---
_id: '22018'
abstract:
- lang: eng
text: Fused Deposition Modeling (FDM) parts are prone to process-related rough and
wavy surfaces with stair-stepping effects whenever the parts produced have sloped
or rounded geometries. These stair-stepping effects can be reduced by using a
smaller slice height, but complete elimination is not possible. In this paper,
FDM parts manufactured with the material ABS-M30 are finished using mass finishing
methods. The mass finishing is done with a trough vibrator, which is comparatively
gentle to the parts in comparison to other mass finishing technologies. The analysis
discusses the surface-smoothing effect of finishing time and intensity on various
part sizes and build orientations. In addition, the dimensional accuracy of the
parts after the finishing process is examined.
author:
- first_name: M.
full_name: Fischer, M.
last_name: Fischer
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Fischer M, Schöppner V. Finishing of ABS-M30 Parts Manufactured with Fused
Deposition Modeling with Focus on Dimensional Accuracy. In: 25th Annual International
Solid Freeform Fabrication Symposium. Vol 25. ; 2014:923-934. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf'
apa: Fischer, M., & Schöppner, V. (2014). Finishing of ABS-M30 Parts Manufactured
with Fused Deposition Modeling with Focus on Dimensional Accuracy. 25th Annual
International Solid Freeform Fabrication Symposium, 25, 923–934. http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
bibtex: '@inproceedings{Fischer_Schöppner_2014, title={Finishing of ABS-M30 Parts
Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy},
volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Fischer,
M. and Schöppner, Volker}, year={2014}, pages={923–934} }'
chicago: Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured
with Fused Deposition Modeling with Focus on Dimensional Accuracy.” In 25th
Annual International Solid Freeform Fabrication Symposium, 25:923–34, 2014.
http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
ieee: 'M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with
Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual
International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934,
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.'
mla: Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured
with Fused Deposition Modeling with Focus on Dimensional Accuracy.” 25th Annual
International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 923–34,
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
short: 'M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication
Symposium, 2014, pp. 923–934.'
date_created: 2021-05-07T13:22:57Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
intvolume: ' 25'
language:
- iso: eng
page: 923-934
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with
Focus on Dimensional Accuracy
type: conference
user_id: '70729'
volume: 25
year: '2014'
...
---
_id: '15966'
author:
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Andre
full_name: Riemer, Andre
last_name: Riemer
- first_name: Florian
full_name: Brenne, Florian
last_name: Brenne
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Hans Albert
full_name: Richard, Hans Albert
last_name: Richard
- first_name: Dieter
full_name: Schwarze, Dieter
last_name: Schwarze
citation:
ama: Niendorf T, Leuders S, Riemer A, et al. Functionally Graded Alloys Obtained
by Additive Manufacturing. Advanced Engineering Materials. 2014:857-861.
doi:10.1002/adem.201300579
apa: Niendorf, T., Leuders, S., Riemer, A., Brenne, F., Tröster, T., Richard, H.
A., & Schwarze, D. (2014). Functionally Graded Alloys Obtained by Additive
Manufacturing. Advanced Engineering Materials, 857–861. https://doi.org/10.1002/adem.201300579
bibtex: '@article{Niendorf_Leuders_Riemer_Brenne_Tröster_Richard_Schwarze_2014,
title={Functionally Graded Alloys Obtained by Additive Manufacturing}, DOI={10.1002/adem.201300579}, journal={Advanced
Engineering Materials}, author={Niendorf, Thomas and Leuders, Stefan and Riemer,
Andre and Brenne, Florian and Tröster, Thomas and Richard, Hans Albert and Schwarze,
Dieter}, year={2014}, pages={857–861} }'
chicago: Niendorf, Thomas, Stefan Leuders, Andre Riemer, Florian Brenne, Thomas
Tröster, Hans Albert Richard, and Dieter Schwarze. “Functionally Graded Alloys
Obtained by Additive Manufacturing.” Advanced Engineering Materials, 2014,
857–61. https://doi.org/10.1002/adem.201300579.
ieee: T. Niendorf et al., “Functionally Graded Alloys Obtained by Additive
Manufacturing,” Advanced Engineering Materials, pp. 857–861, 2014.
mla: Niendorf, Thomas, et al. “Functionally Graded Alloys Obtained by Additive Manufacturing.”
Advanced Engineering Materials, 2014, pp. 857–61, doi:10.1002/adem.201300579.
short: T. Niendorf, S. Leuders, A. Riemer, F. Brenne, T. Tröster, H.A. Richard,
D. Schwarze, Advanced Engineering Materials (2014) 857–861.
date_created: 2020-02-21T14:41:20Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1002/adem.201300579
language:
- iso: eng
page: 857-861
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
publication_status: published
status: public
title: Functionally Graded Alloys Obtained by Additive Manufacturing
type: journal_article
user_id: '72008'
year: '2014'
...
---
_id: '15967'
author:
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: S.
full_name: Leuders, S.
last_name: Leuders
- first_name: M.
full_name: Thöne, M.
last_name: Thöne
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
citation:
ama: Riemer A, Leuders S, Thöne M, Richard HA, Tröster T, Niendorf T. On the fatigue
crack growth behavior in 316L stainless steel manufactured by selective laser
melting. Engineering Fracture Mechanics. 2014:15-25. doi:10.1016/j.engfracmech.2014.03.008
apa: Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf,
T. (2014). On the fatigue crack growth behavior in 316L stainless steel manufactured
by selective laser melting. Engineering Fracture Mechanics, 15–25. https://doi.org/10.1016/j.engfracmech.2014.03.008
bibtex: '@article{Riemer_Leuders_Thöne_Richard_Tröster_Niendorf_2014, title={On
the fatigue crack growth behavior in 316L stainless steel manufactured by selective
laser melting}, DOI={10.1016/j.engfracmech.2014.03.008},
journal={Engineering Fracture Mechanics}, author={Riemer, A. and Leuders, S. and
Thöne, M. and Richard, H.A. and Tröster, Thomas and Niendorf, T.}, year={2014},
pages={15–25} }'
chicago: Riemer, A., S. Leuders, M. Thöne, H.A. Richard, Thomas Tröster, and T.
