---
_id: '60851'
author:
- first_name: Koustav
full_name: Ghosh, Koustav
last_name: Ghosh
- first_name: Dennis
full_name: Milaege, Dennis
id: '35461'
last_name: Milaege
- first_name: Paul
full_name: Steinmeier, Paul
id: '69776'
last_name: Steinmeier
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
citation:
ama: Ghosh K, Milaege D, Steinmeier P, Schaper M, Hoyer K-P, Pramanik S. Effect
of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures. Journal of
Materials Engineering and Performance. Published online 2025. doi:10.1007/s11665-025-11669-6
apa: Ghosh, K., Milaege, D., Steinmeier, P., Schaper, M., Hoyer, K.-P., & Pramanik,
S. (2025). Effect of Strain Rate on the Deformation Behavior and Energy Absorption
Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures.
Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-025-11669-6
bibtex: '@article{Ghosh_Milaege_Steinmeier_Schaper_Hoyer_Pramanik_2025, title={Effect
of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures}, DOI={10.1007/s11665-025-11669-6},
journal={Journal of Materials Engineering and Performance}, publisher={Springer
Science and Business Media LLC}, author={Ghosh, Koustav and Milaege, Dennis and
Steinmeier, Paul and Schaper, Mirko and Hoyer, Kay-Peter and Pramanik, Sudipta},
year={2025} }'
chicago: Ghosh, Koustav, Dennis Milaege, Paul Steinmeier, Mirko Schaper, Kay-Peter
Hoyer, and Sudipta Pramanik. “Effect of Strain Rate on the Deformation Behavior
and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured
Lattice Structures.” Journal of Materials Engineering and Performance,
2025. https://doi.org/10.1007/s11665-025-11669-6.
ieee: 'K. Ghosh, D. Milaege, P. Steinmeier, M. Schaper, K.-P. Hoyer, and S. Pramanik,
“Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures,” Journal of
Materials Engineering and Performance, 2025, doi: 10.1007/s11665-025-11669-6.'
mla: Ghosh, Koustav, et al. “Effect of Strain Rate on the Deformation Behavior and
Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured
Lattice Structures.” Journal of Materials Engineering and Performance,
Springer Science and Business Media LLC, 2025, doi:10.1007/s11665-025-11669-6.
short: K. Ghosh, D. Milaege, P. Steinmeier, M. Schaper, K.-P. Hoyer, S. Pramanik,
Journal of Materials Engineering and Performance (2025).
date_created: 2025-07-31T12:30:19Z
date_updated: 2025-07-31T12:36:41Z
department:
- _id: '9'
- _id: '158'
- _id: '321'
doi: 10.1007/s11665-025-11669-6
language:
- iso: eng
publication: Journal of Materials Engineering and Performance
publication_identifier:
issn:
- 1059-9495
- 1544-1024
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures
type: journal_article
user_id: '48411'
year: '2025'
...
---
_id: '60853'
alternative_title:
- Genderkompetenz im Profilstudium Umgang mit Heterogenität an der Universität Paderborn
author:
- first_name: Claudia
full_name: Decker, Claudia
id: '31046'
last_name: Decker
- first_name: Aiko Julia
full_name: Möhwald, Aiko Julia
id: '89496'
last_name: Möhwald
- first_name: Vera
full_name: Uppenkamp, Vera
last_name: Uppenkamp
- first_name: Petra
full_name: Westphal, Petra
id: '42377'
last_name: Westphal
citation:
ama: 'Decker C, Möhwald AJ, Uppenkamp V, Westphal P. Gendersensible Bildung als
Querschnittsaufgabe im Lehramtsstudium. In: Beiträge zur Schulentwicklung.
wbv Publikation; 2025. doi:10.3278/i77789w017'
apa: Decker, C., Möhwald, A. J., Uppenkamp, V., & Westphal, P. (2025). Gendersensible
Bildung als Querschnittsaufgabe im Lehramtsstudium. In Beiträge zur Schulentwicklung.
wbv Publikation. https://doi.org/10.3278/i77789w017
bibtex: '@inbook{Decker_Möhwald_Uppenkamp_Westphal_2025, place={Bielefeld}, title={Gendersensible
Bildung als Querschnittsaufgabe im Lehramtsstudium}, DOI={10.3278/i77789w017},
booktitle={Beiträge zur Schulentwicklung}, publisher={wbv Publikation}, author={Decker,
Claudia and Möhwald, Aiko Julia and Uppenkamp, Vera and Westphal, Petra}, year={2025}
}'
chicago: 'Decker, Claudia, Aiko Julia Möhwald, Vera Uppenkamp, and Petra Westphal.
“Gendersensible Bildung als Querschnittsaufgabe im Lehramtsstudium.” In Beiträge
zur Schulentwicklung. Bielefeld: wbv Publikation, 2025. https://doi.org/10.3278/i77789w017.'
ieee: 'C. Decker, A. J. Möhwald, V. Uppenkamp, and P. Westphal, “Gendersensible
Bildung als Querschnittsaufgabe im Lehramtsstudium,” in Beiträge zur Schulentwicklung,
Bielefeld: wbv Publikation, 2025.'
mla: Decker, Claudia, et al. “Gendersensible Bildung als Querschnittsaufgabe im
Lehramtsstudium.” Beiträge zur Schulentwicklung, wbv Publikation, 2025,
doi:10.3278/i77789w017.
short: 'C. Decker, A.J. Möhwald, V. Uppenkamp, P. Westphal, in: Beiträge zur Schulentwicklung,
wbv Publikation, Bielefeld, 2025.'
date_created: 2025-08-01T08:58:18Z
date_updated: 2025-08-01T08:58:54Z
department:
- _id: '33'
doi: 10.3278/i77789w017
language:
- iso: ger
place: Bielefeld
publication: Beiträge zur Schulentwicklung
publication_identifier:
isbn:
- '9783763977789'
publication_status: published
publisher: wbv Publikation
status: public
title: Gendersensible Bildung als Querschnittsaufgabe im Lehramtsstudium
type: book_chapter
user_id: '31046'
year: '2025'
...
---
_id: '60896'
author:
- first_name: Claudia
full_name: Decker, Claudia
id: '31046'
last_name: Decker
- first_name: Carolin
full_name: Waltert, Carolin
id: '676'
last_name: Waltert
- first_name: Miriam
full_name: Kehne, Miriam
id: '129'
last_name: Kehne
- first_name: Nicole
full_name: Satzinger, Nicole
id: '16119'
last_name: Satzinger
- first_name: Anne
full_name: Strotmeyer, Anne
id: '58723'
last_name: Strotmeyer
orcid: 0000-0002-6830-9245
- first_name: Antje
full_name: Tarampouskas, Antje
last_name: Tarampouskas
- first_name: Maximilian
full_name: Vlachos, Maximilian
last_name: Vlachos
- first_name: Lena
full_name: Wobbe, Lena
last_name: Wobbe
citation:
ama: 'Decker C, Waltert C, Kehne M, et al. Das Profilstudium Gute gesunde Schule
unter dem Blickwinkel der beruflichen Praxis. In: Kehne M, Sting A-L, eds. Gesundheitskompetenzen
in Hochschulen entwickeln - Studierende für ihre berufliche Zukunft stärken,.
