---
_id: '64660'
author:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Neukötter M, Jesinghausen S, Schmid H-J. Polymer Suspensions under Uniaxial
Extension – A novel Way to Produce Core-Shell-Particles? . In: ; 2025.'
apa: Neukötter, M., Jesinghausen, S., & Schmid, H.-J. (2025). Polymer Suspensions
under Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? .
PARTEC | International Congress on Particle Technology, Nürnberg.
bibtex: '@inproceedings{Neukötter_Jesinghausen_Schmid_2025, title={Polymer Suspensions
under Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? }, author={Neukötter,
Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2025} }'
chicago: Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Polymer
Suspensions under Uniaxial Extension – A Novel Way to Produce Core-Shell-Particles?
,” 2025.
ieee: M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Polymer Suspensions under
Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? ,” presented
at the PARTEC | International Congress on Particle Technology, Nürnberg, 2025.
mla: Neukötter, Moritz, et al. Polymer Suspensions under Uniaxial Extension –
A Novel Way to Produce Core-Shell-Particles? . 2025.
short: 'M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2025.'
conference:
end_date: 2025-09-25
location: Nürnberg
name: PARTEC | International Congress on Particle Technology
start_date: 2025-09-23
date_created: 2026-02-26T09:04:54Z
date_updated: 2026-03-11T14:48:24Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
status: public
title: 'Polymer Suspensions under Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? '
type: conference_abstract
user_id: '45530'
year: '2025'
...
---
_id: '65011'
abstract:
- lang: eng
text: "Abstract\r\n Design of
single screw machines for polymer processing often focuses on the melt dominated
areas of the screw. However, solids conveying is a key aspect for processes with
high screw speeds, grooved feed sections, small screw diameters and material with
low bulk density. In injection moulding, throughput limitations are highly relevant
in packaging applications as due to low cooling times, plasticizing affects the
cycle time. In addition, insufficient solids conveying is a primary cause for
air residues in the melt and final product. Therefore, well-designed feed sections
are required, especially as direct processing of regrind in recycling applications
becomes more relevant due to governmental restrictions. Existing models for injection
moulding are based on analytical equations and do not allow to assess new feed
sections and feed opening designs, adapted to high screw speeds or regrind. In
this paper, numerical simulations based on the Discrete Element Method (DEM),
previously used in the field of extrusion, are carried out. In order to replicate
the cyclic, superimposed rotation and translation of the screw, a coupled approach
of DEM and Multibody Systems Simulation (MBS) is pursued. To verify the accuracy
of such coupled simulations, a special test setup is added to a conventional injection
moulding machine. Pure solids conveying is investigated, as DEM does not accommodate
for large plastic deformations or melting. Different screw and intake designs
as well as smooth and grooved barrels are investigated. Selected resins, pellet
shapes and regrind are processed, varying the processing parameters and comparing
the results to the simulation. The coupled approach replicates reality well in
terms of throughput, confirming that DEM can be utilised to further investigate
process phenomena and develop calculation models for solids conveying in injection
moulding."
author:
- first_name: Jan
full_name: Landgräber, Jan
id: '64499'
last_name: Landgräber
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Landgräber J, Schöppner V, Brüning F. Assessing solids conveying in injection
moulding machines using coupled numerical simulations based on the discrete element
method (DEM) and multibody systems (MBS). International Polymer Processing.
2025;41(1):1-14. doi:10.1515/ipp-2025-0065
apa: Landgräber, J., Schöppner, V., & Brüning, F. (2025). Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS). International Polymer
Processing, 41(1), 1–14. https://doi.org/10.1515/ipp-2025-0065
bibtex: '@article{Landgräber_Schöppner_Brüning_2025, title={Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS)}, volume={41}, DOI={10.1515/ipp-2025-0065}, number={1},
journal={International Polymer Processing}, publisher={Walter de Gruyter GmbH},
author={Landgräber, Jan and Schöppner, Volker and Brüning, Florian}, year={2025},
pages={1–14} }'
chicago: 'Landgräber, Jan, Volker Schöppner, and Florian Brüning. “Assessing Solids
Conveying in Injection Moulding Machines Using Coupled Numerical Simulations Based
on the Discrete Element Method (DEM) and Multibody Systems (MBS).” International
Polymer Processing 41, no. 1 (2025): 1–14. https://doi.org/10.1515/ipp-2025-0065.'
ieee: 'J. Landgräber, V. Schöppner, and F. Brüning, “Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS),” International Polymer
Processing, vol. 41, no. 1, pp. 1–14, 2025, doi: 10.1515/ipp-2025-0065.'
mla: Landgräber, Jan, et al. “Assessing Solids Conveying in Injection Moulding Machines
Using Coupled Numerical Simulations Based on the Discrete Element Method (DEM)
and Multibody Systems (MBS).” International Polymer Processing, vol. 41,
no. 1, Walter de Gruyter GmbH, 2025, pp. 1–14, doi:10.1515/ipp-2025-0065.
short: J. Landgräber, V. Schöppner, F. Brüning, International Polymer Processing
41 (2025) 1–14.
date_created: 2026-03-16T14:34:08Z
date_updated: 2026-03-16T14:36:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0065
intvolume: ' 41'
issue: '1'
language:
- iso: eng
page: 1-14
publication: International Polymer Processing
publication_identifier:
issn:
- 0930-777X
- 2195-8602
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Assessing solids conveying in injection moulding machines using coupled numerical
simulations based on the discrete element method (DEM) and multibody systems (MBS)
type: journal_article
user_id: '59363'
volume: 41
year: '2025'
...
---
_id: '57545'
author:
- first_name: Beate
full_name: Flath, Beate
id: '58896'
last_name: Flath
orcid: https://orcid.org/0000-0002-1648-0796
- first_name: Christoph
full_name: Jacke, Christoph
id: '20747'
last_name: Jacke
- first_name: Harald
full_name: Schroeter-Wittke, Harald
id: '480'
last_name: Schroeter-Wittke
citation:
ama: 'Flath B, Jacke C, Schroeter-Wittke H. Den Schein werfen/wahren. Transdiziplinaritäten
und Popkulturforschungen. Ein Übersetzungsraum als Partitur . In: Kornbach A,
Lammer C, Magdeburg L, eds. Transdisziplinäre Räume in den Kulturwissenschaften.