Niendorf. “On the Fatigue Crack Growth Behavior in 316L Stainless Steel Manufactured
by Selective Laser Melting.” Engineering Fracture Mechanics, 2014, 15–25.
https://doi.org/10.1016/j.engfracmech.2014.03.008.
ieee: A. Riemer, S. Leuders, M. Thöne, H. A. Richard, T. Tröster, and T. Niendorf,
“On the fatigue crack growth behavior in 316L stainless steel manufactured by
selective laser melting,” Engineering Fracture Mechanics, pp. 15–25, 2014.
mla: Riemer, A., et al. “On the Fatigue Crack Growth Behavior in 316L Stainless
Steel Manufactured by Selective Laser Melting.” Engineering Fracture Mechanics,
2014, pp. 15–25, doi:10.1016/j.engfracmech.2014.03.008.
short: A. Riemer, S. Leuders, M. Thöne, H.A. Richard, T. Tröster, T. Niendorf, Engineering
Fracture Mechanics (2014) 15–25.
date_created: 2020-02-21T14:41:54Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.engfracmech.2014.03.008
language:
- iso: eng
page: 15-25
publication: Engineering Fracture Mechanics
publication_identifier:
issn:
- 0013-7944
publication_status: published
status: public
title: On the fatigue crack growth behavior in 316L stainless steel manufactured by
selective laser melting
type: journal_article
user_id: '72008'
year: '2014'
...
---
_id: '16097'
author:
- first_name: M.
full_name: Klein, M.
last_name: Klein
- first_name: D.
full_name: Hülsbusch, D.
last_name: Hülsbusch
- first_name: F.
full_name: Walther, F.
last_name: Walther
- first_name: M.
full_name: Bartsch, M.
last_name: Bartsch
- first_name: J.
full_name: Hausmann, J.
last_name: Hausmann
- first_name: M.
full_name: Frantz, M.
last_name: Frantz
- first_name: C.
full_name: Lauter, C.
last_name: Lauter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Klein M, Hülsbusch D, Walther F, et al. Characterization of the corrosion
influence on the fatigue behavior of intrinsic CFRP-steel-hybrids. In: ; 2014:188-193.'
apa: 'Klein, M., Hülsbusch, D., Walther, F., Bartsch, M., Hausmann, J., Frantz,
M., … Tröster, T. (2014). Characterization of the corrosion influence on the fatigue
behavior of intrinsic CFRP-steel-hybrids (pp. 188–193). Presented at the International
Conference: Euro Hybrid Materials and Structures, Stade.'
bibtex: '@inproceedings{Klein_Hülsbusch_Walther_Bartsch_Hausmann_Frantz_Lauter_Tröster_2014,
title={Characterization of the corrosion influence on the fatigue behavior of
intrinsic CFRP-steel-hybrids}, author={Klein, M. and Hülsbusch, D. and Walther,
F. and Bartsch, M. and Hausmann, J. and Frantz, M. and Lauter, C. and Tröster,
Thomas}, year={2014}, pages={188–193} }'
chicago: Klein, M., D. Hülsbusch, F. Walther, M. Bartsch, J. Hausmann, M. Frantz,
C. Lauter, and Thomas Tröster. “Characterization of the Corrosion Influence on
the Fatigue Behavior of Intrinsic CFRP-Steel-Hybrids,” 188–93, 2014.
ieee: 'M. Klein et al., “Characterization of the corrosion influence on the
fatigue behavior of intrinsic CFRP-steel-hybrids,” presented at the International
Conference: Euro Hybrid Materials and Structures, Stade, 2014, pp. 188–193.'
mla: Klein, M., et al. Characterization of the Corrosion Influence on the Fatigue
Behavior of Intrinsic CFRP-Steel-Hybrids. 2014, pp. 188–93.
short: 'M. Klein, D. Hülsbusch, F. Walther, M. Bartsch, J. Hausmann, M. Frantz,
C. Lauter, T. Tröster, in: 2014, pp. 188–193.'
conference:
end_date: 2014-04-11
location: Stade
name: 'International Conference: Euro Hybrid Materials and Structures'
start_date: 2014-04-10
date_created: 2020-02-26T09:41:20Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
page: 188-193
publication_identifier:
isbn:
- 978-3-88355-402-0
status: public
title: Characterization of the corrosion influence on the fatigue behavior of intrinsic
CFRP-steel-hybrids
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16099'
author:
- first_name: M
full_name: Frantz, M
last_name: Frantz
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: J.
full_name: Hausmann, J.
last_name: Hausmann
- first_name: M.
full_name: Bartsch, M.
last_name: Bartsch
- first_name: D
full_name: Hülsbusch, D
last_name: Hülsbusch
- first_name: F.
full_name: Walther, F.
last_name: Walther
citation:
ama: 'Frantz M, Lauter C, Tröster T, et al. Efficient manufacturing of hybrid structures
consisting of steel and CFRP with using residual heat / Effiziente Herstellung
von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung. In: ;
2014.'
apa: Frantz, M., Lauter, C., Tröster, T., Hausmann, J., Bartsch, M., Hülsbusch,
D., & Walther, F. (2014). Efficient manufacturing of hybrid structures consisting
of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen
aus Stahl und CFK mithilfe von Restwärmeausnutzung. Presented at the New Developments
in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Stuttgart.
bibtex: '@inproceedings{Frantz_Lauter_Tröster_Hausmann_Bartsch_Hülsbusch_Walther_2014,
title={Efficient manufacturing of hybrid structures consisting of steel and CFRP
with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl
und CFK mithilfe von Restwärmeausnutzung}, author={Frantz, M and Lauter, Christian
and Tröster, Thomas and Hausmann, J. and Bartsch, M. and Hülsbusch, D and Walther,
F.}, year={2014} }'
chicago: Frantz, M, Christian Lauter, Thomas Tröster, J. Hausmann, M. Bartsch, D
Hülsbusch, and F. Walther. “Efficient Manufacturing of Hybrid Structures Consisting
of Steel and CFRP with Using Residual Heat / Effiziente Herstellung von Hybridbauteilen
Aus Stahl Und CFK Mithilfe von Restwärmeausnutzung,” 2014.
