---
_id: '15984'
abstract:
- lang: eng
text: A new and promising approach to the reduction of greenhouse gas emissions
is the use of improved lightweight constructions based on multi-material systems
comprising sheet metal with local carbon fibre reinforced plastic (CFRP) reinforcements.
The CFRP is used to reinforce highly stressed areas and can be aligned to specific
load cases. The locally restricted application of CFRP means that the material
costs can be effectively reduced by comparison to parts made entirely of CFRP
on account of the expensive production process requiring the use of an autoclave.
These parts are thus only used in high-priced products. The production of hybrid
CFRP steel structures in a mass production process calls for an efficient production
technology. Current research work within the scope of a collaborative research
project running at the University of Paderborn is concentrating on the development
of manufacturing processes for the efficient production of automotive structural
components made up of sheet metal blanks with local CFRP patches. The project
is focusing especially on basic research into the production of industrial components.
The aim of the investigation is to create an efficient and controlled process
for producing CFRP reinforced steel structures from semi-finished hybrid steel-CFRP
material. This includes tool concepts and an appropriate process design to permit
short process times. The basis of an efficient process design is an in-depth knowledge
of the material behaviour, and hence a thorough characterisation was performed.
Material parameters were determined for both simulation and forming. For this,
monotonic tensile, shear and bending tests were conducted using both uncured prepregs
and cured CFRP specimens. To achieve an accurate simulation of the forming process,
a special material model for carbon fibre prepregs has been developed which also
includes the anisotropic material behaviour resulting from fibre orientation,
the viscoelastic behaviour caused by the matrix and the hardening effects that
prevail during curing. Recent results show good qualitative agreement and will
be presented in this paper. In order to control the properties of the hybrid components,
four different tool concepts for the prepreg press technology have been developed
and tested. The concepts are presented and the results of experimental investigations
are discussed in this paper.
author:
- first_name: Hans Christian
full_name: Schmidt, Hans Christian
last_name: Schmidt
- first_name: Ulf
full_name: Damerow, Ulf
last_name: Damerow
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Bernhard
full_name: Gorny, Bernhard
last_name: Gorny
- first_name: Frederik
full_name: Hankeln, Frederik
id: '6695'
last_name: Hankeln
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Hans Jürgen
full_name: Maier, Hans Jürgen
last_name: Maier
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Schmidt HC, Damerow U, Lauter C, et al. Manufacturing Processes for Combined
Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP
Reinforcements. Key Engineering Materials. Published online 2012:295-300.
doi:10.4028/www.scientific.net/kem.504-506.295
apa: Schmidt, H. C., Damerow, U., Lauter, C., Gorny, B., Hankeln, F., Homberg, W.,
Tröster, T., Maier, H. J., & Mahnken, R. (2012). Manufacturing Processes for
Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local
CFRP Reinforcements. Key Engineering Materials, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295
bibtex: '@article{Schmidt_Damerow_Lauter_Gorny_Hankeln_Homberg_Tröster_Maier_Mahnken_2012,
title={Manufacturing Processes for Combined Forming of Multi-Material Structures
Consisting of Sheet Metal and Local CFRP Reinforcements}, DOI={10.4028/www.scientific.net/kem.504-506.295},
journal={Key Engineering Materials}, author={Schmidt, Hans Christian and Damerow,
Ulf and Lauter, Christian and Gorny, Bernhard and Hankeln, Frederik and Homberg,
Werner and Tröster, Thomas and Maier, Hans Jürgen and Mahnken, Rolf}, year={2012},
pages={295–300} }'
chicago: Schmidt, Hans Christian, Ulf Damerow, Christian Lauter, Bernhard Gorny,
Frederik Hankeln, Werner Homberg, Thomas Tröster, Hans Jürgen Maier, and Rolf
Mahnken. “Manufacturing Processes for Combined Forming of Multi-Material Structures
Consisting of Sheet Metal and Local CFRP Reinforcements.” Key Engineering Materials,
2012, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295.
ieee: 'H. C. Schmidt et al., “Manufacturing Processes for Combined Forming
of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements,”
Key Engineering Materials, pp. 295–300, 2012, doi: 10.4028/www.scientific.net/kem.504-506.295.'
mla: Schmidt, Hans Christian, et al. “Manufacturing Processes for Combined Forming
of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.”
Key Engineering Materials, 2012, pp. 295–300, doi:10.4028/www.scientific.net/kem.504-506.295.
short: H.C. Schmidt, U. Damerow, C. Lauter, B. Gorny, F. Hankeln, W. Homberg, T.
Tröster, H.J. Maier, R. Mahnken, Key Engineering Materials (2012) 295–300.
date_created: 2020-02-24T08:35:41Z
date_updated: 2023-05-24T08:14:30Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.4028/www.scientific.net/kem.504-506.295
language:
- iso: eng
page: 295-300
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
quality_controlled: '1'
status: public
title: Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting
of Sheet Metal and Local CFRP Reinforcements
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '15986'
author:
- first_name: B.
full_name: Gorny, B.
last_name: Gorny
- first_name: Frederik
full_name: Hankeln, Frederik
id: '6695'
last_name: Hankeln
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: H. C.
full_name: Schmidt, H. C.
last_name: Schmidt
- first_name: U.
full_name: Damerow, U.
last_name: Damerow
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: H. J.
full_name: Maier, H. J.
last_name: Maier
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Gorny B, Hankeln F, Lauter C, et al. Simulation and manufacturing of deep
drawn parts reinforced by carbon fibre prepregs. In: ; 2012.'
apa: Gorny, B., Hankeln, F., Lauter, C., Schmidt, H. C., Damerow, U., Mahnken, R.,
Maier, H. J., Tröster, T., & Homberg, W. (2012). Simulation and manufacturing
of deep drawn parts reinforced by carbon fibre prepregs. 1st International
Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS),
Turin, Italy.
bibtex: '@inproceedings{Gorny_Hankeln_Lauter_Schmidt_Damerow_Mahnken_Maier_Tröster_Homberg_2012,
title={Simulation and manufacturing of deep drawn parts reinforced by carbon fibre
prepregs}, author={Gorny, B. and Hankeln, Frederik and Lauter, Christian and Schmidt,
H. C. and Damerow, U. and Mahnken, Rolf and Maier, H. J. and Tröster, Thomas and
Homberg, Werner}, year={2012} }'
chicago: Gorny, B., Frederik Hankeln, Christian Lauter, H. C. Schmidt, U. Damerow,
Rolf Mahnken, H. J. Maier, Thomas Tröster, and Werner Homberg. “Simulation and
Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs,” 2012.
ieee: B. Gorny et al., “Simulation and manufacturing of deep drawn parts
reinforced by carbon fibre prepregs,” presented at the 1st International Conference
on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy,
2012.
mla: Gorny, B., et al. Simulation and Manufacturing of Deep Drawn Parts Reinforced
by Carbon Fibre Prepregs. 2012.
short: 'B. Gorny, F. Hankeln, C. Lauter, H.C. Schmidt, U. Damerow, R. Mahnken, H.J.
