---
_id: '22018'
abstract:
- lang: eng
  text: Fused Deposition Modeling (FDM) parts are prone to process-related rough and
    wavy surfaces with stair-stepping effects whenever the parts produced have sloped
    or rounded geometries. These stair-stepping effects can be reduced by using a
    smaller slice height, but complete elimination is not possible. In this paper,
    FDM parts manufactured with the material ABS-M30 are finished using mass finishing
    methods. The mass finishing is done with a trough vibrator, which is comparatively
    gentle to the parts in comparison to other mass finishing technologies. The analysis
    discusses the surface-smoothing effect of finishing time and intensity on various
    part sizes and build orientations. In addition, the dimensional accuracy of the
    parts after the finishing process is examined.
author:
- first_name: M.
  full_name: Fischer, M.
  last_name: Fischer
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Fischer M, Schöppner V. Finishing of ABS-M30 Parts Manufactured with Fused
    Deposition Modeling with Focus on Dimensional Accuracy. In: <i>25th Annual International
    Solid Freeform Fabrication Symposium</i>. Vol 25. ; 2014:923-934. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf</a>'
  apa: Fischer, M., &#38; Schöppner, V. (2014). Finishing of ABS-M30 Parts Manufactured
    with Fused Deposition Modeling with Focus on Dimensional Accuracy. <i>25th Annual
    International Solid Freeform Fabrication Symposium</i>, <i>25</i>, 923–934. <a
    href="http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf</a>
  bibtex: '@inproceedings{Fischer_Schöppner_2014, title={Finishing of ABS-M30 Parts
    Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy},
    volume={25}, DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf</a>},
    booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Fischer,
    M. and Schöppner, Volker}, year={2014}, pages={923–934} }'
  chicago: Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured
    with Fused Deposition Modeling with Focus on Dimensional Accuracy.” In <i>25th
    Annual International Solid Freeform Fabrication Symposium</i>, 25:923–34, 2014.
    <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf</a>.
  ieee: 'M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with
    Fused Deposition Modeling with Focus on Dimensional Accuracy,” in <i>25th Annual
    International Solid Freeform Fabrication Symposium</i>, 2014, vol. 25, pp. 923–934,
    doi: <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf</a>.'
  mla: Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured
    with Fused Deposition Modeling with Focus on Dimensional Accuracy.” <i>25th Annual
    International Solid Freeform Fabrication Symposium</i>, vol. 25, 2014, pp. 923–34,
    doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf</a>.
  short: 'M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication
    Symposium, 2014, pp. 923–934.'
date_created: 2021-05-07T13:22:57Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
intvolume: '        25'
language:
- iso: eng
page: 923-934
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with
  Focus on Dimensional Accuracy
type: conference
user_id: '70729'
volume: 25
year: '2014'
...
---
_id: '22030'
abstract:
- lang: eng
  text: Parts produced by Fused Deposition Modeling (FDM) tend to have rough and undulating
    surfaces with staircase effects on rounded and slanting areas of the part. This
    is due to the characteristics of the process. In many fields of application, high
    demands are made on the optical quality of the part. An improvement in the surface
    quality of FDM parts made of Ultem*9085 can be achieved through post-treatment
    with a mass finishing process. In this paper, FDM specimens are post-treated in
    a disk finishing unit. Influences of the mass finishing process are analyzed with
    regard to the dependence of surface quality on the various process parameters
    and on the finishing medium, grinding time and grinding speed. The finishing efficiency
    depends on the finishing media and decreases for lower finishing time. For all
    media a lower disk velocity results a smaller grinding effect, but there are clearly
    differences between the finishing media. The paper also discusses effects of the
    grinding process on the mechanical properties of the parts. Especially small part
    geometries and parts build in z-direction tend to break during the finishing process.
author:
- first_name: M.
  full_name: Fischer, M.
  last_name: Fischer
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Fischer M, Schöppner V. Effects of a mass finishing process on parts produced
    from Ultem 9085 by Fused Deposition Modeling. In: <i>ANTEC</i>. SPE: Society of
    Plastics Engineers; 2014:2331-2336.'