ieee: M. Frantz et al., “Efficient manufacturing of hybrid structures consisting
of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen
aus Stahl und CFK mithilfe von Restwärmeausnutzung,” presented at the New Developments
in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Stuttgart,
2014.
mla: Frantz, M., et al. Efficient Manufacturing of Hybrid Structures Consisting
of Steel and CFRP with Using Residual Heat / Effiziente Herstellung von Hybridbauteilen
Aus Stahl Und CFK Mithilfe von Restwärmeausnutzung. 2014.
short: 'M. Frantz, C. Lauter, T. Tröster, J. Hausmann, M. Bartsch, D. Hülsbusch,
F. Walther, in: 2014.'
conference:
end_date: 2014-05-14
location: Stuttgart
name: New Developments in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung)
start_date: 2014-05-13
date_created: 2020-02-26T10:47:40Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-88355-400-6
status: public
title: Efficient manufacturing of hybrid structures consisting of steel and CFRP with
using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK
mithilfe von Restwärmeausnutzung
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16120'
author:
- first_name: Holger
full_name: Block, Holger
last_name: Block
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Block H, Marten T, Tröster T. Crash simulation of high strength automotive
components using advanced failure models. In: ; 2014.'
apa: Block, H., Marten, T., & Tröster, T. (2014). Crash simulation of high strength
automotive components using advanced failure models. Presented at the 4th international
conference on steels in cars and trucks, Braunschweig.
bibtex: '@inproceedings{Block_Marten_Tröster_2014, title={Crash simulation of high
strength automotive components using advanced failure models}, author={Block,
Holger and Marten, Thorsten and Tröster, Thomas}, year={2014} }'
chicago: Block, Holger, Thorsten Marten, and Thomas Tröster. “Crash Simulation of
High Strength Automotive Components Using Advanced Failure Models,” 2014.
ieee: H. Block, T. Marten, and T. Tröster, “Crash simulation of high strength automotive
components using advanced failure models,” presented at the 4th international
conference on steels in cars and trucks, Braunschweig, 2014.
mla: Block, Holger, et al. Crash Simulation of High Strength Automotive Components
Using Advanced Failure Models. 2014.
short: 'H. Block, T. Marten, T. Tröster, in: 2014.'
conference:
end_date: 2014-06-19
location: Braunschweig
name: 4th international conference on steels in cars and trucks
start_date: 2014-06-15
date_created: 2020-02-27T14:58:53Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Crash simulation of high strength automotive components using advanced failure
models
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16122'
article_number: '52'
author:
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Joerg
full_name: Niewel, Joerg
last_name: Niewel
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Lauter C, Niewel J, Tröster T. Quasistatic and crash tests of steel-CFRP hybrid
pillar structures for automotive applications. International Journal of Automotive
Composites. 2014. doi:10.1504/ijautoc.2014.064127
apa: Lauter, C., Niewel, J., & Tröster, T. (2014). Quasistatic and crash tests
of steel-CFRP hybrid pillar structures for automotive applications. International
Journal of Automotive Composites. https://doi.org/10.1504/ijautoc.2014.064127
bibtex: '@article{Lauter_Niewel_Tröster_2014, title={Quasistatic and crash tests
of steel-CFRP hybrid pillar structures for automotive applications}, DOI={10.1504/ijautoc.2014.064127},
number={52}, journal={International Journal of Automotive Composites}, author={Lauter,
Christian and Niewel, Joerg and Tröster, Thomas}, year={2014} }'
chicago: Lauter, Christian, Joerg Niewel, and Thomas Tröster. “Quasistatic and Crash
Tests of Steel-CFRP Hybrid Pillar Structures for Automotive Applications.” International
Journal of Automotive Composites, 2014. https://doi.org/10.1504/ijautoc.2014.064127.
ieee: C. Lauter, J. Niewel, and T. Tröster, “Quasistatic and crash tests of steel-CFRP
hybrid pillar structures for automotive applications,” International Journal
of Automotive Composites, 2014.
mla: Lauter, Christian, et al. “Quasistatic and Crash Tests of Steel-CFRP Hybrid
Pillar Structures for Automotive Applications.” International Journal of Automotive
Composites, 52, 2014, doi:10.1504/ijautoc.2014.064127.
short: C. Lauter, J. Niewel, T. Tröster, International Journal of Automotive Composites
(2014).
date_created: 2020-02-27T15:03:51Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1504/ijautoc.2014.064127
language:
- iso: eng
publication: International Journal of Automotive Composites
publication_identifier:
issn:
- 2051-8218
- 2051-8226
publication_status: published
status: public
title: Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive
applications
type: journal_article
user_id: '72008'
year: '2014'
...
---
_id: '16127'
author:
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
citation:
ama: 'Lauter C. Entwicklung und Herstellung von Hybridbauteilen aus Metallen
und Faserverbundkunststoffen für den Leichtbau im Automobil. Vol 4. Aachen:
Shaker Verlag; 2014.'
apa: 'Lauter, C. (2014). Entwicklung und Herstellung von Hybridbauteilen aus
Metallen und Faserverbundkunststoffen für den Leichtbau im Automobil (Vol.
4). Aachen: Shaker Verlag.'
bibtex: '@book{Lauter_2014, place={Aachen}, title={Entwicklung und Herstellung von
Hybridbauteilen aus Metallen und Faserverbundkunststoffen für den Leichtbau im
Automobil}, volume={4}, publisher={Shaker Verlag}, author={Lauter, Christian},
year={2014} }'
chicago: 'Lauter, Christian. Entwicklung und Herstellung von Hybridbauteilen
aus Metallen und Faserverbundkunststoffen für den Leichtbau im Automobil.
