bibtex: '@inproceedings{Thomas_Block_Tröster_Krogmeier_2011, title={Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung}, author={Thomas, D. and Block, H. and Tröster, Thomas and Krogmeier, J.}, year={2011} }' chicago: Thomas, D., H. Block, Thomas Tröster, and J. Krogmeier. “Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,” 2011. ieee: D. Thomas, H. Block, T. Tröster, and J. Krogmeier, “Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011. mla: Thomas, D., et al. Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. 2011. short: 'D. Thomas, H. Block, T. Tröster, J. Krogmeier, in: 2011.' conference: end_date: 2011-03-16 location: Köln name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe start_date: 2011-03-15 date_created: 2020-02-21T15:20:49Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger status: public title: Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung type: conference user_id: '72008' year: '2011' ... --- _id: '15974' author: - first_name: Thorsten full_name: Marten, Thorsten id: '338' last_name: Marten - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Marten T, Lauter C, Tröster T. Automobilleichtbau durch höchstfeste Multimaterialsysteme. Ingenieurspiegel. 2011;2/2011:67-69. apa: Marten, T., Lauter, C., & Tröster, T. (2011). Automobilleichtbau durch höchstfeste Multimaterialsysteme. Ingenieurspiegel, 2/2011, 67–69. bibtex: '@article{Marten_Lauter_Tröster_2011, title={Automobilleichtbau durch höchstfeste Multimaterialsysteme}, volume={2/2011}, journal={Ingenieurspiegel}, publisher={Public Verlagsgesellschaft und Anzeigenagentur}, author={Marten, Thorsten and Lauter, Christian and Tröster, Thomas}, year={2011}, pages={67–69} }' chicago: 'Marten, Thorsten, Christian Lauter, and Thomas Tröster. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.” Ingenieurspiegel 2/2011 (2011): 67–69.' ieee: T. Marten, C. Lauter, and T. Tröster, “Automobilleichtbau durch höchstfeste Multimaterialsysteme,” Ingenieurspiegel, vol. 2/2011, pp. 67–69, 2011. mla: Marten, Thorsten, et al. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.” Ingenieurspiegel, vol. 2/2011, Public Verlagsgesellschaft und Anzeigenagentur, 2011, pp. 67–69. short: T. Marten, C. Lauter, T. Tröster, Ingenieurspiegel 2/2011 (2011) 67–69. date_created: 2020-02-21T15:24:34Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger page: 67-69 publication: Ingenieurspiegel publisher: Public Verlagsgesellschaft und Anzeigenagentur status: public title: Automobilleichtbau durch höchstfeste Multimaterialsysteme type: journal_article user_id: '72008' volume: 2/2011 year: '2011' ... --- _id: '15975' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: D. full_name: Thomas, D. last_name: Thomas - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: J. full_name: Niewel, J. last_name: Niewel - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Lauter C, Thomas D, Frantz M, Niewel J, Tröster T. Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte. 2011;2:6-7. apa: Lauter, C., Thomas, D., Frantz, M., Niewel, J., & Tröster, T. (2011). Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, 2, 6–7. bibtex: '@article{Lauter_Thomas_Frantz_Niewel_Tröster_2011, title={Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen}, volume={2}, journal={Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte}, publisher={HW-Verlag}, author={Lauter, Christian and Thomas, D. and Frantz, Meike and Niewel, J. and Tröster, Thomas}, year={2011}, pages={6–7} }' chicago: 'Lauter, Christian, D. Thomas, Meike Frantz, J. Niewel, and Thomas Tröster. “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011): 6–7.' ieee: C. Lauter, D. Thomas, M. Frantz, J. Niewel, and T. Tröster, “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen,” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, vol. 2, pp. 6–7, 2011. mla: Lauter, Christian, et al. “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, vol. 2, HW-Verlag, 2011, pp. 6–7. short: C. Lauter, D. Thomas, M. Frantz, J. Niewel, T. Tröster, Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011) 6–7. date_created: 2020-02-21T15:28:10Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' intvolume: ' 2' language: - iso: ger page: 6-7 publication: Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte publisher: HW-Verlag status: public title: Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen type: journal_article user_id: '72008' volume: 2 year: '2011' ... --- _id: '15980' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: Bernd full_name: Siewers, Bernd last_name: Siewers - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Lauter C, Frantz M, Siewers B, Tröster T. Hybrid structures for tailored structural automotive components. JEC Composites Magazine. 