  apa: Fischer, M., &#38; Schöppner, V. (2014). Effects of a mass finishing process
    on parts produced from Ultem 9085 by Fused Deposition Modeling. <i>ANTEC</i>,
    2331–2336.
  bibtex: '@inproceedings{Fischer_Schöppner_2014, title={Effects of a mass finishing
    process on parts produced from Ultem 9085 by Fused Deposition Modeling}, booktitle={ANTEC},
    publisher={SPE: Society of Plastics Engineers}, author={Fischer, M. and Schöppner,
    Volker}, year={2014}, pages={2331–2336} }'
  chicago: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process
    on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” In <i>ANTEC</i>,
    2331–36. SPE: Society of Plastics Engineers, 2014.'
  ieee: M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts
    produced from Ultem 9085 by Fused Deposition Modeling,” in <i>ANTEC</i>, 2014,
    pp. 2331–2336.
  mla: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on
    Parts Produced from Ultem 9085 by Fused Deposition Modeling.” <i>ANTEC</i>, SPE:
    Society of Plastics Engineers, 2014, pp. 2331–36.'
  short: 'M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers,
    2014, pp. 2331–2336.'
date_created: 2021-05-07T13:23:11Z
date_updated: 2022-04-25T08:03:55Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
language:
- iso: eng
page: 2331-2336
publication: ANTEC
publication_identifier:
  isbn:
  - 978-1-63439-708-7
publisher: 'SPE: Society of Plastics Engineers'
quality_controlled: '1'
status: public
title: Effects of a mass finishing process on parts produced from Ultem 9085 by Fused
  Deposition Modeling
type: conference
user_id: '70729'
year: '2014'
...
---
_id: '22021'
abstract:
- lang: eng
  text: Additive production techniques have the advantage of manufacturing parts without
    needing a forming tool. One of the most used additive manufacturing processes
    is "Fused Deposition Modeling" (FDM) which allows the production of prototypes
    and end-use parts. Due to the manufacture layer by layer, also complex part geometries
    can be created in one working step. Furthermore, lightweight parts with specific
    inner core structures can be manufactured in order to achieve good weightrelated
    strength properties. In this paper the mechanical behavior of lightweight parts
    manufactured with the 3D production system Fortus 400mc from Stratasys and the
    material Polyetherimide (PEI) with the trade name Ultem*9085 is analyzed. The
    test specimens were built up with different inner structures and building directions.
    Therefore, test specimens with known lightweight core geometries (e.g. corrugated
    and honeycomb cores) were designed. A four-point bending test was conducted to
    analyze the strength properties as well as the weight-related strength properties.
    Additionally the influence of the structure width, the structure wall thickness
    and the top layer thickness was analyzed using a honeycomb structure.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: S.
  full_name: Josupeit, S.
  last_name: Josupeit
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Josupeit S, Schöppner V, Klemp E. Mechanical Analysis of Lightweight
    Constructions manufactured with Fused Deposition Modeling. In: <i>29th International
    Conference of the Polymer Processing Society</i>. Vol 29. American Institute of
    Physics ; 2014:696-701. doi:<a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>'
  apa: Bagsik, A., Josupeit, S., Schöppner, V., &#38; Klemp, E. (2014). Mechanical
    Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling.
    <i>29th International Conference of the Polymer Processing Society</i>, <i>29</i>,
    696–701. <a href="https://doi.org/10.1063/1.4873874">https://doi.org/10.1063/1.4873874</a>
  bibtex: '@inproceedings{Bagsik_Josupeit_Schöppner_Klemp_2014, title={Mechanical
    Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling},
    volume={29}, DOI={<a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>},
    booktitle={29th International Conference of the Polymer Processing Society}, publisher={American
    Institute of Physics }, author={Bagsik, A. and Josupeit, S. and Schöppner, Volker
    and Klemp, E.}, year={2014}, pages={696–701} }'
  chicago: Bagsik, A., S. Josupeit, Volker Schöppner, and E. Klemp. “Mechanical Analysis
    of Lightweight Constructions Manufactured with Fused Deposition Modeling.” In
    <i>29th International Conference of the Polymer Processing Society</i>, 29:696–701.
