@misc{46861,
  author       = {{Sajadi, Said}},
  title        = {{{Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess}}},
  year         = {{2023}},
}

@article{47117,
  abstract     = {{Trotz der Annahme, dass Langzeitpraktika im Lehramts-studium hohe Belastungen für Studierende darstellen können, sind empirische Analysen zum Einfluss sozialer (z.B. die Betreuung eigener Kinder, Pflegeaufgaben) und organisationaler Bedingungsfaktoren (z.B. Erwerbstätigkeit, Fahrzeiten zur Praktikumsschule, Zusatzkosten) rar. Daher wurden in diesem Beitrag im Rahmen einer Sekundäranalyse evaluativer Daten Zusammenhänge zwischen dem Belastungserleben von N = 611 Lehramtsstudierenden im Praxissemester an der Universität Paderborn und verschiedenen Bedingungsfaktoren untersucht. Das Belastungserleben wurde vor und nach dem Praxissemester mit Hilfe des Maslach-Burnout-Inventars (MBI-SS) erfasst. Regressionsanalysen ergaben, dass soziale und organisationale Bedingungsfaktoren kaum Unterschiede im Belastungserleben aufklären. Als einzige bedeutende Faktoren mit kleinen Effekten erwiesen sich die Fahrzeit zur Praktikumsschule und die Höhe evtl. zusätzlicher Materialkosten. Auch durch Clusteranalysen ermittelte Gruppen von hochbelasteten Studierenden zeichnen sich nicht durch spezifische soziale oder organisationale Bedingungsfaktoren aus.}},
  author       = {{Vogelsang, Christoph and Brandhorst, André}},
  journal      = {{Herausforderung Lehrer* Innenbildung-Zeitschrift Zur Konzeption, Gestaltung Und Diskussion}},
  keywords     = {{Praxissemester, Belastung, Burnout, Lehramtsstudium, soziale Situation}},
  number       = {{1}},
  title        = {{{Schulpraktikum zwischen Kind und Nebenjob? Einfluss von sozialen und organisationalen Bedingungsfaktoren auf das Belastungserleben Lehramtsstudierender im Praxissemester}}},
  doi          = {{10.11576/HLZ-5818}},
  volume       = {{6}},
  year         = {{2023}},
}

@article{47423,
  author       = {{Methfessel, Annette and Janzen, Thomas}},
  journal      = {{Englisch betrifft uns}},
  number       = {{2}},
  title        = {{{Living the Dream? Relating to the living conditions of Hispanic migrants in California through the short story Inside Out}}},
  year         = {{2023}},
}

@inproceedings{56626,
  author       = {{Holzmüller, Maik and Gong, Yi and Bader, Fabian and Henke, Armin and Homberg, Werner}},
  booktitle    = {{Lecture Notes in Mechanical Engineering}},
  isbn         = {{9783031410222}},
  issn         = {{2195-4356}},
  publisher    = {{Springer Nature Switzerland}},
  title        = {{{Numerical Approach to Model a Novel Electrohydraulic Incremental Forming Process for the Manufacture of Pillow Plate Heat Exchangers}}},
  doi          = {{10.1007/978-3-031-41023-9_69}},
  year         = {{2023}},
}

