---
_id: '26975'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: A.
  full_name: Hirsch, A.
  last_name: Hirsch
- first_name: M.
  full_name: Hüttner, M.
  last_name: Hüttner
- first_name: J.
  full_name: Wächter, J.
  last_name: Wächter
citation:
  ama: 'Moritzer E, Hirsch A, Hüttner M, Wächter J. The Influence of Environmental
    Aging on the Material Properties of Back-Molded Composite Sheets. In: <i>34th
    International Conference of the Polymer Processing Society (PPS)</i>. ; 2018.'
  apa: Moritzer, E., Hirsch, A., Hüttner, M., &#38; Wächter, J. (2018). The Influence
    of Environmental Aging on the Material Properties of Back-Molded Composite Sheets.
    <i>34th International Conference of the Polymer Processing Society (PPS)</i>.
    34th International Conference of the Polymer Processing Society (PPS), Taipei
    (Taiwan).
  bibtex: '@inproceedings{Moritzer_Hirsch_Hüttner_Wächter_2018, title={The Influence
    of Environmental Aging on the Material Properties of Back-Molded Composite Sheets},
    booktitle={34th International Conference of the Polymer Processing Society (PPS)},
    author={Moritzer, Elmar and Hirsch, A. and Hüttner, M. and Wächter, J.}, year={2018}
    }'
  chicago: Moritzer, Elmar, A. Hirsch, M. Hüttner, and J. Wächter. “The Influence
    of Environmental Aging on the Material Properties of Back-Molded Composite Sheets.”
    In <i>34th International Conference of the Polymer Processing Society (PPS)</i>,
    2018.
  ieee: E. Moritzer, A. Hirsch, M. Hüttner, and J. Wächter, “The Influence of Environmental
    Aging on the Material Properties of Back-Molded Composite Sheets,” presented at
    the 34th International Conference of the Polymer Processing Society (PPS), Taipei
    (Taiwan), 2018.
  mla: Moritzer, Elmar, et al. “The Influence of Environmental Aging on the Material
    Properties of Back-Molded Composite Sheets.” <i>34th International Conference
    of the Polymer Processing Society (PPS)</i>, 2018.
  short: 'E. Moritzer, A. Hirsch, M. Hüttner, J. Wächter, in: 34th International Conference
    of the Polymer Processing Society (PPS), 2018.'
conference:
  location: Taipei (Taiwan)
  name: 34th International Conference of the Polymer Processing Society (PPS)
date_created: 2021-10-27T10:56:34Z
date_updated: 2022-01-06T06:57:31Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: 34th International Conference of the Polymer Processing Society (PPS)
status: public
title: The Influence of Environmental Aging on the Material Properties of Back-Molded
  Composite Sheets
type: conference
user_id: '44116'
year: '2018'
...
---
_id: '26977'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: M.
  full_name: Hüttner, M.
  last_name: Hüttner
citation:
  ama: 'Moritzer E, Hüttner M. The Influence of Hygrothermal Aging on the Material
    Properties of Continuous Fiber-Reinforced Thermoplastics. In: <i>76th Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC)</i>. ; 2018.'
  apa: Moritzer, E., &#38; Hüttner, M. (2018). The Influence of Hygrothermal Aging
    on the Material Properties of Continuous Fiber-Reinforced Thermoplastics. <i>76th
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>.
    76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC),
    Orlando (USA).
  bibtex: '@inproceedings{Moritzer_Hüttner_2018, title={The Influence of Hygrothermal
    Aging on the Material Properties of Continuous Fiber-Reinforced Thermoplastics},
    booktitle={76th Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC)}, author={Moritzer, Elmar and Hüttner, M.}, year={2018} }'
  chicago: Moritzer, Elmar, and M. Hüttner. “The Influence of Hygrothermal Aging on
    the Material Properties of Continuous Fiber-Reinforced Thermoplastics.” In <i>76th
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>,
    2018.
  ieee: E. Moritzer and M. Hüttner, “The Influence of Hygrothermal Aging on the Material
    Properties of Continuous Fiber-Reinforced Thermoplastics,” presented at the 76th
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando
    (USA), 2018.
  mla: Moritzer, Elmar, and M. Hüttner. “The Influence of Hygrothermal Aging on the
    Material Properties of Continuous Fiber-Reinforced Thermoplastics.” <i>76th Annual
    Technical Conference of the Society of Plastics Engineers (ANTEC)</i>, 2018.
  short: 'E. Moritzer, M. Hüttner, in: 76th Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC), 2018.'
conference:
  location: Orlando (USA)
  name: 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-10-27T10:57:46Z
date_updated: 2022-01-06T06:57:31Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: 76th Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: The Influence of Hygrothermal Aging on the Material Properties of Continuous
  Fiber-Reinforced Thermoplastics
type: conference
user_id: '44116'
year: '2018'
...
---
_id: '26979'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: B.
  full_name: Landgräber, B.
  last_name: Landgräber
citation:
  ama: 'Moritzer E, Landgräber B. Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen.
    In: <i>Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen</i>.