    American Institute of Physics , 2014. <a href="https://doi.org/10.1063/1.4873874">https://doi.org/10.1063/1.4873874</a>.
  ieee: 'A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis
    of Lightweight Constructions manufactured with Fused Deposition Modeling,” in
    <i>29th International Conference of the Polymer Processing Society</i>, 2014,
    vol. 29, pp. 696–701, doi: <a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>.'
  mla: Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured
    with Fused Deposition Modeling.” <i>29th International Conference of the Polymer
    Processing Society</i>, vol. 29, American Institute of Physics , 2014, pp. 696–701,
    doi:<a href="https://doi.org/10.1063/1.4873874">10.1063/1.4873874</a>.
  short: 'A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference
    of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.'
date_created: 2021-05-07T13:23:00Z
date_updated: 2022-04-25T08:05:29Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.4873874
intvolume: '        29'
language:
- iso: eng
page: 696-701
publication: 29th International Conference of the Polymer Processing Society
publisher: 'American Institute of Physics '
quality_controlled: '1'
status: public
title: Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition
  Modeling
type: conference
user_id: '70729'
volume: 29
year: '2014'
...
---
_id: '27697'
author:
- first_name: Cathrin
  full_name: Schröder , Cathrin
  last_name: 'Schröder '
citation:
  ama: Schröder  C. <i>Verfahrenstechnische Entwicklung Zum Hinterspritzen von Echtholzfurnieren
    Mit Wood-Plastic-Composites (WPC) </i>.; 2013.
  apa: Schröder , C. (2013). <i>Verfahrenstechnische Entwicklung zum Hinterspritzen
    von Echtholzfurnieren mit Wood-Plastic-Composites (WPC) </i>.
  bibtex: '@book{Schröder _2013, title={Verfahrenstechnische Entwicklung zum Hinterspritzen
    von Echtholzfurnieren mit Wood-Plastic-Composites (WPC) }, author={Schröder ,
    Cathrin}, year={2013} }'
  chicago: Schröder , Cathrin. <i>Verfahrenstechnische Entwicklung Zum Hinterspritzen
    von Echtholzfurnieren Mit Wood-Plastic-Composites (WPC) </i>, 2013.
  ieee: C. Schröder , <i>Verfahrenstechnische Entwicklung zum Hinterspritzen von Echtholzfurnieren
    mit Wood-Plastic-Composites (WPC) </i>. 2013.
  mla: Schröder , Cathrin. <i>Verfahrenstechnische Entwicklung Zum Hinterspritzen
    von Echtholzfurnieren Mit Wood-Plastic-Composites (WPC) </i>. 2013.
  short: C. Schröder , Verfahrenstechnische Entwicklung Zum Hinterspritzen von Echtholzfurnieren
    Mit Wood-Plastic-Composites (WPC) , 2013.
date_created: 2021-11-22T09:22:43Z
date_updated: 2022-01-06T06:57:44Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: 'Verfahrenstechnische Entwicklung zum Hinterspritzen von Echtholzfurnieren
  mit Wood-Plastic-Composites (WPC) '
type: dissertation
user_id: '44116'
year: '2013'
...
---
_id: '27698'
author:
- first_name: Tobias
  full_name: Hallmann, Tobias
  last_name: Hallmann
citation:
  ama: Hallmann T. <i>Untersuchung Des Prozessverhaltens Neuartiger Einzugzonen-Konzepte
    Für Kautschukextruder</i>.; 2013.
  apa: Hallmann, T. (2013). <i>Untersuchung des Prozessverhaltens neuartiger Einzugzonen-Konzepte
    für Kautschukextruder</i>.
  bibtex: '@book{Hallmann_2013, title={Untersuchung des Prozessverhaltens neuartiger
    Einzugzonen-Konzepte für Kautschukextruder}, author={Hallmann, Tobias}, year={2013}
    }'
  chicago: Hallmann, Tobias. <i>Untersuchung Des Prozessverhaltens Neuartiger Einzugzonen-Konzepte
    Für Kautschukextruder</i>, 2013.
  ieee: T. Hallmann, <i>Untersuchung des Prozessverhaltens neuartiger Einzugzonen-Konzepte
    für Kautschukextruder</i>. 2013.
  mla: Hallmann, Tobias. <i>Untersuchung Des Prozessverhaltens Neuartiger Einzugzonen-Konzepte
    Für Kautschukextruder</i>. 2013.
  short: T. Hallmann, Untersuchung Des Prozessverhaltens Neuartiger Einzugzonen-Konzepte
    Für Kautschukextruder, 2013.
date_created: 2021-11-22T09:24:34Z
date_updated: 2022-01-06T06:57:44Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: Untersuchung des Prozessverhaltens neuartiger Einzugzonen-Konzepte für Kautschukextruder
type: dissertation
user_id: '44116'
year: '2013'
...
