---
_id: '22443'
abstract:
- lang: eng
text: Additive Manufacturing (AM) processes generate plastic or metal parts layer-by-layer
without using formative tools. The resulting advantages highlight the capability
of AM to become an inherent part within the product development. However, process
specific challenges such as a high surface roughness, the stair-stepping effect
or geometrical deviations inhibit the industrial establishment. Thus, additively
manufactured parts often need to be post-processed using established manufacturing
processes. Many process parameters and geometrical factors influence the manufacturing
accuracy in AM which can lead to large deviations and high scatterings. Published
results concerning these deviations are also difficult to compare, because they
are based on several geometries that are manufactured using different processes,
materials and machine settings. It is emphasized that reliable tolerances for
AM are difficult to define in standards. Within this investigation, a uniform
method was developed regarding relevant test specimens to examine geometrical
deviations for Laser Beam Melting (LBM), Fused Deposition Modeling (FDM) and Selective
Laser Sintering (SLS) in order to derive geometrical tolerance values. The manufactured
test specimens were measured using tactile and optical systems to examine the
occurring geometrical deviations. The results show possible geometrical tolerance
values that were classified according to the international standard DIN EN ISO
286-1.
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Fabian
full_name: Schlenker, Fabian
last_name: Schlenker
- first_name: Vera
full_name: Denzer, Vera
last_name: Denzer
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Künneke T, Schlenker F, Denzer V, Zimmer D. Manufacturing Accuracy
In Additive Manufacturing: A Method To Determine Geometrical Tolerances. In: Special
Interest Group Meeting: Advancing Precision in Additive Manufacturing. ; 2019.
doi:https://www.euspen.eu/knowledge-base/AM19129.pdf'
apa: 'Lieneke, T., Künneke, T., Schlenker, F., Denzer, V., & Zimmer, D. (2019).
Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical
Tolerances. In Special Interest Group Meeting: Advancing Precision in Additive
Manufacturing. https://www.euspen.eu/knowledge-base/AM19129.pdf'
bibtex: '@inproceedings{Lieneke_Künneke_Schlenker_Denzer_Zimmer_2019, title={Manufacturing
Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances},
DOI={https://www.euspen.eu/knowledge-base/AM19129.pdf},
booktitle={Special Interest Group Meeting: Advancing Precision in Additive Manufacturing},
author={Lieneke, Tobias and Künneke, Thomas and Schlenker, Fabian and Denzer,
Vera and Zimmer, Detmar}, year={2019} }'
chicago: 'Lieneke, Tobias, Thomas Künneke, Fabian Schlenker, Vera Denzer, and Detmar
Zimmer. “Manufacturing Accuracy In Additive Manufacturing: A Method To Determine
Geometrical Tolerances.” In Special Interest Group Meeting: Advancing Precision
in Additive Manufacturing, 2019. https://www.euspen.eu/knowledge-base/AM19129.pdf.'
ieee: 'T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, and D. Zimmer, “Manufacturing
Accuracy In Additive Manufacturing: A Method To Determine Geometrical Tolerances,”
in Special Interest Group Meeting: Advancing Precision in Additive Manufacturing,
2019.'
mla: 'Lieneke, Tobias, et al. “Manufacturing Accuracy In Additive Manufacturing:
A Method To Determine Geometrical Tolerances.” Special Interest Group Meeting:
Advancing Precision in Additive Manufacturing, 2019, doi:https://www.euspen.eu/knowledge-base/AM19129.pdf.'
short: 'T. Lieneke, T. Künneke, F. Schlenker, V. Denzer, D. Zimmer, in: Special
Interest Group Meeting: Advancing Precision in Additive Manufacturing, 2019.'
date_created: 2021-06-15T11:10:17Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://www.euspen.eu/knowledge-base/AM19129.pdf
language:
- iso: eng
publication: 'Special Interest Group Meeting: Advancing Precision in Additive Manufacturing'
status: public
title: 'Manufacturing Accuracy In Additive Manufacturing: A Method To Determine Geometrical
Tolerances'
type: conference
user_id: '38077'
year: '2019'
...
---
_id: '22444'
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Künneke T, Zimmer D. Schall mittels Pulver dämpfen. konstruktionspraxis.
2019;6:24-26.
apa: Künneke, T., & Zimmer, D. (2019). Schall mittels Pulver dämpfen. Konstruktionspraxis,
6, 24–26.
bibtex: '@article{Künneke_Zimmer_2019, title={Schall mittels Pulver dämpfen}, volume={6},
journal={konstruktionspraxis}, publisher={Vogel Communications Groupe GmbH &
Co. KG}, author={Künneke, Thomas and Zimmer, Detmar}, year={2019}, pages={24–26}
}'
chicago: 'Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” Konstruktionspraxis
6 (2019): 24–26.'
ieee: T. Künneke and D. Zimmer, “Schall mittels Pulver dämpfen,” konstruktionspraxis,
vol. 6, pp. 24–26, 2019.
mla: Künneke, Thomas, and Detmar Zimmer. “Schall Mittels Pulver Dämpfen.” Konstruktionspraxis,
vol. 6, Vogel Communications Groupe GmbH & Co. KG, 2019, pp. 24–26.
short: T. Künneke, D. Zimmer, Konstruktionspraxis 6 (2019) 24–26.
date_created: 2021-06-15T11:10:18Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
intvolume: ' 6'
language:
- iso: eng
page: 24-26
publication: konstruktionspraxis
publication_identifier:
isbn:
- 0937-4167
publisher: Vogel Communications Groupe GmbH & Co. KG
status: public
title: Schall mittels Pulver dämpfen
type: journal_article
user_id: '38077'
volume: 6
year: '2019'
...
---
_id: '22000'
abstract:
- lang: eng
text: 'Requirement changes are a major cause for project failure. A systematic approach
to manage those changes from the very beginning should be an in-tegral part of
each development project. Although this is accepted in both sci-ence and industry,
there is no adequate approach to tackle the issue, especially in the context of
interdisciplinary systems. In this paper, a secondary analysis is done to identify
all information that is necessary to manage those changes efficiently. The demanded
information is pictured in a reference model and then mapped with the capabilities
of existing approaches. Based on this, research gaps are identified and used to
guide future research efforts. '
author:
- first_name: I.
full_name: Gräßler, I.
last_name: Gräßler
- first_name: C.
full_name: Oleff, C.
last_name: Oleff
citation:
ama: 'Gräßler I, Oleff C. Risikoorientierte Analyse und Handhabung von Anforderungsänderungen.
In: Design for X - Beiträge Zum 30. DfX-Symposium . Vol 30. ; 2019:49-60.
doi: 10.35199/dfx2019.5'
apa: Gräßler, I., & Oleff, C. (2019). Risikoorientierte Analyse und Handhabung
von Anforderungsänderungen. In Design for X - Beiträge zum 30. DfX-Symposium
(Vol. 30, pp. 49–60). https://doi.org/
10.35199/dfx2019.5
bibtex: '@inproceedings{Gräßler_Oleff_2019, title={Risikoorientierte Analyse und
Handhabung von Anforderungsänderungen}, volume={30}, DOI={ 10.35199/dfx2019.5}, booktitle={Design for X - Beiträge
zum 30. DfX-Symposium }, author={Gräßler, I. and Oleff, C.}, year={2019}, pages={49–60}
}'
chicago: Gräßler, I., and C. Oleff. “Risikoorientierte Analyse Und Handhabung von
Anforderungsänderungen.” In Design for X - Beiträge Zum 30. DfX-Symposium ,
30:49–60, 2019. https://doi.org/
10.35199/dfx2019.5.
ieee: I. Gräßler and C. Oleff, “Risikoorientierte Analyse und Handhabung von Anforderungsänderungen,”
in Design for X - Beiträge zum 30. DfX-Symposium , 2019, vol. 30, pp. 49–60.
mla: Gräßler, I., and C. Oleff. “Risikoorientierte Analyse Und Handhabung von Anforderungsänderungen.”
