[{"abstract":[{"text":"Within the scope of the research project, four new mechanical joining processes for the singlestage, pre-hole-free joining of FRP-FRP joints were further developed. For this purpose, the joining processes under consideration were first implemented on existing equipment at the research institute. Based on the successful adaptation of the joining processes, characteristics of the joints were documented by means of micrographs and observation of external characteristics, on the basis of which measures for process modification were derived. The process modifications were carried out on a process-specific basis for a selected GFRPGFRP joint. The aim was to improve the joint quality, in particular with regard to the reduction of laminate damage, by means of targeted element and tool development in addition to the increase in process stability. Based on these results, a realistic suitability evaluation of the\r\njoining methods was carried out with regard to process and manufacturing flexibility. As a result, two self-piercing riveting processes, which showed the greatest suitability potential, were examined in more detail to analyse the application limits. In the process, the joints were sampled on further material combinations with varied fibre and matrix systems. In addition, joints with adhesive were investigated, in which the influence of the adhesive viscosity on the joint properties was analysed. The joint properties of the new joining method were then comprehensively determined by tensile tests under quasi-static, cyclic loads. Finally, the behaviour of the optimised joints under corrosive load was characterised in the salt spray test. Through the targeted process modifications in this project, the FRP-FRP joints can be joined\r\nwith less damage, enabling improved joint quality in the FRP-based components.","lang":"eng"}],"title":"Mechanisches Fügen von FKV-FKV-Verbindungen","author":[{"first_name":"Daxin","full_name":"Han, Daxin","id":"36544","last_name":"Han"},{"full_name":"Meschut, Gerson","first_name":"Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246"}],"department":[{"_id":"157"}],"citation":{"bibtex":"@book{Han_Meschut_2021, title={Mechanisches Fügen von FKV-FKV-Verbindungen}, author={Han, Daxin and Meschut, Gerson}, year={2021} }","mla":"Han, Daxin, and Gerson Meschut. <i>Mechanisches Fügen von FKV-FKV-Verbindungen</i>. 2021.","short":"D. Han, G. Meschut, Mechanisches Fügen von FKV-FKV-Verbindungen, 2021.","ama":"Han D, Meschut G. <i>Mechanisches Fügen von FKV-FKV-Verbindungen</i>.; 2021.","apa":"Han, D., &#38; Meschut, G. (2021). <i>Mechanisches Fügen von FKV-FKV-Verbindungen</i>.","ieee":"D. Han and G. Meschut, <i>Mechanisches Fügen von FKV-FKV-Verbindungen</i>. 2021.","chicago":"Han, Daxin, and Gerson Meschut. <i>Mechanisches Fügen von FKV-FKV-Verbindungen</i>, 2021."},"user_id":"36544","publication_status":"published","year":"2021","publication_identifier":{"isbn":["978-3-86776-618-0"]},"type":"book","language":[{"iso":"ger"}],"status":"public","quality_controlled":"1","date_created":"2021-10-21T07:56:34Z","date_updated":"2022-01-06T06:57:24Z","_id":"26649"},{"status":"public","year":"2021","type":"book","language":[{"iso":"ger"}],"publisher":"Springer","date_created":"2021-10-21T08:47:53Z","date_updated":"2022-01-06T06:57:24Z","_id":"26656","place":"Wiesbaden","author":[{"last_name":"Franzen","id":"75124","first_name":"Katja","full_name":"Franzen, Katja"}],"title":"Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung","department":[{"_id":"460"}],"user_id":"75124","citation":{"apa":"Franzen, K. (2021). <i>Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung</i>. Springer.","ama":"Franzen K. <i>Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung</i>. Springer; 2021.","ieee":"K. Franzen, <i>Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung</i>. Wiesbaden: Springer, 2021.","chicago":"Franzen, Katja. <i>Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung</i>. Wiesbaden: Springer, 2021.","bibtex":"@book{Franzen_2021, place={Wiesbaden}, title={Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung}, publisher={Springer}, author={Franzen, Katja}, year={2021} }","mla":"Franzen, Katja. <i>Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung</i>. Springer, 2021.","short":"K. Franzen, Quellen der Selbstwirksamkeitsüberzeugung von Grundschullehrkräften im Kontext inklusiver Erziehung und Bildung, Springer, Wiesbaden, 2021."}},{"publisher":"Springer","publication":"Digital transformation of learning organizations","date_created":"2021-10-21T11:49:35Z","status":"public","type":"book_chapter","year":"2021","language":[{"iso":"eng"}],"page":"95-113","_id":"26686","date_updated":"2022-01-06T06:57:25Z","editor":[{"first_name":"Dirk","full_name":"Ifenthaler, Dirk","last_name":"Ifenthaler"}],"author":[{"full_name":"Berisha-Gawlowski, Angelina","first_name":"Angelina","last_name":"Berisha-Gawlowski"},{"last_name":"Caruso","full_name":"Caruso, Carina","first_name":"Carina"},{"id":"27503","last_name":"Harteis","first_name":"Christian","full_name":"Harteis, Christian","orcid":"https://orcid.org/0000-0002-3570-7626"}],"title":"The concept of a digital twin and its potential for learning organizations","place":"Cham","user_id":"27503","publication_status":"published","citation":{"short":"A. Berisha-Gawlowski, C. Caruso, C. Harteis, in: D. Ifenthaler (Ed.), Digital Transformation of Learning Organizations, Springer, Cham, 2021, pp. 95–113.","mla":"Berisha-Gawlowski, Angelina, et al. “The Concept of a Digital Twin and Its Potential for Learning Organizations.” <i>Digital Transformation of Learning Organizations</i>, edited by Dirk Ifenthaler, Springer, 2021, pp. 95–113.","bibtex":"@inbook{Berisha-Gawlowski_Caruso_Harteis_2021, place={Cham}, title={The concept of a digital twin and its potential for learning organizations}, booktitle={Digital transformation of learning organizations}, publisher={Springer}, author={Berisha-Gawlowski, Angelina and Caruso, Carina and Harteis, Christian}, editor={Ifenthaler, Dirk}, year={2021}, pages={95–113} }","chicago":"Berisha-Gawlowski, Angelina, Carina Caruso, and Christian Harteis. “The Concept of a Digital Twin and Its Potential for Learning Organizations.” In <i>Digital Transformation of Learning Organizations</i>, edited by Dirk Ifenthaler, 95–113. Cham: Springer, 2021.","ieee":"A. Berisha-Gawlowski, C. Caruso, and C. Harteis, “The concept of a digital twin and its potential for learning organizations,” in <i>Digital transformation of learning organizations</i>, D. Ifenthaler, Ed. Cham: Springer, 2021, pp. 95–113.","ama":"Berisha-Gawlowski A, Caruso C, Harteis C. The concept of a digital twin and its potential for learning organizations. In: Ifenthaler D, ed. <i>Digital Transformation of Learning Organizations</i>. Springer; 2021:95-113.","apa":"Berisha-Gawlowski, A., Caruso, C., &#38; Harteis, C. (2021). The concept of a digital twin and its potential for learning organizations. In D. Ifenthaler (Ed.), <i>Digital transformation of learning organizations</i> (pp. 95–113). Springer."