---
_id: '22017'
abstract:
- lang: eng
  text: Fused Deposition Modeling (FDM) parts are typically subject to process-related
    rough or wavy surfaces, with stair-stepping effects whenever the parts produced
    have sloped or rounded part geometries; however, the level of optical quality
    frequently required demands that parts feature a smooth surface. In this paper,
    the results of a high-energy finishing process, which uses a disc finishing unit
    and is designed for parts manufactured with the material Ultem*9085, are presented.
    The analysis discusses the surface-smoothing effect of various finishing materials
    with varying geometries, as well as the effect of finishing time and speed. Additionally,
    the efficiency of the surface treatment has been analyzed specifically at corners,
    edges and in cavities.
author:
- first_name: M.
  full_name: Fischer, M.
  last_name: Fischer
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Fischer M, Schöppner V. Some Investigations Regarding the Surface Treatment
    of Ultem 9085 Parts Manufactured with Fused Deposition Modeling. In: <i>24th Annual
    International Solid Freeform Fabrication Symposium</i>. Vol 24. ; 2013:805-815.
    doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>'
  apa: Fischer, M., &#38; Schöppner, V. (2013). Some Investigations Regarding the
    Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.
    <i>24th Annual International Solid Freeform Fabrication Symposium</i>, <i>24</i>,
    805–815. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>
  bibtex: '@inproceedings{Fischer_Schöppner_2013, title={Some Investigations Regarding
    the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling},
    volume={24}, DOI={<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>},
    booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Fischer,
    M. and Schöppner, Volker}, year={2013}, pages={805–815} }'
  chicago: Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface
    Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.” In
    <i>24th Annual International Solid Freeform Fabrication Symposium</i>, 24:805–15,
    2013. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>.
  ieee: 'M. Fischer and V. Schöppner, “Some Investigations Regarding the Surface Treatment
    of Ultem 9085 Parts Manufactured with Fused Deposition Modeling,” in <i>24th Annual
    International Solid Freeform Fabrication Symposium</i>, 2013, vol. 24, pp. 805–815,
    doi: <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>.'
  mla: Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface
    Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.” <i>24th
    Annual International Solid Freeform Fabrication Symposium</i>, vol. 24, 2013,
    pp. 805–15, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf</a>.
  short: 'M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication
    Symposium, 2013, pp. 805–815.'
date_created: 2021-05-07T13:22:55Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf
intvolume: '        24'
language:
- iso: eng
page: 805-815
publication: 24th Annual International Solid Freeform Fabrication Symposium
status: public
title: Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured
  with Fused Deposition Modeling
type: conference
user_id: '70729'
volume: 24
year: '2013'
...
---
_id: '22016'
abstract:
- lang: eng
  text: Relating to the direct manufacturing of end-use parts the knowledge about
    the effect of the long-term ageing of Fused Deposition Modeling (FDM) parts is
    of particular importance. For this, tensile specimens were stored for time periods
    of up to 52 weeks in two different conditions and the testing was conducted at
    different temperatures within a temperature range of -60°C to +160°C. Further
    tests were made after the exposure in multiple media. The parts were built up
    with the system “Fortus 400mc” from Stratasys with the material Ultem*9085 in
    two different build directions, the strongest direction X (on its side) and the
    weakest build direction Z (upright) and with the standard toolpath parameters
    of the Insight software version 7.0.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. Long-Term ageing effects on Fused Deposition
    Modeling Parts manufactured with ULTEM*9085. In: <i>23rd Annual International
    Solid Freeform Fabrication Symposium</i>. Vol 23. ; 2012:629-640. doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2012). Long-Term ageing effects
    on Fused Deposition Modeling Parts manufactured with ULTEM*9085. <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i>, <i>23</i>, 629–640. <a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Long-Term ageing effects
    on Fused Deposition Modeling Parts manufactured with ULTEM*9085}, volume={23},
    DOI={<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>},
    booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Bagsik,
    A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={629–640} }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Long-Term Ageing Effects on
    Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i>, 23:629–40, 2012. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>.
  ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused
    Deposition Modeling Parts manufactured with ULTEM*9085,” in <i>23rd Annual International
    Solid Freeform Fabrication Symposium</i>, 2012, vol. 23, pp. 629–640, doi: <a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>.'
  mla: Bagsik, A., et al. “Long-Term Ageing Effects on Fused Deposition Modeling Parts
    Manufactured with ULTEM*9085.” <i>23rd Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 23, 2012, pp. 629–40, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf</a>.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform
    Fabrication Symposium, 2012, pp. 629–640.'
date_created: 2021-05-07T13:22:54Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
intvolume: '        23'
language:
- iso: eng
page: 629-640
publication: 23rd Annual International Solid Freeform Fabrication Symposium
status: public
title: Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with
  ULTEM*9085
type: conference
user_id: '70729'
volume: 23
year: '2012'
...
---
_id: '22164'
abstract:
- lang: eng
  text: Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is "Fused Deposition Modeling" (FDM). It is one of
    the most used additive manufacturing processes to produce prototypes and end-use
    parts. From a 3D-CAD data set, components and assemblies are manufactured out
    of thermoplastic material layer by layer by means of an additive process. An extrusion
    head deposits the molten thermoplastic filament to create each layer with a particular
    tool path. Due to the thermal fusion the material bonds with the layer beneath
    and solidifies. Thus a permanent bonding of two layers is formed. In this paper
    the mechanical data of parts, manufactured with the system Fortus 400mc from Stratasys
    with the material Ultem*9085 are presented. Tensile and flexural tests according
    to both, the ASTM and the ISO standard, are conducted. Test specimens are generated
    with the standard parameters of the native software in different build directions.
    The tests show different strength and strain characteristics that depend on the
    given structure as a result of the build direction. Furthermore tensile specimens
    according to the ASTM standard are generated with changed parameters of the native
    software to increase the mechanical strength properties. The results are compared
    to injection molded strength properties.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. Tensile and Flexural Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085. In: <i>1st International Conference
    on Thermo-Mechanically Graded Materials</i>. Vol 1. ; 2012:129-134.'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2012). Tensile and Flexural Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, <i>1</i>, 129–134.
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Tensile and Flexural
    Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085}, volume={1},
    booktitle={1st International Conference on Thermo-Mechanically Graded Materials},
    author={Bagsik, A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={129–134}
    }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Tensile and Flexural Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, 1:129–34, 2012.
  ieee: A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of
    Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in <i>1st International
    Conference on Thermo-Mechanically Graded Materials</i>, 2012, vol. 1, pp. 129–134.
  mla: Bagsik, A., et al. “Tensile and Flexural Properties of Fused Deposition Modeling
    Parts Manufactured with ULTEM*9085.” <i>1st International Conference on Thermo-Mechanically
    Graded Materials</i>, vol. 1, 2012, pp. 129–34.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically
    Graded Materials, 2012, pp. 129–134.'
date_created: 2021-05-14T07:24:35Z
date_updated: 2022-04-25T07:58:51Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
intvolume: '         1'
language:
- iso: eng
page: 129-134
publication: 1st International Conference on Thermo-Mechanically Graded Materials
publication_identifier:
  isbn:
  - '9783942267588'
quality_controlled: '1'
status: public
title: Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured
  with ULTEM*9085
type: conference
user_id: '70729'
volume: 1
year: '2012'
...
