---
_id: '26014'
abstract:
- lang: eng
text: Whereas initial findings have already identified cortical patterns
accompanying proprioceptive deficiencies in patients after anterior cruciate ligament
reconstruction (ACLR), little is known about compensatory sensorimotor mechanisms
for re-establishing postural control. Therefore, the aim of the present study
was to explore leg dependent patterns of cortical contributions to postural control
in patients 6 weeks following ACLR. A total of 12 patients after ACLR (25.1 ±
3.2 years, 178.1 ± 9.7 cm, 77.5 ± 14.4 kg) and another 12 gender, age, and activity
matched healthy controls participated in this study. All subjects performed 10
× 30 s. single leg stances on each leg, equipped with 64-channel mobile electroencephalography
(EEG). Postural stability was quantified by area of sway and sway velocity. Estimations
of the weighted phase lag index were conducted as a cortical measure of functional
connectivity. The findings showed significant group × leg interactions for increased
functional connectivity in the anterior cruciate ligament (ACL) injured leg, predominantly
including fronto−parietal [F(1, 22)
= 8.41, p ≤ 0.008, η2 = 0.28],
fronto−occipital [F(1, 22) = 4.43,
p ≤ 0.047, η2 = 0.17], parieto−motor
[F(1, 22) = 10.30, p
≤ 0.004, η2 = 0.32], occipito−motor [F(1,
22) = 5.21, p ≤ 0.032, η2
= 0.19], and occipito−parietal [F(1, 22)
= 4.60, p ≤ 0.043, η2 = 0.17]
intra−hemispherical connections in the contralateral hemisphere and occipito−motor
[F(1, 22) = 7.33, p
≤ 0.013, η2 = 0.25] on the ipsilateral hemisphere to the
injured leg. Higher functional connectivity in patients after ACLR, attained by
increased emphasis of functional connections incorporating the somatosensory and
visual areas, may serve as a compensatory mechanism to control postural stability
of the injured leg in the early phase of rehabilitation. These preliminary results
may help to develop new neurophysiological assessments for detecting functional
deficiencies after ACLR in the future.
author:
- first_name: Tim
full_name: Lehmann, Tim
last_name: Lehmann
- first_name: Daniel
full_name: Büchel, Daniel
id: '41088'
last_name: Büchel
- first_name: Caroline
full_name: Mouton, Caroline
last_name: Mouton
- first_name: Alli
full_name: Gokeler, Alli
last_name: Gokeler
- first_name: Romain
full_name: Seil, Romain
last_name: Seil
- first_name: Jochen
full_name: Baumeister, Jochen
id: '46'
last_name: Baumeister
orcid: 0000-0003-2683-5826
citation:
ama: Lehmann T, Büchel D, Mouton C, Gokeler A, Seil R, Baumeister J. Functional
Cortical Connectivity Related to Postural Control in Patients Six Weeks After
Anterior Cruciate Ligament Reconstruction. Frontiers in Human Neuroscience.
Published online 2021. doi:10.3389/fnhum.2021.655116
apa: Lehmann, T., Büchel, D., Mouton, C., Gokeler, A., Seil, R., & Baumeister,
J. (2021). Functional Cortical Connectivity Related to Postural Control in Patients
Six Weeks After Anterior Cruciate Ligament Reconstruction. Frontiers in Human
Neuroscience. https://doi.org/10.3389/fnhum.2021.655116
bibtex: '@article{Lehmann_Büchel_Mouton_Gokeler_Seil_Baumeister_2021, title={Functional
Cortical Connectivity Related to Postural Control in Patients Six Weeks After
Anterior Cruciate Ligament Reconstruction}, DOI={10.3389/fnhum.2021.655116},
journal={Frontiers in Human Neuroscience}, author={Lehmann, Tim and Büchel, Daniel
and Mouton, Caroline and Gokeler, Alli and Seil, Romain and Baumeister, Jochen},
year={2021} }'
chicago: Lehmann, Tim, Daniel Büchel, Caroline Mouton, Alli Gokeler, Romain Seil,
and Jochen Baumeister. “Functional Cortical Connectivity Related to Postural Control
in Patients Six Weeks After Anterior Cruciate Ligament Reconstruction.” Frontiers
in Human Neuroscience, 2021. https://doi.org/10.3389/fnhum.2021.655116.
ieee: 'T. Lehmann, D. Büchel, C. Mouton, A. Gokeler, R. Seil, and J. Baumeister,
“Functional Cortical Connectivity Related to Postural Control in Patients Six
Weeks After Anterior Cruciate Ligament Reconstruction,” Frontiers in Human
Neuroscience, 2021, doi: 10.3389/fnhum.2021.655116.'
mla: Lehmann, Tim, et al. “Functional Cortical Connectivity Related to Postural
Control in Patients Six Weeks After Anterior Cruciate Ligament Reconstruction.”
Frontiers in Human Neuroscience, 2021, doi:10.3389/fnhum.2021.655116.
short: T. Lehmann, D. Büchel, C. Mouton, A. Gokeler, R. Seil, J. Baumeister, Frontiers
in Human Neuroscience (2021).
date_created: 2021-10-11T07:45:35Z
date_updated: 2022-01-06T06:57:15Z
department:
- _id: '172'
doi: 10.3389/fnhum.2021.655116
language:
- iso: eng
publication: Frontiers in Human Neuroscience
publication_identifier:
issn:
- 1662-5161
publication_status: published
status: public
title: Functional Cortical Connectivity Related to Postural Control in Patients Six
Weeks After Anterior Cruciate Ligament Reconstruction
type: journal_article
user_id: '41088'
year: '2021'
...
---
_id: '26033'
author:
- first_name: Henning
full_name: Zeipert, Henning
id: '32580'
last_name: Zeipert
- first_name: Sarah
full_name: Johannesmann, Sarah
id: '29190'
last_name: Johannesmann
- first_name: Marcel
full_name: Nicolai, Marcel
last_name: Nicolai
- first_name: Yevgeniya
full_name: Lugovtsova, Yevgeniya
last_name: Lugovtsova
- first_name: Jens
full_name: Prager, Jens
last_name: Prager
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Zeipert H, Johannesmann S, Nicolai M, Lugovtsova Y, Prager J, Henning B. Quantifying
the coupling strength of adhesively bonded materials by investigating mode repulsion
regions. In: Fortschritte Der Akustik - DAGA 2021. ; 2021.'
apa: Zeipert, H., Johannesmann, S., Nicolai, M., Lugovtsova, Y., Prager, J., &
Henning, B. (2021). Quantifying the coupling strength of adhesively bonded materials
by investigating mode repulsion regions. Fortschritte Der Akustik - DAGA 2021.
DAGA 2021 - 47. Jahrestagung für Akustik, Wien.
bibtex: '@inproceedings{Zeipert_Johannesmann_Nicolai_Lugovtsova_Prager_Henning_2021,
title={Quantifying the coupling strength of adhesively bonded materials by investigating
mode repulsion regions}, booktitle={Fortschritte der Akustik - DAGA 2021}, author={Zeipert,
Henning and Johannesmann, Sarah and Nicolai, Marcel and Lugovtsova, Yevgeniya
and Prager, Jens and Henning, Bernd}, year={2021} }'
chicago: Zeipert, Henning, Sarah Johannesmann, Marcel Nicolai, Yevgeniya Lugovtsova,
Jens Prager, and Bernd Henning. “Quantifying the Coupling Strength of Adhesively
Bonded Materials by Investigating Mode Repulsion Regions.” In Fortschritte
Der Akustik - DAGA 2021, 2021.
ieee: H. Zeipert, S. Johannesmann, M. Nicolai, Y. Lugovtsova, J. Prager, and B.
