@article{63512, abstract = {{The state of the art shows that PBF-LB/M offers great potential for pressure-loaded parts, with significant weight reductions and simultaneous optimization of flow resistance. This study is aimed at applying existing calculation methods for pressure-loaded parts to additively manufactured pipe structures, considering the two materials EN AC-43000 (3.2381, AlSi10Mg) and AISI 316L (1.4404, X2CrNiMo17-12-2). For this purpose, systematic tensile tests are carried out for both materials. In addition, a statistical evaluation is performed to determine the design-relevant strength characteristics with a survival probability Ps of 97.5 % for both materials in the as-built and heat-treated condition. Pipe specimens are manufactured, half of which are heat treated, geometrically measured and then subjected to a burst pressure test to experimentally determine the failure-critical internal pressure. These results are compared with calculated burst pressures. The calculations are based on the application-relevant methods identified in this study, considering the strength values determined for the respective material condition. This comparison is used to assess the suitability of the calculation methods for additively manufactured pipe structures, based on the materials investigated.}}, author = {{Koers, Thorsten and Magyar, Balázs and Bödger, Christian and Tröster, Thomas}}, issn = {{0308-0161}}, journal = {{International Journal of Pressure Vessels and Piping}}, keywords = {{PBF-LB/M, Pipe structures, Strength assessment, Burst pressure test, Geometrical deviations}}, publisher = {{Elsevier BV}}, title = {{{Analytical and experimental determination of the failure-critical pressure of pipe structures manufactured by PBF-LB/M}}}, doi = {{10.1016/j.ijpvp.2026.105753}}, year = {{2026}}, } @inbook{62946, author = {{Giesen, Marie and Pollmeier, Pascal and Ronnebaum, RonnebaumMarie-Theres and Heitzer, Johanna}}, booktitle = {{Sammelband MINT in der Buchreihe Kompetenzzentren für digital gestützte Schul- und Unterrichtsentwicklung}}, keywords = {{Bildung für nachhaltige Entwicklung, BNE, Nachhaltigkeit, MINT}}, title = {{{Bildung für nachhaltige Entwicklung MI(N)T-Denken – Hintergründe und Umsetzungsmöglichkeiten von BNE in MINT-Lehrkräftefortbildungen}}}, year = {{2026}}, } @article{63676, abstract = {{ Purpose The purpose of this paper is to develop new methods of error representation to improve the accuracy and numerical efficiency of a posteriori and goal-oriented adaptive framework of elastoplasticity with Prandtl–Reuss type material laws. Design/methodology/approach To obtain new methods of error representation for a posteriori and goal-oriented error estimators, weak forms of primal and dual problems are investigated starting with the initial boundary value problem (IBVP). Then, we approximate both problems using temporal discretization. Additionally, we introduce a secant form considering the nonlinearity of elasto-plastic constitutive equations, which is approximated by a tangent form. Finally, we obtain numerical primal and dual solutions and their corresponding error approximations of discretized primal and dual problems, allowing to build several goal-oriented a posteriori error estimators on temporal and spatial adaptive refinement by inserting primal solutions, dual solutions and their error approximations as arguments in residuals of both weak forms as well as in the secant form of the bilinear residual. Findings An elasto-plastic material is investigated in a framework of goal-oriented error estimator by using separately several methods of error representation to deal with either temporal or spatial adaptive refinement, as well as with both refinements leading to an effective reduction of computational effort. Specifically, new error representations based on goal-oriented error estimators are presented and obtained from primal and dual residuals, which use only primal solutions or only dual solutions or a combination of primal and dual solutions as arguments. Error representations obtained from primal residuals and evaluated using only primal arguments do not require the formulation of a dual problem. Research limitations/implications