},"department":[{"_id":"452"}]},{"department":[{"_id":"452"}],"user_id":"27503","publication_status":"published","citation":{"ieee":"C. Harteis, “Die Forderung nach Lebenslangem Lernen: Zwischen Banalität, Herausforderung und Zumutung,” in <i>Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis </i>, H. Gembris, S. Herbst, J. Menze, and T. Krettenauer, Eds. Münster: Lit, 2021, pp. 37–50.","chicago":"Harteis, Christian. “Die Forderung nach Lebenslangem Lernen: Zwischen Banalität, Herausforderung und Zumutung.” In <i>Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis </i>, edited by Heiner Gembris, S. Herbst, J. Menze, and Thomas Krettenauer, 37–50. Münster: Lit, 2021.","ama":"Harteis C. Die Forderung nach Lebenslangem Lernen: Zwischen Banalität, Herausforderung und Zumutung. In: Gembris H, Herbst S, Menze J, Krettenauer T, eds. <i>Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis </i>. Lit; 2021:37-50.","apa":"Harteis, C. (2021). Die Forderung nach Lebenslangem Lernen: Zwischen Banalität, Herausforderung und Zumutung. In H. Gembris, S. Herbst, J. Menze, &#38; T. Krettenauer (Eds.), <i>Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis </i> (pp. 37–50). Lit.","short":"C. Harteis, in: H. Gembris, S. Herbst, J. Menze, T. Krettenauer (Eds.), Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis , Lit, Münster, 2021, pp. 37–50.","bibtex":"@inbook{Harteis_2021, place={Münster}, title={Die Forderung nach Lebenslangem Lernen: Zwischen Banalität, Herausforderung und Zumutung}, booktitle={Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis }, publisher={Lit}, author={Harteis, Christian}, editor={Gembris, Heiner and Herbst, S. and Menze, J. and Krettenauer, Thomas}, year={2021}, pages={37–50} }","mla":"Harteis, Christian. “Die Forderung nach Lebenslangem Lernen: Zwischen Banalität, Herausforderung und Zumutung.” <i>Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis </i>, edited by Heiner Gembris et al., Lit, 2021, pp. 37–50."},"place":"Münster","author":[{"orcid":"https://orcid.org/0000-0002-3570-7626","id":"27503","last_name":"Harteis","full_name":"Harteis, Christian","first_name":"Christian"}],"editor":[{"last_name":"Gembris","full_name":"Gembris, Heiner","first_name":"Heiner"},{"first_name":"S.","full_name":"Herbst, S.","last_name":"Herbst"},{"first_name":"J.","full_name":"Menze, J.","last_name":"Menze"},{"full_name":"Krettenauer, Thomas","first_name":"Thomas","last_name":"Krettenauer"}],"title":"Die Forderung nach Lebenslangem Lernen: Zwischen Banalität, Herausforderung und Zumutung","date_updated":"2022-01-06T06:57:25Z","_id":"26690","page":"37-50","status":"public","type":"book_chapter","year":"2021","language":[{"iso":"ger"}],"publisher":"Lit","publication":"Lebenslanges Lernen in der Musikpädagogik. Theorie und Praxis ","date_created":"2021-10-21T11:53:20Z"},{"volume":35,"page":"141-163","_id":"26697","issue":"2","date_updated":"2022-01-06T06:57:26Z","date_created":"2021-10-21T12:22:29Z","publication":"Empirische Pädagogik","status":"public","language":[{"iso":"ger"}],"year":"2021","type":"journal_article","user_id":"57672","citation":{"short":"M.F. Löper, F. Hellmich, Empirische Pädagogik 35 (2021) 141–163.","mla":"Löper, Marwin Felix, and Frank Hellmich. “Erklärungsfaktoren für Handlungsintentionen von Lehrkräften an inklusiven und nicht-inklusiven Grundschulen bei der Gestaltung von adaptivem Unterricht.” <i>Empirische Pädagogik</i>, vol. 35, no. 2, 2021, pp. 141–63.","bibtex":"@article{Löper_Hellmich_2021, title={Erklärungsfaktoren für Handlungsintentionen von Lehrkräften an inklusiven und nicht-inklusiven Grundschulen bei der Gestaltung von adaptivem Unterricht.}, volume={35}, number={2}, journal={Empirische Pädagogik}, author={Löper, Marwin Felix and Hellmich, Frank}, year={2021}, pages={141–163} }","chicago":"Löper, Marwin Felix, and Frank Hellmich. “Erklärungsfaktoren für Handlungsintentionen von Lehrkräften an inklusiven und nicht-inklusiven Grundschulen bei der Gestaltung von adaptivem Unterricht.” <i>Empirische Pädagogik</i> 35, no. 2 (2021): 141–63.","ieee":"M. F. Löper and F. Hellmich, “Erklärungsfaktoren für Handlungsintentionen von Lehrkräften an inklusiven und nicht-inklusiven Grundschulen bei der Gestaltung von adaptivem Unterricht.,” <i>Empirische Pädagogik</i>, vol. 35, no. 2, pp. 141–163, 2021.","apa":"Löper, M. F., &#38; Hellmich, F. (2021). Erklärungsfaktoren für Handlungsintentionen von Lehrkräften an inklusiven und nicht-inklusiven Grundschulen bei der Gestaltung von adaptivem Unterricht. <i>Empirische Pädagogik</i>, <i>35</i>(2), 141–163.","ama":"Löper MF, Hellmich F. Erklärungsfaktoren für Handlungsintentionen von Lehrkräften an inklusiven und nicht-inklusiven Grundschulen bei der Gestaltung von adaptivem Unterricht. <i>Empirische Pädagogik</i>. 2021;35(2):141-163."},"department":[{"_id":"460"}],"author":[{"full_name":"Löper, Marwin Felix","first_name":"Marwin Felix","last_name":"Löper","id":"26693"},{"id":"26282","last_name":"Hellmich","first_name":"Frank","full_name":"Hellmich, Frank"}],"title":"Erklärungsfaktoren für Handlungsintentionen von Lehrkräften an inklusiven und nicht-inklusiven Grundschulen bei der Gestaltung von adaptivem Unterricht.","intvolume":"        35"},{"date_updated":"2022-01-06T06:57:26Z","_id":"26700","page":"1-15","status":"public","type":"journal_article","year":"2021","publication_identifier":{"issn":["0885-6257","1469-591X"]},"language":[{"iso":"eng"}],"publication":"European Journal of Special Needs Education","date_created":"2021-10-21T12:23:57Z","department":[{"_id":"460"}],"user_id":"57672","publication_status":"published","citation":{"short":"M.F. Löper, S. Schwab, M. Lehofer, F. Hellmich, European Journal of Special Needs Education (2021) 1–15.","mla":"Löper, Marwin Felix, et al. “The Role of Students’ Experiences in Attitude Formation towards Peers with Non-Compliant Classroom Behaviour in Inclusive Primary Schools.” <i>European Journal of Special Needs Education</i>, 2021, pp. 1–15, doi:<a href=\"https://doi.org/10.1080/08856257.2021.1967295\">10.1080/08856257.2021.1967295</a>.","bibtex":"@article{Löper_Schwab_Lehofer_Hellmich_2021, title={The role of students’ experiences in attitude formation towards peers with non-compliant classroom behaviour in inclusive primary schools}, DOI={<a href=\"https://doi.org/10.1080/08856257.2021.1967295\">10.1080/08856257.2021.1967295</a>}, journal={European Journal of Special Needs Education}, author={Löper, Marwin Felix and Schwab, Susanne and Lehofer, Mike and Hellmich, Frank}, year={2021}, pages={1–15} }","chicago":"Löper, Marwin Felix, Susanne Schwab, Mike Lehofer, and Frank Hellmich. “The Role of Students’ Experiences in Attitude Formation towards Peers with Non-Compliant Classroom Behaviour in Inclusive Primary Schools.” <i>European Journal of Special Needs Education</i>, 2021, 1–15. <a href=\"https://doi.org/10.1080/08856257.2021.1967295\">https://doi.org/10.1080/08856257.2021.1967295</a>.","ieee":"M. F. Löper, S. Schwab, M. Lehofer, and F. Hellmich, “The role of students’ experiences in attitude formation towards peers with non-compliant classroom behaviour in inclusive primary schools,” <i>European Journal of Special Needs Education</i>, pp. 1–15, 2021, doi: <a href=\"https://doi.org/10.1080/08856257.2021.1967295\">10.1080/08856257.2021.1967295</a>.","ama":"Löper MF, Schwab S, Lehofer M, Hellmich F. The role of students’ experiences