@article{35831,
  abstract     = {{Videografien eigenen Unterrichts sind ein mögliches methodisches Werkzeug zur Förderung der professionellen Kompetenz angehender Lehrkräfte, das allerdings innerhalb der Lehramtsausbildung noch nicht breit implementiert
ist. Ein möglicher Grund hierfür könnte neben organisatorischen Herausforderungen auch in einer geringen Akzeptanz von Eigenvideografien durch Lehramtsstudierende liegen. Um besser abschätzen zu können, mit welchen Voraussetzungen affektiv-emotionaler Art bei einer breiteren Implementierung im Lehramtsstudium gerechnet werden kann, wurden N = 938 Lehramtsstudierende im Masterstudium an der Universität Paderborn zu ihren Emotionen und Bereitschaften zur Arbeit mit Eigenvideografien befragt. Dabei wurde auch erfasst, wie sich diese je nach bestehenden
Erfahrungen zur Arbeit mit Videografien unterscheiden. In den Ergebnissen zeigen sich kaum affektiv-emotionale Reaktionen zur Eigenvideografie, und wenn, vor allem Gefühle der Unsicherheit. Zu beachten ist, dass zwar bei gut der Hälfte der Studierenden eine eher hohe generelle Bereitschaft zur Eigenvideografie besteht, eine konkrete Intention bzw. eine konkrete Volition zur Videografie aber geringer ist. Die ca. 10 % der Studierenden mit Eigenvideografieerfahrung im Studium zeigen erwartungsgemäß höhere Bereitschaften, aber unerwartet keine signifikant positiveren Emotionen. Insgesamt verdeutlichen die Ergebnisse, dass bzgl. der Akzeptanz der Studierenden ein höheres Potenzial zur Implementation von Eigenvideografien im Studium vorliegt, als aktuell ausgeschöpft wird.}},
  author       = {{Vogelsang, Christoph and Pollmeier, Pascal and Gockeln, Theresa and Rogge, Tim}},
  journal      = {{Zeitschrift für Bildungsforschung}},
  keywords     = {{Lehrerbildung, Videografie, Praxissemester, Emotionen, Akzeptanz}},
  pages        = {{7--31}},
  publisher    = {{Springer}},
  title        = {{{Zu unangenehm, zu viel Aufwand oder keine Möglichkeit? – Emotionen und Bereitschaft von Lehramtsstudierenden zur Videografie eigenen Unterrichts}}},
  doi          = {{10.1007/s35834-022-00378-y}},
  volume       = {{13}},
  year         = {{2023}},
}

@article{46494,
  abstract     = {{To improve the mechanical performance and to address current shortcomings of adhesive bonds such as bond degradation due to aging, a pulsed laser surface pretreatment of the metal surfaces of aluminum AW 6082-T6 joints with epoxy adhesive E320 is investigated. The surface treatment of the specimens resulted in increased single-lap shear (SLS) strengths before and after hydrothermal aging in 80°C hot water compared to nonpretreated reference specimens. In order to reveal the correlations of laser parameters, resulting surface morphologies and the SLS strength, differently laser pretreated surfaces were characterized at the micro- and nanoscale using optical and scanning electron microscopies. The surface enlargement was quantified with a digital image analysis of cross-sections prepared from the joint interfaces. An analysis of variances (ANOVA) of the SLS results indicated that the laser parameters power and pulse frequency were most critical for obtaining high SLS strengths. Pretreated joint surfaces with a high micro- and nano-surface enlargement and deep solidification structures provide high SLS strengths of up to 50 MPa and almost negligible aging losses of merely 4%. Undercut structures on the pretreated surfaces were found to be beneficial for the mechanical and aging properties when only limited micro- and nanostructuring was applied.}},
  author       = {{Freund, Jonathan and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang and Tröster, Thomas and Haubrich, Jan}},
  issn         = {{0021-8464}},
  journal      = {{The Journal of Adhesion}},
  keywords     = {{Materials Chemistry, Surfaces, Coatings and Films, Surfaces and Interfaces, Mechanics of Materials, General Chemistry}},
  pages        = {{1--31}},
  publisher    = {{Informa UK Limited}},
  title        = {{{Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints}}},
  doi          = {{10.1080/00218464.2023.2223475}},
  year         = {{2023}},
}

@article{55760,
  abstract     = {{The transferability of structure–property relationships for laser-pretreated metal adhesive joints to laser-pretreated metal–carbon-fiber-reinforced plastic (CFRP) bonds was investigated. Single-lap shear tests were performed on hybrid AW 6082-T6–CFRP specimens pretreated with the same pulsed laser surface parameter sets on the metal surface as previously tested, AW 6082-T6–E320 metal adhesive joints. The fracture surfaces were characterized to determine the type of failure and elucidate differences and commonalities in the link between surface structures and single-lap shear strengths. Digital image analyses of the hybrid specimens’ fractured surfaces were used to quantify remaining CFRP fragments on the metallic joint side. The results indicate that high surface enlargements and the presence of undercut structures lead to single-lap shear strengths exceeding 40 MPa and 35 MPa for unaged and aged hybrid specimens, respectively. Whereas for the metal–polymer joints, the trend from high strength to weakly bonded specimens is largely continuous with the degree of surface structuring, hybrid metal–CFRP joints exhibit a drastic drop in joint performance after aging if the laser-generated surface structures are less pronounced with low surface enlargements and crater depths. Surface features and hydrothermal aging determine whether the specimens fail cohesively or adhesively.</jats:p>}},
  author       = {{Freund, Jonathan and Lützenkirchen, Isabel and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang and Tröster, Thomas and Haubrich, Jan}},
  issn         = {{2504-477X}},
  journal      = {{Journal of Composites Science}},
  number       = {{10}},
  publisher    = {{MDPI AG}},
  title        = {{{Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints}}},
  doi          = {{10.3390/jcs7100427}},
  volume       = {{7}},
  year         = {{2023}},
}