---
_id: '22024'
abstract:
- lang: eng
  text: 'Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is “Fused Deposition Modeling” (FDM). It is one of
    the most used additive manufacturing processes to produce prototypes and end-use
    parts. From a 3D-CAD data set, components and assemblies are manufactured out
    of thermoplastic material layer by layer by means of an additive process. An extrusion
    head deposits the molten thermoplastic filament to create each layer with a particular
    tool path. In this paper the mechanical data of parts, manufactured with the system
    Fortus 400mc from Stratasys with the material Ultem*9085 are presented. Tensile
    specimens are generated with the standard parameters as well as with changed parameters
    of the native software to analyze the influence of these parameters on the mechanical
    strength properties. The tensile tests show different strength and strain characteristics
    that depend on the given structure and as a result of the build direction. Furthermore
    the toolpath parameters have an effect on the strength characteristics and the
    break behavior. In addition, tensile specimens are tested under the influence
    of different temperatures and after a thermal cycling. '
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. Extensive Analysis of the mechanical strength
    properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085. In:
    <i>5th International Conference on Polymer and Mould Innovations</i>. Vol 5. Centre
    for Polymer and Material Technology, Univ. College, Ghent Univ.; 2012:266-272.
    doi:<a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2012). Extensive Analysis of the
    mechanical strength properties of Fused Deposition Modeling Parts manufactured
    with ULTEM 9085. <i>5th International Conference on Polymer and Mould Innovations</i>,
    <i>5</i>, 266–272. <a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, place={Ghent}, title={Extensive
    Analysis of the mechanical strength properties of Fused Deposition Modeling Parts
    manufactured with ULTEM 9085}, volume={5}, DOI={<a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>},
    booktitle={5th International Conference on Polymer and Mould Innovations}, publisher={Centre
    for Polymer and Material Technology, Univ. College, Ghent Univ.}, author={Bagsik,
    A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={266–272} }'
  chicago: 'Bagsik, A., Volker Schöppner, and E. Klemp. “Extensive Analysis of the
    Mechanical Strength Properties of Fused Deposition Modeling Parts Manufactured
    with ULTEM 9085.” In <i>5th International Conference on Polymer and Mould Innovations</i>,
    5:266–72. Ghent: Centre for Polymer and Material Technology, Univ. College, Ghent
    Univ., 2012. <a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>.'
  ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “Extensive Analysis of the mechanical
    strength properties of Fused Deposition Modeling Parts manufactured with ULTEM
    9085,” in <i>5th International Conference on Polymer and Mould Innovations</i>,
    2012, vol. 5, pp. 266–272, doi: <a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>.'
  mla: Bagsik, A., et al. “Extensive Analysis of the Mechanical Strength Properties
    of Fused Deposition Modeling Parts Manufactured with ULTEM 9085.” <i>5th International
    Conference on Polymer and Mould Innovations</i>, vol. 5, Centre for Polymer and
    Material Technology, Univ. College, Ghent Univ., 2012, pp. 266–72, doi:<a href="https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616">https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616</a>.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer
    and Mould Innovations, Centre for Polymer and Material Technology, Univ. College,
    Ghent Univ., Ghent, 2012, pp. 266–272.'
date_created: 2021-05-07T13:23:04Z
date_updated: 2022-04-25T08:05:52Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616
intvolume: '         5'
language:
- iso: eng
page: 266-272
place: Ghent
publication: 5th International Conference on Polymer and Mould Innovations
publisher: Centre for Polymer and Material Technology, Univ. College, Ghent Univ.
quality_controlled: '1'
status: public
title: Extensive Analysis of the mechanical strength properties of Fused Deposition
  Modeling Parts manufactured with ULTEM 9085
type: conference
user_id: '70729'
volume: 5
year: '2012'
...
---
_id: '22029'
abstract:
- lang: eng
  text: In this work the influence of the orientation and the toolpath generation
    of manufactured parts based on the mechanical data are analyzed. Tensile Specimen
    are generated with the given parameters as well as with changing parameters of
    the native software based upon the CAD data. The parts then are built up with
    the “Fortus 400mc” from Stratasys. First tensile tests show different strength
    and strain characteristics that depend on the given structure and as a result
    of the build direction. The influence of the parameters was analyzed with a statistic
    test method by using the software Design Expert.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Bagsik A, Schöppner V. Mechanical Properties of Fused Deposition Modeling
    Parts Manufactured with ULTEM*9085. In: <i>ANTEC</i>. ; 2011:1294-1298. doi:<a
    href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>'
  apa: Bagsik, A., &#38; Schöppner, V. (2011). Mechanical Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085. <i>ANTEC</i>, 1294–1298. <a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_2011, title={Mechanical Properties of Fused
    Deposition Modeling Parts Manufactured with ULTEM*9085}, DOI={<a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>},
    booktitle={ANTEC}, author={Bagsik, A. and Schöppner, Volker}, year={2011}, pages={1294–1298}
    }'
  chicago: Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085.” In <i>ANTEC</i>, 1294–98, 2011.
