---
_id: '22018'
abstract:
- lang: eng
text: Fused Deposition Modeling (FDM) parts are prone to process-related rough and
wavy surfaces with stair-stepping effects whenever the parts produced have sloped
or rounded geometries. These stair-stepping effects can be reduced by using a
smaller slice height, but complete elimination is not possible. In this paper,
FDM parts manufactured with the material ABS-M30 are finished using mass finishing
methods. The mass finishing is done with a trough vibrator, which is comparatively
gentle to the parts in comparison to other mass finishing technologies. The analysis
discusses the surface-smoothing effect of finishing time and intensity on various
part sizes and build orientations. In addition, the dimensional accuracy of the
parts after the finishing process is examined.
author:
- first_name: M.
full_name: Fischer, M.
last_name: Fischer
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Fischer M, Schöppner V. Finishing of ABS-M30 Parts Manufactured with Fused
Deposition Modeling with Focus on Dimensional Accuracy. In: 25th Annual International
Solid Freeform Fabrication Symposium. Vol 25. ; 2014:923-934. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf'
apa: Fischer, M., & Schöppner, V. (2014). Finishing of ABS-M30 Parts Manufactured
with Fused Deposition Modeling with Focus on Dimensional Accuracy. 25th Annual
International Solid Freeform Fabrication Symposium, 25, 923–934. http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
bibtex: '@inproceedings{Fischer_Schöppner_2014, title={Finishing of ABS-M30 Parts
Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy},
volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Fischer,
M. and Schöppner, Volker}, year={2014}, pages={923–934} }'
chicago: Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured
with Fused Deposition Modeling with Focus on Dimensional Accuracy.” In 25th
Annual International Solid Freeform Fabrication Symposium, 25:923–34, 2014.
http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
ieee: 'M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with
Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual
International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934,
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.'
mla: Fischer, M., and Volker Schöppner. “Finishing of ABS-M30 Parts Manufactured
with Fused Deposition Modeling with Focus on Dimensional Accuracy.” 25th Annual
International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 923–34,
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
short: 'M. Fischer, V. Schöppner, in: 25th Annual International Solid Freeform Fabrication
Symposium, 2014, pp. 923–934.'
date_created: 2021-05-07T13:22:57Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf
intvolume: ' 25'
language:
- iso: eng
page: 923-934
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with
Focus on Dimensional Accuracy
type: conference
user_id: '70729'
volume: 25
year: '2014'
...
---
_id: '22030'
abstract:
- lang: eng
text: Parts produced by Fused Deposition Modeling (FDM) tend to have rough and undulating
surfaces with staircase effects on rounded and slanting areas of the part. This
is due to the characteristics of the process. In many fields of application, high
demands are made on the optical quality of the part. An improvement in the surface
quality of FDM parts made of Ultem*9085 can be achieved through post-treatment
with a mass finishing process. In this paper, FDM specimens are post-treated in
a disk finishing unit. Influences of the mass finishing process are analyzed with
regard to the dependence of surface quality on the various process parameters
and on the finishing medium, grinding time and grinding speed. The finishing efficiency
depends on the finishing media and decreases for lower finishing time. For all
media a lower disk velocity results a smaller grinding effect, but there are clearly
differences between the finishing media. The paper also discusses effects of the
grinding process on the mechanical properties of the parts. Especially small part
geometries and parts build in z-direction tend to break during the finishing process.
author:
- first_name: M.
full_name: Fischer, M.
last_name: Fischer
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Fischer M, Schöppner V. Effects of a mass finishing process on parts produced
from Ultem 9085 by Fused Deposition Modeling. In: ANTEC. SPE: Society of
Plastics Engineers; 2014:2331-2336.'
apa: Fischer, M., & Schöppner, V. (2014). Effects of a mass finishing process
on parts produced from Ultem 9085 by Fused Deposition Modeling. ANTEC,
2331–2336.
bibtex: '@inproceedings{Fischer_Schöppner_2014, title={Effects of a mass finishing
process on parts produced from Ultem 9085 by Fused Deposition Modeling}, booktitle={ANTEC},
publisher={SPE: Society of Plastics Engineers}, author={Fischer, M. and Schöppner,
Volker}, year={2014}, pages={2331–2336} }'
chicago: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process
on Parts Produced from Ultem 9085 by Fused Deposition Modeling.” In ANTEC,
2331–36. SPE: Society of Plastics Engineers, 2014.'
ieee: M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts
produced from Ultem 9085 by Fused Deposition Modeling,” in ANTEC, 2014,
pp. 2331–2336.
mla: 'Fischer, M., and Volker Schöppner. “Effects of a Mass Finishing Process on
Parts Produced from Ultem 9085 by Fused Deposition Modeling.” ANTEC, SPE:
Society of Plastics Engineers, 2014, pp. 2331–36.'
short: 'M. Fischer, V. Schöppner, in: ANTEC, SPE: Society of Plastics Engineers,
2014, pp. 2331–2336.'
date_created: 2021-05-07T13:23:11Z
date_updated: 2022-04-25T08:03:55Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
language:
- iso: eng
page: 2331-2336
publication: ANTEC
publication_identifier:
isbn:
- 978-1-63439-708-7
publisher: 'SPE: Society of Plastics Engineers'
quality_controlled: '1'
status: public
title: Effects of a mass finishing process on parts produced from Ultem 9085 by Fused
Deposition Modeling
type: conference
user_id: '70729'
year: '2014'
...