Henning, “Quantifying the coupling strength of adhesively bonded materials by
investigating mode repulsion regions,” presented at the DAGA 2021 - 47. Jahrestagung
für Akustik, Wien, 2021.
mla: Zeipert, Henning, et al. “Quantifying the Coupling Strength of Adhesively Bonded
Materials by Investigating Mode Repulsion Regions.” Fortschritte Der Akustik
- DAGA 2021, 2021.
short: 'H. Zeipert, S. Johannesmann, M. Nicolai, Y. Lugovtsova, J. Prager, B. Henning,
in: Fortschritte Der Akustik - DAGA 2021, 2021.'
conference:
location: Wien
name: DAGA 2021 - 47. Jahrestagung für Akustik
date_created: 2021-10-11T11:29:50Z
date_updated: 2022-01-06T06:57:15Z
department:
- _id: '49'
language:
- iso: eng
project:
- _id: '105'
grant_number: '449607253'
name: Vermiedene Kreuzungen von Lamb-Wellenmoden in mehrlagigen Strukturen
publication: Fortschritte der Akustik - DAGA 2021
status: public
title: Quantifying the coupling strength of adhesively bonded materials by investigating
mode repulsion regions
type: conference
user_id: '32580'
year: '2021'
...
---
_id: '26039'
author:
- first_name: Simon
full_name: Lahme, Simon
last_name: Lahme
- first_name: Anna
full_name: Bauer, Anna
id: '24755'
last_name: Bauer
orcid: 0000-0002-1742-3099
- first_name: Peter
full_name: Reinhold, Peter
last_name: Reinhold
citation:
ama: Lahme S, Bauer A, Reinhold P. Ansätze zur Diagnose und Förderung von Problemlösefähigkeiten
in der Studieneingangsphase Physik. Phydid B, Didaktik der Physik, Beiträge
zur DPG-Frühjahrstagung. Published online 2021:127-134.
apa: Lahme, S., Bauer, A., & Reinhold, P. (2021). Ansätze zur Diagnose und Förderung
von Problemlösefähigkeiten in der Studieneingangsphase Physik. Phydid B, Didaktik
der Physik, Beiträge zur DPG-Frühjahrstagung, 127–134.
bibtex: '@article{Lahme_Bauer_Reinhold_2021, title={Ansätze zur Diagnose und Förderung
von Problemlösefähigkeiten in der Studieneingangsphase Physik}, journal={Phydid
B, Didaktik der Physik, Beiträge zur DPG-Frühjahrstagung}, author={Lahme, Simon
and Bauer, Anna and Reinhold, Peter}, year={2021}, pages={127–134} }'
chicago: Lahme, Simon, Anna Bauer, and Peter Reinhold. “Ansätze zur Diagnose und
Förderung von Problemlösefähigkeiten in der Studieneingangsphase Physik.” Phydid
B, Didaktik der Physik, Beiträge zur DPG-Frühjahrstagung, 2021, 127–34.
ieee: S. Lahme, A. Bauer, and P. Reinhold, “Ansätze zur Diagnose und Förderung von
Problemlösefähigkeiten in der Studieneingangsphase Physik,” Phydid B, Didaktik
der Physik, Beiträge zur DPG-Frühjahrstagung, pp. 127–134, 2021.
mla: Lahme, Simon, et al. “Ansätze zur Diagnose und Förderung von Problemlösefähigkeiten
in der Studieneingangsphase Physik.” Phydid B, Didaktik der Physik, Beiträge
zur DPG-Frühjahrstagung, 2021, pp. 127–34.
short: S. Lahme, A. Bauer, P. Reinhold, Phydid B, Didaktik der Physik, Beiträge
zur DPG-Frühjahrstagung (2021) 127–134.
date_created: 2021-10-11T13:09:58Z
date_updated: 2022-01-06T06:57:15Z
department:
- _id: '299'
- _id: '651'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: http://www.phydid.de/index.php/phydid-b/article/view/1125
oa: '1'
page: 127-134
publication: Phydid B, Didaktik der Physik, Beiträge zur DPG-Frühjahrstagung
publication_status: published
status: public
title: Ansätze zur Diagnose und Förderung von Problemlösefähigkeiten in der Studieneingangsphase
Physik
type: journal_article
user_id: '24755'
year: '2021'
...
---
_id: '26050'
author:
- first_name: Patrick
full_name: Ködding, Patrick
id: '45402'
last_name: Ködding
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Ködding P, Dumitrescu R. Szenario-Technik mit digitalen Technologien (in Druck).
In: Hartmann EA, ed. Digitalisierung Souverän Gestalten. Springer Vieweg;
2021.'
apa: Ködding, P., & Dumitrescu, R. (2021). Szenario-Technik mit digitalen Technologien
(in Druck). In E. A. Hartmann (Ed.), Digitalisierung souverän gestalten.
Springer Vieweg.
bibtex: '@inproceedings{Ködding_Dumitrescu_2021, place={Berlin, Heidelberg}, title={Szenario-Technik
mit digitalen Technologien (in Druck)}, booktitle={Digitalisierung souverän gestalten},
publisher={Springer Vieweg}, author={Ködding, Patrick and Dumitrescu, Roman},
editor={Hartmann, Ernst A.}, year={2021} }'
chicago: 'Ködding, Patrick, and Roman Dumitrescu. “Szenario-Technik Mit Digitalen
Technologien (in Druck).” In Digitalisierung Souverän Gestalten, edited
by Ernst A. Hartmann. Berlin, Heidelberg: Springer Vieweg, 2021.'
ieee: P. Ködding and R. Dumitrescu, “Szenario-Technik mit digitalen Technologien
(in Druck),” in Digitalisierung souverän gestalten, 2021.
mla: Ködding, Patrick, and Roman Dumitrescu. “Szenario-Technik Mit Digitalen Technologien
(in Druck).” Digitalisierung Souverän Gestalten, edited by Ernst A. Hartmann,
Springer Vieweg, 2021.
short: 'P. Ködding, R. Dumitrescu, in: E.A. Hartmann (Ed.), Digitalisierung Souverän
Gestalten, Springer Vieweg, Berlin, Heidelberg, 2021.'
date_created: 2021-10-11T18:16:07Z
date_updated: 2022-01-06T06:57:16Z
department:
- _id: '563'
editor:
- first_name: Ernst A.
full_name: Hartmann, Ernst A.
last_name: Hartmann
language:
- iso: eng
place: Berlin, Heidelberg
publication: Digitalisierung souverän gestalten
publisher: Springer Vieweg
status: public
title: Szenario-Technik mit digitalen Technologien (in Druck)
type: conference
user_id: '45402'
year: '2021'
...
---
_id: '26173'
author:
- first_name: Dietrich
full_name: Voswinkel, Dietrich
id: '52634'
last_name: Voswinkel
citation:
ama: 'Voswinkel D. Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts
by Preliminary Surface Treatment. IOP Conference Series: Materials Science
and Engineering. 2021;1190. doi:10.1088/1757-899X/1190/1/012028'
apa: 'Voswinkel, D. (2021). Improving the Accuracy of Deep Drawn Fiber-Metal Laminate
Parts by Preliminary Surface Treatment. IOP Conference Series: Materials Science
and Engineering, 1190. https://doi.org/10.1088/1757-899X/1190/1/012028'
bibtex: '@article{Voswinkel_2021, title={Improving the Accuracy of Deep Drawn Fiber-Metal
Laminate Parts by Preliminary Surface Treatment}, volume={1190}, DOI={10.1088/1757-899X/1190/1/012028},
journal={ IOP Conference Series: Materials Science and Engineering}, author={Voswinkel,
Dietrich}, year={2021} }'
chicago: 'Voswinkel, Dietrich. “Improving the Accuracy of Deep Drawn Fiber-Metal
Laminate Parts by Preliminary Surface Treatment.” IOP Conference Series: Materials
Science and Engineering 1190 (2021). https://doi.org/10.1088/1757-899X/1190/1/012028.'
ieee: 'D. Voswinkel, “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate
Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials
Science and Engineering, vol. 1190, 2021, doi: 10.1088/1757-899X/1190/1/012028.'