The effectiveness of the different proposed methods is illustrated by an example of a perforated sheet for adaptive spatial refinement where new mesh adaptation methods of error representation are compared against existing mesh adaptation methods such as uniform mesh refinement, mesh refinement based on gradient indicators and adjoint-based methods in literature. The framework generates a balanced mesh consisting of fine, medium and coarse elements for accurate results, avoiding a numerically costly simulation with only fine elements. Originality/value All new proposed methods of error representation successfully estimate actual errors during mesh adaptivity. Furthermore, the proposed methods of error representation allow us to obtain significant reduction and equidistribution of spatial error at the end of the mesh adaptivity process. Their application to a framework of goal-oriented error estimation due to time and mesh adaptivity remains an open issue. }}, author = {{Tchomgue Simeu, Arnold and Caylak, Ismail and Ostwald, Richard}}, issn = {{0264-4401}}, journal = {{Engineering Computations}}, pages = {{1--40}}, publisher = {{Emerald}}, title = {{{Error representations for goal-oriented a posteriori error estimation in elasto-plasticity with applications to mesh adaptivity}}}, doi = {{10.1108/ec-12-2023-0975}}, year = {{2026}}, } @article{63784, author = {{Trienens, Dorte and Brüning, Florian and Schöppner, Volker}}, journal = {{kunststoffland NRW report}}, title = {{{Wo Forschung, KI und Praxis aufeinandertreffen}}}, volume = {{03-2025}}, year = {{2026}}, } @article{63827, abstract = {{Light-emitting diodes (LEDs) are becoming increasingly important across various sectors of the lighting industry and are being used more frequently. In the field of symbolic projection, research is increasingly focusing on implementing light modulation using energy-efficient, incoherent LEDs rather than lasers. Since light modulation in micro- and nano-optics is typically achieved through phase modulation, Finite-Difference Time-Domain (FDTD) simulations are employed for analysis. The objective of this article is to investigate different approaches for approximating incoherent monochromatic light sources within FDTD simulations. To this end, two approaches based on dipole sources are considered, as well as a method involving plane waves with modulated wavefronts based on Cosine–Fourier functions and a method based on the superposition of Gaussian beams. These methods are evaluated in terms of their accuracy using a two-dimensional double-slit configuration and are compared against a fully incoherent analytical reference.}}, author = {{Metzner, Dominik and Potthoff, Jens and Zentgraf, Thomas and Förstner, Jens}}, issn = {{2304-6732}}, journal = {{Photonics}}, keywords = {{tet_topic_opticalantenna, tet_topic_numerics, tet_topic_meta}}, number = {{2}}, publisher = {{MDPI AG}}, title = {{{Approximating Incoherent Monochromatic Light Sources in FDTD Simulations}}}, doi = {{10.3390/photonics13020128}}, volume = {{13}}, year = {{2026}}, } @inproceedings{63890, abstract = {{The computation of highly contracted electron repulsion integrals (ERIs) is essential to achieve quantum accuracy in atomistic simulations based on quantum mechanics. Its growing computational demands make energy efficiency a critical concern. Recent studies demonstrate FPGAs’ superior performance and energy efficiency for computing primitive ERIs, but the computation of highly contracted ERIs introduces significant algorithmic complexity and new design challenges for FPGA acceleration.In this work, we present SORCERI, the first streaming overlay acceleration for highly contracted ERI computations on FPGAs. SORCERI introduces a novel streaming Rys computing unit to calculate roots and weights of Rys polynomials on-chip, and a streaming contraction unit for the contraction of primitive ERIs. This shifts the design bottleneck from limited CPU-FPGA communication bandwidth to available FPGA computation resources. To address practical deployment challenges for a large number of quartet classes, we design three streaming overlays, together with an efficient memory transpose optimization, to cover the 21 most commonly