---
_id: '64158'
abstract:
- lang: eng
text: "ABSTRACT\r\n \r\n Electrification
offers a promising route to reduce CO\r\n 2\r\n
\ emissions in the chemical sector. In distillation, heat pump
integration such as mechanical vapor recompression (MVR) can replace fossil‐based
utilities, but column parameters like pressure drop should be accurately considered
when assessing integration potential. This work discusses the effect of feed preheating
and column pressure drop on MVR integration potential. The two binary separation
tasks, methanol–water and benzene–toluene, are analyzed to identify energetically
optimal preheater and MVR design. In addition, MVR integration in a bioethanol
vacuum distillation sequence is evaluated for utility demand, CO\r\n 2\r\n
\ emissions, and economic feasibility under varying pressure
drops, preheating configurations, and cost and emission scenarios.\r\n "
article_number: cite.70074
author:
- first_name: Thorben
full_name: Hochhaus, Thorben
last_name: Hochhaus
- first_name: Sebastian
full_name: Siepmann, Sebastian
last_name: Siepmann
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Hochhaus T, Siepmann S, Grünewald M, Riese J. Impact of Distillation Column
Design on Potential for the Integration of Mechanical Vapor Recompression. Chemie
Ingenieur Technik. Published online 2026. doi:10.1002/cite.70074
apa: Hochhaus, T., Siepmann, S., Grünewald, M., & Riese, J. (2026). Impact of
Distillation Column Design on Potential for the Integration of Mechanical Vapor
Recompression. Chemie Ingenieur Technik, Article cite. 70074. https://doi.org/10.1002/cite.70074
bibtex: '@article{Hochhaus_Siepmann_Grünewald_Riese_2026, title={Impact of Distillation
Column Design on Potential for the Integration of Mechanical Vapor Recompression},
DOI={10.1002/cite.70074}, number={cite.
70074}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Hochhaus,
Thorben and Siepmann, Sebastian and Grünewald, Marcus and Riese, Julia}, year={2026}
}'
chicago: Hochhaus, Thorben, Sebastian Siepmann, Marcus Grünewald, and Julia Riese.
“Impact of Distillation Column Design on Potential for the Integration of Mechanical
Vapor Recompression.” Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70074.
ieee: 'T. Hochhaus, S. Siepmann, M. Grünewald, and J. Riese, “Impact of Distillation
Column Design on Potential for the Integration of Mechanical Vapor Recompression,”
Chemie Ingenieur Technik, Art. no. cite. 70074, 2026, doi: 10.1002/cite.70074.'
mla: Hochhaus, Thorben, et al. “Impact of Distillation Column Design on Potential
for the Integration of Mechanical Vapor Recompression.” Chemie Ingenieur Technik,
cite. 70074, Wiley, 2026, doi:10.1002/cite.70074.
short: T. Hochhaus, S. Siepmann, M. Grünewald, J. Riese, Chemie Ingenieur Technik
(2026).
date_created: 2026-02-16T07:31:17Z
date_updated: 2026-02-16T07:32:07Z
department:
- _id: '831'
doi: 10.1002/cite.70074
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Impact of Distillation Column Design on Potential for the Integration of Mechanical
Vapor Recompression
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '64159'
abstract:
- lang: eng
text: "ABSTRACT\r\n Separation
processes, such as distillation and stripping, are highly energy‐intensive. Typically,
energy is supplied indirectly via a reboiler, which is often associated with heat
losses. We present a preliminary theoretical evaluation of a novel concept to
supply energy directly inside the column using heatable structured packings. These
packings can be produced by multi‐material 3D printing, resulting in a conductive
inner layer and an insulating outer layer. Functioning as electric resistance
heaters, these packings serve as heating elements. In this numerical study, we
compared different scenarios of energy supply along the height of the column,
including uniform distribution, applying a temperature profile, and using or omitting
a reboiler."
article_number: e70076
article_type: original
author:
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Sascha
full_name: Brüne, Sascha
last_name: Brüne
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Lutters N, Brüne S, Riese J. Preliminary Numerical Evaluation of Directly Heated
Structured Packings to be Used for Separation Processes. Chemie Ingenieur Technik.
Published online 2026. doi:10.1002/cite.70076
apa: Lutters, N., Brüne, S., & Riese, J. (2026). Preliminary Numerical Evaluation
of Directly Heated Structured Packings to be Used for Separation Processes. Chemie
Ingenieur Technik, Article e70076. https://doi.org/10.1002/cite.70076
bibtex: '@article{Lutters_Brüne_Riese_2026, title={Preliminary Numerical Evaluation
of Directly Heated Structured Packings to be Used for Separation Processes}, DOI={10.1002/cite.70076}, number={e70076},
journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Lutters, Nicole
and Brüne, Sascha and Riese, Julia}, year={2026} }'
chicago: Lutters, Nicole, Sascha Brüne, and Julia Riese. “Preliminary Numerical
Evaluation of Directly Heated Structured Packings to Be Used for Separation Processes.”
Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70076.
ieee: 'N. Lutters, S. Brüne, and J. Riese, “Preliminary Numerical Evaluation of
Directly Heated Structured Packings to be Used for Separation Processes,” Chemie
Ingenieur Technik, Art. no. e70076, 2026, doi: 10.1002/cite.70076.'
mla: Lutters, Nicole, et al. “Preliminary Numerical Evaluation of Directly Heated
Structured Packings to Be Used for Separation Processes.” Chemie Ingenieur
Technik, e70076, Wiley, 2026, doi:10.1002/cite.70076.
short: N. Lutters, S. Brüne, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-02-16T07:56:53Z
date_updated: 2026-02-23T06:59:41Z
department:
- _id: '831'
doi: 10.1002/cite.70076
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Preliminary Numerical Evaluation of Directly Heated Structured Packings to
be Used for Separation Processes
type: journal_article
user_id: '22006'
year: '2026'
...
---
_id: '64876'
abstract:
- lang: eng
text: "ABSTRACT\r\n This study
shows the applicability of ultrasonic sensors for measuring two‐phase layer heights
in sieve tray columns under dynamic operating conditions. Although these sensors
are known for their precision in stationary systems, their reliability under fluctuating
flow conditions has remained unclear. To validate their accuracy, ultrasonic measurements
were compared with both automated image analysis via a Python algorithm and manual
video evaluation. Results show that ultrasonic sensors maintain high precision
at moderate gas loads and with small hole diameters. Increased gas loads and turbulence,
however, reduced measurement accuracy due to signal scattering. The findings highlight
the potential of ultrasonic sensing for real‐time, noninvasive monitoring in dynamic
multiphase systems."
article_number: e70087
author:
- first_name: Niklas
full_name: Breuer, Niklas
last_name: Breuer
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Breuer N, Grünewald M, Riese J. Application of Ultrasonic Sensors for Determining
the Height of Dynamic Two‐Phase Layers in Tray Columns. Chemie Ingenieur Technik.
Published online 2026. doi:10.1002/cite.70087
apa: Breuer, N., Grünewald, M., & Riese, J. (2026). Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns.