Vol. 4. Aachen: Shaker Verlag, 2014.'
ieee: 'C. Lauter, Entwicklung und Herstellung von Hybridbauteilen aus Metallen
und Faserverbundkunststoffen für den Leichtbau im Automobil, vol. 4. Aachen:
Shaker Verlag, 2014.'
mla: Lauter, Christian. Entwicklung und Herstellung von Hybridbauteilen aus Metallen
und Faserverbundkunststoffen für den Leichtbau im Automobil. Vol. 4, Shaker
Verlag, 2014.
short: C. Lauter, Entwicklung und Herstellung von Hybridbauteilen aus Metallen und
Faserverbundkunststoffen für den Leichtbau im Automobil, Shaker Verlag, Aachen,
2014.
date_created: 2020-02-27T15:11:45Z
date_updated: 2022-01-06T06:52:44Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
intvolume: ' 4'
language:
- iso: ger
place: Aachen
publication_identifier:
isbn:
- 978-3-8440-2996-3
publisher: Shaker Verlag
status: public
supervisor:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
title: Entwicklung und Herstellung von Hybridbauteilen aus Metallen und Faserverbundkunststoffen
für den Leichtbau im Automobil
type: dissertation
user_id: '72008'
volume: 4
year: '2014'
...
---
_id: '16128'
author:
- first_name: Holger
full_name: Block, Holger
last_name: Block
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Nathalie
full_name: Weiß Borkowski, Nathalie
last_name: Weiß Borkowski
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Block H, Marten T, Weiß Borkowski N, Tröster T. Crash performance of the new
press hardenable steel 15MnB6. In: ; 2014.'
apa: Block, H., Marten, T., Weiß Borkowski, N., & Tröster, T. (2014). Crash
performance of the new press hardenable steel 15MnB6. Presented at the 3rd MATFEM
conference, Hohenkammer.
bibtex: '@inproceedings{Block_Marten_Weiß Borkowski_Tröster_2014, title={Crash performance
of the new press hardenable steel 15MnB6}, author={Block, Holger and Marten, Thorsten
and Weiß Borkowski, Nathalie and Tröster, Thomas}, year={2014} }'
chicago: Block, Holger, Thorsten Marten, Nathalie Weiß Borkowski, and Thomas Tröster.
“Crash Performance of the New Press Hardenable Steel 15MnB6,” 2014.
ieee: H. Block, T. Marten, N. Weiß Borkowski, and T. Tröster, “Crash performance
of the new press hardenable steel 15MnB6,” presented at the 3rd MATFEM conference,
Hohenkammer, 2014.
mla: Block, Holger, et al. Crash Performance of the New Press Hardenable Steel
15MnB6. 2014.
short: 'H. Block, T. Marten, N. Weiß Borkowski, T. Tröster, in: 2014.'
conference:
location: Hohenkammer
name: 3rd MATFEM conference
start_date: 2014-10-21
date_created: 2020-02-27T15:14:38Z
date_updated: 2022-01-06T06:52:44Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Crash performance of the new press hardenable steel 15MnB6
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16129'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Dominik
full_name: Flore, Dominik
last_name: Flore
- first_name: Simon
full_name: Pöhler, Simon
last_name: Pöhler
- first_name: Kim Henning
full_name: Sauerland, Kim Henning
last_name: Sauerland
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Reuter C, Flore D, Pöhler S, Sauerland KH, Tröster T. Numerical simulation
of the energy absorption of fiber-reinforced plastics. In: ; 2014.'
apa: 'Reuter, C., Flore, D., Pöhler, S., Sauerland, K. H., & Tröster, T. (2014).
Numerical simulation of the energy absorption of fiber-reinforced plastics. Presented
at the Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process
Chain, Leipzig.'
bibtex: '@inproceedings{Reuter_Flore_Pöhler_Sauerland_Tröster_2014, title={Numerical
simulation of the energy absorption of fiber-reinforced plastics}, author={Reuter,
Corin and Flore, Dominik and Pöhler, Simon and Sauerland, Kim Henning and Tröster,
Thomas}, year={2014} }'
chicago: Reuter, Corin, Dominik Flore, Simon Pöhler, Kim Henning Sauerland, and
Thomas Tröster. “Numerical Simulation of the Energy Absorption of Fiber-Reinforced
Plastics,” 2014.
ieee: 'C. Reuter, D. Flore, S. Pöhler, K. H. Sauerland, and T. Tröster, “Numerical
simulation of the energy absorption of fiber-reinforced plastics,” presented at
the Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process Chain,
Leipzig, 2014.'
mla: Reuter, Corin, et al. Numerical Simulation of the Energy Absorption of Fiber-Reinforced
Plastics. 2014.
short: 'C. Reuter, D. Flore, S. Pöhler, K.H. Sauerland, T. Tröster, in: 2014.'
conference:
end_date: 2014-10-29
location: Leipzig
name: 'Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process Chain'
start_date: 2014-10-28
date_created: 2020-02-27T15:19:56Z
date_updated: 2022-01-06T06:52:44Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Numerical simulation of the energy absorption of fiber-reinforced plastics
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16255'
author:
- first_name: S.
full_name: Leuders, S.
last_name: Leuders
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: H. A.
full_name: Richard, H. A.
last_name: Richard
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
citation:
ama: 'Leuders S, Riemer A, Richard HA, Tröster T, Niendorf T. Selective-Laser-Melting
materials under cyclic loading: Influence of process-inherent defects on the initiation
and propagation of fatigue cracks. In: ; 2014.'
apa: 'Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Niendorf, T. (2014).
Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent
defects on the initiation and propagation of fatigue cracks. Presented at the
25th Colloquium on Fatigue Mechanisms, Erlangen, Germany.'
bibtex: '@inproceedings{Leuders_Riemer_Richard_Tröster_Niendorf_2014, title={Selective-Laser-Melting
materials under cyclic loading: Influence of process-inherent defects on the initiation
and propagation of fatigue cracks}, author={Leuders, S. and Riemer, A. and Richard,
H. A. and Tröster, Thomas and Niendorf, T.}, year={2014} }'
chicago: 'Leuders, S., A. Riemer, H. A. Richard, Thomas Tröster, and T. Niendorf.
“Selective-Laser-Melting Materials under Cyclic Loading: Influence of Process-Inherent
Defects on the Initiation and Propagation of Fatigue Cracks,” 2014.'
ieee: 'S. Leuders, A. Riemer, H. A. Richard, T. Tröster, and T. Niendorf, “Selective-Laser-Melting
materials under cyclic loading: Influence of process-inherent defects on the initiation
and propagation of fatigue cracks,” presented at the 25th Colloquium on Fatigue
Mechanisms, Erlangen, Germany, 2014.'
mla: 'Leuders, S., et al. Selective-Laser-Melting Materials under Cyclic Loading:
Influence of Process-Inherent Defects on the Initiation and Propagation of Fatigue
Cracks. 2014.'
short: 'S. Leuders, A. Riemer, H.A. Richard, T. Tröster, T. Niendorf, in: 2014.'
conference:
end_date: 2014-03-28
location: Erlangen, Germany
name: 25th Colloquium on Fatigue Mechanisms
start_date: 2014-03-27
date_created: 2020-03-09T07:40:04Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: 'Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent
defects on the initiation and propagation of fatigue cracks'
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16256'
author:
- first_name: S.
full_name: Leuders, S.
last_name: Leuders
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: F.
full_name: Brenne, F.
last_name: Brenne
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: H. A.
full_name: Richard, H. A.
last_name: Richard
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
citation:
ama: 'Leuders S, Tröster T, Brenne F, Riemer A, Richard HA, Niendorf T. Evaluation
of the effect of defects on the mechanical performance of components manufactured
by selective laser melting. In: ; 2014.'
apa: 'Leuders, S., Tröster, T., Brenne, F., Riemer, A., Richard, H. A., & Niendorf,
T. (2014). Evaluation of the effect of defects on the mechanical performance of
components manufactured by selective laser melting. Presented at the American
Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy
and Surface Finish in Additive Manufacturing, San Francisco, California, USA.'
bibtex: '@inproceedings{Leuders_Tröster_Brenne_Riemer_Richard_Niendorf_2014, title={Evaluation
of the effect of defects on the mechanical performance of components manufactured
by selective laser melting}, author={Leuders, S. and Tröster, Thomas and Brenne,
F. and Riemer, A. and Richard, H. A. and Niendorf, T.}, year={2014} }'
chicago: Leuders, S., Thomas Tröster, F. Brenne, A. Riemer, H. A. Richard, and T.
Niendorf. “Evaluation of the Effect of Defects on the Mechanical Performance of
Components Manufactured by Selective Laser Melting,” 2014.
ieee: 'S. Leuders, T. Tröster, F. Brenne, A. Riemer, H. A. Richard, and T. Niendorf,
“Evaluation of the effect of defects on the mechanical performance of components
manufactured by selective laser melting,” presented at the American Society for
Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy and Surface
Finish in Additive Manufacturing, San Francisco, California, USA, 2014.'
mla: Leuders, S., et al. Evaluation of the Effect of Defects on the Mechanical
Performance of Components Manufactured by Selective Laser Melting. 2014.
short: 'S. Leuders, T. Tröster, F. Brenne, A. Riemer, H.A. Richard, T. Niendorf,
in: 2014.'
conference:
end_date: 2014-04-16
location: San Francisco, California, USA
name: 'American Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional
Accuracy and Surface Finish in Additive Manufacturing'
start_date: 2014-04-13
date_created: 2020-03-09T07:42:49Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Evaluation of the effect of defects on the mechanical performance of components
manufactured by selective laser melting
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '16257'
author:
- first_name: S.
full_name: Leuders, S.
last_name: Leuders
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: H. A.
full_name: Richard, H. A.
last_name: Richard
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
citation:
ama: 'Leuders S, Tröster T, Riemer A, Richard HA, Niendorf T. On the mechanical
performance of structures manufactured by selective laser melting: Damage initiation
and propagation. In: ; 2014.'
apa: 'Leuders, S., Tröster, T., Riemer, A., Richard, H. A., & Niendorf, T. (2014).
On the mechanical performance of structures manufactured by selective laser melting:
Damage initiation and propagation. Presented at the Additive Manufacturing with
Powder Metallurgy Conference, Orlando, Florida, USA.'
bibtex: '@inproceedings{Leuders_Tröster_Riemer_Richard_Niendorf_2014, title={On
the mechanical performance of structures manufactured by selective laser melting:
Damage initiation and propagation}, author={Leuders, S. and Tröster, Thomas and
Riemer, A. and Richard, H. A. and Niendorf, T.}, year={2014} }'
chicago: 'Leuders, S., Thomas Tröster, A. Riemer, H. A. Richard, and T. Niendorf.
“On the Mechanical Performance of Structures Manufactured by Selective Laser Melting:
Damage Initiation and Propagation,” 2014.'
ieee: 'S. Leuders, T. Tröster, A. Riemer, H. A. Richard, and T. Niendorf, “On the
mechanical performance of structures manufactured by selective laser melting:
Damage initiation and propagation,” presented at the Additive Manufacturing with
Powder Metallurgy Conference, Orlando, Florida, USA, 2014.'
mla: 'Leuders, S., et al. On the Mechanical Performance of Structures Manufactured
by Selective Laser Melting: Damage Initiation and Propagation. 2014.'
short: 'S. Leuders, T. Tröster, A. Riemer, H.A. Richard, T. Niendorf, in: 2014.'
conference:
end_date: 2014-05-20
location: Orlando, Florida, USA
name: Additive Manufacturing with Powder Metallurgy Conference
start_date: 2014-05-18
date_created: 2020-03-09T07:45:09Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: 'On the mechanical performance of structures manufactured by selective laser
melting: Damage initiation and propagation'
type: conference
user_id: '72008'
year: '2014'
...
