--- _id: '34731' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Maximilian full_name: Richters, Maximilian id: '38221' last_name: Richters citation: ama: 'Moritzer E, Richters M. Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers. In: ; 2022.' apa: Moritzer, E., & Richters, M. (2022). Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers. 37th International Conference of the Polymer Processing Society (PPS), Fukuoka. bibtex: '@inproceedings{Moritzer_Richters_2022, title={Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers}, author={Moritzer, Elmar and Richters, Maximilian}, year={2022} }' chicago: Moritzer, Elmar, and Maximilian Richters. “Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers,” 2022. ieee: E. Moritzer and M. Richters, “Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022. mla: Moritzer, Elmar, and Maximilian Richters. Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers. 2022. short: 'E. Moritzer, M. Richters, in: 2022.' conference: location: Fukuoka name: 37th International Conference of the Polymer Processing Society (PPS) date_created: 2022-12-21T14:01:43Z date_updated: 2022-12-21T14:08:22Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Filling and Flow Behavior of Novel Wood-Filled Thermoplastic Elastomers type: conference user_id: '44116' year: '2022' ... --- _id: '34738' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Dennis full_name: Kleinschmidt, Dennis id: '40516' last_name: Kleinschmidt - first_name: C. full_name: Hopmann, C. last_name: Hopmann - first_name: A. full_name: Limper, A. last_name: Limper - first_name: F. full_name: Fey, F. last_name: Fey - first_name: M. full_name: Facklam, M. last_name: Facklam - first_name: M. full_name: Schön, M. last_name: Schön citation: ama: 'Schöppner V, Kleinschmidt D, Hopmann C, et al. Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds. In: ; 2022.' apa: Schöppner, V., Kleinschmidt, D., Hopmann, C., Limper, A., Fey, F., Facklam, M., & Schön, M. (2022). Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds. 31. Internationales Kolloquium Kunststofftechnik, Aachen. bibtex: '@inproceedings{Schöppner_Kleinschmidt_Hopmann_Limper_Fey_Facklam_Schön_2022, title={Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds}, author={Schöppner, Volker and Kleinschmidt, Dennis and Hopmann, C. and Limper, A. and Fey, F. and Facklam, M. and Schön, M.}, year={2022} }' chicago: Schöppner, Volker, Dennis Kleinschmidt, C. Hopmann, A. Limper, F. Fey, M. Facklam, and M. Schön. “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” 2022. ieee: V. Schöppner et al., “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” presented at the 31. Internationales Kolloquium Kunststofftechnik, Aachen, 2022. mla: Schöppner, Volker, et al. Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds. 2022. short: 'V. Schöppner, D. Kleinschmidt, C. Hopmann, A. Limper, F. Fey, M. Facklam, M. Schön, in: 2022.' conference: location: Aachen name: 31. Internationales Kolloquium Kunststofftechnik date_created: 2022-12-21T14:17:58Z date_updated: 2022-12-21T14:25:29Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds type: conference user_id: '44116' year: '2022' ... --- _id: '34735' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning citation: ama: 'Schöppner V, Brüning F. Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder. In: ; 2022.' apa: Schöppner, V., & Brüning, F. (2022). Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder. 37th International Conference of the Polymer Processing Society (PPS), Fukuoka. bibtex: '@inproceedings{Schöppner_Brüning_2022, title={Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder}, author={Schöppner, Volker and Brüning, Florian}, year={2022} }' chicago: Schöppner, Volker, and Florian Brüning. “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” 2022. ieee: V. Schöppner and F. Brüning, “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022. mla: Schöppner, Volker, and Florian Brüning. Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder. 2022. short: 'V. Schöppner, F. Brüning, in: 2022.' conference: location: Fukuoka name: 37th International Conference of the Polymer Processing Society (PPS) date_created: 2022-12-21T14:12:56Z date_updated: 2022-12-21T14:26:50Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder type: conference user_id: '44116' year: '2022' ... --- _id: '34734' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Jonas full_name: Köllermeier, Jonas last_name: Köllermeier citation: ama: 'Schöppner V, Köllermeier J. Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process. In: ; 2022.' apa: Schöppner, V., & Köllermeier, J. (2022). Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process. 37th International Conference of the Polymer Processing Society (PPS), Fukuoka. bibtex: '@inproceedings{Schöppner_Köllermeier_2022, title={Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process}, author={Schöppner, Volker and Köllermeier, Jonas}, year={2022} }' chicago: Schöppner, Volker, and Jonas Köllermeier. “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” 2022. ieee: V. Schöppner and J. Köllermeier, “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022. mla: Schöppner, Volker, and Jonas Köllermeier. Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process. 2022. short: 'V. Schöppner, J. Köllermeier, in: 2022.' conference: location: Fukuoka name: 37th International Conference of the Polymer Processing Society (PPS) date_created: 2022-12-21T14:11:54Z date_updated: 2022-12-21T14:26:58Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process type: conference user_id: '44116' year: '2022' ... --- _id: '34737' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Maximilian full_name: Frank, Maximilian id: '38255' last_name: Frank citation: ama: 'Schöppner V, Frank M. Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis. In: ; 2022.' apa: Schöppner, V., & Frank, M. (2022). Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis. 37th International Conference of the Polymer Processing Society (PPS), Fukuoka. bibtex: '@inproceedings{Schöppner_Frank_2022, title={Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis}, author={Schöppner, Volker and Frank, Maximilian}, year={2022} }' chicago: Schöppner, Volker, and Maximilian Frank. “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” 2022. ieee: V. Schöppner and M. Frank, “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022. mla: Schöppner, Volker, and Maximilian Frank. Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis. 2022. short: 'V. Schöppner, M. Frank, in: 2022.' conference: location: Fukuoka name: 37th International Conference of the Polymer Processing Society (PPS) date_created: 2022-12-21T14:15:00Z date_updated: 2022-12-21T14:26:07Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis type: conference user_id: '44116' year: '2022' ... --- _id: '34740' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Matthias full_name: Altepeter, Matthias id: '33420' last_name: Altepeter - first_name: S. full_name: Wanke, S. last_name: Wanke citation: ama: 'Schöppner V, Altepeter M, Wanke S. Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder. In: ; 2022.' apa: Schöppner, V., Altepeter, M., & Wanke, S. (2022). Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder. 37th International Conference of the Polymer Processing Society (PPS), Fukuoka. bibtex: '@inproceedings{Schöppner_Altepeter_Wanke_2022, title={Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder}, author={Schöppner, Volker and Altepeter, Matthias and Wanke, S.}, year={2022} }' chicago: Schöppner, Volker, Matthias Altepeter, and S. Wanke. “Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder,” 2022. ieee: V. Schöppner, M. Altepeter, and S. Wanke, “Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022. mla: Schöppner, Volker, et al. Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder. 2022. short: 'V. Schöppner, M. Altepeter, S. Wanke, in: 2022.' conference: location: Fukuoka name: 37th International Conference of the Polymer Processing Society (PPS) date_created: 2022-12-21T14:24:34Z date_updated: 2022-12-21T14:24:56Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder type: conference user_id: '44116' year: '2022' ... --- _id: '34752' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Dennis full_name: Kleinschmidt, Dennis id: '40516' last_name: Kleinschmidt - first_name: U. full_name: Nillius, U. last_name: Nillius - first_name: C. full_name: Hopmann, C. last_name: Hopmann citation: ama: Schöppner V, Kleinschmidt D, Nillius U, Hopmann C. Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen. GAK. 2022. apa: Schöppner, V., Kleinschmidt, D., Nillius, U., & Hopmann, C. (2022). Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen. GAK. bibtex: '@article{Schöppner_Kleinschmidt_Nillius_Hopmann_2022, title={Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen}, journal={GAK}, author={Schöppner, Volker and Kleinschmidt, Dennis and Nillius, U. and Hopmann, C.