---
_id: '23904'
article_number: '1600397'
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Arkadii
full_name: Briukhanov, Arkadii
last_name: Briukhanov
- first_name: Zoia
full_name: Briukhanova, Zoia
last_name: Briukhanova
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Grydin O, Andreiev A, Briukhanov A, Briukhanova Z, Schaper M. Evolution of
Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold
Asymmetric Rolling. steel research international. 2017. doi:10.1002/srin.201600397
apa: Grydin, O., Andreiev, A., Briukhanov, A., Briukhanova, Z., & Schaper, M.
(2017). Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon
Steel at Cold Asymmetric Rolling. Steel Research International. https://doi.org/10.1002/srin.201600397
bibtex: '@article{Grydin_Andreiev_Briukhanov_Briukhanova_Schaper_2017, title={Evolution
of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold
Asymmetric Rolling}, DOI={10.1002/srin.201600397},
number={1600397}, journal={steel research international}, author={Grydin, Olexandr
and Andreiev, Anatolii and Briukhanov, Arkadii and Briukhanova, Zoia and Schaper,
Mirko}, year={2017} }'
chicago: Grydin, Olexandr, Anatolii Andreiev, Arkadii Briukhanov, Zoia Briukhanova,
and Mirko Schaper. “Evolution of Microstructure, Properties and Texture of a Two-Phase
Low-Carbon Steel at Cold Asymmetric Rolling.” Steel Research International,
2017. https://doi.org/10.1002/srin.201600397.
ieee: O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution
of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold
Asymmetric Rolling,” steel research international, 2017.
mla: Grydin, Olexandr, et al. “Evolution of Microstructure, Properties and Texture
of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” Steel Research
International, 1600397, 2017, doi:10.1002/srin.201600397.
short: O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, M. Schaper, Steel
Research International (2017).
date_created: 2021-09-08T07:30:56Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '158'
- _id: '321'
doi: 10.1002/srin.201600397
language:
- iso: eng
publication: steel research international
publication_identifier:
issn:
- 1611-3683
publication_status: published
status: public
title: Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon
Steel at Cold Asymmetric Rolling
type: journal_article
user_id: '50215'
year: '2017'
...
---
_id: '23909'
author:
- first_name: Benjamin
full_name: Lossen, Benjamin
last_name: Lossen
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Lossen B, Andreiev A, Homberg W, Schaper M. Friction-Spinning – Possibility
of Grain Structure Adjustment. Procedia Engineering. 2017:1749-1754. doi:10.1016/j.proeng.2017.10.933
apa: Lossen, B., Andreiev, A., Homberg, W., & Schaper, M. (2017). Friction-Spinning
– Possibility of Grain Structure Adjustment. Procedia Engineering, 1749–1754.
https://doi.org/10.1016/j.proeng.2017.10.933
bibtex: '@article{Lossen_Andreiev_Homberg_Schaper_2017, title={Friction-Spinning
– Possibility of Grain Structure Adjustment}, DOI={10.1016/j.proeng.2017.10.933},
journal={Procedia Engineering}, author={Lossen, Benjamin and Andreiev, Anatolii
and Homberg, Werner and Schaper, Mirko}, year={2017}, pages={1749–1754} }'
chicago: Lossen, Benjamin, Anatolii Andreiev, Werner Homberg, and Mirko Schaper.
“Friction-Spinning – Possibility of Grain Structure Adjustment.” Procedia Engineering,
2017, 1749–54. https://doi.org/10.1016/j.proeng.2017.10.933.
ieee: B. Lossen, A. Andreiev, W. Homberg, and M. Schaper, “Friction-Spinning – Possibility
of Grain Structure Adjustment,” Procedia Engineering, pp. 1749–1754, 2017.
mla: Lossen, Benjamin, et al. “Friction-Spinning – Possibility of Grain Structure
Adjustment.” Procedia Engineering, 2017, pp. 1749–54, doi:10.1016/j.proeng.2017.10.933.
short: B. Lossen, A. Andreiev, W. Homberg, M. Schaper, Procedia Engineering (2017)
1749–1754.
date_created: 2021-09-08T07:31:59Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '158'
- _id: '321'
- _id: '156'
doi: 10.1016/j.proeng.2017.10.933
language:
- iso: eng
page: 1749-1754
publication: Procedia Engineering
publication_identifier:
issn:
- 1877-7058
publication_status: published
status: public
title: Friction-Spinning – Possibility of Grain Structure Adjustment
type: journal_article
user_id: '50215'
year: '2017'
...
---
_id: '23910'
author:
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Andreiev A, Grydin O, Schaper M. A Rapid Heating Method for Press Hardening
Processing. In: Proceedings of the 3rd Pan American Materials Congress.