Chemie Ingenieur Technik, Article e70087. https://doi.org/10.1002/cite.70087
bibtex: '@article{Breuer_Grünewald_Riese_2026, title={Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns},
DOI={10.1002/cite.70087}, number={e70087},
journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Breuer, Niklas
and Grünewald, Marcus and Riese, Julia}, year={2026} }'
chicago: Breuer, Niklas, Marcus Grünewald, and Julia Riese. “Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns.”
Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70087.
ieee: 'N. Breuer, M. Grünewald, and J. Riese, “Application of Ultrasonic Sensors
for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns,” Chemie
Ingenieur Technik, Art. no. e70087, 2026, doi: 10.1002/cite.70087.'
mla: Breuer, Niklas, et al. “Application of Ultrasonic Sensors for Determining the
Height of Dynamic Two‐Phase Layers in Tray Columns.” Chemie Ingenieur Technik,
e70087, Wiley, 2026, doi:10.1002/cite.70087.
short: N. Breuer, M. Grünewald, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-03-10T15:01:19Z
date_updated: 2026-03-10T15:01:55Z
department:
- _id: '831'
doi: 10.1002/cite.70087
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Application of Ultrasonic Sensors for Determining the Height of Dynamic Two‐Phase
Layers in Tray Columns
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '65267'
author:
- first_name: Viola
full_name: Hollenhorst, Viola
id: '50519'
last_name: Hollenhorst
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Hollenhorst V, Riese J, Kenig EY. Investigation of Surface Roughness Effects
on Flow Patterns and Thermal Performance in Additively Manufactured Channels.
In: ; 2026.'
apa: Hollenhorst, V., Riese, J., & Kenig, E. Y. (2026). Investigation of
Surface Roughness Effects on Flow Patterns and Thermal Performance in Additively
Manufactured Channels. Annual Meeting of the DECHEMA/VDI Specialist Groups
Fluid Separations and Heat & Mass Transfer, Luzern, Schweiz.
bibtex: '@inproceedings{Hollenhorst_Riese_Kenig_2026, title={Investigation of Surface
Roughness Effects on Flow Patterns and Thermal Performance in Additively Manufactured
Channels}, author={Hollenhorst, Viola and Riese, Julia and Kenig, Eugeny Y.},
year={2026} }'
chicago: Hollenhorst, Viola, Julia Riese, and Eugeny Y. Kenig. “Investigation of
Surface Roughness Effects on Flow Patterns and Thermal Performance in Additively
Manufactured Channels,” 2026.
ieee: V. Hollenhorst, J. Riese, and E. Y. Kenig, “Investigation of Surface Roughness
Effects on Flow Patterns and Thermal Performance in Additively Manufactured Channels,”
presented at the Annual Meeting of the DECHEMA/VDI Specialist Groups Fluid Separations
and Heat & Mass Transfer, Luzern, Schweiz, 2026.
mla: Hollenhorst, Viola, et al. Investigation of Surface Roughness Effects on
Flow Patterns and Thermal Performance in Additively Manufactured Channels.
2026.
short: 'V. Hollenhorst, J. Riese, E.Y. Kenig, in: 2026.'
conference:
end_date: 2026-03-11
location: Luzern, Schweiz
name: Annual Meeting of the DECHEMA/VDI Specialist Groups Fluid Separations and
Heat & Mass Transfer
start_date: 2026-03-09
date_created: 2026-04-01T06:44:05Z
date_updated: 2026-04-01T06:56:44Z
department:
- _id: '9'
- _id: '831'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Investigation of Surface Roughness Effects on Flow Patterns and Thermal Performance
in Additively Manufactured Channels
type: conference_abstract
user_id: '50519'
year: '2026'
...
---
_id: '58539'
author:
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Uwe
full_name: Hampel, Uwe
last_name: Hampel
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Franke P, Schubert M, Hampel U, Kenig EY. Modeling reactive absorption in
sandwich packings. In: Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025. ; 2025.'
apa: Franke, P., Schubert, M., Hampel, U., & Kenig, E. Y. (2025). Modeling reactive
absorption in sandwich packings. Proceedings of the Dechema/VDI Jahrestreffen
Fluidverfahrenstechnik 2025. Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025, Bochum.
bibtex: '@inproceedings{Franke_Schubert_Hampel_Kenig_2025, title={Modeling reactive
absorption in sandwich packings}, booktitle={Proceedings of the Dechema/VDI Jahrestreffen
Fluidverfahrenstechnik 2025}, author={Franke, Patrick and Schubert, Markus and
Hampel, Uwe and Kenig, Eugeny Y.}, year={2025} }'
chicago: Franke, Patrick, Markus Schubert, Uwe Hampel, and Eugeny Y. Kenig. “Modeling
Reactive Absorption in Sandwich Packings.” In Proceedings of the Dechema/VDI
Jahrestreffen Fluidverfahrenstechnik 2025, 2025.
ieee: P. Franke, M. Schubert, U. Hampel, and E. Y. Kenig, “Modeling reactive absorption
in sandwich packings,” presented at the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025, Bochum, 2025.
mla: Franke, Patrick, et al. “Modeling Reactive Absorption in Sandwich Packings.”
Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025,
2025.
short: 'P. Franke, M. Schubert, U. Hampel, E.Y. Kenig, in: Proceedings of the Dechema/VDI
Jahrestreffen Fluidverfahrenstechnik 2025, 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025
start_date: 2025-02-03
date_created: 2025-02-07T11:34:54Z
date_updated: 2025-02-07T11:35:07Z
ddc:
- '620'
department:
- _id: '831'
file:
- access_level: closed
content_type: application/pdf
creator: frankep
date_created: 2025-02-07T11:33:55Z
date_updated: 2025-02-07T11:33:55Z
file_id: '58540'
file_name: FVT2025_Abstract_Franke.pdf
file_size: 154922
relation: main_file
success: 1
file_date_updated: 2025-02-07T11:33:55Z
has_accepted_license: '1'
language:
- iso: eng
publication: Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025
status: public
title: Modeling reactive absorption in sandwich packings
type: conference_abstract
user_id: '93922'
year: '2025'
...
---
_id: '58672'
article_number: '103960'
author:
- first_name: Mohamad
full_name: Al Trjman, Mohamad
id: '65415'
last_name: Al Trjman
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
orcid: 0000-0003-3069-9601
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Al Trjman M, Salten AHJ, Beule F, et al. Viscous fingering in adhesive bonding.