mla: 'Voswinkel, Dietrich. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate
Parts by Preliminary Surface Treatment.” IOP Conference Series: Materials
Science and Engineering, vol. 1190, 2021, doi:10.1088/1757-899X/1190/1/012028.'
short: 'D. Voswinkel, IOP Conference Series: Materials Science and Engineering
1190 (2021).'
date_created: 2021-10-14T08:07:08Z
date_updated: 2022-01-06T06:57:17Z
ddc:
- '620'
department:
- _id: '9'
doi: 10.1088/1757-899X/1190/1/012028
file:
- access_level: closed
content_type: application/pdf
creator: divos
date_created: 2021-10-14T08:06:08Z
date_updated: 2021-10-14T08:06:08Z
file_id: '26174'
file_name: Voswinkel_2021_IOP_Conf._Ser. _Mater._Sci._Eng._1190_012028.pdf
file_size: 2859009
relation: main_file
success: 1
file_date_updated: 2021-10-14T08:06:08Z
has_accepted_license: '1'
intvolume: ' 1190'
language:
- iso: eng
publication: ' IOP Conference Series: Materials Science and Engineering'
status: public
title: Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary
Surface Treatment
type: journal_article
user_id: '52634'
volume: 1190
year: '2021'
...
---
_id: '26180'
author:
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Eva-Maria
full_name: Grote, Eva-Maria
last_name: Grote
- first_name: Stefan
full_name: Pfeifer, Stefan
last_name: Pfeifer
- first_name: Rik
full_name: Rasor, Rik
last_name: Rasor
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Lydia
full_name: Kaiser, Lydia
last_name: Kaiser
citation:
ama: 'Michael J, Grote E-M, Pfeifer S, et al. Towards the Concept of a Digital Green
Twin for a Sustainable Product Lifecycle. In: ; 2021.'
apa: Michael, J., Grote, E.-M., Pfeifer, S., Rasor, R., Henke, C., Trächtler, A.,
& Kaiser, L. (2021). Towards the Concept of a Digital Green Twin for a
Sustainable Product Lifecycle. 1st International Conference on Water Energy
Food and Sustainability (ICoWEFS).
bibtex: '@inproceedings{Michael_Grote_Pfeifer_Rasor_Henke_Trächtler_Kaiser_2021,
title={Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle},
author={Michael, Jan and Grote, Eva-Maria and Pfeifer, Stefan and Rasor, Rik and
Henke, Christian and Trächtler, Ansgar and Kaiser, Lydia}, year={2021} }'
chicago: Michael, Jan, Eva-Maria Grote, Stefan Pfeifer, Rik Rasor, Christian Henke,
Ansgar Trächtler, and Lydia Kaiser. “Towards the Concept of a Digital Green Twin
for a Sustainable Product Lifecycle,” 2021.
ieee: J. Michael et al., “Towards the Concept of a Digital Green Twin for
a Sustainable Product Lifecycle,” presented at the 1st International Conference
on Water Energy Food and Sustainability (ICoWEFS), 2021.
mla: Michael, Jan, et al. Towards the Concept of a Digital Green Twin for a Sustainable
Product Lifecycle. 2021.
short: 'J. Michael, E.-M. Grote, S. Pfeifer, R. Rasor, C. Henke, A. Trächtler, L.
Kaiser, in: 2021.'
conference:
name: 1st International Conference on Water Energy Food and Sustainability (ICoWEFS)
date_created: 2021-10-15T07:06:29Z
date_updated: 2022-01-06T06:57:17Z
department:
- _id: '241'
- _id: '153'
language:
- iso: eng
status: public
title: Towards the Concept of a Digital Green Twin for a Sustainable Product Lifecycle
type: conference
user_id: '24876'
year: '2021'
...
---
_id: '26191'
article_number: '012028'
author:
- first_name: Dietrich
full_name: Voswinkel, Dietrich
id: '52634'
last_name: Voswinkel
- first_name: Hüseyin
full_name: Sapli, Hüseyin
id: '13480'
last_name: Sapli
- first_name: Dennis
full_name: Kloidt, Dennis
last_name: Kloidt
- first_name: Thomas
full_name: Heggemann, Thomas
id: '9360'
last_name: Heggemann
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Voswinkel D, Sapli H, Kloidt D, et al. Improving the Accuracy of Deep Drawn
Fiber-Metal Laminate Parts by Preliminary Surface Treatment. IOP Conference
Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1190/1/012028'
apa: 'Voswinkel, D., Sapli, H., Kloidt, D., Heggemann, T., Homberg, W., Grydin,
O., & Schaper, M. (2021). Improving the Accuracy of Deep Drawn Fiber-Metal
Laminate Parts by Preliminary Surface Treatment. IOP Conference Series: Materials
Science and Engineering, Article 012028. https://doi.org/10.1088/1757-899x/1190/1/012028'
bibtex: '@article{Voswinkel_Sapli_Kloidt_Heggemann_Homberg_Grydin_Schaper_2021,
title={Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary
Surface Treatment}, DOI={10.1088/1757-899x/1190/1/012028},
number={012028}, journal={IOP Conference Series: Materials Science and Engineering},
author={Voswinkel, Dietrich and Sapli, Hüseyin and Kloidt, Dennis and Heggemann,
Thomas and Homberg, Werner and Grydin, Olexandr and Schaper, Mirko}, year={2021}
}'
chicago: 'Voswinkel, Dietrich, Hüseyin Sapli, Dennis Kloidt, Thomas Heggemann, Werner
Homberg, Olexandr Grydin, and Mirko Schaper. “Improving the Accuracy of Deep Drawn
Fiber-Metal Laminate Parts by Preliminary Surface Treatment.” IOP Conference
Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1190/1/012028.'
ieee: 'D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal
Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials
Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.'
mla: 'Voswinkel, Dietrich, et al. “Improving the Accuracy of Deep Drawn Fiber-Metal
Laminate Parts by Preliminary Surface Treatment.” IOP Conference Series: Materials
Science and Engineering, 012028, 2021, doi:10.1088/1757-899x/1190/1/012028.'
short: 'D. Voswinkel, H. Sapli, D. Kloidt, T. Heggemann, W. Homberg, O. Grydin,
M. Schaper, IOP Conference Series: Materials Science and Engineering (2021).'
date_created: 2021-10-15T08:05:53Z
date_updated: 2022-01-06T06:57:17Z
department:
- _id: '156'
- _id: '158'
doi: 10.1088/1757-899x/1190/1/012028
language:
- iso: eng
publication: 'IOP Conference Series: Materials Science and Engineering'
publication_identifier:
issn:
- 1757-8981
- 1757-899X
publication_status: published
status: public
title: Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary
Surface Treatment
type: journal_article
user_id: '13480'
year: '2021'
...