2011;69:35-37. apa: Lauter, C., Frantz, M., Siewers, B., & Tröster, T. (2011). Hybrid structures for tailored structural automotive components. JEC Composites Magazine, 69, 35–37. bibtex: '@article{Lauter_Frantz_Siewers_Tröster_2011, title={Hybrid structures for tailored structural automotive components}, volume={69}, journal={JEC Composites Magazine}, publisher={JEC Composites}, author={Lauter, Christian and Frantz, Meike and Siewers, Bernd and Tröster, Thomas}, year={2011}, pages={35–37} }' chicago: 'Lauter, Christian, Meike Frantz, Bernd Siewers, and Thomas Tröster. “Hybrid Structures for Tailored Structural Automotive Components.” JEC Composites Magazine 69 (2011): 35–37.' ieee: C. Lauter, M. Frantz, B. Siewers, and T. Tröster, “Hybrid structures for tailored structural automotive components,” JEC Composites Magazine, vol. 69, pp. 35–37, 2011. mla: Lauter, Christian, et al. “Hybrid Structures for Tailored Structural Automotive Components.” JEC Composites Magazine, vol. 69, JEC Composites, 2011, pp. 35–37. short: C. Lauter, M. Frantz, B. Siewers, T. Tröster, JEC Composites Magazine 69 (2011) 35–37. date_created: 2020-02-24T08:22:55Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' intvolume: ' 69' language: - iso: eng page: 35-37 publication: JEC Composites Magazine publisher: JEC Composites status: public title: Hybrid structures for tailored structural automotive components type: journal_article user_id: '72008' volume: 69 year: '2011' ... --- _id: '15990' author: - first_name: D. full_name: Thomas, D. last_name: Thomas - first_name: H. full_name: Block, H. last_name: Block - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Thomas D, Block H, Tröster T. Production of load-adapted lightweight designs by partial hardening. In: ; 2011.' apa: Thomas, D., Block, H., & Tröster, T. (2011). Production of load-adapted lightweight designs by partial hardening. Presented at the 3rd International Conference on Steels in Cars and Trucks (SCT), Salzburg. bibtex: '@inproceedings{Thomas_Block_Tröster_2011, title={Production of load-adapted lightweight designs by partial hardening}, author={Thomas, D. and Block, H. and Tröster, Thomas}, year={2011} }' chicago: Thomas, D., H. Block, and Thomas Tröster. “Production of Load-Adapted Lightweight Designs by Partial Hardening,” 2011. ieee: D. Thomas, H. Block, and T. Tröster, “Production of load-adapted lightweight designs by partial hardening,” presented at the 3rd International Conference on Steels in Cars and Trucks (SCT), Salzburg, 2011. mla: Thomas, D., et al. Production of Load-Adapted Lightweight Designs by Partial Hardening. 2011. short: 'D. Thomas, H. Block, T. Tröster, in: 2011.' conference: end_date: 2011-06-09 location: Salzburg name: 3rd International Conference on Steels in Cars and Trucks (SCT) start_date: 2011-06-05 date_created: 2020-02-24T09:40:38Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Production of load-adapted lightweight designs by partial hardening type: conference user_id: '72008' year: '2011' ... --- _id: '15992' author: - first_name: B. full_name: Gorny, B. last_name: Gorny - first_name: T. full_name: Niendorf, T. last_name: Niendorf - first_name: J. full_name: Lackmann, J. last_name: Lackmann - first_name: M. full_name: Thoene, M. last_name: Thoene - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: H.J. full_name: Maier, H.J. last_name: Maier citation: ama: 'Gorny B, Niendorf T, Lackmann J, Thoene M, Tröster T, Maier HJ. In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Materials Science and Engineering: A. 2011;528(27):7962-7967. doi:10.1016/j.msea.2011.07.026' apa: 'Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Tröster, T., & Maier, H. J. (2011). In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Materials Science and Engineering: A, 528(27), 7962–7967. https://doi.org/10.1016/j.msea.2011.07.026' bibtex: '@article{Gorny_Niendorf_Lackmann_Thoene_Tröster_Maier_2011, title={In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting}, volume={528}, DOI={10.1016/j.msea.2011.07.026}, number={27}, journal={Materials Science and Engineering: A}, author={Gorny, B. and Niendorf, T. and Lackmann, J. and Thoene, M. and Tröster, Thomas and Maier, H.J.