---
_id: '22030'
abstract:
- lang: eng
text: Parts produced by Fused Deposition Modeling (FDM) tend to have rough and undulating
surfaces with staircase effects on rounded and slanting areas of the part. This
is due to the characteristics of the process. In many fields of application, high
demands are made on the optical quality of the part. An improvement in the surface
quality of FDM parts made of Ultem*9085 can be achieved through post-treatment
with a mass finishing process. In this paper, FDM specimens are post-treated in
a disk finishing unit. Influences of the mass finishing process are analyzed with
regard to the dependence of surface quality on the various process parameters
and on the finishing medium, grinding time and grinding speed. The finishing efficiency
depends on the finishing media and decreases for lower finishing time. For all
media a lower disk velocity results a smaller grinding effect, but there are clearly
differences between the finishing media. The paper also discusses effects of the
grinding process on the mechanical properties of the parts. Especially small part
geometries and parts build in z-direction tend to break during the finishing process.
author:
- first_name: M.
full_name: Fischer, M.
last_name: Fischer
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Fischer M, Schöppner V. Effects of a mass finishing process on parts produced
from Ultem 9085 by Fused Deposition Modeling. In: ANTEC. SPE: Society of
Plastics Engineers; 2014:2331-2336.'
apa: Fischer, M., & Schöppner, V. (2014). Effects of a mass finishing process
on parts produced from Ultem 9085 by Fused Deposition Modeling. ANTEC,
2331–2336.
bibtex: '@inproceedings{Fischer_Schöppner_2014, title={Effects of a mass finishing
process on parts produced from Ultem 9085 by Fused Deposition Modeling}, booktitle={ANTEC},
publisher={SPE: Society of Plastics Engineers}, author={Fischer, M. and Schöppner,
Volker}, year={2014}, pages={2331–2336} }'
chicago: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process
on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” In ANTEC,
2331–36. SPE: Society of Plastics Engineers, 2014.'
ieee: M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts
produced from Ultem 9085 by Fused Deposition Modeling,” in ANTEC, 2014,
pp. 2331–2336.
mla: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on
Parts Produced from Ultem 9085 by Fused Deposition Modeling.” ANTEC, SPE:
Society of Plastics Engineers, 2014, pp. 2331–36.'
short: 'M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers,
2014, pp. 2331–2336.'
date_created: 2021-05-07T13:23:11Z
date_updated: 2022-04-25T08:03:55Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
language:
- iso: eng
page: 2331-2336
publication: ANTEC
publication_identifier:
isbn:
- 978-1-63439-708-7
publisher: 'SPE: Society of Plastics Engineers'
quality_controlled: '1'
status: public
title: Effects of a mass finishing process on parts produced from Ultem 9085 by Fused
Deposition Modeling
type: conference
user_id: '70729'
year: '2014'
...
---
_id: '22021'
abstract:
- lang: eng
text: Additive production techniques have the advantage of manufacturing parts without
needing a forming tool. One of the most used additive manufacturing processes
is "Fused Deposition Modeling" (FDM) which allows the production of prototypes
and end-use parts. Due to the manufacture layer by layer, also complex part geometries
can be created in one working step. Furthermore, lightweight parts with specific
inner core structures can be manufactured in order to achieve good weightrelated
strength properties. In this paper the mechanical behavior of lightweight parts
manufactured with the 3D production system Fortus 400mc from Stratasys and the
material Polyetherimide (PEI) with the trade name Ultem*9085 is analyzed. The
test specimens were built up with different inner structures and building directions.
Therefore, test specimens with known lightweight core geometries (e.g. corrugated
and honeycomb cores) were designed. A four-point bending test was conducted to
analyze the strength properties as well as the weight-related strength properties.
Additionally the influence of the structure width, the structure wall thickness
and the top layer thickness was analyzed using a honeycomb structure.
author:
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: S.
full_name: Josupeit, S.
last_name: Josupeit
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: E.
full_name: Klemp, E.
last_name: Klemp
citation:
ama: 'Bagsik A, Josupeit S, Schöppner V, Klemp E. Mechanical Analysis of Lightweight
Constructions manufactured with Fused Deposition Modeling. In: 29th International
Conference of the Polymer Processing Society. Vol 29. American Institute of
Physics ; 2014:696-701. doi:10.1063/1.4873874'
apa: Bagsik, A., Josupeit, S., Schöppner, V., & Klemp, E. (2014). Mechanical
Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling.
29th International Conference of the Polymer Processing Society, 29,
696–701. https://doi.org/10.1063/1.4873874
bibtex: '@inproceedings{Bagsik_Josupeit_Schöppner_Klemp_2014, title={Mechanical
Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling},
volume={29}, DOI={10.1063/1.4873874},
booktitle={29th International Conference of the Polymer Processing Society}, publisher={American
Institute of Physics }, author={Bagsik, A. and Josupeit, S. and Schöppner, Volker
and Klemp, E.}, year={2014}, pages={696–701} }'
chicago: Bagsik, A., S. Josupeit, Volker Schöppner, and E. Klemp. “Mechanical Analysis
of Lightweight Constructions Manufactured with Fused Deposition Modeling.” In
29th International Conference of the Polymer Processing Society, 29:696–701.
American Institute of Physics , 2014. https://doi.org/10.1063/1.4873874.
ieee: 'A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis
of Lightweight Constructions manufactured with Fused Deposition Modeling,” in
29th International Conference of the Polymer Processing Society, 2014,
vol. 29, pp. 696–701, doi: 10.1063/1.4873874.'
mla: Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured
with Fused Deposition Modeling.” 29th International Conference of the Polymer
Processing Society, vol. 29, American Institute of Physics , 2014, pp. 696–701,
doi:10.1063/1.4873874.
short: 'A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference
of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.'
date_created: 2021-05-07T13:23:00Z
date_updated: 2022-04-25T08:05:29Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.4873874
intvolume: ' 29'
language:
- iso: eng
page: 696-701
publication: 29th International Conference of the Polymer Processing Society
publisher: 'American Institute of Physics '
quality_controlled: '1'
status: public
title: Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition
Modeling
type: conference
user_id: '70729'
volume: 29
year: '2014'
...