}, year={2022} }' chicago: Schöppner, Volker, Dennis Kleinschmidt, U. Nillius, and C. Hopmann. “Weiterentwicklung Eines Verfahrens Zur Korrektur von Wandgleiteffekten Im Rahmen Rheologischer Messungen an Gefüllten Kautschukmischungen.” GAK, 2022. ieee: V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen,” GAK, 2022. mla: Schöppner, Volker, et al. “Weiterentwicklung Eines Verfahrens Zur Korrektur von Wandgleiteffekten Im Rahmen Rheologischer Messungen an Gefüllten Kautschukmischungen.” GAK, 2022. short: V. Schöppner, D. Kleinschmidt, U. Nillius, C. Hopmann, GAK (2022). date_created: 2022-12-21T14:41:11Z date_updated: 2022-12-21T14:41:25Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng publication: GAK publication_date: '2022' status: public title: Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen type: newspaper_article user_id: '44116' year: '2022' ... --- _id: '34741' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: M. full_name: Kröker, M. last_name: Kröker - first_name: Maximilian full_name: Scholle, Maximilian id: '35736' last_name: Scholle citation: ama: Moritzer E, Kröker M, Scholle M. Rückführung Zerkleinerter Organobleche.; 2022. apa: Moritzer, E., Kröker, M., & Scholle, M. (2022). Rückführung zerkleinerter Organobleche. bibtex: '@book{Moritzer_Kröker_Scholle_2022, series={Composite United}, title={Rückführung zerkleinerter Organobleche}, author={Moritzer, Elmar and Kröker, M. and Scholle, Maximilian}, year={2022}, collection={Composite United} }' chicago: Moritzer, Elmar, M. Kröker, and Maximilian Scholle. Rückführung Zerkleinerter Organobleche. Composite United, 2022. ieee: E. Moritzer, M. Kröker, and M. Scholle, Rückführung zerkleinerter Organobleche. 2022. mla: Moritzer, Elmar, et al. Rückführung Zerkleinerter Organobleche. 2022. short: E. Moritzer, M. Kröker, M. Scholle, Rückführung Zerkleinerter Organobleche, 2022. date_created: 2022-12-21T14:33:18Z date_updated: 2022-12-21T14:41:56Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng publication_identifier: issn: - 2699-4534 series_title: Composite United status: public title: Rückführung zerkleinerter Organobleche type: report user_id: '44116' year: '2022' ... --- _id: '34746' author: - first_name: Matthias full_name: Hopp, Matthias id: '13142' last_name: Hopp - first_name: Lisa full_name: Tölle, Lisa id: '82465' last_name: Tölle citation: ama: Hopp M, Tölle L. Teilchen-Kunde - Stäube Beim Mechanischen Recycling Faserverstärkter Thermoplaste.; 2022. apa: Hopp, M., & Tölle, L. (2022). Teilchen-Kunde - Stäube beim mechanischen Recycling faserverstärkter Thermoplaste. bibtex: '@book{Hopp_Tölle_2022, series={Composite United}, title={Teilchen-Kunde - Stäube beim mechanischen Recycling faserverstärkter Thermoplaste}, author={Hopp, Matthias and Tölle, Lisa}, year={2022}, collection={Composite United} }' chicago: Hopp, Matthias, and Lisa Tölle. Teilchen-Kunde - Stäube Beim Mechanischen Recycling Faserverstärkter Thermoplaste. Composite United, 2022. ieee: M. Hopp and L. Tölle, Teilchen-Kunde - Stäube beim mechanischen Recycling faserverstärkter Thermoplaste. 2022. mla: Hopp, Matthias, and Lisa Tölle. Teilchen-Kunde - Stäube Beim Mechanischen Recycling Faserverstärkter Thermoplaste. 2022. short: M. Hopp, L. Tölle, Teilchen-Kunde - Stäube Beim Mechanischen Recycling Faserverstärkter Thermoplaste, 2022. date_created: 2022-12-21T14:36:39Z date_updated: 2022-12-21T14:41:42Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng series_title: Composite United status: public title: Teilchen-Kunde - Stäube beim mechanischen Recycling faserverstärkter Thermoplaste type: report user_id: '44116' year: '2022' ... --- _id: '34751' author: - first_name: Christoph Wilhelm Theodor full_name: Schall, Christoph Wilhelm Theodor id: '44224' last_name: Schall citation: ama: 'Schall CWT. Vorteilhaftes Prozessverhalten von Wave-Schnecken. In: ; 2022.' apa: Schall, C. W. T. (2022). Vorteilhaftes Prozessverhalten von Wave-Schnecken. 18. Duisburger Extrusionstagung, Duisburg. bibtex: '@inproceedings{Schall_2022, title={Vorteilhaftes Prozessverhalten von Wave-Schnecken}, author={Schall, Christoph Wilhelm Theodor}, year={2022} }' chicago: Schall, Christoph Wilhelm Theodor. “Vorteilhaftes Prozessverhalten von Wave-Schnecken,” 2022. ieee: C. W. T. Schall, “Vorteilhaftes Prozessverhalten von Wave-Schnecken,” presented at the 18. Duisburger Extrusionstagung, Duisburg, 2022. mla: Schall, Christoph Wilhelm Theodor. Vorteilhaftes Prozessverhalten von Wave-Schnecken. 2022. short: 'C.W.T. Schall, in: 2022.' conference: location: Duisburg name: 18. Duisburger Extrusionstagung date_created: 2022-12-21T14:39:52Z date_updated: 2022-12-21T14:41:30Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Vorteilhaftes Prozessverhalten von Wave-Schnecken type: conference user_id: '44116' year: '2022' ... --- _id: '34725' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Christian full_name: Held, Christian id: '40647' last_name: Held citation: ama: 'Moritzer E, Held C. Characterization of additively manufactured plastic components for direct screwing. In: ; 2022.' apa: Moritzer, E., & Held, C. (2022). Characterization of additively manufactured plastic components for direct screwing. 