    1st ed. ; 2018:127-140.'
  apa: Moritzer, E., &#38; Landgräber, B. (2018). Die Bedeutung von Kunststoffen für
    hybride Leichtbaustrukturen. In <i>Wissenschaft im Angesicht großer gesellschaftlicher
    Herausforderungen</i> (1st ed., pp. 127–140).
  bibtex: '@inbook{Moritzer_Landgräber_2018, place={Bielefeld}, edition={1}, title={Die
    Bedeutung von Kunststoffen für hybride Leichtbaustrukturen}, booktitle={Wissenschaft
    im Angesicht großer gesellschaftlicher Herausforderungen}, author={Moritzer, Elmar
    and Landgräber, B.}, year={2018}, pages={127–140} }'
  chicago: Moritzer, Elmar, and B. Landgräber. “Die Bedeutung von Kunststoffen für
    hybride Leichtbaustrukturen.” In <i>Wissenschaft im Angesicht großer gesellschaftlicher
    Herausforderungen</i>, 1st ed., 127–40. Bielefeld, 2018.
  ieee: E. Moritzer and B. Landgräber, “Die Bedeutung von Kunststoffen für hybride
    Leichtbaustrukturen,” in <i>Wissenschaft im Angesicht großer gesellschaftlicher
    Herausforderungen</i>, 1st ed., Bielefeld, 2018, pp. 127–140.
  mla: Moritzer, Elmar, and B. Landgräber. “Die Bedeutung von Kunststoffen für hybride
    Leichtbaustrukturen.” <i>Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen</i>,
    1st ed., 2018, pp. 127–40.
  short: 'E. Moritzer, B. Landgräber, in: Wissenschaft im Angesicht großer gesellschaftlicher
    Herausforderungen, 1st ed., Bielefeld, 2018, pp. 127–140.'
date_created: 2021-10-27T11:00:23Z
date_updated: 2022-01-06T06:57:31Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
edition: '1'
language:
- iso: ger
page: 127-140
place: Bielefeld
publication: Wissenschaft im Angesicht großer gesellschaftlicher Herausforderungen
publication_identifier:
  isbn:
  - 978-3-8376-4099-1
status: public
title: Die Bedeutung von Kunststoffen für hybride Leichtbaustrukturen
type: book_chapter
user_id: '44116'
year: '2018'
...
---
_id: '27658'
author:
- first_name: Patrick R.
  full_name: Brandler , Patrick R.
  last_name: 'Brandler '
citation:
  ama: Brandler  PR. <i>Failure Behavior of Short Glass Fiber Reinforced Polyamide
    under Superimposed Mechanical-Enviromental Fatigue</i>.; 2018.
  apa: Brandler , P. R. (2018). <i>Failure behavior of short glass fiber reinforced
    polyamide under superimposed mechanical-enviromental fatigue</i>.
  bibtex: '@book{Brandler _2018, title={Failure behavior of short glass fiber reinforced
    polyamide under superimposed mechanical-enviromental fatigue}, author={Brandler
    , Patrick R.}, year={2018} }'
  chicago: Brandler , Patrick R. <i>Failure Behavior of Short Glass Fiber Reinforced
    Polyamide under Superimposed Mechanical-Enviromental Fatigue</i>, 2018.
  ieee: P. R. Brandler , <i>Failure behavior of short glass fiber reinforced polyamide
    under superimposed mechanical-enviromental fatigue</i>. 2018.
  mla: Brandler , Patrick R. <i>Failure Behavior of Short Glass Fiber Reinforced Polyamide
    under Superimposed Mechanical-Enviromental Fatigue</i>. 2018.
  short: P.R. Brandler , Failure Behavior of Short Glass Fiber Reinforced Polyamide
    under Superimposed Mechanical-Enviromental Fatigue, 2018.
date_created: 2021-11-22T07:34:02Z
date_updated: 2022-01-06T06:57:43Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: Failure behavior of short glass fiber reinforced polyamide under superimposed
  mechanical-enviromental fatigue
type: dissertation
user_id: '44116'
year: '2018'
...
---
_id: '27659'
author:
- first_name: Frauke
  full_name: Reinders , Frauke
  last_name: 'Reinders '
citation:
  ama: Reinders  F. <i>Analyse Und Modellierung Des Reckverfahrens von Mono- Und Biaxial
    Verstreckten Polypropylenfolien</i>.; 2018.
  apa: Reinders , F. (2018). <i>Analyse und Modellierung des Reckverfahrens von mono-
    und biaxial verstreckten Polypropylenfolien</i>.
  bibtex: '@book{Reinders _2018, title={Analyse und Modellierung des Reckverfahrens
    von mono- und biaxial verstreckten Polypropylenfolien}, author={Reinders , Frauke},
    year={2018} }'
  chicago: Reinders , Frauke. <i>Analyse Und Modellierung Des Reckverfahrens von Mono-
    Und Biaxial Verstreckten Polypropylenfolien</i>, 2018.
  ieee: F. Reinders , <i>Analyse und Modellierung des Reckverfahrens von mono- und
    biaxial verstreckten Polypropylenfolien</i>. 2018.
  mla: Reinders , Frauke. <i>Analyse Und Modellierung Des Reckverfahrens von Mono-
    Und Biaxial Verstreckten Polypropylenfolien</i>. 2018.
  short: F. Reinders , Analyse Und Modellierung Des Reckverfahrens von Mono- Und Biaxial
    Verstreckten Polypropylenfolien, 2018.
date_created: 2021-11-22T07:34:53Z
date_updated: 2022-01-06T06:57:43Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: Analyse und Modellierung des Reckverfahrens von mono- und biaxial verstreckten
  Polypropylenfolien
type: dissertation
user_id: '44116'
year: '2018'
...
---
_id: '27660'
author:
- first_name: Jan-Christoph
  full_name: Zarges, Jan-Christoph
  last_name: Zarges
citation:
  ama: Zarges J-C. <i>Charakterisierung Des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden</i>.;
    2018.
  apa: Zarges, J.-C. (2018). <i>Charakterisierung des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden</i>.
  bibtex: '@book{Zarges_2018, title={Charakterisierung des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden},
    author={Zarges, Jan-Christoph}, year={2018} }'
  chicago: Zarges, Jan-Christoph. <i>Charakterisierung Des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden</i>,
    2018.
  ieee: J.-C. Zarges, <i>Charakterisierung des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden</i>.
    2018.
  mla: Zarges, Jan-Christoph. <i>Charakterisierung Des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden</i>.