in attitude formation towards peers with non-compliant classroom behaviour in inclusive primary schools. <i>European Journal of Special Needs Education</i>. Published online 2021:1-15. doi:<a href=\"https://doi.org/10.1080/08856257.2021.1967295\">10.1080/08856257.2021.1967295</a>","apa":"Löper, M. F., Schwab, S., Lehofer, M., &#38; Hellmich, F. (2021). The role of students’ experiences in attitude formation towards peers with non-compliant classroom behaviour in inclusive primary schools. <i>European Journal of Special Needs Education</i>, 1–15. <a href=\"https://doi.org/10.1080/08856257.2021.1967295\">https://doi.org/10.1080/08856257.2021.1967295</a>"},"doi":"10.1080/08856257.2021.1967295","author":[{"last_name":"Löper","id":"26693","full_name":"Löper, Marwin Felix","first_name":"Marwin Felix"},{"first_name":"Susanne","full_name":"Schwab, Susanne","last_name":"Schwab"},{"full_name":"Lehofer, Mike","first_name":"Mike","last_name":"Lehofer"},{"first_name":"Frank","full_name":"Hellmich, Frank","id":"26282","last_name":"Hellmich"}],"title":"The role of students’ experiences in attitude formation towards peers with non-compliant classroom behaviour in inclusive primary schools"},{"editor":[{"last_name":"Habig","full_name":"Habig, Sebastian","first_name":"Sebastian"}],"author":[{"last_name":"Pollmeier","id":"44191","first_name":"Pascal","full_name":"Pollmeier, Pascal"},{"id":"54823","last_name":"Fechner","first_name":"Sabine","full_name":"Fechner, Sabine","orcid":"0000-0001-5645-5870"}],"conference":{"location":"virtuell","start_date":"2020-09-14","name":"Jahreskonferenz Gesellschaft für Didaktik der Chemie und Physik","end_date":"2020-09-17"},"title":" Erweiterung des epistemologischen Verständnisses durch Konfrontation mit anomalen Daten.","user_id":"54823","oa":"1","publication_status":"published","main_file_link":[{"url":"https://www.gdcp-ev.de/wp-content/tb2021/TB2021_605_Pollmeier.pdf","open_access":"1"}],"citation":{"chicago":"Pollmeier, Pascal, and Sabine Fechner. “ Erweiterung des epistemologischen Verständnisses durch Konfrontation mit anomalen Daten.” In <i>Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?</i>, edited by Sebastian Habig, 605–8. Universität Duisburg-Essen, 2021.","ieee":"P. Pollmeier and S. Fechner, “ Erweiterung des epistemologischen Verständnisses durch Konfrontation mit anomalen Daten.,” in <i>Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?</i>, virtuell, 2021, pp. 605–608.","ama":"Pollmeier P, Fechner S.  Erweiterung des epistemologischen Verständnisses durch Konfrontation mit anomalen Daten. In: Habig S, ed. <i>Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?</i>. Universität Duisburg-Essen; 2021:605-608.","apa":"Pollmeier, P., &#38; Fechner, S. (2021).  Erweiterung des epistemologischen Verständnisses durch Konfrontation mit anomalen Daten. In S. Habig (Ed.), <i>Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?</i> (pp. 605–608). Universität Duisburg-Essen.","short":"P. Pollmeier, S. Fechner, in: S. Habig (Ed.), Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?, Universität Duisburg-Essen, 2021, pp. 605–608.","mla":"Pollmeier, Pascal, and Sabine Fechner. “ Erweiterung des epistemologischen Verständnisses durch Konfrontation mit anomalen Daten.” <i>Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?</i>, edited by Sebastian Habig, Universität Duisburg-Essen, 2021, pp. 605–08.","bibtex":"@inproceedings{Pollmeier_Fechner_2021, title={ Erweiterung des epistemologischen Verständnisses durch Konfrontation mit anomalen Daten.}, booktitle={Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?}, publisher={Universität Duisburg-Essen}, author={Pollmeier, Pascal and Fechner, Sabine}, editor={Habig, Sebastian}, year={2021}, pages={605–608} }"},"department":[{"_id":"386"}],"publisher":"Universität Duisburg-Essen","publication":"Naturwissenschaftlicher Unterricht und Lehrerbildung im Umbruch?","date_created":"2021-10-22T06:22:43Z","status":"public","year":"2021","type":"conference","language":[{"iso":"ger"}],"page":"605-608","_id":"26718","date_updated":"2022-01-06T06:57:26Z"},{"citation":{"apa":"Wiersema, T. (2021). <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn University.","ama":"Wiersema T. <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn University; 2021.","ieee":"T. Wiersema, <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn: Paderborn University, 2021.","chicago":"Wiersema, Tobias. <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn: Paderborn University, 2021.","bibtex":"@book{Wiersema_2021, place={Paderborn}, title={Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware}, publisher={Paderborn University}, author={Wiersema, Tobias}, year={2021} }","mla":"Wiersema, Tobias. <i>Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware</i>. Paderborn University, 2021.","short":"T. Wiersema, Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware, Paderborn University, Paderborn, 2021."},"publication_status":"published","department":[{"_id":"78"}],"author":[{"id":"3118","last_name":"Wiersema","full_name":"Wiersema, Tobias","first_name":"Tobias"}],"place":"Paderborn","supervisor":[{"full_name":"Platzner, Marco","first_name":"Marco","last_name":"Platzner","id":"398"}],"_id":"26746","date_updated":"2022-01-06T06:57:26Z","date_created":"2021-10-25T06:35:41Z","publisher":"Paderborn University","year":"2021","language":[{"iso":"eng"}],"status":"public","user_id":"3118","oa":"1","main_file_link":[{"open_access":"1","url":"https://nbn-resolving.de/urn:nbn:de:hbz:466:2-39800"}],"keyword":["Proof-Carrying Hardware","Formal Verification","Sequential Circuits","Non-Functional Properties","Functional Properties"],"title":"Guaranteeing Properties of Reconfigurable Hardware Circuits with Proof-Carrying Hardware","project":[{"_id":"1","name":"SFB 901"},{"name":"SFB 901 - Project Area B","_id":"3"},{"_id":"12","name":"SFB 901 - Subproject B4"}],"abstract":[{"lang":"eng","text":"Previous research in proof-carrying hardware has established the feasibility and utility of the approach, and provided a concrete solution for employing it for the certification of functional equivalence checking against a specification, but fell short in connecting it to state-of-the-art formal verification insights, methods and tools. Due to the immense complexity of modern circuits, and verification challenges such as the state explosion problem for sequential circuits, this restriction of readily-available verification solutions severely limited the applicability of the approach in wider contexts.\r\n\r\nThis thesis closes the gap between the PCH approach and current advances in formal hardware verification, provides methods and tools to express and certify a wide range of circuit properties, both functional and non-functional, and presents for the first time prototypes in which circuits that are implemented on actual reconfigurable hardware are verified with PCH methods. Using these results, designers can now apply PCH to establish trust in more complex circuits, by using more diverse properties which they can express using modern, efficient property specification techniques."