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo. bibtex: '@inproceedings{Moritzer_Held_2022, title={Characterization of additively manufactured plastic components for direct screwing}, author={Moritzer, Elmar and Held, Christian}, year={2022} }' chicago: Moritzer, Elmar, and Christian Held. “Characterization of Additively Manufactured Plastic Components for Direct Screwing,” 2022. ieee: E. Moritzer and C. Held, “Characterization of additively manufactured plastic components for direct screwing,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2022. mla: Moritzer, Elmar, and Christian Held. Characterization of Additively Manufactured Plastic Components for Direct Screwing. 2022. short: 'E. Moritzer, C. Held, in: 2022.' conference: location: Tokyo name: 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW) date_created: 2022-12-21T13:18:13Z date_updated: 2022-12-22T08:57:23Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Characterization of additively manufactured plastic components for direct screwing type: conference user_id: '44116' year: '2022' ... --- _id: '33291' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Dennis full_name: Rauen, Dennis id: '62033' last_name: Rauen citation: ama: Moritzer E, Rauen D. Plasmaaktivierung fehlgeschlagen! Kunststoffe. 2022:79-81. apa: Moritzer, E., & Rauen, D. (2022). Plasmaaktivierung fehlgeschlagen! Kunststoffe, 79–81. bibtex: '@article{Moritzer_Rauen_2022, title={Plasmaaktivierung fehlgeschlagen!}, journal={Kunststoffe}, author={Moritzer, Elmar and Rauen, Dennis}, year={2022}, pages={79–81} }' chicago: Moritzer, Elmar, and Dennis Rauen. “Plasmaaktivierung Fehlgeschlagen!” Kunststoffe, 2022. ieee: E. Moritzer and D. Rauen, “Plasmaaktivierung fehlgeschlagen!,” Kunststoffe, pp. 79–81, 2022. mla: Moritzer, Elmar, and Dennis Rauen. “Plasmaaktivierung Fehlgeschlagen!” Kunststoffe, 2022, pp. 79–81. short: E. Moritzer, D. Rauen, Kunststoffe (2022) 79–81. date_created: 2022-09-08T08:30:18Z date_updated: 2022-12-22T09:42:02Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng page: 79-81 publication: Kunststoffe publication_date: '2022' status: public title: Plasmaaktivierung fehlgeschlagen! type: newspaper_article user_id: '44116' year: '2022' ... --- _id: '35128' abstract: - lang: eng text: Here we demonstrate a new, to the best of our knowledge, type of 3-dB coupler that has an ultra-broadband operational range from 1300 to 1600 nm with low fabrication sensitivity. The overall device size is 800 µm including in/out S-bend waveguides. The coupler is an asymmetric non-uniform directional coupler that consists of two tapered waveguides. One of the coupler arms is shifted by 100 µm in the propagation direction, which results in a more wavelength-insensitive 3-dB response compared to a standard (not shifted) coupler. Moreover, compared to a long adiabatic coupler, we achieved a similar wavelength response at a 16-times-smaller device length. The couplers were fabricated using the silicon nitride platform of Lionix International. We also experimentally demonstrated an optical switch that is made by using two of these couplers in a Mach–Zehnder interferometer configuration. According to experimental results, this optical switch exhibits –10 dB of extinction ratio over the 1500–1600 nm wavelength range. Our results indicate that this new type of coupler holds great promise for various applications, including optical imaging, telecommunications, and reconfigurable photonic processors where compact, fabrication-tolerant, and wavelength-insensitive couplers are essential. author: - first_name: Hamed full_name: Nikbakht, Hamed last_name: Nikbakht - first_name: Mohammad Talebi full_name: Khoshmehr, Mohammad Talebi last_name: Khoshmehr - first_name: Bob full_name: van Someren, Bob last_name: van Someren - first_name: Dieter full_name: Teichrib, Dieter last_name: Teichrib - first_name: Manfred full_name: Hammer, Manfred id: '48077' last_name: Hammer orcid: 0000-0002-6331-9348 - first_name: Jens full_name: Förstner, Jens id: '158' last_name: Förstner orcid: 0000-0001-7059-9862 - first_name: B. Imran full_name: Akca, B. Imran last_name: Akca citation: ama: Nikbakht H, Khoshmehr MT, van Someren B, et al. Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint. Optics Letters. 