[{"type":"journal_article","publication":"The Journal of Physical Chemistry C","abstract":[{"text":"Nanoporous ZnO powders with high surface-to-mass ratios (SMR) between 15 and 70 m2 g−1 are synthesized, structurally characterized, and studied by time-resolved photoluminescence (PL). A strong dependence of the recombination dynamics and spectral width on SMR is observed at T = 10 K, and pronounced disorder-induced effects are found in the temperature dependence. Both the thermally induced shift of the PL maximum and the spectrally integrated PL intensity are interpreted by appropriate theoretical models. This consistent quantitative analysis of the experimental data yields a characteristic energy of 15 meV for the disorder scale in the nanoporous ZnO sample with an intermediate SMR.","lang":"eng"}],"status":"public","_id":"25965","user_id":"23547","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"article_type":"original","language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"issn":["1932-7447","1932-7455"]},"quality_controlled":"1","year":"2011","citation":{"ama":"Chernikov A, Horst S, Waitz T, Tiemann M, Chatterjee S. Photoluminescence Properties of Ordered Mesoporous ZnO. <i>The Journal of Physical Chemistry C</i>. Published online 2011:1375-1379. doi:<a href=\"https://doi.org/10.1021/jp104293e\">10.1021/jp104293e</a>","chicago":"Chernikov, Alexej, Swantje Horst, Thomas Waitz, Michael Tiemann, and Sangam Chatterjee. “Photoluminescence Properties of Ordered Mesoporous ZnO.” <i>The Journal of Physical Chemistry C</i>, 2011, 1375–79. <a href=\"https://doi.org/10.1021/jp104293e\">https://doi.org/10.1021/jp104293e</a>.","ieee":"A. Chernikov, S. Horst, T. Waitz, M. Tiemann, and S. Chatterjee, “Photoluminescence Properties of Ordered Mesoporous ZnO,” <i>The Journal of Physical Chemistry C</i>, pp. 1375–1379, 2011, doi: <a href=\"https://doi.org/10.1021/jp104293e\">10.1021/jp104293e</a>.","mla":"Chernikov, Alexej, et al. “Photoluminescence Properties of Ordered Mesoporous ZnO.” <i>The Journal of Physical Chemistry C</i>, 2011, pp. 1375–79, doi:<a href=\"https://doi.org/10.1021/jp104293e\">10.1021/jp104293e</a>.","bibtex":"@article{Chernikov_Horst_Waitz_Tiemann_Chatterjee_2011, title={Photoluminescence Properties of Ordered Mesoporous ZnO}, DOI={<a href=\"https://doi.org/10.1021/jp104293e\">10.1021/jp104293e</a>}, journal={The Journal of Physical Chemistry C}, author={Chernikov, Alexej and Horst, Swantje and Waitz, Thomas and Tiemann, Michael and Chatterjee, Sangam}, year={2011}, pages={1375–1379} }","short":"A. Chernikov, S. Horst, T. Waitz, M. Tiemann, S. Chatterjee, The Journal of Physical Chemistry C (2011) 1375–1379.","apa":"Chernikov, A., Horst, S., Waitz, T., Tiemann, M., &#38; Chatterjee, S. (2011). Photoluminescence Properties of Ordered Mesoporous ZnO. <i>The Journal of Physical Chemistry C</i>, 1375–1379. <a href=\"https://doi.org/10.1021/jp104293e\">https://doi.org/10.1021/jp104293e</a>"},"page":"1375-1379","date_updated":"2023-03-09T08:31:28Z","date_created":"2021-10-09T05:02:31Z","author":[{"last_name":"Chernikov","full_name":"Chernikov, Alexej","first_name":"Alexej"},{"first_name":"Swantje","last_name":"Horst","full_name":"Horst, Swantje"},{"first_name":"Thomas","last_name":"Waitz","full_name":"Waitz, Thomas"},{"full_name":"Tiemann, Michael","id":"23547","orcid":"0000-0003-1711-2722","last_name":"Tiemann","first_name":"Michael"},{"last_name":"Chatterjee","full_name":"Chatterjee, Sangam","first_name":"Sangam"}],"title":"Photoluminescence Properties of Ordered Mesoporous ZnO","doi":"10.1021/jp104293e"},{"page":"909-912","citation":{"chicago":"Wagner, T., M. Bauer, T. Sauerwald, C.-D. Kohl, and Michael Tiemann. “X-Ray Absorption near-Edge Spectroscopy Investigation of the Oxidation State of Pd Species in Nanoporous SnO2 Gas Sensors for Methane Detection.” <i>Thin Solid Films</i>, 2011, 909–12. <a href=\"https://doi.org/10.1016/j.tsf.2011.04.187\">https://doi.org/10.1016/j.tsf.2011.04.187</a>.","ieee":"T. Wagner, M. Bauer, T. Sauerwald, C.-D. Kohl, and M. Tiemann, “X-ray absorption near-edge spectroscopy investigation of the oxidation state of Pd species in nanoporous SnO2 gas sensors for methane detection,” <i>Thin Solid Films</i>, pp. 909–912, 2011, doi: <a href=\"https://doi.org/10.1016/j.tsf.2011.04.187\">10.1016/j.tsf.2011.04.187</a>.","ama":"Wagner T, Bauer M, Sauerwald T, Kohl C-D, Tiemann M. X-ray absorption near-edge spectroscopy investigation of the oxidation state of Pd species in nanoporous SnO2 gas sensors for methane detection. <i>Thin Solid Films</i>. Published online 2011:909-912. doi:<a href=\"https://doi.org/10.1016/j.tsf.2011.04.187\">10.1016/j.tsf.2011.04.187</a>","mla":"Wagner, T., et al. “X-Ray Absorption near-Edge Spectroscopy Investigation of the Oxidation State of Pd Species in Nanoporous SnO2 Gas Sensors for Methane Detection.” <i>Thin Solid Films</i>, 2011, pp. 909–12, doi:<a href=\"https://doi.org/10.1016/j.tsf.2011.04.187\">10.1016/j.tsf.2011.04.187</a>.","short":"T. Wagner, M. Bauer, T. Sauerwald, C.-D. Kohl, M. Tiemann, Thin Solid Films (2011) 909–912.","bibtex":"@article{Wagner_Bauer_Sauerwald_Kohl_Tiemann_2011, title={X-ray absorption near-edge spectroscopy investigation of the oxidation state of Pd species in nanoporous SnO2 gas sensors for methane detection}, DOI={<a href=\"https://doi.org/10.1016/j.tsf.2011.04.187\">10.1016/j.tsf.2011.04.187</a>}, journal={Thin Solid Films}, author={Wagner, T. and Bauer, M. and Sauerwald, T. and Kohl, C.-D. and Tiemann, Michael}, year={2011}, pages={909–912} }","apa":"Wagner, T., Bauer, M., Sauerwald, T., Kohl, C.-D., &#38; Tiemann, M. (2011). X-ray absorption near-edge spectroscopy investigation of the oxidation state of Pd species in nanoporous SnO2 gas sensors for methane detection. <i>Thin Solid Films</i>, 909–912. <a href=\"https://doi.org/10.1016/j.tsf.2011.04.187\">https://doi.org/10.1016/j.tsf.2011.04.187</a>"},"year":"2011","publication_identifier":{"issn":["0040-6090"]},"quality_controlled":"1","publication_status":"published","doi":"10.1016/j.tsf.2011.04.187","title":"X-ray absorption near-edge spectroscopy investigation of the oxidation state of Pd species in nanoporous SnO2 gas sensors for methane detection","date_created":"2021-10-09T04:59:31Z","author":[{"full_name":"Wagner, T.","last_name":"Wagner","first_name":"T."},{"first_name":"M.","full_name":"Bauer, M.","last_name":"Bauer"},{"first_name":"T.","full_name":"Sauerwald, T.","last_name":"Sauerwald"},{"first_name":"C.-D.","full_name":"Kohl, C.-D.","last_name":"Kohl"},{"last_name":"Tiemann","orcid":"0000-0003-1711-2722","full_name":"Tiemann, Michael","id":"23547","first_name":"Michael"}],"date_updated":"2023-03-09T08:28:16Z","status":"public","abstract":[{"text":"We report the correlation of the aging of Pd-doped SnO2 methane sensors with the change of the oxidation state of Pd. Mesoporous SnO2 doped with palladium species was prepared and exposed to different gas mixtures at high temperature (600 °C) to simulate long term usage. After each exposure step a fraction of the sample was cooled down to “freeze” the current oxidation state of Pd which was then analyzed by X-ray Absorption Near-Edge Spectroscopy (XANES) using the 'white line' (i.e. the absorption peak corresponding to the transition from the 2p3/2 core level to unoccupied 4 d states) intensity of the L(III) edge as a probe for the oxidation state. The Pd oxidation state correlates with the response of the resistive SnO2 sensor to methane gas, as determined by measuring the gas response to different concentrations of methane. Samples treated with 5000 ppm methane in air show a significant reduction of Pd(II) to Pd(0), depending clearly on the carrier gas (synthetic air, pure nitrogen) and on the temperature (600 °C vs. 300 °C).","lang":"eng"}],"publication":"Thin Solid Films","type":"journal_article","language":[{"iso":"eng"}],"article_type":"original","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","_id":"25962"},{"_id":"25964","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","article_type":"original","language":[{"iso":"eng"}],"publication":"Sensors","type":"journal_article","abstract":[{"text":"Capacitive sensors are the most commonly used devices for the detection of humidity because they are inexpensive and the detection mechanism is very specific for humidity. However, especially for industrial processes, there is a lack of dielectrics that are stable at high temperature (>200 °C) and under harsh conditions. We present a capacitive sensor based on mesoporous silica as the dielectric in a simple sensor design based on pressed silica pellets. Investigation of the structural stability of the porous silica under simulated operating conditions as well as the influence of the pellet production will be shown. Impedance measurements demonstrate the utility of the sensor at both low (90 °C) and high (up to 210 °C) operating temperatures.","lang":"eng"}],"status":"public","date_updated":"2023-03-09T08:30:11Z","oa":"1","author":[{"first_name":"Thorsten","last_name":"Wagner","full_name":"Wagner, Thorsten"},{"last_name":"Krotzky","full_name":"Krotzky, Sören","first_name":"Sören"},{"first_name":"Alexander","last_name":"Weiß","full_name":"Weiß, Alexander"},{"last_name":"Sauerwald","full_name":"Sauerwald, Tilman","first_name":"Tilman"},{"first_name":"Claus-Dieter","full_name":"Kohl, Claus-Dieter","last_name":"Kohl"},{"last_name":"Roggenbuck","full_name":"Roggenbuck, Jan","first_name":"Jan"},{"first_name":"Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","id":"23547","full_name":"Tiemann, Michael"}],"date_created":"2021-10-09T05:01:29Z","title":"A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica","doi":"10.3390/s110303135","main_file_link":[{"url":"https://www.mdpi.com/1424-8220/11/3/3135/pdf?version=1403314474","open_access":"1"}],"publication_identifier":{"issn":["1424-8220"]},"quality_controlled":"1","publication_status":"published","year":"2011","page":"3135-3144","citation":{"apa":"Wagner, T., Krotzky, S., Weiß, A., Sauerwald, T., Kohl, C.