},{"lang":"ger","text":"Die bisherige Forschung zu Proof-Carrying Hardware (PCH) hat dessen Machbarkeit und Nützlichkeit gezeigt und einen Ansatz zur Zertifizierung der funktionalen Äquivalenz zu einer Spezifikation geliefert, jedoch ohne PCH mit aktuellen Erkenntnissen, Methoden oder Werkzeugen formaler Hardwareverifikation zu verknüpfen. Aufgrund der Komplexität moderner Schaltungen und Verifikationsherausforderungen wie der Zustandsexplosion bei sequentiellen Schaltungen, limitiert diese Einschränkung sofort verfügbarer Verifikationslösungen die Anwendbarkeit des Ansatzes in einem größeren Kontext signifikant.\r\n\r\nDiese Dissertation schließt die Lücke zwischen PCH und modernen Entwicklungen in der Schaltungsverifikation und stellt Methoden und Werkzeuge zur Verfügung, welche die Zertifizierung einer großen Bandbreite von Schaltungseigenschaften ermöglicht; sowohl funktionale, als auch nicht-funktionale. Überdies werden erstmals Prototypen vorgestellt in welchen Schaltungen mittels PCH verifiziert werden, die auf tatsächlicher rekonfigurierbarer Hardware realisiert sind. Dank dieser Ergebnisse können Entwickler PCH zur Herstellung von Vertrauen in weit komplexere Schaltungen verwenden, unter Zuhilfenahme einer größeren Vielfalt von Eigenschaften, welche durch moderne, effiziente Spezifikationstechniken ausgedrückt werden können."}],"page":"293","ddc":["006"],"type":"dissertation"},{"date_updated":"2022-01-06T06:57:27Z","page":"9898","_id":"26759","volume":11,"language":[{"iso":"eng"}],"type":"journal_article","publication_identifier":{"issn":["2076-3417"]},"year":"2021","status":"public","date_created":"2021-10-25T07:48:17Z","publication":"Applied Sciences","department":[{"_id":"302"}],"citation":{"mla":"Garcia Diosa, Jaime Andres, et al. “Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM.” <i>Applied Sciences</i>, vol. 11, 2021, p. 9898, doi:<a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>.","bibtex":"@article{Garcia Diosa_Gonzalez Orive_Grundmeier_Camargo Amado_Keller_2021, title={Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM}, volume={11}, DOI={<a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>}, journal={Applied Sciences}, author={Garcia Diosa, Jaime Andres and Gonzalez Orive, Alejandro and Grundmeier, Guido and Camargo Amado, Ruben Jesus and Keller, Adrian}, year={2021}, pages={9898} }","short":"J.A. Garcia Diosa, A. Gonzalez Orive, G. Grundmeier, R.J. Camargo Amado, A. Keller, Applied Sciences 11 (2021) 9898.","apa":"Garcia Diosa, J. A., Gonzalez Orive, A., Grundmeier, G., Camargo Amado, R. J., &#38; Keller, A. (2021). Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM. <i>Applied Sciences</i>, <i>11</i>, 9898. <a href=\"https://doi.org/10.3390/app11219898\">https://doi.org/10.3390/app11219898</a>","ama":"Garcia Diosa JA, Gonzalez Orive A, Grundmeier G, Camargo Amado RJ, Keller A. Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM. <i>Applied Sciences</i>. 2021;11:9898. doi:<a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>","chicago":"Garcia Diosa, Jaime Andres, Alejandro Gonzalez Orive, Guido Grundmeier, Ruben Jesus Camargo Amado, and Adrian Keller. “Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM.” <i>Applied Sciences</i> 11 (2021): 9898. <a href=\"https://doi.org/10.3390/app11219898\">https://doi.org/10.3390/app11219898</a>.","ieee":"J. A. Garcia Diosa, A. Gonzalez Orive, G. Grundmeier, R. J. Camargo Amado, and A. Keller, “Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM,” <i>Applied Sciences</i>, vol. 11, p. 9898, 2021, doi: <a href=\"https://doi.org/10.3390/app11219898\">10.3390/app11219898</a>."},"publication_status":"published","user_id":"48864","doi":"10.3390/app11219898","intvolume":"        11","abstract":[{"text":"<jats:p>Coatings of modified TiO2 nanoparticles (TiO2-m) have been shown to effectively and selectively trap non-adherent cancer cells, with an enormous potential for applications in photodynamic therapy (PDT). Leukemia cells have a remarkable affinity for TiO2-m coatings, adhering to the surface by membrane structures and exhibiting morphologic characteristics of amoeboid locomotion. However, the details of the cell–substrate interaction induced by the TiO2-m coating remain elusive. With the aim to obtain a better understanding of this phenomenon, leukemia cell adhesion to such coatings was characterized by atomic force microscopy (AFM) for short contact times up to 60 min. The cell and membrane morphological parameters mean cell height, contact area, cell volume, and membrane roughness were determined at different contact times. These results reveal cell expansion and contraction phases occurring during the initial stage of adhesion. Subsequently, the leukemic cells reach what appears to be a new resting state, characterized by pinning of the cell membrane by TiO2-m nanoparticle aggregates protruding from the coating surface.</jats:p>","lang":"eng"}],"title":"Morphological Dynamics of Leukemia Cells on TiO2 Nanoparticle Coatings Studied by AFM","author":[{"full_name":"Garcia Diosa, Jaime Andres","first_name":"Jaime Andres","last_name":"Garcia Diosa"},{"last_name":"Gonzalez Orive","first_name":"Alejandro","full_name":"Gonzalez Orive, Alejandro"},{"first_name":"Guido","full_name":"Grundmeier, Guido","last_name":"Grundmeier","id":"194"},{"last_name":"Camargo Amado","full_name":"Camargo Amado, Ruben Jesus","first_name":"Ruben Jesus"},{"orcid":"0000-0001-7139-3110","first_name":"Adrian","full_name":"Keller, Adrian","id":"48864","last_name":"Keller"}]},{"user_id":"15782","publication_status":"published","citation":{"mla":"Kharatyan, Aschot, et al. “Towards Generative Design in the Development of Mechatronic Integrated Devices (MID).” <i>Procedia CIRP</i>, vol. Vol. 100, 2021, pp. 373–78.","bibtex":"@inproceedings{Kharatyan_Jürgenhake_Dumitrescu_2021, title={Towards generative design in the development of mechatronic integrated devices (MID)}, volume={Vol. 100}, booktitle={Procedia CIRP}, author={Kharatyan, Aschot and Jürgenhake, Christoph and Dumitrescu, Roman}, year={2021}, pages={373–378} }","short":"A. Kharatyan, C. Jürgenhake, R. Dumitrescu, in: Procedia CIRP, 2021, pp. 373–378.","ama":"Kharatyan A, Jürgenhake C, Dumitrescu R. Towards generative design in the development of mechatronic integrated devices (MID). In: <i>Procedia CIRP</i>. Vol Vol. 100. ; 2021:373-378.","apa":"Kharatyan, A., Jürgenhake, C., &#38; Dumitrescu, R. (2021). Towards generative design in the development of mechatronic integrated devices (MID). <i>Procedia CIRP</i>, <i>Vol. 100</i>, 373–378.","chicago":"Kharatyan, Aschot, Christoph Jürgenhake, and Roman Dumitrescu. “Towards Generative Design in the Development of Mechatronic Integrated Devices (MID).” In <i>Procedia CIRP</i>, Vol. 100:373–78, 2021.","ieee":"A. Kharatyan, C. Jürgenhake, and R. Dumitrescu, “Towards generative design in the development of mechatronic integrated devices (MID),” in <i>Procedia CIRP</i>, 2021, vol. Vol. 100, pp. 373–378."