2022;48(2):207. doi:10.1364/ol.476537 apa: Nikbakht, H., Khoshmehr, M. T., van Someren, B., Teichrib, D., Hammer, M., Förstner, J., & Akca, B. I. (2022). Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint. Optics Letters, 48(2), 207. https://doi.org/10.1364/ol.476537 bibtex: '@article{Nikbakht_Khoshmehr_van Someren_Teichrib_Hammer_Förstner_Akca_2022, title={Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint}, volume={48}, DOI={10.1364/ol.476537}, number={2}, journal={Optics Letters}, publisher={Optica Publishing Group}, author={Nikbakht, Hamed and Khoshmehr, Mohammad Talebi and van Someren, Bob and Teichrib, Dieter and Hammer, Manfred and Förstner, Jens and Akca, B. Imran}, year={2022}, pages={207} }' chicago: 'Nikbakht, Hamed, Mohammad Talebi Khoshmehr, Bob van Someren, Dieter Teichrib, Manfred Hammer, Jens Förstner, and B. Imran Akca. “Asymmetric, Non-Uniform 3-DB Directional Coupler with 300-Nm Bandwidth and a Small Footprint.” Optics Letters 48, no. 2 (2022): 207. https://doi.org/10.1364/ol.476537.' ieee: 'H. Nikbakht et al., “Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint,” Optics Letters, vol. 48, no. 2, p. 207, 2022, doi: 10.1364/ol.476537.' mla: Nikbakht, Hamed, et al. “Asymmetric, Non-Uniform 3-DB Directional Coupler with 300-Nm Bandwidth and a Small Footprint.” Optics Letters, vol. 48, no. 2, Optica Publishing Group, 2022, p. 207, doi:10.1364/ol.476537. short: H. Nikbakht, M.T. Khoshmehr, B. van Someren, D. Teichrib, M. Hammer, J. Förstner, B.I. Akca, Optics Letters 48 (2022) 207. date_created: 2023-01-03T09:32:47Z date_updated: 2023-01-03T10:37:34Z ddc: - '530' department: - _id: '61' - _id: '230' doi: 10.1364/ol.476537 file: - access_level: local content_type: application/pdf creator: fossie date_created: 2023-01-03T09:36:34Z date_updated: 2023-01-03T09:36:34Z embargo: 2024-01-03 embargo_to: open_access file_id: '35129' file_name: 2023-01 Nikbakht - Optics Letter - Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and small footprint.pdf file_size: 3731864 relation: main_file file_date_updated: 2023-01-03T09:36:34Z has_accepted_license: '1' intvolume: ' 48' issue: '2' keyword: - tet_topic_waveguide language: - iso: eng page: '207' publication: Optics Letters publication_identifier: issn: - 0146-9592 - 1539-4794 publication_status: published publisher: Optica Publishing Group status: public title: Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint type: journal_article user_id: '158' volume: 48 year: '2022' ... --- _id: '34744' author: - first_name: Matthias full_name: Hopp, Matthias id: '13142' last_name: Hopp - first_name: Leon full_name: Schäffer, Leon id: '57116' last_name: Schäffer citation: ama: 'Hopp M, Schäffer L. Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process. In: ; 2022.' apa: Hopp, M., & Schäffer, L. (2022). Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process. 37th International Conference of the Polymer Processing Society (PPS), Fukuoka. bibtex: '@inproceedings{Hopp_Schäffer_2022, title={Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process}, author={Hopp, Matthias and Schäffer, Leon}, year={2022} }' chicago: Hopp, Matthias, and Leon Schäffer. “Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,” 2022. ieee: M. Hopp and L. Schäffer, “Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022. mla: Hopp, Matthias, and Leon Schäffer. Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process. 2022. short: 'M. Hopp, L. Schäffer, in: 2022.' conference: location: Fukuoka name: 37th International Conference of the Polymer Processing Society (PPS) date_created: 2022-12-21T14:35:39Z date_updated: 2023-01-03T12:32:16Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng status: public title: Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process type: conference user_id: '44116' year: '2022' ... --- _id: '33287' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Christian full_name: Held, Christian id: '40647' last_name: Held - first_name: Johannes full_name: Hillemeyer, Johannes id: '27285' last_name: Hillemeyer citation: ama: Moritzer E, Held C, Hillemeyer J. Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS. Joining Plastic. 2022:84-90. apa: Moritzer, E., Held, C., & Hillemeyer, J. (2022). Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS. Joining Plastic, 84–90. bibtex: '@article{Moritzer_Held_Hillemeyer_2022, title={Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS}, journal={Joining Plastic}, author={Moritzer, Elmar and Held, Christian and Hillemeyer, Johannes}, year={2022}, pages={84–90} }' chicago: Moritzer, Elmar, Christian Held, and Johannes Hillemeyer. “Dimensionierung Und Optimierung von Im FDM-Verfahren 3D-Gedruckten Direktverschraubungen Aus ABS.” Joining Plastic, 2022. ieee: E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining Plastic, pp. 84–90, 2022. mla: Moritzer, Elmar, et al. “Dimensionierung Und Optimierung von Im FDM-Verfahren 3D-Gedruckten Direktverschraubungen Aus ABS.” Joining Plastic, 2022, pp. 84–90. short: E. Moritzer, C. Held, J. Hillemeyer, Joining Plastic (2022) 84–90. date_created: 2022-09-08T08:21:36Z date_updated: 2023-01-03T12:34:34Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng page: 84-90 publication: Joining Plastic publication_date: '2022' publication_identifier: issn: - 1864-3450 status: public title: Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS type: newspaper_article user_id: '44116' year: '2022' ... --- _id: '33289' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Christian full_name: Held, Christian id: '40647' last_name: Held - first_name: C. full_name: Hopmann, C. last_name: Hopmann - first_name: M. full_name: Kramer, M. last_name: Kramer citation: ama: Moritzer E, Held C, Hopmann C, Kramer M. Mit der richtigen Auslegung zur sicheren Verbindung. Kunststoffe. 2022:30-33. apa: Moritzer, E., Held, C., Hopmann, C., & Kramer, M. (2022). Mit der richtigen Auslegung zur sicheren Verbindung. Kunststoffe, 30–33. bibtex: '@article{Moritzer_Held_Hopmann_Kramer_2022, title={Mit der richtigen Auslegung zur sicheren Verbindung}, journal={Kunststoffe}, author={Moritzer, Elmar and Held, Christian and Hopmann, C. and Kramer, M.}, year={2022}, pages={30–33} }' chicago: Moritzer, Elmar, Christian Held, C. Hopmann, and M. Kramer. “Mit Der Richtigen Auslegung Zur Sicheren Verbindung.” Kunststoffe, 2022. ieee: E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022. mla: Moritzer, Elmar, et al. “Mit Der Richtigen Auslegung Zur Sicheren Verbindung.” Kunststoffe, 2022, pp. 30–33. short: E. Moritzer, C. Held, C. Hopmann, M. Kramer, Kunststoffe (2022) 30–33. date_created: 2022-09-08T08:25:32Z date_updated: 2023-01-03T12:33:54Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng page: 30-33 publication: Kunststoffe publication_date: '2022' publication_identifier: issn: - 0023-5563 status: public title: Mit der richtigen Auslegung zur sicheren Verbindung type: newspaper_article user_id: '44116' year: '2022' ... --- _id: '35306' author: - first_name: Yannick full_name: Guedes Bonthonneau, Yannick last_name: Guedes Bonthonneau - first_name: Tobias full_name: Weich, Tobias id: '49178' last_name: Weich orcid: 0000-0002-9648-6919 citation: ama: Guedes Bonthonneau Y, Weich T. Ruelle–Pollicott resonances for manifolds with hyperbolic cusps. Journal of the European Mathematical Society. 2022;24(3):851-923. doi:10.4171/jems/1103 apa: Guedes Bonthonneau, Y., & Weich, T. (2022). Ruelle–Pollicott resonances for manifolds with hyperbolic cusps. Journal of the European Mathematical Society, 24(3), 851–923. https://doi.org/10.4171/jems/1103 bibtex: '@article{Guedes Bonthonneau_Weich_2022, title={Ruelle–Pollicott resonances for manifolds with hyperbolic cusps}, volume={24}, DOI={10.4171/jems/1103}, number={3}, journal={Journal of the European Mathematical Society}, publisher={European Mathematical Society - EMS - Publishing House GmbH}, author={Guedes Bonthonneau, Yannick and Weich, Tobias}, year={2022}, pages={851–923} }' chicago: 'Guedes Bonthonneau, Yannick, and Tobias Weich. “Ruelle–Pollicott Resonances for Manifolds with Hyperbolic Cusps.” Journal of the European Mathematical Society 24, no. 3 (2022): 851–923. https://doi.org/10.4171/jems/1103.' ieee: 'Y. Guedes Bonthonneau and T. Weich, “Ruelle–Pollicott resonances for manifolds with hyperbolic cusps,” Journal of the European Mathematical Society, vol. 24, no. 3, pp. 851–923, 2022, doi: 10.4171/jems/1103.' mla: Guedes Bonthonneau, Yannick, and Tobias Weich. “Ruelle–Pollicott Resonances for Manifolds with Hyperbolic Cusps.” Journal of the European Mathematical Society, vol. 24, no. 3, European Mathematical Society - EMS - Publishing House GmbH, 2022, pp. 851–923, doi:10.4171/jems/1103. short: Y. Guedes Bonthonneau, T. Weich, Journal of the European Mathematical Society 24 (2022) 851–923. date_created: 2023-01-05T16:23:34Z date_updated: 2023-01-06T08:47:35Z department: - _id: '10' - _id: '623' - _id: '548' doi: 10.4171/jems/1103 intvolume: ' 24' issue: '3' keyword: - Applied Mathematics - General Mathematics language: - iso: eng page: 851-923 publication: Journal of the European Mathematical Society publication_identifier: issn: - 1435-9855 publication_status: published publisher: European Mathematical Society - EMS - Publishing House GmbH status: public title: Ruelle–Pollicott resonances for manifolds with hyperbolic cusps type: journal_article user_id: '49178' volume: 24 year: '2022' ... --- _id: '33862' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Christine full_name: Driediger, Christine last_name: Driediger citation: ama: Moritzer E, Driediger C. Reactive Direct Bonding of Digital Light Process Components. Macromolecular Symposia. 