---
_id: '26401'
author:
- first_name: Magdalena
full_name: Förster, Magdalena
last_name: Förster
- first_name: Martin
full_name: Rabe, Martin
last_name: Rabe
- first_name: Arno
full_name: Kühn, Arno
last_name: Kühn
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Förster M, Rabe M, Kühn A, Dumitrescu R. Practical approach for the development
of digital guidelines for smart cities. In: Proceedings of the IEEE E-TEMS
2021. ; 2021.'
apa: Förster, M., Rabe, M., Kühn, A., & Dumitrescu, R. (2021). Practical approach
for the development of digital guidelines for smart cities. Proceedings of
the IEEE E-TEMS 2021. IEEE E-TEMS 2021.
bibtex: '@inproceedings{Förster_Rabe_Kühn_Dumitrescu_2021, title={Practical approach
for the development of digital guidelines for smart cities}, booktitle={Proceedings
of the IEEE E-TEMS 2021}, author={Förster, Magdalena and Rabe, Martin and Kühn,
Arno and Dumitrescu, Roman}, year={2021} }'
chicago: Förster, Magdalena, Martin Rabe, Arno Kühn, and Roman Dumitrescu. “Practical
Approach for the Development of Digital Guidelines for Smart Cities.” In Proceedings
of the IEEE E-TEMS 2021, 2021.
ieee: M. Förster, M. Rabe, A. Kühn, and R. Dumitrescu, “Practical approach for the
development of digital guidelines for smart cities,” presented at the IEEE E-TEMS
2021, 2021.
mla: Förster, Magdalena, et al. “Practical Approach for the Development of Digital
Guidelines for Smart Cities.” Proceedings of the IEEE E-TEMS 2021, 2021.
short: 'M. Förster, M. Rabe, A. Kühn, R. Dumitrescu, in: Proceedings of the IEEE
E-TEMS 2021, 2021.'
conference:
end_date: 2021-03-20
name: IEEE E-TEMS 2021
start_date: 2021-03-18
date_created: 2021-10-18T12:19:51Z
date_updated: 2022-01-06T06:57:20Z
department:
- _id: '563'
language:
- iso: eng
publication: Proceedings of the IEEE E-TEMS 2021
publication_status: published
status: public
title: Practical approach for the development of digital guidelines for smart cities
type: conference
user_id: '15782'
year: '2021'
...
---
_id: '26402'
author:
- first_name: Julian
full_name: Tekaat, Julian
last_name: Tekaat
- first_name: Harald
full_name: Anacker, Harald
last_name: Anacker
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Tekaat J, Anacker H, Dumitrescu R. The Paradigm of Design Thinking and Systems
Engineering in the Design of Cyber-Physical Systems: A Systematic Literature Review.
In: Proceedings of the 7th IEEE International Symposium on Systems Engineering.
; 2021.'
apa: 'Tekaat, J., Anacker, H., & Dumitrescu, R. (2021). The Paradigm of Design
Thinking and Systems Engineering in the Design of Cyber-Physical Systems: A Systematic
Literature Review. Proceedings of the 7th IEEE International Symposium on
Systems Engineering. 7th IEEE International Symposium on Systems Engineering.'
bibtex: '@inproceedings{Tekaat_Anacker_Dumitrescu_2021, title={The Paradigm of Design
Thinking and Systems Engineering in the Design of Cyber-Physical Systems: A Systematic
Literature Review}, booktitle={ Proceedings of the 7th IEEE International Symposium
on Systems Engineering}, author={Tekaat, Julian and Anacker, Harald and Dumitrescu,
Roman}, year={2021} }'
chicago: 'Tekaat, Julian, Harald Anacker, and Roman Dumitrescu. “The Paradigm of
Design Thinking and Systems Engineering in the Design of Cyber-Physical Systems:
A Systematic Literature Review.” In Proceedings of the 7th IEEE International
Symposium on Systems Engineering, 2021.'
ieee: 'J. Tekaat, H. Anacker, and R. Dumitrescu, “The Paradigm of Design Thinking
and Systems Engineering in the Design of Cyber-Physical Systems: A Systematic
Literature Review,” presented at the 7th IEEE International Symposium on Systems
Engineering, 2021.'
mla: 'Tekaat, Julian, et al. “The Paradigm of Design Thinking and Systems Engineering
in the Design of Cyber-Physical Systems: A Systematic Literature Review.”
Proceedings of the 7th IEEE International Symposium on Systems Engineering,
2021.'
short: 'J. Tekaat, H. Anacker, R. Dumitrescu, in: Proceedings of the 7th IEEE International
Symposium on Systems Engineering, 2021.'
conference:
end_date: 2021-09-15
name: 7th IEEE International Symposium on Systems Engineering
start_date: 2021-09-13
date_created: 2021-10-18T12:23:57Z
date_updated: 2022-01-06T06:57:20Z
department:
- _id: '563'
language:
- iso: eng
publication: ' Proceedings of the 7th IEEE International Symposium on Systems Engineering'
publication_status: published
status: public
title: 'The Paradigm of Design Thinking and Systems Engineering in the Design of Cyber-Physical
Systems: A Systematic Literature Review'
type: conference
user_id: '15782'
year: '2021'
...
---
_id: '26403'
author:
- first_name: Daria
full_name: Wilke, Daria
last_name: Wilke
- first_name: Anja
full_name: Schierbaum, Anja
last_name: Schierbaum
- first_name: Lydia
full_name: Kaiser, Lydia
last_name: Kaiser
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Wilke D, Schierbaum A, Kaiser L, Dumitrescu R. Need for Action for a Company-Wide
Introduction of Systems Engineering in Machinery and Plant Engineering. In: Proceedings
of the International Conference on Engineering Design, ICED 2021. ; 2021.'
apa: Wilke, D., Schierbaum, A., Kaiser, L., & Dumitrescu, R. (2021). Need for
Action for a Company-Wide Introduction of Systems Engineering in Machinery and
Plant Engineering. Proceedings of the International Conference on Engineering
Design, ICED 2021. ICED 2021, Gothenburg, Sweden.
bibtex: '@inproceedings{Wilke_Schierbaum_Kaiser_Dumitrescu_2021, title={Need for
Action for a Company-Wide Introduction of Systems Engineering in Machinery and
Plant Engineering}, booktitle={Proceedings of the International Conference on
Engineering Design, ICED 2021}, author={Wilke, Daria and Schierbaum, Anja and
Kaiser, Lydia and Dumitrescu, Roman}, year={2021} }'
chicago: Wilke, Daria, Anja Schierbaum, Lydia Kaiser, and Roman Dumitrescu. “Need
for Action for a Company-Wide Introduction of Systems Engineering in Machinery
and Plant Engineering.” In Proceedings of the International Conference on Engineering
Design, ICED 2021, 2021.
ieee: D. Wilke, A. Schierbaum, L. Kaiser, and R. Dumitrescu, “Need for Action for
a Company-Wide Introduction of Systems Engineering in Machinery and Plant Engineering,”
presented at the ICED 2021, Gothenburg, Sweden, 2021.
mla: Wilke, Daria, et al. “Need for Action for a Company-Wide Introduction of Systems
Engineering in Machinery and Plant Engineering.” Proceedings of the International
Conference on Engineering Design, ICED 2021, 2021.
short: 'D. Wilke, A. Schierbaum, L. Kaiser, R. Dumitrescu, in: Proceedings of the
International Conference on Engineering Design, ICED 2021, 2021.'
conference:
end_date: 2021-08-20
location: Gothenburg, Sweden
name: ICED 2021
start_date: 2021-08-16
date_created: 2021-10-18T12:31:29Z
date_updated: 2022-01-06T06:57:20Z
department:
- _id: '563'
language:
- iso: eng
publication: Proceedings of the International Conference on Engineering Design, ICED
2021
publication_status: published
status: public
title: Need for Action for a Company-Wide Introduction of Systems Engineering in Machinery
and Plant Engineering
type: conference
user_id: '15782'
year: '2021'
...
---
_id: '26404'
author:
- first_name: Daniel
full_name: Eckertz, Daniel
last_name: Eckertz
- first_name: Harald
full_name: Anacker, Harald
last_name: Anacker
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Eckertz D, Anacker H, Dumitrescu R. Augmented Reality-based Product Validation
to Support Collaborative Engineering of Complex Technical Systems. In: Auer ME,
Bhimavaram KR, Yue X-G, eds. Proceedings of the 18th International Conference
on Remote Engineering and Virtual Instrumentation, Online Engineering and Society
4.0. Vol 298. Springer International Publishing; 2021:451-463.'
apa: Eckertz, D., Anacker, H., & Dumitrescu, R. (2021). Augmented Reality-based
Product Validation to Support Collaborative Engineering of Complex Technical Systems.