Design for X - Beiträge Zum 30. DfX-Symposium , vol. 30, 2019, pp. 49–60,
doi: 10.35199/dfx2019.5.
short: 'I. Gräßler, C. Oleff, in: Design for X - Beiträge Zum 30. DfX-Symposium
, 2019, pp. 49–60.'
date_created: 2021-05-05T09:39:27Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '26'
- _id: '624'
- _id: '219'
doi: ' 10.35199/dfx2019.5'
intvolume: ' 30'
page: 49-60
publication: 'Design for X - Beiträge zum 30. DfX-Symposium '
status: public
title: Risikoorientierte Analyse und Handhabung von Anforderungsänderungen
type: conference
user_id: '9138'
volume: 30
year: '2019'
...
---
_id: '22001'
abstract:
- lang: eng
text: In diesem Beitrag wird ein Ansatz vorgestellt, welcher die Bewertung des Risikos
von Anforderungsänderungen in der Entwicklung mechatronischer Systeme ermöglicht.
Ausgehend von einer Anforderungsliste werden die Wechselwirkungen in einer Requirements
Structure Matrix (RSM) teilautomatisch erfasst. Parallel werden Anforderungen
in Bezug auf ihren Ursprung („Einflussbereich“) kategorisiert und darauf aufbauend
priorisiert. Diese Priorisierung basiert auf dem Veränderungsrisiko und wird durch
die drei Kriterien „Dynamik“, „Unsicherheit der Wissensbasis“ und „Relevanz für
den Entwicklungsprozess“ charakterisiert. Das Vorgehen wird anhand strukturierter
Interviews mit Projektleitern und Entwicklern und der Fallstudie eines Pedelecs
als mechatronischem System validiert. Durch die Anwendung der Methode können disziplinübergreifende
Abhängigkeiten von Anforderungen zur Reduktion von Iterationen in der Entwicklung
mechatronischer Systeme – wie dem Pedelec – berücksichtigt werden.
author:
- first_name: I.
full_name: Gräßler, I.
last_name: Gräßler
- first_name: C.
full_name: Oleff, C.
last_name: Oleff
- first_name: P.
full_name: Scholle, P.
last_name: Scholle
citation:
ama: 'Gräßler I, Oleff C, Scholle P. Priorisierung von Anforderungen für die Entwicklung
mechatronischer Systeme. In: Fachtagung Mechatronik 2019 Paderborn. ; 2019:S.
1-6. doi: 10.17619/UNIPB/1-791'
apa: Gräßler, I., Oleff, C., & Scholle, P. (2019). Priorisierung von Anforderungen
für die Entwicklung mechatronischer Systeme. In Fachtagung Mechatronik 2019
Paderborn (p. S. 1-6). https://doi.org/
10.17619/UNIPB/1-791
bibtex: '@inproceedings{Gräßler_Oleff_Scholle_2019, title={Priorisierung von Anforderungen
für die Entwicklung mechatronischer Systeme}, DOI={
10.17619/UNIPB/1-791}, booktitle={Fachtagung Mechatronik 2019 Paderborn},
author={Gräßler, I. and Oleff, C. and Scholle, P.}, year={2019}, pages={S. 1-6}
}'
chicago: Gräßler, I., C. Oleff, and P. Scholle. “Priorisierung von Anforderungen
Für Die Entwicklung Mechatronischer Systeme.” In Fachtagung Mechatronik 2019
Paderborn, S. 1-6, 2019. https://doi.org/
10.17619/UNIPB/1-791.
ieee: I. Gräßler, C. Oleff, and P. Scholle, “Priorisierung von Anforderungen für
die Entwicklung mechatronischer Systeme,” in Fachtagung Mechatronik 2019 Paderborn,
2019, p. S. 1-6.
mla: Gräßler, I., et al. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer
Systeme.” Fachtagung Mechatronik 2019 Paderborn, 2019, p. S. 1-6, doi: 10.17619/UNIPB/1-791.
short: 'I. Gräßler, C. Oleff, P. Scholle, in: Fachtagung Mechatronik 2019 Paderborn,
2019, p. S. 1-6.'
date_created: 2021-05-05T09:39:28Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '26'
- _id: '624'
- _id: '219'
doi: ' 10.17619/UNIPB/1-791'
page: S. 1-6
publication: Fachtagung Mechatronik 2019 Paderborn
status: public
title: Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme
type: conference
user_id: '9138'
year: '2019'
...
---
_id: '22002'
abstract:
- lang: eng
text: In diesem Beitrag wird ein Ansatz vorgestellt, welcher die Bewertung des Risikos
von Anforderungsänderungen in der Entwicklung mechatronischer Systeme ermöglicht.
Ausgehend von einer Anforderungsliste werden die Wechselwirkungen in einer Requirements
Structure Matrix (RSM) teilautomatisch erfasst. Parallel werden Anforderungen
in Bezug auf ihren Ursprung („Einflussbereich“) kategorisiert und darauf aufbauend
priorisiert. Diese Priorisierung basiert auf dem Veränderungsrisiko und wird durch
die drei Kriterien „Dynamik“, „Unsicherheit der Wissensbasis“ und „Relevanz für
den Entwicklungsprozess“ charakterisiert. Das Vorgehen wird anhand strukturierter
Interviews mit Projektleitern und Entwicklern und der Fallstudie eines Pedelecs
als mechatronischem System validiert. Durch die Anwendung der Methode können disziplinübergreifende
Abhängigkeiten von Anforderungen zur Reduktion von Iterationen in der Entwicklung
mechatronischer Systeme – wie dem Pedelec – berücksichtigt werden.
author:
- first_name: I.
full_name: Gräßler, I.
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: H.
full_name: Thiele, H.
last_name: Thiele
- first_name: C.
full_name: Oleff, C.
last_name: Oleff
- first_name: P.
full_name: Scholle, P.
last_name: Scholle
- first_name: V.
full_name: Schulze, V.
last_name: Schulze
citation:
ama: 'Gräßler I, Thiele H, Oleff C, Scholle P, Schulze V. Priorisierung von Anforderungen
für die Entwicklung mechatronischer Systeme. In: International Conference on
Engineering Design (ICED19). ; 2019:1265-1274. doi:10.17619/UNIPB/1-791'
apa: Gräßler, I., Thiele, H., Oleff, C., Scholle, P., & Schulze, V. (2019).
Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme. In
International Conference on Engineering Design (ICED19) (pp. 1265–1274).
https://doi.org/10.17619/UNIPB/1-791
bibtex: '@inproceedings{Gräßler_Thiele_Oleff_Scholle_Schulze_2019, title={Priorisierung
von Anforderungen für die Entwicklung mechatronischer Systeme}, DOI={10.17619/UNIPB/1-791},
booktitle={International Conference on Engineering Design (ICED19)}, author={Gräßler,
I. and Thiele, H. and Oleff, C. and Scholle, P. and Schulze, V.}, year={2019},
pages={1265–1274} }'
chicago: Gräßler, I., H. Thiele, C. Oleff, P. Scholle, and V. Schulze. “Priorisierung
von Anforderungen Für Die Entwicklung Mechatronischer Systeme.” In International
Conference on Engineering Design (ICED19), 1265–74, 2019. https://doi.org/10.17619/UNIPB/1-791.
ieee: I. Gräßler, H. Thiele, C. Oleff, P. Scholle, and V. Schulze, “Priorisierung
von Anforderungen für die Entwicklung mechatronischer Systeme,” in International
Conference on Engineering Design (ICED19), 2019, pp. 1265–1274.
mla: Gräßler, I., et al. “Priorisierung von Anforderungen Für Die Entwicklung Mechatronischer
Systeme.” International Conference on Engineering Design (ICED19), 2019,
pp. 1265–74, doi:10.17619/UNIPB/1-791.
short: 'I. Gräßler, H. Thiele, C. Oleff, P. Scholle, V. Schulze, in: International
Conference on Engineering Design (ICED19), 2019, pp. 1265–1274.'
date_created: 2021-05-05T09:39:29Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '26'
- _id: '624'
- _id: '219'
doi: 10.17619/UNIPB/1-791
language:
- iso: eng
page: 1265-1274
publication: International Conference on Engineering Design (ICED19)
status: public
title: Priorisierung von Anforderungen für die Entwicklung mechatronischer Systeme
type: conference
user_id: '14931'
year: '2019'
...