used quartet classes in realistic atomistic simulations. To address the new computation constraints, we use flexible calculation stages with a free-running streaming architecture to achieve high DSP utilization and good timing closure.Experiments demonstrate that SORCERI achieves an average 5.96x, 1.99x, and 1.16x better performance per watt than libint on a 64-core AMD EPYC 7713 CPU, libintx on an Nvidia A40 GPU, and SERI, the prior best-performing FPGA design for primitive ERIs. Furthermore, SORCERI reaches a peak throughput of 44.11 GERIS (109 ERIs per second) that is 1.52x, 1.13x, and 1.93x greater than libint, libintx and SERI, respectively. SORCERI will be released soon at https://github.com/SFU-HiAccel/SORCERI.}}, author = {{Stachura, Philip and Wu, Xin and Plessl, Christian and Fang, Zhenman}}, booktitle = {{Proceedings of the 2026 ACM/SIGDA International Symposium on Field Programmable Gate Arrays (FPGA '26)}}, isbn = {{9798400720796}}, keywords = {{electron repulsion integrals, quantum chemistry, atomistic simulation, overlay architecture, fpga acceleration}}, pages = {{224--234}}, publisher = {{Association for Computing Machinery}}, title = {{{SORCERI: Streaming Overlay Acceleration for Highly Contracted Electron Repulsion Integral Computations in Quantum Chemistry}}}, doi = {{10.1145/3748173.3779198}}, year = {{2026}}, } @article{64187, abstract = {{Carbon fiber-reinforced plastics (CFRPs) have become increasingly significant in recent decades due to their remarkable mechanical properties and lightweight nature. This study aims to advance the understanding and simulation of CFRP behavior through the development of a hyperelastic-plastic-damage homogenization method combined with mean-field theory. The material responses of both the fiber and matrix are modeled using strain energy functions that account for damage evolution, while a complete linearization of the homogenization process is derived to ensure the consistent implementation of the Newton–Raphson iteration scheme in large deformation simulations. The innovative aspect of this work lies in the constitutive linearization for the hyperelastic-plastic-damage formulation within a mean-field homogenization framework, providing an efficient Newton algorithm for modeling the nonlinear behavior of CFRP. A failure criterion for the hyperelastic model of fibers is introduced, along with a damage saturation variable in rate form for the matrix, effectively capturing damage evolution. Through discrete formulations for the homogenization, the proposed model’s capability is demonstrated via three numerical examples and validated against experimental investigations, proving its effectiveness and reliability in simulating CFRP damage.}}, author = {{Zhan, Yingjie and Caylak, Ismail and Ostwald, Richard and Mahnken, Rolf and Barth, Enrico and Uhlmann, Eckart}}, issn = {{1081-2865}}, journal = {{Mathematics and Mechanics of Solids}}, publisher = {{SAGE Publications}}, title = {{{A fully implicit mean-field damage formulation with consistent linearization at large deformations}}}, doi = {{10.1177/10812865261420809}}, year = {{2026}}, } @article{51204, abstract = {{Given a real semisimple connected Lie group $G$ and a discrete torsion-free subgroup $\Gamma < G$ we prove a precise connection between growth rates of the group $\Gamma$, polyhedral bounds on the joint spectrum of the ring of invariant differential operators, and the decay of matrix coefficients. In particular, this allows us to completely characterize temperedness of $L^2(\Gamma\backslash G)$ in this general setting.}}, author = {{Lutsko, Christopher and Weich, Tobias and Wolf, Lasse Lennart}}, journal = {{Duke Math. Journal }}, title = {{{Polyhedral bounds on the joint spectrum and temperedness of locally symmetric spaces}}}, volume = {{(to appear)}}, year = {{2026}}, } @article{64678, abstract = {{One of the major topics in the modern automotive industry is reducing emissions and increasing the mileage range. To tackle this challenge, on the one hand, modifying the powertrain system is a possibility, and on the other hand, lightweight design offers various possibilities. Multi-Material Design (MMD) involves designing car bodies that combine