-D., Roggenbuck, J., &#38; Tiemann, M. (2011). A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica. <i>Sensors</i>, 3135–3144. <a href=\"https://doi.org/10.3390/s110303135\">https://doi.org/10.3390/s110303135</a>","mla":"Wagner, Thorsten, et al. “A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica.” <i>Sensors</i>, 2011, pp. 3135–44, doi:<a href=\"https://doi.org/10.3390/s110303135\">10.3390/s110303135</a>.","short":"T. Wagner, S. Krotzky, A. Weiß, T. Sauerwald, C.-D. Kohl, J. Roggenbuck, M. Tiemann, Sensors (2011) 3135–3144.","bibtex":"@article{Wagner_Krotzky_Weiß_Sauerwald_Kohl_Roggenbuck_Tiemann_2011, title={A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica}, DOI={<a href=\"https://doi.org/10.3390/s110303135\">10.3390/s110303135</a>}, journal={Sensors}, author={Wagner, Thorsten and Krotzky, Sören and Weiß, Alexander and Sauerwald, Tilman and Kohl, Claus-Dieter and Roggenbuck, Jan and Tiemann, Michael}, year={2011}, pages={3135–3144} }","chicago":"Wagner, Thorsten, Sören Krotzky, Alexander Weiß, Tilman Sauerwald, Claus-Dieter Kohl, Jan Roggenbuck, and Michael Tiemann. “A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica.” <i>Sensors</i>, 2011, 3135–44. <a href=\"https://doi.org/10.3390/s110303135\">https://doi.org/10.3390/s110303135</a>.","ieee":"T. Wagner <i>et al.</i>, “A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica,” <i>Sensors</i>, pp. 3135–3144, 2011, doi: <a href=\"https://doi.org/10.3390/s110303135\">10.3390/s110303135</a>.","ama":"Wagner T, Krotzky S, Weiß A, et al. A High Temperature Capacitive Humidity Sensor Based on Mesoporous Silica. <i>Sensors</i>. Published online 2011:3135-3144. doi:<a href=\"https://doi.org/10.3390/s110303135\">10.3390/s110303135</a>"}},{"type":"journal_article","publication":"Sensors and Actuators B: Chemical","abstract":[{"lang":"eng","text":"We report the synthesis of mesoporous tin dioxide (SnO2) materials with well-defined particle morphology. The products consist of uniform spheres with a diameter of 5 μm. The spheres are hierarchically porous with two distinct pore modes of 5.0 nm and 52 nm, respectively. This special porosity is the result of a synthesis procedure which involves a ‘hard templating’ (nanocasting) process. The product forms an approximately homogeneous monolayer of spheres on a sensor substrate and shows promising response to methane gas with low cross-sensitivity to water. The structural properties and gas-sensing performance are compared with a mesoporous SnO2 material without defined morphology, prepared by a ‘soft templating’ procedure."}],"status":"public","_id":"25963","user_id":"23547","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"article_type":"original","language":[{"iso":"eng"}],"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0925-4005"]},"year":"2011","citation":{"ama":"Smått J-H, Lindén M, Wagner T, Kohl C-D, Tiemann M. Micrometer-sized nanoporous tin dioxide spheres for gas sensing. <i>Sensors and Actuators B: Chemical</i>. Published online 2011:483-488. doi:<a href=\"https://doi.org/10.1016/j.snb.2010.12.051\">10.1016/j.snb.2010.12.051</a>","chicago":"Smått, J.-H., M. Lindén, T. Wagner, C.-D. Kohl, and Michael Tiemann. “Micrometer-Sized Nanoporous Tin Dioxide Spheres for Gas Sensing.” <i>Sensors and Actuators B: Chemical</i>, 2011, 483–88. <a href=\"https://doi.org/10.1016/j.snb.2010.12.051\">https://doi.org/10.1016/j.snb.2010.12.051</a>.","ieee":"J.-H. Smått, M. Lindén, T. Wagner, C.-D. Kohl, and M. Tiemann, “Micrometer-sized nanoporous tin dioxide spheres for gas sensing,” <i>Sensors and Actuators B: Chemical</i>, pp. 483–488, 2011, doi: <a href=\"https://doi.org/10.1016/j.snb.2010.12.051\">10.1016/j.snb.2010.12.051</a>.","apa":"Smått, J.-H., Lindén, M., Wagner, T., Kohl, C.-D., &#38; Tiemann, M. (2011). Micrometer-sized nanoporous tin dioxide spheres for gas sensing. <i>Sensors and Actuators B: Chemical</i>, 483–488. <a href=\"https://doi.org/10.1016/j.snb.2010.12.051\">https://doi.org/10.1016/j.snb.2010.12.051</a>","mla":"Smått, J. H., et al. “Micrometer-Sized Nanoporous Tin Dioxide Spheres for Gas Sensing.” <i>Sensors and Actuators B: Chemical</i>, 2011, pp. 483–88, doi:<a href=\"https://doi.org/10.1016/j.snb.2010.12.051\">10.1016/j.snb.2010.12.051</a>.","bibtex":"@article{Smått_Lindén_Wagner_Kohl_Tiemann_2011, title={Micrometer-sized nanoporous tin dioxide spheres for gas sensing}, DOI={<a href=\"https://doi.org/10.1016/j.snb.2010.12.051\">10.1016/j.snb.2010.12.051</a>}, journal={Sensors and Actuators B: Chemical}, author={Smått, J.-H. and Lindén, M. and Wagner, T. and Kohl, C.-D. and Tiemann, Michael}, year={2011}, pages={483–488} }","short":"J.-H. Smått, M. Lindén, T. Wagner, C.-D. Kohl, M. Tiemann, Sensors and Actuators B: Chemical (2011) 483–488."},"page":"483-488","date_updated":"2023-03-09T08:30:50Z","date_created":"2021-10-09T05:00:31Z","author":[{"full_name":"Smått, J.-H.","last_name":"Smått","first_name":"J.-H."},{"last_name":"Lindén","full_name":"Lindén, M.","first_name":"M."},{"first_name":"T.","last_name":"Wagner","full_name":"Wagner, T."},{"full_name":"Kohl, C.-D.","last_name":"Kohl","first_name":"C.-D."},{"first_name":"Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","id":"23547","full_name":"Tiemann, Michael"}],"title":"Micrometer-sized nanoporous tin dioxide spheres for gas sensing","doi":"10.1016/j.snb.2010.12.051"},{"year":"2011","page":"918-921","citation":{"short":"T. Wagner, J. Hennemann, C.-D. Kohl, M. Tiemann, Thin Solid Films (2011) 918–921.","mla":"Wagner, T., et al. “Photocatalytic Ozone Sensor Based on Mesoporous Indium Oxide: Influence of the Relative Humidity on the Sensing Performance.” <i>Thin Solid Films</i>, 2011, pp. 918–21, doi:<a href=\"https://doi.org/10.1016/j.tsf.2011.04.181\">10.1016/j.tsf.2011.04.181</a>.","bibtex":"@article{Wagner_Hennemann_Kohl_Tiemann_2011, title={Photocatalytic ozone sensor based on mesoporous indium oxide: Influence of the relative humidity on the sensing performance}, DOI={<a href=\"https://doi.org/10.1016/j.tsf.2011.04.181\">10.1016/j.tsf.2011.04.181</a>}, journal={Thin Solid Films}, author={Wagner, T. and Hennemann, J. and Kohl, C.-D. and Tiemann, Michael}, year={2011}, pages={918–921} }","apa":"Wagner, T., Hennemann, J., Kohl, C.-D., &#38; Tiemann, M. (2011). Photocatalytic ozone sensor based on mesoporous indium oxide: Influence of the relative humidity on the sensing performance. <i>Thin Solid Films</i>, 918–921. <a href=\"https://doi.org/10.1016/j.tsf.2011.04.181\">https://doi.org/10.1016/j.tsf.2011.04.181</a>","chicago":"Wagner, T., J. Hennemann, C.-D. Kohl, and Michael Tiemann. “Photocatalytic Ozone Sensor Based on Mesoporous Indium Oxide: Influence of the Relative Humidity on the Sensing Performance.” <i>Thin Solid Films</i>, 2011, 918–21. <a href=\"https://doi.org/10.1016/j.tsf.2011.04.181\">https://doi.org/10.1016/j.tsf.2011.04.181</a>.","ieee":"T. Wagner, J. Hennemann, C.-D. Kohl, and M. Tiemann, “Photocatalytic ozone sensor based on mesoporous indium oxide: Influence of the relative humidity on the sensing performance,” <i>Thin Solid Films</i>, pp. 918–921, 2011, doi: <a href=\"https://doi.org/10.1016/j.tsf.2011.04.181\">10.1016/j.tsf.2011.04.181</a>.","ama":"Wagner T, Hennemann J, Kohl C-D, Tiemann M. Photocatalytic ozone sensor based on mesoporous indium oxide: Influence of the relative humidity on the sensing performance. <i>Thin Solid Films</i>. Published online 2011:918-921. doi:<a href=\"https://doi.org/10.1016/j.tsf.2011.04.181\">10.1016/j.tsf.2011.04.181</a>"},"publication_identifier":{"issn":["0040-6090"]},"quality_controlled":"1","publication_status":"published","title":"Photocatalytic ozone sensor based on mesoporous indium oxide: Influence of the relative humidity on the sensing performance","doi":"10.1016/j.tsf.2011.04.181","date_updated":"2023-03-09T08:29:14Z","date_created":"2021-10-09T04:57:57Z","author":[{"last_name":"Wagner","full_name":"Wagner, T.","first_name":"T."},{"first_name":"J.","full_name":"Hennemann, J.","last_name":"Hennemann"},{"first_name":"C.-D.","last_name":"Kohl","full_name":"Kohl, C.-D."},{"first_name":"Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","full_name":"Tiemann, Michael","id":"23547"}],"abstract":[{"lang":"eng","text":"Mesoporous In2O3, synthesized by a nanocasting procedure, is used as a resistive gas sensor for ozone in very low concentrations (from 20 ppb to 2.4 ppm) at room temperature. Its sensing performance is substantially increased by illumination with blue light (460 nm, 2.7 eV). For low ozone concentrations the sensor response increases with increasing humidity. However, higher humidity also results in the occurrence of a saturation of the response at lower ozone concentrations; this is rationalized by assuming a poisoning of surface active sites by hydroxyl groups."