---
_id: '22022'
abstract:
- lang: eng
text: Due to the great popularity of the Fused Deposition Modeling (FDM) process,
the material market is growing. In particular, processing of high-temperature
materials such as PEEK is demanding. The aim of the investigations is to test
different PEEK materials regarding their processability in the FDM process. An
unreinforced PEEK, a thermally conductive PEEK as well as a carbon fiber reinforced
PEEK are investigated. The processability is assessed with the help of the weld
seam strength. The assessment of the weld seam strength is carried out by building
tests. For this purpose, a special method developed at the DMRC is used. In addition,
a welding width factor between the strands deposited on each other is calculated
and compared. Finally, a welding factor is determined to enable the comparison
between the different materials. With this procedure, the influence of varying
nozzle and build chamber temperatures on the achievable weld seam strengths is
evaluated.
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Julian
full_name: Wächter, Julian
id: '29588'
last_name: Wächter
- first_name: M.
full_name: Elsner, M.
last_name: Elsner
citation:
ama: 'Moritzer E, Wächter J, Elsner M. Investigation of the Processability of Different
PEEK Materials in the FDM Process with Regard to the Weld Seam Strength. In: 30th
Annual International Solid Freeform Fabrication Symposium. Vol 30. ; 2019:856-863.
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf'
apa: Moritzer, E., Wächter, J., & Elsner, M. (2019). Investigation of the Processability
of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength.
30th Annual International Solid Freeform Fabrication Symposium, 30,
856–863. http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf
bibtex: '@inproceedings{Moritzer_Wächter_Elsner_2019, title={Investigation of the
Processability of Different PEEK Materials in the FDM Process with Regard to the
Weld Seam Strength}, volume={30}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf},
booktitle={30th Annual International Solid Freeform Fabrication Symposium}, author={Moritzer,
Elmar and Wächter, Julian and Elsner, M.}, year={2019}, pages={856–863} }'
chicago: Moritzer, Elmar, Julian Wächter, and M. Elsner. “Investigation of the Processability
of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength.”
In 30th Annual International Solid Freeform Fabrication Symposium, 30:856–63,
2019. http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
ieee: 'E. Moritzer, J. Wächter, and M. Elsner, “Investigation of the Processability
of Different PEEK Materials in the FDM Process with Regard to the Weld Seam Strength,”
in 30th Annual International Solid Freeform Fabrication Symposium, 2019,
vol. 30, pp. 856–863, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.'
mla: Moritzer, Elmar, et al. “Investigation of the Processability of Different PEEK
Materials in the FDM Process with Regard to the Weld Seam Strength.” 30th Annual
International Solid Freeform Fabrication Symposium, vol. 30, 2019, pp. 856–63,
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf.
short: 'E. Moritzer, J. Wächter, M. Elsner, in: 30th Annual International Solid
Freeform Fabrication Symposium, 2019, pp. 856–863.'
date_created: 2021-05-07T13:23:01Z
date_updated: 2022-01-06T06:55:22Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2019/074%20Investigation%20of%20The%20Processability%20of%20Different%20P.pdf
intvolume: ' 30'
language:
- iso: eng
page: 856-863
publication: 30th Annual International Solid Freeform Fabrication Symposium
status: public
title: Investigation of the Processability of Different PEEK Materials in the FDM
Process with Regard to the Weld Seam Strength
type: conference
user_id: '70729'
volume: 30
year: '2019'
...
---
_id: '22047'
abstract:
- lang: eng
text: Plastic freeforming (PF) is an additive-manufacturing process for producing
three-dimensional plastic parts based on 3D CAD data by applying plastic droplets
in layers. This process is used to produce customer-specific and complex geometries
(prototypes and small series) on organic sheets. A comparable serial process is
the injection of a second component onto organic sheets by injection molding.
A sufficient bond between the PF structure and the organic sheets is of particular
importance for each application. If this is not guaranteed, the composite system
cannot withstand the mechanical load and fails. The force exerted on the system
can no longer be transmitted between the PF structure and the organic sheet. The
organic sheet is made of glass fiber-reinforced polypropylene (PP). The connection
between the organic sheet and the PF structure is achieved by welding the molten
polymer droplets and the surface of the organic sheet. The PF structures are made
of PP to ensure sufficient compatibility with regard to the weldability of the
components. The processing of PP in the PF process is a challenge because PP is
a semicrystalline material. The shrinkage of semi-crystalline materials is significantly
higher compared to amorphous materials. Due to the layered structure of the components,
the shrinkage of the individual layers results in undesired warpage. The adhesive
strength between the organic sheet and the PF structure is investigated by determining
the bending strength in the 3-point bending test. The investigations include an
optimization of the process parameters to maximize the adhesive strength. The
experimental investigations show that an increase of the nozzle and build chamber
temperature leads to a higher adhesive strength. In further investigations, the
temperature of the nozzle shows no significant influence on the surface temperature
despite the expected heat radiation. The surface temperature is almost only dependent
on the temperature of the build chamber.
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: André
full_name: Hirsch, André
id: '27599'
last_name: Hirsch
- first_name: H.P.
full_name: Heim, H.P.
last_name: Heim
- first_name: C.
full_name: Cherif, C.
last_name: Cherif
- first_name: W.
full_name: Truemper, W.
last_name: Truemper
citation:
ama: 'Moritzer E, Hirsch A, Heim HP, Cherif C, Truemper W. Plastic droplet welding:
bond strength between plastic freeforming structures and continuous fiber-reinforced
thermoplastic composites. Welding in the World. 2019;63:867-873. doi:10.1007/s40194-019-00714-3'
apa: 'Moritzer, E., Hirsch, A., Heim, H. P., Cherif, C., & Truemper, W. (2019).
Plastic droplet welding: bond strength between plastic freeforming structures
and continuous fiber-reinforced thermoplastic composites. Welding in the World,
63, 867–873. https://doi.org/10.1007/s40194-019-00714-3'
bibtex: '@article{Moritzer_Hirsch_Heim_Cherif_Truemper_2019, title={Plastic droplet
welding: bond strength between plastic freeforming structures and continuous fiber-reinforced
thermoplastic composites}, volume={63}, DOI={10.1007/s40194-019-00714-3},
journal={Welding in the World}, publisher={Springer}, author={Moritzer, Elmar
and Hirsch, André and Heim, H.P. and Cherif, C. and Truemper, W.}, year={2019},
pages={867–873} }'
chicago: 'Moritzer, Elmar, André Hirsch, H.P. Heim, C. Cherif, and W. Truemper.
“Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures
and Continuous Fiber-Reinforced Thermoplastic Composites.” Welding in the World
63 (2019): 867–73. https://doi.org/10.1007/s40194-019-00714-3.'
ieee: 'E. Moritzer, A. Hirsch, H. P. Heim, C. Cherif, and W. Truemper, “Plastic
droplet welding: bond strength between plastic freeforming structures and continuous
fiber-reinforced thermoplastic composites,” Welding in the World, vol.
63, pp. 867–873, 2019, doi: 10.1007/s40194-019-00714-3.'
mla: 'Moritzer, Elmar, et al. “Plastic Droplet Welding: Bond Strength between Plastic
Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.”
Welding in the World, vol. 63, Springer, 2019, pp. 867–73, doi:10.1007/s40194-019-00714-3.'
short: E. Moritzer, A. Hirsch, H.P. Heim, C. Cherif, W. Truemper, Welding in the
World 63 (2019) 867–873.
date_created: 2021-05-07T13:23:30Z
date_updated: 2022-04-25T08:01:09Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1007/s40194-019-00714-3
intvolume: ' 63'
language:
- iso: eng
page: 867-873
publication: Welding in the World
publisher: Springer
quality_controlled: '1'
status: public
title: 'Plastic droplet welding: bond strength between plastic freeforming structures
and continuous fiber-reinforced thermoplastic composites'
type: journal_article
user_id: '70729'
volume: 63
year: '2019'
...
