---
_id: '22376'
author:
- first_name: Guido
  full_name: Adam, Guido
  last_name: Adam
citation:
  ama: 'Adam G. Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung,
    Lehre. In: ; 2013.'
  apa: Adam, G. (2013). Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung,
    Lehre.
  bibtex: '@inproceedings{Adam_2013, title={Konstruktionsregeln für additive Fertigungsverfahren
    - Ausbildung, Lehre}, author={Adam, Guido}, year={2013} }'
  chicago: Adam, Guido. “Konstruktionsregeln Für Additive Fertigungsverfahren - Ausbildung,
    Lehre,” 2013.
  ieee: G. Adam, “Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung,
    Lehre,” 2013.
  mla: Adam, Guido. <i>Konstruktionsregeln Für Additive Fertigungsverfahren - Ausbildung,
    Lehre</i>. 2013.
  short: 'G. Adam, in: 2013.'
date_created: 2021-06-15T11:08:59Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
status: public
title: Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre
type: conference
user_id: '38077'
year: '2013'
...
---
_id: '21682'
abstract:
- lang: eng
  text: At first sight the direct costs of Additive Manufacturing (AM) seem too high
    in comparison to traditional manufacturing. Considering the whole lifecycle costs
    of parts changes the point of view. Due to the modification of the new production
    process and new supply chains during a parts lifecycle, producing companies can
    strongly benefit from AM. Therefore, a costing model for assessing lifecycle costs
    with regard to specific applications and branches has been developed. The costing
    model represents the advantages of AM monetarily. For the evaluation of this model
    and the influence factors, different case studies have been performed including
    different approaches in part redesign. Deeper research is and will be carried
    out with respect to the AM building rates and the comparability of various AM
    machines, as these facts are hardly comparable for end users. This paper will
    present the methodology and some results of the case studies conducted over the
    whole product lifecycle.
author:
- first_name: C.
  full_name: Lindemann, C.
  last_name: Lindemann
- first_name: U.
  full_name: Jahnke, U.
  last_name: Jahnke
- first_name: M.
  full_name: Moi, M.
  last_name: Moi
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Impact and Influence Factors of Additive
    Manufacturing on Product Lifecycle Costs. In: <i>24th Annual International Solid
    Freeform Fabrication Symposium</i>. Vol 24. ; 2013:998-1008. doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>'
  apa: Lindemann, C., Jahnke, U., Moi, M., &#38; Koch, R. (2013). Impact and Influence
    Factors of Additive Manufacturing on Product Lifecycle Costs. In <i>24th Annual
    International Solid Freeform Fabrication Symposium</i> (Vol. 24, pp. 998–1008).
    <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>
  bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2013, title={Impact and Influence
    Factors of Additive Manufacturing on Product Lifecycle Costs}, volume={24}, DOI={<a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>},
    booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
    C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2013}, pages={998–1008} }'
  chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Impact and Influence Factors
    of Additive Manufacturing on Product Lifecycle Costs.” In <i>24th Annual International
    Solid Freeform Fabrication Symposium</i>, 24:998–1008, 2013. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>.
  ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Impact and Influence Factors
    of Additive Manufacturing on Product Lifecycle Costs,” in <i>24th Annual International
    Solid Freeform Fabrication Symposium</i>, 2013, vol. 24, pp. 998–1008.
  mla: Lindemann, C., et al. “Impact and Influence Factors of Additive Manufacturing
    on Product Lifecycle Costs.” <i>24th Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 24, 2013, pp. 998–1008, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>.
  short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International
    Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.'
date_created: 2021-04-21T06:40:35Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf
intvolume: '        24'
language:
- iso: eng
page: 998-1008
publication: 24th Annual International Solid Freeform Fabrication Symposium
publication_identifier:
  isbn:
  - 1053-2153
status: public
title: Impact and Influence Factors of Additive Manufacturing on Product Lifecycle
  Costs
type: conference
user_id: '55833'
volume: 24
year: '2013'
...
---
_id: '22017'
abstract:
- lang: eng
  text: Fused Deposition Modeling (FDM) parts are typically subject to process-related
    rough or wavy surfaces, with stair-stepping effects whenever the parts produced
    have sloped or rounded part geometries; however, the level of optical quality
    frequently required demands that parts feature a smooth surface. In this paper,
    the results of a high-energy finishing process, which uses a disc finishing unit
    and is designed for parts manufactured with the material Ultem*9085, are presented.
    The analysis discusses the surface-smoothing effect of various finishing materials
    with varying geometries, as well as the effect of finishing time and speed. Additionally,
    the efficiency of the surface treatment has been analyzed specifically at corners,
    edges and in cavities.
author:
- first_name: M.
  full_name: Fischer, M.
  last_name: Fischer
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Fischer M, Schöppner V. Some Investigations Regarding the Surface Treatment
    of Ultem 9085 Parts Manufactured with Fused Deposition Modeling. In: <i>24th Annual
    International Solid Freeform Fabrication Symposium</i>. Vol 24. ; 2013:805-815.
    doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>'
  apa: Fischer, M., &#38; Schöppner, V. (2013). Some Investigations Regarding the
    Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.
    <i>24th Annual International Solid Freeform Fabrication Symposium</i>, <i>24</i>,
    805–815. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>
  bibtex: '@inproceedings{Fischer_Schöppner_2013, title={Some Investigations Regarding
    the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling},
    volume={24}, DOI={<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>},
    booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Fischer,
    M. and Schöppner, Volker}, year={2013}, pages={805–815} }'
  chicago: Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface
    Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.” In
    <i>24th Annual International Solid Freeform Fabrication Symposium</i>, 24:805–15,
    2013. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>.
  ieee: 'M. Fischer and V. Schöppner, “Some Investigations Regarding the Surface Treatment
    of Ultem 9085 Parts Manufactured with Fused Deposition Modeling,” in <i>24th Annual
    International Solid Freeform Fabrication Symposium</i>, 2013, vol. 24, pp. 805–815,
    doi: <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>.'
  mla: Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface
    Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.” <i>24th
    Annual International Solid Freeform Fabrication Symposium</i>, vol. 24, 2013,
    pp. 805–15, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>.
  short: 'M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication
    Symposium, 2013, pp. 805–815.'
date_created: 2021-05-07T13:22:55Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf
intvolume: '        24'
language:
- iso: eng
page: 805-815
publication: 24th Annual International Solid Freeform Fabrication Symposium
status: public
title: Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured
  with Fused Deposition Modeling
type: conference
user_id: '70729'
volume: 24
year: '2013'
...