Cham; 2017. doi:10.1007/978-3-319-52132-9_72'
apa: Andreiev, A., Grydin, O., & Schaper, M. (2017). A Rapid Heating Method
for Press Hardening Processing. In Proceedings of the 3rd Pan American Materials
Congress. Cham. https://doi.org/10.1007/978-3-319-52132-9_72
bibtex: '@inbook{Andreiev_Grydin_Schaper_2017, place={Cham}, title={A Rapid Heating
Method for Press Hardening Processing}, DOI={10.1007/978-3-319-52132-9_72},
booktitle={Proceedings of the 3rd Pan American Materials Congress}, author={Andreiev,
Anatolii and Grydin, Olexandr and Schaper, Mirko}, year={2017} }'
chicago: Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “A Rapid Heating
Method for Press Hardening Processing.” In Proceedings of the 3rd Pan American
Materials Congress. Cham, 2017. https://doi.org/10.1007/978-3-319-52132-9_72.
ieee: A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press
Hardening Processing,” in Proceedings of the 3rd Pan American Materials Congress,
Cham, 2017.
mla: Andreiev, Anatolii, et al. “A Rapid Heating Method for Press Hardening Processing.”
Proceedings of the 3rd Pan American Materials Congress, 2017, doi:10.1007/978-3-319-52132-9_72.
short: 'A. Andreiev, O. Grydin, M. Schaper, in: Proceedings of the 3rd Pan American
Materials Congress, Cham, 2017.'
date_created: 2021-09-08T07:32:09Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '158'
- _id: '321'
doi: 10.1007/978-3-319-52132-9_72
language:
- iso: eng
place: Cham
publication: Proceedings of the 3rd Pan American Materials Congress
publication_identifier:
issn:
- 2367-1181
- 2367-1696
publication_status: published
status: public
title: A Rapid Heating Method for Press Hardening Processing
type: book_chapter
user_id: '50215'
year: '2017'
...
---
_id: '22040'
abstract:
- lang: eng
text: Fused Deposition Modeling (FDM) is used for prototypes, single-partproduction
and small batch productions of thermoplastic components. This manufacturing technique
has the huge benefit that no forming tool is needed. The knowledge about dimensional
deviations which occur in the FDM process is necessary for calculating fits and
for determining tolerances. A major challenge is the reproducibility of the dimensional
accuracy of FDM parts and the reproducibility between different FDM machines.
There are many influential factors on the dimensional accuracy in the FDM process
for example geometric, material-specific or process-specific factors, which are
considered in this paper. The influence of the part position on the build platform
of a Stratasys Fortus 400mc is analyzed in terms of the achievable dimensional
accuracy. For this purpose, the temperature distribution in the actively heated
build chamber is investigated and possible correlations to the dimensional accuracy
are identified. The reproducibility of one machine is examined by a multiple production
of the test specimens. In addition, a comparison with three other FDM machines
from Stratasys is made. Afterwards, the long-term reproducibility of the dimensional
accuracy is verified to consider how environmental influences such as maintenance
or modification of machine components affect the dimensional accuracy of the FDM
process.
author:
- first_name: F.
full_name: Knoop, F.
last_name: Knoop
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knoop F, Lieneke T, Schöppner V. Reproduzierbarkeit der Maßhaltigkeit im Fused
Deposition Modeling. In: Rapid Tech - International Trade Show & Conference
for Additive Manufacturing. ; 2017:52-66. doi:10.3139/9783446454606.004'
apa: Knoop, F., Lieneke, T., & Schöppner, V. (2017). Reproduzierbarkeit der
Maßhaltigkeit im Fused Deposition Modeling. Rapid Tech - International Trade
Show & Conference for Additive Manufacturing, 52–66. https://doi.org/10.3139/9783446454606.004
bibtex: '@inproceedings{Knoop_Lieneke_Schöppner_2017, title={Reproduzierbarkeit
der Maßhaltigkeit im Fused Deposition Modeling}, DOI={10.3139/9783446454606.004},
booktitle={Rapid Tech - International Trade Show & Conference for Additive
Manufacturing}, author={Knoop, F. and Lieneke, Tobias and Schöppner, Volker},
year={2017}, pages={52–66} }'
chicago: Knoop, F., Tobias Lieneke, and Volker Schöppner. “Reproduzierbarkeit Der
Maßhaltigkeit Im Fused Deposition Modeling.” In Rapid Tech - International
Trade Show & Conference for Additive Manufacturing, 52–66, 2017. https://doi.org/10.3139/9783446454606.004.
ieee: 'F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit
im Fused Deposition Modeling,” in Rapid Tech - International Trade Show &
Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.'
mla: Knoop, F., et al. “Reproduzierbarkeit Der Maßhaltigkeit Im Fused Deposition
Modeling.” Rapid Tech - International Trade Show & Conference for Additive
Manufacturing, 2017, pp. 52–66, doi:10.3139/9783446454606.004.
short: 'F. Knoop, T. Lieneke, V. Schöppner, in: Rapid Tech - International Trade
Show & Conference for Additive Manufacturing, 2017, pp. 52–66.'
date_created: 2021-05-07T13:23:22Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '146'
- _id: '321'
- _id: '9'
doi: 10.3139/9783446454606.004
language:
- iso: eng
page: 52-66
publication: Rapid Tech - International Trade Show & Conference for Additive Manufacturing
status: public
title: Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling
type: conference
user_id: '70729'
year: '2017'
...