---
_id: '22028'
abstract:
- lang: eng
text: The mechanical properties of thin-walled plastic components are limited. One
approach to improve the strength or stiffness of these components is to reinforce
the thin-walled areas with an individually adapted Fused Deposition Modeling structure.
Fused Deposition Modeling (FDM) is one of the most commonly used additive manufacturing
processes. This process is characterized by the deposition of a fused, thermoplastic
filament. Depending on the form of the reinforcement structure, the resulting
hybrid structure should show higher strength or stiffness. The objective of the
project is to determine constructive design and process guidelines for FDM structures.
The FDM structure is to be used as a partial reinforcement for lightweight components
and be adapted to the respective load conditions. Because of the lightweight application,
the FDM structure should also have the lowest possible weight. The optimization
of the FDM parts for different load cases is realized by adapting the design parameters.
These parameters influence the layer generation and therefore also the inner structure
of the FDM parts. In preliminary studies, the manufacturing restrictions of the
FDM process are defined. The specimens are manufactured based on the Design of
Experiments. To determine the static strength properties, different tests (tensile,
compression, flexural, torsion and impact) are carried out. The investigations
show that the filling strategy affects the mechanical properties. As a result
of the investigations, design and process guidelines for the FDM structures are
established according to the load conditions.
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: André
full_name: Hirsch, André
id: '27599'
last_name: Hirsch
- first_name: Franziska Isabelle
full_name: Bürenhaus, Franziska Isabelle
id: '41055'
last_name: Bürenhaus
citation:
ama: 'Moritzer E, Hirsch A, Bürenhaus FI. Development and Modeling of Design and
Process Guidelines for FDM Structures for the Partial Reinforcement of Hybrid
Structures. In: AIP Conference Proceedings. Vol 2065. AIP Publishing; 2019.
doi:10.1063/1.5088314'
apa: Moritzer, E., Hirsch, A., & Bürenhaus, F. I. (2019). Development and Modeling
of Design and Process Guidelines for FDM Structures for the Partial Reinforcement
of Hybrid Structures. AIP Conference Proceedings, 2065(1). https://doi.org/10.1063/1.5088314
bibtex: '@inproceedings{Moritzer_Hirsch_Bürenhaus_2019, title={Development and Modeling
of Design and Process Guidelines for FDM Structures for the Partial Reinforcement
of Hybrid Structures}, volume={2065}, DOI={10.1063/1.5088314},
number={1}, booktitle={AIP Conference Proceedings}, publisher={AIP Publishing},
author={Moritzer, Elmar and Hirsch, André and Bürenhaus, Franziska Isabelle},
year={2019} }'
chicago: Moritzer, Elmar, André Hirsch, and Franziska Isabelle Bürenhaus. “Development
and Modeling of Design and Process Guidelines for FDM Structures for the Partial
Reinforcement of Hybrid Structures.” In AIP Conference Proceedings, Vol.
2065. AIP Publishing, 2019. https://doi.org/10.1063/1.5088314.
ieee: 'E. Moritzer, A. Hirsch, and F. I. Bürenhaus, “Development and Modeling of
Design and Process Guidelines for FDM Structures for the Partial Reinforcement
of Hybrid Structures,” in AIP Conference Proceedings, 2019, vol. 2065,
no. 1, doi: 10.1063/1.5088314.'
mla: Moritzer, Elmar, et al. “Development and Modeling of Design and Process Guidelines
for FDM Structures for the Partial Reinforcement of Hybrid Structures.” AIP
Conference Proceedings, vol. 2065, no. 1, AIP Publishing, 2019, doi:10.1063/1.5088314.
short: 'E. Moritzer, A. Hirsch, F.I. Bürenhaus, in: AIP Conference Proceedings,
AIP Publishing, 2019.'
date_created: 2021-05-07T13:23:08Z
date_updated: 2022-04-25T08:00:20Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.5088314
intvolume: ' 2065'
issue: '1'
language:
- iso: eng
publication: AIP Conference Proceedings
publisher: AIP Publishing
quality_controlled: '1'
status: public
title: Development and Modeling of Design and Process Guidelines for FDM Structures
for the Partial Reinforcement of Hybrid Structures
type: conference
user_id: '70729'
volume: 2065
year: '2019'
...
---
_id: '22027'
abstract:
- lang: eng
text: Additive manufacturing processes, like the Fused Deposition Modeling (FDM)
process, do not need product-specific tools and create parts directly from the
CAD data. In the FDM process, the semi-finished product, a wire of a thermoplastic
polymer, is melted and forced through a nozzle. The continuous positioning of
this nozzle allows the polymer to weld together strand by strand and layer by
layer to produce a component. Because no mold is used in the FDM process, no holding
pressure can be generated as in injection molding processes, in which the holding
pressure is used to minimize the shrinkage and warpage of the part. In the FDM
process, the part is generated in an ambient pressure environment. Each strand
cools down and shrinks separately. This causes residual stresses in the part that
can lead to major warpage and a complete stoppage of the process. This is the
main reason why the material selection in the FDM process is restricted in comparison
to conventional polymer processing technologies. In this paper, the warpage of
different polymers is quantified as a criterion for evaluating the processability
of polymers in the FDM process. Due to the process principle, the part properties
in the FDM process are mainly influenced by the machine quality and the data processing,
so that it is difficult to test a material for FDM independently of the machine
and the data processing. Considering these influences, a custom-built specimen
is created to test and quantify the warpage of different types of blended and
reinforced polyamide 6. Considering the experimentally investigated warpage, the
materials can be evaluated and the warpage can be related to the shrinkage investigated
in pvT measurements. This procedure allows the machine- and process-independent
rating of the processability in terms of warpage for different materials. Alongside
other criteria, this is a necessary step to develop new materials with good processability
in the FDM process.
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: C.
full_name: Schumacher, C.
last_name: Schumacher
- first_name: C.
full_name: Fels, C.
last_name: Fels
citation:
ama: 'Schöppner V, Schumacher C, Fels C. A Method to Evaluate the Process-Specific
Warpage for Different Polymers in the FDM Process. In: AIP Conference Proceedings.
AIP Publishing; 2019. doi:10.1063/1.5088315'
apa: Schöppner, V., Schumacher, C., & Fels, C. (2019). A Method to Evaluate
the Process-Specific Warpage for Different Polymers in the FDM Process. AIP
Conference Proceedings. https://doi.org/10.1063/1.5088315
bibtex: '@inproceedings{Schöppner_Schumacher_Fels_2019, title={A Method to Evaluate
the Process-Specific Warpage for Different Polymers in the FDM Process}, DOI={10.1063/1.5088315}, booktitle={AIP
Conference Proceedings}, publisher={AIP Publishing}, author={Schöppner, Volker
and Schumacher, C. and Fels, C.}, year={2019} }'
chicago: Schöppner, Volker, C. Schumacher, and C. Fels. “A Method to Evaluate the
Process-Specific Warpage for Different Polymers in the FDM Process.” In AIP
Conference Proceedings. AIP Publishing, 2019. https://doi.org/10.1063/1.5088315.
ieee: 'V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific
Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.'
mla: Schöppner, Volker, et al. “A Method to Evaluate the Process-Specific Warpage
for Different Polymers in the FDM Process.” AIP Conference Proceedings,
AIP Publishing, 2019, doi:10.1063/1.5088315.
short: 'V. Schöppner, C. Schumacher, C. Fels, in: AIP Conference Proceedings, AIP
Publishing, 2019.'
date_created: 2021-05-07T13:23:07Z
date_updated: 2022-04-25T08:00:04Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.5088315
language:
- iso: eng
publication: AIP Conference Proceedings
publisher: AIP Publishing
quality_controlled: '1'
status: public
title: A Method to Evaluate the Process-Specific Warpage for Different Polymers in
the FDM Process
type: conference
user_id: '70729'
year: '2019'
...
