[{"_id":"27649","date_updated":"2022-01-06T06:57:43Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-11-22T07:22:08Z","user_id":"44116","author":[{"last_name":"Meilwes ","full_name":"Meilwes , Peter","first_name":"Peter"}],"title":"Simulation und Modellierung des Druckverlustes industrieller Polymerschmelzefilter in Abhängigkeit verschiedener Prozessbedingungen sowie deren verschmutzung ","language":[{"iso":"eng"}],"type":"dissertation","year":"2019","status":"public","citation":{"short":"P. Meilwes , Simulation Und Modellierung Des Druckverlustes Industrieller Polymerschmelzefilter in Abhängigkeit Verschiedener Prozessbedingungen Sowie Deren Verschmutzung , 2019.","bibtex":"@book{Meilwes _2019, title={Simulation und Modellierung des Druckverlustes industrieller Polymerschmelzefilter in Abhängigkeit verschiedener Prozessbedingungen sowie deren verschmutzung }, author={Meilwes , Peter}, year={2019} }","mla":"Meilwes , Peter. <i>Simulation Und Modellierung Des Druckverlustes Industrieller Polymerschmelzefilter in Abhängigkeit Verschiedener Prozessbedingungen Sowie Deren Verschmutzung </i>. 2019.","apa":"Meilwes , P. (2019). <i>Simulation und Modellierung des Druckverlustes industrieller Polymerschmelzefilter in Abhängigkeit verschiedener Prozessbedingungen sowie deren verschmutzung </i>.","ama":"Meilwes  P. <i>Simulation Und Modellierung Des Druckverlustes Industrieller Polymerschmelzefilter in Abhängigkeit Verschiedener Prozessbedingungen Sowie Deren Verschmutzung </i>.; 2019.","ieee":"P. Meilwes , <i>Simulation und Modellierung des Druckverlustes industrieller Polymerschmelzefilter in Abhängigkeit verschiedener Prozessbedingungen sowie deren verschmutzung </i>. 2019.","chicago":"Meilwes , Peter. <i>Simulation Und Modellierung Des Druckverlustes Industrieller Polymerschmelzefilter in Abhängigkeit Verschiedener Prozessbedingungen Sowie Deren Verschmutzung </i>, 2019."}},{"year":"2019","citation":{"apa":"Landgräber, B. (2019). <i>Experimentelle und modellbasierte Analyse der Prozessphasen des Spritzgießsonderverfahrens GITBlow </i>.","mla":"Landgräber, Björn. <i>Experimentelle Und Modellbasierte Analyse Der Prozessphasen Des Spritzgießsonderverfahrens GITBlow </i>. 2019.","short":"B. Landgräber, Experimentelle Und Modellbasierte Analyse Der Prozessphasen Des Spritzgießsonderverfahrens GITBlow , 2019.","bibtex":"@book{Landgräber_2019, title={Experimentelle und modellbasierte Analyse der Prozessphasen des Spritzgießsonderverfahrens GITBlow }, author={Landgräber, Björn}, year={2019} }","ama":"Landgräber B. <i>Experimentelle Und Modellbasierte Analyse Der Prozessphasen Des Spritzgießsonderverfahrens GITBlow </i>.; 2019.","ieee":"B. Landgräber, <i>Experimentelle und modellbasierte Analyse der Prozessphasen des Spritzgießsonderverfahrens GITBlow </i>. 2019.","chicago":"Landgräber, Björn. <i>Experimentelle Und Modellbasierte Analyse Der Prozessphasen Des Spritzgießsonderverfahrens GITBlow </i>, 2019."},"title":"Experimentelle und modellbasierte Analyse der Prozessphasen des Spritzgießsonderverfahrens GITBlow ","date_updated":"2022-01-06T06:57:43Z","date_created":"2021-11-22T07:26:46Z","author":[{"first_name":"Björn","full_name":"Landgräber, Björn","last_name":"Landgräber"}],"status":"public","type":"dissertation","language":[{"iso":"eng"}],"_id":"27653","user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}]},{"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"44116","_id":"27654","language":[{"iso":"eng"}],"type":"dissertation","status":"public","author":[{"full_name":"Fiebig, Isabel","last_name":"Fiebig","first_name":"Isabel"}],"date_created":"2021-11-22T07:28:32Z","date_updated":"2022-01-06T06:57:43Z","title":"Beitrag zur Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht faserverstärkter Thermoplaste ","citation":{"ama":"Fiebig I. <i>Beitrag Zur Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht Faserverstärkter Thermoplaste </i>.; 2019.","chicago":"Fiebig, Isabel. <i>Beitrag Zur Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht Faserverstärkter Thermoplaste </i>, 2019.","ieee":"I. Fiebig, <i>Beitrag zur Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht faserverstärkter Thermoplaste </i>. 2019.","bibtex":"@book{Fiebig_2019, title={Beitrag zur Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht faserverstärkter Thermoplaste }, author={Fiebig, Isabel}, year={2019} }","mla":"Fiebig, Isabel. <i>Beitrag Zur Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht Faserverstärkter Thermoplaste </i>. 2019.","short":"I. Fiebig, Beitrag Zur Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht Faserverstärkter Thermoplaste , 2019.","apa":"Fiebig, I. (2019). <i>Beitrag zur Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht faserverstärkter Thermoplaste </i>."},"year":"2019"},{"type":"dissertation","status":"public","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"44116","_id":"27655","language":[{"iso":"eng"}],"citation":{"ama":"Nordmeyer T. <i>Verfahrenstechnische Entwicklung Des Direktinjektion-Plasmaverfahrens Im Spritzgießprozess </i>.; 2019.","ieee":"T. Nordmeyer, <i>Verfahrenstechnische Entwicklung des Direktinjektion-Plasmaverfahrens im Spritzgießprozess </i>. 2019.","chicago":"Nordmeyer, Timo . <i>Verfahrenstechnische Entwicklung Des Direktinjektion-Plasmaverfahrens Im Spritzgießprozess </i>, 2019.","apa":"Nordmeyer, T. (2019). <i>Verfahrenstechnische Entwicklung des Direktinjektion-Plasmaverfahrens im Spritzgießprozess </i>.","mla":"Nordmeyer, Timo. <i>Verfahrenstechnische Entwicklung Des Direktinjektion-Plasmaverfahrens Im Spritzgießprozess </i>. 2019.","bibtex":"@book{Nordmeyer_2019, title={Verfahrenstechnische Entwicklung des Direktinjektion-Plasmaverfahrens im Spritzgießprozess }, author={Nordmeyer, Timo }, year={2019} }","short":"T. Nordmeyer, Verfahrenstechnische Entwicklung Des Direktinjektion-Plasmaverfahrens Im Spritzgießprozess , 2019."