---
_id: '42097'
author:
- first_name: 'Tobias '
  full_name: 'Becker, Tobias '
  last_name: Becker
citation:
  ama: 'Becker T. <i>Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
    von Führungsprozessen Durch Interaktive SOPs </i>.; 2013.'
  apa: 'Becker, T. (2013). <i>Qualitätsmanagement in der zivilen Gefahrenabwehr :
    Optimierung von Führungsprozessen durch interaktive SOPs </i>.'
  bibtex: '@book{Becker_2013, title={Qualitätsmanagement in der zivilen Gefahrenabwehr :
    Optimierung von Führungsprozessen durch interaktive SOPs }, author={Becker, Tobias
    }, year={2013} }'
  chicago: 'Becker, Tobias . <i>Qualitätsmanagement in Der Zivilen Gefahrenabwehr :
    Optimierung von Führungsprozessen Durch Interaktive SOPs </i>, 2013.'
  ieee: 'T. Becker, <i>Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung
    von Führungsprozessen durch interaktive SOPs </i>. 2013.'
  mla: 'Becker, Tobias. <i>Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
    von Führungsprozessen Durch Interaktive SOPs </i>. 2013.'
  short: 'T. Becker, Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
    von Führungsprozessen Durch Interaktive SOPs , 2013.'
date_created: 2023-02-14T12:46:54Z
date_updated: 2023-02-14T12:47:00Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
language:
- iso: eng
- iso: ger
main_file_link:
- url: https://digital.ub.uni-paderborn.de/ubpb/urn/urn:nbn:de:hbz:466:2-12597
page: '181'
status: public
supervisor:
- first_name: Rainer
  full_name: Koch, Rainer
  last_name: Koch
title: 'Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung von Führungsprozessen
  durch interaktive SOPs '
type: dissertation
user_id: '55833'
year: '2013'
...
---
_id: '22174'
abstract:
- lang: eng
  text: The quality of laser sintered parts, in this work, manufactured by polymer
    laser sintering by using an EOSINT P395 Laser Sintering system, depends on several
    steps along the process chain. The first step is the characterization of the powder
    quality, whereas the rheological and physical investigations of nylon 12 powder
    are shown. By changing some important influencing factors, for example the powder
    ratio, the powder ageing and the moisture content, the influence on mechanical
    and physical properties, density and porosity, are investigated. The composition
    of the used powder is known. The previous process (storage conditions, etc.) as
    well as the laser sintering process (regarding energy density, temperature, etc.)
    is kept constant for the duration of this work. Regarding the post process in
    this work the cooling down phase is investigated as well. With an automatically
    blasting system it is possible to keep the post process parameters blasting distance
    and blasting time, constant. All of the tests will be performed using dry and
    conditioned test specimens. This work is showing the dependence on mechanical,
    rheological and physical parameters by varying important influencing factors along
    the laser sintering process quality chain.
author:
- first_name: Stefan
  full_name: Rüsenberg, Stefan
  last_name: Rüsenberg
- first_name: R.
  full_name: Weiffen, R.
  last_name: Weiffen
- first_name: F.
  full_name: Knoop, F.
  last_name: Knoop
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Rüsenberg S, Weiffen R, Knoop F, Schmid H-J. Controlling the Quality of Laser
    Sintered Parts Along the Process Chain. In: <i>23rd Annual International Solid
    Freeform Fabrication Symposium</i>. Vol 23. ; 2012:1024-1044. doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf</a>'
  apa: Rüsenberg, S., Weiffen, R., Knoop, F., &#38; Schmid, H.-J. (2012). Controlling
    the Quality of Laser Sintered Parts Along the Process Chain. In <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i> (Vol. 23, pp. 1024–1044).
    <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf</a>
  bibtex: '@inproceedings{Rüsenberg_Weiffen_Knoop_Schmid_2012, title={Controlling
    the Quality of Laser Sintered Parts Along the Process Chain}, volume={23}, DOI={<a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf</a>},
    booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Rüsenberg,
    Stefan and Weiffen, R. and Knoop, F. and Schmid, Hans-Joachim}, year={2012}, pages={1024–1044}
    }'
  chicago: Rüsenberg, Stefan, R. Weiffen, F. Knoop, and Hans-Joachim Schmid. “Controlling
    the Quality of Laser Sintered Parts Along the Process Chain.” In <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i>, 23:1024–44, 2012. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf</a>.
  ieee: S. Rüsenberg, R. Weiffen, F. Knoop, and H.-J. Schmid, “Controlling the Quality
    of Laser Sintered Parts Along the Process Chain,” in <i>23rd Annual International
    Solid Freeform Fabrication Symposium</i>, 2012, vol. 23, pp. 1024–1044.
  mla: Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts
    Along the Process Chain.” <i>23rd Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 23, 2012, pp. 1024–44, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf</a>.
  short: 'S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International
    Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.'
date_created: 2021-05-14T07:46:03Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
intvolume: '        23'
language:
- iso: eng
page: 1024-1044
publication: 23rd Annual International Solid Freeform Fabrication Symposium
status: public
title: Controlling the Quality of Laser Sintered Parts Along the Process Chain
type: conference
user_id: '71545'
volume: 23
year: '2012'
...