}, year={2011}, pages={7962–7967} }' chicago: 'Gorny, B., T. Niendorf, J. Lackmann, M. Thoene, Thomas Tröster, and H.J. Maier. “In Situ Characterization of the Deformation and Failure Behavior of Non-Stochastic Porous Structures Processed by Selective Laser Melting.” Materials Science and Engineering: A 528, no. 27 (2011): 7962–67. https://doi.org/10.1016/j.msea.2011.07.026.' ieee: 'B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, and H. J. Maier, “In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting,” Materials Science and Engineering: A, vol. 528, no. 27, pp. 7962–7967, 2011.' mla: 'Gorny, B., et al. “In Situ Characterization of the Deformation and Failure Behavior of Non-Stochastic Porous Structures Processed by Selective Laser Melting.” Materials Science and Engineering: A, vol. 528, no. 27, 2011, pp. 7962–67, doi:10.1016/j.msea.2011.07.026.' short: 'B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, H.J. Maier, Materials Science and Engineering: A 528 (2011) 7962–7967.' date_created: 2020-02-24T09:52:00Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.1016/j.msea.2011.07.026 intvolume: ' 528' issue: '27' language: - iso: eng page: 7962-7967 publication: 'Materials Science and Engineering: A' publication_identifier: issn: - 0921-5093 publication_status: published status: public title: In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting type: journal_article user_id: '72008' volume: 528 year: '2011' ... --- _id: '15993' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Lauter C, Frantz M, Tröster T. Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen. Lightweight Design. 2011;4:48-54. apa: Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen. Lightweight Design, 4, 48–54. bibtex: '@article{Lauter_Frantz_Tröster_2011, title={Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen}, volume={4}, journal={Lightweight Design}, author={Lauter, Christian and Frantz, Meike and Tröster, Thomas}, year={2011}, pages={48–54} }' chicago: 'Lauter, Christian, Meike Frantz, and Thomas Tröster. “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen.” Lightweight Design 4 (2011): 48–54.' ieee: C. Lauter, M. Frantz, and T. Tröster, “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen,” Lightweight Design, vol. 4, pp. 48–54, 2011. mla: Lauter, Christian, et al. “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen.” Lightweight Design, vol. 4, 2011, pp. 48–54. short: C. Lauter, M. Frantz, T. Tröster, Lightweight Design 4 (2011) 48–54. date_created: 2020-02-24T09:56:36Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' intvolume: ' 4' language: - iso: ger page: 48-54 publication: Lightweight Design status: public title: Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen type: journal_article user_id: '72008' volume: 4 year: '2011' ... --- _id: '15996' author: - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Frantz M, Lauter C, Tröster T. Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP. In: ; 2011.' apa: Frantz, M., Lauter, C., & Tröster, T. (2011). Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP. Presented at the 56th International Scientific Colloquium (56th IWK), Ilmenau. bibtex: '@inproceedings{Frantz_Lauter_Tröster_2011, title={Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP}, author={Frantz, Meike and Lauter, Christian and Tröster, Thomas}, year={2011} }' chicago: Frantz, Meike, Christian Lauter, and Thomas Tröster. “Advanced Manufacturing Technologies for Automotive Structures in Multi-Material Design Consisting of High-Strength Steels and CFRP,” 2011. ieee: M. Frantz, C. Lauter, and T. Tröster, “Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP,” presented at the 56th International Scientific Colloquium (56th IWK), Ilmenau, 2011. mla: Frantz, Meike, et al. Advanced Manufacturing Technologies for Automotive Structures in Multi-Material Design Consisting of High-Strength Steels and CFRP. 2011. short: 'M. Frantz, C. Lauter, T. Tröster, in: 2011.' conference: end_date: 2011-09-16 location: Ilmenau name: 56th International Scientific Colloquium (56th IWK) start_date: 2011-09-12 date_created: 2020-02-24T10:16:34Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP type: conference user_id: '72008' year: '2011' ... --- _id: '15997' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: Thorsten full_name: Marten, Thorsten id: '338' last_name: Marten - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: G. full_name: Bach, G. last_name: Bach - first_name: G. full_name: Seliger, G. last_name: Seliger citation: ama: 'Lauter C, Frantz M, Marten T, Tröster T, Bach G, Seliger G. Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe. 2011;(09/2011).' apa: 'Lauter, C., Frantz, M., Marten, T., Tröster, T., Bach, G., & Seliger, G. (2011). Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (09/2011).' bibtex: '@article{Lauter_Frantz_Marten_Tröster_Bach_Seliger_2011, title={Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen}, number={09/2011}, journal={Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe}, publisher={Springer-VDI-Verlag}, author={Lauter, Christian and Frantz, Meike and Marten, Thorsten and Tröster, Thomas and Bach, G. and Seliger, G.}, year={2011} }' chicago: 'Lauter, Christian, Meike Frantz, Thorsten Marten, Thomas Tröster, G. Bach, and G. Seliger. “Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 09/2011 (2011).' ieee: 'C. Lauter, M. Frantz, T. Marten, T. Tröster, G. Bach, and G. Seliger, “Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen,” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 09/2011, 2011.' mla: 'Lauter, Christian, et al. “Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 09/2011, Springer-VDI-Verlag, 2011.' short: 'C. Lauter, M. Frantz, T. Marten, T. Tröster, G. Bach, G. Seliger, Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe (2011).' date_created: 2020-02-24T10:27:15Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' issue: 09/2011 language: - iso: ger publication: 'Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe' publisher: Springer-VDI-Verlag status: public title: Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen type: journal_article user_id: '72008' year: '2011' ... --- _id: '15998' author: - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Frantz M, Lauter C, Tröster T. Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe. 2011;(10/2011).' apa: 'Frantz, M., Lauter, C., & Tröster, T. (2011). Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (10/2011).' bibtex: '@article{Frantz_Lauter_Tröster_2011, title={Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen}, number={10/2011}, journal={Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe}, publisher={Springer-VDI-Verlag}, author={Frantz, Meike and Lauter, Christian and Tröster, Thomas}, year={2011} }' chicago: 'Frantz, Meike, Christian Lauter, and Thomas Tröster. “Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 10/2011 (2011).' ieee: 'M. Frantz, C. Lauter, and T. Tröster, “Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen,” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 10/2011, 2011.' mla: 'Frantz, Meike, et al. “Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 10/2011, Springer-VDI-Verlag, 2011.' short: 'M. Frantz, C. Lauter, T. Tröster, Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe (2011).' date_created: 2020-02-24T10:28:35Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' issue: 10/2011 language: - iso: ger publication: 'Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe' publisher: Springer-VDI-Verlag status: public title: Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen type: journal_article user_id: '72008' year: '2011' ... --- _id: '16002' author: - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Christian full_name: Lauter, Christian last_name: Lauter citation: ama: 'Tröster T, Lauter C. Hybridstrukturen für den automobilen Leichtbau. In: ; 2011.' apa: Tröster, T., & Lauter, C. (2011). Hybridstrukturen für den automobilen Leichtbau. Presented at the 3. Forum zum Thema “Multi Material Design (MMD) für Leichtbauanwendungen,” Landshut. bibtex: '@inproceedings{Tröster_Lauter_2011, title={Hybridstrukturen für den automobilen Leichtbau}, author={Tröster, Thomas and Lauter, Christian}, year={2011} }' chicago: Tröster, Thomas, and Christian Lauter. “Hybridstrukturen für den automobilen Leichtbau,” 2011. ieee: T. Tröster and C. Lauter, “Hybridstrukturen für den automobilen Leichtbau,” presented at the 3. Forum zum Thema “Multi Material Design (MMD) für Leichtbauanwendungen,” Landshut, 2011. mla: Tröster, Thomas, and Christian Lauter. Hybridstrukturen für den automobilen Leichtbau. 