different materials that require joining. Given the variety of materials, mechanical joining processes are preferred. Especially the current development of the Giga/Mega-casting process concerning aluminium casting and the subsequent mechanical joining illustrates the challenges of this material group. In car production, aluminium castings are mainly made from aluminium-silicon (AlSi) alloys. Ultimately, the alloy system's insufficient ductility leads to crack initiation during mechanical joining. Cast parts are therefore often used in areas of the car body that are exposed to high-pressure loads. For example, self-piercing riveting (SPR) is used due to its high load-bearing capacity. In this study, improved joinability is demonstrated by influencing the microstructure through tailored solidification rates and a developed heat-treatment chain strategy adapted for hypoeutectic AlSi systems. Data on microstructure, mechanical, and joining properties are used to develop a solidification-joining correlation for the SPR process across a range of Si contents and solidification rates. The purpose is to develop the ability to produce suitable aluminium castings with sufficient joinability, thereby improving versatility.}}, author = {{Neuser, Moritz and Kaimann, Pia Katharina and Stratmann, Ina and Bobbert, Mathias and Klöckner, Johann Moritz Benedikt and Mann, Moritz and Hoyer, Kay-Peter and Meschut, Gerson and Schaper, Mirko}}, journal = {{Journal of Manufacturing Processes}}, keywords = {{Mechanical joining, Aluminium, Self-piercing riveting, Casting, Microstructure, Joinability AlSi-alloys}}, publisher = {{Elsevier}}, title = {{{Solidification-joinability correlation of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR)}}}, doi = {{https://doi.org/10.1016/j.jmapro.2026.02.040}}, volume = {{164}}, year = {{2026}}, } @article{63665, author = {{Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and Troschitz, Juliane and Neubert, Fynn and Hofmann, Martin and Ostwald, Richard and Mathiszik, Christian and Schmale, Hans Christian and Wallmersperger, Thomas and Grundmeier, Guido}}, issn = {{0143-7496}}, journal = {{International Journal of Adhesion and Adhesives}}, publisher = {{Elsevier BV}}, title = {{{Corrosion of adhesively bonded alloys in maritime environments: A review}}}, doi = {{10.1016/j.ijadhadh.2026.104264}}, volume = {{147}}, year = {{2026}}, } @article{64864, abstract = {{Probing novel properties, arising from twisted interfaces, has traditionally relied on the stacking of exfoliated two-dimensional materials and the spontaneous formation of van der Waals bonds. So far, investigations involving intimate covalent or ionic bonds have not been a focus. Yet, we show here that an established technique, involving thermocompressional wafer bonding, works well for creating twisted non-van der Waals interfaces. We have successfully bonded z-cut lithium niobate single crystals to create ferroelectric oxide interfaces with strong polar discontinuities and have mapped the associated emergent interfacial conductivity. In some instances, a dramatic change in microstructure occurs, involving local dipolar switching. A twist-induced collapse in the capability of the system to effec8tively screen interfacial bound charge is implied. Importantly, this only occurs around specific moiré twist angles with sparse coincident lattices and associated short-range aperiodicity. In quasicrystals, aperiodicity is known to induce pseudo-bandgaps and we suspect a similar phenomenon here.}}, author = {{Rogers, Andrew and Holsgrove, Kristina and Schäfer, Nils A. and Koppitz, Boris and McCluskey, Conor J. and Yedama, Shivani and Lynch, Ronan and Sloan, Keelan and Porter, Barry and Sykes, Adam and Catalan Daniels, Alex and Silva, Romualdo S. and Bruno, Flavio Y. and Seddon, Sam D. and Lu, Haidong and Rüsing, Michael and Fink, Christa and Fahler-Muenzer, Philipp and Fearn, Sarah and Heutz, Sandrine E. M. and Hadjimichael, Marios and Ramasse, Quentin M. and Alexe, Marin and Kumar, Amit and McQuaid, Raymond G. P. and Gruverman, Alexei and Sanna, Simone and Eng, Lukas M. and Gregg, J. Marty}}, issn = {{2041-1723}}, journal = {{Nature Communications}}, number = {{1}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Polar discontinuities, emergent conductivity, and critical twist-angle-dependent behaviour at wafer-bonded ferroelectric interfaces}}}, doi = {{10.1038/s41467-026-68553-7}}, volume = {{17}}, year = {{2026}}, } @article{64873, abstract = {{Continuous flow catalysis utilizing gel-bound organocatalysts within a microfluidic reactor represents a compelling strategy in the realm of organic synthesis. In this study, a quinuclidine-based catalytic monomer (QMA) was synthesized to create polymer gel dots through the process of photopolymerization that serve as a support for the catalyst. The resulting gel-bound organocatalysts were assembled within a continuous microfluidic reactor to facilitate the Baylis–Hillman reaction between various aldehydes and acrylonitrile at a temperature of 50 °C. The conversion of the product was assessed using 1H NMR spectroscopy as an offline analytical method over a duration of 8 h. The findings indicated that highly reactive aldehydes achieved conversion rates exceeding 90%, in contrast to their less reactive counterparts. Furthermore, these results were juxtaposed with previously published data derived from alternative synthetic methodologies, revealing that the continuous microfluidic reactions employing integrated organocatalysts within polymer networks exhibited significantly higher conversions with reduced reaction times (8 h) at the same temperature (50 °C). Additionally, the influence of different geometries (round, triangular, and square) of the gel dots on catalytic activity was investigated, with round and square gel dots demonstrating slightly superior performance compared with triangular gel dots, attributed to their increased surface area. Moreover, an extended reaction period of 6 days was conducted using 4-bromobenzaldehyde and acrylonitrile, resulting in a conversion rate exceeding 70%, which remained stable for 5 days before experiencing a slight decline due to product accumulation on the gel dots.}}, author = {{Killi, Naresh and Kumar, Amit and Nebhani, Leena and Obst, Franziska and Richter, Andreas and Reineke Matsudo, Bernhard and Zentgraf, Thomas and Kuckling, Dirk}}, issn = {{2470-1343}}, journal = {{ACS Omega}}, number = {{9}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Integrating an Organocatalyst into a Polymeric Gel Framework for the Continuous Microflow Baylis–Hillman Reaction}}}, doi = {{10.1021/acsomega.5c09476}}, volume = {{11}}, year = {{2026}}, } @article{61523, abstract = {{AbstractMetasurface holography offers a powerful approach for manipulating wavefronts at the nano and micro scale. Extensive research has been conducted to enhance the multiplexing capacity for diverse wavefronts. However, the independence of multiplexed channels is fundamentally restricted in techniques using single‐layer metasurfaces, resulting in unavoidable crosstalk and the need for post‐filtering of the output wavefronts. Here, a universal wavefront multiplexing concept is presented based on non‐injective transformation. By employing joint optimization on two metasurfaces, different channels can be independently designed without any constraints on the output wavefronts. To validate this approach, ultra‐compact orbital angular momentum (OAM) sorters are designed. In these experiments, the output beams from different channels can be independently mapped to 2D positions with high fineness. In another application of wavefront‐multiplexed holography, 10‐channel multiplexing is experimentally achieved with minimal crosstalk and without the need for post‐processing. These results demonstrate the independence between channels enabled by the non‐injective transformation in the method. The precise wavefront control and high multiplexing capacity underscore its potential for scalable wavefront manipulation devices.