}],"status":"public","publication":"Thin Solid Films","type":"journal_article","article_type":"original","language":[{"iso":"eng"}],"_id":"25961","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547"},{"language":[{"iso":"eng"}],"article_type":"original","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","_id":"25971","status":"public","abstract":[{"text":"Precipitation of zinc sulfide particles is a very rapid process, and monitoring of the particle growth is experimentally very demanding. Applying a liquid jet flow cell, we were able to follow zinc sulfide particle formation on time scales down to 10−5 s. The flow cell was designed in such a way that data acquisition on the microsecond time scale was possible under steady-state conditions along a liquid jet (tubular reactor concept), allowing SAXS data accumulation over a time scale of minutes. We were able to monitor the growth of zinc sulfide particles and found experimental evidence for very rapid particle aggregation processes within the liquid jet. Under the experimental conditions the particle growth is controlled by mass transfer: i.e., the diffusion of the hydrogen sulfide into the liquid jet.","lang":"eng"}],"publication":"Journal of the American Chemical Society","type":"journal_article","doi":"10.1021/ja101519z","title":"Accessing Ultrashort Reaction Times in Particle Formation with SAXS Experiments: ZnS Precipitation on the Microsecond Time Scale","author":[{"first_name":"Wolfgang","full_name":"Schmidt, Wolfgang","last_name":"Schmidt"},{"first_name":"Patrick","last_name":"Bussian","full_name":"Bussian, Patrick"},{"last_name":"Lindén","full_name":"Lindén, Mika","first_name":"Mika"},{"full_name":"Amenitsch, Heinz","last_name":"Amenitsch","first_name":"Heinz"},{"first_name":"Patrik","last_name":"Agren","full_name":"Agren, Patrik"},{"full_name":"Tiemann, Michael","id":"23547","orcid":"0000-0003-1711-2722","last_name":"Tiemann","first_name":"Michael"},{"first_name":"Ferdi","last_name":"Schüth","full_name":"Schüth, Ferdi"}],"date_created":"2021-10-09T05:07:01Z","date_updated":"2023-03-09T08:34:00Z","page":"6822-6826","citation":{"ama":"Schmidt W, Bussian P, Lindén M, et al. Accessing Ultrashort Reaction Times in Particle Formation with SAXS Experiments: ZnS Precipitation on the Microsecond Time Scale. <i>Journal of the American Chemical Society</i>. Published online 2010:6822-6826. doi:<a href=\"https://doi.org/10.1021/ja101519z\">10.1021/ja101519z</a>","ieee":"W. Schmidt <i>et al.</i>, “Accessing Ultrashort Reaction Times in Particle Formation with SAXS Experiments: ZnS Precipitation on the Microsecond Time Scale,” <i>Journal of the American Chemical Society</i>, pp. 6822–6826, 2010, doi: <a href=\"https://doi.org/10.1021/ja101519z\">10.1021/ja101519z</a>.","chicago":"Schmidt, Wolfgang, Patrick Bussian, Mika Lindén, Heinz Amenitsch, Patrik Agren, Michael Tiemann, and Ferdi Schüth. “Accessing Ultrashort Reaction Times in Particle Formation with SAXS Experiments: ZnS Precipitation on the Microsecond Time Scale.” <i>Journal of the American Chemical Society</i>, 2010, 6822–26. <a href=\"https://doi.org/10.1021/ja101519z\">https://doi.org/10.1021/ja101519z</a>.","bibtex":"@article{Schmidt_Bussian_Lindén_Amenitsch_Agren_Tiemann_Schüth_2010, title={Accessing Ultrashort Reaction Times in Particle Formation with SAXS Experiments: ZnS Precipitation on the Microsecond Time Scale}, DOI={<a href=\"https://doi.org/10.1021/ja101519z\">10.1021/ja101519z</a>}, journal={Journal of the American Chemical Society}, author={Schmidt, Wolfgang and Bussian, Patrick and Lindén, Mika and Amenitsch, Heinz and Agren, Patrik and Tiemann, Michael and Schüth, Ferdi}, year={2010}, pages={6822–6826} }","short":"W. Schmidt, P. Bussian, M. Lindén, H. Amenitsch, P. Agren, M. Tiemann, F. Schüth, Journal of the American Chemical Society (2010) 6822–6826.","mla":"Schmidt, Wolfgang, et al. “Accessing Ultrashort Reaction Times in Particle Formation with SAXS Experiments: ZnS Precipitation on the Microsecond Time Scale.” <i>Journal of the American Chemical Society</i>, 2010, pp. 6822–26, doi:<a href=\"https://doi.org/10.1021/ja101519z\">10.1021/ja101519z</a>.","apa":"Schmidt, W., Bussian, P., Lindén, M., Amenitsch, H., Agren, P., Tiemann, M., &#38; Schüth, F. (2010). Accessing Ultrashort Reaction Times in Particle Formation with SAXS Experiments: ZnS Precipitation on the Microsecond Time Scale. <i>Journal of the American Chemical Society</i>, 6822–6826. <a href=\"https://doi.org/10.1021/ja101519z\">https://doi.org/10.1021/ja101519z</a>"},"year":"2010","publication_identifier":{"issn":["0002-7863","1520-5126"]},"quality_controlled":"1","publication_status":"published"},{"abstract":[{"text":"We report the structural characterization and gas sensing properties of mesoporous SnO2 synthesized by structure replication (nanocasting) from ordered mesoporous KIT-6 silica. The products show a high thermal stability with no structural loss up to 600 °C and only minor decrease in specific surface area by 18% at 800 °C, as proven by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen physisorption. In particular, the samples turn out to be much more stable than porous SnO2 materials prepared by sol–gel-based synthesis procedures for comparison. The thermal stability facilitates the utilization of the materials as sensors for combustible gases which react at high temperatures; test measurements reveal promising responses to methane (CH4) as an example.","lang":"eng"}],"status":"public","publication":"Sensors and Actuators B: Chemical","type":"journal_article","article_type":"original","language":[{"iso":"eng"}],"_id":"25967","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","year":"2010","page":"788-793","citation":{"chicago":"Waitz, T., B. Becker, T. Wagner, T. Sauerwald, C.-D. Kohl, and Michael Tiemann. “Ordered Nanoporous SnO2 Gas Sensors with High Thermal Stability.” <i>Sensors and Actuators B: Chemical</i>, 2010, 788–93. <a href=\"https://doi.org/10.1016/j.snb.2010.08.001\">https://doi.org/10.1016/j.snb.2010.08.001</a>.","ieee":"T. Waitz, B. Becker, T. Wagner, T. Sauerwald, C.-D. Kohl, and M. Tiemann, “Ordered nanoporous SnO2 gas sensors with high thermal stability,” <i>Sensors and Actuators B: Chemical</i>, pp. 788–793, 2010, doi: <a href=\"https://doi.org/10.1016/j.snb.2010.08.001\">10.1016/j.snb.2010.08.001</a>.","ama":"Waitz T, Becker B, Wagner T, Sauerwald T, Kohl C-D, Tiemann M. Ordered nanoporous SnO2 gas sensors with high thermal stability. <i>Sensors and Actuators B: Chemical</i>. Published online 2010:788-793. doi:<a href=\"https://doi.org/10.1016/j.snb.2010.08.001\">10.1016/j.snb.2010.08.001</a>","apa":"Waitz, T., Becker, B., Wagner, T., Sauerwald, T., Kohl, C.-D., &#38; Tiemann, M. (2010). Ordered nanoporous SnO2 gas sensors with high thermal stability. <i>Sensors and Actuators B: Chemical</i>, 788–793. <a href=\"https://doi.org/10.1016/j.snb.2010.08.001\">https://doi.org/10.1016/j.snb.2010.08.001</a>","short":"T. Waitz, B. Becker, T. Wagner, T. Sauerwald, C.-D. Kohl, M. Tiemann, Sensors and Actuators B: Chemical (2010) 788–793.","mla":"Waitz, T., et al. “Ordered Nanoporous SnO2 Gas Sensors with High Thermal Stability.” <i>Sensors and Actuators B: Chemical</i>, 2010, pp. 788–93, doi:<a href=\"https://doi.org/10.1016/j.snb.2010.08.001\">10.1016/j.snb.2010.08.001</a>.","bibtex":"@article{Waitz_Becker_Wagner_Sauerwald_Kohl_Tiemann_2010, title={Ordered nanoporous SnO2 gas sensors with high thermal stability}, DOI={<a href=\"https://doi.org/10.1016/j.snb.2010.08.001\">10.1016/j.snb.2010.08.001</a>}, journal={Sensors and Actuators B: Chemical}, author={Waitz, T. and Becker, B. and Wagner, T. and Sauerwald, T. and Kohl, C.-D. and Tiemann, Michael}, year={2010}, pages={788–793} }"},"quality_controlled":"1","publication_identifier":{"issn":["0925-4005"]},"publication_status":"published","title":"Ordered nanoporous SnO2 gas sensors with high thermal stability","doi":"10.1016/j.snb.2010.08.001","date_updated":"2023-03-09T08:35:09Z","author":[{"first_name":"T.","full_name":"Waitz, T.","last_name":"Waitz"},{"first_name":"B.","last_name":"Becker","full_name":"Becker, B."},{"first_name":"T.","last_name":"Wagner","full_name":"Wagner, T."},{"full_name":"Sauerwald, T.","last_name":"Sauerwald","first_name":"T."},{"full_name":"Kohl, C.-D.","last_name":"Kohl","first_name":"C.-D."},{"last_name":"Tiemann","orcid":"0000-0003-1711-2722","full_name":"Tiemann, Michael","id":"23547","first_name":"Michael"}],"date_created":"2021-10-09T05:04:40Z"},{"department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","_id":"25972","language":[{"iso":"eng"}],"article_type":"original","publication":"The Journal of Physical Chemistry C","type":"journal_article","status":"public","abstract":[{"lang":"eng","text":"In2O3 with ordered, uniform mesoporosity is prepared by nanocasting, using various porous silica phases (KIT-6, SBA-15) as structure matrices. The In2O3 particles exhibit well-defined morphologies (spherical or ellipsoidal, depending on the choice of silica matrix) and quite uniform sizes in the range of a few hundred nanometers. The regular morphology of the In2O3 particles is not associated with the morphological properties of the silica matrices. Instead, it is the result of the growth mechanism of In2O3 inside the silica pores; this mechanism is investigated in some detail. Hence, the nanocasting method offers a versatile and simple way of creating mesoporous In2O3 with regular morphology; this will be beneficial for many applications that require well-defined morphological properties, such as gas sensing or catalysis."