Maier, T. Tröster, W. Homberg, in: 2012.'
conference:
end_date: 2012-06-20
location: Turin, Italy
name: 1st International Conference on Mechanics of Nano, Micro and Macro Composite
Structures (ICNMMCS)
start_date: 2012-06-18
date_created: 2020-02-24T08:55:25Z
date_updated: 2023-05-24T08:14:45Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Simulation and manufacturing of deep drawn parts reinforced by carbon fibre
prepregs
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '16010'
author:
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Rinje
full_name: Brandis, Rinje
last_name: Brandis
- first_name: Jürgen
full_name: Gausemeier, Jürgen
id: '163'
last_name: Gausemeier
citation:
ama: Lauter C, Tröster T, Brandis R, Gausemeier J. Methodik für die Produktentstehung
hybrider Leichtbaustrukturen. Lightweight Design. 2012;5:50-56. doi:10.1365/s35725-013-0137-4
apa: Lauter, C., Tröster, T., Brandis, R., & Gausemeier, J. (2012). Methodik
für die Produktentstehung hybrider Leichtbaustrukturen. Lightweight Design,
5, 50–56. https://doi.org/10.1365/s35725-013-0137-4
bibtex: '@article{Lauter_Tröster_Brandis_Gausemeier_2012, title={Methodik für die
Produktentstehung hybrider Leichtbaustrukturen}, volume={5}, DOI={10.1365/s35725-013-0137-4},
journal={Lightweight Design}, author={Lauter, Christian and Tröster, Thomas and
Brandis, Rinje and Gausemeier, Jürgen}, year={2012}, pages={50–56} }'
chicago: 'Lauter, Christian, Thomas Tröster, Rinje Brandis, and Jürgen Gausemeier.
“Methodik für die Produktentstehung hybrider Leichtbaustrukturen.” Lightweight
Design 5 (2012): 50–56. https://doi.org/10.1365/s35725-013-0137-4.'
ieee: 'C. Lauter, T. Tröster, R. Brandis, and J. Gausemeier, “Methodik für die Produktentstehung
hybrider Leichtbaustrukturen,” Lightweight Design, vol. 5, pp. 50–56, 2012,
doi: 10.1365/s35725-013-0137-4.'
mla: Lauter, Christian, et al. “Methodik für die Produktentstehung hybrider Leichtbaustrukturen.”
Lightweight Design, vol. 5, 2012, pp. 50–56, doi:10.1365/s35725-013-0137-4.
short: C. Lauter, T. Tröster, R. Brandis, J. Gausemeier, Lightweight Design 5 (2012)
50–56.
date_created: 2020-02-24T12:26:57Z
date_updated: 2023-05-24T08:13:36Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1365/s35725-013-0137-4
intvolume: ' 5'
language:
- iso: ger
page: 50-56
publication: Lightweight Design
publication_identifier:
issn:
- 1865-4819
- 2192-8738
publication_status: published
status: public
title: Methodik für die Produktentstehung hybrider Leichtbaustrukturen
type: journal_article
user_id: '72008'
volume: 5
year: '2012'
...
---
_id: '16012'
author:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Stefan
full_name: Adelbert, Stefan
last_name: Adelbert
- first_name: Abdel
full_name: Kadim, Abdel
last_name: Kadim
citation:
ama: Tröster T, Marten T, Adelbert S, Kadim A. P 850 – Wirbelbetterwärmung von
Platinen für das Presshärten. Abschlussberichte Forschungsvereinigung Stahlanwendung
e.V., Verlag und Vertriebsgesellschaft mbH; 2012.
apa: Tröster, T., Marten, T., Adelbert, S., & Kadim, A. (2012). P 850 – Wirbelbetterwärmung
von Platinen für das Presshärten. Abschlussberichte Forschungsvereinigung
Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH.
bibtex: '@book{Tröster_Marten_Adelbert_Kadim_2012, place={Düsseldorf}, series={Forschung
für die Praxis}, title={P 850 – Wirbelbetterwärmung von Platinen für das Presshärten},
publisher={Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag
und Vertriebsgesellschaft mbH}, author={Tröster, Thomas and Marten, Thorsten and
Adelbert, Stefan and Kadim, Abdel}, year={2012}, collection={Forschung für die
Praxis} }'
chicago: 'Tröster, Thomas, Thorsten Marten, Stefan Adelbert, and Abdel Kadim. P
850 – Wirbelbetterwärmung von Platinen für das Presshärten. Forschung für
die Praxis. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung
e.V., Verlag und Vertriebsgesellschaft mbH, 2012.'
ieee: 'T. Tröster, T. Marten, S. Adelbert, and A. Kadim, P 850 – Wirbelbetterwärmung
von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung
Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, 2012.'
mla: Tröster, Thomas, et al. P 850 – Wirbelbetterwärmung von Platinen für das
Presshärten. Abschlussberichte Forschungsvereinigung Stahlanwendung e.V.,
Verlag und Vertriebsgesellschaft mbH, 2012.
short: T. Tröster, T. Marten, S. Adelbert, A. Kadim, P 850 – Wirbelbetterwärmung
von Platinen für das Presshärten, Abschlussberichte Forschungsvereinigung Stahlanwendung
e.V., Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2012.
date_created: 2020-02-24T12:38:28Z
date_updated: 2026-02-16T16:01:23Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
place: Düsseldorf
publication_identifier:
isbn:
- '978-3-942541-18-3 '
publication_status: published
publisher: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und
Vertriebsgesellschaft mbH
report_number: P850
series_title: Forschung für die Praxis
status: public
title: P 850 – Wirbelbetterwärmung von Platinen für das Presshärten
type: report
user_id: '338'
year: '2012'
...
---
_id: '52422'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Benjamin
full_name: Rommel, Benjamin
last_name: Rommel
citation:
ama: 'Schlüter A, Rommel B. Auf dem besten Weg zu neuen Lösungen: Kunststoffverarbeitung.
In: Hesselbach J, ed. Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele. Springer Vieweg; 2012:290-314.'
apa: 'Schlüter, A., & Rommel, B. (2012). Auf dem besten Weg zu neuen Lösungen:
Kunststoffverarbeitung. In J. Hesselbach (Ed.), Energie- und klimaeffiziente
Produktion: Grundlagen, Leitlinien und Praxisbeispiele (pp. 290–314). Springer
Vieweg.'
bibtex: '@inbook{Schlüter_Rommel_2012, place={Wiesbaden}, title={Auf dem besten
Weg zu neuen Lösungen: Kunststoffverarbeitung}, booktitle={Energie- und klimaeffiziente
Produktion: Grundlagen, Leitlinien und Praxisbeispiele}, publisher={Springer Vieweg},
author={Schlüter, Alexander and Rommel, Benjamin}, editor={Hesselbach, Jens},
year={2012}, pages={290–314} }'
chicago: 'Schlüter, Alexander, and Benjamin Rommel. “Auf dem besten Weg zu neuen
Lösungen: Kunststoffverarbeitung.” In Energie- und klimaeffiziente Produktion:
Grundlagen, Leitlinien und Praxisbeispiele, edited by Jens Hesselbach, 290–314.