---
_id: '22204'
abstract:
- lang: eng
  text: Material properties of parts from additive manufacturing are influenced by
    a huge number of material, operational and job parameters. This work aims to identify
    the most important ones and to investigate mechanical properties as depending
    on those parameters. Test specimens were produced with standard PA12 powder on
    an EOSINT P390 and P395, respectively. The influence of the orientation and placement
    of parts in the building chamber were investigated systematically. The mechanical
    properties
author:
- first_name: Stefan
  full_name: Rüsenberg, Stefan
  last_name: Rüsenberg
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Rüsenberg S, Schmid H-J. Mechanical Properties as a Result of multitude of
    Parameters. In: <i>The European Forum on Additive Manufacturing</i>. Vol 17. ;
    2012. doi:<a href="https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf">https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf</a>'
  apa: Rüsenberg, S., &#38; Schmid, H.-J. (2012). Mechanical Properties as a Result
    of multitude of Parameters. In <i>The European Forum on Additive Manufacturing</i>
    (Vol. 17). <a href="https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf">https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf</a>
  bibtex: '@inproceedings{Rüsenberg_Schmid_2012, title={Mechanical Properties as a
    Result of multitude of Parameters}, volume={17}, DOI={<a href="https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf">https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf</a>},
    booktitle={The European Forum on Additive Manufacturing}, author={Rüsenberg, Stefan
    and Schmid, Hans-Joachim}, year={2012} }'
  chicago: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a
    Result of Multitude of Parameters.” In <i>The European Forum on Additive Manufacturing</i>,
    Vol. 17, 2012. <a href="https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf">https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf</a>.
  ieee: S. Rüsenberg and H.-J. Schmid, “Mechanical Properties as a Result of multitude
    of Parameters,” in <i>The European Forum on Additive Manufacturing</i>, 2012,
    vol. 17.
  mla: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result
    of Multitude of Parameters.” <i>The European Forum on Additive Manufacturing</i>,
    vol. 17, 2012, doi:<a href="https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf">https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf</a>.
  short: 'S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing,
    2012.'
date_created: 2021-05-14T07:46:38Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
intvolume: '        17'
language:
- iso: eng
publication: The European Forum on Additive Manufacturing
status: public
title: Mechanical Properties as a Result of multitude of Parameters
type: conference
user_id: '71545'
volume: 17
year: '2012'
...
---
_id: '22364'
author:
- first_name: Guido
  full_name: Adam, Guido
  last_name: Adam
- first_name: Detmar
  full_name: Zimmer, Detmar
  last_name: Zimmer
citation:
  ama: 'Adam G, Zimmer D. Elementbasierte Erarbeitung von Konstruktionsregeln für
    additive Fertigung. In: ; 2012.'
  apa: Adam, G., &#38; Zimmer, D. (2012). Elementbasierte Erarbeitung von Konstruktionsregeln
    für additive Fertigung.
  bibtex: '@inproceedings{Adam_Zimmer_2012, title={Elementbasierte Erarbeitung von
    Konstruktionsregeln für additive Fertigung}, author={Adam, Guido and Zimmer, Detmar},
    year={2012} }'
  chicago: Adam, Guido, and Detmar Zimmer. “Elementbasierte Erarbeitung von Konstruktionsregeln
    Für Additive Fertigung,” 2012.
  ieee: G. Adam and D. Zimmer, “Elementbasierte Erarbeitung von Konstruktionsregeln
    für additive Fertigung,” 2012.
  mla: Adam, Guido, and Detmar Zimmer. <i>Elementbasierte Erarbeitung von Konstruktionsregeln
    Für Additive Fertigung</i>. 2012.
  short: 'G. Adam, D. Zimmer, in: 2012.'
date_created: 2021-06-15T11:08:45Z
date_updated: 2022-01-06T06:55:31Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
status: public
title: Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung
type: conference
user_id: '38077'
year: '2012'
...
---
_id: '21680'
abstract:
- lang: eng
  text: The costs of additive manufactured parts often seem too high in comparison
    to those of traditionally manufactured parts, as the information about major cost
    drivers, especially for additive manufactured metal parts, is weak. Therefore,
    a lifecycle analysis of additive manufactured parts is needed to understand and
    rate the cost drivers that act as the largest contributors to unit costs, and
    to provide a focus for future cost reduction activities for the Additive Manufacturing
    (AM) technology. A better understanding of the cost structure will help to compare
    the AM costs with the opportunity costs of the classical manufacturing technologies
    and will make it easier to justify the use of AM manufactured parts. This paper
    will present work in progress and methodology based on a sample investigated with
    business process analysis / simulation and activity based costing. In addition,
    cost drivers associated with metal AM process will be rated.
author:
- first_name: C.
  full_name: Lindemann, C.
  last_name: Lindemann
- first_name: U.
  full_name: Jahnke, U.
  last_name: Jahnke
- first_name: M.
  full_name: Moi, M.
  last_name: Moi
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Analyzing Product Lifecycle Costs for
    a Better Understanding of Cost Drivers in Additve Manufacturing. In: <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i>. Vol 23. ; 2012:177-188.
    doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>'
  apa: Lindemann, C., Jahnke, U., Moi, M., &#38; Koch, R. (2012). Analyzing Product
    Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.
    In <i>23rd Annual International Solid Freeform Fabrication Symposium</i> (Vol.
    23, pp. 177–188). <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>
  bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2012, title={Analyzing Product
    Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing},
    volume={23}, DOI={<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>},
    booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
    C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2012}, pages={177–188} }'
  chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Analyzing Product Lifecycle
    Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.” In
    <i>23rd Annual International Solid Freeform Fabrication Symposium</i>, 23:177–88,
    2012. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>.
  ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle
    Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in
    <i>23rd Annual International Solid Freeform Fabrication Symposium</i>, 2012, vol.
    23, pp. 177–188.
  mla: Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding
    of Cost Drivers in Additve Manufacturing.” <i>23rd Annual International Solid
    Freeform Fabrication Symposium</i>, vol. 23, 2012, pp. 177–88, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>.
  short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International
    Solid Freeform Fabrication Symposium, 2012, pp. 177–188.'
date_created: 2021-04-21T06:34:46Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
intvolume: '        23'
language:
- iso: eng
page: 177-188
publication: 23rd Annual International Solid Freeform Fabrication Symposium
publication_identifier:
  isbn:
  - 1053-2153
status: public
title: Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers
  in Additve Manufacturing
type: conference
user_id: '55833'
volume: 23
year: '2012'
...