Vol 3. Interdisziplinäre Studien des Paderborner Graduiertenzentrums für Kulturwissenschaften.
; 2025:211-254.'
apa: Flath, B., Jacke, C., & Schroeter-Wittke, H. (2025). Den Schein werfen/wahren.
Transdiziplinaritäten und Popkulturforschungen. Ein Übersetzungsraum als Partitur
. In A. Kornbach, C. Lammer, & L. Magdeburg (Eds.), Transdisziplinäre Räume
in den Kulturwissenschaften (Vol. 3, pp. 211–254).
bibtex: '@inbook{Flath_Jacke_Schroeter-Wittke_2025, series={Interdisziplinäre Studien
des Paderborner Graduiertenzentrums für Kulturwissenschaften}, title={Den Schein
werfen/wahren. Transdiziplinaritäten und Popkulturforschungen. Ein Übersetzungsraum
als Partitur }, volume={3}, booktitle={Transdisziplinäre Räume in den Kulturwissenschaften},
author={Flath, Beate and Jacke, Christoph and Schroeter-Wittke, Harald}, editor={Kornbach,
Alina and Lammer, Christina and Magdeburg, Lena}, year={2025}, pages={211–254},
collection={Interdisziplinäre Studien des Paderborner Graduiertenzentrums für
Kulturwissenschaften} }'
chicago: Flath, Beate, Christoph Jacke, and Harald Schroeter-Wittke. “Den Schein
werfen/wahren. Transdiziplinaritäten und Popkulturforschungen. Ein Übersetzungsraum
als Partitur .” In Transdisziplinäre Räume in den Kulturwissenschaften,
edited by Alina Kornbach, Christina Lammer, and Lena Magdeburg, 3:211–54. Interdisziplinäre
Studien des Paderborner Graduiertenzentrums für Kulturwissenschaften, 2025.
ieee: B. Flath, C. Jacke, and H. Schroeter-Wittke, “Den Schein werfen/wahren. Transdiziplinaritäten
und Popkulturforschungen. Ein Übersetzungsraum als Partitur ,” in Transdisziplinäre
Räume in den Kulturwissenschaften, vol. 3, A. Kornbach, C. Lammer, and L.
Magdeburg, Eds. 2025, pp. 211–254.
mla: Flath, Beate, et al. “Den Schein werfen/wahren. Transdiziplinaritäten und Popkulturforschungen.
Ein Übersetzungsraum als Partitur .” Transdisziplinäre Räume in den Kulturwissenschaften,
edited by Alina Kornbach et al., vol. 3, 2025, pp. 211–54.
short: 'B. Flath, C. Jacke, H. Schroeter-Wittke, in: A. Kornbach, C. Lammer, L.
Magdeburg (Eds.), Transdisziplinäre Räume in den Kulturwissenschaften, 2025, pp.
211–254.'
date_created: 2024-12-03T05:44:20Z
date_updated: 2026-03-17T09:46:47Z
department:
- _id: '36'
- _id: '817'
- _id: '607'
editor:
- first_name: 'Alina '
full_name: 'Kornbach, Alina '
last_name: Kornbach
- first_name: 'Christina '
full_name: 'Lammer, Christina '
last_name: Lammer
- first_name: Lena
full_name: Magdeburg, Lena
last_name: Magdeburg
intvolume: ' 3'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.herder.de/wissen/shop/p8/90093-transdisziplinaere-raeume-in-den-kulturwissenschaften-open-access-pdf/
oa: '1'
page: 211-254
publication: Transdisziplinäre Räume in den Kulturwissenschaften
publication_identifier:
isbn:
- 978-3-534-64164-2
publication_status: published
related_material:
link:
- relation: confirmation
url: https://www.herder.de/wissen/shop/p8/90093-transdisziplinaere-raeume-in-den-kulturwissenschaften-open-access-pdf/
series_title: Interdisziplinäre Studien des Paderborner Graduiertenzentrums für Kulturwissenschaften
status: public
title: 'Den Schein werfen/wahren. Transdiziplinaritäten und Popkulturforschungen.
Ein Übersetzungsraum als Partitur '
type: book_chapter
user_id: '20747'
volume: 3
year: '2025'
...
---
_id: '65018'
abstract:
- lang: eng
text: "Android applications collecting data from users must protect it according
to the current legal frameworks. Such data protection has become even more important
since in 2018 the European Union rolled out the General Data Protection Regulation
(GDPR). Since app developers are not legal experts, they find it difficult to
integrate privacy-aware practices into source code development. Despite these
legal obligations, developers have limited tool support to reason about data protection
throughout their app development process.\r\n This paper explores the use of
static program slicing and software visualization to analyze privacy-relevant
data flows in Android apps. We introduce SliceViz, a web tool that analyzes an
Android app by slicing all privacy-relevant data sources detected in the source
code on the back-end. It then helps developers by visualizing these privacy-relevant
program slices.\r\n We conducted a user study with 12 participants demonstrating
that SliceViz effectively aids developers in identifying privacy-relevant properties
in Android apps.\r\n Our findings indicate that program slicing can be employed
to identify and reason about privacy-relevant data flows in Android applications.
With further usability improvements, developers can be better equipped to handle
privacy-sensitive information."
author:
- first_name: Mugdha
full_name: Khedkar, Mugdha
id: '88024'
last_name: Khedkar
- first_name: Michael
full_name: Schlichtig, Michael
id: '32312'
last_name: Schlichtig
orcid: 0000-0001-6600-6171
- first_name: Santhosh
full_name: Mohan, Santhosh
last_name: Mohan
- first_name: Eric
full_name: Bodden, Eric
id: '59256'
last_name: Bodden
orcid: 0000-0003-3470-3647
citation:
ama: Khedkar M, Schlichtig M, Mohan S, Bodden E. Visualizing Privacy-Relevant Data
Flows in Android Applications. arXiv:250316640. Published online 2025.
apa: Khedkar, M., Schlichtig, M., Mohan, S., & Bodden, E. (2025). Visualizing
Privacy-Relevant Data Flows in Android Applications. In arXiv:2503.16640.