    2018.
  short: J.-C. Zarges, Charakterisierung Des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden,
    2018.
date_created: 2021-11-22T07:35:52Z
date_updated: 2022-01-06T06:57:43Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: Charakterisierung des Bruchverhaltens von Polypropylen-Celluloseregeneratfaser-Verbunden
type: dissertation
user_id: '44116'
year: '2018'
...
---
_id: '27662'
author:
- first_name: Philipp Alexander
  full_name: Nikoleizig , Philipp Alexander
  last_name: 'Nikoleizig '
citation:
  ama: Nikoleizig  PA. <i>Inverse Thermische Spritzgießwerkzeugauslegung Auf Basis
    Des Lokalen Kühlbedarfs </i>.; 2018.
  apa: Nikoleizig , P. A. (2018). <i>Inverse thermische Spritzgießwerkzeugauslegung
    auf Basis des lokalen Kühlbedarfs </i>.
  bibtex: '@book{Nikoleizig _2018, title={Inverse thermische Spritzgießwerkzeugauslegung
    auf Basis des lokalen Kühlbedarfs }, author={Nikoleizig , Philipp Alexander},
    year={2018} }'
  chicago: Nikoleizig , Philipp Alexander. <i>Inverse Thermische Spritzgießwerkzeugauslegung
    Auf Basis Des Lokalen Kühlbedarfs </i>, 2018.
  ieee: P. A. Nikoleizig , <i>Inverse thermische Spritzgießwerkzeugauslegung auf Basis
    des lokalen Kühlbedarfs </i>. 2018.
  mla: Nikoleizig , Philipp Alexander. <i>Inverse Thermische Spritzgießwerkzeugauslegung
    Auf Basis Des Lokalen Kühlbedarfs </i>. 2018.
  short: P.A. Nikoleizig , Inverse Thermische Spritzgießwerkzeugauslegung Auf Basis
    Des Lokalen Kühlbedarfs , 2018.
date_created: 2021-11-22T07:38:03Z
date_updated: 2022-01-06T06:57:43Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: 'Inverse thermische Spritzgießwerkzeugauslegung auf Basis des lokalen Kühlbedarfs '
type: dissertation
user_id: '44116'
year: '2018'
...
---
_id: '22020'
abstract:
- lang: eng
  text: By adding fibers to a polymer matrix, a reinforcement of the material can
    be achieved. Short fiber-reinforced polymers can easily be processed by the Fused
    Deposition Modeling (FDM) process without major modifications to the processing
    machine. For instance,short fiber-reinforced filaments can be processed to produce
    short fiber-reinforced components in the FDM process. In many other additive manufacturing
    processes this is not possible at this low cost. The choice of the matrix material,
    fiber type, fiber length and fiber orientation have a major influence on the properties
    of the produced component. In this paper, short fiber-reinforced filaments are
    processed by the FDM process. The processing properties and the resulting part
    properties are investigated with regard to fiber-specific influences. Additionally,
    the effects of different strand geometries and thus changed flow fields on the
    fiber orientation and mechanical part properties are investigated.
author:
- first_name: C.
  full_name: Schumacher, C.
  last_name: Schumacher
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: S.
  full_name: Gnaase, S.
  last_name: Gnaase
citation:
  ama: 'Schumacher C, Schöppner V, Gnaase S. Processing Short Fiber Reinforced Polymers
    in the Fused Deposition Modeling Process. In: <i>29th Annual International Solid
    Freeform Fabrication Symposium</i>. Vol 29. ; 2018:1112-1120. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>'
  apa: Schumacher, C., Schöppner, V., &#38; Gnaase, S. (2018). Processing Short Fiber
    Reinforced Polymers in the Fused Deposition Modeling Process. <i>29th Annual International
    Solid Freeform Fabrication Symposium</i>, <i>29</i>, 1112–1120. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>
  bibtex: '@inproceedings{Schumacher_Schöppner_Gnaase_2018, title={Processing Short
    Fiber Reinforced Polymers in the Fused Deposition Modeling Process}, volume={29},
    DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>},
    booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Schumacher,
    C. and Schöppner, Volker and Gnaase, S.}, year={2018}, pages={1112–1120} }'
  chicago: Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber
    Reinforced Polymers in the Fused Deposition Modeling Process.” In <i>29th Annual
    International Solid Freeform Fabrication Symposium</i>, 29:1112–20, 2018. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>.
  ieee: 'C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced
    Polymers in the Fused Deposition Modeling Process,” in <i>29th Annual International
    Solid Freeform Fabrication Symposium</i>, 2018, vol. 29, pp. 1112–1120, doi: <a
    href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>.'
  mla: Schumacher, C., et al. “Processing Short Fiber Reinforced Polymers in the Fused
    Deposition Modeling Process.” <i>29th Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 29, 2018, pp. 1112–20, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>.
  short: 'C. Schumacher, V. Schöppner, S. Gnaase, in: 29th Annual International Solid
    Freeform Fabrication Symposium, 2018, pp. 1112–1120.'
date_created: 2021-05-07T13:22:59Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf
intvolume: '        29'
language:
- iso: eng
page: 1112-1120
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling
  Process
type: conference
user_id: '70729'
volume: 29
year: '2018'
...
---
_id: '22034'
author:
- first_name: F.
  full_name: Knoop, F.
  last_name: Knoop
- first_name: M.
  full_name: Köhler, M.
  last_name: Köhler
- first_name: Tobias
  full_name: Lieneke, Tobias
  id: '13956'
  last_name: Lieneke
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Knoop F, Köhler M, Lieneke T, Zimmer D, Schöppner V. Erarbeitung von Konstruktionsregeln
    für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.
    <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>.
    2018;10:83-88.'
  apa: 'Knoop, F., Köhler, M., Lieneke, T., Zimmer, D., &#38; Schöppner, V. (2018).
    Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen
    Einlegern in FDM-Strukturen. <i>Konstruktion - Zeitschrift Für Produktentwicklung
    Und Ingenieur-Werkstoffe</i>, <i>10</i>, 83–88.'
  bibtex: '@article{Knoop_Köhler_Lieneke_Zimmer_Schöppner_2018, title={Erarbeitung
    von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern
    in FDM-Strukturen}, volume={10}, journal={Konstruktion - Zeitschrift für Produktentwicklung
    und Ingenieur-Werkstoffe}, publisher={VDI Fachmedien GmbH &#38; Co. KG}, author={Knoop,
    F. and Köhler, M. and Lieneke, Tobias and Zimmer, Detmar and Schöppner, Volker},
    year={2018}, pages={83–88} }'
  chicago: 'Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner.
    “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen
    Einlegern in FDM-Strukturen.” <i>Konstruktion - Zeitschrift Für Produktentwicklung
    Und Ingenieur-Werkstoffe</i> 10 (2018): 83–88.'
  ieee: 'F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung
    von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern
    in FDM-Strukturen,” <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe</i>,
    vol. 10, pp. 83–88, 2018.'
  mla: 'Knoop, F., et al. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile:
    Integration von Metallischen Einlegern in FDM-Strukturen.” <i>Konstruktion - Zeitschrift
    Für Produktentwicklung Und Ingenieur-Werkstoffe</i>, vol. 10, VDI Fachmedien GmbH
    &#38; Co. KG, 2018, pp. 83–88.'
  short: F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, V. Schöppner, Konstruktion -
    Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018) 83–88.
date_created: 2021-05-07T13:23:15Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '146'
- _id: '321'
- _id: '9'
intvolume: '        10'
language:
- iso: eng
page: 83-88
publication: Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe
publication_identifier:
  issn:
  - '07205953'
publisher: VDI Fachmedien GmbH & Co. KG
status: public
title: 'Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen
  Einlegern in FDM-Strukturen'
type: journal_article
user_id: '70729'
volume: 10
year: '2018'
...
---
_id: '22035'
author:
- first_name: F.
  full_name: Knoop, F.
  last_name: Knoop
- first_name: Tobias
  full_name: Lieneke, Tobias
  id: '13956'
  last_name: Lieneke
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
citation:
  ama: Knoop F, Lieneke T, Schöppner V, Zimmer D. Additive Fertigung nach Maß. <i>Kunststoffe</i>.
    2018;6:70-73. doi:<a href="https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>
  apa: Knoop, F., Lieneke, T., Schöppner, V., &#38; Zimmer, D. (2018). Additive Fertigung
    nach Maß. <i>Kunststoffe</i>, <i>6</i>, 70–73. <a href="https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>
  bibtex: '@article{Knoop_Lieneke_Schöppner_Zimmer_2018, title={Additive Fertigung
    nach Maß}, volume={6}, DOI={<a href="https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>},
    journal={Kunststoffe}, author={Knoop, F. and Lieneke, Tobias and Schöppner, Volker
    and Zimmer, Detmar}, year={2018}, pages={70–73} }'
  chicago: 'Knoop, F., Tobias Lieneke, Volker Schöppner, and Detmar Zimmer. “Additive
    Fertigung Nach Maß.” <i>Kunststoffe</i> 6 (2018): 70–73. <a href="https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>.'
  ieee: 'F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach
    Maß,” <i>Kunststoffe</i>, vol. 6, pp. 70–73, 2018, doi: <a href="https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>.'
  mla: Knoop, F., et al. “Additive Fertigung Nach Maß.” <i>Kunststoffe</i>, vol. 6,
    2018, pp. 70–73, doi:<a href="https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf">https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf</a>.
  short: F. Knoop, T. Lieneke, V. Schöppner, D. Zimmer, Kunststoffe 6 (2018) 70–73.
date_created: 2021-05-07T13:23:16Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '146'
- _id: '321'
- _id: '9'
doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf
intvolume: '         6'
language:
- iso: eng
page: 70-73
publication: Kunststoffe
publication_identifier:
  issn:
  - 0023-5563
status: public
title: Additive Fertigung nach Maß
type: journal_article
user_id: '70729'
volume: 6
year: '2018'
...
---
_id: '22043'
abstract:
- lang: eng
  text: By adding fibers to a polymer matrix, a reinforcement of the material can
    be achieved. Short fiber-reinforced polymers can easily be processed by the Fused
    Deposition Modeling (FDM) process without major modifications to the processing
    machine. For instance, short fiber-reinforcedfilaments can be processed to produce
    short fiber-reinforced components in the FDM process. In many other additive manufacturing
    processes this is not possible at this low cost. The choice of the matrix material,
    fiber type, fiber length and fiber orientation have a major influence on the properties
    of the produced component. In this paper, short fiber-reinforced filaments are
    processed by the FDM process. The processing properties and the resulting part
    properties are investigatedwith regard to fiber-specific influences. Additionally,
    the effects of different strand geometries and thus changed flow fields on the
    fiber orientation and mechanical part properties are investigated.
author:
- first_name: C.
  full_name: Schumacher, C.
  last_name: Schumacher
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: S.
  full_name: Gnaase, S.
  last_name: Gnaase
citation:
  ama: 'Schumacher C, Schöppner V, Gnaase S. Processing Short Fiber Reinforced Polymers
    in the Fused Deposition Modeling Process. In: <i>29th Annual International Solid
    Freeform Fabrication Symposium</i>. Vol 29. ; 2018:1112-1120. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>'
  apa: Schumacher, C., Schöppner, V., &#38; Gnaase, S. (2018). Processing Short Fiber
    Reinforced Polymers in the Fused Deposition Modeling Process. <i>29th Annual International
    Solid Freeform Fabrication Symposium</i>, <i>29</i>, 1112–1120. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>
  bibtex: '@inproceedings{Schumacher_Schöppner_Gnaase_2018, title={Processing Short
    Fiber Reinforced Polymers in the Fused Deposition Modeling Process}, volume={29},
    DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>},
    booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Schumacher,
    C. and Schöppner, Volker and Gnaase, S.}, year={2018}, pages={1112–1120} }'
  chicago: Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber
    Reinforced Polymers in the Fused Deposition Modeling Process.” In <i>29th Annual
    International Solid Freeform Fabrication Symposium</i>, 29:1112–20, 2018. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>.