RLS Jakobymeyer GmbH; 2025:28–33.'
apa: Decker, C., Waltert, C., Kehne, M., Satzinger, N., Strotmeyer, A., Tarampouskas,
A., Vlachos, M., & Wobbe, L. (2025). Das Profilstudium Gute gesunde Schule
unter dem Blickwinkel der beruflichen Praxis. In M. Kehne & A.-L. Sting (Eds.),
Gesundheitskompetenzen in Hochschulen entwickeln - Studierende für ihre berufliche
Zukunft stärken, (pp. 28–33). RLS Jakobymeyer GmbH.
bibtex: '@inbook{Decker_Waltert_Kehne_Satzinger_Strotmeyer_Tarampouskas_Vlachos_Wobbe_2025,
title={Das Profilstudium Gute gesunde Schule unter dem Blickwinkel der beruflichen
Praxis}, booktitle={Gesundheitskompetenzen in Hochschulen entwickeln - Studierende
für ihre berufliche Zukunft stärken,}, publisher={RLS Jakobymeyer GmbH}, author={Decker,
Claudia and Waltert, Carolin and Kehne, Miriam and Satzinger, Nicole and Strotmeyer,
Anne and Tarampouskas, Antje and Vlachos, Maximilian and Wobbe, Lena}, editor={Kehne,
Miriam and Sting, Anna-Lena}, year={2025}, pages={28–33} }'
chicago: Decker, Claudia, Carolin Waltert, Miriam Kehne, Nicole Satzinger, Anne
Strotmeyer, Antje Tarampouskas, Maximilian Vlachos, and Lena Wobbe. “Das Profilstudium
Gute gesunde Schule unter dem Blickwinkel der beruflichen Praxis.” In Gesundheitskompetenzen
in Hochschulen entwickeln - Studierende für ihre berufliche Zukunft stärken,
edited by Miriam Kehne and Anna-Lena Sting, 28–33. RLS Jakobymeyer GmbH, 2025.
ieee: C. Decker et al., “Das Profilstudium Gute gesunde Schule unter dem
Blickwinkel der beruflichen Praxis,” in Gesundheitskompetenzen in Hochschulen
entwickeln - Studierende für ihre berufliche Zukunft stärken, M. Kehne and
A.-L. Sting, Eds. RLS Jakobymeyer GmbH, 2025, pp. 28–33.
mla: Decker, Claudia, et al. “Das Profilstudium Gute gesunde Schule unter dem Blickwinkel
der beruflichen Praxis.” Gesundheitskompetenzen in Hochschulen entwickeln -
Studierende für ihre berufliche Zukunft stärken, edited by Miriam Kehne and
Anna-Lena Sting, RLS Jakobymeyer GmbH, 2025, pp. 28–33.
short: 'C. Decker, C. Waltert, M. Kehne, N. Satzinger, A. Strotmeyer, A. Tarampouskas,
M. Vlachos, L. Wobbe, in: M. Kehne, A.-L. Sting (Eds.), Gesundheitskompetenzen
in Hochschulen entwickeln - Studierende für ihre berufliche Zukunft stärken, RLS
Jakobymeyer GmbH, 2025, pp. 28–33.'
date_created: 2025-08-06T14:29:45Z
date_updated: 2025-08-06T14:31:39Z
department:
- _id: '33'
editor:
- first_name: Miriam
full_name: Kehne, Miriam
last_name: Kehne
- first_name: Anna-Lena
full_name: Sting, Anna-Lena
last_name: Sting
language:
- iso: ger
page: 28–33
publication: Gesundheitskompetenzen in Hochschulen entwickeln - Studierende für ihre
berufliche Zukunft stärken,
publication_status: published
publisher: RLS Jakobymeyer GmbH
status: public
title: Das Profilstudium Gute gesunde Schule unter dem Blickwinkel der beruflichen
Praxis
type: book_chapter
user_id: '31046'
year: '2025'
...
---
_id: '60885'
abstract:
- lang: eng
text: To reduce transport-related environmental impacts, innovative mobility system
approaches such as on-demand services are being developed. These can include operating
vehicles that differ regarding their characteristics and application profile from
privately owned cars in motorized individual transport. Studies on life cycle
assessment and life cycle engineering of vehicle lightweight structures are mainly
limited to these privately owned cars and the impact category of climate change.
In this paper, a method for life cycle assessment-based engineering of lightweight
structures in vehicles for various mobility system applications, including on-demand
mobility services, is developed. The method enables the holistic life cycle assessment
of lightweight structures in different mobility system applications considering
parameter changes at the upstream products, component, subsystem, vehicle and
mobility system levels, as well as the integration of results into engineering
activities. A case study is used to show that the vehicle and mobility system
application of lightweight structures can significantly influence their environmental
impacts and the selection of ecologically preferable product designs. The application
in vehicles for on-demand mobility services can lead to an increase in absolute
use stage energy demand and environmental impacts compared to applications in
privately owned vehicles for motorized individual transport. However, normalized
to the transport performance provided, the lifecycle environmental impacts of
structural components in vehicles for on-demand mobility services can be lower
than in vehicles for motorized individual transport. The paper contributes methodically
and with quantitative results to improved decision making in life cycle engineering
activities for lightweight structures in mobility system applications.
article_number: '101058'
article_type: original
author:
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Eric
full_name: Dierkes, Eric
last_name: Dierkes
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Ostermann M, Dierkes E, Marten T, Tröster T. Life cycle engineering of lightweight
structures in vehicles for on-demand mobility services. Cleaner Engineering
and Technology. 2025;28. doi:10.1016/j.clet.2025.101058
apa: Ostermann, M., Dierkes, E., Marten, T., & Tröster, T. (2025). Life cycle
engineering of lightweight structures in vehicles for on-demand mobility services.