International Journal of Adhesion and Adhesives. 2025;139. doi:10.1016/j.ijadhadh.2025.103960
apa: Al Trjman, M., Salten, A. H. J., Beule, F., Teutenberg, D., Meschut, G., Riese,
J., & Kenig, E. (2025). Viscous fingering in adhesive bonding. International
Journal of Adhesion and Adhesives, 139, Article 103960. https://doi.org/10.1016/j.ijadhadh.2025.103960
bibtex: '@article{Al Trjman_Salten_Beule_Teutenberg_Meschut_Riese_Kenig_2025, title={Viscous
fingering in adhesive bonding}, volume={139}, DOI={10.1016/j.ijadhadh.2025.103960},
number={103960}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Al Trjman, Mohamad and Salten, Alexander Heinrich Johannes and Beule,
Felix and Teutenberg, Dominik and Meschut, Gerson and Riese, Julia and Kenig,
Eugeny}, year={2025} }'
chicago: Al Trjman, Mohamad, Alexander Heinrich Johannes Salten, Felix Beule, Dominik
Teutenberg, Gerson Meschut, Julia Riese, and Eugeny Kenig. “Viscous Fingering
in Adhesive Bonding.” International Journal of Adhesion and Adhesives 139
(2025). https://doi.org/10.1016/j.ijadhadh.2025.103960.
ieee: 'M. Al Trjman et al., “Viscous fingering in adhesive bonding,” International
Journal of Adhesion and Adhesives, vol. 139, Art. no. 103960, 2025, doi: 10.1016/j.ijadhadh.2025.103960.'
mla: Al Trjman, Mohamad, et al. “Viscous Fingering in Adhesive Bonding.” International
Journal of Adhesion and Adhesives, vol. 139, 103960, Elsevier BV, 2025, doi:10.1016/j.ijadhadh.2025.103960.
short: M. Al Trjman, A.H.J. Salten, F. Beule, D. Teutenberg, G. Meschut, J. Riese,
E. Kenig, International Journal of Adhesion and Adhesives 139 (2025).
date_created: 2025-02-17T19:39:31Z
date_updated: 2025-02-21T12:10:51Z
department:
- _id: '9'
- _id: '831'
doi: 10.1016/j.ijadhadh.2025.103960
intvolume: ' 139'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Viscous fingering in adhesive bonding
type: journal_article
user_id: '101499'
volume: 139
year: '2025'
...
---
_id: '58759'
article_number: '121317'
author:
- first_name: Christopher
full_name: Dechert, Christopher
last_name: Dechert
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
last_name: Kenig
citation:
ama: 'Dechert C, Kenig EY. Influence of microstructures on liquid spreading on inclined
plates: A CFD based study. Chemical Engineering Science. Published online
2025. doi:10.1016/j.ces.2025.121317'
apa: 'Dechert, C., & Kenig, E. Y. (2025). Influence of microstructures on liquid
spreading on inclined plates: A CFD based study. Chemical Engineering Science,
Article 121317. https://doi.org/10.1016/j.ces.2025.121317'
bibtex: '@article{Dechert_Kenig_2025, title={Influence of microstructures on liquid
spreading on inclined plates: A CFD based study}, DOI={10.1016/j.ces.2025.121317},
number={121317}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Dechert, Christopher and Kenig, Eugeny Y.}, year={2025} }'
chicago: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures
on Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 2025. https://doi.org/10.1016/j.ces.2025.121317.'
ieee: 'C. Dechert and E. Y. Kenig, “Influence of microstructures on liquid spreading
on inclined plates: A CFD based study,” Chemical Engineering Science, Art.
no. 121317, 2025, doi: 10.1016/j.ces.2025.121317.'
mla: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures on
Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 121317, Elsevier BV, 2025, doi:10.1016/j.ces.2025.121317.'
short: C. Dechert, E.Y. Kenig, Chemical Engineering Science (2025).
date_created: 2025-02-21T12:23:00Z
date_updated: 2025-02-21T12:32:19Z
department:
- _id: '831'
doi: 10.1016/j.ces.2025.121317
extern: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://doi.org/10.1016/j.ces.2025.121317
status: public
title: 'Influence of microstructures on liquid spreading on inclined plates: A CFD
based study'
type: journal_article
user_id: '69828'
year: '2025'
...
---
_id: '58761'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
citation:
ama: 'Dechert C, Riese J, Franke P. Untersuchung zur Vergleichbarkeit von verschiedenen
Methoden zur Bestimmung der effektiven Phasengrenzflächen. In: ; 2025.'
apa: Dechert, C., Riese, J., & Franke, P. (2025). Untersuchung zur Vergleichbarkeit
von verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen.
Jahrestagung der Fachgruppe FLuidverfahrenstechnik, Bochum.
bibtex: '@inproceedings{Dechert_Riese_Franke_2025, title={Untersuchung zur Vergleichbarkeit
von verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen},
author={Dechert, Christopher and Riese, Julia and Franke, Patrick}, year={2025}
}'
chicago: Dechert, Christopher, Julia Riese, and Patrick Franke. “Untersuchung Zur
Vergleichbarkeit von Verschiedenen Methoden Zur Bestimmung Der Effektiven Phasengrenzflächen,”
2025.
ieee: C. Dechert, J. Riese, and P. Franke, “Untersuchung zur Vergleichbarkeit von
verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen,” presented
at the Jahrestagung der Fachgruppe FLuidverfahrenstechnik, Bochum, 2025.
mla: Dechert, Christopher, et al. Untersuchung Zur Vergleichbarkeit von Verschiedenen
Methoden Zur Bestimmung Der Effektiven Phasengrenzflächen. 2025.
short: 'C. Dechert, J. Riese, P. Franke, in: 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Jahrestagung der Fachgruppe FLuidverfahrenstechnik
start_date: 2025-02-03
date_created: 2025-02-21T12:36:20Z
date_updated: 2025-02-21T12:38:25Z
department:
- _id: '831'
extern: '1'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
status: public
title: Untersuchung zur Vergleichbarkeit von verschiedenen Methoden zur Bestimmung
der effektiven Phasengrenzflächen
type: conference_abstract
user_id: '69828'
year: '2025'
...
---
_id: '58762'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Dechert C, Riese J. Bewertung des Potentiales der Elektrobenetzung für Trennkolonnen.
In: ; 2025.'
apa: Dechert, C., & Riese, J. (2025). Bewertung des Potentiales der Elektrobenetzung
für Trennkolonnen. Jahrestreffen der Fachgruppe Fluidverfahrenstechnik, Bochum.
bibtex: '@inproceedings{Dechert_Riese_2025, title={Bewertung des Potentiales der
Elektrobenetzung für Trennkolonnen}, author={Dechert, Christopher and Riese, Julia},
year={2025} }'
chicago: Dechert, Christopher, and Julia Riese. “Bewertung Des Potentiales Der Elektrobenetzung
Für Trennkolonnen,” 2025.
ieee: C. Dechert and J. Riese, “Bewertung des Potentiales der Elektrobenetzung für
Trennkolonnen,” presented at the Jahrestreffen der Fachgruppe Fluidverfahrenstechnik,
Bochum, 2025.
mla: Dechert, Christopher, and Julia Riese. Bewertung Des Potentiales Der Elektrobenetzung
Für Trennkolonnen. 2025.
short: 'C. Dechert, J. Riese, in: 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Jahrestreffen der Fachgruppe Fluidverfahrenstechnik
start_date: 2025-02-03
date_created: 2025-02-21T12:38:03Z
date_updated: 2025-02-21T12:38:28Z
department:
- _id: '831'
language:
- iso: eng
status: public
title: Bewertung des Potentiales der Elektrobenetzung für Trennkolonnen
type: conference_abstract
user_id: '69828'
year: '2025'
...