---
_id: '22021'
abstract:
- lang: eng
text: Additive production techniques have the advantage of manufacturing parts without
needing a forming tool. One of the most used additive manufacturing processes
is "Fused Deposition Modeling" (FDM) which allows the production of prototypes
and end-use parts. Due to the manufacture layer by layer, also complex part geometries
can be created in one working step. Furthermore, lightweight parts with specific
inner core structures can be manufactured in order to achieve good weightrelated
strength properties. In this paper the mechanical behavior of lightweight parts
manufactured with the 3D production system Fortus 400mc from Stratasys and the
material Polyetherimide (PEI) with the trade name Ultem*9085 is analyzed. The
test specimens were built up with different inner structures and building directions.
Therefore, test specimens with known lightweight core geometries (e.g. corrugated
and honeycomb cores) were designed. A four-point bending test was conducted to
analyze the strength properties as well as the weight-related strength properties.
Additionally the influence of the structure width, the structure wall thickness
and the top layer thickness was analyzed using a honeycomb structure.
author:
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: S.
full_name: Josupeit, S.
last_name: Josupeit
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: E.
full_name: Klemp, E.
last_name: Klemp
citation:
ama: 'Bagsik A, Josupeit S, Schöppner V, Klemp E. Mechanical Analysis of Lightweight
Constructions manufactured with Fused Deposition Modeling. In: 29th International
Conference of the Polymer Processing Society. Vol 29. American Institute of
Physics ; 2014:696-701. doi:10.1063/1.4873874'
apa: Bagsik, A., Josupeit, S., Schöppner, V., & Klemp, E. (2014). Mechanical
Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling.
29th International Conference of the Polymer Processing Society, 29,
696–701. https://doi.org/10.1063/1.4873874
bibtex: '@inproceedings{Bagsik_Josupeit_Schöppner_Klemp_2014, title={Mechanical
Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling},
volume={29}, DOI={10.1063/1.4873874},
booktitle={29th International Conference of the Polymer Processing Society}, publisher={American
Institute of Physics }, author={Bagsik, A. and Josupeit, S. and Schöppner, Volker
and Klemp, E.}, year={2014}, pages={696–701} }'
chicago: Bagsik, A., S. Josupeit, Volker Schöppner, and E. Klemp. “Mechanical Analysis
of Lightweight Constructions Manufactured with Fused Deposition Modeling.” In
29th International Conference of the Polymer Processing Society, 29:696–701.
American Institute of Physics , 2014. https://doi.org/10.1063/1.4873874.
ieee: 'A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis
of Lightweight Constructions manufactured with Fused Deposition Modeling,” in
29th International Conference of the Polymer Processing Society, 2014,
vol. 29, pp. 696–701, doi: 10.1063/1.4873874.'
mla: Bagsik, A., et al. “Mechanical Analysis of Lightweight Constructions Manufactured
with Fused Deposition Modeling.” 29th International Conference of the Polymer
Processing Society, vol. 29, American Institute of Physics , 2014, pp. 696–701,
doi:10.1063/1.4873874.
short: 'A. Bagsik, S. Josupeit, V. Schöppner, E. Klemp, in: 29th International Conference
of the Polymer Processing Society, American Institute of Physics , 2014, pp. 696–701.'
date_created: 2021-05-07T13:23:00Z
date_updated: 2022-04-25T08:05:29Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.4873874
intvolume: ' 29'
language:
- iso: eng
page: 696-701
publication: 29th International Conference of the Polymer Processing Society
publisher: 'American Institute of Physics '
quality_controlled: '1'
status: public
title: Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition
Modeling
type: conference
user_id: '70729'
volume: 29
year: '2014'
...
---
_id: '22186'
abstract:
- lang: eng
text: 'The reproducibility and reliability of quality aspects are an important challenge
of the polymer laser sintering process. However, existing quality concepts and
standardization activities considering influencing factors along the whole process
chain have not been validated experimentally yet. In this work, these factors
are analyzed and kept constant to obtain a reliable material data set for different
layer thicknesses and testing temperatures. In addition, material qualities regarding
powder ageing effects are analyzed using different build heights and layer thicknesses:
while an increase of the layer thickness reduces mechanical part strength and
density, it also results in a less intense thermal ageing of unmolten powder due
to shorter build times.'
article_number: '185374'
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Rüsenberg S, Josupeit S, Schmid H-J. A method to characterize the quality of
a polymer laser sintering process . Advances in Mechanical Engineering.
2014;6. doi:10.1155/2014/185374
apa: Rüsenberg, S., Josupeit, S., & Schmid, H.-J. (2014). A method to characterize
the quality of a polymer laser sintering process . Advances in Mechanical Engineering,
6, Article 185374. https://doi.org/10.1155/2014/185374
bibtex: '@article{Rüsenberg_Josupeit_Schmid_2014, title={A method to characterize
the quality of a polymer laser sintering process }, volume={6}, DOI={10.1155/2014/185374},
number={185374}, journal={Advances in Mechanical Engineering}, publisher={SAGE
Publications}, author={Rüsenberg, Stefan and Josupeit, Stefan and Schmid, Hans-Joachim},
year={2014} }'
chicago: Rüsenberg, Stefan, Stefan Josupeit, and Hans-Joachim Schmid. “A Method
to Characterize the Quality of a Polymer Laser Sintering Process .” Advances
in Mechanical Engineering 6 (2014). https://doi.org/10.1155/2014/185374.
ieee: 'S. Rüsenberg, S. Josupeit, and H.-J. Schmid, “A method to characterize the
quality of a polymer laser sintering process ,” Advances in Mechanical Engineering,
vol. 6, Art. no. 185374, 2014, doi: 10.1155/2014/185374.'
mla: Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer
Laser Sintering Process .” Advances in Mechanical Engineering, vol. 6,
185374, SAGE Publications, 2014, doi:10.1155/2014/185374.
short: S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering
6 (2014).
date_created: 2021-05-14T07:46:17Z
date_updated: 2026-02-19T14:21:49Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1155/2014/185374
intvolume: ' 6'
language:
- iso: eng
publication: Advances in Mechanical Engineering
publication_identifier:
issn:
- 1687-8140
publisher: SAGE Publications
status: public
title: 'A method to characterize the quality of a polymer laser sintering process '
type: journal_article
user_id: '14972'
volume: 6
year: '2014'
...