In M. E. Auer, K. R. Bhimavaram, & X.-G. Yue (Eds.), Proceedings of the
18th International Conference on Remote Engineering and Virtual Instrumentation,
Online Engineering and Society 4.0 (Vol. 298, pp. 451–463). Springer International
Publishing.
bibtex: '@inproceedings{Eckertz_Anacker_Dumitrescu_2021, title={Augmented Reality-based
Product Validation to Support Collaborative Engineering of Complex Technical Systems},
volume={298}, booktitle={Proceedings of the 18th International Conference on Remote
Engineering and Virtual Instrumentation, Online Engineering and Society 4.0},
publisher={Springer International Publishing}, author={Eckertz, Daniel and Anacker,
Harald and Dumitrescu, Roman}, editor={Auer, Michael E. and Bhimavaram, Kalyan
Ram and Yue, Xiao-Guang}, year={2021}, pages={451–463} }'
chicago: Eckertz, Daniel, Harald Anacker, and Roman Dumitrescu. “Augmented Reality-Based
Product Validation to Support Collaborative Engineering of Complex Technical Systems.”
In Proceedings of the 18th International Conference on Remote Engineering and
Virtual Instrumentation, Online Engineering and Society 4.0, edited by Michael
E. Auer, Kalyan Ram Bhimavaram, and Xiao-Guang Yue, 298:451–63. Springer International
Publishing, 2021.
ieee: D. Eckertz, H. Anacker, and R. Dumitrescu, “Augmented Reality-based Product
Validation to Support Collaborative Engineering of Complex Technical Systems,”
in Proceedings of the 18th International Conference on Remote Engineering and
Virtual Instrumentation, Online Engineering and Society 4.0, 2021, vol. 298,
pp. 451–463.
mla: Eckertz, Daniel, et al. “Augmented Reality-Based Product Validation to Support
Collaborative Engineering of Complex Technical Systems.” Proceedings of the
18th International Conference on Remote Engineering and Virtual Instrumentation,
Online Engineering and Society 4.0, edited by Michael E. Auer et al., vol.
298, Springer International Publishing, 2021, pp. 451–63.
short: 'D. Eckertz, H. Anacker, R. Dumitrescu, in: M.E. Auer, K.R. Bhimavaram, X.-G.
Yue (Eds.), Proceedings of the 18th International Conference on Remote Engineering
and Virtual Instrumentation, Online Engineering and Society 4.0, Springer International
Publishing, 2021, pp. 451–463.'
date_created: 2021-10-18T13:01:07Z
date_updated: 2022-01-06T06:57:20Z
department:
- _id: '563'
editor:
- first_name: Michael E.
full_name: Auer, Michael E.
last_name: Auer
- first_name: Kalyan Ram
full_name: Bhimavaram, Kalyan Ram
last_name: Bhimavaram
- first_name: Xiao-Guang
full_name: Yue, Xiao-Guang
last_name: Yue
language:
- iso: eng
page: 451-463
publication: Proceedings of the 18th International Conference on Remote Engineering
and Virtual Instrumentation, Online Engineering and Society 4.0
publication_identifier:
isbn:
- 978-3-030-82528-7
publication_status: published
publisher: Springer International Publishing
status: public
title: Augmented Reality-based Product Validation to Support Collaborative Engineering
of Complex Technical Systems
type: conference
user_id: '15782'
volume: vol. 298
year: '2021'
...
---
_id: '26420'
author:
- first_name: Raphael
full_name: Hirtz, Raphael
last_name: Hirtz
- first_name: Manuel
full_name: Focker, Manuel
last_name: Focker
- first_name: Lars
full_name: Libuda, Lars
id: '88682'
last_name: Libuda
orcid: 0000-0003-1603-3133
- first_name: Jochen
full_name: Antel, Jochen
last_name: Antel
- first_name: Dana
full_name: Ozturk, Dana
last_name: Ozturk
- first_name: Cordula
full_name: Kiewert, Cordula
last_name: Kiewert
- first_name: Martin
full_name: Munteanu, Martin
last_name: Munteanu
- first_name: Triinu
full_name: Peters, Triinu
last_name: Peters
- first_name: Dagmar
full_name: Fuhrer, Dagmar
last_name: Fuhrer
- first_name: Denise
full_name: Zwanziger, Denise
last_name: Zwanziger
- first_name: Michael
full_name: Thamm, Michael
last_name: Thamm
- first_name: Johannes
full_name: Hebebrand, Johannes
last_name: Hebebrand
- first_name: Corinna
full_name: Grasemann, Corinna
last_name: Grasemann
citation:
ama: Hirtz R, Focker M, Libuda L, et al. Increased Prevalence of Subclinical Hypothyroidism
and Thyroid Autoimmunity in Depressed Adolescents. The Journal of Clinical
Psychiatry. Published online 2021. doi:10.4088/jcp.20m13511
apa: Hirtz, R., Focker, M., Libuda, L., Antel, J., Ozturk, D., Kiewert, C., Munteanu,
M., Peters, T., Fuhrer, D., Zwanziger, D., Thamm, M., Hebebrand, J., & Grasemann,
C. (2021). Increased Prevalence of Subclinical Hypothyroidism and Thyroid Autoimmunity
in Depressed Adolescents. The Journal of Clinical Psychiatry. https://doi.org/10.4088/jcp.20m13511
bibtex: '@article{Hirtz_Focker_Libuda_Antel_Ozturk_Kiewert_Munteanu_Peters_Fuhrer_Zwanziger_et
al._2021, title={Increased Prevalence of Subclinical Hypothyroidism and Thyroid
Autoimmunity in Depressed Adolescents}, DOI={10.4088/jcp.20m13511},
journal={The Journal of Clinical Psychiatry}, author={Hirtz, Raphael and Focker,
Manuel and Libuda, Lars and Antel, Jochen and Ozturk, Dana and Kiewert, Cordula
and Munteanu, Martin and Peters, Triinu and Fuhrer, Dagmar and Zwanziger, Denise
and et al.}, year={2021} }'
chicago: Hirtz, Raphael, Manuel Focker, Lars Libuda, Jochen Antel, Dana Ozturk,
Cordula Kiewert, Martin Munteanu, et al. “Increased Prevalence of Subclinical
Hypothyroidism and Thyroid Autoimmunity in Depressed Adolescents.” The Journal
of Clinical Psychiatry, 2021. https://doi.org/10.4088/jcp.20m13511.
ieee: 'R. Hirtz et al., “Increased Prevalence of Subclinical Hypothyroidism
and Thyroid Autoimmunity in Depressed Adolescents,” The Journal of Clinical
Psychiatry, 2021, doi: 10.4088/jcp.20m13511.'
mla: Hirtz, Raphael, et al. “Increased Prevalence of Subclinical Hypothyroidism
and Thyroid Autoimmunity in Depressed Adolescents.” The Journal of Clinical
Psychiatry, 2021, doi:10.4088/jcp.20m13511.
short: R. Hirtz, M. Focker, L. Libuda, J. Antel, D. Ozturk, C. Kiewert, M. Munteanu,
T. Peters, D. Fuhrer, D. Zwanziger, M. Thamm, J. Hebebrand, C. Grasemann, The
Journal of Clinical Psychiatry (2021).
date_created: 2021-10-18T18:07:45Z
date_updated: 2022-01-06T06:57:20Z
department:
- _id: '35'
- _id: '22'
- _id: '395'
doi: 10.4088/jcp.20m13511
language:
- iso: eng
publication: The Journal of Clinical Psychiatry
publication_identifier:
issn:
- 1555-2101
publication_status: published
status: public
title: Increased Prevalence of Subclinical Hypothyroidism and Thyroid Autoimmunity
in Depressed Adolescents
type: journal_article
user_id: '49428'
year: '2021'
...