---
_id: '58165'
article_number: '131436'
author:
- first_name: Maximilian
full_name: Neumann, Maximilian
last_name: Neumann
- first_name: Marc
full_name: Xia, Marc
last_name: Xia
- first_name: René
full_name: Pöschmann, René
last_name: Pöschmann
- first_name: Amelie
full_name: Merkel, Amelie
last_name: Merkel
- first_name: Rolf
full_name: Staud, Rolf
last_name: Staud
- first_name: Hannes
full_name: Schneider, Hannes
last_name: Schneider
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Jürgen
full_name: Paschold, Jürgen
last_name: Paschold
- first_name: Steffen
full_name: Müller, Steffen
last_name: Müller
- first_name: Laura-Selin
full_name: Harding, Laura-Selin
last_name: Harding
- first_name: Johannes
full_name: Neukäufer, Johannes
last_name: Neukäufer
- first_name: Christoph
full_name: Hiller, Christoph
last_name: Hiller
- first_name: Ilja
full_name: Ausner, Ilja
last_name: Ausner
- first_name: Ansor
full_name: Gäbler, Ansor
last_name: Gäbler
- first_name: Reiner
full_name: Chromik, Reiner
last_name: Chromik
- first_name: Jan
full_name: Maćkowiak, Jan
last_name: Maćkowiak
- first_name: Jerzy
full_name: Maćkowiak, Jerzy
last_name: Maćkowiak
- first_name: Jose Luis
full_name: Sola Cervera, Jose Luis
last_name: Sola Cervera
- first_name: Christian
full_name: Geipel, Christian
last_name: Geipel
- first_name: Jost
full_name: Brinkmann, Jost
last_name: Brinkmann
- first_name: Jürgen
full_name: Bausa, Jürgen
last_name: Bausa
- first_name: Sebastian
full_name: Zeck, Sebastian
last_name: Zeck
- first_name: Mark
full_name: Hapke, Mark
last_name: Hapke
- first_name: Florian
full_name: Forner, Florian
last_name: Forner
- first_name: Florian
full_name: Habla, Florian
last_name: Habla
- first_name: Manuel
full_name: Knaup, Manuel
last_name: Knaup
- first_name: Robin
full_name: Schulz, Robin
last_name: Schulz
- first_name: Michael
full_name: Schultes, Michael
last_name: Schultes
- first_name: Thomas
full_name: Harlacher, Thomas
last_name: Harlacher
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Katharina
full_name: Jasch, Katharina
last_name: Jasch
- first_name: Mandy
full_name: Paschetag, Mandy
last_name: Paschetag
- first_name: Stephan
full_name: Scholl, Stephan
last_name: Scholl
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Georg
full_name: Brösigke, Georg
last_name: Brösigke
- first_name: Jens-Uwe
full_name: Repke, Jens-Uwe
last_name: Repke
- first_name: Harald
full_name: Klein, Harald
last_name: Klein
- first_name: Sebastian
full_name: Rehfeldt, Sebastian
last_name: Rehfeldt
citation:
ama: 'Neumann M, Xia M, Pöschmann R, et al. Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology. 2025;361. doi:10.1016/j.seppur.2025.131436'
apa: 'Neumann, M., Xia, M., Pöschmann, R., Merkel, A., Staud, R., Schneider, H.,
Ehlert, T., Paschold, J., Müller, S., Harding, L.-S., Neukäufer, J., Hiller, C.,
Ausner, I., Gäbler, A., Chromik, R., Maćkowiak, J., Maćkowiak, J., Sola Cervera,
J. L., Geipel, C., … Rehfeldt, S. (2025). Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology, 361, Article 131436. https://doi.org/10.1016/j.seppur.2025.131436'
bibtex: '@article{Neumann_Xia_Pöschmann_Merkel_Staud_Schneider_Ehlert_Paschold_Müller_Harding_et
al._2025, title={Towards reliable HETP values: Lessons learned from standardized
separation efficiency measurements}, volume={361}, DOI={10.1016/j.seppur.2025.131436},
number={131436}, journal={Separation and Purification Technology}, publisher={Elsevier
BV}, author={Neumann, Maximilian and Xia, Marc and Pöschmann, René and Merkel,
Amelie and Staud, Rolf and Schneider, Hannes and Ehlert, Thomas and Paschold,
Jürgen and Müller, Steffen and Harding, Laura-Selin and et al.}, year={2025} }'
chicago: 'Neumann, Maximilian, Marc Xia, René Pöschmann, Amelie Merkel, Rolf Staud,
Hannes Schneider, Thomas Ehlert, et al. “Towards Reliable HETP Values: Lessons
Learned from Standardized Separation Efficiency Measurements.” Separation and
Purification Technology 361 (2025). https://doi.org/10.1016/j.seppur.2025.131436.'
ieee: 'M. Neumann et al., “Towards reliable HETP values: Lessons learned
from standardized separation efficiency measurements,” Separation and Purification
Technology, vol. 361, Art. no. 131436, 2025, doi: 10.1016/j.seppur.2025.131436.'
mla: 'Neumann, Maximilian, et al. “Towards Reliable HETP Values: Lessons Learned
from Standardized Separation Efficiency Measurements.” Separation and Purification
Technology, vol. 361, 131436, Elsevier BV, 2025, doi:10.1016/j.seppur.2025.131436.'
short: M. Neumann, M. Xia, R. Pöschmann, A. Merkel, R. Staud, H. Schneider, T. Ehlert,
J. Paschold, S. Müller, L.-S. Harding, J. Neukäufer, C. Hiller, I. Ausner, A.
Gäbler, R. Chromik, J. Maćkowiak, J. Maćkowiak, J.L. Sola Cervera, C. Geipel,
J. Brinkmann, J. Bausa, S. Zeck, M. Hapke, F. Forner, F. Habla, M. Knaup, R. Schulz,
M. Schultes, T. Harlacher, N. Lutters, E. Kenig, K. Jasch, M. Paschetag, S. Scholl,
M. Grünewald, G. Brösigke, J.-U. Repke, H. Klein, S. Rehfeldt, Separation and
Purification Technology 361 (2025).
date_created: 2025-01-13T11:35:51Z
date_updated: 2025-02-28T07:57:11Z
department:
- _id: '9'
- _id: '145'
- _id: '831'
doi: 10.1016/j.seppur.2025.131436
intvolume: ' 361'
language:
- iso: eng
publication: Separation and Purification Technology
publication_identifier:
issn:
- 1383-5866
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Towards reliable HETP values: Lessons learned from standardized separation
efficiency measurements'
type: journal_article
user_id: '22006'
volume: 361
year: '2025'
...
---
_id: '60494'
abstract:
- lang: eng
text: Pillow-plate heat exchangers (PPHEs) represent a viable alternative to conventional
shell-and-tube and plate heat exchangers. The waviness of their channels intensifies
fluid mixing in the boundary layers and facilitates heat transfer. Applying secondary
surface structuring can further enhance the overall thermo-hydraulic performance
of PPHEs, thus increasing their competitiveness against conventional heat exchangers.
In this work, streamlined secondary structures applied on the PPHE surface were
studied numerically to explore their potential in enhancing near-wall fluid mixing.