Wiesbaden: Springer Vieweg, 2012.'
ieee: 'A. Schlüter and B. Rommel, “Auf dem besten Weg zu neuen Lösungen: Kunststoffverarbeitung,”
in Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele,
J. Hesselbach, Ed. Wiesbaden: Springer Vieweg, 2012, pp. 290–314.'
mla: 'Schlüter, Alexander, and Benjamin Rommel. “Auf dem besten Weg zu neuen Lösungen:
Kunststoffverarbeitung.” Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele, edited by Jens Hesselbach, Springer Vieweg,
2012, pp. 290–314.'
short: 'A. Schlüter, B. Rommel, in: J. Hesselbach (Ed.), Energie- und klimaeffiziente
Produktion: Grundlagen, Leitlinien und Praxisbeispiele, Springer Vieweg, Wiesbaden,
2012, pp. 290–314.'
date_created: 2024-03-09T11:04:39Z
date_updated: 2025-04-01T08:13:39Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
editor:
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
extern: '1'
language:
- iso: ger
page: 290-314
place: Wiesbaden
publication: 'Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und
Praxisbeispiele'
publication_identifier:
unknown:
- 978-3-8348-0448-8
publication_status: published
publisher: Springer Vieweg
status: public
title: 'Auf dem besten Weg zu neuen Lösungen: Kunststoffverarbeitung'
type: book_chapter
user_id: '22833'
year: '2012'
...
---
_id: '52418'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Benjamin
full_name: Rommel, Benjamin
last_name: Rommel
- first_name: Wilhelm
full_name: Bleeke, Wilhelm
last_name: Bleeke
citation:
ama: 'Schlüter A, Rommel B, Bleeke W. Energieströme messen. In: Hesselbach J, ed.
Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele
. Springer Vieweg; 2012.'
apa: 'Schlüter, A., Rommel, B., & Bleeke, W. (2012). Energieströme messen. In
J. Hesselbach (Ed.), Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien
und Praxisbeispiele . Springer Vieweg.'
bibtex: '@inbook{Schlüter_Rommel_Bleeke_2012, place={Wiesbaden}, title={Energieströme
messen}, booktitle={Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien
und Praxisbeispiele }, publisher={Springer Vieweg}, author={Schlüter, Alexander
and Rommel, Benjamin and Bleeke, Wilhelm}, editor={Hesselbach, Jens}, year={2012}
}'
chicago: 'Schlüter, Alexander, Benjamin Rommel, and Wilhelm Bleeke. “Energieströme
messen.” In Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien
und Praxisbeispiele , edited by Jens Hesselbach. Wiesbaden: Springer Vieweg,
2012.'
ieee: 'A. Schlüter, B. Rommel, and W. Bleeke, “Energieströme messen,” in Energie-
und klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele ,
J. Hesselbach, Ed. Wiesbaden: Springer Vieweg, 2012.'
mla: 'Schlüter, Alexander, et al. “Energieströme messen.” Energie- und klimaeffiziente
Produktion: Grundlagen, Leitlinien und Praxisbeispiele , edited by Jens Hesselbach,
Springer Vieweg, 2012.'
short: 'A. Schlüter, B. Rommel, W. Bleeke, in: J. Hesselbach (Ed.), Energie- und
klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele , Springer
Vieweg, Wiesbaden, 2012.'
date_created: 2024-03-09T10:45:19Z
date_updated: 2025-04-01T08:23:26Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
editor:
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
extern: '1'
language:
- iso: ger
place: Wiesbaden
publication: 'Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und
Praxisbeispiele '
publication_identifier:
isbn:
- 978-3-8348-0448-8
publication_status: published
publisher: Springer Vieweg
status: public
title: Energieströme messen
type: book_chapter
user_id: '22833'
year: '2012'
...
---
_id: '52225'
article_type: original
author:
- first_name: Mirko
full_name: Schäfer, Mirko
last_name: Schäfer
- first_name: Johannes
full_name: Wagner, Johannes
last_name: Wagner
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
citation:
ama: Schäfer M, Wagner J, Schlüter A, Hesselbach J. Energy Flows in Industrial Buildings
and Machines using the Example of a Node Model. SNE Simulation Notes Europe.
2012;22(1):1-6. doi:10.11128/sne.22.tn.10103
apa: Schäfer, M., Wagner, J., Schlüter, A., & Hesselbach, J. (2012). Energy
Flows in Industrial Buildings and Machines using the Example of a Node Model.
SNE Simulation Notes Europe, 22(1), 1–6. https://doi.org/10.11128/sne.22.tn.10103
bibtex: '@article{Schäfer_Wagner_Schlüter_Hesselbach_2012, title={Energy Flows in
Industrial Buildings and Machines using the Example of a Node Model}, volume={22},
DOI={10.11128/sne.22.tn.10103},
number={1}, journal={SNE Simulation Notes Europe}, publisher={ARGESIM Arbeitsgemeinschaft
Simulation News}, author={Schäfer, Mirko and Wagner, Johannes and Schlüter, Alexander
and Hesselbach, Jens}, year={2012}, pages={1–6} }'
chicago: 'Schäfer, Mirko, Johannes Wagner, Alexander Schlüter, and Jens Hesselbach.
“Energy Flows in Industrial Buildings and Machines Using the Example of a Node
Model.” SNE Simulation Notes Europe 22, no. 1 (2012): 1–6. https://doi.org/10.11128/sne.22.tn.10103.'
ieee: 'M. Schäfer, J. Wagner, A. Schlüter, and J. Hesselbach, “Energy Flows in Industrial
Buildings and Machines using the Example of a Node Model,” SNE Simulation Notes
Europe, vol. 22, no. 1, pp. 1–6, 2012, doi: 10.11128/sne.22.tn.10103.'
mla: Schäfer, Mirko, et al. “Energy Flows in Industrial Buildings and Machines Using
the Example of a Node Model.” SNE Simulation Notes Europe, vol. 22, no.
1, ARGESIM Arbeitsgemeinschaft Simulation News, 2012, pp. 1–6, doi:10.11128/sne.22.tn.10103.
short: M. Schäfer, J. Wagner, A. Schlüter, J. Hesselbach, SNE Simulation Notes Europe
22 (2012) 1–6.
date_created: 2024-03-01T09:32:49Z
date_updated: 2025-04-01T08:28:03Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
doi: 10.11128/sne.22.tn.10103
extern: '1'
intvolume: ' 22'
issue: '1'
language:
- iso: eng
page: 1-6
publication: SNE Simulation Notes Europe
publication_identifier:
issn:
- 2305-9974
- 2306-0271
publication_status: published
publisher: ARGESIM Arbeitsgemeinschaft Simulation News
quality_controlled: '1'
status: public
title: Energy Flows in Industrial Buildings and Machines using the Example of a Node
Model
type: journal_article
user_id: '22833'
volume: 22
year: '2012'
...