Cleaner Engineering and Technology, 28, Article 101058. https://doi.org/10.1016/j.clet.2025.101058
bibtex: '@article{Ostermann_Dierkes_Marten_Tröster_2025, title={Life cycle engineering
of lightweight structures in vehicles for on-demand mobility services}, volume={28},
DOI={10.1016/j.clet.2025.101058},
number={101058}, journal={Cleaner Engineering and Technology}, publisher={Elsevier
BV}, author={Ostermann, Moritz and Dierkes, Eric and Marten, Thorsten and Tröster,
Thomas}, year={2025} }'
chicago: Ostermann, Moritz, Eric Dierkes, Thorsten Marten, and Thomas Tröster. “Life
Cycle Engineering of Lightweight Structures in Vehicles for On-Demand Mobility
Services.” Cleaner Engineering and Technology 28 (2025). https://doi.org/10.1016/j.clet.2025.101058.
ieee: 'M. Ostermann, E. Dierkes, T. Marten, and T. Tröster, “Life cycle engineering
of lightweight structures in vehicles for on-demand mobility services,” Cleaner
Engineering and Technology, vol. 28, Art. no. 101058, 2025, doi: 10.1016/j.clet.2025.101058.'
mla: Ostermann, Moritz, et al. “Life Cycle Engineering of Lightweight Structures
in Vehicles for On-Demand Mobility Services.” Cleaner Engineering and Technology,
vol. 28, 101058, Elsevier BV, 2025, doi:10.1016/j.clet.2025.101058.
short: M. Ostermann, E. Dierkes, T. Marten, T. Tröster, Cleaner Engineering and
Technology 28 (2025).
date_created: 2025-08-06T06:53:27Z
date_updated: 2025-08-07T06:41:28Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.clet.2025.101058
intvolume: ' 28'
keyword:
- Life cycle assessment
- Life cycle engineering
- Lightweight design
- On-demand mobility
- Shared mobility
- Mobility services
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S2666790825001818?via%3Dihub
oa: '1'
project:
- _id: '780'
grant_number: 19S23003Q
name: 'NeMobil: NeMo.bil – System kooperierender Fahrzeuge für einen individualisierten
Öffentlichen Verkehr'
- _id: '405'
grant_number: '005-2111-0020 '
name: 'Climate bOWL: Climate bOWL: Climate neutral Business in Ostwestfalen-Lippe'
publication: Cleaner Engineering and Technology
publication_identifier:
issn:
- 2666-7908
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Life cycle engineering of lightweight structures in vehicles for on-demand
mobility services
type: journal_article
user_id: '44763'
volume: 28
year: '2025'
...
---
_id: '61110'
abstract:
- lang: eng
text: 'By analyzing the physics of multi-photon absorption in superconducting
nanowire single-photon detectors (SNSPDs), we identify physical components of
jitter. From this, we formulate a quantitative physical model of the multi-photon
detector response that combines the local detection mechanism and local fluctuations
(hotspot formation and intrinsic jitter) with the thermoelectric dynamics of resistive
domains. Our model provides an excellent description of the arrival-time histogram
of a commercial SNSPD across several orders of magnitude, both in arrival-time
probability and across mean photon number. This is achieved with just three fitting
parameters: the scaling of the mean arrival time of voltage response pulses, as
well as the Gaussian and exponential jitter components. Our findings have important
implications for photon-number-resolving detector design, as well as applications
requiring low jitter, such as light detection and ranging (LIDAR).'
article_number: '086113'
article_type: original
author:
- first_name: Mariia
full_name: Sidorova, Mariia
last_name: Sidorova
- first_name: Timon
full_name: Schapeler, Timon
id: '55629'
last_name: Schapeler
orcid: 0000-0001-7652-1716
- first_name: Alexej D.
full_name: Semenov, Alexej D.
last_name: Semenov
- first_name: Fabian
full_name: Schlue, Fabian
id: '63579'
last_name: Schlue
- first_name: Michael
full_name: Stefszky, Michael
id: '42777'
last_name: Stefszky
- first_name: Benjamin
full_name: Brecht, Benjamin
id: '27150'
last_name: Brecht
orcid: '0000-0003-4140-0556 '
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
citation:
ama: Sidorova M, Schapeler T, Semenov AD, et al. Jitter in photon-number-resolved
detection by superconducting nanowires. APL Photonics. 2025;10(8). doi:10.1063/5.0273752
apa: Sidorova, M., Schapeler, T., Semenov, A. D., Schlue, F., Stefszky, M., Brecht,
B., Silberhorn, C., & Bartley, T. (2025). Jitter in photon-number-resolved
detection by superconducting nanowires. APL Photonics, 10(8), Article
086113. https://doi.org/10.1063/5.0273752
bibtex: '@article{Sidorova_Schapeler_Semenov_Schlue_Stefszky_Brecht_Silberhorn_Bartley_2025,
title={Jitter in photon-number-resolved detection by superconducting nanowires},
volume={10}, DOI={10.1063/5.0273752},
number={8086113}, journal={APL Photonics}, publisher={AIP Publishing}, author={Sidorova,
Mariia and Schapeler, Timon and Semenov, Alexej D. and Schlue, Fabian and Stefszky,
Michael and Brecht, Benjamin and Silberhorn, Christine and Bartley, Tim}, year={2025}
}'
chicago: Sidorova, Mariia, Timon Schapeler, Alexej D. Semenov, Fabian Schlue, Michael
Stefszky, Benjamin Brecht, Christine Silberhorn, and Tim Bartley. “Jitter in Photon-Number-Resolved
Detection by Superconducting Nanowires.” APL Photonics 10, no. 8 (2025).
https://doi.org/10.1063/5.0273752.
ieee: 'M. Sidorova et al., “Jitter in photon-number-resolved detection by
superconducting nanowires,” APL Photonics, vol. 10, no. 8, Art. no. 086113,
2025, doi: 10.1063/5.0273752.'
mla: Sidorova, Mariia, et al. “Jitter in Photon-Number-Resolved Detection by Superconducting
Nanowires.” APL Photonics, vol. 10, no. 8, 086113, AIP Publishing, 2025,
doi:10.1063/5.0273752.
short: M. Sidorova, T. Schapeler, A.D. Semenov, F. Schlue, M. Stefszky, B. Brecht,
C. Silberhorn, T. Bartley, APL Photonics 10 (2025).
date_created: 2025-09-01T11:12:19Z
date_updated: 2025-09-02T10:47:08Z
department:
- _id: '623'
- _id: '15'
doi: 10.1063/5.0273752
external_id:
arxiv:
- arXiv:2503.17146
intvolume: ' 10'
issue: '8'
keyword:
- Jitter
- PNR
- SNSPD
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '191'
name: 'PhoQuant: Photonische Quantencomputer - Quantencomputing Testplattform'
- _id: '239'
name: 'ERC-Grant: QuESADILLA: Quantum Engineering Superconducting Array Detectors
in Low-Light Applications'
publication: APL Photonics
publication_identifier:
issn:
- 2378-0967
publication_status: published
publisher: AIP Publishing
status: public
title: Jitter in photon-number-resolved detection by superconducting nanowires
type: journal_article
user_id: '55629'
volume: 10
year: '2025'
...