},"department":[{"_id":"563"}],"author":[{"last_name":"Kharatyan","full_name":"Kharatyan, Aschot","first_name":"Aschot"},{"last_name":"Jürgenhake","first_name":"Christoph","full_name":"Jürgenhake, Christoph"},{"last_name":"Dumitrescu","id":"16190","first_name":"Roman","full_name":"Dumitrescu, Roman"}],"conference":{"name":"31st CIRP Design Conference","start_date":"2021-05-19","end_date":"2021-05-21"},"title":"Towards generative design in the development of mechatronic integrated devices (MID)","volume":"Vol. 100","_id":"26823","page":"373-378","date_updated":"2022-01-06T06:57:29Z","publication":"Procedia CIRP","date_created":"2021-10-25T12:18:36Z","status":"public","year":"2021","type":"conference","language":[{"iso":"eng"}]},{"language":[{"iso":"eng"}],"year":"2021","type":"conference","status":"public","date_created":"2021-10-25T12:24:20Z","publication":"14th International Congress Molded Interconnect Devices (MID)","date_updated":"2022-01-06T06:57:29Z","_id":"26830","page":"1-9","title":"Approach for a modular design methodology for an efficient development of 3D MID components","conference":{"location":"Amberg","start_date":"2021-02-9","name":"International Congress Molded Interconnect Devices (MID)","end_date":"2021-02-10"},"author":[{"last_name":"Mager","full_name":"Mager, Thomas","first_name":"Thomas"},{"last_name":"Jürgenhake","full_name":"Jürgenhake, Christoph","first_name":"Christoph"},{"id":"16190","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","first_name":"Roman"}],"department":[{"_id":"563"}],"citation":{"ieee":"T. Mager, C. Jürgenhake, and R. Dumitrescu, “Approach for a modular design methodology for an efficient development of 3D MID components,” in <i>14th International Congress Molded Interconnect Devices (MID)</i>, Amberg, 2021, pp. 1–9.","chicago":"Mager, Thomas, Christoph Jürgenhake, and Roman Dumitrescu. “Approach for a Modular Design Methodology for an Efficient Development of 3D MID Components.” In <i>14th International Congress Molded Interconnect Devices (MID)</i>, 1–9, 2021.","ama":"Mager T, Jürgenhake C, Dumitrescu R. Approach for a modular design methodology for an efficient development of 3D MID components. In: <i>14th International Congress Molded Interconnect Devices (MID)</i>. ; 2021:1-9.","apa":"Mager, T., Jürgenhake, C., &#38; Dumitrescu, R. (2021). Approach for a modular design methodology for an efficient development of 3D MID components. <i>14th International Congress Molded Interconnect Devices (MID)</i>, 1–9.","short":"T. Mager, C. Jürgenhake, R. Dumitrescu, in: 14th International Congress Molded Interconnect Devices (MID), 2021, pp. 1–9.","bibtex":"@inproceedings{Mager_Jürgenhake_Dumitrescu_2021, title={Approach for a modular design methodology for an efficient development of 3D MID components}, booktitle={14th International Congress Molded Interconnect Devices (MID)}, author={Mager, Thomas and Jürgenhake, Christoph and Dumitrescu, Roman}, year={2021}, pages={1–9} }","mla":"Mager, Thomas, et al. “Approach for a Modular Design Methodology for an Efficient Development of 3D MID Components.” <i>14th International Congress Molded Interconnect Devices (MID)</i>, 2021, pp. 1–9."},"publication_status":"published","user_id":"15782"},{"department":[{"_id":"563"}],"citation":{"short":"F. Hemmelgarn, P. Ehlert, T. Mager, C. Jürgenhake, R. Dumitrescu, in: 14th International Congress Molded Interconnect Devices (MID), 2021.","mla":"Hemmelgarn, Florian, et al. “Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications.” <i>14th International Congress Molded Interconnect Devices (MID)</i>, 2021.","bibtex":"@inproceedings{Hemmelgarn_Ehlert_Mager_Jürgenhake_Dumitrescu_2021, title={Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications}, booktitle={14th International Congress Molded Interconnect Devices (MID)}, author={Hemmelgarn, Florian and Ehlert, Patrick and Mager, Thomas and Jürgenhake, Christoph and Dumitrescu, Roman}, year={2021} }","chicago":"Hemmelgarn, Florian, Patrick Ehlert, Thomas Mager, Christoph Jürgenhake, and Roman Dumitrescu. “Evaluation of Different Additive Manufacturing Technologies for MIDs in the Context of Smart Sensor Systems for Retrofit Applications.” In <i>14th International Congress Molded Interconnect Devices (MID)</i>, 2021.","ieee":"F. Hemmelgarn, P. Ehlert, T. Mager, C. Jürgenhake, and R. Dumitrescu, “Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications,” presented at the International Congress Molded Interconnect Devices (MID), Amberg, 2021.","apa":"Hemmelgarn, F., Ehlert, P., Mager, T., Jürgenhake, C., &#38; Dumitrescu, R. (2021). Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. <i>14th International Congress Molded Interconnect Devices (MID)</i>. International Congress Molded Interconnect Devices (MID), Amberg.","ama":"Hemmelgarn F, Ehlert P, Mager T, Jürgenhake C, Dumitrescu R. Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications. In: <i>14th International Congress Molded Interconnect Devices (MID)</i>. ; 2021."},"publication_status":"published","user_id":"15782","title":"Evaluation of different additive manufacturing technologies for MIDs in the context of smart sensor systems for retrofit applications","conference":{"location":"Amberg","start_date":"2021-02-9","name":"International Congress Molded Interconnect Devices (MID)","end_date":"2021-02-10"},"author":[{"last_name":"Hemmelgarn","full_name":"Hemmelgarn, Florian","first_name":"Florian"},{"last_name":"Ehlert","first_name":"Patrick","full_name":"Ehlert, Patrick"},{"last_name":"Mager","first_name":"Thomas","full_name":"Mager, Thomas"},{"full_name":"Jürgenhake, Christoph","first_name":"Christoph","last_name":"Jürgenhake"},{"id":"16190","last_name":"Dumitrescu","first_name":"Roman","full_name":"Dumitrescu, Roman"}],"date_updated":"2022-01-06T06:57:29Z","_id":"26833","language":[{"iso":"eng"}],"type":"conference","year":"2021","status":"public","date_created":"2021-10-25T12:27:28Z","publication":"14th International Congress Molded Interconnect Devices (MID)"},{"status":"public","year":"2021","type":"conference","language":[{"iso":"eng"}],"publication":"Procedia CIRP","date_created":"2021-10-25T12:35:16Z","date_updated":"2022-01-06T06:57:29Z","volume":"vol. 100","page":"708-713","_id":"26839","author":[{"full_name":"Menzefricke, Jörn Steffen","first_name":"Jörn Steffen","id":"29799","last_name":"Menzefricke"},{"last_name":"Wiederkehr","id":"38169","full_name":"Wiederkehr, Ingrid","first_name":"Ingrid"},{"full_name":"Koldewey, Christian","first_name":"Christian","last_name":"Koldewey","id":"43136","orcid":"https://orcid.org/0000-0001-7992-6399"},{"last_name":"Dumitrescu","id":"16190","full_name":"Dumitrescu, Roman","first_name":"Roman"}],"conference":{"end_date":"2021-05-21","name":"31st CIRP Design Conference","start_date":"2021-05-19"},"title":"Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches","department":[{"_id":"563"}],"user_id":"15782","publication_status":"published","citation":{"mla":"Menzefricke, Jörn Steffen, et al. “Socio-Technical Risk Management in the Age of Digital Transformation – Identification and Analysis of Existing Approaches.” <i>Procedia CIRP</i>, vol. 100, 2021, pp. 708–13.","bibtex":"@inproceedings{Menzefricke_Wiederkehr_Koldewey_Dumitrescu_2021, title={Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches}, volume={100}, booktitle={Procedia CIRP}, author={Menzefricke, Jörn Steffen and Wiederkehr, Ingrid and Koldewey, Christian and Dumitrescu, Roman}, year={2021}, pages={708–713} }","short":"J.S. Menzefricke, I. Wiederkehr, C. Koldewey, R. Dumitrescu, in: Procedia CIRP, 2021, pp. 708–713.","apa":"Menzefricke, J. S., Wiederkehr, I., Koldewey, C., &#38; Dumitrescu, R. (2021). Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches. <i>Procedia CIRP</i>, <i>100</i>, 708–713.","ama":"Menzefricke JS, Wiederkehr I, Koldewey C, Dumitrescu R. Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches. In: <i>Procedia CIRP</i>. Vol 100. ; 2021:708-713.","chicago":"Menzefricke, Jörn Steffen, Ingrid Wiederkehr, Christian Koldewey, and Roman Dumitrescu. “Socio-Technical Risk Management in the Age of Digital Transformation – Identification and Analysis of Existing Approaches.” In <i>Procedia CIRP</i>, 100:708–13, 2021.","ieee":"J. S. Menzefricke, I. Wiederkehr, C. Koldewey, and R. Dumitrescu, “Socio-technical risk management in the age of digital transformation – identification and analysis of existing approaches,” in <i>Procedia CIRP</i>, 2021, vol. 100, pp. 708–713."}},{"publication_status":"published","user_id":"15782","citation":{"mla":"Schnasse, Felix, et al. “Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector.” <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 2021, pp. 159–66.","bibtex":"@inproceedings{Schnasse_Menzefricke_Dumitrescu_2021, title={Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector}, booktitle={Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)}, author={Schnasse, Felix and Menzefricke, Jörn Steffen and Dumitrescu, Roman}, year={2021}, pages={159–166} }","short":"F. Schnasse, J.S. Menzefricke, R. Dumitrescu, in: Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021, pp. 159–166.","ama":"Schnasse F, Menzefricke JS, Dumitrescu R. Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector. In: <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>. ; 2021:159-166.","apa":"Schnasse, F., Menzefricke, J. S., &#38; Dumitrescu, R. (2021). Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector. <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 159–166.","chicago":"Schnasse, Felix, Jörn Steffen Menzefricke, and Roman Dumitrescu. “Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector.” In <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 159–66, 2021.","ieee":"F. Schnasse, J. S. Menzefricke, and R. Dumitrescu, “Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector,” in <i>Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)</i>, 2021, pp. 159–166."},"department":[{"_id":"563"}],"author":[{"full_name":"Schnasse, Felix","first_name":"Felix","last_name":"Schnasse"},{"full_name":"Menzefricke, Jörn Steffen","first_name":"Jörn Steffen","last_name":"Menzefricke","id":"29799"},{"last_name":"Dumitrescu","id":"16190","first_name":"Roman","full_name":"Dumitrescu, Roman"}],"title":"Identification of Socio-Technical Risks and Their Correlations in the Context of Digital Transformation for the Manufacturing Sector","conference":{"end_date":"2021-04-26","start_date":"2021-04-23","name":"IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)"},"page":"159 - 166","_id":"26843","date_updated":"2022-01-06T06:57:29Z","date_created":"2021-10-25T12:53:11Z","publication":"Proceedings of the IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA)","status":"public","language":[{"iso":"eng"}],"type":"conference","year":"2021"},{"date_updated":"2022-01-06T06:57:29Z","page":"187-192","_id":"26850","year":"2021","type":"conference","language":[{"iso":"eng"}],"status":"public","publication":"Procedia CIRP","date_created":"2021-10-25T13:07:32Z","department":[{"_id":"563"}],"citation":{"bibtex":"@inproceedings{Japs_Anacker_Dumitrescu_2021, title={SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry}, booktitle={Procedia CIRP}, author={Japs, Sergej and Anacker, Harald and Dumitrescu, Roman}, year={2021}, pages={187–192} }","mla":"Japs, Sergej, et al. “SAVE: Security &#38; Safety by Model-Based Systems Engineering on the Example of Automotive Industry.” <i>Procedia CIRP</i>, 2021, pp. 187–92.","short":"S. Japs, H. Anacker, R. Dumitrescu, in: Procedia CIRP, 2021, pp. 187–192.","ama":"Japs S, Anacker H, Dumitrescu R. SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry. In: <i>Procedia CIRP</i>. ; 2021:187-192.","apa":"Japs, S., Anacker, H., &#38; Dumitrescu, R. (2021). SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry. <i>Procedia CIRP</i>, 187–192.","ieee":"S. Japs, H. Anacker, and R. Dumitrescu, “SAVE: Security &#38; safety by model-based systems engineering on the example of automotive industry,” in <i>Procedia CIRP</i>, 2021, pp. 187–192.","chicago":"Japs, Sergej, Harald Anacker, and Roman Dumitrescu. “SAVE: Security &#38; Safety by Model-Based Systems Engineering on the Example of Automotive Industry.” In <i>Procedia CIRP</i>, 187–92, 2021."},"user_id":"15782","publication_status":"published","conference":{"name":"31st CIRP Design Conference","start_date":"2021-05-19","end_date":"2021-05-21"},"title":"SAVE: Security & safety by model-based systems engineering on the example of automotive industry","author":[{"last_name":"Japs","full_name":"Japs, Sergej","first_name":"Sergej"},{"full_name":"Anacker, Harald","first_name":"Harald","last_name":"Anacker"},{"last_name":"Dumitrescu","id":"16190","full_name":"Dumitrescu, Roman","first_name":"Roman"}]},{"publisher":"Heinz Nixdorf Institut, Universität Paderborn","publication":"Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung","date_created":"2021-10-25T13:32:30Z","status":"public","year":"2021","type":"conference","language":[{"iso":"ger"}],"_id":"26851","date_updated":"2022-01-06T06:57:29Z","editor":[{"last_name":"Gausemeier","full_name":"Gausemeier, Jürgen","first_name":"Jürgen"},{"last_name":"Bauer","full_name":"Bauer, Wilhelm","first_name":"Wilhelm"},{"full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu"}],"author":[{"full_name":"Dumitrescu, Roman","first_name":"Roman","last_name":"Dumitrescu","id":"16190"},{"last_name":"Anacker","full_name":"Anacker, Harald","first_name":"Harald"},{"last_name":"Grote","first_name":"Eva-Maria","full_name":"Grote, Eva-Maria"},{"last_name":"Rasor","full_name":"Rasor, Rik","first_name":"Rik"},{"full_name":"Tekaat, Julian","first_name":"Julian","last_name":"Tekaat"},{"orcid":"0000-0003-0606-7321","full_name":"Meyer, Maurice","first_name":"Maurice","id":"77201","last_name":"Meyer"},{"first_name":"Jürgen","full_name":"Gausemeier, Jürgen","last_name":"Gausemeier","id":"163"},{"first_name":"Steffen","full_name":"Steglich, Steffen","last_name":"Steglich"}],"conference":{"end_date":"2021-12-03","start_date":"2021-12-02","location":"Berlin","name":"16. Symposium für Vorausschau und Technologieplanung"},"title":"Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering","place":"Paderborn","user_id":"15782","publication_status":"published","citation":{"bibtex":"@inproceedings{Dumitrescu_Anacker_Grote_Rasor_Tekaat_Meyer_Gausemeier_Steglich_2021, place={Paderborn}, title={Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering}, booktitle={Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung}, publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Dumitrescu, Roman and Anacker, Harald and Grote, Eva-Maria and Rasor, Rik and Tekaat, Julian and Meyer, Maurice and Gausemeier, Jürgen and Steglich, Steffen}, editor={Gausemeier, Jürgen and Bauer, Wilhelm and Dumitrescu, Roman}, year={2021} }","mla":"Dumitrescu, Roman, et al. “Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering.” <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2021.","short":"R. Dumitrescu, H. Anacker, E.