---
_id: '22175'
abstract:
- lang: eng
text: 'In this work, the quality of laser sintered parts is investigated along a
defined process chain for a nylon 12 material (PA 2200) on an EOSINT P395 laser
sintering system. Important influencing factors are figured out. Rheological powder
characterization methods are investigated as well as mechanical, physical and
other chosen part properties. The concept allows reproducible part quality characteristics
and is used to obtain (testing) temperature dependent material data. It can also
be extended on further materials based on nylon 12: PA 2241 FR, which is convenient
for the aircraft industry due to its flame-retardant properties, and PA 2221,
which has economic advantages due to a lower material consumption.'
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Rüsenberg S, Schmid H-J. A material-based quality concept for
polymer laser sintering. In: 24th Annual International Solid Freeform Fabrication
Symposium . Vol 24. ; 2013:44-54. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf'
apa: Josupeit, S., Rüsenberg, S., & Schmid, H.-J. (2013). A material-based quality
concept for polymer laser sintering. In 24th Annual International Solid Freeform
Fabrication Symposium (Vol. 24, pp. 44–54). http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Rüsenberg_Schmid_2013, title={A material-based
quality concept for polymer laser sintering}, volume={24}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf},
booktitle={24th Annual International Solid Freeform Fabrication Symposium }, author={Josupeit,
Stefan and Rüsenberg, Stefan and Schmid, Hans-Joachim}, year={2013}, pages={44–54}
}'
chicago: Josupeit, Stefan, Stefan Rüsenberg, and Hans-Joachim Schmid. “A Material-Based
Quality Concept for Polymer Laser Sintering.” In 24th Annual International
Solid Freeform Fabrication Symposium , 24:44–54, 2013. http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.
ieee: S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “A material-based quality concept
for polymer laser sintering,” in 24th Annual International Solid Freeform Fabrication
Symposium , 2013, vol. 24, pp. 44–54.
mla: Josupeit, Stefan, et al. “A Material-Based Quality Concept for Polymer Laser
Sintering.” 24th Annual International Solid Freeform Fabrication Symposium
, vol. 24, 2013, pp. 44–54, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.
short: 'S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: 24th Annual International Solid
Freeform Fabrication Symposium , 2013, pp. 44–54.'
date_created: 2021-05-14T07:46:04Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf
intvolume: ' 24'
language:
- iso: eng
page: 44-54
publication: '24th Annual International Solid Freeform Fabrication Symposium '
status: public
title: A material-based quality concept for polymer laser sintering
type: conference
user_id: '71545'
volume: 24
year: '2013'
...
---
_id: '22192'
abstract:
- lang: eng
text: Laser Sintering is a powder based additive manufacturing technology. The amount
of used powder, which is not sintered, can be refreshed and used for further building
jobs. Due to cost reduction, better mechanical properties and a simpler processing
it is reasonable to combine virgin and used powder for part manufacturing. During
the building time the powder is thermally loaded and its structure is changed.
State of the art in laser sintering is a defined powder ratio. Since the powder
ageing depends on the individual history of sintering, this procedure cannot ensure
a defined powder quality. However, for a serial production it is necessary to
characterize the raw material, as well as all other steps along the process chain,
in order to ensure a high reproducibility and reliability. Rheological, physical
and particle properties are considered to correlate powder and chosen material
properties. Different powder qualities adjusted by the Melt Volume Rate (MVR)
are tested using promising rheological properties like viscosity or molecular
weight. Investigations about powder bed density, bulk properties as well as thermal
characterization complement the experimental setup. These parameters are correlated
with mechanical, electrical, thermal and physical material properties of laser
sintered parts. The most important influencing factors along the process chain
are kept constant. At the end a procedure is shown to obtain a defined powder
quality. This procedure will be transferred to other materials and will be tested
using other laser sintering machines of the same type as well as other types.
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Rüsenberg S, Schmid H-J. Advanced characterization method of Nylon 12 materials
for application in laser sinter processing. In: International Conference of
the Polymer-Processing-Society (PPS). Vol 29. ; 2013. doi:10.1063/1.4873877'
apa: Rüsenberg, S., & Schmid, H.-J. (2013). Advanced characterization method
of Nylon 12 materials for application in laser sinter processing. In International
Conference of the Polymer-Processing-Society (PPS) (Vol. 29). https://doi.org/10.1063/1.4873877
bibtex: '@inproceedings{Rüsenberg_Schmid_2013, title={Advanced characterization
method of Nylon 12 materials for application in laser sinter processing}, volume={29},
DOI={10.1063/1.4873877}, booktitle={International
Conference of the Polymer-Processing-Society (PPS)}, author={Rüsenberg, Stefan
and Schmid, Hans-Joachim}, year={2013} }'
chicago: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization
Method of Nylon 12 Materials for Application in Laser Sinter Processing.” In International
Conference of the Polymer-Processing-Society (PPS), Vol. 29, 2013. https://doi.org/10.1063/1.4873877.