bibtex: '@article{Khedkar_Schlichtig_Mohan_Bodden_2025, title={Visualizing Privacy-Relevant
Data Flows in Android Applications}, journal={arXiv:2503.16640}, author={Khedkar,
Mugdha and Schlichtig, Michael and Mohan, Santhosh and Bodden, Eric}, year={2025}
}'
chicago: Khedkar, Mugdha, Michael Schlichtig, Santhosh Mohan, and Eric Bodden. “Visualizing
Privacy-Relevant Data Flows in Android Applications.” ArXiv:2503.16640,
2025.
ieee: M. Khedkar, M. Schlichtig, S. Mohan, and E. Bodden, “Visualizing Privacy-Relevant
Data Flows in Android Applications,” arXiv:2503.16640. 2025.
mla: Khedkar, Mugdha, et al. “Visualizing Privacy-Relevant Data Flows in Android
Applications.” ArXiv:2503.16640, 2025.
short: M. Khedkar, M. Schlichtig, S. Mohan, E. Bodden, ArXiv:2503.16640 (2025).
date_created: 2026-03-16T17:39:12Z
date_updated: 2026-03-16T17:40:56Z
department:
- _id: '76'
external_id:
arxiv:
- '2503.16640'
language:
- iso: eng
publication: arXiv:2503.16640
status: public
title: Visualizing Privacy-Relevant Data Flows in Android Applications
type: preprint
user_id: '32312'
year: '2025'
...
---
_id: '60991'
author:
- first_name: Christoph
full_name: Jacke, Christoph
id: '20747'
last_name: Jacke
- first_name: Harald
full_name: Schroeter-Wittke, Harald
last_name: Schroeter-Wittke
citation:
ama: 'Jacke C, Schroeter-Wittke H. Pop-Ikonen. Kulturwissenschaftliche Zugänge.
In: Lerke S, Luthe S, Pinsch JC, Sengelmann J, eds. Popmix, POPkultur und Religion:
The Next Generation. 1st ed. Springer Fachmedien Wiesbaden; 2025:195-201.
doi:10.1007/978-3-658-47990-9'
apa: 'Jacke, C., & Schroeter-Wittke, H. (2025). Pop-Ikonen. Kulturwissenschaftliche
Zugänge. In S. Lerke, S. Luthe, J. C. Pinsch, & J. Sengelmann (Eds.), Popmix,
POPkultur und Religion: The Next Generation (1st ed., pp. 195–201). Springer
Fachmedien Wiesbaden. https://doi.org/10.1007/978-3-658-47990-9'
bibtex: '@inbook{Jacke_Schroeter-Wittke_2025, place={Wiesbaden}, edition={1}, title={Pop-Ikonen.
Kulturwissenschaftliche Zugänge.}, DOI={10.1007/978-3-658-47990-9},
booktitle={Popmix, POPkultur und Religion: The Next Generation}, publisher={Springer
Fachmedien Wiesbaden}, author={Jacke, Christoph and Schroeter-Wittke, Harald},
editor={Lerke, Stephanie and Luthe, Simon and Pinsch, Jan Christian and Sengelmann,
Julian}, year={2025}, pages={195–201} }'
chicago: 'Jacke, Christoph, and Harald Schroeter-Wittke. “Pop-Ikonen. Kulturwissenschaftliche
Zugänge.” In Popmix, POPkultur und Religion: The Next Generation, edited
by Stephanie Lerke, Simon Luthe, Jan Christian Pinsch, and Julian Sengelmann,
1st ed., 195–201. Wiesbaden: Springer Fachmedien Wiesbaden, 2025. https://doi.org/10.1007/978-3-658-47990-9.'
ieee: 'C. Jacke and H. Schroeter-Wittke, “Pop-Ikonen. Kulturwissenschaftliche Zugänge.,”
in Popmix, POPkultur und Religion: The Next Generation, 1st ed., S. Lerke,
S. Luthe, J. C. Pinsch, and J. Sengelmann, Eds. Wiesbaden: Springer Fachmedien
Wiesbaden, 2025, pp. 195–201.'
mla: 'Jacke, Christoph, and Harald Schroeter-Wittke. “Pop-Ikonen. Kulturwissenschaftliche
Zugänge.” Popmix, POPkultur und Religion: The Next Generation, edited by
Stephanie Lerke et al., 1st ed., Springer Fachmedien Wiesbaden, 2025, pp. 195–201,
doi:10.1007/978-3-658-47990-9.'
short: 'C. Jacke, H. Schroeter-Wittke, in: S. Lerke, S. Luthe, J.C. Pinsch, J. Sengelmann
(Eds.), Popmix, POPkultur und Religion: The Next Generation, 1st ed., Springer
Fachmedien Wiesbaden, Wiesbaden, 2025, pp. 195–201.'
date_created: 2025-08-24T17:21:14Z
date_updated: 2026-03-17T09:42:03Z
department:
- _id: '817'
- _id: '607'
doi: 10.1007/978-3-658-47990-9
edition: '1'
editor:
- first_name: Stephanie
full_name: Lerke, Stephanie
last_name: Lerke
- first_name: Simon
full_name: Luthe, Simon
last_name: Luthe
- first_name: Jan Christian
full_name: Pinsch, Jan Christian
last_name: Pinsch
- first_name: Julian
full_name: Sengelmann, Julian
last_name: Sengelmann
language:
- iso: ger
page: 195-201
place: Wiesbaden
publication: 'Popmix, POPkultur und Religion: The Next Generation'
publication_identifier:
isbn:
- '9783658479893'
- '9783658479909'
issn:
- 2569-880X
- 2569-8818
publication_status: published
publisher: Springer Fachmedien Wiesbaden
status: public
title: Pop-Ikonen. Kulturwissenschaftliche Zugänge.
type: book_chapter
user_id: '20747'
year: '2025'
...
---
_id: '61823'
article_type: original
author:
- first_name: Christoph
full_name: Jacke, Christoph
id: '20747'
last_name: Jacke
citation:
ama: Jacke C. Die drei Rollen der Star-Figur. Sarah Connors Abrechnung. POP Kultur
& Kritik. 2025;(27):96-101.
apa: Jacke, C. (2025). Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.