}],"date_created":"2021-10-09T05:07:48Z","author":[{"first_name":"Stefanie","full_name":"Haffer, Stefanie","last_name":"Haffer"},{"first_name":"Thomas","last_name":"Waitz","full_name":"Waitz, Thomas"},{"full_name":"Tiemann, Michael","id":"23547","last_name":"Tiemann","orcid":"0000-0003-1711-2722","first_name":"Michael"}],"date_updated":"2023-03-09T08:34:42Z","doi":"10.1021/jp910336f","title":"Mesoporous In2O3 with Regular Morphology by Nanocasting: A Simple Relation between Defined Particle Shape and Growth Mechanism","publication_identifier":{"issn":["1932-7447","1932-7455"]},"quality_controlled":"1","publication_status":"published","page":"2075-2081","citation":{"ieee":"S. Haffer, T. Waitz, and M. Tiemann, “Mesoporous In2O3 with Regular Morphology by Nanocasting: A Simple Relation between Defined Particle Shape and Growth Mechanism,” <i>The Journal of Physical Chemistry C</i>, pp. 2075–2081, 2010, doi: <a href=\"https://doi.org/10.1021/jp910336f\">10.1021/jp910336f</a>.","chicago":"Haffer, Stefanie, Thomas Waitz, and Michael Tiemann. “Mesoporous In2O3 with Regular Morphology by Nanocasting: A Simple Relation between Defined Particle Shape and Growth Mechanism.” <i>The Journal of Physical Chemistry C</i>, 2010, 2075–81. <a href=\"https://doi.org/10.1021/jp910336f\">https://doi.org/10.1021/jp910336f</a>.","ama":"Haffer S, Waitz T, Tiemann M. Mesoporous In2O3 with Regular Morphology by Nanocasting: A Simple Relation between Defined Particle Shape and Growth Mechanism. <i>The Journal of Physical Chemistry C</i>. Published online 2010:2075-2081. doi:<a href=\"https://doi.org/10.1021/jp910336f\">10.1021/jp910336f</a>","short":"S. Haffer, T. Waitz, M. Tiemann, The Journal of Physical Chemistry C (2010) 2075–2081.","mla":"Haffer, Stefanie, et al. “Mesoporous In2O3 with Regular Morphology by Nanocasting: A Simple Relation between Defined Particle Shape and Growth Mechanism.” <i>The Journal of Physical Chemistry C</i>, 2010, pp. 2075–81, doi:<a href=\"https://doi.org/10.1021/jp910336f\">10.1021/jp910336f</a>.","bibtex":"@article{Haffer_Waitz_Tiemann_2010, title={Mesoporous In2O3 with Regular Morphology by Nanocasting: A Simple Relation between Defined Particle Shape and Growth Mechanism}, DOI={<a href=\"https://doi.org/10.1021/jp910336f\">10.1021/jp910336f</a>}, journal={The Journal of Physical Chemistry C}, author={Haffer, Stefanie and Waitz, Thomas and Tiemann, Michael}, year={2010}, pages={2075–2081} }","apa":"Haffer, S., Waitz, T., &#38; Tiemann, M. (2010). Mesoporous In2O3 with Regular Morphology by Nanocasting: A Simple Relation between Defined Particle Shape and Growth Mechanism. <i>The Journal of Physical Chemistry C</i>, 2075–2081. <a href=\"https://doi.org/10.1021/jp910336f\">https://doi.org/10.1021/jp910336f</a>"},"year":"2010"},{"title":"Periodic Mesoporous Organosilica (PMO) Materials with Uniform Spherical Core-Shell Structure","doi":"10.1002/chem.201000643","date_updated":"2023-03-09T08:35:54Z","author":[{"full_name":"Haffer, Stefanie","last_name":"Haffer","first_name":"Stefanie"},{"id":"23547","full_name":"Tiemann, Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","first_name":"Michael"},{"full_name":"Fröba, Michael","last_name":"Fröba","first_name":"Michael"}],"date_created":"2021-10-09T05:06:03Z","year":"2010","page":"10447-10452","citation":{"ama":"Haffer S, Tiemann M, Fröba M. Periodic Mesoporous Organosilica (PMO) Materials with Uniform Spherical Core-Shell Structure. <i>Chemistry - A European Journal</i>. Published online 2010:10447-10452. doi:<a href=\"https://doi.org/10.1002/chem.201000643\">10.1002/chem.201000643</a>","ieee":"S. Haffer, M. Tiemann, and M. Fröba, “Periodic Mesoporous Organosilica (PMO) Materials with Uniform Spherical Core-Shell Structure,” <i>Chemistry - A European Journal</i>, pp. 10447–10452, 2010, doi: <a href=\"https://doi.org/10.1002/chem.201000643\">10.1002/chem.201000643</a>.","chicago":"Haffer, Stefanie, Michael Tiemann, and Michael Fröba. “Periodic Mesoporous Organosilica (PMO) Materials with Uniform Spherical Core-Shell Structure.” <i>Chemistry - A European Journal</i>, 2010, 10447–52. <a href=\"https://doi.org/10.1002/chem.201000643\">https://doi.org/10.1002/chem.201000643</a>.","mla":"Haffer, Stefanie, et al. “Periodic Mesoporous Organosilica (PMO) Materials with Uniform Spherical Core-Shell Structure.” <i>Chemistry - A European Journal</i>, 2010, pp. 10447–52, doi:<a href=\"https://doi.org/10.1002/chem.201000643\">10.1002/chem.201000643</a>.","short":"S. Haffer, M. Tiemann, M. Fröba, Chemistry - A European Journal (2010) 10447–10452.","bibtex":"@article{Haffer_Tiemann_Fröba_2010, title={Periodic Mesoporous Organosilica (PMO) Materials with Uniform Spherical Core-Shell Structure}, DOI={<a href=\"https://doi.org/10.1002/chem.201000643\">10.1002/chem.201000643</a>}, journal={Chemistry - A European Journal}, author={Haffer, Stefanie and Tiemann, Michael and Fröba, Michael}, year={2010}, pages={10447–10452} }","apa":"Haffer, S., Tiemann, M., &#38; Fröba, M. (2010). Periodic Mesoporous Organosilica (PMO) Materials with Uniform Spherical Core-Shell Structure. <i>Chemistry - A European Journal</i>, 10447–10452. <a href=\"https://doi.org/10.1002/chem.201000643\">https://doi.org/10.1002/chem.201000643</a>"},"publication_identifier":{"issn":["0947-6539"]},"quality_controlled":"1","publication_status":"published","article_type":"original","language":[{"iso":"eng"}],"_id":"25968","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","abstract":[{"text":"We report the synthesis of monodisperse, spherical periodic mesoporous organosilica (PMO) materials. The particles have diameters between about 350 and 550 nm. They exhibit a regular core-shell structure with a solid, non-porous silica core and a mesoporous PMO shell with a thickness of approximately 75 nm and uniform pores of about 1.7 nm. The synthesis of the core and the shell is carried out in a one-pot, two-stage synthesis and can be accomplished at temperatures between 25 and 100 °C. Higher synthesis temperatures lead to substantial shrinking of the solid core, generating an empty void between core and shell. This leads to interesting cavitation phenomena in the nitrogen physisorption analysis at 77.4 K.","lang":"eng"}],"status":"public","publication":"Chemistry - A European Journal","type":"journal_article"},{"volume":2,"author":[{"first_name":"Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","id":"23547","full_name":"Tiemann, Michael"}],"date_updated":"2023-03-09T08:40:44Z","page":"291 - 310","intvolume":"         2","citation":{"bibtex":"@inbook{Tiemann_2010, place={New Jersey}, series={Chemical Sensors}, title={Ordered Mesoporous Films and Membranes: Synthesis, Properties and Applications in Gas Sensors}, volume={2}, booktitle={Nanostructured Materials}, publisher={Momentum Press}, author={Tiemann, Michael}, editor={Korotcenkov, Ghenadii}, year={2010}, pages={291–310}, collection={Chemical Sensors} }","short":"M. Tiemann, in: G. Korotcenkov (Ed.), Nanostructured Materials, Momentum Press, New Jersey, 2010, pp. 291–310.","mla":"Tiemann, Michael. “Ordered Mesoporous Films and Membranes: Synthesis, Properties and Applications in Gas Sensors.” <i>Nanostructured Materials</i>, edited by Ghenadii Korotcenkov, vol. 2, Momentum Press, 2010, pp. 291–310.","apa":"Tiemann, M. (2010). Ordered Mesoporous Films and Membranes: Synthesis, Properties and Applications in Gas Sensors. In G. Korotcenkov (Ed.), <i>Nanostructured Materials</i> (Vol. 2, pp. 291–310). Momentum Press.","ama":"Tiemann M. Ordered Mesoporous Films and Membranes: Synthesis, Properties and Applications in Gas Sensors. In: Korotcenkov G, ed. <i>Nanostructured Materials</i>. Vol 2. Chemical Sensors. Momentum Press; 2010:291-310.","ieee":"M. Tiemann, “Ordered Mesoporous Films and Membranes: Synthesis, Properties and Applications in Gas Sensors,” in <i>Nanostructured Materials</i>, vol. 2, G. Korotcenkov, Ed. New Jersey: Momentum Press, 2010, pp. 291–310.","chicago":"Tiemann, Michael. “Ordered Mesoporous Films and Membranes: Synthesis, Properties and Applications in Gas Sensors.” In <i>Nanostructured Materials</i>, edited by Ghenadii Korotcenkov, 2:291–310. Chemical Sensors. New Jersey: Momentum Press, 2010."},"place":"New Jersey","publication_identifier":{"unknown":["978-1-60650-106-1"]},"department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","series_title":"Chemical Sensors","_id":"25973","status":"public","editor":[{"full_name":"Korotcenkov, Ghenadii","last_name":"Korotcenkov","first_name":"Ghenadii"}],"type":"book_chapter","title":"Ordered Mesoporous Films and Membranes: Synthesis, Properties and Applications in Gas Sensors","date_created":"2021-10-09T05:23:17Z","publisher":"Momentum Press","year":"2010","quality_controlled":"1","language":[{"iso":"eng"}],"abstract":[{"text":"Chemical sensors are integral to the automation of myriad industrial processes, as well as everyday monitoring of such activities as public safety, engine performance, medical therapeutics, and many more...","lang":"eng"}],"publication":"Nanostructured Materials"},{"type":"journal_article","publication":"Advanced Functional Materials","status":"public","abstract":[{"lang":"eng","text":"The synthesis and characterization of ordered mesoporous In2O3 materials by structure replication from hexagonal mesoporous SBA-15 silica and cubic KIT-6 silica is presented. Variation of the synthesis parameters allows for different pore sizes and pore wall thicknesses in the products. The In2O3 samples turn out to be stable up to temperatures between 450 °C and 650 °C; such high thermal stability is necessary for their application as gas sensors. Test measurements show a high sensitivity to methane gas in concentrations relevant for explosion prevention. The sensitivity is shown to be correlated not only with the surface-to-volume ratio, but also with the nanoscopic structural properties of the materials."