  ieee: 'C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced
    Polymers in the Fused Deposition Modeling Process,” in <i>29th Annual International
    Solid Freeform Fabrication Symposium</i>, 2018, vol. 29, pp. 1112–1120, doi: <a
    href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>.'
  mla: Schumacher, C., et al. “Processing Short Fiber Reinforced Polymers in the Fused
    Deposition Modeling Process.” <i>29th Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 29, 2018, pp. 1112–20, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf</a>.
  short: 'C. Schumacher, V. Schöppner, S. Gnaase, in: 29th Annual International Solid
    Freeform Fabrication Symposium, 2018, pp. 1112–1120.'
date_created: 2021-05-07T13:23:26Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf
intvolume: '        29'
language:
- iso: eng
page: 1112-1120
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling
  Process
type: conference
user_id: '70729'
volume: 29
year: '2018'
...
---
_id: '15876'
author:
- first_name: Alan Adam
  full_name: Camberg, Alan Adam
  id: '60544'
  last_name: Camberg
- first_name: Katja
  full_name: Engelkemeier, Katja
  last_name: Engelkemeier
- first_name: Jan
  full_name: Dietrich, Jan
  last_name: Dietrich
- first_name: Thomas
  full_name: Heggemann, Thomas
  last_name: Heggemann
citation:
  ama: Camberg AA, Engelkemeier K, Dietrich J, Heggemann T. Top-down design of tailored
    fiber-metal laminates. <i>Lightweight Design worldwide</i>. 2018;11(2):24-29.
    doi:<a href="https://doi.org/10.1007/s41777-018-0004-1">10.1007/s41777-018-0004-1</a>
  apa: Camberg, A. A., Engelkemeier, K., Dietrich, J., &#38; Heggemann, T. (2018).
    Top-down design of tailored fiber-metal laminates. <i>Lightweight Design Worldwide</i>,
    <i>11</i>(2), 24–29. <a href="https://doi.org/10.1007/s41777-018-0004-1">https://doi.org/10.1007/s41777-018-0004-1</a>
  bibtex: '@article{Camberg_Engelkemeier_Dietrich_Heggemann_2018, title={Top-down
    design of tailored fiber-metal laminates}, volume={11}, DOI={<a href="https://doi.org/10.1007/s41777-018-0004-1">10.1007/s41777-018-0004-1</a>},
    number={2}, journal={Lightweight Design worldwide}, publisher={Springer Vieweg},
    author={Camberg, Alan Adam and Engelkemeier, Katja and Dietrich, Jan and Heggemann,
    Thomas}, year={2018}, pages={24–29} }'
  chicago: 'Camberg, Alan Adam, Katja Engelkemeier, Jan Dietrich, and Thomas Heggemann.
    “Top-down Design of Tailored Fiber-Metal Laminates.” <i>Lightweight Design Worldwide</i>
    11, no. 2 (2018): 24–29. <a href="https://doi.org/10.1007/s41777-018-0004-1">https://doi.org/10.1007/s41777-018-0004-1</a>.'
  ieee: A. A. Camberg, K. Engelkemeier, J. Dietrich, and T. Heggemann, “Top-down design
    of tailored fiber-metal laminates,” <i>Lightweight Design worldwide</i>, vol.
    11, no. 2, pp. 24–29, 2018.
  mla: Camberg, Alan Adam, et al. “Top-down Design of Tailored Fiber-Metal Laminates.”
    <i>Lightweight Design Worldwide</i>, vol. 11, no. 2, Springer Vieweg, 2018, pp.
    24–29, doi:<a href="https://doi.org/10.1007/s41777-018-0004-1">10.1007/s41777-018-0004-1</a>.
  short: A.A. Camberg, K. Engelkemeier, J. Dietrich, T. Heggemann, Lightweight Design
    Worldwide 11 (2018) 24–29.
date_created: 2020-02-11T10:25:31Z
date_updated: 2022-01-06T06:52:39Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1007/s41777-018-0004-1
intvolume: '        11'
issue: '2'
language:
- iso: eng
page: 24-29
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Lightweight Design worldwide
publication_identifier:
  issn:
  - 2510-2877
publication_status: published
publisher: Springer Vieweg
status: public
title: Top-down design of tailored fiber-metal laminates
type: journal_article
user_id: '60544'
volume: 11
year: '2018'
...