2022;404(1). doi:https://doi.org/10.1002/masy.202100396 apa: Moritzer, E., & Driediger, C. (2022). Reactive Direct Bonding of Digital Light Process Components. Macromolecular Symposia, 404(1). https://doi.org/10.1002/masy.202100396 bibtex: '@article{Moritzer_Driediger_2022, title={Reactive Direct Bonding of Digital Light Process Components}, volume={404}, DOI={https://doi.org/10.1002/masy.202100396}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Driediger, Christine}, year={2022} }' chicago: Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.” Macromolecular Symposia 404, no. 1 (2022). https://doi.org/10.1002/masy.202100396. ieee: 'E. Moritzer and C. Driediger, “Reactive Direct Bonding of Digital Light Process Components,” Macromolecular Symposia, vol. 404, no. 1, 2022, doi: https://doi.org/10.1002/masy.202100396.' mla: Moritzer, Elmar, and Christine Driediger. “Reactive Direct Bonding of Digital Light Process Components.” Macromolecular Symposia, vol. 404, no. 1, Wiley, 2022, doi:https://doi.org/10.1002/masy.202100396. short: E. Moritzer, C. Driediger, Macromolecular Symposia 404 (2022). conference: location: Bukarest name: 5th International Conference Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM) date_created: 2022-10-21T14:41:28Z date_updated: 2023-01-09T14:32:01Z department: - _id: '219' - _id: '624' - _id: '367' - _id: '321' - _id: '9' doi: https://doi.org/10.1002/masy.202100396 intvolume: ' 404' issue: '1' language: - iso: eng publication: Macromolecular Symposia publication_status: published publisher: Wiley status: public title: Reactive Direct Bonding of Digital Light Process Components type: journal_article user_id: '70729' volume: 404 year: '2022' ... --- _id: '30202' abstract: - lang: eng text: Die Arbeit mit Videografien eigenen Unterrichts wird in Praxisphasen in der universitären Lehramtsausbildung zunehmend als methodisches Mittel zur Reflexion von Unterrichtserfahrungen genutzt. Als wesentlicher Einflussfaktor für einen erfolgreichen Einsatz werden dabei die begleitenden Emotionen der Studierenden angenommen. In einer längsschnittlichen Interviewstudie wurden daher die emotionalen Prozesse von 20 Lehramtsstudierenden bei der Arbeit mit Eigenvideografien in Begleitveranstaltungen des Praxissemesters untersucht. Dabei konnten drei Typen rekonstruiert werden, die prototypische emotionale Muster im Praxissemesterverlauf beschreiben, die durch die Valenz emotionaler Zustände bezüglich der Eigenvideografie zu Beginn und Ende des Praxissemesters charakterisiert werden können (negativ-positiv, positiv-positiv, negativ-negativ). Bei fallübergreifender Betrachtung konnten zudem zentrale Zusammenhänge zwischen Emotionen und Merkmalen des Videoeinsatzes identifiziert werden, wie die Vertrautheit mit Mitstudierenden, der Prozess der Aufnahmegenehmigung und Vorerfahrungen mit Eigenvideografie. Die Ergebnisse der Studie können zur Vermeidung intensiver negativer Emotionen bei der Nutzung videobasierter Reflexion eigenen Unterrichts beitragen und die Akzeptanz von Eigenvideografie zur eigenen Professionalisierung in der Lehrerbildung erhöhen. author: - first_name: Pascal full_name: Pollmeier, Pascal id: '44191' last_name: Pollmeier - first_name: Tim full_name: Rogge, Tim last_name: Rogge - first_name: Christoph full_name: Vogelsang, Christoph id: '4245' last_name: Vogelsang citation: ama: Pollmeier P, Rogge T, Vogelsang C. Emotionale Erfahrungen von Lehramtsstudierenden bei der Arbeit mit Eigenvideografien von Unterricht – Fallanalysen aus einer längsschnittlichen Interviewstudie im Praxissemester. ZeHf – Zeitschrift für empirische Hochschulforschung. 