    <a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>.
  ieee: 'A. Bagsik and V. Schöppner, “Mechanical Properties of Fused Deposition Modeling
    Parts Manufactured with ULTEM*9085,” in <i>ANTEC</i>, 2011, pp. 1294–1298, doi:
    <a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>.'
  mla: Bagsik, A., and Volker Schöppner. “Mechanical Properties of Fused Deposition
    Modeling Parts Manufactured with ULTEM*9085.” <i>ANTEC</i>, 2011, pp. 1294–98,
    doi:<a href="https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf">https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf</a>.
  short: 'A. Bagsik, V. Schöppner, in: ANTEC, 2011, pp. 1294–1298.'
date_created: 2021-05-07T13:23:09Z
date_updated: 2022-04-25T08:04:05Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf
language:
- iso: eng
page: 1294-1298
publication: ANTEC
quality_controlled: '1'
status: public
title: Mechanical Properties of Fused Deposition Modeling Parts Manufactured with
  ULTEM*9085
type: conference
user_id: '70729'
year: '2011'
...
---
_id: '23858'
abstract:
- lang: eng
  text: A large proportion of plastics today is compounded, which means the process
    from refining a raw material to the processable material. For this process compounding
    extruders are used which mostly involve tightly intermeshing, co-rotating twin
    screw extruders. These extruders consist of two closely spaced screws which rotate
    in the same direction and convey the raw material to the screw tip. These screws
    are surrounded by several barrel modules which heat or cool the material. As the
    whole design of the machine is modularly arranged the process behavior of a twin
    screw extruder depends for the main part on the arrangement of the screw and the
    barrel elements. Until today this arrangement and process optimization is conducted
    by experienced engineers and with the help of trial-and-error methods. Furthermore,
    theoretical models are used with which the behavior of the extruder is estimated.
    As these models are mostly very complex they are only made available with the
    realization in different software projects. One of the tools is called SIGMA.
    Within this paper SIGMA is introduced as a software to optimize a twin screw extruder.
    SIGMA supports the engineer already in the early stages of the extruder arrangement.
author:
- first_name: Nils
  full_name: Kretzschmar, Nils
  id: '15387'
  last_name: Kretzschmar
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Kretzschmar N, Schöppner V. Simulating Tightly Intermeshing, Co-Rotating Twin
    Screw Extruders with SIGMA. In: <i>Proceedings of the 2010 Summer Computer Simulation
    Conference</i>. SCSC ’10. San Diego, CA, USA: Society for Computer Simulation
    International; 2010:133–140.'
  apa: 'Kretzschmar, N., &#38; Schöppner, V. (2010). Simulating Tightly Intermeshing,
    Co-Rotating Twin Screw Extruders with SIGMA. In <i>Proceedings of the 2010 Summer
    Computer Simulation Conference</i> (pp. 133–140). San Diego, CA, USA: Society
    for Computer Simulation International.'
  bibtex: '@inproceedings{Kretzschmar_Schöppner_2010, place={San Diego, CA, USA},
    series={SCSC ’10}, title={Simulating Tightly Intermeshing, Co-Rotating Twin Screw
    Extruders with SIGMA}, booktitle={Proceedings of the 2010 Summer Computer Simulation
    Conference}, publisher={Society for Computer Simulation International}, author={Kretzschmar,
    Nils and Schöppner, Volker}, year={2010}, pages={133–140}, collection={SCSC ’10}
    }'
  chicago: 'Kretzschmar, Nils, and Volker Schöppner. “Simulating Tightly Intermeshing,
    Co-Rotating Twin Screw Extruders with SIGMA.” In <i>Proceedings of the 2010 Summer
    Computer Simulation Conference</i>, 133–140. SCSC ’10. San Diego, CA, USA: Society
    for Computer Simulation International, 2010.'