Computational fluid dynamics (CFD) simulations of single-phase turbulent flow
in the inner PPHE channel were performed and pressure drop, heat transfer coefficients,
and overall thermo-hydraulic efficiency were determined. The simulation results
clearly demonstrate a favourable influence of secondary structuring on the heat
transfer performance of PPHEs.
author:
- first_name: Reza
full_name: Afsahnoudeh, Reza
id: '90390'
last_name: Afsahnoudeh
orcid: https://orcid.org/0009-0001-3161-8036
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
last_name: Kenig
citation:
ama: 'Afsahnoudeh R, Riese J, Kenig EY. Thermo-Hydraulic Performance of Pillow-Plate
Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis. In:
Systems and Control Transactions. Vol 4. PSE Press; 2025. doi:10.69997/sct.178665'
apa: 'Afsahnoudeh, R., Riese, J., & Kenig, E. Y. (2025). Thermo-Hydraulic Performance
of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical
Analysis. Systems and Control Transactions, 4. https://doi.org/10.69997/sct.178665'
bibtex: '@inproceedings{Afsahnoudeh_Riese_Kenig_2025, title={Thermo-Hydraulic Performance
of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical
Analysis}, volume={4}, DOI={10.69997/sct.178665},
booktitle={Systems and Control Transactions}, publisher={PSE Press}, author={Afsahnoudeh,
Reza and Riese, Julia and Kenig, Eugeny Y.}, year={2025} }'
chicago: 'Afsahnoudeh, Reza, Julia Riese, and Eugeny Y. Kenig. “Thermo-Hydraulic
Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures:
A Numerical Analysis.” In Systems and Control Transactions, Vol. 4. PSE
Press, 2025. https://doi.org/10.69997/sct.178665.'
ieee: 'R. Afsahnoudeh, J. Riese, and E. Y. Kenig, “Thermo-Hydraulic Performance
of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical
Analysis,” in Systems and Control Transactions, 2025, vol. 4, doi: 10.69997/sct.178665.'
mla: 'Afsahnoudeh, Reza, et al. “Thermo-Hydraulic Performance of Pillow-Plate Heat
Exchangers with Streamlined Secondary Structures: A Numerical Analysis.” Systems
and Control Transactions, vol. 4, PSE Press, 2025, doi:10.69997/sct.178665.'
short: 'R. Afsahnoudeh, J. Riese, E.Y. Kenig, in: Systems and Control Transactions,
PSE Press, 2025.'
date_created: 2025-07-02T07:56:12Z
date_updated: 2025-07-02T07:57:08Z
department:
- _id: '831'
doi: 10.69997/sct.178665
intvolume: ' 4'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Systems and Control Transactions
publication_identifier:
issn:
- 2818-4734
publication_status: published
publisher: PSE Press
quality_controlled: '1'
status: public
title: 'Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined
Secondary Structures: A Numerical Analysis'
type: conference
user_id: '101499'
volume: 4
year: '2025'
...
---
_id: '60493'
abstract:
- lang: eng
text: Heat pumps play a crucial role in decarbonizing the chemical industry. The
integration and sizing of heat pumps in chemical processes is a challenging task
in multi-product chemical processes due to the fluctuating waste heat supply and
heat demand. Integrating heat pumps may require a retrofit of the utility system.
Mathematical optimization is a useful tool to tackle this challenge by enabling
the analysis of correlation between relevant system parameters and equipment sizing.
This study demonstrates the utilization of mathematical optimization and parameter
studies for utility system equipment sizing addressing fluctuating heat supply
and demand profiles.
author:
- first_name: Thorben
full_name: Hochhaus, Thorben
last_name: Hochhaus
- first_name: Johannes
full_name: Wloch, Johannes
last_name: Wloch
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Hochhaus T, Wloch J, Grünewald M, Riese J. A Data-Driven Conceptual Approach
to Heat Pump Sizing in Chemical Processes with Fluctuating Heat Supply and Demand.
In: Systems and Control Transactions. Vol 4. PSE Press; 2025. doi:10.69997/sct.196662'
apa: Hochhaus, T., Wloch, J., Grünewald, M., & Riese, J. (2025). A Data-Driven
Conceptual Approach to Heat Pump Sizing in Chemical Processes with Fluctuating
Heat Supply and Demand. Systems and Control Transactions, 4. https://doi.org/10.69997/sct.196662
bibtex: '@inproceedings{Hochhaus_Wloch_Grünewald_Riese_2025, title={A Data-Driven
Conceptual Approach to Heat Pump Sizing in Chemical Processes with Fluctuating
Heat Supply and Demand}, volume={4}, DOI={10.69997/sct.196662},
booktitle={Systems and Control Transactions}, publisher={PSE Press}, author={Hochhaus,
Thorben and Wloch, Johannes and Grünewald, Marcus and Riese, Julia}, year={2025}
}'
chicago: Hochhaus, Thorben, Johannes Wloch, Marcus Grünewald, and Julia Riese. “A
Data-Driven Conceptual Approach to Heat Pump Sizing in Chemical Processes with
Fluctuating Heat Supply and Demand.” In Systems and Control Transactions,
Vol. 4. PSE Press, 2025. https://doi.org/10.69997/sct.196662.
ieee: 'T. Hochhaus, J. Wloch, M. Grünewald, and J. Riese, “A Data-Driven Conceptual
Approach to Heat Pump Sizing in Chemical Processes with Fluctuating Heat Supply
and Demand,” in Systems and Control Transactions, 2025, vol. 4, doi: 10.69997/sct.196662.'
mla: Hochhaus, Thorben, et al. “A Data-Driven Conceptual Approach to Heat Pump Sizing
in Chemical Processes with Fluctuating Heat Supply and Demand.” Systems and
Control Transactions, vol. 4, PSE Press, 2025, doi:10.69997/sct.196662.
short: 'T. Hochhaus, J. Wloch, M. Grünewald, J. Riese, in: Systems and Control Transactions,
PSE Press, 2025.'
date_created: 2025-07-02T07:52:30Z
date_updated: 2025-07-02T07:57:22Z
department:
- _id: '831'
doi: 10.69997/sct.196662
intvolume: ' 4'
language:
- iso: eng
publication: Systems and Control Transactions
publication_identifier:
issn:
- 2818-4734
publication_status: published
publisher: PSE Press
quality_controlled: '1'
status: public
title: A Data-Driven Conceptual Approach to Heat Pump Sizing in Chemical Processes
with Fluctuating Heat Supply and Demand
type: conference
user_id: '101499'
volume: 4
year: '2025'
...