}}, author = {{Jin, Xiao and Zentgraf, Thomas}}, issn = {{0935-9648}}, journal = {{Advanced Materials}}, publisher = {{Wiley}}, title = {{{Independent Wavefront Multiplexing with Metasurfaces via Non‐Injective Transformation}}}, doi = {{10.1002/adma.202511823}}, volume = {{38}}, year = {{2026}}, } @inbook{62907, author = {{Fröhleke, Christoph and Habig, Sebastian and Fechner, Sabine}}, booktitle = {{Handlungsorientierung in der Ausbildung von Lehrkräften und pädagogischen Fachkräften}}, editor = {{Vogelsang, Christoph and Grotegut, Lea and Bruns, Julia and Riese, Josef and Fechner, Sabine}}, publisher = {{Waxmann}}, title = {{{Erfassung handlungsorientierter Kompetenzen im Chemiepraktikum - Inwiefern kann die Performanz von Lehramtsstudierenden bei Prozessentscheidungen diagnostiziert werden?}}}, year = {{2026}}, } @book{62821, editor = {{Vogelsang, Christoph and Grotegut, Lea and Bruns, Julia and Riese, Josef and Fechner, Sabine}}, publisher = {{Waxmann}}, title = {{{Handlungsorientierung in der Ausbildung von Lehrkräften und pädagogischen Fachkräften}}}, volume = {{2}}, year = {{2026}}, } @inbook{62947, author = {{Grandrath, Rebecca and Cornelius, Soraya and Pollmeier, Pascal and Fechner, Sabine and Bohrmann-Linde, Claudia and Rubner, Isabel}}, booktitle = {{Sammelband MINT in der Buchreihe Kompetenzzentren für digital gestützte Schul- und Unterrichtsentwicklung}}, keywords = {{Bildung für nachhaltige Entwicklung, BNE, Nachhaltigkeit, Digitalisierung, Digital, KI, Künstliche Intelligenz, Chemie, Chemieunterricht}}, title = {{{Beiträge des ComeNet Chemie zur digitalen Transformation des Chemieunterrichts}}}, year = {{2026}}, } @inproceedings{62885, author = {{Osnabrügge, Malin and Tenberge, Claudia and Fechner, Sabine}}, keywords = {{Artificial intelligence, primary education, science and technology education}}, location = {{Norrköping, Sweden}}, title = {{{Artificial Intelligence in primary science and technology education with a focus on implementation of AI in learning context – Results of a Scoping Review}}}, year = {{2026}}, } @article{63531, author = {{Doshi, Siddharth and Güsken, Nicholas Alexander and Dijk, Gerwin and Carlström, Johan and Ortiz-Cárdenas, Jennifer E. and Suzuki, Peter and Li, Bohan and Fordyce, Polly M. and Salleo, Alberto and Melosh, Nicholas A. and Brongersma, Mark L.}}, issn = {{0028-0836}}, journal = {{Nature}}, number = {{8096}}, pages = {{345--352}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Soft photonic skins with dynamic texture and colour control}}}, doi = {{10.1038/s41586-025-09948-2}}, volume = {{649}}, year = {{2026}}, } @article{63532, abstract = {{Room-temperature lasing is a key milestone in the development of miniaturized optoelectronic and photonic devices. We present a simple approach to synthesize phase-pure quasi-2D layered tin perovskite nanowires with varying quantum well thicknesses (n = 1 to 4). By incorporating a new organic spacer capable of forming a hydrogen-bonded organic framework, this method promoted anisotropic crystal growth and enhanced lattice rigidity. Furthermore, introducing molecular intercalants enabled controlled crystallization into well-defined nanowires that function as Fabry–Pérot cavities. Cavities made from n = 2 to 4 perovskites support efficient and robust near-infrared, room-temperature optically pumped lasing with the threshold as low as 75.8 μJ/cm2, cavity quality factor over 3000, and negligible degradation over 106 pulses. A cleaved coupled nanolaser was fabricated as a proof-of-concept device for photonic applications.}}, author = {{Kim, Jeong Hui and Simon, Jeffrey and Shao, Wenhao and Nian, Zhichen and Yang, Hanjun and Chen, Peigang and Triplett, Brandon and Li, Zhixu and Wu, Pengfei and Chen, Yuheng and Farheen, Henna and Pagadala, Karthik and Choi, Kyu Ri and Fruhling, Colton B. and Förstner, Jens and Boltasseva, Alexandra and Savoie, Brett M. and Shalaev, Vladimir M. and Dou, Letian}}, issn = {{0002-7863}}, journal = {{Journal of the American Chemical Society}}, keywords = {{tet_topic_opticalantenna}}, pages = {{jacs.5c14431}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Hydrogen-Bonded Organic Framework Enables Phase-Pure Layered Tin Perovskite Nanowires for Room-Temperature Lasing}}}, doi = {{10.1021/jacs.5c14431}}, year = {{2026}}, } @article{64877, author = {{Taheri, Behnood and Kopylov, Denis and Hammer, Manfred and Meier, Torsten and Förstner, Jens and Sharapova, Polina R.}}, journal = {{arXiv}}, title = {{{Gain-induced spectral non-degeneracy in type-II parametric down-conversion}}}, doi = {{10.48550/ARXIV.2603.01656}}, year = {{2026}}, }