---
_id: '52228'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Michele
full_name: Rosano, Michele
last_name: Rosano
- first_name: Stefan
full_name: Böhm, Stefan
last_name: Böhm
- first_name: Necat
full_name: Calisir, Necat
last_name: Calisir
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
citation:
ama: 'Schlüter A, Rosano M, Böhm S, Calisir N, Hesselbach J. Effects of Implementing
Efficiency Techniques in the Plastics Industry in Germany and Western Australia
– A Comparative Modelling Assessment. In: ; 2012.'
apa: 'Schlüter, A., Rosano, M., Böhm, S., Calisir, N., & Hesselbach, J. (2012).
Effects of Implementing Efficiency Techniques in the Plastics Industry in Germany
and Western Australia – A Comparative Modelling Assessment. Proceedings: 10th
Global Conference on Sustainable Manufacturing, Istanbul, Turkey.'
bibtex: '@inproceedings{Schlüter_Rosano_Böhm_Calisir_Hesselbach_2012, title={Effects
of Implementing Efficiency Techniques in the Plastics Industry in Germany and
Western Australia – A Comparative Modelling Assessment}, author={Schlüter, Alexander
and Rosano, Michele and Böhm, Stefan and Calisir, Necat and Hesselbach, Jens},
year={2012} }'
chicago: Schlüter, Alexander, Michele Rosano, Stefan Böhm, Necat Calisir, and Jens
Hesselbach. “Effects of Implementing Efficiency Techniques in the Plastics Industry
in Germany and Western Australia – A Comparative Modelling Assessment,” 2012.
ieee: 'A. Schlüter, M. Rosano, S. Böhm, N. Calisir, and J. Hesselbach, “Effects
of Implementing Efficiency Techniques in the Plastics Industry in Germany and
Western Australia – A Comparative Modelling Assessment,” presented at the Proceedings:
10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, 2012.'
mla: Schlüter, Alexander, et al. Effects of Implementing Efficiency Techniques
in the Plastics Industry in Germany and Western Australia – A Comparative Modelling
Assessment. 2012.
short: 'A. Schlüter, M. Rosano, S. Böhm, N. Calisir, J. Hesselbach, in: 2012.'
conference:
end_date: '02112012'
location: Istanbul, Turkey
name: 'Proceedings: 10th Global Conference on Sustainable Manufacturing'
start_date: '31102012'
date_created: 2024-03-01T09:45:45Z
date_updated: 2025-04-01T08:27:49Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: eng
publication_identifier:
issn:
- 978-605-63463-1-6
publication_status: published
status: public
title: Effects of Implementing Efficiency Techniques in the Plastics Industry in Germany
and Western Australia – A Comparative Modelling Assessment
type: conference
user_id: '22833'
year: '2012'
...
---
_id: '52420'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Lars
full_name: Martin, Lars
last_name: Martin
- first_name: Mirko
full_name: Schäfer, Mirko
last_name: Schäfer
citation:
ama: 'Schlüter A, Martin L, Schäfer M. Energieströme simulieren: Vom Prozess bis
zur Fabrik. In: Hesselbach J, ed. Energie- und klimaeffiziente Produktion:
Grundlagen, Leitlinien und Praxisbeispiele. Springer Vieweg; 2012.'
apa: 'Schlüter, A., Martin, L., & Schäfer, M. (2012). Energieströme simulieren:
Vom Prozess bis zur Fabrik. In J. Hesselbach (Ed.), Energie- und klimaeffiziente
Produktion: Grundlagen, Leitlinien und Praxisbeispiele. Springer Vieweg.'
bibtex: '@inbook{Schlüter_Martin_Schäfer_2012, place={Wiesbaden}, title={Energieströme
simulieren: Vom Prozess bis zur Fabrik}, booktitle={Energie- und klimaeffiziente
Produktion: Grundlagen, Leitlinien und Praxisbeispiele}, publisher={Springer Vieweg},
author={Schlüter, Alexander and Martin, Lars and Schäfer, Mirko}, editor={Hesselbach,
Jens}, year={2012} }'
chicago: 'Schlüter, Alexander, Lars Martin, and Mirko Schäfer. “Energieströme simulieren:
Vom Prozess bis zur Fabrik.” In Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele, edited by Jens Hesselbach. Wiesbaden: Springer
Vieweg, 2012.'
ieee: 'A. Schlüter, L. Martin, and M. Schäfer, “Energieströme simulieren: Vom Prozess
bis zur Fabrik,” in Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien
und Praxisbeispiele, J. Hesselbach, Ed. Wiesbaden: Springer Vieweg, 2012.'
mla: 'Schlüter, Alexander, et al. “Energieströme simulieren: Vom Prozess bis zur
Fabrik.” Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und
Praxisbeispiele, edited by Jens Hesselbach, Springer Vieweg, 2012.'
short: 'A. Schlüter, L. Martin, M. Schäfer, in: J. Hesselbach (Ed.), Energie- und
klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele, Springer
Vieweg, Wiesbaden, 2012.'
date_created: 2024-03-09T10:59:53Z
date_updated: 2025-04-01T08:24:27Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
editor:
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
extern: '1'
language:
- iso: ger
place: Wiesbaden
publication: 'Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und
Praxisbeispiele'
publication_identifier:
isbn:
- "\t 978-3-8348-0448-8"
publication_status: published
publisher: Springer Vieweg
status: public
title: 'Energieströme simulieren: Vom Prozess bis zur Fabrik'
type: book_chapter
user_id: '22833'
year: '2012'
...
---
_id: '52419'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Mirko
full_name: Schäfer, Mirko
last_name: Schäfer
citation:
ama: 'Schlüter A, Schäfer M. Von der Modellbildung zur Simulation: Die Vorgehensweise.