}],"user_id":"23547","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"_id":"25975","language":[{"iso":"eng"}],"extern":"1","article_type":"original","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["1616-301X","1616-3028"]},"citation":{"bibtex":"@article{Waitz_Wagner_Sauerwald_Kohl_Tiemann_2009, title={Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor}, DOI={<a href=\"https://doi.org/10.1002/adfm.200801458\">10.1002/adfm.200801458</a>}, journal={Advanced Functional Materials}, author={Waitz, Thomas and Wagner, Thorsten and Sauerwald, Tilman and Kohl, Claus-Dieter and Tiemann, Michael}, year={2009}, pages={653–661} }","short":"T. Waitz, T. Wagner, T. Sauerwald, C.-D. Kohl, M. Tiemann, Advanced Functional Materials (2009) 653–661.","mla":"Waitz, Thomas, et al. “Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor.” <i>Advanced Functional Materials</i>, 2009, pp. 653–61, doi:<a href=\"https://doi.org/10.1002/adfm.200801458\">10.1002/adfm.200801458</a>.","apa":"Waitz, T., Wagner, T., Sauerwald, T., Kohl, C.-D., &#38; Tiemann, M. (2009). Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor. <i>Advanced Functional Materials</i>, 653–661. <a href=\"https://doi.org/10.1002/adfm.200801458\">https://doi.org/10.1002/adfm.200801458</a>","ama":"Waitz T, Wagner T, Sauerwald T, Kohl C-D, Tiemann M. Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor. <i>Advanced Functional Materials</i>. Published online 2009:653-661. doi:<a href=\"https://doi.org/10.1002/adfm.200801458\">10.1002/adfm.200801458</a>","ieee":"T. Waitz, T. Wagner, T. Sauerwald, C.-D. Kohl, and M. Tiemann, “Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor,” <i>Advanced Functional Materials</i>, pp. 653–661, 2009, doi: <a href=\"https://doi.org/10.1002/adfm.200801458\">10.1002/adfm.200801458</a>.","chicago":"Waitz, Thomas, Thorsten Wagner, Tilman Sauerwald, Claus-Dieter Kohl, and Michael Tiemann. “Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor.” <i>Advanced Functional Materials</i>, 2009, 653–61. <a href=\"https://doi.org/10.1002/adfm.200801458\">https://doi.org/10.1002/adfm.200801458</a>."},"page":"653-661","year":"2009","date_created":"2021-10-09T05:31:04Z","author":[{"last_name":"Waitz","full_name":"Waitz, Thomas","first_name":"Thomas"},{"full_name":"Wagner, Thorsten","last_name":"Wagner","first_name":"Thorsten"},{"first_name":"Tilman","full_name":"Sauerwald, Tilman","last_name":"Sauerwald"},{"first_name":"Claus-Dieter","full_name":"Kohl, Claus-Dieter","last_name":"Kohl"},{"full_name":"Tiemann, Michael","id":"23547","orcid":"0000-0003-1711-2722","last_name":"Tiemann","first_name":"Michael"}],"date_updated":"2023-03-09T08:42:44Z","doi":"10.1002/adfm.200801458","title":"Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor"},{"language":[{"iso":"eng"}],"extern":"1","article_type":"original","user_id":"23547","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"_id":"25977","status":"public","abstract":[{"text":"We report a systematic study of the photoluminescence properties of ZnO nanostructures. In particular, mesoporous ZnO powders of varying surface-to-mass ratio are investigated and compared to a bulk reference. At low temperatures the emission from higher-energy states is very pronounced and even dominant for samples with high surface-to-mass ratio.","lang":"eng"}],"type":"journal_article","publication":"physica status solidi (c)","doi":"10.1002/pssc.200880315","title":"Time-resolved photoluminescence study of mesoporous ZnO nanostructures","author":[{"first_name":"Michael","last_name":"Schwalm","full_name":"Schwalm, Michael"},{"last_name":"Horst","full_name":"Horst, Swantje","first_name":"Swantje"},{"full_name":"Chernikov, Alexej","last_name":"Chernikov","first_name":"Alexej"},{"first_name":"Wolfgang W.","full_name":"Rühle, Wolfgang W.","last_name":"Rühle"},{"first_name":"Stephan","last_name":"Lautenschläger","full_name":"Lautenschläger, Stephan"},{"full_name":"Klar, Peter J.","last_name":"Klar","first_name":"Peter J."},{"first_name":"Bruno K.","full_name":"Meyer, Bruno K.","last_name":"Meyer"},{"last_name":"Waitz","full_name":"Waitz, Thomas","first_name":"Thomas"},{"orcid":"0000-0003-1711-2722","last_name":"Tiemann","full_name":"Tiemann, Michael","id":"23547","first_name":"Michael"},{"first_name":"Sangam","last_name":"Chatterjee","full_name":"Chatterjee, Sangam"}],"date_created":"2021-10-09T05:32:42Z","date_updated":"2023-03-09T08:41:29Z","citation":{"mla":"Schwalm, Michael, et al. “Time-Resolved Photoluminescence Study of Mesoporous ZnO Nanostructures.” <i>Physica Status Solidi (c)</i>, 2009, pp. 542–45, doi:<a href=\"https://doi.org/10.1002/pssc.200880315\">10.1002/pssc.200880315</a>.","short":"M. Schwalm, S. Horst, A. Chernikov, W.W. Rühle, S. Lautenschläger, P.J. Klar, B.K. Meyer, T. Waitz, M. Tiemann, S. Chatterjee, Physica Status Solidi (c) (2009) 542–545.","bibtex":"@article{Schwalm_Horst_Chernikov_Rühle_Lautenschläger_Klar_Meyer_Waitz_Tiemann_Chatterjee_2009, title={Time-resolved photoluminescence study of mesoporous ZnO nanostructures}, DOI={<a href=\"https://doi.org/10.1002/pssc.200880315\">10.1002/pssc.200880315</a>}, journal={physica status solidi (c)}, author={Schwalm, Michael and Horst, Swantje and Chernikov, Alexej and Rühle, Wolfgang W. and Lautenschläger, Stephan and Klar, Peter J. and Meyer, Bruno K. and Waitz, Thomas and Tiemann, Michael and Chatterjee, Sangam}, year={2009}, pages={542–545} }","apa":"Schwalm, M., Horst, S., Chernikov, A., Rühle, W. W., Lautenschläger, S., Klar, P. J., Meyer, B. K., Waitz, T., Tiemann, M., &#38; Chatterjee, S. (2009). Time-resolved photoluminescence study of mesoporous ZnO nanostructures. <i>Physica Status Solidi (c)</i>, 542–545. <a href=\"https://doi.org/10.1002/pssc.200880315\">https://doi.org/10.1002/pssc.200880315</a>","ieee":"M. Schwalm <i>et al.</i>, “Time-resolved photoluminescence study of mesoporous ZnO nanostructures,” <i>physica status solidi (c)</i>, pp. 542–545, 2009, doi: <a href=\"https://doi.org/10.1002/pssc.200880315\">10.1002/pssc.200880315</a>.","chicago":"Schwalm, Michael, Swantje Horst, Alexej Chernikov, Wolfgang W. Rühle, Stephan Lautenschläger, Peter J. Klar, Bruno K. Meyer, Thomas Waitz, Michael Tiemann, and Sangam Chatterjee. “Time-Resolved Photoluminescence Study of Mesoporous ZnO Nanostructures.” <i>Physica Status Solidi (c)</i>, 2009, 542–45. <a href=\"https://doi.org/10.1002/pssc.200880315\">https://doi.org/10.1002/pssc.200880315</a>.","ama":"Schwalm M, Horst S, Chernikov A, et al. Time-resolved photoluminescence study of mesoporous ZnO nanostructures. <i>physica status solidi (c)</i>. Published online 2009:542-545. doi:<a href=\"https://doi.org/10.1002/pssc.200880315\">10.1002/pssc.200880315</a>"},"page":"542-545","year":"2009","publication_status":"published","publication_identifier":{"issn":["1610-1634","1610-1642"]},"quality_controlled":"1"},{"title":"Gas sensor based on ordered mesoporous In2O3","doi":"10.1016/j.tsf.2009.04.013","date_updated":"2023-03-09T08:43:33Z","author":[{"first_name":"T.","last_name":"Wagner","full_name":"Wagner, T."},{"first_name":"T.","full_name":"Sauerwald, T.","last_name":"Sauerwald"},{"full_name":"Kohl, C.-D.","last_name":"Kohl","first_name":"C.-D."},{"full_name":"Waitz, T.","last_name":"Waitz","first_name":"T."},{"full_name":"Weidmann, C.","last_name":"Weidmann","first_name":"C."},{"first_name":"Michael","last_name":"Tiemann","orcid":"0000-0003-1711-2722","id":"23547","full_name":"Tiemann, Michael"}],"date_created":"2021-10-09T05:28:49Z","year":"2009","page":"6170-6175","citation":{"apa":"Wagner, T., Sauerwald, T., Kohl, C.-D., Waitz, T., Weidmann, C., &#38; Tiemann, M. (2009). Gas sensor based on ordered mesoporous In2O3. <i>Thin Solid Films</i>, 6170–6175. <a href=\"https://doi.org/10.1016/j.tsf.2009.04.013\">https://doi.org/10.1016/j.tsf.2009.04.013</a>","short":"T. Wagner, T. Sauerwald, C.-D. Kohl, T. Waitz, C. Weidmann, M. Tiemann, Thin Solid Films (2009) 6170–6175.","bibtex":"@article{Wagner_Sauerwald_Kohl_Waitz_Weidmann_Tiemann_2009, title={Gas sensor based on ordered mesoporous In2O3}, DOI={<a href=\"https://doi.org/10.1016/j.tsf.2009.04.013\">10.1016/j.tsf.2009.04.013</a>}, journal={Thin Solid Films}, author={Wagner, T. and Sauerwald, T. and Kohl, C.-D. and Waitz, T. and Weidmann, C. and Tiemann, Michael}, year={2009}, pages={6170–6175} }","mla":"Wagner, T., et al. “Gas Sensor Based on Ordered Mesoporous In2O3.” <i>Thin Solid Films</i>, 2009, pp. 6170–75, doi:<a href=\"https://doi.org/10.1016/j.tsf.2009.04.013\">10.1016/j.tsf.2009.04.013</a>.","ama":"Wagner T, Sauerwald T, Kohl C-D, Waitz T, Weidmann C, Tiemann M. Gas sensor based on ordered mesoporous In2O3. <i>Thin Solid Films</i>. Published online 2009:6170-6175. doi:<a href=\"https://doi.org/10.1016/j.tsf.2009.04.013\">10.1016/j.tsf.2009.04.013</a>","ieee":"T. Wagner, T. Sauerwald, C.