ieee: S. Rüsenberg and H.-J. Schmid, “Advanced characterization method of Nylon
12 materials for application in laser sinter processing,” in International
Conference of the Polymer-Processing-Society (PPS), 2013, vol. 29.
mla: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization Method
of Nylon 12 Materials for Application in Laser Sinter Processing.” International
Conference of the Polymer-Processing-Society (PPS), vol. 29, 2013, doi:10.1063/1.4873877.
short: 'S. Rüsenberg, H.-J. Schmid, in: International Conference of the Polymer-Processing-Society
(PPS), 2013.'
date_created: 2021-05-14T07:46:24Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1063/1.4873877
intvolume: ' 29'
language:
- iso: eng
publication: International Conference of the Polymer-Processing-Society (PPS)
status: public
title: Advanced characterization method of Nylon 12 materials for application in laser
sinter processing
type: conference
user_id: '71545'
volume: 29
year: '2013'
...
---
_id: '22197'
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Rüsenberg S, Schmid H-J. Mechanische und rheologische Untersuchungen
neuer Laser Sinter Materialien. In: Merseburger Rapid Prototyping Forum.
Vol 7. ; 2013. doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf'
apa: Josupeit, S., Rüsenberg, S., & Schmid, H.-J. (2013). Mechanische und rheologische
Untersuchungen neuer Laser Sinter Materialien. In Merseburger Rapid Prototyping
Forum (Vol. 7). https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf
bibtex: '@inproceedings{Josupeit_Rüsenberg_Schmid_2013, title={Mechanische und rheologische
Untersuchungen neuer Laser Sinter Materialien}, volume={7}, DOI={https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf},
booktitle={Merseburger Rapid Prototyping Forum}, author={Josupeit, Stefan and
Rüsenberg, Stefan and Schmid, Hans-Joachim}, year={2013} }'
chicago: Josupeit, Stefan, Stefan Rüsenberg, and Hans-Joachim Schmid. “Mechanische
Und Rheologische Untersuchungen Neuer Laser Sinter Materialien.” In Merseburger
Rapid Prototyping Forum, Vol. 7, 2013. https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.
ieee: S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “Mechanische und rheologische
Untersuchungen neuer Laser Sinter Materialien,” in Merseburger Rapid Prototyping
Forum, 2013, vol. 7.
mla: Josupeit, Stefan, et al. “Mechanische Und Rheologische Untersuchungen Neuer
Laser Sinter Materialien.” Merseburger Rapid Prototyping Forum, vol. 7,
2013, doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.
short: 'S. Josupeit, S. Rüsenberg, H.-J. Schmid, in: Merseburger Rapid Prototyping
Forum, 2013.'
date_created: 2021-05-14T07:46:29Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf
intvolume: ' 7'
language:
- iso: eng
publication: Merseburger Rapid Prototyping Forum
status: public
title: Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien
type: conference
user_id: '71545'
volume: 7
year: '2013'
...
---
_id: '22201'
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: J.
full_name: Büsching, J.
last_name: Büsching
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Rüsenberg S, Bagsik A, Büsching J, Schmid H-J. Additiv versus Konventionell:
Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie. In: RapidTech.
; 2013.'
apa: 'Rüsenberg, S., Bagsik, A., Büsching, J., & Schmid, H.-J. (2013). Additiv
versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie.
In RapidTech.'
bibtex: '@inproceedings{Rüsenberg_Bagsik_Büsching_Schmid_2013, title={Additiv versus
Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie},
booktitle={RapidTech}, author={Rüsenberg, Stefan and Bagsik, A. and Büsching,
J. and Schmid, Hans-Joachim}, year={2013} }'
chicago: 'Rüsenberg, Stefan, A. Bagsik, J. Büsching, and Hans-Joachim Schmid. “Additiv
versus Konventionell: Benchmarking Am Beispiel Eines Designs Aus Der Luftfahrtindustrie.”
In RapidTech, 2013.'
ieee: 'S. Rüsenberg, A. Bagsik, J. Büsching, and H.-J. Schmid, “Additiv versus Konventionell:
Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie,” in RapidTech,
2013.'
mla: 'Rüsenberg, Stefan, et al. “Additiv versus Konventionell: Benchmarking Am Beispiel
Eines Designs Aus Der Luftfahrtindustrie.” RapidTech, 2013.'
short: 'S. Rüsenberg, A. Bagsik, J. Büsching, H.-J. Schmid, in: RapidTech, 2013.'
date_created: 2021-05-14T07:46:34Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
language:
- iso: eng
publication: RapidTech
status: public
title: 'Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der
Luftfahrtindustrie'
type: conference
user_id: '71545'
year: '2013'
...
---
_id: '22373'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Adam G, Zimmer D. Design for additive manufacturing. In: ; 2013.'
apa: Adam, G., & Zimmer, D. (2013). Design for additive manufacturing.
bibtex: '@inproceedings{Adam_Zimmer_2013, title={Design for additive manufacturing},
author={Adam, Guido and Zimmer, Detmar}, year={2013} }'
chicago: Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing,” 2013.
ieee: G. Adam and D. Zimmer, “Design for additive manufacturing,” 2013.
mla: Adam, Guido, and Detmar Zimmer. Design for Additive Manufacturing. 2013.
short: 'G. Adam, D. Zimmer, in: 2013.'
date_created: 2021-06-15T11:08:55Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
status: public
title: Design for additive manufacturing
type: conference
user_id: '38077'
year: '2013'
...