  ieee: N. Kretzschmar and V. Schöppner, “Simulating Tightly Intermeshing, Co-Rotating
    Twin Screw Extruders with SIGMA,” in <i>Proceedings of the 2010 Summer Computer
    Simulation Conference</i>, 2010, pp. 133–140.
  mla: Kretzschmar, Nils, and Volker Schöppner. “Simulating Tightly Intermeshing,
    Co-Rotating Twin Screw Extruders with SIGMA.” <i>Proceedings of the 2010 Summer
    Computer Simulation Conference</i>, Society for Computer Simulation International,
    2010, pp. 133–140.
  short: 'N. Kretzschmar, V. Schöppner, in: Proceedings of the 2010 Summer Computer
    Simulation Conference, Society for Computer Simulation International, San Diego,
    CA, USA, 2010, pp. 133–140.'
date_created: 2021-09-07T10:31:48Z
date_updated: 2022-01-06T06:56:02Z
department:
- _id: '367'
keyword:
- process optimization
- polymer engineering
- compounding
- twin screw extruder
- simulation
language:
- iso: eng
page: 133–140
place: San Diego, CA, USA
publication: Proceedings of the 2010 Summer Computer Simulation Conference
publisher: Society for Computer Simulation International
series_title: SCSC '10
status: public
title: Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA
type: conference
user_id: '15387'
year: '2010'
...
---
_id: '22050'
abstract:
- lang: eng
  text: Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is “Fused Deposition Modeling” (FDM). From a 3D-CAD
    data set, components and assemblies are manufactured out of thermoplastic material
    in only a few working steps. Native software automatically slices the data, calculates
    the support structures, and creates toolpaths. The parts then are built up layer
    by layer by means of an additive process. An extrusion head deposits the molten
    thermoplastic filament to create each layer. This technology began as a process
    for creating prototype parts; recently it has found new utility in the production
    of manufacturing tools and as a manufacturing process for end-use parts. In order
    to be used as a part for serial production, the components must possess the required
    mechanical properties. To this end, not only is the chosen material relevant,
    but a correct process control is also necessary. An interesting material for the
    aircraft and automotive industry is the material PEI with the trade name Ultem*9085.
    This material should typically be used on FDM-machines for the manufacturing of
    end products. The aim of the research is to determine the present mechanical data
    based on the process control, as well as reproducibility from job to job. In this
    work the influence of the orientation and the structure of the manufactured parts
    based on the mechanical data are analyzed. Sample parts are generated with the
    given parameters of the native software based upon the CAD data. First, specimens
    were analyzed concerning their geometry and configuration. The dimensions and
    weight were measured. The mechanical tests conducted were the tensile and compression
    tests.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. FDM Part Quality Manufactured with ULTEM 9085.
    In: <i>Proceedings of International Conference Polymeric Materials</i>. ; 2010.
    doi:<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2010). FDM Part Quality Manufactured
    with ULTEM 9085. <i>Proceedings of International Conference Polymeric Materials</i>.
    <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2010, title={FDM Part Quality Manufactured
    with ULTEM 9085}, DOI={<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>},
    booktitle={Proceedings of International Conference Polymeric Materials}, author={Bagsik,
    A. and Schöppner, Volker and Klemp, E.}, year={2010} }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “FDM Part Quality Manufactured
    with ULTEM 9085.” In <i>Proceedings of International Conference Polymeric Materials</i>,
    2010. <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.
  ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with
    ULTEM 9085,” 2010, doi: <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.'
  mla: Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.” <i>Proceedings
    of International Conference Polymeric Materials</i>, 2010, doi:<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference
    Polymeric Materials, 2010.'
date_created: 2021-05-07T13:23:34Z
date_updated: 2022-04-25T08:04:26Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
language:
- iso: eng
publication: Proceedings of International Conference Polymeric Materials
publication_identifier:
  isbn:
  - 978-3-868-29282-4
quality_controlled: '1'
status: public
title: FDM Part Quality Manufactured with ULTEM 9085
type: conference
user_id: '70729'
year: '2010'
...