-D. Kohl, T. Waitz, C. Weidmann, and M. Tiemann, “Gas sensor based on ordered mesoporous In2O3,” <i>Thin Solid Films</i>, pp. 6170–6175, 2009, doi: <a href=\"https://doi.org/10.1016/j.tsf.2009.04.013\">10.1016/j.tsf.2009.04.013</a>.","chicago":"Wagner, T., T. Sauerwald, C.-D. Kohl, T. Waitz, C. Weidmann, and Michael Tiemann. “Gas Sensor Based on Ordered Mesoporous In2O3.” <i>Thin Solid Films</i>, 2009, 6170–75. <a href=\"https://doi.org/10.1016/j.tsf.2009.04.013\">https://doi.org/10.1016/j.tsf.2009.04.013</a>."},"publication_identifier":{"issn":["0040-6090"]},"quality_controlled":"1","publication_status":"published","article_type":"original","language":[{"iso":"eng"}],"extern":"1","_id":"25974","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","abstract":[{"lang":"eng","text":"We present the preparation of a semiconductor gas sensor based on ordered mesoporous In2O3. The In2O3 was synthesized by structure replication procedure from cubic KIT-6 silica. A detailed analysis of the morphology of the mesoporous powders as well as of the prepared sensing layer will be shown. Unique properties arise from the synthesis method of structure replication such as well defined porosity in the mesoporous regime and nanocrystallites with high thermal stability up to 450 °C. These properties are useful for the application in semiconducting gas sensors. Test measurements show sensitivity to methane gas in concentrations relevant for explosion prevention."}],"status":"public","publication":"Thin Solid Films","type":"journal_article"},{"title":"Halbleitende Metalloxide als Gassensoren im Chemieunterricht","doi":"10.1002/ckon.200910099","date_updated":"2023-03-09T08:43:58Z","author":[{"first_name":"Thomas","last_name":"Waitz","full_name":"Waitz, Thomas"},{"last_name":"Tiemann","orcid":"0000-0003-1711-2722","full_name":"Tiemann, Michael","id":"23547","first_name":"Michael"}],"date_created":"2021-10-09T05:31:54Z","year":"2009","page":"183-186","citation":{"chicago":"Waitz, Thomas, and Michael Tiemann. “Halbleitende Metalloxide Als Gassensoren Im Chemieunterricht.” <i>CHEMKON</i>, 2009, 183–86. <a href=\"https://doi.org/10.1002/ckon.200910099\">https://doi.org/10.1002/ckon.200910099</a>.","ieee":"T. Waitz and M. Tiemann, “Halbleitende Metalloxide als Gassensoren im Chemieunterricht,” <i>CHEMKON</i>, pp. 183–186, 2009, doi: <a href=\"https://doi.org/10.1002/ckon.200910099\">10.1002/ckon.200910099</a>.","ama":"Waitz T, Tiemann M. Halbleitende Metalloxide als Gassensoren im Chemieunterricht. <i>CHEMKON</i>. Published online 2009:183-186. doi:<a href=\"https://doi.org/10.1002/ckon.200910099\">10.1002/ckon.200910099</a>","apa":"Waitz, T., &#38; Tiemann, M. (2009). Halbleitende Metalloxide als Gassensoren im Chemieunterricht. <i>CHEMKON</i>, 183–186. <a href=\"https://doi.org/10.1002/ckon.200910099\">https://doi.org/10.1002/ckon.200910099</a>","bibtex":"@article{Waitz_Tiemann_2009, title={Halbleitende Metalloxide als Gassensoren im Chemieunterricht}, DOI={<a href=\"https://doi.org/10.1002/ckon.200910099\">10.1002/ckon.200910099</a>}, journal={CHEMKON}, author={Waitz, Thomas and Tiemann, Michael}, year={2009}, pages={183–186} }","short":"T. Waitz, M. Tiemann, CHEMKON (2009) 183–186.","mla":"Waitz, Thomas, and Michael Tiemann. “Halbleitende Metalloxide Als Gassensoren Im Chemieunterricht.” <i>CHEMKON</i>, 2009, pp. 183–86, doi:<a href=\"https://doi.org/10.1002/ckon.200910099\">10.1002/ckon.200910099</a>."},"quality_controlled":"1","publication_identifier":{"issn":["0944-5846"]},"publication_status":"published","article_type":"original","language":[{"iso":"eng"}],"extern":"1","_id":"25976","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","abstract":[{"text":"Halbleitende Metalloxid-Gassensoren werden sowohl im industriellen Bereich als auch im Haushalt zur Luftüberwachung verwendet. Die Funktionsweise basiert auf einer reversiblen Änderung des Sensorwiderstandes in Anwesenheit sowohl oxidierender als auch reduzierender Gase, die mit einfachen Mitteln gemessen werden kann. In diesem Artikel wird vorgestellt, wie sich die bei der Gasdetektion ablaufenden Vorgänge mit Hilfe des Ionosorptionsmodells in Kombination mit einem einfachen Festkörperbändermodell deuten lassen. Abschließend werden einfache, im Chemieunterricht zu realisierende Experimente mit Gassensoren präsentiert.","lang":"eng"}],"status":"public","publication":"CHEMKON","type":"journal_article"},{"title":"Critical evaluation of the state of iron oxide nanoparticles on different mesoporous silicas prepared by an impregnation method","doi":"10.1016/j.micromeso.2007.10.005","date_updated":"2023-03-09T08:44:27Z","date_created":"2021-10-09T06:53:42Z","author":[{"first_name":"Tanya","last_name":"Tsoncheva","full_name":"Tsoncheva, Tanya"},{"last_name":"Rosenholm","full_name":"Rosenholm, Jessica","first_name":"Jessica"},{"last_name":"Linden","full_name":"Linden, Mika","first_name":"Mika"},{"first_name":"Freddy","full_name":"Kleitz, Freddy","last_name":"Kleitz"},{"first_name":"Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","id":"23547","full_name":"Tiemann, Michael"},{"full_name":"Ivanova, Ljubomira","last_name":"Ivanova","first_name":"Ljubomira"},{"first_name":"Momtchil","full_name":"Dimitrov, Momtchil","last_name":"Dimitrov"},{"first_name":"Daniela","full_name":"Paneva, Daniela","last_name":"Paneva"},{"first_name":"Ivan","full_name":"Mitov, Ivan","last_name":"Mitov"},{"first_name":"Christo","last_name":"Minchev","full_name":"Minchev, Christo"}],"year":"2008","page":"327-337","citation":{"mla":"Tsoncheva, Tanya, et al. “Critical Evaluation of the State of Iron Oxide Nanoparticles on Different Mesoporous Silicas Prepared by an Impregnation Method.” <i>Microporous and Mesoporous Materials</i>, 2008, pp. 327–37, doi:<a href=\"https://doi.org/10.1016/j.micromeso.2007.10.005\">10.1016/j.micromeso.2007.10.005</a>.","bibtex":"@article{Tsoncheva_Rosenholm_Linden_Kleitz_Tiemann_Ivanova_Dimitrov_Paneva_Mitov_Minchev_2008, title={Critical evaluation of the state of iron oxide nanoparticles on different mesoporous silicas prepared by an impregnation method}, DOI={<a href=\"https://doi.org/10.1016/j.micromeso.2007.10.005\">10.1016/j.micromeso.2007.10.005</a>}, journal={Microporous and Mesoporous Materials}, author={Tsoncheva, Tanya and Rosenholm, Jessica and Linden, Mika and Kleitz, Freddy and Tiemann, Michael and Ivanova, Ljubomira and Dimitrov, Momtchil and Paneva, Daniela and Mitov, Ivan and Minchev, Christo}, year={2008}, pages={327–337} }","short":"T. Tsoncheva, J. Rosenholm, M. Linden, F. Kleitz, M. Tiemann, L. Ivanova, M. Dimitrov, D. Paneva, I. Mitov, C. Minchev, Microporous and Mesoporous Materials (2008) 327–337.","apa":"Tsoncheva, T., Rosenholm, J., Linden, M., Kleitz, F., Tiemann, M., Ivanova, L., Dimitrov, M., Paneva, D., Mitov, I., &#38; Minchev, C. (2008). Critical evaluation of the state of iron oxide nanoparticles on different mesoporous silicas prepared by an impregnation method. <i>Microporous and Mesoporous Materials</i>, 327–337. <a href=\"https://doi.org/10.1016/j.micromeso.2007.10.005\">https://doi.org/10.1016/j.micromeso.2007.10.005</a>","ieee":"T. Tsoncheva <i>et al.</i>, “Critical evaluation of the state of iron oxide nanoparticles on different mesoporous silicas prepared by an impregnation method,” <i>Microporous and Mesoporous Materials</i>, pp. 327–337, 2008, doi: <a href=\"https://doi.org/10.1016/j.micromeso.2007.10.005\">10.1016/j.micromeso.2007.10.005</a>.","chicago":"Tsoncheva, Tanya, Jessica Rosenholm, Mika Linden, Freddy Kleitz, Michael Tiemann, Ljubomira Ivanova, Momtchil Dimitrov, Daniela Paneva, Ivan Mitov, and Christo Minchev. “Critical Evaluation of the State of Iron Oxide Nanoparticles on Different Mesoporous Silicas Prepared by an Impregnation Method.” <i>Microporous and Mesoporous Materials</i>, 2008, 327–37. <a href=\"https://doi.org/10.1016/j.micromeso.2007.10.005\">https://doi.org/10.1016/j.micromeso.2007.10.005</a>.","ama":"Tsoncheva T, Rosenholm J, Linden M, et al. Critical evaluation of the state of iron oxide nanoparticles on different mesoporous silicas prepared by an impregnation method. <i>Microporous and Mesoporous Materials</i>. Published online 2008:327-337. doi:<a href=\"https://doi.org/10.1016/j.micromeso.2007.10.005\">10.1016/j.micromeso.2007.10.005</a>"},"quality_controlled":"1","publication_identifier":{"issn":["1387-1811"]},"publication_status":"published","article_type":"original","language":[{"iso":"eng"}],"extern":"1","_id":"25980","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","abstract":[{"text":"Mesoporous SBA-15 (space group p6mm), KIT-6 (Ia3d) and KIT-5 (Fm3m) silicas, exhibiting different 2-D and 3-D channel- or cage-like pore structure and pore dimensions have been used as supports for iron oxide nanoparticles. The iron modification of the silica was performed according to a frequently used impregnation technique from aqueous iron nitrate solution. The materials were characterized by nitrogen physisorption, X-ray diffraction, TEM–EDX, Moessbauer spectroscopy, and temperature-programmed reduction (TPR) and tested in the catalytic decomposition of methanol. It is established that the location and dispersion of iron oxide nanoparticles are affected by the pore topology of the support. The most homogeneously dispersed iron oxide nanoparticles are observed using silica host matrix exhibiting a 3-D channel-like structure and pore diameters about 7 nm, and the thus-obtained composites exhibit high catalytic activity and selectivity in