@article{46495,
  abstract     = {{A parameter investigation for manufacturing a hybrid system through the prepreg pressing process was carried out within the scope of this work to achieve optimal adhesion properties. The hybrid specimen comprises an aluminium sheet of alloy EN AW 6082 in T6 condition and a thermoset Carbon Fibre Reinforced Plastics prepreg. The prepreg pressing process allows the curing reaction of epoxy resin and the joining process to occur simultaneously to avoid an additional bonding process step. The surface of the aluminium sheet was pretreated in advance using a pulsed Nd:YAG laser to enhance the bonding properties. In the first step, the shear edge tests investigated the adhesion properties achieved with different consolidation (temperature, time and pressure) and laser parameters. Then, 3-point bending tests were carried out to investigate the influence of the consolidation parameters on the mechanical properties of the Carbon Fibre Reinforced Plastics-laminate. In this way, the optimal parameter sets for manufacturing hybrid structures were determined.}},
  author       = {{Wu, Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich, Jan and Löbbecke, Miriam and Tröster, Thomas}},
  issn         = {{0021-8464}},
  journal      = {{The Journal of Adhesion}},
  keywords     = {{Materials Chemistry, Surfaces, Coatings and Films, Surfaces and Interfaces, Mechanics of Materials, General Chemistry}},
  pages        = {{1--29}},
  publisher    = {{Informa UK Limited}},
  title        = {{{Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process}}},
  doi          = {{10.1080/00218464.2023.2245758}},
  year         = {{2023}},
}

@inproceedings{48597,
  abstract     = {{This paper introduces an intrinsic manufacturing process of a hat profile made of laser-pretreated aluminium sheet of alloy EN AW-6082 in T6 condition and carbon fibre-reinforced plastic (CFRP) prepreg. The resin system used in combination with CFRP was epoxy resin (EP). Before manufacturing, the laser-pretreated aluminium sheet and CFRP prepreg were stacked to form a multi-layer composite, which was pressed simultaneously in one process step. The optimal CFRP layer structure was calculated in advance using the finite element method. During the forming process, the curing reaction and the joining of the aluminium sheet and CFRP prepreg will take place simultaneously. Thus, further joining techniques such as bonding and riveting could be saved, and a much more efficient process could be achieved. After manufacturing, shear-edge test was used to characterize the adhesion properties of the hybrid part.}},
  author       = {{Wu, Shuang and Freund, Jonathan and Delp, Alexander and Haubrich, Jan and Löbbecke, Miriam and Walther, Frank and Tröster, Thomas}},
  title        = {{{Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg}}},
  year         = {{2023}},
}

@inproceedings{49436,
  author       = {{Kaiser, Maximilian Alexander and Reitz, Alexander and Konrad, Stefan and Meyer, Thomas and Marten, Thorsten and Tröster, Thomas}},
  booktitle    = {{Workshop Warmblechumformung}},
  editor       = {{Merklein, Marion}},
  isbn         = {{978-3-00-077160-6}},
  keywords     = {{Presshärten, resistive Schnellerwärmung, Energieeffizienz}},
  location     = {{Fürth}},
  pages        = {{99--118}},
  publisher    = {{Lehrstuhl für Fertigungstechnologie}},
  title        = {{{Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess}}},
  volume       = {{18}},
  year         = {{2023}},
}