---
_id: '22016'
abstract:
- lang: eng
  text: Relating to the direct manufacturing of end-use parts the knowledge about
    the effect of the long-term ageing of Fused Deposition Modeling (FDM) parts is
    of particular importance. For this, tensile specimens were stored for time periods
    of up to 52 weeks in two different conditions and the testing was conducted at
    different temperatures within a temperature range of -60°C to +160°C. Further
    tests were made after the exposure in multiple media. The parts were built up
    with the system “Fortus 400mc” from Stratasys with the material Ultem*9085 in
    two different build directions, the strongest direction X (on its side) and the
    weakest build direction Z (upright) and with the standard toolpath parameters
    of the Insight software version 7.0.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. Long-Term ageing effects on Fused Deposition
    Modeling Parts manufactured with ULTEM*9085. In: <i>23rd Annual International
    Solid Freeform Fabrication Symposium</i>. Vol 23. ; 2012:629-640. doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2012). Long-Term ageing effects
    on Fused Deposition Modeling Parts manufactured with ULTEM*9085. <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i>, <i>23</i>, 629–640. <a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Long-Term ageing effects
    on Fused Deposition Modeling Parts manufactured with ULTEM*9085}, volume={23},
    DOI={<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>},
    booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Bagsik,
    A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={629–640} }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Long-Term Ageing Effects on
    Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i>, 23:629–40, 2012. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>.
  ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused
    Deposition Modeling Parts manufactured with ULTEM*9085,” in <i>23rd Annual International
    Solid Freeform Fabrication Symposium</i>, 2012, vol. 23, pp. 629–640, doi: <a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>.'
  mla: Bagsik, A., et al. “Long-Term Ageing Effects on Fused Deposition Modeling Parts
    Manufactured with ULTEM*9085.” <i>23rd Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 23, 2012, pp. 629–40, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform
    Fabrication Symposium, 2012, pp. 629–640.'
date_created: 2021-05-07T13:22:54Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
intvolume: '        23'
language:
- iso: eng
page: 629-640
publication: 23rd Annual International Solid Freeform Fabrication Symposium
status: public
title: Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with
  ULTEM*9085
type: conference
user_id: '70729'
volume: 23
year: '2012'
...
---
_id: '22164'
abstract:
- lang: eng
  text: Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is "Fused Deposition Modeling" (FDM). It is one of
    the most used additive manufacturing processes to produce prototypes and end-use
    parts. From a 3D-CAD data set, components and assemblies are manufactured out
    of thermoplastic material layer by layer by means of an additive process. An extrusion
    head deposits the molten thermoplastic filament to create each layer with a particular
    tool path. Due to the thermal fusion the material bonds with the layer beneath
    and solidifies. Thus a permanent bonding of two layers is formed. In this paper
    the mechanical data of parts, manufactured with the system Fortus 400mc from Stratasys
    with the material Ultem*9085 are presented. Tensile and flexural tests according
    to both, the ASTM and the ISO standard, are conducted. Test specimens are generated
    with the standard parameters of the native software in different build directions.
    The tests show different strength and strain characteristics that depend on the
    given structure as a result of the build direction. Furthermore tensile specimens
    according to the ASTM standard are generated with changed parameters of the native
    software to increase the mechanical strength properties. The results are compared
    to injection molded strength properties.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. Tensile and Flexural Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085. In: <i>1st International Conference
    on Thermo-Mechanically Graded Materials</i>. Vol 1. ; 2012:129-134.'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2012). Tensile and Flexural Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, <i>1</i>, 129–134.
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Tensile and Flexural
    Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085}, volume={1},
    booktitle={1st International Conference on Thermo-Mechanically Graded Materials},
    author={Bagsik, A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={129–134}
    }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Tensile and Flexural Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, 1:129–34, 2012.
  ieee: A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of
    Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, 2012, vol. 1, pp. 129–134.
  mla: Bagsik, A., et al. “Tensile and Flexural Properties of Fused Deposition Modeling
    Parts Manufactured with ULTEM*9085.” <i>1st International Conference on Thermo-Mechanically
    Graded Materials</i>, vol. 1, 2012, pp. 129–34.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically
    Graded Materials, 2012, pp. 129–134.'
date_created: 2021-05-14T07:24:35Z
date_updated: 2022-04-25T07:58:51Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
intvolume: '         1'
language:
- iso: eng
page: 129-134
publication: 1st International Conference on Thermo-Mechanically Graded Materials
publication_identifier:
  isbn:
  - '9783942267588'
quality_controlled: '1'
status: public
title: Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured
  with ULTEM*9085
type: conference
user_id: '70729'
volume: 1
year: '2012'
...
---
_id: '22024'
abstract:
- lang: eng
  text: 'Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is “Fused Deposition Modeling” (FDM). It is one of
    the most used additive manufacturing processes to produce prototypes and end-use
    parts. From a 3D-CAD data set, components and assemblies are manufactured out
    of thermoplastic material layer by layer by means of an additive process. An extrusion
    head deposits the molten thermoplastic filament to create each layer with a particular
    tool path. In this paper the mechanical data of parts, manufactured with the system
    Fortus 400mc from Stratasys with the material Ultem*9085 are presented. Tensile
    specimens are generated with the standard parameters as well as with changed parameters
    of the native software to analyze the influence of these parameters on the mechanical
    strength properties. The tensile tests show different strength and strain characteristics
    that depend on the given structure and as a result of the build direction. Furthermore
    the toolpath parameters have an effect on the strength characteristics and the
    break behavior. In addition, tensile specimens are tested under the influence
    of different temperatures and after a thermal cycling. '
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. Extensive Analysis of the mechanical strength
    properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085. In:
    <i>5th International Conference on Polymer and Mould Innovations</i>. Vol 5. Centre
    for Polymer and Material Technology, Univ. College, Ghent Univ.; 2012:266-272.
    doi:<a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2012). Extensive Analysis of the
    mechanical strength properties of Fused Deposition Modeling Parts manufactured
    with ULTEM 9085. <i>5th International Conference on Polymer and Mould Innovations</i>,
    <i>5</i>, 266–272. <a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, place={Ghent}, title={Extensive
    Analysis of the mechanical strength properties of Fused Deposition Modeling Parts
    manufactured with ULTEM 9085}, volume={5}, DOI={<a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>},
    booktitle={5th International Conference on Polymer and Mould Innovations}, publisher={Centre
    for Polymer and Material Technology, Univ. College, Ghent Univ.}, author={Bagsik,
    A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={266–272} }'
  chicago: 'Bagsik, A., Volker Schöppner, and E. Klemp. “Extensive Analysis of the
    Mechanical Strength Properties of Fused Deposition Modeling Parts Manufactured
    with ULTEM 9085.” In <i>5th International Conference on Polymer and Mould Innovations</i>,
    5:266–72. Ghent: Centre for Polymer and Material Technology, Univ. College, Ghent
    Univ., 2012. <a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>.'
  ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “Extensive Analysis of the mechanical
    strength properties of Fused Deposition Modeling Parts manufactured with ULTEM
    9085,” in <i>5th International Conference on Polymer and Mould Innovations</i>,
    2012, vol. 5, pp. 266–272, doi: <a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>.'
  mla: Bagsik, A., et al. “Extensive Analysis of the Mechanical Strength Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM 9085.” <i>5th International
    Conference on Polymer and Mould Innovations</i>, vol. 5, Centre for Polymer and
    Material Technology, Univ. College, Ghent Univ., 2012, pp. 266–72, doi:<a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer
    and Mould Innovations, Centre for Polymer and Material Technology, Univ. College,
    Ghent Univ., Ghent, 2012, pp. 266–272.'
date_created: 2021-05-07T13:23:04Z
date_updated: 2022-04-25T08:05:52Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616
intvolume: '         5'
language:
- iso: eng
page: 266-272
place: Ghent
publication: 5th International Conference on Polymer and Mould Innovations
publisher: Centre for Polymer and Material Technology, Univ. College, Ghent Univ.
quality_controlled: '1'
status: public
title: Extensive Analysis of the mechanical strength properties of Fused Deposition
  Modeling Parts manufactured with ULTEM 9085
type: conference
user_id: '70729'
volume: 5
year: '2012'
...
---
_id: '22188'
abstract:
- lang: eng
  text: The aim of this paper is the description and evaluation of physical properties
    like porosity and density and their influence on mechanical properties of laser
    sintered polyamide parts. For example, by reducing the porosity an increase of
    mechanical properties is possible. The correlation of laser parameters to these
    properties is investigated in detail. The energy density is an important parameter
    for the laser sintering process. By changing laser power, scan velocity and hatch
    distance an influence on manufactured components is given. A systematic variation
    of all three laser parameters is performed. A comparison of results obtained at
    constant energy densities obtained by varying these relevant parameters accordingly
    is shown as well.
author:
- first_name: Stefan
  full_name: Rüsenberg, Stefan
  last_name: Rüsenberg
- first_name: L.
  full_name: Schmidt, L.
  last_name: Schmidt
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: 'Rüsenberg S, Schmidt L, Schmid H-J. Mechanical and Physical Properties - A
    Way to asses quality of Laser Sintered Parts. In: <i>22th Annual International
    Solid Freeform Fabrication Symposium</i>. Vol 22. ; 2011:239-251. doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf</a>'
  apa: Rüsenberg, S., Schmidt, L., &#38; Schmid, H.-J. (2011). Mechanical and Physical
    Properties - A Way to asses quality of Laser Sintered Parts. In <i>22th Annual
    International Solid Freeform Fabrication Symposium</i> (Vol. 22, pp. 239–251).
    <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf</a>
  bibtex: '@inproceedings{Rüsenberg_Schmidt_Schmid_2011, title={Mechanical and Physical
    Properties - A Way to asses quality of Laser Sintered Parts}, volume={22}, DOI={<a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf</a>},
    booktitle={22th Annual International Solid Freeform Fabrication Symposium}, author={Rüsenberg,
    Stefan and Schmidt, L. and Schmid, Hans-Joachim}, year={2011}, pages={239–251}
    }'
  chicago: Rüsenberg, Stefan, L. Schmidt, and Hans-Joachim Schmid. “Mechanical and
    Physical Properties - A Way to Asses Quality of Laser Sintered Parts.” In <i>22th
    Annual International Solid Freeform Fabrication Symposium</i>, 22:239–51, 2011.
    <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf</a>.
  ieee: S. Rüsenberg, L. Schmidt, and H.-J. Schmid, “Mechanical and Physical Properties
    - A Way to asses quality of Laser Sintered Parts,” in <i>22th Annual International
    Solid Freeform Fabrication Symposium</i>, 2011, vol. 22, pp. 239–251.
  mla: Rüsenberg, Stefan, et al. “Mechanical and Physical Properties - A Way to Asses
    Quality of Laser Sintered Parts.” <i>22th Annual International Solid Freeform
    Fabrication Symposium</i>, vol. 22, 2011, pp. 239–51, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf</a>.
  short: 'S. Rüsenberg, L. Schmidt, H.-J. Schmid, in: 22th Annual International Solid
    Freeform Fabrication Symposium, 2011, pp. 239–251.'
date_created: 2021-05-14T07:46:19Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf
intvolume: '        22'
language:
- iso: eng
page: 239-251
publication: 22th Annual International Solid Freeform Fabrication Symposium
status: public
title: Mechanical and Physical Properties - A Way to asses quality of Laser Sintered
  Parts
type: conference
user_id: '71545'
volume: 22
year: '2011'
...
---
_id: '22191'
author:
- first_name: Stefan
  full_name: Rüsenberg, Stefan
  last_name: Rüsenberg
- first_name: L.
  full_name: Schmidt, L.
  last_name: Schmidt
- first_name: H.
  full_name: Hosse, H.
  last_name: Hosse
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  id: '464'
  last_name: Schmid
citation:
  ama: Rüsenberg S, Schmidt L, Hosse H, Schmid H-J. <i>Porosity as a Key to Increase
    Material Properties of Laser Sintered Parts</i>.; 2011:531-538. doi:<a href="https://doi.org/10.1201/b11341">10.1201/b11341</a>
  apa: Rüsenberg, S., Schmidt, L., Hosse, H., &#38; Schmid, H.-J. (2011). <i>Porosity
    as a key to increase material properties of laser sintered parts</i> (pp. 531–538).