---
_id: '15965'
abstract:
- lang: eng
text: Abstract
author:
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: Leuders S, Lieneke T, Lammers S, Tröster T, Niendorf T. On the fatigue properties
of metals manufactured by selective laser melting – The role of ductility. Journal
of Materials Research. Published online 2014:1911-1919. doi:10.1557/jmr.2014.157
apa: Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014).
On the fatigue properties of metals manufactured by selective laser melting –
The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
bibtex: '@article{Leuders_Lieneke_Lammers_Tröster_Niendorf_2014, title={On the fatigue
properties of metals manufactured by selective laser melting – The role of ductility},
DOI={10.1557/jmr.2014.157},
journal={Journal of Materials Research}, author={Leuders, Stefan and Lieneke,
Tobias and Lammers, Stefan and Tröster, Thomas and Niendorf, Thomas}, year={2014},
pages={1911–1919} }'
chicago: Leuders, Stefan, Tobias Lieneke, Stefan Lammers, Thomas Tröster, and Thomas
Niendorf. “On the Fatigue Properties of Metals Manufactured by Selective Laser
Melting – The Role of Ductility.” Journal of Materials Research, 2014,
1911–19. https://doi.org/10.1557/jmr.2014.157.
ieee: 'S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the
fatigue properties of metals manufactured by selective laser melting – The role
of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi:
10.1557/jmr.2014.157.'
mla: Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by
Selective Laser Melting – The Role of Ductility.” Journal of Materials Research,
2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
short: S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials
Research (2014) 1911–1919.
date_created: 2020-02-21T14:40:39Z
date_updated: 2024-03-27T15:25:07Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '146'
- _id: '219'
doi: 10.1557/jmr.2014.157
language:
- iso: eng
page: 1911-1919
publication: Journal of Materials Research
publication_identifier:
issn:
- 0884-2914
- 2044-5326
publication_status: published
status: public
title: On the fatigue properties of metals manufactured by selective laser melting
– The role of ductility
type: journal_article
user_id: '13956'
year: '2014'
...
---
_id: '24708'
author:
- first_name: Kai-Uwe
full_name: Widany, Kai-Uwe
last_name: Widany
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Widany K-U, Mahnken R. Approximation of the dual problem for error estimation
in inelastic problems. PAMM. Published online 2014:273-274. doi:10.1002/pamm.201410124
apa: Widany, K.-U., & Mahnken, R. (2014). Approximation of the dual problem
for error estimation in inelastic problems. PAMM, 273–274. https://doi.org/10.1002/pamm.201410124
bibtex: '@article{Widany_Mahnken_2014, title={Approximation of the dual problem
for error estimation in inelastic problems}, DOI={10.1002/pamm.201410124},
journal={PAMM}, author={Widany, Kai-Uwe and Mahnken, Rolf}, year={2014}, pages={273–274}
}'
chicago: Widany, Kai-Uwe, and Rolf Mahnken. “Approximation of the Dual Problem for
Error Estimation in Inelastic Problems.” PAMM, 2014, 273–74. https://doi.org/10.1002/pamm.201410124.
ieee: 'K.-U. Widany and R. Mahnken, “Approximation of the dual problem for error
estimation in inelastic problems,” PAMM, pp. 273–274, 2014, doi: 10.1002/pamm.201410124.'
mla: Widany, Kai-Uwe, and Rolf Mahnken. “Approximation of the Dual Problem for Error
Estimation in Inelastic Problems.” PAMM, 2014, pp. 273–74, doi:10.1002/pamm.201410124.
short: K.-U. Widany, R. Mahnken, PAMM (2014) 273–274.
date_created: 2021-09-20T11:33:38Z
date_updated: 2023-01-24T14:58:32Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1002/pamm.201410124
language:
- iso: eng
page: 273-274
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publication_status: published
status: public
title: Approximation of the dual problem for error estimation in inelastic problems
type: journal_article
user_id: '335'
year: '2014'
...
---
_id: '24702'
author:
- first_name: Chun
full_name: Cheng, Chun
last_name: Cheng
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Eckart
full_name: Uhlmann, Eckart
last_name: Uhlmann
- first_name: Ivan Mitkov
full_name: Ivanov, Ivan Mitkov
last_name: Ivanov
citation:
ama: Cheng C, Mahnken R, Uhlmann E, Ivanov IM. Macroscopic and mesoscopic modeling
based on the concept of generalized stresses for cutting simulation. PAMM.
Published online 2014:419-420. doi:10.1002/pamm.201410197
apa: Cheng, C., Mahnken, R., Uhlmann, E., & Ivanov, I. M. (2014). Macroscopic
and mesoscopic modeling based on the concept of generalized stresses for cutting
simulation. PAMM, 419–420. https://doi.org/10.1002/pamm.201410197
bibtex: '@article{Cheng_Mahnken_Uhlmann_Ivanov_2014, title={Macroscopic and mesoscopic
modeling based on the concept of generalized stresses for cutting simulation},
DOI={10.1002/pamm.201410197},
journal={PAMM}, author={Cheng, Chun and Mahnken, Rolf and Uhlmann, Eckart and
Ivanov, Ivan Mitkov}, year={2014}, pages={419–420} }'
chicago: Cheng, Chun, Rolf Mahnken, Eckart Uhlmann, and Ivan Mitkov Ivanov. “Macroscopic
and Mesoscopic Modeling Based on the Concept of Generalized Stresses for Cutting
Simulation.” PAMM, 2014, 419–20. https://doi.org/10.1002/pamm.201410197.