},"year":"2019","date_created":"2021-11-22T07:29:31Z","author":[{"first_name":"Timo ","full_name":"Nordmeyer, Timo ","last_name":"Nordmeyer"}],"date_updated":"2022-01-06T06:57:43Z","title":"Verfahrenstechnische Entwicklung des Direktinjektion-Plasmaverfahrens im Spritzgießprozess "},{"title":"Adhesive bonding of FDM-manufactured parts made of ULTEM 9085 considering surface treatment, surface structure, and joint design","doi":"10.1007/s40194-019-00810-4","date_updated":"2022-01-06T06:56:01Z","date_created":"2021-09-07T10:03:20Z","author":[{"full_name":"Bürenhaus, Franziska Isabelle","id":"41055","last_name":"Bürenhaus","first_name":"Franziska Isabelle"},{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"first_name":"André","id":"27599","full_name":"Hirsch, André","last_name":"Hirsch"}],"year":"2019","page":"1819-1832","citation":{"ieee":"F. I. Bürenhaus, E. Moritzer, and A. Hirsch, “Adhesive bonding of FDM-manufactured parts made of ULTEM 9085 considering surface treatment, surface structure, and joint design,” <i>Welding in the World</i>, pp. 1819–1832, 2019.","chicago":"Bürenhaus, Franziska Isabelle, Elmar Moritzer, and André Hirsch. “Adhesive Bonding of FDM-Manufactured Parts Made of ULTEM 9085 Considering Surface Treatment, Surface Structure, and Joint Design.” <i>Welding in the World</i>, 2019, 1819–32. <a href=\"https://doi.org/10.1007/s40194-019-00810-4\">https://doi.org/10.1007/s40194-019-00810-4</a>.","ama":"Bürenhaus FI, Moritzer E, Hirsch A. Adhesive bonding of FDM-manufactured parts made of ULTEM 9085 considering surface treatment, surface structure, and joint design. <i>Welding in the World</i>. 2019:1819-1832. doi:<a href=\"https://doi.org/10.1007/s40194-019-00810-4\">10.1007/s40194-019-00810-4</a>","apa":"Bürenhaus, F. I., Moritzer, E., &#38; Hirsch, A. (2019). Adhesive bonding of FDM-manufactured parts made of ULTEM 9085 considering surface treatment, surface structure, and joint design. <i>Welding in the World</i>, 1819–1832. <a href=\"https://doi.org/10.1007/s40194-019-00810-4\">https://doi.org/10.1007/s40194-019-00810-4</a>","mla":"Bürenhaus, Franziska Isabelle, et al. “Adhesive Bonding of FDM-Manufactured Parts Made of ULTEM 9085 Considering Surface Treatment, Surface Structure, and Joint Design.” <i>Welding in the World</i>, 2019, pp. 1819–32, doi:<a href=\"https://doi.org/10.1007/s40194-019-00810-4\">10.1007/s40194-019-00810-4</a>.","short":"F.I. Bürenhaus, E. Moritzer, A. Hirsch, Welding in the World (2019) 1819–1832.","bibtex":"@article{Bürenhaus_Moritzer_Hirsch_2019, title={Adhesive bonding of FDM-manufactured parts made of ULTEM 9085 considering surface treatment, surface structure, and joint design}, DOI={<a href=\"https://doi.org/10.1007/s40194-019-00810-4\">10.1007/s40194-019-00810-4</a>}, journal={Welding in the World}, author={Bürenhaus, Franziska Isabelle and Moritzer, Elmar and Hirsch, André}, year={2019}, pages={1819–1832} }"},"publication_identifier":{"issn":["0043-2288","1878-6669"]},"publication_status":"published","language":[{"iso":"eng"}],"_id":"23844","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"41055","status":"public","publication":"Welding in the World","type":"journal_article"},{"issue":"2","year":"2019","date_created":"2021-09-07T10:07:17Z","title":"Advancing into New Dimensions","publication":"Kunststoffe internationl","external_id":{"pmid":["34046327"]},"publication_date":"2019-03-01","language":[{"iso":"eng"}],"publication_identifier":{"issn":["1862-4243"]},"pmid":"1","page":"48-52","intvolume":"       109","citation":{"ieee":"E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Advancing into New Dimensions,” <i>Kunststoffe internationl</i>, vol. 109, no. 2, pp. 48–52, 2019.","chicago":"Moritzer, Elmar, Franziska Isabelle Bürenhaus, and André Hirsch. “Advancing into New Dimensions.” <i>Kunststoffe Internationl</i>, 2019.","ama":"Moritzer E, Bürenhaus FI, Hirsch A. Advancing into New Dimensions. <i>Kunststoffe internationl</i>. 2019:48-52.","bibtex":"@article{Moritzer_Bürenhaus_Hirsch_2019, title={Advancing into New Dimensions}, volume={109}, number={2}, journal={Kunststoffe internationl}, author={Moritzer, Elmar and Bürenhaus, Franziska Isabelle and Hirsch, André}, year={2019}, pages={48–52} }","short":"E. Moritzer, F.I. Bürenhaus, A. Hirsch, Kunststoffe Internationl 109 (2019) 48–52.","mla":"Moritzer, Elmar, et al. “Advancing into New Dimensions.” <i>Kunststoffe Internationl</i>, vol. 109, no. 2, 2019, pp. 48–52.","apa":"Moritzer, E., Bürenhaus, F. I., &#38; Hirsch, A. (2019). Advancing into New Dimensions. <i>Kunststoffe Internationl</i>, pp. 48–52."},"date_updated":"2022-01-06T06:56:01Z","volume":109,"author":[{"last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531","first_name":"Elmar"},{"full_name":"Bürenhaus, Franziska Isabelle","id":"41055","last_name":"Bürenhaus","first_name":"Franziska Isabelle"},{"first_name":"André","last_name":"Hirsch","id":"27599","full_name":"Hirsch, André"}],"type":"newspaper_article","status":"public","_id":"23845","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"41055"},{"date_updated":"2022-01-06T06:56:01Z","volume":109,"date_created":"2021-09-07T10:17:26Z","author":[{"id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer","first_name":"Elmar"},{"full_name":"Bürenhaus, Franziska Isabelle","id":"41055","last_name":"Bürenhaus","first_name":"Franziska Isabelle"},{"id":"27599","full_name":"Hirsch, André","last_name":"Hirsch","first_name":"André"}],"title":"Vorstoß in neue Dimensionen","publication_identifier":{"unknown":["0023-5563"]},"issue":"2","year":"2019","page":"68-72","intvolume":"       109","citation":{"bibtex":"@article{Moritzer_Bürenhaus_Hirsch_2019, title={Vorstoß in neue Dimensionen}, volume={109}, number={2}, journal={Kunststoffe}, author={Moritzer, Elmar and Bürenhaus, Franziska Isabelle and Hirsch, André}, year={2019}, pages={68–72} }","mla":"Moritzer, Elmar, et al. “Vorstoß in neue Dimensionen.” <i>Kunststoffe</i>, vol. 109, no. 2, 2019, pp. 68–72.","short":"E. Moritzer, F.I. Bürenhaus, A. Hirsch, Kunststoffe 109 (2019) 68–72.","apa":"Moritzer, E., Bürenhaus, F. I., &#38; Hirsch, A. (2019). Vorstoß in neue Dimensionen. <i>Kunststoffe</i>, pp. 68–72.","chicago":"Moritzer, Elmar, Franziska Isabelle Bürenhaus, and André Hirsch. “Vorstoß in neue Dimensionen.” <i>Kunststoffe</i>, 2019.","ieee":"E. Moritzer, F. I. Bürenhaus, and A. Hirsch, “Vorstoß in neue Dimensionen,” <i>Kunststoffe</i>, vol. 109, no. 2, pp. 68–72, 2019.","ama":"Moritzer E, Bürenhaus FI, Hirsch A. Vorstoß in neue Dimensionen. <i>Kunststoffe</i>. 2019:68-72."