---
_id: '26492'
author:
- first_name: Stefan
full_name: Gabriel, Stefan
last_name: Gabriel
- first_name: Tobias
full_name: Grauthoff, Tobias
last_name: Grauthoff
- first_name: Robert
full_name: Joppen, Robert
last_name: Joppen
- first_name: Arno
full_name: Kühn, Arno
last_name: Kühn
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Gabriel S, Grauthoff T, Joppen R, Kühn A, Dumitrescu R. Analyzing socio-technical
risks in implementation of Industry 4.0-use cases. In: Procedia CIRP. Vol
100. ; 2021:241-246.'
apa: Gabriel, S., Grauthoff, T., Joppen, R., Kühn, A., & Dumitrescu, R. (2021).
Analyzing socio-technical risks in implementation of Industry 4.0-use cases. Procedia
CIRP, 100, 241–246.
bibtex: '@inproceedings{Gabriel_Grauthoff_Joppen_Kühn_Dumitrescu_2021, title={Analyzing
socio-technical risks in implementation of Industry 4.0-use cases}, volume={100},
booktitle={Procedia CIRP}, author={Gabriel, Stefan and Grauthoff, Tobias and Joppen,
Robert and Kühn, Arno and Dumitrescu, Roman}, year={2021}, pages={241–246} }'
chicago: Gabriel, Stefan, Tobias Grauthoff, Robert Joppen, Arno Kühn, and Roman
Dumitrescu. “Analyzing Socio-Technical Risks in Implementation of Industry 4.0-Use
Cases.” In Procedia CIRP, 100:241–46, 2021.
ieee: S. Gabriel, T. Grauthoff, R. Joppen, A. Kühn, and R. Dumitrescu, “Analyzing
socio-technical risks in implementation of Industry 4.0-use cases,” in Procedia
CIRP, Enschede, the Netherlands, 2021, vol. 100, pp. 241–246.
mla: Gabriel, Stefan, et al. “Analyzing Socio-Technical Risks in Implementation
of Industry 4.0-Use Cases.” Procedia CIRP, vol. 100, 2021, pp. 241–46.
short: 'S. Gabriel, T. Grauthoff, R. Joppen, A. Kühn, R. Dumitrescu, in: Procedia
CIRP, 2021, pp. 241–246.'
conference:
end_date: 2021-05-21
location: Enschede, the Netherlands
name: 31st CIRP Design Conference
start_date: 2021-05-19
date_created: 2021-10-19T07:01:06Z
date_updated: 2022-01-06T06:57:21Z
department:
- _id: '563'
language:
- iso: eng
page: 241-246
publication: Procedia CIRP
publication_status: published
status: public
title: Analyzing socio-technical risks in implementation of Industry 4.0-use cases
type: conference
user_id: '15782'
volume: vol. 100
year: '2021'
...
---
_id: '26523'
abstract:
- lang: eng
text: AbstractWith this case report we support
our medical hypothesis that metreleptin treatment ameliorates starvation related
emotional, cognitive and behavioral symptomatology of anorexia nervosa (AN) and
show for the first time strong effects in a male patient with AN. A 15.9 year
old adolescent with severe AN of eight-month duration was treated off-label with
metreleptin. Hyperactivity was assessed with accelerometry. Visual analogue scales
(VAS), validated self- and clinician rating scales and lab results tracked changes
from baseline to end of the 24-day dosing period and a five-month follow-up. Substantial
improvements of mood and eating disorder related cognitions and hyperactivity
set in after two days of treatment. During dosing, sub-physiological testosterone
and TT3 levels normalized; clinically libido reemerged. Weight did not increase
substantially during the dosing period. During follow-up target weight was attained;
mood did not deteriorate; hyperactivity ceased. The results substantiate the strong
effects seen in female cases and underscore the need for a double-blind placebo-controlled
trial to confirm the observed strong, multiple and rapid onset beneficial effects
of metreleptin in AN.
author:
- first_name: Jochen
full_name: Antel, Jochen
last_name: Antel
- first_name: Susanne
full_name: Tan, Susanne
last_name: Tan
- first_name: Marvin
full_name: Grabler, Marvin
last_name: Grabler
- first_name: Christine
full_name: Ludwig, Christine
last_name: Ludwig
- first_name: Dominik
full_name: Lohkemper, Dominik
last_name: Lohkemper
- first_name: Tim
full_name: Brandenburg, Tim
last_name: Brandenburg
- first_name: Nikolaus
full_name: Barth, Nikolaus
last_name: Barth
- first_name: Anke
full_name: Hinney, Anke
last_name: Hinney
- first_name: Lars
full_name: Libuda, Lars
id: '88682'
last_name: Libuda
orcid: 0000-0003-1603-3133
- first_name: Miriam
full_name: Remy, Miriam
last_name: Remy
- first_name: Gabriella
full_name: Milos, Gabriella
last_name: Milos
- first_name: Johannes
full_name: Hebebrand, Johannes
last_name: Hebebrand
citation:
ama: Antel J, Tan S, Grabler M, et al. Rapid amelioration of anorexia nervosa in
a male adolescent during metreleptin treatment including recovery from hypogonadotropic
hypogonadism. European Child & Adolescent Psychiatry. Published online
2021. doi:10.1007/s00787-021-01778-7
apa: Antel, J., Tan, S., Grabler, M., Ludwig, C., Lohkemper, D., Brandenburg, T.,
Barth, N., Hinney, A., Libuda, L., Remy, M., Milos, G., & Hebebrand, J. (2021).
Rapid amelioration of anorexia nervosa in a male adolescent during metreleptin
treatment including recovery from hypogonadotropic hypogonadism. European Child
& Adolescent Psychiatry. https://doi.org/10.1007/s00787-021-01778-7
bibtex: '@article{Antel_Tan_Grabler_Ludwig_Lohkemper_Brandenburg_Barth_Hinney_Libuda_Remy_et
al._2021, title={Rapid amelioration of anorexia nervosa in a male adolescent during
metreleptin treatment including recovery from hypogonadotropic hypogonadism},
DOI={10.1007/s00787-021-01778-7},
journal={European Child & Adolescent Psychiatry}, author={Antel, Jochen and
Tan, Susanne and Grabler, Marvin and Ludwig, Christine and Lohkemper, Dominik
and Brandenburg, Tim and Barth, Nikolaus and Hinney, Anke and Libuda, Lars and
Remy, Miriam and et al.}, year={2021} }'
chicago: Antel, Jochen, Susanne Tan, Marvin Grabler, Christine Ludwig, Dominik Lohkemper,
Tim Brandenburg, Nikolaus Barth, et al. “Rapid Amelioration of Anorexia Nervosa
in a Male Adolescent during Metreleptin Treatment Including Recovery from Hypogonadotropic
Hypogonadism.” European Child & Adolescent Psychiatry, 2021. https://doi.org/10.1007/s00787-021-01778-7.
ieee: 'J. Antel et al., “Rapid amelioration of anorexia nervosa in a male
adolescent during metreleptin treatment including recovery from hypogonadotropic
hypogonadism,” European Child & Adolescent Psychiatry, 2021, doi: 10.1007/s00787-021-01778-7.'
mla: Antel, Jochen, et al. “Rapid Amelioration of Anorexia Nervosa in a Male Adolescent
during Metreleptin Treatment Including Recovery from Hypogonadotropic Hypogonadism.”
European Child & Adolescent Psychiatry, 2021, doi:10.1007/s00787-021-01778-7.
short: J. Antel, S. Tan, M. Grabler, C. Ludwig, D. Lohkemper, T. Brandenburg, N.
Barth, A. Hinney, L. Libuda, M. Remy, G. Milos, J. Hebebrand, European Child &
Adolescent Psychiatry (2021).
date_created: 2021-10-19T09:53:53Z
date_updated: 2022-01-06T06:57:21Z
department:
- _id: '35'
- _id: '22'
- _id: '395'
doi: 10.1007/s00787-021-01778-7
language:
- iso: eng
publication: European Child & Adolescent Psychiatry
publication_identifier:
issn:
- 1018-8827
- 1435-165X
publication_status: published
status: public
title: Rapid amelioration of anorexia nervosa in a male adolescent during metreleptin
treatment including recovery from hypogonadotropic hypogonadism
type: journal_article
user_id: '49428'
year: '2021'
...