In: Hesselbach J, ed. Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele. Springer Vieweg; 2012:101-102.'
apa: 'Schlüter, A., & Schäfer, M. (2012). Von der Modellbildung zur Simulation:
Die Vorgehensweise. In J. Hesselbach (Ed.), Energie- und klimaeffiziente Produktion:
Grundlagen, Leitlinien und Praxisbeispiele (pp. 101–102). Springer Vieweg.'
bibtex: '@inbook{Schlüter_Schäfer_2012, place={Wiesbaden}, title={Von der Modellbildung
zur Simulation: Die Vorgehensweise}, booktitle={Energie- und klimaeffiziente Produktion:
Grundlagen, Leitlinien und Praxisbeispiele}, publisher={Springer Vieweg}, author={Schlüter,
Alexander and Schäfer, Mirko}, editor={Hesselbach, Jens}, year={2012}, pages={101–102}
}'
chicago: 'Schlüter, Alexander, and Mirko Schäfer. “Von der Modellbildung zur Simulation:
Die Vorgehensweise.” In Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele, edited by Jens Hesselbach, 101–2. Wiesbaden:
Springer Vieweg, 2012.'
ieee: 'A. Schlüter and M. Schäfer, “Von der Modellbildung zur Simulation: Die Vorgehensweise,”
in Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele,
J. Hesselbach, Ed. Wiesbaden: Springer Vieweg, 2012, pp. 101–102.'
mla: 'Schlüter, Alexander, and Mirko Schäfer. “Von der Modellbildung zur Simulation:
Die Vorgehensweise.” Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien
und Praxisbeispiele, edited by Jens Hesselbach, Springer Vieweg, 2012, pp.
101–02.'
short: 'A. Schlüter, M. Schäfer, in: J. Hesselbach (Ed.), Energie- und klimaeffiziente
Produktion: Grundlagen, Leitlinien und Praxisbeispiele, Springer Vieweg, Wiesbaden,
2012, pp. 101–102.'
date_created: 2024-03-09T10:48:23Z
date_updated: 2025-04-01T08:23:46Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
editor:
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
extern: '1'
language:
- iso: ger
page: 101-102
place: Wiesbaden
publication: 'Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und
Praxisbeispiele'
publication_identifier:
isbn:
- 978-3-8348-0448-8
publication_status: published
publisher: Springer Vieweg
status: public
title: 'Von der Modellbildung zur Simulation: Die Vorgehensweise'
type: book_chapter
user_id: '22833'
year: '2012'
...
---
_id: '52421'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Frank
full_name: Leischner, Frank
last_name: Leischner
- first_name: Benjamin
full_name: Rommel, Benjamin
last_name: Rommel
citation:
ama: 'Schlüter A, Leischner F, Rommel B. Prozesswärme und Abwärmenutzung. In: Hesselbach
J, ed. Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und
Praxisbeispiele. Springer Vieweg; 2012:229-256.'
apa: 'Schlüter, A., Leischner, F., & Rommel, B. (2012). Prozesswärme und Abwärmenutzung.
In J. Hesselbach (Ed.), Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele (pp. 229–256). Springer Vieweg.'
bibtex: '@inbook{Schlüter_Leischner_Rommel_2012, place={Wiesbaden}, title={Prozesswärme
und Abwärmenutzung}, booktitle={Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele}, publisher={Springer Vieweg}, author={Schlüter,
Alexander and Leischner, Frank and Rommel, Benjamin}, editor={Hesselbach, Jens},
year={2012}, pages={229–256} }'
chicago: 'Schlüter, Alexander, Frank Leischner, and Benjamin Rommel. “Prozesswärme
und Abwärmenutzung.” In Energie- und klimaeffiziente Produktion: Grundlagen,
Leitlinien und Praxisbeispiele, edited by Jens Hesselbach, 229–56. Wiesbaden:
Springer Vieweg, 2012.'
ieee: 'A. Schlüter, F. Leischner, and B. Rommel, “Prozesswärme und Abwärmenutzung,”
in Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele,
J. Hesselbach, Ed. Wiesbaden: Springer Vieweg, 2012, pp. 229–256.'
mla: 'Schlüter, Alexander, et al. “Prozesswärme und Abwärmenutzung.” Energie-
und klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele,
edited by Jens Hesselbach, Springer Vieweg, 2012, pp. 229–56.'
short: 'A. Schlüter, F. Leischner, B. Rommel, in: J. Hesselbach (Ed.), Energie-
und klimaeffiziente Produktion: Grundlagen, Leitlinien und Praxisbeispiele, Springer
Vieweg, Wiesbaden, 2012, pp. 229–256.'
date_created: 2024-03-09T11:01:52Z
date_updated: 2025-04-01T08:24:52Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
editor:
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
extern: '1'
language:
- iso: ger
page: 229-256
place: Wiesbaden
publication: 'Energie- und klimaeffiziente Produktion: Grundlagen, Leitlinien und
Praxisbeispiele'
publication_identifier:
unknown:
- 978-3-8348-0448-8
publication_status: published
publisher: Springer Vieweg
status: public
title: Prozesswärme und Abwärmenutzung
type: book_chapter
user_id: '22833'
year: '2012'
...
---
_id: '52446'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Michele
full_name: Rosano, Michele
last_name: Rosano
- first_name: Stefan
full_name: Böhm, Stefan
last_name: Böhm
- first_name: Necat
full_name: Calisir, Necat
last_name: Calisir
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
citation:
ama: Schlüter A, Rosano M, Böhm S, Calisir N, Hesselbach J. Effects of Implementing
Efficiency Techniques in the Plastics Industry in Germany and Western Australia
– A Comparative Modelling Assessment, Talk. 10th Conference on Sustainable
Manufacturing; 2012.
apa: Schlüter, A., Rosano, M., Böhm, S., Calisir, N., & Hesselbach, J. (2012).
Effects of Implementing Efficiency Techniques in the Plastics Industry in Germany
and Western Australia – A Comparative Modelling Assessment, talk. 10th Conference
on Sustainable Manufacturing.
bibtex: '@book{Schlüter_Rosano_Böhm_Calisir_Hesselbach_2012, place={Istanbul}, title={Effects
of Implementing Efficiency Techniques in the Plastics Industry in Germany and
Western Australia – A Comparative Modelling Assessment, talk}, publisher={10th
Conference on Sustainable Manufacturing}, author={Schlüter, Alexander and Rosano,
Michele and Böhm, Stefan and Calisir, Necat and Hesselbach, Jens}, year={2012}
}'
chicago: 'Schlüter, Alexander, Michele Rosano, Stefan Böhm, Necat Calisir, and Jens
Hesselbach. Effects of Implementing Efficiency Techniques in the Plastics Industry
in Germany and Western Australia – A Comparative Modelling Assessment, Talk.
Istanbul: 10th Conference on Sustainable Manufacturing, 2012.'
ieee: 'A. Schlüter, M. Rosano, S. Böhm, N. Calisir, and J. Hesselbach, Effects
of Implementing Efficiency Techniques in the Plastics Industry in Germany and
Western Australia – A Comparative Modelling Assessment, talk. Istanbul: 10th
Conference on Sustainable Manufacturing, 2012.'
mla: Schlüter, Alexander, et al. Effects of Implementing Efficiency Techniques
in the Plastics Industry in Germany and Western Australia – A Comparative Modelling
Assessment, Talk. 10th Conference on Sustainable Manufacturing, 2012.
short: A. Schlüter, M. Rosano, S. Böhm, N. Calisir, J. Hesselbach, Effects of Implementing
Efficiency Techniques in the Plastics Industry in Germany and Western Australia
– A Comparative Modelling Assessment, Talk, 10th Conference on Sustainable Manufacturing,
Istanbul, 2012.
date_created: 2024-03-10T08:44:13Z
date_updated: 2025-04-01T08:31:30Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: eng
place: Istanbul
publisher: 10th Conference on Sustainable Manufacturing
status: public
title: Effects of Implementing Efficiency Techniques in the Plastics Industry in Germany
and Western Australia – A Comparative Modelling Assessment, talk
type: misc
user_id: '22833'
year: '2012'
...