},"_id":"23850","publication_date":"2019-02-01","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"41055","language":[{"iso":"ger"}],"publication":"Kunststoffe","type":"newspaper_article","status":"public"},{"date_created":"2021-09-07T11:28:49Z","author":[{"first_name":"Volker","full_name":"Schöppner, Volker","id":"20530","last_name":"Schöppner"},{"id":"72920","full_name":"Brüning, Florian","last_name":"Brüning","first_name":"Florian"}],"date_updated":"2022-01-06T06:56:02Z","title":"Simulation der Feststoffförderung im Einzug von Einschneckenextrudern","publication_identifier":{"issn":["1618-8357"]},"citation":{"short":"V. Schöppner, F. Brüning, WAK Jahresmagazin (2019).","mla":"Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einzug von Einschneckenextrudern.” <i>WAK Jahresmagazin</i>, 2019.","bibtex":"@article{Schöppner_Brüning_2019, title={Simulation der Feststoffförderung im Einzug von Einschneckenextrudern}, journal={WAK Jahresmagazin}, author={Schöppner, Volker and Brüning, Florian}, year={2019} }","apa":"Schöppner, V., &#38; Brüning, F. (2019). Simulation der Feststoffförderung im Einzug von Einschneckenextrudern. <i>WAK Jahresmagazin</i>.","ieee":"V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einzug von Einschneckenextrudern,” <i>WAK Jahresmagazin</i>, 2019.","chicago":"Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einzug von Einschneckenextrudern.” <i>WAK Jahresmagazin</i>, 2019.","ama":"Schöppner V, Brüning F. Simulation der Feststoffförderung im Einzug von Einschneckenextrudern. <i>WAK Jahresmagazin</i>. Published online 2019."},"year":"2019","department":[{"_id":"9"},{"_id":"367"}],"user_id":"72920","_id":"23866","language":[{"iso":"eng"}],"publication":"WAK Jahresmagazin","type":"journal_article","status":"public"},{"type":"conference","status":"public","_id":"23879","user_id":"32297","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-3-939382-14-0 "]},"year":"2019","citation":{"ama":"Albrecht M, Gehde M, Bialaschik M, Schöppner V. Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen. In: ; 2019.","chicago":"Albrecht, Mirko, Michael Gehde, Max Bialaschik, and Volker Schöppner. “Einfluss Des Werkzeugdesignes Auf Das Erwärmverhalten Beim Warmgasschweißen,” 2019.","ieee":"M. Albrecht, M. Gehde, M. Bialaschik, and V. Schöppner, “Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen,” presented at the Technomer 2019 - 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz, 2019.","apa":"Albrecht, M., Gehde, M., Bialaschik, M., &#38; Schöppner, V. (2019). <i>Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen</i>. Technomer 2019 - 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz.","short":"M. Albrecht, M. Gehde, M. Bialaschik, V. Schöppner, in: 2019.","bibtex":"@inproceedings{Albrecht_Gehde_Bialaschik_Schöppner_2019, title={Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen}, author={Albrecht, Mirko and Gehde, Michael and Bialaschik, Max and Schöppner, Volker}, year={2019} }","mla":"Albrecht, Mirko, et al. <i>Einfluss Des Werkzeugdesignes Auf Das Erwärmverhalten Beim Warmgasschweißen</i>. 2019."},"date_updated":"2022-01-06T06:56:02Z","date_created":"2021-09-07T12:14:42Z","author":[{"first_name":"Mirko","full_name":"Albrecht, Mirko","last_name":"Albrecht"},{"first_name":"Michael","last_name":"Gehde","full_name":"Gehde, Michael"},{"id":"32297","full_name":"Bialaschik, Max","last_name":"Bialaschik","first_name":"Max"},{"first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530"}],"title":"Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen","conference":{"name":"Technomer 2019 - 26. Fachtagung über Verarbeitung und Anwendung von Polymeren","location":"Chemnitz"}},{"language":[{"iso":"eng"}],"_id":"22022","user_id":"70729","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"abstract":[{"text":"Due to the great popularity of the Fused Deposition Modeling (FDM) process, the material market is growing. In particular, processing of high-temperature materials such as PEEK is demanding. The aim of the investigations is to test different PEEK materials regarding their processability in the FDM process. An unreinforced PEEK, a thermally conductive PEEK as well as a carbon fiber reinforced PEEK are investigated. The processability is assessed with the help of the weld seam strength. The assessment of the weld seam strength is carried out by building tests. For this purpose, a special method developed at the DMRC is used. In addition, a welding width factor between the strands deposited on each other is calculated and compared. Finally, a welding factor is determined to enable the comparison between the different materials. With this procedure, the influence of varying nozzle and build chamber temperatures on the achievable weld seam strengths is evaluated.","lang":"eng"}],"status":"public","type":"conference","publication":"30th Annual International Solid Freeform Fabrication Symposium","title":"Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength","doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf","date_updated":"2022-01-06T06:55:22Z","date_created":"2021-05-07T13:23:01Z","author":[{"first_name":"Elmar","id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer"},{"full_name":"Wächter, Julian","id":"29588","last_name":"Wächter","first_name":"Julian"},{"full_name":"Elsner, M.","last_name":"Elsner","first_name":"M."}],"volume":30,"year":"2019","citation":{"apa":"Moritzer, E., Wächter, J., &#38; Elsner, M. (2019). Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength. <i>30th Annual International Solid Freeform Fabrication Symposium</i>, <i>30</i>, 856–863. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf</a>","bibtex":"@inproceedings{Moritzer_Wächter_Elsner_2019, title={Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength}, volume={30}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf</a>}, booktitle={30th Annual International Solid Freeform Fabrication Symposium}, author={Moritzer, Elmar and Wächter, Julian and Elsner, M.}, year={2019}, pages={856–863} }","mla":"Moritzer, Elmar, et al. “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength.” <i>30th Annual International Solid Freeform Fabrication Symposium</i>, vol. 30, 2019, pp. 856–63, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf</a>.","short":"E. Moritzer, J. Wächter, M. Elsner, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 856–863.","ama":"Moritzer E, Wächter J, Elsner M. Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength. In: <i>30th Annual International Solid Freeform Fabrication Symposium</i>. Vol 30. ; 2019:856-863. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf</a>","chicago":"Moritzer, Elmar, Julian Wächter, and M. Elsner. “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength.” In <i>30th Annual International Solid Freeform Fabrication Symposium</i>, 30:856–63, 2019. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf</a>.","ieee":"E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,” in <i>30th Annual International Solid Freeform Fabrication Symposium</i>, 2019, vol. 30, pp. 856–863, doi: <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf</a>."},"intvolume":"        30","page":"856-863"},{"abstract":[{"lang":"eng","text":"Plastic freeforming (PF) is an additive-manufacturing process for producing three-dimensional plastic parts based on 3D CAD data by applying plastic droplets in layers. This process is used to produce customer-specific and complex geometries (prototypes and small series) on organic sheets. A comparable serial process is the injection of a second component onto organic sheets by injection molding. A sufficient bond between the PF structure and the organic sheets is of particular importance for each application. If this is not guaranteed, the composite system cannot withstand the mechanical load and fails. The force exerted on the system can no longer be transmitted between the PF structure and the organic sheet. The organic sheet is made of glass fiber-reinforced polypropylene (PP). The connection between the organic sheet and the PF structure is achieved by welding the molten polymer droplets and the surface of the organic sheet. The PF structures are made of PP to ensure sufficient compatibility with regard to the weldability of the components. The processing of PP in the PF process is a challenge because PP is a semicrystalline material. The shrinkage of semi-crystalline materials is significantly higher compared to amorphous materials. Due to the layered structure of the components, the shrinkage of the individual layers results in undesired warpage. The adhesive strength between the organic sheet and the PF structure is investigated by determining the bending strength in the 3-point bending test. The investigations include an optimization of the process parameters to maximize the adhesive strength. The experimental investigations show that an increase of the nozzle and build chamber temperature leads to a higher adhesive strength. In further investigations, the temperature of the nozzle shows no significant influence on the surface temperature despite the expected heat radiation. The surface temperature is almost only dependent on the temperature of the build chamber."}],"status":"public","type":"journal_article","publication":"Welding in the World","language":[{"iso":"eng"}],"_id":"22047","user_id":"70729","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"year":"2019","citation":{"ama":"Moritzer E, Hirsch A, Heim HP, Cherif C, Truemper W. Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. <i>Welding in the World</i>. 2019;63:867-873. doi:<a href=\"https://doi.org/10.1007/s40194-019-00714-3\">10.1007/s40194-019-00714-3</a>","ieee":"E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” <i>Welding in the World</i>, vol. 63, pp. 867–873, 2019, doi: <a href=\"https://doi.org/10.1007/s40194-019-00714-3\">10.1007/s40194-019-00714-3</a>.","chicago":"Moritzer, Elmar, André Hirsch, H.P. Heim, C. Cherif, and W. Truemper. “Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.” <i>Welding in the World</i> 63 (2019): 867–73. <a href=\"https://doi.org/10.1007/s40194-019-00714-3\">https://doi.org/10.1007/s40194-019-00714-3</a>.","short":"E. Moritzer, A. Hirsch, H.P. Heim, C. Cherif, W. Truemper, Welding in the World 63 (2019) 867–873.","mla":"Moritzer, Elmar, et al. “Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.” <i>Welding in the World</i>, vol. 63, Springer, 2019, pp. 867–73, doi:<a href=\"https://doi.org/10.1007/s40194-019-00714-3\">10.1007/s40194-019-00714-3</a>.","bibtex":"@article{Moritzer_Hirsch_Heim_Cherif_Truemper_2019, title={Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites}, volume={63}, DOI={<a href=\"https://doi.org/10.1007/s40194-019-00714-3\">10.1007/s40194-019-00714-3</a>}, journal={Welding in the World}, publisher={Springer}, author={Moritzer, Elmar and Hirsch, André and Heim, H.P. and Cherif, C. and Truemper, W.}, year={2019}, pages={867–873} }","apa":"Moritzer, E., Hirsch, A., Heim, H. P., Cherif, C., &#38; Truemper, W. (2019). Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. <i>Welding in the World</i>, <i>63</i>, 867–873. <a href=\"https://doi.org/10.1007/s40194-019-00714-3\">https://doi.org/10.1007/s40194-019-00714-3</a>"},"page":"867-873","intvolume":"        63","quality_controlled":"1","title":"Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites","doi":"10.1007/s40194-019-00714-3","date_updated":"2022-04-25T08:01:09Z","publisher":"Springer","date_created":"2021-05-07T13:23:30Z","author":[{"full_name":"Moritzer, Elmar","id":"20531","last_name":"Moritzer","first_name":"Elmar"},{"last_name":"Hirsch","id":"27599","full_name":"Hirsch, André","first_name":"André"},{"last_name":"Heim","full_name":"Heim, H.P.","first_name":"H.P."},{"full_name":"Cherif, C.","last_name":"Cherif","first_name":"C."},{"first_name":"W.","full_name":"Truemper, W.","last_name":"Truemper"}],"volume":63},{"type":"conference","publication":"AIP Conference Proceedings","status":"public","abstract":[{"text":"The mechanical properties of thin-walled plastic components are limited. One approach to improve the strength or stiffness of these components is to reinforce the thin-walled areas with an individually adapted Fused Deposition Modeling structure. Fused Deposition Modeling (FDM) is one of the most commonly used additive manufacturing processes. This process is characterized by the deposition of a fused, thermoplastic filament. Depending on the form of the reinforcement structure, the resulting hybrid structure should show higher strength or stiffness. The objective of the project is to determine constructive design and process guidelines for FDM structures. The FDM structure is to be used as a partial reinforcement for lightweight components and be adapted to the respective load conditions. Because of the lightweight application, the