methanol decomposition to CO and hydrogen. For all the samples, characterized with a low mesopore volume and small pore diameters/pore entrances, the formation of larger iron oxide particles, mainly located on the outer surface, is observed. Inhomogeneously dispersed iron oxide particles with a large fraction of isolated, strongly interacting with the support, iron species, and possessing low catalytic activity and usually high selectivity to methane, are found for the silicas with relatively larger pores/pore entrances.","lang":"eng"}],"status":"public","publication":"Microporous and Mesoporous Materials","type":"journal_article"},{"quality_controlled":"1","publication_identifier":{"issn":["1387-1811"]},"publication_status":"published","page":"575-582","citation":{"ama":"Roggenbuck J, Waitz T, Tiemann M. Synthesis of mesoporous metal oxides by structure replication: Strategies of impregnating porous matrices with metal salts. <i>Microporous and Mesoporous Materials</i>. Published online 2008:575-582. doi:<a href=\"https://doi.org/10.1016/j.micromeso.2007.12.018\">10.1016/j.micromeso.2007.12.018</a>","ieee":"J. Roggenbuck, T. Waitz, and M. Tiemann, “Synthesis of mesoporous metal oxides by structure replication: Strategies of impregnating porous matrices with metal salts,” <i>Microporous and Mesoporous Materials</i>, pp. 575–582, 2008, doi: <a href=\"https://doi.org/10.1016/j.micromeso.2007.12.018\">10.1016/j.micromeso.2007.12.018</a>.","chicago":"Roggenbuck, Jan, Thomas Waitz, and Michael Tiemann. “Synthesis of Mesoporous Metal Oxides by Structure Replication: Strategies of Impregnating Porous Matrices with Metal Salts.” <i>Microporous and Mesoporous Materials</i>, 2008, 575–82. <a href=\"https://doi.org/10.1016/j.micromeso.2007.12.018\">https://doi.org/10.1016/j.micromeso.2007.12.018</a>.","short":"J. Roggenbuck, T. Waitz, M. Tiemann, Microporous and Mesoporous Materials (2008) 575–582.","mla":"Roggenbuck, Jan, et al. “Synthesis of Mesoporous Metal Oxides by Structure Replication: Strategies of Impregnating Porous Matrices with Metal Salts.” <i>Microporous and Mesoporous Materials</i>, 2008, pp. 575–82, doi:<a href=\"https://doi.org/10.1016/j.micromeso.2007.12.018\">10.1016/j.micromeso.2007.12.018</a>.","bibtex":"@article{Roggenbuck_Waitz_Tiemann_2008, title={Synthesis of mesoporous metal oxides by structure replication: Strategies of impregnating porous matrices with metal salts}, DOI={<a href=\"https://doi.org/10.1016/j.micromeso.2007.12.018\">10.1016/j.micromeso.2007.12.018</a>}, journal={Microporous and Mesoporous Materials}, author={Roggenbuck, Jan and Waitz, Thomas and Tiemann, Michael}, year={2008}, pages={575–582} }","apa":"Roggenbuck, J., Waitz, T., &#38; Tiemann, M. (2008). Synthesis of mesoporous metal oxides by structure replication: Strategies of impregnating porous matrices with metal salts. <i>Microporous and Mesoporous Materials</i>, 575–582. <a href=\"https://doi.org/10.1016/j.micromeso.2007.12.018\">https://doi.org/10.1016/j.micromeso.2007.12.018</a>"},"year":"2008","date_created":"2021-10-09T06:52:34Z","author":[{"first_name":"Jan","full_name":"Roggenbuck, Jan","last_name":"Roggenbuck"},{"full_name":"Waitz, Thomas","last_name":"Waitz","first_name":"Thomas"},{"first_name":"Michael","full_name":"Tiemann, Michael","id":"23547","orcid":"0000-0003-1711-2722","last_name":"Tiemann"}],"date_updated":"2023-03-09T08:46:47Z","doi":"10.1016/j.micromeso.2007.12.018","title":"Synthesis of mesoporous metal oxides by structure replication: Strategies of impregnating porous matrices with metal salts","publication":"Microporous and Mesoporous Materials","type":"journal_article","status":"public","abstract":[{"lang":"eng","text":"Various measures to optimise the impregnation of mesoporous CMK-3 carbon and SBA-15 silica matrices with metal nitrates for the synthesis of mesoporous metal oxides by structure replication are investigated. The effect of surface modification of the matrix pores, the choice of a solvent with suitable polarity, and the concentration of the metal nitrate solution are studied in detail. The efficiency of pore loading is monitored by nitrogen physisorption measurements. The creation of polar functions at the pore surface of CMK-3 carbon is shown to increase the impregnation efficiency substantially while maximizing the pore wall polarity of SBA-15 silica by increasing the amount of free silanol groups does not have any significant impact. The choice of a less polar solvent (THF instead of water) has a positive effect on the wettability of CMK-3 carbon in the first impregnation cycle but turns out to be disadvantageous in the second cycle; a similar trend is observed for variation of the metal salt concentration."}],"department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","_id":"25979","extern":"1","language":[{"iso":"eng"}],"article_type":"original"},{"publication_identifier":{"issn":["1387-1811"]},"quality_controlled":"1","publication_status":"published","page":"339-346","citation":{"ieee":"T. Tsoncheva <i>et al.</i>, “Iron oxide nanoparticles supported on mesoporous MgO and CeO2: A comparative physicochemical and catalytic study,” <i>Microporous and Mesoporous Materials</i>, pp. 339–346, 2008, doi: <a href=\"https://doi.org/10.1016/j.micromeso.2007.06.021\">10.1016/j.micromeso.2007.06.021</a>.","chicago":"Tsoncheva, Tanya, Jan Roggenbuck, Michael Tiemann, Lyubomira Ivanova, Daniela Paneva, Ivan Mitov, and Christo Minchev. “Iron Oxide Nanoparticles Supported on Mesoporous MgO and CeO2: A Comparative Physicochemical and Catalytic Study.” <i>Microporous and Mesoporous Materials</i>, 2008, 339–46. <a href=\"https://doi.org/10.1016/j.micromeso.2007.06.021\">https://doi.org/10.1016/j.micromeso.2007.06.021</a>.","ama":"Tsoncheva T, Roggenbuck J, Tiemann M, et al. Iron oxide nanoparticles supported on mesoporous MgO and CeO2: A comparative physicochemical and catalytic study. <i>Microporous and Mesoporous Materials</i>. Published online 2008:339-346. doi:<a href=\"https://doi.org/10.1016/j.micromeso.2007.06.021\">10.1016/j.micromeso.2007.06.021</a>","apa":"Tsoncheva, T., Roggenbuck, J., Tiemann, M., Ivanova, L., Paneva, D., Mitov, I., &#38; Minchev, C. (2008). Iron oxide nanoparticles supported on mesoporous MgO and CeO2: A comparative physicochemical and catalytic study. <i>Microporous and Mesoporous Materials</i>, 339–346. <a href=\"https://doi.org/10.1016/j.micromeso.2007.06.021\">https://doi.org/10.1016/j.micromeso.2007.06.021</a>","short":"T. Tsoncheva, J. Roggenbuck, M. Tiemann, L. Ivanova, D. Paneva, I. Mitov, C. Minchev, Microporous and Mesoporous Materials (2008) 339–346.","bibtex":"@article{Tsoncheva_Roggenbuck_Tiemann_Ivanova_Paneva_Mitov_Minchev_2008, title={Iron oxide nanoparticles supported on mesoporous MgO and CeO2: A comparative physicochemical and catalytic study}, DOI={<a href=\"https://doi.org/10.1016/j.micromeso.2007.06.021\">10.1016/j.micromeso.2007.06.021</a>}, journal={Microporous and Mesoporous Materials}, author={Tsoncheva, Tanya and Roggenbuck, Jan and Tiemann, Michael and Ivanova, Lyubomira and Paneva, Daniela and Mitov, Ivan and Minchev, Christo}, year={2008}, pages={339–346} }","mla":"Tsoncheva, Tanya, et al. “Iron Oxide Nanoparticles Supported on Mesoporous MgO and CeO2: A Comparative Physicochemical and Catalytic Study.” <i>Microporous and Mesoporous Materials</i>, 2008, pp. 339–46, doi:<a href=\"https://doi.org/10.1016/j.micromeso.2007.06.021\">10.1016/j.micromeso.2007.06.021</a>."},"year":"2008","author":[{"first_name":"Tanya","full_name":"Tsoncheva, Tanya","last_name":"Tsoncheva"},{"full_name":"Roggenbuck, Jan","last_name":"Roggenbuck","first_name":"Jan"},{"first_name":"Michael","last_name":"Tiemann","orcid":"0000-0003-1711-2722","full_name":"Tiemann, Michael","id":"23547"},{"first_name":"Lyubomira","full_name":"Ivanova, Lyubomira","last_name":"Ivanova"},{"full_name":"Paneva, Daniela","last_name":"Paneva","first_name":"Daniela"},{"full_name":"Mitov, Ivan","last_name":"Mitov","first_name":"Ivan"},{"first_name":"Christo","last_name":"Minchev","full_name":"Minchev, Christo"}],"date_created":"2021-10-09T06:55:50Z","date_updated":"2023-03-09T08:44:52Z","doi":"10.1016/j.micromeso.2007.06.021","title":"Iron oxide nanoparticles supported on mesoporous MgO and CeO2: A comparative physicochemical and catalytic study","publication":"Microporous and Mesoporous Materials","type":"journal_article","status":"public","abstract":[{"text":"Iron (III) containing nanoparticles with superparamagnetic behaviour are prepared via deposition on various mesoporous supports (MgO, CeO2 and SBA-15). XRD, TEM-EDX, N2 physisorption, FTIR, and Moessbauer spectroscopy are used for their characterization. The reductive properties and catalytic behaviour in methanol decomposition of the materials are also studied. Depending on the chemical nature of the support, the predominant formation of: isolated iron species, strongly interacting with the support (for SBA-15), mixture of hematite and binary MgFe2O4 nanoparticles (for MgO) or almost homogeneously dispersed hematite particles (for CeO2) are observed. The state of iron species strongly affects their catalytic properties. The favorable effect of the support mesoporosity on the catalytic activity is most pronounced for the iron modified CeO2.","lang":"eng"}],"department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","_id":"25982","language":[{"iso":"eng"}],"extern":"1","article_type":"original"},{"language":[{"iso":"eng"}],"extern":"1","user_id":"23547","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"_id":"25983","status":"public","abstract":[{"lang":"eng","text":"Nanoporous semiconducting metal oxide materials (In2O3, WO3) with uniform pore systems, large specific surface areas (80 m2 g−1), and pore-wall crystallinity were prepared by structure replication, using KIT-6 silica as a template. The products show improved properties as gas sensors (for methane or butanone) as compared to non-porous samples. In addition, porous WO3 samples with comparable porosity (prepared by conventional ‘soft templating’, using pluronic P123), which are amorphous on the atomic length scale show poorer gas sensitivity, indicating that crystallinity is a crucial factor in the sensing process."