---
_id: '15977'
author:
- first_name: Alper
  full_name: Tasdemirci, Alper
  last_name: Tasdemirci
- first_name: Emine Fulya
  full_name: Akbulut Irmak, Emine Fulya
  id: '72008'
  last_name: Akbulut Irmak
  orcid: 0000-0002-1338-810X
- first_name: Erkan
  full_name: Guzel, Erkan
  last_name: Guzel
- first_name: Firat
  full_name: Tuzgel, Firat
  last_name: Tuzgel
- first_name: Atacan
  full_name: Yucesoy, Atacan
  last_name: Yucesoy
- first_name: Selim
  full_name: Sahin, Selim
  last_name: Sahin
- first_name: Mustafa
  full_name: Guden, Mustafa
  last_name: Guden
citation:
  ama: 'Tasdemirci A, Akbulut Irmak EF, Guzel E, et al. Crushing behavior and energy
    absorption performance of a bio-inspired metallic structure: Experimental and
    numerical study. <i>Thin-Walled Structures</i>. 2018:547-555. doi:<a href="https://doi.org/10.1016/j.tws.2018.07.051">10.1016/j.tws.2018.07.051</a>'
  apa: 'Tasdemirci, A., Akbulut Irmak, E. F., Guzel, E., Tuzgel, F., Yucesoy, A.,
    Sahin, S., &#38; Guden, M. (2018). Crushing behavior and energy absorption performance
    of a bio-inspired metallic structure: Experimental and numerical study. <i>Thin-Walled
    Structures</i>, 547–555. <a href="https://doi.org/10.1016/j.tws.2018.07.051">https://doi.org/10.1016/j.tws.2018.07.051</a>'
  bibtex: '@article{Tasdemirci_Akbulut Irmak_Guzel_Tuzgel_Yucesoy_Sahin_Guden_2018,
    title={Crushing behavior and energy absorption performance of a bio-inspired metallic
    structure: Experimental and numerical study}, DOI={<a href="https://doi.org/10.1016/j.tws.2018.07.051">10.1016/j.tws.2018.07.051</a>},
    journal={Thin-Walled Structures}, author={Tasdemirci, Alper and Akbulut Irmak,
    Emine Fulya and Guzel, Erkan and Tuzgel, Firat and Yucesoy, Atacan and Sahin,
    Selim and Guden, Mustafa}, year={2018}, pages={547–555} }'
  chicago: 'Tasdemirci, Alper, Emine Fulya Akbulut Irmak, Erkan Guzel, Firat Tuzgel,
    Atacan Yucesoy, Selim Sahin, and Mustafa Guden. “Crushing Behavior and Energy
    Absorption Performance of a Bio-Inspired Metallic Structure: Experimental and
    Numerical Study.” <i>Thin-Walled Structures</i>, 2018, 547–55. <a href="https://doi.org/10.1016/j.tws.2018.07.051">https://doi.org/10.1016/j.tws.2018.07.051</a>.'
  ieee: 'A. Tasdemirci <i>et al.</i>, “Crushing behavior and energy absorption performance
    of a bio-inspired metallic structure: Experimental and numerical study,” <i>Thin-Walled
    Structures</i>, pp. 547–555, 2018.'
  mla: 'Tasdemirci, Alper, et al. “Crushing Behavior and Energy Absorption Performance
    of a Bio-Inspired Metallic Structure: Experimental and Numerical Study.” <i>Thin-Walled
    Structures</i>, 2018, pp. 547–55, doi:<a href="https://doi.org/10.1016/j.tws.2018.07.051">10.1016/j.tws.2018.07.051</a>.'
  short: A. Tasdemirci, E.F. Akbulut Irmak, E. Guzel, F. Tuzgel, A. Yucesoy, S. Sahin,
    M. Guden, Thin-Walled Structures (2018) 547–555.
date_created: 2020-02-21T15:34:12Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2018.07.051
extern: '1'
language:
- iso: eng
page: 547-555
publication: Thin-Walled Structures
publication_identifier:
  issn:
  - 0263-8231
publication_status: published
status: public
title: 'Crushing behavior and energy absorption performance of a bio-inspired metallic
  structure: Experimental and numerical study'
type: journal_article
user_id: '72008'
year: '2018'
...
---
_id: '16034'
author:
- first_name: Alan Adam
  full_name: Camberg, Alan Adam
  id: '60544'
  last_name: Camberg
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Camberg AA, Tröster T. Optimization-based material design of tailored stacked
    hybrids for further improvement in lightweight car body structures. In: <i>HYBRID
    - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>. DGM - Deutsche Gesellschaft
    für Materialkunde e.V.; 2018.'
  apa: 'Camberg, A. A., &#38; Tröster, T. (2018). Optimization-based material design
    of tailored stacked hybrids for further improvement in lightweight car body structures.
    In <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>. Bremen: DGM -
    Deutsche Gesellschaft für Materialkunde e.V.'
  bibtex: '@inproceedings{Camberg_Tröster_2018, title={Optimization-based material
    design of tailored stacked hybrids for further improvement in lightweight car
    body structures}, booktitle={HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS},
    publisher={DGM - Deutsche Gesellschaft für Materialkunde e.V.}, author={Camberg,
    Alan Adam and Tröster, Thomas}, year={2018} }'
  chicago: Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design
    of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.”
    In <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>. DGM - Deutsche
    Gesellschaft für Materialkunde e.V., 2018.
  ieee: A. A. Camberg and T. Tröster, “Optimization-based material design of tailored
    stacked hybrids for further improvement in lightweight car body structures,” in
    <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>, Bremen, 2018.
  mla: Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design
    of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.”
    <i>HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS</i>, DGM - Deutsche Gesellschaft
    für Materialkunde e.V., 2018.
  short: 'A.A. Camberg, T. Tröster, in: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS,
    DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.'
conference:
  end_date: 2018-04-19
  location: Bremen
  name: 3rd International Conference on Hybrid Materials and Structures
  start_date: 2018-04-18
date_created: 2020-02-24T14:59:47Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS
publication_identifier:
  isbn:
  - 978-3-88355-417-4
publication_status: published
publisher: DGM - Deutsche Gesellschaft für Materialkunde e.V.
status: public
title: Optimization-based material design of tailored stacked hybrids for further
  improvement in lightweight car body structures
type: conference
user_id: '60544'
year: '2018'
...
---
_id: '16039'
author:
- first_name: Dominik
  full_name: Ahlers, Dominik
  id: '11207'
  last_name: Ahlers
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Ahlers D, Tröster T. Entwicklung einer Prozessroute für die Luftfahrtindustrie
    mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. In: ; 2018.'
  apa: Ahlers, D., &#38; Tröster, T. (2018). Entwicklung einer Prozessroute für die
    Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V.
    Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.
  bibtex: '@inproceedings{Ahlers_Tröster_2018, title={Entwicklung einer Prozessroute
    für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess
    von Ti6Al4V}, author={Ahlers, Dominik and Tröster, Thomas}, year={2018} }'
  chicago: Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für
    die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von
    Ti6Al4V,” 2018.
  ieee: D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie
    mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at
    the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.
  mla: Ahlers, Dominik, and Thomas Tröster. <i>Entwicklung einer Prozessroute für
    die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von
    Ti6Al4V</i>. 2018.
  short: 'D. Ahlers, T. Tröster, in: 2018.'
conference:
  location: Erfurt
  name: Rapid.Tech 2018 – Fachforum Luftfahrt
  start_date: 2018-06-07
date_created: 2020-02-24T15:57:52Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate
  im Laserstrahlschmelzprozess von Ti6Al4V
type: conference
user_id: '11207'
year: '2018'
...
---
_id: '16040'
author:
- first_name: Z.
  full_name: Wang, Z.
  last_name: Wang
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Wang Z, Tröster T. Influences of interface on the adhesion and corrosion properties
    of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer
    moulding. In: ; 2018.'
  apa: Wang, Z., &#38; Tröster, T. (2018). Influences of interface on the adhesion
    and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum
    assisted resin transfer moulding. Presented at the 21th International Conference
    on Composite Structures (ICCS21), Bologna, Italy.
  bibtex: '@inproceedings{Wang_Tröster_2018, title={Influences of interface on the
    adhesion and corrosion properties of steel-CFRP hybrid structures manufactured
    by vacuum assisted resin transfer moulding}, author={Wang, Z. and Tröster, Thomas},
    year={2018} }'
  chicago: Wang, Z., and Thomas Tröster. “Influences of Interface on the Adhesion
    and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum
    Assisted Resin Transfer Moulding,” 2018.
  ieee: Z. Wang and T. Tröster, “Influences of interface on the adhesion and corrosion
    properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin
    transfer moulding,” presented at the 21th International Conference on Composite
    Structures (ICCS21), Bologna, Italy, 2018.
  mla: Wang, Z., and Thomas Tröster. <i>Influences of Interface on the Adhesion and
    Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted
    Resin Transfer Moulding</i>. 2018.
  short: 'Z. Wang, T. Tröster, in: 2018.'
conference:
  end_date: 2018-09-07
  location: Bologna, Italy
  name: 21th International Conference on Composite Structures (ICCS21)
  start_date: 2018-09-04
date_created: 2020-02-24T15:59:53Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influences of interface on the adhesion and corrosion properties of steel-CFRP
  hybrid structures manufactured by vacuum assisted resin transfer moulding
type: conference
user_id: '72008'
year: '2018'
...
---
_id: '16042'
author:
- first_name: Marcel
  full_name: Triebus, Marcel
  id: '66036'
  last_name: Triebus
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Alan Adam
  full_name: Camberg, Alan Adam
  id: '60544'
  last_name: Camberg
- first_name: S.
  full_name: Bienia, S.
  last_name: Bienia
- first_name: K.
  full_name: Dröder, K.
  last_name: Dröder
citation:
  ama: 'Triebus M, Tröster T, Camberg AA, Bienia S, Dröder K. Modelling the Interface
    of Hybrid Metal-FRP Components Joint by Form Closures. In: <i>15. Deutsches LS-Dyna
    Forum</i>. ; 2018.'
  apa: Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., &#38; Dröder, K. (2018).
    Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.
    In <i>15. Deutsches LS-Dyna Forum</i>. Bamberg.
  bibtex: '@inproceedings{Triebus_Tröster_Camberg_Bienia_Dröder_2018, title={Modelling
    the Interface of Hybrid Metal-FRP Components Joint by Form Closures}, booktitle={15.
    Deutsches LS-Dyna Forum}, author={Triebus, Marcel and Tröster, Thomas and Camberg,
    Alan Adam and Bienia, S. and Dröder, K.}, year={2018} }'
  chicago: Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder.
    “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.”
    In <i>15. Deutsches LS-Dyna Forum</i>, 2018.
  ieee: M. Triebus, T. Tröster, A. A. Camberg, S. Bienia, and K. Dröder, “Modelling
    the Interface of Hybrid Metal-FRP Components Joint by Form Closures,” in <i>15.
    Deutsches LS-Dyna Forum</i>, Bamberg, 2018.
  mla: Triebus, Marcel, et al. “Modelling the Interface of Hybrid Metal-FRP Components
    Joint by Form Closures.” <i>15. Deutsches LS-Dyna Forum</i>, 2018.
  short: 'M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches
    LS-Dyna Forum, 2018.'
conference:
  end_date: 2018-10-17
  location: Bamberg
  name: 15. Deutsches LS-Dyna Forum
  start_date: 2018-10-15
date_created: 2020-02-24T16:03:13Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.dynamore.de/de/download/papers/2018-ls-dyna-forum/papers-2018/montag-15.-oktober-2018/crash-lightweight-composites/modelling-the-interface-of-hybrid-metal-frp-components-joint-by-form-closures
oa: '1'
popular_science: '1'
publication: 15. Deutsches LS-Dyna Forum
status: public
title: Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures
type: conference
user_id: '60544'
year: '2018'
...
---
_id: '16043'
author:
- first_name: Alan Adam
  full_name: Camberg, Alan Adam
  id: '60544'
  last_name: Camberg
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: A.
  full_name: Schneidt , A.
  last_name: 'Schneidt '
- first_name: N.
  full_name: Sotirov , N.
  last_name: 'Sotirov '
- first_name: J.
  full_name: Tölle, J.
  last_name: Tölle
citation:
  ama: 'Camberg AA, Tröster T, Schneidt  A, Sotirov  N, Tölle J. The influence of
    damage accumulation on failure prediction: a comparative assessment of *MAT_224
    and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming.
    In: <i>15. Deutsches LS-Dyna Forum</i>. ; 2018.'
  apa: 'Camberg, A. A., Tröster, T., Schneidt , A., Sotirov , N., &#38; Tölle, J.