@inbook{47543,
  author       = {{Zentgraf, Thomas and Sain, Basudeb and Zhang, Shuang}},
  booktitle    = {{Fundamentals and Applications of Nonlinear Nanophotonics}},
  editor       = {{Panoiu, Nicoae C.}},
  isbn         = {{978-0-323-90614-2}},
  publisher    = {{Elsevier}},
  title        = {{{Symmetry governed nonlinear selection rules in nanophotonics }}},
  doi          = {{10.1016/B978-0-323-90614-2.00011-0}},
  year         = {{2023}},
}

@inproceedings{43051,
  abstract     = {{We demonstrate the numerical and experimental realization of optimized optical traveling-wave antennas made of low-loss dielectric materials. These antennas exhibit highly directive radiation patterns and our studies reveal that this nature comes from two dominant guided TE modes excited in the waveguide-like director of the antenna, in addition to the leaky modes. The optimized antennas possess a broadband nature and have a nearunity radiation efficiency at an operational wavelength of 780 nm. Compared to the previously studied plasmonic antennas for photon emission, our all-dielectric approach demonstrates a new class of highly directional, low-loss, and broadband optical antennas.}},
  author       = {{Farheen, Henna and Yan, Lok-Yee and Leuteritz, Till and Qiao, Siqi and Spreyer, Florian and Schlickriede, Christian and Quiring, Viktor and Eigner, Christof and Silberhorn, Christine and Zentgraf, Thomas and Linden, Stefan and Myroshnychenko, Viktor and Förstner, Jens}},
  booktitle    = {{Integrated Optics: Devices, Materials, and Technologies XXVII}},
  editor       = {{García-Blanco, Sonia M. and Cheben, Pavel}},
  keywords     = {{tet_topic_opticalantenna}},
  pages        = {{124241E}},
  publisher    = {{SPIE}},
  title        = {{{Tailoring the directive nature of optical waveguide antennas}}},
  doi          = {{10.1117/12.2658921}},
  year         = {{2023}},
}

@article{40513,
  abstract     = {{Geometric-phase dielectric meta-lenses made of silicon with high numerical aperture and short focal lengths are fabricated and characterised. For circularly polarised light, the same meta-lens can act as a converging or diverging lens, depending on the handedness of the circular polarisation. This effect enables application for optical tweezers that trap or release µm-size polymer beads floating in a microfluidic channel on demand. An electrically addressable polarisation converter based on liquid crystals may be used to switch between the two states of polarisation, at which the light transmitted through the meta-lens is focused (trapping) or defocussed (releasing), respectively.}},
  author       = {{Geromel, René and Rennerich, Roman and Zentgraf, Thomas and Kitzerow, Heinz-Siegfried}},
  journal      = {{Liquid Crystals}},
  number       = {{7-10}},
  pages        = {{1193--1203}},
  publisher    = {{Taylor & Francis}},
  title        = {{{Geometric-phase metalens to be used for tunable optical tweezers in microfluidics}}},
  doi          = {{10.1080/02678292.2023.2171146}},
  volume       = {{50}},
  year         = {{2023}},
}

@inbook{48642,
  author       = {{Akbulut Irmak, Emine Fulya and Hanses, Hendrik and Horwath, Ilona and Tröster, Thomas}},
  booktitle    = {{Climate Protection, Resource Efficiency, and Sustainable Engineering}},
  editor       = {{Horwath, Ilona and Schweizer, Swetlana}},
  isbn         = {{9783837663778}},
  issn         = {{2703-1543}},
  publisher    = {{transcript Verlag}},
  title        = {{{Case Study III: Challenges of lightweight design, vehicles, and rescuers}}},
  doi          = {{10.14361/9783839463772-006}},
  year         = {{2023}},
}