---
_id: '52445'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: Schlüter A. Wenn aus Wärme Kälte wird. Interview. Klimaretter.info;
2012.
apa: Schlüter, A. (2012). Wenn aus Wärme Kälte wird. Interview. Klimaretter.info.
bibtex: '@book{Schlüter_2012, place={Berlin}, title={Wenn aus Wärme Kälte wird.
Interview}, publisher={Klimaretter.info}, author={Schlüter, Alexander}, year={2012}
}'
chicago: 'Schlüter, Alexander. Wenn aus Wärme Kälte wird. Interview. Berlin:
Klimaretter.info, 2012.'
ieee: 'A. Schlüter, Wenn aus Wärme Kälte wird. Interview. Berlin: Klimaretter.info,
2012.'
mla: Schlüter, Alexander. Wenn aus Wärme Kälte wird. Interview. Klimaretter.info,
2012.
short: A. Schlüter, Wenn aus Wärme Kälte wird. Interview, Klimaretter.info, Berlin,
2012.
date_created: 2024-03-10T08:39:49Z
date_updated: 2025-04-01T08:31:04Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: ger
place: Berlin
publication_status: published
publisher: Klimaretter.info
status: public
title: Wenn aus Wärme Kälte wird. Interview
type: misc
user_id: '22833'
year: '2012'
...
---
_id: '62788'
abstract:
- lang: eng
text: AbstractWe present a novel approach for the
simulation of solid to solid phase‐transformations in polycrystalline materials.
To facilitate the utilization of a non‐affine micro‐sphere formulation with volumetric‐deviatoric
split, we introduce Helmholtz free energy functions depending on volumetric and
deviatoric strain measures for the underlying scalar‐valued phase‐transformation
model. As an extension of affine micro‐sphere models [5], the non‐affine micro‐sphere
formulation with volumetric‐deviatoric split allows to capture different Young's
moduli and Poisson's ratios on the macro‐scale [1]. As a consequence, the temperature‐dependent
free energy assigned to each individual phase takes the form of an elliptic paraboloid
in volumetric‐deviatoric strain space, where the energy landscape of the overall
material is obtained from the contributions of the individual constituents. For
the evolution of volume fractions, we use an approach based on statistical physics–taking
into account actual Gibbs energy barriers and transformation probabilities [2].
The computation of individual energy barriers between the phases considered is
enabled by numerical minimization of parametric intersection curves of elliptic
Gibbs energy paraboloids. (© 2012 Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim)
author:
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Thorsten
full_name: Bartel, Thorsten
last_name: Bartel
- first_name: Andreas
full_name: Menzel, Andreas
last_name: Menzel
citation:
ama: Ostwald R, Bartel T, Menzel A. Simulation of phase‐transformations based on
numerical minimization of intersecting Gibbs energy potentials. PAMM. 2012;12(1):277-278.
doi:10.1002/pamm.201210129
apa: Ostwald, R., Bartel, T., & Menzel, A. (2012). Simulation of phase‐transformations
based on numerical minimization of intersecting Gibbs energy potentials. PAMM,
12(1), 277–278. https://doi.org/10.1002/pamm.201210129
bibtex: '@article{Ostwald_Bartel_Menzel_2012, title={Simulation of phase‐transformations
based on numerical minimization of intersecting Gibbs energy potentials}, volume={12},
DOI={10.1002/pamm.201210129},
number={1}, journal={PAMM}, publisher={Wiley}, author={Ostwald, Richard and Bartel,
Thorsten and Menzel, Andreas}, year={2012}, pages={277–278} }'
chicago: 'Ostwald, Richard, Thorsten Bartel, and Andreas Menzel. “Simulation of
Phase‐transformations Based on Numerical Minimization of Intersecting Gibbs Energy
Potentials.” PAMM 12, no. 1 (2012): 277–78. https://doi.org/10.1002/pamm.201210129.'
ieee: 'R. Ostwald, T. Bartel, and A. Menzel, “Simulation of phase‐transformations
based on numerical minimization of intersecting Gibbs energy potentials,” PAMM,
vol. 12, no. 1, pp. 277–278, 2012, doi: 10.1002/pamm.201210129.'
mla: Ostwald, Richard, et al. “Simulation of Phase‐transformations Based on Numerical
Minimization of Intersecting Gibbs Energy Potentials.” PAMM, vol. 12, no.
1, Wiley, 2012, pp. 277–78, doi:10.1002/pamm.201210129.
short: R. Ostwald, T. Bartel, A. Menzel, PAMM 12 (2012) 277–278.
date_created: 2025-12-03T13:17:53Z
date_updated: 2025-12-03T13:18:42Z
department:
- _id: '952'
- _id: '321'
doi: 10.1002/pamm.201210129
intvolume: ' 12'
issue: '1'
language:
- iso: eng
page: 277-278
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Simulation of phase‐transformations based on numerical minimization of intersecting
Gibbs energy potentials
type: journal_article
user_id: '85414'
volume: 12
year: '2012'
...
---
_id: '62787'
author:
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Thorsten
full_name: Bartel, Thorsten
last_name: Bartel
- first_name: Andreas
full_name: Menzel, Andreas
last_name: Menzel
citation:
ama: Ostwald R, Bartel T, Menzel A. Phase-transformations interacting with plasticity
– A micro-sphere model applied to TRIP steel. Computational Materials Science.
2012;64:12-16. doi:10.1016/j.commatsci.2012.05.015
apa: Ostwald, R., Bartel, T., & Menzel, A. (2012). Phase-transformations interacting
with plasticity – A micro-sphere model applied to TRIP steel. Computational
Materials Science, 64, 12–16. https://doi.org/10.1016/j.commatsci.2012.05.015
bibtex: '@article{Ostwald_Bartel_Menzel_2012, title={Phase-transformations interacting
with plasticity – A micro-sphere model applied to TRIP steel}, volume={64}, DOI={10.1016/j.commatsci.2012.05.015},
journal={Computational Materials Science}, publisher={Elsevier BV}, author={Ostwald,
Richard and Bartel, Thorsten and Menzel, Andreas}, year={2012}, pages={12–16}
}'
chicago: 'Ostwald, Richard, Thorsten Bartel, and Andreas Menzel. “Phase-Transformations
Interacting with Plasticity – A Micro-Sphere Model Applied to TRIP Steel.” Computational
Materials Science 64 (2012): 12–16. https://doi.org/10.1016/j.commatsci.2012.05.015.'