}],"type":"book_chapter","publication":"Zeolites and related materials: Trends, targets and challenges, Proceedings of the 4th International FEZA Conference","doi":"10.1016/s0167-2991(08)80227-3","title":"New mesoporous metal oxides as gas sensors","date_created":"2021-10-09T06:56:56Z","author":[{"last_name":"Waitz","full_name":"Waitz, Thomas","first_name":"Thomas"},{"full_name":"Wagner, Thorsten","last_name":"Wagner","first_name":"Thorsten"},{"first_name":"Claus-Dieter","full_name":"Kohl, Claus-Dieter","last_name":"Kohl"},{"first_name":"Michael","full_name":"Tiemann, Michael","id":"23547","last_name":"Tiemann","orcid":"0000-0003-1711-2722"}],"date_updated":"2023-03-09T08:47:39Z","citation":{"mla":"Waitz, Thomas, et al. “New Mesoporous Metal Oxides as Gas Sensors.” <i>Zeolites and Related Materials: Trends, Targets and Challenges, Proceedings of the 4th International FEZA Conference</i>, 2008, doi:<a href=\"https://doi.org/10.1016/s0167-2991(08)80227-3\">10.1016/s0167-2991(08)80227-3</a>.","bibtex":"@inbook{Waitz_Wagner_Kohl_Tiemann_2008, title={New mesoporous metal oxides as gas sensors}, DOI={<a href=\"https://doi.org/10.1016/s0167-2991(08)80227-3\">10.1016/s0167-2991(08)80227-3</a>}, booktitle={Zeolites and related materials: Trends, targets and challenges, Proceedings of the 4th International FEZA Conference}, author={Waitz, Thomas and Wagner, Thorsten and Kohl, Claus-Dieter and Tiemann, Michael}, year={2008} }","short":"T. Waitz, T. Wagner, C.-D. Kohl, M. Tiemann, in: Zeolites and Related Materials: Trends, Targets and Challenges, Proceedings of the 4th International FEZA Conference, 2008.","apa":"Waitz, T., Wagner, T., Kohl, C.-D., &#38; Tiemann, M. (2008). New mesoporous metal oxides as gas sensors. In <i>Zeolites and related materials: Trends, targets and challenges, Proceedings of the 4th International FEZA Conference</i>. <a href=\"https://doi.org/10.1016/s0167-2991(08)80227-3\">https://doi.org/10.1016/s0167-2991(08)80227-3</a>","chicago":"Waitz, Thomas, Thorsten Wagner, Claus-Dieter Kohl, and Michael Tiemann. “New Mesoporous Metal Oxides as Gas Sensors.” In <i>Zeolites and Related Materials: Trends, Targets and Challenges, Proceedings of the 4th International FEZA Conference</i>, 2008. <a href=\"https://doi.org/10.1016/s0167-2991(08)80227-3\">https://doi.org/10.1016/s0167-2991(08)80227-3</a>.","ieee":"T. Waitz, T. Wagner, C.-D. Kohl, and M. Tiemann, “New mesoporous metal oxides as gas sensors,” in <i>Zeolites and related materials: Trends, targets and challenges, Proceedings of the 4th International FEZA Conference</i>, 2008.","ama":"Waitz T, Wagner T, Kohl C-D, Tiemann M. New mesoporous metal oxides as gas sensors. In: <i>Zeolites and Related Materials: Trends, Targets and Challenges, Proceedings of the 4th International FEZA Conference</i>. ; 2008. doi:<a href=\"https://doi.org/10.1016/s0167-2991(08)80227-3\">10.1016/s0167-2991(08)80227-3</a>"},"year":"2008","publication_status":"published","publication_identifier":{"issn":["0167-2991"]},"quality_controlled":"1"},{"abstract":[{"text":"The growth of ZnS nanoparticles during precipitation from aqueous solution is studied by in situ stopped-flow UV absorption spectroscopy at temperatures between 283 and 323 K. Particle growth is marked by substantial ripening during the first 60 ms. Kinetic data suggest that a ripening mechanism by coalescence (oriented attachment) is predominant over Ostwald ripening, although the latter seems to coexist to a significant degree at early temporal stages, predominantly at low temperatures.","lang":"eng"}],"status":"public","publication":"The Journal of Physical Chemistry C","type":"journal_article","article_type":"original","extern":"1","language":[{"iso":"eng"}],"_id":"25981","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"23547","year":"2008","page":"1463-1467","citation":{"bibtex":"@article{Tiemann_Marlow_Hartikainen_Weiss_Lindén_2008, title={Ripening Effects in ZnS Nanoparticle Growth}, DOI={<a href=\"https://doi.org/10.1021/jp077729f\">10.1021/jp077729f</a>}, journal={The Journal of Physical Chemistry C}, author={Tiemann, Michael and Marlow, Frank and Hartikainen, Juha and Weiss, Özlem and Lindén, Mika}, year={2008}, pages={1463–1467} }","short":"M. Tiemann, F. Marlow, J. Hartikainen, Ö. Weiss, M. Lindén, The Journal of Physical Chemistry C (2008) 1463–1467.","mla":"Tiemann, Michael, et al. “Ripening Effects in ZnS Nanoparticle Growth.” <i>The Journal of Physical Chemistry C</i>, 2008, pp. 1463–67, doi:<a href=\"https://doi.org/10.1021/jp077729f\">10.1021/jp077729f</a>.","apa":"Tiemann, M., Marlow, F., Hartikainen, J., Weiss, Ö., &#38; Lindén, M. (2008). Ripening Effects in ZnS Nanoparticle Growth. <i>The Journal of Physical Chemistry C</i>, 1463–1467. <a href=\"https://doi.org/10.1021/jp077729f\">https://doi.org/10.1021/jp077729f</a>","ama":"Tiemann M, Marlow F, Hartikainen J, Weiss Ö, Lindén M. Ripening Effects in ZnS Nanoparticle Growth. <i>The Journal of Physical Chemistry C</i>. Published online 2008:1463-1467. doi:<a href=\"https://doi.org/10.1021/jp077729f\">10.1021/jp077729f</a>","ieee":"M. Tiemann, F. Marlow, J. Hartikainen, Ö. Weiss, and M. Lindén, “Ripening Effects in ZnS Nanoparticle Growth,” <i>The Journal of Physical Chemistry C</i>, pp. 1463–1467, 2008, doi: <a href=\"https://doi.org/10.1021/jp077729f\">10.1021/jp077729f</a>.","chicago":"Tiemann, Michael, Frank Marlow, Juha Hartikainen, Özlem Weiss, and Mika Lindén. “Ripening Effects in ZnS Nanoparticle Growth.” <i>The Journal of Physical Chemistry C</i>, 2008, 1463–67. <a href=\"https://doi.org/10.1021/jp077729f\">https://doi.org/10.1021/jp077729f</a>."},"publication_identifier":{"issn":["1932-7447","1932-7455"]},"quality_controlled":"1","publication_status":"published","title":"Ripening Effects in ZnS Nanoparticle Growth","doi":"10.1021/jp077729f","date_updated":"2023-03-09T08:45:25Z","author":[{"full_name":"Tiemann, Michael","id":"23547","last_name":"Tiemann","orcid":"0000-0003-1711-2722","first_name":"Michael"},{"first_name":"Frank","full_name":"Marlow, Frank","last_name":"Marlow"},{"first_name":"Juha","full_name":"Hartikainen, Juha","last_name":"Hartikainen"},{"first_name":"Özlem","last_name":"Weiss","full_name":"Weiss, Özlem"},{"first_name":"Mika","last_name":"Lindén","full_name":"Lindén, Mika"}],"date_created":"2021-10-09T06:55:02Z"},{"publication_status":"published","publication_identifier":{"issn":["0897-4756","1520-5002"]},"quality_controlled":"1","citation":{"ieee":"M. Tiemann, “Repeated Templating,” <i>Chemistry of Materials</i>, pp. 961–971, 2008, doi: <a href=\"https://doi.org/10.1021/cm702050s\">10.1021/cm702050s</a>.","chicago":"Tiemann, Michael. “Repeated Templating.” <i>Chemistry of Materials</i>, 2008, 961–71. <a href=\"https://doi.org/10.1021/cm702050s\">https://doi.org/10.1021/cm702050s</a>.","ama":"Tiemann M. Repeated Templating. <i>Chemistry of Materials</i>. Published online 2008:961-971. doi:<a href=\"https://doi.org/10.1021/cm702050s\">10.1021/cm702050s</a>","apa":"Tiemann, M. (2008). Repeated Templating. <i>Chemistry of Materials</i>, 961–971. <a href=\"https://doi.org/10.1021/cm702050s\">https://doi.org/10.1021/cm702050s</a>","short":"M. Tiemann, Chemistry of Materials (2008) 961–971.","mla":"Tiemann, Michael. “Repeated Templating.” <i>Chemistry of Materials</i>, 2008, pp. 961–71, doi:<a href=\"https://doi.org/10.1021/cm702050s\">10.1021/cm702050s</a>.","bibtex":"@article{Tiemann_2008, title={Repeated Templating}, DOI={<a href=\"https://doi.org/10.1021/cm702050s\">10.1021/cm702050s</a>}, journal={Chemistry of Materials}, author={Tiemann, Michael}, year={2008}, pages={961–971} }"},"page":"961-971","year":"2008","author":[{"id":"23547","full_name":"Tiemann, Michael","orcid":"0000-0003-1711-2722","last_name":"Tiemann","first_name":"Michael"}],"date_created":"2021-10-09T06:51:34Z","date_updated":"2023-03-09T08:47:19Z","doi":"10.1021/cm702050s","title":"Repeated Templating","type":"journal_article","publication":"Chemistry of Materials","status":"public","abstract":[{"text":"In recent years, a lot of research activity has focused on the synthesis of new ordered porous materials by utilization of porous matrices as templates. Since the matrices are themselves created by templating procedures, the entire process can be envisaged as “repeated templating”. This review describes recent conceptual developments in the field of structure replication and summarizes the large number of publications on new functional materials prepared by this method.","lang":"eng"}],"user_id":"23547","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"_id":"25978","language":[{"iso":"eng"}],"extern":"1","article_type":"review"}]