@article{47536,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Efforts to enhance sustainability in all areas of life are increasing worldwide. In the field of manufacturing technology, a wide variety of approaches are being used to improve both resource and energy efficiency. Efficiency as well as sustainability can be improved by creating a circular economy or through energy-efficient recycling processes. As part of the interdisciplinary research group "Light—Efficient—Mobile" investigations on the energy-efficient friction-induced recycling process have been carried out at the department of Forming and Machining Technology at Paderborn University. E.g. using the friction-induced recycling process, different formless solid aluminum materials can be direct recycled into semi-finished products in an energy-efficient manner. The results of investigations with regard to the influence of the geometrical shape and filling rate of the aluminum particles to be recycled as well as the rotational speed of the continuously rotating wheel are explained in this paper. In addition to the recycling of aluminum chips, aluminum particles like powders from the field of additive manufacturing are processed. Based on these results, the future potentials of solid-state recycling processes and their contribution to the circular economy are discussed. The main focus here is on future interdisciplinary research projects to achieve circularity in the manufacturing of user-individual semi-finished products as well as the possibility to selectively adjust the product properties with the continuous recycling process.</jats:p>}},
  author       = {{Borgert, Thomas and Milaege, Dennis and Schweizer, Swetlana and Homberg, Werner and Schaper, Mirko and Tröster, Thomas}},
  issn         = {{1960-6206}},
  journal      = {{International Journal of Material Forming}},
  keywords     = {{General Materials Science}},
  number       = {{6}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology}}},
  doi          = {{10.1007/s12289-023-01785-w}},
  volume       = {{16}},
  year         = {{2023}},
}

@article{46486,
  author       = {{Pfeifer, Florian and Knorr, Lukas and Schlosser, Florian and Marten, Thorsten and Tröster, Thomas}},
  issn         = {{1848-9257}},
  journal      = {{Journal of Sustainable Development of Energy, Water and Environment Systems}},
  keywords     = {{Energy Engineering and Power Technology, Water Science and Technology, Environmental Science (miscellaneous), Renewable Energy, Sustainability and the Environment}},
  number       = {{3}},
  pages        = {{1--20}},
  publisher    = {{SDEWES Centre}},
  title        = {{{Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes}}},
  doi          = {{10.13044/j.sdewes.d11.0450}},
  volume       = {{11}},
  year         = {{2023}},
}

@inbook{34165,
  author       = {{Hanses, Hendrik and Akbulut Irmak, Emine Fulya and Horwath, Ilona and Tröster, Thomas}},
  booktitle    = {{ Climate Protection, Resource Efficiency, and Sustainable Engineering. Transdisciplinary Approaches to Design and Manufacturing Technology}},
  editor       = {{Horwath, Ilona and Schweizer, Swetlana}},
  isbn         = {{978-3-8376-6377-8}},
  publisher    = {{transcript Verlag}},
  title        = {{{Challenges of lightweight design, vehicles, and rescuers}}},
  year         = {{2023}},
}

@article{55900,
  author       = {{Scharwald, Dennis and Meier, Torsten and Sharapova, Polina}},
  issn         = {{2643-1564}},
  journal      = {{Physical Review Research}},
  number       = {{4}},
  publisher    = {{American Physical Society (APS)}},
  title        = {{{Phase sensitivity of spatially broadband high-gain SU(1,1) interferometers}}},
  doi          = {{10.1103/physrevresearch.5.043158}},
  volume       = {{5}},
  year         = {{2023}},
}

@inproceedings{60905,
  author       = {{Ostermann, Moritz and Dierkes, Eric and Marten, Thorsten and Tröster, Thomas}},
  booktitle    = {{Proceedings of the 18th Conference on Sustainable Development of Energy, Water and Environmental Systems, Dubrovnik, Croatia 2023}},
  location     = {{Dubrovnik, Croatia}},
  title        = {{{Life Cycle Assessment of Lightweight Structures in Vehicles for New Mobility Concepts}}},
  year         = {{2023}},
}

@article{31059,
  abstract     = {{In this article we prove meromorphic continuation of weighted zeta functions in the framework of open hyperbolic systems by using the meromorphically continued restricted resolvent of Dyatlov and Guillarmou (2016). We obtain a residue formula proving equality between residues of weighted zetas and invariant Ruelle distributions. We combine this equality with results of Guillarmou, Hilgert and Weich (2021) in order to relate the residues to Patterson-Sullivan distributions. Finally we provide proof-of-principle results concerning the numerical calculation of invariant Ruelle distributions for 3-disc scattering systems.}},
  author       = {{Schütte, Philipp and Weich, Tobias and Barkhofen, Sonja}},
  journal      = {{Communications in Mathematical Physics}},
  pages        = {{655--678}},
  title        = {{{Meromorphic Continuation of Weighted Zeta Functions on Open Hyperbolic Systems}}},
  doi          = {{https://doi.org/10.1007/s00220-022-04538-z}},
  volume       = {{398}},
  year         = {{2023}},
}