ieee: 'R. Ostwald, T. Bartel, and A. Menzel, “Phase-transformations interacting
with plasticity – A micro-sphere model applied to TRIP steel,” Computational
Materials Science, vol. 64, pp. 12–16, 2012, doi: 10.1016/j.commatsci.2012.05.015.'
mla: Ostwald, Richard, et al. “Phase-Transformations Interacting with Plasticity
– A Micro-Sphere Model Applied to TRIP Steel.” Computational Materials Science,
vol. 64, Elsevier BV, 2012, pp. 12–16, doi:10.1016/j.commatsci.2012.05.015.
short: R. Ostwald, T. Bartel, A. Menzel, Computational Materials Science 64 (2012)
12–16.
date_created: 2025-12-03T13:16:44Z
date_updated: 2025-12-03T13:17:26Z
department:
- _id: '952'
- _id: '321'
doi: 10.1016/j.commatsci.2012.05.015
intvolume: ' 64'
language:
- iso: eng
page: 12-16
publication: Computational Materials Science
publication_identifier:
issn:
- 0927-0256
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Phase-transformations interacting with plasticity – A micro-sphere model applied
to TRIP steel
type: journal_article
user_id: '85414'
volume: 64
year: '2012'
...
---
_id: '20947'
abstract:
- lang: eng
text: Alkylphosphonic acids of different alkyl chain lengths were adsorbed on electrochemically
polished NiTi surfaces from ethanolic solutions. The electropolishing process
led to passive films mainly composed of Ti-oxyhydroxide. The surface showed nanoscopic
etching pits with a depths of about 2 nm and a diameter of about 20 nm. The interfacial
binding mechanism of the phosphonic acid group to the oxyhydroxide surface and
the ordering of the monolayer were spectroscopically analysed by means of infrared
reflection absorption FTIR-spectroscopy with (PM-IRRAS) and without (IRRAS) photoelastic
modulation. The comparison of IRRAS and PM-IRRAS data of the long chain octadecylphosphonic
acid monolayer proved that the binding mechanism of the phosphonic acid group
to the oxyhydroxide surface is based on a mono-or bidentate bond, which is not
stable in the presence of high water activities. An alkyl chain length of 17 CH2
groups is required for the formation of self-assembled monolayers, which are stable
in aqueous environments. These long chain aliphatic organophosphonic acid monolayers
were shown to inhibit anodic and cathodic surface reactions. (C) 2010 Elsevier
B.V. All rights reserved.
author:
- first_name: M.
full_name: Maxisch, M.
last_name: Maxisch
- first_name: Christoph
full_name: Ebbert, Christoph
id: '7266'
last_name: Ebbert
- first_name: B.
full_name: Torun, B.
last_name: Torun
- first_name: N.
full_name: Fink, N.
last_name: Fink
- first_name: T.
full_name: de los Arcos, T.
last_name: de los Arcos
- first_name: J.
full_name: Lackmann, J.
last_name: Lackmann
- first_name: H. J.
full_name: Maier, H. J.
last_name: Maier
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Maxisch M, Ebbert C, Torun B, et al. PM-IRRAS studies of the adsorption and
stability of organophosphonate monolayers on passivated NiTi surfaces. APPLIED
SURFACE SCIENCE. 2011;257(6):2011-2018. doi:10.1016/j.apsusc.2010.09.044
apa: Maxisch, M., Ebbert, C., Torun, B., Fink, N., de los Arcos, T., Lackmann, J.,
… Grundmeier, G. (2011). PM-IRRAS studies of the adsorption and stability of organophosphonate
monolayers on passivated NiTi surfaces. APPLIED SURFACE SCIENCE, 257(6),
2011–2018. https://doi.org/10.1016/j.apsusc.2010.09.044
bibtex: '@article{Maxisch_Ebbert_Torun_Fink_de los Arcos_Lackmann_Maier_Grundmeier_2011,
title={PM-IRRAS studies of the adsorption and stability of organophosphonate monolayers
on passivated NiTi surfaces}, volume={257}, DOI={10.1016/j.apsusc.2010.09.044},
number={6}, journal={APPLIED SURFACE SCIENCE}, author={Maxisch, M. and Ebbert,
Christoph and Torun, B. and Fink, N. and de los Arcos, T. and Lackmann, J. and
Maier, H. J. and Grundmeier, Guido}, year={2011}, pages={2011–2018} }'
chicago: 'Maxisch, M., Christoph Ebbert, B. Torun, N. Fink, T. de los Arcos, J.
Lackmann, H. J. Maier, and Guido Grundmeier. “PM-IRRAS Studies of the Adsorption
and Stability of Organophosphonate Monolayers on Passivated NiTi Surfaces.” APPLIED
SURFACE SCIENCE 257, no. 6 (2011): 2011–18. https://doi.org/10.1016/j.apsusc.2010.09.044.'
ieee: M. Maxisch et al., “PM-IRRAS studies of the adsorption and stability
of organophosphonate monolayers on passivated NiTi surfaces,” APPLIED SURFACE
SCIENCE, vol. 257, no. 6, pp. 2011–2018, 2011.
mla: Maxisch, M., et al. “PM-IRRAS Studies of the Adsorption and Stability of Organophosphonate
Monolayers on Passivated NiTi Surfaces.” APPLIED SURFACE SCIENCE, vol.
257, no. 6, 2011, pp. 2011–18, doi:10.1016/j.apsusc.2010.09.044.
short: M. Maxisch, C. Ebbert, B. Torun, N. Fink, T. de los Arcos, J. Lackmann, H.J.
Maier, G. Grundmeier, APPLIED SURFACE SCIENCE 257 (2011) 2011–2018.
date_created: 2021-01-13T10:12:53Z
date_updated: 2022-01-06T06:54:41Z
department:
- _id: '35'
- _id: '302'
- _id: '321'
doi: 10.1016/j.apsusc.2010.09.044
external_id:
isi:
- '000285408700035'
intvolume: ' 257'
isi: '1'
issue: '6'
language:
- iso: eng
page: 2011-2018
publication: APPLIED SURFACE SCIENCE
publication_identifier:
eissn:
- 1873-5584
issn:
- 0169-4332
publication_status: published
quality_controlled: '1'
status: public
title: PM-IRRAS studies of the adsorption and stability of organophosphonate monolayers
on passivated NiTi surfaces
type: journal_article
user_id: '7266'
volume: 257
year: '2011'
...
---
_id: '15969'
author:
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: M.
full_name: Sarrazin, M.
last_name: Sarrazin
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Lauter C, Sarrazin M, Tröster T. Multimaterialsysteme höchstfest verbunden.