---
_id: '22374'
abstract:
- lang: eng
text: Additive Fertigungsverfahren stellen Bauteile und Baugruppen aus Kunststoff-
oder Metallwerkstoffen schicht¬weise, ohne formgebendes Werkzeug her. Daraus resultierende
Gestaltungsmöglichkeiten schaffen einen großen Nutzen für Anwender dieser Technologie.
Um diesen Nutzen einem breiten An-wenderkreis zugänglich zu machen, werden im
Projekt „Direct Manufacturing Design Rules“ (DMDR) Konstruktionsregeln für Additive
Fertigungsverfahren erarbeitet. Hierzu wird zunächst eine verfahrens-unabhängige
Methode zur Erarbeitung der Konstruktionsregeln entwickelt. Diese ermöglicht die
Erar-beitung von Konstruktionsregeln, die zunächst für die hier betrachteten Additiven
Fertigungsverfahren und Werkstoffe gelten. Die Ergebnisse werden in einem Konstruktionsregelkatalog
zusammengefasst.
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Adam G, Zimmer D. Konstruktionsregeln für additive Fertigungsverfahren . Konstruktion.
2013;7(8):77-82. doi:https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren
apa: Adam, G., & Zimmer, D. (2013). Konstruktionsregeln für additive Fertigungsverfahren
. Konstruktion, 7(8), 77–82. https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren
bibtex: '@article{Adam_Zimmer_2013, title={Konstruktionsregeln für additive Fertigungsverfahren
}, volume={7}, DOI={https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren
}, number={8}, journal={Konstruktion}, author={Adam, Guido and Zimmer, Detmar},
year={2013}, pages={77–82} }'
chicago: 'Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigungsverfahren
.” Konstruktion 7, no. 8 (2013): 77–82. https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren
.'
ieee: G. Adam and D. Zimmer, “Konstruktionsregeln für additive Fertigungsverfahren
,” Konstruktion, vol. 7, no. 8, pp. 77–82, 2013.
mla: Adam, Guido, and Detmar Zimmer. “Konstruktionsregeln Für Additive Fertigungsverfahren
.” Konstruktion, vol. 7, no. 8, 2013, pp. 77–82, doi:https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren
.
short: G. Adam, D. Zimmer, Konstruktion 7 (2013) 77–82.
date_created: 2021-06-15T11:08:57Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 'https://www.researchgate.net/publication/274190643_Konstruktionsregeln_fur_additive_Fertigungsverfahren '
intvolume: ' 7'
issue: '8'
language:
- iso: eng
page: 77-82
publication: Konstruktion
status: public
title: 'Konstruktionsregeln für additive Fertigungsverfahren '
type: journal_article
user_id: '38077'
volume: 7
year: '2013'
...
---
_id: '22375'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: 'Adam G. Die Potentiale additiver Fertigung nutzen. In: ; 2013.'
apa: Adam, G. (2013). Die Potentiale additiver Fertigung nutzen.
bibtex: '@inproceedings{Adam_2013, title={Die Potentiale additiver Fertigung nutzen},
author={Adam, Guido}, year={2013} }'
chicago: Adam, Guido. “Die Potentiale Additiver Fertigung Nutzen,” 2013.
ieee: G. Adam, “Die Potentiale additiver Fertigung nutzen,” 2013.
mla: Adam, Guido. Die Potentiale Additiver Fertigung Nutzen. 2013.
short: 'G. Adam, in: 2013.'
date_created: 2021-06-15T11:08:58Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
status: public
title: Die Potentiale additiver Fertigung nutzen
type: conference
user_id: '38077'
year: '2013'
...
---
_id: '22376'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: 'Adam G. Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung,
Lehre. In: ; 2013.'
apa: Adam, G. (2013). Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung,
Lehre.
bibtex: '@inproceedings{Adam_2013, title={Konstruktionsregeln für additive Fertigungsverfahren
- Ausbildung, Lehre}, author={Adam, Guido}, year={2013} }'
chicago: Adam, Guido. “Konstruktionsregeln Für Additive Fertigungsverfahren - Ausbildung,
Lehre,” 2013.
ieee: G. Adam, “Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung,
Lehre,” 2013.
mla: Adam, Guido. Konstruktionsregeln Für Additive Fertigungsverfahren - Ausbildung,
Lehre. 2013.
short: 'G. Adam, in: 2013.'
date_created: 2021-06-15T11:08:59Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
status: public
title: Konstruktionsregeln für additive Fertigungsverfahren - Ausbildung, Lehre
type: conference
user_id: '38077'
year: '2013'
...
---
_id: '21682'
abstract:
- lang: eng
text: At first sight the direct costs of Additive Manufacturing (AM) seem too high
in comparison to traditional manufacturing. Considering the whole lifecycle costs
of parts changes the point of view. Due to the modification of the new production
process and new supply chains during a parts lifecycle, producing companies can
strongly benefit from AM. Therefore, a costing model for assessing lifecycle costs
with regard to specific applications and branches has been developed. The costing
model represents the advantages of AM monetarily. For the evaluation of this model
and the influence factors, different case studies have been performed including
different approaches in part redesign. Deeper research is and will be carried
out with respect to the AM building rates and the comparability of various AM
machines, as these facts are hardly comparable for end users. This paper will
present the methodology and some results of the case studies conducted over the
whole product lifecycle.
author:
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: M.
full_name: Moi, M.
last_name: Moi
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Impact and Influence Factors of Additive
Manufacturing on Product Lifecycle Costs. In: 24th Annual International Solid
Freeform Fabrication Symposium. Vol 24. ; 2013:998-1008. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf'
apa: Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2013). Impact and Influence
Factors of Additive Manufacturing on Product Lifecycle Costs. In 24th Annual
International Solid Freeform Fabrication Symposium (Vol. 24, pp. 998–1008).
http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf
bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2013, title={Impact and Influence
Factors of Additive Manufacturing on Product Lifecycle Costs}, volume={24}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf},
booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2013}, pages={998–1008} }'
chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Impact and Influence Factors
of Additive Manufacturing on Product Lifecycle Costs.” In 24th Annual International
Solid Freeform Fabrication Symposium, 24:998–1008, 2013. http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf.
ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Impact and Influence Factors
of Additive Manufacturing on Product Lifecycle Costs,” in 24th Annual International
Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 998–1008.
mla: Lindemann, C., et al. “Impact and Influence Factors of Additive Manufacturing
on Product Lifecycle Costs.” 24th Annual International Solid Freeform Fabrication
Symposium, vol. 24, 2013, pp. 998–1008, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf.
short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International
Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.'
date_created: 2021-04-21T06:40:35Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf
intvolume: ' 24'
language:
- iso: eng
page: 998-1008
publication: 24th Annual International Solid Freeform Fabrication Symposium
publication_identifier:
isbn:
- 1053-2153
status: public
title: Impact and Influence Factors of Additive Manufacturing on Product Lifecycle
Costs
type: conference
user_id: '55833'
volume: 24
year: '2013'
...
---
_id: '22017'
abstract:
- lang: eng
text: Fused Deposition Modeling (FDM) parts are typically subject to process-related
rough or wavy surfaces, with stair-stepping effects whenever the parts produced
have sloped or rounded part geometries; however, the level of optical quality
frequently required demands that parts feature a smooth surface. In this paper,
the results of a high-energy finishing process, which uses a disc finishing unit
and is designed for parts manufactured with the material Ultem*9085, are presented.
The analysis discusses the surface-smoothing effect of various finishing materials
with varying geometries, as well as the effect of finishing time and speed. Additionally,
the efficiency of the surface treatment has been analyzed specifically at corners,
edges and in cavities.
author:
- first_name: M.
full_name: Fischer, M.
last_name: Fischer
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Fischer M, Schöppner V. Some Investigations Regarding the Surface Treatment
of Ultem 9085 Parts Manufactured with Fused Deposition Modeling. In: 24th Annual
International Solid Freeform Fabrication Symposium. Vol 24. ; 2013:805-815.
doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf'
apa: Fischer, M., & Schöppner, V. (2013). Some Investigations Regarding the
Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.
24th Annual International Solid Freeform Fabrication Symposium, 24,
805–815. http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf
bibtex: '@inproceedings{Fischer_Schöppner_2013, title={Some Investigations Regarding
the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling},
volume={24}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf},
booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Fischer,
M. and Schöppner, Volker}, year={2013}, pages={805–815} }'
chicago: Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface
Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.” In
24th Annual International Solid Freeform Fabrication Symposium, 24:805–15,
2013. http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
ieee: 'M. Fischer and V. Schöppner, “Some Investigations Regarding the Surface Treatment
of Ultem 9085 Parts Manufactured with Fused Deposition Modeling,” in 24th Annual
International Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 805–815,
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.'
mla: Fischer, M., and Volker Schöppner. “Some Investigations Regarding the Surface
Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling.” 24th
Annual International Solid Freeform Fabrication Symposium, vol. 24, 2013,
pp. 805–15, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
short: 'M. Fischer, V. Schöppner, in: 24th Annual International Solid Freeform Fabrication
Symposium, 2013, pp. 805–815.'
date_created: 2021-05-07T13:22:55Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf
intvolume: ' 24'
language:
- iso: eng
page: 805-815
publication: 24th Annual International Solid Freeform Fabrication Symposium
status: public
title: Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured
with Fused Deposition Modeling
type: conference
user_id: '70729'
volume: 24
year: '2013'
...
---
_id: '42097'
author:
- first_name: 'Tobias '
full_name: 'Becker, Tobias '
last_name: Becker
citation:
ama: 'Becker T. Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen Durch Interaktive SOPs .; 2013.'
apa: 'Becker, T. (2013). Qualitätsmanagement in der zivilen Gefahrenabwehr :
Optimierung von Führungsprozessen durch interaktive SOPs .'
bibtex: '@book{Becker_2013, title={Qualitätsmanagement in der zivilen Gefahrenabwehr :
Optimierung von Führungsprozessen durch interaktive SOPs }, author={Becker, Tobias
}, year={2013} }'
chicago: 'Becker, Tobias . Qualitätsmanagement in Der Zivilen Gefahrenabwehr :
Optimierung von Führungsprozessen Durch Interaktive SOPs , 2013.'
ieee: 'T. Becker, Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen durch interaktive SOPs . 2013.'
mla: 'Becker, Tobias. Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen Durch Interaktive SOPs . 2013.'
short: 'T. Becker, Qualitätsmanagement in Der Zivilen Gefahrenabwehr : Optimierung
von Führungsprozessen Durch Interaktive SOPs , 2013.'
date_created: 2023-02-14T12:46:54Z
date_updated: 2023-02-14T12:47:00Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
language:
- iso: eng
- iso: ger
main_file_link:
- url: https://digital.ub.uni-paderborn.de/ubpb/urn/urn:nbn:de:hbz:466:2-12597
page: '181'
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: 'Qualitätsmanagement in der zivilen Gefahrenabwehr : Optimierung von Führungsprozessen
durch interaktive SOPs '
type: dissertation
user_id: '55833'
year: '2013'
...