---
_id: '61139'
article_number: '149015'
author:
- first_name: Nina
full_name: Pfeffer, Nina
last_name: Pfeffer
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Werner
full_name: Feix, Werner
last_name: Feix
- first_name: Nils
full_name: Kälble, Nils
last_name: Kälble
- first_name: Mathias
full_name: Merten, Mathias
last_name: Merten
- first_name: Andreas
full_name: Stark, Andreas
last_name: Stark
- first_name: Andre
full_name: Haufe, Andre
last_name: Haufe
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Heinz Werner
full_name: Höppel, Heinz Werner
last_name: Höppel
citation:
ama: 'Pfeffer N, Kaiser MA, Feix W, et al. Energy- and material-efficient Ti-6Al-4V
sheet part fabrication by the novel TISTRAQ-process, including resistance heating
and tool-based quenching: Insights into test stand design and material potential.
Materials Science and Engineering: A. 2025;945. doi:10.1016/j.msea.2025.149015'
apa: 'Pfeffer, N., Kaiser, M. A., Feix, W., Kälble, N., Merten, M., Stark, A., Haufe,
A., Meyer, T., Tröster, T., & Höppel, H. W. (2025). Energy- and material-efficient
Ti-6Al-4V sheet part fabrication by the novel TISTRAQ-process, including resistance
heating and tool-based quenching: Insights into test stand design and material
potential. Materials Science and Engineering: A, 945, Article 149015.
https://doi.org/10.1016/j.msea.2025.149015'
bibtex: '@article{Pfeffer_Kaiser_Feix_Kälble_Merten_Stark_Haufe_Meyer_Tröster_Höppel_2025,
title={Energy- and material-efficient Ti-6Al-4V sheet part fabrication by the
novel TISTRAQ-process, including resistance heating and tool-based quenching:
Insights into test stand design and material potential}, volume={945}, DOI={10.1016/j.msea.2025.149015},
number={149015}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Pfeffer, Nina and Kaiser, Maximilian Alexander and Feix, Werner and
Kälble, Nils and Merten, Mathias and Stark, Andreas and Haufe, Andre and Meyer,
Thomas and Tröster, Thomas and Höppel, Heinz Werner}, year={2025} }'
chicago: 'Pfeffer, Nina, Maximilian Alexander Kaiser, Werner Feix, Nils Kälble,
Mathias Merten, Andreas Stark, Andre Haufe, Thomas Meyer, Thomas Tröster, and
Heinz Werner Höppel. “Energy- and Material-Efficient Ti-6Al-4V Sheet Part Fabrication
by the Novel TISTRAQ-Process, Including Resistance Heating and Tool-Based Quenching:
Insights into Test Stand Design and Material Potential.” Materials Science
and Engineering: A 945 (2025). https://doi.org/10.1016/j.msea.2025.149015.'
ieee: 'N. Pfeffer et al., “Energy- and material-efficient Ti-6Al-4V sheet
part fabrication by the novel TISTRAQ-process, including resistance heating and
tool-based quenching: Insights into test stand design and material potential,”
Materials Science and Engineering: A, vol. 945, Art. no. 149015, 2025,
doi: 10.1016/j.msea.2025.149015.'
mla: 'Pfeffer, Nina, et al. “Energy- and Material-Efficient Ti-6Al-4V Sheet Part
Fabrication by the Novel TISTRAQ-Process, Including Resistance Heating and Tool-Based
Quenching: Insights into Test Stand Design and Material Potential.” Materials
Science and Engineering: A, vol. 945, 149015, Elsevier BV, 2025, doi:10.1016/j.msea.2025.149015.'
short: 'N. Pfeffer, M.A. Kaiser, W. Feix, N. Kälble, M. Merten, A. Stark, A. Haufe,
T. Meyer, T. Tröster, H.W. Höppel, Materials Science and Engineering: A 945 (2025).'
date_created: 2025-09-06T06:41:08Z
date_updated: 2025-09-07T10:37:00Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.msea.2025.149015
intvolume: ' 945'
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
status: public
title: 'Energy- and material-efficient Ti-6Al-4V sheet part fabrication by the novel
TISTRAQ-process, including resistance heating and tool-based quenching: Insights
into test stand design and material potential'
type: journal_article
user_id: '72351'
volume: 945
year: '2025'
...
---
_id: '65011'
abstract:
- lang: eng
text: "Abstract\r\n Design of
single screw machines for polymer processing often focuses on the melt dominated
areas of the screw. However, solids conveying is a key aspect for processes with
high screw speeds, grooved feed sections, small screw diameters and material with
low bulk density. In injection moulding, throughput limitations are highly relevant
in packaging applications as due to low cooling times, plasticizing affects the
cycle time. In addition, insufficient solids conveying is a primary cause for
air residues in the melt and final product. Therefore, well-designed feed sections
are required, especially as direct processing of regrind in recycling applications
becomes more relevant due to governmental restrictions. Existing models for injection
moulding are based on analytical equations and do not allow to assess new feed
sections and feed opening designs, adapted to high screw speeds or regrind. In
this paper, numerical simulations based on the Discrete Element Method (DEM),
previously used in the field of extrusion, are carried out. In order to replicate
the cyclic, superimposed rotation and translation of the screw, a coupled approach
of DEM and Multibody Systems Simulation (MBS) is pursued. To verify the accuracy
of such coupled simulations, a special test setup is added to a conventional injection
moulding machine. Pure solids conveying is investigated, as DEM does not accommodate
for large plastic deformations or melting. Different screw and intake designs
as well as smooth and grooved barrels are investigated. Selected resins, pellet
shapes and regrind are processed, varying the processing parameters and comparing
the results to the simulation. The coupled approach replicates reality well in
terms of throughput, confirming that DEM can be utilised to further investigate
process phenomena and develop calculation models for solids conveying in injection
moulding."
author:
- first_name: Jan
full_name: Landgräber, Jan
id: '64499'
last_name: Landgräber
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Landgräber J, Schöppner V, Brüning F. Assessing solids conveying in injection
moulding machines using coupled numerical simulations based on the discrete element
method (DEM) and multibody systems (MBS). International Polymer Processing.