---
_id: '62937'
abstract:
- lang: eng
text: Sandwich packings are assembled from two conventional structured packings
with different geometrical surface areas stacked alternatingly within a separation
column. When operated under partially flooded conditions, they provide significant
mass transfer improvement compared to common structured packings. In this work,
a rate-based model including novel mass transfer correlations is presented and
validated using a comprehensive experimental database for the reactive absorption
of CO2 into aqueous monoethanolamine. The proposed rate-based approach is capable
of accounting for axial dispersion, thereby enabling the evaluation of the effect
of liquid-phase backmixing on the mass transfer performance. The validated rate-based
model is used to evaluate the separation performance of sandwich packings. Compared
with structured packings, up to 10 % higher mass transfer rates are obtained.
article_number: '122681'
article_type: original
author:
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Uwe
full_name: Hampel, Uwe
last_name: Hampel
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: Franke P, Schubert M, Hampel U, Kenig EY. A rate-based model for reactive separation
columns with sandwich packings. Chemical Engineering Science. 2025;321.
doi:10.1016/j.ces.2025.122681
apa: Franke, P., Schubert, M., Hampel, U., & Kenig, E. Y. (2025). A rate-based
model for reactive separation columns with sandwich packings. Chemical Engineering
Science, 321, Article 122681. https://doi.org/10.1016/j.ces.2025.122681
bibtex: '@article{Franke_Schubert_Hampel_Kenig_2025, title={A rate-based model for
reactive separation columns with sandwich packings}, volume={321}, DOI={10.1016/j.ces.2025.122681},
number={122681}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Franke, Patrick and Schubert, Markus and Hampel, Uwe and Kenig, Eugeny
Y.}, year={2025} }'
chicago: Franke, Patrick, Markus Schubert, Uwe Hampel, and Eugeny Y. Kenig. “A Rate-Based
Model for Reactive Separation Columns with Sandwich Packings.” Chemical Engineering
Science 321 (2025). https://doi.org/10.1016/j.ces.2025.122681.
ieee: 'P. Franke, M. Schubert, U. Hampel, and E. Y. Kenig, “A rate-based model for
reactive separation columns with sandwich packings,” Chemical Engineering Science,
vol. 321, Art. no. 122681, 2025, doi: 10.1016/j.ces.2025.122681.'
mla: Franke, Patrick, et al. “A Rate-Based Model for Reactive Separation Columns
with Sandwich Packings.” Chemical Engineering Science, vol. 321, 122681,
Elsevier BV, 2025, doi:10.1016/j.ces.2025.122681.
short: P. Franke, M. Schubert, U. Hampel, E.Y. Kenig, Chemical Engineering Science
321 (2025).
date_created: 2025-12-08T07:40:18Z
date_updated: 2025-12-08T07:45:19Z
department:
- _id: '831'
doi: 10.1016/j.ces.2025.122681
intvolume: ' 321'
keyword:
- Sandwich packings Structured packings Rate-based approach Model validation Ultra-fast
X-ray tomography
language:
- iso: eng
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A rate-based model for reactive separation columns with sandwich packings
type: journal_article
user_id: '93922'
volume: 321
year: '2025'
...
---
_id: '52403'
author:
- first_name: Mohamad
full_name: Al Trjman, Mohamad
id: '65415'
last_name: Al Trjman
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
orcid: 0000-0003-3069-9601
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Al Trjman M, Meschut G, Salten AHJ, Kenig EY. Methodenentwicklung zur Simulation
des Viscous Fingering in Klebverbindungen von stahlintensiven Mischbaustrukturen.
In: ; 2024.'
apa: Al Trjman, M., Meschut, G., Salten, A. H. J., & Kenig, E. Y. (2024). Methodenentwicklung
zur Simulation des Viscous Fingering in Klebverbindungen von stahlintensiven Mischbaustrukturen.
Gemeinsame Forschung in der Klebtechnik, Köln.
bibtex: '@inproceedings{Al Trjman_Meschut_Salten_Kenig_2024, title={Methodenentwicklung
zur Simulation des Viscous Fingering in Klebverbindungen von stahlintensiven Mischbaustrukturen},
author={Al Trjman, Mohamad and Meschut, Gerson and Salten, Alexander Heinrich
Johannes and Kenig, Eugeny Y.}, year={2024} }'
chicago: Al Trjman, Mohamad, Gerson Meschut, Alexander Heinrich Johannes Salten,
and Eugeny Y. Kenig. “Methodenentwicklung Zur Simulation Des Viscous Fingering
in Klebverbindungen von Stahlintensiven Mischbaustrukturen,” 2024.
ieee: M. Al Trjman, G. Meschut, A. H. J. Salten, and E. Y. Kenig, “Methodenentwicklung
zur Simulation des Viscous Fingering in Klebverbindungen von stahlintensiven Mischbaustrukturen,”
presented at the Gemeinsame Forschung in der Klebtechnik, Köln, 2024.
mla: Al Trjman, Mohamad, et al. Methodenentwicklung Zur Simulation Des Viscous
Fingering in Klebverbindungen von Stahlintensiven Mischbaustrukturen. 2024.
short: 'M. Al Trjman, G. Meschut, A.H.J. Salten, E.Y. Kenig, in: 2024.'
conference:
end_date: 2024-02-28
location: Köln
name: Gemeinsame Forschung in der Klebtechnik
start_date: 2024-02-27
date_created: 2024-03-08T14:00:06Z
date_updated: 2024-03-08T14:01:49Z
department:
- _id: '831'
language:
- iso: eng
status: public
title: Methodenentwicklung zur Simulation des Viscous Fingering in Klebverbindungen
von stahlintensiven Mischbaustrukturen
type: conference_abstract
user_id: '59551'
year: '2024'
...
---
_id: '52573'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Dechert C, Kenig E. Der Einfluss von Mikrostrukturen auf die Flüssigkeitsausbreitung
in strukturierten Packungen. In: ; 2024.'
apa: Dechert, C., & Kenig, E. (2024). Der Einfluss von Mikrostrukturen auf
die Flüssigkeitsausbreitung in strukturierten Packungen. Jahrestreffen der
Fachgruppe Fluidverfahrenstechnik, Bochum.
bibtex: '@inproceedings{Dechert_Kenig_2024, title={Der Einfluss von Mikrostrukturen
auf die Flüssigkeitsausbreitung in strukturierten Packungen}, author={Dechert,
Christopher and Kenig, Eugeny}, year={2024} }'
chicago: Dechert, Christopher, and Eugeny Kenig. “Der Einfluss von Mikrostrukturen
Auf Die Flüssigkeitsausbreitung in Strukturierten Packungen,” 2024.
ieee: C. Dechert and E. Kenig, “Der Einfluss von Mikrostrukturen auf die Flüssigkeitsausbreitung
in strukturierten Packungen,” presented at the Jahrestreffen der Fachgruppe Fluidverfahrenstechnik,
Bochum, 2024.
mla: Dechert, Christopher, and Eugeny Kenig. Der Einfluss von Mikrostrukturen
Auf Die Flüssigkeitsausbreitung in Strukturierten Packungen. 2024.
short: 'C. Dechert, E. Kenig, in: 2024.'
conference:
end_date: 2024-03-06
location: Bochum
name: Jahrestreffen der Fachgruppe Fluidverfahrenstechnik
start_date: 2024-03-04
date_created: 2024-03-14T09:36:50Z
date_updated: 2024-03-14T09:37:04Z
department:
- _id: '9'
- _id: '831'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
status: public
title: Der Einfluss von Mikrostrukturen auf die Flüssigkeitsausbreitung in strukturierten
Packungen
type: conference_abstract
user_id: '69828'
year: '2024'
...