POP. Kultur & Kritik, 27, 96–101.
bibtex: '@article{Jacke_2025, title={Die drei Rollen der Star-Figur. Sarah Connors
Abrechnung.}, number={27}, journal={POP. Kultur & Kritik}, publisher={Transcript},
author={Jacke, Christoph}, year={2025}, pages={96–101} }'
chicago: 'Jacke, Christoph. “Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.”
POP. Kultur & Kritik, no. 27 (2025): 96–101.'
ieee: C. Jacke, “Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.,” POP.
Kultur & Kritik, no. 27, pp. 96–101, 2025.
mla: Jacke, Christoph. “Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.”
POP. Kultur & Kritik, no. 27, Transcript, 2025, pp. 96–101.
short: C. Jacke, POP. Kultur & Kritik (2025) 96–101.
date_created: 2025-10-14T09:39:14Z
date_updated: 2026-03-17T09:40:49Z
department:
- _id: '607'
- _id: '817'
issue: '27'
keyword:
- Stars
- Sarah Connor
- Rollen
- Qualitätsjournalismus
- Boulevard
- Fans
language:
- iso: ger
page: 96-101
publication: POP. Kultur & Kritik
publication_status: published
publisher: Transcript
quality_controlled: '1'
status: public
title: Die drei Rollen der Star-Figur. Sarah Connors Abrechnung.
type: journal_article
user_id: '20747'
year: '2025'
...
---
_id: '60566'
article_number: '074402'
author:
- first_name: Adriana
full_name: Bocchini, Adriana
id: '58349'
last_name: Bocchini
orcid: 0000-0002-2134-3075
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Laura
full_name: Bollmers, Laura
id: '61375'
last_name: Bollmers
- first_name: Sebastian
full_name: Lengeling, Sebastian
id: '44373'
last_name: Lengeling
- first_name: Philipp
full_name: Mues, Philipp
id: '49772'
last_name: Mues
orcid: 0000-0003-0643-7636
- first_name: Laura
full_name: Padberg, Laura
id: '40300'
last_name: Padberg
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
citation:
ama: 'Bocchini A, Rüsing M, Bollmers L, et al. Mg dopants in lithium niobate: Defect
models and impact on domain inversion. Physical Review Materials. 2025;9(7).
doi:10.1103/5wz1-bjyr'
apa: 'Bocchini, A., Rüsing, M., Bollmers, L., Lengeling, S., Mues, P., Padberg,
L., Gerstmann, U., Silberhorn, C., Eigner, C., & Schmidt, W. G. (2025). Mg
dopants in lithium niobate: Defect models and impact on domain inversion. Physical
Review Materials, 9(7), Article 074402. https://doi.org/10.1103/5wz1-bjyr'
bibtex: '@article{Bocchini_Rüsing_Bollmers_Lengeling_Mues_Padberg_Gerstmann_Silberhorn_Eigner_Schmidt_2025,
title={Mg dopants in lithium niobate: Defect models and impact on domain inversion},
volume={9}, DOI={10.1103/5wz1-bjyr},
number={7074402}, journal={Physical Review Materials}, publisher={American Physical
Society (APS)}, author={Bocchini, Adriana and Rüsing, Michael and Bollmers, Laura
and Lengeling, Sebastian and Mues, Philipp and Padberg, Laura and Gerstmann, Uwe
and Silberhorn, Christine and Eigner, Christof and Schmidt, Wolf Gero}, year={2025}
}'
chicago: 'Bocchini, Adriana, Michael Rüsing, Laura Bollmers, Sebastian Lengeling,
Philipp Mues, Laura Padberg, Uwe Gerstmann, Christine Silberhorn, Christof Eigner,
and Wolf Gero Schmidt. “Mg Dopants in Lithium Niobate: Defect Models and Impact
on Domain Inversion.” Physical Review Materials 9, no. 7 (2025). https://doi.org/10.1103/5wz1-bjyr.'
ieee: 'A. Bocchini et al., “Mg dopants in lithium niobate: Defect models
and impact on domain inversion,” Physical Review Materials, vol. 9, no.
7, Art. no. 074402, 2025, doi: 10.1103/5wz1-bjyr.'
mla: 'Bocchini, Adriana, et al. “Mg Dopants in Lithium Niobate: Defect Models and
Impact on Domain Inversion.” Physical Review Materials, vol. 9, no. 7,
074402, American Physical Society (APS), 2025, doi:10.1103/5wz1-bjyr.'
short: A. Bocchini, M. Rüsing, L. Bollmers, S. Lengeling, P. Mues, L. Padberg, U.
Gerstmann, C. Silberhorn, C. Eigner, W.G. Schmidt, Physical Review Materials 9
(2025).
date_created: 2025-07-09T09:13:24Z
date_updated: 2026-03-17T17:50:06Z
ddc:
- '530'
department:
- _id: '15'
- _id: '623'
- _id: '295'
- _id: '790'
- _id: '288'
- _id: '230'
- _id: '429'
- _id: '35'
- _id: '170'
- _id: '169'
- _id: '27'
doi: 10.1103/5wz1-bjyr
file:
- access_level: open_access
content_type: application/pdf
creator: adrianab
date_created: 2025-07-09T09:18:45Z
date_updated: 2025-07-10T06:43:34Z
file_id: '60567'
file_name: Mg_dopants_LN_PRM.pdf
file_size: 4175120
relation: main_file
file_date_updated: 2025-07-10T06:43:34Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '7'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.aps.org/doi/10.1103/5wz1-bjyr
oa: '1'
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '53'
name: 'TRR 142: TRR 142 - Maßgeschneiderte nichtlineare Photonik: Von grundlegenden
Konzepten zu funktionellen Strukturen'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '54'
name: 'TRR 142 - A: TRR 142 - Project Area A'
- _id: '168'
name: 'TRR 142 - B07: TRR 142 - Polaronen-Einfluss auf die optischen Eigenschaften
von Lithiumniobat (B07*)'
- _id: '166'
name: 'TRR 142 - A11: TRR 142 - Subproject A11'
publication: Physical Review Materials
publication_identifier:
issn:
- 2475-9953
publication_status: published
publisher: American Physical Society (APS)
status: public
title: 'Mg dopants in lithium niobate: Defect models and impact on domain inversion'
type: journal_article
user_id: '22501'
volume: 9
year: '2025'
...