2025;41(1):1-14. doi:10.1515/ipp-2025-0065
apa: Landgräber, J., Schöppner, V., & Brüning, F. (2025). Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS). International Polymer
Processing, 41(1), 1–14. https://doi.org/10.1515/ipp-2025-0065
bibtex: '@article{Landgräber_Schöppner_Brüning_2025, title={Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS)}, volume={41}, DOI={10.1515/ipp-2025-0065}, number={1},
journal={International Polymer Processing}, publisher={Walter de Gruyter GmbH},
author={Landgräber, Jan and Schöppner, Volker and Brüning, Florian}, year={2025},
pages={1–14} }'
chicago: 'Landgräber, Jan, Volker Schöppner, and Florian Brüning. “Assessing Solids
Conveying in Injection Moulding Machines Using Coupled Numerical Simulations Based
on the Discrete Element Method (DEM) and Multibody Systems (MBS).” International
Polymer Processing 41, no. 1 (2025): 1–14. https://doi.org/10.1515/ipp-2025-0065.'
ieee: 'J. Landgräber, V. Schöppner, and F. Brüning, “Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS),” International Polymer
Processing, vol. 41, no. 1, pp. 1–14, 2025, doi: 10.1515/ipp-2025-0065.'
mla: Landgräber, Jan, et al. “Assessing Solids Conveying in Injection Moulding Machines
Using Coupled Numerical Simulations Based on the Discrete Element Method (DEM)
and Multibody Systems (MBS).” International Polymer Processing, vol. 41,
no. 1, Walter de Gruyter GmbH, 2025, pp. 1–14, doi:10.1515/ipp-2025-0065.
short: J. Landgräber, V. Schöppner, F. Brüning, International Polymer Processing
41 (2025) 1–14.
date_created: 2026-03-16T14:34:08Z
date_updated: 2026-03-16T14:36:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0065
intvolume: ' 41'
issue: '1'
language:
- iso: eng
page: 1-14
publication: International Polymer Processing
publication_identifier:
issn:
- 0930-777X
- 2195-8602
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Assessing solids conveying in injection moulding machines using coupled numerical
simulations based on the discrete element method (DEM) and multibody systems (MBS)
type: journal_article
user_id: '59363'
volume: 41
year: '2025'
...
---
_id: '60566'
article_number: '074402'
author:
- first_name: Adriana
full_name: Bocchini, Adriana
id: '58349'
last_name: Bocchini
orcid: 0000-0002-2134-3075
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Laura
full_name: Bollmers, Laura
id: '61375'
last_name: Bollmers
- first_name: Sebastian
full_name: Lengeling, Sebastian
id: '44373'
last_name: Lengeling
- first_name: Philipp
full_name: Mues, Philipp
id: '49772'
last_name: Mues
orcid: 0000-0003-0643-7636
- first_name: Laura
full_name: Padberg, Laura
id: '40300'
last_name: Padberg
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
citation:
ama: 'Bocchini A, Rüsing M, Bollmers L, et al. Mg dopants in lithium niobate: Defect
models and impact on domain inversion. Physical Review Materials. 2025;9(7).
doi:10.1103/5wz1-bjyr'
apa: 'Bocchini, A., Rüsing, M., Bollmers, L., Lengeling, S., Mues, P., Padberg,
L., Gerstmann, U., Silberhorn, C., Eigner, C., & Schmidt, W. G. (2025). Mg
dopants in lithium niobate: Defect models and impact on domain inversion. Physical
Review Materials, 9(7), Article 074402. https://doi.org/10.1103/5wz1-bjyr'
bibtex: '@article{Bocchini_Rüsing_Bollmers_Lengeling_Mues_Padberg_Gerstmann_Silberhorn_Eigner_Schmidt_2025,
title={Mg dopants in lithium niobate: Defect models and impact on domain inversion},
volume={9}, DOI={10.1103/5wz1-bjyr},
number={7074402}, journal={Physical Review Materials}, publisher={American Physical
Society (APS)}, author={Bocchini, Adriana and Rüsing, Michael and Bollmers, Laura
and Lengeling, Sebastian and Mues, Philipp and Padberg, Laura and Gerstmann, Uwe
and Silberhorn, Christine and Eigner, Christof and Schmidt, Wolf Gero}, year={2025}
}'
chicago: 'Bocchini, Adriana, Michael Rüsing, Laura Bollmers, Sebastian Lengeling,
Philipp Mues, Laura Padberg, Uwe Gerstmann, Christine Silberhorn, Christof Eigner,
and Wolf Gero Schmidt. “Mg Dopants in Lithium Niobate: Defect Models and Impact
on Domain Inversion.” Physical Review Materials 9, no. 7 (2025). https://doi.org/10.1103/5wz1-bjyr.'
ieee: 'A. Bocchini et al., “Mg dopants in lithium niobate: Defect models
and impact on domain inversion,” Physical Review Materials, vol. 9, no.
7, Art. no. 074402, 2025, doi: 10.1103/5wz1-bjyr.'
mla: 'Bocchini, Adriana, et al. “Mg Dopants in Lithium Niobate: Defect Models and
Impact on Domain Inversion.” Physical Review Materials, vol. 9, no. 7,
074402, American Physical Society (APS), 2025, doi:10.1103/5wz1-bjyr.'
short: A. Bocchini, M. Rüsing, L. Bollmers, S. Lengeling, P. Mues, L. Padberg, U.
Gerstmann, C. Silberhorn, C. Eigner, W.G. Schmidt, Physical Review Materials 9
(2025).
date_created: 2025-07-09T09:13:24Z
date_updated: 2026-03-17T17:50:06Z
ddc:
- '530'
department:
- _id: '15'
- _id: '623'
- _id: '295'
- _id: '790'
- _id: '288'
- _id: '230'
- _id: '429'
- _id: '35'
- _id: '170'
- _id: '169'
- _id: '27'
doi: 10.1103/5wz1-bjyr
file:
- access_level: open_access
content_type: application/pdf
creator: adrianab
date_created: 2025-07-09T09:18:45Z
date_updated: 2025-07-10T06:43:34Z
file_id: '60567'
file_name: Mg_dopants_LN_PRM.pdf
file_size: 4175120
relation: main_file
file_date_updated: 2025-07-10T06:43:34Z
has_accepted_license: '1'
intvolume: ' 9'
issue: '7'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.aps.org/doi/10.1103/5wz1-bjyr
oa: '1'
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '53'
name: 'TRR 142: TRR 142 - Maßgeschneiderte nichtlineare Photonik: Von grundlegenden
Konzepten zu funktionellen Strukturen'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '54'
name: 'TRR 142 - A: TRR 142 - Project Area A'
- _id: '168'
name: 'TRR 142 - B07: TRR 142 - Polaronen-Einfluss auf die optischen Eigenschaften
von Lithiumniobat (B07*)'
- _id: '166'
name: 'TRR 142 - A11: TRR 142 - Subproject A11'
publication: Physical Review Materials
publication_identifier:
issn:
- 2475-9953
publication_status: published
publisher: American Physical Society (APS)
status: public
title: 'Mg dopants in lithium niobate: Defect models and impact on domain inversion'
type: journal_article
user_id: '22501'
volume: 9
year: '2025'
...