FDM structure should also have the lowest possible weight. The optimization of the FDM parts for different load cases is realized by adapting the design parameters. These parameters influence the layer generation and therefore also the inner structure of the FDM parts. In preliminary studies, the manufacturing restrictions of the FDM process are defined. The specimens are manufactured based on the Design of Experiments. To determine the static strength properties, different tests (tensile, compression, flexural, torsion and impact) are carried out. The investigations show that the filling strategy affects the mechanical properties. As a result of the investigations, design and process guidelines for the FDM structures are established according to the load conditions.","lang":"eng"}],"user_id":"70729","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"_id":"22028","language":[{"iso":"eng"}],"issue":"1","quality_controlled":"1","citation":{"ama":"Moritzer E, Hirsch A, Bürenhaus FI. Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures. In: <i>AIP Conference Proceedings</i>. Vol 2065. AIP Publishing; 2019. doi:<a href=\"https://doi.org/10.1063/1.5088314\">10.1063/1.5088314</a>","chicago":"Moritzer, Elmar, André Hirsch, and Franziska Isabelle Bürenhaus. “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures.” In <i>AIP Conference Proceedings</i>, Vol. 2065. AIP Publishing, 2019. <a href=\"https://doi.org/10.1063/1.5088314\">https://doi.org/10.1063/1.5088314</a>.","ieee":"E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures,” in <i>AIP Conference Proceedings</i>, 2019, vol. 2065, no. 1, doi: <a href=\"https://doi.org/10.1063/1.5088314\">10.1063/1.5088314</a>.","bibtex":"@inproceedings{Moritzer_Hirsch_Bürenhaus_2019, title={Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures}, volume={2065}, DOI={<a href=\"https://doi.org/10.1063/1.5088314\">10.1063/1.5088314</a>}, number={1}, booktitle={AIP Conference Proceedings}, publisher={AIP Publishing}, author={Moritzer, Elmar and Hirsch, André and Bürenhaus, Franziska Isabelle}, year={2019} }","short":"E. Moritzer, A. Hirsch, F.I. Bürenhaus, in: AIP Conference Proceedings, AIP Publishing, 2019.","mla":"Moritzer, Elmar, et al. “Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures.” <i>AIP Conference Proceedings</i>, vol. 2065, no. 1, AIP Publishing, 2019, doi:<a href=\"https://doi.org/10.1063/1.5088314\">10.1063/1.5088314</a>.","apa":"Moritzer, E., Hirsch, A., &#38; Bürenhaus, F. I. (2019). Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures. <i>AIP Conference Proceedings</i>, <i>2065</i>(1). <a href=\"https://doi.org/10.1063/1.5088314\">https://doi.org/10.1063/1.5088314</a>"},"intvolume":"      2065","year":"2019","author":[{"last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531","first_name":"Elmar"},{"last_name":"Hirsch","id":"27599","full_name":"Hirsch, André","first_name":"André"},{"last_name":"Bürenhaus","full_name":"Bürenhaus, Franziska Isabelle","id":"41055","first_name":"Franziska Isabelle"}],"date_created":"2021-05-07T13:23:08Z","volume":2065,"publisher":"AIP Publishing","date_updated":"2022-04-25T08:00:20Z","doi":"10.1063/1.5088314","title":"Development and Modeling of Design and Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid Structures"},{"language":[{"iso":"eng"}],"department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"user_id":"70729","_id":"22027","status":"public","abstract":[{"lang":"eng","text":"Additive manufacturing processes, like the Fused Deposition Modeling (FDM) process, do not need product-specific tools and create parts directly from the CAD data. In the FDM process, the semi-finished product, a wire of a thermoplastic polymer, is melted and forced through a nozzle. The continuous positioning of this nozzle allows the polymer to weld together strand by strand and layer by layer to produce a component. Because no mold is used in the FDM process, no holding pressure can be generated as in injection molding processes, in which the holding pressure is used to minimize the shrinkage and warpage of the part. In the FDM process, the part is generated in an ambient pressure environment. Each strand cools down and shrinks separately. This causes residual stresses in the part that can lead to major warpage and a complete stoppage of the process. This is the main reason why the material selection in the FDM process is restricted in comparison to conventional polymer processing technologies. In this paper, the warpage of different polymers is quantified as a criterion for evaluating the processability of polymers in the FDM process. Due to the process principle, the part properties in the FDM process are mainly influenced by the machine quality and the data processing, so that it is difficult to test a material for FDM independently of the machine and the data processing. Considering these influences, a custom-built specimen is created to test and quantify the warpage of different types of blended and reinforced polyamide 6. Considering the experimentally investigated warpage, the materials can be evaluated and the warpage can be related to the shrinkage investigated in pvT measurements. This procedure allows the machine- and process-independent rating of the processability in terms of warpage for different materials. Alongside other criteria, this is a necessary step to develop new materials with good processability in the FDM process."}],"publication":"AIP Conference Proceedings","type":"conference","doi":"10.1063/1.5088315","title":"A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process","author":[{"last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530","first_name":"Volker"},{"full_name":"Schumacher, C.","last_name":"Schumacher","first_name":"C."},{"full_name":"Fels, C.","last_name":"Fels","first_name":"C."}],"date_created":"2021-05-07T13:23:07Z","date_updated":"2022-04-25T08:00:04Z","publisher":"AIP Publishing","citation":{"ama":"Schöppner V, Schumacher C, Fels C. A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process. In: <i>AIP Conference Proceedings</i>. AIP Publishing; 2019. doi:<a href=\"https://doi.org/10.1063/1.5088315\">10.1063/1.5088315</a>","ieee":"V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: <a href=\"https://doi.org/10.1063/1.5088315\">10.1063/1.5088315</a>.","chicago":"Schöppner, Volker, C. Schumacher, and C. Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.” In <i>AIP Conference Proceedings</i>. AIP Publishing, 2019. <a href=\"https://doi.org/10.1063/1.5088315\">https://doi.org/10.1063/1.5088315</a>.","mla":"Schöppner, Volker, et al. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.” <i>AIP Conference Proceedings</i>, AIP Publishing, 2019, doi:<a href=\"https://doi.org/10.1063/1.5088315\">10.1063/1.5088315</a>.","short":"V. Schöppner, C. Schumacher, C. Fels, in: AIP Conference Proceedings, AIP Publishing, 2019.","bibtex":"@inproceedings{Schöppner_Schumacher_Fels_2019, title={A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process}, DOI={<a href=\"https://doi.org/10.1063/1.5088315\">10.1063/1.5088315</a>}, booktitle={AIP Conference Proceedings}, publisher={AIP Publishing}, author={Schöppner, Volker and Schumacher, C. and Fels, C.}, year={2019} }","apa":"Schöppner, V., Schumacher, C., &#38; Fels, C. (2019). A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process. <i>AIP Conference Proceedings</i>. <a href=\"https://doi.org/10.1063/1.5088315\">https://doi.org/10.1063/1.5088315</a>"},"year":"2019","quality_controlled":"1"},{"citation":{"chicago":"Moritzer, Elmar, André Hirsch, and S. Paulus. <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung</i>. Springer Vieweg, 2019. <a href=\"https://doi.org/10.1007/978-3-658-27412-2\">https://doi.org/10.1007/978-3-658-27412-2</a>.","ieee":"E. Moritzer, A. Hirsch, and S. Paulus, <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung</i>. Springer Vieweg, 2019, pp. 185–198.","ama":"Moritzer E, Hirsch A, Paulus S. <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung</i>. Springer Vieweg; 2019:185-198. doi:<a href=\"https://doi.org/10.1007/978-3-658-27412-2\">10.1007/978-3-658-27412-2</a>","mla":"Moritzer, Elmar, et al. <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung</i>. Springer Vieweg, 2019, pp. 185–98, doi:<a href=\"https://doi.org/10.1007/978-3-658-27412-2\">10.1007/978-3-658-27412-2</a>.","short":"E. Moritzer, A. Hirsch, S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung, Springer Vieweg, 2019.","bibtex":"@book{Moritzer_Hirsch_Paulus_2019, title={Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung}, DOI={<a href=\"https://doi.org/10.1007/978-3-658-27412-2\">10.1007/978-3-658-27412-2</a>}, publisher={Springer Vieweg}, author={Moritzer, Elmar and Hirsch, André and Paulus, S.}, year={2019}, pages={185–198} }","apa":"Moritzer, E., Hirsch, A., &#38; Paulus, S. (2019). <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung</i> (pp. 185–198). Springer Vieweg. <a href=\"https://doi.org/10.1007/978-3-658-27412-2\">https://doi.org/10.1007/978-3-658-27412-2</a>"},"page":"185-198","year":"2019","quality_controlled":"1","publication_identifier":{"isbn":["978-3-658-27411-5"]},"doi":"10.1007/978-3-658-27412-2","title":"Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung","date_created":"2021-05-07T13:23:06Z","author":[{"full_name":"Moritzer, Elmar","id":"20531","last_name":"Moritzer","first_name":"Elmar"},{"first_name":"André","last_name":"Hirsch","full_name":"Hirsch, André","id":"27599"},{"last_name":"Paulus","full_name":"Paulus, S.","first_name":"S."}],"publisher":"Springer Vieweg","date_updated":"2022-04-25T07:59:34Z","status":"public","abstract":[{"text":"Das Fused Deposition Modeling (FDM) ist ein etabliertes additives Fertigungsverfahren zur Her-stellung von thermoplastischen Kunststoffbauteilen. In dem vorliegenden Beitrag sind FDM-Verstärkungsstrukturen aus dem Material Ultem 9085 dynamischen Langzeituntersuchungen un-terzogen worden. Dabei wurde die innere Struktur der Probekörper über eine Parametervariation verändert, sodass anschließend die signifikanten Einflussfaktoren auf die Langzeitfestigkeit un-ter dynamischer Belastung identifiziert und analysiert werden konnten. Mit dieser Vorgehens-weise sollte gleichzeitig eine Optimierung der FDM-Verstärkungsstrukturen hinsichtlich der dy-namischen Langzeiteigenschaften bei Biege- und Druckbelastungen vorgenommen werden. Des Weiteren sind anhand der Probekörper die auftretenden Bruch- und Rissausbreitungsmechanis-men analysiert worden. Anhand der ermittelten Wöhlerkurven kann die Lebensdauer unter dy-namischer Belastung abgeschätzt werden. Außerdem zeigen die Untersuchungen, dass Fehlstel-len durch eine hohe Strangbreite und Überfüllungen im Bauteil für Schwachstellen in den FDM-Verstärkungsstrukturen sorgen, an denen Risse bei Druckbelastung entstanden sind und sich dadurch schneller ausbreiten konnten.","lang":"eng"}],"type":"book","language":[{"iso":"eng"}],"user_id":"70729","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"_id":"22026"},{"title":"Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components","doi":"http://dx.doi.org/10.26153/tsw/17308","date_updated":"2024-01-15T12:01:40Z","date_created":"2021-05-07T13:23:23Z","author":[{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"first_name":"André","last_name":"Hirsch","full_name":"Hirsch, André","id":"27599"},{"first_name":"Felix","full_name":"Hecker, Felix","id":"45537","last_name":"Hecker"}],"volume":30,"year":"2019","citation":{"chicago":"Moritzer, Elmar, André Hirsch, and Felix Hecker. “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.” In <i>30th Annual International Solid Freeform Fabrication Symposium</i>, 30:705–14, 2019. <a href=\"http://dx.doi.org/10.26153/tsw/17308\">http://dx.doi.org/10.26153/tsw/17308</a>.","ieee":"E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in <i>30th Annual International Solid Freeform Fabrication Symposium</i>, 2019, vol. 30, pp. 705–714, doi: <a href=\"http://dx.doi.org/10.26153/tsw/17308\">http://dx.doi.org/10.26153/tsw/17308</a>.","ama":"Moritzer E, Hirsch A, Hecker F. Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components. In: <i>30th Annual International Solid Freeform Fabrication Symposium</i>. Vol 30. ; 2019:705-714. doi:<a href=\"http://dx.doi.org/10.26153/tsw/17308\">http://dx.doi.org/10.26153/tsw/17308</a>","apa":"Moritzer, E., Hirsch, A., &#38; Hecker, F. (2019). Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components. <i>30th Annual International Solid Freeform Fabrication Symposium</i>, <i>30</i>, 705–714. <a href=\"http://dx.doi.org/10.26153/tsw/17308\">http://dx.doi.org/10.26153/tsw/17308</a>","bibtex":"@inproceedings{Moritzer_Hirsch_Hecker_2019, title={Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components}, volume={30}, DOI={<a href=\"http://dx.doi.org/10.26153/tsw/17308\">http://dx.doi.org/10.26153/tsw/17308</a>}, booktitle={30th Annual International Solid Freeform Fabrication Symposium}, author={Moritzer, Elmar and Hirsch, André and Hecker, Felix}, year={2019}, pages={705–714} }","mla":"Moritzer, Elmar, et al. “Process Parameter Optimization to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.” <i>30th Annual International Solid Freeform Fabrication Symposium</i>, vol. 30, 2019, pp. 705–14, doi:<a href=\"http://dx.doi.org/10.26153/tsw/17308\">http://dx.doi.org/10.26153/tsw/17308</a>.","short":"E. Moritzer, A. Hirsch, F. Hecker, in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp. 705–714."},"page":"705-714","intvolume":"        30","language":[{"iso":"eng"}],"_id":"22041","user_id":"45537","department":[{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"321"},{"_id":"9"}],"abstract":[{"text":"The Arburg Plastic Freeforming (APF) is an additive manufacturing process that allows three-dimensional, thermoplastic components to be produced in layer by layer. The components are generated by depositing fine, molten plastic droplets. One of the main advantages of the APF process is the open machine control. Thus, the process parameters can be adapted and optimized for the individual applications. The optimization is carried out on the basis of a variation of the process parameters using a statistical design of experiments. Relevant process parameters are the layer thickness, the form factor, the raster and delta angle as well as the overlap between the contour and the filling of a layer. In addition, the nozzle and build chamber temperatures are varied. Using this procedure, the effects of the influencing parameters on the mechanical properties and the interactions between the influencing parameters are analyzed and converted into mathematical models. On the basis of the results and the models, guidelines will be developed to assist the user of APF technology in the systematic process configuration for their own applications. The material used is ABS, one of the most frequently used amorphous thermoplastics in additive manufacturing. The mechanical properties are determined on the basis of tensile tests and the characteristic values tensile strength, elongation at break and Young's modulus. The results should show the performance of the APF technology in regard to the mechanical properties.","lang":"eng"}],"status":"public","type":"conference","publication":"30th Annual International Solid Freeform Fabrication Symposium"},{"type":"dissertation","status":"public","citation":{"apa":"Gehring, A. (2019). <i>Untersuchungen zum energetischen Verhalten von Kunststoffverarbeitungsprozessen auch im Rahmen von Energiemanagementsystemen</i>.","mla":"Gehring, Andreas. <i>Untersuchungen Zum Energetischen Verhalten von Kunststoffverarbeitungsprozessen Auch Im Rahmen von Energiemanagementsystemen</i>. 2019.","bibtex":"@book{Gehring_2019, title={Untersuchungen zum energetischen Verhalten von Kunststoffverarbeitungsprozessen auch im Rahmen von Energiemanagementsystemen}, author={Gehring, Andreas}, year={2019} }","short":"A. Gehring, Untersuchungen Zum Energetischen Verhalten von Kunststoffverarbeitungsprozessen Auch Im Rahmen von Energiemanagementsystemen, 2019.","ama":"Gehring A. <i>Untersuchungen Zum Energetischen Verhalten von Kunststoffverarbeitungsprozessen Auch Im Rahmen von Energiemanagementsystemen</i>.; 2019.","chicago":"Gehring, Andreas. <i>Untersuchungen Zum Energetischen Verhalten von Kunststoffverarbeitungsprozessen Auch Im Rahmen von Energiemanagementsystemen</i>, 2019.","ieee":"A. Gehring, <i>Untersuchungen zum energetischen Verhalten von Kunststoffverarbeitungsprozessen auch im Rahmen von Energiemanagementsystemen</i>. 2019."},"year":"2019","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2023-01-19T12:14:00Z","user_id":"44116","author":[{"full_name":"Gehring, Andreas","last_name":"Gehring","first_name":"Andreas"}],"_id":"37602","date_updated":"2023-01-19T12:20:01Z","language":[{"iso":"eng"}],"title":"Untersuchungen zum energetischen Verhalten von Kunststoffverarbeitungsprozessen auch im Rahmen von Energiemanagementsystemen"},{"citation":{"apa":"Westhues, K. J. (2019). <i>Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern</i>.","bibtex":"@book{Westhues_2019, title={Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern}, author={Westhues, Kim Jacqueline}, year={2019} }","mla":"Westhues, Kim Jacqueline. <i>Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern</i>. 2019.","short":"K.J. Westhues, Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern, 2019.","ama":"Westhues KJ. <i>Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern</i>.; 2019.","chicago":"Westhues, Kim Jacqueline. <i>Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern</i>, 2019.","ieee":"K. J. Westhues, <i>Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern</i>. 2019."},"status":"public","year":"2019","type":"dissertation","language":[{"iso":"eng"}],"title":"Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern","author":[{"first_name":"Kim Jacqueline","last_name":"Westhues","full_name":"Westhues, Kim Jacqueline"}],"date_created":"2023-01-20T06:54:11Z","user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_updated":"2023-01-20T06:54:14Z","_id":"37619"},{"user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"_id":"25619","language":[{"iso":"eng"}],"type":"journal_article","publication":"Polymers","status":"public","date_created":"2021-10-07T08:51:02Z","author":[{"first_name":"Volker","full_name":"Schöppner, Volker","id":"20530","last_name":"Schöppner"},{"first_name":"M.","full_name":"Dörner, M.","last_name":"Dörner"},{"first_name":"C.","full_name":"Marschik, C.","last_name":"Marschik"},{"first_name":"W.","last_name":"Roland","full_name":"Roland, W."},{"full_name":"Miethlinger, J.","last_name":"Miethlinger","first_name":"J."},{"first_name":"G.","last_name":"Steinbichler","full_name":"Steinbichler, G."