2011. short: 'T. Tröster, C. Lauter, in: 2011.' conference: end_date: 2011-10-25 location: Landshut name: 3. Forum zum Thema "Multi Material Design (MMD) für Leichtbauanwendungen" start_date: 2011-10-25 date_created: 2020-02-24T10:37:19Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger status: public title: Hybridstrukturen für den automobilen Leichtbau type: conference user_id: '72008' year: '2011' ... --- _id: '16013' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Lauter C, Frantz M, Tröster T. Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen. Lightweight Design. 2011;4:48-54. doi:10.1365/s35725-011-0044-5 apa: Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen. Lightweight Design, 4, 48–54. https://doi.org/10.1365/s35725-011-0044-5 bibtex: '@article{Lauter_Frantz_Tröster_2011, title={Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen}, volume={4}, DOI={10.1365/s35725-011-0044-5}, journal={Lightweight Design}, author={Lauter, Christian and Frantz, Meike and Tröster, Thomas}, year={2011}, pages={48–54} }' chicago: 'Lauter, Christian, Meike Frantz, and Thomas Tröster. “Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen.” Lightweight Design 4 (2011): 48–54. https://doi.org/10.1365/s35725-011-0044-5.' ieee: C. Lauter, M. Frantz, and T. Tröster, “Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen,” Lightweight Design, vol. 4, pp. 48–54, 2011. mla: Lauter, Christian, et al. “Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen.” Lightweight Design, vol. 4, 2011, pp. 48–54, doi:10.1365/s35725-011-0044-5. short: C. Lauter, M. Frantz, T. Tröster, Lightweight Design 4 (2011) 48–54. date_created: 2020-02-24T12:45:32Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.1365/s35725-011-0044-5 intvolume: ' 4' language: - iso: ger page: 48-54 publication: Lightweight Design publication_identifier: issn: - 1865-4819 - 2192-8738 publication_status: published status: public title: Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen type: journal_article user_id: '72008' volume: 4 year: '2011' ... --- _id: '16000' author: - first_name: Thorsten full_name: Marten, Thorsten id: '338' last_name: Marten - first_name: J. full_name: Niewel, J. last_name: Niewel - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Marten T, Niewel J, Tröster T. Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment and Materials. Published online 2011:309-315. doi:10.3139/105.110119 apa: Marten, T., Niewel, J., & Tröster, T. (2011). Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment and Materials, 309–315. https://doi.org/10.3139/105.110119 bibtex: '@article{Marten_Niewel_Tröster_2011, title={Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess}, DOI={10.3139/105.110119}, journal={HTM Journal of Heat Treatment and Materials}, author={Marten, Thorsten and Niewel, J. and Tröster, Thomas}, year={2011}, pages={309–315} }' chicago: Marten, Thorsten, J. Niewel, and Thomas Tröster. “Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess.” HTM Journal of Heat Treatment and Materials, 2011, 309–15. https://doi.org/10.3139/105.110119. ieee: 'T. Marten, J. Niewel, and T. Tröster, “Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess,” HTM Journal of Heat Treatment and Materials, pp. 309–315, 2011, doi: 10.3139/105.110119.' mla: Marten, Thorsten, et al. “Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess.” HTM Journal of Heat Treatment and Materials, 2011, pp. 309–15, doi:10.3139/105.110119. short: T. Marten, J. Niewel, T. Tröster, HTM Journal of Heat Treatment and Materials (2011) 309–315. date_created: 2020-02-24T10:33:12Z date_updated: 2022-04-19T13:51:51Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.3139/105.110119 language: - iso: ger page: 309-315 publication: HTM Journal of Heat Treatment and Materials publication_identifier: issn: - 1867-2493 - 2194-1831 publication_status: published quality_controlled: '1' status: public title: Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess type: journal_article user_id: '338' year: '2011' ...