---
_id: '22026'
abstract:
- lang: eng
text: Das Fused Deposition Modeling (FDM) ist ein etabliertes additives Fertigungsverfahren
zur Her-stellung von thermoplastischen Kunststoffbauteilen. In dem vorliegenden
Beitrag sind FDM-Verstärkungsstrukturen aus dem Material Ultem 9085 dynamischen
Langzeituntersuchungen un-terzogen worden. Dabei wurde die innere Struktur der
Probekörper über eine Parametervariation verändert, sodass anschließend die signifikanten
Einflussfaktoren auf die Langzeitfestigkeit un-ter dynamischer Belastung identifiziert
und analysiert werden konnten. Mit dieser Vorgehens-weise sollte gleichzeitig
eine Optimierung der FDM-Verstärkungsstrukturen hinsichtlich der dy-namischen
Langzeiteigenschaften bei Biege- und Druckbelastungen vorgenommen werden. Des
Weiteren sind anhand der Probekörper die auftretenden Bruch- und Rissausbreitungsmechanis-men
analysiert worden. Anhand der ermittelten Wöhlerkurven kann die Lebensdauer unter
dy-namischer Belastung abgeschätzt werden. Außerdem zeigen die Untersuchungen,
dass Fehlstel-len durch eine hohe Strangbreite und Überfüllungen im Bauteil für
Schwachstellen in den FDM-Verstärkungsstrukturen sorgen, an denen Risse bei Druckbelastung
entstanden sind und sich dadurch schneller ausbreiten konnten.
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: André
full_name: Hirsch, André
id: '27599'
last_name: Hirsch
- first_name: S.
full_name: Paulus, S.
last_name: Paulus
citation:
ama: Moritzer E, Hirsch A, Paulus S. Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
Unter Dynamischer Beanspruchung. Springer Vieweg; 2019:185-198. doi:10.1007/978-3-658-27412-2
apa: Moritzer, E., Hirsch, A., & Paulus, S. (2019). Rissausbreitungsmechanismen
in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung (pp. 185–198).
Springer Vieweg. https://doi.org/10.1007/978-3-658-27412-2
bibtex: '@book{Moritzer_Hirsch_Paulus_2019, title={Rissausbreitungsmechanismen in
FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung}, DOI={10.1007/978-3-658-27412-2},
publisher={Springer Vieweg}, author={Moritzer, Elmar and Hirsch, André and Paulus,
S.}, year={2019}, pages={185–198} }'
chicago: Moritzer, Elmar, André Hirsch, and S. Paulus. Rissausbreitungsmechanismen
in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung. Springer Vieweg,
2019. https://doi.org/10.1007/978-3-658-27412-2.
ieee: E. Moritzer, A. Hirsch, and S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
unter dynamischer Beanspruchung. Springer Vieweg, 2019, pp. 185–198.
mla: Moritzer, Elmar, et al. Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
Unter Dynamischer Beanspruchung. Springer Vieweg, 2019, pp. 185–98, doi:10.1007/978-3-658-27412-2.
short: E. Moritzer, A. Hirsch, S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
Unter Dynamischer Beanspruchung, Springer Vieweg, 2019.
date_created: 2021-05-07T13:23:06Z
date_updated: 2022-04-25T07:59:34Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1007/978-3-658-27412-2
language:
- iso: eng
page: 185-198
publication_identifier:
isbn:
- 978-3-658-27411-5
publisher: Springer Vieweg
quality_controlled: '1'
status: public
title: Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer
Beanspruchung
type: book
user_id: '70729'
year: '2019'
...
---
_id: '22041'
abstract:
- lang: eng
text: The Arburg Plastic Freeforming (APF) is an additive manufacturing process
that allows three-dimensional, thermoplastic components to be produced in layer
by layer. The components are generated by depositing fine, molten plastic droplets.
One of the main advantages of the APF process is the open machine control. Thus,
the process parameters can be adapted and optimized for the individual applications.
The optimization is carried out on the basis of a variation of the process parameters
using a statistical design of experiments. Relevant process parameters are the
layer thickness, the form factor, the raster and delta angle as well as the overlap
between the contour and the filling of a layer. In addition, the nozzle and build
chamber temperatures are varied. Using this procedure, the effects of the influencing
parameters on the mechanical properties and the interactions between the influencing
parameters are analyzed and converted into mathematical models. On the basis of
the results and the models, guidelines will be developed to assist the user of
APF technology in the systematic process configuration for their own applications.
The material used is ABS, one of the most frequently used amorphous thermoplastics
in additive manufacturing. The mechanical properties are determined on the basis
of tensile tests and the characteristic values tensile strength, elongation at
break and Young's modulus. The results should show the performance of the APF
technology in regard to the mechanical properties.
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: André
full_name: Hirsch, André
id: '27599'
last_name: Hirsch
- first_name: Felix
full_name: Hecker, Felix
id: '45537'
last_name: Hecker
citation:
ama: 'Moritzer E, Hirsch A, Hecker F. Process Parameter Optimization to Improve
the Mechanical Properties of Arburg Plastic Freeformed Components. In: 30th
Annual International Solid Freeform Fabrication Symposium. Vol 30. ; 2019:705-714.
doi:http://dx.doi.org/10.26153/tsw/17308'
apa: Moritzer, E., Hirsch, A., & Hecker, F. (2019). Process Parameter Optimization
to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.
30th Annual International Solid Freeform Fabrication Symposium, 30,
705–714. http://dx.doi.org/10.26153/tsw/17308
bibtex: '@inproceedings{Moritzer_Hirsch_Hecker_2019, title={Process Parameter Optimization
to Improve the Mechanical Properties of Arburg Plastic Freeformed Components},
volume={30}, DOI={http://dx.doi.org/10.26153/tsw/17308},
booktitle={30th Annual International Solid Freeform Fabrication Symposium}, author={Moritzer,
Elmar and Hirsch, André and Hecker, Felix}, year={2019}, pages={705–714} }'
chicago: Moritzer, Elmar, André Hirsch, and Felix Hecker. “Process Parameter Optimization
to Improve the Mechanical Properties of Arburg Plastic Freeformed Components.”
In 30th Annual International Solid Freeform Fabrication Symposium, 30:705–14,
2019. http://dx.doi.org/10.26153/tsw/17308.
ieee: 'E. Moritzer, A. Hirsch, and F. Hecker, “Process Parameter Optimization to
Improve the Mechanical Properties of Arburg Plastic Freeformed Components,” in
30th Annual International Solid Freeform Fabrication Symposium, 2019, vol.
30, pp. 705–714, doi: http://dx.doi.org/10.26153/tsw/17308.'
mla: Moritzer, Elmar, et al. “Process Parameter Optimization to Improve the Mechanical
Properties of Arburg Plastic Freeformed Components.” 30th Annual International
Solid Freeform Fabrication Symposium, vol. 30, 2019, pp. 705–14, doi:http://dx.doi.org/10.26153/tsw/17308.
short: 'E. Moritzer, A. Hirsch, F. Hecker, in: 30th Annual International Solid Freeform
Fabrication Symposium, 2019, pp. 705–714.'
date_created: 2021-05-07T13:23:23Z
date_updated: 2024-01-15T12:01:40Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: http://dx.doi.org/10.26153/tsw/17308
intvolume: ' 30'
language:
- iso: eng
page: 705-714
publication: 30th Annual International Solid Freeform Fabrication Symposium
status: public
title: Process Parameter Optimization to Improve the Mechanical Properties of Arburg
Plastic Freeformed Components
type: conference
user_id: '45537'
volume: 30
year: '2019'
...