---
_id: '26628'
author:
- first_name: Hatice
full_name: Malatyali, Hatice
id: '30479'
last_name: Malatyali
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
citation:
ama: 'Malatyali H, Schöppner V. Investigation of shear rates in twin-screw extruders
using CFD simulations. In: 36th PPS. ; 2021.'
apa: Malatyali, H., & Schöppner, V. (2021). Investigation of shear rates in
twin-screw extruders using CFD simulations. 36th PPS. 36th International
conference of the polymer processing society, Montreal .
bibtex: '@inproceedings{Malatyali_Schöppner_2021, title={Investigation of shear
rates in twin-screw extruders using CFD simulations}, booktitle={36th PPS}, author={Malatyali,
Hatice and Schöppner, Volker}, year={2021} }'
chicago: Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates
in Twin-Screw Extruders Using CFD Simulations.” In 36th PPS, 2021.
ieee: H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw
extruders using CFD simulations,” presented at the 36th International conference
of the polymer processing society, Montreal , 2021.
mla: Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates in Twin-Screw
Extruders Using CFD Simulations.” 36th PPS, 2021.
short: 'H. Malatyali, V. Schöppner, in: 36th PPS, 2021.'
conference:
end_date: 29.09.2021
location: 'Montreal '
name: 36th International conference of the polymer processing society
start_date: 26.09.2021
date_created: 2021-10-20T13:08:16Z
date_updated: 2022-01-06T06:57:24Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: 36th PPS
status: public
title: Investigation of shear rates in twin-screw extruders using CFD simulations
type: conference
user_id: '30479'
year: '2021'
...
---
_id: '26629'
author:
- first_name: Hatice
full_name: Malatyali, Hatice
id: '30479'
last_name: Malatyali
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: Theresa
full_name: Hoemann, Theresa
last_name: Hoemann
citation:
ama: 'Malatyali H, Schöppner V, Hoemann T. Investigation of the influence of process
and screw configurations on fiber length distribution for recycled carbon fiber.
In: 36th PPS. ; 2021.'
apa: Malatyali, H., Schöppner, V., & Hoemann, T. (2021). Investigation of the
influence of process and screw configurations on fiber length distribution for
recycled carbon fiber. 36th PPS. 36th International conference of the polymer
processing society, Montreal.
bibtex: '@inproceedings{Malatyali_Schöppner_Hoemann_2021, title={Investigation of
the influence of process and screw configurations on fiber length distribution
for recycled carbon fiber}, booktitle={36th PPS}, author={Malatyali, Hatice and
Schöppner, Volker and Hoemann, Theresa}, year={2021} }'
chicago: Malatyali, Hatice, Volker Schöppner, and Theresa Hoemann. “Investigation
of the Influence of Process and Screw Configurations on Fiber Length Distribution
for Recycled Carbon Fiber.” In 36th PPS, 2021.
ieee: H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence
of process and screw configurations on fiber length distribution for recycled
carbon fiber,” presented at the 36th International conference of the polymer processing
society, Montreal, 2021.
mla: Malatyali, Hatice, et al. “Investigation of the Influence of Process and Screw
Configurations on Fiber Length Distribution for Recycled Carbon Fiber.” 36th
PPS, 2021.
short: 'H. Malatyali, V. Schöppner, T. Hoemann, in: 36th PPS, 2021.'
conference:
end_date: 29.09.2021
location: Montreal
name: 36th International conference of the polymer processing society
start_date: 26.09.2021
date_created: 2021-10-20T13:11:56Z
date_updated: 2022-01-06T06:57:24Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: 36th PPS
status: public
title: Investigation of the influence of process and screw configurations on fiber
length distribution for recycled carbon fiber
type: conference
user_id: '30479'
year: '2021'
...
---
_id: '26630'
author:
- first_name: Matthias
full_name: Altepeter, Matthias
id: '33420'
last_name: Altepeter
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Sven
full_name: Wanke, Sven
last_name: Wanke
citation:
ama: 'Altepeter M, Schöppner V, Wanke S. Analysis and modelling of the material
degradation of polypropylene on the co-rotating twin-screw extruder. In: ; 2021.'
apa: Altepeter, M., Schöppner, V., & Wanke, S. (2021). Analysis and modelling
of the material degradation of polypropylene on the co-rotating twin-screw extruder.
bibtex: '@inproceedings{Altepeter_Schöppner_Wanke_2021, title={Analysis and modelling
of the material degradation of polypropylene on the co-rotating twin-screw extruder},
author={Altepeter, Matthias and Schöppner, Volker and Wanke, Sven}, year={2021}
}'
chicago: Altepeter, Matthias, Volker Schöppner, and Sven Wanke. “Analysis and Modelling
of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder,”
2021.
ieee: M. Altepeter, V. Schöppner, and S. Wanke, “Analysis and modelling of the material
degradation of polypropylene on the co-rotating twin-screw extruder,” 2021.
mla: Altepeter, Matthias, et al. Analysis and Modelling of the Material Degradation
of Polypropylene on the Co-Rotating Twin-Screw Extruder. 2021.
short: 'M. Altepeter, V. Schöppner, S. Wanke, in: 2021.'
date_created: 2021-10-20T13:14:27Z
date_updated: 2022-01-06T06:57:24Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: Analysis and modelling of the material degradation of polypropylene on the
co-rotating twin-screw extruder
type: conference
user_id: '33420'
year: '2021'
...
---
_id: '26633'
author:
- first_name: Kirsten
full_name: Schlegel-Matthies, Kirsten
id: '459'
last_name: Schlegel-Matthies
- first_name: Claudia
full_name: Wespi, Claudia
last_name: Wespi
citation:
ama: 'Schlegel-Matthies K, Wespi C. Befähigung zur Reflexion und zum Umgang mit
Ambiguitäten. Zur Wirksamkeit von Unterricht für “Lebensführung.” In: Reinhardt
V, Rehm M, Wilhem M, eds. Wirksamer Fachunterricht. Eine metaanalytische
Betrachtung von Expertisen aus 17 Schulfächern. Baltmannsweiler: Schneider-Verlag;
2021:200-217.'
apa: 'Schlegel-Matthies, K., & Wespi, C. (2021). Befähigung zur Reflexion und
zum Umgang mit Ambiguitäten. Zur Wirksamkeit von Unterricht für “Lebensführung.”
In V. Reinhardt, M. Rehm , & M. Wilhem (Eds.), Wirksamer Fachunterricht.
Eine metaanalytische Betrachtung von Expertisen aus 17 Schulfächern (pp. 200–217).
Baltmannsweiler: Schneider-Verlag.'
bibtex: '@inbook{Schlegel-Matthies_Wespi_2021, title={Befähigung zur Reflexion und
zum Umgang mit Ambiguitäten. Zur Wirksamkeit von Unterricht für “Lebensführung”},
booktitle={Wirksamer Fachunterricht. Eine metaanalytische Betrachtung von Expertisen
aus 17 Schulfächern}, publisher={Baltmannsweiler: Schneider-Verlag}, author={Schlegel-Matthies,
Kirsten and Wespi, Claudia}, editor={Reinhardt, V. and Rehm , M. and Wilhem ,
M.}, year={2021}, pages={200–217} }'
chicago: 'Schlegel-Matthies, Kirsten, and Claudia Wespi. “Befähigung zur Reflexion
und zum Umgang mit Ambiguitäten. Zur Wirksamkeit von Unterricht für ‘Lebensführung.’”
In Wirksamer Fachunterricht. Eine metaanalytische Betrachtung von Expertisen
aus 17 Schulfächern, edited by V. Reinhardt, M. Rehm , and M. Wilhem , 200–217.