---
_id: '22042'
abstract:
- lang: eng
text: Compared to conventional polymer processing technologies the material selection
in the Fused Deposition Modelling (FDM) process is restricted. To expand the range
of materials the requirements for the material properties and the semi-finished
products (filaments) must be clarified. For this, a machine- and process-independent
rating of the processability is necessary. The established standards for the tensile
strength test apply to specimens with nearly isotropic mechanical properties.
The FDM process generates anisotropic parts. The properties are mainly influenced
by the machine quality and the data processing. It is not possible to test a material
for FDM independently of the machine and the data processing. In this paper, machine
and process specific influences are investigated. Considering these influences,
a custom-built specimen is created to test the tensile strength of the welding
seams for polyamide 6. This procedure allows a machine- and process-independent
rating of the processability in terms of tensile strength for different materials.
author:
- first_name: C.
full_name: Schumacher, C.
last_name: Schumacher
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: J.
full_name: Guntermann, J.
last_name: Guntermann
citation:
ama: 'Schumacher C, Schöppner V, Guntermann J. Considering machine- and process-specific
influences to create custom-built specimens for the Fused Deposition Modeling
process. In: 28th Annual International Solid Freeform Fabrication Symposium.
Vol 28. ; 2017:470-484. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf'
apa: Schumacher, C., Schöppner, V., & Guntermann, J. (2017). Considering machine-
and process-specific influences to create custom-built specimens for the Fused
Deposition Modeling process. 28th Annual International Solid Freeform Fabrication
Symposium, 28, 470–484. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf
bibtex: '@inproceedings{Schumacher_Schöppner_Guntermann_2017, title={Considering
machine- and process-specific influences to create custom-built specimens for
the Fused Deposition Modeling process}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Schumacher,
C. and Schöppner, Volker and Guntermann, J.}, year={2017}, pages={470–484} }'
chicago: Schumacher, C., Volker Schöppner, and J. Guntermann. “Considering Machine-
and Process-Specific Influences to Create Custom-Built Specimens for the Fused
Deposition Modeling Process.” In 28th Annual International Solid Freeform Fabrication
Symposium, 28:470–84, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
ieee: 'C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and
process-specific influences to create custom-built specimens for the Fused Deposition
Modeling process,” in 28th Annual International Solid Freeform Fabrication
Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.'
mla: Schumacher, C., et al. “Considering Machine- and Process-Specific Influences
to Create Custom-Built Specimens for the Fused Deposition Modeling Process.” 28th
Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017,
pp. 470–84, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
short: 'C. Schumacher, V. Schöppner, J. Guntermann, in: 28th Annual International
Solid Freeform Fabrication Symposium, 2017, pp. 470–484.'
date_created: 2021-05-07T13:23:24Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf
intvolume: ' 28'
language:
- iso: eng
page: 470-484
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Considering machine- and process-specific influences to create custom-built
specimens for the Fused Deposition Modeling process
type: conference
user_id: '70729'
volume: 28
year: '2017'
...
---
_id: '22045'
abstract:
- lang: eng
text: A widely used Additive Manufacturing (AM) technology is Fused Deposition Modeling
(FDM) to create prototypes and end-use parts with close-to-production thermoplastics.
For their use as a final product, it is necessary that additively manufactured
parts strictly adhere to the geometrical requirements of the technical drawing.
In this paper, the holes and cylinders of the cylindrical elements are investigated
in terms of achievable geometrical accuracy. For this purpose, different test
specimens that allow a measurement of inner and outer diameters from 3 to 80 mm
were designed. All specimens were measured with a coordinate measuring machine
(CMM) to evaluate deviations from the nominal dimension and form deviations. The
measuring method includes a scanning of the surface to record the course of dimensional
deviations over the diameter. Thus, it was possible to visualize how deviations
on cylindrical elements manufactured in FDM occur. In order to counteract these
deviations and to improve the dimensional accuracy, different shrink factors and
filling patterns were investigated. Consequently, an improvement of the dimensional
accuracy was achieved.
author:
- first_name: F.
full_name: Knoop, F.