ieee: 'C. Cheng, R. Mahnken, E. Uhlmann, and I. M. Ivanov, “Macroscopic and mesoscopic
modeling based on the concept of generalized stresses for cutting simulation,”
PAMM, pp. 419–420, 2014, doi: 10.1002/pamm.201410197.'
mla: Cheng, Chun, et al. “Macroscopic and Mesoscopic Modeling Based on the Concept
of Generalized Stresses for Cutting Simulation.” PAMM, 2014, pp. 419–20,
doi:10.1002/pamm.201410197.
short: C. Cheng, R. Mahnken, E. Uhlmann, I.M. Ivanov, PAMM (2014) 419–420.
date_created: 2021-09-20T11:16:11Z
date_updated: 2023-01-24T15:00:14Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1002/pamm.201410197
language:
- iso: eng
page: 419-420
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publication_status: published
status: public
title: Macroscopic and mesoscopic modeling based on the concept of generalized stresses
for cutting simulation
type: journal_article
user_id: '335'
year: '2014'
...
---
_id: '24701'
author:
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Dammann C, Mahnken R. A macroscopic consitutive model on induced anisotropy
for polymers with weighting functions. PAMM. Published online 2014:387-388.
doi:10.1002/pamm.201410181
apa: Dammann, C., & Mahnken, R. (2014). A macroscopic consitutive model on induced
anisotropy for polymers with weighting functions. PAMM, 387–388. https://doi.org/10.1002/pamm.201410181
bibtex: '@article{Dammann_Mahnken_2014, title={A macroscopic consitutive model on
induced anisotropy for polymers with weighting functions}, DOI={10.1002/pamm.201410181},
journal={PAMM}, author={Dammann, Christian and Mahnken, Rolf}, year={2014}, pages={387–388}
}'
chicago: Dammann, Christian, and Rolf Mahnken. “A Macroscopic Consitutive Model
on Induced Anisotropy for Polymers with Weighting Functions.” PAMM, 2014,
387–88. https://doi.org/10.1002/pamm.201410181.
ieee: 'C. Dammann and R. Mahnken, “A macroscopic consitutive model on induced anisotropy
for polymers with weighting functions,” PAMM, pp. 387–388, 2014, doi: 10.1002/pamm.201410181.'
mla: Dammann, Christian, and Rolf Mahnken. “A Macroscopic Consitutive Model on Induced
Anisotropy for Polymers with Weighting Functions.” PAMM, 2014, pp. 387–88,
doi:10.1002/pamm.201410181.
short: C. Dammann, R. Mahnken, PAMM (2014) 387–388.
date_created: 2021-09-20T11:15:03Z
date_updated: 2023-01-24T15:00:52Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1002/pamm.201410181
language:
- iso: eng
page: 387-388
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publication_status: published
status: public
title: A macroscopic consitutive model on induced anisotropy for polymers with weighting
functions
type: journal_article
user_id: '335'
year: '2014'
...
---
_id: '24707'
abstract:
- lang: eng
text: "Abstract\r\n The alignment
of polymer chains is a well known microstructural evolution effect due to straining
of polymers. This has a drastic influence on the macroscopic properties of the
initially isotropic material. In this work, cold forming is performed at room
temperature on a tensile testing machine. Polycarbonate films are examined in
two loading phases. In the first phase, the specimen is loaded to induce anisotropy,
and in the second, it is re-loaded, while the material direction is varied. The
investigations are supported by an optical measurement system to gain knowledge
about the inhomogeneous material behavior in the initial loading phase and about
the anisotropic homogeneous behavior during the re-loading phase. Two dimensional
strain contours are obtained from the test data. Additionally, we propose a method
for approximation of the macroscopic true stress and compare the results with
a common approach based on volume consistency. In the future, the test data will
set a basis for parameter identification of constitutive equations taking into
account a combination of inhomogenous and homogenous material behavior, exhibiting
strain induced anisotropy."
author:
- first_name: C.
full_name: Dammann, C.
last_name: Dammann
- first_name: Ismail
full_name: Caylak, Ismail
id: '75'
last_name: Caylak
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Dammann C, Caylak I, Mahnken R. Experimental Investigation of PC-Films Using
Optical Measurements. International Polymer Processing. Published online
2014:260-271. doi:10.3139/217.2848
apa: Dammann, C., Caylak, I., & Mahnken, R. (2014). Experimental Investigation
of PC-Films Using Optical Measurements. International Polymer Processing,
260–271. https://doi.org/10.3139/217.2848
bibtex: '@article{Dammann_Caylak_Mahnken_2014, title={Experimental Investigation
of PC-Films Using Optical Measurements}, DOI={10.3139/217.2848},
journal={International Polymer Processing}, author={Dammann, C. and Caylak, Ismail
and Mahnken, Rolf}, year={2014}, pages={260–271} }'
chicago: Dammann, C., Ismail Caylak, and Rolf Mahnken. “Experimental Investigation
of PC-Films Using Optical Measurements.” International Polymer Processing,
2014, 260–71. https://doi.org/10.3139/217.2848.
ieee: 'C. Dammann, I. Caylak, and R. Mahnken, “Experimental Investigation of PC-Films
Using Optical Measurements,” International Polymer Processing, pp. 260–271,
2014, doi: 10.3139/217.2848.'
mla: Dammann, C., et al. “Experimental Investigation of PC-Films Using Optical Measurements.”
International Polymer Processing, 2014, pp. 260–71, doi:10.3139/217.2848.
short: C. Dammann, I. Caylak, R. Mahnken, International Polymer Processing (2014)
260–271.
date_created: 2021-09-20T11:32:58Z
date_updated: 2023-01-24T15:06:40Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.3139/217.2848
language:
- iso: eng
page: 260-271
publication: International Polymer Processing
publication_identifier:
issn:
- 2195-8602
- 0930-777X
publication_status: published
quality_controlled: '1'
status: public
title: Experimental Investigation of PC-Films Using Optical Measurements
type: journal_article
user_id: '335'
year: '2014'
...