Baltmannsweiler: Schneider-Verlag, 2021.'
ieee: 'K. Schlegel-Matthies and C. Wespi, “Befähigung zur Reflexion und zum Umgang
mit Ambiguitäten. Zur Wirksamkeit von Unterricht für ‘Lebensführung,’” in Wirksamer
Fachunterricht. Eine metaanalytische Betrachtung von Expertisen aus 17 Schulfächern,
V. Reinhardt, M. Rehm , and M. Wilhem , Eds. Baltmannsweiler: Schneider-Verlag,
2021, pp. 200–217.'
mla: 'Schlegel-Matthies, Kirsten, and Claudia Wespi. “Befähigung zur Reflexion und
zum Umgang mit Ambiguitäten. Zur Wirksamkeit von Unterricht für ‘Lebensführung.’”
Wirksamer Fachunterricht. Eine metaanalytische Betrachtung von Expertisen aus
17 Schulfächern, edited by V. Reinhardt et al., Baltmannsweiler: Schneider-Verlag,
2021, pp. 200–17.'
short: 'K. Schlegel-Matthies, C. Wespi, in: V. Reinhardt, M. Rehm , M. Wilhem (Eds.),
Wirksamer Fachunterricht. Eine metaanalytische Betrachtung von Expertisen aus
17 Schulfächern, Baltmannsweiler: Schneider-Verlag, 2021, pp. 200–217.'
date_created: 2021-10-20T19:17:38Z
date_updated: 2022-01-06T06:57:24Z
department:
- _id: '35'
- _id: '22'
- _id: '396'
editor:
- first_name: V.
full_name: Reinhardt, V.
last_name: Reinhardt
- first_name: M.
full_name: Rehm , M.
last_name: 'Rehm '
- first_name: M.
full_name: Wilhem , M.
last_name: 'Wilhem '
language:
- iso: ger
page: 200-217
publication: Wirksamer Fachunterricht. Eine metaanalytische Betrachtung von Expertisen
aus 17 Schulfächern
publication_status: published
publisher: 'Baltmannsweiler: Schneider-Verlag'
status: public
title: Befähigung zur Reflexion und zum Umgang mit Ambiguitäten. Zur Wirksamkeit von
Unterricht für "Lebensführung"
type: book_chapter
user_id: '49428'
year: '2021'
...
---
_id: '26635'
author:
- first_name: Kirsten
full_name: Schlegel-Matthies, Kirsten
id: '459'
last_name: Schlegel-Matthies
- first_name: Claudia
full_name: Wespi, Claudia
last_name: Wespi
citation:
ama: 'Schlegel-Matthies K, Wespi C. Wirksamer Unterricht für Lebensführung. (Unterrichtsqualität:
Perspektiven von Expertinnen und Experten 12) . Vol 12. Baltmannsweiler: Schneider-Verlag.;
2021.'
apa: 'Schlegel-Matthies, K., & Wespi, C. (2021). Wirksamer Unterricht für
Lebensführung. (Unterrichtsqualität: Perspektiven von Expertinnen und Experten
12) (Vol. 12). Baltmannsweiler: Schneider-Verlag.'
bibtex: '@book{Schlegel-Matthies_Wespi_2021, title={Wirksamer Unterricht für Lebensführung.
(Unterrichtsqualität: Perspektiven von Expertinnen und Experten 12) }, volume={12},
publisher={Baltmannsweiler: Schneider-Verlag.}, author={Schlegel-Matthies, Kirsten
and Wespi, Claudia}, year={2021} }'
chicago: 'Schlegel-Matthies, Kirsten, and Claudia Wespi. Wirksamer Unterricht
für Lebensführung. (Unterrichtsqualität: Perspektiven von Expertinnen und Experten
12) . Vol. 12. Baltmannsweiler: Schneider-Verlag., 2021.'
ieee: 'K. Schlegel-Matthies and C. Wespi, Wirksamer Unterricht für Lebensführung.
(Unterrichtsqualität: Perspektiven von Expertinnen und Experten 12) , vol.
12. Baltmannsweiler: Schneider-Verlag., 2021.'
mla: 'Schlegel-Matthies, Kirsten, and Claudia Wespi. Wirksamer Unterricht für
Lebensführung. (Unterrichtsqualität: Perspektiven von Expertinnen und Experten
12) . Baltmannsweiler: Schneider-Verlag., 2021.'
short: 'K. Schlegel-Matthies, C. Wespi, Wirksamer Unterricht für Lebensführung.
(Unterrichtsqualität: Perspektiven von Expertinnen und Experten 12) , Baltmannsweiler:
Schneider-Verlag., 2021.'
date_created: 2021-10-20T19:23:57Z
date_updated: 2022-01-06T06:57:24Z
department:
- _id: '35'
- _id: '22'
- _id: '396'
intvolume: ' 12'
language:
- iso: ger
page: '245'
publication_identifier:
isbn:
- 'ISBN-13: 9783834020314'
publication_status: published
publisher: 'Baltmannsweiler: Schneider-Verlag.'
status: public
title: 'Wirksamer Unterricht für Lebensführung. (Unterrichtsqualität: Perspektiven
von Expertinnen und Experten 12) '
type: book
user_id: '49428'
volume: 12
year: '2021'
...
---
_id: '26649'
abstract:
- lang: eng
text: "Within the scope of the research project, four new mechanical joining processes
for the singlestage, pre-hole-free joining of FRP-FRP joints were further developed.
For this purpose, the joining processes under consideration were first implemented
on existing equipment at the research institute. Based on the successful adaptation
of the joining processes, characteristics of the joints were documented by means
of micrographs and observation of external characteristics, on the basis of which
measures for process modification were derived. The process modifications were
carried out on a process-specific basis for a selected GFRPGFRP joint. The aim
was to improve the joint quality, in particular with regard to the reduction of
laminate damage, by means of targeted element and tool development in addition
to the increase in process stability. Based on these results, a realistic suitability
evaluation of the\r\njoining methods was carried out with regard to process and
manufacturing flexibility. As a result, two self-piercing riveting processes,
which showed the greatest suitability potential, were examined in more detail
to analyse the application limits. In the process, the joints were sampled on
further material combinations with varied fibre and matrix systems. In addition,
joints with adhesive were investigated, in which the influence of the adhesive
viscosity on the joint properties was analysed. The joint properties of the new
joining method were then comprehensively determined by tensile tests under quasi-static,
cyclic loads. Finally, the behaviour of the optimised joints under corrosive load
was characterised in the salt spray test. Through the targeted process modifications
in this project, the FRP-FRP joints can be joined\r\nwith less damage, enabling
improved joint quality in the FRP-based components."
author:
- first_name: Daxin
full_name: Han, Daxin
id: '36544'
last_name: Han
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Han D, Meschut G. Mechanisches Fügen von FKV-FKV-Verbindungen.; 2021.
apa: Han, D., & Meschut, G. (2021). Mechanisches Fügen von FKV-FKV-Verbindungen.
bibtex: '@book{Han_Meschut_2021, title={Mechanisches Fügen von FKV-FKV-Verbindungen},
author={Han, Daxin and Meschut, Gerson}, year={2021} }'
chicago: Han, Daxin, and Gerson Meschut. Mechanisches Fügen von FKV-FKV-Verbindungen,
2021.
ieee: D. Han and G. Meschut, Mechanisches Fügen von FKV-FKV-Verbindungen.
2021.
mla: Han, Daxin, and Gerson Meschut. Mechanisches Fügen von FKV-FKV-Verbindungen.
2021.
short: D. Han, G. Meschut, Mechanisches Fügen von FKV-FKV-Verbindungen, 2021.
date_created: 2021-10-21T07:56:34Z
date_updated: 2022-01-06T06:57:24Z
department:
- _id: '157'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-86776-618-0
publication_status: published
quality_controlled: '1'
status: public
title: Mechanisches Fügen von FKV-FKV-Verbindungen
type: book
user_id: '36544'
year: '2021'
...