last_name: Knoop
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knoop F, Schöppner V. Geometrical Accuracy of Holes and Cylinders Manufactured
with Fused Deposition Modeling. In: 28th Annual International Solid Freeform
Fabrication Symposium. Vol 28. ; 2017:2757-2776. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf'
apa: Knoop, F., & Schöppner, V. (2017). Geometrical Accuracy of Holes and Cylinders
Manufactured with Fused Deposition Modeling. 28th Annual International Solid
Freeform Fabrication Symposium, 28, 2757–2776. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf
bibtex: '@inproceedings{Knoop_Schöppner_2017, title={Geometrical Accuracy of Holes
and Cylinders Manufactured with Fused Deposition Modeling}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Knoop,
F. and Schöppner, Volker}, year={2017}, pages={2757–2776} }'
chicago: Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders
Manufactured with Fused Deposition Modeling.” In 28th Annual International
Solid Freeform Fabrication Symposium, 28:2757–76, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
ieee: 'F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured
with Fused Deposition Modeling,” in 28th Annual International Solid Freeform
Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.'
mla: Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders
Manufactured with Fused Deposition Modeling.” 28th Annual International Solid
Freeform Fabrication Symposium, vol. 28, 2017, pp. 2757–76, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
short: 'F. Knoop, V. Schöppner, in: 28th Annual International Solid Freeform Fabrication
Symposium, 2017, pp. 2757–2776.'
date_created: 2021-05-07T13:23:28Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf
intvolume: ' 28'
language:
- iso: eng
page: 2757-2776
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition
Modeling
type: conference
user_id: '70729'
volume: 28
year: '2017'
...
---
_id: '22049'
abstract:
- lang: eng
text: Um die Materialauswahl für den FDM-Prozess zu steigern, sollten die durch
den FDM-Prozess an das Material gestellten Anforderungen bekannt sein. Dazu ist
eine von der Maschine und der individuellen Datenaufbereitung möglichst unabhängige
Bewertung der FDM-Verarbeitungseignung wünschenswert. In diesem Artikel werden
eine Prüfmethode und ein dazu entwickelter Probekörper vorgestellt, mit dem die
Schweißnahtfestigkeit verschiedener Polyamid 6 Typen im FDM-Prozess ermittelt
und verglichen wird.
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: C.
full_name: Schumacher, C.
last_name: Schumacher
- first_name: J.
full_name: Guntermann, J.
last_name: Guntermann
citation:
ama: Schöppner V, Schumacher C, Guntermann J. Beurteilung der Schweißnahtfestigkeiten
verschiedener Kunststoffe im FDM-Prozess. Jahresmagazin Kunststofftechnik.
2017;1(1):108-114.
apa: Schöppner, V., Schumacher, C., & Guntermann, J. (2017). Beurteilung der
Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess. Jahresmagazin
Kunststofftechnik, 1(1), 108–114.
bibtex: '@article{Schöppner_Schumacher_Guntermann_2017, title={Beurteilung der Schweißnahtfestigkeiten
verschiedener Kunststoffe im FDM-Prozess}, volume={1}, number={1}, journal={Jahresmagazin
Kunststofftechnik}, publisher={Institut für Wissenschaftliche Veröffentlichungen},
author={Schöppner, Volker and Schumacher, C. and Guntermann, J.}, year={2017},
pages={108–114} }'
chicago: 'Schöppner, Volker, C. Schumacher, and J. Guntermann. “Beurteilung Der
Schweißnahtfestigkeiten Verschiedener Kunststoffe Im FDM-Prozess.” Jahresmagazin
Kunststofftechnik 1, no. 1 (2017): 108–14.'
ieee: V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten
verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik,
vol. 1, no. 1, pp. 108–114, 2017.
mla: Schöppner, Volker, et al. “Beurteilung Der Schweißnahtfestigkeiten Verschiedener
Kunststoffe Im FDM-Prozess.” Jahresmagazin Kunststofftechnik, vol. 1, no.
1, Institut für Wissenschaftliche Veröffentlichungen, 2017, pp. 108–14.
short: V. Schöppner, C. Schumacher, J. Guntermann, Jahresmagazin Kunststofftechnik
1 (2017) 108–114.
date_created: 2021-05-07T13:23:33Z
date_updated: 2022-01-06T06:55:23Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
intvolume: ' 1'
issue: '1'
language:
- iso: eng
page: 108-114
publication: Jahresmagazin Kunststofftechnik
publication_identifier:
isbn:
- 1618-8357
publisher: Institut für Wissenschaftliche Veröffentlichungen
status: public
title: Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess
type: journal_article
user_id: '70729'
volume: 1
year: '2017'
...
---
_id: '16791'
author:
- first_name: André
full_name: Dietrich, André
last_name: Dietrich
- first_name: Bernard
full_name: Nacke, Bernard
last_name: Nacke
- first_name: Florian
full_name: Pfeifer, Florian
id: '22717'
last_name: Pfeifer
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Investigation of geometrical
discontinuities in blanks for hot sheet metal forming process under the influence
of induction heating. In: ; 2017.'
apa: Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., & Tröster, T. (2017).