    <a href="https://doi.org/10.1201/b11341">https://doi.org/10.1201/b11341</a>
  bibtex: '@book{Rüsenberg_Schmidt_Hosse_Schmid_2011, title={Porosity as a key to
    increase material properties of laser sintered parts}, DOI={<a href="https://doi.org/10.1201/b11341">10.1201/b11341</a>},
    author={Rüsenberg, Stefan and Schmidt, L. and Hosse, H. and Schmid, Hans-Joachim},
    year={2011}, pages={531–538} }'
  chicago: Rüsenberg, Stefan, L. Schmidt, H. Hosse, and Hans-Joachim Schmid. <i>Porosity
    as a Key to Increase Material Properties of Laser Sintered Parts</i>, 2011. <a
    href="https://doi.org/10.1201/b11341">https://doi.org/10.1201/b11341</a>.
  ieee: S. Rüsenberg, L. Schmidt, H. Hosse, and H.-J. Schmid, <i>Porosity as a key
    to increase material properties of laser sintered parts</i>. 2011, pp. 531–538.
  mla: Rüsenberg, Stefan, et al. <i>Porosity as a Key to Increase Material Properties
    of Laser Sintered Parts</i>. 2011, pp. 531–38, doi:<a href="https://doi.org/10.1201/b11341">10.1201/b11341</a>.
  short: S. Rüsenberg, L. Schmidt, H. Hosse, H.-J. Schmid, Porosity as a Key to Increase
    Material Properties of Laser Sintered Parts, 2011.
date_created: 2021-05-14T07:46:23Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1201/b11341
language:
- iso: eng
page: 531-538
publication_identifier:
  isbn:
  - 978-0-429-21774-6
status: public
title: Porosity as a key to increase material properties of laser sintered parts
type: book
user_id: '71545'
year: '2011'
...
---
_id: '22358'
author:
- first_name: Guido
  full_name: Adam, Guido
  last_name: Adam
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
citation:
  ama: Adam G, Zimmer D. <i>Direct Manufacturing Design Rules</i>. CRC Press; 2011:545-551.
    doi:<a href="https://doi.org/10.1201/b11341-88">10.1201/b11341-88</a>
  apa: Adam, G., &#38; Zimmer, D. (2011). <i>Direct Manufacturing Design Rules</i>
    (pp. 545–551). CRC Press. <a href="https://doi.org/10.1201/b11341-88">https://doi.org/10.1201/b11341-88</a>
  bibtex: '@book{Adam_Zimmer_2011, title={Direct Manufacturing Design Rules}, DOI={<a
    href="https://doi.org/10.1201/b11341-88">10.1201/b11341-88</a>}, publisher={CRC
    Press}, author={Adam, Guido and Zimmer, Detmar}, year={2011}, pages={545–551}
    }'
  chicago: Adam, Guido, and Detmar Zimmer. <i>Direct Manufacturing Design Rules</i>.
    CRC Press, 2011. <a href="https://doi.org/10.1201/b11341-88">https://doi.org/10.1201/b11341-88</a>.
  ieee: G. Adam and D. Zimmer, <i>Direct Manufacturing Design Rules</i>. CRC Press,
    2011, pp. 545–551.
  mla: Adam, Guido, and Detmar Zimmer. <i>Direct Manufacturing Design Rules</i>. CRC
    Press, 2011, pp. 545–51, doi:<a href="https://doi.org/10.1201/b11341-88">10.1201/b11341-88</a>.
  short: G. Adam, D. Zimmer, Direct Manufacturing Design Rules, CRC Press, 2011.
date_created: 2021-06-15T11:08:38Z
date_updated: 2022-01-06T06:55:31Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1201/b11341-88
language:
- iso: eng
page: 545-551
publication_identifier:
  isbn:
  - 978-0-2031-8141-6
publisher: CRC Press
status: public
title: Direct Manufacturing Design Rules
type: book
user_id: '38077'
year: '2011'
...
---
_id: '22360'
author:
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
- first_name: Guido
  full_name: Adam, Guido
  last_name: Adam
citation:
  ama: 'Zimmer D, Adam G. DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen
    Konstruktionsregeln. In: <i>Rapid.Tech 2011 Fachmesse Und Anwendertagung Für Rapid-Technologie</i>.
    ; 2011.'
  apa: Zimmer, D., &#38; Adam, G. (2011). DMDR Direct Manufacturing Design Rules.
    Erarbeiten von applikationsunabhängigen Konstruktionsregeln. In <i>Rapid.Tech
    2011 Fachmesse und Anwendertagung für Rapid-Technologie</i>.
  bibtex: '@inproceedings{Zimmer_Adam_2011, title={DMDR Direct Manufacturing Design
    Rules. Erarbeiten von applikationsunabhängigen Konstruktionsregeln}, booktitle={Rapid.Tech
    2011 Fachmesse und Anwendertagung für Rapid-Technologie}, author={Zimmer, Detmar
    and Adam, Guido}, year={2011} }'
  chicago: Zimmer, Detmar, and Guido Adam. “DMDR Direct Manufacturing Design Rules.