Adhäsion – Kleben und Dichten. 2011;3/2011:39-43.
apa: Lauter, C., Sarrazin, M., & Tröster, T. (2011). Multimaterialsysteme höchstfest
verbunden. Adhäsion – Kleben und Dichten, 3/2011, 39–43.
bibtex: '@article{Lauter_Sarrazin_Tröster_2011, title={Multimaterialsysteme höchstfest
verbunden}, volume={3/2011}, journal={Adhäsion – Kleben und Dichten}, publisher={Springer
Vieweg}, author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2011},
pages={39–43} }'
chicago: 'Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Multimaterialsysteme
höchstfest verbunden.” Adhäsion – Kleben und Dichten 3/2011 (2011): 39–43.'
ieee: C. Lauter, M. Sarrazin, and T. Tröster, “Multimaterialsysteme höchstfest verbunden,”
Adhäsion – Kleben und Dichten, vol. 3/2011, pp. 39–43, 2011.
mla: Lauter, Christian, et al. “Multimaterialsysteme höchstfest verbunden.” Adhäsion
– Kleben und Dichten, vol. 3/2011, Springer Vieweg, 2011, pp. 39–43.
short: C. Lauter, M. Sarrazin, T. Tröster, Adhäsion – Kleben und Dichten 3/2011
(2011) 39–43.
date_created: 2020-02-21T15:07:12Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 39-43
publication: Adhäsion – Kleben und Dichten
publisher: Springer Vieweg
status: public
title: Multimaterialsysteme höchstfest verbunden
type: journal_article
user_id: '72008'
volume: 3/2011
year: '2011'
...
---
_id: '15971'
author:
- first_name: Meike
full_name: Frantz, Meike
last_name: Frantz
- first_name: O.
full_name: Stübbe, O.
last_name: Stübbe
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: J.
full_name: Schrange, J.
last_name: Schrange
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Frantz M, Stübbe O, Lauter C, Schrange J, Tröster T. Mechatronisches System
zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel
einer Lauffeder. In: ; 2011.'
apa: Frantz, M., Stübbe, O., Lauter, C., Schrange, J., & Tröster, T. (2011).
Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
am Beispiel einer Lauffeder. Presented at the InnoMateria – Interdisziplinäre
Kongressmesse für innovative Werkstoffe, Köln.
bibtex: '@inproceedings{Frantz_Stübbe_Lauter_Schrange_Tröster_2011, title={Mechatronisches
System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
am Beispiel einer Lauffeder}, author={Frantz, Meike and Stübbe, O. and Lauter,
Christian and Schrange, J. and Tröster, Thomas}, year={2011} }'
chicago: Frantz, Meike, O. Stübbe, Christian Lauter, J. Schrange, and Thomas Tröster.
“Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
am Beispiel einer Lauffeder,” 2011.
ieee: M. Frantz, O. Stübbe, C. Lauter, J. Schrange, and T. Tröster, “Mechatronisches
System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
am Beispiel einer Lauffeder,” presented at the InnoMateria – Interdisziplinäre
Kongressmesse für innovative Werkstoffe, Köln, 2011.
mla: Frantz, Meike, et al. Mechatronisches System zur Bestimmung der Restlebensdauer
von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. 2011.
short: 'M. Frantz, O. Stübbe, C. Lauter, J. Schrange, T. Tröster, in: 2011.'
conference:
end_date: 2011-03-16
location: Köln
name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe
start_date: 2011-03-15
date_created: 2020-02-21T15:17:59Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
am Beispiel einer Lauffeder
type: conference
user_id: '72008'
year: '2011'
...
---
_id: '15972'
author:
- first_name: D.
full_name: Thomas, D.
last_name: Thomas
- first_name: H.
full_name: Block, H.
last_name: Block
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: J.
full_name: Krogmeier, J.
last_name: Krogmeier
citation:
ama: 'Thomas D, Block H, Tröster T, Krogmeier J. Herstellung von belastungsgerechten
Strukturbauteilen mittels partieller induktiver Härtung. In: ; 2011.'
apa: Thomas, D., Block, H., Tröster, T., & Krogmeier, J. (2011). Herstellung
von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung.
Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative
Werkstoffe, Köln.
bibtex: '@inproceedings{Thomas_Block_Tröster_Krogmeier_2011, title={Herstellung
von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung},
author={Thomas, D. and Block, H. and Tröster, Thomas and Krogmeier, J.}, year={2011}
}'
chicago: Thomas, D., H. Block, Thomas Tröster, and J. Krogmeier. “Herstellung von
belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,”
2011.
ieee: D. Thomas, H. Block, T. Tröster, and J. Krogmeier, “Herstellung von belastungsgerechten
Strukturbauteilen mittels partieller induktiver Härtung,” presented at the InnoMateria
– Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011.
mla: Thomas, D., et al. Herstellung von belastungsgerechten Strukturbauteilen
mittels partieller induktiver Härtung. 2011.
short: 'D. Thomas, H. Block, T. Tröster, J. Krogmeier, in: 2011.'
conference:
end_date: 2011-03-16
location: Köln
name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe
start_date: 2011-03-15
date_created: 2020-02-21T15:20:49Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver
Härtung
type: conference
user_id: '72008'
year: '2011'
...
---
_id: '15974'
author:
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Marten T, Lauter C, Tröster T. Automobilleichtbau durch höchstfeste Multimaterialsysteme.
Ingenieurspiegel. 2011;2/2011:67-69.
apa: Marten, T., Lauter, C., & Tröster, T. (2011). Automobilleichtbau durch
höchstfeste Multimaterialsysteme. Ingenieurspiegel, 2/2011, 67–69.
bibtex: '@article{Marten_Lauter_Tröster_2011, title={Automobilleichtbau durch höchstfeste
Multimaterialsysteme}, volume={2/2011}, journal={Ingenieurspiegel}, publisher={Public
Verlagsgesellschaft und Anzeigenagentur}, author={Marten, Thorsten and Lauter,
Christian and Tröster, Thomas}, year={2011}, pages={67–69} }'
chicago: 'Marten, Thorsten, Christian Lauter, and Thomas Tröster. “Automobilleichtbau
durch höchstfeste Multimaterialsysteme.” Ingenieurspiegel 2/2011 (2011):
67–69.'
ieee: T. Marten, C. Lauter, and T. Tröster, “Automobilleichtbau durch höchstfeste
Multimaterialsysteme,” Ingenieurspiegel, vol. 2/2011, pp. 67–69, 2011.
mla: Marten, Thorsten, et al. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.”
Ingenieurspiegel, vol. 2/2011, Public Verlagsgesellschaft und Anzeigenagentur,
2011, pp. 67–69.
short: T. Marten, C. Lauter, T. Tröster, Ingenieurspiegel 2/2011 (2011) 67–69.
date_created: 2020-02-21T15:24:34Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 67-69
publication: Ingenieurspiegel
publisher: Public Verlagsgesellschaft und Anzeigenagentur
status: public
title: Automobilleichtbau durch höchstfeste Multimaterialsysteme
type: journal_article
user_id: '72008'
volume: 2/2011
year: '2011'
...