Investigation of geometrical discontinuities in blanks for hot sheet metal forming
process under the influence of induction heating. Presented at the 5th International
Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam.
bibtex: '@inproceedings{Dietrich_Nacke_Pfeifer_Marten_Tröster_2017, title={Investigation
of geometrical discontinuities in blanks for hot sheet metal forming process under
the influence of induction heating}, author={Dietrich, André and Nacke, Bernard
and Pfeifer, Florian and Marten, Thorsten and Tröster, Thomas}, year={2017} }'
chicago: Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas
Tröster. “Investigation of Geometrical Discontinuities in Blanks for Hot Sheet
Metal Forming Process under the Influence of Induction Heating,” 2017.
ieee: A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Investigation
of geometrical discontinuities in blanks for hot sheet metal forming process under
the influence of induction heating,” presented at the 5th International Conference
on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam, 2017.
mla: Dietrich, André, et al. Investigation of Geometrical Discontinuities in
Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating.
2017.
short: 'A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.'
conference:
end_date: 2017-06-22
location: Noordwijkerhout/Amsterdam
name: 5th International Conference on Steels in Cars and Trucks
start_date: 2017-06-18
date_created: 2020-04-21T13:31:20Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '149'
- _id: '321'
- _id: '9'
language:
- iso: eng
status: public
title: Investigation of geometrical discontinuities in blanks for hot sheet metal
forming process under the influence of induction heating
type: conference
user_id: '338'
year: '2017'
...
---
_id: '15941'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Kim-Henning
full_name: Sauerland, Kim-Henning
last_name: Sauerland
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Reuter C, Sauerland K-H, Tröster T. Experimental and numerical crushing analysis
of circular CFRP tubes under axial impact loading. Composite Structures.
2017:33-44. doi:10.1016/j.compstruct.2017.04.052
apa: Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Experimental and numerical
crushing analysis of circular CFRP tubes under axial impact loading. Composite
Structures, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052
bibtex: '@article{Reuter_Sauerland_Tröster_2017, title={Experimental and numerical
crushing analysis of circular CFRP tubes under axial impact loading}, DOI={10.1016/j.compstruct.2017.04.052},
journal={Composite Structures}, author={Reuter, Corin and Sauerland, Kim-Henning
and Tröster, Thomas}, year={2017}, pages={33–44} }'
chicago: Reuter, Corin, Kim-Henning Sauerland, and Thomas Tröster. “Experimental
and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.”
Composite Structures, 2017, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052.
ieee: C. Reuter, K.-H. Sauerland, and T. Tröster, “Experimental and numerical crushing
analysis of circular CFRP tubes under axial impact loading,” Composite Structures,
pp. 33–44, 2017.
mla: Reuter, Corin, et al. “Experimental and Numerical Crushing Analysis of Circular
CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, pp.
33–44, doi:10.1016/j.compstruct.2017.04.052.
short: C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
date_created: 2020-02-20T13:23:14Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.compstruct.2017.04.052
language:
- iso: eng
page: 33-44
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Composite Structures
publication_identifier:
issn:
- 0263-8223
publication_status: published
status: public
title: Experimental and numerical crushing analysis of circular CFRP tubes under axial
impact loading
type: journal_article
user_id: '72008'
year: '2017'
...
---
_id: '15942'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Reuter C, Tröster T. Crashworthiness and numerical simulation of hybrid aluminium-CFRP
tubes under axial impact. Thin-Walled Structures. 2017;117:1-9. doi:10.1016/j.tws.2017.03.034
apa: Reuter, C., & Tröster, T. (2017). Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures,
117, 1–9. https://doi.org/10.1016/j.tws.2017.03.034
bibtex: '@article{Reuter_Tröster_2017, title={Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact}, volume={117}, DOI={10.1016/j.tws.2017.03.034},
journal={Thin-Walled Structures}, author={Reuter, Corin and Tröster, Thomas},
year={2017}, pages={1–9} }'
chicago: 'Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures
117 (2017): 1–9. https://doi.org/10.1016/j.tws.2017.03.034.'
ieee: C. Reuter and T. Tröster, “Crashworthiness and numerical simulation of hybrid
aluminium-CFRP tubes under axial impact,” Thin-Walled Structures, vol.
117, pp. 1–9, 2017.
mla: Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures,
vol. 117, 2017, pp. 1–9, doi:10.1016/j.tws.2017.03.034.
short: C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
date_created: 2020-02-20T13:33:08Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2017.03.034
intvolume: ' 117'
language:
- iso: eng
page: 1-9
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under
axial impact
type: journal_article
user_id: '72008'
volume: 117
year: '2017'
...