    Erarbeiten von Applikationsunabhängigen Konstruktionsregeln.” In <i>Rapid.Tech
    2011 Fachmesse Und Anwendertagung Für Rapid-Technologie</i>, 2011.
  ieee: D. Zimmer and G. Adam, “DMDR Direct Manufacturing Design Rules. Erarbeiten
    von applikationsunabhängigen Konstruktionsregeln,” in <i>Rapid.Tech 2011 Fachmesse
    und Anwendertagung für Rapid-Technologie</i>, 2011.
  mla: Zimmer, Detmar, and Guido Adam. “DMDR Direct Manufacturing Design Rules. Erarbeiten
    von Applikationsunabhängigen Konstruktionsregeln.” <i>Rapid.Tech 2011 Fachmesse
    Und Anwendertagung Für Rapid-Technologie</i>, 2011.
  short: 'D. Zimmer, G. Adam, in: Rapid.Tech 2011 Fachmesse Und Anwendertagung Für
    Rapid-Technologie, 2011.'
date_created: 2021-06-15T11:08:40Z
date_updated: 2022-01-06T06:55:31Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: Rapid.Tech 2011 Fachmesse und Anwendertagung für Rapid-Technologie
status: public
title: DMDR Direct Manufacturing Design Rules. Erarbeiten von applikationsunabhängigen
  Konstruktionsregeln
type: conference
user_id: '38077'
year: '2011'
...
---
_id: '22029'
abstract:
- lang: eng
  text: In this work the influence of the orientation and the toolpath generation
    of manufactured parts based on the mechanical data are analyzed. Tensile Specimen
    are generated with the given parameters as well as with changing parameters of
    the native software based upon the CAD data. The parts then are built up with
    the “Fortus 400mc” from Stratasys. First tensile tests show different strength
    and strain characteristics that depend on the given structure and as a result
    of the build direction. The influence of the parameters was analyzed with a statistic
    test method by using the software Design Expert.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Bagsik A, Schöppner V. Mechanical Properties of Fused Deposition Modeling
    Parts Manufactured with ULTEM*9085. In: <i>ANTEC</i>. ; 2011:1294-1298. doi:<a
    href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>'
  apa: Bagsik, A., &#38; Schöppner, V. (2011). Mechanical Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085. <i>ANTEC</i>, 1294–1298. <a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_2011, title={Mechanical Properties of Fused
    Deposition Modeling Parts Manufactured with ULTEM*9085}, DOI={<a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>},
    booktitle={ANTEC}, author={Bagsik, A. and Schöppner, Volker}, year={2011}, pages={1294–1298}
    }'
  chicago: Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085.” In <i>ANTEC</i>, 1294–98, 2011.
    <a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>.
  ieee: 'A. Bagsik and V. Schöppner, “Mechanical Properties of Fused Deposition Modeling
    Parts Manufactured with ULTEM*9085,” in <i>ANTEC</i>, 2011, pp. 1294–1298, doi:
    <a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>.'
  mla: Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085.” <i>ANTEC</i>, 2011, pp. 1294–98,
    doi:<a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>.
  short: 'A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.'
date_created: 2021-05-07T13:23:09Z
date_updated: 2022-04-25T08:04:05Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf
language:
- iso: eng
page: 1294-1298
publication: ANTEC
quality_controlled: '1'
status: public
title: Mechanical Properties of Fused Deposition Modeling Parts Manufactured with
  ULTEM*9085
type: conference
user_id: '70729'
year: '2011'
...
---
_id: '22355'
author:
- first_name: Guido
  full_name: Adam, Guido
  last_name: Adam
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
citation:
  ama: Adam G, Zimmer D. Konstruktionsregeln für additive Fertigung in Lehre und Forschung.
    <i>Newsletter Berliner Kreis</i>. 2010;15:22-23. doi:<a href="https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    ">https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    </a>
  apa: Adam, G., &#38; Zimmer, D. (2010). Konstruktionsregeln für additive Fertigung
    in Lehre und Forschung. <i>Newsletter Berliner Kreis</i>, <i>15</i>, 22–23. <a
    href="https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    ">https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    </a>
  bibtex: '@article{Adam_Zimmer_2010, title={Konstruktionsregeln für additive Fertigung
    in Lehre und Forschung}, volume={15}, DOI={<a href="https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    ">https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    </a>}, journal={Newsletter Berliner Kreis}, author={Adam, Guido and Zimmer, Detmar},
    year={2010}, pages={22–23} }'
  chicago: 'Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigung
    in Lehre Und Forschung.” <i>Newsletter Berliner Kreis</i> 15 (2010): 22–23. <a
    href="https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    ">https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    </a>.'
  ieee: G. Adam and D. Zimmer, “Konstruktionsregeln für additive Fertigung in Lehre
    und Forschung,” <i>Newsletter Berliner Kreis</i>, vol. 15, pp. 22–23, 2010.
  mla: Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigung
    in Lehre Und Forschung.” <i>Newsletter Berliner Kreis</i>, vol. 15, 2010, pp.
    22–23, doi:<a href="https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    ">https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung
    </a>.
  short: G. Adam, D. Zimmer, Newsletter Berliner Kreis 15 (2010) 22–23.
date_created: 2021-06-15T11:08:34Z
date_updated: 2022-01-06T06:55:31Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 'https://www.researchgate.net/publication/274193188_Konstruktionsregeln_fur_additive_Fertigung_in_Lehre_und_Forschung '
intvolume: '        15'
language:
- iso: eng
page: 22-23
publication: Newsletter Berliner Kreis
status: public
title: Konstruktionsregeln für additive Fertigung in Lehre und Forschung
type: journal_article
user_id: '38077'
volume: 15
year: '2010'
...
---
_id: '22050'
abstract:
- lang: eng
  text: Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is “Fused Deposition Modeling” (FDM). From a 3D-CAD
    data set, components and assemblies are manufactured out of thermoplastic material
    in only a few working steps. Native software automatically slices the data, calculates
    the support structures, and creates toolpaths. The parts then are built up layer
    by layer by means of an additive process. An extrusion head deposits the molten
    thermoplastic filament to create each layer. This technology began as a process
    for creating prototype parts; recently it has found new utility in the production
    of manufacturing tools and as a manufacturing process for end-use parts. In order
    to be used as a part for serial production, the components must possess the required
    mechanical properties. To this end, not only is the chosen material relevant,
    but a correct process control is also necessary. An interesting material for the
    aircraft and automotive industry is the material PEI with the trade name Ultem*9085.