-M. Grote, R. Rasor, J. Tekaat, M. Meyer, J. Gausemeier, S. Steglich, in: J. Gausemeier, W. Bauer, R. Dumitrescu (Eds.), Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2021.","ama":"Dumitrescu R, Anacker H, Grote E-M, et al. Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering. In: Gausemeier J, Bauer W, Dumitrescu R, eds. <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>. Heinz Nixdorf Institut, Universität Paderborn; 2021.","apa":"Dumitrescu, R., Anacker, H., Grote, E.-M., Rasor, R., Tekaat, J., Meyer, M., Gausemeier, J., &#38; Steglich, S. (2021). Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering. In J. Gausemeier, W. Bauer, &#38; R. Dumitrescu (Eds.), <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>. Heinz Nixdorf Institut, Universität Paderborn.","ieee":"R. Dumitrescu <i>et al.</i>, “Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering,” in <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, Berlin, 2021.","chicago":"Dumitrescu, Roman, Harald Anacker, Eva-Maria Grote, Rik Rasor, Julian Tekaat, Maurice Meyer, Jürgen Gausemeier, and Steffen Steglich. “Erfolgspotentiale für die Zukunft des Engineeringstandorts Deutschland – Ein Beitrag zum Advanced Systems Engineering.” In <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier, Wilhelm Bauer, and Roman Dumitrescu. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2021."},"department":[{"_id":"563"}]},{"title":"Metamodel for safety and security integrated system architecture modeling","conference":{"end_date":"2020-05-21","name":"16th International Design Conference","location":"Cavtat, Dubrovnik, Croatia","start_date":"2020-05-18"},"author":[{"last_name":"Kharatyan","full_name":"Kharatyan, Aschot","first_name":"Aschot"},{"last_name":"Tekaat","full_name":"Tekaat, Julian","first_name":"Julian"},{"last_name":"Japs","full_name":"Japs, Sergej","first_name":"Sergej"},{"full_name":"Anacker, Harald","first_name":"Harald","last_name":"Anacker"},{"first_name":"Roman","full_name":"Dumitrescu, Roman","last_name":"Dumitrescu","id":"16190"}],"department":[{"_id":"563"}],"citation":{"ieee":"A. Kharatyan, J. Tekaat, S. Japs, H. Anacker, and R. Dumitrescu, “Metamodel for safety and security integrated system architecture modeling,” in <i> Proceedings of the Design Society</i>, Cavtat, Dubrovnik, Croatia, 2021, vol. Vol. 1, pp. 2027–2036.","chicago":"Kharatyan, Aschot, Julian Tekaat, Sergej Japs, Harald Anacker, and Roman Dumitrescu. “Metamodel for Safety and Security Integrated System Architecture Modeling.” In <i> Proceedings of the Design Society</i>, Vol. 1:2027–36, 2021.","ama":"Kharatyan A, Tekaat J, Japs S, Anacker H, Dumitrescu R. Metamodel for safety and security integrated system architecture modeling. In: <i> Proceedings of the Design Society</i>. Vol Vol. 1. ; 2021:2027-2036.","apa":"Kharatyan, A., Tekaat, J., Japs, S., Anacker, H., &#38; Dumitrescu, R. (2021). Metamodel for safety and security integrated system architecture modeling. <i> Proceedings of the Design Society</i>, <i>Vol. 1</i>, 2027–2036.","short":"A. Kharatyan, J. Tekaat, S. Japs, H. Anacker, R. Dumitrescu, in:  Proceedings of the Design Society, 2021, pp. 2027–2036.","bibtex":"@inproceedings{Kharatyan_Tekaat_Japs_Anacker_Dumitrescu_2021, title={Metamodel for safety and security integrated system architecture modeling}, volume={Vol. 1}, booktitle={ Proceedings of the Design Society}, author={Kharatyan, Aschot and Tekaat, Julian and Japs, Sergej and Anacker, Harald and Dumitrescu, Roman}, year={2021}, pages={2027–2036} }","mla":"Kharatyan, Aschot, et al. “Metamodel for Safety and Security Integrated System Architecture Modeling.” <i> Proceedings of the Design Society</i>, vol. Vol. 1, 2021, pp. 2027–36."},"publication_status":"published","user_id":"15782","language":[{"iso":"eng"}],"year":"2021","type":"conference","status":"public","date_created":"2021-10-25T13:40:50Z","publication":" Proceedings of the Design Society","date_updated":"2022-01-06T06:57:29Z","page":"2027 - 2036","_id":"26852","volume":"Vol. 1"},{"doi":"10.1017/pds.2021.590","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>Cyber-physical systems (CPS) are able the collect huge amounts of data about themselves, their users, and their environment during their usage phase. By feeding these usage data back into product planning, manufacturers can optimize their engineering and decision-making processes. Despite promising potentials, most manufacturers still do not analyze usage data within product planning. Also, research on usage data-driven product planning is scarce. Therefore, this paper aims to identify the main concepts, advantages, success factors and challenges of usage data-driven product planning. To answer the corresponding research questions, a comprehensive systematic literature review is conducted. From its results, a detailed description of usage data-driven product planning consisting of six main concepts is derived. Furthermore, taxonomies for the advantages, success factors and challenges of usage data-driven product planning are presented. The six main concepts and the three taxonomies allow for a deeper understanding of the topic while highlighting necessary future actions and research needs.</jats:p>","lang":"eng"}],"title":"UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW","author":[{"orcid":"0000-0003-0606-7321","full_name":"Meyer, Maurice","first_name":"Maurice","id":"77201","last_name":"Meyer"},{"last_name":"Wiederkehr","id":"38169","first_name":"Ingrid","full_name":"Wiederkehr, Ingrid"},{"orcid":"https://orcid.org/0000-0001-7992-6399","id":"43136","last_name":"Koldewey","first_name":"Christian","full_name":"Koldewey, Christian"},{"full_name":"Dumitrescu, Roman","first_name":"Roman","id":"16190","last_name":"Dumitrescu"}],"department":[{"_id":"563"}],"citation":{"apa":"Meyer, M., Wiederkehr, I., Koldewey, C., &#38; Dumitrescu, R. (2021). UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW. <i>Proceedings of the Design Society</i>, 3289–3298. <a href=\"https://doi.org/10.1017/pds.2021.590\">https://doi.org/10.1017/pds.2021.590</a>","ama":"Meyer M, Wiederkehr I, Koldewey C, Dumitrescu R. UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW. <i>Proceedings of the Design Society</i>. Published online 2021:3289-3298. doi:<a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>","ieee":"M. Meyer, I. Wiederkehr, C. Koldewey, and R. Dumitrescu, “UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW,” <i>Proceedings of the Design Society</i>, pp. 3289–3298, 2021, doi: <a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>.","chicago":"Meyer, Maurice, Ingrid Wiederkehr, Christian Koldewey, and Roman Dumitrescu. “UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW.” <i>Proceedings of the Design Society</i>, 2021, 3289–98. <a href=\"https://doi.org/10.1017/pds.2021.590\">https://doi.org/10.1017/pds.2021.590</a>.","bibtex":"@article{Meyer_Wiederkehr_Koldewey_Dumitrescu_2021, title={UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW}, DOI={<a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>}, journal={Proceedings of the Design Society}, author={Meyer, Maurice and Wiederkehr, Ingrid and Koldewey, Christian and Dumitrescu, Roman}, year={2021}, pages={3289–3298} }","mla":"Meyer, Maurice, et al. “UNDERSTANDING USAGE DATA-DRIVEN PRODUCT PLANNING: A SYSTEMATIC LITERATURE REVIEW.” <i>Proceedings of the Design Society</i>, 2021, pp. 3289–98, doi:<a href=\"https://doi.org/10.1017/pds.2021.590\">10.1017/pds.2021.590</a>.","short":"M. Meyer, I. Wiederkehr, C. Koldewey, R. Dumitrescu, Proceedings of the Design Society (2021) 3289–3298."