---
_id: '15944'
author:
- first_name: Jan André
full_name: Striewe, Jan André
id: '29413'
last_name: Striewe
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Kim-Henning
full_name: Sauerland, Kim-Henning
last_name: Sauerland
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Striewe JA, Reuter C, Sauerland K-H, Tröster T. Manufacturing and crashworthiness
of fabric-reinforced thermoplastic composites. Thin-Walled Structures.
2017:501-508. doi:10.1016/j.tws.2017.11.011
apa: Striewe, J. A., Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Manufacturing
and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled
Structures, 501–508. https://doi.org/10.1016/j.tws.2017.11.011
bibtex: '@article{Striewe_Reuter_Sauerland_Tröster_2017, title={Manufacturing and
crashworthiness of fabric-reinforced thermoplastic composites}, DOI={10.1016/j.tws.2017.11.011},
journal={Thin-Walled Structures}, author={Striewe, Jan André and Reuter, Corin
and Sauerland, Kim-Henning and Tröster, Thomas}, year={2017}, pages={501–508}
}'
chicago: Striewe, Jan André, Corin Reuter, Kim-Henning Sauerland, and Thomas Tröster.
“Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.”
Thin-Walled Structures, 2017, 501–8. https://doi.org/10.1016/j.tws.2017.11.011.
ieee: J. A. Striewe, C. Reuter, K.-H. Sauerland, and T. Tröster, “Manufacturing
and crashworthiness of fabric-reinforced thermoplastic composites,” Thin-Walled
Structures, pp. 501–508, 2017.
mla: Striewe, Jan André, et al. “Manufacturing and Crashworthiness of Fabric-Reinforced
Thermoplastic Composites.” Thin-Walled Structures, 2017, pp. 501–08, doi:10.1016/j.tws.2017.11.011.
short: J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures
(2017) 501–508.
date_created: 2020-02-20T14:00:29Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2017.11.011
language:
- iso: eng
page: 501-508
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
type: journal_article
user_id: '29413'
year: '2017'
...
---
_id: '16059'
author:
- first_name: Nathalie
full_name: Weiß-Borkowski, Nathalie
last_name: Weiß-Borkowski
- first_name: Juhne
full_name: Lian, Juhne
last_name: Lian
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Sebastian
full_name: Münstermann, Sebastian
last_name: Münstermann
- first_name: Wolfgang
full_name: Bleck, Wolfgang
last_name: Bleck
citation:
ama: 'Weiß-Borkowski N, Lian J, Marten T, Tröster T, Münstermann S, Bleck W. Forming
limit curves determined in high-speed Nakajima tests and predicted by a strain
rate sensitive model. In: Proceedings of The 20th International ESAFORM Conference
on Material Forming: ESAFORM 2017. ; 2017. doi:10.1063/1.5007961'
apa: 'Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., &
Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests
and predicted by a strain rate sensitive model. In Proceedings of The 20th
International ESAFORM Conference on Material Forming: ESAFORM 2017. https://doi.org/10.1063/1.5007961'
bibtex: '@inproceedings{Weiß-Borkowski_Lian_Marten_Tröster_Münstermann_Bleck_2017,
title={Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model}, DOI={10.1063/1.5007961},
booktitle={Proceedings of The 20th International ESAFORM Conference on Material
Forming: ESAFORM 2017}, author={Weiß-Borkowski, Nathalie and Lian, Juhne and Marten,
Thorsten and Tröster, Thomas and Münstermann, Sebastian and Bleck, Wolfgang},
year={2017} }'
chicago: 'Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster,
Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in
High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” In
Proceedings of The 20th International ESAFORM Conference on Material Forming:
ESAFORM 2017, 2017. https://doi.org/10.1063/1.5007961.'
ieee: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, and W.
Bleck, “Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model,” in Proceedings of The 20th International
ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.'
mla: 'Weiß-Borkowski, Nathalie, et al. “Forming Limit Curves Determined in High-Speed
Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” Proceedings
of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017,
2017, doi:10.1063/1.5007961.'
short: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck,
in: Proceedings of The 20th International ESAFORM Conference on Material Forming:
ESAFORM 2017, 2017.'
date_created: 2020-02-24T16:28:58Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1063/1.5007961
language:
- iso: eng
publication: 'Proceedings of The 20th International ESAFORM Conference on Material
Forming: ESAFORM 2017'
publication_status: published
status: public
title: Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16062'
abstract:
- lang: eng
text: The main objective for an economic and ecological use of raw materials
is the achievement of closed raw material cycles. Because of that, not only the
manufacturing procedures are important during the development of new materials
but also the recycling processes. Within the increased use of lightweight construction
in recent years, the application of multi-material or hybrid structures reach
high significance for the automotive industry. In this development, especially
the carbon fibre reinforced plastics (CFRP) gained its importance. However, currently
there are no recycling strategies available for hybrid structures; complete recycling
processes for CFRP are still expandable. This work presents methods for separation
of hybrid structures made of metal and CFRP, as well as the corresponding process
windows and the boundary conditions. The separation is performed by introduction
of thermal heat and the behaviour of these bonded compounds is analyzed based
on shear tensile tests. The results of these studies are used to develop a complete
recycling process for reclamation of hybrid structures.