---
_id: '52579'
author:
- first_name: Iman
full_name: Hami Dindar, Iman
id: '54836'
last_name: Hami Dindar
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Hami Dindar I, Lutters N, Kenig EY. Wässrige Glucosaminlösung als neues Lösungsmittel
zur CO2-Abscheidung. In: ; 2024.'
apa: Hami Dindar, I., Lutters, N., & Kenig, E. Y. (2024). Wässrige Glucosaminlösung
als neues Lösungsmittel zur CO2-Abscheidung. DECHEMA/VDI - Fluidverfahrenstechnik
2024, Ruhr-Universität Bochum.
bibtex: '@inproceedings{Hami Dindar_Lutters_Kenig_2024, place={ Konferenz DECHEMA/VDI
- Fluidverfahrenstechnik 2024 an der Ruhr-Universität Bochum}, title={Wässrige
Glucosaminlösung als neues Lösungsmittel zur CO2-Abscheidung}, author={Hami Dindar,
Iman and Lutters, Nicole and Kenig, Eugeny Y.}, year={2024} }'
chicago: Hami Dindar, Iman, Nicole Lutters, and Eugeny Y. Kenig. “Wässrige Glucosaminlösung
Als Neues Lösungsmittel Zur CO2-Abscheidung.” Konferenz DECHEMA/VDI - Fluidverfahrenstechnik
2024 an der Ruhr-Universität Bochum, 2024.
ieee: I. Hami Dindar, N. Lutters, and E. Y. Kenig, “Wässrige Glucosaminlösung als
neues Lösungsmittel zur CO2-Abscheidung,” presented at the DECHEMA/VDI - Fluidverfahrenstechnik
2024, Ruhr-Universität Bochum, 2024.
mla: Hami Dindar, Iman, et al. Wässrige Glucosaminlösung Als Neues Lösungsmittel
Zur CO2-Abscheidung. 2024.
short: 'I. Hami Dindar, N. Lutters, E.Y. Kenig, in: Konferenz DECHEMA/VDI - Fluidverfahrenstechnik
2024 an der Ruhr-Universität Bochum, 2024.'
conference:
end_date: 2024-03-06
location: Ruhr-Universität Bochum
name: DECHEMA/VDI - Fluidverfahrenstechnik 2024
start_date: 2024-03-04
date_created: 2024-03-15T07:09:48Z
date_updated: 2024-06-26T06:10:44Z
department:
- _id: '9'
- _id: '831'
language:
- iso: eng
place: ' Konferenz DECHEMA/VDI - Fluidverfahrenstechnik 2024 an der Ruhr-Universität
Bochum'
status: public
title: Wässrige Glucosaminlösung als neues Lösungsmittel zur CO2-Abscheidung
type: conference_abstract
user_id: '22006'
year: '2024'
...
---
_id: '55368'
abstract:
- lang: eng
text: AbstractA comprehensive investigation of
the potential of aqueous glucosamine solutions as an eco‐friendly solvent for
CO2 capture was performed. It includes an experimental study
in a pilot plant setup and a theoretical analysis with a rate‐based model. The
model was validated against the measured column profiles of temperature and CO2
concentration in both liquid and gas phases. Model‐based parameter sensitivity
studies revealed inherent challenges for an effective absorption process. A slow
reaction rate and suboptimal chemical equilibrium conditions were identified as
key limitations, restricting the absorption efficiency and CO2
loading capacity of the glucosamine solution. Furthermore, an analysis of the
dissociation constant of this novel absorbent was performed and its significance
with respect to the (limited) performance, capability, and efficiency evaluation
was highlighted.
article_type: original
author:
- first_name: Iman
full_name: Hami Dindar, Iman
id: '54836'
last_name: Hami Dindar
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Hami Dindar I, Lutters N, Kenig EY. Carbon dioxide capture by aqueous glucosamine
solutions: Pilot plant measurements and a theoretical study. AIChE Journal.
Published online 2024. doi:10.1002/aic.18541'
apa: 'Hami Dindar, I., Lutters, N., & Kenig, E. Y. (2024). Carbon dioxide capture
by aqueous glucosamine solutions: Pilot plant measurements and a theoretical study.
AIChE Journal. https://doi.org/10.1002/aic.18541'
bibtex: '@article{Hami Dindar_Lutters_Kenig_2024, title={Carbon dioxide capture
by aqueous glucosamine solutions: Pilot plant measurements and a theoretical study},
DOI={10.1002/aic.18541}, journal={AIChE
Journal}, publisher={Wiley}, author={Hami Dindar, Iman and Lutters, Nicole and
Kenig, Eugeny Y.}, year={2024} }'
chicago: 'Hami Dindar, Iman, Nicole Lutters, and Eugeny Y. Kenig. “Carbon Dioxide
Capture by Aqueous Glucosamine Solutions: Pilot Plant Measurements and a Theoretical
Study.” AIChE Journal, 2024. https://doi.org/10.1002/aic.18541.'
ieee: 'I. Hami Dindar, N. Lutters, and E. Y. Kenig, “Carbon dioxide capture by aqueous
glucosamine solutions: Pilot plant measurements and a theoretical study,” AIChE
Journal, 2024, doi: 10.1002/aic.18541.'
mla: 'Hami Dindar, Iman, et al. “Carbon Dioxide Capture by Aqueous Glucosamine Solutions:
Pilot Plant Measurements and a Theoretical Study.” AIChE Journal, Wiley,
2024, doi:10.1002/aic.18541.'
short: I. Hami Dindar, N. Lutters, E.Y. Kenig, AIChE Journal (2024).
date_created: 2024-07-24T08:26:30Z
date_updated: 2024-07-24T11:46:54Z
department:
- _id: '9'
- _id: '831'
doi: 10.1002/aic.18541
funded_apc: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://aiche.onlinelibrary.wiley.com/doi/10.1002/aic.18541
oa: '1'
publication: AIChE Journal
publication_identifier:
issn:
- 0001-1541
- 1547-5905
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: 'Carbon dioxide capture by aqueous glucosamine solutions: Pilot plant measurements
and a theoretical study'
type: journal_article
user_id: '54836'
year: '2024'
...
---
_id: '56194'
author:
- first_name: Reza
full_name: Afsahnoudeh, Reza
id: '90390'
last_name: Afsahnoudeh
orcid: https://orcid.org/0009-0001-3161-8036
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Afsahnoudeh R, Riese J, Kenig EY. A Numerical Analysis of Thermo-Hydraulic
Performance of Pillow-Plate Heat Exchangers with Ellipsoidal Secondary Structures.
In: World Congress on Mechanical, Chemical, and Material Engineering. Avestia
Publishing; 2024. doi:10.11159/htff24.145'
apa: Afsahnoudeh, R., Riese, J., & Kenig, E. Y. (2024). A Numerical Analysis
of Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Ellipsoidal
Secondary Structures. World Congress on Mechanical, Chemical, and Material
Engineering. 10th International Conference on Heat Transfer and Fluid Flow,
Barcelona. https://doi.org/10.11159/htff24.145
bibtex: '@inproceedings{Afsahnoudeh_Riese_Kenig_2024, title={A Numerical Analysis
of Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Ellipsoidal
Secondary Structures}, DOI={10.11159/htff24.145},
booktitle={World Congress on Mechanical, Chemical, and Material Engineering},
publisher={Avestia Publishing}, author={Afsahnoudeh, Reza and Riese, Julia and
Kenig, Eugeny Y.}, year={2024} }'
chicago: Afsahnoudeh, Reza, Julia Riese, and Eugeny Y. Kenig. “A Numerical Analysis
of Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Ellipsoidal
Secondary Structures.” In World Congress on Mechanical, Chemical, and Material
Engineering. Avestia Publishing, 2024. https://doi.org/10.11159/htff24.145.