---
_id: '22202'
abstract:
- lang: eng
text: Structural parts for aviation have very high demands on the development and
production process. Therefore, the entire process must be considered in order
to produce high-quality AM metal parts. In this case study, a conventional part
was selected to be optimized for AM. The process presented includes component
selection, design improvement with a novel approach for topology optimization
based on the AMendate algorithm as basis of MSC Apex Generative Design,component
production on a SLM 250 HL and post-processing including heat treatment and surface
smoothing. With the topology optimization a weight reduction of ~60 % could be
realized, whereby the stress distribution is more homogeneous. Furthermore, the
challenges of support optimization and post-processing have to be addressed, in
order to produce competitive parts.
author:
- first_name: Sven Helge
full_name: Klippstein, Sven Helge
id: '71545'
last_name: Klippstein
- first_name: Anne
full_name: Duchting, Anne
last_name: Duchting
- first_name: Thomas
full_name: Reiher, Thomas
last_name: Reiher
- first_name: F.
full_name: Hengsbach, F.
last_name: Hengsbach
- first_name: Dennis
full_name: Menge, Dennis
id: '29240'
last_name: Menge
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Klippstein SH, Duchting A, Reiher T, Hengsbach F, Menge D, Schmid H-J. Devolopment,
Production and post-processing of a topology optimized aircraft bracket . In:
30th Annual International Solid Freeform Fabrication Symposium. Vol 30.
; 2019:1932-1945.'
apa: Klippstein, S. H., Duchting, A., Reiher, T., Hengsbach, F., Menge, D., &
Schmid, H.-J. (2019). Devolopment, Production and post-processing of a topology
optimized aircraft bracket . 30th Annual International Solid Freeform Fabrication
Symposium, 30, 1932–1945.
bibtex: '@inproceedings{Klippstein_Duchting_Reiher_Hengsbach_Menge_Schmid_2019,
title={Devolopment, Production and post-processing of a topology optimized aircraft
bracket }, volume={30}, booktitle={30th Annual International Solid Freeform Fabrication
Symposium}, author={Klippstein, Sven Helge and Duchting, Anne and Reiher, Thomas
and Hengsbach, F. and Menge, Dennis and Schmid, Hans-Joachim}, year={2019}, pages={1932–1945}
}'
chicago: Klippstein, Sven Helge, Anne Duchting, Thomas Reiher, F. Hengsbach, Dennis
Menge, and Hans-Joachim Schmid. “Devolopment, Production and Post-Processing of
a Topology Optimized Aircraft Bracket .” In 30th Annual International Solid
Freeform Fabrication Symposium, 30:1932–45, 2019.
ieee: S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J.
Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft
bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium,
2019, vol. 30, pp. 1932–1945.
mla: Klippstein, Sven Helge, et al. “Devolopment, Production and Post-Processing
of a Topology Optimized Aircraft Bracket .” 30th Annual International Solid
Freeform Fabrication Symposium, vol. 30, 2019, pp. 1932–45.
short: 'S.H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, H.-J. Schmid,
in: 30th Annual International Solid Freeform Fabrication Symposium, 2019, pp.
1932–1945.'
date_created: 2021-05-14T07:46:35Z
date_updated: 2023-03-27T20:06:22Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
intvolume: ' 30'
language:
- iso: eng
main_file_link:
- url: https://repositories.lib.utexas.edu/bitstream/handle/2152/90529/2019-160-Klippstein.pdf?sequence=2
page: 1932-1945
publication: 30th Annual International Solid Freeform Fabrication Symposium
quality_controlled: '1'
status: public
title: 'Devolopment, Production and post-processing of a topology optimized aircraft
bracket '
type: conference
user_id: '71545'
volume: 30
year: '2019'
...
---
_id: '22441'
abstract:
- lang: eng
text: According to ISO / ASTM 52900, additive manufacturing (AM) is defined as "the
process of joining materials to make parts from 3D model data, usually layer upon
layer, as opposed to conventional manufacturing including subtractive manufacturing
technologies and formative manufacturing methodologies” [1]. This results in significant
advantages over conventional manufacturing methodologies, such as the production
of topologically optimized, complex structures, lower material consumption or
shorter product development cycles. In order to be able to use these advantages,
the possibilities and restrictions of the processes must be known. In particular,
selective laser beam melting (SLM), in which a powdery metallic starting material
is melted by means of a laser, requires a sound understanding of the process.
For this purpose, design guidelines have been presented in various scientific
papers. These design guidelines help to design a component in such a way that
it can be manufactured successfully using additive manufacturing. These so-called
“AMsuitable design guidelines” can be found among others at Adam, Kranz and Thomas
[2,3,4,5]. In contrast to established manufacturing processes, the post-processing
of additive components is divided into two steps. First, the AM immanent post
processing, such as the removing of the component from the building platform or
the removing of the remaining powder. These post-processing steps are in the following
referred to “post-processing”. Secondly, the subsequent post-processing steps
to improve the component properties, such as milling and turning or a stress-relief
annealing. These are referred to as “finishing” and form the focus of this paper.
With regard to a successful finishing of additively manufactured components, design
guidelines must be taken into account that consider the finishing inherent restrictions
and possibilities. In the following, these design guidelines are referred to “finishing
suitable”. They can deviate significantly from those of conventionally manufactured
components in the case of additively manufactured components. Although there are
some investigations that deal with the post-processing of additively manufactured
components [6,7], there are hardly any design guidelines that are suitable for
finishing [8]. Therefore, knowledge about the finishing of additively manufactured
components is based on experimental experience rather than on scientific knowledge.
For this reason, design guidelines for a finishing suitable design must be methodically
determined and quantified. These quantified design guidelines can be used for
an automated design check on complex components like topology optimized geometries.
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lammers S, Tominski J, Zimmer D. Guidelines for post processing oriented design
of additive manufactured parts for use in topology optimization. In: II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019. ; 2019:174-185. doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf'
apa: Lammers, S., Tominski, J., & Zimmer, D. (2019). Guidelines for post processing
oriented design of additive manufactured parts for use in topology optimization.
II International Conference on Simulation for Additive Manufacturing Sim-AM
2019 11-13 September, 2019, 174–185. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
bibtex: '@inproceedings{Lammers_Tominski_Zimmer_2019, title={Guidelines for post
processing oriented design of additive manufactured parts for use in topology
optimization}, DOI={http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf},
booktitle={II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019}, author={Lammers, Stefan and Tominski, Johannes
and Zimmer, Detmar}, year={2019}, pages={174–185} }'
chicago: Lammers, Stefan, Johannes Tominski, and Detmar Zimmer. “Guidelines for
Post Processing Oriented Design of Additive Manufactured Parts for Use in Topology
Optimization.” In II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019, 174–85, 2019. http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
ieee: 'S. Lammers, J. Tominski, and D. Zimmer, “Guidelines for post processing oriented
design of additive manufactured parts for use in topology optimization,” in II
International Conference on Simulation for Additive Manufacturing Sim-AM 2019
11-13 September, 2019, 2019, pp. 174–185, doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.'
mla: Lammers, Stefan, et al. “Guidelines for Post Processing Oriented Design of
Additive Manufactured Parts for Use in Topology Optimization.” II International
Conference on Simulation for Additive Manufacturing Sim-AM 2019 11-13 September,
2019, 2019, pp. 174–85, doi:http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf.
short: 'S. Lammers, J. Tominski, D. Zimmer, in: II International Conference on Simulation
for Additive Manufacturing Sim-AM 2019 11-13 September, 2019, 2019, pp. 174–185.'
date_created: 2021-06-15T11:10:15Z
date_updated: 2023-05-04T07:26:59Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://congress.cimne.com/sim-am2019/frontal/doc/EbookSim-AM2019.pdf
language:
- iso: eng
page: 174-185
publication: II International Conference on Simulation for Additive Manufacturing
Sim-AM 2019 11-13 September, 2019
publication_identifier:
isbn:
- 978-84-949194-8-0
quality_controlled: '1'
status: public
title: Guidelines for post processing oriented design of additive manufactured parts
for use in topology optimization
type: conference
user_id: '13835'
year: '2019'
...