}],"date_updated":"2023-05-02T06:51:42Z","title":"Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).","quality_controlled":"1","publication_identifier":{"unknown":["DOI: 10.3390/polym11091488 "]},"citation":{"ieee":"V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).,” <i>Polymers</i>, pp. 1488–1515, 2019.","chicago":"Schöppner, Volker, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler. “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).” <i>Polymers</i>, 2019, 1488–1515.","ama":"Schöppner V, Dörner M, Marschik C, Roland W, Miethlinger J, Steinbichler G. Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows). <i>Polymers</i>. Published online 2019:1488-1515.","apa":"Schöppner, V., Dörner, M., Marschik, C., Roland, W., Miethlinger, J., &#38; Steinbichler, G. (2019). Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows). <i>Polymers</i>, 1488–1515.","mla":"Schöppner, Volker, et al. “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).” <i>Polymers</i>, 2019, pp. 1488–515.","short":"V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, G. Steinbichler, Polymers (2019) 1488–1515.","bibtex":"@article{Schöppner_Dörner_Marschik_Roland_Miethlinger_Steinbichler_2019, title={Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).}, journal={Polymers}, author={Schöppner, Volker and Dörner, M. and Marschik, C. and Roland, W. and Miethlinger, J. and Steinbichler, G.}, year={2019}, pages={1488–1515} }"},"page":"1488-1515","year":"2019"},{"_id":"44308","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"44116","language":[{"iso":"eng"}],"type":"conference","status":"public","date_updated":"2023-05-02T08:24:38Z","author":[{"full_name":"Bayazian, Hoda","last_name":"Bayazian","first_name":"Hoda"},{"last_name":"Schöppner","id":"20530","full_name":"Schöppner, Volker","first_name":"Volker"},{"last_name":"Yadegari ","full_name":"Yadegari , Ali","first_name":"Ali"},{"full_name":"Haddad , Hoda","last_name":"Haddad ","first_name":"Hoda"}],"date_created":"2023-05-02T08:24:35Z","title":"Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters","conference":{"location":"Türkei ","name":"35th PPS "},"quality_controlled":"1","year":"2019","citation":{"chicago":"Bayazian, Hoda, Volker Schöppner, Ali Yadegari , and Hoda Haddad . “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” 2019.","ieee":"H. Bayazian, V. Schöppner, A. Yadegari , and H. Haddad , “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS , Türkei , 2019.","ama":"Bayazian H, Schöppner V, Yadegari  A, Haddad  H. Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters. In: ; 2019.","mla":"Bayazian, Hoda, et al. <i>Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters</i>. 2019.","bibtex":"@inproceedings{Bayazian_Schöppner_Yadegari _Haddad _2019, title={Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters}, author={Bayazian, Hoda and Schöppner, Volker and Yadegari , Ali and Haddad , Hoda}, year={2019} }","short":"H. Bayazian, V. Schöppner, A. Yadegari , H. Haddad , in: 2019.","apa":"Bayazian, H., Schöppner, V., Yadegari , A., &#38; Haddad , H. (2019). <i>Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters</i>. 35th PPS , Türkei ."}},{"conference":{"name":"Werkstoffwoche (2019)","location":"Dresden (Deutschland)"},"title":"Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie","author":[{"full_name":"Schöppner, Volker","id":"20530","last_name":"Schöppner","first_name":"Volker"},{"last_name":"Wübbeke","id":"12504","full_name":"Wübbeke, Andrea","first_name":"Andrea"},{"full_name":"Paul, Andre","last_name":"Paul","first_name":"Andre"},{"full_name":"Tiemann, Michael","id":"23547","last_name":"Tiemann","orcid":"0000-0003-1711-2722","first_name":"Michael"},{"first_name":"F.","last_name":"Fitze","full_name":"Fitze, F."},{"id":"45326","full_name":"Austermeier, Laura","last_name":"Austermeier","first_name":"Laura"},{"last_name":"Chen","full_name":"Chen, M.","first_name":"M."},{"last_name":"Jakob","full_name":"Jakob, F.","first_name":"F."},{"full_name":"Heim, H.-P.","last_name":"Heim","first_name":"H.-P."},{"last_name":"Wu","full_name":"Wu, T.","first_name":"T."},{"full_name":"Niendorf, T.","last_name":"Niendorf","first_name":"T."},{"last_name":"Röhricht","full_name":"Röhricht, M-L.","first_name":"M-L."},{"full_name":"Schmidt, M.","last_name":"Schmidt","first_name":"M."}],"date_created":"2021-10-07T09:33:50Z","date_updated":"2023-05-05T10:01:36Z","citation":{"apa":"Schöppner, V., Wübbeke, A., Paul, A., Tiemann, M., Fitze, F., Austermeier, L., Chen, M., Jakob, F., Heim, H.-P., Wu, T., Niendorf, T., Röhricht, M.-L., &#38; Schmidt, M. (2019). Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie. <i>Werkstoffwoche (2019)</i>. Werkstoffwoche (2019), Dresden (Deutschland).","bibtex":"@inproceedings{Schöppner_Wübbeke_Paul_Tiemann_Fitze_Austermeier_Chen_Jakob_Heim_Wu_et al._2019, place={Dresden (Deutschland)}, title={Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie}, booktitle={Werkstoffwoche (2019)}, author={Schöppner, Volker and Wübbeke, Andrea and Paul, Andre and Tiemann, Michael and Fitze, F. and Austermeier, Laura and Chen, M. and Jakob, F. and Heim, H.-P. and Wu, T. and et al.}, year={2019} }","short":"V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, F. Fitze, L. Austermeier, M. Chen, F. Jakob, H.-P. Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt, in: Werkstoffwoche (2019), Dresden (Deutschland), 2019.","mla":"Schöppner, Volker, et al. “Langzeitfestigkeit von Schweißungen Aus PP Unter Berücksichtigung Der Morphologie.” <i>Werkstoffwoche (2019)</i>, 2019.","ama":"Schöppner V, Wübbeke A, Paul A, et al. Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie. In: <i>Werkstoffwoche (2019)</i>. ; 2019.","chicago":"Schöppner, Volker, Andrea Wübbeke, Andre Paul, Michael Tiemann, F. Fitze, Laura Austermeier, M. Chen, et al. “Langzeitfestigkeit von Schweißungen Aus PP Unter Berücksichtigung Der Morphologie.” In <i>Werkstoffwoche (2019)</i>. Dresden (Deutschland), 2019.","ieee":"V. Schöppner <i>et al.</i>, “Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie,” presented at the Werkstoffwoche (2019), Dresden (Deutschland), 2019."},"year":"2019","place":"Dresden (Deutschland)","quality_controlled":"1","language":[{"iso":"eng"}],"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"},{"_id":"35"},{"_id":"2"},{"_id":"307"}],"user_id":"14931","_id":"25641","status":"public","abstract":[{"lang":"eng","text":"Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie"}],"publication":"Werkstoffwoche (2019)","type":"conference"}]