---
_id: '64984'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Benjamin
full_name: Klie, Benjamin
last_name: Klie
- first_name: Ulrich
full_name: Giese, Ulrich
last_name: Giese
citation:
ama: 'Löhr F, Moritzer E, Klie B, Giese U. Untersuchung von Kombinationen aus Duroplasten
und Elastomeren für den einstufigen 2K-Spritzgießprozess. In: Technomer 2025
- 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren. Vol 29. Fachtagung
über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität
Chemnitz 06. bis 07. November 2025. ; 2025:25.'
apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Untersuchung von
Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess.
In Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren:
Vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025 (p. 25).'
bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Untersuchung von Kombinationen
aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess}, volume={29.
Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische
Universität Chemnitz 06. bis 07. November 2025}, booktitle={Technomer 2025 - 29.
Fachtagung über Verarbeitung und Anwendung von Polymeren}, author={Löhr, Florian
and Moritzer, Elmar and Klie, Benjamin and Giese, Ulrich}, year={2025}, pages={25}
}'
chicago: Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Untersuchung
von Kombinationen Aus Duroplasten Und Elastomeren Für Den Einstufigen 2K-Spritzgießprozess.”
In Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren,
29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische
Universität Chemnitz 06. bis 07. November 2025:25, 2025.
ieee: F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Untersuchung von Kombinationen
aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess,” in
Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren,
vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025, 2025, p. 25.
mla: Löhr, Florian, et al. “Untersuchung von Kombinationen Aus Duroplasten Und Elastomeren
Für Den Einstufigen 2K-Spritzgießprozess.” Technomer 2025 - 29. Fachtagung
Über Verarbeitung Und Anwendung von Polymeren, vol. 29. Fachtagung über Verarbeitung
und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis
07. November 2025, 2025, p. 25.
short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: Technomer 2025 - 29. Fachtagung
Über Verarbeitung Und Anwendung von Polymeren, 2025, p. 25.'
conference:
name: Technomer 2025
date_created: 2026-03-16T12:20:49Z
date_updated: 2026-03-18T09:06:05Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
keyword:
- BMC
- Duroplast
- Kautschuk
- Mehrkomponenten
- Spritzgießen
language:
- iso: eng
page: '25'
publication: Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren
status: public
title: Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen
2K-Spritzgießprozess
type: book_chapter
user_id: '59363'
volume: 29. Fachtagung über Verarbeitung und Anwendung von Polymeren -Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025
year: '2025'
...
---
_id: '64993'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
citation:
ama: 'Löhr F. Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk
im 2K-Spritzgießprozess. In: AZuR-Kolloquium 2025. ; 2025.'
apa: Löhr, F. (2025). Direkthaftung statt Klebstoff –Verbund von Duroplasten und
Kautschuk im 2K-Spritzgießprozess. AZuR-Kolloquium 2025.
bibtex: '@inproceedings{Löhr_2025, title={Direkthaftung statt Klebstoff –Verbund
von Duroplasten und Kautschuk im 2K-Spritzgießprozess}, booktitle={AZuR-Kolloquium
2025}, author={Löhr, Florian}, year={2025} }'
chicago: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten
Und Kautschuk Im 2K-Spritzgießprozess.” In AZuR-Kolloquium 2025, 2025.
ieee: F. Löhr, “Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk
im 2K-Spritzgießprozess,” 2025.
mla: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten Und
Kautschuk Im 2K-Spritzgießprozess.” AZuR-Kolloquium 2025, 2025.
short: 'F. Löhr, in: AZuR-Kolloquium 2025, 2025.'
date_created: 2026-03-16T13:51:45Z
date_updated: 2026-03-18T08:47:01Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
language:
- iso: eng
publication: AZuR-Kolloquium 2025
status: public
title: Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '64983'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Benjamin
full_name: Klie, Benjamin
last_name: Klie
- first_name: Ulrich
full_name: Giese, Ulrich
last_name: Giese
citation:
ama: 'Löhr F, Moritzer E, Klie B, Giese U. Thermoset–Rubber 2K Composite Systems:
Material Combinations and Interfacial Reactions in a One-Step Injection Molding
Process. In: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract
Book. ; 2025:227–228.'
apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process. In International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book (pp. 227–228).'
bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process}, booktitle={International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin
and Giese, Ulrich}, year={2025}, pages={227–228} }'
chicago: 'Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process.” In International Rubber Conference (IRC) 2025,
Bangkok, BITEC; e-Abstract Book, 227–228, 2025.'
ieee: 'F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process,” in International Rubber Conference (IRC) 2025, Bangkok, BITEC;
e-abstract book, 2025, pp. 227–228.'
mla: 'Löhr, Florian, et al. “Thermoset–Rubber 2K Composite Systems: Material Combinations
and Interfacial Reactions in a One-Step Injection Molding Process.” International
Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: International Rubber Conference
(IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
conference:
name: International Rubber Conference IRC 2025
date_created: 2026-03-16T12:20:49Z
date_updated: 2026-03-18T09:07:10Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
keyword:
- BMC
- Duroplast
- Kautschuk
- Mehrkomponenten
- Spritzgießen
language:
- iso: eng
page: 227–228
publication: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract
book
quality_controlled: '1'
status: public
title: 'Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial
Reactions in a One-Step Injection Molding Process'
type: book_chapter
user_id: '59363'
year: '2025'
...
---
_id: '65007'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Knaup F, Schöppner V. Improvement of a numerical two-phase simulation model
for single-screw plasticizing extruders based on experimental investigations.
International Polymer Processing. Published online 2025. doi:10.1515/ipp-2025-0072
apa: Knaup, F., & Schöppner, V. (2025). Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations. International Polymer Processing. https://doi.org/10.1515/ipp-2025-0072
bibtex: '@article{Knaup_Schöppner_2025, title={Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations}, DOI={10.1515/ipp-2025-0072},
journal={International Polymer Processing}, author={Knaup, Felix and Schöppner,
Volker}, year={2025} }'
chicago: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase
Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental
Investigations.” International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0072.
ieee: 'F. Knaup and V. Schöppner, “Improvement of a numerical two-phase simulation
model for single-screw plasticizing extruders based on experimental investigations,”
International Polymer Processing, 2025, doi: 10.1515/ipp-2025-0072.'
mla: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation
Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.”
International Polymer Processing, 2025, doi:10.1515/ipp-2025-0072.
short: F. Knaup, V. Schöppner, International Polymer Processing (2025).