    This material should typically be used on FDM-machines for the manufacturing of
    end products. The aim of the research is to determine the present mechanical data
    based on the process control, as well as reproducibility from job to job. In this
    work the influence of the orientation and the structure of the manufactured parts
    based on the mechanical data are analyzed. Sample parts are generated with the
    given parameters of the native software based upon the CAD data. First, specimens
    were analyzed concerning their geometry and configuration. The dimensions and
    weight were measured. The mechanical tests conducted were the tensile and compression
    tests.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. FDM Part Quality Manufactured with ULTEM 9085.
    In: <i>Proceedings of International Conference Polymeric Materials</i>. ; 2010.
    doi:<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2010). FDM Part Quality Manufactured
    with ULTEM 9085. <i>Proceedings of International Conference Polymeric Materials</i>.
    <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2010, title={FDM Part Quality Manufactured
    with ULTEM 9085}, DOI={<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>},
    booktitle={Proceedings of International Conference Polymeric Materials}, author={Bagsik,
    A. and Schöppner, Volker and Klemp, E.}, year={2010} }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “FDM Part Quality Manufactured
    with ULTEM 9085.” In <i>Proceedings of International Conference Polymeric Materials</i>,
    2010. <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.
  ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with
    ULTEM 9085,” 2010, doi: <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.'
  mla: Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.” <i>Proceedings
    of International Conference Polymeric Materials</i>, 2010, doi:<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference
    Polymeric Materials, 2010.'
date_created: 2021-05-07T13:23:34Z
date_updated: 2022-04-25T08:04:26Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
language:
- iso: eng
publication: Proceedings of International Conference Polymeric Materials
publication_identifier:
  isbn:
  - 978-3-868-29282-4
quality_controlled: '1'
status: public
title: FDM Part Quality Manufactured with ULTEM 9085
type: conference
user_id: '70729'
year: '2010'
...
---
_id: '22111'
author:
- first_name: W.
  full_name: Reschetnik, W.
  last_name: Reschetnik
- first_name: J.P.
  full_name: Brüggemann, J.P.
  last_name: Brüggemann
- first_name: G.
  full_name: Kullmer, G.
  last_name: Kullmer
- first_name: L.
  full_name: Risse, L.
  last_name: Risse
citation:
  ama: Reschetnik W, Brüggemann JP, Kullmer G, Risse L. <i>Beeinflussung Des Risswachstums
    Durch Kerben in Additiv Gefertigten Strukturen</i>.
  apa: Reschetnik, W., Brüggemann, J. P., Kullmer, G., &#38; Risse, L. (n.d.). <i>Beeinflussung
    des Risswachstums durch Kerben in additiv gefertigten Strukturen</i>. <i>Additive
    Fertigung von Bauteilen und Strukturen – Neue Erkenntnisse und Praxisbeispiele</i>.
  bibtex: '@book{Reschetnik_Brüggemann_Kullmer_Risse, title={Beeinflussung des Risswachstums
    durch Kerben in additiv gefertigten Strukturen}, journal={Additive Fertigung von
    Bauteilen und Strukturen – Neue Erkenntnisse und Praxisbeispiele}, author={Reschetnik,
    W. and Brüggemann, J.P. and Kullmer, G. and Risse, L.} }'
  chicago: Reschetnik, W., J.P. Brüggemann, G. Kullmer, and L. Risse. <i>Beeinflussung
    Des Risswachstums Durch Kerben in Additiv Gefertigten Strukturen</i>. <i>Additive
    Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele</i>,
    n.d.
  ieee: W. Reschetnik, J. P. Brüggemann, G. Kullmer, and L. Risse, <i>Beeinflussung
    des Risswachstums durch Kerben in additiv gefertigten Strukturen</i>. .
  mla: Reschetnik, W., et al. “Beeinflussung Des Risswachstums Durch Kerben in Additiv
    Gefertigten Strukturen.” <i>Additive Fertigung von Bauteilen Und Strukturen –
    Neue Erkenntnisse Und Praxisbeispiele</i>.
  short: W. Reschetnik, J.P. Brüggemann, G. Kullmer, L. Risse, Beeinflussung Des Risswachstums
    Durch Kerben in Additiv Gefertigten Strukturen, n.d.
date_created: 2021-05-11T07:47:56Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
publication: Additive Fertigung von Bauteilen und Strukturen – Neue Erkenntnisse und
  Praxisbeispiele
status: public
title: Beeinflussung des Risswachstums durch Kerben in additiv gefertigten Strukturen
type: book
user_id: '60486'
year: '1778'
...
---
_id: '22114'
author:
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: H.A.
  full_name: Richard, H.A.
  last_name: Richard
- first_name: G.
  full_name: Kullmer, G.
  last_name: Kullmer
citation:
  ama: Riemer A, Leuders S, Richard HA, Kullmer G. <i>Optimierung der Werkstoffperformance
    lasergeschmolzener metallischer Werkstoffe</i>.
  apa: Riemer, A., Leuders, S., Richard, H. A., &#38; Kullmer, G. (n.d.). <i>Optimierung
    der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe</i>.
  bibtex: '@book{Riemer_Leuders_Richard_Kullmer, title={Optimierung der Werkstoffperformance
    lasergeschmolzener metallischer Werkstoffe}, author={Riemer, A. and Leuders, S.
    and Richard, H.A. and Kullmer, G.} }'
  chicago: Riemer, A., S. Leuders, H.A. Richard, and G. Kullmer. <i>Optimierung der
    Werkstoffperformance lasergeschmolzener metallischer Werkstoffe</i>, n.d.
  ieee: A. Riemer, S. Leuders, H. A. Richard, and G. Kullmer, <i>Optimierung der Werkstoffperformance
    lasergeschmolzener metallischer Werkstoffe</i>. .
  mla: Riemer, A., et al. <i>Optimierung der Werkstoffperformance lasergeschmolzener
    metallischer Werkstoffe</i>.
  short: A. Riemer, S. Leuders, H.A. Richard, G. Kullmer, Optimierung der Werkstoffperformance
    lasergeschmolzener metallischer Werkstoffe, n.d.
date_created: 2021-05-11T07:48:00Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
language:
- iso: ger
status: public
title: Optimierung der Werkstoffperformance lasergeschmolzener metallischer Werkstoffe
type: book
user_id: '60486'
year: '1778'
...