author:
- first_name: Swetlana
full_name: Schweizer, Swetlana
id: '8938'
last_name: Schweizer
- first_name: Anna
full_name: Becker-Staines, Anna
last_name: Becker-Staines
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Schweizer S, Becker-Staines A, Tröster T. Separation of Hybrid Structures for
the Reclaim of their Single Components. Key Engineering Materials. 2017:568-575.
doi:10.4028/www.scientific.net/kem.742.568
apa: Schweizer, S., Becker-Staines, A., & Tröster, T. (2017). Separation of
Hybrid Structures for the Reclaim of their Single Components. Key Engineering
Materials, 568–575. https://doi.org/10.4028/www.scientific.net/kem.742.568
bibtex: '@article{Schweizer_Becker-Staines_Tröster_2017, title={Separation of Hybrid
Structures for the Reclaim of their Single Components}, DOI={10.4028/www.scientific.net/kem.742.568},
journal={Key Engineering Materials}, author={Schweizer, Swetlana and Becker-Staines,
Anna and Tröster, Thomas}, year={2017}, pages={568–575} }'
chicago: Schweizer, Swetlana, Anna Becker-Staines, and Thomas Tröster. “Separation
of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering
Materials, 2017, 568–75. https://doi.org/10.4028/www.scientific.net/kem.742.568.
ieee: S. Schweizer, A. Becker-Staines, and T. Tröster, “Separation of Hybrid Structures
for the Reclaim of their Single Components,” Key Engineering Materials,
pp. 568–575, 2017.
mla: Schweizer, Swetlana, et al. “Separation of Hybrid Structures for the Reclaim
of Their Single Components.” Key Engineering Materials, 2017, pp. 568–75,
doi:10.4028/www.scientific.net/kem.742.568.
short: S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017)
568–575.
date_created: 2020-02-24T16:32:21Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.4028/www.scientific.net/kem.742.568
language:
- iso: eng
page: 568-575
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
status: public
title: Separation of Hybrid Structures for the Reclaim of their Single Components
type: journal_article
user_id: '72008'
year: '2017'
...
---
_id: '16063'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Approve of porostiy for increasing process speed in the
laser melting process of Ti6Al4V. In: ; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process
speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Approve of porostiy for increasing
process speed in the laser melting process of Ti6Al4V}, author={Ahlers, Dominik
and Tröster, Thomas}, year={2017} }'
chicago: Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
ieee: D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed
in the laser melting process of Ti6Al4V,” presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
end_date: 2017-08-09
location: Austin, Texas, USA
name: 28th Annual International Solid Freeform Fabrication Symposium 2017
start_date: 2017-08-07
date_created: 2020-02-24T16:34:43Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: eng
status: public
title: Approve of porostiy for increasing process speed in the laser melting process
of Ti6Al4V
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16065'
author:
- first_name: P.
full_name: Kutz, P.
last_name: Kutz
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: M.
full_name: Ellouz, M.
last_name: Ellouz
- first_name: T.
full_name: Kordisch, T.
last_name: Kordisch
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Kutz P, Wang Z, Ellouz M, Kordisch T, Tröster T. Computed Tomography Examination
of Hybrid Components after Dynamic 3-Point Bending Test. In: ; 2017.'
apa: Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., & Tröster, T. (2017). Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test.
Presented at the 2nd Conference & Exhibition on Light Materials, Bremen.
bibtex: '@inproceedings{Kutz_Wang_Ellouz_Kordisch_Tröster_2017, title={Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test},
author={Kutz, P. and Wang, Z. and Ellouz, M. and Kordisch, T. and Tröster, Thomas},
year={2017} }'
chicago: Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,”
2017.
ieee: P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, and T. Tröster, “Computed Tomography
Examination of Hybrid Components after Dynamic 3-Point Bending Test,” presented
at the 2nd Conference & Exhibition on Light Materials, Bremen, 2017.
mla: Kutz, P., et al. Computed Tomography Examination of Hybrid Components after
Dynamic 3-Point Bending Test. 2017.
short: 'P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.'
conference:
end_date: 2017-11-10
location: Bremen
name: 2nd Conference & Exhibition on Light Materials
start_date: 2017-11-08
date_created: 2020-02-24T16:38:15Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Computed Tomography Examination of Hybrid Components after Dynamic 3-Point
Bending Test
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16070'
author:
- first_name: 'Nathalie '
full_name: 'Weiß Borkowski, Nathalie '
last_name: Weiß Borkowski
citation:
ama: Weiß Borkowski N. Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen. Shaker Verlag Band 2017/22; 2017.