2022;5(1):20-37. doi:10.3224/zehf.v5i1.03 apa: Pollmeier, P., Rogge, T., & Vogelsang, C. (2022). Emotionale Erfahrungen von Lehramtsstudierenden bei der Arbeit mit Eigenvideografien von Unterricht – Fallanalysen aus einer längsschnittlichen Interviewstudie im Praxissemester. ZeHf – Zeitschrift Für Empirische Hochschulforschung, 5(1), 20–37. https://doi.org/10.3224/zehf.v5i1.03 bibtex: '@article{Pollmeier_Rogge_Vogelsang_2022, title={Emotionale Erfahrungen von Lehramtsstudierenden bei der Arbeit mit Eigenvideografien von Unterricht – Fallanalysen aus einer längsschnittlichen Interviewstudie im Praxissemester}, volume={5}, DOI={10.3224/zehf.v5i1.03}, number={1}, journal={ZeHf – Zeitschrift für empirische Hochschulforschung}, publisher={Verlag Barbara Budrich GmbH}, author={Pollmeier, Pascal and Rogge, Tim and Vogelsang, Christoph}, year={2022}, pages={20–37} }' chicago: 'Pollmeier, Pascal, Tim Rogge, and Christoph Vogelsang. “Emotionale Erfahrungen von Lehramtsstudierenden Bei Der Arbeit Mit Eigenvideografien von Unterricht – Fallanalysen Aus Einer Längsschnittlichen Interviewstudie Im Praxissemester.” ZeHf – Zeitschrift Für Empirische Hochschulforschung 5, no. 1 (2022): 20–37. https://doi.org/10.3224/zehf.v5i1.03.' ieee: 'P. Pollmeier, T. Rogge, and C. Vogelsang, “Emotionale Erfahrungen von Lehramtsstudierenden bei der Arbeit mit Eigenvideografien von Unterricht – Fallanalysen aus einer längsschnittlichen Interviewstudie im Praxissemester,” ZeHf – Zeitschrift für empirische Hochschulforschung, vol. 5, no. 1, pp. 20–37, 2022, doi: 10.3224/zehf.v5i1.03.' mla: Pollmeier, Pascal, et al. “Emotionale Erfahrungen von Lehramtsstudierenden Bei Der Arbeit Mit Eigenvideografien von Unterricht – Fallanalysen Aus Einer Längsschnittlichen Interviewstudie Im Praxissemester.” ZeHf – Zeitschrift Für Empirische Hochschulforschung, vol. 5, no. 1, Verlag Barbara Budrich GmbH, 2022, pp. 20–37, doi:10.3224/zehf.v5i1.03. short: P. Pollmeier, T. Rogge, C. Vogelsang, ZeHf – Zeitschrift Für Empirische Hochschulforschung 5 (2022) 20–37. date_created: 2022-03-03T13:32:50Z date_updated: 2023-01-09T15:11:26Z department: - _id: '33' - _id: '386' doi: 10.3224/zehf.v5i1.03 intvolume: ' 5' issue: '1' language: - iso: eng page: 20-37 publication: ZeHf – Zeitschrift für empirische Hochschulforschung publication_identifier: issn: - 2367-3044 - 2367-3052 publication_status: published publisher: Verlag Barbara Budrich GmbH status: public title: Emotionale Erfahrungen von Lehramtsstudierenden bei der Arbeit mit Eigenvideografien von Unterricht – Fallanalysen aus einer längsschnittlichen Interviewstudie im Praxissemester type: journal_article user_id: '4245' volume: 5 year: '2022' ... --- _id: '34639' author: - first_name: Christoph full_name: Vogelsang, Christoph id: '4245' last_name: Vogelsang - first_name: Christoph full_name: Wiethoff, Christoph id: '585' last_name: Wiethoff citation: ama: Vogelsang C, Wiethoff C. Effects of school closures during the COVID-19 pandemic in early 2020 on prospective teachers in a one-semester school internship. European Journal of Teacher Education. Published online 2022:1-19. doi:10.1080/02619768.2022.2158808 apa: Vogelsang, C., & Wiethoff, C. (2022). Effects of school closures during the COVID-19 pandemic in early 2020 on prospective teachers in a one-semester school internship. European Journal of Teacher Education, 1–19. https://doi.org/10.1080/02619768.2022.2158808 bibtex: '@article{Vogelsang_Wiethoff_2022, title={Effects of school closures during the COVID-19 pandemic in early 2020 on prospective teachers in a one-semester school internship}, DOI={10.1080/02619768.2022.2158808}, journal={European Journal of Teacher Education}, publisher={Informa UK Limited}, author={Vogelsang, Christoph and Wiethoff, Christoph}, year={2022}, pages={1–19} }' chicago: Vogelsang, Christoph, and Christoph Wiethoff. “Effects of School Closures during the COVID-19 Pandemic in Early 2020 on Prospective Teachers in a One-Semester School Internship.” European Journal of Teacher Education, 2022, 1–19. https://doi.org/10.1080/02619768.2022.2158808. ieee: 'C. Vogelsang and C. Wiethoff, “Effects of school closures during the COVID-19 pandemic in early 2020 on prospective teachers in a one-semester school internship,” European Journal of Teacher Education, pp. 1–19, 2022, doi: 10.1080/02619768.2022.2158808.' mla: Vogelsang, Christoph, and Christoph Wiethoff. “Effects of School Closures during the COVID-19 Pandemic in Early 2020 on Prospective Teachers in a One-Semester School Internship.” European Journal of Teacher Education, Informa UK Limited, 2022, pp. 1–19, doi:10.1080/02619768.2022.2158808. short: C. Vogelsang, C. Wiethoff, European Journal of Teacher Education (2022) 1–19. date_created: 2022-12-20T20:44:14Z date_updated: 2023-01-09T15:10:53Z department: - _id: '33' doi: 10.1080/02619768.2022.2158808 keyword: - Education language: - iso: eng page: 1-19 publication: European Journal of Teacher Education publication_identifier: issn: - 0261-9768 - 1469-5928 publication_status: published publisher: Informa UK Limited status: public title: Effects of school closures during the COVID-19 pandemic in early 2020 on prospective teachers in a one-semester school internship type: journal_article user_id: '4245' year: '2022' ...