---
_id: '22174'
abstract:
- lang: eng
text: The quality of laser sintered parts, in this work, manufactured by polymer
laser sintering by using an EOSINT P395 Laser Sintering system, depends on several
steps along the process chain. The first step is the characterization of the powder
quality, whereas the rheological and physical investigations of nylon 12 powder
are shown. By changing some important influencing factors, for example the powder
ratio, the powder ageing and the moisture content, the influence on mechanical
and physical properties, density and porosity, are investigated. The composition
of the used powder is known. The previous process (storage conditions, etc.) as
well as the laser sintering process (regarding energy density, temperature, etc.)
is kept constant for the duration of this work. Regarding the post process in
this work the cooling down phase is investigated as well. With an automatically
blasting system it is possible to keep the post process parameters blasting distance
and blasting time, constant. All of the tests will be performed using dry and
conditioned test specimens. This work is showing the dependence on mechanical,
rheological and physical parameters by varying important influencing factors along
the laser sintering process quality chain.
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: R.
full_name: Weiffen, R.
last_name: Weiffen
- first_name: F.
full_name: Knoop, F.
last_name: Knoop
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Rüsenberg S, Weiffen R, Knoop F, Schmid H-J. Controlling the Quality of Laser
Sintered Parts Along the Process Chain. In: 23rd Annual International Solid
Freeform Fabrication Symposium. Vol 23. ; 2012:1024-1044. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf'
apa: Rüsenberg, S., Weiffen, R., Knoop, F., & Schmid, H.-J. (2012). Controlling
the Quality of Laser Sintered Parts Along the Process Chain. In 23rd Annual
International Solid Freeform Fabrication Symposium (Vol. 23, pp. 1024–1044).
http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
bibtex: '@inproceedings{Rüsenberg_Weiffen_Knoop_Schmid_2012, title={Controlling
the Quality of Laser Sintered Parts Along the Process Chain}, volume={23}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Rüsenberg,
Stefan and Weiffen, R. and Knoop, F. and Schmid, Hans-Joachim}, year={2012}, pages={1024–1044}
}'
chicago: Rüsenberg, Stefan, R. Weiffen, F. Knoop, and Hans-Joachim Schmid. “Controlling
the Quality of Laser Sintered Parts Along the Process Chain.” In 23rd Annual
International Solid Freeform Fabrication Symposium, 23:1024–44, 2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
ieee: S. Rüsenberg, R. Weiffen, F. Knoop, and H.-J. Schmid, “Controlling the Quality
of Laser Sintered Parts Along the Process Chain,” in 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 1024–1044.
mla: Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts
Along the Process Chain.” 23rd Annual International Solid Freeform Fabrication
Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
short: 'S. Rüsenberg, R. Weiffen, F. Knoop, H.-J. Schmid, in: 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, pp. 1024–1044.'
date_created: 2021-05-14T07:46:03Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
intvolume: ' 23'
language:
- iso: eng
page: 1024-1044
publication: 23rd Annual International Solid Freeform Fabrication Symposium
status: public
title: Controlling the Quality of Laser Sintered Parts Along the Process Chain
type: conference
user_id: '71545'
volume: 23
year: '2012'
...
---
_id: '22204'
abstract:
- lang: eng
text: Material properties of parts from additive manufacturing are influenced by
a huge number of material, operational and job parameters. This work aims to identify
the most important ones and to investigate mechanical properties as depending
on those parameters. Test specimens were produced with standard PA12 powder on
an EOSINT P390 and P395, respectively. The influence of the orientation and placement
of parts in the building chamber were investigated systematically. The mechanical
properties
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Rüsenberg S, Schmid H-J. Mechanical Properties as a Result of multitude of
Parameters. In: The European Forum on Additive Manufacturing. Vol 17. ;
2012. doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf'
apa: Rüsenberg, S., & Schmid, H.-J. (2012). Mechanical Properties as a Result
of multitude of Parameters. In The European Forum on Additive Manufacturing
(Vol. 17). https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
bibtex: '@inproceedings{Rüsenberg_Schmid_2012, title={Mechanical Properties as a
Result of multitude of Parameters}, volume={17}, DOI={https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf},
booktitle={The European Forum on Additive Manufacturing}, author={Rüsenberg, Stefan
and Schmid, Hans-Joachim}, year={2012} }'
chicago: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a
Result of Multitude of Parameters.” In The European Forum on Additive Manufacturing,
Vol. 17, 2012. https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
ieee: S. Rüsenberg and H.-J. Schmid, “Mechanical Properties as a Result of multitude
of Parameters,” in The European Forum on Additive Manufacturing, 2012,
vol. 17.
mla: Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result
of Multitude of Parameters.” The European Forum on Additive Manufacturing,
vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
short: 'S. Rüsenberg, H.-J. Schmid, in: The European Forum on Additive Manufacturing,
2012.'
date_created: 2021-05-14T07:46:38Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
intvolume: ' 17'
language:
- iso: eng
publication: The European Forum on Additive Manufacturing
status: public
title: Mechanical Properties as a Result of multitude of Parameters
type: conference
user_id: '71545'
volume: 17
year: '2012'
...