apa: Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22.
bibtex: '@book{Weiß Borkowski_2017, title={Analyse des Verformungsverhaltens von
Übergangszonen partiell pressgehärteter Strukturen}, publisher={Shaker Verlag
Band 2017/22}, author={Weiß Borkowski, Nathalie }, year={2017} }'
chicago: Weiß Borkowski, Nathalie . Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
ieee: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
mla: Weiß Borkowski, Nathalie. Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
short: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
date_created: 2020-02-25T10:24:55Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-8440-5013-4
publisher: Shaker Verlag Band 2017/22
status: public
supervisor:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
title: Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter
Strukturen
type: dissertation
user_id: '72008'
year: '2017'
...
---
_id: '16071'
author:
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: P.
full_name: Kutz, P.
last_name: Kutz
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wang Z, Kutz P, Tröster T. Herstellung und computertomographische Untersuchung
von hybriden Strukturen aus Metall und Faserverbundkunststoffen. In: ; 2017.'
apa: Wang, Z., Kutz, P., & Tröster, T. (2017). Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen.
Presented at the 15. Bielefelder Werkstofftag, Bielefeld.
bibtex: '@inproceedings{Wang_Kutz_Tröster_2017, title={Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen},
author={Wang, Z. and Kutz, P. and Tröster, Thomas}, year={2017} }'
chicago: Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,”
2017.
ieee: Z. Wang, P. Kutz, and T. Tröster, “Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,”
presented at the 15. Bielefelder Werkstofftag, Bielefeld, 2017.
mla: Wang, Z., et al. Herstellung und computertomographische Untersuchung von
hybriden Strukturen aus Metall und Faserverbundkunststoffen. 2017.
short: 'Z. Wang, P. Kutz, T. Tröster, in: 2017.'
conference:
location: Bielefeld
name: 15. Bielefelder Werkstofftag
start_date: 06. April 2017
date_created: 2020-02-25T10:30:04Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Herstellung und computertomographische Untersuchung von hybriden Strukturen
aus Metall und Faserverbundkunststoffen
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16072'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
citation:
ama: 'Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate
on the instability in high speed cupping tests – Investigation on dual phase steel
and numerical validation by CRACH. In: ; 2017.'
apa: Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM
Conference, Schloss Hohenkammer.
bibtex: '@inproceedings{Weiß Borkowski_Camberg_Tröster_Marten_2017, title={Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH}, author={Weiß Borkowski,
N. and Camberg, Alan Adam and Tröster, Thomas and Marten, Thorsten}, year={2017}
}'
chicago: Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten.
“Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation
on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
ieee: N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of
strain rate on the instability in high speed cupping tests – Investigation on
dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM
Conference, Schloss Hohenkammer, 2017.
mla: Weiß Borkowski, N., et al. Influence of Strain Rate on the Instability in
High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation
by CRACH. 2017.
short: 'N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.'
conference:
location: Schloss Hohenkammer
name: 4th MATFEM Conference
start_date: 2017-04-25
date_created: 2020-02-25T10:37:14Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influence of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16073'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: A.
full_name: Schulz Beenken, A.
last_name: Schulz Beenken
citation:
ama: 'Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming
Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates.
In: ; 2017.'
apa: Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017).
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates. Presented at the 6th International Conference on Hot
Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
bibtex: '@inproceedings{Weiß Borkowski_Marten_Tröster_Schulz Beenken_2017, title={Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates}, author={Weiß Borkowski, N. and Marten, Thorsten and Tröster,
Thomas and Schulz Beenken, A.}, year={2017} }'
chicago: Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken.
“Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates,” 2017.
ieee: N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates,” presented at the 6th International Conference on Hot Sheet
Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017.
mla: Weiß Borkowski, N., et al. Analysis of the Forming Behaviour of Transition
Areas of Partial Press-Hardened Steel at High Strain-Rates. 2017.
short: 'N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.'
conference:
end_date: 2017-06-07
location: Atlanta, USA
name: 6th International Conference on Hot Sheet Metal Forming of High-Performance
Steel (CHS2 2017)
start_date: 2017-06-04
date_created: 2020-02-25T10:46:26Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication_identifier:
isbn:
- 978-1-935117-66-7
status: public
title: Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16074'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In:
; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive
Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Materialkombinationen in der
additive Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive
Fertigung,” 2017.
ieee: D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,”
presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive
Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Erfurt
name: Rapid.Tech 2017 – Fachforum Luftfahrt
start_date: 2017-06-22
date_created: 2020-02-25T10:52:14Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Materialkombinationen in der additive Fertigung
type: conference
user_id: '11207'
year: '2017'
...