    (2018). The influence of damage accumulation on failure prediction: a comparative
    assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal
    sheet metal forming. In <i>15. Deutsches LS-Dyna Forum</i>. Bamberg.'
  bibtex: '@inproceedings{Camberg_Tröster_Schneidt _Sotirov _Tölle_2018, title={The
    influence of damage accumulation on failure prediction: a comparative assessment
    of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet
    metal forming}, booktitle={15. Deutsches LS-Dyna Forum}, author={Camberg, Alan
    Adam and Tröster, Thomas and Schneidt , A. and Sotirov , N. and Tölle, J.}, year={2018}
    }'
  chicago: 'Camberg, Alan Adam, Thomas Tröster, A. Schneidt , N. Sotirov , and J.
    Tölle. “The Influence of Damage Accumulation on Failure Prediction: A Comparative
    Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal
    Sheet Metal Forming.” In <i>15. Deutsches LS-Dyna Forum</i>, 2018.'
  ieee: 'A. A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , and J. Tölle, “The
    influence of damage accumulation on failure prediction: a comparative assessment
    of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet
    metal forming,” in <i>15. Deutsches LS-Dyna Forum</i>, Bamberg, 2018.'
  mla: 'Camberg, Alan Adam, et al. “The Influence of Damage Accumulation on Failure
    Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the
    Application in Non-Isothermal Sheet Metal Forming.” <i>15. Deutsches LS-Dyna Forum</i>,
    2018.'
  short: 'A.A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , J. Tölle, in: 15. Deutsches
    LS-Dyna Forum, 2018.'
conference:
  end_date: 2018-10-17
  location: Bamberg
  name: 15. Deutsches LS-Dyna Forum
  start_date: 2018-10-15
date_created: 2020-02-24T16:05:37Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.dynamore.de/de/download/papers/2018-ls-dyna-forum/papers-2018/dienstag-16.-oktober/process-metal-forming-iii/the-influence-of-damage-accumulation-on-failure-prediction-a-comparative-assessment-of-mat_224-and-mat_024-gissmo-for-the-application-in-non-isothermal-sheet-metal-forming
oa: '1'
popular_science: '1'
publication: 15. Deutsches LS-Dyna Forum
status: public
title: 'The influence of damage accumulation on failure prediction: a comparative
  assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal
  sheet metal forming'
type: conference
user_id: '60544'
year: '2018'
...
---
_id: '16045'
author:
- first_name: Alan Adam
  full_name: Camberg, Alan Adam
  id: '60544'
  last_name: Camberg
citation:
  ama: Camberg AA. Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von
    Gesamtfahrzeugsimulationen. <i>Carbon Composites Magazin</i>. 2018;(2):15-16.
  apa: Camberg, A. A. (2018). Top-down-Entwicklung von Faser-Metall-Laminaten auf
    Grundlage von Gesamtfahrzeugsimulationen. <i>Carbon Composites Magazin</i>, (2),
    15–16.
  bibtex: '@article{Camberg_2018, title={Top-down-Entwicklung von Faser-Metall-Laminaten
    auf Grundlage von Gesamtfahrzeugsimulationen}, number={2}, journal={Carbon Composites
    Magazin}, author={Camberg, Alan Adam}, year={2018}, pages={15–16} }'
  chicago: 'Camberg, Alan Adam. “Top-down-Entwicklung von Faser-Metall-Laminaten auf
    Grundlage von Gesamtfahrzeugsimulationen.” <i>Carbon Composites Magazin</i>, no.
    2 (2018): 15–16.'
  ieee: A. A. Camberg, “Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage
    von Gesamtfahrzeugsimulationen,” <i>Carbon Composites Magazin</i>, no. 2, pp.
    15–16, 2018.
  mla: Camberg, Alan Adam. “Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage
    von Gesamtfahrzeugsimulationen.” <i>Carbon Composites Magazin</i>, no. 2, 2018,
    pp. 15–16.
  short: A.A. Camberg, Carbon Composites Magazin (2018) 15–16.
date_created: 2020-02-24T16:09:35Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
issue: '2'
language:
- iso: ger
page: 15-16
publication: Carbon Composites Magazin
publication_identifier:
  issn:
  - 2366-8024
status: public
title: Top-down-Entwicklung von Faser-Metall-Laminaten auf Grundlage von Gesamtfahrzeugsimulationen
type: journal_article
user_id: '72008'
year: '2018'
...
---
_id: '16056'
author:
- first_name: Swetlana
  full_name: Schweizer, Swetlana
  id: '8938'
  last_name: Schweizer
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Schweizer S, Tröster T. Holz als Werkstoff im Automobil. In: ; 2018.'
  apa: Schweizer, S., &#38; Tröster, T. (2018). <i>Holz als Werkstoff im Automobil</i>.
    2. Siegener Leichtbaukolloquium, Siegen.
  bibtex: '@inproceedings{Schweizer_Tröster_2018, title={Holz als Werkstoff im Automobil},
    author={Schweizer, Swetlana and Tröster, Thomas}, year={2018} }'
  chicago: Schweizer, Swetlana, and Thomas Tröster. “Holz als Werkstoff im Automobil,”
    2018.
  ieee: S. Schweizer and T. Tröster, “Holz als Werkstoff im Automobil,” presented
    at the 2. Siegener Leichtbaukolloquium, Siegen, 2018.
  mla: Schweizer, Swetlana, and Thomas Tröster. <i>Holz als Werkstoff im Automobil</i>.
    2018.
  short: 'S. Schweizer, T. Tröster, in: 2018.'
conference:
  location: Siegen
  name: 2. Siegener Leichtbaukolloquium
  start_date: 2018-10-16
date_created: 2020-02-24T16:24:19Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Holz als Werkstoff im Automobil
type: conference_abstract
user_id: '8938'
year: '2018'
...