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:17:45Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0072
keyword:
- CFD simulation
- melting modeling
- melting process
- polymer extrusion
- single-screw extruder
language:
- iso: eng
publication: International Polymer Processing
quality_controlled: '1'
status: public
title: Improvement of a numerical two-phase simulation model for single-screw plasticizing
extruders based on experimental investigations
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65005'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Florian
full_name: Brüning, Florian
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knaup F, Brüning F, Schöppner V. Improving an Analytical Model of Melting
in Single Screw Extruders considering the Delay Zone Length. In: Annual Technical
Conference of the Society of Plastics Engineers (ANTEC 2025). ; 2025.'
apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length.
Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025).
bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length},
booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025}
}'
chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Improving an Analytical
Model of Melting in Single Screw Extruders Considering the Delay Zone Length.”
In Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025), 2025.
ieee: F. Knaup, F. Brüning, and V. Schöppner, “Improving an Analytical Model of
Melting in Single Screw Extruders considering the Delay Zone Length,” 2025.
mla: Knaup, Felix, et al. “Improving an Analytical Model of Melting in Single Screw
Extruders Considering the Delay Zone Length.” Annual Technical Conference of
the Society of Plastics Engineers (ANTEC 2025), 2025.
short: 'F. Knaup, F. Brüning, V. Schöppner, in: Annual Technical Conference of the
Society of Plastics Engineers (ANTEC 2025), 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:23:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Aufschmelzen
- Aufschmelzmodellierung
- delay zone
- extrusion
- melting modeling
language:
- iso: eng
publication: Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)
quality_controlled: '1'
status: public
title: Improving an Analytical Model of Melting in Single Screw Extruders considering
the Delay Zone Length
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65006'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knaup F, Brüning F, Schöppner V. Bestimmung der Feststoffbettfestigkeit zur
Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. In: Technomer
2025 29. Fachtagung. ; 2025.'
apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. Technomer
2025 29. Fachtagung.
bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder}, booktitle={Technomer
2025 29. Fachtagung}, author={Knaup, Felix and Brüning, Florian and Schöppner,
Volker}, year={2025} }'
chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder.” In Technomer
2025 29. Fachtagung, 2025.
ieee: F. Knaup, F. Brüning, and V. Schöppner, “Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder,” 2025.
mla: Knaup, Felix, et al. “Bestimmung der Feststoffbettfestigkeit zur Vorhersage
von Feststoffbettbrüchen im Einschneckenextruder.” Technomer 2025 29. Fachtagung,
2025.
short: 'F. Knaup, F. Brüning, V. Schöppner, in: Technomer 2025 29. Fachtagung, 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:11:44Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Aufschmelzen
- Aufschmelzmodellierung
- Feststoffbett
- melting modeling
language:
- iso: ger
publication: Technomer 2025 29. Fachtagung
publication_identifier:
isbn:
- 978-3-939382-17-1
status: public
title: Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen
im Einschneckenextruder
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65003'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Kleinschmidt D, Schöppner V. Characterization of the wall slip behavior of
filled rubber compounds considering the critical wall shear stress. In: Gummitekniska
Förening S, ed. RubberCon 2025. ; 2025.'
apa: Kleinschmidt, D., & Schöppner, V. (2025). Characterization of the wall
slip behavior of filled rubber compounds considering the critical wall shear stress.
In S. Gummitekniska Förening (Ed.), RubberCon 2025.
bibtex: '@inproceedings{Kleinschmidt_Schöppner_2025, title={Characterization of
the wall slip behavior of filled rubber compounds considering the critical wall
shear stress}, booktitle={RubberCon 2025}, author={Kleinschmidt, Dennis and Schöppner,
Volker}, editor={Gummitekniska Förening, Sveriges}, year={2025} }'
chicago: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall
Slip Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.”
In RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025.
ieee: D. Kleinschmidt and V. Schöppner, “Characterization of the wall slip behavior
of filled rubber compounds considering the critical wall shear stress,” in RubberCon
2025, 2025.
mla: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall Slip
Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.”
RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025.
short: 'D. Kleinschmidt, V. Schöppner, in: S. Gummitekniska Förening (Ed.), RubberCon
2025, 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:10:31Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
editor:
- first_name: Sveriges
full_name: Gummitekniska Förening, Sveriges
last_name: Gummitekniska Förening
keyword:
- Kautschuk
- Rheologie
- Wandgleiten
language:
- iso: eng
publication: RubberCon 2025
status: public
title: Characterization of the wall slip behavior of filled rubber compounds considering
the critical wall shear stress
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65009'
author:
- first_name: Leon
full_name: Schmidt, Leon
id: '63035'
last_name: Schmidt
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: 'Schmidt L, Schöppner V, Brüning F. Findings on pinless screw design for rubber
extrusion. In: Gummitekniska Förening S, Swedish N and F rubber associations,
eds. RubberCon 2025. ; 2025.'
apa: Schmidt, L., Schöppner, V., & Brüning, F. (2025). Findings on pinless screw
design for rubber extrusion. In S. Gummitekniska Förening & N. and F. rubber
associations Swedish (Eds.), RubberCon 2025.
bibtex: '@inproceedings{Schmidt_Schöppner_Brüning_2025, title={Findings on pinless
screw design for rubber extrusion}, booktitle={RubberCon 2025}, author={Schmidt,
Leon and Schöppner, Volker and Brüning, Florian}, editor={Gummitekniska Förening,
Sveriges and Swedish, Norwegian and Finnish rubber associations}, year={2025}
}'
chicago: Schmidt, Leon, Volker Schöppner, and Florian Brüning. “Findings on Pinless
Screw Design for Rubber Extrusion.” In RubberCon 2025, edited by Sveriges
Gummitekniska Förening and Norwegian and Finnish rubber associations Swedish,
2025.
ieee: L. Schmidt, V. Schöppner, and F. Brüning, “Findings on pinless screw design
for rubber extrusion,” in RubberCon 2025, 2025.
mla: Schmidt, Leon, et al. “Findings on Pinless Screw Design for Rubber Extrusion.”