---
_id: '65038'
abstract:
- lang: eng
text: The rapid advancements in digital transformation have led to the emergence
of dataspaces as a pivotal element for industry-wide and cross-industry data integration
and interoperability across various businesses. Despite their potential, the adoption
and effective utilization of dataspaces by business stakeholders remain challenging.
This paper aims to address this gap by developing a comprehensive learning environment
tailored for business stakeholders. Through an interview study and an analysis
of the current state of research, we identify problem fields and derive key requirements
for the development of the learning environment. The proposed environment includes
a demonstrator and a training concept designed to enhance stakeholders' understanding
and capabilities in managing and leveraging dataspaces. Our findings contribute
to the body of knowledge by providing practical guidance through learning environments
for the deployment of dataspaces in business contexts and highlighting areas for
future research.
author:
- first_name: Jonas
full_name: Lick, Jonas
last_name: Lick
- first_name: Jessica
full_name: Lamarz, Jessica
last_name: Lamarz
- first_name: Friederike
full_name: Dohmann, Friederike
last_name: Dohmann
- first_name: Pranav Jayant
full_name: Kulkarni, Pranav Jayant
id: '86782'
last_name: Kulkarni
- first_name: Julian
full_name: Zerbin, Julian
id: '51711'
last_name: Zerbin
- first_name: Christian
full_name: Koldewey, Christian
id: '43136'
last_name: Koldewey
orcid: https://orcid.org/0000-0001-7992-6399
citation:
ama: 'Lick J, Lamarz J, Dohmann F, Kulkarni PJ, Zerbin J, Koldewey C. Guidance on
Dataspaces: Development of a Learning Environment for Industrial SMEs. In: 2024
6th International Conference on Control and Robotics (ICCR). IEEE; 2025. doi:10.1109/iccr64365.2024.10927580'
apa: 'Lick, J., Lamarz, J., Dohmann, F., Kulkarni, P. J., Zerbin, J., & Koldewey,
C. (2025). Guidance on Dataspaces: Development of a Learning Environment for Industrial
SMEs. 2024 6th International Conference on Control and Robotics (ICCR).
6th International Conference on Control and Robotics (ICCR), Yokohama, Japan .
https://doi.org/10.1109/iccr64365.2024.10927580'
bibtex: '@inproceedings{Lick_Lamarz_Dohmann_Kulkarni_Zerbin_Koldewey_2025, title={Guidance
on Dataspaces: Development of a Learning Environment for Industrial SMEs}, DOI={10.1109/iccr64365.2024.10927580},
booktitle={2024 6th International Conference on Control and Robotics (ICCR)},
publisher={IEEE}, author={Lick, Jonas and Lamarz, Jessica and Dohmann, Friederike
and Kulkarni, Pranav Jayant and Zerbin, Julian and Koldewey, Christian}, year={2025}
}'
chicago: 'Lick, Jonas, Jessica Lamarz, Friederike Dohmann, Pranav Jayant Kulkarni,
Julian Zerbin, and Christian Koldewey. “Guidance on Dataspaces: Development of
a Learning Environment for Industrial SMEs.” In 2024 6th International Conference
on Control and Robotics (ICCR). IEEE, 2025. https://doi.org/10.1109/iccr64365.2024.10927580.'
ieee: 'J. Lick, J. Lamarz, F. Dohmann, P. J. Kulkarni, J. Zerbin, and C. Koldewey,
“Guidance on Dataspaces: Development of a Learning Environment for Industrial
SMEs,” presented at the 6th International Conference on Control and Robotics (ICCR),
Yokohama, Japan , 2025, doi: 10.1109/iccr64365.2024.10927580.'
mla: 'Lick, Jonas, et al. “Guidance on Dataspaces: Development of a Learning Environment
for Industrial SMEs.” 2024 6th International Conference on Control and Robotics
(ICCR), IEEE, 2025, doi:10.1109/iccr64365.2024.10927580.'
short: 'J. Lick, J. Lamarz, F. Dohmann, P.J. Kulkarni, J. Zerbin, C. Koldewey, in:
2024 6th International Conference on Control and Robotics (ICCR), IEEE, 2025.'
conference:
end_date: 2024-12-07
location: 'Yokohama, Japan '
name: 6th International Conference on Control and Robotics (ICCR)
start_date: 2024-12-05
date_created: 2026-03-18T07:13:35Z
date_updated: 2026-03-18T07:18:48Z
department:
- _id: '563'
doi: 10.1109/iccr64365.2024.10927580
language:
- iso: eng
publication: 2024 6th International Conference on Control and Robotics (ICCR)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: 'Guidance on Dataspaces: Development of a Learning Environment for Industrial
SMEs'
type: conference
user_id: '51711'
year: '2025'
...
---
_id: '64984'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Benjamin
full_name: Klie, Benjamin
last_name: Klie
- first_name: Ulrich
full_name: Giese, Ulrich
last_name: Giese
citation:
ama: 'Löhr F, Moritzer E, Klie B, Giese U. Untersuchung von Kombinationen aus Duroplasten
und Elastomeren für den einstufigen 2K-Spritzgießprozess. In: Technomer 2025
- 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren. Vol 29. Fachtagung
über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität
Chemnitz 06. bis 07. November 2025. ; 2025:25.'
apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Untersuchung von
Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess.
In Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren:
Vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025 (p. 25).'
bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Untersuchung von Kombinationen
aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess}, volume={29.
Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische
Universität Chemnitz 06. bis 07. November 2025}, booktitle={Technomer 2025 - 29.
Fachtagung über Verarbeitung und Anwendung von Polymeren}, author={Löhr, Florian
and Moritzer, Elmar and Klie, Benjamin and Giese, Ulrich}, year={2025}, pages={25}
}'
chicago: Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Untersuchung
von Kombinationen Aus Duroplasten Und Elastomeren Für Den Einstufigen 2K-Spritzgießprozess.”
In Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren,
29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische
Universität Chemnitz 06. bis 07. November 2025:25, 2025.
ieee: F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Untersuchung von Kombinationen
aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess,” in
Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren,
vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025, 2025, p. 25.
mla: Löhr, Florian, et al. “Untersuchung von Kombinationen Aus Duroplasten Und Elastomeren
Für Den Einstufigen 2K-Spritzgießprozess.” Technomer 2025 - 29. Fachtagung
Über Verarbeitung Und Anwendung von Polymeren, vol. 29. Fachtagung über Verarbeitung
und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis
07. November 2025, 2025, p. 25.
short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: Technomer 2025 - 29. Fachtagung
Über Verarbeitung Und Anwendung von Polymeren, 2025, p. 25.'
conference:
name: Technomer 2025
date_created: 2026-03-16T12:20:49Z
date_updated: 2026-03-18T09:06:05Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
keyword:
- BMC
- Duroplast
- Kautschuk
- Mehrkomponenten
- Spritzgießen
language:
- iso: eng
page: '25'
publication: Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren
status: public
title: Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen
2K-Spritzgießprozess
type: book_chapter
user_id: '59363'
volume: 29. Fachtagung über Verarbeitung und Anwendung von Polymeren -Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025
year: '2025'
...
---
_id: '64993'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
citation:
ama: 'Löhr F. Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk
im 2K-Spritzgießprozess. In: AZuR-Kolloquium 2025. ; 2025.'
apa: Löhr, F. (2025). Direkthaftung statt Klebstoff –Verbund von Duroplasten und
Kautschuk im 2K-Spritzgießprozess. AZuR-Kolloquium 2025.
bibtex: '@inproceedings{Löhr_2025, title={Direkthaftung statt Klebstoff –Verbund
von Duroplasten und Kautschuk im 2K-Spritzgießprozess}, booktitle={AZuR-Kolloquium
2025}, author={Löhr, Florian}, year={2025} }'
chicago: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten
Und Kautschuk Im 2K-Spritzgießprozess.” In AZuR-Kolloquium 2025, 2025.
ieee: F. Löhr, “Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk
im 2K-Spritzgießprozess,” 2025.
mla: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten Und
Kautschuk Im 2K-Spritzgießprozess.” AZuR-Kolloquium 2025, 2025.
short: 'F. Löhr, in: AZuR-Kolloquium 2025, 2025.'
date_created: 2026-03-16T13:51:45Z
date_updated: 2026-03-18T08:47:01Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
language:
- iso: eng
publication: AZuR-Kolloquium 2025
status: public
title: Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '64983'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Benjamin
full_name: Klie, Benjamin
last_name: Klie
- first_name: Ulrich
full_name: Giese, Ulrich
last_name: Giese
citation:
ama: 'Löhr F, Moritzer E, Klie B, Giese U. Thermoset–Rubber 2K Composite Systems:
Material Combinations and Interfacial Reactions in a One-Step Injection Molding
Process. In: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract
Book. ; 2025:227–228.'
apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process. In International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book (pp. 227–228).'
bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process}, booktitle={International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin
and Giese, Ulrich}, year={2025}, pages={227–228} }'
chicago: 'Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process.” In International Rubber Conference (IRC) 2025,
Bangkok, BITEC; e-Abstract Book, 227–228, 2025.'
ieee: 'F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process,” in International Rubber Conference (IRC) 2025, Bangkok, BITEC;
e-abstract book, 2025, pp. 227–228.'
mla: 'Löhr, Florian, et al. “Thermoset–Rubber 2K Composite Systems: Material Combinations
and Interfacial Reactions in a One-Step Injection Molding Process.” International
Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: International Rubber Conference
(IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
conference:
name: International Rubber Conference IRC 2025
date_created: 2026-03-16T12:20:49Z
date_updated: 2026-03-18T09:07:10Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
keyword:
- BMC
- Duroplast
- Kautschuk
- Mehrkomponenten
- Spritzgießen
language:
- iso: eng
page: 227–228
publication: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract
book
quality_controlled: '1'
status: public
title: 'Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial
Reactions in a One-Step Injection Molding Process'
type: book_chapter
user_id: '59363'
year: '2025'
...
---
_id: '65007'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Knaup F, Schöppner V. Improvement of a numerical two-phase simulation model
for single-screw plasticizing extruders based on experimental investigations.
International Polymer Processing. Published online 2025. doi:10.1515/ipp-2025-0072
apa: Knaup, F., & Schöppner, V. (2025). Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations. International Polymer Processing. https://doi.org/10.1515/ipp-2025-0072
bibtex: '@article{Knaup_Schöppner_2025, title={Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations}, DOI={10.1515/ipp-2025-0072},
journal={International Polymer Processing}, author={Knaup, Felix and Schöppner,
Volker}, year={2025} }'
chicago: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase
Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental
Investigations.” International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0072.
ieee: 'F. Knaup and V. Schöppner, “Improvement of a numerical two-phase simulation
model for single-screw plasticizing extruders based on experimental investigations,”
International Polymer Processing, 2025, doi: 10.1515/ipp-2025-0072.'
mla: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation
Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.”
International Polymer Processing, 2025, doi:10.1515/ipp-2025-0072.
short: F. Knaup, V. Schöppner, International Polymer Processing (2025).
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:17:45Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0072
keyword:
- CFD simulation
- melting modeling
- melting process
- polymer extrusion
- single-screw extruder
language:
- iso: eng
publication: International Polymer Processing
quality_controlled: '1'
status: public
title: Improvement of a numerical two-phase simulation model for single-screw plasticizing
extruders based on experimental investigations
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65005'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Florian
full_name: Brüning, Florian
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knaup F, Brüning F, Schöppner V. Improving an Analytical Model of Melting
in Single Screw Extruders considering the Delay Zone Length. In: Annual Technical
Conference of the Society of Plastics Engineers (ANTEC 2025). ; 2025.'
apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length.
Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025).
bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length},
booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025}
}'
chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Improving an Analytical
Model of Melting in Single Screw Extruders Considering the Delay Zone Length.”
In Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025), 2025.
ieee: F. Knaup, F. Brüning, and V. Schöppner, “Improving an Analytical Model of
Melting in Single Screw Extruders considering the Delay Zone Length,” 2025.
mla: Knaup, Felix, et al. “Improving an Analytical Model of Melting in Single Screw
Extruders Considering the Delay Zone Length.” Annual Technical Conference of
the Society of Plastics Engineers (ANTEC 2025), 2025.
short: 'F. Knaup, F. Brüning, V. Schöppner, in: Annual Technical Conference of the
Society of Plastics Engineers (ANTEC 2025), 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:23:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Aufschmelzen
- Aufschmelzmodellierung
- delay zone
- extrusion
- melting modeling
language:
- iso: eng
publication: Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)
quality_controlled: '1'
status: public
title: Improving an Analytical Model of Melting in Single Screw Extruders considering
the Delay Zone Length
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65006'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knaup F, Brüning F, Schöppner V. Bestimmung der Feststoffbettfestigkeit zur
Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. In: Technomer
2025 29. Fachtagung. ; 2025.'
apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. Technomer
2025 29. Fachtagung.
bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder}, booktitle={Technomer
2025 29. Fachtagung}, author={Knaup, Felix and Brüning, Florian and Schöppner,
Volker}, year={2025} }'
chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder.” In Technomer
2025 29. Fachtagung, 2025.
ieee: F. Knaup, F. Brüning, and V. Schöppner, “Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder,” 2025.
mla: Knaup, Felix, et al. “Bestimmung der Feststoffbettfestigkeit zur Vorhersage
von Feststoffbettbrüchen im Einschneckenextruder.” Technomer 2025 29. Fachtagung,
2025.
short: 'F. Knaup, F. Brüning, V. Schöppner, in: Technomer 2025 29. Fachtagung, 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:11:44Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Aufschmelzen
- Aufschmelzmodellierung
- Feststoffbett
- melting modeling
language:
- iso: ger
publication: Technomer 2025 29. Fachtagung
publication_identifier:
isbn:
- 978-3-939382-17-1
status: public
title: Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen
im Einschneckenextruder
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65003'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Kleinschmidt D, Schöppner V. Characterization of the wall slip behavior of
filled rubber compounds considering the critical wall shear stress. In: Gummitekniska
Förening S, ed. RubberCon 2025. ; 2025.'
apa: Kleinschmidt, D., & Schöppner, V. (2025). Characterization of the wall
slip behavior of filled rubber compounds considering the critical wall shear stress.
In S. Gummitekniska Förening (Ed.), RubberCon 2025.
bibtex: '@inproceedings{Kleinschmidt_Schöppner_2025, title={Characterization of
the wall slip behavior of filled rubber compounds considering the critical wall
shear stress}, booktitle={RubberCon 2025}, author={Kleinschmidt, Dennis and Schöppner,
Volker}, editor={Gummitekniska Förening, Sveriges}, year={2025} }'
chicago: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall
Slip Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.”
In RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025.
ieee: D. Kleinschmidt and V. Schöppner, “Characterization of the wall slip behavior
of filled rubber compounds considering the critical wall shear stress,” in RubberCon
2025, 2025.
mla: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall Slip
Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.”
RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025.
short: 'D. Kleinschmidt, V. Schöppner, in: S. Gummitekniska Förening (Ed.), RubberCon
2025, 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:10:31Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
editor:
- first_name: Sveriges
full_name: Gummitekniska Förening, Sveriges
last_name: Gummitekniska Förening
keyword:
- Kautschuk
- Rheologie
- Wandgleiten
language:
- iso: eng
publication: RubberCon 2025
status: public
title: Characterization of the wall slip behavior of filled rubber compounds considering
the critical wall shear stress
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65009'
author:
- first_name: Leon
full_name: Schmidt, Leon
id: '63035'
last_name: Schmidt
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: 'Schmidt L, Schöppner V, Brüning F. Findings on pinless screw design for rubber
extrusion. In: Gummitekniska Förening S, Swedish N and F rubber associations,
eds. RubberCon 2025. ; 2025.'
apa: Schmidt, L., Schöppner, V., & Brüning, F. (2025). Findings on pinless screw
design for rubber extrusion. In S. Gummitekniska Förening & N. and F. rubber
associations Swedish (Eds.), RubberCon 2025.
bibtex: '@inproceedings{Schmidt_Schöppner_Brüning_2025, title={Findings on pinless
screw design for rubber extrusion}, booktitle={RubberCon 2025}, author={Schmidt,
Leon and Schöppner, Volker and Brüning, Florian}, editor={Gummitekniska Förening,
Sveriges and Swedish, Norwegian and Finnish rubber associations}, year={2025}
}'
chicago: Schmidt, Leon, Volker Schöppner, and Florian Brüning. “Findings on Pinless
Screw Design for Rubber Extrusion.” In RubberCon 2025, edited by Sveriges
Gummitekniska Förening and Norwegian and Finnish rubber associations Swedish,
2025.
ieee: L. Schmidt, V. Schöppner, and F. Brüning, “Findings on pinless screw design
for rubber extrusion,” in RubberCon 2025, 2025.
mla: Schmidt, Leon, et al. “Findings on Pinless Screw Design for Rubber Extrusion.”
RubberCon 2025, edited by Sveriges Gummitekniska Förening and Norwegian
and Finnish rubber associations Swedish, 2025.
short: 'L. Schmidt, V. Schöppner, F. Brüning, in: S. Gummitekniska Förening, N.
and F. rubber associations Swedish (Eds.), RubberCon 2025, 2025.'
date_created: 2026-03-16T14:23:35Z
date_updated: 2026-03-18T09:08:34Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
editor:
- first_name: Sveriges
full_name: Gummitekniska Förening, Sveriges
last_name: Gummitekniska Förening
- first_name: Norwegian and Finnish rubber associations
full_name: Swedish, Norwegian and Finnish rubber associations
last_name: Swedish
keyword:
- extrusion
- Kautschuk
- Simulation
language:
- iso: eng
publication: RubberCon 2025
status: public
title: Findings on pinless screw design for rubber extrusion
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65008'
author:
- first_name: Leon
full_name: Schmidt, Leon
id: '63035'
last_name: Schmidt
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Schmidt L, Brüning F. Investigation of alternative pinless screw concepts for
rubber extrusion. KGK - Kautschuk Gummi Kunststoffe. 2025;78. Jahrgang(2/25):34–40.