---
_id: '22364'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
last_name: Zimmer
citation:
ama: 'Adam G, Zimmer D. Elementbasierte Erarbeitung von Konstruktionsregeln für
additive Fertigung. In: ; 2012.'
apa: Adam, G., & Zimmer, D. (2012). Elementbasierte Erarbeitung von Konstruktionsregeln
für additive Fertigung.
bibtex: '@inproceedings{Adam_Zimmer_2012, title={Elementbasierte Erarbeitung von
Konstruktionsregeln für additive Fertigung}, author={Adam, Guido and Zimmer, Detmar},
year={2012} }'
chicago: Adam, Guido, and Detmar Zimmer. “Elementbasierte Erarbeitung von Konstruktionsregeln
Für Additive Fertigung,” 2012.
ieee: G. Adam and D. Zimmer, “Elementbasierte Erarbeitung von Konstruktionsregeln
für additive Fertigung,” 2012.
mla: Adam, Guido, and Detmar Zimmer. Elementbasierte Erarbeitung von Konstruktionsregeln
Für Additive Fertigung. 2012.
short: 'G. Adam, D. Zimmer, in: 2012.'
date_created: 2021-06-15T11:08:45Z
date_updated: 2022-01-06T06:55:31Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
status: public
title: Elementbasierte Erarbeitung von Konstruktionsregeln für additive Fertigung
type: conference
user_id: '38077'
year: '2012'
...
---
_id: '21680'
abstract:
- lang: eng
text: The costs of additive manufactured parts often seem too high in comparison
to those of traditionally manufactured parts, as the information about major cost
drivers, especially for additive manufactured metal parts, is weak. Therefore,
a lifecycle analysis of additive manufactured parts is needed to understand and
rate the cost drivers that act as the largest contributors to unit costs, and
to provide a focus for future cost reduction activities for the Additive Manufacturing
(AM) technology. A better understanding of the cost structure will help to compare
the AM costs with the opportunity costs of the classical manufacturing technologies
and will make it easier to justify the use of AM manufactured parts. This paper
will present work in progress and methodology based on a sample investigated with
business process analysis / simulation and activity based costing. In addition,
cost drivers associated with metal AM process will be rated.
author:
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: M.
full_name: Moi, M.
last_name: Moi
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Analyzing Product Lifecycle Costs for
a Better Understanding of Cost Drivers in Additve Manufacturing. In: 23rd Annual
International Solid Freeform Fabrication Symposium. Vol 23. ; 2012:177-188.
doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf'
apa: Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2012). Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.
In 23rd Annual International Solid Freeform Fabrication Symposium (Vol.
23, pp. 177–188). http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2012, title={Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing},
volume={23}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2012}, pages={177–188} }'
chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.” In
23rd Annual International Solid Freeform Fabrication Symposium, 23:177–88,
2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in
23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol.
23, pp. 177–188.
mla: Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding
of Cost Drivers in Additve Manufacturing.” 23rd Annual International Solid
Freeform Fabrication Symposium, vol. 23, 2012, pp. 177–88, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, pp. 177–188.'
date_created: 2021-04-21T06:34:46Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
intvolume: ' 23'
language:
- iso: eng
page: 177-188
publication: 23rd Annual International Solid Freeform Fabrication Symposium
publication_identifier:
isbn:
- 1053-2153
status: public
title: Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers
in Additve Manufacturing
type: conference
user_id: '55833'
volume: 23
year: '2012'
...
---
_id: '22016'
abstract:
- lang: eng
text: Relating to the direct manufacturing of end-use parts the knowledge about
the effect of the long-term ageing of Fused Deposition Modeling (FDM) parts is
of particular importance. For this, tensile specimens were stored for time periods
of up to 52 weeks in two different conditions and the testing was conducted at
different temperatures within a temperature range of -60°C to +160°C. Further
tests were made after the exposure in multiple media. The parts were built up
with the system “Fortus 400mc” from Stratasys with the material Ultem*9085 in
two different build directions, the strongest direction X (on its side) and the
weakest build direction Z (upright) and with the standard toolpath parameters
of the Insight software version 7.0.
author:
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: E.
full_name: Klemp, E.
last_name: Klemp
citation:
ama: 'Bagsik A, Schöppner V, Klemp E. Long-Term ageing effects on Fused Deposition
Modeling Parts manufactured with ULTEM*9085. In: 23rd Annual International
Solid Freeform Fabrication Symposium. Vol 23. ; 2012:629-640. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf'
apa: Bagsik, A., Schöppner, V., & Klemp, E. (2012). Long-Term ageing effects
on Fused Deposition Modeling Parts manufactured with ULTEM*9085. 23rd Annual
International Solid Freeform Fabrication Symposium, 23, 629–640. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Long-Term ageing effects
on Fused Deposition Modeling Parts manufactured with ULTEM*9085}, volume={23},
DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Bagsik,
A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={629–640} }'
chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Long-Term Ageing Effects on
Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In 23rd Annual
International Solid Freeform Fabrication Symposium, 23:629–40, 2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused
Deposition Modeling Parts manufactured with ULTEM*9085,” in 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 629–640, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.'
mla: Bagsik, A., et al. “Long-Term Ageing Effects on Fused Deposition Modeling Parts
Manufactured with ULTEM*9085.” 23rd Annual International Solid Freeform Fabrication
Symposium, vol. 23, 2012, pp. 629–40, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 23rd Annual International Solid Freeform
Fabrication Symposium, 2012, pp. 629–640.'
date_created: 2021-05-07T13:22:54Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf
intvolume: ' 23'
language:
- iso: eng
page: 629-640
publication: 23rd Annual International Solid Freeform Fabrication Symposium
status: public
title: Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with
ULTEM*9085
type: conference
user_id: '70729'
volume: 23
year: '2012'
...