---
_id: '22183'
abstract:
- lang: eng
text: Function integration is a key issue for an efficient and economic usage of
Additive Manufacturing. An efficient heat transfer by topology optimized structures
is a rarely considered approach which will be outlined with an exemplary electronic
housing which has been newly designed. A commercial projector unit, whose electrical
components in total produce 38 W, shall be integrated in the closed housing and
passively cooled by natural convection. Topology optimized structures shall be
generated in the inner part of the housing to transfer the heat homogenously from
the projector components to the housing wall while simultaneously minimizing the
mass. At the outside of the housing walls, lattice and rib structures are applied
to increase the effective surface for heat transfer by natural convection and
radiation. Furthermore, the housing geometry is optimized regarding a minimization
of support structures to reduce the post-processing effort. Finally, the housing
shall be built of AlSi10Mg by SLM.
author:
- first_name: Dennis
full_name: Menge, Dennis
id: '29240'
last_name: Menge
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Marcel
full_name: Töws, Marcel
last_name: Töws
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Menge D, Delfs P, Töws M, Schmid H-J. Topology Optimized Heat Transfer Using
the Example of an Electronic Housing. In: 29th Annual International Solid Freeform
Fabrication Symposium. Vol 29. ; 2018:687-697.'
apa: Menge, D., Delfs, P., Töws, M., & Schmid, H.-J. (2018). Topology Optimized
Heat Transfer Using the Example of an Electronic Housing. 29th Annual International
Solid Freeform Fabrication Symposium, 29, 687–697.
bibtex: '@inproceedings{Menge_Delfs_Töws_Schmid_2018, title={Topology Optimized
Heat Transfer Using the Example of an Electronic Housing}, volume={29}, booktitle={29th
Annual International Solid Freeform Fabrication Symposium}, author={Menge, Dennis
and Delfs, Patrick and Töws, Marcel and Schmid, Hans-Joachim}, year={2018}, pages={687–697}
}'
chicago: Menge, Dennis, Patrick Delfs, Marcel Töws, and Hans-Joachim Schmid. “Topology
Optimized Heat Transfer Using the Example of an Electronic Housing.” In 29th
Annual International Solid Freeform Fabrication Symposium, 29:687–97, 2018.
ieee: D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer
Using the Example of an Electronic Housing,” in 29th Annual International Solid
Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
mla: Menge, Dennis, et al. “Topology Optimized Heat Transfer Using the Example of
an Electronic Housing.” 29th Annual International Solid Freeform Fabrication
Symposium, vol. 29, 2018, pp. 687–97.
short: 'D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International
Solid Freeform Fabrication Symposium, 2018, pp. 687–697.'
date_created: 2021-05-14T07:46:13Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
intvolume: ' 29'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: http://utw10945.utweb.utexas.edu/sites/default/files/2018/056%20TopologyOptimizedHeatTransferUsingtheExample.pdf
oa: '1'
page: 687-697
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Topology Optimized Heat Transfer Using the Example of an Electronic Housing
type: conference
user_id: '29240'
volume: 29
year: '2018'
...
---
_id: '22196'
abstract:
- lang: eng
text: The influence of selective laser sintering (SLS) parameters on PA12 part properties
is well known, but research on other materials is rare. One alternative material
is a thermoplastic elastomer (TPE) called PrimePart ST that is more elastic and
shows a distinct SLS processing behavior. It undergoes a three-dimensional temperature
distribution during the SLS process within the TPE part cake. To examine this
further, a temperature measurement system that allows temperature measurements
inside the part cake is applied to TPE in the present work. Position-dependent
temperature histories are directly correlated with the color and mechanical properties
of built parts and are in very good agreement with artificial heat treatment in
a furnace. Furthermore, it is clearly shown that the yellowish discoloration of
parts in different intensities is not only temperature dependent but also influenced
by the residual oxygen content in the process atmosphere. Nevertheless, the discoloration
has no influence on the mechanical part properties.
author:
- first_name: Christina
full_name: Kummert, Christina
last_name: Kummert
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: Kummert C, Josupeit S, Schmid H-J. Thermoplastic Elastomer Part Color as Function
of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.
Journal of Minerals, Metals and Materials Society. 2018;70(3):425-430.
doi:10.1007/s11837-017-2658-2
apa: Kummert, C., Josupeit, S., & Schmid, H.-J. (2018). Thermoplastic Elastomer
Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective
Laser Sinterung. Journal of Minerals, Metals and Materials Society, 70(3),
425–430. https://doi.org/10.1007/s11837-017-2658-2
bibtex: '@article{Kummert_Josupeit_Schmid_2018, title={Thermoplastic Elastomer Part
Color as Function of Temperature Histories and Oxygen Atmosphere During Selective
Laser Sinterung}, volume={70}, DOI={10.1007/s11837-017-2658-2},
number={3}, journal={Journal of Minerals, Metals and Materials Society}, publisher={Springer},
author={Kummert, Christina and Josupeit, Stefan and Schmid, Hans-Joachim}, year={2018},
pages={425–430} }'
chicago: 'Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic
Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere
During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials
Society 70, no. 3 (2018): 425–30. https://doi.org/10.1007/s11837-017-2658-2.'
ieee: C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color
as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser
Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70,
no. 3, pp. 425–430, 2018.
mla: Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function
of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.”
Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer,
2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
short: C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials
Society 70 (2018) 425–430.
date_created: 2021-05-14T07:46:28Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1007/s11837-017-2658-2
intvolume: ' 70'
issue: '3'
language:
- iso: eng
page: 425-430
publication: Journal of Minerals, Metals and Materials Society
publisher: Springer
status: public
title: Thermoplastic Elastomer Part Color as Function of Temperature Histories and
Oxygen Atmosphere During Selective Laser Sinterung
type: journal_article
user_id: '71545'
volume: 70
year: '2018'
...
---
_id: '22430'
author:
- first_name: Stefan
full_name: Urbanek, Stefan
last_name: Urbanek
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Alexander
full_name: Taube, Alexander
last_name: Taube
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: Conference
Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250. ; 2018.'
apa: 'Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,
… Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part
and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250.'
bibtex: '@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018,
title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for
a Permanent Magnet Synchronous Machine}, booktitle={Conference paper, 2018 IEEE
Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250},
author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter
and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar},
year={2018} }'
chicago: 'Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko
Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing
of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous
Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
ieee: 'S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor
Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference
paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
mla: 'Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active
Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250, 2018.'
short: 'S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T.
Lieneke, D. Zimmer, in: Conference Paper, 2018 IEEE Transportation Electrification
Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
date_created: 2021-06-15T11:10:02Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: 'Conference paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250'
status: public
title: Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a
Permanent Magnet Synchronous Machine
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22433'
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
citation:
ama: 'Tominski J, Lammers S. Software-assisted design check of additive manufactured
components. In: 14th PERMAS Users’ Conference. Vol 14. ; 2018. doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted'
apa: Tominski, J., & Lammers, S. (2018). Software-assisted design check of additive
manufactured components. In 14th PERMAS Users’ Conference (Vol. 14). https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
bibtex: '@inproceedings{Tominski_Lammers_2018, title={Software-assisted design check
of additive manufactured components}, volume={14}, DOI={https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted},
booktitle={14th PERMAS Users’ Conference}, author={Tominski, Johannes and Lammers,
Stefan}, year={2018} }'
chicago: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check
of Additive Manufactured Components.” In 14th PERMAS Users’ Conference,
Vol. 14, 2018. https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
ieee: J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured
components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
mla: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of
Additive Manufactured Components.” 14th PERMAS Users’ Conference, vol.
14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
short: 'J. Tominski, S. Lammers, in: 14th PERMAS Users’ Conference, 2018.'
date_created: 2021-06-15T11:10:05Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
intvolume: ' 14'
language:
- iso: eng
publication: 14th PERMAS Users' Conference
publication_identifier:
isbn:
- 978-3-926494-18-4
status: public
title: Software-assisted design check of additive manufactured components
type: conference
user_id: '38077'
volume: 14
year: '2018'
...