apa: Schmidt, L., & Brüning, F. (2025). Investigation of alternative pinless
screw concepts for rubber extrusion. KGK - Kautschuk Gummi Kunststoffe,
78. Jahrgang(2/25), 34–40.
bibtex: '@article{Schmidt_Brüning_2025, title={Investigation of alternative pinless
screw concepts for rubber extrusion}, volume={78. Jahrgang}, number={2/25}, journal={KGK
- Kautschuk Gummi Kunststoffe}, author={Schmidt, Leon and Brüning, Florian}, year={2025},
pages={34–40} }'
chicago: 'Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless
Screw Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe
78. Jahrgang, no. 2/25 (2025): 34–40.'
ieee: L. Schmidt and F. Brüning, “Investigation of alternative pinless screw concepts
for rubber extrusion,” KGK - Kautschuk Gummi Kunststoffe, vol. 78. Jahrgang,
no. 2/25, pp. 34–40, 2025.
mla: Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless Screw
Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe, vol.
78. Jahrgang, no. 2/25, 2025, pp. 34–40.
short: L. Schmidt, F. Brüning, KGK - Kautschuk Gummi Kunststoffe 78. Jahrgang (2025)
34–40.
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:23:12Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
issue: 2/25
keyword:
- extrusion
- Kautschuk
language:
- iso: eng
page: 34–40
publication: KGK - Kautschuk Gummi Kunststoffe
status: public
title: Investigation of alternative pinless screw concepts for rubber extrusion
type: journal_article
user_id: '59363'
volume: 78. Jahrgang
year: '2025'
...
---
_id: '65000'
author:
- first_name: Felix Paul
full_name: Hanselle, Felix Paul
id: '62320'
last_name: Hanselle
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Hanselle FP, Schöppner V, Brüning F. Consideration of modeled pressure dependent
viscosity data in injection molding simulation. International Polymer Processing.
Published online 2025. doi:10.1515/ipp-2025-0074
apa: Hanselle, F. P., Schöppner, V., & Brüning, F. (2025). Consideration of
modeled pressure dependent viscosity data in injection molding simulation. International
Polymer Processing. https://doi.org/10.1515/ipp-2025-0074
bibtex: '@article{Hanselle_Schöppner_Brüning_2025, title={Consideration of modeled
pressure dependent viscosity data in injection molding simulation}, DOI={10.1515/ipp-2025-0074},
journal={International Polymer Processing}, author={Hanselle, Felix Paul and Schöppner,
Volker and Brüning, Florian}, year={2025} }'
chicago: Hanselle, Felix Paul, Volker Schöppner, and Florian Brüning. “Consideration
of Modeled Pressure Dependent Viscosity Data in Injection Molding Simulation.”
International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0074.
ieee: 'F. P. Hanselle, V. Schöppner, and F. Brüning, “Consideration of modeled pressure
dependent viscosity data in injection molding simulation,” International Polymer
Processing, 2025, doi: 10.1515/ipp-2025-0074.'
mla: Hanselle, Felix Paul, et al. “Consideration of Modeled Pressure Dependent Viscosity
Data in Injection Molding Simulation.” International Polymer Processing,
2025, doi:10.1515/ipp-2025-0074.
short: F.P. Hanselle, V. Schöppner, F. Brüning, International Polymer Processing
(2025).
date_created: 2026-03-16T14:23:33Z
date_updated: 2026-03-18T09:25:09Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0074
keyword:
- Druckabhängigkeit
- Rheologie
- Simulation
- Spritzgießen
- Viskosität
language:
- iso: eng
publication: International Polymer Processing
quality_controlled: '1'
status: public
title: Consideration of modeled pressure dependent viscosity data in injection molding
simulation
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65002'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Kleinschmidt D, Brüning F. Influence of pre-shearing on the rheological properties
of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe. Published
online 2025.
apa: Kleinschmidt, D., & Brüning, F. (2025). Influence of pre-shearing on the
rheological properties of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe.
bibtex: '@article{Kleinschmidt_Brüning_2025, title={Influence of pre-shearing on
the rheological properties of filled rubber compounds}, journal={KGK Kautschuk
Gummi Kunststoffe}, author={Kleinschmidt, Dennis and Brüning, Florian}, year={2025}
}'
chicago: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on
the Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi
Kunststoffe, 2025.
ieee: D. Kleinschmidt and F. Brüning, “Influence of pre-shearing on the rheological
properties of filled rubber compounds,” KGK Kautschuk Gummi Kunststoffe,
2025.
mla: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on the
Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi Kunststoffe,
2025.
short: D. Kleinschmidt, F. Brüning, KGK Kautschuk Gummi Kunststoffe (2025).
date_created: 2026-03-16T14:23:33Z
date_updated: 2026-03-18T09:28:22Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Rheologie
- Viskosität
- Wandgleiten
language:
- iso: eng
publication: KGK Kautschuk Gummi Kunststoffe
quality_controlled: '1'
status: public
title: Influence of pre-shearing on the rheological properties of filled rubber compounds
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65046'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
citation:
ama: 'Kleinschmidt D. Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden. In: Extrusion - Grundlagen
und Praxis. ; 2025.'
apa: Kleinschmidt, D. (2025). Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden. Extrusion - Grundlagen und
Praxis.
bibtex: '@inproceedings{Kleinschmidt_2025, place={Hannover}, title={Beschreibung
des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller
Methoden}, booktitle={Extrusion - Grundlagen und Praxis}, author={Kleinschmidt,
Dennis}, year={2025} }'
chicago: Kleinschmidt, Dennis. “Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden.” In Extrusion - Grundlagen
und Praxis. Hannover, 2025.
ieee: D. Kleinschmidt, “Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden,” 2025.
mla: Kleinschmidt, Dennis. “Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden.” Extrusion - Grundlagen und
Praxis, 2025.
short: 'D. Kleinschmidt, in: Extrusion - Grundlagen und Praxis, Hannover, 2025.'
date_created: 2026-03-18T09:45:57Z
date_updated: 2026-03-18T09:45:59Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
language:
- iso: ger
place: Hannover
publication: Extrusion - Grundlagen und Praxis
status: public
title: Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer
und experimenteller Methoden
type: conference
user_id: '59363'
year: '2025'
...