RubberCon 2025, edited by Sveriges Gummitekniska Förening and Norwegian
and Finnish rubber associations Swedish, 2025.
short: 'L. Schmidt, V. Schöppner, F. Brüning, in: S. Gummitekniska Förening, N.
and F. rubber associations Swedish (Eds.), RubberCon 2025, 2025.'
date_created: 2026-03-16T14:23:35Z
date_updated: 2026-03-18T09:08:34Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
editor:
- first_name: Sveriges
full_name: Gummitekniska Förening, Sveriges
last_name: Gummitekniska Förening
- first_name: Norwegian and Finnish rubber associations
full_name: Swedish, Norwegian and Finnish rubber associations
last_name: Swedish
keyword:
- extrusion
- Kautschuk
- Simulation
language:
- iso: eng
publication: RubberCon 2025
status: public
title: Findings on pinless screw design for rubber extrusion
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65008'
author:
- first_name: Leon
full_name: Schmidt, Leon
id: '63035'
last_name: Schmidt
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Schmidt L, Brüning F. Investigation of alternative pinless screw concepts for
rubber extrusion. KGK - Kautschuk Gummi Kunststoffe. 2025;78. Jahrgang(2/25):34–40.
apa: Schmidt, L., & Brüning, F. (2025). Investigation of alternative pinless
screw concepts for rubber extrusion. KGK - Kautschuk Gummi Kunststoffe,
78. Jahrgang(2/25), 34–40.
bibtex: '@article{Schmidt_Brüning_2025, title={Investigation of alternative pinless
screw concepts for rubber extrusion}, volume={78. Jahrgang}, number={2/25}, journal={KGK
- Kautschuk Gummi Kunststoffe}, author={Schmidt, Leon and Brüning, Florian}, year={2025},
pages={34–40} }'
chicago: 'Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless
Screw Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe
78. Jahrgang, no. 2/25 (2025): 34–40.'
ieee: L. Schmidt and F. Brüning, “Investigation of alternative pinless screw concepts
for rubber extrusion,” KGK - Kautschuk Gummi Kunststoffe, vol. 78. Jahrgang,
no. 2/25, pp. 34–40, 2025.
mla: Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless Screw
Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe, vol.
78. Jahrgang, no. 2/25, 2025, pp. 34–40.
short: L. Schmidt, F. Brüning, KGK - Kautschuk Gummi Kunststoffe 78. Jahrgang (2025)
34–40.
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:23:12Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
issue: 2/25
keyword:
- extrusion
- Kautschuk
language:
- iso: eng
page: 34–40
publication: KGK - Kautschuk Gummi Kunststoffe
status: public
title: Investigation of alternative pinless screw concepts for rubber extrusion
type: journal_article
user_id: '59363'
volume: 78. Jahrgang
year: '2025'
...
---
_id: '65000'
author:
- first_name: Felix Paul
full_name: Hanselle, Felix Paul
id: '62320'
last_name: Hanselle
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Hanselle FP, Schöppner V, Brüning F. Consideration of modeled pressure dependent
viscosity data in injection molding simulation. International Polymer Processing.
Published online 2025. doi:10.1515/ipp-2025-0074
apa: Hanselle, F. P., Schöppner, V., & Brüning, F. (2025). Consideration of
modeled pressure dependent viscosity data in injection molding simulation. International
Polymer Processing. https://doi.org/10.1515/ipp-2025-0074
bibtex: '@article{Hanselle_Schöppner_Brüning_2025, title={Consideration of modeled
pressure dependent viscosity data in injection molding simulation}, DOI={10.1515/ipp-2025-0074},
journal={International Polymer Processing}, author={Hanselle, Felix Paul and Schöppner,
Volker and Brüning, Florian}, year={2025} }'
chicago: Hanselle, Felix Paul, Volker Schöppner, and Florian Brüning. “Consideration
of Modeled Pressure Dependent Viscosity Data in Injection Molding Simulation.”
International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0074.
ieee: 'F. P. Hanselle, V. Schöppner, and F. Brüning, “Consideration of modeled pressure
dependent viscosity data in injection molding simulation,” International Polymer
Processing, 2025, doi: 10.1515/ipp-2025-0074.'
mla: Hanselle, Felix Paul, et al. “Consideration of Modeled Pressure Dependent Viscosity
Data in Injection Molding Simulation.” International Polymer Processing,
2025, doi:10.1515/ipp-2025-0074.
short: F.P. Hanselle, V. Schöppner, F. Brüning, International Polymer Processing
(2025).
date_created: 2026-03-16T14:23:33Z
date_updated: 2026-03-18T09:25:09Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0074
keyword:
- Druckabhängigkeit
- Rheologie
- Simulation
- Spritzgießen
- Viskosität
language:
- iso: eng
publication: International Polymer Processing
quality_controlled: '1'
status: public
title: Consideration of modeled pressure dependent viscosity data in injection molding
simulation
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65002'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Kleinschmidt D, Brüning F. Influence of pre-shearing on the rheological properties
of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe. Published
online 2025.
apa: Kleinschmidt, D., & Brüning, F. (2025). Influence of pre-shearing on the
rheological properties of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe.
bibtex: '@article{Kleinschmidt_Brüning_2025, title={Influence of pre-shearing on
the rheological properties of filled rubber compounds}, journal={KGK Kautschuk
Gummi Kunststoffe}, author={Kleinschmidt, Dennis and Brüning, Florian}, year={2025}
}'
chicago: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on
the Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi
Kunststoffe, 2025.
ieee: D. Kleinschmidt and F. Brüning, “Influence of pre-shearing on the rheological
properties of filled rubber compounds,” KGK Kautschuk Gummi Kunststoffe,
2025.
mla: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on the
Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi Kunststoffe,
2025.
short: D. Kleinschmidt, F. Brüning, KGK Kautschuk Gummi Kunststoffe (2025).
date_created: 2026-03-16T14:23:33Z
date_updated: 2026-03-18T09:28:22Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Rheologie
- Viskosität
- Wandgleiten
language:
- iso: eng
publication: KGK Kautschuk Gummi Kunststoffe
quality_controlled: '1'
status: public
title: Influence of pre-shearing on the rheological properties of filled rubber compounds
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65046'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
citation:
ama: 'Kleinschmidt D. Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden. In: Extrusion - Grundlagen
und Praxis. ; 2025.'
apa: Kleinschmidt, D. (2025). Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden. Extrusion - Grundlagen und
Praxis.
bibtex: '@inproceedings{Kleinschmidt_2025, place={Hannover}, title={Beschreibung
des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller
Methoden}, booktitle={Extrusion - Grundlagen und Praxis}, author={Kleinschmidt,
Dennis}, year={2025} }'
chicago: Kleinschmidt, Dennis. “Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden.” In Extrusion - Grundlagen
und Praxis. Hannover, 2025.
ieee: D. Kleinschmidt, “Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden,” 2025.
mla: Kleinschmidt, Dennis. “Beschreibung des Mischverhaltens von Kautschukstiftextrudern
mittels simulativer und experimenteller Methoden.” Extrusion - Grundlagen und
Praxis, 2025.
short: 'D. Kleinschmidt, in: Extrusion - Grundlagen und Praxis, Hannover, 2025.'
date_created: 2026-03-18T09:45:57Z
date_updated: 2026-03-18T09:45:59Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
language:
- iso: ger
place: Hannover
publication: Extrusion - Grundlagen und Praxis
status: public
title: Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer
und experimenteller Methoden
type: conference
user_id: '59363'
year: '2025'
...