---
_id: '22434'
abstract:
- lang: eng
text: This paper reports on the experimental development and the theoretical analysis
of the scanning laser epitaxy (SLE) process that is currently being investigated
and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing
process for deposition of equiaxed, directionally solidified and single-crystal
nickel superalloys onto superalloy substrates through the selective melting and
re-solidification of superalloy powders. The thermal modeling of the system, done
in a commercial CFD software package, simulates a heat source moving over a powder
bed and considers the approximate change in the property values for consolidating
CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the
melting temperature criteria and the resulting plots are presented alongside matching
experimental micrographs obtained through cross-sectional metallography. The influence
of the processing parameters on the microstructural evolution, as evidenced through
observations made from the micrographs, is discussed. This work is sponsored by
the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526.
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Christian
full_name: Wulf, Christian
last_name: Wulf
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design
Check of Additively Manufactured Components. In: 29th Annual International
Solid Freeform Fabrication Symposium. Vol 29. ; 2018. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf'
apa: Tominski, J., Lammers, S., Wulf, C., & Zimmer, D. (2018). Method for a
Software-based Design Check of Additively Manufactured Components. In 29th
Annual International Solid Freeform Fabrication Symposium (Vol. 29). http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
bibtex: '@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based
Design Check of Additively Manufactured Components}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski,
Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018}
}'
chicago: Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer.
“Method for a Software-Based Design Check of Additively Manufactured Components.”
In 29th Annual International Solid Freeform Fabrication Symposium, Vol.
29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
ieee: J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based
Design Check of Additively Manufactured Components,” in 29th Annual International
Solid Freeform Fabrication Symposium, 2018, vol. 29.
mla: Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively
Manufactured Components.” 29th Annual International Solid Freeform Fabrication
Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
short: 'J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International
Solid Freeform Fabrication Symposium, 2018.'
date_created: 2021-06-15T11:10:06Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
intvolume: ' 29'
language:
- iso: eng
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Method for a Software-based Design Check of Additively Manufactured Components
type: conference
user_id: '38077'
volume: 29
year: '2018'
...
---
_id: '22435'
abstract:
- lang: eng
text: In der Industrie entsteht aufgrund des dynamischen Wettbewerbsumfelds ein
zunehmender Drang nach verkürzten Produktentstehungszeiten, hoher Funktionsintegration
und individualisierten Produkten. Mithin erlangen additive Fertigungsverfahren
eine zunehmende industrielle Bedeutung. Das Laser-Strahlschmelzen (LBM) als additives
Verfahren ist hierbei beispielhaft hervorzuheben, da es bereits im Bereich des
Prototypenbaus und der Kleinserienfertigung ein etabliertes Verfahren ist, das
an der Schwelle zum Einsatz in der Serienproduktion steht. Entscheidendes Hemmnis
für den Einsatz der additiven Fertigungsverfahren bildet die fehlende methodische
Ausnutzung der gestalterischen Freiheiten und Randbedingungen durch die vergleichsweise
neuartige Gruppe an Fertigungsverfahren im gesamten Produktentstehungsprozess.
In der Produktentwicklung bildet die Konstruktionsmethodik einen möglichen Ansatz,
um gestalterische Freiheiten und Vorteile additiver Fertigungsverfahren bereits
in frühen Phasen der Entwicklung gezielt zu berücksichtigen. Hierfür werden aufgrund
bestehender und allgemein anerkannter Konstruktionsmethoden (z.B. VDI2221, Pahl/Beitz,
etc.) Anknüpfungspunkte aufgezeigt, die eine Implementierung, speziell des Laser-Strahlschmelzens,
ermöglichen. Besonderes Augenmerk wird in dieser Veröffentlichung auf die beiden
Konstruktionsphasen Konzeption und Gestaltung gelegt. Hierzu werden Ergänzungen
oder Anpassungen der bestehenden Konstruktionsmethoden vorgestellt. In besonderer
Weise wird dabei auf die Einbringung und die Vorteile der additiven Fertigungsverfahren
eingegangen.
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Sonja
full_name: Bücker, Sonja
last_name: Bücker
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Künneke T, Bücker S, Lieneke T, Zimmer D. Ein Beitrag zur Anpassung bestehender
Konstruktionsmethodiken an die additiven Fertigungsverfahren. In: Proceedings
of the 15th Rapid.Tech Conference. Carl Hanser Verlag GmbH & Co. KG; 2018:128-143.
doi:10.3139/9783446458123.008'
apa: Künneke, T., Bücker, S., Lieneke, T., & Zimmer, D. (2018). Ein Beitrag
zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren.
In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser
Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446458123.008
bibtex: '@inproceedings{Künneke_Bücker_Lieneke_Zimmer_2018, title={Ein Beitrag zur
Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren},
DOI={10.3139/9783446458123.008},
booktitle={Proceedings of the 15th Rapid.Tech Conference}, publisher={Carl Hanser
Verlag GmbH & Co. KG}, author={Künneke, Thomas and Bücker, Sonja and Lieneke,
Tobias and Zimmer, Detmar}, year={2018}, pages={128–143} }'
chicago: Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein
Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”
In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag
GmbH & Co. KG, 2018. https://doi.org/10.3139/9783446458123.008.
ieee: T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung
bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in
Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
mla: Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken
an Die Additiven Fertigungsverfahren.” Proceedings of the 15th Rapid.Tech Conference,
Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
short: 'T. Künneke, S. Bücker, T. Lieneke, D. Zimmer, in: Proceedings of the 15th
Rapid.Tech Conference, Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–143.'
date_created: 2021-06-15T11:10:08Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446458123.008
language:
- iso: eng
page: 128-143
publication: Proceedings of the 15th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45812-3
publisher: Carl Hanser Verlag GmbH & Co. KG
status: public
title: Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven
Fertigungsverfahren
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22436'
abstract:
- lang: eng
text: Die Additive Fertigung eröffnet neue Freiheitsgrade in der Produktentwicklung.
Unsicherheiten über die Wirtschaftlichkeit und Leistungsfähigkeit der aus der
Konstruktion ableitbaren Fertigungstechnologieketten sind zu beachten. In diesem
Beitrag wird eine Methode vorgestellt, welche die Anpassung einer bestehenden
Konstruktionsmethode berücksichtigt und eine iterative Bewertung der Konstruktionsentscheidungen
anhand von Technologieketten ermöglicht. Hiermit können die Potenziale der additiven
Fertigungstechnologien zielgerichtet realisiert werden.
author:
- first_name: Alexander
full_name: Jacob, Alexander
last_name: Jacob
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Tobias
full_name: Baumann, Tobias
last_name: Baumann
- first_name: Nicole
full_name: Stricker, Nicole
last_name: Stricker
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Gisela
full_name: Lanza, Gisela
last_name: Lanza
citation:
ama: Jacob A, Künneke T, Lieneke T, et al. Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb.
2018;113(11):742-745. doi:https://doi.org/10.3139/104.112005
apa: Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D.,
& Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für
die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
113(11), 742–745. https://doi.org/10.3139/104.112005
bibtex: '@article{Jacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title={Iterative
Produktentwicklung und Produktionsplanung für die Additive Fertigung}, volume={113},
DOI={https://doi.org/10.3139/104.112005},
number={11}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Carl
Hanser Verlag}, author={Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias
and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela},
year={2018}, pages={742–745} }'
chicago: 'Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole
Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb
113, no. 11 (2018): 742–45. https://doi.org/10.3139/104.112005.'
ieee: A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, pp. 742–745, 2018.
mla: Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
short: A. Jacob, T. Künneke, T. Lieneke, T. Baumann, N. Stricker, D. Zimmer, G.
Lanza, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113 (2018) 742–745.
date_created: 2021-06-15T11:10:09Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://doi.org/10.3139/104.112005
intvolume: ' 113'
issue: '11'
language:
- iso: eng
page: 742-745
publication: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb
publisher: Carl Hanser Verlag
status: public
title: Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung
type: journal_article
user_id: '38077'
volume: 113
year: '2018'
...