},"publication_status":"published","user_id":"43136","language":[{"iso":"eng"}],"type":"journal_article","publication_identifier":{"issn":["2732-527X"]},"year":"2021","status":"public","date_created":"2021-10-25T14:43:11Z","publication":"Proceedings of the Design Society","date_updated":"2022-01-06T06:57:29Z","_id":"26855","page":"3289-3298"},{"title":"Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis","conference":{"end_date":"2021-12-03","name":"16. Symposium für Vorausschau und Technologieplanung","start_date":"2021-12-02","location":"Berlin"},"author":[{"orcid":"0000-0003-0606-7321","id":"77201","last_name":"Meyer","full_name":"Meyer, Maurice","first_name":"Maurice"},{"last_name":"Hemkentokrax","id":"76057","first_name":"Jan-Philipp","full_name":"Hemkentokrax, Jan-Philipp"},{"orcid":"https://orcid.org/0000-0001-7992-6399","last_name":"Koldewey","id":"43136","full_name":"Koldewey, Christian","first_name":"Christian"},{"id":"16190","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","first_name":"Roman"},{"full_name":"Tröster, Peter M.","first_name":"Peter M.","last_name":"Tröster"},{"last_name":"Schlegel","first_name":"Michael","full_name":"Schlegel, Michael"},{"full_name":"Kling, Christopher L.","first_name":"Christopher L.","last_name":"Kling"},{"full_name":"Rapp, Simon","first_name":"Simon","last_name":"Rapp"},{"full_name":"Albers, Albert","first_name":"Albert","last_name":"Albers"}],"editor":[{"first_name":"Jürgen","full_name":"Gausemeier, Jürgen","last_name":"Gausemeier"},{"full_name":"Bauer, Wilhelm","first_name":"Wilhelm","last_name":"Bauer"},{"last_name":"Dumitrescu","first_name":"Roman","full_name":"Dumitrescu, Roman"}],"place":"Paderborn","intvolume":"       400","citation":{"chicago":"Meyer, Maurice, Jan-Philipp Hemkentokrax, Christian Koldewey, Roman Dumitrescu, Peter M. Tröster, Michael Schlegel, Christopher L. Kling, Simon Rapp, and Albert Albers. “Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis.” In <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier, Wilhelm Bauer, and Roman Dumitrescu, Vol. 400. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2021.","ieee":"M. Meyer <i>et al.</i>, “Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis,” in <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, Berlin, 2021, vol. 400.","ama":"Meyer M, Hemkentokrax J-P, Koldewey C, et al. Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis. In: Gausemeier J, Bauer W, Dumitrescu R, eds. <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>. Vol 400. Heinz Nixdorf Institut, Universität Paderborn; 2021.","apa":"Meyer, M., Hemkentokrax, J.-P., Koldewey, C., Dumitrescu, R., Tröster, P. M., Schlegel, M., Kling, C. L., Rapp, S., &#38; Albers, A. (2021). Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis. In J. Gausemeier, W. Bauer, &#38; R. Dumitrescu (Eds.), <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i> (Vol. 400). Heinz Nixdorf Institut, Universität Paderborn.","short":"M. Meyer, J.-P. Hemkentokrax, C. Koldewey, R. Dumitrescu, P.M. Tröster, M. Schlegel, C.L. Kling, S. Rapp, A. Albers, in: J. Gausemeier, W. Bauer, R. Dumitrescu (Eds.), Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2021.","mla":"Meyer, Maurice, et al. “Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis.” <i>Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung</i>, edited by Jürgen Gausemeier et al., vol. 400, Heinz Nixdorf Institut, Universität Paderborn, 2021.","bibtex":"@inproceedings{Meyer_Hemkentokrax_Koldewey_Dumitrescu_Tröster_Schlegel_Kling_Rapp_Albers_2021, place={Paderborn}, title={Zukunftsrobuste Weiterentwicklung von Produktportfolios: Erkenntnisse und Handlungsbedarfe aus der Praxis}, volume={400}, booktitle={Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung}, publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Meyer, Maurice and Hemkentokrax, Jan-Philipp and Koldewey, Christian and Dumitrescu, Roman and Tröster, Peter M. and Schlegel, Michael and Kling, Christopher L. and Rapp, Simon and Albers, Albert}, editor={Gausemeier, Jürgen and Bauer, Wilhelm and Dumitrescu, Roman}, year={2021} }"},"publication_status":"published","user_id":"15782","department":[{"_id":"563"}],"date_created":"2021-10-25T14:50:27Z","publication":"Vorausschau und Technologieplanung - 16. Symposium Vorausschau und Technologieplanung","publisher":"Heinz Nixdorf Institut, Universität Paderborn","language":[{"iso":"ger"}],"type":"conference","year":"2021","status":"public","_id":"26857","volume":400,"date_updated":"2022-01-06T06:57:29Z"},{"status":"public","language":[{"iso":"eng"}],"year":"2021","type":"journal_article","date_created":"2021-10-25T14:56:55Z","publication":"Procedia CIRP","date_updated":"2022-01-06T06:57:29Z","volume":104,"_id":"26858","page":"1179-1184","intvolume":"       104","author":[{"orcid":"0000-0003-0606-7321","full_name":"Meyer, Maurice","first_name":"Maurice","id":"77201","last_name":"Meyer"},{"first_name":"Melina","full_name":"Panzner, Melina","last_name":"Panzner"},{"full_name":"Koldewey, Christian","first_name":"Christian","last_name":"Koldewey","id":"43136","orcid":"https://orcid.org/0000-0001-7992-6399"},{"last_name":"Dumitrescu","id":"16190","full_name":"Dumitrescu, Roman","first_name":"Roman"}],"title":"Towards Identifying Data Analytics Use Cases in Product Planning","department":[{"_id":"563"}],"user_id":"77201","citation":{"ama":"Meyer M, Panzner M, Koldewey C, Dumitrescu R. Towards Identifying Data Analytics Use Cases in Product Planning. <i>Procedia CIRP</i>. 2021;104:1179-1184.","apa":"Meyer, M., Panzner, M., Koldewey, C., &#38; Dumitrescu, R. (2021). Towards Identifying Data Analytics Use Cases in Product Planning. <i>Procedia CIRP</i>, <i>104</i>, 1179–1184.","ieee":"M. Meyer, M. Panzner, C. Koldewey, and R. Dumitrescu, “Towards Identifying Data Analytics Use Cases in Product Planning,” <i>Procedia CIRP</i>, vol. 104, pp. 1179–1184, 2021.","chicago":"Meyer, Maurice, Melina Panzner, Christian Koldewey, and Roman Dumitrescu. “Towards Identifying Data Analytics Use Cases in Product Planning.” <i>Procedia CIRP</i> 104 (2021): 1179–84.","bibtex":"@article{Meyer_Panzner_Koldewey_Dumitrescu_2021, title={Towards Identifying Data Analytics Use Cases in Product Planning}, volume={104}, journal={Procedia CIRP}, author={Meyer, Maurice and Panzner, Melina and Koldewey, Christian and Dumitrescu, Roman}, year={2021}, pages={1179–1184} }","mla":"Meyer, Maurice, et al. “Towards Identifying Data Analytics Use Cases in Product Planning.” <i>Procedia CIRP</i>, vol. 104, 2021, pp. 1179–84.","short":"M. Meyer, M. Panzner, C. Koldewey, R. Dumitrescu, Procedia CIRP 104 (2021) 1179–1184."}}]