ieee: 'R. Afsahnoudeh, J. Riese, and E. Y. Kenig, “A Numerical Analysis of Thermo-Hydraulic
Performance of Pillow-Plate Heat Exchangers with Ellipsoidal Secondary Structures,”
presented at the 10th International Conference on Heat Transfer and Fluid Flow,
Barcelona, 2024, doi: 10.11159/htff24.145.'
mla: Afsahnoudeh, Reza, et al. “A Numerical Analysis of Thermo-Hydraulic Performance
of Pillow-Plate Heat Exchangers with Ellipsoidal Secondary Structures.” World
Congress on Mechanical, Chemical, and Material Engineering, Avestia Publishing,
2024, doi:10.11159/htff24.145.
short: 'R. Afsahnoudeh, J. Riese, E.Y. Kenig, in: World Congress on Mechanical,
Chemical, and Material Engineering, Avestia Publishing, 2024.'
conference:
end_date: 2024-08-24
location: Barcelona
name: 10th International Conference on Heat Transfer and Fluid Flow
start_date: 2024-08-22
date_created: 2024-09-23T07:28:01Z
date_updated: 2024-09-23T07:31:11Z
department:
- _id: '831'
doi: 10.11159/htff24.145
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: World Congress on Mechanical, Chemical, and Material Engineering
publication_identifier:
issn:
- 2369-8136
publication_status: published
publisher: Avestia Publishing
quality_controlled: '1'
status: public
title: A Numerical Analysis of Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers
with Ellipsoidal Secondary Structures
type: conference
user_id: '90390'
year: '2024'
...
---
_id: '56601'
author:
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
- first_name: Oorv
full_name: Devasthali, Oorv
last_name: Devasthali
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Uwe
full_name: Hampel, Uwe
last_name: Hampel
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Franke P, Devasthali O, Schubert M, Hampel U, Kenig EY. Experimental determination
of liquid-side mass transfer coefficients in sandwich packings in the preloading
zone and above the loading point. In: ; 2024.'
apa: Franke, P., Devasthali, O., Schubert, M., Hampel, U., & Kenig, E. Y. (2024).
Experimental determination of liquid-side mass transfer coefficients in sandwich
packings in the preloading zone and above the loading point. International
Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering (GLS-16), Dresden.
bibtex: '@inproceedings{Franke_Devasthali_Schubert_Hampel_Kenig_2024, title={Experimental
determination of liquid-side mass transfer coefficients in sandwich packings in
the preloading zone and above the loading point}, author={Franke, Patrick and
Devasthali, Oorv and Schubert, Markus and Hampel, Uwe and Kenig, Eugeny Y.}, year={2024}
}'
chicago: Franke, Patrick, Oorv Devasthali, Markus Schubert, Uwe Hampel, and Eugeny
Y. Kenig. “Experimental Determination of Liquid-Side Mass Transfer Coefficients
in Sandwich Packings in the Preloading Zone and above the Loading Point,” 2024.
ieee: P. Franke, O. Devasthali, M. Schubert, U. Hampel, and E. Y. Kenig, “Experimental
determination of liquid-side mass transfer coefficients in sandwich packings in
the preloading zone and above the loading point,” presented at the International
Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering (GLS-16), Dresden,
2024.
mla: Franke, Patrick, et al. Experimental Determination of Liquid-Side Mass Transfer
Coefficients in Sandwich Packings in the Preloading Zone and above the Loading
Point. 2024.
short: 'P. Franke, O. Devasthali, M. Schubert, U. Hampel, E.Y. Kenig, in: 2024.'
conference:
end_date: 2024-09-05
location: Dresden
name: International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering
(GLS-16)
start_date: 2024-09-02
date_created: 2024-10-12T19:28:56Z
date_updated: 2024-10-12T19:29:07Z
ddc:
- '040'
department:
- _id: '831'
file:
- access_level: closed
content_type: application/pdf
creator: frankep
date_created: 2024-10-12T19:26:58Z
date_updated: 2024-10-12T19:26:58Z
file_id: '56602'
file_name: GLS16-Long_Abstract_Franke.pdf
file_size: 714221
relation: main_file
success: 1
file_date_updated: 2024-10-12T19:26:58Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: Experimental determination of liquid-side mass transfer coefficients in sandwich
packings in the preloading zone and above the loading point
type: conference
user_id: '93922'
year: '2024'
...
---
_id: '52229'
article_number: '141434'
author:
- first_name: Bastian
full_name: Bruns, Bastian
last_name: Bruns
- first_name: Michel
full_name: Gross, Michel
last_name: Gross
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Valentin
full_name: Bertsch, Valentin
last_name: Bertsch
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Bruns B, Gross M, Grünewald M, Bertsch V, Riese J. A multi-step framework for
the design of a flexible power-to-methane process. Journal of Cleaner Production.
Published online 2024. doi:10.1016/j.jclepro.2024.141434
apa: Bruns, B., Gross, M., Grünewald, M., Bertsch, V., & Riese, J. (2024). A
multi-step framework for the design of a flexible power-to-methane process. Journal
of Cleaner Production, Article 141434. https://doi.org/10.1016/j.jclepro.2024.141434
bibtex: '@article{Bruns_Gross_Grünewald_Bertsch_Riese_2024, title={A multi-step
framework for the design of a flexible power-to-methane process}, DOI={10.1016/j.jclepro.2024.141434},
number={141434}, journal={Journal of Cleaner Production}, publisher={Elsevier
BV}, author={Bruns, Bastian and Gross, Michel and Grünewald, Marcus and Bertsch,
Valentin and Riese, Julia}, year={2024} }'
chicago: Bruns, Bastian, Michel Gross, Marcus Grünewald, Valentin Bertsch, and Julia
Riese. “A Multi-Step Framework for the Design of a Flexible Power-to-Methane Process.”
Journal of Cleaner Production, 2024. https://doi.org/10.1016/j.jclepro.2024.141434.
ieee: 'B. Bruns, M. Gross, M. Grünewald, V. Bertsch, and J. Riese, “A multi-step
framework for the design of a flexible power-to-methane process,” Journal of
Cleaner Production, Art. no. 141434, 2024, doi: 10.1016/j.jclepro.2024.141434.'
mla: Bruns, Bastian, et al. “A Multi-Step Framework for the Design of a Flexible
Power-to-Methane Process.” Journal of Cleaner Production, 141434, Elsevier
BV, 2024, doi:10.1016/j.jclepro.2024.141434.
short: B. Bruns, M. Gross, M. Grünewald, V. Bertsch, J. Riese, Journal of Cleaner
Production (2024).
date_created: 2024-03-01T13:34:23Z
date_updated: 2024-10-22T09:54:17Z
department:
- _id: '831'
doi: 10.1016/j.jclepro.2024.141434
keyword:
- Industrial and Manufacturing Engineering
- Strategy and Management
- General Environmental Science
- Renewable Energy
- Sustainability and the Environment
- Building and Construction
language:
- iso: eng
publication: Journal of Cleaner Production
publication_identifier:
issn:
- 0959-6526
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A multi-step framework for the design of a flexible power-to-methane process
type: journal_article
user_id: '101499'
year: '2024'
...